M. Rifki Fahrezi (2mn) - Painting Assigmentmaterial Kjp2

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

ASSIGNMENT

===================================================
======
Name : M. Rifki Fahrezi
Class : 2MN
PAINTING

Rub the surface of the wood with glass paper. This will make it smooth. Give the
surface one coat of priming paint. Use a flat brush. Paint across the grain first. Then paint with
light strokes along the grain. Let the first coat of paint dry.
Fill up any holes and cracks in the wood with putty. Rub the surface of the wood with
glasspaper. Brush away the dust. Put on the undercoat. Brush the paint well into the wood. Paint
across the grain first. Then paint with light strokes along the grain. Let the undercoat dry.
Make the surface smooth again with glasspaper brush away the dust. Put on the top
coat. Brush the paint well into the wood. Paint across the grain.
Do not put too much paint on your brush. Dip only the tip of the brush into the paint.
When you are not using your paint brushes, keep them clean. Clean them first with turpentine.
Then wash them in warm, soapy water.

Exercises

1.Vocabulary

Complete each of the sentences with one of the words in the box.

a. Put some ____ coat ___ along the bottom of the windows.
b. You have not painted the door every well. Put on another __Crack_____
c. The __surface_____of this piece of wood is not smooth.
d. You must paint across and along the ___ grain ____

Rub surface grain putty


Crack coat dip brush
ASSIGNMENT
===================================================
======

2.Comprehension

A. Answer these question about the pictures bellow.

a. What is the man doing?


b. What must the man do this piece of wood?
c. What is the man doing in the picture?
d. What is wrong with this man’s brushes?

B. Which of the answer a, b, c or d is correct?

(i) What can we clean paint brushes with?


a. glasspaper
b. putty
c. turpentine
d. priming paint

(ii) How can we make a piece of wood smooth?


a. We can rub it with turpentine.
b. We can paint across the grain
c. We can fill up the cracks with putty
d. We can use glasspaper

(iii) What you must we do with our paint brushes?


a. brush away the dust
b. rub them smooth
c. keep them clean
d. dip only the tips into turpentine

(iv) When do we use light strokes?


a. When we put on the undercoat
b. When we use priming paint
c. When we paint along the grain
d. When we brush away the dust

3.Language Practice

A. Most of the sentences in the passage are imperative statements


ASSIGNMENT
===================================================
======
Examples:
Let the first coat of paint dry.

Dip only the tip of the brush into the paint.

Make imperative statements from these words into the correct order:

a. The iron rod cut with a hacksaw ( Cut the iron rod with a hacksaw)
b. Into a vice the piece of metal put (Put the piece of metal into a vice)
c. With both hands hold the frame of the saw (Hold both hands with the
frame of the Saw)
d. A file use to make the end smooth (Use a file to make the end smooth)

B. Read these sentences:

(i) Rub the surface of the wood with glasspaper. (make _______ smooth)
(ii) This will make the surface of the wood smooth.

Now write sentences like (ii) for each of these statements:

a. Hold the piece of metal over a fire. (make _____ soft). This will make the
piece of metal soft.
b. Use your tools carefully. (keep _____ sharp). It will keep your tools
sharp
c. Put a piece of wood under the door. (hold _____ open). It will hold a
piece of wood under the door open
d. Wipe the window with a wet cloth. (make _____clean). This will make
the window with a wet cloth clean

4.Composition

Write Part 1 of “Using a Hacksaw” again. Use only imperative statements. Here
is parts 2, as an example:

Make the first small cut. Hold the frame of the saw with both hands. Saw frame of
the saw with both hands. Saw with light, slow strokes. When you pull the saw
back, do not press hard.

Answer :
Cut the iron rod with a hacksaw. Put the piece of metal into a vice.
Hold both hands with the frame of the Saw. Use a file to make the end
smooth.
ASSIGNMENT
===================================================
======

You might also like