Scribd
Upload
128 views73 pages

FCC Test Report (15.247)

This document is an FCC test report for a wireless device with model number DNUR-S2. It was tested between March 29 and March 31, 2013 at a testing facility in Taiwan. The report details the test results for various RF tests conducted on the device to verify compliance with FCC requirements, including radiated emission, 6dB bandwidth, conducted output power, power spectral density, and conducted out of band emission measurements in both the 2.4GHz and 5GHz bands. The test results in each section of the report indicate that the device passed all requirements for equipment authorization by the FCC.

Uploaded by

SIMAH CELAYA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views73 pages

FCC Test Report (15.247)

This document is an FCC test report for a wireless device with model number DNUR-S2. It was tested between March 29 and March 31, 2013 at a testing facility in Taiwan. The report details the test results for various RF tests conducted on the device to verify compliance with FCC requirements, including radiated emission, 6dB bandwidth, conducted output power, power spectral density, and conducted out of band emission measurements in both the 2.4GHz and 5GHz bands. The test results in each section of the report indicate that the device passed all requirements for equipment authorization by the FCC.

Uploaded by

SIMAH CELAYA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 73

FCC TEST REPORT (15.

247)

REPORT NO.: RF130321C09


MODEL NO.: DNUR-S2
FCC ID: VPQ-DNURS2
RECEIVED: Mar. 21, 2013
TESTED: Mar. 29 ~ Mar. 31, 2013
ISSUED: Apr. 08, 2013

APPLICANT: Trixell

ADDRESS: 460 rue du Pommarin, 38430 MOIRANS, France

ISSUED BY: Bureau Veritas Consumer Products Services


(H.K.) Ltd., Taoyuan Branch

LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,
New Taipei City, Taiwan, R.O.C.

TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei
Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C.

This report should not be used by the client to claim


product certification, approval, or endorsement by
TAF or any government agencies.

This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is
permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results
set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar
or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon
the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by
our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such
issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the
correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the
compliance or non-compliance to the specification.

Report No.: RF130321C09 1 of 73 Report Format Version 5.1.0


TABLE OF CONTENTS
RELEASE CONTROL RECORD ......................................................................................... 4
1. CERTIFICATION............................................................................................... 5
2. SUMMARY OF TEST RESULTS ...................................................................... 6
2.1 MEASUREMENT UNCERTAINTY .................................................................... 6
3. GENERAL INFORMATION ............................................................................... 7
3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7
3.2 DESCRIPTION OF TEST MODES ................................................................... 9
3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................. 10
3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 14
3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................ 15
3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................ 15
4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ..................................... 16
4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 16
4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...... 16
4.1.2 TEST INSTRUMENTS .................................................................................... 17
4.1.3 TEST PROCEDURES .................................................................................... 18
4.1.4 DEVIATION FROM TEST STANDARD........................................................... 18
4.1.5 TEST SETUP .................................................................................................. 19
4.1.6 EUT OPERATING CONDITIONS ................................................................... 19
4.1.7 TEST RESULTS ............................................................................................. 20
4.2 6dB BANDWIDTH MEASUREMENT .............................................................. 33
4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................... 33
4.2.2 TEST SETUP .................................................................................................. 33
4.2.3 TEST INSTRUMENTS .................................................................................... 33
4.2.4 TEST PROCEDURE ....................................................................................... 33
4.2.5 DEVIATION FROM TEST STANDARD........................................................... 33
4.2.6 EUT OPERATING CONDITIONS ................................................................... 33
4.2.7 TEST RESULTS ............................................................................................. 34
4.3 CONDUCTED OUTPUT POWER................................................................... 35
4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ................... 35
4.3.2 TEST SETUP .................................................................................................. 35
4.3.3 TEST INSTRUMENTS .................................................................................... 35
4.3.4 TEST PROCEDURES .................................................................................... 35
4.3.5 DEVIATION FROM TEST STANDARD........................................................... 36
4.3.6 EUT OPERATING CONDITIONS ................................................................... 36
4.3.7 TEST RESULTS ............................................................................................. 37
4.4 POWER SPECTRAL DENSITY MEASUREMENT ......................................... 38
4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ...................... 38
4.4.2 TEST SETUP .................................................................................................. 38
4.4.3 TEST INSTRUMENTS .................................................................................... 38
4.4.4 TEST PROCEDURE ....................................................................................... 38
4.4.5 DEVIATION FROM TEST STANDARD........................................................... 38
4.4.6 EUT OPERATING CONDITION...................................................................... 38
4.4.7 TEST RESULTS ............................................................................................. 39
4.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT ........................ 40
4.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT ..... 40
4.5.2 TEST SETUP .................................................................................................. 40
4.5.3 TEST INSTRUMENTS .................................................................................... 40
4.5.4 TEST PROCEDURE ....................................................................................... 40
4.5.5 DEVIATION FROM TEST STANDARD........................................................... 41

Report No.: RF130321C09 2 of 73 Report Format Version 5.1.0


4.5.6 EUT OPERATING CONDITION...................................................................... 41
4.5.7 TEST RESULTS ............................................................................................. 41
5. TEST TYPES AND RESULTS (FOR 5.0GHz BAND) ..................................... 48
5.1 RADIATED EMISSION MEASUREMENT ...................................................... 48
5.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................... 48
5.1.2 TEST INSTRUMENTS .................................................................................... 49
5.1.3 TEST PROCEDURES .................................................................................... 49
5.1.4 DEVIATION FROM TEST STANDARD........................................................... 49
5.1.5 TEST SETUP .................................................................................................. 49
5.1.6 EUT OPERATING CONDITIONS ................................................................... 49
5.1.7 TEST RESULTS ............................................................................................. 50
5.2 6dB BANDWIDTH MEASUREMENT .............................................................. 59
5.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................... 59
5.2.2 TEST SETUP .................................................................................................. 59
5.2.3 TEST INSTRUMENTS .................................................................................... 59
5.2.4 TEST PROCEDURE ....................................................................................... 59
5.2.5 DEVIATION FROM TEST STANDARD........................................................... 59
5.2.6 EUT OPERATING CONDITIONS ................................................................... 59
5.2.7 TEST RESULTS ............................................................................................. 60
5.3 CONDUCTED OUTPUT POWER................................................................... 61
5.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ................... 61
5.3.2 TEST SETUP .................................................................................................. 61
5.3.3 INSTRUMENTS .............................................................................................. 61
5.3.4 TEST PROCEDURES .................................................................................... 61
5.3.5 DEVIATION FROM TEST STANDARD........................................................... 61
5.3.6 EUT OPERATING CONDITIONS ................................................................... 61
5.3.7 TEST RESULTS ............................................................................................. 62
5.4 POWER SPECTRAL DENSITY MEASUREMENT ......................................... 63
5.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ...................... 63
5.4.2 TEST SETUP .................................................................................................. 63
5.4.3 TEST INSTRUMENTS .................................................................................... 63
5.4.4 TEST PROCEDURE. ...................................................................................... 63
5.4.5 DEVIATION FROM TEST STANDARD........................................................... 63
5.4.6 EUT OPERATING CONDITION...................................................................... 63
5.4.7 TEST RESULTS ............................................................................................. 64
5.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT ........................ 65
5.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT ..... 65
5.5.2 TEST SETUP .................................................................................................. 65
5.5.3 TEST INSTRUMENTS .................................................................................... 65
5.5.4 TEST PROCEDURE ....................................................................................... 65
5.5.5 DEVIATION FROM TEST STANDARD........................................................... 65
5.5.6 EUT OPERATING CONDITION...................................................................... 65
5.5.7 TEST RESULTS ............................................................................................. 65
6. PHOTOGRAPHS OF THE TEST CONFIGURATION ..................................... 71
7. INFORMATION ON THE TESTING LABORATORIES ................................... 72
8. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING
CHANGES TO THE EUT BY THE LAB .......................................................... 73

Report No.: RF130321C09 3 of 73 Report Format Version 5.1.0


RELEASE CONTROL RECORD

ISSUE NO. REASON FOR CHANGE DATE ISSUED


RF130321C09 Original release Apr. 08, 2013

Report No.: RF130321C09 4 of 73 Report Format Version 5.1.0


1. CERTIFICATION
PRODUCT: 802.11 abgn 2x2 USB Wifi Module
MODEL NO.: DNUR-S2
BRAND: Unex
APPLICANT: Trixell
TESTED: Mar. 29 ~ Mar. 31, 2013
TEST SAMPLE: ENGINEERING SAMPLE
STANDARDS: FCC Part 15, Subpart C (Section 15.247)
ANSI C63.10-2009

The above equipment (model: DNUR-S2) has been tested by Bureau Veritas
Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found
compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are
true and accurate accounts of the measurements of the sample’s EMC
characteristics under the conditions specified in this report.

PREPARED BY : , DATE : Apr. 08, 2013


Pettie Chen / Senior Specialist

APPROVED BY : , DATE : Apr. 08, 2013


Ken Liu / Senior Manager

Report No.: RF130321C09 5 of 73 Report Format Version 5.1.0


2. SUMMARY OF TEST RESULTS
The EUT has been tested according to the following specifications:

APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247)

STANDARD
TEST TYPE RESULT REMARK
SECTION
Without AC power port of the
15.207 AC Power Conducted Emission NA
EUT.
15.247(d) Meet the requirement of limit.
Radiated Emissions PASS Minimum passing margin is
15.209 -4.8dB at 5850.00MHz.
15.247(d) Band Edge Measurement PASS Meet the requirement of limit.
15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit.
15.247(b) Conducted power PASS Meet the requirement of limit.
15.247(e) Power Spectral Density PASS Meet the requirement of limit.
Antenna connector is IPEX
MHF Connector (U.FL
15.203 Antenna Requirement PASS
compatible) not a standard
connector.

2.1 MEASUREMENT UNCERTAINTY


Where relevant, the following measurement uncertainty levels have been estimated
for tests performed on the EUT as specified in CISPR 16-4-2:

MEASUREMENT FREQUENCY UNCERTAINTY


30MHz ~ 200MHz 3.34 dB
200MHz ~1000MHz 3.35 dB
Radiated emissions
1GHz ~ 18GHz 2.26 dB
18GHz ~ 40GHz 1.94 dB

This uncertainty represents an expanded uncertainty expressed at approximately


the 95% confidence level using a coverage factor of k = 2.

Report No.: RF130321C09 6 of 73 Report Format Version 5.1.0


3. GENERAL INFORMATION
3.1 GENERAL DESCRIPTION OF EUT
EUT 802.11 abgn 2x2 USB Wifi Module
MODEL NO. DNUR-S2
POWER SUPPLY 12Vdc (host equipment)
CCK, DQPSK, DBPSK for DSSS
MODULATION TYPE
64QAM, 16QAM, QPSK, BPSK for OFDM
MODULATION TECHNOLOGY DSSS, OFDM
802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps
802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps
TRANSFER RATE
802.11a: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps
802.11n: up to 300.0Mbps
2.4GHz: 2412 ~ 2462MHz
OPERATING FREQUENCY
5.0GHz: 5745 ~ 5825MHz
2.4GHz:
11 for 802.11b, 802.11g, 802.11n (20MHz)
7 for 802.11n (40MHz)
NUMBER OF CHANNEL
5.0GHz:
5 for 802.11a, 802.11n (20MHz)
2 for 802.11n (40MHz)
4.688mW for 2412 ~ 2462MHz
OUTPUT POWER
1.746mW for 5745 ~ 5825MHz
2.4GHz: Dipole antenna with 3.0dBi gain
ANTENNA TYPE
5.0GHz: Dipole antenna with 5.5dBi gain
ANTENNA CONNECTOR IPEX MHF Connector (U.FL compatible)
DATA CABLE NA
I/O PORTS Refer to user’s manual
ACCESSORY DEVICES NA

Report No.: RF130321C09 7 of 73 Report Format Version 5.1.0


NOTE:
1. The EUT provides two completed transmitters and two receivers.
MODULATION MODE TX FUNCTION
802.11b 1TX
802.11g 1TX
802.11a 1TX
802.11n (20MHz) 2TX
802.11n (40MHz) 2TX
2. The EUT is only used in the following end product. All models are listed as below. The EUT
install to end product are material, electrically identical, different model names and size are for
different appearance.
Product Brand Model Difference
Pixium 3543EZ 35*43 cm2 Cassette sized
X-ray detector Trixell Pixium 3543EZh 35*43 cm2 Handle version
Pixium 2430EZ 24*30 cm2 Cassette sized
* After pre-testing each model, the model: Pixium 2430EZ is the worst for the final test.
3. The above EUT information is declared by manufacturer and for more detailed features
description, please refer to the manufacturer's specifications or user's manual.

Report No.: RF130321C09 8 of 73 Report Format Version 5.1.0


3.2 DESCRIPTION OF TEST MODES

FOR 2.4GHz:
11 channels are provided for 802.11b, 802.11g and 802.11n (20MHz):
CHANNEL FREQUENCY CHANNEL FREQUENCY
1 2412MHz 7 2442MHz
2 2417MHz 8 2447MHz
3 2422MHz 9 2452MHz
4 2427MHz 10 2457MHz
5 2432MHz 11 2462MHz
6 2437MHz

7 channels are provided for 802.11n (40MHz):


CHANNEL FREQUENCY CHANNEL FREQUENCY
3 2422MHz 7 2442MHz
4 2427MHz 8 2447MHz
5 2432MHz 9 2452MHz
6 2437MHz

FOR 5.0GHz (5745 ~ 5825MHz):


5 channels are provided for 802.11a, 802.11n (20MHz):
CHANNEL FREQUENCY CHANNEL FREQUENCY
149 5745MHz 161 5805MHz
153 5765MHz 165 5825MHz
157 5785MHz

2 channels are provided for 802.11n (40MHz):


CHANNEL FREQUENCY CHANNEL FREQUENCY
151 5755MHz 159 5795MHz

Report No.: RF130321C09 9 of 73 Report Format Version 5.1.0


3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL

FOR 2.4GHz:
EUT APPLICABLE TO
CONFIGURE DESCRIPTION
MODE RE≥1G RE<1G PLC APCM

- √ √ NOTE 2 √ -
Where RE≥1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz
PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement

NOTE 1:
The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane.
NOTE 2: No need to concern of Conducted Emission due to the EUT is powered by power supply.

RADIATED EMISSION TEST (ABOVE 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1.0
- 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6.0
- 802.11n (20MHz) 1 to 11 1, 6, 11 OFDM BPSK 7.2
- 802.11n (40MHz) 3 to 9 3, 6, 9 OFDM BPSK 15.0

RADIATED EMISSION TEST (BELOW 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11n (20MHz) 1 to 11 1 OFDM BPSK 7.2

Report No.: RF130321C09 10 of 73 Report Format Version 5.1.0


BANDEDGE MEASUREMENT:

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11b 1 to 11 1, 11 DSSS DBPSK 1.0

- 802.11g 1 to 11 1, 11 OFDM BPSK 6.0

- 802.11n (20MHz) 1 to 11 1, 11 OFDM BPSK 7.2

- 802.11n (40MHz) 3 to 9 3, 9 OFDM BPSK 15.0

ANTENNA PORT CONDUCTED MEASUREMENT:

This item includes all test value of each mode, but only includes spectrum plot of worst value of
each mode.
Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1.0

- 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6.0

- 802.11n (20MHz) 1 to 11 1, 6, 11 OFDM BPSK 7.2

- 802.11n (40MHz) 3 to 9 3, 6, 9 OFDM BPSK 15.0

TEST CONDITION:

APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY


RE≥1G 25deg. C, 65%RH 120Vac, 60Hz Sun Lin
RE<1G 25deg. C, 65%RH 120Vac, 60Hz Brad Tung
APCM 25deg. C, 60%RH 120Vac, 60Hz Nick Chen

Report No.: RF130321C09 11 of 73 Report Format Version 5.1.0


FOR 5.0GHz (5745 ~ 5825MHz):
EUT APPLICABLE TO
CONFIGURE DESCRIPTION
MODE RE≥1G RE<1G PLC APCM

- √ √ NOTE 2 √ -
Where RE≥1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz
PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement

NOTE 1:
The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane.
NOTE 2: No need to concern of Conducted Emission due to the EUT is powered by power supply.

RADIATED EMISSION TEST (ABOVE 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11a 149 to 165 149, 157, 165 OFDM BPSK 6.0
- 802.11n (20MHz) 149 to 165 149, 157, 165 OFDM BPSK 7.2
- 802.11n (40MHz) 151 to 159 151, 159 OFDM BPSK 15.0

RADIATED EMISSION TEST (BELOW 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11n (20MHz) 149 to 165 149 OFDM BPSK 7.2

Report No.: RF130321C09 12 of 73 Report Format Version 5.1.0


BANDEDGE MEASUREMENT:

Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11a 149 to 165 149, 165 OFDM BPSK 6.0
- 802.11n (20MHz) 149 to 165 149, 165 OFDM BPSK 7.2
- 802.11n (40MHz) 151 to 159 151, 159 OFDM BPSK 15.0

ANTENNA PORT CONDUCTED MEASUREMENT:

This item includes all test value of each mode, but only includes spectrum plot of worst value of
each mode.
Pre-Scan has been conducted to determine the worst-case mode from all possible
combinations between available modulations, data rates and antenna ports (if EUT with
antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT DATA
AVAILABLE TESTED MODULATION MODULATION
CONFIGURE MODE RATE
CHANNEL CHANNEL TECHNOLOGY TYPE
MODE (Mbps)
- 802.11a 149 to 165 149, 157, 165 OFDM BPSK 6.0
- 802.11n (20MHz) 149 to 165 149, 157, 165 OFDM BPSK 7.2
- 802.11n (40MHz) 151 to 159 151, 159 OFDM BPSK 15.0

TEST CONDITION:

APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY


RE≥1G 25deg. C, 65%RH 120Vac, 60Hz Sun Lin
RE<1G 25deg. C, 65%RH 120Vac, 60Hz Brad Tung
APCM 25deg. C, 60%RH 120Vac, 60Hz Nick Chen

Report No.: RF130321C09 13 of 73 Report Format Version 5.1.0


3.3 DESCRIPTION OF SUPPORT UNITS

The EUT has been tested as an independent unit together with other necessary
accessories or support units. The following support units or accessories were
used to form a representative test configuration during the tests.

NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID


1 Notebook DELL E5420 33MKMQ1 FCC DoC Approved
2 X-ray detector Trixell Pixium 2430EZ NA NA
3 DC Power supply TOPWARD 6603D 802001 NA

NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS


1 NA
2 NA
3 NA

NOTE:
1. All power cords of the above support units are non-shielded (1.8 m).
2. Item 1 acted as a communication partner to transfer data.
3. Item 2 was provided by client.

Report No.: RF130321C09 14 of 73 Report Format Version 5.1.0


3.3.1 CONFIGURATION OF SYSTEM UNDER TEST

DC Power
Supply

EUT
X-ray detector

(Power from host equipment)

*Test Table

Notebook

*Kept in a remote area

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS

The EUT is a RF Product. According to the specifications of the manufacturer, it


must comply with the requirements of the following standards:

FCC Part 15, Subpart C (15.247)


558074 D01 DTS Meas Guidance v02
662911 D01 Multiple Transmitter Output v01 r02
ANSI C63.10-2009

All test items have been performed and recorded as per the above standards.

NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to
computer is necessary for typical use. It has been verified to comply with the requirements
of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately.

Report No.: RF130321C09 15 of 73 Report Format Version 5.1.0


4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND)

4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT

4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT

Radiated emissions which fall in the restricted bands must comply with the
radiated emission limits specified as below table. Other emissions shall be at
least 20dB below the highest level of the desired power:

FREQUENCIES FIELD STRENGTH MEASUREMENT DISTANCE


(MHz) (microvolts/meter) (meters)

0.009 ~ 0.490 2400/F(kHz) 300


0.490 ~ 1.705 24000/F(kHz) 30
1.705 ~ 30.0 30 30
30 ~ 88 100 3
88 ~ 216 150 3
216 ~ 960 200 3
Above 960 500 3
NOTE:
1. The lower limit shall apply at the transition frequencies.
2. Emission level (dBuV/m) = 20 log Emission level (uV/m).
3. For frequencies above 1000MHz, the field strength limits are based on average detector,
however, the peak field strength of any emission shall not exceed the maximum permitted
average limits, specified above by more than 20dB under any condition of modulation.

Report No.: RF130321C09 16 of 73 Report Format Version 5.1.0


4.1.2 TEST INSTRUMENTS

DESCRIPTION & DATE OF DUE DATE OF


MODEL NO. SERIAL NO.
MANUFACTURER CALIBRATION CALIBRATION
Test Receiver
ESIB7 100212 Aug. 06, 2012 Aug. 05, 2013
ROHDE & SCHWARZ
Spectrum Analyzer
FSP40 100039 Jan. 31, 2013 Jan. 30, 2014
ROHDE & SCHWARZ
BILOG Antenna
VULB9168 9168-160 Apr. 06, 2012 Apr. 05, 2013
SCHWARZBECK
HORN Antenna
9120D 209 Sep. 03, 2012 Sep. 02, 2013
SCHWARZBECK
HORN Antenna
BBHA 9170 148 Jul. 11, 2012 Jul. 10, 2013
SCHWARZBECK
Loop Antenna HFH2-Z2 100070 Jan. 31, 2012 Jan. 30, 2014
Preamplifier
8447D 2944A10633 Oct. 25, 2012 Oct. 24, 2013
Agilent
Preamplifier
8449B 3008A01964 Oct. 25, 2012 Oct. 24, 2013
Agilent
RF signal cable
SUCOFLEX 104 250723/4 Aug. 28, 2012 Aug. 27, 2013
HUBER+SUHNNER
RF signal cable 12738/6+309224/
SUCOFLEX 106 Aug. 28, 2012 Aug. 27, 2013
HUBER+SUHNNER 4
Software ADT_Radiated_
NA NA NA
ADT. V7.6.15.9.2
Antenna Tower
MA 4000 013303 NA NA
inn-co GmbH
Antenna Tower
Controller CO2000 017303 NA NA
inn-co GmbH
Turn Table
TT100 TT93021703 NA NA
ADT.
Turn Table Controller
SC100 SC93021703 NA NA
ADT.
High Speed Peak
ML2495A 0842014 Apr. 28, 2012 Apr. 27, 2013
Power Meter
Power Sensor MA2411B 0738404 Apr. 28, 2012 Apr. 27, 2013
NOTE: 1. The calibration interval of the above test instruments is 12 months and the
calibrations are traceable to NML/ROC and NIST/USA.
2. The calibration interval of the loop antenna is 24 months and the calibrations are
traceable to NML/ROC and NIST/USA.
3. The test was performed in HwaYa Chamber 3.
4. The horn antenna and HP preamplifier (model: 8449B) are used only for the
measurement of emission frequency above 1GHz if tested.
5. The FCC Site Registration No. is 988962.
6. The IC Site Registration No. is IC 7450F-3.

Report No.: RF130321C09 17 of 73 Report Format Version 5.1.0


4.1.3 TEST PROCEDURES

a. The EUT was placed on the top of a rotating table 0.8 meters above the ground
at a 3 meters semi-anechoic chamber. The table was rotated 360 degrees to
determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna,
which was mounted on the top of a variable-height antenna tower.
c. The antenna is a broadband antenna, and its height is varied from one meter to
four meters above the ground to determine the maximum value of the field
strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then
the antenna was tuned to heights from 1 meter to 4 meters and the rotatable
table was turned from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to Peak Detect Function and Specified
Bandwidth with Maximum Hold Mode.
f. If the emission level of the EUT in peak mode was lower than the limit specified,
then testing could be stopped and the peak values of the EUT would be
reported. Otherwise the emissions would be re-tested one by one using peak,
quasi-peak or average method as specified and then reported in a data sheet.

NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for
Quasi-peak detection at frequency below 1GHz.
2. The resolution bandwidth of test receiver/spectrum analyzer is 100kHz and video bandwidth is
300kHz for Peak detection at frequency above 1GHz.
3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth
is 1kHz for Average detection (AV) at frequency above 1GHz.
4. All modes of operation were investigated and the worst-case emissions are reported.

4.1.4 DEVIATION FROM TEST STANDARD

No deviation.

Report No.: RF130321C09 18 of 73 Report Format Version 5.1.0


4.1.5 TEST SETUP

For the actual test configuration, please refer to the attached file (Test Setup
Photo).

4.1.6 EUT OPERATING CONDITIONS

a. Installed the EUT into the X-ray detector and placed them on the testing
table.
b. Prepared notebook to act as a communication partner and placed it
outside of testing area.
c. The communication partner connected with EUT and run a test program
(provided by manufacturer) to enable EUT under transmission condition
continuously at specific channel frequency.

Report No.: RF130321C09 19 of 73 Report Format Version 5.1.0


4.1.7 TEST RESULTS
ABOVE 1GHz DATA：

802.11b
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 1 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 56.0 PK 74.0 -18.0 1.34 H 258 25.20 30.80
2 2390.00 46.2 AV 54.0 -7.8 1.34 H 258 15.40 30.80
3 *2412.00 88.4 PK 1.34 H 285 57.50 30.90
4 *2412.00 81.1 AV 1.34 H 285 50.20 30.90
5 4824.00 46.6 PK 74.0 -27.4 1.37 H 288 9.60 37.00
6 4824.00 35.7 AV 54.0 -18.3 1.37 H 288 -1.30 37.00
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 55.6 PK 74.0 -18.4 1.08 V 253 24.80 30.80
2 2390.00 46.0 AV 54.0 -8.0 1.08 V 253 15.20 30.80
3 *2412.00 85.2 PK 1.08 V 253 54.30 30.90
4 *2412.00 76.7 AV 1.08 V 253 45.80 30.90
5 4824.00 46.4 PK 74.0 -27.6 1.28 V 147 9.40 37.00
6 4824.00 34.4 AV 54.0 -19.6 1.28 V 147 -2.60 37.00
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 20 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 6 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 88.7 PK 1.29 H 262 57.70 31.00
2 *2437.00 81.5 AV 1.29 H 262 50.50 31.00
3 4874.00 46.8 PK 74.0 -27.2 1.28 H 301 9.70 37.10
4 4874.00 35.8 AV 54.0 -18.2 1.28 H 301 -1.30 37.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 85.6 PK 1.12 V 257 54.60 31.00
2 *2437.00 76.8 AV 1.12 V 257 45.80 31.00
3 4874.00 46.8 PK 74.0 -27.2 1.32 V 152 9.70 37.10
4 4874.00 34.8 AV 54.0 -19.2 1.32 V 152 -2.30 37.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 21 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 11 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 90.3 PK 1.30 H 347 59.20 31.10
2 *2462.00 82.2 AV 1.30 H 347 51.10 31.10
3 2483.50 56.8 PK 74.0 -17.2 1.30 H 347 25.60 31.20
4 2483.50 47.2 AV 54.0 -6.8 1.30 H 347 16.00 31.20
5 4924.00 46.2 PK 74.0 -27.8 1.39 H 304 9.00 37.20
6 4924.00 35.4 AV 54.0 -18.6 1.39 H 304 -1.80 37.20
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 85.6 PK 1.04 V 269 54.50 31.10
2 *2462.00 76.9 AV 1.04 V 269 45.80 31.10
3 2483.50 55.2 PK 74.0 -18.8 1.04 V 269 24.00 31.20
4 2483.50 45.8 AV 54.0 -8.2 1.04 V 269 14.60 31.20
5 4924.00 45.9 PK 74.0 -28.1 1.22 V 152 8.70 37.20
6 4924.00 35.0 AV 54.0 -19.0 1.22 V 152 -2.20 37.20
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 22 of 73 Report Format Version 5.1.0


802.11g
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 1 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 56.3 PK 74.0 -17.7 1.34 H 29 25.50 30.80
2 2390.00 46.0 AV 54.0 -8.0 1.34 H 29 15.20 30.80
3 *2412.00 90.1 PK 1.34 H 29 59.20 30.90
4 *2412.00 82.8 AV 1.34 H 29 51.90 30.90
5 4824.00 46.6 PK 74.0 -27.4 1.32 H 296 9.60 37.00
6 4824.00 35.6 AV 54.0 -18.4 1.32 H 296 -1.40 37.00
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 57.0 PK 74.0 -17.0 1.08 V 253 26.20 30.80
2 2390.00 46.5 AV 54.0 -7.5 1.08 V 253 15.70 30.80
3 *2412.00 84.9 PK 1.08 V 253 54.00 30.90
4 *2412.00 77.9 AV 1.08 V 253 47.00 30.90
5 4824.00 45.2 PK 74.0 -28.8 1.32 V 152 8.20 37.00
6 4824.00 35.4 AV 54.0 -18.6 1.32 V 152 -1.60 37.00
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 23 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 6 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 90.5 PK 1.39 H 32 59.50 31.00
2 *2437.00 83.1 AV 1.39 H 32 52.10 31.00
3 4874.00 46.8 PK 74.0 -27.2 1.34 H 301 9.70 37.10
4 4874.00 35.8 AV 54.0 -18.2 1.34 H 301 -1.30 37.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 85.2 PK 1.02 V 265 54.20 31.00
2 *2437.00 78.0 AV 1.02 V 265 47.00 31.00
3 4874.00 45.6 PK 74.0 -28.4 1.29 V 162 8.50 37.10
4 4874.00 35.8 AV 54.0 -18.2 1.29 V 162 -1.30 37.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 24 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 11 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 90.7 PK 1.06 H 12 59.60 31.10
2 *2462.00 83.7 AV 1.06 H 12 52.60 31.10
3 2483.50 57.0 PK 74.0 -17.0 1.06 H 12 25.80 31.20
4 2483.50 46.5 AV 54.0 -7.5 1.06 H 12 15.30 31.20
5 4924.00 46.9 PK 74.0 -27.1 1.37 H 305 9.70 37.20
6 4924.00 35.8 AV 54.0 -18.2 1.37 H 305 -1.40 37.20
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 85.2 PK 1.29 V 148 54.10 31.10
2 *2462.00 78.0 AV 1.29 V 148 46.90 31.10
3 2483.50 56.4 PK 74.0 -17.6 1.29 V 148 25.20 31.20
4 2483.50 46.2 AV 54.0 -7.8 1.29 V 148 15.00 31.20
5 4924.00 45.8 PK 74.0 -28.2 1.28 V 137 8.60 37.20
6 4924.00 35.8 AV 54.0 -18.2 1.28 V 137 -1.40 37.20
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 25 of 73 Report Format Version 5.1.0


802.11n (20MHz)
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 1 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 56.5 PK 74.0 -17.5 1.05 H 16 25.70 30.80
2 2390.00 46.3 AV 54.0 -7.7 1.05 H 16 15.50 30.80
3 *2412.00 86.7 PK 1.12 H 7 55.80 30.90
4 *2412.00 78.5 AV 1.12 H 7 47.60 30.90
5 4824.00 47.7 PK 74.0 -26.3 1.04 H 196 10.70 37.00
6 4824.00 36.8 AV 54.0 -17.2 1.04 H 196 -0.20 37.00
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 55.4 PK 74.0 -18.6 1.07 V 254 24.60 30.80
2 2390.00 45.1 AV 54.0 -8.9 1.07 V 254 14.30 30.80
3 *2412.00 81.3 PK 1.07 V 254 50.40 30.90
4 *2412.00 73.4 AV 1.07 V 254 42.50 30.90
5 4824.00 45.8 PK 74.0 -28.2 1.28 V 307 8.80 37.00
6 4824.00 35.5 AV 54.0 -18.5 1.28 V 307 -1.50 37.00
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 26 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 6 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 86.9 PK 1.08 H 15 55.90 31.00
2 *2437.00 78.6 AV 1.08 H 15 47.60 31.00
3 4874.00 47.2 PK 74.0 -26.8 1.08 H 202 10.10 37.10
4 4874.00 36.4 AV 54.0 -17.6 1.08 H 202 -0.70 37.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 81.5 PK 1.05 V 258 50.50 31.00
2 *2437.00 73.5 AV 1.05 V 258 42.50 31.00
3 4874.00 46.2 PK 74.0 -27.8 1.22 V 298 9.10 37.10
4 4874.00 35.8 AV 54.0 -18.2 1.22 V 298 -1.30 37.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 27 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 11 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 88.9 PK 1.04 H 23 57.80 31.10
2 *2462.00 80.5 AV 1.04 H 23 49.40 31.10
3 2483.50 56.7 PK 74.0 -17.3 1.04 H 23 25.50 31.20
4 2483.50 46.8 AV 54.0 -7.2 1.04 H 23 15.60 31.20
5 4924.00 47.2 PK 74.0 -26.8 1.05 H 189 10.00 37.20
6 4924.00 36.5 AV 54.0 -17.5 1.05 H 189 -0.70 37.20
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2462.00 83.4 PK 1.02 V 262 52.30 31.10
2 *2462.00 75.8 AV 1.02 V 262 44.70 31.10
3 2483.50 55.4 PK 74.0 -18.6 1.02 V 262 24.20 31.20
4 2483.50 45.8 AV 54.0 -8.2 1.02 V 262 14.60 31.20
5 4924.00 45.4 PK 74.0 -28.6 1.32 V 299 8.20 37.20
6 4924.00 35.2 AV 54.0 -18.8 1.32 V 299 -2.00 37.20
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 28 of 73 Report Format Version 5.1.0


802.11n (40MHz)
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 3 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 56.0 PK 74.0 -18.0 1.06 H 10 25.20 30.80
2 2390.00 46.2 AV 54.0 -7.8 1.06 H 10 15.40 30.80
3 *2422.00 85.5 PK 1.06 H 10 54.60 30.90
4 *2422.00 78.4 AV 1.06 H 10 47.50 30.90
5 4844.00 46.4 PK 74.0 -27.6 1.02 H 202 9.40 37.00
6 4844.00 35.6 AV 54.0 -18.4 1.02 H 202 -1.40 37.00
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 2390.00 54.5 PK 74.0 -19.5 1.05 V 252 23.70 30.80
2 2390.00 45.3 AV 54.0 -8.7 1.05 V 252 14.50 30.80
3 *2422.00 79.5 PK 1.08 V 252 48.60 30.90
4 *2422.00 72.4 AV 1.08 V 252 41.50 30.90
5 4844.00 45.7 PK 74.0 -28.3 1.32 V 312 8.70 37.00
6 4844.00 35.8 AV 54.0 -18.2 1.32 V 312 -1.20 37.00
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 29 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 6 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 85.8 PK 1.08 H 7 54.80 31.00
2 *2437.00 78.6 AV 1.08 H 7 47.60 31.00
3 4874.00 46.7 PK 74.0 -27.3 1.08 H 183 9.60 37.10
4 4874.00 35.9 AV 54.0 -18.1 1.08 H 183 -1.20 37.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2437.00 79.9 PK 1.08 V 247 48.90 31.00
2 *2437.00 72.6 AV 1.08 V 247 41.60 31.00
3 4874.00 45.8 PK 74.0 -28.2 1.28 V 309 8.70 37.10
4 4874.00 36.2 AV 54.0 -17.8 1.28 V 309 -0.90 37.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 30 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 9 FREQUENCY RANGE 1 ~ 25GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2452.00 86.8 PK 1.02 H 12 55.70 31.10
2 *2452.00 79.5 AV 1.02 H 12 48.40 31.10
3 2483.50 56.4 PK 74.0 -17.6 1.02 H 12 25.20 31.20
4 2483.50 46.0 AV 54.0 -8.0 1.02 H 12 14.80 31.20
5 4904.00 46.8 PK 74.0 -27.2 1.08 H 198 9.60 37.20
6 4904.00 35.8 AV 54.0 -18.2 1.08 H 198 -1.40 37.20
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *2452.00 80.6 PK 1.02 V 236 49.50 31.10
2 *2452.00 73.6 AV 1.02 V 236 42.50 31.10
3 2483.50 56.0 PK 74.0 -18.0 1.02 V 236 24.80 31.20
4 2483.50 45.8 AV 54.0 -8.2 1.02 V 236 14.60 31.20
5 4904.00 46.8 PK 74.0 -27.2 1.28 V 298 9.60 37.20
6 4904.00 35.9 AV 54.0 -18.1 1.28 V 298 -1.30 37.20
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.

Report No.: RF130321C09 31 of 73 Report Format Version 5.1.0


BELOW 1GHz WORST-CASE DATA：802.11n (20MHz)

EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 1 FREQUENCY RANGE Below 1000MHz

INPUT POWER DETECTOR


120Vac, 60 Hz Quasi-Peak
(SYSTEM) FUNCTION
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Brad Tung
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 57.12 26.9 QP 40.0 -13.1 1.50 H 6 13.30 13.60
2 103.78 27.0 QP 43.5 -16.5 1.25 H 57 17.30 9.70
3 175.72 25.1 QP 43.5 -18.4 1.00 H 100 12.10 13.00
4 249.60 21.9 QP 46.0 -24.1 1.50 H 208 8.70 13.20
5 352.65 24.2 QP 46.0 -21.8 1.00 H 248 7.80 16.40
6 500.42 23.9 QP 46.0 -22.1 1.00 H 176 3.80 20.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 49.34 31.7 QP 40.0 -8.3 1.25 V 279 17.90 13.80
2 97.95 34.1 QP 43.5 -9.4 1.00 V 84 25.10 9.00
3 142.67 26.6 QP 43.5 -16.9 2.00 V 243 13.10 13.50
4 249.60 27.7 QP 46.0 -18.3 1.00 V 251 14.50 13.20
5 327.38 35.1 QP 46.0 -10.9 1.00 V 211 19.30 15.80
6 500.42 32.2 QP 46.0 -13.8 2.00 V 73 12.10 20.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.

Report No.: RF130321C09 32 of 73 Report Format Version 5.1.0


4.2 6dB BANDWIDTH MEASUREMENT

4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT

The minimum of 6dB Bandwidth Measurement is 0.5 MHz.

4.2.2 TEST SETUP

EUT SPECTRUM

10dB ATTENUATION ANALYZER


PAD

4.2.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

4.2.4 TEST PROCEDURE

a. Set resolution bandwidth (RBW) = approximately 1% of the emission bandwidth


b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak.
c. Trace mode = max hold.
d. Sweep = auto couple.
e. Measure the maximum width of the emission that is constrained by the
frequencies associated with the two amplitude points (upper and lower) that are
attenuated by 6 dB relative to the maximum level measured in the fundamental
emission

4.2.5 DEVIATION FROM TEST STANDARD

No deviation.

4.2.6 EUT OPERATING CONDITIONS

The software provided by client to enable the EUT under transmission condition
continuously at lowest, middle and highest channel frequencies individually.

Report No.: RF130321C09 33 of 73 Report Format Version 5.1.0


4.2.7 TEST RESULTS

802.11b
6dB
FREQUENCY MINIMUM LIMIT
CHANNEL BANDWIDTH PASS / FAIL
(MHz) (MHz)
(MHz)

1 2412 12.08 0.5 PASS

6 2437 12.10 0.5 PASS

11 2462 12.10 0.5 PASS

802.11g
6dB
FREQUENCY MINIMUM LIMIT
CHANNEL BANDWIDTH PASS / FAIL
(MHz) (MHz)
(MHz)

1 2412 16.54 0.5 PASS

6 2437 16.53 0.5 PASS

11 2462 16.51 0.5 PASS

802.11n (20MHz)

6dB BANDWIDTH (MHz)


FREQUENCY MINIMUM
CHANNEL PASS / FAIL
(MHz) LIMIT (MHz)
CHAIN 0 CHAIN 1

1 2412 17.63 17.61 0.5 PASS

6 2437 17.65 17.63 0.5 PASS

11 2462 17.63 17.61 0.5 PASS

802.11n (40MHz)

6dB BANDWIDTH (MHz)


FREQUENCY MINIMUM
CHANNEL PASS / FAIL
(MHz) LIMIT (MHz)
CHAIN 0 CHAIN 1

3 2422 36.47 36.48 0.5 PASS

6 2437 36.52 36.50 0.5 PASS

9 2452 36.53 36.50 0.5 PASS

Report No.: RF130321C09 34 of 73 Report Format Version 5.1.0


4.3 CONDUCTED OUTPUT POWER

4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT

For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt
(30dBm)

Per KDB 662911 D01 Multiple Transmitter Output v01r02 Method of conducted
output power measurement on IEEE 802.11 devices,

Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4;


Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel
widths with NANT ≥ 5.

For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB.

4.3.2 TEST SETUP

EUT Power Sensor Power Meter


10dB ATTENUATION
PAD

4.3.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

4.3.4 TEST PROCEDURES

An average power sensor was used on the output port of the EUT. A power meter
was used to read the response of the average power sensor. Record the average
power level.

Report No.: RF130321C09 35 of 73 Report Format Version 5.1.0


4.3.5 DEVIATION FROM TEST STANDARD

No deviation.

4.3.6 EUT OPERATING CONDITIONS

Same as Item 4.2.6.

Report No.: RF130321C09 36 of 73 Report Format Version 5.1.0


4.3.7 TEST RESULTS

FOR AVERAGE POWER

802.11b
FREQUENCY AVERAGE POWER AVERAGE POWER
CHANNEL
(MHz) (mW) (dBm)
1 2412 4.395 6.43
6 2437 4.477 6.51
11 2462 4.227 6.26

802.11g
FREQUENCY AVERAGE POWER AVERAGE POWER
CHANNEL
(MHz) (mW) (dBm)
1 2412 4.667 6.69
6 2437 4.688 6.71
11 2462 4.560 6.59

802.11n (20MHz)

FREQUENCY AVG. POWER (dBm) TOTAL TOTAL


CHAN. (MHz) POWER POWER
CHAIN 0 CHAIN 1 (mW) (dBm)

1 2412 3.73 3.65 4.677 6.70

6 2437 3.90 3.42 4.653 6.68

11 2462 3.84 3.03 4.430 6.46

802.11n (40MHz)

FREQUENCY AVG. POWER (dBm) TOTAL TOTAL


CHAN. (MHz) POWER POWER
CHAIN 0 CHAIN 1 (mW) (dBm)

3 2422 3.46 3.20 4.307 6.34

6 2437 3.64 3.12 4.363 6.40

9 2452 3.51 3.02 4.248 6.28

Report No.: RF130321C09 37 of 73 Report Format Version 5.1.0


4.4 POWER SPECTRAL DENSITY MEASUREMENT

4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT

The Maximum of Power Spectral Density Measurement is 8dBm.

4.4.2 TEST SETUP

EUT SPECTRUM
10dB ATTENUATION ANALYZER
PAD

4.4.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

4.4.4 TEST PROCEDURE

a. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak.


b. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize.
c. Use the peak marker function to determine the maximum power level in any
100 kHz band segment within the fundamental EBW.

4.4.5 DEVIATION FROM TEST STANDARD

No deviation.

4.4.6 EUT OPERATING CONDITION

Same as Item 4.2.6

Report No.: RF130321C09 38 of 73 Report Format Version 5.1.0


4.4.7 TEST RESULTS

802.11b
Freq. PSD Limit PASS
Channel
(MHz) (dBm/3kHz) (dBm/3kHz) /FAIL
1 2412 -24.33 8 PASS
6 2437 -23.42 8 PASS
11 2462 -23.70 8 PASS

802.11g
Freq. PSD Limit PASS
Channel
(MHz) (dBm/3kHz) (dBm/3kHz) /FAIL
1 2412 -21.90 8 PASS
6 2437 -21.34 8 PASS
11 2462 -21.54 8 PASS

802.11n (20MHz)
TX Freq. PSD Total PSD Limit PASS
Channel 10 log (N=2) dB
chain (MHz) (dBm/3kHz) (dBm/3kHz) (dBm/3kHz) /FAIL

1 2412 -22.15 3.01 -19.14 7.99 PASS


0 6 2437 -23.09 3.01 -20.08 7.99 PASS
11 2462 -22.92 3.01 -19.91 7.99 PASS
1 2412 -22.66 3.01 -19.65 7.99 PASS
1 6 2437 -23.40 3.01 -20.39 7.99 PASS
11 2462 -23.48 3.01 -20.47 7.99 PASS

NOTE: Directional gain = 3dBi + 10log(2) = 6.01dBi > 6dBi, so the power density limit shall be
reduced to 8-(6.01-6) = 7.99dBm.

802.11n (40MHz)
TX Freq. PSD Total PSD Limit PASS
Channel 10 log (N=2) dB
chain (MHz) (dBm/3kHz) (dBm/3kHz) (dBm/3kHz) /FAIL

3 2422 -24.57 3.01 -21.56 7.99 PASS


0 6 2437 -25.50 3.01 -22.49 7.99 PASS
9 2452 -24.62 3.01 -21.61 7.99 PASS
3 2422 -24.50 3.01 -21.49 7.99 PASS
1 6 2437 -25.69 3.01 -22.68 7.99 PASS
9 2452 -26.45 3.01 -23.44 7.99 PASS

NOTE: Directional gain = 3dBi + 10log(2) = 6.01dBi > 6dBi, so the power density limit shall be
reduced to 8-(6.01-6) = 7.99dBm.

Report No.: RF130321C09 39 of 73 Report Format Version 5.1.0


4.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT

4.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT

Below -20dB of the highest emission level of operating band (in 100kHz
Resolution Bandwidth).

4.5.2 TEST SETUP

EUT SPECTRUM
10dB ATTENUATION ANALYZER
PAD

4.5.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

4.5.4 TEST PROCEDURE

MEASUREMENT PROCEDURE REF

1. Set the RBW = 100 kHz.


2. Set the VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep time = auto couple.
5. Trace mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum power level in any 100
kHz band segment within the fundamental EBW.

Report No.: RF130321C09 40 of 73 Report Format Version 5.1.0


MEASUREMENT PROCEDURE OOBE

1. Set RBW = 100 kHz.


2. Set VBW ≥ 300 kHz.
3. Set span to encompass the spectrum to be examined.
4. Detector = peak.
5. Trace Mode = max hold.
6. Sweep = auto couple.

4.5.5 DEVIATION FROM TEST STANDARD

No deviation.

4.5.6 EUT OPERATING CONDITION

Same as Item 4.2.6

4.5.7 TEST RESULTS

The conducted emission test is performed on each TX port of operating mode


without summing or adding 10log (N) since the limit is relative emission limit.

The spectrum plots are attached on the following pages. D1 line indicates the
highest level, and D2 line indicates the 20dB offset below D1. It shows compliance
with the requirement.

Report No.: RF130321C09 41 of 73 Report Format Version 5.1.0


802.11b
CH 1

CH 6

CH 11

Report No.: RF130321C09 42 of 73 Report Format Version 5.1.0


802.11g
CH 1

CH 6

CH 11

Report No.: RF130321C09 43 of 73 Report Format Version 5.1.0


802.11n (20MHz)
CHAIN 0
CH 1

CH 6

CH 11

Report No.: RF130321C09 44 of 73 Report Format Version 5.1.0


CHAIN 1
CH 1

CH 6

CH 11

Report No.: RF130321C09 45 of 73 Report Format Version 5.1.0


802.11n (40MHz)
CHAIN 0
CH 3

CH 6

CH 9

Report No.: RF130321C09 46 of 73 Report Format Version 5.1.0


CHAIN 1
CH 3

CH 6

CH 9

Report No.: RF130321C09 47 of 73 Report Format Version 5.1.0


5. TEST TYPES AND RESULTS (FOR 5.0GHz BAND)

5.1 RADIATED EMISSION MEASUREMENT

5.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT

Radiated emissions which fall in the restricted bands must comply with the
radiated emission limits specified as below table. Other emissions shall be at
least 20dB below the highest level of the desired power:

FREQUENCIES FIELD STRENGTH MEASUREMENT DISTANCE


(MHz) (microvolts/meter) (meters)

0.009 ~ 0.490 2400/F(kHz) 300


0.490 ~ 1.705 24000/F(kHz) 30
1.705 ~ 30.0 30 30
30 ~ 88 100 3
88 ~ 216 150 3
216 ~ 960 200 3
Above 960 500 3
NOTE:
1. The lower limit shall apply at the transition frequencies.
2. Emission level (dBuV/m) = 20 log Emission level (uV/m).
3. For frequencies above 1000MHz, the field strength limits are based on average detector,
however, the peak field strength of any emission shall not exceed the maximum permitted
average limits, specified above by more than 20dB under any condition of modulation.

Report No.: RF130321C09 48 of 73 Report Format Version 5.1.0


5.1.2 TEST INSTRUMENTS

Same as item 4.1.2.

5.1.3 TEST PROCEDURES

Same as item 4.1.3.

5.1.4 DEVIATION FROM TEST STANDARD

No deviation.

5.1.5 TEST SETUP

Same as item 4.1.5.

5.1.6 EUT OPERATING CONDITIONS

Same as item 4.1.6.

Report No.: RF130321C09 49 of 73 Report Format Version 5.1.0


5.1.7 TEST RESULTS
ABOVE 1GHz DATA：

802.11a
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 149 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 57.5 PK 74.0 -16.5 1.00 H 72 18.80 38.70
2 5725.00 46.9 AV 54.0 -7.1 1.00 H 72 8.20 38.70
3 *5745.00 83.5 PK 1.00 H 72 44.80 38.70
4 *5745.00 72.9 AV 1.00 H 72 34.20 38.70
5 11490.00 59.1 PK 74.0 -14.9 1.03 H 43 9.60 49.50
6 11490.00 44.0 AV 54.0 -10.0 1.03 H 43 -5.50 49.50
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 57.1 PK 74.0 -16.9 1.52 V 248 18.40 38.70
2 5725.00 46.7 AV 54.0 -7.3 1.52 V 248 8.00 38.70
3 *5745.00 83.1 PK 1.52 V 248 44.40 38.70
4 *5745.00 72.7 AV 1.52 V 248 34.00 38.70
5 11490.00 59.0 PK 74.0 -15.0 1.25 V 126 9.50 49.50
6 11490.00 43.8 AV 54.0 -10.2 1.25 V 126 -5.70 49.50
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 50 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 157 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5785.00 84.0 PK 1.00 H 85 45.20 38.80
2 *5785.00 73.6 AV 1.00 H 85 34.80 38.80
3 11570.00 59.0 PK 74.0 -15.0 1.08 H 28 9.60 49.40
4 11570.00 44.0 AV 54.0 -10.0 1.08 H 28 -5.40 49.40
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5785.00 83.8 PK 1.55 V 238 45.00 38.80
2 *5785.00 73.0 AV 1.55 V 238 34.20 38.80
3 11570.00 58.9 PK 74.0 -15.1 1.16 V 130 9.50 49.40
4 11570.00 43.9 AV 54.0 -10.1 1.16 V 130 -5.50 49.40
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 51 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 165 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5825.00 84.2 PK 1.00 H 59 45.30 38.90
2 *5825.00 74.1 AV 1.00 H 59 35.20 38.90
3 5850.00 59.2 PK 74.0 -14.8 1.00 H 59 20.30 38.90
4 5850.00 49.1 AV 54.0 -4.9 1.00 H 59 10.20 38.90
5 11650.00 59.2 PK 74.0 -14.8 1.10 H 54 9.90 49.30
6 11650.00 44.3 AV 54.0 -9.7 1.10 H 54 -5.00 49.30
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5825.00 84.1 PK 1.50 V 250 45.20 38.90
2 *5825.00 74.2 AV 1.50 V 250 35.30 38.90
3 5850.00 59.1 PK 74.0 -14.9 1.50 V 250 20.20 38.90
4 5850.00 49.2 AV 54.0 -4.8 1.50 V 250 10.30 38.90
5 11650.00 59.6 PK 74.0 -14.4 1.26 V 158 10.30 49.30
6 11650.00 44.6 AV 54.0 -9.4 1.26 V 158 -4.70 49.30
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.
7. "#":The radiated frequency is out the restricted band.

Report No.: RF130321C09 52 of 73 Report Format Version 5.1.0


802.11n (20MHz)
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 149 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 68%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 47.6 PK 74.0 -26.4 1.07 H 2 8.90 38.70
2 5725.00 36.6 AV 54.0 -17.4 1.07 H 2 -2.10 38.70
3 *5745.00 85.3 PK 1.07 H 1 46.60 38.70
4 *5745.00 75.6 AV 1.07 H 1 36.90 38.70
5 11490.00 58.4 PK 74.0 -15.6 1.34 H 89 8.90 49.50
6 11490.00 48.4 AV 54.0 -5.6 1.34 H 89 -1.10 49.50
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 46.8 PK 74.0 -27.2 1.12 V 338 8.10 38.70
2 5725.00 36.0 AV 54.0 -18.0 1.12 V 338 -2.70 38.70
3 *5745.00 83.4 PK 1.12 V 338 44.70 38.70
4 *5745.00 73.8 AV 1.12 V 338 35.10 38.70
5 11490.00 57.6 PK 74.0 -16.4 1.05 V 171 8.10 49.50
6 11490.00 46.7 AV 54.0 -7.3 1.05 V 171 -2.80 49.50
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 53 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 157 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 68%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5785.00 85.6 PK 1.05 H 18 46.80 38.80
2 *5785.00 75.9 AV 1.05 H 18 37.10 38.80
3 11570.00 57.8 PK 74.0 -16.2 1.29 H 92 8.40 49.40
4 11570.00 47.8 AV 54.0 -6.2 1.29 H 92 -1.60 49.40
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5785.00 83.8 PK 1.09 V 327 45.00 38.80
2 *5785.00 74.1 AV 1.09 V 327 35.30 38.80
3 11570.00 57.2 PK 74.0 -16.8 1.09 V 164 7.80 49.40
4 11570.00 46.4 AV 54.0 -7.6 1.09 V 164 -3.00 49.40
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 54 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 165 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 68%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5825.00 85.8 PK 1.12 H 24 46.90 38.90
2 *5825.00 75.9 AV 1.12 H 24 37.00 38.90
3 5850.00 47.4 PK 74.0 -26.6 1.12 H 24 8.50 38.90
4 5850.00 36.2 AV 54.0 -17.8 1.12 H 24 -2.70 38.90
5 11650.00 57.8 PK 74.0 -16.2 1.29 H 92 8.50 49.30
6 11650.00 47.6 AV 54.0 -6.4 1.29 H 92 -1.70 49.30
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5825.00 83.8 PK 1.09 V 347 44.90 38.90
2 *5825.00 74.1 AV 1.09 V 347 35.20 38.90
3 5850.00 46.4 PK 74.0 -27.6 1.09 V 347 7.50 38.90
4 5850.00 36.2 AV 54.0 -17.8 1.09 V 347 -2.70 38.90
5 11650.00 57.9 PK 74.0 -16.1 1.04 V 158 8.60 49.30
6 11650.00 46.2 AV 54.0 -7.8 1.04 V 158 -3.10 49.30
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 55 of 73 Report Format Version 5.1.0


802.11n (40MHz)
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 151 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 68%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 47.5 PK 74.0 -26.5 1.38 H 57 8.80 38.70
2 5725.00 38.0 AV 54.0 -16.0 1.38 H 57 -0.70 38.70
3 *5755.00 82.0 PK 1.38 H 57 43.30 38.70
4 *5755.00 72.5 AV 1.38 H 57 33.80 38.70
5 11510.00 55.8 PK 74.0 -18.2 1.25 H 89 6.30 49.50
6 11510.00 45.8 AV 54.0 -8.2 1.25 H 89 -3.70 49.50
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 5725.00 42.9 PK 74.0 -31.1 1.14 V 345 4.20 38.70
2 5725.00 33.5 AV 54.0 -20.5 1.14 V 345 -5.20 38.70
3 *5755.00 79.1 PK 1.14 V 345 40.40 38.70
4 *5755.00 69.7 AV 1.14 V 345 31.00 38.70
5 11510.00 55.8 PK 74.0 -18.2 1.08 V 162 6.30 49.50
6 11510.00 45.2 AV 54.0 -8.8 1.08 V 162 -4.30 49.50
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 56 of 73 Report Format Version 5.1.0


EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 159 FREQUENCY RANGE 1 ~ 40GHz

INPUT POWER DETECTOR Peak (PK)


120Vac, 60 Hz
(SYSTEM) FUNCTION Average (AV)
ENVIRONMENTAL
25deg. C, 68%RH TESTED BY Sun Lin
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5795.00 83.2 PK 1.07 H 2 44.40 38.80
2 *5795.00 73.7 AV 1.07 H 2 34.90 38.80
3 5850.00 48.2 PK 74.0 -25.8 1.07 H 2 9.30 38.90
4 5850.00 38.7 AV 54.0 -15.3 1.07 H 2 -0.20 38.90
5 11590.00 56.0 PK 74.0 -18.0 1.21 H 108 6.60 49.40
6 11590.00 45.8 AV 54.0 -8.2 1.21 H 108 -3.60 49.40
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 *5795.00 80.2 PK 1.24 V 356 41.40 38.80
2 *5795.00 71.0 AV 1.24 V 356 32.20 38.80
3 5850.00 44.1 PK 74.0 -29.9 1.24 V 356 5.20 38.90
4 5850.00 34.9 AV 54.0 -19.1 1.24 V 356 -4.00 38.90
5 11590.00 56.8 PK 74.0 -17.2 1.16 V 169 7.40 49.40
6 11590.00 46.2 AV 54.0 -7.8 1.16 V 169 -3.20 49.40
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
5. “ * “: Fundamental frequency.
6. The limit value is defined as per 15.247.

Report No.: RF130321C09 57 of 73 Report Format Version 5.1.0


BELOW 1GHz WORST-CASE DATA：802.11n (20MHz)
EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 149 FREQUENCY RANGE Below 1000MHz

INPUT POWER DETECTOR


120Vac, 60 Hz Quasi-Peak
(SYSTEM) FUNCTION
ENVIRONMENTAL
25deg. C, 65%RH TESTED BY Brad Tung
CONDITIONS

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M


EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 57.12 26.5 QP 40.0 -13.5 1.50 H 61 12.90 13.60
2 109.62 26.4 QP 43.5 -17.1 2.00 H 55 16.00 10.40
3 175.72 25.8 QP 43.5 -17.7 2.00 H 95 12.80 13.00
4 249.60 22.7 QP 46.0 -23.3 1.00 H 195 9.50 13.20
5 350.71 23.6 QP 46.0 -22.4 1.25 H 250 7.30 16.30
6 420.70 22.9 QP 46.0 -23.1 1.00 H 250 4.80 18.10
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
EMISSION TABLE CORRECTION
LIMIT ANTENNA RAW VALUE
NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR
(dBuV/m) HEIGHT (m) (dBuV)
(dBuV/m) (Degree) (dB/m)
1 66.84 33.4 QP 40.0 -6.6 1.50 V 38 20.60 12.80
2 99.89 33.2 QP 43.5 -10.3 1.00 V 17 24.00 9.20
3 173.78 28.4 QP 43.5 -15.1 1.25 V 18 15.20 13.20
4 249.60 27.1 QP 46.0 -18.9 2.00 V 238 13.90 13.20
5 302.10 23.9 QP 46.0 -22.1 1.00 V 352 8.70 15.20
6 500.42 31.8 QP 46.0 -14.2 1.00 V 75 11.70 20.10
REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.

Report No.: RF130321C09 58 of 73 Report Format Version 5.1.0


5.2 6dB BANDWIDTH MEASUREMENT

5.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT

The minimum of 6dB Bandwidth Measurement is 0.5MHz.

5.2.2 TEST SETUP

Same as item 4.2.2.

5.2.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

5.2.4 TEST PROCEDURE

Same as item 4.2.4.

5.2.5 DEVIATION FROM TEST STANDARD

No deviation.

5.2.6 EUT OPERATING CONDITIONS

Same as item 4.2.6.

Report No.: RF130321C09 59 of 73 Report Format Version 5.1.0


5.2.7 TEST RESULTS

802.11a
6dB
FREQUENCY MINIMUM LIMIT
CHANNEL BANDWIDTH PASS / FAIL
(MHz) (MHz)
(MHz)

149 5745 16.45 0.5 PASS

157 5785 16.52 0.5 PASS

165 5825 16.45 0.5 PASS

802.11n (20MHz)

6dB BANDWIDTH (MHz)


FREQUENCY MINIMUM
CHANNEL PASS / FAIL
(MHz) LIMIT (MHz)
CHAIN 0 CHAIN 1

149 5745 17.64 17.08 0.5 PASS

157 5785 17.46 17.63 0.5 PASS

165 5825 17.40 17.16 0.5 PASS

802.11n (40MHz)

6dB BANDWIDTH (MHz)


FREQUENCY MINIMUM
CHANNEL PASS / FAIL
(MHz) LIMIT (MHz)
CHAIN 0 CHAIN 1

151 5755 36.47 36.43 0.5 PASS

159 5795 36.52 36.48 0.5 PASS

Report No.: RF130321C09 60 of 73 Report Format Version 5.1.0


5.3 CONDUCTED OUTPUT POWER

5.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT

For systems using digital modulation in the 5725 –5850 MHz bands: 1 Watt
(30dBm)

Per KDB 662911 D01 Multiple Transmitter Output v01r02 Method of conducted
output power measurement on IEEE 802.11 devices,

Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4;


Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel
widths with NANT ≥ 5.

For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB.

5.3.2 TEST SETUP

Same as Item 4.3.2.

5.3.3 INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

5.3.4 TEST PROCEDURES

Same as Item 4.3.4.

5.3.5 DEVIATION FROM TEST STANDARD

No deviation.

5.3.6 EUT OPERATING CONDITIONS

Same as Item 4.2.6.

Report No.: RF130321C09 61 of 73 Report Format Version 5.1.0


5.3.7 TEST RESULTS

FOR AVERAGE POWER

802.11a
FREQUENCY AVERAGE POWER AVERAGE POWER
CHANNEL
(MHz) (mW) (dBm)
149 5745 1.702 2.31
157 5785 1.746 2.42
165 5825 1.734 2.39

802.11n (20MHz)

AVG. POWER (dBm) TOTAL TOTAL


FREQUENCY
CHANNEL POWER POWER
(MHz)
CHAIN 0 CHAIN 1 (mW) (dBm)

149 5745 -0.79 -0.63 1.699 2.30

157 5785 -0.52 -0.68 1.742 2.41

165 5825 -0.58 -0.79 1.709 2.33

802.11n (40MHz)

AVG. POWER (dBm) TOTAL TOTAL


FREQUENCY
CHANNEL POWER POWER
(MHz)
CHAIN 0 CHAIN 1 (mW) (dBm)

151 5755 -0.73 -0.52 1.732 2.39

159 5795 -0.56 -0.64 1.742 2.41

Report No.: RF130321C09 62 of 73 Report Format Version 5.1.0


5.4 POWER SPECTRAL DENSITY MEASUREMENT

5.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT

The Maximum of Power Spectral Density Measurement is 8dBm.

5.4.2 TEST SETUP

Same as item 4.4.2.

5.4.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

5.4.4 TEST PROCEDURE.

Same as item 4.4.4.

5.4.5 DEVIATION FROM TEST STANDARD

No deviation.

5.4.6 EUT OPERATING CONDITION

Same as item 4.2.6.

Report No.: RF130321C09 63 of 73 Report Format Version 5.1.0


5.4.7 TEST RESULTS

802.11a
Freq. PSD Limit PASS
Channel
(MHz) (dBm/3kHz) (dBm/3kHz) /FAIL
149 5745 -26.69 8 PASS
157 5785 -26.40 8 PASS
165 5825 -27.16 8 PASS

802.11n (20MHz)
TX Freq. PSD Total PSD Limit PASS
Channel 10 log (N=2) dB
chain (MHz) (dBm/3kHz) (dBm/3kHz) (dBm/3kHz) /FAIL

149 5745 -25.83 3.01 -22.82 5.49 PASS

0 157 5785 -26.35 3.01 -23.34 5.49 PASS

165 5825 -27.35 3.01 -24.34 5.49 PASS

149 5745 -23.17 3.01 -20.16 5.49 PASS

1 157 5785 -25.38 3.01 -22.37 5.49 PASS

165 5825 -25.33 3.01 -22.32 5.49 PASS

NOTE: Directional gain = 5.5dBi + 10log(2) = 8.51dBi > 6dBi , so the power density limit shall be
reduced to 8-(8.51-6) = 5.49dBm.

802.11n (40MHz)
TX Freq. PSD Total PSD Limit PASS
Channel 10 log (N=2) dB
chain (MHz) (dBm/3kHz) (dBm/3kHz) (dBm/3kHz) /FAIL

151 5755 -29.43 3.01 -26.42 5.49 PASS


0
159 5795 -29.63 3.01 -26.62 5.49 PASS

151 5755 -24.61 3.01 -21.60 5.49 PASS


1
159 5795 -25.51 3.01 -22.50 5.49 PASS

NOTE: Directional gain = 5.5dBi + 10log(2) = 8.51dBi > 6dBi , so the power density limit shall be
reduced to 8-(8.51-6) = 5.49dBm.

Report No.: RF130321C09 64 of 73 Report Format Version 5.1.0


5.5 CONDUCTED OUT OF BAND EMISSION MEASUREMENT

5.5.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT

Below –20dB of the highest emission level of operating band (in 100kHz
Resolution Bandwidth).

5.5.2 TEST SETUP

Same as Item 4.5.2

5.5.3 TEST INSTRUMENTS

Refer to section 4.1.2 to get information of above instrument.

5.5.4 TEST PROCEDURE

Same as Item 4.5.4

5.5.5 DEVIATION FROM TEST STANDARD

No deviation.

5.5.6 EUT OPERATING CONDITION

Same as Item 4.3.6

5.5.7 TEST RESULTS

The conducted emission test is performed on each TX port of operating mode


without summing or adding 10log (N) since the limit is relative emission limit.

The spectrum plots are attached on the following pages. D1 line indicates the
highest level, and D2 line indicates the 20dB offset below D1. It shows compliance
with the requirement.

Report No.: RF130321C09 65 of 73 Report Format Version 5.1.0


802.11a
CH 149

CH 157

CH 165

Report No.: RF130321C09 66 of 73 Report Format Version 5.1.0


802.11n(20MHz)
CHAIN 0
CH 149

CH 157

CH 165

Report No.: RF130321C09 67 of 73 Report Format Version 5.1.0


CHAIN 1
CH 149

CH 157

CH 165

Report No.: RF130321C09 68 of 73 Report Format Version 5.1.0


802.11n (40MHz)
CHAIN 0
CH 151

CH 159

Report No.: RF130321C09 69 of 73 Report Format Version 5.1.0


CHAIN 1
CH 151

CH 159

Report No.: RF130321C09 70 of 73 Report Format Version 5.1.0


6. PHOTOGRAPHS OF THE TEST CONFIGURATION

Please refer to the attached file (Test Setup Photo).

Report No.: RF130321C09 71 of 73 Report Format Version 5.1.0


7. INFORMATION ON THE TESTING LABORATORIES

We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch,
were founded in 1988 to provide our best service in EMC, Radio, Telecom and
Safety consultation. Our laboratories are accredited and approved according to
ISO/IEC 17025.

If you have any comments, please feel free to contact us at the following:

Linko EMC/RF Lab Hsin Chu EMC/RF Lab


Tel: 886-2-26052180 Tel: 886-3-5935343
Fax: 886-2-26051924 Fax: 886-3-5935342

Hwa Ya EMC/RF/Safety/Telecom Lab


Tel: 886-3-3183232
Fax: 886-3-3270892

Email: [email protected]
Web Site: www.bureauveritas-adt.com

The address and road map of all our labs can be found in our web site also.

Report No.: RF130321C09 72 of 73 Report Format Version 5.1.0


8. APPENDIX A – MODIFICATIONS RECORDERS FOR
ENGINEERING CHANGES TO THE EUT BY THE LAB

No modifications were made to the EUT by the lab during the test.

---END---

Report No.: RF130321C09 73 of 73 Report Format Version 5.1.0

You might also like