Product Data Sheet

PARALOID™ B-64 Solid Grade Thermoplastic Acrylic

Resin
For Outstanding Hardness, Flexibility, and Adhesion to Various Substrates

Introduction PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin provides an outstanding
combination of hardness, flexibility, and adhesion to various substrates. This general-
purpose resin permits a wide latitude in formulating in solvents that are suitable for specific
applications. It has superior exterior durability, greater flexibility and film toughness than
PARALOID™ B-66 Thermoplastic Solution Resin. The hardness of PARALOID™ B-64 Solid
Grade Thermoplastic Acrylic Resin is similar to that of PARALOID™ B-66 Thermoplastic
Solution Resin and slightly softer than that of PARALOID™ A-11 Solid Grade Thermoplastic
Acrylic Resin.

PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin can be dissolved in Toluene,
Xylene, selected esters, Acetone, and Methyl Ethyl Ketone. PARALOID™ B-64 Solid Grade
Thermoplastic Acrylic Resin is not soluble in most alcohols and aliphatic hydrocarbons as
the sole solvent. Please contact your sales person for additional information about the
solvent compatibility of PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin. It is
well suited for a variety of applications, including treated metal, treated aluminum, concrete
floors, and certain plastics.

PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin is particularly suited for clear
coating of interior and exterior concrete floors and driveways. Unlike conventional curing
membranes which are regarded as temporary coatings, clear coats of PARALOID™ B-64
Solid Grade Thermoplastic Acrylic Resin exhibit excellent wear characteristics, moderate
gasoline and oil resistance, and very good hot tire resistance. The coating is normally
applied as a 15–20% solution in solvents such as Xylene or Butyl acetate.

Typical Physical Properties1

Property Typical Values

Physical Form Powder
Chemical Composition MMA/EA
Tg, °C 60
Molecular Weight, Wt. Avg. 140,000
Density, lbs/gal, (25°C) 9.4
Solubility Parameter 9.3
Ultimate Hardness of Clear Films, KHN 15–16

1. These properties are typical but do not constitute specifications.

®TM Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

Page 1 of 3 PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin Form No. 884-01231-0719
Safe Handling The Dow Chemical Company Material Safety Data Sheets (MSDS) contain pertinent
Information information that you may need to protect your employees and customers against any known
health or safety hazards associated with our products.

Under the OSHA Hazard Communication Standard, workers must have access to and
understand MSDS on all hazardous substances to which they are exposed. Thus, it is
important that you provide appropriate training and information to your employees and make
sure they have available to them MSDS on any hazardous products in their workplace.

The Dow Chemical Company sends MSDS on all of its products, whether or not they are
considered OSHA hazardous, to the "bill to" and/or "ship to" locations of all our customers
upon initial shipment (including samples). If you do not have access to one of these MSDS,
please contact your local Dow representative for a copy. Updated MSDS are sent upon
revision to all customers of record. In addition, MSDS are sent annually on all products
deemed hazardous under the Superfund Amendments and Reauthorization Act. MSDS
should be obtained from your suppliers of other materials recommended in this bulletin.

The Dow Chemical Company is a member of the American Chemistry Council and is
committed to ACC’s Responsible Care Program.

Handling Before using this product, consult the Material Safety Data Sheet (MSDS)/Safety Data
Precautions Sheet (SDS) for details on product hazards, recommended handling precautions and
product storage.

CAUTION! Keep combustible and/or flammable products and their vapors away from heat,
sparks, flames and other sources of ignition including static discharge. Processing or
operating at temperatures near or above product flashpoint may pose a fire hazard. Use
appropriate grounding and bonding techniques to manage static discharge hazards.

CAUTION! Failure to maintain proper volume level when using immersion heaters can
expose tank and solution to excessive heat resulting in a possible combustion hazard,
particularly when plastic tanks are used.

Storage Store products in tightly closed original containers at temperatures recommended on the
product label.

Disposal Dispose in accordance with all local, state (provincial) and federal regulations. Empty
Considerations containers may contain hazardous residues. This material and its container must be
disposed in a safe and legal manner.

It is the user's responsibility to verify that treatment and disposal procedures comply with
local, state (provincial) and federal regulations. Contact your Dow Technical Representative
for more information.

Product Dow has a fundamental concern for all who make, distribute, and use its products, and for
Stewardship the environment in which we live. This concern is the basis for our product stewardship
philosophy by which we assess the safety, health, and environmental information on our
products and then take appropriate steps to protect employee and public health and our
environment. The success of our product stewardship program rests with each and every
individual involved with Dow products − from the initial concept and research, to
manufacture, use, sale, disposal, and recycle of each product.

®TM Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

Page 2 of 3 PARALOID™ B-64 Solid Grade Thermoplastic Acrylic Resin Form No. 884-01231-0719
Customer Notice Dow strongly encourages its customers to review both their manufacturing processes and
their applications of Dow products from the standpoint of human health and environmental
quality to ensure that Dow products are not used in ways for which they are not intended or
tested. Dow personnel are available to answer your questions and to provide reasonable
technical support. Dow product literature, including safety data sheets, should be consulted
prior to use of Dow products. Current safety data sheets are available from Dow.

Contact: Notice: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and
North America: 1-800-447-4369 applicable laws may differ from one location to another and may change with time, Customer is responsible for determining
Latin America: (+55)-11-5188-9000 whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's
Europe: (+800)-3-694-6367 workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown
Asia-Pacific: (+800)-7776-7776 in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made
www.dow.com may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document.
References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless otherwise expressly
noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Page 3 of 3 ® Trademark of The Dow Chemical Company Form No. 884-01231-0719