MKN-No.

:
Product data sheet – Gas lava stone grill Argentina 2 1261602

Cooking appliance according to DIN 18852 for

application in the commercial preparation of food
in the general catering industry, front cooking, free
flow systems and snack bars. For cooking with
contact heat, for frying of quick-fried pieces and
for grilling meat and vegetables.

Technical highlights
Material: Bendings:
Casing and cover are made completely of CNS (material No. Cover bent downwards 30 mm at the front and bent upwards 20
1.4301) / AISI 304. mm at the rear. Designed as a drip edge at the front. 50 mm
Visible surfaces with polished and satin finish, 320 grit. cover projection closed to the appliance body.

Body: Control panel:

Buckling resistant, self-supporting, closed construction with side Operation panel desk-shaped for highest ergonomic
walls, rear wall and bottom. requirements and very easy cleaning. Removable from the front
for easy and cost efficient service access.
Ergonomiacally shaped knobs for a easy identification of the
position.

Effective area: Installation:

CNS/stainless steel grid with V-formed grid bars to drain off the Equipped for installation of a 580 mm high Counter SL lower
dripping liquids into the collecting pan at the front. Grid in 2 parts section with removable appliance feet (150 mm high) which are
and adjustable in height. Two adjustable heating zones. Heat adjustable in height.
distribution by means of the hot glowing stones below.

Type of energy: Special feature:

Appliance is completely tubed internally in accordance with gas
requirements. Gas connection by means of a gas appliance tube
attached to a gas socket (DN 15) with shut-off valve.

Heating:
Heating by atmospheric linear burners, thermoelectrically protected. Piezo ignition for the ignition burners to start up the main burner.

Subject to change without notice!

12.12.2016
 MKN-No.:
Product data sheet – Gas lava stone grill Argentina 2 1261602

Cooking appliance for cooking with contact Current drawings you will find here:
heat, for frying of quick-fried pieces and for www.mkn.eu
grilling meat and vegetables. ► service & support
► spare parts database & download

Further features Technical data

● connection, sealing by means of patented connecting method – Dimensions (LxWxH*) (mm): 800 x 700 x 270
clamp bar is rounded (R 20) at the back for easier cleaning
Effective area: 2
● manual temperature regulation by a tapswitch for each heating
zone – inspection hole für ignition burner for each heating zone Dim.: effect. area (LxWxH) (mm): 320 x 510 x
Diameter (mm):
Nominal capacity (L):
Nominal fill quantity (L):
Connected load (electrical) (kW):
Voltage¹ (V):
Recommended fuses (A):
Frequency range (Hz): 50/60
Rated heat load (kW): 16,0
Standard gas pressure – natural gas² (mbar): 20
Standard gas pressure – liquid gas² (mbar): 50 (DE), 30 (EU)
Gas connection: DN 15 (1/2")
Heat-up time (Min.):
Vapour pressure (bar):
Refrigeration capacity (kW):
Net weight (kg): 87
Gross weight³ (kg): 97
Heat emission latent (W): 3200
Heat emission sensitive (W): 11520
Type of protection:

* Carcass height plus optional appliance feet with a height of 150 mm or 200 mm

Product safety

● CE mark

Installation requirements Option / accessories

● gas connection provided by customer
MKN-No.: Description:
201568 all-gas socket, 1/2", with gas tube, 1/2" x 800 mm

201517 spare lava stones, 1 set

Subject to change without notice! ¹ special voltages on request ² further types of gas on request
12.12.2016 ³ seaworthy packing on request