STM32L476G-EVAL

Evaluation board with STM32L476ZG MCU

Data brief

Features
 STM32L476ZGT6 microcontroller with
1-Mbyte Flash memory and 128-Kbyte RAM
 Four power supply options: power jack,
ST-LINK/V2-1 USB connector, USB OTG FS
connector, daughterboard
 Microcontroller supply voltage: 3.3 V or range
from 1.71 V to 3.6 V
 Two MEMS digital microphones
 Two jack outputs for stereo audio headphone
with independent content
 Slot for microSD™ card supporting SD, SDHC,
SDXC
 4-Gbyte microSD™ card bundled
 16-Mbit (1M x 16 bit) SRAM device
 128-Mbit (8M x 16 bit) NOR Flash memory
device
 256-Mbit Quad-SPI Flash memory device with
Double Transfer Rate (DTR) support
 RF-EEPROM with I²C bus
 EEPROM supporting 1 MHz I²C-bus
communication speed
1. Picture is not contractual.
 RS-232 port configurable for communication or
STM32L476ZGT6 flashing  NFC transceiver connector
 IrDA transceiver (only supported up to MB1144  Connector for ADC input and DAC output
C-01 version of the board, no more supported
from MB1144 C-02 version)  Power-metering demonstration with dual-
 USB OTG FS Micro-AB port channel, sigma-delta modulator
 CAN 2.0A/B-compliant port  PT100 thermal sensor with dual-channel,
 Joystick with four-way controller and selector sigma-delta modulator
 Reset and wake-up / tamper buttons  STM32L476ZGT6 current consumption
measurement circuit
 Touch-sensing button
 Access to comparator and operational amplifier
 Light-dependent resistor (LDR)
of STM32L476ZGT6
 Potentiometer
 Extension connector for motor-control module
 Coin battery cell for power backup
 JTAG/SWD, ETM trace debug support, user
 LCD glass module daughterboard (MB979)
interface through USB virtual COM port,
with 40x8-segment LCD driven directly by
embedded ST-LINK/V2-1 debug and flashing
STM32L476ZGT6
facility
 2.8-inch 320x240 dot-matrix color TFT LCD
 Extension connector for daughterboard
panel with resistive touchscreen
 Smartcard connector and SWP support

December 2016 DocID027343 Rev 3 1/4

For further information contact your local STMicroelectronics sales office. www.st.com
Description STM32L476G-EVAL

Description

The STM32L476G-EVAL evaluation board has been designed as a complete demonstration

and development platform for STMicroelectronics ARM® Cortex®-M4 core-based
STM32L476ZGT6 microcontroller with three I²C buses, three SPI interfaces, six USART
ports, CAN port, SWPMI, two SAI ports, 12-bit ADC, 12-bit DAC, LCD driver, internal
128-Kbyte SRAM and 1-Mbyte Flash memory, Quad-SPI port, touch-sensing capability,
USB OTG FS port, LCD controller, Flexible Memory Controller (FMC), JTAG debugging
support.
The full range of hardware features on the board helps user to evaluate all the peripherals
(USB OTG FS, USART, digital microphones, ADC and DAC, dot-matrix TFT LCD, LCD
glass module, IrDA (supported up to version MB1144 C-01 of the board), LDR, SRAM, NOR
Flash memory device, Quad-SPI Flash memory device, microSD™ card, sigma-delta
modulators, smartcard with SWP, CAN transceiver, I²C, EEPROM, RF-EEPROM) and
develop applications. Extension headers allow easy connection of a daughterboard or
wrapping board for a specific application.
An ST-LINK/V2-1 is integrated on the board, as embedded in-circuit debugger and
programmer for the STM32 MCU and the USB virtual COM port bridge.

System requirement

 Windows® OS (XP, 7 or 8) or Linux 64-bit or Mac OS® X

 USB Type-A to Type-B or Mini-B cable

Development toolchains

 ARM® Keil®: MDK-ARM™ (a)

 IAR™: EWARM(a)
 GCC-based IDEs (free AC6: SW4STM32, Atollic® TrueSTUDIO® (a) and others)

Demonstration software

Demonstration software is preloaded in the STM32L476G-EVAL Flash memory, for easy

demonstration of the device peripherals in stand-alone mode. For more information and to
download the latest available version, refer to the STM32L476ZGT6 demonstration software
available on the www.st.com website.

a. On Windows® only.

2/4 DocID027343 Rev 3

STM32L476G-EVAL Ordering Information

Ordering Information

To order the STM32L476G-EVAL board with the STM32L476ZGT6 MCU refer to the table
below.

Table 1. Order code

Order code Target STM32

STM32L476G-EVAL STM32L476ZGT6

Revision history

Table 2. Document revision history

Date Revision Changes

21-Jan-2015 1 Initial release.

23-Oct-2015 2 Updated Section : Features.
Updated: Features since IrDA transceiver is no more
16-Dec-2016 3
supported from board revision C-02.

DocID027343 Rev 3 3/4

4
 STM32L476G-EVAL

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2016 STMicroelectronics – All rights reserved

4/4 DocID027343 Rev 3