We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
Field Replacement Procedure COBHAM
Cobham SATCOM
Global Technical Service dep.
Date: 15-06-2017
Document Number: 95-134053-8
New Mi 3027x Exchange & ID string.
This document describes how to make a duplicate of a defective 3027x (same ISN & S/N).
Please be informed:
1. You are now able to change mobile type via an ID string
2. The printer kitis the same as you are using for the 3026x.
3. The ID string program and the label are still the same.
The ID string generator, itis only for our service partners having purchased the special label printer kit
from Thrane & Thrane AVS.
Procedure to duplicate a defective mi
4. You need to enter the S/N and ISN number from the defective unit, (can be found on the label
located next to the connector plug) into our automatic ID string generator on the Thrane &
Thrane A/S Extranet.
2. Enter in the PCB number from the new unit and press send. Please see below.
Eyam
- mini-C ID-String
Continued...
Fela oa ets ewan / ding bss Cobra SATCOM
Tas Toe Me Ona page:t of
TeesStarSpar n, rnd, USA
www.cobhiam.com/satcom3.The ID string generator will generate an ID string with the same details as the old defective unit
duplicate’ (same mobile type, ISN and S/N).
4.The ID string generated is unique for the new unit, and can not be downloaded into another unit. The
PCB number MUST match what you entered ~ please see below for details regarding the PCB
number:
Before you can generate the ID string needed you should check the PCB number in the new unit you
want to program. You can check the PCB number, by the command ver (remember the complete PCB
No. 16 characters A0-00077381-0190).
can0:/% ver
Build: tt3027_release_fcs-14
Build time: Feb 17 2011 21:59:30
CPU: 1.00
DSP: 1.00
AVR: 8.37
OMAP Bootloader: 1.00
AVR Bootloader: 0.12
GPS SW: 6.02 (36023)
GPS HW: 08040005
GPS ROM:
Hardware: AO-00077381-01:
cand: /$
ing the ID string & Label:
1D string:
The ID siring will be received in an E-mail as an attachment to the email address specified to be used
by the IDSTRING generator. You should enter the new ID string (from the txt. file) into the new unit by
means of HyperTerminal,
The ID string command is:
Id xxcocrorer00x 52 character)
Example:
id d261b0370f9e2654726a00940b726009880149102291496d/64c
Passwords:
ID string can be entered on NORMAL user level. From SW 1.06. the unit will also change the dist
password, so the SIN will always match the distb password,
‘That mean you can reset an unknown distb password with an ID string on normal user level
‘Sysadm password is stil sysadm after the ID string has been entered,
Continued,
Software:
Please make sure the unit is updated to the correct software version (depending on the type of mini-C.
and local approvals etc) before the system is re-installed on the vessel
Poge 2 of 3 ‘www.cobham.com/satcomLabel:
The other attachment in the E-mail (the Ibl. file) is the “label file”. When you double click at this file you
will print two labels out. Please put one of the labels on the unit as below, and please make sure the
label you put on is correct with the same SIN and ISN as you can see by the command sti:
can0:/$ status -i
Serial number: 11109302
Terminal type: Inmarsat-C Transceiver
Mobile number: 422000216
Mobile ype : TT-3027C SOLAS Maritime
ISN number : 4TT0S439246F
canoss
‘After having made a duplicate of the defective unit, you must send the faulty unit back for service
Here is the link to the automatic ID string generator:
https://sync.cobham.com/satcom/supportipin-codes-and-id-strings/mini-c-id-string!
Cobham SATCOM
Global Technical Service
bsirdathsiauien Page 3 of 3 www cobham.com/satcom
Revision: 8