65 mm

Contents 1. General Scan Tool Information ode. When more than one screen of data is retrieved, moves up through t- 2. Using Your Scan Tool 3. Tool Menu 3.1 Diagnosis Functions at identify the software version in the vehicle’s control module (s). -- When the monitor`s status is: 3.2 DTC Lookup 5. Guarantee Card
he current screen to the previous screens for additional data. The tool also displays In-Use Performance Tracking of important readine- OK - The vehicle's monitors have run and completed their diagnosis Hello ! Thank you for purchasing this product. In order to better serve you,
1. General Scan Tool Information 1.1 User Interface The Main Menu and Diagnostic Menu are broken down into the foll- 1) Read Codes: Looks up definitions of DTCs stored in scan tool, and shows the possible
6. Back Key - Cancel a selection (or action) from a menu or returns to the 2.1 Locating Data Link Connector owing menus: Reads DTCs from the vehicle's computer with KOEO or KOER.
ss monitors. and testing. causes of the DTC. (Not every DTC with possible causes reason) please read carefully , fill in and properly keep this Guarantee Card after pur-
1.1 User Interface The scan tool is designed for easy use. All menus and lists operate chasing the product.
-2- menu. lt is also used to exit DTC lookup screen. Choose a location (under driver side 6) I/M Readiness:
INC (Incomplete) - The vehicle's monitors have not yet run and com-
the same way. 2) Erase Codes:
1.2 Specifications dash, or under steering wheel) and Diagnosis pleted diagnosis and testing.
-3- 7. Left Scroll Key - Moves left through menu and submenu items in menu Delete DTCs from the vehicle's computer system’s memory. Display a snapshot of the state of the vehicle’s OBDII Monitors.
mode. When more than one screen of data is retrieved, moves left through use that description in both places. N/A (Not Applicable) - vehicle does not support that monitor.
+ Read Codes + Freeze Frame
2. Using Your Scan Tool NOTE: 3.3 Battery Name Email
1 the current screen to the previous screens for additional data. + Erase Codes 3) Live Data:
If unsure about location of DLC, check + Vehicle Info.
* To review I/M Readiness status, make sure that the ignition key is switc-
2.1 Locating Data Link Connector -4- 8. Right Scroll Key - Moves right through menu and submenu items in me- vehicle’s service manual or reputable + Live Data + I/M Readiness
The live Data menu allows you to view the recording and playback of real Display battery condition, Max value & Min value by graph in real ti-
time PID data from the electronic control module. hed to ON with the engine off. I/M Readiness me. Purchase Date Cotact Number
2.2 Connect The Tool -4- nu mode. When more than one screen of data is retrieved, moves right th- service center for the location - All Datastream + On-Board Monitoring * In live data menu, the selected items can be set-to-top by pressing and * Not all monitors are supported by all vehicles.
rough the current screen to the next screens for additional data. - Graph Display MIL On IGN SPARK
+ O2 Sensor Test Address Product Name
3. Tool Menu -5- holding the key for 3 seconds. -- There are two types of I/M Readiness tests: DTC PdDTC 2
2 9. One-key I/M Readiness - Quick checks emission readiness status and - Record + Component Test 2
3.1 Diagnosis Functions a. Since DTCs is Cleared (shows status of the monitors since the DTCs we-
-6- drive cycle verification. 3.4 Settings Order Number
93 mm

3 - Playback -- All Datastream: re last cleared.) MIS EVAP

3.2 DTC Lookup -9- 4 9 10. Enter Key - Confirms a selection (or action) from a menu. 2.2 Connect The Tool Views vehicle Parameter ldentification Data ( PIDs ) in real time. PIDs are b. This Drive Cycle (shows the status status of monitors since the start of the FUE AIP
DTC Lookup displayed in textual or graphic format when available. 1) Languages: Date Cause of failure and solution
11. Right Scroll Key - Moves right through menu and submenu items in m- current drive cycle.)
3.3 Battery -9- 5
1. Locate the OBDII Data Link Connector under the steering column. If the c- CCM O2S Allows the user to change the system language of the tool. Default langu-
enu mode. When more than one screen of data is retrieved, moves right onnector is not there, there should be a label indicating the whereabouts of Battery age is English.
through the current screen to the next screens for additional data.
-- Graph Display: -- Abbreviations Explanation of IM Readiness: CAT HTR
3.4 Settings -9- 6 10 the connector. Show the live data via graph mode. selecte PIDs by key, enter the g-
Repair
7 11 12. USB Interface - Connecting the USB to the computer, the removable di- Settings No.
Abbre-
Name No.
Abbre-
Name HCAT EGR 2) Unit: Records
4. Abbreviation Appendix of Live Data - 10 - 2. If necessary, remove the cover from the DLC. raph by key switch the PIDs by and key. viation viation Changes units of measurement to display Metric System and English System.
8 12 sk will be displayed. Simply copy and paste the upgrade file into the remo- + Languages
Malfunction Indicator Ignition Key
vable disk to complete the upgrade. 3. Turn the ignition switch to the ON position. Do not start the engine. - Português - Deutsch - English - Español - 繁體中文 -- Record: Lamp (MIL) Status 7) On-Board Monitoring: 3) Self-test:
13. Up + Down Keys - Screen capture function. (The device stores up to 10 - Français - Italiano - 日本語 - Pусский Record the PIDs frame, selecte PIDs by key, enter the record page Diagnostic Trouble Scan tool controls the operation of vehicle components, tests or systems.
4. Plug the OBDII connector into the Data Link Connector. Pending DTC -- Display Test (Used to check the displa y screen.)
pictures.) + Unit by key. Select the "Memory Slot”and start recording. Code -- Keyboard Test (Verifies that the keys are working correctly.)
1. OBDII Connector - Connects the scan tool to the vehicle’s Data Link Co- 5. The tool will attempt to identify the vehicle. If successful,it will display the - Metric - English Evaporative System 8) O2 Sensor Test: Warranty Statement
Misfire Monitoring Display oxygen sensor monitoring test results from the vehicle’s memory,
nnector (DLC). information about the recognized vehicle. If the vehicle cannot be recogni- + Data Logging -- Playback: Monitor
1.2 Specifications 4) System Info: If there is any quality problem of the product that needs to be repaired, ple-
zed,a menu will be shown for you to select the vehicle manually. Choose the record slot to playback the live data, switch frame by an- the O2 Monitor Test is not an ON-DEMAND Test.
+ Self-test Fuel System Monitor Air Conditioning Display the device hardware information, software information, release d- ase send this warranty card together with the purchased product back to our c-
2. LCD Display - Visual display of information to the user. 320 × 240 Pixel 1. Display: 320 x 240 pixel display with TFT color screen. Refrigerant Monitor
- Display Test - Keyboard Test d key. ate and serial number, etc. ompany to provide after-sales service.
display with TFT color screen. 6. Perform Quick Test: 9) Component Test:
2. Operating Temperature: -10°C to 40°C (14°F to 104°F). + System Info. Comprehensive Com- Oxygen Sensor
By using the , , , or keys to select to Diagnosis M- 4) Freeze Frame: ponents Monitor Monitor Tool will display a list of components and their locations on the vehicle. T-
3. One-key VIN - Display vehicle identification number. his function will always appear on the Main Menu. This selection will app-
3. Storage Temperature: -20°C to 70°C (-4°F to 158°F). enu by pressing key to ENTER. Display a snapshot of operating conditions at the time of an emission relat- Heated Catalyst
The Function is only in the main menu. Catalyst Monitor ear on the Diagnostic Menu only when the tool has a list of component loc-
ed fault. Monitor
4. One-key DTC - Looks up Pending Codes stored in the scan tool. 4. External Power: 9.0V to 16.0V power provided via vehicle battery. + Function is only in the secondary menu. ations for the currently selected vehicle.
5) Vehicle Info.: Heated Catalyst Exhaust Gas Recircu-
5. Product Size: 137 × 79 × 22 mm (5.4"×3.1"×0.9"). - Function is only in the three-level menu. Monitor lation System Monitor
5. UP Scroll Key - Moves up through menu and submenu items in menu m- Scan tool displays the vehicle’s VIN number, Calibration ID (s) and CVN th-
6. Net Weight: 0.19kg (0.42lb), GW: 0.23kg (0.51lb).
Version Number: A01 Version Number: A01
-1- -2- -3- -4- -5- -6- -7- -8- -9- - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -