TTS51 SPC-2667130-0102

SPC
Spare Parts Catalogue

Tetra Tray Shrink 51
674851-1800
Doc. No: SPC-2667130-0102

3
4
1
5
The position numbers in the illustration correspond with the chapter numbers listed on the next page.
Copyright © 2005 Tetra Pak Group
All rights reserved. No part of this document may be reproduced or copied in any form or by any
means without written permission from Tetra Pak Carton Ambient AB.
and all Tetra Pak products are trademarks belonging to the Tetra Pak Group.
The content of this manual is in accordance with the design and construction of the machine or
equipment at the time of publishing. Tetra Pak reserves the right to introduce design modifications
without prior notice.
This document was produced by: This Tetra Pak equipment was manufactured by:
Tetra Pak Carton Ambient AB Tetra Pak Carton Ambient AB

Ruben Rausings gata Ruben Rausings gata
SE22186 LUND SE22186 LUND
Sweden Sweden
Additional copies can be ordered from Tetra Pak Parts or the nearest Tetra Pak office. When ordering
additional copies, always provide the document number. This can be found in the machine
specification document. It is also printed on the front cover and in the footer on each page of the
manual.
Doc. No. SPC-2667130-0102
Issue 2005-03
This document is valid from: i Introduction
Series No/Machine No Sign. 1 Infeeder

B-674801-1200
2 Sealing Unit
SPC
B-674802-1300
3 Shrink Unit
B-674803-1200
Spare Parts Catalogue 4 Cabinet
B-675309-0100
Tetra Tray Shrink 51 5 Electric Equipment

B-679242-0500
674851-1800
6 Panel
B-675310-0100
7 Regular Accessories
B-674809-1100
8 Optional Equipment
B-674871-0600
9 Accessories
B-675308-0100
10 Optional Kit
B-675311-0100
ii Part Number Index
A list of all optional equipment, optional iii Electrical Parts Index

kits, and rebuilding kits that this
catalogue is valid for is found on the next
page.
Doc. No: SPC-2667130-0102
Issue 2005-03
Tetra Pak
Tetra Pak Carton Ambient AB
Valid for:
Cooling system
2703567-0100
Horizontal perforation
2636130-0100
Mist lubricator
90459-5052
Positioning device
722258-0700
Update Log for Doc. No. SPC-2667130-0102
This table shows all changes made to this catalogue, such as kits installed
and pages added or removed.
Date Installed Kit Added Pages Removed Pages Signature

(Doc. No.)
Date Installed Kit Added Pages Removed Pages Signature
(Doc. No.)
i Introduction
SPC Introduction i - 1 (90)

i Introduction
en About the Introduction Chapter

This chapter contains basic information about this catalogue and related Tetra Pak equipment.
cs Seznámení s úvodní kapitolou
Tato kapitola obsahuje základní informace o tomto katalogu a o příslušném zařízení Tetra Pak.
da Om indledningen
Kapitlet indeholder grundlæggende oplysninger om dette katalog og tilhørende Tetra Pak-udstyr.
de Zur Einleitung
Dieses Kapitel enthält grundlegende Informationen zu diesem Handbuch und der entsprechenden Tetra Pak
Ausrüstung.
el Σχετικά µε το Κεφάλαιο 'Εισαγωγή'
Αυτό το κεφάλαιο περιέχει βασικές πληροφορίες για τον παρόντα κατάλογο και τον σχετικό εξοπλισµό της
Tetra Pak.
es Sobre el Capítulo de Introducción
Este capítulo contiene información básica sobre este manual y el equipo Tetra Pak relacionado.
et Sissejuhatava peatüki kohta
Sellest peatükist leiate põhiinfo kataloogi ja Tetra Pak seadmete kohta.
fi Tietoja Johdanto-luvusta
Tässä luvussa on perustietoja tästä luettelosta ja Tetra Pak -laitteesta.
fr Concernant le chapitre d’Introduction
Le présent chapitre contient les renseignements de base concernant ce manuel et l’équipement Tetra Pak
concerné.
hu A Bevezetés fejezetről
Ezen fejezet alapvető információt tartalmaz jelen kézikönyvről és a kapcsolódó Tetra Pak berendezésről.
it Informazioni sulla sezione Introduzione
Questa sezione contiene informazioni generali sul presente catalogo e la relativa macchina Tetra Pak.
lt Apie pristatymo skyrių
Šiame skyriuje yra pagrindinė informacija apie šį katalogą ir su juo susijusią Tetra Pak įrangą.
lv Par Ievada nodaļu
Šī nodaļa satur galveno informāciju par katalogu un par Tetra Pak iekārtām, uz kurām tas attiecas.
mt Dwar il-Kapitlu ta’ l-Introduzzjoni
Dan il-kapitlu fih informazzjoni baüika dwar dan il-katalgu u tagömir relatat ta’ Tetra Pak.
nl Omtrent het hoofdstuk Inleiding
Dit hoofdstuk bevat basisinformatie betreffende dit handboek en daarmee verband houdende apparatuur van
Tetra Pak.
no Om kapitlet Introduksjon
Dette kapitlet inneholder grunnleggende informasjon om denne katalogen og relatert Tetra Pak-ustyr.
pl Informacje na temat Rozdziału Wprowadzającego
Rozdział ten zawiera podstawowe informacje na temat niniejszego katalogu i związanego z nim wyposażenia
Tetra Pak.
pt Sobre o capítulo Introdução
Este capítulo contém informações básicas sobre este catálogo e ao equipamento Tetra Pak relacionado.
sk O úvodnej kapitole
Táto kapitola obsahuje základné informácie o tomto katalógu a príslušnom zariadení Tetra Pak.
sl Informacija o uvodnem poglavju
Poglavje vsebuje osnovne informacije o tem katalogu in opremi Tetra Pak.
sv Om inledningskapitlet
Det här kapitlet innehåller grundläggande information om katalogen och Tetra Pak-utrustningen.
i - 2 (90) SPC Introduction

i Introduction Table of Contents
Introduction
Illustrations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
English Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 7
Úvod
Obrázky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Český text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 11
Indledning
Illustrationer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Dansk tekst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 15
Einleitung
Abbildungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Deutscher Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 19
Εισαγωγή
Εικόνες . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Ελληνικό Κείµενο . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 23
Introducción
Ilustraciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Texto español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 27
Sissejuhatus
Illustratsioonid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Eestikeelne tekst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 31
Johdanto
Kuvat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Suomenkielinen teksti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 35
Introduction
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Texte français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 39
Bevezetés
Ábrák . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Magyar szöveg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 43
Introduzione
Figure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i - 5
Testo in italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 47

i Introduction
Įvadas
Iliustracijos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Lietuviškas tekstas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 51
Ievads
Ilustrācijas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Latviešu teksts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 55
Introduzzjoni
Stampi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Test bil-Malti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 59
Inleiding
Illustraties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Nederlands tekst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 63
Introduksjon
Illustrasjoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Norsk tekst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 67
Wprowadzenie
Ilustracje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Tekst po polsku. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 71
Introdução
Ilustrações . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Texto em portugese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 75
Úvod
Zobrazenie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Slovenský text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 79
Uvod
Risbe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Slovensko besedilo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 83
Inledning
Bilder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 5
Svensk text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 87

i Introduction
Used in group:
Tetra Pak 648506-0400 Pos. 070 WATER PANEL Drawing file: 1095608-1_1_AH.hpgl 2-82 (107)
2 - 82(107)
210
220
150
070
150
120
080
150 160
2 3 4
060 130 B2102
150
410 040
080
150 410
1 070
200
270 180
S-1095710-3
(POS 130)
.
ECM: 139816 - 20030923 W2220 410

150
Group number: 1095608-0100 175
110 110
Assembly Drawing: 1095608-1_1_AH This list covers pages from
2402-82 to 2-89
410
Pos Part No UN Qty Description Page No Pos165 Part No UN Qty Description Page No
200
A3/FLEX COMPRESSOR (See drawing on page: 2-86) TBA/21 ICE-WATER (See drawing on page: 2-84)
165 342901-0102 1 HOSE NIPPLE, 270EXT.THR. R1/4-7 MM 180250 315239-0111 1 NYLON WASHER G3/8
175 90330-0085 1 BUSHING, INT/EXT. THR. 410
R1/2-RP1/4 235 342920-0124 1 STRAIGHT COUPLING,EXT.THREADED 8/6-R1/2"
150
180 315239-0111 3 NYLON WASHER G3/8 320 90166-0118 MM 900 TUBE 8 MM PA BLACK
410 W2243
260 342921-0115 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 330 1255364-0000 1 WATER DIAGRAM
330 2550944-0000
100 1 WATER DIAGRAM
360 90140-0023 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8
Y2108 TBA/22 COMPRESSOR (See drawing on page: 2-82)
050
030370 90187-0089 1 BALL VALVE G3/8, NPBR
170
165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM
380 342700-0111 1 NIPPLES,HEXAGON,EXT.G-THREAD G3/8"-G3/8"S-1095681 175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4
240 (POS 20)180
390 90163-0041 1 HOSE NIPPLE, EXT.THR. 3/8-12 MM 315239-0111 .
1 NYLON WASHER G3/8

400 90140-0020 1 ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8 330 1484511-0000 1 WATER DIAGRAM
A3/FLEX ICE-WATER (See drawing on page: 2-88) Common Parts

180 315239-0111 3 NYLON WASHER G3/8 030 1041932-0000 1 PIPE
235 342920-0124 110 1 STRAIGHT COUPLING,EXT.THREADED 8/6-R1/2" 040 1041933-0000 1 PIPE
S-1095838-2
260 342921-0115 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 050 1037583-0000 1 HOLDER
(POS 110)
320 90166-0118 MM 900 TUBE 8 MM PA BLACK 060 90458-0921 2 FILTER SP 122-200
.
150
330 2550945-0000 1 WATER DIAGRAM 90458-2541 1 FILTER, CP23174-7-304SS
1095608-1
360 90140-0023 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8 070 90187-0029 4 BALL VALVE G1/2, NPBR
370 90187-0089 1 BALL VALVE G3/8, NPBR 080 479261-0000 ECM 4 NIPPLE
380 342700-0111 1 NIPPLES,HEXAGON,EXT.G-THREAD G3/8"-G3/8" 090 312105-0370 2 SCREW M6S ISO 4017 M6X20 A480
390 90163-0041 1 HOSE NIPPLE, EXT.THR. 3/8-12 MM 100 315125-0153 2 WASHER TBRSB 6,4X22X4 A4
400 90140-0020 1 ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8 110 342720-0114 6 CONN. STR. GA-15-G1/2
120 90043-0006 1 PRESSURE GAUGE, 2041 D=63 MM
A3/SPEED COMPRESSOR (See drawing on page: 2-86) 130 342701-0202 1 BUSHING,INT./EXT.G-THREAD G3/8"-G1/8"
165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM 150 315239-0113 18 NYLON WASHER G1/2
175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4 160 315239-0109 1 NYLON WASHER G1/8
180 315239-0111 3 NYLON WASHER G3/8 170 342901-0105 1 HOSE NIPPLE, EXT.THR. R1/2-12 MM
260 342921-0115 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 200 90110-0095 1 CONNECTOR 3 POLE + EARTH
330 2552013-0000 1 WATER DIAGRAM 210 273455-0000 1 LABEL (COLD WATER)
360 90140-0023 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8 220 312502-0120 2 DRIVE SCREW ROUND HEAD KDS 0X5
370 90187-0089 1 BALL VALVE G3/8, NPBR 240 90157-0016 1 LOCKING FLUID
380 342700-0111 1 NIPPLES,HEXAGON,EXT.G-THREAD G3/8"-G3/8" 250 342930-0133 1 ELBOW 90 COUPL.,EXT.THREAD 10/8-R3/8"
390 90163-0041 1 HOSE NIPPLE, EXT.THR. 3/8-12 MM 270 352103-0101 2 CABLE GLAND, ST 9, PR15,2/PG9
400 90140-0020 1 ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8 350 2547061-0000 1 HOLDER
410 342708-0109 7 REINFORCING RING VSH 15X1 MM
TBA/21 COMPRESSOR (See drawing on page: 2-82) B 2102 90274-0042 1 PRESSURE GUARD, 200 KPA
165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM W 2220 351150-0403 MM 2000 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4 W 2243 351150-0403 MM 2000 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
5
180 315239-0111 1 NYLON WASHER G3/8 Y 2108 90042-0249 1 SOLENOID VALVE OFFICINE DI ENSINO
330 1511629-0000 1 WATER DIAGRAM
Machine Type Group Description Used-In Group Number Page No
Tetra Pak 648506-0400 WATER PANEL 648506-0400 Pos. 070 1095608-0100 2-83 (107)
Doc No: SPC-2645000-0101
7 6 A
8 9
g g y
10 Machine Sign Data

MACHINE SPECIFICATION
Machine No. : 21070 / 83816
11
Machine Type : TBA/22 - 200 B
Date of Issue : 10/23/2000
Drawing Spec. : 648571-0400
Machine Type : TBA/22 - 200 Baseline
Machine No. : 21070 / 83816
Issued by : Tetra Brik
Designed by : Tetra Brik Packaging Systems S.p.A. No. of Sheets : 1/1
12 Manufacturer
Via A. Delfini1
41100 Modena Italy
: Tetra Brik Packaging Systems S.p.A.
Via A. Delfini1
No of M. Dev. :1
41100 Modena Italy

Year of Manufacture : 2000
Basic Design Equipment Included

Machine Body B-648522 0400 1282762-0101 Trolley
Drive Unit B-648523 - 0500
Jaw System B-648524 - 0400
Final Folder B-648525 - 0400 527898-0101 Container H2O2
Service Unit B-648506 - 0300
Strip Applicator B-648507 - 0400
Regular Accessories B-648547 - 0100
Superstructure B-648521 - 0300
B Aut. Splicing Unit B-648513 - 0400
14 13 Electrical Cabinet BE-648538 - 0200
Variables Documentation Included

ECN No. EL 71390 SPC 81511-102 MM 82302-104
Frequency Hz - 50 MM 82302-604 OM 82346-104
OM 82346-604 IM 82358-103
Voltage 400/230
IM 82358-603 UM 82351-103
Machine Speed 20000/H UM 82351-603 UM 82197-102
TEM 27080-102 TEM 27085-602
EM 82318-104 EM 82318-604
2 Machine Body
SPC 3 Drive
4 Jaw System
5 Final Folder Module
TBA/22
648571-0400 6 Service Unit
7 Strip Applicator
8 Automatic Splicing Unit

D
15

i Introduction
17 18
Used in group:
Tetra Pak Pos. 020 SERVICE UNIT Drawing file: 648506-2_1_AD.hpgl 2-2 (107)
19
20
16
ECM: 140330 - 20030923
Group number: 648506-0400
Assembly Drawing: 648506-2_1_AD This list covers pages from 2-2 to 2-5
Pos Part No UN Qty Description Page No Pos Part No UN Qty Description Page No
A3/FLEX DIMC/FLEX (See drawing on page: 2-4)
090 2623714-0100 1 PEROXIDE REDUCER ................................................... 2-7
100 2623718-0100 1 PEROXIDE REDUCER ................................................... 2-9
Common Parts
010 1095610-0300 1 MAIN SWITCH .............................................................. 2-11
020 1095612-0300 1 COOLING WATER SYSTEM ............................... 2-13, 2-15
030 1095627-0300 1 FOAM CLEANING UNIT ............................................... 2-35
040 2613034-0100 1 MACHINE BODY ........................................................... 2-59
050 1095607-0200 1 COVERING PANEL ...................................................... 2-61
060 1095630-0200 1 CONNECTION BOX ............................................. 2-79, 2-81
070 1095608-0100 1 WATER PANEL ................................. 2-83, 2-85, 2-87, 2-89
080 1095714-0300 1 SUPPLY SYSTEM ........................................................ 2-91
Tetra Pak 648506-0400 SERVICE UNIT Pos. 020 648506-0400 2-3 (107)
Doc No: SPC-2645000-0101
E
22 23 25 26 27
21 Used in group:
Tetra Pak 648506-0400 Pos. 070 WATER PANEL Drawing file: 1095608-1_1_AH.hpgl 2-82 (107)
210
220
28
150
29
070
150
120
080
150 160
060 130 B2102
150
410 040
080
150 410
070 ECM: 139816 - 20030923

Group number: 1095608-0100 S-1095710-3
30
Assembly Drawing: 1095608-1_1_AH200 This list(POS
covers 130)
.
pages from 2-82 to 2-89
270
180
A3/FLEX COMPRESSOR (See W2220 4102-86)
drawing on page: TBA/21 ICE-WATER (See drawing on page: 2-84)
150
110 165 342901-0102 1
110 HOSE NIPPLE, EXT.THR. R1/4-7175
MM 180 315239-0111 1 NYLON WASHER G3/8
175 90330-0085 1 240
BUSHING, INT/EXT. THR. R1/2-RP1/4 235 342920-0124 1 STRAIGHT COUPLING,EXT.THREADED 8/6-R1/2"
410 180 315239-0111 3 NYLON WASHER G3/8 320 90166-0118 MM 900 TUBE 8 MM PA BLACK
165
260 342921-0115 200 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 330 1255364-0000 1 WATER DIAGRAM
330 2550944-0000 1 WATER DIAGRAM 250
270
360 90140-0023 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8 TBA/22 COMPRESSOR (See drawing on page: 2-82)
410
370 350 90187-0089 150 1 BALL VALVE G3/8, NPBR 165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM
410 380 342700-0111 W2243 1 NIPPLES,HEXAGON,EXT.G-THREAD G3/8"-G3/8" 175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4
090
390 90163-0041 1 HOSE NIPPLE, EXT.THR. 3/8-12 MM 180 315239-0111 1 NYLON WASHER G3/8
400 90140-0020
100 1 ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8 330 1484511-0000 1 WATER DIAGRAM
Y2108
050
030 A3/FLEX ICE-WATER (See drawing on page:
170 2-88) S-1095681 Common Parts
180 315239-0111 240 3 NYLON WASHER G3/8(POS 20) .
030 1041932-0000 1 PIPE
235 342920-0124 1 STRAIGHT COUPLING,EXT.THREADED 8/6-R1/2" 040 1041933-0000 1 PIPE
260 342921-0115
410 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 050 1037583-0000 1 HOLDER
320 90166-0118 MM 900 TUBE 8 MM PA BLACK 060 90458-0921 2 FILTER SP 122-200
330 2550945-0000 1 WATER DIAGRAM 90458-2541 1 FILTER, CP23174-7-304SS
360 90140-0023
110 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8 070 90187-0029 4 BALL VALVE G1/2, NPBR
370 90187-0089 1 BALLS-1095838-2
VALVE G3/8, NPBR 080 479261-0000 4 NIPPLE
34 380
390
400
342700-0111
90163-0041
150
90140-0020
1
1
1
NIPPLES,HEXAGON,EXT.G-THREAD
(POS 110).
HOSE NIPPLE, EXT.THR. 3/8-12 MM

G3/8"-G3/8"
ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8

090
100
110
1095608-1
120
312105-0370
315125-0153
342720-0114
90043-0006
2
2
6
1
SCREW M6S ISO 4017 M6X20 A480
WASHER TBRSB 6,4X22X4 A4
CONN. STR. GA-15-G1/2
PRESSURE GAUGE, 2041 D=63 MM
ECM 139813
A3/SPEED COMPRESSOR (See drawing on page: 2-86) 130 342701-0202 1 BUSHING,INT./EXT.G-THREAD G3/8"-G1/8"
165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM 150 315239-0113 18 NYLON WASHER G1/2
175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4 160 315239-0109 1 NYLON WASHER G1/8
180 315239-0111 3 NYLON WASHER G3/8 170 342901-0105 1 HOSE NIPPLE, EXT.THR. R1/2-12 MM
260 342921-0115 1 STRAIGHT COUPLING,EXT.THREADED 6/4-G3/8" 200 90110-0095 1 CONNECTOR 3 POLE + EARTH
330 2552013-0000 1 WATER DIAGRAM 210 273455-0000 1 LABEL (COLD WATER)
360 90140-0023 2 T-PIPE, INT. THREAD, NO. 2070-3/8-3/8 220 312502-0120 2 DRIVE SCREW ROUND HEAD KDS 0X5
370 90187-0089 1 BALL VALVE G3/8, NPBR 240 90157-0016 1 LOCKING FLUID
380 342700-0111 1 NIPPLES,HEXAGON,EXT.G-THREAD G3/8"-G3/8" 250 342930-0133 1 ELBOW 90 COUPL.,EXT.THREAD 10/8-R3/8"
390 90163-0041 1 HOSE NIPPLE, EXT.THR. 3/8-12 MM 270 352103-0101 2 CABLE GLAND, ST 9, PR15,2/PG9
400 90140-0020 1 ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8 350 2547061-0000 1 HOLDER
410 342708-0109 7 REINFORCING RING VSH 15X1 MM
TBA/21 COMPRESSOR (See drawing on page: 2-82) B 2102 90274-0042 1 PRESSURE GUARD, 200 KPA
165 342901-0102 1 HOSE NIPPLE, EXT.THR. R1/4-7 MM W 2220 351150-0403 MM 2000 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
33
175 90330-0085 1 BUSHING, INT/EXT. THR. R1/2-RP1/4 W 2243 351150-0403 MM 2000 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
180 315239-0111 1 NYLON WASHER G3/8 Y 2108 90042-0249 1 SOLENOID VALVE OFFICINE DI ENSINO
330 1511629-0000 1 WATER DIAGRAM
Tetra Pak 648506-0400 WATER PANEL 648506-0400 Pos. 070 1095608-0100 2-83 (107)
Doc No: SPC-2645000-0101
32 23 22 31 F

i Introduction Introduction
Introduction
Manual Information
Tetra Pak recommends reading all delivered manuals carefully. Make sure
that the delivered manuals are available to personnel who operate or
maintain the equipment.
It is important to keep this catalogue for the lifetime of the equipment and to
pass the catalogue on to any subsequent holder or user.
Tetra Pak will not be held responsible for any damage to the equipment
caused by not following the instructions given in the manuals that
accompany this equipment.
Delivered Manuals
The manuals delivered with this equipment may include
• Conversion Manual (CM)
This manual provides technicians with information on converting the
equipment between different production modes.
• Electrical Manual (EM)
This manual provides technicians with information about the
equipment’s electrical system.
• Installation Manual (IM)
This manual provides technicians with information required to safely
install the equipment.
• Maintenance Manual (MM)
This manual provides technicians with information on maintaining the
equipment.
• Operation Manual (OM)
This manual provides the operator with information on handling and
operating the equipment before, during, and after production.
• Spare Parts Catalogue (SPC)
This manual provides the information necessary to order spare parts
from Tetra Pak.
• Technical Manual (TeM)
– provides technicians with information required to safely install the
equipment
– provides technicians with information on maintaining the equipment
– provides technicians with information about the equipment’s
electrical system
– provides the information necessary to order spare parts from
Tetra Pak

Introduction i Introduction
Page Layout
Refer to the illustration (A) on page i-5: The main pages in a Spare Parts
Catalogue consist of an illustration page (1) and a corresponding list
page (7). The page number (5) is shown in the header of an illustration page
and in the footer of a list page. The document number (6) is shown in the
footer of a list page.
Page Numbering
Refer to the illustration (A) on page i-5: A page number (5) has three parts:
• chapter number (2)
• consecutive page number within the chapter (3)
• total number of pages in the chapter (4)
Machine Introduction
Manufacturer
For the manufacturer’s name and address, see the second page of this
catalogue.
Service
To order spare parts for this machine, or to report problems associated with
operating this machine, contact the nearest Tetra Pak office.
Contact the Liaison with other inquiries, comments, or suggestions for
improvement regarding the equipment and its documentation.
Identification
CE Classification
This equipment complies with the basic health and safety regulations of
the European Economic Area (EEA).

Machine Plate
The illustration (B) on page i-5 shows an example of a machine plate.
An illustration of the valid machine plate and its location on the equipment is
shown in the Introduction chapter of the manuals delivered with this
equipment. The machine plate contains the data listed below, needed when
contacting Tetra Pak concerning this specific equipment.
• Machine type (8)
• Volume (9)
• Drawing specifications (10)
• Machine serial number (11)
• Manufacturer (12)
• CE mark (13)
• Year of manufacture (14)
The illustration (C) on page i-5 shows an example of a machine

specification. Make sure that the equipment data listed in the front pages of
this manual corresponds to the machine plate data and the machine
specification.
How to Use This Spare Parts Catalogue

Locate a Spare Part Number
a) Refer to the illustration (D) on page i-5: Go to the chapter number (15)
indicated beside the main group that contains the part you want to locate.
Items b) and c) refer to the illustration (E) on page i-6.

b) On the main group illustration, look for the machine subgroup (17) that
contains the part or subgroup you are looking for. Note the position
number (18) and go to the list page that follows the illustration.
c) Look for the position number (16) or the subgroup name (19). Go to the
corresponding page number (20) listed in the right-hand column.
Items d) and e) refer to the illustration (F) on page i-6.
d) Locate the part (21) that you are looking for on the subgroup illustration
and note the part’s position number.
e) The part number (29) and part description (30) are listed beside the
position number on the list page.

Information Listed in a Spare Parts Catalogue

The list below refers to the illustration (F) on page i-6. A Spare Parts
Catalogue contains the following information about groups, subgroups, and
spare parts for the equipment:
• Group structure reference (22). Indicates the next higher group in the
equipment list structure.
• Group name (23)
• Unit of measure (25)
• Quantity (26)
• Assembly drawing number (27)
• List page range (28). Included if there are multiple pages in the group
illustration or list.
• Part or subgroup number (29)
• Subgroup name or part description (30)
• Group number (31)
• Equipment number (32)
• Group information heading (33). Indicates if the section below the
heading is for a specific machine variant or if it is a list of common parts.
If a list has more than one variant and each variant has its own assembly
drawing, a page reference to the variant’s assembly drawing is shown.
• Internal information (34)

i Introduction Úvod
Úvod
Informace o příručce
Společnost Tetra Pak doporučuje, abyste se důkladně seznámili se všemi
dodanými příručkami. Dodané příručky musí být k dispozici pracovníkům,
kteří provádějí obsluhu nebo údržbu zařízení.
Tento katalog je třeba uchovávat po celou dobu životnosti zařízení a předat
jej každému dalšímu vlastníkovi nebo uživateli.
Společnost Tetra Pak nezodpovídá za škody na zařízení způsobené
nedodržováním pokynů uvedených v příručkách dodaných se zařízením.
Dodané příručky
Mezi příručky dodané se zařízením patří:
• Příručka pro konverzi (CM)
Tato příručka obsahuje informace pro techniky o konverzi zařízení mezi
jednotlivými výrobními režimy.
• Příručka pro elektroinstalaci (EM)
Tato příručka obsahuje informace pro techniky o elektroinstalaci
zařízení.
• Příručka pro instalaci (IM)
Tato příručka obsahuje informace pro techniky týkající se bezpečné
instalace zařízení.
• Příručka pro obsluhu (MM)
Tato příručka obsahuje informace pro techniky o údržbě zařízení.
• Provozní příručka (OM)
Tato příručka obsahuje informace pro obsluhu o manipulaci a provozu
zařízení před, během a po výrobě.
• Katalog náhradních dílů (SPC)
Tato příručka obsahuje informace nezbytné pro objednávání náhradních
dílů od společnosti Tetra Pak.
• Technická příručka (TeM)
– obsahuje informace pro techniky týkající se bezpečné instalace
zařízení
– obsahuje informace pro techniky o údržbě zařízení
– obsahuje informace pro techniky o elektroinstalaci zařízení
– obsahuje informace nezbytné pro objednávání náhradních dílů od
společnosti Tetra Pak

Úvod i Introduction
Vzhled stránky
Viz obrázek (A) na stránce i-5: hlavní stránky v katalogu náhradních dílů se
skládají ze stránky s obrázkem (1) a z odpovídající katalogové stránky (7).
Číslo stránky (5) je uvedeno v záhlaví stránky s obrázkem a v zapatí
katalogové stránky. Číslo dokumentu (6) je uvedeno v záhlaví katalogové
stránky.
Číslování stránek
Viz obrázek (A) na stránce i-5: číslo stránky (5) se skládá ze tří částí:
• číslo kapitoly (2)
• číslo další stránky (3) v rámci kapitoly
• celkový počet stránek (4) v kapitole
Seznámení se zařízením
Výrobce
Název a adresa výrobce jsou uvedeny na druhé stránce tohoto katalogu.
Servis
Chcete-li objednat náhradní díly pro toto zařízení nebo chcete-li ohlásit
potíže spojené s provozem zařízení, obrat’te se na nejbližší pobočku
společnosti Tetra Pak.
S ostatními stížnostmi, připomínkami nebo zlepšovacími návrhy v
souvislosti se zařízením a dokumentací se obrat’te na zastoupení společnosti.
Označení
Klasifikace CE
Toto zařízení vyhovuje základním zdravotním a bezpečnostním směrnicím
EEA (European Economic Area).

Typový štítek
Na obrázku (B) na stránce i-5 je uveden příklad typového štítku zařízení.
Příslušné typové štítky a jejich umístění na zařízení jsou uvedeny v kapitole
Úvod v příručkách dodaných se zařízením. Typový štítek obsahuje níže
uvedené údaje, které je třeba uvést při kontaktování společnosti Tetra Pak
ohledně tohoto zařízení.
• typ zařízení (8)
• množství (9)
• označení schémat (10)
• sériové číslo zařízení (11)
• výrobce (12)
• symbol CE (13)
• rok výroby (14)
Na obrázku (C) na stránce i-5 je uveden příklad specifikace zařízení. Údaje

o zařízení uvedené na předních stránkách této příručky musí souhlasit s údaji
na typovém štítku a se specifikacemi zařízení.
Jak používat tento katalog náhradních dílů

Vyhledání čísla náhradního dílů
a) Viz obrázek (D) na stránce i-5: přejdete na číslo kapitoly (15) uvedené
vedle hlavní skupiny, která obsahuje hledaný díl.
Položky b) a c) odkazují na obrázek (E) na stránce i-6.

b) Na obrázku hlavní skupiny vyhledejte podskupinu zařízení (17)
která obsahuje hledaný díl nebo podskupinu. Zapamatujte si číslo
umístění (18) a přejděte na katalogovou stránku, která následuje
obrázek.
c) Vyhledejte číslo umístění (16) nebo název podskupiny (19). Přejděte
na příslušné číslo stránky (20) uvedené v pravém sloupci.
Položky d) a e) odkazují na obrázek (F) na stránce i-6.
d) Na obrázku podskupiny vyhledejte požadovaný díl (21) a poznamenejte
si číslo jeho umístění.
e) Na katalogové stránce je vedle čísla umístění uvedeno číslo dílu (29)
a popis (30).

Informace uvedené v katalogu náhradních dílů

Následující seznam odkazuje na obrázek (F) na stránce i-6. Katalog
náhradních dílů obsahuje následující informace o skupinách, podskupinách
a náhradních dílech pro toto zařízení:
• Označení struktury skupiny (22). Označuje další vyšší skupinu ve
struktuře katalogu zařízení.
• Název skupiny (23) .
• Měrné jednotky (25)
• Množství (26)
• Číslo schématu součásti (27)
• Rozsah katalogových stránek (28). Je uvedeno, pokud obrázek skupiny
nebo katalog obsahují více stránek.
• Číslo dílu nebo podskupiny (29)
• Název podskupiny nebo popis dílu (30)
• Číslo skupiny (31)
• Číslo zařízení (32)
• Nadpis informací o skupině (33). Označuje, zda se oddíl pod nadpisem
vztahuje na konkrétní variantu zařízení nebo představuje katalog
běžných dílů. Pokud některý katalog obsahuje více, než jednu variantu,
a pokud má každá varianta vlastní schéma součásti, zobrazí se odkaz
na stránku se schématem součásti dané varianty.
• Vnitřní informace (34)

i Introduction Indledning
Indledning
Information om manualen
Tetra Pak anbefaler, at alle leverede manualer læses omhyggeligt. Sørg for,
at de leverede manualer er tilgængelige for medarbejdere, der betjener eller
vedligeholder udstyret.
Det er vigtigt at opbevare dette katalog hele udstyrets levetid og give kataloget
videre til eventuelt kommende ejere eller brugere.
Tetra Pak kan ikke holdes ansvarlig for eventuel beskadigelse af udstyr, der
opstår, fordi instruktionerne i manualerne til dette udstyr ikke følges.
Leverede manualer
De manualer, der leveres sammen med dette udstyr, kan omfatte:
• Konverteringsmanual (CM)
Denne manual forsyner teknikere med informationer om konvertering af
udstyret mellem forskellige produktionstilstande.
• Elektrisk manual (EM)
Denne manual forsyner teknikere med informationer om udstyrets
elektriske system.
• Installationsmanual (IM)
Denne manual forsyner teknikere med informationer, der er nødvendige
for en sikker installation af udstyret.
• Vedligeholdelsesmanual (MM)
Denne manual forsyner teknikere med informationer om vedligeholdelse
af udstyret.
• Betjeningsmanual (OM)
Denne manual forsyner operatøren med informationer om håndtering og
betjening af udstyret før, under og efter produktion.
• Reservedelskatalog (SPC)
Denne manual indeholder de informationer, der er nødvendige for at kunne
bestille reservedele fra Tetra Pak.
• Teknisk manual (TeM)
– forsyner teknikere med informationer, der er nødvendige for en sikker
installation af udstyret.
– forsyner teknikere med informationer om vedligeholdelse af udstyret.
– forsyner teknikere med informationer om udstyrets elektriske system.
– indeholder de informationer, der er nødvendige for at kunne bestille
reservedele fra Tetra Pak.

Indledning i Introduction
Sidelayout
Se illustrationen (A) på side i-5: Hovedsiderne i et reservedelskatalog består
af en illustrationsside (1) og en tilsvarende listeside (7). Sidenummeret (5) vises
i sidehovedet på en illlustrationsside og i sidefoden på en listeside. Dokument-
nummeret (6) vises i sidefoden på en listeside.
Sidenummerering
Se illustrationen (A) på side i-5: Et sidenummer (5) har tre dele:
• kapitelnummer (2)
• fortløbende sidenummer i kapitlet (3)
• samlet sideantal i kapitlet (4)
Præsentation af maskinen
Producent
Producentens navn og adresse findes på side to i dette katalog.
Service
Kontakt nærmeste Tetra Pak-kontor for at bestille reservedele eller rapportere
problemer i forbindelse med betjening af denne maskine.
Kontakt kontaktpersonen med andre forespørgsler, kommentarer eller forslag
til forbedringer af udstyret og dets dokumentation.
Identifikation
CE-klassificering
Dette udstyr overholder de grundlæggende sundheds- og sikkerheds-
bestemmelser for Det Europæiske Økonomiske Samarbejdsområde (EØS).

i Introduction Indledning
Maskinskilt
Illustrationen (B) på side i-5 viser et eksempel på et maskinskilt. En illustration
af et gyldigt maskinskilt og dets placering på udstyret er vist i indlednings-
kapitlet i de manualer, der leveres med dette udstyr. Maskinskiltet indeholder
nedennævnte data. Disse er nødvendige ved kontakt med Tetra Pak vedrørende
dette specifikke udstyr.
• Maskintype (8)
• Volumen (9)
• Tegningsspecifikationer (10)
• Maskinens serienummer (11)
• Producent (12)
• CE-mærke (13)
• Produktionsår (14)
Illustrationen (C) på side i-5 viser et eksempel på en maskinspecifikation.

Kontroller, at de udstyrsdata, der er anført på de første sider i denne manual,
svarer til maskinskiltsdataene og maskinspecifikationen.
Sådan bruges dette reservedelskatalog

Find et reservedelsnummer
a) Se illustrationen (D) på side i-5: Gå til kapitelnummeret (15), der er angivet
ved siden af hovedgruppen, der indeholder den del, der ønskes fundet.
Punkterne b) og c) refererer til illustrationen (E) på side i-6.

b) I hovedgruppeillustrationen skal man se efter maskinundergruppen (17),
som indeholder den del eller undergruppe, der søges. Bemærk placerings-
nummeret (18), og gå til listesiden, som følger illustrationen.
c) Se efter placeringsnummeret (16) eller undergruppens navn (19). Gå til
det tilsvarende sidenummer (20) angivet i den højre kolonne.
Punkterne d) og e) refererer til illustrationen (F) på side i-6.
d) Find den del (21), du søger i undergruppeillustrationen, og notér delens
placeringsnummer.
e) Reservedelsnummeret (29) og -beskrivelsen (30) er angivet ved siden af
placeringsnummeret på listesiden.

Indledning i Introduction
Informationer der er angivet i et reservedelskatalog

Listen nedenfor refererer til illustrationen (F) på side i-6. Et reservedels-
katalog indeholder følgende informationer om grupper, undergrupper og
reservedele til udstyret:
• Gruppestrukturreference (22). Angiver næste overordnede gruppe i
udstyrslistestrukturen.
• Gruppenavn (23) .
• Måleenhed (25)
• Antal (26)
• Samletegningsnummer (27)
• Listens sideområde (28). Er angivet, hvis gruppeillustrationen eller -listen
inkluderer mange sider.
• Del- eller undergruppenummer (29)
• Undergruppens navn eller delsbeskrivelse (30)
• Gruppenummer (31)
• Udstyrsnummer (32)
• Overskrift for gruppeinformation (33). Angiver om afsnittet under over-
skriften er for en specifik maskinvariant, eller om det er en liste over fælles
dele. Hvis en liste har mere end én variant, og hver variant har sin egen
samletegning, vises en sidereference til variantens samletegning.
• Intern information (34)

i Introduction Einleitung
Einleitung
Handbuch-Informationen
Tetra Pak empfiehlt, alle gelieferten Handbücher sorgfältig zu lesen. Es muss
sichergestellt werden, dass die gelieferten Handbücher dem Bediener- oder
Wartungspersonal der Ausrüstung verfügbar sind.
Es ist wichtig, dieses Handbuch während der Lebensdauer der Ausrüstung
vorzuhalten und es an nachfolgende Halter oder Benutzer weiterzugeben.
Tetra Pak ist nicht verantwortlich für Schäden an der Ausrüstung, die durch
die Nichtbefolgung der Anweisungen dieses Handbuchs verursacht werden.
Gelieferte Handbücher
Die mit dieser Ausrüstung gelieferten Handbücher umfassen
• Umbauhandbuch (CM)
Dieses Handbuch liefert den Technikern Informationen über den Umbau
der Ausrüstung zwischen den verschiedenen Produktionsweisen.
• Elektrohandbuch (EM)
Dieses Handbuch liefert den Technikern Informationen zum
Elektrosystem der Ausrüstung.
• Installationshandbuch (IM)
Dieses Handbuch liefert den Technikern Informationen für die sichere
Installation der Ausrüstung.
• Wartungshandbuch (MM)
Dieses Handbuch liefert den Technikern Informationen über die Wartung
der Ausrüstung.
• Betriebshandbuch (OM)
Dieses Handbuch liefert dem Bediener Informationen über die
Handhabung und den Betrieb der Ausrüstung vor, während und nach der
Produktion.
• Ersatzteilkatalog (SPC)
Dieses Handbuch liefert Informationen, wie sie für die Bestellung von
Ersatzteilen bei Tetra Pak erforderlich sind.
• Technisches Handbuch (TeM)
– liefert den Technikern Informationen für die sichere Installation der
Ausrüstung
– liefert den Technikern Informationen über die Wartung der
Ausrüstung
– liefert den Technikern Informationen über das Elektrosystem der
Ausrüstung
– liefert die erforderlichen Informationen für die Bestellung von
Ersatzteilen bei Tetra Pak.

Einleitung i Introduction
Seitenlayout
Bezugnahme Abbildung (A) auf Seite i-5: Die Hauptseiten in einem
Ersatzteilkatalog bestehen aus einer Abbildungsseite (1) und einer
entsprechenden Listenseite (7). Die Seitennummer (5) ist im Kopf einer
Abbilldungsseite und im Fuß einer Listenseite aufgeführt. Die
Dokumentennummer (6) ist ist im Fuß einer Listenseite angegeben.
Seitennummerierung
Bezugnahme Abbildung (A) auf Seite i-5: Eine Seitennummer (5) besteht
aus drei Teilen:
• Kapitelnummer (2)
• Fortlaufende Seitennummer innerhalb des Kapitels (3)
• Gesamtanzahl der Seiten im Kapitel (4)
Einführung in die Maschine

Hersteller
Für Name und Anschrift des Herstellers, siehe die zweite Seite dieses
Kataloges.
Service
Um Ersatzteile für diese Maschine zu bestellen oder um über Probleme beim
Betrieb dieser Maschine zu berichten, ist das nächstgelegene Büro von
Tetra Pak anzusprechen.
Mit anderen Anfragen. Kommentaren oder Vorschlägen zur Ausrüstung und
der Dokumentation ist die Verbindungsstelle anzusprechen.
Identifizierung
CE-Klassifizierung
Diese Ausrüstung entspricht den grundlegenden Gesundheits- und
Sicherheitsvorschriften des Europäischen Wirtschaftsraumes (EEA).

i Introduction Einleitung
Maschinenschild
Die Abbildung (B) auf Seite i-5 zeigt das Beispiel eines Maschinenschildes.
Die Abbildung eines gültigen Maschinenschildes und die Lage desselben auf
der Ausrüstung befindet sich im Einleitungskapitel der mit der Ausrüstung
gelieferten Handbücher. Das Maschinenschild enthält die nachstehend
aufgeführten Daten, wie sie erforderlich sind, wenn Tetra Pak wegen dieser
spezifischen Ausrüstung anzusprechen ist.
• Maschinentyp (8)
• Volumen (9)
• Zeichnungs-Spezifikationen (10)
• Serien-Nummer der Maschine (11)
• Hersteller (12)
• CE-Markierung (13)
• Baujahr (14)
Die Abbildung (C) auf Seite i-5 zeigt das Beispiel einer
Maschinenspezifikation. Es muss sichergestellt sein, dass die in den
Frontseiten dieses Handbuchs aufgeführten Ausrüstungsdaten mit den Daten
des Maschinenschildes und der Maschinenspezifikation übereinstimmen.
Verwendung dieses Ersatzteilkatalogs

Anordnung einer Ersatzteilnummer
a) Bezugnahme auf Abbildung (D) auf Seite i-5: Weiter zur Kapitelnummer
(15), die neben der Hauptgruppe angegeben ist, die das entsprechende
Teil enthält.
Die Pos. b) und c) beziehen sich auf die Abbildung (E) auf Seite i-6.
b) Auf der Hauptgruppenabbildung die Maschinen-Untergruppe (17)
suchen, die das gesuchte Teil oder die gesuchte Untergruppe enthält.
Die Positionsnummer (18) notieren und weiter zur Listenseite gehen, die
der Abbildung folgt.
c) Die Positionsnummer (16) oder den Namen der Untergruppe (19)
suchen. Dann zur entsprechenden Seitennummer (20) in der rechten
Spalte gehen.
Pos. d) und e) beziehen sich auf die Abbildung (F) auf Seite i-6.
d) Suchen Sie Teil (21) auf der Untergruppen-Abbildung und notieren Sie
die Positionsnummer des Teils.
e) Die Teilnummer (29) und die Teilebeschreibung (30) finden Sie neben
der Positionsnummer auf der Listenseite.

Einleitung i Introduction
In einem Ersatzteilkatalog enthaltene Information

Die nachstehende Liste bezieht sich auf die Abbildung (F) auf Seite i-6.
Ein Ersatzteilkatalog enthält folgende Informationen über Gruppen,
Untergruppen und Ersatzteile für die Ausrüstung:
• Gruppenstrukturreferenz (22). Sie gibt die nächst höhere Gruppe in der
Ausrüstungslistenstruktur an
• Gruppenname (23)
• Maßeinheit (25)
• Menge (26)
• Nummer der Zusammenbauzeichnung (27)
• Listenseite, Bereich (28). Eingeschlossen, wenn Mehrfachseiten in der
Gruppenabbildung oder Liste enthalten sind
• Teile- oder Untergruppennummer (29)
• Untergruppenname oder Teilebeschreibung (30)
• Gruppennummer (31)
• Ausrüstungsnummer (32)
• Gruppeninformationsüberschrift (33). Gibt an, ob der Abschnitt unter
der Überschrift sich auf eine spezifische Maschinenvariante bezieht oder
eine Liste der allgemeinen Teile ist. Wenn eine Liste sich auf mehr als
eine Variante bezieht und jede Variante eine eigene
Zusammenbauzeichnung hat, wird eine Seitenreferenz zur
Zusammenbauzeichnung der Variante vorgestellt.
• Interne Information (34)

i Introduction Εισαγωγή
Εισαγωγή
Πληροφορίες για το Εγχειρίδιο
Η Tetra Pak σας συνιστά να διαβάζετε προσεκτικά όλα τα χορηγούµενα
εγχειρίδια. Βεβαιωθείτε ότι είναι διαθέσιµα όλα τα χορηγούµενα εγχειρίδια
για το προσωπικό που χειρίζεται ή συντηρεί τον εξοπλισµό.
Είναι σηµαντικό να διατηρείτε αυτό τον κατάλογο καθ' όλη τη διάρκεια ζωής
του εξοπλισµού καθώς και να παραδίδετε τον κατάλογο στον τυχόν επόµενο
ιδιοκτήτη ή χρήστη του εξοπλισµού.
Η Tetra Pak δεν πρόκειται να αναλάβει καµία ευθύνη για οποιαδήποτε ζηµιά
που προκαλείται στον εξοπλισµό λόγω της παράβλεψης των οδηγιών που
δίνονται στα εγχειρίδια που συνοδεύουν αυτό τον εξοπλισµό.
Χορηγούµενα Εγχειρίδια
Τα εγχειρίδια που χορηγούνται µ' αυτόν τον εξοπλισµό, µπορεί να
περιλαµβάνουν
• Εγχειρίδιο Μετατροπής (CM)
Αυτό το εγχειρίδιο χορηγεί στους τεχνικούς πληροφορίες για τη
µετατροπή του εξοπλισµού στους διαφορετικούς τρόπους παραγωγής.
• Εγχειρίδιο Ηλεκτρικού (EM)
Αυτό το εγχειρίδιο χορηγεί στους τεχνικούς πληροφορίες για το
ηλεκτρικό σύστηµα του εξοπλισµού.
• Εγχειρίδιο Εγκατάστασης (IM)
Αυτό το εγχειρίδιο χορηγεί στους τεχνικούς τις απαιτούµενες
πληροφορίες για την ασφαλή εγκατάσταση του εξοπλισµού.
• Εγχειρίδιο Συντήρησης (MM)
Αυτό το εγχειρίδιο χορηγεί στους τεχνικούς πληροφορίες για τη
συντήρηση του εξοπλισµού.
• Εγχειρίδιο Χρήσης (OM)
Αυτό το εγχειρίδιο χορηγεί στο χειριστή πληροφορίες για τη διακίνηση
και το χειρισµό του εξοπλισµού πριν, κατά τη διάρκεια και µετά την
παραγωγή.
• Κατάλογος Ανταλλακτικών (SPC)
Αυτό το εγχειρίδιο χορηγεί τις απαραίτητες πληροφορίες για την
παραγγελία ανταλλακτικών από την Tetra Pak.
• Τεχνικό Εγχειρίδιο (TeM)
– χορηγεί στους τεχνικούς τις απαιτούµενες πληροφορίες για την
ασφαλή εγκατάσταση του εξοπλισµού
– χορηγεί στους τεχνικούς πληροφορίες για τη συντήρηση του
εξοπλισµού
– χορηγεί στους τεχνικούς πληροφορίες για το ηλεκτρικό σύστηµα του
εξοπλισµού
– χορηγεί τις απαραίτητες πληροφορίες για την παραγγελία
ανταλλακτικών από την Tetra Pak

Εισαγωγή i Introduction
Σχεδίαση Σελίδας
Ανατρέξτε στην εικόνα (A) της σελίδας i-5: Οι κύριες σελίδες ενός Καταλόγου
Ανταλλακτικών αποτελούνται από µία εικονογραφηµένη σελίδα (1) και από
µία αντίστοιχη σελίδα καταλόγου (7). Ο αριθµός σελίδας (5) φαίνεται στην
κεφαλίδα µιας εικονογραφηµένης σελίδας και στο υποσέλιδο µιας σελίδας
καταλόγου. Ο αριθµός εγγράφου (6) φαίνεται στο υποσέλιδο µιας σελίδας
λίστας.
Αρίθµηση Σελίδων
Ανατρέξτε στην εικόνα (A) της σελίδας i-5: Ένας αριθµός σελίδας (5)
αποτελείται από τρία µέρη:
• αριθµός κεφαλαίου (2)
• αύξων αριθµός σελίδας του κεφαλαίου (3)
• συνολικός αριθµός σελίδων του κεφαλαίου (4)
Εισαγωγή στη Μηχανή

Κατασκευαστής
Για την επωνυµία και τη διεύθυνση του κατασκευαστή, βλέπετε στη δεύτερη
σελίδα αυτού του καταλόγου.
Σέρβις
Για να παραγγείλετε ανταλλακτικά για τη συγκεκριµένη µηχανή, ή για να
αναφέρετε προβλήµατα που σχετίζονται µε το χειρισµό αυτής της µηχανής,
επικοινωνήστε µε το πλησιέστερο γραφείο της Tetra Pak.
Εάν έχετε άλλου είδους ερωτήσεις, σχόλια ή προτάσεις βελτίωσης όσον
αφορά τον εξοπλισµό και την έγγραφη τεκµηρίωσή του, επικοινωνήστε µε
το Τµήµα Σχέσεων.
Αναγνώριση
Κατάταξη ΕΚ
Αυτός ο εξοπλισµός συµµορφώνεται µε τους βασικούς κανονισµούς υγείας
και ασφάλειας του Ευρωπαϊκού Οικονοµικού Χώρου (ΕΟΧ).

i Introduction Εισαγωγή
Πινακίδα Μηχανής
Η εικόνα (B) της σελίδας i-5 δείχνει ένα παράδειγµα µιας πινακίδας
µηχανής. Μια εικόνα της ενδεδειγµένης µορφής και θέσης της πινακίδας
µηχανής στον εξοπλισµό, υποδεικνύεται στο κεφάλαιο 'Εισαγωγή' των
εγχειριδίων που χορηγούνται µ' αυτόν τον εξοπλισµό. Η πινακίδα µηχανής
περιέχει τα στοιχεία που παρατίθενται παρακάτω, τα οποία χρειάζονται όταν
επικοινωνείτε µε την Tetra Pak για όσον αφορά αυτό το συγκεκριµένο
εξοπλισµό.
• Τύπος µηχανής (8)
• Όγκος (9)
• Προδιαγραφές σχεδίου (10)
• Αριθµός σειράς µηχανής (11)
• Κατασκευαστής (12)
• Σήµα ΕΚ (13)
• Έτος κατασκευής (14)
Η εικόνα (C) της σελίδας i-5 δείχνει ένα παράδειγµα τεχνικών χαρακτηριστικών
µηχανής. Βεβαιωθείτε ότι τα στοιχεία εξοπλισµού που παρατίθενται στις
πρώτες σελίδες αυτού του εγχειριδίου αντιστοιχούν µε τα στοιχεία της
πινακίδας µηχανής και τα τεχνικά χαρακτηριστικά µηχανής.
Πώς Χρησιµοποιείται Αυτός ο Κατάλογος

Ανταλλακτικών
Εντοπισµός ενός Αριθµού Ανταλλακτικού
a) Ανατρέξτε στην εικόνα (D) της σελίδας i-5: Πηγαίνετε στον αριθµό
κεφαλαίου (15) που υποδεικνύεται δίπλα από το κύριο συγκρότηµα το
οποίο περιλαµβάνει το εξάρτηµα που θέλετε να εντοπίσετε.
Τα βήµατα b) και c) αναφέρονται στην εικόνα (E) της σελίδας i-6.

b) Στην εικόνα της κύριου συγκροτήµατος, αναζητήστε το υποσυγκρότηµα
µηχανής (17) που περιλαµβάνει το εξάρτηµα ή το υποσυγκρότηµα που
αναζητάτε. Σηµειώστε τον αριθµό θέσης (18) και πηγαίνετε στη σελίδα
καταλόγου που ακολουθεί την εικόνα.
c) Αναζητήστε τον αριθµό θέσης (16) ή το όνοµα υποσυγκροτήµατος (19).
Πηγαίνετε στον αντίστοιχο αριθµό σελίδας (20) που αναγράφεται στη
δεξιά στήλη.
Τα βήµατα d) και e) αναφέρονται στην εικόνα (F) της σελίδας i-6.
d) Εντοπίστε το εξάρτηµα (21) που αναζητάτε στην εικόνα
υποσυγκροτήµατος και σηµειώστε τον αριθµό θέσης του εξαρτήµατος.
e) Ο αριθµός του εξαρτήµατος (29) και η περιγραφή του εξαρτήµατος (30)
παρατίθενται δίπλα στον αριθµό θέσης στη σελίδα καταλόγου.

Εισαγωγή i Introduction
Πληροφορίες που Περιέχονται σε έναν Κατάλογο

Ανταλλακτικών
Ο παρακάτω κατάλογος αναφέρεται στην εικόνα (F) της σελίδας i-6. Ένας
Κατάλογος Ανταλλακτικών περιέχει τις ακόλουθες πληροφορίες σχετικά µε
συγκροτήµατα, υποσυγκροτήµατα και ανταλλακτικά του εξοπλισµού:
• Αναφορά συγκροτήµατος κατασκευής (22). Υποδεικνύει το επόµενο
µεγαλύτερο συγκρότηµα στον πίνακα εξοπλισµού κατασκευής.
• Όνοµα συγκροτήµατος (23) .
• Μονάδα µέτρησης (25)
• Ποσότητα (26)
• Αριθµός σχεδίου συναρµολόγησης (27)
• Σειρά σελίδων καταλόγου (28). Περιλαµβάνεται εάν υπάρχουν
πολλαπλές σελίδες στην εικόνα ή στον κατάλογο συγκροτήµατος.
• Αριθµός εξαρτήµατος ή υποσυγκροτήµατος (29)
• Όνοµα υποσυγκροτήµατος ή περιγραφή εξαρτήµατος (30)
• Αριθµός συγκροτήµατος (31)
• Αριθµός εξοπλισµού (32)
• Επικεφαλίδα πληροφοριών συγκροτήµατος (33). Υποδεικνύει εάν η
ενότητα κάτω από την επικεφαλίδα αφορά µια ειδική παραλλαγή
µηχανής ή είναι ένας κατάλογος κοινών εξαρτηµάτων. Εάν ένας
κατάλογος περιέχει περισσότερες από µία παραλλαγές και κάθε
παραλλαγή έχει το δικό της σχέδιο συναρµολόγησης, υποδεικνύεται µια
παραποµπή στη σελίδα σχεδίου συναρµολόγησης της παραλλαγής.
• Εσωτερικές πληροφορίες (34)

i Introduction Introducción
Introducción
Información del manual
Tetra Pak recomienda que se lean cuidadosamente todos los manuales
entregados. Comprobar que todos los manuales entregados estén disponibles
para el personal que efectúe la operación o el mantenimiento del equipo.
Es importante conservar este manual durante la vida útil del equipo, así como
facilitárselo a cualquier propietario o usuario posterior.
Tetra Pak no se responsabilizará de daños en la máquina o equipo debidos a
la inobservancia de las instrucciones dadas en los manuales que acompañan
este equipo.
Manuales entregados
Los manuales entregados con este equipo pueden incluir
• Manual de conversión (CM)
Este manual proporciona a los técnicos información sobre cómo
convertir el equipo entre diferentes modos de producción.
• Manual eléctrico (EM)
Este manual proporciona a los técnicos información acerca del sistema
eléctrico del sistema.
• Manual de instalación (IM)
Este manual proporciona a los técnicos la información necesaria para la
instalación segura del equipo.
• Manual de mantenimiento (MM)
Este manual proporciona a los técnicos la información acerca del
mantenimiento del equipo.
• Manual de servicio (OM)
Este manual proporciona al operador información acerca de la
manipulación y operación de la máquina antes, durante y después de la
producción.
• Catálogo de piezas de recambio (SPC)
Este manual proporciona la información necesaria para pedir piezas de
recambio a Tetra Pak.
• Manual técnico (TeM)
– proporciona a los técnicos la información necesaria para la instalación
segura del equipo
– proporciona a los técnicos la información acerca del mantenimiento
del equipo
– proporciona a los técnicos información acerca del sistema eléctrico
del sistema
– proporciona la información necesaria para pedir piezas de recambio a
Tetra Pak

Introducción i Introduction
Organización de las páginas

Remitirse a la ilustración (A) en la página i-5: Las páginas principales en un
Catálogo de piezas de recambio se componen de una página de ilustración
(1) y una página de lista correspondiente (7). El número de la página (5) se
muestra en el encabezado de una página de ilustración y en el pie de página
de una página de lista. El número del documento (6) se muestra en el pie de
página de una página de lista.
Numeración de las páginas
Remitirse a la ilustración (A) en la página i-5: Un número de página (5) se
compone de tres partes:
• Número de capítulo (2)
• número de página consecutivo (2) dentro del capítulo (3)
• número total de páginas del capítulo (4)
Introducción a la máquina
Fabricante
Para el nombre y la dirección del fabricante, ver la segunda página de este
catálogo.
Servicio
Para pedir piezas de recambio para esta máquina o informar problemas
asociados con la operación de esta máquina, contactar con la oficina de
Tetra Pak más cercana.
Ponerse en contacto con el responsable correspondiente para otras preguntas,
comentarios o sugerencias sobre mejoras de la máquina o equipo y su
documentación.
Identificación
Clasificación de la CE
Este equipo cumple los requisitos esenciales relativos a la salud y la
seguridad del Área Económica Europea (EEA).

i Introduction Introducción
Placa de la máquina
La ilustración (B) en la página i-5 muestra un ejemplo de placa de máquina.
En la Introducción del capítulo de los manuales entregados con este equipo
se muestra una ilustración de la placa de máquina válida y su ubicación en el
equipo La placa de máquina contiene los datos listados a continuación
requeridos al contactar con Tetra Pak en relaciôn a este equipo específico.
• Tipo de máquina (8)
• Volumen (9)
• Especificaciones de plano (10)
• Número de serie de la máquina (11)
• Fabricante (12)
• Marca de la CE (13)
• Año de fabricación (14)
La ilustración (C) en la página i-5 muestra un ejemplo de especificación

máquina. Asegúrese que los datos de equipo listados en las páginas de
cubierta de este manual corresponden a los datos de la placa de máquina y la
especificación máquinav.
Cómo utilizar este Catálogo de piezas de

recambio
Localizar un número de pieza de recambio
a) Remitirse a la ilustración (D) en la página i-5: Ir al número de capítulo
(15) indicado detrás el grupo principal que contiene la parte que usted
desea localizar.
Los items b) y c) se refieren a la ilustracióni (E) en la página i-6.
b) En la ilustración del grupo principal, buscar el subgrupo máquina (17)
que contiene la pieza o subgrupo que usted busca. Anote el número de
posición (18) y vaya a la página de lista que sigue la ilustración.
c) Busque el número de posición (16) o el nombre del subgrupo (19).
Vaya al número de página correspondiente (20) listado en la columna de
la derecha.
Los items d) y e) se refieren a la ilustración (F) en la página i-6.
d) Localizar la pieza (21) que busca en la ilustración del subgrupo y anotar
el número de posición de la pieza.
e) El número de pieza (29) y la descripción de pieza (30) están listadas
detrás del número de posición en la página de lista.

Introducción i Introduction
Información listada en un Catálogo de piezas de recambio

La lista a continuación remite a la ilustración (F) en la página i-6.
Un Catálogo de piezas de recambio contiene la siguiente información sobre
grupos, subgrupos y piezas de recambio para el equipo:
• Referencia de estructura de grupo (22). Indica el siguiente grupo más
alto en la estructura de lista del equipo.
• Nombre del grupo (23) .
• Unidad de medida (25)
• Cantidad (26)
• Número de plano de conjunto (27)
• Gama de página lista (28). Incluida si hay páginas múltiples en la
ilustración o lista de grupo.
• Número de pieza o subgrupo (29)
• Nombre, subgrupo o descripción de pieza (30)
• Número de grupo (31)
• Número de equipo (32)
• Encabezado de información grupo (33). Indica si la sección debajo del
encabezado es para una variante máquina específica o si es una lista de
piezas comunes. Si la lista tiene más de una variante y cada variante
tiene su propio plano de conjunto, se muestra una referencia página para
el plano de conjunto de la variante.
• Información interna (34)

i Introduction Sissejuhatus
Sissejuhatus
Kasutusjuhendi teave
Tetra Pak soovitab lugeda hoolega kõiki kaasasolevaid juhendeid. Veenduge,
et juhendid on seadmega töötavatele ja neid hooldavatele töötajatele
kättesaadavad.
Oluline on hoida kataloog alles kogu seadme eluea jooksul ja anda kataloog
kaasa ka järgmisele omanikule või kasutajale.
Tetra Pak ei vastuta seadme kahjustuste eest, mille põhjuseks on seadmega
kaasasolevas juhendis toodud juhiste mittejärgimine.
Kaasasolevad juhendid
Seadmega kaasasolevad juhendid võivad sisaldada järgmist:
• Konverteerimisjuhend (ÜJ)
Juhend annab tehnikutele teavet seadme konverteerimise kohta eri
tootmisrežiimide korral.
• Elektrijuhend (EJ)
Juhend annab tehnikutele teavet seadme elektrisüsteemi kohta.
• Paigaldusjuhend (PJ)
Juhend annab tehnikutele teavet seadme ohutu paigaldamise kohta.
• Hooldusjuhend (HJ)
Juhend annab tehnikutele teavet seadme hoolduse kohta.
• Kasutusjuhend (KJ)
Juhend annab operaatorile teavet seadme käitlemise ja töö kohta enne
tootmist, selle ajal ja pärast seda.
• Varuosade kataloog (VOK)
Juhend annab Tetra Pakilt varuosade tellimiseks vajalikku teavet.
• Tehniline juhend (TJ)
– annab tehnikutele seadme ohutuks paigaldamiseks vajalikku teavet
– annab tehnikutele teavet seadme hoolduse kohta
– annab tehnikutele teavet seadme elektrisüsteemi kohta
– annab Tetra Pakilt varuosade tellimiseks vajalikku teavet

Sissejuhatus i Introduction
Küljend
Vt illustratsiooni (A) lk i-5: Varuosade kataloogi põhilehtedeks on
illustratsioonilehed (1) ja vastavad loetelulehed (7). Lehekülje number (5)
on toodud illustratsioonilehe päises ja loetelulehe jaluses. Dokumendi
number (6) on toodud loetelulehe jaluses.
Leheküljenummerdus
Vt illustratsiooni (A) lk i-5: Lehekülje number (5) koosneb kolmest osast:
• peatüki number (2)
• lehekülgede järjestikused numbrid peatüki sees (3)
• lehekülgede koguarv peatükis (4)
Sissejuhatus masina kohta

Tootja
Tootja nimi ja aadress on toodud kataloogi teisel lehel.
Teenindus
Varuosade tellimiseks masinale või selle tööga seotud probleemidest
teatamiseks võtke ühendust lähima Tetra Pak kontoriga.
Kui teil on muid küsimusi, märkusi või soovitusi seadmete ja
dokumentatsiooni täiustamise kohta, võtke ühendust Tetra Paki
kontaktisikuga.
Identifitseerimine
CE-klassifikatsioon
Seade vastab Euroopa Majanduspiirkonna (EMP) põhilistele tervisekaitse
ja ohutuse alastele määrustele.

i Introduction Sissejuhatus
Masina andmeplaat
Illustratsioon (B) leheküljel i-5 kujutab masina andmeplaati.
Masina andmeplaadi pilt ja selle asukoht seadmel on toodud seadmega
kaasasolevate juhendite sissejuhatavas peatükis. Masina andmeplaadil
on allpool nimetatud andmed, mida vajate antud konkreetse seadmega
seoses Tetra Paki poole pöördudes.
• Masina tüüp (8)
• Maht (9)
• Joonisspetsifikatsioonid (10)
• Masina seerianumber (11)
• Tootja (12)
• CE-tähis (13)
• Tootmisaasta (14)
Illustratsioon (C) leheküljel i-5 kujutab masina spetsifikatsiooni. Veenduge,

et käesoleva juhendi esimestel lehekülgedel toodud andmed seadme kohta
vastavad masina andmesildil olevatele andmetele ja masina
spetsifikatsioonile.
Kuidas varuosade kataloogi kasutada

Leidke varuosa number
a) Vt illustratsiooni (D) lk i-5: Leidke peatükk, mille number (15) on
toodud selle põhirühma juures, mis sisaldab teie poolt otsitavat varuosa.
Punktid b) ja c) käivad illustratsiooni (E) kohta lk i-6.

b) Põhirühma illustratsioonil leidke masina alarühm (17), mis sisaldab osa
või alarühma, mida otsite. Leidke positsiooni number (18) ja avage siis
illustratsioonile järgnev loeteluleht.
c) Leidke positsiooni number (16) või alarühma nimetus (19). Leidke
vastav leheküljenumber (20) parempoolsest veerust.
Punktid d) ja e) käivad illustratsiooni (F) kohta lk i-6.
d) Leidke otsitav osa (21) alarühma illustratsioonilt ja siis osa
positsiooninumber.
e) Osa number (29) ja osa kirjeldus (30) on toodud positsiooninumbri
kõrval loetelulehel.

Sissejuhatus i Introduction
Varuosade kataloogis toodud teave

Allpool toodud loetelu käib illustratsiooni (F) kohta lk i-6. Varuosade
kataloogis on järgmine teave seadme rühmade, alarühmade ja varuosade
kohta:
• Rühmastruktuuri viide (22). Esitab järgmise kõrgema rühma seadmete
loetelu struktuuris.
• Rühma nimetus (23) .
• Mõõtühik (25)
• Kogus (26)
• Koostejoonise number (27)
• Loetelu lehekülgede vahemik (28). Märgitud, kui rühma illustratsioonid
või loetelu on mitmel lehel.
• Osa või alarühma number (29)
• Alarühma nimetus või osa kirjeldus (30)
• Rühma number (31)
• Seadme number (32)
• Rühma teabe rubriik (33). Näitab, kas rubriigi all toodud jaotis on
konkreetse masinavariandi kohta või on tegemist tavaliste varuosade
loeteluga. Kui loetelus on üle ühe variandi ja iga variandi jaoks on oma
koostejoonis, esitatakse viide selle variandi koostejoonise leheküljele.
• Siseteave (34)

i Introduction Johdanto
Johdanto
Tietoja käsikirjasta
Tetra Pak suosittelee kaikkien toimitettavien oppaiden lukemista huolellisesti.
Varmista, että toimitetut oppaat ovat laitetta käyttävän tai huoltavan
henkilökunnan saatavilla.
Tämä luettelo on säilytettävä laitteen käyttöiän ajan ja toimitettava edelleen
mahdolliselle seuraavalle omistajalle tai käyttäjälle.
Tetra Pak ei vastaa laitevaurioista, jotka aiheutuvat laitteen mukana tulevissa
oppaissa annettujen ohjeiden noudattamatta jättämisestä.
Toimitettavat ohjeet
Tämän laitteen mukana toimitettaviin ohjeisiin kuuluvat:
• Muutoskirja (CM)
Tässä oppaassa on teknikoille tarkoitettuja ohjeita laitteiston
muuttamisesta eti tuotantotiloihin.
• Sähkökirja (EM)
Tässä oppaassa on teknikoille tarkoitettuja tietoja laitteen
sähköjärjestelmästä.
• Asennuskäsikirja (IM)
Tässä oppaassa on teknikoille tarkoitettuja tietoja, jotka tarvitaan laitteen
turvallista asentamista varten.
• Huoltokäsikirja (MM)
Tässä oppaassa on teknikoille tarkoitettuja tietoja tämän laitteen
huoltamisesta.
• Käyttäjän käsikirja (OM)
Tässä oppaassa on käyttäjälle tarkoitettuja tietoja laitteiston käsittelystä
ja käyttämisestä ennen tuotantoa, tuotannon aikana ja sen jälkeen.
• Varaosakuvasto (SPC)
Tässä oppaassa on tietoja, joita tarvitaan varaosien tilaamiseen
Tetra Pakilta.
• Tekninen käsikirja (TeM)
– sisältää teknikoille tarkoitettuja tietoja, joita tarvitaan laitteen
turvallista asentamista varten
– sisältää teknikoille tarkoitettuja tietoja laitteen huoltamisesta
– sisältää teknikoille tarkoitettuja tietoja laitteen sähköjärjestelmästä
– sisältää tietoja, joita tarvitaan varaosien tilaamiseen Tetra Pakilta.

Johdanto i Introduction
Sivujen asettelu
Katso kuva (A) sivulla i-5: Varaosaluettelon pääsivut koostuvat kuvasivusta (1)
ja sitä vastaavasta luettelosivusta (7). Sivunumero (5) näytetään kuvasivun
ylätunnisteessa ja luettelosivun alatunnisteessa. Asiakirjan numero (6) näytetään
luettelosivun alatunnisteessa.
Sivunumerointi
Katso kuva (A) sivulla i-5: Sivunumerossa (5) on kolme osaa:
• luvun numero (2)
• perättäinen sivunumero (3) luvun sisällä
• luvun kokonaissivumäärä (4).
Koneen esittely
Valmistaja
Valmistajan nimi ja osoite on ilmoitettu tämän luettelon toisella sivulla.
Huolto
Jos haluat tilata tähän koneeseen varaosia tai jos tämän koneen käytössä ilmenee
ongelmia, jotka haluat raportoida, ota yhteyttä lähimpään Tetra Pakin toimistoon.
Jos sinulla on muuta kysyttävää, huomautettavaa tai ehdotuksia laitteistoa ja
sen asiakirjoja koskevista parannuksista, ota yhteys yhteyshenkilöön.
Tunnistetiedot
CE-luokitus
Tämä laite vastaa Euroopan talousalueen (EEA) perustason terveys- ja
turvallisuusvaatimuksia.

i Introduction Johdanto
Koneen tyyppikilpi
Kuvassa (B) sivulla i-5 on esimerkki koneen tyyppikilvestä. Voimassa olevan
tyyppikilven kuva ja sen sijainti koneessa käy ilmi laitteiston mukana tulleiden
ohjeiden Johdanto-luvusta. Tyyppikilvessä on tarvitsemasi Tetra Pakin voimassa
olevat yhteystiedot, kun on kyseessä tämä nimenomainen laite.
• Konetyyppi (8)
• Tilavuus (9)
• Piirustuserittelyt (10)
• Koneen sarjanumero (11)
• Valmistaja (12)
• CE-merkki (13)
• Valmistusvuosi (14)
Kuvassa (C) sivulla i-5 on esimerkki koneen erittelystä. Varmista, että tämän
ohjeen etusivuilla ilmoitetut laitetiedot vastaavat tyyppikilven ja kone-erittelyn
tietoja.
Tämän varaosaluettelon käyttäminen

Etsi varaosan numero
a) Katso kuva (D) sivulla i-5: Siirry lukuun (15), joka on ilmoitettu etsittävän
osan pääryhmän vieressä.
Kohdat b) ja c) viittaavat kuvaan (E) sivulla i-6.

b) Etsi pääryhmän kuvasta koneen alaryhmä (17), joka sisältää etsimäsi
osan tai alaryhmän. Merkitse muistiin paikkanumero (18) ja siirry
luettelosivulle, joka seuraa kuvaa.
c) Etsi paikkanumero (16) tai alaryhmän nimi (19). Siirry vastaavalle
sivunumerolle (20), joka on ilmoitettu oikeassa sarakkeessa.
Kohdat d) ja e) viittaavat kuvaan (F) sivulla i-6.
d) Hae etsittävä osa (21) alaryhmän kuvasta ja merkitse osan paikkanumero
muistiin.
e) Osanumero (29) ja osan kuvaus (30) on annettu paikkanumeron vieressä
luettelosivulla.

Johdanto i Introduction
Varaosaluettelossa olevat tiedot

Alla oleva luettelo viittaa kuvaan (F) sivulla i-6. Varaosaluettelo sisältää
seuraavat tiedot ryhmistä, alaryhmistä ja laitteen varaosista:
• Ryhmärakenneviite (22). Osoittaa seuraavaksi ylemmän ryhmän
laiteluettelorakenteessa.
• Ryhmän nimi (23) .
• Mittayksikkö (25)
• Määrä (26)
• Kokoonpanopiirustuksen numero (27)
• Luettelosivun väli (28). Tämä on mukana, jos ryhmäkuvassa tai luettelossa
on useita sivuja.
• Osan tai alaryhmän numero (29)
• Alaryhmän nimi tai osan kuvaus (30)
• Ryhmän numero (31)
• Laitteen numero (32)
• Ryhmätietojen otsikko (33). Osoittaa, koskeeko alla oleva osio tiettyä
koneversiota vai onko kyseessä yleisten osien luettelo. Jos luettelolla
on useampi kuin yksi versio ja kullakin versiolla on oma
kokoonpanopiirustuksensa, näytetään version kokoonpanopiirustuksen
sivuviittaus.
• Sisäiset tiedot (34)

Introduction
Information sur le manuel
Tetra Pak recommande de lire attentivement tous les manuels fournis.
S'assurer que les manuels fournis soient accessibles au personnel qui
s'occupe du fonctionnement ou de la maintenance de l'équipement.
Il est important de conserver ce manuel pendant toute la durée d'utilisation de
la machine et de le transmettre à tout détenteur ou utilisateur ultérieur.
Tetra Pak ne sera pas tenu responsable d’un dommage causé à la machine ou
à l’équipement par le fait de ne pas avoir respecté les instructions figurant
dans le présent manuel.
Manuels fournis
Les manuels fournis avec cette machine comprennent
• Le Manuel de Conversion (CM)
Ce manuel fournit aux techniciens les informations nécessaires pour
convertir la machine en vue des différents modes de production.
• Manuel Electrique (EM)
Ce manuel fournit aux techniciens les informations sur le système
électrique de la machine.
• Manuel de Mise en Place (IM)
Ce manuel fournit aux techniciens les informations nécessaires pour
l'installation de la machine en toute sécurité.
• Manuel de Maintenance (MM)
Ce manuel fournit aux techniciens les informations pour la maintenance.
• Manuel d'Opérateur (OM)
Ce manuel fournit aux opérateurs les informations nécessaires pour la
manutention et le fonctionnement de la machine avant, pendant et après
la production.
• Catalogue de Pièces de Rechange (SPC)
Ce manuel fournit l'information nécessaire à la commande de pièces de
rechange auprès de Tetra Pak
• Manuel Technique (TeM)
– fournit aux techniciens les informations nécessaires pour l'installation
de la machine en toute sécurité
– fournit aux techniciens les informations pour la maintenance
– fournit aux techniciens les informations sur le système électrique de
la machine
– fournit l' information nécessaire à la commande de pièces de rechange
auprès de Tetra Pak

Présentation d’une page

Se référer à la figure (A) à la page i-5: Les pages principales du Catalogue
des Pièces de Rechange sont composées d'une page de figure (1) et d'une
page de liste correspondante (7). Le numéro de page (5) est indiqué dans le
titre de la page de figure et dans le bas de page d'une page de liste.
Le numéro de document (6) est indiqué dans le bas de page de la page de
liste.
Numérotation de page
Se référer (A) à la page i-5: Un numéro de page (5) possède trois parties:
• Numéro de chapitre (2)
• numéro de page consécutif (2) à l'intérieur du chapitre (3)
• nombre total de pages dans le chapitre (4)
Présentation de la machine
Fabricant
Pour le nom et l'adresse du fabricant, voir la deuxième page de ce catalogue.
Assistance technique
Pour commander les pièces de rechange de cette machine ou pour rapporter
les problèmes associés au fonctionnement de celle-ci, prendre contact avec le
bureau Tetra Pak le plus proche.
Prendre contact avec le responsable de liaison pour les renseignements,
commentaires ou suggestions concernant la machine ou l’équipement et sa
documentation.
Identification
Certification CE
Cet équipement est conforme aux réglementations essentielles d'hygiène et
de sécurité de la Communauté Economique Européenne (CEE).

Plaque signalétique de machine

La figure (B) à la page i-5 montre un exemple d'une plaque signalétique de
machine.
Une représentation de la plaque de machine valable et son emplacement sur
l'équipement est indiquée au Chapitre Introduction des manuels fournis avec
l'équipement. La plaque de machine contient les caractéristiques figurant
dans la liste ci-dessous, nécessaires pour prendre contact avec Tetra Pak au
sujet de cet équipement spécifique.
• Type de machine (8)
• Volume (9)
• Spécifications du plan (10)
• Numéro de série de la machine (11)
• Fabricant (12)
• Marquage CE (13)
• Année de fabrication (14)
La figure (C) à la page i-5 montre un exemple d'une spécification de

machine. S'assurer que les caractéristiques de l'équipement figurant dans la
liste des pages de garde de ce manuel correspondent aux caractéristiques de
la plaque signalétique de la machine et à ses spécifications.
Comment utiliser ce Catalogue de Pièces de

Rechange
Localiser un numéro de pièce de rechange
a) Se référer à la figure (D) à la page i-5: Aller au numéro de chapitre (15)
indiqué à côté du groupe principal qui contient la pièce que vous
souhaitez localiser.
Les articles b) et c) se réfèrent à la figure (E) à la page i-6.
b) Sur la figure du groupe principal, chercher la sous-groupe de machine
(17) qui contient la pièce ou le sous-groupe que vous recherchez.
Noter le numéro de repère (18) et aller à la page de liste qui suit la figure.
c) Rechercher le numéro de repère (16) ou le nom de sous-groupe (19).
Aller au numéro de page correspondant (20) figurant dans la liste de la
colonne de droite.
Les articles d) et e) se réfèrent à la figure (F) à la page i-6.
d) Localiser la pièce (21) que vous recherchez sur la figure de sous-groupe
et noter le numéro de repère de la pièce.
e) Le numéro de pièce (29) et la description de la pièce (30) figurent dans la
liste à côté du numéro de repère sur la page de liste.

Informations figurant dans la liste dans un Catalogue de

Pièces de Rechange
La liste ci-dessous se réfère à la figure (F) à la page i-6. Un Catalogue de
Pièces de Rechange contient les renseignements suivants relatifs aux
groupes, sous-groupes et pièces de rechange de l'équipement:
• Référence de structure de groupe (22). Indique le groupe supérieur
suivant dans la structure de liste d'équipement.
• Nom du groupe
. (23).
• Unité de mesure (25).
• Quantité (26).
• Numéro de plan de montage (27).
• Gamme de la page de liste (28). Incluse s'il y a des pages multiples dans
la figure de groupe ou dans la liste.
• Numéro de pièce ou de sous-groupe (29).
• Nom de sous-groupe ou description de la pièce (30).
• Numéro de groupe (31).
• Numéro de l'équipement (32).
• Titre des informations de groupe (33). Indique si la section sous le titre
est pour une variante de machine spécifique ou s'il y a une liste de pièces
communes. Si une liste comporte plus d'une variante et que chaque
variante possède son propre plan de montage, une référence de page au
plan de montage de la variante est alors indiqué.
• Renseignements internes (34).

i Introduction Bevezetés
Bevezetés
Kézikönyv információ
A Tetra Pak az összes rendelkezésre bocsátott kézikönyv figyelmes
elolvasását ajánlja. Győződjön meg arról, hogy a rendelkezésre bocsátott
kézikönyveket hozzáférhetővé tették a berendezést kezelő és karbantartó
személyzet számára.
Föltétlenül őrizzék meg ezen kézikönyvet a berendezés teljes élethossza
alatt, és adják át a következő tulajdonosnak vagy felhasználónak.
A Tetra Pak nem vonható felelősségre a berendezést ért olyan károkért,
amelyek a kézikönyvben meghatározott utasítások be nem tartásából
erednek.
Rendelkezésre bocsátott kézikönyvek
A géppel vagy berendezéssel együtt a következő dokumentumokat szállítjuk
• Karbantartási kézikönyv (CM)
Ezen kézikönyv a technikusok számára szolgáltat adatokat a berendezés
átkapcsolásáról egyik üzemmódból a másikba.
• Elektromos kézikönyv (EM)
Ezen kézikönyv a villamosmérnökök és szervizelő technikusok számára
szolgáltat adatokat a berendezés elektromos hálózatáról.
• Beszerelési kézikönyv (IM)
Ezen kézikönyv a berendezés biztonságos beszerelésével kapcsolatos
adatokat szolgáltat a technikusoknak.
• Karbantartási kézikönyv (MM)
Ezen kézikönyv a technikusok számára szolgáltat adatokat a berendezés
karbantartásáról.
• Kezelési kézikönyv (OM)
Ezen kézikönyv a berendezés kezelésével és vezérlésével kapcsolatos
adatokat szolgáltat a kezelőknek termelés előtt, közben és után.
• Cserealkatrész katalógus (SPC)
Ezen kézikönyv a cserealkatrészek Tetra Pak cégtől való
megrendeléséhez szükséges adatokat tartalmaz.
• Műszaki kézikönyv (TeM)
– a berendezés biztonságos beszerelésével kapcsolatos adatokat
szolgáltat a technikusoknak
– a technikusok számára szolgáltat adatokat a berendezés
karbantartásáról
– a villamosmérnökök és szervizelő technikusok számára szolgáltat
adatokat a berendezés elektromos hálózatáról
– a cserealkatrészek Tetra Pak cégtől való megrendeléséhez szükséges
adatokat tartalmaz

Bevezetés i Introduction
Lap elrendezése
Tekintse meg a i-5 oldalon levő ábrát (A): A Cserealkatrészek katalógusának
főoldalai egy rajzoldalból (1) és egy hozzá tartozó listaoldalból (7) állnak.
Az oldalszám (5) a rajzoldal fejlécében és a listaoldal láblécében jelenik
meg. A dokumentumszám (6) a listaoldal láblécében jelenik meg.
Oldalszámozás
Tekintse meg a i-5 oldalon levő ábrát (A): Az oldalszám (5) három részből
áll:
• fejezetszám (2)
• folytonos oldalszám (3) a fejezeten belül
• fejezet oldalszáma (4)
A gép bemutatása
Gyártó
A gyártó neve és címe ezen katalógus, második oldalán található.
Szervizelés
Ezen gép valamely cserealkatrészének megrendelése vagy a gép
működésével kapcsolatos üzemzavarok bejelentése végett, forduljon
a legközelebbi Tetra Pak képviselethez.
Bármilyen más, a berendezés, illetve dokumentációjának feljavítására
irányuló kérdéseivel, megjegyzéseivel vagy javaslataival forduljon
kapcsolattartóhoz.
Azonosítás
CE besorolás
Ezen berendezés megfelel az Európai Gazdasági Régió (EEA) alapvető
egészségügyi és biztonsági előírásainak.

i Introduction Bevezetés
A gép adattáblája
A i-5 oldalon található ábra (B) a gép adattáblájának egyik példája.
A megfelelő gép-adattábla ábrája és helye a berendezésen a berendezéssel
szállított kézikönyvek Bevezetés fejezetében található. A gép adattáblája
az alább felsorolt adatokat tartalmazza, amelyek ezen berendezésre
vonatkoznak, és a Tetra Pak céggel való kapcsolat felvételekor szükségesek.
• Géptípus (8)
• Térfogat (9)
• Tervrajz (10)
• A gép sorozatszáma (11)
• Gyártó (12)
• CE jelzés (13)
• Gyártás éve (14)
A i-5 oldalon található ábra (C) példa a gép műszaki leírására. Győződjön
meg arról, hogy ezen kéziköny előlapjain közölt berendezésadatok
megegyeznek a gép adattábláján és a gép műszaki leírásában megjelenő
információval.
A Cserealkatrészek katalógus használata

Keresse meg a cserealkatrész számát
a) Tekintse meg a i-5 oldalon levő ábrát (D): Lapozzon a keresett alkatrészt
tartalmazó főcsoport mellett feltüntetett számú (15) fejezetre.
A b) és c) elemek a i-6 oldalon levő ábrára vonatkoznak.

b) A főcsoport-ábrán keresse meg azt az alcsoportot (17), amelyik
a keresett alkatrészt vagy alcsoportot tartalmazza. Jegyezze le
a helyszámot (18), majd lapozzon az ábrát követő listaoldalra.
c) Keresse meg a lejegyzett helyszámot (16) vagy a keresett alcsoport
nevét (19). Lapozzon a jobb oldali oszlopban feltüntetett számú (20)
oldalra.
A d) és e) elemek a i-6 oldalon levő ábrára (F) vonatkoznak.
d) Az alcsoport ábrán keresse meg a keresett alkatrészt (21), és jegyezze
le az alkatrész helyszámát.
e) Az alkatrészek száma (29) és leírása (30) a listaoldalon, a helyszám
mellett láthatóak.

Bevezetés i Introduction
A Cserelkatrész katalógusban közölt adatok

Az alábbi lista a i-6 oldalon található ábrára (F) vonatkozik. A
Cserealkatrészek katalógus a következő, csoportokra, alcsoportokra
és cserealkatrészkere vonatkozó, adatokat tartalmazza:
• Csoportstruktúra hivatkozás (22). A berendezés listás struktúrájában
közvetlenül az aktuális csoport fölött álló csoportot jelöli.
• Csoportnév (23)
• Mértékegység (25)
• Menniség (26)
• Szerelvény tervrajza (27)
• Lista oldaltartománya (28). Abban az esetben jelenik meg, ha a csoport
ábrája vagy listája többoldalas.
• Alkatrész vagy alcsoport száma (29)
• Alcsoport neve vagy alkatrész leírása (30)
• Csoportszám (31)
• Berendezésszám (32)
• Csoportinformáció fejléc (33). Azt mutatja, hogy a fejléc után
következő rész egy bizonyos gépváltozatra vonatkozik vagy az
általános cserealkatrészek listája. Ha a listának több változata
van, és mindegyikhez más szerelvény-tervrajz tartozik, az illető
szerelvény-tervrajz oldalhivatkozása is megjelenik.
• Belső információ (34)

i Introduction Introduzione
Introduzione
Informazioni sul manuale
Tetra Pak consiglia di leggere con attenzione tutti i manuali forniti in
dotazione. Assicurarsi che tutti i manuali in dotazione siano disponibili per il
personale addetto al funzionamento e alla manutenzione della macchina.
È importante conservare il presente catalogo per tutta la durata della
macchina e consegnarlo al successivo proprietario o utilizzatore.
Tetra Pak non sarà da ritenersi responsabile per eventuali danni alla
macchina causati dal mancato rispetto delle istruzioni fornite nei manuali che
accompagnano le macchine.
Manuali in dotazione
I manuali consegnati con la presente macchina possono comprendere:
• Manuale di Conversione (CM)
Questo manuale fornisce ai tecnici le informazioni necessarie per la
conversione della macchina da una modalità di produzione a un'altra.
• Manuale Elettrico (EM)
Questo manuale fornisce ai tecnici informazioni sull’impianto elettrico
della macchina.
• Manuale di Installazione (IM)
Questo manuale fornisce ai tecnici le informazioni necessarie per
installare in sicurezza la macchina.
• Manuale di Manutenzione (MM)
Questo manuale fornisce ai tecnici le informazioni necessarie per la
manutenzione della macchina.
• Manuale Operativo (OM)
Questo manuale fornisce all’operatore le informazioni sull’utilizzo e il
funzionamento della macchina prima, durante e dopo la produzione.
• Catalogo Pezzi di Ricambio (SPC)
Questo manuale fornisce le informazioni necessarie per ordinare a
Tetra Pak i pezzi di ricambio.
• Manuale Tecnico (TeM)
– fornisce ai tecnici le informazioni necessarie per installare in
sicurezza la macchina
– fornisce ai tecnici le informazioni necessarie per la manutenzione
della macchina
– fornisce ai tecnici informazioni sull’impianto elettrico della macchina
– fornisce le informazioni necessarie per ordinare a Tetra Pak i pezzi di
ricambio.

Introduzione i Introduction
Schema della pagina

Consultare la figura (A) a pagina i-5. Le pagine principali del Catalogo Pezzi
di Ricambio consistono in una pagina con la figura (1) e una pagina elenco
corrispondente (7). Il numero di pagina (5) è indicato nell'intestazione delle
pagine con le figure e nel piè di pagina delle pagine elenco. Il codice del
documento (6) è indicato nel piè di pagina delle pagine elenco.
Numerazione delle pagine
Consultare la figura (A) a pagina i-5. Il numero di pagina (5) è suddiviso in
tre parti:
• numero della sezione (2)
• numero progressivo di pagina all’interno della sezione (3)
• numero totale di pagine della sezione (4)
Introduzione alla macchina

Fabbricante
Il nome e l'indirizzo del fabbricante sono riportati sulla seconda pagina del
presente catalogo.
Assistenza
Per ordinare i pezzi di ricambio per questa macchina oppure per riferire
problemi associati con il funzionamento della macchina, contattare il più
vicino ufficio Tetra Pak.
Per tutte le altre richieste, commenti o suggerimenti per eventuali
miglioramenti da apportare alla macchina e alla relativa documentazione,
contattare il responsabile di collegamento.
Identificazione
Marchio CE
La macchina è conforme alle principali norme sanitarie e di sicurezza
dell'Area Economica Europea (EEA).

i Introduction Introduzione
Targhetta della macchina

La figura (B) a pagina i-5 illustra un esempio di targhetta della macchina.
La sezione Introduzione di tutti i manuali consegnati con la presente
macchina contiene invece la figura della targhetta della macchina valida e
l'illustrazione della sua posizione sulla macchina. La targhetta riporta i dati
elencati sotto che sono necessari per contattare Tetra Pak in relazione a
questa macchina specifica.
• Tipo di macchina (8)
• Volume (9)
• Specifiche disegno (10)
• Numero di matricola della macchina (11)
• Fabbricante (12)
• Marchio CE (13)
• Anno di fabbricazione (14)
La figura (C) a pagina i-5 mostra un esempio delle specifiche di una

macchina. Verificare che i dati relativi alla macchina elencati nelle pagine
iniziali del manuale corrispondano ai dati riportati sulla targhetta della
macchina e nelle specifiche della macchina.
Come usare questo Catalogo Pezzi di Ricambio

Individuare il numero del pezzo di ricambio
f) Vedere la figura (D) a pagina i-5. Andare al numero della sezione (15)
indicato accanto al gruppo principale che contiene il pezzo che si
desidera individuare.
I punti b) e c) fanno riferimento alla figura (E) a pagina i-6.

g) Nella figura del gruppo principale, identificare il sottogruppo della
macchina (17) che contiene il pezzo o il sottogruppo cercato. Annotare il
numero di posizione (18) e andare alla pagina elenco che segue la
figura.
h) Identificare il numero di posizione (16) o il nome del sottogruppo (19).
Andare al numero di pagina corrispondente (20) indicato nella colonna
di destra.
I punti d) e e) fanno riferimento alla figura (F) a pagina i-6.
i) Individuare il pezzo (21) cercato sulla figura del sottogruppo e annotare
il numero di posizione del pezzo.
j) Il numero del pezzo (29) e la descrizione del pezzo (30) sono indicati
accanto al numero di posizione sulla pagina elenco.

Introduzione i Introduction
Informazioni contenute nel Catalogo Pezzi di Ricambio

L'elenco seguente fa riferimento alla figura (F) a pagina i-6. Il Catalogo
Pezzi di Ricambio contiene le seguenti informazioni sui gruppi, i sottogruppi
e i pezzi di ricambio della macchina:
• Riferimento struttura gruppo (22). Indica il gruppo superiore più
prossimo nella struttura elenco della macchina.
• Nome gruppo (23)
• Unità di misura (25)
• Quantità (26)
• Numero disegno di assemblaggio (27)
• Pagine dell'elenco (28). Questa informazione è presente se la figura o
l'elenco relativi al gruppo occupano più di una pagina del manuale.
• Numero pezzo o sottogruppo (29)
• Nome sottogruppo o descrizione pezzo (30)
• Numero gruppo (31)
• Numero macchina (32)
• Titolo informazioni gruppo (33). Indica se la sezione che segue il titolo
si riferisce a una variante di macchina specifica oppure se si tratta di un
elenco di parti comuni. Se un elenco contiene più di una variante ed
esiste un disegno di assemblaggio specifico per ogni variante, viene
fornito il riferimento alla pagina in cui è riportato il disegno di
assemblaggio relativo alla variante.
• Informazioni interne (34)

i Introduction Įvadas
Įvadas
Žinyno informacija
Tetra Pak rekomenduoja atidžiai perskaityti visus pateikiamus žinynus.
Užtikrinkite, kad pateikti žinynai būtų prieinami darbuotojams, kurie
naudoja ar aptarnauja įrangą.
Svarbu išsaugoti šį katalogą visą įrangos naudojimo laiką ir perduoti jį
vėlesniems savininkams ar naudotojams.
Tetra Pak neprisiima atsakomybės už bet kokius pažeidimus įrangai, kuriuos
sukels nurodymų, pateikiamų žinynuose kartu su įranga, nesilaikymas.
Pateikiami žinynai
Žinynuose, pateikiamuose su šia įranga, gali būti:
• Konversijos žinynas (KŽ)
Šiame žinyne technikams pateikiama informacija apie įrangos
perjungimą skirtingais gamybiniais režimais.
• Elektros žinynas (EŽ)
Šiame žinyne technikams pateikiama informacija apie įrangos elektros
sistemą.
• Montavimo žinynas (MŽ)
Šiame žinyne technikams pateikiama informacija, reikalinga saugiam
įrangos sumontavimui.
• Aptarnavimo žinynas (AŽ)
Šiame žinyne technikams pateikiama informacija apie įrangos
aptarnavimą.
• Naudotojo žinynas (NŽ)
Šiame žinyne operatoriui pateikiama informacija apie įrangos priežiūrą
ir naudojimą prieš gamybos procesą, jo metu ir po jo.
• Atsarginių detalių katalogas (ADK)
Šiame žinyne pateikiama informacija, reikalinga norint užsakyti
atsargines detales iš Tetra Pak.
• Techninis žinynas (TeŽ)
– pateikia technikams informaciją, reikalingą saugiam įrangos
sumontavimui
– pateikia technikams informaciją, reikalingą įrangos aptarnavimui
– pateikiama technikams informacija apie įrangos elektros sistemą
– pateikiama informacija, kaip užsakyti atsargines detales iš Tetra Pak

Įvadas i Introduction
Puslapio išdėstymas
Remkitės iliustracija (A) puslapyje i-5: Pagrindiniai atsarginių detalių
katalogo puslapiai yra sudaryti iš iliustracijos puslapio (1) ir jį atitinkančio
sąrašo puslapio (7). Puslapio numeris (5) parodytas iliustracijos puslapio
viršutinėje paraštėje ir sąrašo puslapio apatinėje paraštėje. Dokumento
numeris (6) yra parodytas apatinėje sąrašo puslapio paraštėje.
Puslapių numeravimas
Vadovaukitės iliustracija (A) puslapyje i-5: A puslapio numeris (5) turi tris
dalis:
• skyriaus numerį (2)
• puslapio eilės numerį skyriuje (3)
• bendrą puslapių skaičių skyriuje (4)
Mašinos pristatymas
Gamintojas
Gamintojo pavadinimą ir adresą galite rasti šio katalogo antrajame puslapyje.
Aptarnavimas
Norėdami užsakyti atsargines detales šiai mašinai arba pranešti apie
nesklandumus, susijusius su šios mašinos naudojimu, susisiekite su
artimiausiu Tetra Pak biuru.
Susisiekite su Liaison dėl kitų komentarų, klausimų ar pasiūlymų, kaip
patobulinti įrangą ar jos dokumentaciją.
Identifikacija
CE Klasifikacija
Ši įranga atitinka Europos ekonominės erdvės (EEE) pirminius sveikatos ir
saugumo normatyvus.

i Introduction Įvadas
Mašinos plokštelė
Iliustracijoje (B) puslapyje i-5 parodytas mašinos plokštelės pavyzdys.
Mašinos specifikacijos plokštelės iliustracija ir jos vieta prie įrangos
parodyta įžanginiame žinynų, pateikiamų su šia įranga, skyriuje. Mašinos
plokštelėje yra žemiau išvardinti duomenys, reikalingi kreipiantis į Tetra Pak
su šia konkrečia įranga susijusiais klausimais:
• mašinos tipas (8)
• tomas (9)
• brėžinių specifikacijos (10)
• mašinos serijos numeris (11)
• gamintojas (12)
• CE ženklas (13)
• pagaminimo metai (14)
Iliustracija (C) puslapyje i-5 vaizduoja mašinos specifikacijos pavyzdį.

Įsitikinkite, kad įrangos duomenys, išdėstyti šio žinyno pirmuosiuose
puslapiuose, atitinka duomenis mašinos plokštelėje ir mašinos specifikaciją.
Kaip naudotis šiuo atsarginių detalių katalogu?

Atsarginės detalės numerio nustatymas
a) Remkitės iliustracija (D) puslapyje i-5: eikite į skyrių Nr. (15), nurodytą
šalia pagrindinės grupės, kurioje yra jūsų ieškoma detalė.
Elementai b) ir c) nurodo iliustraciją (E) puslapyje i-6.

b) Pagrindinės grupės iliustracijoje suraskite mašinos pogrupį (17),
kuriame yra jūsų ieškoma detalė. Įsidėmėkite pozicijos numerį ir
pereikite į sąrašo puslapį, kuris atitinka iliustraciją.
c) Ieškokite pozicijos numerio (16) arba pogrupio pavadinimo (19).
Pereikite į atitinkamo numerio puslapį (20), kuris nurodytas dešiniajame
stulpelyje.
Elementai d) ir e) nurodo iliustraciją (F) puslapyje i-6.
d) Raskite ieškomą detalę (21) pogrupio iliustracijoje ir įsidėmėkite detalės
pozicijos numerį.
e) Detalės numeris (29) ir detalės aprašymas (30) pateikiami šalia
pozicijos numerio sąrašo puslapyje.

Įvadas i Introduction
Informacija, pateikiama atsarginių detalių kataloge

Žemiau pateikiamas sąrašas nurodo iliustraciją (F) puslapyje i-6. Atsarginių
detalių kataloge yra tokia informacija apie grupes, pogrupius ir atsargines
detales įrangai:
• Grupės struktūros nuorodos (22). Nurodo tolimesnę aukštesnę grupę
įrangos sąrašo struktūroje.
• Grupės pavadinimas (23) .
• Mato vienetas (25)
• Kiekis (26)
• Surinkimo brėžinio numeris (27)
• Sąrašo puslapio diapazonas (28). Įtrauktas, jei egzistuoja daug puslapių
grupės iliustracijoje arba sąraše.
• Detalės arba pogrupio numeris (29)
• Pogrupio pavadinimas ar detalės aprašymas (30)
• Grupės numeris (31)
• Įrangos numeris (32)
• Grupės informacinė antraštė (33). Nurodo, ar žemiau antraštės esantis
skyrius yra skirtas specifiniam mašinos variantui, ar tai yra įprastinių
detalių sąrašas. Jei sąrašas turi daugiau nei vieną variantą ir kiekvienas
variantas iliustruojamas surinkimo brėžiniu, pateikiama nuoroda į
surinkimo brėžinio puslapį.
• Vidinė informacija (34)

i Introduction Ievads
Ievads
Informācija par rokasgrāmatu
Tetra Pak iesaka rūpīgi izlasīt visas piegādātās rokasgrāmatas. Piegādātajām
rokasgrāmatām ir jābūt pieejamām personālam, kas apkalpo iekārtas vai veic
to apkopi.
Nepieciešams saglabāt šo katalogu visu laiku, kamēr iekārtas tiek
izmantotas, un nodot katalogu nākamajam īpašniekam vai lietotājam.
Tetra Pak neatbild par iekārtas bojājumiem, kuri rodas līdz ar iekārtu
piegādāto instrukciju neievērošanas rezultātā.
Piegādātās rokasgrāmatas
Līdz ar iekārtu var tikt piegādātas šādas rokasgrāmatas
• Pārslēgšanas rokasgrāmata (CM)
Šī rokasgrāmata sniedz tehniķiem informāciju par iekārtas pārslēgšanu
dažādos atšķirīgos ražošanas režīmos.
• Elektriskās instalācijas rokasgrāmata (EM)
Šī rokasgrāmata sniedz tehniķiem informāciju par iekārtas elektriskās
instalācijas sistēmu.
• Uzstādīšanas rokasgrāmata (IM)
Šī rokasgrāmata sniedz tehniķiem informāciju, kas nepieciešama drošai
iekārtas uzstādīšanai.
• Apkopes rokasgrāmata (MM)
Šī rokasgrāmata sniedz tehniķiem informāciju par iekārtas apkopi.
• Ekspluatācijas rokasgrāmata (OM)
Šī rokasgrāmata sniedz apkalpojošajam personālam informāciju par
iekārtas apkalpošanu un ekspluatēšanu pirms darba sākuma, darba
laikā un pēc darba beigām.
• Rezerves daļu katalogs (SPC)
Šī rokasgrāmata sniedz informāciju, kas nepieciešama, lai pasūtītu
rezerves daļas no Tetra Pak.
• Tehniskā rokasgrāmata (TeM)
– sniedz tehniķiem informāciju, kas nepieciešama drošai iekārtas
uzstādīšanai
– sniedz tehniķiem informāciju par iekārtas apkopi
– sniedz tehniķiem informāciju par iekārtas elektrisko instalāciju
– sniedz informāciju, kas nepieciešama, lai pasūtītu rezerves daļas
no Tetra Pak

Ievads i Introduction
Lappuses izkārtojums
Skatīt ilustrāciju (A) i-5 lappusē: Galvenās lappuses Rezerves daļu katalogā
sastāv no ilustrāciju lapas (1) un atbilstīgās saraksta lapas (7). Lappuses
numurs (5) ir norādīts ilustrācijas lapas galvenē un saraksta lapas kājenē.
Dokumenta numurs (6) ir norādīts saraksta lapas kājenē.
Lappušu numerācija
Skatīt ilustrāciju (A) lappusē i-5: Lappuses numurs (5) sastāv no trim daļām:
• nodaļas numura (2)
• secīga lappuses numura nodaļas ietvaros (3)
• kopējā lappušu skaita nodaļā (4)
Iepazīstināšana ar iekārtu
Ražotājs
Ražotāja nosaukumu un adresi skatīt šī kataloga otrajā lappusē.
Serviss
Ja nepieciešams pasūtīt rezerves daļas šai mašīnai vai ziņot par problēmām,
kas saistītas ar mašīnas ekspluatāciju, tad, lūdzu, sazinieties ar tuvāko
Tetra Pak pārstāvniecību.
Ja Jums ir citi jautājumi, piezīmes vai ieteikumi par iekārtas un tās
dokumentācijas uzlabošanu, tad lūdzam sazināties ar Sakaru biroju.
Identifikācija
CE klasifikācija
Šī iekārta atbilst galvenajām Eiropas Ekonomiskās Zonas (EEA) regulām,
kuras attiecas uz veselību un drošību.

i Introduction Ievads
Mašīnas tipa plāksnīte

Ilustrācijā (B) i-5lappusē redzams mašīnas tipa plāksnītes paraugs.
Aktuālās mašīnas tipa plāksnīte un tās atrašanās vieta uz iekārtas ir parādīta
līdz ar šo iekārtu piegādāto rokasgrāmatu Ievada nodaļā. Mašīnas tipa
plāksnīte satur tālāk uzskaitīto informāciju, kura ir nepieciešama, sazinoties
ar Tetra Pak par šo iekārtu.
• Mašīnas tips (8)
• Daudzums (9)
• Rasējuma specifikācijas (10)
• Mašīnas sērijas numurs (11)
• Ražotājs (12)
• CE apzīmējums (13)
• Izgatavošanas gads (14)
Ilustrācijā (C) i-5lappusē ir parādīts mašīnas specifikācijas paraugs.

Pārliecinieties, ka šīs rokasgrāmatas titullapās minētā informācija par iekārtu
atbilst tai, kas norādīta uz mašīnas tipa plāksnītes un mašīnas specifikācijā.
Rezerves daļu kataloga lietošana

Vajadzīgās rezerves daļas numura atrašana
a) Skatiet ilustrāciju (D) i-5lappusē: atrodiet nodaļas numuru (15), kas
norādīts līdzās galvenajai grupai, kurā ietilpst Jūsu meklētā rezerves
daļa.
Pozīcijas b) un c) skatiet ilustrāciju (E) i-6lappusē.

b) Galvenās grupas ilustrācijā atrodiet mašīnas apakšgrupu (17), kurā
ietilpst Jūsu meklētā detaļa vai apakšgrupa. Atzīmējiet pozīcijas
numuru (18) un pievērsieties saraksta lappusei, kura seko šai ilustrācijai.
c) Sameklējiet atbilstīgo pozīcijas numuru (16) vai apakšgrupas
nosaukumu (19). Pievērsieties atbilstīgajam lappuses numuram (20),
kas norādīts ailē pa labi.
Pozīcijas d) un e) skatiet ilustrāciju (E) i-6lappusē.
d) Atrodiet vajadzīgo rezerves daļu (21) apakšgrupas ilustrācijā
un atzīmējiet šīs detaļas pozīcijas numuru.
e) Šīs daļas numurs (29) un apraksts (30) atrodas saraksta lapā
līdzās pozīcijas numuram.

Ievads i Introduction
Rezerves daļu katalogā sniegtā informācija

Šis saraksts attiecas uz ilustrāciju (F) i-6lappusē. Rezerves daļu katalogs
satur šādu informāciju par grupām, apakšgrupām un iekārtas rezerves daļām:
• Norādes par grupu struktūru (22). Norāde uz tuvāko augstāko grupu
iekārtas saraksta struktūrā.
• Grupas nosaukums (23)
• Mērvienība (25)
• Skaits (26)
• Montāžas rasējuma numurs (27)
• Saraksta lappuses zona (28). Tiek izmantota tad, ja grupas ilustrācija vai
saraksts ir uz vairākām lappusēm.
• Daļas vai apakšgrupas numurs (29)
• Apakšgrupas nosaukums vai daļas apraksts (30)
• Grupas numurs (31)
• Iekārtas numurs (32)
• Grupas informācijas iedaļas apzīmējums (33). Norāda, vai iedaļa zem šī
apzīmējuma attiecas uz noteiktu mašīnas variantu, vai arī tas ir kopējo
rezerves daļu saraksts. Ja sarakstam ir vairāk par vienu variantu un
katram variantam ir savs montāžas rasējums, tad tiek dota atsauce uz
lappusi, kur atrodams katra varianta montāžas rasējums.
• Iekšējā informācija (34)

i Introduction Introduzzjoni
Introduzzjoni
Informazzjoni tal-Manwal
Tetra Pak tirrakkomanda li jinqraw bl-attenzjoni l-manwali kkunsinnati
kollha. Aääerta ruöek li l-manwali kkunsinnati kollha huma disponibbli
göall-personàl li jöaddem jew li jagömel manutezjoni fuq it-tagömir.
Huwa importanti li üüomm dan il-katalgu sakemm idum jaödem it-tagömir,
u li tgöaddi l-katalgu lil xi sid jew lil xi persuna oöra li tuüa dan it-tagömir
fil-futur.
Tetra Pak ma tistax tinüamm responsabbli ta’ xi ösara lit-tagömir ikkawüata
minn nuqqas ta’ osservanza ta’ l-istruzzjonijiet li jingöataw f’dan il-manwal.
Manwali Kkunsinnati
Il-manwali kkunsinnati ma’ dan it-tagömir jinkludu
• Manwal tal-Konverüjoni (CM)
Dan il-manwal jipprovdi informazzjoni lit-tekniäi dwar il-konverüjoni
tat-tagömir bejn modi differenti tal-produzzjoni.
• Manwal Elettriku (EM)
Dan il-manwal jipprovdi informazzjoni lit-tekniäi dwar is-sistema
ta’ l-elettriku tat-tagömir.
• Manwal ta’ l-Installazzjoni (IM)
Dan il-manwal jipprovdi lit-tekniäi b’informazzjoni meötieëa biex
jinstallaw it-tagömir mingöajr periklu.
• Manwal tal-Manutenzjoni (MM)
Dan il-manwal jipprovdi lit-tekniäi b’informazzjoni fuq kif jagömlu
manutenzjoni fuq it-tagömir.
• Manwal ta’ l-Operazzjoni (OM)
Dan il-manwal jipprovdi informazzjoni lill-operatur fuq kif jimmaniëëja
u jöaddem it-tagömir, qabel, waqt, u wara l-produzzjoni.
• Katalgu tal-Partijiet Göat-Tibdil (SPC)
Dan il-manwal jipprovdi l-informazzjoni neäessarja biex jiëu ordnati
partijiet göat-tibdil mingöand Tetra Pak.
• Manwal Tekniku (TeM)
– jipprovdi lit-tekniäi b’informazzjoni meötieëa biex jinstallaw
it-tagömir mingöajr periklu
– jipprovdi lit-tekniäi b’informazzjoni fuq kif jagömlu manutenzjoni
fuq it-tagömir
– jipprovdi informazzjoni lit-tekniäi dwar is-sistema ta’ l-elettriku
tat-tagömir.
– jipprovdi l-informazzjoni neäessarja biex jiëu ordnati partijiet
göat-tibdil mingöand Tetra Pak

Introduzzjoni i Introduction
Taqsim tal-Paëna
Irreferi göal stampa (A) f’paëna i-5: Il-paëni ewlenin fil-Katalgu tal-Partijiet
Göat-Tibdil jikkonsistu f’paëna bl-istampi (1) u paëna b’lista li
tikkorrispondi (7). In-numru tal-paëna (5) jintwera fil-header ta’ paëna
bl-istampi u fil-footer ta’ paëna b’lista. In-numru tad-dokument (6) jintwera
fil-footer ta’ paëna b’lista.
Numru tal-paëna
Irreferi göal stampa (A) f’paëna i-5: In-numru tal-paëna (5) fih tliet partijiet:
• numru tal-kapitlu (2)
• in-numru konsekuttiv tal-paëna fil-kapitlu (3)
• in-numru totali ta’ paëni fil-kapitlu (4)
Introduzzjoni tal-Magna
Manifattur
Göall-isem u l-indirizz tal-manifattur, ara t-tieni paëna ta’ dan il-katalgu.
Servizz
Biex tordna partijiet göat-tibdil göal din il-magna, jew biex tirrapporta
problemi assoäjati mat-töaddim ta’ din il-magna, ikkuntattja l-eqreb uffiääju
ta’ Tetra Pak.
Ikkuntattja lill-persuna responsabbli mill-komunikazzjoni jekk ikollok xi
mistoqsijiet, kummenti, jew suëëerimenti oörajn biex ittejjeb it-tagömir
u d-dokumentazzjoni tiegöu.
Identifikazzjoni
Klassifikazzjoni CE
Dan it-tagömir huwa konformi mar-regolamenti baüiäi tas-saööa u s-sigurtà
tal- European Economic Area (EEA).

i Introduction Introduzzjoni
Pjanäa tal-Magna
L-istampa (B) fuq paëna i-5 turi eüempju ta’ pjanäa tal-magna.
Stampa tal-pjanäa valida tal-magna u l-lok tagöha fuq it-tagömir hi murija
fil-kapitlu ta’ l-Introduzzjoni tal-manwali kkunsinnati ma’ dan it-tagömir.
Il-pjanäa tat-tagömir fiha l-informazzjoni elenkata hawn taöt, meötieëa meta
tikkuntattja lil Tetra Pak dwar dan it-tagömir partikulari.
• Tip ta’ magna (8)
• Volum (9)
• Speäifikazzjonijiet tad-Disinn (10)
• Numru tas-serje tal-magna (11)
• Manifattur (12)
• Marka CE (13)
• Sena tal-manifattura (14)
L-istampa (Ä) fuq paëna i-5 turi eüempju ta’ speäifikazzjoni tal-magna.
Aääerta ruöek li l-informazzjoni tat-tagömir elenkata fuq il-paëni
ta’ quddiem ta’ dan il-manwal tikkorrispondi göall-informazzjoni tal-pjanäa
tal-magna u l-ispeäifikazzjoni tal-magna.
Kif Tuüa Dan il-Katalgu tal-Partijiet Göat-Tibdil

Sib Numru ta’ Parti Göat-Tibdil
a) Irreferi göal stampa (D) f’paëna i-5: Mur fin-numru tal-kapitlu (15)
indikat ödejn il-grupp prinäipali li fih il-parti li trid issib.
Oëëetti b) u c) irreferi göal stampa (E) f’paëna i-6.

b) Fl-istampa tal-grupp prinäipali, fittex göas-sottogrupp tal-magna (17)
li fih il-parti jew sottogrupp li tkun qed tfittex. Innota n-numru
tal-poüizzjoni (18) u mur fil-paëna bil-lista li ssegwi l-istampa.
c) Fittex in-numru tal-poüizzjoni (16) jew l-isem tas-sottogrupp (19).
Mur fin-numru tal-paëna li jikkorrispondi (20) elenkat fil-kolonna
tan-naöa tal-lemin.
Oëëetti d) u e) irreferi göal stampa (F) f’paëna i-6.
d) Sib il-parti (21) li qed tfittex fl-istampa tas-sottogrupp u nnota n-numru
tal-poüizzjoni tal-parti.
e) In-numru tal-parti (29) u d-deskrizzjoni tal-parti (30) huma elenkati
ödejn n-numru tal-poüizzjoni fuq il-paëna bil-lista.

Introduzzjoni i Introduction
Informazzjoni Elenkata fil-Katalgu tal-Partijiet Göat-Tibdil

Il-lista t’hawn taöt tirreferi göal stampa (F) fuq paëna i-6. Il-Katalgu
tal-Partijiet Göat-Tibdil fih din l-informazzjoni li ëejja dwar gruppi,
sottogruppi, u partijiet göat-tibdil göat-tagömir:
• Referenza ta’ l-istruttura tal-grupp (22). Tindika l-ogöla grupp li jmiss
fl-istruttura tal-lista tat-tagömir.
• Isem tal-grupp . (23)
• Unit tal-kejl (25)
• Kwantità (26)
• Numru tad-disinn ta’ l-immuntar (27)
• Medda tal-paëni tal-lista (28). Inkluüi jekk hemm paëni multipli fil-lista
jew fl-istampa tal-grupp.
• Numru tal-parti jew sottogrupp (29)
• Deskrizzjoni ta’ l-isem tas-sottogrupp jew parti (30)
• Numru tal-grupp (31)
• Numru tat-tagömir (32)
• Heading ta’ l-informazzjoni tal-grupp (33). Tindika jekk is-sezzjoni
ta’ taöt il-heading hix göal xi varjant speäifiku tal-magna jew jekk hix
lista ta’ partijiet komuni. Jekk lista jkun fiha aktar minn varjant wieöed u
jekk kull varjant ikollu d-disinn ta’ l-immuntar tiegöu, tintwera referenza
ta’ paëna göad-disinn ta’ l-immuntar tal-varjant.
• Informazzjoni interna (34)

i Introduction Inleiding
Inleiding
Informatie betreffende dit handboek
Tetra Pak raadt aan alle geleverde documentatie zorgvuldig te lezen. Ga na of
de geleverde documentatie ter beschikking is van het personeel dat de
machine moet bedienen of servicewerkzaamheden moet uitvoeren.
Het is belangrijk deze catalogus voor de duur van de machine te bewaren en
de catalogus door te geven aan elke volgende eigenaar of gebruiker.
Tetra Pak aanvaardt geen verantwoordelijkheid voor om het even welke
soort beschadiging aan de machine als gevolg van het niet opvolgen van de
in dit handboek gegeven instructies.
Bijgeleverde handboeken
De met deze apparatuur geleverde handboeken omvatten
• Conversiehandboek (CM)
Dit handboek geeft technici informatie over het ombouwen van de
apparatuur tussen verschillende productiemodi.
• Handboek Elektriciteit (EM)
Dit handboek geeft elektriciens en servicetechnici informatie betreffende
het elektrisch systeem van de apparatuur.
• Installatiehandboek (IM)
Dit handboek geeft installatiepersoneel informatie om op veilige wijze
de apparatuur te installeren.
• Onderhoudshandboek (MM)
Dit handboek geeft technici informatie over het onderhoud van de
apparatuur.
• Bedieningshandboek (OM)
Dit handboek geeft de operator informatie betreffende het omgaan met
en bedienen van de apparatuur, voor, tijdens en na productie.
• Catalogus reservedelen (SPC).
Dit handboek geeft de nodige informatie om reserveonderdelen bij
Tetra Pak te bestellen.
• Technisch Handboek (TeM)
– Dit handboek geeft technici informatie, nodig om op veilige wijze de
apparatuur te installeren
– Dit handboek geeft technici informatie over het onderhoud van de
apparatuur
– Dit handboek geeft technici informatie betreffende het elektrisch
systeem van de apparatuur
– geeft de nodige informatie, nodig om reserveonderdelen bij Tetra Pak
te bestellen

Inleiding i Introduction
Pagina lay-out
Refereer naar de illustratie (A) op bladzijde i-5: De belangrijkste bladzijden
van een Catalogus Reserveonderdelen bestaan uit een bladzijde met een
illustratie (1) en een corresponderende bladzijde met een lijst (7).
Het bladzijdenummer (5) is te vinden in de kop van een illustratiebladzijde
en in de voetnoot van de lijstbladzijde. Het documentnummer (6) is te vinden
in de voetnoot van een lijstbladzijde.
Bladzijdenummering
Refereer naar de illustratie (A) op bladzijde i-5: een bladzijdenummer (5)
bestaat uit drie delen:
• hoofdstuknummer (2)
• opeenvolgende bladzijdenummer in het hoofdstuk (3)
• totaal aantal bladzijden in het hoofdstuk (4)
Introductie van de machine

Fabrikant
Voor naam en adres van de fabrikant, zie de tweede bladzijde van deze
catalogus.
Service
Voor het bestellen van reserveonderdelen of om bedieningsproblemen van
deze machine te melden, contacteer de dichtst bijzijnde vestiging van
Tetra Pak.
Neem contact op met de contactpersoon voor andere informatie,
opmerkingen of suggesties ter verbetering van de machine en de
bijbehorende documentatie.
Identificatie
CE-classificatie
Deze apparatuur voldoet aan de basiseisen voor gezondheid en veiligheid
voor het Europese Economische Gebied (EEA).

i Introduction Inleiding
Machineplaatje
De illustratie (B) op bladzijde i-5 toont een voorbeeld van een
machineplaatje.
Een illustratie van het wettige machineplaatje en de plaatsing ervan wordt
getoond in het hoofdstuk Introductie van de handboeken, meegeleverd met
deze apparatuur. Het machineplaatje bevat onderstaande gegevens die nodig
zijn wanneer Tetra Pak moet worden gecontacteerd betreffende deze
apparatuur.
• Machinetype (8)
• Volume (9)
• Tekeningspecificaties (10)
• Serienummer machine (11)
• Fabrikant (12)
• CE-markering (13)
• Fabricagejaar (14)
De illustratie (C) op bladzijde i-5 toont een voorbeeld van een

machineplaatje. Controleer of de gegevens betreffende de apparatuur in de
voorste bladzijden van dit handboek overeenkomen met de gegevens op het
machineplaatje en de machinespecificaties.
Hoe dient deze catalogus reserveonderdelen te

worden gebruikt
Lokaliseren van een nummer van een reserveonderdeel
a) Refereer naar de illustratie (D) op bladzijde i-5: ga naar het
hoofdstuknummer (15), naast de hoofdgroep die het gewenste deel
bevat.
Items b) en c) refereer naar de illustratie (E) op bladzijde i-6.
b) Op de illustratie van de hoofdgroep, zoek de machinesub-groep (17) op
die het deel van de gewenste sub-groep bevat. Noteer het positienummer
(18) en ga naar de lijstbladzijde die op de illustratie volgt.
c) Op de illustratie van de hoofdgroep, zoek de machinesub-groep (17) op
die het deel van de gewenste sub-groep bevat. Noteer het positienummer
(18) en ga naar de lijstbladzijde die op de illustratie volgt.
Items d) en e) refereren naar de illustratie (F) op bladzijde i-6.
d) Lokaliseer het gewenste onderdeel (21) in de illustratie van de sub-groep
en noteer het positienummer van het onderdeel.
e) Het onderdeelnummer (29) en de beschrijving ervan (30) worden naast
het positienummer op de lijstbladzijde weergegeven.

Inleiding i Introduction
Informatie die in een Catalogus reserveonderdelen wordt

gegeven
Onderstaande lijst verwijst naar de illustratie (F) op bladzijde i-6.
Een Catalogus reserveonderdelen bevat de volgende informatie betreffende
groepen, sub-groepen en reserveonderdelen voor de apparatuur:
• Referentie groepsstructuur (22). Geeft de volgende hoogste groep in de
structuur van de apparatuur aan.
• Groepsnaam(23) .
• Meeteenheid (25)
• Hoeveelheid (26)
• Tekeningnummer montage (27)
• Lijst met bladzijdenreeks (28). Inclusief indien er meerdere bladzijden in
de groepsillustratie of lijst voorkomen.
• Onderdeel of sub-groepsnummer (29)
• Naam sub-groep of beschrijving onderdeel (30)
• Groepsnummer (31)
• Apparatuurnummer (32)
• Titel groepsinformatie (33). Geeft aan of het deel onder de titel voor een
specifieke machine is, voor een variant of een lijst is met algemene
onderdelen. Indien een lijst meer dan één variant bevat en elke variant
heeft zijn eigen montagetekening, wordt een bladzijdenreferentie naar de
montagetekening van de variant gegeven.
• Interne informatie (34)

i Introduction Introduksjon
Introduksjon
Informasjon om håndboken
Tetra Pak anbefaler at du leser nøye gjennom alle leverte håndbøker. Sørg for
at håndbøkene er tilgjengelige for alle som betjener eller vedlikeholder utstyret.
Det er viktig at du tar vare på denne katalogen under hele levetiden til
utstyret og at du gir den videre til eventuelle nye eiere eller brukere.
Tetra Pak vil ikke være ansvarlig for skader på utstyret som oppstår fordi
brukeren ikke følger instruksjonene i håndbøkene som følger med utstyret.
Leverte håndbøker
Håndbøkene som leveres med dette utstyret, kan inkludere
Denne håndboken gir teknikere informasjon om hvordan de konverterer
utstyret mellom ulike produksjonsmodi.
• Electrisk manual (EM)
Denne håndboken gir teknikere informasjon om utstyrets elektriske
system.
• Installasjonsmanual (IM)
Denne håndboken gir teknikere informasjon som kreves for å kunne
installere utstyret på en sikker måte.
• Vedlikeholdsmanual (MM)
Denne håndboken gir teknikere informasjon om vedlikehold av utstyret.
• Driftsmanual (OM)
Denne håndboken gir operatøren informasjon om hvordan han håndterer
og bruker utstyret før, under og etter produksjon.
• Reservedelskatalog (SPC)
Denne håndboken inneholder informasjon som du trenger for å bestille
reservedeler fra Tetra Pak.
– gir teknikere informasjon om sikker installasjon av utstyret
– gir teknikere informasjon om vedlikehold av utstyret
– gir teknikere informasjon om utstyrets elektriske system
– inneholder informasjon som du trenger for å bestille reservedeler
fra Tetra Pak

Introduksjon i Introduction
Sideoppsett
Se illustrasjonen (A) på side i-5: Hovedsidene i reservedelskatalogen består av
en illustrasjonsside (1) og en korresponderende listeside (7). Sidenummeret (5)
vises i toppteksten på illustrasjonssiden og i bunnteksten listesiden. Dokument-
nummeret (6) vises i bunnteksten på listesiden.
Sidenummerering
Se illustrasjonen (A) på side i-5: Et sidenummer (5) består av tre deler:
• kapittelnummer (2)
• etterfølgende sidenummer i kapitlet (3)
• det totale antall sider i kapitlet (4)
Introduksjon av maskinen
Produsent
Hvis du ønsker produsentens navn og adresse, kan du se side to i denne
katalogen.
Service
Når du skal bestille reservedeler til denne maskinen eller rapportere problemer
forbundet med driften av denne maskinen, må du kontakte ditt nærmeste
Tetra Pak-kontor.
Når det gjelder andre forespørsler, kommentarer eller forslag til forbedringer
av utstyret og dets dokumentasjon, kan du ta kontakt med din kontaktperson.
Identifisering
CE-klassifisering
Dette utstyret er i overensstemmelse med de grunnleggende helse- og sikkerhets-
forskriftene i Det europeiske økonomiske samarbeidsområdet (EØS).

i Introduction Introduksjon
Maskinplate
Illustrasjonen (B) på side i-5 viser et eksempel på en maskinplate. En illustrasjon
av en gyldig maskinplate og hvor denne er plassert på utstyret, er vist i
introduksjonskapitlet i håndbøkene som følger med dette utstyret. Maskin-
platen inneholder nedenstående data, som du trenger når du skal kontakte
Tetra Pak angående dette bestemte utstyret.
• Maskintype (8)
• Volum (9)
• Tegningsspesifikasjoner (10)
• Maskin-serienummer (11)
• Produsent (12)
• CE-merke (13)
• Produksjonsår (14)
Illustrasjonen (C) på side i-5 viser et eksempel på en maskinspesifikasjon.

Sørg for at utstyrsdataene som står oppført foran i denne håndboken sam-
svarer med dataene på maskinplaten og maskinspesifikasjonen.
Hvordan bruke denne reservedelskatalogen

Finn et reservedelsnummer
a) Se illustrasjonen (D) på side i-5: Gå til kapittelnummeret (15) som er
angitt ved siden av hovedgruppen som inneholder delen du vil finne.
Punkt b) og c) viser til illustrasjonen (E) på side i-6.

b) På hovedgruppeillustrasjonen ser du etter maskinundergruppen (17) som
inneholder delen eller undergruppen du ser etter. Merk deg posisjons-
nummeret (18), og gå til listesiden som kommer etter illustrasjonen.
c) Se etter posisjonsnummeret (16) eller undergruppenavnet (19). Gå til det
korresponderende sidenummeret (20) som står oppført i høyre kolonne.
Punkt d) og e) viser til illustrasjonen (F) på side i-6.
d) Finn delen (21) du ser etter på undergruppeillustrasjonen, og merk deg
delens posisjonsnummer.
e) Delenummeret (29) og delebeskrivelsen (30) finner du ved siden av
posisjonsnummeret på listesiden.

Introduksjon i Introduction
Informasjon i en reservedelskatalog
Listen nedenfor viser til illustrasjonen (F) på side i-6. En reservedelskatalog
inneholder følgende informasjon om grupper, undergrupper og reservedeler
for utstyret:
• Gruppeinndelingsreferanse (22). Angir den neste gruppen opp i inndelingen
av utstyrslisten.
• Gruppenavn (23) .
• Målenhet (25)
• Antall (26)
• Tegningsnummer (27)
• Listesideområde (28). Inkludert hvis det er flere sider i gruppeillustrasjonen
eller listen.
• Dele- eller undergruppenummer (29)
• Undergruppenavn eller delebeskrivelse (30)
• Gruppenummer (31)
• Utstyrsnummer (32)
• Gruppeinformasjonsoverskrift (33). Angir om avsnittet under overskriften
er for en bestemt maskinvariant eller om det er en liste over vanlige deler.
Hvis en liste har flere varianter og hver variant har sin egen sammenstillings-
tegning, vises det en sidereferanse til variantens sammenstillingstegning.
• Intern informasjon (34)

i Introduction Wprowadzenie
Wprowadzenie
Informacje o Instrukcji
Tetra Pak zaleca dokładne zapoznanie się ze wszystkimi dostarczonymi
instrukcjami obsługi. Upewnij się, że dostarczone instrukcje obsługi są
dostępne dla personelu obsługującego lub konserwującego wyposażenie.
Ważne jest, aby niniejszy katalog zachować na cały okres eksploatacji
urządzenia i przekazać go każdemu kolejnemu użytkownikowi/
właścicielowi.
Tetra Pak nie ponosi odpowiedzialności za żadne uszkodzenia urządzenia
spowodowane nieprzestrzeganiem zaleceń zawartych instrukcjach
dołączonych do tego urządzenia.
Dostarczone Instrukcje
Instrukcje dostarczone z tym urządzeniem zawierają
• Instrukcję Konwersji (CM)
Instrukcja ta dostarcza technikom informacje o sposobie konwersji
urządzenia pomiędzy różnymi trybami produkcji.
• Instrukcję Elektryki (EM)
Instrukcja ta dostarcza technikom informacje o układzie elektrycznym
urządzenia.
• Instrukcję Instalacyjną (IM)
Instrukcja ta dostarcza technikom informacje niezbędne do
bezpiecznego zainstalowania urządzenia.
• Instrukcję Konserwacji (MM)
Instrukcja ta dostarcza technikom informacje o sposobie konserwacji
urządzenia.
• Instrukcję Operacyjną (OM)
Instrukcja ta dostarcza operatorowi informacje o sposobie manipulacji i
obsługi urządzenia przed, podczas i po produkcji.
• Katalog Części Zamiennych (SPC)
Instrukcja ta dostarcza informacje niezbędne do zamawiania części
zamiennych z firmy Tetra Pak.
• Instrukcję Techniczną (TeM)
– dostarcza technikom informacje niezbędne do bezpiecznego
zainstalowania urządzenia
– dostarcza technikom informacje o konserwacji urządzenia
– dostarcza technikom informacje o układzie elektrycznym urządzenia
– dostarcza informacje niezbędne do zamawiania części zamiennych
z firmy Tetra Pak

Wprowadzenie i Introduction
Układ Strony
Patrz ilustracja (A) na stronie i-5: Kartki główne Katalogu Części
Zamiennych składają się z ze strony z ilustracją (1) oraz odpowiadającej jej
strony z listą (7). W nagłówku strony z ilustracją oraz w stopce strony z listą
pokazany jest numer strony (5). Numer dokumentu (6)umieszczony jest w
stopce strony z listą.
Numeracja stron
Patrz ilustracja (A) na stronie i-5:Numer strony (5) zawiera trzy części:
• numer rozdziału (2)
• kolejny numer strony (3) w ramach rozdziału
• łączna ilość stron (4) w rozdziale
Wprowadzenie do Maszyny
Producent
Nazwę i adres producenta można znaleźć na drugiej stronie niniejszego
katalogu.
Serwis
Aby zamówić części zapasowe do tej maszyny lub zgłosić problemy
związane z jej pracą należy skontaktować się z najbliższym biurem
Tetra Pak.
Prosimy o nawiązanie kontaktu w przypadku jakichkolwiek zapytań,
komentarzy, lub sugestii zmierzających do usprawnienia wyposażenia
oraz dokumentacji z nimi związanych.
Identyfikacja
Klasyfikacja CE
Urządzenie spełnia wymagania podstawowych przepisów BHP
Europejskiego Obszaru Ekonomicznego (EEA).

i Introduction Wprowadzenie
Płyta znamionowa maszyny

Ilustracja (B) przedstawiona na stronie i-5 pokazuje przykład płyty
znamionowej maszyny.
Ilustracja prawidłowej płyty znamionowej oraz jej położenie na urządzeniu
pokazana jest w rozdziale Wprowadzenie zawartym w instrukcjach
dostarczonych z tym urządzeniem. Płyta znamionowa maszyny zawiera niżej
przedstawione dane, potrzebne podczas kontaktowania się z firmą Tetra Pak
w sprawach dotyczących tego konkretnego urządzenia.
• Typ maszyny (8)
• Objętość (9)
• Specyfikacje rysunkowe (10)
• Numer seryjny urządzenia (11)
• Producent (12)
• Oznaczenie symbolemCE (13)
• Rok produkcji (14)
Ilustracja (C) zawarta na stronie i-5 pokazuje przykład specyfikacji maszyny.

Należy sprawdzić, czy dane wyposażenia przedstawione na pierwszej stronie
tej instrukcji odpowiadają danym zawartym na płycie znamionowej maszyny
oraz specyfikacji maszyny.
Jak Korzystać z niniejszego Katalogu Części

Zamiennych
Należy znaleźć Numer części zamiennej
a) Patrz ilustracja (D) zawarta na stronie i-5: Przejdź do numeru
rozdziału (15) pokazanego obok głównej grupy zawierającej część,
którą chcesz odszukać.
Pozycje b) i c) odnoszą się do ilustracji (E) zawartej na stronie i-6.

b) Na ilustracji grupy głównej odszukaj podgrupę maszyny (17), która
zawiera odpowiednią część lub podgrupę, której szukasz. Zanotuj numer
pozycji (18) i przejdź na stronę z listą, umieszczoną za ilustracją.
c) Odszukaj numer pozycji (16) lub nazwę podgrupy (19). Przejdź
do odpowiedniego numeru strony (20) pokazanego w kolumnie
umieszczonej po prawej stronie.
Pozycje d) i e) odnoszą się do ilustracji (F) zawartej na stronie i-6.
d) Znajdź na ilustracji podgrupy część (21), której szukasz i zanotuj
numer pozycji części.
e) Numer części (29) oraz opis części (30) są umieszczone na stronie z listą
obok numeru pozycji.

Wprowadzenie i Introduction
Informacje zawarte w Katalogu Części Zamiennych

Poniższa lista odnosi się do ilustracji (F) zawartej na stronie i-6. Katalog
Części Zamiennych zawiera następujące informacje o grupach, podgrupach
oraz częściach zamiennych dla urządzenia:
• Struktura referencji grup (22). Wskazuje następną wyższą grupę zawartą
w strukturze listy wyposażenia.
• Nazwa grupy. (23)
• Jednostka miary(25)
• Ilość (26)
• Numer rysunku montażowego (27)
• Zakres strony z listą (28). Zawarty w przypadku występowania wielu
stron dla ilustracji lub listy grupy.
• Numer części lub podgrupy (29)
• Nazwa podgrupy lub opis części (30)
• Numer grupy (31)
• Numer urządzenia (32)
• Nagłówek informacyjny grupy (33). Wskazuje, czy sekcja umieszczona
pod nagłówkiem dotyczy określonego wariantu maszyny, czy też jest to
lista wspólna dla wszystkich wariantów. Jeśli lista występuje w wielu
wariantach i dla każdego z nich dostępny jest własny rysunek
montażowy, pokazany jest numer strony odniesienia rysunku
montażowego dla danego wariantu.
• Informacje wewnętrzne (34)

i Introduction Introdução
Introdução
Informação do Manual
A Tetra Pak recomenda ler cuidadosamente todos os manuais fornecidos.
Verificar se os manuais fornecidos estão ao dispor do pessoal que trabalha
com o equipamento ou que faz a manutenção do mesmo.
É importante guardar este catálogo durante o tempo útil de vida da máquina
ou do equipamento e de entregar o catálogo a qualquer proprietário ou
utilizador subsequente.
A Tetra Pak não toma a responsabilidade por quaisquer danos no
equipamento causados devido ao facto de que as instruções dadas nos
manuais que acompanham este equipamento não foram seguidas.
Manuais fornecidos
Os manuais fornecidos com este equipamento incluem
• Manual de Conversão (CM)
Este manual fornece aos técnicos as informações sobre a conversão do
equipamento entre os diferentes modos de produção.
• Manual Eléctrico (EM)
Este manual fornece aos técnicos as informações sobre o sistema
eléctrico do equipamento.
• Manual de Instalação (IM)
Este manual fornece aos técnicos as informações necessárias para
instalar seguramente o equipamento.
• Manual de Manutenção (MM)
Este manual fornece aos técnicos as informações para a manutenção do
equipamento.
• Manual de Operação (OM)
Este manual fornece ao operador as informações que ele necessita para
manejar e accionar o equipamento antes, durante e depois da produção.
• Catálogo de Peças Sobressalentes (SPC)
Este manual fornece as informações necessárias para encomendar peças
sobressalentes à Tetra Pak.
• Manual Técnico (TeM)
– fornece aos técnicos as informações necessárias para instalar
seguramente o equipamento
– fornece aos técnicos as informações para a manutenção do
equipamento
– fornece aos técnicos as informações sobre o sistema eléctrico do
equipamento
– fornece as informações necessárias para encomendar peças
sobressalentes à Tetra Pak

Introdução i Introduction
Disposição da página
Referência à ilustração (A) na página i-5: As páginas principais num
Catálogo de Peças Sobressalentes consistem numa página ilustrada (1) e
numa página com a lista correspondente (7). O número da página (5) é
mostrado no cabeçalho de uma página ilustrada e no rodapé de uma página
com lista. O número do documento (6) é mostrado no rodapé de uma página
com lista.
Numeração da página
Referência à ilustração (A) na página i-5: Um número de página (5) tem três
partes:
• Número do capítulo (2)
• número consecutivo da página dentro do capítulo (3)
• número total de páginas no capítulo (4)
Introdução da máquina
Fabricante
Para o nome e morada do fabricante, ver a segunda página deste catálogo.
Assistência técnica
Para encomendar peças sobressalentes para esta máquina, ou para relatar
problemas associados com a operação desta máquina, contactar a companhia
Tetra Pak mais próxima.
Contactar a Liaison se tiver quaisquer questões, comentários ou sugestões
para o desenvolvimento relacionado com o equipamento e a sua
documentação.
Identificação
Classificação CE
Este equipamento está de acordo com os regulamentos de segurança e saúde
da Área Económica Europeia (EEA).

i Introduction Introdução
Placa da máquina
A ilustração (B) na página i-5 mostra um exemplo de uma placa da máquina.
Uma ilustração da placa da máquina válida e a sua localização no
equipamento é mostrada no capítulo Introdução dos manuais fornecidos com
este equipamento. A placa da máquina contem os dados alistados em baixo,
necessários quando se contactar a Tetra Pak relacionando-se a este
equipamento em específico.
• Tipo da máquina (8)
• Volume (9)
• Especificações dos desenhos (10)
• Número de série da máquina (11)
• Fabricante (12)
• Marca CE (13)
• Ano de construção (14)
A ilustração (C) na página i-5 mostra um exemplo de uma especificação da

máquina. Verificar se os dados do equipamento alistados nas páginas da
frente deste manual correspondem aos dados na placa da máquina e à
especificação da máquina.
Como usar este Catálogo de Peças

Sobressalentes
Localizar um Número da peça sobressalente
f) Referência à ilustração (D) na página i-5: Para o número do capítulo (15)
indicado ao lado do grupo principal que contem a peça que quer
localizar.
Pos. b) e c) referem-se à ilustração (E) na página i-6.

g) Na ilustração do grupo principal, procurar o subgrupo da máquina (17)
que contem a peça ou subgrupo que está à procura. Anotar o número da
posição (18) e passar para a página da lista que segue a ilustração.
h) Procurar o número da posição (16) ou o nome do subgrupo (19). Passar
para o número da página correspondente (20) alistado na coluna do lado
direito.
Pos. d) e e) referem-se à ilustração (F) na página i-6.
i) Localizar a peça (21) que está à procura na ilustração do subgrupo e
anotar o número da posição da peça.
j) O número da peça (29) e a descrição da peça (30) estão alistados ao lado
do número da posição na página da lista.

Introdução i Introduction
Informações indicadas num Catálogo de Peças

Sobressalentes
A lista em baixo refere-se à ilustração (F) na página i-6. Um Catálogo de
Peças Sobressalentes contem as seguintes informações sobre grupos,
subgrupos e peças sobressalentes para o equipamento:
• Referência da estrutura do grupo (22). Indica o grupo a seguir mais
elevado na estrutura da lista do equipamento.
• Nome do grupo . (23)
• Unidade de medição (25)
• Quantidade (26)
• Número do desenho de montagem (27)
• Gama da página de lista (28). Incluída se houver páginas múltiplas na
ilustração do grupo ou lista.
• Número da peça ou do subgrupo (29)
• Nome do subgrupo ou descrição da peça (30)
• Número do grupo (31)
• Número do equipamento (32)
• Título da informação do grupo (33). Indica se a secção abaixo do título é
para uma variante de máquina específica ou se é uma lista de peças
comuns. Se uma lista tiver mais do que uma variante e cada variante
tiver o seu próprio desenho de montagem, é mostrada uma referência
para a página do desenho de montagem da variante.
• Informação interna (34)

Úvod
Informácie o príručke
Tetra Pak doporučuje čítat’ pozorne všetky dodané príručky. Presvedčte sa,
že dodané príručky sú k dispozícii personálu, ktorý vykonáva obsluhu alebo
údržbu zariadenia.
Je dôležité ponechat’ si tento katalóg počas životnosti zariadenia a odovzdat’
katalóg inému majiteľovi alebo užívateľovi.
Tetra Pak nebude zodpovedat’ za nijaké zničenie zariadenia spôsobené
nedodržaním pokynov uvedených v príručke vzhľadom na toto zariadenie.
Dodané príručky
Príručky dodané s týmto zariadením majú obsahovat’
• Konverznú príručku (CM)
Táto príručka poskytuje technikom informácie o konvertovaní zariadenia
medzi rozličnými režimami výroby.
• Príručku elektriky (EM)
Táto príručka poskytujetechnikom informácie o zariadeniach elektrickej
inštalácie.
• Inštalačnú príručku (IM)
Táto príručka poskytuje technikom informácie, požadované pre
bezpečnú inštaláciu zariadenia.
• Údržbársku príručku (MM)
Táto príručka poskytujetechnikom informáciu o údržbe zariadenia.
• Návod k použitiu (OM)
Táto príručka poskytuje obsluhe informáciu o zaobchádzaní a obsluhe
zariadenia pred, počas a po výrobe.
• Katalóg náhradných dielov (SPC)
Táto príručka poskytuje informácie potrebné pre objednávku náhradných
dielov Tetra Pak.
• Technická príručka (TeM)
– poskytuje technikom informácie potrebné pre bezpečnú inštaláciu
zariadenia
– poskytuje technikom informácie o údržbe zariadenia
– poskytujetechnikom informácie o zariadení elektrickej inštalácie
– poskytuje informácie potrebné pre objednávku náhradných dielov
z Tetra Pak

Formát stránky
Odvoláva sa na zobrazenie (A) na stranei-5: Hlavné stránky v katalógu
náhradných dielov pozostávajú zo stránky zobrazenia (1) a stránky
príslušného zoznamu (7). Stránka číslo (5) ukazuje v hlavičke stránky
zobrazenie a v zápätí stránky zoznam. Číslo dokumentu (6) je zobrazené
v zápätí stránky zoznamu.
Číslo stránky
Odvoláva sa na zobrazenie (A) na stranei-5: Číslo stránky (5) má tri časti:
• číslo kapitoly (2)
• nasledujúce číslo stránky v rámci kapitoly (3)
• celkový počet strán v kapitole (4)
Úvod o stroji
Výrobca
Pre názov a adresu výrobcu, viď druhá strana tohoto katalógu.
Servis
Pre objednávku náhradných dielov pre tento stroj, alebo pre hlásenie
problémov spojených s obsluhou tohoto stroja, kontaktujte najbližšiu
pobočku spoločnosti Tetra Pak.
Kontaktujte styčnú osobu s inými žiadost’ami, poznámkami, alebo
zlepšovacími návrhmi týkajúcimi sa zariadenia a jeho dokumentácie.
Označenie
CE klasifikácia
Zariadenie spĺňa základné zdravotné a bezpečnostné predpisy
Európskeho hospodárskeho priestoru (EEA).

Prístrojová doska
Zobrazenie (B) na strane i-5 ukazuje príklad prístrojovej dosky.
Zobrazenie správnej prístrojovej dosky a jej umiestnenie na zariadení je
uvedené v kapitole Úvod príručky dodanej s týmto zariadením. Prístrojová
doska obsahuje dole zoznam údajov, potrebných ak kontaktujete spoločnost’
Tetra Pak ohľadom tohoto špeciálneho zariadenia.
• Typ stroja (8)
• Kapacita (9)
• Výkres špecifikácie (10)
• Sériové číslo stroja (11)
• Výrobca (12)
• značka CE (13)
• Rok výroby (14)
Zobrazenie (C) na strane i-5 ukazuje príklad špecifikácie stroja. Presvedčte

sa, či údaje zariadenia uvedené na prednej strane tejto príručky zodpovedajú
údajom prístrojovej dosky a špecifikácii stroja.
Ako používat’ tento katalóg náhradných dielov

Vyhľadajte číslo náhradného dielu
a) Odvoláva sa na zobrazenie (D) na strane i-5: Chodt’e na kapitolu
číslo (15) označenú při halvnej skupine, ktorá obsahuje diel, ktorý
chcete vyhľadat’.
Položky b) a c) sa odvolávajú na zobrazenie (E) na strane i-6

b) Na zobrazení hlavnej skupiny, hľadajte pre stroj podskupinu (17) ktorá
obsahuje diel alebo podskupinu, ktoré hľadáte. Zaznamenajte pozíciu
číslo (18) a choďte na stránku zoznamu, ktorá sleduje zobrazenie.
c) Hľadajte číslo položky (16) alebo názov podskupiny (19). Choďte na
zodpovedajúcu stránku číslo (20)uvedenú v stĺpci po pravej ruke.
Položky d) a e) sa odvolávajú na zobrazenie (F) na stranei-6
d) Vyhľadajte diel (21), ktorý hľadáte podľa zobrazenia podskupiny
a poznámky čísla položky dielu.
e) Číslo dielu (29) a popis dielu (30) sú uvedené pri čísle položky
na zozname stránok.

Informácie uvedené v katalógu náhradných dielov

Zoznam dole sa odvoláva na zobrazenie (F) na strane i-6 Katalóg
náhradných dielov obsahuje informácie o skupinách, podskupinách
a náhradných dieloch pre zariadenie:
• Odkaz na usporiadanie skupiny (22) Označuje nasledujúcu vyššiu
skupinu v štruktúre zoznamu zariadenia.
• Názov skupiny (23)
• Jednotka merania(25)
• Množstvo (26)
• Číslo výkresu montáže (27)
• Zoznam rozsahu stránok (28). Zahrnutý, ak sú to mnohonásobné stránky
v zobrazení skupiny alebo zoznam.
• Diel alebo číslo podskupiny (29)
• Názov podskupiny alebo popis dielu (30)
• Číslo skupiny (31)
• Ćíslo zariadenia (32)
• Základné informácie o skupine (33). Označuje, ak sekcia pod hlavičkou
je pre špeciálnu variantu stroja alebo ak je to zoznam všeobecných
dielov. Ak zoznam má viac ako jednu variantu a každá varianta má svoj
vlastný montážny výkres, tak je zobrazená strana, ktorá odkazuje na
varianty montážneho výkresu.
• Interné informácie (34)

i Introduction Uvod
Uvod
Informacija o priročnikih
Podjetje Tetra Pak priporoča, da natančno preberete vse priložene priročnike.
Osebje, ki upravlja in vzdržuje opremo, mora imeti dostop do priloženih
priročnikov.
Katalog hranite v celotnem času uporabe opreme. V primeru, ko opremo
pridobi drug uporabnik, mu obenem izročite tudi katalog.
Podjetje Tetra Pak ne prevzema odgovornosti za poškodbe na opremi,
ki nastanejo zaradi neupoštevanja navodil iz priročnikov, ki so priloženi
opremi.
Priloženi priročniki
Priročniki, ki so priloženi opremi, vključujejo
• Priročnik za zamenjavo (CM)
V tem priročniku so podatki, ki tehnikom omogočajo izvesti zamenjavo
opreme med različnimi načini proizvodnje.
• Električni priročnik (EM)
Priročnik vsebuje informacije za tehnike o električnem sistemu opreme.
• Priročnik za namestitev (IM)
Priročnik vsebuje ustrezne tehnične informacije za varno namestitev
opreme.
• Priročnik za vzdrževanje (MM)
Priročnik vsebuje informacije za tehnike o vzdrževanju opreme.
• Priročnik za obratovanje (OM)
Priročnik je namenjen informiranju za pravilno rokovanje in upravljanje
s strojem pred, med in po proizvodnem postopku.
• Katalog rezervnih delov (SPC)
Priročnik vsebuje potrebne informacije za naročanje rezervnih delov
v podjetju Tetra Pak.
• Tehnični priročnik (TeM) vsebuje:
– ustrezne tehnične informacije za tehnike za varno namestitev opreme
– informacije za tehnike o vzdrževanju opreme
– informacije za tehnike o električnem sistemu opreme
– potrebne informacije za naročanje rezervnih delov v podjetju
Tetra Pak

Uvod i Introduction
Zgradba strani
Oglejte si risbo (A) na strani i-5: Glavne strani v Katalogu rezervnih delov
sestavljata stran z risbo (1) ter ustrezna stran s seznamom (7). Številka
strani (5) je v glavi na strani z risbo ter v nogi na strani s seznamom. Številka
dokumenta (6) je v nogi na strani s seznamom.
Številčenje strani
Oglejte si risbo (A) na strani i-5: Številko strani (5) sestavljajo trije deli:
• številka poglavja (2)
• zaporedna številka strani v poglavju (3)
• skupno število strani poglavja (4)
Predstavitev stroja
Proizvajalec
Ime in naslov proizvajalca poiščite na drugi strani tega kataloga.
Servis
Za naročanje rezervnih delov za stroj ter za sporočanje motenj pri delovanju
stroja se obrnite na najbližjo servisno službo podjetja Tetra Pak.
V primeru drugih zahtev, komentarjev, predlogov za izboljšavo opreme ali
dokumentacije se obrnite na odgovorno osebo.
Identifikacijska oznaka
CE klasifikacija
Oprema je izdelana v skladu z osnovnimi zdravstvenimi in varnostnimi
predpisi Evropskega gospodarskega prostora (EGP).

i Introduction Uvod
Ploščica s podatki
Risba (B) na strani i-5 prikazuje primer ploščice s podatki.
Risba veljavne ploščice s podatki ter mesto njene namestitve na opremi
je v uvodnem poglavju posameznih priročnikov, ki so priloženi opremi.
Na ploščici s podatki so zapisani spodaj našteti podatki, ki jih potrebujete
pri posvetovanju s podjetjem Tetra Pak.
• Tip stroja (8)
• Prostornina (9)
• Specifikacija risbe (10)
• Serijska številka stroja (11)
• Proizvajalec (12)
• CE oznaka (13)
• Leto izdelave (14)
Risba (C) na strani i-5 prikazuje primer specifikacije strojne opreme.

Prepričajte se, da podatki o opremi, ki so zapisani na prvih straneh
priročnika, ustrezajo podatkom na ploščici s podatki in specifikaciji strojne
opreme.
Uporaba Kataloga rezervnih delov

Določitev številke rezervnega dela
a) Oglejte si risbo (D) na strani i-5: Zatem si oglejte poglavje številka (15),
ki je označeno poleg glavne skupine, ki vsebuje želeni del.
Točki b) in c) se nanašata na risbo (E) na strani i-6.

b) Na risbi glavne skupine poiščite podskupino stroja (17), ki vključuje del
ali podskupino, ki ga (jo) iščete. Zapomnite si pozicijsko številko (18)
in pojdite na stran s seznamom, ki sledi risbi.
c) Poiščite pozicijsko številko (16) ali ime podskupine (19). Pojdite na
ustrezno številko strani (20), ki je označena v desnem stolpcu.
Točki d) in e) se nanašata na risbo (F) na strani i-6.
d) Na risbi podskupine poiščite sestavni del (21) in si zapišite njegovo
pozicijsko številko.
e) Številka sestavnega dela (29) in opis sestavnega dela (30) se nahajata
poleg pozicijske številke na strani s seznamom.

Uvod i Introduction
Informacije v Katalogu rezervnih delov

Spodnji seznam se nanaša na risbo (F) na strani i-6. V Katalogu rezervnih
delov so naslednje informacije o skupinah, podskupinah in rezervnih delih
za opremo:
• Referenca strukture skupine (22). Označuje naslednjo višjo skupino
v strukturi seznama opreme.
• Ime skupine (23) .
• Merska enota (25)
• Količina (26)
• Številka sestavne risbe (27)
• Število strani seznama (28). Vključeno, kadar risba ali seznam skupine
vsebuje več strani.
• Številka dela ali podskupine (29)
• Ime podskupine ali opis dela (30)
• Številka skupine (31)
• Številka opreme (32)
• Naslov skupine informacij (33). Označuje, če se odsek pod naslovom
nanaša na specifično izvedbo stroja, ali je seznam skupnih delov. Če ima
seznam več izvedb ter ima vsaka izvedba svojo sestavno risbo, je
prikazana referenčna stran sestavne risbe za to izvedbo.
• Interna informacija (34)

i Introduction Inledning
Inledning
Information om manualerna
Tetra Pak rekommenderar att alla manualer läses noggrant. Se till att manualerna
är tillgängliga för personalen som använder eller underhåller utrustningen.
Det är viktigt att denna katalog behålls under utrustningens livslängd, och
att den överlämnas till varje efterföljande innehavare eller användare av
utrustningen.
Tetra Pak tar inte ansvar för någon skada på utrustningen som orsakats av att
instruktionerna i medföljande manualer inte har följts.
Medföljande manualer
Följande manualer levereras tillsammans med utrustningen:
Manualen innehåller information för tekniker om hur utrustningen ska
konverteras mellan olika produktionslägen.
• Elektrisk manual (EM)
Manualen innehåller information för tekniker om utrustningens elektriska
system.
• Installationsmanual (IM)
Manualen innehåller information för tekniker om hur utrustningen
installeras på ett säkert sätt.
• Underhållsmanual (MM)
Manualen innehåller information för tekniker om hur utrustningen ska
underhållas.
• Driftsmanual (OM)
Manualen innehåller information för operatören om hur utrustningen ska
hanteras före, under och efter produktion.
• Reservdelskatalog (SPC)
Manualen innehåller information som behövs för beställning av reserv-
delar från Tetra Pak.
– innehåller information för tekniker om hur utrustningen installeras på
ett säkert sätt.
– innehåller information för tekniker om hur utrustningen ska underhållas.
– innehåller information för tekniker om utrustningens elektriska system.
– innehåller information som behövs för beställning av reservdelar från
Tetra Pak.

Inledning i Introduction
Sidlayout
Se bilden (A) på sidan i-5: Huvudsidorna i reservdelskatalogen består av en
bildsida (1) och en motsvarande listsida (7). Sidnumret (5) visas i sidhuvudet
på bildsidan och i sidfoten på listsidan. Dokumentnumret (6) visas i sidfoten
på listsidan.
Sidnumrering
Se bilden (A) på sidan i-5: Ett sidnummer (5) består av tre delar:
• kapitelnummer (2)
• löpande sidnummer inom kapitlet (3)
• totalt sidantal i kapitlet (4)
Introduktion till maskinen

Tillverkare
Tillverkarens namn och adress finns på sidan 2 i katalogen.
Service
För att beställa reservdelar till denna maskin eller för att rapportera problem
som uppstått i samband med driften kontaktar du närmaste Tetra Pak-kontor.
Har du andra frågor, kommentarer eller förslag som gäller förbättring av
maskinen eller utrustningen och dokumentationen vänder du dig till din
kontaktperson på Tetra Pak.
Identifiering
CE-klassificering
Denna utrustning överensstämmer med de grundläggande hälso- och säkerhets-
bestämmelserna inom den europeiska ekonomiska unionen (EEA).

i Introduction Inledning
Maskinskylt
Bilden (B) på sidan i-5 visar ett exempel på en maskinskylt. En bild på giltig
maskinskylt och dess placering på utrustningen visas i inledningskapitlet som
medföljer utrustningen. Skylten innehåller de uppgifter som listas nedan och
som behövs vid kontakt med Tetra Pak angående utrustningen.
• Maskintyp (8)
• Volym (9)
• Ritningsspecifikationer (10)
• Maskinnummer (11)
• Tillverkare (12)
• CE-märkning (13)
• Tillverkningsår (14)
Bilden (C) på sidan i-5 visar ett exempel på en maskinspecifikation. Kontrollera

att informationen om utrustningen som listas på manualens framsida motsvarar
informationen på maskinskylten och i maskinspecifikationen.
Använda reservdelskatalogen
Hitta ett reservdelsnummer
a) Se bilden (D) på sidan i-5: Gå till kapitelnumret (15) som står vid sidan
om huvudgruppen som innehåller den del du vill leta reda på.
Punkt b) och c) hänvisar till bilden (E) på sidan i-6.

b) På huvudgruppsbilden letar du efter den maskinundergrupp (17) som
innehåller delen eller undergruppen du letar efter. Notera positions-
numret (18) och gå till listsidan som följer efter bilden.
c) Leta efter positionsnumret (16) eller undergruppsnamnet (19). Gå till
motsvarande sidnummer (20) som listas i den högra kolumnen.
Punkt d) och e) hänvisar till bilden (F) på sidan i-6.
d) Leta reda på delen (21) i undergruppsbilden och notera delens positions-
nummer.
e) Reservdelsnumret (29) och reservdelsbeskrivningen (30) står bredvid
positionsnumret på listsidan.

Inledning i Introduction
Information i reservdelskatalogen
Listan nedan hänvisar till bilden (F) på sidan i-6. Reservdelskatalogen
innehåller följande information om grupper, undergrupper och reservdelar
för utrustningen:
• Gruppstrukturreferens (22). Anger nästa högre grupp i utrustningslistans
struktur.
• Gruppnamn (23) .
• Måttenhet (25)
• Kvantitet (26)
• Monteringsritningsnummer (27)
• Listsidesintervall (28). Står med om det finns flera sidor i gruppbilden
eller listan.
• Reservdels- eller undergruppsnummer (29)
• Undergruppsnamn eller reservdelsbeskrivning (30)
• Gruppnummer (31)
• Utrustningsnummer (32)
• Gruppinformationsrubrik (33). Anger om avsnittet under rubriken gäller
en viss maskinvariant eller om det är en lista över allmänna delar. Om en
lista har fler än en variant och varje variant har sin egen monteringsritning,
visas en sidhänvisning till variantens monteringsritning.
• Intern information (34)

SPC
Machine Type Group Description Used-In Page No
Tetra Pak 674851-1800 INFEEDER 674851-1800 Pos. 010

1-1 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 010 INFEEDER Drawing file: 674801-7_1_AA.hpgl
1-2 (68)
ECM: 189696 - 20041115
Assembly Drawing: 674801-7_1_AA
2 LAYER
160 2666284-0100 1 STACKER ..........................................................................1-5
Common Parts
010 2581878-0100 1 PUSHER ..........................................................................1-29
020 451491-0800 1 CRADLE ...........................................................................1-31
070 265636-0900 1 CRADLE ...........................................................................1-45
090 451494-0700 1 CRADLE ...........................................................................1-51
100 265672-0200 1 DRIVE UNIT ........................................................... 1-57, 1-59
110 2581870-0100 1 CONVEYING EQUIPMENT ............................................. 1-61
150 2604045-0100 1 PROTECTION ........................................................ 1-65, 1-67
Tetra Pak 674851-1800 INFEEDER 674851-1800 Pos. 010 674801-1200 1-3 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 160 STACKER Drawing file: 2666284-1_1_AA.hpgl
1-4 (68)
ECM: 172440 - 20040601
FEEDSIDE = LEFT
150 2636153-0000 1 COVER
170 2636782-0000 1 COVER
180 2636783-0000 1 FRAME
FEEDSIDE = RIGHT
150 2636155-0000 1 COVER
170 2636139-0000 1 COVER
180 2636157-0000 1 FRAME
Common Parts
010 2614205-0100 1 TUNNEL .............................................................................1-7
020 2618772-0200 1 LIFT ..................................................................................1-11
030 2636774-0100 1 RAILING ...........................................................................1-27
040 2614184-0000 4 BRACKET
050 2614186-0000 1 BRACKET
060 2614200-0000 1 BRACKET
070 2614201-0000 1 COVER
080 2614202-0000 1 COVER
120 2636141-0000 1 BRACKET
130 2636142-0000 1 SUPPORT
140 2636143-0000 1 SUPPORT
160 2636781-0000 1 HINGE
190 2636784-0000 2 BRACKET
200 2636785-0000 1 COVER
500 312105-0366 8 SCREW M6S ISO 4017 M6X12 A480
510 312105-0447 2 SCREW M6S ISO 4017 M8X12 A480
520 312105-0451 4 SCREW M6S ISO 4017 M8X20 A480
525 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
530 312105-0455 2 SCREW M6S ISO 4017 M8X30 A480
535 312605-0318 2 HEXAGON NUT, M6M M8 A280
540 315105-0153 8 WASHER BRB6,4X12RFR
550 315105-0165 12 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 STACKER 674801-1200 Pos. 160 2666284-0100 1-5 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666284-0100 Pos. 010 TUNNEL Drawing file: 2614205-1_1_AB.hpgl
1-6 (68)
ECM: 147437 - 20031120
Assembly Drawing: 2614205-1_1_AB
FEEDSIDE = LEFT 670 315105-0165 21 WASHER BRB8,4X16RFR
050 2614203-0000 1 COVER 675 315125-0146 2 WASHER TBRSB 5.3X15X1 A4
060 2614204-0000 1 COVER 680 352110-0100 7 CABLE CLIPS, D=5-7 MM
110 2636151-0000 1 ANGLE BRACKET B144 90459-1194 1 KEY SAF.SW. AZ16-03 ZVRK-M16
FEEDSIDE = RIGHT S112 2614217-0100 1 EMERGENCY STOP ........................................................1-9
050 2636136-0000 1 COVER
060 2636137-0000 1 COVER
110 2636154-0000 1 ANGLE BRACKET
Common Parts
010 2614183-0000 1 SPACER
020 2614185-0000 2 GLASS
030 2614186-0000 2 BRACKET
040 2614200-0000 2 BRACKET
070 2614206-0000 1 BRACKET
080 2614207-0000 1 BAR
090 2614208-0000 2 BRACKET
100 2614215-0000 1 BRACKET
120 2636152-0000 1 BRACKET
300 90017-0030 1 HANDLE, NO. 144.212.02.500
310 90044-0311 1 KEY FOR SAFETY SWITCH, AZ15/16 B2
320 90157-0041 1 SEALING COMPOUND, RHODORSEAL 5651
330 90347-0007 3 VIBRATION DAMPER
340 90347-0173 2 GAS SPRING NO. 03-06-120-094404/400N
350 90458-0306 1 CABLE GLAND, M16X1,5, NO.5311 1010
500 312105-0291 7 SCREW M6S ISO 4017 M4X12 A470
505 312105-0323 2 SCREW M6S ISO 4017 M5X8 A480
510 312105-0328 16 SCREW M6S ISO 4017 M5X14 A480
520 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
530 312105-0449 4 SCREW M6S ISO 4017 M8X16 A480
540 312105-0451 6 SCREW M6S ISO 4017 M8X20 A480
550 312105-0455 4 SCREW M6S ISO 4017 M8X30 A480
560 312105-0457 1 SCREW M6S ISO 4014 M8X35 A480
570 312115-0331 2 SCREW ISO4762 M5X20 A4
580 312155-0325 2 SCREW DIN 7991 MF6S M5X10 A480
590 312155-0451 2 SCREW DIN 7991 MF6S M8X20 A480
600 312605-0314 18 HEXAGON NUT, M6M M5 A280
620 312605-0318 8 HEXAGON NUT, M6M M8 A280
625 312625-0316 6 HEXAGON THIN NUT, EN 24035 ML6M M6 A4
630 312812-0312 7 HEXAGON NUT, NY-LOCK M4 A480
640 315105-0136 14 WASHER BRB4,3XRFR
650 315105-0146 18 WASHER BRB5,3X10RFR
660 315105-0153 8 WASHER BRB6,4X12RFR
Tetra Pak 674851-1800 TUNNEL 2666284-0100 Pos. 010 2614205-0100 1-7 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2614205-0100 Pos. S112 EMERGENCY STOP Drawing file: 2614217-1_1_AA.hpgl
1-8 (68)
ECM: 138664 - 20030708
-
010 2565086-0000 1 BRACKET
0300 90458-0307 1 CABLE GLAND, M20X1,5, NO.5311 1020
310 90459-1130 1 EM. STOP XAL-K178F
500 312105-0368 2 SCREW M6S ISO 4017 M6X16 A480
510 312125-0289 2 SCREW ISO 1207 M4X10 A4
520 312605-0316 2 HEXAGON NUT, M6M M6 A280
530 315105-0153 4 WASHER BRB6,4X12RFR
540 353250-0020 1 GLAND, LOCKNUT M20X1,5
Tetra Pak 674851-1800 EMERGENCY STOP 2614205-0100 Pos. S112 2614217-0100 1-9 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666284-0100 Pos. 020 LIFT Drawing file: 2618772-1_1_AA.hpgl
1-10 (68)
ECM: 172446 - 20040601
-
010 2614179-0100 1 VALVE RAMP .................................................................. 1-13
020 2614190-0100 1 STOP ............................................................................... 1-15
030 2618762-0100 1 COVER ............................................................................ 1-17
040 2618773-0200 1 CONNECTION BOX ........................................................ 1-19
050 2618785-0100 1 LIFT ..................................................................................1-21
060 2618786-0100 1 CONV.BODY,STRAIGHT ................................................ 1-23
070 2618805-0000 1 GUIDE
080 2618806-0000 1 GUIDE
090 2614191-0100 1 STOP ............................................................................... 1-25
500 312105-0325 4 SCREW M6S ISO 4017 M5X10 A480
510 315105-0146 4 WASHER BRB5,3X10RFR
Tetra Pak 674851-1800 LIFT 2666284-0100 Pos. 020 2618772-0200 1-11 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 010 VALVE RAMP Drawing file: 2614179-1_1_AD.hpgl
1-12 (68)
ECM: 190998 - 20041115
Assembly Drawing: 2614179-1_1_AD
-
010 2666184-0000 1 PNEUMATIC CHART
030 2636112-0000 1 SET OF SIGNS
310 90055-0147 1 HOSE,Y-CONNECTION,PARALLEL,FPT, 12X12MM
320 90328-0012 2 SILENCER
330 90458-1204 1 BASIC SUB-BASE FOR 4 VALVES
340 90458-1206 1 EXPANSION SUB-BASE FOR 2 VALVES
350 90458-1207 2 SEALING, STANDARD
360 90458-1208 1 SEALING, CHANNEL 1 BLOCKED
370 90458-1211 1 LEFT ENDPLATE INCL. 5M CABLE
380 90458-1214 1 RIGHT ENDPLATE EXTERNAL PILOT AIR
390 90458-1215 2 COVER PLATE FOR EMPTY VALVE POSITION
400 90458-1216 4 MOUNTING KIT (SPACERS), CDVI5.0-STB
415 90459-0698 4 PLUG, EXT. G-THREAD, G1/8
500 315400-0004 M 5 TUBE PUN-H-8X1,25-BL
510 315400-0010 M TUBE PUN-H-12X2-BL
520 315400-0010 M 5 TUBE PUN-H-12X2-BL
530 315400-0010 M 5 TUBE PUN-H-12X2-BL
540 350001-0006 6 PUSH-IN FITTING QS-F-G1/8-6
570 350002-0012 2 PUSH-IN L-FITTING QSL-F-G1/8-4
620 350004-0003 1 PUSH-IN L-FITTING QSL-F-8
630 350005-0003 1 PUSH-IN T-FITTING QST-F-8
650 350007-0011 1 PUSH-IN T-FITTING QST-F-G1/4-12
660 350013-0002 2 PLUG QSC-6H
670 352113-0101 20 CLIP STRIP, 92X2,5 MM
680 352113-0206 5 ANCHOR PLATES FOR STRIPS, TYPE ABM100-AT
690 359009-0800 1 CABLE MARKER, YELLOW, PK 2/4, 0-9
700 359009-0102 10 CABLE MARKER, YELLOW, PK 2/4, 2
Y120 90458-1194 1 MONOSTABLE VALVE 5/2
Y121 90458-1199 1 VALVE CLOSED IN MID-POSITION, 5/3
Y124 2636134-0000 1 NON-RETURN VALVE
Y125 90459-2425 1 PRESSURE REGULATOR IN-LINE, BSP-1/4
Tetra Pak 674851-1800 VALVE RAMP 2618772-0200 Pos. 010 2614179-0100 1-13 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 020 STOP Drawing file: 2614190-1_1_AD.hpgl
1-14 (68)
ECM: 191472 - 20041115
- 660 315755-0106 2 RETAINING RING SHAFT DIN 6799 4 A2
010 548930-0000 2 BRACKET 670 321111-0306 2 FLANGE BUSHING, 20X26X25 MM
020 722997-0000 2 ARM B161.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
030 975054-0000 2 ROLL B161.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
040 975324-0000 1 MOUNTING SHEET B162.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
050 975325-0000 1 MOUNTING SHEET B162.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
060 975326-0000 2 CYLINDER BRACKET
070 975327-0000 2 LINK ARM
080 975328-0000 2 SHAFT
090 975329-0000 2 WASHER
100 975332-0000 1 STRUT
110 2604000-0000 1 BRACKET
120 2604008-0000 1 BRACKET
130 2604039-0000 1 BRACKET
140 2614192-0000 2 SHAFT
150 2614193-0000 1 BRACKET
160 2614194-0000 1 BRACKET
170 2614196-0000 1 BRACKET
180 2614197-0000 1 BRACKET
190 2614212-0000 2 STOP PLATE
200 2703570-0000 2 BRACKET
300 90235-0846 2 THROTTLE CHECK VALVE G1/8", MANUAL, 6
310 90239-0405 1 ROD END,BALL JOINT EYE M10X1,25
320 90459-0658 1 DOUBLE ACTING, PROFILE,CYL 32-25
330 90459-2650 1 SWIVEL FLANGE 32
500 312105-0299 4 SCREW M6S ISO 4017 M4X30 A470
505 312105-0293 4 SCREW M6S ISO 4017 M4X16 A470
510 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
520 312105-0372 8 SCREW M6S ISO 4017 M6X25 A480
530 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
540 312105-0460 6 SCREW M6S ISO 4014 M8X45 A480
550 312105-0505 2 SCREW M6S ISO 4014 M10X70 A480
560 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
570 312155-0453 2 SCREW DIN 7991 MF6S M8X25 A480
580 312155-0457 4 SCREW DIN 7991 MF6S M8X35 A480
610 315105-0136 8 WASHER BRB4,3XRFR
620 315105-0153 12 WASHER BRB6,4X12RFR
630 315105-0165 12 WASHER BRB8,4X16RFR
640 315105-0173 4 WASHER BRB10,5X22RFR
650 315400-0001 M 3 TUBE PUN-H-6X1-BL
Tetra Pak 674851-1800 STOP 2618772-0200 Pos. 020 2614190-0100 1-15 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 030 COVER Drawing file: 2618762-1_1_AA.hpgl
1-16 (68)
ECM: 138690 - 20030708
-
010 2618759-0000 1 COVER
020 2618760-0000 1 PROTECTION
030 2618761-0000 1 COVER
040 2618765-0000 1 PLATE
500 312105-0368 10 SCREW M6S ISO 4017 M6X16 A480
510 315105-0153 10 WASHER BRB6,4X12RFR
Tetra Pak 674851-1800 COVER 2618772-0200 Pos. 030 2618762-0100 1-17 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 040 CONNECTION BOX Drawing file: 2618773-2_1_AA.hpgl
1-18 (68)
ECM: 172447 - 20040601
-
010 2618774-0000 1 CONNECTION BOX
020 2618769-0000 1 BRACKET
030 268964-0000 2 SPACER
300 90062-0059 1 LOCK WASHER SERRAT.EXT.GEAR,4,3/8 H=0,5
310 90077-0079 32 FEED THROUGH TERMINAL, 02943.6
320 90458-0305 12 CABLE GLAND, M12X1,5, NO.5311 1000
340 90135-0026 2 EARTH TERMINAL, 3802.6
350 90458-0308 1 CABLE GLAND, M25X1,5, NO.5311 1030
500 353101-0120 1 CABLE SHOE 0,5-1,5MM2 M4 RED
510 359011-0821 2 SET OF SIGNS 6-FW 1-50
520 312125-0293 2 SCREW ISO 1207 M4X16 A4
530 312125-0287 1 SCREW ISO 1207 M4X8 A4
540 315105-0136 2 WASHER BRB4,3XRFR
550 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
560 315105-0153 4 WASHER BRB6,4X12RFR
570 353042-0004 MM 230 RAIL TS 35/7,5
Tetra Pak 674851-1800 CONNECTION BOX 2618772-0200 Pos. 040 2618773-0200 1-19 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 050 LIFT Drawing file: 2618785-1_1_AD.hpgl
1-20 (68)
ECM: 191471 - 20041115
-
010 2618763-0000 3 PLATE
020 2618766-0000 2 BRACKET
030 2618783-0000 1 GUIDE
040 2618789-0000 1 PLATE
050 2618790-0000 2 PLATE
060 2618791-0000 2 PLATE
070 2618792-0000 4 SPACER
080 2618793-0000 2 PLATE
090 2618794-0000 4 SPACER
100 2618795-0000 1 GUIDE
110 2618764-0000 1 SPACER
120 2618770-0000 1 PLATE
130 2703571-0000 1 GUIDE
140 2703572-0000 1 GUIDE
300 90459-0397 1 DOUBLE ACTING, PROFILE, CYL 32-160
310 90459-2240 2 CYLINDER WITH INT. GUIDING BORE 12
320 90459-3148 1 LINEAR GUIDE UNIT, BORE 32-STROKE 160
330 90235-0844 4 THROTTLE CHECK VALVE, M5, MANUAL, 6MM
340 90235-0848 2 THROTTLE CHECK VALVE, G1/8", MANUAL,8
350 350006-0006 4 PUSH-IN FITTING QS-F-10H-8
500 312105-0370 12 SCREW M6S ISO 4017 M6X20 A480
510 312105-0372 26 SCREW M6S ISO 4017 M6X25 A480
520 312105-0380 8 SCREW M6S ISO 4014 M6X50 A480
530 312105-0459 8 SCREW M6S ISO 4014 M8X40 A480
535 312105-0327 2 SCREW M6S ISO 4017 M5X12 A480
540 312115-0297 4 SCREW ISO4762 M4X25 A4
550 312115-0367 4 SCREW ISO4762 M6X14 A4
560 312155-0291 8 SCREW DIN 7991 MF6S M4X12 A480
565 315105-0146 2 WASHER BRB5,3X10RFR
570 315105-0153 48 WASHER BRB6,4X12RFR
580 315105-0165 8 WASHER BRB8,4X16RFR
590 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
B164 90458-2775 1 PROXIMITY SWITCH SMT-8-PS-K-LED-
Tetra Pak 674851-1800 LIFT 2618772-0200 Pos. 050 2618785-0100 1-21 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 060 CONV.BODY,STRAIGHT Drawing file: 2618786-1_1_AB.hpgl
1-22 (68)
ECM: 189698 - 20041115
-
010 1086222-0000 1 JOINT PIECE
020 1086223-0000 1 SPACER PIECE
030 1086305-0002 4 SLIDE RAIL
040 1086180-0000 16 SLEEVE
050 2618787-0000 1 COVERING PLATE
060 2618788-0000 1 COVERING PLATE
070 2636812-0000 4 SLEEVE
080 2636813-0000 1 JOINT PIECE
500 312105-0449 10 SCREW M6S ISO 4017 M8X16 A480
510 315105-0165 10 WASHER BRB8,4X16RFR
520 312155-0449 4 SCREW DIN 7991 MF6S M8X16 A480
Tetra Pak 674851-1800 CONV.BODY,STRAIGHT 2618772-0200 Pos. 060 2618786-0100 1-23 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2618772-0200 Pos. 090 STOP Drawing file: 2614191-1_1_AC.hpgl
1-24 (68)
ECM: 148166 - 20031120
Assembly Drawing: 2614191-1_1_AC
- 670 321111-0306 2 FLANGE BUSHING, 20X26X25 MM
010 548930-0000 2 BRACKET B160.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
020 722997-0000 2 ARM B160.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
030 975054-0000 2 ROLL B163.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
050 975325-0000 1 MOUNTING SHEET
070 975327-0000 2 LINK ARM
080 975328-0000 2 SHAFT
090 975329-0000 2 WASHER
100 975332-0000 1 STRUT
110 2604000-0000 1 BRACKET
120 2604008-0000 1 BRACKET
130 2604039-0000 1 BRACKET
140 2614192-0000 2 SHAFT
150 2614193-0000 1 BRACKET
160 2614194-0000 1 BRACKET
170 2614196-0000 1 BRACKET
180 2614197-0000 1 BRACKET
190 2614212-0000 2 STOP PLATE
200 2636156-0000 2 SPACER
330 90459-2650 1 SWIVEL FLANGE 32
500 312105-0299 4 SCREW M6S ISO 4017 M4X30 A470
510 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
520 312105-0372 8 SCREW M6S ISO 4017 M6X25 A480
530 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
540 312105-0460 6 SCREW M6S ISO 4014 M8X45 A480
550 312105-0505 2 SCREW M6S ISO 4014 M10X70 A480
560 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
570 312155-0453 2 SCREW DIN 7991 MF6S M8X25 A480
580 312155-0457 4 SCREW DIN 7991 MF6S M8X35 A480
610 315105-0136 4 WASHER BRB4,3XRFR
620 315105-0153 12 WASHER BRB6,4X12RFR
630 315105-0165 12 WASHER BRB8,4X16RFR
640 315105-0173 4 WASHER BRB10,5X22RFR
650 315400-0001 M 3 TUBE PUN-H-6X1-BL
660 315755-0106 2 RETAINING RING SHAFT DIN 6799 4 A2
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666284-0100 Pos. 030 RAILING Drawing file: 2636774-1_1_AB.hpgl
1-26 (68)
ECM: 151134 - 20031120
-
010 1086637-0000 4 SLEEVE
020 1086638-0000 4 DOLLY
030 2581910-0000 4 HOLDER
040 2636779-0000 2 PIPE
050 2604011-0000 4 STUD SCREW
060 2604014-0000 4 HOLDER
070 2604034-0000 4 SLEEVE
080 2604035-0000 4 STUD SCREW
090 2659229-0000 2 PIPE
300 90005-0116 8 WASHER PLAIN ROUND 8,4(M8)/24, H=2
310 90051-0030 4 STELLAR KNOB, INT. THREAD, NO. 8306-0308
320 90261-0051 4 PLUG, BLIND, PLASTIC NO. 21660
510 312115-0370 8 SCREW ISO4762 M6X20 A4
520 312605-0318 4 HEXAGON NUT, M6M M8 A280
530 315105-0153 8 WASHER BRB6,4X12RFR
Tetra Pak 674851-1800 RAILING 2666284-0100 Pos. 030 2636774-0100 1-27 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 010 PUSHER Drawing file: 2581878-1_1_AC.hpgl
1-28 (68)
ECM: 197268 - 20041220
PL180-299 610 312155-0451 2 SCREW DIN 7991 MF6S M8X20 A480
100 2690092-0000 1 SPACER 620 312812-0314 2 HEXAGON NUT, NY-LOCK M5 A480
PL300-420 630 312812-0316 1 HEXAGON NUT, NY-LOCK M6 A480
100 2690093-0000 1 SPACER 640 315105-0136 2 WASHER BRB4,3XRFR
Common Parts 650 315105-0146 4 WASHER BRB5,3X10RFR
010 451457-0000 1 PISTON ROD HEAD 660 315105-0153 11 WASHER BRB6,4X12RFR
020 451458-0002 1 CYLINDER BRACKET 670 315105-0165 2 WASHER BRB8,4X16RFR
030 451459-0000 1 SHAFT 680 315121-0153 4 WASHER PLAIN, TBRSB 6,4/22 H=4
040 451483-0000 1 PLATE 690 315750-0109 2 RETAINING RING SHAFT DIN 471 ST 12
050 484632-0000 1 CANTILEVER 700 315760-0128 8 SNAP RING BR28
060 484633-0005 2 PILLAR 710 321105-0234 4 BEAR. BUSH. WITHOUT FL, 20X28X30 MM
070 484641-0000 1 WEDGE 740 344502-0026 2 GREASE NIPPLE STRAIGHT R1/8 CON.
080 560905-0000 1 PLATE 750 350001-0009 3 PUSH-IN FITTING QS-F-G1/4-8
090 2581880-0000 1 COVER 760 350002-0009 1 PUSH-IN L-FITTING QSL-F-G1/4-8
110 2701283-0000 1 SHELF 770 350004-0003 2 PUSH-IN L-FITTING QSL-F-8
120 2701284-0000 1 PROTECTION PLATE B102 90459-2391 1 PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE
300 90028-0021 4 CONE TUBE 4 MM B103 90459-2391 1 PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE
310 90032-0012 2 DISTR. BLOCK & DIST.5/16-24UNF X4 B108 90459-2391 1 PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE
320 90134-0003 4 BUSHING
330 90134-0010 2 ADAPTER 5/16-24, R1/8
340 90134-0031 4 SLEEVE FOR PLASTIC TUBE
350 90136-0002 4 PLUG 5/16"24
360 90137-0005 2 BANJO CONN. M6, 5/16-24UNF
370 90165-0003 2 PIPE CLIP FOR TUBE D=4 MM
380 315400-0004 M 10 TUBE PUN-H-8X1,25-BL
390 90166-0109 M 2 TUBE 4 MM PA,TRANSP.
400 90235-0161 1 VALVE
410 90239-0346 1 ROD END,CLEVIS W.AXLE M12X1,25
450 90459-2394 1 SWIWEL FLANGE 40
460 90459-2777 1 ONE-WAY FLOW CONTROL VALVE, GR-QS-8
500 312105-0297 2 SCREW M6S ISO 4017 M4X25 A470
510 312105-0333 2 SCREW M6S ISO 4017 M5X25 A480
520 312105-0366 6 SCREW M6S ISO 4017 M6X12 A480
530 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
540 312105-0372 4 SCREW M6S ISO 4017 M6X25 A480
550 312105-0451 2 SCREW M6S ISO 4017 M8X20 A480
560 312115-0329 4 SCREW ISO4762 M5X16 A4
570 312115-0341 2 SCREW ISO4762 M5X50 A4
580 312125-0285 2 SCREW ISO 1207 M4X6 A4
590 312155-0368 4 SCREW DIN 7991 MF6S M6X16 A480
600 312155-0376 1 SCREW DIN 7991 MF6S M6X35 A480
Tetra Pak 674851-1800 PUSHER 674801-1200 Pos. 010 2581878-0100 1-29 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 020 CRADLE Drawing file: 451491-5_1_AA.hpgl
1-30 (68)
ECM: 189324 - 20041115
50HZ 674851 LINF
032 1 575023-0000 1 PROTECTION
065 1 161252-0000 1 SPROCKET
50HZ 674851 RINF
032 2 575024-0000 1 PROTECTION
065 1 161252-0000 1 SPROCKET
60HZ 674851 LINF
032 1 575023-0000 1 PROTECTION
065 2 279907-0000 1 SPROCKET
60HZ 674851 RINF
032 2 575024-0000 1 PROTECTION
065 2 279907-0000 1 SPROCKET
Common Parts
010 2690095-0000 1 SHEET
020 2690096-0000 1 SHEET
030 596929-0100 1 GUIDE ROLLER .............................................................. 1-33
040 484946-0400 1 FILM TENSIONER UPPER ............................................. 1-35
045 575042-0000 1 REEL HOLDER
050 259390-0100 1 FEED ROLLER ................................................................ 1-37
052 575043-0000 1 REEL HOLDER
055 449710-0200 1 STRIPPER .......................................................................1-39
057 575026-0000 1 PROTECTION
060 265617-0100 1 CYLINDER HOLDER .......................................................1-41
070 259389-0000 2 MOUNTING BLOCK
075 265631-0000 2 SECURING PLATE
080 575038-0100 1 BOBBIN HOLDER ........................................................... 1-43
090 486729-0000 1 SHAFT
120 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
130 312105-0378 8 SCREW M6S ISO 4014 M6X40 A480
140 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
150 312105-0455 12 SCREW M6S ISO 4017 M8X30 A480
160 312318-0321 1 SCREW ISO4029 M5X6 A4
170 312605-0316 4 HEXAGON NUT, M6M M6 A280
180 315105-0153 14 WASHER BRB6,4X12RFR
190 315105-0165 8 WASHER BRB8,4X16RFR
200 315121-0153 8 WASHER PLAIN, TBRSB 6,4/22 H=4
220 318201-0033 1 ROLLER CHAIN, SINGLE 3/8 -33
230 90458-0306 2 CABLE GLAND, M16X1,5, NO.5311 1010
M104 90458-0755 1 GEARS, WORM MOTOR 1600079
Tetra Pak 674851-1800 CRADLE 674801-1200 Pos. 020 451491-0800 1-31 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 030 GUIDE ROLLER Drawing file: 596929-1_1_AA.hpgl
1-32 (68)
ECM: 82327 -
-
010 449793-0000 2 REEL HOLDER
020 90014-0017 1 DRIVE ROLLER, NO. 2602-20-6-530
030 312105-0457 2 SCREW M6S ISO 4014 M8X35 A480
040 315105-0165 2 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 GUIDE ROLLER 451491-0800 Pos. 030 596929-0100 1-33 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 040 FILM TENSIONER UPPER Drawing file: 484946-2_1_AA.tif
1-34 (68)
ECM: 191473 - 20041115
674851
090 466460-0003 1 PIN
110 90014-0017 2 DRIVE ROLLER, NO. 2602-20-6-530
Common Parts
005 449803-0000 2 HOLDER
010 458319-0000 1 ROD
020 484941-0000 1 HOLDER
030 484944-0000 1 SHAFT
040 484945-0000 2 ARM
050 161235-0000 1 INDICATION
060 259377-0000 1 BEARING HOUSING
070 259383-0000 1 HOLDER
100 442474-0000 1 SPRING BRACKET
130 484942-0000 2 BRACKET
140 484943-0000 1 SHAFT
150 522350-0000 4 RING
170 90141-0015 2 RETAINING RING FOR SHAFT DIN 471 8 A2
180 90335-0083 1 SPRING
190 90335-0079 1 COMP. SPRING 23040, 2,5X22,5X36
200 311103-1456 1 PARALLEL PIN ISO 2338 10M6X24 A1
210 312105-0337 6 SCREW M6S ISO 4014 M5X35 A480
220 312115-0327 2 SCREW ISO4762 M5X12 A4
230 312115-0329 6 SCREW ISO4762 M5X16 A4
240 312115-0370 10 SCREW ISO4762 M6X20 A4
250 312115-0453 1 SCREW ISO4762 M8X25 A4
260 312115-0463 1 SCREW ISO4762 M8X60 A4
270 312318-0360 2 SCREW ISO4029 M6X6 A4
280 312605-0314 6 HEXAGON NUT, M6M M5 A280
290 312605-0316 2 HEXAGON NUT, M6M M6 A280
300 312705-0316 2 NUT HEX. DOMED CAP MHM-6 M6 A280
310 315105-0146 6 WASHER BRB5,3X10RFR
320 315105-0153 2 WASHER BRB6,4X12RFR
330 315105-0165 1 WASHER BRB8,4X16RFR
335 315202-0215 4 O-RING 19,2X3 MM
340 315753-0117 1 RETAINING RING FOR BORE DIN 472 22 A2
350 321302-0298 2 BALL BEARING, 8X22X7 MM
B110 90458-0675 1 PROXIMITY SENSOR, E2EG-X5MB1-5M
Tetra Pak 674851-1800 FILM TENSIONER UPPER 451491-0800 Pos. 040 484946-0400 1-35 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 050 FEED ROLLER Drawing file: 259390-1_1_AA.tif
1-36 (68)
ECM: --
-
010 259391-0000 1 ROLLER
020 161252-0000 1 SPROCKET
050 312111-0370 6 SCREW HEX.SOCK.HD.MC6S-TT 6X20 88 FZB
060 312316-0320 1 SCREW HEX.SOCK.SET CUP P.MSK6SS5X5 FZB
070 315701-0170 1 PARALLEL KEY W. ROUND ENDS 4X4X20 MM
080 315750-0114 2 RETAINING RING SHAFT DIN 471 ST 17
090 315752-0124 1 RETAINING RING FOR BORE DIN 472 35 ST
Tetra Pak 674851-1800 FEED ROLLER 451491-0800 Pos. 050 259390-0100 1-37 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 055 STRIPPER Drawing file: 449710-1_1_AA.tif
1-38 (68)
ECM: --
-
010 449792-0000 1 SHAFT STAINLESS
030 449791-0000 8 FINGER
070 312105-0372 2 SCREW M6S ISO 4017 M6X25 A480
100 312105-0289 8 SCREW M6S ISO 4017 M4X10 A470
150 315105-0136 8 WASHER BRB4,3XRFR
200 315125-0153 2 WASHER TBRSB 6,4X22X4 A4
Tetra Pak 674851-1800 STRIPPER 451491-0800 Pos. 055 449710-0200 1-39 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 060 CYLINDER HOLDER Drawing file: 265617-1_1_AA.tif
1-40 (68)
ECM: --
-
010 265618-0000 1 SHAFT
020 265619-0000 1 SHAFT
030 90335-0042 2 TENSION SPRING 42270, 1,8X20X73
040 265620-0000 2 ARM
050 265621-0000 2 ARM
060 265622-0000 2 SLEEVE
070 265623-0000 2 SHAFT
080 265624-0000 8 ROLL
090 90068-0012 8 RUBBER ELEMENT REPBY 0090439-0224
100 312105-0457 4 SCREW M6S ISO 4014 M8X35 A480
110 312105-0372 2 SCREW M6S ISO 4017 M6X25 A480
120 312104-0378 2 SCREW M6S M6X40H FZB
130 312115-0455 2 SCREW ISO4762 M8X30 A4
140 312318-0447 8 SCREW ISO4029 M8X12 A4
150 312605-0316 6 HEXAGON NUT, M6M M6 A280
160 315105-0165 4 WASHER BRB8,4X16RFR
180 321111-0274 2 FLANGE BUSHING, 18X24X18 MM
Tetra Pak 674851-1800 CYLINDER HOLDER 451491-0800 Pos. 060 265617-0100 1-41 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451491-0800 Pos. 080 BOBBIN HOLDER Drawing file: 575038-1_1_AA.hpgl
1-42 (68)
ECM: --
-
010 575037-0000 1 PIPE
020 575039-0000 4 RETAINING RING
030 90261-0025 2 PLUG, BLIND, PLASTIC GPN300F28
040 312318-0445 4 SCREW ISO4029 M8X10 A4
Tetra Pak 674851-1800 BOBBIN HOLDER 451491-0800 Pos. 080 575038-0100 1-43 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 070 CRADLE Drawing file: 265636-6_1_AA.hpgl
1-44 (68)
ECM: 189325 - 20041115
50HZ X113 2666279-0100 1 CONNECTION BOX ....................................................... 1-49
003 1 161252-0000 1 SPROCKET
60HZ
003 2 279907-0000 1 SPROCKET
Common Parts
005 545977-0000 1 SHEET
010 545978-0000 1 SHEET
015 575029-0000 1 SUPPORT
020 575028-0000 1 SUPPORT
025 536433-0000 2 SHEET
030 596929-0100 1 GUIDE ROLLER .............................................................. 1-33
032 2703573-0000 1 COVERING PLATE
035 575023-0000 1 PROTECTION
040 575026-0000 1 PROTECTION
050 259390-0100 1 FEED ROLLER ................................................................ 1-37
052 279941-0000 2 BEAM
055 449710-0200 1 STRIPPER .......................................................................1-39
060 265617-0100 1 CYLINDER HOLDER .......................................................1-41
080 575038-0100 1 BOBBIN HOLDER ........................................................... 1-43
081 479387-0500 1 FILM CONTROL .............................................................. 1-47
090 265646-0000 2 FASTENING PLATE
103 90015-0019 10 BUSHING
104 90015-0020 2 LEAD-IN, TET5-7, E-1458016
107 90256-0001 1 TAPE SUPPLY HOLDER, TYPE 2000
110 312105-0331 2 SCREW M6S ISO 4017 M5X20 A480
115 312105-0366 10 SCREW M6S ISO 4017 M6X12 A480
130 312105-0376 4 SCREW M6S ISO 4014 M6X35 A480
135 312105-0378 16 SCREW M6S ISO 4014 M6X40 A480
140 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
145 312105-0455 10 SCREW M6S ISO 4017 M8X30 A480
155 312115-0366 2 SCREW ISO4762 M6X12 A4
160 312318-0321 1 SCREW ISO4029 M5X6 A4
163 315105-0146 2 WASHER BRB5,3X10RFR
165 315105-0153 14 WASHER BRB6,4X12RFR
170 315105-0165 8 WASHER BRB8,4X16RFR
200 312605-0316 4 HEXAGON NUT, M6M M6 A280
M105 90458-0755 1 GEARS, WORM MOTOR 1600079
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
265636-0900 Pos. 081 FILM CONTROL Drawing file: 479387-3_1_AA.hpgl
1-46 (68)
ECM: 189321 - 20041115
-
010 479375-0000 2 HOLDER
020 582260-0000 2 SPACER
050 90005-0082 4 WASHER PLAIN ROUND 4,3(M4)/12,H=1
070 312115-0337 2 SCREW ISO4762 M5X35 A4
080 312115-0339 2 SCREW ISO4762 M5X40 A4
100 312125-0297 4 SCREW ISO 1207 M4X25 A4
B107.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B107.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Tetra Pak 674851-1800 FILM CONTROL 265636-0900 Pos. 081 479387-0500 1-47 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
265636-0900 Pos. X113 CONNECTION BOX Drawing file: 2666279-1_1_AA.hpgl
1-48 (68)
ECM: 172435 - 20041115
-
010 8490-0010 1 MOUNTING RAIL
020 268964-0000 2 SPACER
030 2666275-0000 1 CONNECTION BOX
320 90135-0026 2 EARTH TERMINAL, 3802.6
340 90458-0313 7 CABLE GLAND, M12X1,5, NO.5311 1100
350 90458-0316 1 CABLE GLAND, M25X1,5, NO.5311 1130
360 90458-1306 4 BLIND PLUG CIRCULAR, M12X1,5 514GFK/212
500 312125-0287 1 SCREW ISO 1207 M4X8 A4
510 312125-0291 2 SCREW ISO 1207 M4X12 A4
520 312125-0295 2 SCREW ISO 1207 M4X20 A4
530 315105-0136 2 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 CONNECTION BOX 265636-0900 Pos. X113 2666279-0100 1-49 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 090 CRADLE Drawing file: 451494-2_1_AA.tif
1-50 (68)
ECM: 189322 - 20041115
-
010 449743-0000 2 SHEET
020 575040-0000 1 GUIDE
030 575041-0000 1 GUIDE
040 259388-0000 1 STRUT
080 575038-0100 2 BOBBIN HOLDER ........................................................... 1-43
083 479388-0500 1 FILM CONTROL .............................................................. 1-53
085 312105-0379 8 SCREW M6S ISO 4014 M6X45 A480
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
100 484947-0400 1 FILM TENSIONER LOWER ............................................ 1-55
105 312105-0460 12 SCREW M6S ISO 4014 M8X45 A480
110 315105-0165 8 WASHER BRB8,4X16RFR
140 312605-0316 8 HEXAGON NUT, M6M M6 A280
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451494-0700 Pos. 083 FILM CONTROL Drawing file: 479388-3_1_AA.hpgl
1-52 (68)
ECM: 189323 - 20041115
-
010 479375-0000 2 HOLDER
070 312115-0337 4 SCREW ISO4762 M5X35 A4
100 312125-0297 4 SCREW ISO 1207 M4X25 A4
B106.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B106.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Tetra Pak 674851-1800 FILM CONTROL 451494-0700 Pos. 083 479388-0500 1-53 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
451494-0700 Pos. 100 FILM TENSIONER LOWER Drawing file: 484947-2_1_AA.tif
1-54 (68)
ECM: 191474 - 20041115
674851
080 466460-0003 1 PIN
110 90014-0017 2 DRIVE ROLLER, NO. 2602-20-6-530
Common Parts
010 442471-0000 2 HOLDER
020 484945-0000 2 ARM
030 484949-0000 1 SHAFT
040 161235-0000 1 INDICATION
060 259383-0000 1 HOLDER
090 484942-0000 2 BRACKET
100 522350-0000 4 RING
140 312105-0337 6 SCREW M6S ISO 4014 M5X35 A480
150 312115-0327 2 SCREW ISO4762 M5X12 A4
160 312115-0329 6 SCREW ISO4762 M5X16 A4
170 312115-0370 10 SCREW ISO4762 M6X20 A4
180 312318-0360 1 SCREW ISO4029 M6X6 A4
190 312605-0314 6 HEXAGON NUT, M6M M5 A280
200 312605-0316 2 HEXAGON NUT, M6M M6 A280
220 315105-0146 6 WASHER BRB5,3X10RFR
230 315105-0153 2 WASHER BRB6,4X12RFR
235 315202-0215 4 O-RING 19,2X3 MM
240 315753-0117 1 RETAINING RING FOR BORE DIN 472 22 A2
B101 90458-0675 1 PROXIMITY SENSOR, E2EG-X5MB1-5M
Tetra Pak 674851-1800 FILM TENSIONER LOWER 451494-0700 Pos. 100 484947-0400 1-55 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 100 DRIVE UNIT Drawing file: 265672-3_1_AA.tif
1-56 (68)
ECM: --
Assembly Drawing: 265672-3_1_AA This list covers pages from 1-56 to 1-59
50HZ LINF (See drawing on page: 1-58)
005 1 161257-0000 1 SPROCKET
50HZ RINF (See drawing on page: 1-56)
005 1 161257-0000 1 SPROCKET
005 2 279908-0000 1 SPROCKET
005 2 279908-0000 1 SPROCKET
Common Parts
010 265674-0000 1 PROTECTION
020 265675-0000 1 MOTOR SHELF
070 312105-0366 1 SCREW M6S ISO 4017 M6X12 A480
080 312105-0457 6 SCREW M6S ISO 4014 M8X35 A480
090 312318-0362 2 SCREW ISO4029 M6X8 A4
100 315105-0153 1 WASHER BRB6,4X12RFR
110 315105-0165 4 WASHER BRB8,4X16RFR
130 318232-0035 1 ROLLER CHAIN DUPLEX 1/2"-35
M106 90069-0084 1 GEARS, HELICAL MOTOR SK01-71L/4
Tetra Pak 674851-1800 DRIVE UNIT 674801-1200 Pos. 100 265672-0200 1-57 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
1-58 (68)
ECM: --
005 1 161257-0000 1 SPROCKET
005 1 161257-0000 1 SPROCKET
005 2 279908-0000 1 SPROCKET
005 2 279908-0000 1 SPROCKET
Common Parts
010 265674-0000 1 PROTECTION
020 265675-0000 1 MOTOR SHELF
070 312105-0366 1 SCREW M6S ISO 4017 M6X12 A480
080 312105-0457 6 SCREW M6S ISO 4014 M8X35 A480
090 312318-0362 2 SCREW ISO4029 M6X8 A4
100 315105-0153 1 WASHER BRB6,4X12RFR
110 315105-0165 4 WASHER BRB8,4X16RFR
130 318232-0035 1 ROLLER CHAIN DUPLEX 1/2"-35
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 110 CONVEYING EQUIPMENT Drawing file: 2581870-1_1_AB.hpgl
1-60 (68)
ECM: 186586 - 20041115
FEEDSIDE = LEFT 1 LAYER 220 1353502-0000 1 SLIDE RAIL
010 2603999-0100 1 STOP ............................................................................... 1-63 230 1353503-0000 1 SLIDE RAIL
140 722928-0000 1 COVER 240 2604021-0000 1 BRACKET
250 2604022-0000 1 STOP 300 90344-0071 1 SPROCKET 10T (115366)
260 2604037-0000 1 COVER 310 90345-0020 2 FLANGE BEARING, 25X124X38, 8 MM
510 312105-0364 6 SCREW M6S ISO 4017 M6X10 A480 500 312105-0325 4 SCREW M6S ISO 4017 M5X10 A480
620 315105-0153 12 WASHER BRB6,4X12RFR 520 312105-0372 4 SCREW M6S ISO 4017 M6X25 A480
FEEDSIDE = LEFT 2 LAYER 530 312105-0449 16 SCREW M6S ISO 4017 M8X16 A480
250 2666283-0000 1 STOP 540 312105-0495 4 SCREW M6S ISO 4017 M10X30 A480
510 312105-0364 2 SCREW M6S ISO 4017 M6X10 A480 550 312115-0224 2 SCREW ISO4762 M3X10 A4
620 315105-0153 8 WASHER BRB6,4X12RFR 560 312155-0368 2 SCREW DIN 7991 MF6S M6X16 A480
FEEDSIDE = RIGHT 1 LAYER 570 312318-0366 3 SCREW ISO4029 M6X12 A4
010 2603999-0100 1 STOP ............................................................................... 1-63 580 312605-0316 2 HEXAGON NUT, M6M M6 A280
140 722929-0000 1 COVER 590 312605-0320 5 HEXAGON NUT, M6M M10 A280
250 2604022-0000 1 STOP 600 315105-0124 2 WASHER BRB3,2X6RFR
260 2604028-0000 1 COVER 610 315105-0146 4 WASHER BRB5,3X10RFR
510 312105-0364 6 SCREW M6S ISO 4017 M6X10 A480 630 315105-0165 16 WASHER BRB8,4X16RFR
620 315105-0153 12 WASHER BRB6,4X12RFR 640 315105-0173 10 WASHER BRB10,5X22RFR
FEEDSIDE = RIGHT 2 LAYER 650 315705-0265 1 PARALLEL KEY W. ROUND ENDS 8X7X25 MM
250 2666283-0000 1 STOP 660 315705-0270 1 PARALLEL KEY W. ROUND ENDS 8X7X40 MM
510 312105-0364 2 SCREW M6S ISO 4017 M6X10 A480 B158 90232-0117 1 PH.CELL WT4-2P135S10
620 315105-0153 8 WASHER BRB6,4X12RFR
Common Parts
020 531499-0000 1 BEARING SLEEVE
030 547191-0002 2 SPACER
040 547194-0000 1 SCREW
050 589663-0000 1 JOINT PIECE
060 589664-0000 1 COVERING PLATE
080 722904-0000 1 WHEEL
090 722905-0000 1 SHAFT
100 722906-0000 1 HUB
110 722907-0000 1 BEARING CONSOLE
120 722908-0000 1 COVER
130 722909-0000 2 SUPPORT
150 722936-0000 1 SPROCKET
160 723857-0000 1 STEERING
170 1086180-0000 16 SLEEVE
180 1086223-0000 1 SPACER PIECE
190 1086383-0000 1 JOINT PIECE
200 1353500-0000 1 SLIDE RAIL
210 1353501-0000 1 SLIDE RAIL
Tetra Pak 674851-1800 CONVEYING EQUIPMENT 674801-1200 Pos. 110 2581870-0100 1-61 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581870-0100 Pos. 010 STOP Drawing file: 2603999-1_1_AC.hpgl
1-62 (68)
ECM: 204884 - 20050224
FEEDSIDE = LEFT 630 315105-0136 4 WASHER BRB4,3XRFR
150 2604039-0000 1 BRACKET 640 315105-0153 16 WASHER BRB6,4X12RFR
FEEDSIDE = RIGHT 650 315105-0165 12 WASHER BRB8,4X16RFR
150 2604008-0000 1 BRACKET 660 315105-0173 4 WASHER BRB10,5X22RFR
Common Parts 670 315400-0001 M 8 TUBE PUN-H-6X1-BL
010 548930-0000 2 BRACKET 680 315755-0106 2 RETAINING RING SHAFT DIN 6799 4 A2
020 722918-0000 1 BRACKET 690 321111-0306 2 FLANGE BUSHING, 20X26X25 MM
030 722919-0000 1 BRACKET B155.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
040 722997-0000 2 ARM B155.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
050 975054-0000 2 ROLL B156.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
090 975327-0000 2 LINK ARM
100 975328-0000 2 SHAFT
110 975329-0000 2 WASHER
120 975332-0000 1 STRUT
130 2604000-0000 1 BRACKET
140 2604007-0000 1 BRACKET
160 2604019-0000 1 SPACER
170 2614192-0000 2 SHAFT
180 2614193-0000 1 BRACKET
190 2614194-0000 1 BRACKET
200 2614212-0000 2 STOP PLATE
210 2636156-0000 1 SPACER
330 90459-2650 1 SWIVEL FLANGE 32
500 312105-0297 2 SCREW M6S ISO 4017 M4X25 A470
510 312105-0301 2 SCREW M6S ISO 4017 M4X35 A470
520 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
530 312105-0370 4 SCREW M6S ISO 4017 M6X20 A480
540 312105-0372 8 SCREW M6S ISO 4017 M6X25 A480
550 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
560 312105-0460 6 SCREW M6S ISO 4014 M8X45 A480
570 312105-0505 2 SCREW M6S ISO 4014 M10X70 A480
580 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
590 312155-0453 2 SCREW DIN 7991 MF6S M8X25 A480
600 312155-0457 4 SCREW DIN 7991 MF6S M8X35 A480
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 150 PROTECTION Drawing file: 2604045-1_1_AC.hpgl
1-64 (68)
ECM: 197031 - 20041220
Assembly Drawing: 2604045-1_1_AC This list covers pages from 1-64 to 1-67
FEEDSIDE = LEFT 1 LAYER (See drawing on page: 1-66) 540 312105-0333 20 SCREW M6S ISO 4017 M5X25 A480
060 740654-0000 42 SPACER 555 312105-0366 3 SCREW M6S ISO 4017 M6X12 A480
070 2614171-0000 1 TUNNEL 560 312105-0368 6 SCREW M6S ISO 4017 M6X16 A480
090 2614172-0000 1 COVER 610 312812-0314 42 HEXAGON NUT, NY-LOCK M5 A480
100 2614174-0000 1 COVER 620 315105-0146 58 WASHER BRB5,3X10RFR
120 2604046-0000 2 HINGE 630 315105-0153 17 WASHER BRB6,4X12RFR
140 2614173-0000 1 FRAME 640 315125-0146 40 WASHER TBRSB 5.3X15X1 A4
170 2614177-0000 1 PLATE FEEDSIDE = RIGHT 2 LAYER (See drawing on page: 1-64)
180 2703577-0000 1 BRACKET 060 740654-0000 32 SPACER
300 90015-0032 42 LEAD-IN BUSHING 090 2604042-0000 1 COVER
520 312105-0331 10 SCREW M6S ISO 4017 M5X20 A480 120 2604046-0000 1 HINGE
540 312105-0333 20 SCREW M6S ISO 4017 M5X25 A480 300 90015-0032 32 LEAD-IN BUSHING
610 312812-0314 42 HEXAGON NUT, NY-LOCK M5 A480 555 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
620 315105-0146 58 WASHER BRB5,3X10RFR 560 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
630 315105-0153 17 WASHER BRB6,4X12RFR 610 312812-0314 40 HEXAGON NUT, NY-LOCK M5 A480
640 315125-0146 40 WASHER TBRSB 5.3X15X1 A4 620 315105-0146 56 WASHER BRB5,3X10RFR
FEEDSIDE = LEFT 2 LAYER (See drawing on page: 1-66) 630 315105-0153 14 WASHER BRB6,4X12RFR
060 740654-0000 32 SPACER 640 315125-0146 30 WASHER TBRSB 5.3X15X1 A4
090 2614172-0000 1 COVER Common Parts
120 2604046-0000 1 HINGE 010 549809-0000 2 ANGLE
300 90015-0032 32 LEAD-IN BUSHING 020 549810-0000 2 SCREW
520 312105-0331 2 SCREW M6S ISO 4017 M5X20 A480 030 549811-0000 2 SPACER
540 312105-0333 18 SCREW M6S ISO 4017 M5X25 A480 040 549812-0000 2 HOLDER
555 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480 050 549815-0000 4 BRACKET
560 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480 080 2604041-0000 1 PLATE
610 312812-0314 40 HEXAGON NUT, NY-LOCK M5 A480 110 2604044-0000 2 HOLDER
620 315105-0146 56 WASHER BRB5,3X10RFR 130 2604047-0000 1 FRAME
630 315105-0153 14 WASHER BRB6,4X12RFR 150 2614168-0000 1 FRAME
640 315125-0146 30 WASHER TBRSB 5.3X15X1 A4 160 2614169-0000 2 BRACKET
FEEDSIDE = RIGHT 1 LAYER (See drawing on page: 1-64) 190 2703578-0000 2 COVERING PLATE
060 740654-0000 42 SPACER 200 2703579-0000 2 BRACKET
070 2604033-0000 1 TUNNEL 310 90044-0311 2 KEY FOR SAFETY SWITCH, AZ15/16 B2
090 2604042-0000 1 COVER 320 90051-0066 2 HANDLES,KNOB,INTERNAL THREAD M6-25X22.5
100 2604043-0000 1 COVER 330 90347-0011 2 VIBRATION DAMPER MEGI 781056
120 2604046-0000 2 HINGE 340 90347-0059 2 DAMPER
140 2604048-0000 1 FRAME 350 90458-0306 2 CABLE GLAND, M16X1,5, NO.5311 1010
170 2614175-0000 1 PLATE 500 312105-0327 8 SCREW M6S ISO 4017 M5X12 A480
180 2703577-0000 1 BRACKET 510 312105-0329 8 SCREW M6S ISO 4017 M5X16 A480
300 90015-0032 42 LEAD-IN BUSHING 530 312105-0332 6 SCREW M6S ISO 4017 M5X22 A480
Tetra Pak 674851-1800 PROTECTION 674801-1200 Pos. 150 2604045-0100 1-65 (68)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674801-1200 Pos. 150 PROTECTION Drawing file: 2604045-2_1_AC.hpgl
1-66 (68)
ECM: 197031 - 20041220
Common Parts (Cont'd)
552 312105-0364 4 SCREW M6S ISO 4017 M6X10 A480
570 312105-0372 2 SCREW M6S ISO 4017 M6X25 A480
580 312155-0327 8 SCREW DIN 7991 MF6S M5X12 A480
590 312155-0329 4 SCREW DIN 7991 MF6S M5X16 A480
600 312630-0316 2 HEX.NUT FINE, EN 24032 M6M M6X0,75 FZB8
B142 90459-1194 1 KEY SAF.SW. AZ16-03 ZVRK-M16
B143 90459-1194 1 KEY SAF.SW. AZ16-03 ZVRK-M16
Tetra Pak 674851-1800 PROTECTION 674801-1200 Pos. 150 2604045-0100 1-67 (68)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 SEALING UNIT 674851-1800 Pos. 020

2-1 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 020 SEALING UNIT Drawing file: 674802-10_1_AB.hpgl
2-2 (36)
ECM: 191033 - 20041115
-
010 2636125-0100 1 FRAMEWORK ...................................................................2-5
020 2666268-0100 1 PIVOT ARM ....................................................................... 2-7
030 2666175-0100 1 SEALING JAW ................................................................ 2-11
040 486926-0200 1 FILM CATCH ................................................................... 2-19
050 278663-0300 1 LIFTER .............................................................................2-21
060 2666182-0100 1 FAN ..................................................................................2-23
070 1353969-0100 1 TCIS KIT .......................................................................... 2-27
080 589650-0100 1 CONTACT LINK .............................................................. 2-29
090 1516114-0100 1 CABLE ............................................................................. 2-31
100 723919-0100 1 GUIDE ROLLER .............................................................. 2-33
110 1516115-0000 1 CONNECTION BOX TCIS
S106 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
S111 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
Tetra Pak 674851-1800 SEALING UNIT 674851-1800 Pos. 020 674802-1300 2-3 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 010 FRAMEWORK Drawing file: 2636125-1_1_AA.hpgl
2-4 (36)
ECM: 153353 - 20031218
-
010 573481-0000 1 SIGN
020 573482-0000 1 SIGN
040 723906-0000 2 BRACKET
050 723957-0000 1 PROTECTION
060 1353508-0000 1 PANEL
070 2604003-0000 1 PROTECTION
080 2604004-0000 1 PROTECTION
090 2604023-0000 1 FRAME LEFT
100 2604024-0000 1 FRAME RIGHT
110 2636127-0000 1 PANEL
120 2636144-0000 1 BEAM
130 2636821-0000 1 SHEET
310 90458-0305 4 CABLE GLAND, M12X1,5, NO.5311 1000
320 90458-0306 2 CABLE GLAND, M16X1,5, NO.5311 1010
330 90458-1508 2 FLOOR PLATE, DAMPER, M105-20-160
500 311520-0440 8 RIVET, BLANK 3,2X12
510 312105-0364 10 SCREW M6S ISO 4017 M6X10 A480
520 312105-0370 2 SCREW M6S ISO 4017 M6X20 A480
530 312105-0447 6 SCREW M6S ISO 4017 M8X12 A480
540 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
550 312105-0491 6 SCREW M6S ISO 4017 M10X20 A480
560 312125-0285 2 SCREW ISO 1207 M4X6 A4
570 312155-0323 8 SCREW DIN 7991 MF6S M5X8 A480
580 312155-0368 4 SCREW DIN 7991 MF6S M6X16 A480
590 315105-0153 12 WASHER BRB6,4X12RFR
600 315105-0165 8 WASHER BRB8,4X16RFR
610 315105-0173 6 WASHER BRB10,5X22RFR
Tetra Pak 674851-1800 FRAMEWORK 674802-1300 Pos. 010 2636125-0100 2-5 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 020 PIVOT ARM Drawing file: 2666268-1_1_AA.hpgl
2-6 (36)
ECM: 192214 - 20041115
-
010 2666278-0100 1 WARNING LAMP .............................................................. 2-9
020 2666269-0000 1 BEARING
030 2666270-0000 1 BEARING
040 2666271-0000 1 ARM
050 2666272-0000 1 ARM
500 312105-0291 2 SCREW M6S ISO 4017 M4X12 A470
510 312105-0364 4 SCREW M6S ISO 4017 M6X10 A480
520 312105-0372 4 SCREW M6S ISO 4017 M6X25 A480
530 312115-0451 3 SCREW ISO4762 M8X20 A4
540 312115-0460 1 SCREW ISO4762 M8X45 A4
550 312155-0461 2 SCREW DIN 7991 MF6S M8X50 A480
560 315105-0136 2 WASHER BRB4,3XRFR
570 315105-0153 8 WASHER BRB6,4X12RFR
580 321158-0420 2 FLANGE BUSHING, 40X44X40 MM
Tetra Pak 674851-1800 PIVOT ARM 674802-1300 Pos. 020 2666268-0100 2-7 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666268-0100 Pos. 010 WARNING LAMP Drawing file: 2666278-1_1_AA.hpgl
2-8 (36)
ECM: 161244 - 20040614
-
010 2690094-0000 1 RING
050 90458-0295 1 LIGHT ELEMENT, BLUE, KL70-401L
060 90458-0294 1 LIGHT ELEMENT, YELLOW, KL70-401Y
070 90458-0293 1 LIGHT ELEMENT, RED, KL70-401R
090 90458-0297 1 BASE WITH TUBE 110 MM KA70-1011
110 90015-0023 1 LEAD-IN, TET7-10, E-1458019
120 90036-0068 3 BULB 6.5W 24V
150 315105-0146 2 WASHER BRB5,3X10RFR
210 312115-0327 2 SCREW ISO4762 M5X12 A4
H101 90458-0292 1 BASE, KT70-1001
Tetra Pak 674851-1800 WARNING LAMP 2666268-0100 Pos. 010 2666278-0100 2-9 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 030 SEALING JAW Drawing file: 2666175-1_1_AB.hpgl
2-10 (36)
ECM: 186907 - 20041115
-
010 2666173-0100 1 DOLLY JAW .................................................................... 2-13
020 2666174-0100 1 DOLLY ..............................................................................2-15
030 436304-0000 2 RACK GEAR
040 436308-0000 1 STEERING RAIL
050 436309-0000 1 STEERING RAIL
060 548599-0000 4 WASHER
070 2666183-0000 2 BRACKET
080 582350-0000 2 HOLDER
300 90459-0399 2 BRACKET, REAR, EYE WITH AXLE 32
310 90459-3355 2 SWIVEL FLANGE 32
330 90458-2445 2 CHECK VALVE G1/8"
500 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
505 312115-0331 6 SCREW ISO4762 M5X20 A4
510 312105-0449 4 SCREW M6S ISO 4017 M8X16 A480
515 315105-0165 4 WASHER BRB8,4X16RFR
520 350003-0005 4 PUSH-IN FITTING QS-F-G1/8-6-I
535 312105-0297 4 SCREW M6S ISO 4017 M4X25 A470
540 312105-0329 4 SCREW M6S ISO 4017 M5X16 A480
545 315105-0136 4 WASHER BRB4,3XRFR
550 315105-0146 4 WASHER BRB5,3X10RFR
555 315400-0001 M 16 TUBE PUN-H-6X1-BL
560 315400-0004 M 6 TUBE PUN-H-8X1,25-BL
B104.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B104.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
B105 90459-2391 1 PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE
Tetra Pak 674851-1800 SEALING JAW 674802-1300 Pos. 030 2666175-0100 2-11 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666175-0100 Pos. 010 DOLLY JAW Drawing file: 2666173-1_1_AA.hpgl
2-12 (36)
ECM: 163028 - 20040614
-
010 269855-0000 1 KNIFE
020 283970-0000 1 KNIFE HOLDER
030 283971-0000 1 KNIFE HOLDER
040 436303-0000 1 BEAM
050 436312-0000 2 BRACKET
060 436324-0000 1 SHEET
070 436325-0000 1 PIPE
080 436326-0000 2 HOLDER
090 436327-0000 1 SHAFT
100 436328-0000 2 BARRIER
110 436329-0000 1 PLATE
120 436678-0000 1 SHAFT
130 479778-0000 1 DOLLY JAW
140 479779-0000 2 HOLDER
150 284503-0000 4 WASHER
160 284504-0000 2 GUIDE SHAFT
170 284505-0000 4 GUIDE SHAFT
180 479785-0000 2 WASHER
300 90143-0061 M 1 STRIP
310 90224-0016 1 CONNECTION
320 90458-2956 4 ELBOW PIPE JOINT, EXT.THREAD, D=6MM-G1/8
330 90459-4126 2 DOUBLE ACTING, MINI-ISO, CYL. 25-12
500 312105-0325 8 SCREW M6S ISO 4017 M5X10 A480
505 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
510 312105-0449 7 SCREW M6S ISO 4017 M8X16 A480
515 312111-0341 4 SCREW HEX.SOCK.HD.MC6S-TT 5X50 88 FZB
520 312115-0325 10 SCREW ISO4762 M5X10 A4
525 312115-0368 2 SCREW ISO4762 M6X16 A4
530 312115-0379 4 SCREW ISO4762 M6X45 A4
535 312125-0289 2 SCREW ISO 1207 M4X10 A4
540 315105-0136 2 WASHER BRB4,3XRFR
545 315105-0153 4 WASHER BRB6,4X12RFR
550 315105-0165 8 WASHER BRB8,4X16RFR
560 321105-0163 2 BEAR. BUSH. WITHOUT FL, 10X16X10 MM
570 315400-0001 M 1 TUBE PUN-H-6X1-BL
Tetra Pak 674851-1800 DOLLY JAW 2666175-0100 Pos. 010 2666173-0100 2-13 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666175-0100 Pos. 020 DOLLY Drawing file: 2666174-1_1_AA.hpgl
2-14 (36)
ECM: 163027 - 20040614
-
010 541581-0000 1 MOUNTING BAR
020 2666177-0000 1 SIDE PLATE
030 2666178-0000 1 SIDE PLATE
040 2666176-0000 2 AXLE PIN
050 266252-0000 8 ROLL
060 284509-0000 5 SHAFT
070 436310-0000 2 GEAR WHEEL
080 436311-0000 1 SHAFT
090 479783-0000 4 SHAFT
100 479786-0000 8 WASHER
110 479787-0000 4 SHAFT
120 548599-0000 5 WASHER
500 312105-0291 8 SCREW M6S ISO 4017 M4X12 A470
510 312105-0374 6 SCREW M6S ISO 4014 M6X30 A480
520 312105-0451 8 SCREW M6S ISO 4017 M8X20 A480
530 312605-0316 5 HEXAGON NUT, M6M M6 A280
550 315105-0153 6 WASHER BRB6,4X12RFR
560 315105-0165 8 WASHER BRB8,4X16RFR
570 315105-0173 2 WASHER BRB10,5X22RFR
R101 284518-0201 1 TPC-BAR ......................................................................... 2-17
Tetra Pak 674851-1800 DOLLY 2666175-0100 Pos. 020 2666174-0100 2-15 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666174-0100 Pos. R101 TPC-BAR Drawing file: 284518-2_1_AA.tif
2-16 (36)
ECM: --
-
010 269493-0000 1 RAIL
020 256884-0000 2 CONTACT PLATE
030 283067-0000 2 CONTACT LINK
035 90144-0043 MM 1 TAPE TYGAFLOR 108AP/03T 16X0,075X30M
050 90367-0004 2 RIVET
Tetra Pak 674851-1800 TPC-BAR 2666174-0100 Pos. R101 284518-0201 2-17 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 040 FILM CATCH Drawing file: 486926-1_1_AB.hpgl
2-18 (36)
ECM: 162739 - 20040614
-
010 451404-0000 1 SHAFT STAINLESS
020 457289-0000 2 BARRIER
030 486924-0000 1 HOLDER
040 486925-0000 1 HOLDER
050 486950-0000 1 SHAFT
060 312105-0449 2 SCREW M6S ISO 4017 M8X16 A480
070 312318-0364 4 SCREW ISO4029 M6X10 A4
080 315105-0165 2 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 FILM CATCH 674802-1300 Pos. 040 486926-0200 2-19 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 050 LIFTER Drawing file: 278663-1_1_AB.hpgl
2-20 (36)
ECM: 162737 - 20040614
-
010 533514-0000 1 STEERING RAIL
020 278665-0000 1 SHEET
030 278666-0000 1 PLATE
040 278667-0000 4 ROLL
050 278668-0000 1 BOW CLAMP
060 278669-0000 1 HOLDER
070 278670-0000 1 ROLL
080 278671-0000 1 PIPE
090 278672-0000 1 KNOB
100 90319-0004 MM 1300 ROPE
110 90347-0011 2 VIBRATION DAMPER MEGI 781056
120 312101-0327 2 SCREW M6S M5X12 FZB
130 312101-0329 4 SCREW M6S M5X16 FZB
140 312101-0366 2 SCREW M6S M6X12 FZB
150 312145-0327 2 SCREW ISO 2009 MFS M5X12 A4
155 312155-0327 2 SCREW DIN 7991 MF6S M5X12 A480
160 312180-0368 4 SCREW ISO7379 H6X16
170 312180-0378 1 SCREW ISO7379 H6X40
180 312601-0314 4 HEXAGON NUT, DIN 934 M5 8 FZB
190 315101-0146 14 WASHER PLAIN, BRB, 5,3/10 H=1
200 315101-0153 2 WASHER PLAIN, BRB, 6,4/12 H=1,5
Tetra Pak 674851-1800 LIFTER 674802-1300 Pos. 050 278663-0300 2-21 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 060 FAN Drawing file: 2666182-1_1_AA.hpgl
2-22 (36)
ECM: 162741 - 20040614
-
500 312105-0291 8 SCREW M6S ISO 4017 M4X12 A470
510 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
530 315105-0136 8 WASHER BRB4,3XRFR
540 315105-0153 4 WASHER BRB6,4X12RFR
M108 90264-0032 1 FAN PAPST 220V 18W
M109 90264-0032 1 FAN PAPST 220V 18W
X110 2666276-0100 1 CONNECTION BOX ........................................................ 2-25
Tetra Pak 674851-1800 FAN 674802-1300 Pos. 060 2666182-0100 2-23 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2-24 (36)
ECM: 161244 - 20040614
-
010 2694050-0000 1 CONNECTION BOX
320 90135-0026 2 EARTH TERMINAL, 3802.6
330 90458-0306 1 CABLE GLAND, M16X1,5, NO.5311 1010
340 90458-0308 1 CABLE GLAND, M25X1,5, NO.5311 1030
500 312125-0285 2 SCREW ISO 1207 M4X6 A4
510 312125-0295 2 SCREW ISO 1207 M4X20 A4
520 312605-0312 2 HEXAGON NUT, M6M M4 A280
530 315105-0136 4 WASHER BRB4,3XRFR
540 351162-0104 M 2 CABLE AWM 1X1,5 MM2 YELLOW-GREEN
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 070 TCIS KIT Drawing file: 1353969-1_1_AB.hpgl
2-26 (36)
ECM: 162735 - 20040614
-
010 596936-0000 1 BRACKET
020 1516110-0000 1 BRACKET
030 589657-0000 1 SHEET
040 1516111-0000 1 SUPPORT
050 596935-0000 1 BRACKET
060 1516112-0000 1 CABLE CLAMP
100 312105-0331 2 SCREW M6S ISO 4017 M5X20 A480
110 312105-0339 2 SCREW M6S ISO 4014 M5X40 A480
120 312105-0366 6 SCREW M6S ISO 4017 M6X12 A480
130 312105-0380 2 SCREW M6S ISO 4014 M6X50 A480
140 312109-0335 2 SCREW M6S ISO 4017 M5X30 A480
150 312155-0376 4 SCREW DIN 7991 MF6S M6X35 A480
160 312105-0291 1 SCREW M6S ISO 4017 M4X12 A470
170 312105-0323 2 SCREW M6S ISO 4017 M5X8 A480
240 315105-0136 1 WASHER BRB4,3XRFR
250 315105-0146 10 WASHER BRB5,3X10RFR
260 315105-0153 10 WASHER BRB6,4X12RFR
Tetra Pak 674851-1800 TCIS KIT 674802-1300 Pos. 070 1353969-0100 2-27 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 080 CONTACT LINK Drawing file: 589650-1_1_AC.hpgl
2-28 (36)
ECM: 162740 - 20040614
-
010 589654-0000 1 CONTACT LINK
020 589653-0000 1 CONTACT LINK
030 589655-0000 DRILLING JIG
040 596953-0000 2 INSULATING HOLDER
100 312115-0325 4 SCREW ISO4762 M5X10 A4
110 312125-0289 2 SCREW ISO 1207 M4X10 A4
120 312502-0169 2 DRIVE SCREW ROUND HEAD KDS 2X5
130 315105-0136 2 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 CONTACT LINK 674802-1300 Pos. 080 589650-0100 2-29 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 090 CABLE Drawing file: 1516114-1_1_AB.hpgl
2-30 (36)
ECM: 162738 - 20040614
-
010 1353960-0000 1 BUSBAR
010 1353960-0000 1 BUSBAR
050 1516107-0000 1 CABLE HOLDER
060 1516108-0000 1 CABLE HOLDER
100 28509-0000 2 WASHER
110 32079-0000 2 WASHER
120 32544-0000 1 INSULATION NUT
130 32546-0001 1 ISOLATION NUT
140 32644-0000 1 WASHER
150 1516109-0000 2 WASHER
200 90181-0199 1 FLEXIBLE CHAIN, LINK 15
210 90181-0202 1 FLEXIBLE CHAIN, BRACKET 1015. 1PZ
220 90181-0203 1 FLEXIBLE CHAIN, BRACKET 1015. 2PZ
300 312105-0297 1 SCREW M6S ISO 4017 M4X25 A470
350 312115-0374 1 SCREW ISO4762 M6X30 A4
370 312155-0331 4 SCREW DIN 7991 MF6S M5X20 A480
450 315103-0165 2 WASHER PLAIN, BRB, 8,4/16,H=1,5 NIPL BR
500 315105-0146 4 WASHER BRB5,3X10RFR
Tetra Pak 674851-1800 CABLE 674802-1300 Pos. 090 1516114-0100 2-31 (36)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. 100 GUIDE ROLLER Drawing file: 723919-1_1_AB.hpgl
2-32 (36)
ECM: 163165 - 20040614
-
010 723918-0000 2 REEL HOLDER
020 522350-0000 2 RING
050 90014-0017 1 DRIVE ROLLER, NO. 2602-20-6-530
070 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
090 315105-0153 2 WASHER BRB6,4X12RFR
120 315202-0215 2 O-RING 19,2X3 MM
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674802-1300 Pos. S106 EMERGENCY STOP Drawing file: 2666280-1_1_AB.hpgl
2-34 (36)
ECM: 190812 - 20041115
-
010 2659245-0000 1 BRACKET
300 90458-0307 1 CABLE GLAND, M20X1,5, NO.5311 1020
310 90459-1130 1 EM. STOP XAL-K178F
510 312125-0289 2 SCREW ISO 1207 M4X10 A4
520 315105-0146 4 WASHER BRB5,3X10RFR
530 353250-0020 1 GLAND, LOCKNUT M20X1,5
540 312105-0327 4 SCREW M6S ISO 4017 M5X12 A480
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 SHRINK UNIT 674851-1800 Pos. 030

3-1 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 030 SHRINK UNIT Drawing file: 674803-8_1_AB.hpgl
3-2 (88)
ECM: 205481 - 20050302
LONG OVEN GROUPING BELT
010 547115-0400 2 ELEMENT GROUP .................................................... 3-5, 3-7
130 2659258-0100 1 GROUPING BELT ........................................................... 3-11
LONG OVEN NO GROUPING BELT
010 547115-0400 2 ELEMENT GROUP .................................................... 3-5, 3-7
SHORT OVEN NO GROUPING BELT
010 547115-0400 1 ELEMENT GROUP .................................................... 3-5, 3-7
Common Parts
030 451497-0300 1 GUIDE ROLLER .............................................................. 3-29
040 266255-0100 1 CONDUCTING ROLLER ................................................. 3-31
050 266257-0600 1 DRIVE UNIT ........................................................... 3-33, 3-35
060 266265-0100 1 GUIDE ROLLER .............................................................. 3-37
065 451498-0300 1 GUIDE ROLLER .............................................................. 3-39
070 266286-0800 1 HEATER ASSEMBLY ............................................. 3-41, 3-43
100 2694051-0100 1 FRAMEWORK ........................................................3-61, 3-63
110 493628-0700 1 COVERING PLATE ................................................ 3-67, 3-69
120 2656146-0100 1 REGULATOR .................................................................. 3-71
140 2656148-0100 1 VALVE PANEL .................................................................3-77
150 2686758-0100 1 SPEED REGULATOR VALVE ........................................ 3-83
X102 2659230-0100 1 CONNECTION BOX ........................................................ 3-85
X103 2666274-0100 1 CONNECTION BOX ........................................................ 3-87
Tetra Pak 674851-1800 SHRINK UNIT 674851-1800 Pos. 030 674803-1200 3-3 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 010 ELEMENT GROUP Drawing file: 547115-1_1_AA.tif
3-4 (88)
ECM: 197029 - 20041220
50HZ LONG OVEN 060 547116-0000 1 COVER
010 269697-0400 6 TUBE HEATER ELEMENT ............................................... 3-9 070 547117-0000 1 SHEET
020 1 90264-0337 2 FAN ROTOR R67 F1 250X 71 L-E 5E/14 100 2694052-0000 1 CONNECTION BOX
030 1 90264-0327 2 CONE / ED 2/250 120 464751-0000 16 MOUNTING SHEET
050 464750-0000 2 SHEET 140 269692-0000 1 INSULATION
060 547116-0000 2 COVER 150 450799-0000 1 FLANGE
070 547117-0000 2 SHEET 160 450800-0000 1 INSULATING DISK
100 2694052-0000 2 CONNECTION BOX 170 450886-0000 6 FLANGE
120 464751-0000 32 MOUNTING SHEET 180 464754-0000 1 SLEEVE
140 269692-0000 2 INSULATION 190 538229-0000 1 INSULATING DISK
150 450799-0000 2 FLANGE 200 547118-0000 1 SHAFT
160 450800-0000 2 INSULATING DISK 260 90062-0021 6 LOCK WASHER DIN 6797 TYPE A 5,3
170 450886-0000 12 FLANGE 270 90097-0023 5 CABLE SHOE
180 464754-0000 2 SLEEVE 275 359705-0015 1 WARNING SIGN ISO, RISK OF ELECTRIC SHOCK
190 538229-0000 2 INSULATING DISK 280 90195-0028 2 TERM.BLOCK 6-POLE STEATIT
200 547118-0000 2 SHAFT 290 90195-0029 2 CONN. LINK NO324 FOR -28
260 90062-0021 12 LOCK WASHER DIN 6797 TYPE A 5,3 330 311520-0429 64 RIVET, BLANK 3,2X8
270 90097-0023 10 CABLE SHOE 350 312105-0329 8 SCREW M6S ISO 4017 M5X16 A480
275 359705-0015 2 WARNING SIGN ISO, RISK OF ELECTRIC SHOCK 360 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
280 90195-0028 4 TERM.BLOCK 6-POLE STEATIT 390 312121-0349 2 SCREW ISO 1207 M5X90 4.8 - 5.8 Z.PL.
290 90195-0029 4 CONN. LINK NO324 FOR -28 400 312125-0366 4 SCREW ISO 1207 M6X12 A4
330 311520-0429 128 RIVET, BLANK 3,2X8 420 312318-0362 1 SCREW ISO4029 M6X8 A4
350 312105-0329 16 SCREW M6S ISO 4017 M5X16 A480 450 312605-0314 2 HEXAGON NUT, M6M M5 A280
360 312105-0366 8 SCREW M6S ISO 4017 M6X12 A480 460 312602-0318 12 HEXAGON NUT, EN 24032 M6M M8 NIPLBR
390 312121-0349 4 SCREW ISO 1207 M5X90 4.8 - 5.8 Z.PL. 480 315105-0146 10 WASHER BRB5,3X10RFR
400 312125-0366 8 SCREW ISO 1207 M6X12 A4 490 315105-0153 4 WASHER BRB6,4X12RFR
420 312318-0362 2 SCREW ISO4029 M6X8 A4 500 315105-0165 12 WASHER BRB8,4X16RFR
450 312605-0314 4 HEXAGON NUT, M6M M5 A280 520 315701-0202 1 PARALLEL KEY W. ROUND ENDS 5X5X22 MM
460 312602-0318 24 HEXAGON NUT, EN 24032 M6M M8 NIPLBR 550 315750-0131 1 RETAINING RING SHAFT DIN 471 ST 50
480 315105-0146 20 WASHER BRB5,3X10RFR 580 90458-0309 1 CABLE GLAND, M32X1,5, NO.5311 1040
500 315105-0165 24 WASHER BRB8,4X16RFR 60HZ LONG OVEN
520 315701-0202 2 PARALLEL KEY W. ROUND ENDS 5X5X22 MM 010 269697-0400 6 TUBE HEATER ELEMENT .............................................. 3-9
550 315750-0131 2 RETAINING RING SHAFT DIN 471 ST 50 020 2 90264-0338 2 FAN ROTOR R67 F1 225X 71 L-E 5E/14
580 90458-0309 2 CABLE GLAND, M32X1,5, NO.5311 1040 030 2 90264-0339 2 CONE / 2/225
590 312812-0318 8 HEXAGON NUT, NY-LOCK M8 A480 050 464750-0000 2 SHEET
M102 90458-2462 1 MOTOR 3GVA072002-BSB 060 547116-0000 2 COVER
50HZ SHORT OVEN 070 547117-0000 2 SHEET
010 269697-0400 3 TUBE HEATER ELEMENT ............................................... 3-9 100 2694052-0000 2 CONNECTION BOX
020 1 90264-0337 1 FAN ROTOR R67 F1 250X 71 L-E 5E/14 120 464751-0000 32 MOUNTING SHEET
030 1 90264-0327 1 CONE / ED 2/250 140 269692-0000 2 INSULATION
050 464750-0000 1 SHEET 150 450799-0000 2 FLANGE
Tetra Pak 674851-1800 ELEMENT GROUP 674803-1200 Pos. 010 547115-0400 3-5 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 010 ELEMENT GROUP Drawing file: 547115-3_1_AA.tif
3-6 (88)
ECM: 197029 - 20041220
60HZ LONG OVEN (Cont'd) 200 547118-0000 1 SHAFT
160 450800-0000 2 INSULATING DISK 260 90062-0021 6 LOCK WASHER DIN 6797 TYPE A 5,3
170 450886-0000 12 FLANGE 270 90097-0023 5 CABLE SHOE
180 464754-0000 2 SLEEVE 275 359705-0015 1 WARNING SIGN ISO, RISK OF ELECTRIC SHOCK
190 538229-0000 2 INSULATING DISK 280 90195-0028 2 TERM.BLOCK 6-POLE STEATIT
200 547118-0000 2 SHAFT 290 90195-0029 2 CONN. LINK NO324 FOR -28
260 90062-0021 12 LOCK WASHER DIN 6797 TYPE A 5,3 330 311520-0429 64 RIVET, BLANK 3,2X8
270 90097-0023 10 CABLE SHOE 350 312105-0329 8 SCREW M6S ISO 4017 M5X16 A480
275 359705-0015 2 WARNING SIGN ISO, RISK OF ELECTRIC SHOCK 360 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
280 90195-0028 4 TERM.BLOCK 6-POLE STEATIT 390 312121-0349 2 SCREW ISO 1207 M5X90 4.8 - 5.8 Z.PL.
290 90195-0029 4 CONN. LINK NO324 FOR -28 400 312125-0366 4 SCREW ISO 1207 M6X12 A4
330 311520-0429 128 RIVET, BLANK 3,2X8 420 312318-0362 1 SCREW ISO4029 M6X8 A4
350 312105-0329 16 SCREW M6S ISO 4017 M5X16 A480 450 312605-0314 2 HEXAGON NUT, M6M M5 A280
360 312105-0366 8 SCREW M6S ISO 4017 M6X12 A480 460 312602-0318 12 HEXAGON NUT, EN 24032 M6M M8 NIPLBR
390 312121-0349 4 SCREW ISO 1207 M5X90 4.8 - 5.8 Z.PL. 480 315105-0146 10 WASHER BRB5,3X10RFR
400 312125-0366 8 SCREW ISO 1207 M6X12 A4 490 315105-0153 4 WASHER BRB6,4X12RFR
420 312318-0362 2 SCREW ISO4029 M6X8 A4 500 315105-0165 12 WASHER BRB8,4X16RFR
450 312605-0314 4 HEXAGON NUT, M6M M5 A280 520 315701-0202 1 PARALLEL KEY W. ROUND ENDS 5X5X22 MM
460 312602-0318 24 HEXAGON NUT, EN 24032 M6M M8 NIPLBR 550 315750-0131 1 RETAINING RING SHAFT DIN 471 ST 50
480 315105-0146 20 WASHER BRB5,3X10RFR 580 90458-0309 1 CABLE GLAND, M32X1,5, NO.5311 1040
500 315105-0165 24 WASHER BRB8,4X16RFR Common Parts
520 315701-0202 2 PARALLEL KEY W. ROUND ENDS 5X5X22 MM M101 90458-2462 1 MOTOR 3GVA072002-BSB
580 90458-0309 2 CABLE GLAND, M32X1,5, NO.5311 1040
M102 90458-2462 1 MOTOR 3GVA072002-BSB
60HZ SHORT OVEN
010 269697-0400 3 TUBE HEATER ELEMENT ............................................... 3-9
020 2 90264-0338 1 FAN ROTOR R67 F1 225X 71 L-E 5E/14
030 2 90264-0339 1 CONE / 2/225
050 464750-0000 1 SHEET
060 547116-0000 1 COVER
070 547117-0000 1 SHEET
100 2694052-0000 1 CONNECTION BOX
120 464751-0000 16 MOUNTING SHEET
140 269692-0000 1 INSULATION
150 450799-0000 1 FLANGE
160 450800-0000 1 INSULATING DISK
170 450886-0000 6 FLANGE
180 464754-0000 1 SLEEVE
190 538229-0000 1 INSULATING DISK
Tetra Pak 674851-1800 ELEMENT GROUP 674803-1200 Pos. 010 547115-0400 3-7 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
547115-0400 Pos. 010 TUBE HEATER ELEMENT Drawing file: 269697-2_1_AA.tif
3-8 (88)
ECM: 197030 - 20041220
LONG
R103 .1 269698-0000 1 WIRE ELEMENT
SHORT
R102 541572-0000 1 WIRE ELEMENT
Common Parts
020 269699-0000 32 INSULATING HOLDER
040 90006-0018 74 BUSHING
050 90097-0023 2 CABLE SHOE
Tetra Pak 674851-1800 TUBE HEATER ELEMENT 547115-0400 Pos. 010 269697-0400 3-9 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 130 GROUPING BELT Drawing file: 2659258-1_1_AA.hpgl
3-10 (88)
ECM: 153643 - 20031218
-
010 2581833-0100 1 GROUPING BELT ........................................................... 3-13
015 2581860-0100 1 SLIDE PLATE .................................................................. 3-21
020 2659254-0100 1 FRAME .............................................................................3-23
030 2659256-0100 1 FRAME .............................................................................3-27
040 578197-0000 8 SPACER
050 2581853-0000 1 PROTECTION PLATE
060 2581854-0000 1 SLIDE SHEET
070 2581855-0000 1 SUPPORT ARM
090 2636118-0000 1 PROTECTION
100 2581868-0000 1 STRUT
110 2581869-0000 2 SPACER
300 90143-0060 MM 100 EDGE STRIP 9,5X6,3MM BLACK PVC
500 312105-0325 8 SCREW M6S ISO 4017 M5X10 A480
510 312105-0327 4 SCREW M6S ISO 4017 M5X12 A480
520 312105-0368 6 SCREW M6S ISO 4017 M6X16 A480
530 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
540 312105-0509 2 SCREW M6S ISO 4014 M10X90 A480
550 312155-0376 8 SCREW DIN 7991 MF6S M6X35 A480
570 315105-0146 8 WASHER BRB5,3X10RFR
590 315105-0165 4 WASHER BRB8,4X16RFR
600 315105-0173 2 WASHER BRB10,5X22RFR
610 315125-0153 10 WASHER TBRSB 6,4X22X4 A4
Tetra Pak 674851-1800 GROUPING BELT 674803-1200 Pos. 130 2659258-0100 3-11 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2659258-0100 Pos. 010 GROUPING BELT Drawing file: 2581833-1_1_AA.hpgl
3-12 (88)
ECM: 121646 - 20030120
-
010 2581821-0100 1 DRIVE SHAFT ................................................................. 3-15
020 2581826-0100 1 SLIDE PLATE .................................................................. 3-17
030 2581843-0100 1 BENDING ROLLER ......................................................... 3-19
040 2581832-0000 1 CONVEYOR BELT
Tetra Pak 674851-1800 GROUPING BELT 2659258-0100 Pos. 010 2581833-0100 3-13 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581833-0100 Pos. 010 DRIVE SHAFT Drawing file: 2581821-1_1_AE.hpgl
3-14 (88)
ECM: 192303 - 20041115
Assembly Drawing: 2581821-1_1_AE
-
010 2581822-0000 5 SPROCKET
020 2581823-0000 1 SHAFT
030 2581824-0000 1 SHAFT
040 2581825-0000 1 SHAFT
050 2581827-0000 4 CAP
310 90091-0302 2 RADIAL SEAL 20X32X7 MM DUST LIP
320 90091-0322 2 RADIAL SEAL 25X42X7 MM DUST LIP
330 90458-0436 1 GLAND, EXTENDED WITH INSERT, M16X1,5
340 90458-0460 1 GLAND, LOCKNUT, M16X1,5
500 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
510 312105-0372 6 SCREW M6S ISO 4017 M6X25 A480
520 312105-0477 4 SCREW M6S ISO 4014 M8X130 A480
530 312318-0445 4 SCREW ISO4029 M8X10 A4
550 315105-0153 8 WASHER BRB6,4X12RFR
560 315105-0165 4 WASHER BRB8,4X16RFR
M115 90069-0237 1 GEARS, WORM MOTOR FL35G020464034083
Tetra Pak 674851-1800 DRIVE SHAFT 2581833-0100 Pos. 010 2581821-0100 3-15 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581833-0100 Pos. 020 SLIDE PLATE Drawing file: 2581826-1_1_AA.hpgl
3-16 (88)
ECM: 121644 - 20030120
-
010 2551501-0000 8 CAP
020 2581828-0000 1 SUPPORT
030 2581829-0000 1 SUPPORT
040 2581830-0000 1 SUPPORT
050 2581846-0000 4 BRACKET
500 312105-0453 8 SCREW M6S ISO 4017 M8X25 A480
510 312115-0457 8 SCREW ISO4762 M8X35 A4
520 312155-0453 8 SCREW DIN 7991 MF6S M8X25 A480
530 315105-0165 16 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 SLIDE PLATE 2581833-0100 Pos. 020 2581826-0100 3-17 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581833-0100 Pos. 030 BENDING ROLLER Drawing file: 2581843-1_1_AA.hpgl
3-18 (88)
ECM: 121645 - 20030120
-
010 2581844-0000 1 SHAFT
020 2581845-0000 1 ROLLER
500 321313-0103 2 BALL BEARING, 17X40X12MM
Tetra Pak 674851-1800 BENDING ROLLER 2581833-0100 Pos. 030 2581843-0100 3-19 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2659258-0100 Pos. 015 SLIDE PLATE Drawing file: 2581860-1_1_AC.hpgl
3-20 (88)
ECM: 148164 - 20031120
-
010 2581858-0000 1 STRUT
020 2581859-0000 1 SLIDE PLATE
030 2581885-0000 2 SPACER
500 312105-0327 2 SCREW M6S ISO 4017 M5X12 A480
510 312105-0374 4 SCREW M6S ISO 4014 M6X30 A480
520 312155-0370 2 SCREW DIN 7991 MF6S M6X20 A480
530 315105-0153 4 WASHER BRB6,4X12RFR
540 315125-0146 2 WASHER TBRSB 5.3X15X1 A4
Tetra Pak 674851-1800 SLIDE PLATE 2659258-0100 Pos. 015 2581860-0100 3-21 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2659258-0100 Pos. 020 FRAME Drawing file: 2659254-1_1_AA.hpgl
3-22 (88)
ECM: 153641 - 20031218
-
010 2581839-0100 1 SPRING PACKAGE .........................................................3-25
020 2581834-0000 4 ANGLE BRACKET
030 2581836-0000 1 GUIDE CONSOLE
040 2581852-0000 1 MOUNTING SHEET
050 2659255-0000 1 FRAME
500 312105-0370 4 SCREW M6S ISO 4017 M6X20 A480
510 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
520 312105-0493 4 SCREW M6S ISO 4017 M10X25 A480
530 312155-0493 4 SCREW DIN 7991 MF6S M10X25 A480
540 315105-0153 4 WASHER BRB6,4X12RFR
550 315105-0165 4 WASHER BRB8,4X16RFR
560 315105-0173 4 WASHER BRB10,5X22RFR
Tetra Pak 674851-1800 FRAME 2659258-0100 Pos. 020 2659254-0100 3-23 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2659254-0100 Pos. 010 SPRING PACKAGE Drawing file: 2581839-1_1_AC.hpgl
3-24 (88)
ECM: 202977 - 20050224
-
010 2581837-0000 1 SPRING
020 2581838-0000 1 WASHER
030 2581840-0000 1 BRACKET
040 2581841-0000 1 AXLE SUPPORT
050 2581842-0000 1 SHAFT
060 2581847-0000 1 BRACKET
070 2581862-0000 1 BUSHING
080 2581871-0000 1 BUSHING
300 90153-0047 1 ADHESIVE, MULTI-BOND 330; AKTIVATOR 738
500 312105-0462 4 SCREW M6S ISO 4014 M8X55 A480
510 312318-0447 1 SCREW ISO4029 M8X12 A4
525 315105-0165 4 WASHER BRB8,4X16RFR
530 315105-0178 1 WASHER BRB13X24RFR
Tetra Pak 674851-1800 SPRING PACKAGE 2659254-0100 Pos. 010 2581839-0100 3-25 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2659258-0100 Pos. 030 FRAME Drawing file: 2659256-1_1_AA.hpgl
3-26 (88)
ECM: 153642 - 20031218
-
010 2581839-0100 1 SPRING PACKAGE .........................................................3-25
020 2581831-0000 1 MOUNTING SHEET
030 2581834-0000 4 ANGLE BRACKET
040 2581836-0000 1 GUIDE CONSOLE
050 2659257-0000 1 FRAME
500 312105-0370 4 SCREW M6S ISO 4017 M6X20 A480
510 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
520 312105-0493 4 SCREW M6S ISO 4017 M10X25 A480
530 312155-0493 4 SCREW DIN 7991 MF6S M10X25 A480
540 315105-0153 4 WASHER BRB6,4X12RFR
550 315105-0165 4 WASHER BRB8,4X16RFR
560 315105-0173 4 WASHER BRB10,5X22RFR
Tetra Pak 674851-1800 FRAME 2659258-0100 Pos. 030 2659256-0100 3-27 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-28 (88)
ECM: --
-
010 451499-0000 1 SHAFT *DR
020 161219-0000 1 ROLL
030 722940-0000 2 PLATE
040 161141-0000 2 SPACER RING
070 722941-0000 4 SPACER
090 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
110 312105-0449 4 SCREW M6S ISO 4017 M8X16 A480
120 312318-0366 4 SCREW ISO4029 M6X12 A4
150 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 040 CONDUCTING ROLLER Drawing file: 266255-1_1_AB.hpgl
3-30 (88)
ECM: 153873 - 20031218
-
010 266256-0000 1 ROLL
020 90345-0011 2 FLANGE BEARING, 20X112X37,3 MM
030 312101-0493 4 SCREW M6S M10X25 FZB
Tetra Pak 674851-1800 CONDUCTING ROLLER 674803-1200 Pos. 040 266255-0100 3-31 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-32 (88)
ECM: 192065 - 20041115
50HZ 674851 LONG
005 1 161148-0000 1 SPROCKET
040 1 556147-0001 1 CONVEYOR BELT
060 1 266261-0000 1 SPROCKET
200 1 318202-0049 1 ROLLER CHAIN, SINGLE 1/2 -49
60HZ 674851 LONG
005 2 279909-0000 1 SPROCKET
040 1 556147-0001 1 CONVEYOR BELT
060 1 266261-0000 1 SPROCKET
50HZ 674851 SHORT
005 2 279909-0000 1 SPROCKET
040 2 556147-0002 1 CONVEYOR BELT
060 3 722535-0000 1 SPROCKET
60HZ 674851 SHORT
005 3 722534-0000 1 SPROCKET
040 2 556147-0002 1 CONVEYOR BELT
060 3 722535-0000 1 SPROCKET
Common Parts
010 266258-0000 1 DRIVE ROLLER
020 533532-0000 1 PLATE
030 533533-0000 1 PROTECTION
070 315125-0165 4 WASHER TBRSB 8,4X26X5 A4
100 312101-0325 4 SCREW M6S M5X10 FZB
110 312101-0453 4 SCREW M6S M8X25 FZB
120 312101-0493 4 SCREW M6S M10X25 FZB
90069-0405 1 COMPRESSION SPRING
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-34 (88)
ECM: 192065 - 20041115
50HZ 674851 LONG
005 1 161148-0000 1 SPROCKET
040 1 556147-0001 1 CONVEYOR BELT
060 1 266261-0000 1 SPROCKET
60HZ 674851 LONG
005 2 279909-0000 1 SPROCKET
040 1 556147-0001 1 CONVEYOR BELT
060 1 266261-0000 1 SPROCKET
50HZ 674851 SHORT
005 2 279909-0000 1 SPROCKET
040 2 556147-0002 1 CONVEYOR BELT
060 3 722535-0000 1 SPROCKET
60HZ 674851 SHORT
005 3 722534-0000 1 SPROCKET
040 2 556147-0002 1 CONVEYOR BELT
060 3 722535-0000 1 SPROCKET
Common Parts
010 266258-0000 1 DRIVE ROLLER
020 533532-0000 1 PLATE
030 533533-0000 1 PROTECTION
070 315125-0165 4 WASHER TBRSB 8,4X26X5 A4
100 312101-0325 4 SCREW M6S M5X10 FZB
110 312101-0453 4 SCREW M6S M8X25 FZB
120 312101-0493 4 SCREW M6S M10X25 FZB
90069-0405 1 COMPRESSION SPRING
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 060 GUIDE ROLLER Drawing file: 266265-1_1_AA.tif
3-36 (88)
ECM: --
-
010 161140-0000 1 SHAFT
020 161219-0000 1 ROLL
030 312101-0453 2 SCREW M6S M8X25 FZB
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-38 (88)
ECM: --
-
010 451499-0000 1 SHAFT *DR
020 161219-0000 1 ROLL
030 722940-0000 2 PLATE
070 722941-0000 4 SPACER
090 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
110 312105-0449 4 SCREW M6S ISO 4017 M8X16 A480
150 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 070 HEATER ASSEMBLY Drawing file: 266286-5_1_AA.tif
3-40 (88)
ECM: 204637 - 20050224
674851 LONG (See drawing on page: 3-40)
010 436685-0000 4 RAIL
020 266288-0000 12 SLIDE RAIL
092 266294-0000 1 FASTENING BRACKET
095 434694-0300 1 THROTTLE ......................................................................3-45
180 312156-0370 24 SCREW EN 10642 MF6S M6X20 A480
205 312811-0316 24 NUT HEX.LOCK HELI COIL MID GRIP M6 SS
230 315105-0153 32 WASHER BRB6,4X12RFR
674851 SHORT (See drawing on page: 3-42)
010 722493-0001 4 RAIL
020 722494-0001 8 SLIDE RAIL
095 434694-0300 2 THROTTLE ......................................................................3-45
180 312156-0370 16 SCREW EN 10642 MF6S M6X20 A480
230 315105-0153 24 WASHER BRB6,4X12RFR
250 315105-0171 2 WASHER BRB10X18
Common Parts
035 436321-0000 2 FRONT PLATE
040 266290-0000 2 MOUNTING BAR
050 266291-0000 2 MOUNTING BAR
057 574658-0000 1 LOGOTYPE TP
070 266292-0000 2 CURTAIN
080 161227-0400 1 SUPERSTRUCTURE ............................................. 3-47, 3-49
090 266273-0500 1 LOWER SECT.WELD.ASSEMBLY 3-51, 3-53, 3-55, 3-57
...........................................................................................3-59
100 90326-0012 2 PROTECTIVE COVER, T31A4618
120 90326-0306 1 GLAND FITTING 9041-45-KS-KR.1/8" D=4,5MM
122 311520-0435 4 RIVET, BLANK 3,2X10
130 312105-0327 2 SCREW M6S ISO 4017 M5X12 A480
150 312105-0376 4 SCREW M6S ISO 4014 M6X35 A480
160 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
170 312125-0323 8 SCREW ISO 1207 M5X8 A4
190 312503-0408 12 TAPPING SCREW ISO 7049-ST4,8X9,5-C-Z
200 312605-0316 4 HEXAGON NUT, M6M M6 A280
210 315105-0146 2 WASHER BRB5,3X10RFR
B150 90326-0015 1 THERMOCOUPLE, CR-AL NR. 12826-13
90326-0017 1 GLAND 1/8".REPL.BY 90326-306
90326-0032 1 CONE, 9041-45-KS/
X111 90326-0020 1 PLUG, FEMALE YELLOW CR-AL
Tetra Pak 674851-1800 HEATER ASSEMBLY 674803-1200 Pos. 070 266286-0800 3-41 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 070 HEATER ASSEMBLY Drawing file: 266286-6_1_AA.tif
3-42 (88)
ECM: 204637 - 20050224
010 436685-0000 4 RAIL
020 266288-0000 12 SLIDE RAIL
095 434694-0300 1 THROTTLE ......................................................................3-45
180 312156-0370 24 SCREW EN 10642 MF6S M6X20 A480
230 315105-0153 32 WASHER BRB6,4X12RFR
010 722493-0001 4 RAIL
020 722494-0001 8 SLIDE RAIL
095 434694-0300 2 THROTTLE ......................................................................3-45
180 312156-0370 16 SCREW EN 10642 MF6S M6X20 A480
230 315105-0153 24 WASHER BRB6,4X12RFR
250 315105-0171 2 WASHER BRB10X18
Common Parts
035 436321-0000 2 FRONT PLATE
040 266290-0000 2 MOUNTING BAR
050 266291-0000 2 MOUNTING BAR
057 574658-0000 1 LOGOTYPE TP
070 266292-0000 2 CURTAIN
080 161227-0400 1 SUPERSTRUCTURE ............................................. 3-47, 3-49
090 266273-0500 1 LOWER SECT.WELD.ASSEMBLY 3-51, 3-53, 3-55, 3-57
...........................................................................................3-59
100 90326-0012 2 PROTECTIVE COVER, T31A4618
120 90326-0306 1 GLAND FITTING 9041-45-KS-KR.1/8" D=4,5MM
122 311520-0435 4 RIVET, BLANK 3,2X10
130 312105-0327 2 SCREW M6S ISO 4017 M5X12 A480
150 312105-0376 4 SCREW M6S ISO 4014 M6X35 A480
160 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
170 312125-0323 8 SCREW ISO 1207 M5X8 A4
200 312605-0316 4 HEXAGON NUT, M6M M6 A280
210 315105-0146 2 WASHER BRB5,3X10RFR
B150 90326-0015 1 THERMOCOUPLE, CR-AL NR. 12826-13
90326-0017 1 GLAND 1/8".REPL.BY 90326-306
90326-0032 1 CONE, 9041-45-KS/
X111 90326-0020 1 PLUG, FEMALE YELLOW CR-AL
Tetra Pak 674851-1800 HEATER ASSEMBLY 674803-1200 Pos. 070 266286-0800 3-43 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 095 THROTTLE Drawing file: 434694-1_1_AA.tif
3-44 (88)
ECM: 192077 - 20041115
674851 LONG
010 434695-0000 1 THROTTLE
020 434696-0000 1 THROTTLE
674851 SHORT
010 533500-0000 1 THROTTLE
020 533501-0000 1 THROTTLE
Common Parts
050 434697-0000 2 CRANK
100 312105-0368 2 SCREW M6S ISO 4017 M6X16 A480
Tetra Pak 674851-1800 THROTTLE 266286-0800 Pos. 095 434694-0300 3-45 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 080 SUPERSTRUCTURE Drawing file: 161227-1_1_AA.tif
3-46 (88)
ECM: 192075 - 20041115
050 161174-0000 2 INSULATION
060 161175-0000 1 INSULATION
050 722497-0000 2 INSULATION
060 722498-0000 1 INSULATION
Common Parts
040 161115-0000 2 FRAME
070 312101-0449 4 SCREW M6S M8X16 FZB
Tetra Pak 674851-1800 SUPERSTRUCTURE 266286-0800 Pos. 080 161227-0400 3-47 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 080 SUPERSTRUCTURE Drawing file: 161227-2_1_AA.tif
3-48 (88)
ECM: 192075 - 20041115
050 161174-0000 2 INSULATION
060 161175-0000 1 INSULATION
050 722497-0000 2 INSULATION
060 722498-0000 1 INSULATION
Common Parts
040 161115-0000 2 FRAME
070 312101-0449 4 SCREW M6S M8X16 FZB
Tetra Pak 674851-1800 SUPERSTRUCTURE 266286-0800 Pos. 080 161227-0400 3-49 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 090 LOWER SECT.WELD.ASSEMBLY Drawing file: 266273-1_1_AA.tif
3-50 (88)
ECM: 192076 - 20041115
674851 LONG (See drawing on pages: 3-50, 3-52)
010 161098-0000 1 BOTTOM PANEL
015 161099-0000 1 BOTTOM SECTION
025 266274-0000 1 FRAME
030 266275-0000 1 FRAME
070 161172-0000 4 INSULATION
075 161173-0000 3 INSULATION
087 440950-0000 2 ANGLE BRACKET
674851 SHORT (See drawing on pages: 3-56, 3-58)
010 722500-0000 1 BOTTOM PANEL
025 722503-0000 1 FRAME SIDE RIGHT
030 722504-0000 1 FRAME SIDE LEFT
070 722499-0000 4 INSULATION
075 161173-0000 2 INSULATION
076 544886-0000 2 INSULATION
077 544887-0000 1 INSULATION
Common Parts
035 533551-0000 1 SHEET
080 266280-0000 1 SHEET
085 266281-0000 1 SHEET
088 311520-0435 12 RIVET, BLANK 3,2X10
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
095 315105-0165 4 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 LOWER SECT.WELD.ASSEMBLY 266286-0800 Pos. 090 266273-0500 3-51 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-52 (88)
ECM: 192076 - 20041115
010 161098-0000 1 BOTTOM PANEL
025 266274-0000 1 FRAME
030 266275-0000 1 FRAME
070 161172-0000 4 INSULATION
075 161173-0000 3 INSULATION
087 440950-0000 2 ANGLE BRACKET
010 722500-0000 1 BOTTOM PANEL
030 722504-0000 1 FRAME SIDE LEFT
070 722499-0000 4 INSULATION
075 161173-0000 2 INSULATION
076 544886-0000 2 INSULATION
077 544887-0000 1 INSULATION
Common Parts
035 533551-0000 1 SHEET
080 266280-0000 1 SHEET
085 266281-0000 1 SHEET
088 311520-0435 12 RIVET, BLANK 3,2X10
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
095 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-54 (88)
ECM: 192076 - 20041115
010 161098-0000 1 BOTTOM PANEL
025 266274-0000 1 FRAME
030 266275-0000 1 FRAME
070 161172-0000 4 INSULATION
075 161173-0000 3 INSULATION
087 440950-0000 2 ANGLE BRACKET
010 722500-0000 1 BOTTOM PANEL
030 722504-0000 1 FRAME SIDE LEFT
070 722499-0000 4 INSULATION
075 161173-0000 2 INSULATION
076 544886-0000 2 INSULATION
077 544887-0000 1 INSULATION
Common Parts
035 533551-0000 1 SHEET
080 266280-0000 1 SHEET
085 266281-0000 1 SHEET
088 311520-0435 12 RIVET, BLANK 3,2X10
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
095 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 090 LOWER SECT.WELD.ASSEMBLY Drawing file: 266273-6_1_AA.hpgl
3-56 (88)
ECM: 192076 - 20041115
010 161098-0000 1 BOTTOM PANEL
025 266274-0000 1 FRAME
030 266275-0000 1 FRAME
070 161172-0000 4 INSULATION
075 161173-0000 3 INSULATION
087 440950-0000 2 ANGLE BRACKET
010 722500-0000 1 BOTTOM PANEL
030 722504-0000 1 FRAME SIDE LEFT
070 722499-0000 4 INSULATION
075 161173-0000 2 INSULATION
076 544886-0000 2 INSULATION
077 544887-0000 1 INSULATION
Common Parts
035 533551-0000 1 SHEET
080 266280-0000 1 SHEET
085 266281-0000 1 SHEET
088 311520-0435 12 RIVET, BLANK 3,2X10
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
095 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
266286-0800 Pos. 090 LOWER SECT.WELD.ASSEMBLY Drawing file: 266273-7_1_AA.hpgl
3-58 (88)
ECM: 192076 - 20041115
010 161098-0000 1 BOTTOM PANEL
025 266274-0000 1 FRAME
030 266275-0000 1 FRAME
070 161172-0000 4 INSULATION
075 161173-0000 3 INSULATION
087 440950-0000 2 ANGLE BRACKET
010 722500-0000 1 BOTTOM PANEL
030 722504-0000 1 FRAME SIDE LEFT
070 722499-0000 4 INSULATION
075 161173-0000 2 INSULATION
076 544886-0000 2 INSULATION
077 544887-0000 1 INSULATION
Common Parts
035 533551-0000 1 SHEET
080 266280-0000 1 SHEET
085 266281-0000 1 SHEET
088 311520-0435 12 RIVET, BLANK 3,2X10
090 312105-0453 4 SCREW M6S ISO 4017 M8X25 A480
095 315105-0165 4 WASHER BRB8,4X16RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-60 (88)
ECM: 191470 - 20041115
LONG OVEN GROUPING BELT (See drawing on page: 3-60)
010 2636120-0000 1 FRAME LEFT
020 2636123-0000 1 FRAME RIGHT
055 276101-0000 1 CABLE TRENCH
070 266300-0000 1 CABLE TRENCH
LONG OVEN NO GROUPING BELT (See drawing on page: 3-60)
010 2636120-0000 1 FRAME LEFT
020 2636123-0000 1 FRAME RIGHT
055 276101-0000 1 CABLE TRENCH
070 266300-0000 1 CABLE TRENCH
102 2659249-0100 1 SLIDE SHEET ..................................................................3-65
SHORT OVEN NO GROUPING BELT (See drawing on page: 3-62)
010 2636121-0000 1 FRAME LEFT
020 2636124-0000 1 FRAME RIGHT
055 722570-0001 1 CABLE TRENCH
070 722570-0002 1 CABLE TRENCH
102 2659249-0100 1 SLIDE SHEET ..................................................................3-65
Common Parts
030 476433-0000 3 SUPPORT
075 276107-0000 1 CABLE TRENCH
080 2694053-0000 2 BRACKET
090 484667-0001 3 SPACER
100 484667-0002 1 SPACER
150 312105-0364 10 SCREW M6S ISO 4017 M6X10 A480
160 312105-0368 2 SCREW M6S ISO 4017 M6X16 A480
170 312105-0449 24 SCREW M6S ISO 4017 M8X16 A480
180 312101-0469 5 SCREW M6S M8X90 FZB
190 312101-0473 1 SCREW M6S M8X110 FZB
200 312101-0465 2 SCREW M6S M8X70 FZB
220 312125-0327 1 SCREW ISO 1207 M5X12 A4
250 312605-0316 2 HEXAGON NUT, M6M M6 A280
350 315105-0153 16 WASHER BRB6,4X12RFR
360 315105-0165 32 WASHER BRB8,4X16RFR
460 312105-0374 4 SCREW M6S ISO 4014 M6X30 A480
480 353101-0132 1 CABLE SHOE 1,5-2,5MM2 M5 BLUE
500 359020-0201 1 SHEET OF SELF ADHESIVE DIGITS, 4 MM
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-62 (88)
ECM: 191470 - 20041115
LONG OVEN GROUPING BELT (See drawing on page: 3-60)
010 2636120-0000 1 FRAME LEFT
020 2636123-0000 1 FRAME RIGHT
055 276101-0000 1 CABLE TRENCH
070 266300-0000 1 CABLE TRENCH
LONG OVEN NO GROUPING BELT (See drawing on page: 3-60)
010 2636120-0000 1 FRAME LEFT
020 2636123-0000 1 FRAME RIGHT
055 276101-0000 1 CABLE TRENCH
070 266300-0000 1 CABLE TRENCH
102 2659249-0100 1 SLIDE SHEET ..................................................................3-65
SHORT OVEN NO GROUPING BELT (See drawing on page: 3-62)
010 2636121-0000 1 FRAME LEFT
020 2636124-0000 1 FRAME RIGHT
055 722570-0001 1 CABLE TRENCH
070 722570-0002 1 CABLE TRENCH
102 2659249-0100 1 SLIDE SHEET ..................................................................3-65
Common Parts
030 476433-0000 3 SUPPORT
075 276107-0000 1 CABLE TRENCH
080 2694053-0000 2 BRACKET
090 484667-0001 3 SPACER
100 484667-0002 1 SPACER
150 312105-0364 10 SCREW M6S ISO 4017 M6X10 A480
160 312105-0368 2 SCREW M6S ISO 4017 M6X16 A480
170 312105-0449 24 SCREW M6S ISO 4017 M8X16 A480
180 312101-0469 5 SCREW M6S M8X90 FZB
190 312101-0473 1 SCREW M6S M8X110 FZB
200 312101-0465 2 SCREW M6S M8X70 FZB
220 312125-0327 1 SCREW ISO 1207 M5X12 A4
250 312605-0316 2 HEXAGON NUT, M6M M6 A280
350 315105-0153 16 WASHER BRB6,4X12RFR
360 315105-0165 32 WASHER BRB8,4X16RFR
460 312105-0374 4 SCREW M6S ISO 4014 M6X30 A480
480 353101-0132 1 CABLE SHOE 1,5-2,5MM2 M5 BLUE
500 359020-0201 1 SHEET OF SELF ADHESIVE DIGITS, 4 MM
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2694051-0100 Pos. 102 SLIDE SHEET Drawing file: 2659249-1_1_AB.hpgl
3-64 (88)
ECM: 192571 - 20041115
PACKWIDTH 120-149 mm
010 2725408-0000 1 SHEET
020 2725407-0000 1 SLIDE SHEET
PACKWIDTH 150-240 mm, PACKWIDTH 241-265 mm
010 297254-0000 1 SHEET
020 547095-0000 1 SLIDE SHEET
Common Parts
030 2659247-0000 1 BEAM
500 312105-0368 8 SCREW M6S ISO 4017 M6X16 A480
510 315105-0153 8 WASHER BRB6,4X12RFR
Tetra Pak 674851-1800 SLIDE SHEET 2694051-0100 Pos. 102 2659249-0100 3-65 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 110 COVERING PLATE Drawing file: 493628-11_1_AB.hpgl
3-66 (88)
ECM: 203759 - 20050224
Assembly Drawing: 493628-11_1_AB This list covers pages from 3-66 to 3-69
LONG OVEN & BELT (See drawing on page: 3-68) 050 533529-0000 1 PROTECTION
010 2581867-0000 1 PROTECTION 060 533530-0000 2 PROTECTION
025 2581865-0000 2 STEERING RAIL 065 582302-0000 14 SPRING
030 2581866-0000 2 PROTECTION PLATE 115 7309-0000 2 HANDLE
060 533531-0000 1 PROTECTION 130 266334-0000 4 AXLE PIN
060 161166-0000 1 PROTECTION 140 266335-0000 4 ROLL
065 582302-0000 16 SPRING 150 266336-0000 10 SPACER
115 7309-0000 4 HANDLE 155 552555-0000 10 SPACER
130 266334-0000 6 AXLE PIN 177 315202-0204 14 O-RING 5,3X2,4 MM
140 266335-0000 6 ROLL 180 312105-0368 16 SCREW M6S ISO 4017 M6X16 A480
177 315202-0204 16 O-RING 5,3X2,4 MM 250 312155-0376 14 SCREW DIN 7991 MF6S M6X35 A480
180 312105-0368 20 SCREW M6S ISO 4017 M6X16 A480 257 312625-0318 4 HEXAGON THIN NUT, EN 24035 ML6M M8 A4
230 312105-0370 16 SCREW M6S ISO 4017 M6X20 A480 Common Parts
250 312155-0376 16 SCREW DIN 7991 MF6S M6X35 A480 015 2744181-0000 1 PROTECTION
257 312625-0318 6 HEXAGON THIN NUT, EN 24035 ML6M M8 A4 020 582291-0000 1 PROTECTION
280 315105-0153 46 WASHER BRB6,4X12RFR 031 975917-0000 1 KEY FOR SAFETY SWITCH 90044-103
LONG OVEN & PLATE (See drawing on page: 3-68) 035 575036-0001 4 SAFETY SCREW
010 582293-0000 1 PROTECTION 040 538755-0000 1 COVER PLATE RIGHT
025 266327-0000 2 STEERING RAIL 070 538756-0000 1 COVER PLATE LEFT
060 161166-0000 1 PROTECTION 110 266333-0000 2 COVERING PLATE
065 582302-0000 16 SPRING 161 547097-0000 2 HOLDER
115 7309-0000 2 HANDLE 162 547098-0000 2 ROLL
130 266334-0000 4 AXLE PIN 163 547099-0000 2 SLEEVE
140 266335-0000 4 ROLL 165 547668-0000 1 COVERING PLATE
150 266336-0000 10 SPACER 166 547669-0000 1 COVERING PLATE
155 552555-0000 10 SPACER 168 975924-0000 1 WASHER
177 315202-0204 16 O-RING 5,3X2,4 MM 176 90458-0306 1 CABLE GLAND, M16X1,5, NO.5311 1010
250 312155-0376 16 SCREW DIN 7991 MF6S M6X35 A480 258 312605-0318 2 HEXAGON NUT, M6M M8 A280
257 312625-0318 4 HEXAGON THIN NUT, EN 24035 ML6M M8 A4 270 315105-0146 15 WASHER BRB5,3X10RFR
SHORT OVEN & PLATE (See drawing on page: 3-66) 345 342713-0211 3 PLUG, EXT THREAD HEX SOCKET 8638-00-380
010 582293-0000 1 PROTECTION B141 90459-1194 1 KEY SAF.SW. AZ16-03 ZVRK-M16
025 266327-0000 2 STEERING RAIL
030 266328-0000 2 PROTECTION
Tetra Pak 674851-1800 COVERING PLATE 674803-1200 Pos. 110 493628-0700 3-67 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 110 COVERING PLATE Drawing file: 493628-12_1_AB.hpgl
3-68 (88)
ECM: 203759 - 20050224
LONG OVEN & BELT (See drawing on page: 3-68) 050 533529-0000 1 PROTECTION
025 2581865-0000 2 STEERING RAIL 065 582302-0000 14 SPRING
030 2581866-0000 2 PROTECTION PLATE 115 7309-0000 2 HANDLE
060 533531-0000 1 PROTECTION 130 266334-0000 4 AXLE PIN
060 161166-0000 1 PROTECTION 140 266335-0000 4 ROLL
065 582302-0000 16 SPRING 150 266336-0000 10 SPACER
115 7309-0000 4 HANDLE 155 552555-0000 10 SPACER
130 266334-0000 6 AXLE PIN 177 315202-0204 14 O-RING 5,3X2,4 MM
140 266335-0000 6 ROLL 180 312105-0368 16 SCREW M6S ISO 4017 M6X16 A480
177 315202-0204 16 O-RING 5,3X2,4 MM 250 312155-0376 14 SCREW DIN 7991 MF6S M6X35 A480
180 312105-0368 20 SCREW M6S ISO 4017 M6X16 A480 257 312625-0318 4 HEXAGON THIN NUT, EN 24035 ML6M M8 A4
230 312105-0370 16 SCREW M6S ISO 4017 M6X20 A480 Common Parts
250 312155-0376 16 SCREW DIN 7991 MF6S M6X35 A480 015 2744181-0000 1 PROTECTION
257 312625-0318 6 HEXAGON THIN NUT, EN 24035 ML6M M8 A4 020 582291-0000 1 PROTECTION
280 315105-0153 46 WASHER BRB6,4X12RFR 031 975917-0000 1 KEY FOR SAFETY SWITCH 90044-103
LONG OVEN & PLATE (See drawing on page: 3-68) 035 575036-0001 4 SAFETY SCREW
010 582293-0000 1 PROTECTION 040 538755-0000 1 COVER PLATE RIGHT
025 266327-0000 2 STEERING RAIL 070 538756-0000 1 COVER PLATE LEFT
060 161166-0000 1 PROTECTION 110 266333-0000 2 COVERING PLATE
065 582302-0000 16 SPRING 161 547097-0000 2 HOLDER
115 7309-0000 2 HANDLE 162 547098-0000 2 ROLL
130 266334-0000 4 AXLE PIN 163 547099-0000 2 SLEEVE
140 266335-0000 4 ROLL 165 547668-0000 1 COVERING PLATE
150 266336-0000 10 SPACER 166 547669-0000 1 COVERING PLATE
155 552555-0000 10 SPACER 168 975924-0000 1 WASHER
177 315202-0204 16 O-RING 5,3X2,4 MM 176 90458-0306 1 CABLE GLAND, M16X1,5, NO.5311 1010
250 312155-0376 16 SCREW DIN 7991 MF6S M6X35 A480 258 312605-0318 2 HEXAGON NUT, M6M M8 A280
257 312625-0318 4 HEXAGON THIN NUT, EN 24035 ML6M M8 A4 270 315105-0146 15 WASHER BRB5,3X10RFR
SHORT OVEN & PLATE (See drawing on page: 3-66) 345 342713-0211 3 PLUG, EXT THREAD HEX SOCKET 8638-00-380
010 582293-0000 1 PROTECTION B141 90459-1194 1 KEY SAF.SW. AZ16-03 ZVRK-M16
025 266327-0000 2 STEERING RAIL
030 266328-0000 2 PROTECTION
Tetra Pak 674851-1800 COVERING PLATE 674803-1200 Pos. 110 493628-0700 3-69 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 120 REGULATOR Drawing file: 2656146-1_1_AB.hpgl
3-70 (88)
ECM: 203011 - 20050224
-
010 2659250-0100 1 FILTER-REGULATOR ........................................... 3-73, 3-75
020 2656145-0000 1 BRACKET
300 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
310 312105-0329 4 SCREW M6S ISO 4017 M5X16 A480
320 312605-0314 4 HEXAGON NUT, M6M M5 A280
330 315105-0156 4 WASHER BRB 6.7X14 RFR
340 315105-0146 8 WASHER BRB5,3X10RFR
Tetra Pak 674851-1800 REGULATOR 674803-1200 Pos. 120 2656146-0100 3-71 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2656146-0100 Pos. 010 FILTER-REGULATOR Drawing file: 2659250-1_1_AB.hpgl
3-72 (88)
ECM: 186905 - 20041115
2 LAYER (See drawing on pages: 3-72, 3-74)
Common Parts
300 90224-0372 1 CONN. STRAIGHT ESK-1/4-1/4 151521
310 90458-2730 1 PRESSURE SENS. SDE-1-D10-G2--R18-C-P1-M8
320 90459-2137 1 ILLUMINATING SEAL, MEB-LD-12-24DC
330 90459-2138 1 CONNECTOR 3 POLE
340 90459-2243 1 SHUT OFF VALVE, MS4-EE-1/4-V24
350 90459-4791 1 SOFT START VALVE, MS4-DL-1/4-A8
360 90459-2245 2 DISTRIBUTOR, MS4-FRM-1/4
370 90459-2246 1 END PLATE, MS4-AGB
380 90459-2247 3 BRACKET, MS4-WP
400 90459-2248 4 BRACKET, MS4-MV
410 90459-2337 1 SHUT OFF VALVE, MS4-EM-1/4
420 90459-2339 1 FILTER REGULATOR, MS4-LFR-1/4-D7-ERV-AS
430 90459-2425 1 PRESSURE REGULATOR IN-LINE, BSP-1/4
440 90459-2271 1 QUICK COUPLING, (M) 10 320 5263
580 342713-0210 2 PLUG, EXT THREAD HEX SOCKET 8638-00-140
590 315400-0004 M TUBE PUN-H-8X1,25-BL
600 315400-0010 M TUBE PUN-H-12X2-BL
W110 351301-0050 1 ACTUATOR/SENSOR CABLE PRKMV 3-06/5M
W264 351150-0403 M 5 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
Tetra Pak 674851-1800 FILTER-REGULATOR 2656146-0100 Pos. 010 2659250-0100 3-73 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2656146-0100 Pos. 010 FILTER-REGULATOR Drawing file: 2659250-2_1_AB.hpgl
3-74 (88)
ECM: 186905 - 20041115
2 LAYER (See drawing on pages: 3-72, 3-74)
Common Parts
310 90458-2730 1 PRESSURE SENS. SDE-1-D10-G2--R18-C-P1-M8
320 90459-2137 1 ILLUMINATING SEAL, MEB-LD-12-24DC
330 90459-2138 1 CONNECTOR 3 POLE
340 90459-2243 1 SHUT OFF VALVE, MS4-EE-1/4-V24
350 90459-4791 1 SOFT START VALVE, MS4-DL-1/4-A8
360 90459-2245 2 DISTRIBUTOR, MS4-FRM-1/4
370 90459-2246 1 END PLATE, MS4-AGB
380 90459-2247 3 BRACKET, MS4-WP
400 90459-2248 4 BRACKET, MS4-MV
410 90459-2337 1 SHUT OFF VALVE, MS4-EM-1/4
420 90459-2339 1 FILTER REGULATOR, MS4-LFR-1/4-D7-ERV-AS
430 90459-2425 1 PRESSURE REGULATOR IN-LINE, BSP-1/4
440 90459-2271 1 QUICK COUPLING, (M) 10 320 5263
580 342713-0210 2 PLUG, EXT THREAD HEX SOCKET 8638-00-140
590 315400-0004 M TUBE PUN-H-8X1,25-BL
600 315400-0010 M TUBE PUN-H-12X2-BL
W110 351301-0050 1 ACTUATOR/SENSOR CABLE PRKMV 3-06/5M
Tetra Pak 674851-1800 FILTER-REGULATOR 2656146-0100 Pos. 010 2659250-0100 3-75 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 140 VALVE PANEL Drawing file: 2656148-1_1_AC.hpgl
3-76 (88)
ECM: 203166 - 20050224
-
010 2601344-0100 1 SILENCER ....................................................................... 3-79
020 2656147-0100 1 VALVE RAMP .................................................................. 3-81
030 2656149-0000 1 WALL
040 2656150-0000 1 CABINET
050 2656151-0000 1 DOOR
060 2656152-0000 1 PLATE
070 2656153-0000 1 PLATE
080 2656154-0000 2 SPACER
090 2656155-0000 1 BRACKET
100 2656156-0000 1 BRACKET
110 2656159-0000 1 SET OF SIGNS
300 90099-0075 1 NUT HEX. M12X1, BR NI. PL.
310 90235-0250 1 THROTTLE CHECK VALVE, GR-1/8-B
90235-0401 1 PROTECTIVE COVER
320 90237-0079 2 FAST LOCKING BOLT, FSQ -M8
330 90237-0178 2 FAST LOCKING SOCKET,4-28599, M8
340 90248-0015 2 HINGE, RIGHT HT 1
350 90143-0057 MM 1200 STRIP EMKA 1011-05 21X11MM
510 312115-0368 16 SCREW ISO4762 M6X16 A4
520 312115-0451 6 SCREW ISO4762 M8X20 A4
530 312115-0457 2 SCREW ISO4762 M8X35 A4
540 312605-0314 6 HEXAGON NUT, M6M M5 A280
550 315105-0153 16 WASHER BRB6,4X12RFR
560 315105-0165 8 WASHER BRB8,4X16RFR
570 315400-0004 M TUBE PUN-H-8X1,25-BL
580 352113-0101 CLIP STRIP, 92X2,5 MM
590 359009-0800 CABLE MARKER, YELLOW, PK 2/4, 0-9
Tetra Pak 674851-1800 VALVE PANEL 674803-1200 Pos. 140 2656148-0100 3-77 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2656148-0100 Pos. 010 SILENCER Drawing file: 2601344-1_1_AA.hpgl
3-78 (88)
ECM: 128604 - 20030228
-
010 1074209-0000 1 BRACKET
300 90328-0033 1 SILENCER
500 312105-0367 2 SCREW M6S ISO 4017 M6X14 A480
510 312605-0316 2 HEXAGON NUT, M6M M6 A280
520 315105-0153 4 WASHER BRB6,4X12RFR
530 342701-0206 1 BUSHING,INT./EXT.G-THREAD G1/2"-G3/8"
Tetra Pak 674851-1800 SILENCER 2656148-0100 Pos. 010 2601344-0100 3-79 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2656148-0100 Pos. 020 VALVE RAMP Drawing file: 2656147-1_1_AB.hpgl
3-80 (88)
ECM: 186903 - 20041115
-
310 90328-0012 4 SILENCER
340 90458-1204 1 BASIC SUB-BASE FOR 4 VALVES
350 90458-2596 1 EXPANSION MODULE EXTRA SUPPLY 2 VALVES
370 90458-1210 2 SEALING, ALL CHANNELS BLOCKED
380 90458-1212 1 LEFT ENDPLATE INCL. 10M CABLE
390 90458-1214 1 RIGHT ENDPLATE EXTERNAL PILOT AIR
540 350013-0003 2 PLUG QSC-8H
570 350015-0004 1 Y-FITTING QSY-F-8-6
580 315400-0001 M 1 TUBE PUN-H-6X1-BL
590 315400-0004 M 1 TUBE PUN-H-8X1,25-BL
600 315400-0010 M 1 TUBE PUN-H-12X2-BL
Y104 90458-1199 1 VALVE CLOSED IN MID-POSITION, 5/3
Tetra Pak 674851-1800 VALVE RAMP 2656148-0100 Pos. 020 2656147-0100 3-81 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. 150 SPEED REGULATOR VALVE Drawing file: 2686758-1_1_AB.hpgl
3-82 (88)
ECM: 186906 - 20041115
-
010 2686759-0000 1 BRACKET
300 90459-5410 1 VALVE BODY 3/2 MONOSTABLE NC
310 90235-0819 1 FLOW CONTROL VALVE, GRLA 1/4B
330 90235-0750 1 THROTTLE CHECK VALVE
500 350003-0007 1 PUSH-IN FITTING QS-F-G1/4-8-I
510 312105-0366 2 SCREW M6S ISO 4017 M6X12 A480
520 312105-0376 2 SCREW M6S ISO 4014 M6X35 A480
530 315106-0153 4 WASHER ISO 7089-6-200 HV A4
540 350002-0002 1 PUSH-IN L-FITTING QSL-F-M5-6
560 350007-0011 1 PUSH-IN T-FITTING QST-F-G1/4-12
Y104.3 90042-0455 1 COIL FESTO MSFG 24VDC
Tetra Pak 674851-1800 SPEED REGULATOR VALVE 674803-1200 Pos. 150 2686758-0100 3-83 (88)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674803-1200 Pos. X102 CONNECTION BOX Drawing file: 2659230-1_1_AB.hpgl
3-84 (88)
ECM: 161244 - 20050224
-
020 268964-0000 2 SPACER
030 2659231-0000 1 CONNECTION BOX
320 90135-0026 2 EARTH TERMINAL, 3802.6
340 90458-0313 7 CABLE GLAND, M12X1,5, NO.5311 1100
350 90458-0316 1 CABLE GLAND, M25X1,5, NO.5311 1130
500 312125-0287 1 SCREW ISO 1207 M4X8 A4
510 312125-0291 2 SCREW ISO 1207 M4X12 A4
520 312125-0295 2 SCREW ISO 1207 M4X20 A4
530 315105-0136 2 WASHER BRB4,3XRFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
3-86 (88)
ECM: 161244 - 20040614
-
020 268964-0000 2 SPACER
030 2666275-0000 1 CONNECTION BOX
320 90135-0026 2 EARTH TERMINAL, 3802.6
340 90458-0313 7 CABLE GLAND, M12X1,5, NO.5311 1100
350 90458-0316 1 CABLE GLAND, M25X1,5, NO.5311 1130
500 312125-0287 1 SCREW ISO 1207 M4X8 A4
510 312125-0291 2 SCREW ISO 1207 M4X12 A4
520 312125-0295 2 SCREW ISO 1207 M4X20 A4
530 315105-0136 2 WASHER BRB4,3XRFR
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 CABINET 674851-1800 Pos. 060

4-1 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 060 CABINET Drawing file: 675309-1_1_AA.hpgl
4-2 (44)
ECM: 175222 - 20041115
-
010 2607503-0100 1 CABINET ........................................................................... 4-5
Tetra Pak 674851-1800 CABINET 674851-1800 Pos. 060 675309-0100 4-3 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-4 (44)
ECM: 175225 - 20041115
674851
050 2607505-0100 1 ASSEMBLY PLATE .................................. 4-7, 4-9, 4-11, 4-13
060 2690097-0000 1 DELIVERED DESIGN
070 2690098-0000 1 FUSE PANEL SIGN
Common Parts
010 2607498-0100 1 EL-CABINET DOOR ............................................ 4-35, 10-11
020 2607500-0100 1 EL-CABINET DOOR .............................................. 4-39, 10-7
040 2607513-0100 1 ELECTRICAL CABINET MECH. ..................................... 4-43
Q000 90111-0134 1 MAIN SWITCH P3-63/EA/SVB-SW/N/HI11/H-P3
Q000.1 359241-0124 1 SIGN: " MAIN SWITCH"
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607503-0100 Pos. 050 ASSEMBLY PLATE Drawing file: 2607505-1_1_AA.hpgl
4-6 (44)
ECM: 203595 - 20050224
ETHERNET LONG OVEN 1LAYER NO GROUPING BELT F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K
D001 90031-0076 1 CPU364, ETHERNET COMMUNICATION G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
F002.2 90233-0030 3 TUBE FUSE, 30A 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC K019 90119-0082 1 SSR 90119-67 + HEAT SINK
90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC K020 90119-0082 1 SSR 90119-67 + HEAT SINK
K019 90119-0082 1 SSR 90119-67 + HEAT SINK K025 90075-0143 1 CONTACTOR, 4KW 24VDC
K020 90119-0082 1 SSR 90119-67 + HEAT SINK Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL
ETHERNET LONG OVEN 2LAYER GROUPING BELT Z125 90024-0064 1 FERRITE, RT187-102-170-A5
A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE Z126 90024-0064 1 FERRITE, RT187-102-170-A5
D001 90031-0076 1 CPU364, ETHERNET COMMUNICATION ETHERNET SHORT OVEN 1LAYER NO GROUPING BELT, ETHERNET SHORT OVEN 2LAYER NO GROUPING
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 BELT
F002.2 90233-0030 3 TUBE FUSE, 30A D001 90031-0076 1 CPU364, ETHERNET COMMUNICATION
F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K GENIUS LONG OVEN 1LAYER NO GROUPING BELT
G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104 A010 90031-0031 1 ENHANCED GENIUS COMMUNICATION MODULE
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
K019 90119-0082 1 SSR 90119-67 + HEAT SINK F002.2 90233-0030 3 TUBE FUSE, 30A
K020 90119-0082 1 SSR 90119-67 + HEAT SINK K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
K025 90075-0143 1 CONTACTOR, 4KW 24VDC 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A K019 90119-0082 1 SSR 90119-67 + HEAT SINK
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 K020 90119-0082 1 SSR 90119-67 + HEAT SINK
Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Z125 90024-0064 1 FERRITE, RT187-102-170-A5 Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
Z126 90024-0064 1 FERRITE, RT187-102-170-A5 GENIUS LONG OVEN 2LAYER NO GROUPING BELT
ETHERNET LONG OVEN 2LAYER NO GROUPING BELT A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE
A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE A010 90031-0031 1 ENHANCED GENIUS COMMUNICATION MODULE
D001 90031-0076 1 CPU364, ETHERNET COMMUNICATION D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
F002.2 90233-0030 3 TUBE FUSE, 30A F002.2 90233-0030 3 TUBE FUSE, 30A
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
K019 90119-0082 1 SSR 90119-67 + HEAT SINK K019 90119-0082 1 SSR 90119-67 + HEAT SINK
Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
ETHERNET LONG OVEN 1LAYER GROUPING BELT GENIUS LONG OVEN 2LAYER GROUPING BELT
D001 90031-0076 1 CPU364, ETHERNET COMMUNICATION A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 A010 90031-0031 1 ENHANCED GENIUS COMMUNICATION MODULE
F002.2 90233-0030 3 TUBE FUSE, 30A D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
Tetra Pak 674851-1800 ASSEMBLY PLATE 2607503-0100 Pos. 050 2607505-0100 4-7 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-8 (44)
ECM: 203595 - 20050224
GENIUS LONG OVEN 2LAYER GROUPING BELT (Cont'd) Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
F002.2 90233-0030 3 TUBE FUSE, 30A Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K SNP LONG OVEN 2LAYER NO GROUPING BELT
G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104 A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
K019 90119-0082 1 SSR 90119-67 + HEAT SINK F002.2 90233-0030 3 TUBE FUSE, 30A
K020 90119-0082 1 SSR 90119-67 + HEAT SINK K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
K025 90075-0143 1 CONTACTOR, 4KW 24VDC 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A K019 90119-0082 1 SSR 90119-67 + HEAT SINK
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 K020 90119-0082 1 SSR 90119-67 + HEAT SINK
Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Z125 90024-0064 1 FERRITE, RT187-102-170-A5 Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
Z126 90024-0064 1 FERRITE, RT187-102-170-A5 SNP LONG OVEN 2LAYER GROUPING BELT
GENIUS LONG OVEN 1LAYER GROUPING BELT A008 90031-0059 1 PLC, DIGITAL OUTPUT MODULE
A010 90031-0031 1 ENHANCED GENIUS COMMUNICATION MODULE D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
D001 90031-0075 1 CPU363, SERIAL COMMUNICATION F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 F002.2 90233-0030 3 TUBE FUSE, 30A
F002.2 90233-0030 3 TUBE FUSE, 30A F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K
F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104
G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104 K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
K025 90075-0143 1 CONTACTOR, 4KW 24VDC Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL
Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL Z125 90024-0064 1 FERRITE, RT187-102-170-A5
Z125 90024-0064 1 FERRITE, RT187-102-170-A5 Z126 90024-0064 1 FERRITE, RT187-102-170-A5
Z126 90024-0064 1 FERRITE, RT187-102-170-A5 SNP LONG OVEN 1LAYER GROUPING BELT
GENIUS SHORT OVEN 1LAYER NO GROUPING BELT, GENIUS SHORT OVEN 2LAYER NO GROUPING BELT D001 90031-0075 1 CPU363, SERIAL COMMUNICATION
A010 90031-0031 1 ENHANCED GENIUS COMMUNICATION MODULE F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
D001 90031-0075 1 CPU363, SERIAL COMMUNICATION F002.2 90233-0030 3 TUBE FUSE, 30A
SNP LONG OVEN 1LAYER NO GROUPING BELT F025 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K
D001 90031-0075 1 CPU363, SERIAL COMMUNICATION G025 90459-3448 1 VARIABLE FREQUENCY DRIVE 22A-A1P5N104
F002.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148 K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC
F002.2 90233-0030 3 TUBE FUSE, 30A 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
K009 90075-0125 1 CONTACTOR, 7,5KW 24VDC K019 90119-0082 1 SSR 90119-67 + HEAT SINK
K020 90119-0082 1 SSR 90119-67 + HEAT SINK Q002 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-10 (44)
ECM: 203595 - 20050224
SNP LONG OVEN 1LAYER GROUPING BELT (Cont'd) A060 90031-0051 1 BASEPLATE, 10-SLOT
Q002.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0 A090 90457-0092 1 SAFETY RELAY RT9-24VDC
Z025 90459-3460 1 FOOTPRINT FILTER 22-RF010-AL A091 90457-0092 1 SAFETY RELAY RT9-24VDC
Z125 90024-0064 1 FERRITE, RT187-102-170-A5 C001 90159-0098 1 CAPACITOR, 22000 æF 100 V
Z126 90024-0064 1 FERRITE, RT187-102-170-A5 90159-0304 1 HOLDER
SNP SHORT OVEN 1LAYER NO GROUPING BELT, SNP SHORT OVEN 2LAYER NO GROUPING BELT C001.1 90159-0304 1 HOLDER
D001 90031-0075 1 CPU363, SERIAL COMMUNICATION D001.1 1591014-0001 1 PLC PROGRAMME MEDIA ........................................... 4-31
Common Parts F000 90082-0013 1 OVER VOLT. PROTECT. PU 4C-R 230 VAC
010 972146-0000 1 COVER PLATE 90082-0301 3 OVER VOLT. PROTECT. PU 0 C 833951
020 2607520-0000 1 CANTILEVER F001.1 90459-3799 3 FUSE HOLDER, MSC 10 1-POLE A250148
030 2607509-0100 1 TERMINAL X002 ..............................................................4-15 F001.2 90233-0030 3 TUBE FUSE, 30A
040 2607516-0100 1 TERMINAL X003 ..............................................................4-17 F003 90007-0129 1 CIRCUIT BREAKER, 1P 10 A K
050 2607510-0100 1 TERMINAL X004 ..............................................................4-19 F005 90007-0128 1 CIRCUIT BREAKER, 1P 6 A K
060 2607518-0100 1 TERMINAL XL90 ..............................................................4-21 F010 90007-0142 1 CIRCUIT BREAKER, 2P 32 A K
070 2607519-0100 1 ASSEMBLY PLATE ......................................................... 4-23 F011 90007-0156 1 CIRCUIT BREAKER, 1P 4 A K
080 2607517-0100 1 TERMINAL XL10-13 ........................................................ 4-25 F012 90007-0156 1 CIRCUIT BREAKER, 1P 4 A K
090 2666285-0100 1 TERMINAL X001 ..............................................................4-27 G001 90031-0068 1 PLC, POWER SUPPLY
1000 2725269-0100 1 MONO-CONDUCTOR CABLES ..................................... 4-29 90031-0301 1 SPARE BATTERY CPU,PCM,2PCS
200 90159-0304 1 HOLDER 352551-0134 1 FINE-WIRE FUSE 2 A SLOW,5X20MM
210 90194-0152 3 SIGN, EARTH G011 90459-4245 1 POWER SUPPLY UNIT, 230VAC/24VDC 3,75A
220 90259-0308 3 CONN.TERM.K&M BK 25/3-PKZ0 G012 90459-4245 1 POWER SUPPLY UNIT, 230VAC/24VDC 3,75A
230 90259-0315 2 BUS BAR 3-POLE, K&M B 3.1/2-PKZM1 K001 90075-0143 1 CONTACTOR, 4KW 24VDC
240 90259-0311 1 3 POLE BUSBAR K&M B3.1/5 K002 90075-0143 1 CONTACTOR, 4KW 24VDC
300 353024-0208 2 EARTH TERMINAL, 1010.4 K003 90075-0143 1 CONTACTOR, 4KW 24VDC
310 312105-0291 1 SCREW M6S ISO 4017 M4X12 A470 K003 90075-0141 1 CONTACTOR, 4KW 24VDC
320 312605-0312 1 HEXAGON NUT, M6M M4 A280 K006 90075-0143 1 CONTACTOR, 4KW 24VDC
330 315105-0136 7 WASHER BRB4,3XRFR K008 90075-0125 1 CONTACTOR, 7,5KW 24VDC
340 90459-2928 1 LABEL 60417-2-IEC-5020, COMM. REF. POT. 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
350 90458-0721 1 PIPE CLIP FOR TUBE D=8 MMSZ 2367080 K010 90075-0143 1 CONTACTOR, 4KW 24VDC
360 353031-0203 5 END SUPPORT, WEW 35/2 K014 90459-3178 1 SOLID STATE RELAY, 037N0044
A002 90031-0058 1 PLC, DIGITAL INPUT MODULE K015 90459-3178 1 SOLID STATE RELAY, 037N0044
A003 90031-0058 1 PLC, DIGITAL INPUT MODULE K017 90119-0082 1 SSR 90119-67 + HEAT SINK
A004 90031-0058 1 PLC, DIGITAL INPUT MODULE K018 90119-0082 1 SSR 90119-67 + HEAT SINK
A005 90031-0059 1 PLC, DIGITAL OUTPUT MODULE K030 90075-0143 1 CONTACTOR, 4KW 24VDC
A030 90410-0051 1 TEMPERATURE CONTROLLER, KS 40 K090 90075-0125 1 CONTACTOR, 7,5KW 24VDC
A030.1 359241-0228 1 SIGN: " TEMP. HEATER" 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
A030.2 359240-0100 1 SIGN HOLDER FOR 359240-0001 K090.2 90024-0034 1 DIODE SURGE SUPPRESSOR, FD B DIL
A030.3 311521-0154 2 BLANK RIVET 4X10 K091 90075-0124 1 CONTACTOR, 4KW 24VDC
A031 90458-0961 1 SOLID-STATE RELAY G3R-ODX02SN 90075-0313 1 AUXILIARY CONTACT K&M 22 DILM.2NO,2NC
A031.1 90458-0963 1 SOCKET, TS35 OMRON P2RF-05-E K091.2 90024-0034 1 DIODE SURGE SUPPRESSOR, FD B DIL
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-12 (44)
ECM: 203595 - 20050224
Common Parts (Cont'd)
K098 90119-0108 1 RELAY OMRON G2R-2-SNI-24DC
90129-0018 1 BASE OMRON P2RF-08-E
K098.1 90129-0018 1 BASE OMRON P2RF-08-E
90129-0018 1 BASE OMRON P2RF-08-E
K099.1 90129-0018 1 BASE OMRON P2RF-08-E
M001 90264-0032 1 FAN PAPST 220V 18W
M001 90422-0049 1 COOLER, SK 3203.100
P001 90178-0007 1 HOUR COUNTER, BG 40,17-1 12-48VDC
Q000 90111-0134 1 MAIN SWITCH P3-63/EA/SVB-SW/N/HI11/H-P3
Q001 90095-0073 1 OVERLOAD PROTECTION, PKZM 1,6 A
Q001.1 90259-0317 1 AUXILARY CONTACTS, NHI 11-PKZ0
Q001.2 90259-0311 1 3 POLE BUSBAR K&M B3.1/5
Q001.3 90259-0308 1 CONN.TERM.K&M BK 25/3-PKZ0
Q006.2 90259-0311 1 3 POLE BUSBAR K&M B3.1/5
Q010 90095-0075 1 OVERLOAD PROTECTION, PKZM 4 A
Q030 90095-0071 1 OVERLOAD PROTECTION, PKZM 0-0,63 A
Q070 90459-5138 1 RESIDUAL CURRENT DEVICE, F202 AC-25/0,03
Q070.1 90459-1738 1 MANDATORY ACTION SIGN ISO, READ MAINTENA
Q081 90095-0071 1 OVERLOAD PROTECTION, PKZM 0-0,63 A
T002 90245-0051 1 MATCHING TRANSF. 5KVA
V002 90038-0050 1 RECTIFIER, 26/63A SKD 82/04
W002 578874-0000 1 HF BRAIDED WIRE 1,6 MM2
W003 1368508-0101 1 WIRE ................................................................................4-33
X007 90001-0033 1 WALL SOCKET OUTLET
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. 030 TERMINAL X002 Drawing file: 2607509-1_1_AA.hpgl
4-14 (44)
ECM: 173387 - 20041115
-
020 359011-0821 2 SET OF SIGNS 6-FW 1-50
030 353024-0205 15 EARTH TERMINAL, 1010.1
050 359011-0822 2 SET OF SIGNS 6-FW 51-100
060 353024-0208 4 EARTH TERMINAL, 1010.4
Tetra Pak 674851-1800 TERMINAL X002 2607505-0100 Pos. 030 2607509-0100 4-15 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-16 (44)
ECM: 173387 - 20041115
-
0010 353041-0106 1 HOLDER ZB35 K 5026.8
0020 359010-0613 2 SIGN BOARD BSG 1/2 "N"
0030 353041-0001 MM 50 RAIL 10X3MM SSCH
0040 353033-0104 2 END PLATE, 10502.8
0050 353031-0203 2 END SUPPORT, WEW 35/2
0060 353022-0002 1 NEUTRAL TERMINAL, 10107.8
0070 353022-0006 3 NEUTRAL TERMINAL, 10106.8
0080 359011-0807 1 MARKING PLATES 5-FW 1-50
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-18 (44)
ECM: 173387 - 20041115
-
0010 90077-0113 110 FEED THROUGH TERMINAL, 10-00102150-1
0070 353032-0009 1 END PLATE, WAP FOR WDK
0080 353031-0203 2 END SUPPORT, WEW 35/2
0090 353024-0212 16 EARTH TERMINAL, 10363.0
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. 060 TERMINAL XL90 Drawing file: 2607518-1_1_AA.hpgl
4-20 (44)
ECM: 173387 - 20041115
-
0010 353031-0203 2 END SUPPORT, WEW 35/2
0020 90077-0113 4 FEED THROUGH TERMINAL, 10-00102150-1
0030 353024-0212 2 EARTH TERMINAL, 10363.0
0040 90129-0018 2 BASE OMRON P2RF-08-E
0050 353032-0009 2 END PLATE, WAP FOR WDK
90129-0018 1 BASE OMRON P2RF-08-E
K098.1 90129-0018 1 BASE OMRON P2RF-08-E
90129-0018 1 BASE OMRON P2RF-08-E
K099.1 90129-0018 1 BASE OMRON P2RF-08-E
Tetra Pak 674851-1800 TERMINAL XL90 2607505-0100 Pos. 060 2607518-0100 4-21 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-22 (44)
ECM: 175226 - 20041115
674851
595 353042-0004 MM 395 RAIL TS 35/7,5
Common Parts
010 1259310-0000 17 SLEEVE
020 2607506-0000 1 ASSEMBLY PLATE
200 90181-0053 MM 582 CABLE DUCT, 40X80MM
210 90181-0053 MM 540 CABLE DUCT, 40X80MM
215 90181-0053 MM 542 CABLE DUCT, 40X80MM
220 90181-0054 MM 582 CABLE DUCT, 60X80MM
230 90181-0054 MM 540 CABLE DUCT, 60X80MM
235 90181-0055 MM 560 CABLE DUCT, 80X80MM
240 90181-0054 MM 1262 CABLE DUCT, 60X80MM
260 90181-0088 31 PLASTIC RIVET, PR 52314
270 90181-0053 MM 482 CABLE DUCT, 40X80MM
275 90181-0054 MM 540 CABLE DUCT, 60X80MM
290 90005-0102 33 WASHER PLAIN ROUND 5/19, H=1 FZB
310 90005-0102 4 WASHER PLAIN ROUND 5/19, H=1 FZB
350 90062-0061 4 LOCK WASHER NORD-LOCK,6,5/10,8, T=2,2
500 312605-0316 8 HEXAGON NUT, M6M M6 A280
510 315105-0153 7 WASHER BRB6,4X12RFR
520 312121-0287 37 SCREW ISO 1207 M4X8 4.8 - 5.8 Z.PL.
530 312121-0291 27 SCREW ISO 1207 M4X12 4.8 - 5.8 Z.PL.
540 312121-0327 2 SCREW ISO 1207 M5X12 4.8 - 5.8 Z.PL.
550 312121-0366 4 SCREW ISO 1207 M6X12 4.8 - 5.8 Z.PL.
560 312605-0312 8 HEXAGON NUT, M6M M4 A280
570 315105-0136 12 WASHER BRB4,3XRFR
580 315105-0153 1 WASHER BRB6,4X12RFR
585 353042-0004 MM 545 RAIL TS 35/7,5
590 353042-0004 MM 1295 RAIL TS 35/7,5
600 353042-0004 MM 473 RAIL TS 35/7,5
605 353042-0004 MM 473 RAIL TS 35/7,5
610 353042-0004 MM 72 RAIL TS 35/7,5
615 353042-0004 MM 180 RAIL TS 35/7,5
620 353042-0004 MM 545 RAIL TS 35/7,5
625 353042-0004 MM 180 RAIL TS 35/7,5
630 312605-0314 2 HEXAGON NUT, M6M M5 A280
635 353042-0004 MM 545 RAIL TS 35/7,5
640 315106-0146 2 WASHER ISO 7089-5-200 HV A4
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. 080 TERMINAL XL10-13 Drawing file: 2607517-1_1_AA.hpgl
4-24 (44)
ECM: 173387 - 20041115
-
0010 353031-0203 2 END SUPPORT, WEW 35/2
0040 353033-0105 4 PARTITITION, 10501.0
0050 353034-0030 4 BRIDGE CONNECTOR WQV 2,5/10, 10544.6
Tetra Pak 674851-1800 TERMINAL XL10-13 2607505-0100 Pos. 080 2607517-0100 4-25 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-26 (44)
ECM: 173387 - 20041115
-
0510 353034-0033 1 BRIDGE CONNECTOR, WQV 10/10, 10524.6
0520 353033-0105 2 PARTITITION, 10501.0
0530 353024-0207 4 EARTH TERMINAL, 1010.3
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. 1000 MONO-CONDUCTOR CABLES Drawing file:
4-28 (44)
This page is intentionally left blank.

ECM: 189794 - 20041115
Assembly Drawing:
-
1000 351160-0102 MM CABLE (1UNIT = 100M)
1005 351160-0104 MM CABLE AWM 1X1,5 MM2 DARKBLUE
1010 351160-0108 MM CABLE AWM 1X10 MM2 DARKBLUE
1020 351161-0104 MM CABLE AWM LIGTH BLUE 1,5MM2
1025 351161-0109 MM CABLE AWM 1X16 MM2 LIGHTBLUE
1025 351162-0105 MM CABLE AWM 1X2,5 MM2 YELLOW-GREEN
1030 351162-0104 MM CABLE AWM 1X1,5 MM2 YELLOW-GREEN
1040 351162-0107 MM CABLE AWM 1X6 MM2 YELLOW-GREEN
1055 351163-0107 MM CABLE AWM 1X6 MM2 RED
1060 351164-0104 MM CABLE AWM 1X1,5 MM2 BLACK
1065 351164-0105 MM CABLE (1UNIT = 100M)
1065 351164-0108 MM CABLE AWM 1X10 MM2 BLACK
1100 353001-0103 END SLEEVE 0,75 MM2
1105 353001-0104 END SLEEVE 1,5 MM2
1110 353001-0105 END SLEEVE 2,5 MM2
1111 353001-0118 END SLEEVE 6MM2 BLACK
1112 353001-0108 END SLEEVE 10 MM2
Tetra Pak 674851-1800 MONO-CONDUCTOR CABLES 2607505-0100 Pos. 1000 2725269-0100 4-29 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. D001.1 PLC PROGRAMME MEDIA Drawing file:
4-30 (44)

ECM: 131320 - 20041115
Assembly Drawing:
-
0010 1591014-1001 1 PROGRAM OBJECT CODE
0010.1 90458-2027 1 FLOPPY DISK, 3,5" 1,44MB FOR PC
0010.2 2724885-0000 1 LABEL DISKETTE
Tetra Pak 674851-1800 PLC PROGRAMME MEDIA 2607505-0100 Pos. D001.1 1591014-0001 4-31 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607505-0100 Pos. W003 WIRE Drawing file: 1368508-1_1_AA.hpgl
4-32 (44)
ECM: 94420 - 20010808
-
10 1556781-0000 1 CABLE
30 353103-0120 1 CABLE SHOE 1,25 MM2 RED
Tetra Pak 674851-1800 WIRE 2607505-0100 Pos. W003 1368508-0101 4-33 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607503-0100 Pos. 010 EL-CABINET DOOR Drawing file: 2607498-1_1_AA.hpgl
4-34 (44)
ECM: 204828 - 20050224
COOLING SYSTEM ELCAB = AC
085 2607522-0000 1 DOOR
COOLING SYSTEM ELCAB = FAN
005 599748-0101 1 COOLING AIR INTAKE ........................................ 4-37, 10-13
010 2607499-0000 1 DOOR
Common Parts
020 959656-0000 2 COTTER
030 959657-0000 2 HINGE FLANGE
040 959658-0000 2 SPRING
050 975880-0000 2 HINGE FLANGE
060 975889-0014 1 STRUT
070 975888-0011 1 STRUT
090 90194-0080 1 SIGN, IDENTIFICATION OF WIRING
095 90459-2928 1 LABEL 60417-2-IEC-5020, COMM. REF. POT.
100 90237-0123 1 LOCK, 1121-U10C
105 90237-0175 1 TURNING HANDLE, 1125-U185-0A
110 90237-0129 1 LOCK CYLINDER, 1109-U6
115 90237-0144 2 GUIDE, 1121-SU540
120 90237-0147 2 LOCKING LUG, NO. 1121-53-0P
125 90237-0324 1 KEY, 1104-02 FOR SQUARE 8 MM
130 90287-0205 4 SCREW
200 312155-0370 4 SCREW DIN 7991 MF6S M6X20 A480
210 312115-0370 4 SCREW ISO4762 M6X20 A4
230 312605-0316 1 HEXAGON NUT, M6M M6 A280
260 315105-0146 2 WASHER BRB5,3X10RFR
270 315105-0153 5 WASHER BRB6,4X12RFR
280 315755-0105 2 RETAINING RING SHAFT DIN 6799 3,2 A2
290 90135-0035 1 EARTH WIRE, L=250 MM 16 MM2
Tetra Pak 674851-1800 EL-CABINET DOOR 2607503-0100 Pos. 010 2607498-0100 4-35 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607498-0100 Pos. 005 COOLING AIR INTAKE Drawing file: 599748-1_1_AB.hpgl
4-36 (44)
ECM: 91327 - 20010319
-
030-02 599752-0000 1 COVER
040-02 599753-0000 4 SPACER
050-02 599760-0000 1 SPACER
060-02 599750-0000 1 FILTER
070-02 599751-0000 1 INSERT
080-02 599755-0000 1 GASKET
200-02 312105-0291 4 SCREW M6S ISO 4017 M4X12 A470
210-02 312105-0295 4 SCREW M6S ISO4017 M4X20 A470
220-02 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
230-02 312605-0312 4 HEXAGON NUT, M6M M4 A280
240-02 315105-0136 8 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 COOLING AIR INTAKE 2607498-0100 Pos. 005 599748-0101 4-37 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
4-38 (44)
ECM: 204879 - 20050224
010 2607523-0000 1 EL-CABINET DOOR
005 599749-0100 1 COOLING AIR OUTLET ........................................ 4-41, 10-9
010 2607501-0000 1 COVER
Common Parts
020 959656-0000 2 COTTER
030 959657-0000 2 HINGE FLANGE
040 959658-0000 2 SPRING
050 975880-0000 2 HINGE FLANGE
060 975889-0014 1 STRUT
070 975888-0011 1 STRUT
100 90237-0123 1 LOCK, 1121-U10C
120 90237-0129 1 LOCK CYLINDER, 1109-U6
130 90237-0144 2 GUIDE, 1121-SU540
140 90237-0147 2 LOCKING LUG, NO. 1121-53-0P
150 90237-0324 1 KEY, 1104-02 FOR SQUARE 8 MM
180 90287-0205 4 SCREW
200 312155-0370 4 SCREW DIN 7991 MF6S M6X20 A480
210 312115-0370 4 SCREW ISO4762 M6X20 A4
230 312605-0316 2 HEXAGON NUT, M6M M6 A280
260 315105-0146 2 WASHER BRB5,3X10RFR
270 315105-0153 6 WASHER BRB6,4X12RFR
290 90135-0035 1 EARTH WIRE, L=250 MM 16 MM2
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607500-0100 Pos. 005 COOLING AIR OUTLET Drawing file: 599749-1_1_AB.hpgl
4-40 (44)
ECM: 176457 - 20041206
-
030 599752-0000 1 COVER
040 599753-0000 4 SPACER
070 599751-0000 1 INSERT
080 599755-0000 1 GASKET
200 312105-0291 4 SCREW M6S ISO 4017 M4X12 A470
220 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
240 315105-0136 4 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 COOLING AIR OUTLET 2607500-0100 Pos. 005 599749-0100 4-41 (44)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607503-0100 Pos. 040 ELECTRICAL CABINET MECH. Drawing file: 2607513-1_1_AA.hpgl
4-42 (44)
ECM: 173387 - 20041115
-
10 2607502-0000 1 CABINET
200 90143-0057 MM 3200 STRIP EMKA 1011-05 21X11MM
210 90143-0057 MM 3200 STRIP EMKA 1011-05 21X11MM
230 90074-0030 3 CABLE CLIPS, D=32 MM
250 90458-0306 12 CABLE GLAND, M16X1,5, NO.5311 1010
260 90458-0307 25 CABLE GLAND, M20X1,5, NO.5311 1020
270 90458-0308 9 CABLE GLAND, M25X1,5, NO.5311 1030
280 90458-0309 3 CABLE GLAND, M32X1,5, NO.5311 1040
290 90458-0310 1 CABLE GLAND, M40X1,5, NO.5311 1050
300 90458-0322 12 NUT, M16X1,5
310 90458-0323 25 NUT, M20X1,5
320 90458-0324 9 NUT, M25X1,5
330 90458-0325 3 NUT, M32X1,5
340 90459-0626 1 DISCETTE BOX FOR TWO 3,5" FLOPPYDISKS
350 90458-0305 2 CABLE GLAND, M12X1,5, NO.5311 1000
360 90458-0321 2 NUT, M12X1,5
370 90144-0072 MM 150 TAPE SCOTCH VHBS 4945 W=12,7MM
530 312605-0312 8 HEXAGON NUT, M6M M4 A280
540 315106-0136 8 WASHER ISO 7089-4-200 HV A4
550 353250-0040 1 GLAND, LOCKNUT M40X1,5
580 90181-0038 MM 650 CABLE DUCT, 40X40MM
590 90181-0054 MM 1262 CABLE DUCT, 60X80MM
Tetra Pak 674851-1800 ELECTRICAL CABINET MECH. 2607503-0100 Pos. 040 2607513-0100 4-43 (44)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 ELECTRIC EQUIPMENT 674851-1800 Pos. 080

5-1 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 080 ELECTRIC EQUIPMENT Drawing file:
5-2 (12)

ECM: 178483 - 20041115
Assembly Drawing:
-
0100 2688002-0100 1 ELECTRICAL DOCUMENT
0200 2688003-0100 1 MACHINE ................................................................... 5-5, 5-7
0300 2688004-0100 1 SPARE PART KIT ............................................................. 5-9
Tetra Pak 674851-1800 ELECTRIC EQUIPMENT 674851-1800 Pos. 080 679242-0500 5-3 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
679242-0500 Pos. 0200 MACHINE Drawing file:
5-4 (12)

ECM: 203909 - 20050224
Assembly Drawing: This list covers pages from 5-4 to 5-7
LONG OVEN 1LAYER NO GROUPING BELT W307 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W100 351150-0407 MM 4000 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY W308 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W202 90459-0466 MM 2500 CABLE SILICABEL 4X6MM² W310 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W220 351120-0264 MM 2500 CABLE SILFLEX SIHF 4X1,5 00460153 W311 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
LONG OVEN 1LAYER GROUPING BELT W312 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W220 351120-0264 MM 2500 CABLE SILFLEX SIHF 4X1,5 00460153 W340 351150-0405 M 5000 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W251 90220-0104 MM 5000 SCR. CABLE 4X1,5MM2 SHORT OVEN 1LAYER NO GROUPING BELT
LONG OVEN 2LAYER NO GROUPING BELT W100 351150-0407 MM 4000 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY
W100 351150-0407 MM 4000 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY SHORT OVEN 2LAYER NO GROUPING BELT
W202 90459-0466 MM 2500 CABLE SILICABEL 4X6MM² W100 351150-0407 MM 4000 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY
W220 351120-0264 MM 2500 CABLE SILFLEX SIHF 4X1,5 00460153 W286 351150-0405 M 10 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W286 351150-0405 M 10 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY W300 351150-0407 M 10 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY
W300 351150-0407 M 10 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY W301 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W301 90458-1737 1 CABLE INCLUDED IN THE MATERIAL W302 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W320 90458-1737 1 CABLE INCLUDED IN THE MATERIAL W340 351150-0405 M 5000 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W340 351150-0405 M 5000 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY Common Parts
LONG OVEN 2LAYER GROUPING BELT 1000 351191-0002 MM CABLE UL 1X0,75 MM2 YELLOW-GREEN
W100 351150-0407 MM 4000 CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY 1010 351191-0004 MM CABLE UL 1X1,5 MM2 YELLOW-GREEN
W202 90459-0466 MM 2500 CABLE SILICABEL 4X6MM² 1020 351191-0007 MM CABLE UL 1X6 MM2 YELLOW-GREEN
W220 351120-0264 MM 2500 CABLE SILFLEX SIHF 4X1,5 00460153 W101 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W251 90220-0104 MM 5000 SCR. CABLE 4X1,5MM2 W102 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W304 90458-1737 1 CABLE INCLUDED IN THE MATERIAL W110 351150-0403 MM 3000 CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY
W305 90458-1737 1 CABLE INCLUDED IN THE MATERIAL W111 351150-0405 MM 5000 CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W306 90458-1737 1 CABLE INCLUDED IN THE MATERIAL W120 351191-0004 MM CABLE UL 1X1,5 MM2 YELLOW-GREEN
Tetra Pak 674851-1800 MACHINE 679242-0500 Pos. 0200 2688003-0100 5-5 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
679242-0500 Pos. 0200 MACHINE Drawing file:
5-6 (12)

ECM: 203909 - 20050224
Assembly Drawing: This list covers pages from 5-4 to 5-7
Common Parts (Cont'd) W292 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W121 351191-0004 MM CABLE UL 1X1,5 MM2 YELLOW-GREEN W901 351150-0406 M 10 CABLE OLFLEX 7X0,75 MM2 LIGHT/GREY
W150 351150-0403 MM CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY W902 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W211 351150-0168 MM 5500 CABLE OLFLEX 4X10 MM2 LIGHT/GREY W904 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
W217 351150-0412 MM 3500 CABLE OLFLEX 3X1,5 MM2 LIGHT/GREY W991 351150-0405 MM CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W218 90220-0034 MM 2000 THERMOCABLE TEX/SITW-20F-KX 2X0,5MM2 W992 351150-0405 MM CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W219 351120-0264 MM 2500 CABLE SILFLEX SIHF 4X1,5 00460153 W993 351150-0405 MM CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W221 351150-0413 MM 3000 CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY W994 351150-0405 MM CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY
W222 351150-0413 MM 6000 CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY W999 351191-0009 MM 1000 CABLE UL 1X16 MM2 YELLOW-GREEN
W223 351150-0413 MM 5000 CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY
W227 90458-1737 1 CABLE INCLUDED IN THE MATERIAL
Tetra Pak 674851-1800 MACHINE 679242-0500 Pos. 0200 2688003-0100 5-7 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
679242-0500 Pos. 0300 SPARE PART KIT Drawing file:
5-8 (12)

ECM: 203165 - 20050224
Assembly Drawing:
-
0010 90036-0057 4 LIGHT BULB, BA9S 28V
0020 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
0030 90233-0030 2 TUBE FUSE, 30A
0040 779910-0101 1 PADLOCK
0050 2591916-0101 1 INSTALLATION KIT ........................................................ 5-11
Tetra Pak 674851-1800 SPARE PART KIT 679242-0500 Pos. 0300 2688004-0100 5-9 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2688004-0100 Pos. 0050 INSTALLATION KIT Drawing file: 2591916-1_1_AA.hpgl
5-10 (12)
ECM: 126755 - 20030226
-
500 90458-0307 8 CABLE GLAND, M20X1,5, NO.5311 1020
510 90458-0308 2 CABLE GLAND, M25X1,5, NO.5311 1030
520 353001-0113 100 END SLEEVE 0,75MM2
530 353001-0114 20 END SLEEVE 1,5MM2
540 353250-0020 8 GLAND, LOCKNUT M20X1,5
550 353250-0025 2 GLAND, LOCKNUT M25X1,5
560 359000-0300 30 MARKING CO1/3"0"
570 359000-0301 30 MARKING CO1/3"1"
580 359000-0302 30 MARKING CO1/3"2"
590 359000-0303 30 MARKING CO1/3"3"
600 359000-0304 30 MARKING CO1/3"4"
610 359000-0305 30 MARKING CO1/3"5"
620 359000-0306 30 MARKING CO1/3"6"
630 359000-0307 30 MARKING CO1/3"7"
640 359000-0308 30 MARKING CO1/3"8"
650 359000-0309 30 MARKING CO1/3"9"
660 359009-0800 1 CABLE MARKER, YELLOW, PK 2/4, 0-9
670 359000-0722 10 MARKING CO1/3"W"
680 359000-0721 10 MARKING CO1/3"V"
690 359000-0720 10 MARKING CO1/3"U"
710 352113-0101 100 CLIP STRIP, 92X2,5 MM
720 353001-0115 20 END SLEEVE 2,5/14
730 359009-0222 20 CABLE MARKER, YELLOW, PK 2/4, W
Tetra Pak 674851-1800 INSTALLATION KIT 2688004-0100 Pos. 0050 2591916-0101 5-11 (12)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 PANEL 674851-1800 Pos. 090

6-1 (14)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 090 PANEL Drawing file: 675310-1_1_AA.hpgl
6-2 (14)
ECM: 189699 - 20041115
-
010 2636805-0100 1 PANEL ............................................................................... 6-5
Tetra Pak 674851-1800 PANEL 674851-1800 Pos. 090 675310-0100 6-3 (14)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
675310-0100 Pos. 010 PANEL Drawing file: 2636805-1_1_AA.hpgl
6-4 (14)
ECM: 161858 - 20040614
-
010 2636806-0100 1 CABINET ........................................................................... 6-7
020 2636808-0100 1 PANEL DOOR ................................................................. 6-11
Tetra Pak 674851-1800 PANEL 675310-0100 Pos. 010 2636805-0100 6-5 (14)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
6-6 (14)
ECM: 161856 - 20040614
-
010 2636811-0100 1 TERMINAL X010 ................................................................6-9
020 1021374-0000 1 BRACKET
030 2636807-0000 1 PANEL DOOR
320 90077-0328 MM 200 RAIL TS15/5
330 90135-0035 1 EARTH WIRE, L=250 MM 16 MM2
340 90194-0152 1 SIGN, EARTH
500 312121-0285 2 SCREW ISO 1207 M4X6 4.8 - 5.8 Z.PL.
520 315101-0136 2 WASHER BRB, 4,3/8 H=0,8
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
6-8 (14)
ECM: 161857 - 20040614
-
310 90459-0606 2 MARKING PLATES 5-FW E1-E50
320 90135-0026 2 EARTH TERMINAL, 3802.6
500 359011-0821 2 SET OF SIGNS 6-FW 1-50
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2636805-0100 Pos. 020 PANEL DOOR Drawing file: 2636808-1_1_AB.hpgl
6-10 (14)
ECM: 204378 - 20050224
- H016 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
010 2636809-0000 1 PANEL DOOR H017 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
020 2636810-0000 1 COVER H018 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
030 555334-0000 1 HOLDER H019 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
040 555077-0000 1 PLATE H020 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
050 555287-0000 6 SPACER H021 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
090 959656-0000 2 COTTER H026 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
100 959657-0000 2 HINGE FLANGE H027 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
1000 90097-0026 CABLE SHOE H031 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
1010 90097-0027 CABLE SHOE H032 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
1020 351160-0102 M CABLE (1UNIT = 100M) H033 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
1030 353001-0103 END SLEEVE 0,75 MM2 H034 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
110 959658-0000 2 SPRING S005 90458-1651 1 EMERGENCY STOP, ZB4-BS-844 ZB4-BZ-104
120 975849-0000 5 SPACER
130 975880-0000 2 HINGE FLANGE
140 583399-0102 1 PUSHBUTTON BOARD .................................................. 6-13
150 68699-0101 1 MULTIPLEXER CARD 56LED
010 578860-0000 1 CIRCUIT BOARD
020 578861-0001 COMPONENTS WITHOUT TP-NO
160 975958-0000 1 PLATE
170 2607512-0000 1 LABEL
320 90181-0037 MM 360 CABLE DUCT, 25X40MM
330 90194-0152 1 SIGN, EARTH
340 90237-0080 2 LOCK
370 90287-0205 4 SCREW
390 90036-0057 3 LIGHT BULB, BA9S 28V
500 312115-0370 4 SCREW ISO4762 M6X20 A4
550 315105-0153 4 WASHER BRB6,4X12RFR
H001 90124-0027 1 LAMP HOLDER BA9S
H015 90038-0045 1 LIGHT DIODE, 24-60V YELLOW
Tetra Pak 674851-1800 PANEL DOOR 2636805-0100 Pos. 020 2636808-0100 6-11 (14)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2636808-0100 Pos. 140 PUSHBUTTON BOARD Drawing file:
6-12 (14)

ECM: --
Assembly Drawing:
- S09H 90064-0111 1 PUSH BUTTON, WHITE
0001 582084-0000 1 PRINTED CIRCUIT BOARD S10H 90064-0111 1 PUSH BUTTON, WHITE
H006 90038-0047 1 DIODE S11H 90064-0111 1 PUSH BUTTON, WHITE
H011 90038-0047 1 DIODE X011 90077-0099 60 PCB TERMINAL GSE 5/1 1-POLE
H012 90038-0047 1 DIODE X011 :1 90077-0325 1 END PLATE
H013 90038-0047 1 DIODE X011 :2 359011-0807 1 MARKING PLATES 5-FW 1-50
KA,K B 90129-0016 1 CONNECTOR, SCOTT 52072 S-070 B-00 X011 :3 359011-0808 1 MARKING PLATES 5-FW 51-100
R001 90121-0121 1 RESISTANCE FIXED, 0,56 KOHM, 2 W
ROO6 90121-0121 1 RESISTANCE FIXED, 0,56 KOHM, 2 W
S01H 90064-0111 1 PUSH BUTTON, WHITE
Tetra Pak 674851-1800 PUSHBUTTON BOARD 2636808-0100 Pos. 140 583399-0102 6-13 (14)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 REGULAR ACCESSORIES 674851-1800 Pos. 050

7-1 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 050 REGULAR ACCESSORIES Drawing file: 674809-1_1_AB.hpgl
7-2 (42)
ECM: 186889 - 20041115
LEFT OUT LONG OVEN, RIGHT OUT LONG OVEN
040 553782-0500 1 DISCHARGE DEVICE ....................................................... 7-5
110 2706819-0000 1 INSTALLATION DRAWING
LEFT OUT SHORT OVEN, RIGHT OUT SHORT OVEN
040 553782-0500 1 DISCHARGE DEVICE ....................................................... 7-5
STRAIGHT OUT LONG OVEN
020 2666262-0100 1 COOLING UNIT ...............................................................7-11
080 297273-0300 1 ROLLER CONVEYOR ..................................................... 7-17
STRAIGHT OUT LONG OVEN GROUPING BELT
020 2666262-0100 1 COOLING UNIT ...............................................................7-11
080 297273-0300 1 ROLLER CONVEYOR ..................................................... 7-17
STRAIGHT OUT SHORT OVEN
020 2666262-0100 1 COOLING UNIT ...............................................................7-11
080 297273-0300 1 ROLLER CONVEYOR ..................................................... 7-17
Common Parts
010 2686757-0100 1 PNEUMATIC CHART ...................................................... 7-19
030 2581888-0100 1 CHAIN TENSIONER ....................................................... 7-21
050 2656144-0100 1 CAUTION SIGN LIST ...................................................... 7-29
060 723891-0300 1 START-UP KIT ................................................................ 7-31
070 2686763-0100 1 CONVEYOR PARTS ....................................................... 7-35
090 593682-0000 1 MACHINE SIGN EEA(CE-MARK)
100 311520-0329 4 RIVET, BLANK 2,4X8
120 2724977-0000 1 FILM SPECIFICATION
Tetra Pak 674851-1800 REGULAR ACCESSORIES 674851-1800 Pos. 050 674809-1100 7-3 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 040 DISCHARGE DEVICE Drawing file: 553782-2_1_AA.hpgl
7-4 (42)
ECM: 186588 - 20041115
-
010 723744-0200 1 ATTACHMENT .................................................................. 7-7
020 573312-0200 1 DISCHARGER ...................................................................7-9
030 2666262-0100 1 COOLING UNIT ...............................................................7-11
Tetra Pak 674851-1800 DISCHARGE DEVICE 674809-1100 Pos. 040 553782-0500 7-5 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
553782-0500 Pos. 010 ATTACHMENT Drawing file: 723744-2_1_AA.hpgl
7-6 (42)
ECM: --
-
010 1086305-0003 4 SLIDE RAIL
020 1086222-0000 2 JOINT PIECE
030 1086298-0000 2 COVERING PLATE
040 723745-0000 1 CANTILEVER
050 723746-0000 1 CANTILEVER
060 547133-0003 2 PIPE
070 547133-0005 2 PIPE
080 548246-0000 2 BRACKET
090 548247-0000 2 BRACKET
095 1086180-0000 15 SLEEVE
100 1086223-0000 1 SPACER PIECE
110 723747-0001 2 PIPE
120 1086176-0001 3 HOLDER
130 1086176-0002 2 HOLDER
140 723749-0000 5 BRACKET
145 571446-0000 2 HOLDER
150 723750-0000 5 DOWEL
155 571447-0000 1 SHAFT
160 723751-0001 9 SPACER
180 312105-0368 5 SCREW M6S ISO 4017 M6X16 A480
190 312105-0370 13 SCREW M6S ISO 4017 M6X20 A480
200 312105-0449 12 SCREW M6S ISO 4017 M8X16 A480
210 312105-0455 2 SCREW M6S ISO 4017 M8X30 A480
215 312105-0457 4 SCREW M6S ISO 4014 M8X35 A480
220 312105-0475 9 SCREW M6S ISO 4014 M8X120 A480
230 315105-0153 25 WASHER BRB6,4X12RFR
240 315105-0165 35 WASHER BRB8,4X16RFR
250 315125-0153 8 WASHER TBRSB 6,4X22X4 A4
260 321120-0110 2 BEARING BUSHING W/O FL, 12X14X12 MM
Tetra Pak 674851-1800 ATTACHMENT 553782-0500 Pos. 010 723744-0200 7-7 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
553782-0500 Pos. 020 DISCHARGER Drawing file: 573312-2_1_AA.hpgl
7-8 (42)
ECM: --
PACKAGE-CONV 415 318209-0181 1 CONNECTING LINK SINGLE 3/8"
220 2 573472-0000 1 SHEET 420 90240-0256 8 FLANGE BUSHING, 6X8X10 MM
UNIT-CONV 430 321308-0201 2 BALL BEARING, 12X28X8 MM
220 1 573313-0000 1 SHEET
Common Parts
010 532289-0000 1 PLATE
030 532288-0000 2 ANGLE
040 582264-0000 4 ROLL
050 541585-0000 1 SHAFT
060 582341-0000 1 REEL HOLDER
070 582342-0000 1 REEL HOLDER
080 541588-0000 1 PROTECTION
090 541589-0000 1 PROTECTION
100 255503-0000 1 SPROCKET
120 582265-0000 4 GEAR WHEEL
130 533504-0000 2 GEAR WHEEL
140 533508-0000 1 GEAR WHEEL
150 533509-0000 2 SHAFT
170 533520-0000 1 SPROCKET
180 536819-0000 1 ECCENTRIC
190 541590-0000 1 SPACER
200 547676-0000 1 WHEEL
210 547677-0000 1 SHAFT
230 573314-0000 1 PROTECTION
240 312105-0364 2 SCREW M6S ISO 4017 M6X10 A480
250 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
260 312105-0370 8 SCREW M6S ISO 4017 M6X20 A480
270 312105-0372 1 SCREW M6S ISO 4017 M6X25 A480
280 312151-0287 4 SCREW EN 10642 MF6S M4X8 10.9 EL.PL
290 312318-0360 1 SCREW ISO4029 M6X6 A4
300 312318-0364 1 SCREW ISO4029 M6X10 A4
340 315105-0153 17 WASHER BRB6,4X12RFR
350 315105-0178 1 WASHER BRB13X24RFR
360 315105-0136 4 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 DISCHARGER 553782-0500 Pos. 020 573312-0200 7-9 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
553782-0500 Pos. 030 COOLING UNIT Drawing file: 2666262-1_1_AB.hpgl
7-10 (42)
ECM: 190984 - 20041115
LINF SHORT
S108 2703569-0100 1 EMERGENCY STOP ....................................................... 7-13
S112 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
RINF LONG, LINF LONG
S108 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
S112 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
RINF SHORT
S108 2666280-0100 1 EMERGENCY STOP ..............................................2-35, 7-15
S112 2703569-0100 1 EMERGENCY STOP ....................................................... 7-13
Common Parts
010 2666264-0000 1 FAN HOUSING
020 2666263-0000 1 FAN CASING
030 2666265-0000 2 MOUNTING SHEET
300 90264-0022 1 FAN
310 90458-0307 1 CABLE GLAND, M20X1,5, NO.5311 1020
320 90458-0323 1 NUT, M20X1,5
500 315105-0153 4 WASHER BRB6,4X12RFR
510 312105-0447 4 SCREW M6S ISO 4017 M8X12 A480
520 312105-0449 2 SCREW M6S ISO 4017 M8X16 A480
550 315105-0165 6 WASHER BRB8,4X16RFR
560 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
Tetra Pak 674851-1800 COOLING UNIT 553782-0500 Pos. 030 2666262-0100 7-11 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666262-0100 Pos. S108 EMERGENCY STOP Drawing file: 2703569-1_1_AA.hpgl
7-12 (42)
ECM: 190813 - 20041115
-
010 2703568-0000 1 BRACKET
300 90458-0307 1 CABLE GLAND, M20X1,5, NO.5311 1020
310 90459-1130 1 EM. STOP XAL-K178F
510 312125-0289 2 SCREW ISO 1207 M4X10 A4
520 315105-0146 4 WASHER BRB5,3X10RFR
530 353250-0020 1 GLAND, LOCKNUT M20X1,5
540 312105-0327 4 SCREW M6S ISO 4017 M5X12 A480
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2666262-0100 Pos. S112 EMERGENCY STOP Drawing file: 2666280-1_1_AB.hpgl
7-14 (42)
ECM: 190812 - 20041115
-
010 2659245-0000 1 BRACKET
300 90458-0307 1 CABLE GLAND, M20X1,5, NO.5311 1020
310 90459-1130 1 EM. STOP XAL-K178F
510 312125-0289 2 SCREW ISO 1207 M4X10 A4
520 315105-0146 4 WASHER BRB5,3X10RFR
530 353250-0020 1 GLAND, LOCKNUT M20X1,5
540 312105-0327 4 SCREW M6S ISO 4017 M5X12 A480
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 080 ROLLER CONVEYOR Drawing file: 297273-1_1_AA.tif
7-16 (42)
ECM: 26515 - 20010223
-
010 1353593-0000 1 ROLLER CONVEYOR
020 297275-0000 1 SUPPORT LEG
030 297276-0000 1 ROD
050 278649-0000 1 SUPPORT
060 208944-0000 2 FOOT
100 312105-0368 10 SCREW M6S ISO 4017 M6X16 A480
110 312105-0449 3 SCREW M6S ISO 4017 M8X16 A480
180 312605-0316 10 HEXAGON NUT, M6M M6 A280
200 312605-0328 2 HEXAGON NUT, M6M M24 A280
300 315105-0153 10 WASHER BRB6,4X12RFR
310 315105-0165 3 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 ROLLER CONVEYOR 674809-1100 Pos. 080 297273-0300 7-17 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 010 PNEUMATIC CHART Drawing file:
7-18 (42)

ECM: 173431 - 20040614
Assembly Drawing:
1 LAYER
2 LAYER
Tetra Pak 674851-1800 PNEUMATIC CHART 674809-1100 Pos. 010 2686757-0100 7-19 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 030 CHAIN TENSIONER Drawing file: 2581888-1_1_AA.hpgl
7-20 (42)
ECM: 127814 - 20030610
-
010 2581892-0100 1 RAILING ..................................................................7-23, 7-25
015 2604031-0100 1 PROTECTION PIPE ........................................................ 7-27
020 476975-0000 2 WHEEL
030 499777-0000 2 PLUG
040 531499-0000 2 BEARING SLEEVE
050 532404-0000 2 SPRING
060 547183-0000 2 SLIDE SHEET
070 547191-0002 4 SPACER
080 547192-0000 1 PLUG
090 547194-0000 2 SCREW
100 549659-0000 1 SLEEVE
110 722884-0000 2 SIDE PLATE
120 722885-0000 2 END SECTION PIECE
140 723858-0000 3 SHAFT
150 723859-0000 1 WHEEL
160 1086180-0000 16 SLEEVE
170 1086223-0000 2 SPACER PIECE
180 1086383-0000 1 JOINT PIECE
190 1353504-0000 2 SLIDE RAIL
200 1353505-0000 2 SLIDE RAIL
210 1353506-0000 2 SLIDE RAIL
220 1516120-0000 1 COVERING PLATE
230 2604018-0000 4 SPACER
240 2604036-0000 4 SPACER
500 312105-0366 20 SCREW M6S ISO 4017 M6X12 A480
510 312105-0449 16 SCREW M6S ISO 4017 M8X16 A480
520 312605-0320 2 HEXAGON NUT, M6M M10 A280
530 315105-0153 20 WASHER BRB6,4X12RFR
540 315105-0165 16 WASHER BRB8,4X16RFR
550 315105-0173 4 WASHER BRB10,5X22RFR
Tetra Pak 674851-1800 CHAIN TENSIONER 674809-1100 Pos. 030 2581888-0100 7-21 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581888-0100 Pos. 010 RAILING Drawing file: 2581892-1_1_AC.hpgl
7-22 (42)
ECM: 192412 - 20041115
LEFT INFEED AND PACKWIDTH 120-149 (See drawing on page: 7-22)
010 2581905-0000 2 PIPE
020 2581913-0000 2 PIPE
050 2581910-0000 6 HOLDER
060 2604014-0000 4 HOLDER
LEFT INFEED AND PACKWIDTH 150-240, LEFT INFEED AND PACKWIDTH 241-265 (See drawing on page: 7-24)
010 722901-0002 2 PIPE
020 722901-0003 2 PIPE
050 2581910-0000 4 HOLDER
060 2604010-0000 4 HOLDER
RIGHT INFEED AND PACKWIDTH 120-149 (See drawing on page: 7-22)
010 2581905-0000 2 PIPE
020 2581913-0000 2 PIPE
050 2581910-0000 6 HOLDER
060 2604014-0000 4 HOLDER
RIGHT INFEED AND PACKWIDTH 150-240, RIGHT INFEED AND PACKWIDTH 241-265 (See drawing on page:
7-24)
010 722901-0002 2 PIPE
020 722901-0003 2 PIPE
050 2581910-0000 4 HOLDER
060 2604010-0000 4 HOLDER
Common Parts
030 1086637-0000 4 SLEEVE
040 1086638-0000 4 DOLLY
070 2604011-0000 4 STUD SCREW
080 2604029-0000 2 SLEEVE
090 2604030-0000 2 STUD SCREW
100 2604034-0000 2 SLEEVE
110 2604035-0000 2 STUD SCREW
510 312115-0370 8 SCREW ISO4762 M6X20 A4
540 312605-0318 4 HEXAGON NUT, M6M M8 A280
550 315105-0153 8 WASHER BRB6,4X12RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581888-0100 Pos. 010 RAILING Drawing file: 2581892-2_1_AB.hpgl
7-24 (42)
ECM: 192412 - 20041115
LEFT INFEED AND PACKWIDTH 120-149 (See drawing on page: 7-22)
010 2581905-0000 2 PIPE
020 2581913-0000 2 PIPE
050 2581910-0000 6 HOLDER
060 2604014-0000 4 HOLDER
LEFT INFEED AND PACKWIDTH 150-240, LEFT INFEED AND PACKWIDTH 241-265 (See drawing on page: 7-24)
010 722901-0002 2 PIPE
020 722901-0003 2 PIPE
050 2581910-0000 4 HOLDER
060 2604010-0000 4 HOLDER
RIGHT INFEED AND PACKWIDTH 120-149 (See drawing on page: 7-22)
010 2581905-0000 2 PIPE
020 2581913-0000 2 PIPE
050 2581910-0000 6 HOLDER
060 2604014-0000 4 HOLDER
RIGHT INFEED AND PACKWIDTH 150-240, RIGHT INFEED AND PACKWIDTH 241-265 (See drawing on page:
7-24)
010 722901-0002 2 PIPE
020 722901-0003 2 PIPE
050 2581910-0000 4 HOLDER
060 2604010-0000 4 HOLDER
Common Parts
030 1086637-0000 4 SLEEVE
040 1086638-0000 4 DOLLY
070 2604011-0000 4 STUD SCREW
080 2604029-0000 2 SLEEVE
090 2604030-0000 2 STUD SCREW
100 2604034-0000 2 SLEEVE
110 2604035-0000 2 STUD SCREW
510 312115-0370 8 SCREW ISO4762 M6X20 A4
540 312605-0318 4 HEXAGON NUT, M6M M8 A280
550 315105-0153 8 WASHER BRB6,4X12RFR
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2581888-0100 Pos. 015 PROTECTION PIPE Drawing file: 2604031-1_1_AA.hpgl
7-26 (42)
ECM: 131539 - 20030610
-
010 484701-0000 8 SHUTTER
020 548246-0000 2 BRACKET
030 548247-0000 2 BRACKET
040 1020634-0001 4 HOLDER
050 1294794-0000 4 SUPPORT BAR
060 2604032-0000 2 BRACKET
500 312105-0370 4 SCREW M6S ISO 4017 M6X20 A480
510 312105-0453 2 SCREW M6S ISO 4017 M8X25 A480
520 312605-0316 4 HEXAGON NUT, M6M M6 A280
530 315105-0153 8 WASHER BRB6,4X12RFR
540 315105-0165 2 WASHER BRB8,4X16RFR
Tetra Pak 674851-1800 PROTECTION PIPE 2581888-0100 Pos. 015 2604031-0100 7-27 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 050 CAUTION SIGN LIST Drawing file: 2656144-1_1_AB.hpgl
7-28 (42)
ECM: 189700 - 20041115
ANSI
020 359715-0100 10 WARNING SIGN ANSI(H), ELECTRIC SHOCK
040 359725-0117 9 WARNING SIGN ANSI (V), HOT SURFACE
060 90459-2232 1 WARNING SIGN ANSI (H), DO NOT WASH
ISO
020 359705-0015 10 WARNING SIGN ISO, RISK OF ELECTRIC SHOCK
040 359710-0001 9 WARNING SIGN ISO, HOT SURFACE
060 90459-2265 1 PROHIBITION SIGN ISO, DO NOT WASH
Tetra Pak 674851-1800 CAUTION SIGN LIST 674809-1100 Pos. 050 2656144-0100 7-29 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 060 START-UP KIT Drawing file:
7-30 (42)

ECM: --
Assembly Drawing:
-
300 90143-0061 M 5 STRIP
R101 284518-0200 1 TPC BAR ......................................................................... 7-33
Tetra Pak 674851-1800 START-UP KIT 674809-1100 Pos. 060 723891-0300 7-31 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
723891-0300 Pos. R101 TPC BAR Drawing file: 284518-2_1_AA.tif
7-32 (42)
ECM: --
-
010 269493-0000 1 RAIL
020 256884-0000 2 CONTACT PLATE
030 283067-0000 2 CONTACT LINK
050 90367-0004 2 RIVET
Tetra Pak 674851-1800 TPC BAR 723891-0300 Pos. R101 284518-0200 7-33 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674809-1100 Pos. 070 CONVEYOR PARTS Drawing file: 2686763-1_1_AB.hpgl
7-34 (42)
ECM: 191999 - 20041115
DISCHARGE CONVEYOR ROLLER CONVEYOR
010 2686762-0100 1 QUEUE GUARD .............................................................. 7-37
DISCHARGE CONVEYOR TCF56
010 2686761-0100 1 QUEUE GUARD .............................................................. 7-39
DISCHARGE CONVEYOR TUC54
010 2686760-0100 1 QUEUE GUARD .............................................................. 7-41
Tetra Pak 674851-1800 CONVEYOR PARTS 674809-1100 Pos. 070 2686763-0100 7-35 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2686763-0100 Pos. 010 QUEUE GUARD Drawing file: 2686762-1_1_AA.hpgl
7-36 (42)
ECM: 173991 - 20040615
-
010 2564088-0000 2 PHOTOCELL BRACKET
500 312105-0366 4 SCREW M6S ISO 4017 M6X12 A480
510 312125-0295 4 SCREW ISO 1207 M4X20 A4
520 315105-0136 4 WASHER BRB4,3XRFR
530 315105-0153 4 WASHER BRB6,4X12RFR
B125.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B125.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Tetra Pak 674851-1800 QUEUE GUARD 2686763-0100 Pos. 010 2686762-0100 7-37 (42)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
7-38 (42)
ECM: 173990 - 20040615
-
010 1138685-0000 2 COVER
020 1138684-0000 2 HOLDER
030 1138130-0000 2 LOCKING BLOCK
500 312105-0364 2 SCREW M6S ISO 4017 M6X10 A480
510 312125-0293 4 SCREW ISO 1207 M4X16 A4
520 312155-0370 2 SCREW DIN 7991 MF6S M6X20 A480
530 312605-0316 2 HEXAGON NUT, M6M M6 A280
540 315105-0136 4 WASHER BRB4,3XRFR
550 315105-0153 4 WASHER BRB6,4X12RFR
B125.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B125.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
7-40 (42)
ECM: 173989 - 20040615
-
010 1086175-0000 2 HOLDER
020 1086996-0000 2 COVER
030 532412-0000 2 SPRING
500 312105-0329 4 SCREW M6S ISO 4017 M5X16 A480
510 312125-0293 4 SCREW ISO 1207 M4X16 A4
520 312605-0314 4 HEXAGON NUT, M6M M5 A280
530 315105-0136 4 WASHER BRB4,3XRFR
540 315105-0146 8 WASHER BRB5,3X10RFR
B125.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B125.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 OPTIONAL EQUIPMENT 674851-1800 Pos. 040

8-1 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 040 OPTIONAL EQUIPMENT Drawing file: 674871-1_1_AB.hpgl
8-2 (12)
ECM: 206690 - 20050308
COOLING SYSTEM AC
050 2703567-0100 1 COOLING SYSTEM ............................................... 8-5, 10-15
HORIZONTAL PERFORATING
010 2636130-0100 1 KNIFE .................................................................................8-7
HOSE BRAKE INFEED CONVEYOR
060 2747964-0100 1 HOSE BRAKE ....................................................................8-9
MIST LUBRICATION
030 90459-5052 1 MIST LUBRICATOR, MS4-LOE-1/4-R
POSITIONING DEVICE
040 722258-0700 1 POSITIONING DEVICE ...................................................8-11
Tetra Pak 674851-1800 OPTIONAL EQUIPMENT 674851-1800 Pos. 040 674871-0600 8-3 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674871-0600 Pos. 050 COOLING SYSTEM Drawing file: 2703567-1_1_AA.hpgl
8-4 (12)
ECM: 189697 - 20041115
-
300 90181-0035 MM 250 CABLE DUCT, 25X30MM
310 90422-0049 1 COOLER, SK 3203.100
500 312605-0314 2 HEXAGON NUT, M6M M5 A280
510 315105-0146 2 WASHER BRB5,3X10RFR
Tetra Pak 674851-1800 COOLING SYSTEM 674871-0600 Pos. 050 2703567-0100 8-5 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674871-0600 Pos. 010 KNIFE Drawing file: 2636130-1_1_AB.hpgl
8-6 (12)
ECM: 185863 - 20041115
- 630 312605-0316 1 HEXAGON NUT, M6M M6 A280
010 265650-0000 2 KNIFE BLADE 640 312605-0320 2 HEXAGON NUT, M6M M10 A280
020 265654-0000 2 SIDE PLATE 650 315105-0136 8 WASHER BRB4,3XRFR
030 265655-0000 1 RUBBER 660 315105-0146 16 WASHER BRB5,3X10RFR
040 265656-0000 2 RIM 670 315105-0153 10 WASHER BRB6,4X12RFR
050 265657-0000 2 LUG 680 315125-0165 2 WASHER TBRSB 8,4X26X5 A4
060 265668-0000 2 AXLE PIN 690 315400-0004 M 8 TUBE PUN-H-8X1,25-BL
070 265669-0000 2 WASHER 695 315400-0010 M TUBE PUN-H-12X2-BL
080 265670-0000 2 STOP 700 315755-0110 4 RETAINING RING SHAFT DIN 6799 9 A2
090 292341-0000 1 HEAD RAIL 710 350001-0006 2 PUSH-IN FITTING QS-F-G1/8-6
100 451404-0000 1 SHAFT STAINLESS 720 350005-0005 2 PUSH-IN T-FITTING QST-F-12
110 457288-0000 2 HOLDER Y105 90458-1194 1 MONOSTABLE VALVE 5/2
120 457289-0000 2 BARRIER
150 2636128-0000 1 BEAM
160 2636129-0000 2 HOLDER
170 2636131-0000 1 SUPPORT BAR
180 2636132-0000 1 KNIFE HOLDER
190 2636133-0000 2 BEARING
200 2636135-0000 1 SUPPORT
210 2636138-0000 1 SHAFT
220 2636140-0000 1 LACE
230 2636145-0000 2 SLEEVE
500 312105-0289 8 SCREW M6S ISO 4017 M4X10 A470
510 312105-0327 16 SCREW M6S ISO 4017 M5X12 A480
520 312105-0368 7 SCREW M6S ISO 4017 M6X16 A480
530 312105-0372 1 SCREW M6S ISO 4017 M6X25 A480
540 312105-0382 2 SCREW M6S ISO 4014 M6X60 A480
550 312105-0449 2 SCREW M6S ISO 4017 M8X16 A480
560 312115-0331 4 SCREW ISO4762 M5X20 A4
570 312115-0343 4 SCREW ISO4762 M5X60 A4
580 312115-0370 4 SCREW ISO4762 M6X20 A4
590 312115-0374 4 SCREW ISO4762 M6X30 A4
600 312115-0457 4 SCREW ISO4762 M8X35 A4
610 312155-0368 4 SCREW DIN 7991 MF6S M6X16 A480
620 312318-0366 2 SCREW ISO4029 M6X12 A4
Tetra Pak 674851-1800 KNIFE 674871-0600 Pos. 010 2636130-0100 8-7 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674871-0600 Pos. 060 HOSE BRAKE Drawing file:
8-8 (12)

ECM: 206668 - 20050308
Assembly Drawing:
HOSE BRAKE TCF56 INFEED CONVEYOR
010 1138371-0101 1 HOSE BRAKE
HOSE BRAKE TUC54 INFEED CONVEYOR
020 1359066-0101 1 HOSE BRAKE EL. W-OUT CAB.
Tetra Pak 674851-1800 HOSE BRAKE 674871-0600 Pos. 060 2747964-0100 8-9 (12)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674871-0600 Pos. 040 POSITIONING DEVICE Drawing file: 722258-6_1_AA.hpgl
8-10 (12)
ECM: 194578 - 20041220
FEEDSIDE = LEFT
110 2703550-0000 1 COVER
FEEDSIDE = RIGHT
110 2703551-0000 1 COVER
Common Parts
200 722937-0000 1 COVER
210 2703545-0000 1 PLATE
220 278657-0000 1 PLATE
230 278658-0000 1 SHEET
240 278659-0000 2 GUIDE
250 278660-0000 2 SLIDE RAIL
260 278661-0000 2 MOUNTING BAR
270 2703547-0000 1 BRACKET
280 2703548-0001 1 SPACER
285 2703548-0002 2 SPACER
290 2703549-0000 1 SHEET
300 722183-0000 2 HOLDER
430 315400-0001 M 8 TUBE PUN-H-6X1-BL
440 315400-0010 M TUBE PUN-H-12X2-BL
500 90335-0027 2 COMP. SPRING 22170, 1,25X9,25X33
540 312101-0342 2 SCREW M6S M5X55 FZB
550 312105-0289 4 SCREW M6S ISO 4017 M4X10 A470
580 312105-0331 6 SCREW M6S ISO 4017 M5X20 A480
590 312105-0368 4 SCREW M6S ISO 4017 M6X16 A480
620 312115-0366 10 SCREW ISO4762 M6X12 A4
630 312115-0368 4 SCREW ISO4762 M6X16 A4
660 312155-0329 6 SCREW DIN 7991 MF6S M5X16 A480
700 315105-0136 4 WASHER BRB4,3XRFR
710 315105-0146 8 WASHER BRB5,3X10RFR
720 315105-0153 4 WASHER BRB6,4X12RFR
730 315111-0178 1 WASHER PLAIN, TBRB 13/24 H=4
B157.1 90232-0127 1 PH.CELL E3S-CT61-L-5-5M
B157.2 90232-0104 1 PH.CELL E3S-CT61-D-5M
Tetra Pak 674851-1800 POSITIONING DEVICE 674871-0600 Pos. 040 722258-0700 8-11 (12)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 ACCESSORIES 674851-1800 Pos. 040

9-1 (4)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 040 ACCESSORIES Drawing file: 675308-1_1_AA.hpgl
9-2 (4)
ECM: 174472 - 20040615
-
300 90245-0023 1 MATCHING TRANSF. 37KVA
Tetra Pak 674851-1800 ACCESSORIES 674851-1800 Pos. 040 675308-0100 9-3 (4)
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 OPTIONAL KIT 674851-1800 Pos. 070

10-1 (16)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
674851-1800 Pos. 070 OPTIONAL KIT Drawing file: 675311-1_1_AA.hpgl
10-2 (16)
ECM: 175595 - 20041115
010 2694054-0100 1 COOLING SYSTEM ........................................................ 10-5
Tetra Pak 674851-1800 OPTIONAL KIT 674851-1800 Pos. 070 675311-0100 10-3 (16)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
10-4 (16)
ECM: 175594 - 20041115
ANSI
100 90459-2232 1 WARNING SIGN ANSI (H), DO NOT WASH
ISO
100 90459-2265 1 PROHIBITION SIGN ISO, DO NOT WASH
Common Parts
010 2607500-0100 1 EL-CABINET DOOR .............................................. 4-39, 10-7
020 2607498-0100 1 EL-CABINET DOOR ............................................ 4-35, 10-11
030 2703567-0100 1 COOLING SYSTEM ............................................... 8-5, 10-15
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
10-6 (16)
ECM: 204879 - 20050224
010 2607523-0000 1 EL-CABINET DOOR
005 599749-0100 1 COOLING AIR OUTLET ........................................ 4-41, 10-9
010 2607501-0000 1 COVER
Common Parts
020 959656-0000 2 COTTER
030 959657-0000 2 HINGE FLANGE
040 959658-0000 2 SPRING
050 975880-0000 2 HINGE FLANGE
060 975889-0014 1 STRUT
070 975888-0011 1 STRUT
100 90237-0123 1 LOCK, 1121-U10C
120 90237-0129 1 LOCK CYLINDER, 1109-U6
130 90237-0144 2 GUIDE, 1121-SU540
140 90237-0147 2 LOCKING LUG, NO. 1121-53-0P
150 90237-0324 1 KEY, 1104-02 FOR SQUARE 8 MM
180 90287-0205 4 SCREW
200 312155-0370 4 SCREW DIN 7991 MF6S M6X20 A480
210 312115-0370 4 SCREW ISO4762 M6X20 A4
230 312605-0316 2 HEXAGON NUT, M6M M6 A280
260 315105-0146 2 WASHER BRB5,3X10RFR
270 315105-0153 6 WASHER BRB6,4X12RFR
290 90135-0035 1 EARTH WIRE, L=250 MM 16 MM2
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607500-0100 Pos. 005 COOLING AIR OUTLET Drawing file: 599749-1_1_AB.hpgl
10-8 (16)
ECM: 176457 - 20041206
-
030 599752-0000 1 COVER
040 599753-0000 4 SPACER
070 599751-0000 1 INSERT
080 599755-0000 1 GASKET
200 312105-0291 4 SCREW M6S ISO 4017 M4X12 A470
220 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
240 315105-0136 4 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 COOLING AIR OUTLET 2607500-0100 Pos. 005 599749-0100 10-9 (16)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
10-10 (16)
ECM: 204828 - 20050224
085 2607522-0000 1 DOOR
005 599748-0101 1 COOLING AIR INTAKE ........................................ 4-37, 10-13
010 2607499-0000 1 DOOR
Common Parts
020 959656-0000 2 COTTER
030 959657-0000 2 HINGE FLANGE
040 959658-0000 2 SPRING
050 975880-0000 2 HINGE FLANGE
060 975889-0014 1 STRUT
070 975888-0011 1 STRUT
090 90194-0080 1 SIGN, IDENTIFICATION OF WIRING
100 90237-0123 1 LOCK, 1121-U10C
110 90237-0129 1 LOCK CYLINDER, 1109-U6
115 90237-0144 2 GUIDE, 1121-SU540
120 90237-0147 2 LOCKING LUG, NO. 1121-53-0P
125 90237-0324 1 KEY, 1104-02 FOR SQUARE 8 MM
130 90287-0205 4 SCREW
200 312155-0370 4 SCREW DIN 7991 MF6S M6X20 A480
210 312115-0370 4 SCREW ISO4762 M6X20 A4
230 312605-0316 1 HEXAGON NUT, M6M M6 A280
260 315105-0146 2 WASHER BRB5,3X10RFR
270 315105-0153 5 WASHER BRB6,4X12RFR
290 90135-0035 1 EARTH WIRE, L=250 MM 16 MM2
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
2607498-0100 Pos. 005 COOLING AIR INTAKE Drawing file: 599748-1_1_AB.hpgl
10-12 (16)
ECM: 91327 - 20010319
-
030-02 599752-0000 1 COVER
040-02 599753-0000 4 SPACER
050-02 599760-0000 1 SPACER
060-02 599750-0000 1 FILTER
070-02 599751-0000 1 INSERT
080-02 599755-0000 1 GASKET
200-02 312105-0291 4 SCREW M6S ISO 4017 M4X12 A470
210-02 312105-0295 4 SCREW M6S ISO4017 M4X20 A470
220-02 312155-0291 4 SCREW DIN 7991 MF6S M4X12 A480
230-02 312605-0312 4 HEXAGON NUT, M6M M4 A280
240-02 315105-0136 8 WASHER BRB4,3XRFR
Tetra Pak 674851-1800 COOLING AIR INTAKE 2607498-0100 Pos. 005 599748-0101 10-13 (16)
Doc No: SPC-2667130-0102
Tetra Pak
Used in group:
10-14 (16)
ECM: 189697 - 20041115
-
300 90181-0035 MM 250 CABLE DUCT, 25X30MM
310 90422-0049 1 COOLER, SK 3203.100
500 312605-0314 2 HEXAGON NUT, M6M M5 A280
510 315105-0146 2 WASHER BRB5,3X10RFR
Doc No: SPC-2667130-0102
Tetra Pak
SPC
Machine Type Group Description Page No
Tetra Pak 674851-1800 Part Number Index ii-1 (20)

Doc No: SPC-2667130-0102
ii-2 (20)
Tetra Pak Doc No: SPC-2667130-0102
Part No Description Page No Part No Description Page No

7309-0000 ....... HANDLE .............................................................................................................................3-67, 3-69 90051-0030 ..... STELLAR KNOB, INT. THREAD, NO. 8306-0308 .................................................. 1-27, 7-23, 7-25
8490-0010 ....... MOUNTING RAIL ..................................................................................................... 1-49, 3-85, 3-87 90051-0066 ..... HANDLES,KNOB,INTERNAL THREAD M6-25X22.5 ...................................................... 1-65, 1-67
8490-0013 ....... MOUNTING RAIL ........................................................................................................................2-25 90055-0147 ..... HOSE,Y-CONNECTION,PARALLEL,FPT, 12X12MM ................................... 1-13, 3-73, 3-75, 3-81
28509-0000 ..... WASHER .....................................................................................................................................2-31 90062-0015 ..... LOCK WASHER SERRAT.EXT.GEAR,6,4/11 H=0,7 ........................................................ 6-7, 6-11
32079-0000 ..... WASHER .....................................................................................................................................2-31 90062-0016 ..... LOCK WASHER SERRAT.EXT.GEAR,8,4/15 H=0,8 ................. 4-35, 4-39, 6-7, 6-11, 10-7, 10-11
32544-0000 ..... INSULATION NUT ...................................................................................................................... 2-31 90062-0021 ..... LOCK WASHER DIN 6797 TYPE A 5,3 ............................................................................... 3-5, 3-7
32546-0001 ..... ISOLATION NUT .........................................................................................................................2-31 90062-0059 ..... LOCK WASHER SERRAT.EXT.GEAR,4,3/8 H=0,5 ................... 1-19, 1-49, 2-25, 3-85, 3-87, 4-23
32644-0000 ..... WASHER .....................................................................................................................................2-31 90062-0060 ..... LOCK WASHER SERRAT.EXT.GEAR,5,3/10 H=0,6 ............................................. 3-61, 3-63, 4-23
68699-0101 ..... MULTIPLEXER CARD 56LED .................................................................................................... 6-11 90062-0061 ..... LOCK WASHER NORD-LOCK,6,5/10,8, T=2,2 ........................................................................ 4-23
90001-0033 ..... WALL SOCKET OUTLET ................................................................................... 4-7, 4-9, 4-11, 4-13 90064-0111 ..... PUSH BUTTON, WHITE ........................................................................................................... 6-13
90005-0082 ..... WASHER PLAIN ROUND 4,3(M4)/12,H=1 ................................................................ 1-47, 1-53, 2-5 90068-0012 ..... RUBBER ELEMENT REPBY 0090439-0224 ...................................................................... 1-41
90005-0102 ..... WASHER PLAIN ROUND 5/19, H=1 FZB .................................................................................. 4-23 90069-0020 ..... GEARS, HELICAL MOTOR SK01-63L/4 .......................................................................... 3-33, 3-35
90005-0116 ..... WASHER PLAIN ROUND 8,4(M8)/24, H=2 .................................................... 1-27, 4-43, 7-23, 7-25 90069-0084 ..... GEARS, HELICAL MOTOR SK01-71L/4 .......................................................................... 1-57, 1-59
90006-0018 ..... BUSHING ......................................................................................................................................3-9 90069-0237 ..... GEARS, WORM MOTOR FL35G020464034083 ...................................................................... 3-15
90007-0128 ..... CIRCUIT BREAKER, 1P 6 A K ............................................................................ 4-7, 4-9, 4-11, 4-13 90074-0030 ..... CABLE CLIPS, D=32 MM ...........................................................................................................4-43
90007-0129 ..... CIRCUIT BREAKER, 1P 10 A K .......................................................................... 4-7, 4-9, 4-11, 4-13 90075-0124 ..... CONTACTOR, 4KW 24VDC .............................................................................. 4-7, 4-9, 4-11, 4-13
90007-0142 ..... CIRCUIT BREAKER, 2P 32 A K .......................................................................... 4-7, 4-9, 4-11, 4-13 90075-0125 ..... CONTACTOR, 7,5KW 24VDC ........................................................................... 4-7, 4-9, 4-11, 4-13
90007-0156 ..... CIRCUIT BREAKER, 1P 4 A K ............................................................................ 4-7, 4-9, 4-11, 4-13 90075-0141 ..... CONTACTOR, 4KW 24VDC .............................................................................. 4-7, 4-9, 4-11, 4-13
90014-0017 ..... DRIVE ROLLER, NO. 2602-20-6-530 ............................................................. 1-33, 1-35, 1-55, 2-33 90075-0143 ..... CONTACTOR, 4KW 24VDC .............................................................................. 4-7, 4-9, 4-11, 4-13
90015-0019 ..... BUSHING ....................................................................................................................................1-45 90077-0079 ..... FEED THROUGH TERMINAL, 02943.6 ........................................ 1-19, 1-49, 2-25, 3-85, 3-87, 6-9
90015-0020 ..... LEAD-IN, TET5-7, E-1458016 .....................................................................................................1-45 90077-0099 ..... PCB TERMINAL GSE 5/1 1-POLE ............................................................................................ 6-13
90015-0023 ..... LEAD-IN, TET7-10, E-1458019 .....................................................................................................2-9 90077-0113 ..... FEED THROUGH TERMINAL, 10-00102150-1 ............................................................... 4-19, 4-21
90015-0032 ..... LEAD-IN BUSHING ............................................................................................................1-65, 1-67 90077-0325 ..... END PLATE ................................................................................................................................6-13
90017-0030 ..... HANDLE, NO. 144.212.02.500 ......................................................................................................1-7 90077-0328 ..... RAIL TS15/5 .................................................................................................................................6-7
90024-0034 ..... DIODE SURGE SUPPRESSOR, FD B DIL ........................................................ 4-7, 4-9, 4-11, 4-13 90082-0013 ..... OVER VOLT. PROTECT. PU 4C-R 230 VAC ................................................... 4-7, 4-9, 4-11, 4-13
90024-0064 ..... FERRITE, RT187-102-170-A5 ............................................................................. 4-7, 4-9, 4-11, 4-13 90091-0302 ..... RADIAL SEAL 20X32X7 MM DUST LIP .................................................................................... 3-15
90028-0021 ..... CONE TUBE 4 MM ......................................................................................................................1-29 90091-0322 ..... RADIAL SEAL 25X42X7 MM DUST LIP .................................................................................... 3-15
90031-0031 ..... ENHANCED GENIUS COMMUNICATION MODULE ........................................ 4-7, 4-9, 4-11, 4-13 90095-0070 ..... OVERLOAD PROTECTION, PKZM 0,4 A ......................................................... 4-7, 4-9, 4-11, 4-13
90031-0051 ..... BASEPLATE, 10-SLOT ....................................................................................... 4-7, 4-9, 4-11, 4-13 90095-0071 ..... OVERLOAD PROTECTION, PKZM 0-0,63 A .................................................... 4-7, 4-9, 4-11, 4-13
90031-0058 ..... PLC, DIGITAL INPUT MODULE ......................................................................... 4-7, 4-9, 4-11, 4-13 90095-0072 ..... OVERLOAD PROTECTION, PKZM 1,0 A ......................................................... 4-7, 4-9, 4-11, 4-13
90031-0059 ..... PLC, DIGITAL OUTPUT MODULE ..................................................................... 4-7, 4-9, 4-11, 4-13 90095-0073 ..... OVERLOAD PROTECTION, PKZM 1,6 A ......................................................... 4-7, 4-9, 4-11, 4-13
90031-0068 ..... PLC, POWER SUPPLY ....................................................................................... 4-7, 4-9, 4-11, 4-13 90095-0075 ..... OVERLOAD PROTECTION, PKZM 4 A ............................................................ 4-7, 4-9, 4-11, 4-13
90031-0075 ..... CPU363, SERIAL COMMUNICATION ................................................................ 4-7, 4-9, 4-11, 4-13 90097-0023 ..... CABLE SHOE ................................................................................................................3-5, 3-7, 3-9
90031-0076 ..... CPU364, ETHERNET COMMUNICATION ......................................................... 4-7, 4-9, 4-11, 4-13 90097-0026 ..... CABLE SHOE .............................................................................................................................6-11
90032-0012 ..... DISTR. BLOCK & DIST.5/16-24UNF X4 .....................................................................................1-29 90097-0027 ..... CABLE SHOE .............................................................................................................................6-11
90036-0057 ..... LIGHT BULB, BA9S 28V .....................................................................................................5-9, 6-11 90099-0075 ..... NUT HEX. M12X1, BR NI. PL. ................................................................................................... 3-77
90036-0068 ..... BULB 6.5W 24V ............................................................................................................................2-9 90111-0134 ..... MAIN SWITCH P3-63/EA/SVB-SW/N/HI11/H-P3 ...................................... 4-5, 4-7, 4-9, 4-11, 4-13
90038-0045 ..... LIGHT DIODE, 24-60V YELLOW ........................................................................................ 5-9, 6-11 90119-0082 ..... SSR 90119-67 + HEAT SINK ............................................................................. 4-7, 4-9, 4-11, 4-13
90038-0047 ..... DIODE .........................................................................................................................................6-13 90119-0108 ..... RELAY OMRON G2R-2-SNI-24DC .......................................................... 4-7, 4-9, 4-11, 4-13, 4-21
90038-0050 ..... RECTIFIER, 26/63A SKD 82/04 .......................................................................... 4-7, 4-9, 4-11, 4-13 90121-0121 ..... RESISTANCE FIXED, 0,56 KOHM, 2 W ................................................................................... 6-13
90042-0455 ..... COIL FESTO MSFG 24VDC .......................................................................................................3-83 90124-0027 ..... LAMP HOLDER BA9S .............................................................................................................. 6-11
90044-0311 ..... KEY FOR SAFETY SWITCH, AZ15/16 B2 ................................................................ 1-7, 1-65, 1-67 90129-0016 ..... CONNECTOR, SCOTT 52072 S-070 B-00 ............................................................................... 6-13
90129-0018 ..... BASE OMRON P2RF-08-E ........................................................................ 4-7, 4-9, 4-11, 4-13, 4-21 90232-0117 ..... PH.CELL WT4-2P135S10 ..........................................................................................................1-61
90134-0003 ..... BUSHING ....................................................................................................................................1-29 90232-0127 ..... PH.CELL E3S-CT61-L-5-5M ................... 1-15, 1-25, 1-47, 1-53, 1-63, 2-11, 7-37, 7-39, 7-41, 8-11
90134-0010 ..... ADAPTER 5/16-24, R1/8 .............................................................................................................1-29 90233-0030 ..... TUBE FUSE, 30A ........................................................................................ 4-7, 4-9, 4-11, 4-13, 5-9
90134-0031 ..... SLEEVE FOR PLASTIC TUBE ...................................................................................................1-29 90235-0161 ..... VALVE ........................................................................................................................................1-29
90135-0026 ..... EARTH TERMINAL, 3802.6 ............................................................ 1-19, 1-49, 2-25, 3-85, 3-87, 6-9 90235-0250 ..... THROTTLE CHECK VALVE, GR-1/8-B .................................................................................... 3-77
90135-0035 ..... EARTH WIRE, L=250 MM 16 MM2 ........................................................ 4-35, 4-39, 6-7, 10-7, 10-11 90235-0750 ..... THROTTLE CHECK VALVE ......................................................................................................3-83
90136-0002 ..... PLUG 5/16"24 ..............................................................................................................................1-29 90235-0819 ..... FLOW CONTROL VALVE, GRLA 1/4B ..................................................................................... 3-83
90137-0005 ..... BANJO CONN. M6, 5/16-24UNF ................................................................................................ 1-29 90235-0844 ..... THROTTLE CHECK VALVE, M5, MANUAL, 6MM ................................................................... 1-21
90141-0015 ..... RETAINING RING FOR SHAFT DIN 471 8 A2 ................................................................. 1-35, 1-55 90235-0846 ..... THROTTLE CHECK VALVE G1/8", MANUAL, 6 .................................................... 1-15, 1-25, 1-63
90141-0017 ..... RETAINING RING SHAFT DIN 471 17 A2 ................................................................................. 3-19 90235-0847 ..... THROTTLE CHECK VALVE, G1/4", MANUAL,6 ............................................................... 8-7, 8-11
90143-0057 ..... STRIP EMKA 1011-05 21X11MM ...................................................................................... 3-77, 4-43 90235-0848 ..... THROTTLE CHECK VALVE, G1/8", MANUAL,8 ...................................................................... 1-21
90143-0060 ..... EDGE STRIP 9,5X6,3MM BLACK PVC ...................................................................................... 3-11 90237-0079 ..... FAST LOCKING BOLT, FSQ -M8 ..............................................................................................3-77
90143-0061 ..... STRIP .................................................................................................................................2-13, 7-31 90237-0080 ..... LOCK ..........................................................................................................................................6-11
90144-0043 ..... TAPE TYGAFLOR 108AP/03T 16X0,075X30M ....................................................... 2-17, 7-31, 7-33 90237-0123 ..... LOCK, 1121-U10C ........................................................................................ 4-35, 4-39, 10-7, 10-11
90144-0072 ..... TAPE SCOTCH VHBS 4945 W=12,7MM ................................................................................... 4-43 90237-0129 ..... LOCK CYLINDER, 1109-U6 ......................................................................... 4-35, 4-39, 10-7, 10-11
90153-0047 ..... ADHESIVE, MULTI-BOND 330; AKTIVATOR 738 ..................................................................... 3-25 90237-0144 ..... GUIDE, 1121-SU540 .................................................................................... 4-35, 4-39, 10-7, 10-11
90157-0041 ..... SEALING COMPOUND, RHODORSEAL 5651 ............................................................................ 1-7 90237-0147 ..... LOCKING LUG, NO. 1121-53-0P ................................................................. 4-35, 4-39, 10-7, 10-11
90159-0098 ..... CAPACITOR, 22000 æF 100 V ........................................................................... 4-7, 4-9, 4-11, 4-13 90237-0175 ..... TURNING HANDLE, 1125-U185-0A ............................................................ 4-35, 4-39, 10-7, 10-11
90159-0304 ..... HOLDER ..............................................................................................................4-7, 4-9, 4-11, 4-13 90237-0178 ..... FAST LOCKING SOCKET,4-28599, M8 ....................................................................................3-77
90165-0003 ..... PIPE CLIP FOR TUBE D=4 MM ................................................................................................. 1-29 90237-0324 ..... KEY, 1104-02 FOR SQUARE 8 MM ............................................................. 4-35, 4-39, 10-7, 10-11
90166-0109 ..... TUBE 4 MM PA,TRANSP. .......................................................................................................... 1-29 90239-0346 ..... ROD END,CLEVIS W.AXLE M12X1,25 ..................................................................................... 1-29
90178-0007 ..... HOUR COUNTER, BG 40,17-1 12-48VDC ......................................................... 4-7, 4-9, 4-11, 4-13 90239-0405 ..... ROD END,BALL JOINT EYE M10X1,25 ................................................................. 1-15, 1-25, 1-63
90181-0035 ..... CABLE DUCT, 25X30MM .................................................................................................. 8-5, 10-15 90240-0256 ..... FLANGE BUSHING, 6X8X10 MM ................................................................................................ 7-9
90181-0037 ..... CABLE DUCT, 25X40MM ........................................................................................................... 6-11 90245-0023 ..... MATCHING TRANSF. 37KVA ..................................................................................................... 9-3
90181-0038 ..... CABLE DUCT, 40X40MM ........................................................................................................... 4-43 90245-0051 ..... MATCHING TRANSF. 5KVA .............................................................................. 4-7, 4-9, 4-11, 4-13
90181-0053 ..... CABLE DUCT, 40X80MM ........................................................................................................... 4-23 90248-0015 ..... HINGE, RIGHT HT 1 ..................................................................................................................3-77
90181-0054 ..... CABLE DUCT, 60X80MM .................................................................................................. 4-23, 4-43 90256-0001 ..... TAPE SUPPLY HOLDER, TYPE 2000 ...................................................................................... 1-45
90181-0055 ..... CABLE DUCT, 80X80MM ........................................................................................................... 4-23 90259-0308 ..... CONN.TERM.K&M BK 25/3-PKZ0 ..................................................................... 4-7, 4-9, 4-11, 4-13
90181-0088 ..... PLASTIC RIVET, PR 52314 ........................................................................................................4-23 90259-0311 ..... 3 POLE BUSBAR K&M B3.1/5 ........................................................................... 4-7, 4-9, 4-11, 4-13
90181-0199 ..... FLEXIBLE CHAIN, LINK 15 .........................................................................................................2-31 90259-0315 ..... BUS BAR 3-POLE, K&M B 3.1/2-PKZM1 ........................................................... 4-7, 4-9, 4-11, 4-13
90181-0202 ..... FLEXIBLE CHAIN, BRACKET 1015. 1PZ ................................................................................... 2-31 90259-0317 ..... AUXILARY CONTACTS, NHI 11-PKZ0 ............................................................. 4-7, 4-9, 4-11, 4-13
90181-0203 ..... FLEXIBLE CHAIN, BRACKET 1015. 2PZ ................................................................................... 2-31 90261-0025 ..... PLUG, BLIND, PLASTIC GPN300F28 .......................................................................................1-43
90194-0080 ..... SIGN, IDENTIFICATION OF WIRING ............................................................................ 4-35, 10-11 90261-0051 ..... PLUG, BLIND, PLASTIC NO. 21660 ................................................................ 1-27, 7-7, 7-23, 7-25
90194-0152 ..... SIGN, EARTH ..................................................................................... 4-7, 4-9, 4-11, 4-13, 6-7, 6-11 90264-0022 ..... FAN .............................................................................................................................................7-11
90195-0028 ..... TERM.BLOCK 6-POLE STEATIT ..........................................................................................3-5, 3-7 90264-0032 ..... FAN PAPST 220V 18W ............................................................................ 2-23, 4-7, 4-9, 4-11, 4-13
90195-0029 ..... CONN. LINK NO324 FOR -28 ............................................................................................... 3-5, 3-7 90264-0327 ..... CONE / ED 2/250 ..................................................................................................................3-5, 3-7
90220-0034 ..... THERMOCABLE TEX/SITW-20F-KX 2X0,5MM2 ................................................................ 5-5, 5-7 90264-0337 ..... FAN ROTOR R67 F1 250X 71 L-E 5E/14 ............................................................................. 3-5, 3-7
90220-0104 ..... SCR. CABLE 4X1,5MM2 ........................................................................................................5-5, 5-7 90264-0338 ..... FAN ROTOR R67 F1 225X 71 L-E 5E/14 ............................................................................. 3-5, 3-7
90224-0016 ..... CONNECTION ............................................................................................................................2-13 90264-0339 ..... CONE / 2/225 ........................................................................................................................3-5, 3-7
90224-0372 ..... CONN. STRAIGHT ESK-1/4-1/4 151521 ................................................................ 3-73, 3-75, 3-83 90287-0205 ..... SCREW ............................................................................................... 4-35, 4-39, 6-11, 10-7, 10-11
90232-0101 ..... PH.CELL E3S-CT11-D-5M ..........................................................................................................1-63 90319-0004 ..... ROPE ..........................................................................................................................................2-21
90232-0104 ..... PH.CELL E3S-CT61-D-5M ....................... 1-15, 1-25, 1-47, 1-53, 1-63, 2-11, 7-37, 7-39, 7-41, 8-11 90326-0012 ..... PROTECTIVE COVER, T31A4618 .................................................................................. 3-41, 3-43

Doc No: SPC-2667130-0102
ii-4 (20)

90326-0015 ..... THERMOCOUPLE, CR-AL NR. 12826-13 ........................................................................ 3-41, 3-43 90458-0755 ..... GEARS, WORM MOTOR 1600079 .................................................................................. 1-31, 1-45
90326-0020 ..... PLUG, FEMALE YELLOW CR-AL ..................................................................................... 3-41, 3-43 90458-0961 ..... SOLID-STATE RELAY G3R-ODX02SN ............................................................ 4-7, 4-9, 4-11, 4-13
90326-0306 ..... GLAND FITTING 9041-45-KS-KR.1/8" D=4,5MM ............................................................. 3-41, 3-43 90458-0963 ..... SOCKET, TS35 OMRON P2RF-05-E ................................................................ 4-7, 4-9, 4-11, 4-13
90328-0012 ..... SILENCER ..........................................................................................................................1-13, 3-81 90458-1194 ..... MONOSTABLE VALVE 5/2 .............................................................................. 1-13, 3-81, 8-7, 8-11
90328-0033 ..... SILENCER ...................................................................................................................................3-79 90458-1199 ..... VALVE CLOSED IN MID-POSITION, 5/3 ......................................................................... 1-13, 3-81
90335-0027 ..... COMP. SPRING 22170, 1,25X9,25X33 ...................................................................................... 8-11 90458-1204 ..... BASIC SUB-BASE FOR 4 VALVES ................................................................................. 1-13, 3-81
90335-0042 ..... TENSION SPRING 42270, 1,8X20X73 ....................................................................................... 1-41 90458-1206 ..... EXPANSION SUB-BASE FOR 2 VALVES ................................................................ 1-13, 8-7, 8-11
90335-0079 ..... COMP. SPRING 23040, 2,5X22,5X36 ........................................................................................ 1-35 90458-1207 ..... SEALING, STANDARD .................................................................................... 1-13, 3-81, 8-7, 8-11
90335-0083 ..... SPRING .......................................................................................................................................1-35 90458-1208 ..... SEALING, CHANNEL 1 BLOCKED ........................................................................................... 1-13
90344-0071 ..... SPROCKET 10T (115366) ..........................................................................................................1-61 90458-1210 ..... SEALING, ALL CHANNELS BLOCKED .................................................................................... 3-81
90345-0011 ..... FLANGE BEARING, 20X112X37,3 MM .................................................................... 3-31, 3-33, 3-35 90458-1211 ..... LEFT ENDPLATE INCL. 5M CABLE ......................................................................................... 1-13
90345-0020 ..... FLANGE BEARING, 25X124X38, 8 MM ..................................................................................... 1-61 90458-1212 ..... LEFT ENDPLATE INCL. 10M CABLE ....................................................................................... 3-81
90347-0007 ..... VIBRATION DAMPER ...................................................................................................................1-7 90458-1214 ..... RIGHT ENDPLATE EXTERNAL PILOT AIR .................................................................... 1-13, 3-81
90347-0011 ..... VIBRATION DAMPER MEGI 781056 ....................................................................... 1-65, 1-67, 2-21 90458-1215 ..... COVER PLATE FOR EMPTY VALVE POSITION ........................................... 1-13, 3-81, 8-7, 8-11
90347-0059 ..... DAMPER ............................................................................................................................1-65, 1-67 90458-1216 ..... MOUNTING KIT (SPACERS), CDVI5.0-STB ............................................................................ 1-13
90347-0173 ..... GAS SPRING NO. 03-06-120-094404/400N ................................................................................ 1-7 90458-1306 ..... BLIND PLUG CIRCULAR, M12X1,5 514GFK/212 .................................................. 1-49, 3-85, 3-87
90367-0004 ..... RIVET .................................................................................................................................2-17, 7-33 90458-1307 ..... BLIND PLUG CIRCULAR, M16X1,5 514GFK/216 .................................................. 1-49, 3-85, 3-87
90410-0051 ..... TEMPERATURE CONTROLLER, KS 40 ........................................................... 4-7, 4-9, 4-11, 4-13 90458-1508 ..... FLOOR PLATE, DAMPER, M105-20-160 ............................................... 2-5, 3-23, 3-27, 3-61, 3-63
90422-0049 ..... COOLER, SK 3203.100 ..................................................................... 4-7, 4-9, 4-11, 4-13, 8-5, 10-15 90458-1651 ..... EMERGENCY STOP, ZB4-BS-844 ZB4-BZ-104 ....................................................................... 6-11
90457-0092 ..... SAFETY RELAY RT9-24VDC ............................................................................. 4-7, 4-9, 4-11, 4-13 90458-1737 ..... CABLE INCLUDED IN THE MATERIAL ............................................................................... 5-5, 5-7
90458-0292 ..... BASE, KT70-1001 ........................................................................................................................2-9 90458-2027 ..... FLOPPY DISK, 3,5" 1,44MB FOR PC ....................................................................................... 4-31
90458-0293 ..... LIGHT ELEMENT, RED, KL70-401R ............................................................................................2-9 90458-2445 ..... CHECK VALVE G1/8" ................................................................................................................2-11
90458-0294 ..... LIGHT ELEMENT, YELLOW, KL70-401Y .................................................................................... 2-9 90458-2462 ..... MOTOR 3GVA072002-BSB ..................................................................................................3-5, 3-7
90458-0295 ..... LIGHT ELEMENT, BLUE, KL70-401L ...........................................................................................2-9 90458-2596 ..... EXPANSION MODULE EXTRA SUPPLY 2 VALVES ............................................................... 3-81
90458-0297 ..... BASE WITH TUBE 110 MM KA70-1011 .......................................................................................2-9 90458-2730 ..... PRESSURE SENS. SDE-1-D10-G2--R18-C-P1-M8 ........................................................ 3-73, 3-75
90458-0305 ..... CABLE GLAND, M12X1,5, NO.5311 1000 ................................................................. 1-19, 2-5, 4-43 90458-2775 ..... PROXIMITY SWITCH SMT-8-PS-K-LED- ................................................................................. 1-21
90458-0306 ..... CABLE GLAND, M16X1,5, NO.5311 1010 ............ 1-7, 1-31, 1-65, 1-67, 2-5, 2-25, 3-67, 3-69, 4-43 90458-2956 ..... ELBOW PIPE JOINT, EXT.THREAD, D=6MM-G1/8 ................................................................ 2-13
90458-0307 ..... CABLE GLAND, M20X1,5, NO.5311 1020 ............................ 1-9, 2-35, 4-43, 5-11, 7-11, 7-13, 7-15 90459-0397 ..... DOUBLE ACTING, PROFILE, CYL 32-160 ............................................................................... 1-21
90458-0308 ..... CABLE GLAND, M25X1,5, NO.5311 1030 ...................................................... 1-19, 2-25, 4-43, 5-11 90459-0399 ..... BRACKET, REAR, EYE WITH AXLE 32 ................................................................................... 2-11
90458-0309 ..... CABLE GLAND, M32X1,5, NO.5311 1040 ................................................................... 3-5, 3-7, 4-43 90459-0466 ..... CABLE SILICABEL 4X6MM² .................................................................................................5-5, 5-7
90458-0310 ..... CABLE GLAND, M40X1,5, NO.5311 1050 ..................................................................................4-43 90459-0606 ..... MARKING PLATES 5-FW E1-E50 .............................................................................................. 6-9
90458-0313 ..... CABLE GLAND, M12X1,5, NO.5311 1100 ............................................................... 1-49, 3-85, 3-87 90459-0626 ..... DISCETTE BOX FOR TWO 3,5" FLOPPYDISKS ..................................................................... 4-43
90458-0316 ..... CABLE GLAND, M25X1,5, NO.5311 1130 ............................................................... 1-49, 3-85, 3-87 90459-0658 ..... DOUBLE ACTING, PROFILE,CYL 32-25 ................................................................ 1-15, 1-25, 1-63
90458-0321 ..... NUT, M12X1,5 .............................................................................................................................4-43 90459-0698 ..... PLUG, EXT. G-THREAD, G1/8 ........................................................................ 1-13, 3-81, 8-7, 8-11
90458-0322 ..... NUT, M16X1,5 .............................................................................................................................4-43 90459-0699 ..... PLUG, EXT. G-THREAD, G3/8 ..................................................................................................1-13
90458-0323 ..... NUT, M20X1,5 ....................................................................................................................4-43, 7-11 90459-1130 ..... EM. STOP XAL-K178F ..................................................................................... 1-9, 2-35, 7-13, 7-15
90458-0324 ..... NUT, M25X1,5 .............................................................................................................................4-43 90459-1194 ..... KEY SAF.SW. AZ16-03 ZVRK-M16 ........................................................ 1-7, 1-65, 1-67, 3-67, 3-69
90458-0325 ..... NUT, M32X1,5 .............................................................................................................................4-43 90459-1738 ..... MANDATORY ACTION SIGN ISO, READ MAINTENA .................................... 4-7, 4-9, 4-11, 4-13
90458-0436 ..... GLAND, EXTENDED WITH INSERT, M16X1,5 ......................................................................... 3-15 90459-2137 ..... ILLUMINATING SEAL, MEB-LD-12-24DC ....................................................................... 3-73, 3-75
90458-0460 ..... GLAND, LOCKNUT, M16X1,5 .................................................................................................... 3-15 90459-2138 ..... CONNECTOR 3 POLE ..................................................................................................... 3-73, 3-75
90458-0675 ..... PROXIMITY SENSOR, E2EG-X5MB1-5M ........................................................................ 1-35, 1-55 90459-2232 ..... WARNING SIGN ANSI (H), DO NOT WASH .................................................................. 7-29, 10-5
90458-0721 ..... PIPE CLIP FOR TUBE D=8 MMSZ 2367080 ...................................................... 4-7, 4-9, 4-11, 4-13 90459-2240 ..... CYLINDER WITH INT. GUIDING BORE 12 .............................................................................. 1-21
90459-2243 ..... SHUT OFF VALVE, MS4-EE-1/4-V24 ............................................................................... 3-73, 3-75 161175-0000 ... INSULATION .....................................................................................................................3-47, 3-49
90459-2245 ..... DISTRIBUTOR, MS4-FRM-1/4 .......................................................................................... 3-73, 3-75 161219-0000 ... ROLL ........................................................................................................................3-29, 3-37, 3-39
90459-2246 ..... END PLATE, MS4-AGB ..................................................................................................... 3-73, 3-75 161227-0400 ... SUPERSTRUCTURE ....................................................................................................... 3-41, 3-43
90459-2247 ..... BRACKET, MS4-WP ..........................................................................................................3-73, 3-75 161235-0000 ... INDICATION ..................................................................................................................... 1-35, 1-55
90459-2248 ..... BRACKET, MS4-MV .......................................................................................................... 3-73, 3-75 161252-0000 ... SPROCKET ............................................................................................................. 1-31, 1-37, 1-45
90459-2265 ..... PROHIBITION SIGN ISO, DO NOT WASH ...................................................................... 7-29, 10-5 161257-0000 ... SPROCKET ...................................................................................................................... 1-57, 1-59
90459-2271 ..... QUICK COUPLING, (M) 10 320 5263 ................................................................................3-73, 3-75 177542-0000 ... BEARING HOUSING ................................................................................................................. 1-37
90459-2337 ..... SHUT OFF VALVE, MS4-EM-1/4 ...................................................................................... 3-73, 3-75 177543-0000 ... BEARING HOUSING ................................................................................................................. 1-37
90459-2339 ..... FILTER REGULATOR, MS4-LFR-1/4-D7-ERV-AS ........................................................... 3-73, 3-75 208944-0000 ... FOOT ..........................................................................................................................................7-17
90459-2391 ..... PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................................ 1-29, 2-11 255503-0000 ... SPROCKET ..................................................................................................................................7-9
90459-2394 ..... SWIWEL FLANGE 40 .................................................................................................................1-29 256884-0000 ... CONTACT PLATE ............................................................................................................ 2-17, 7-33
90459-2425 ..... PRESSURE REGULATOR IN-LINE, BSP-1/4 ......................................................... 1-13, 3-73, 3-75 259377-0000 ... BEARING HOUSING ........................................................................................................1-35, 1-55
90459-2650 ..... SWIVEL FLANGE 32 ................................................................................................ 1-15, 1-25, 1-63 259383-0000 ... HOLDER ........................................................................................................................... 1-35, 1-55
90459-2777 ..... ONE-WAY FLOW CONTROL VALVE, GR-QS-8 ...................................................................... 1-29 259388-0000 ... STRUT ........................................................................................................................................1-51
90459-2928 ..... LABEL 60417-2-IEC-5020, COMM. REF. POT. ........... 4-7, 4-9, 4-11, 4-13, 4-35, 4-39, 10-7, 10-11 259389-0000 ... MOUNTING BLOCK ................................................................................................ 1-31, 1-45, 1-51
90459-3117 ..... ROD END,BALL JOINT EYE M10X1,25 ..................................................................................... 2-15 259390-0100 ... FEED ROLLER ................................................................................................................. 1-31, 1-45
90459-3148 ..... LINEAR GUIDE UNIT, BORE 32-STROKE 160 ......................................................................... 1-21 259391-0000 ... ROLLER .....................................................................................................................................1-37
90459-3178 ..... SOLID STATE RELAY, 037N0044 ...................................................................... 4-7, 4-9, 4-11, 4-13 265617-0100 ... CYLINDER HOLDER ........................................................................................................1-31, 1-45
90459-3355 ..... SWIVEL FLANGE 32 .................................................................................................................. 2-11 265618-0000 ... SHAFT ........................................................................................................................................1-41
90459-3448 ..... VARIABLE FREQUENCY DRIVE 22A-A1P5N104 ............................................. 4-7, 4-9, 4-11, 4-13 265619-0000 ... SHAFT ........................................................................................................................................1-41
90459-3460 ..... FOOTPRINT FILTER 22-RF010-AL .................................................................... 4-7, 4-9, 4-11, 4-13 265620-0000 ... ARM ............................................................................................................................................1-41
90459-3711 ..... DOUBLE ACTING, PROFILE,CYL 50-25 ..................................................................................... 8-7 265621-0000 ... ARM ............................................................................................................................................1-41
90459-3799 ..... FUSE HOLDER, MSC 10 1-POLE A250148 ....................................................... 4-7, 4-9, 4-11, 4-13 265622-0000 ... SLEEVE ......................................................................................................................................1-41
90459-4126 ..... DOUBLE ACTING, MINI-ISO, CYL. 25-12 ..................................................................................2-13 265623-0000 ... SHAFT ........................................................................................................................................1-41
90459-4245 ..... POWER SUPPLY UNIT, 230VAC/24VDC 3,75A ............................................... 4-7, 4-9, 4-11, 4-13 265624-0000 ... ROLL ..........................................................................................................................................1-41
90459-4791 ..... SOFT START VALVE, MS4-DL-1/4-A8 ............................................................................. 3-73, 3-75 265631-0000 ... SECURING PLATE ...........................................................................................................1-31, 1-45
90459-4793 ..... DOUBLE ACTING, PROFILE,CYL 32-280 ................................................................................. 2-11 265636-0900 ... CRADLE .......................................................................................................................................1-3
90459-5052 ..... MIST LUBRICATOR, MS4-LOE-1/4-R ......................................................................................... 8-3 265646-0000 ... FASTENING PLATE .................................................................................................................. 1-45
90459-5138 ..... RESIDUAL CURRENT DEVICE, F202 AC-25/0,03 ............................................ 4-7, 4-9, 4-11, 4-13 265650-0000 ... KNIFE BLADE ..............................................................................................................................8-7
90459-5254 ..... DOUBLE ACTING, PROFILE,CYL 40-385 ................................................................................. 1-29 265654-0000 ... SIDE PLATE .................................................................................................................................8-7
90459-5395 ..... DOUBLE ACTING, PROFILE,CYL 40-50 ................................................................................... 8-11 265655-0000 ... RUBBER .......................................................................................................................................8-7
90459-5410 ..... VALVE BODY 3/2 MONOSTABLE NC ....................................................................................... 3-83 265656-0000 ... RIM ...............................................................................................................................................8-7
161098-0000 ... BOTTOM PANEL ................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 265657-0000 ... LUG ..............................................................................................................................................8-7
161099-0000 ... BOTTOM SECTION ............................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 265668-0000 ... AXLE PIN ......................................................................................................................................8-7
161115-0000 ... FRAME ...............................................................................................................................3-47, 3-49 265669-0000 ... WASHER ......................................................................................................................................8-7
161140-0000 ... SHAFT .........................................................................................................................................3-37 265670-0000 ... STOP ............................................................................................................................................8-7
161141-0000 ... SPACER RING ............................................................................................................................3-29 265672-0200 ... DRIVE UNIT .................................................................................................................................1-3
161148-0000 ... SPROCKET ........................................................................................................................3-33, 3-35 265674-0000 ... PROTECTION .................................................................................................................. 1-57, 1-59
161166-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 265675-0000 ... MOTOR SHELF ................................................................................................................ 1-57, 1-59
161172-0000 ... INSULATION .......................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 265676-0000 ... SECURING PLATE ...........................................................................................................1-57, 1-59
161173-0000 ... INSULATION .......................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 265677-0000 ... SECURING PLATE ...........................................................................................................1-57, 1-59
161174-0000 ... INSULATION ......................................................................................................................3-47, 3-49 266252-0000 ... ROLL ..........................................................................................................................................2-15

Doc No: SPC-2667130-0102
ii-6 (20)

266255-0100 ... CONDUCTING ROLLER .............................................................................................................. 3-3 278663-0300 ... LIFTER .........................................................................................................................................2-3
266256-0000 ... ROLL ............................................................................................................................................3-31 278665-0000 ... SHEET ........................................................................................................................................2-21
266257-0600 ... DRIVE UNIT ..................................................................................................................................3-3 278666-0000 ... PLATE ........................................................................................................................................2-21
266258-0000 ... DRIVE ROLLER .................................................................................................................3-33, 3-35 278667-0000 ... ROLL ..........................................................................................................................................2-21
266261-0000 ... SPROCKET ........................................................................................................................3-33, 3-35 278668-0000 ... BOW CLAMP .............................................................................................................................2-21
266265-0100 ... GUIDE ROLLER ............................................................................................................................3-3 278669-0000 ... HOLDER .....................................................................................................................................2-21
266273-0500 ... LOWER SECT.WELD.ASSEMBLY ................................................................................... 3-41, 3-43 278670-0000 ... ROLL ..........................................................................................................................................2-21
266274-0000 ... FRAME ................................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 278671-0000 ... PIPE ............................................................................................................................................2-21
266275-0000 ... FRAME ................................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 278672-0000 ... KNOB ..........................................................................................................................................2-21
266279-0000 ... BOTTOM SECTION ............................................................................... 3-51, 3-53, 3-55, 3-57, 3-59 279907-0000 ... SPROCKET ...................................................................................................................... 1-31, 1-45
266280-0000 ... SHEET ....................................................................................................3-51, 3-53, 3-55, 3-57, 3-59 279908-0000 ... SPROCKET ...................................................................................................................... 1-57, 1-59
266281-0000 ... SHEET ....................................................................................................3-51, 3-53, 3-55, 3-57, 3-59 279909-0000 ... SPROCKET ...................................................................................................................... 3-33, 3-35
266286-0800 ... HEATER ASSEMBLY ....................................................................................................................3-3 279941-0000 ... BEAM ..........................................................................................................................................1-45
266288-0000 ... SLIDE RAIL ........................................................................................................................3-41, 3-43 283067-0000 ... CONTACT LINK ................................................................................................................2-17, 7-33
266290-0000 ... MOUNTING BAR ............................................................................................................... 3-41, 3-43 283966-0000 ... BEARING HOUSING ........................................................................................................1-35, 1-55
266291-0000 ... MOUNTING BAR ............................................................................................................... 3-41, 3-43 283970-0000 ... KNIFE HOLDER .........................................................................................................................2-13
266292-0000 ... CURTAIN ........................................................................................................................... 3-41, 3-43 283971-0000 ... KNIFE HOLDER .........................................................................................................................2-13
266294-0000 ... FASTENING BRACKET .................................................................................................... 3-41, 3-43 284503-0000 ... WASHER ....................................................................................................................................2-13
266300-0000 ... CABLE TRENCH ............................................................................................................... 3-61, 3-63 284504-0000 ... GUIDE SHAFT ...........................................................................................................................2-13
266327-0000 ... STEERING RAIL ................................................................................................................3-67, 3-69 284505-0000 ... GUIDE SHAFT ...........................................................................................................................2-13
266328-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 284509-0000 ... SHAFT ........................................................................................................................................2-15
266330-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 284518-0200 ... TPC BAR ....................................................................................................................................7-31
266331-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 284518-0201 ... TPC-BAR ....................................................................................................................................2-15
266333-0000 ... COVERING PLATE ............................................................................................................3-67, 3-69 292341-0000 ... HEAD RAIL ...................................................................................................................................8-7
266334-0000 ... AXLE PIN ............................................................................................................................3-67, 3-69 297254-0000 ... SHEET ........................................................................................................................................3-65
266335-0000 ... ROLL ..................................................................................................................................3-67, 3-69 297273-0300 ... ROLLER CONVEYOR ................................................................................................................. 7-3
266336-0000 ... SPACER .............................................................................................................................3-67, 3-69 297275-0000 ... SUPPORT LEG ..........................................................................................................................7-17
268964-0000 ... SPACER .......................................................................................................... 1-19, 1-49, 3-85, 3-87 297276-0000 ... ROD ............................................................................................................................................7-17
269493-0000 ... RAIL ....................................................................................................................................2-17, 7-33 311103-1456 ... PARALLEL PIN ISO 2338 10M6X24 A1 .................................................................................... 1-35
269692-0000 ... INSULATION ..........................................................................................................................3-5, 3-7 311520-0329 ... RIVET, BLANK 2,4X8 ...................................................................................................................7-3
269697-0400 ... TUBE HEATER ELEMENT ....................................................................................................3-5, 3-7 311520-0429 ... RIVET, BLANK 3,2X8 ............................................................................................................3-5, 3-7
269698-0000 ... WIRE ELEMENT ...........................................................................................................................3-9 311520-0435 ... RIVET, BLANK 3,2X10 ....................................................... 3-41, 3-43, 3-51, 3-53, 3-55, 3-57, 3-59
269699-0000 ... INSULATING HOLDER .................................................................................................................3-9 311520-0440 ... RIVET, BLANK 3,2X12 .................................................................................................................2-5
269855-0000 ... KNIFE ..........................................................................................................................................2-13 311521-0154 ... BLANK RIVET 4X10 ........................................................................................... 4-7, 4-9, 4-11, 4-13
276101-0000 ... CABLE TRENCH ............................................................................................................... 3-61, 3-63 312101-0325 ... SCREW M6S M5X10 FZB ................................................................................................ 3-33, 3-35
276107-0000 ... CABLE TRENCH ............................................................................................................... 3-61, 3-63 312101-0327 ... SCREW M6S M5X12 FZB ......................................................................................................... 2-21
278649-0000 ... SUPPORT ...................................................................................................................................7-17 312101-0329 ... SCREW M6S M5X16 FZB ......................................................................................................... 2-21
278657-0000 ... PLATE .........................................................................................................................................8-11 312101-0342 ... SCREW M6S M5X55 FZB ......................................................................................................... 8-11
278658-0000 ... SHEET .........................................................................................................................................8-11 312101-0366 ... SCREW M6S M6X12 FZB ......................................................................................................... 2-21
278659-0000 ... GUIDE .........................................................................................................................................8-11 312101-0449 ... SCREW M6S M8X16 FZB ................................................................................................ 3-47, 3-49
278660-0000 ... SLIDE RAIL .................................................................................................................................8-11 312101-0453 ... SCREW M6S M8X25 FZB ....................................................................................... 3-33, 3-35, 3-37
278661-0000 ... MOUNTING BAR ........................................................................................................................ 8-11 312101-0465 ... SCREW M6S M8X70 FZB ................................................................................................ 3-61, 3-63
312101-0469 ... SCREW M6S M8X90 FZB ................................................................................................. 3-61, 3-63 312105-0453 ... SCREW M6S ISO 4017 M8X25 A480 1-5, 1-15, 1-25, 1-31, 1-45, 1-51, 1-63, 2-5, 2-11, 3-11, 3-17
312101-0473 ... SCREW M6S M8X110 FZB ............................................................................................... 3-61, 3-63 ..................................................................... 3-23, 3-27, 3-29, 3-39, 3-51, 3-53, 3-55, 3-57, 3-59, 7-27
312101-0493 ... SCREW M6S M10X25 FZB ...................................................................................... 3-31, 3-33, 3-35 312105-0455 ... SCREW M6S ISO 4017 M8X30 A480 ......................................................... 1-5, 1-7, 1-31, 1-45, 7-7
312104-0378 ... SCREW M6S M6X40H FZB ........................................................................................................1-41 312105-0457 ... SCREW M6S ISO 4014 M8X35 A480 ............................................. 1-7, 1-33, 1-41, 1-57, 1-59, 7-7
312105-0289 ... SCREW M6S ISO 4017 M4X10 A470 ........................................................................ 1-39, 8-7, 8-11 312105-0459 ... SCREW M6S ISO 4014 M8X40 A480 ..................................................................... 1-21, 3-67, 3-69
312105-0291 ... SCREW M6S ISO 4017 M4X12 A470 1-7, 2-7, 2-15, 2-23, 2-27, 4-7, 4-9, 4-11, 4-13, 4-37, 4-41 312105-0460 ... SCREW M6S ISO 4014 M8X45 A480 ............................................................ 1-15, 1-25, 1-51, 1-63
..............................................................................................................................................10-9, 10-13 312105-0462 ... SCREW M6S ISO 4014 M8X55 A480 ....................................................................................... 3-25
312105-0293 ... SCREW M6S ISO 4017 M4X16 A470 .........................................................................................1-15 312105-0475 ... SCREW M6S ISO 4014 M8X120 A480 ....................................................................................... 7-7
312105-0295 ... SCREW M6S ISO4017 M4X20 A470 .............................................................................. 4-37, 10-13 312105-0477 ... SCREW M6S ISO 4014 M8X130 A480 ..................................................................................... 3-15
312105-0297 ... SCREW M6S ISO 4017 M4X25 A470 ............................................................. 1-29, 1-63, 2-11, 2-31 312105-0491 ... SCREW M6S ISO 4017 M10X20 A480 ....................................................................................... 2-5
312105-0299 ... SCREW M6S ISO 4017 M4X30 A470 ............................................................................... 1-15, 1-25 312105-0493 ... SCREW M6S ISO 4017 M10X25 A480 ............................................................................ 3-23, 3-27
312105-0301 ... SCREW M6S ISO 4017 M4X35 A470 .........................................................................................1-63 312105-0495 ... SCREW M6S ISO 4017 M10X30 A480 ..................................................................................... 1-61
312105-0323 ... SCREW M6S ISO 4017 M5X8 A480 ................................................................................... 1-7, 2-27 312105-0505 ... SCREW M6S ISO 4014 M10X70 A480 ................................................................... 1-15, 1-25, 1-63
312105-0325 ... SCREW M6S ISO 4017 M5X10 A480 .......................................... 1-11, 1-61, 2-13, 3-11, 3-67, 3-69 312105-0509 ... SCREW M6S ISO 4014 M10X90 A480 ..................................................................................... 3-11
312105-0327 ... SCREW M6S ISO 4017 M5X12 A480 1-21, 1-65, 1-67, 2-35, 3-11, 3-21, 3-41, 3-43, 7-13, 7-15, 8-7 312109-0335 ... SCREW M6S ISO 4017 M5X30 A480 ....................................................................................... 2-27
312105-0328 ... SCREW M6S ISO 4017 M5X14 A480 ...........................................................................................1-7 312111-0341 ... SCREW HEX.SOCK.HD.MC6S-TT 5X50 88 FZB ..................................................................... 2-13
312105-0329 ... SCREW M6S ISO 4017 M5X16 A480 ..................................... 1-65, 1-67, 2-11, 3-5, 3-7, 3-71, 7-41 312111-0370 ... SCREW HEX.SOCK.HD.MC6S-TT 6X20 88 FZB ..................................................................... 1-37
312105-0331 ... SCREW M6S ISO 4017 M5X20 A480 .................................................... 1-45, 1-65, 1-67, 2-27, 8-11 312115-0224 ... SCREW ISO4762 M3X10 A4 .....................................................................................................1-61
312105-0332 ... SCREW M6S ISO 4017 M5X22 A480 ............................................................................... 1-65, 1-67 312115-0297 ... SCREW ISO4762 M4X25 A4 .....................................................................................................1-21
312105-0333 ... SCREW M6S ISO 4017 M5X25 A480 ...................................................................... 1-29, 1-65, 1-67 312115-0325 ... SCREW ISO4762 M5X10 A4 ............................................................................................2-13, 2-29
312105-0335 ... SCREW M6S ISO 4014 M5X30 A480 ............................................................................... 1-65, 1-67 312115-0327 ... SCREW ISO4762 M5X12 A4 .................................................................................... 1-35, 1-55, 2-9
312105-0337 ... SCREW M6S ISO 4014 M5X35 A480 ............................................................................... 1-35, 1-55 312115-0329 ... SCREW ISO4762 M5X16 A4 .................................................................................. 1-29, 1-35, 1-55
312105-0339 ... SCREW M6S ISO 4014 M5X40 A480 .........................................................................................2-27 312115-0331 ... SCREW ISO4762 M5X20 A4 ...................................................................................... 1-7, 2-11, 8-7
312105-0364 ... SCREW M6S ISO 4017 M6X10 A480 ..................... 1-61, 1-65, 1-67, 2-5, 2-7, 3-61, 3-63, 7-9, 7-39 312115-0337 ... SCREW ISO4762 M5X35 A4 ............................................................................................1-47, 1-53
312105-0366 ... SCREW M6S ISO 4017 M6X12 A480 1-5, 1-7, 1-21, 1-29, 1-31, 1-45, 1-57, 1-59, 1-65, 1-67, 2-23 312115-0339 ... SCREW ISO4762 M5X40 A4 .....................................................................................................1-47
........................................................ 2-27, 2-33, 3-5, 3-7, 3-15, 3-41, 3-43, 3-71, 3-83, 7-11, 7-21, 7-37 312115-0341 ... SCREW ISO4762 M5X50 A4 .....................................................................................................1-29
312105-0367 ... SCREW M6S ISO 4017 M6X14 A480 .........................................................................................3-79 312115-0343 ... SCREW ISO4762 M5X60 A4 .......................................................................................................8-7
312105-0368 ... SCREW M6S ISO 4017 M6X16 A480 1-9, 1-15, 1-17, 1-19, 1-25, 1-29, 1-63, 1-65, 1-67, 2-13, 3-11 312115-0366 ... SCREW ISO4762 M6X12 A4 ............................................................................................1-45, 8-11
................................................................... 3-45, 3-61, 3-63, 3-65, 3-67, 3-69, 7-7, 7-9, 7-17, 8-7, 8-11 312115-0367 ... SCREW ISO4762 M6X14 A4 .....................................................................................................1-21
312105-0370 ... SCREW M6S ISO 4017 M6X20 A480 ............ 1-21, 1-63, 2-5, 3-23, 3-27, 3-67, 3-69, 7-7, 7-9, 7-27 312115-0368 ... SCREW ISO4762 M6X16 A4 .................................................................................. 2-13, 3-77, 8-11
312105-0372 ... SCREW M6S ISO 4017 M6X25 A480 1-15, 1-21, 1-25, 1-29, 1-39, 1-41, 1-61, 1-63, 1-65, 1-67, 2-7 312115-0370 ... SCREW ISO4762 M6X20 A4 ......... 1-27, 1-35, 1-55, 4-35, 4-39, 6-11, 7-23, 7-25, 8-7, 10-7, 10-11
...........................................................................................................................................3-15, 7-9, 8-7 312115-0374 ... SCREW ISO4762 M6X30 A4 ..............................................................................................2-31, 8-7
312105-0374 ... SCREW M6S ISO 4014 M6X30 A480 ............................................................. 2-15, 3-21, 3-61, 3-63 312115-0379 ... SCREW ISO4762 M6X45 A4 .....................................................................................................2-13
312105-0376 ... SCREW M6S ISO 4014 M6X35 A480 .......................................... 1-45, 3-41, 3-43, 3-67, 3-69, 3-83 312115-0451 ... SCREW ISO4762 M8X20 A4 ..............................................................................................2-7, 3-77
312105-0378 ... SCREW M6S ISO 4014 M6X40 A480 ............................................................................... 1-31, 1-45 312115-0453 ... SCREW ISO4762 M8X25 A4 .....................................................................................................1-35
312105-0379 ... SCREW M6S ISO 4014 M6X45 A480 .........................................................................................1-51 312115-0455 ... SCREW ISO4762 M8X30 A4 .....................................................................................................1-41
312105-0380 ... SCREW M6S ISO 4014 M6X50 A480 ............................................................................... 1-21, 2-27 312115-0457 ... SCREW ISO4762 M8X35 A4 .................................................................................... 3-17, 3-77, 8-7
312105-0382 ... SCREW M6S ISO 4014 M6X60 A480 ...........................................................................................8-7 312115-0460 ... SCREW ISO4762 M8X45 A4 .......................................................................................................2-7
312105-0447 ... SCREW M6S ISO 4017 M8X12 A480 .......................................................................... 1-5, 2-5, 7-11 312115-0463 ... SCREW ISO4762 M8X60 A4 .....................................................................................................1-35
312105-0449 ... SCREW M6S ISO 4017 M8X16 A480 1-7, 1-23, 1-61, 2-11, 2-13, 2-19, 3-29, 3-39, 3-61, 3-63, 3-67 312121-0285 ... SCREW ISO 1207 M4X6 4.8 - 5.8 Z.PL. ..................................................................................... 6-7
...............................................................................................................3-69, 7-7, 7-11, 7-17, 7-21, 8-7 312121-0287 ... SCREW ISO 1207 M4X8 4.8 - 5.8 Z.PL. ................................................................................... 4-23
312105-0451 ... SCREW M6S ISO 4017 M8X20 A480 ................................................................. 1-5, 1-7, 1-29, 2-15 312121-0291 ... SCREW ISO 1207 M4X12 4.8 - 5.8 Z.PL. ................................................................................. 4-23

Doc No: SPC-2667130-0102
ii-8 (20)

312121-0327 ... SCREW ISO 1207 M5X12 4.8 - 5.8 Z.PL. ...................................................................................4-23 312502-0169 ... DRIVE SCREW ROUND HEAD KDS 2X5 ................................................................................ 2-29
312121-0349 ... SCREW ISO 1207 M5X90 4.8 - 5.8 Z.PL. ............................................................................. 3-5, 3-7 312503-0275 ... TAPPING SCREW ISO 7049-ST3,5X6,5-C-Z ........................................................................... 7-11
312121-0366 ... SCREW ISO 1207 M6X12 4.8 - 5.8 Z.PL. ...................................................................................4-23 312503-0408 ... TAPPING SCREW ISO 7049-ST4,8X9,5-C-Z .................................................................. 3-41, 3-43
312125-0285 ... SCREW ISO 1207 M4X6 A4 .......................................................................................1-29, 2-5, 2-25 312601-0310 ... HEXAGON NUT, DIN 934 M3 8 FZB ......................................................................................... 6-11
312125-0287 ... SCREW ISO 1207 M4X8 A4 ........................................................................... 1-19, 1-49, 3-85, 3-87 312601-0314 ... HEXAGON NUT, DIN 934 M5 8 FZB ......................................................................................... 2-21
312125-0289 ... SCREW ISO 1207 M4X10 A4 ......................................................... 1-9, 2-13, 2-29, 2-35, 7-13, 7-15 312601-0316 ... HEXAGON NUT, DIN 934 M6 8 FZB ........................................................................ 4-43, 6-7, 6-11
312125-0291 ... SCREW ISO 1207 M4X12 A4 ...................................................................................1-49, 3-85, 3-87 312601-0318 ... HEXAGON NUT, DIN 934 M8 8 FZB ................................................................................3-33, 3-35
312125-0293 ... SCREW ISO 1207 M4X16 A4 ...................................................................................1-19, 7-39, 7-41 312602-0318 ... HEXAGON NUT, EN 24032 M6M M8 NIPLBR .................................................................... 3-5, 3-7
312125-0295 ... SCREW ISO 1207 M4X20 A4 ................................................................ 1-49, 2-25, 3-85, 3-87, 7-37 312605-0312 ... HEXAGON NUT, M6M M4 A280 ........................ 2-25, 4-7, 4-9, 4-11, 4-13, 4-23, 4-37, 4-43, 10-13
312125-0297 ... SCREW ISO 1207 M4X25 A4 ............................................................................................1-47, 1-53 312605-0314 ... HEXAGON NUT, M6M M5 A280 ......... 1-7, 1-35, 1-55, 3-5, 3-7, 3-71, 3-77, 4-23, 7-41, 8-5, 10-15
312125-0323 ... SCREW ISO 1207 M5X8 A4 ..............................................................................................3-41, 3-43 312605-0316 ... HEXAGON NUT, M6M M6 A280 1-9, 1-31, 1-35, 1-41, 1-45, 1-51, 1-55, 1-61, 2-15, 3-41, 3-43
312125-0327 ... SCREW ISO 1207 M5X12 A4 ............................................................................................3-61, 3-63 .................................................. 3-61, 3-63, 3-79, 4-23, 4-35, 4-39, 7-17, 7-27, 7-39, 8-7, 10-7, 10-11
312125-0366 ... SCREW ISO 1207 M6X12 A4 ................................................................................................3-5, 3-7 312605-0318 ... HEXAGON NUT, M6M M8 A280 ............................................ 1-5, 1-7, 1-27, 3-67, 3-69, 7-23, 7-25
312145-0327 ... SCREW ISO 2009 MFS M5X12 A4 ............................................................................................ 2-21 312605-0320 ... HEXAGON NUT, M6M M10 A280 ............................................................................. 1-61, 7-21, 8-7
312151-0287 ... SCREW EN 10642 MF6S M4X8 10.9 EL.PL ................................................................................ 7-9 312605-0328 ... HEXAGON NUT, M6M M24 A280 ..............................................................................................7-17
312155-0291 ... SCREW DIN 7991 MF6S M4X12 A480 .................... 1-15, 1-21, 1-25, 1-63, 4-37, 4-41, 10-9, 10-13 312625-0316 ... HEXAGON THIN NUT, EN 24035 ML6M M6 A4 ......................................................................... 1-7
312155-0323 ... SCREW DIN 7991 MF6S M5X8 A480 .......................................................................................... 2-5 312625-0318 ... HEXAGON THIN NUT, EN 24035 ML6M M8 A4 .............................................................. 3-67, 3-69
312155-0325 ... SCREW DIN 7991 MF6S M5X10 A480 ........................................................................................ 1-7 312630-0316 ... HEX.NUT FINE, EN 24032 M6M M6X0,75 FZB8 ............................................................. 1-65, 1-67
312155-0327 ... SCREW DIN 7991 MF6S M5X12 A480 .................................................................... 1-65, 1-67, 2-21 312705-0314 ... NUT HEX. DOMED CAP MHM-6 M5 A280 ............................................................................... 6-11
312155-0329 ... SCREW DIN 7991 MF6S M5X16 A480 .................................................................... 1-65, 1-67, 8-11 312705-0316 ... NUT HEX. DOMED CAP MHM-6 M6 A280 ...................................................................... 1-35, 1-55
312155-0331 ... SCREW DIN 7991 MF6S M5X20 A480 ...................................................................................... 2-31 312811-0316 ... NUT HEX.LOCK HELI COIL MID GRIP M6 SS ............................................................... 3-41, 3-43
312155-0368 ... SCREW DIN 7991 MF6S M6X16 A480 ............................................................... 1-29, 1-61, 2-5, 8-7 312812-0312 ... HEXAGON NUT, NY-LOCK M4 A480 ....................................................................... 1-7, 2-23, 2-31
312155-0370 ... SCREW DIN 7991 MF6S M6X20 A480 ...................................... 3-21, 4-35, 4-39, 7-39, 10-7, 10-11 312812-0314 ... HEXAGON NUT, NY-LOCK M5 A480 ............ 1-29, 1-65, 1-67, 2-27, 2-31, 4-35, 4-39, 10-7, 10-11
312155-0376 ... SCREW DIN 7991 MF6S M6X35 A480 ................................................. 1-29, 2-27, 3-11, 3-67, 3-69 312812-0316 ... HEXAGON NUT, NY-LOCK M6 A480 ............................................................ 1-29, 2-27, 3-11, 7-11
312155-0449 ... SCREW DIN 7991 MF6S M8X16 A480 ...................................................................................... 1-23 312812-0318 ... HEXAGON NUT, NY-LOCK M8 A480 ...................................................... 1-15, 1-25, 1-63, 3-5, 3-7
312155-0451 ... SCREW DIN 7991 MF6S M8X20 A480 ............................................................................... 1-7, 1-29 312812-0320 ... HEXAGON NUT, NY-LOCK M10 A480 .......................................................... 1-15, 1-25, 1-63, 2-15
312155-0453 ... SCREW DIN 7991 MF6S M8X25 A480 ........................................................... 1-15, 1-25, 1-63, 3-17 312812-0322 ... HEXAGON NUT, NY-LOCK M12 A480 ..................................................................................... 3-25
312155-0457 ... SCREW DIN 7991 MF6S M8X35 A480 .................................................................... 1-15, 1-25, 1-63 315101-0124 ... WASHER PLAIN, BRB, 3,2/6 H=0,5 ..........................................................................................6-11
312155-0461 ... SCREW DIN 7991 MF6S M8X50 A480 ........................................................................................ 2-7 315101-0136 ... WASHER BRB, 4,3/8 H=0,8 ........................................................................................................ 6-7
312155-0493 ... SCREW DIN 7991 MF6S M10X25 A480 ........................................................................... 3-23, 3-27 315101-0146 ... WASHER PLAIN, BRB, 5,3/10 H=1 ........................................................................ 2-21, 3-33, 3-35
312156-0370 ... SCREW EN 10642 MF6S M6X20 A480 ............................................................................ 3-41, 3-43 315101-0153 ... WASHER PLAIN, BRB, 6,4/12 H=1,5 .............................................................. 2-21, 4-43, 6-7, 6-11
312180-0368 ... SCREW ISO7379 H6X16 ............................................................................................................2-21 315101-0165 ... WASHER PLAIN, BRB, 8,4/16 H=1,5 ............................................................ 3-33, 3-35, 3-47, 3-49
312180-0378 ... SCREW ISO7379 H6X40 ............................................................................................................2-21 315101-0173 ... WASHER PLAIN, BRB, 10,5/22 H=2 ...................................................................... 3-31, 3-33, 3-35
312316-0320 ... SCREW HEX.SOCK.SET CUP P.MSK6SS5X5 FZB ................................................................. 1-37 315103-0165 ... WASHER PLAIN, BRB, 8,4/16,H=1,5 NIPL BR ........................................................................ 2-31
312316-0362 ... SCREW HEX.SOCK.SET CUP P.MSK6SS6X8 FZB ........................................................ 3-33, 3-35 315105-0124 ... WASHER BRB3,2X6RFR .......................................................................................................... 1-61
312318-0321 ... SCREW ISO4029 M5X6 A4 ...............................................................................................1-31, 1-45 315105-0136 ... WASHER BRB4,3XRFR 1-7, 1-15, 1-19, 1-25, 1-29, 1-39, 1-49, 1-63, 2-7, 2-11, 2-13, 2-23, 2-25
312318-0360 ... SCREW ISO4029 M6X6 A4 ........................................................................................1-35, 1-55, 7-9 2-27, 2-29, 3-85, 3-87, 4-7, 4-9, 4-11, 4-13, 4-23, 4-37, 4-41, 7-9, 7-37, 7-39, 7-41, 8-7, 8-11, 10-9, 10-13
312318-0362 ... SCREW ISO4029 M6X8 A4 ................................................................................ 1-57, 1-59, 3-5, 3-7 315105-0146 ... WASHER BRB5,3X10RFR 1-7, 1-11, 1-21, 1-29, 1-35, 1-45, 1-55, 1-61, 1-65, 1-67, 2-9, 2-11, 2-27
312318-0364 ... SCREW ISO4029 M6X10 A4 ...............................................................................................2-19, 7-9 2-31, 2-35, 3-5, 3-7, 3-11, 3-41, 3-43, 3-67, 3-69, 3-71, 4-35, 4-39, 7-13, 7-15, 7-41, 8-5, 8-7, 8-11
312318-0366 ... SCREW ISO4029 M6X12 A4 ......................................................................................1-61, 3-29, 8-7 .................................................................................................................................10-7, 10-11, 10-15
312318-0445 ... SCREW ISO4029 M8X10 A4 .............................................................................................1-43, 3-15 315105-0153 ... WASHER BRB6,4X12RFR 1-5, 1-7, 1-9, 1-15, 1-17, 1-19, 1-21, 1-25, 1-27, 1-29, 1-31, 1-35, 1-45
312318-0447 ... SCREW ISO4029 M8X12 A4 .............................................................................................1-41, 3-25 1-55, 1-57, 1-59, 1-61, 1-63, 1-65, 1-67, 2-5, 2-7, 2-13, 2-15, 2-23, 2-27, 2-33, 3-5, 3-7, 3-15, 3-21
3-23, 3-27, 3-41, 3-43, 3-61, 3-63, 3-65, 3-67, 3-69, 3-77, 3-79, 4-23, 4-35, 4-39, 6-11, 7-7, 7-9, 7-11 315755-0105 ... RETAINING RING SHAFT DIN 6799 3,2 A2 ............................................... 4-35, 4-39, 10-7, 10-11
............................................................. 7-17, 7-21, 7-23, 7-25, 7-27, 7-37, 7-39, 8-7, 8-11, 10-7, 10-11 315755-0106 ... RETAINING RING SHAFT DIN 6799 4 A2 ............................................................. 1-15, 1-25, 1-63
315105-0156 ... WASHER BRB 6.7X14 RFR ....................................................................................................... 3-71 315755-0110 ... RETAINING RING SHAFT DIN 6799 9 A2 ............................................................... 2-13, 2-19, 8-7
315105-0165 ... WASHER BRB8,4X16RFR 1-5, 1-7, 1-15, 1-21, 1-23, 1-25, 1-29, 1-31, 1-33, 1-35, 1-41, 1-45, 1-51 315760-0128 ... SNAP RING BR28 ......................................................................................................................1-29
1-57, 1-59, 1-61, 1-63, 2-5, 2-11, 2-13, 2-15, 2-19, 3-5, 3-7, 3-11, 3-15, 3-17, 3-23, 3-25, 3-27, 3-29 318201-0033 ... ROLLER CHAIN, SINGLE 3/8 -33 .................................................................................... 1-31, 1-45
................. 3-39, 3-51, 3-53, 3-55, 3-57, 3-59, 3-61, 3-63, 3-67, 3-69, 3-77, 7-7, 7-11, 7-17, 7-21, 7-27 318201-0048 ... ROLLER CHAIN, SINGLE 3/8 -48 ............................................................................................... 7-9
315105-0171 ... WASHER BRB10X18 .........................................................................................................3-41, 3-43 318202-0049 ... ROLLER CHAIN, SINGLE 1/2 -49 .................................................................................... 3-33, 3-35
315105-0173 ... WASHER BRB10,5X22RFR ...................... 1-15, 1-25, 1-61, 1-63, 2-5, 2-15, 3-11, 3-23, 3-27, 7-21 318202-0055 ... ROLLER CHAIN, SINGLE 1/2 -55 .................................................................................... 3-33, 3-35
315105-0178 ... WASHER BRB13X24RFR ................................................................................................... 3-25, 7-9 318209-0181 ... CONNECTING LINK SINGLE 3/8" .............................................................................................. 7-9
315106-0136 ... WASHER ISO 7089-4-200 HV A4 .............................................................................................. 4-43 318232-0035 ... ROLLER CHAIN DUPLEX 1/2"-35 ....................................................................................1-57, 1-59
315106-0146 ... WASHER ISO 7089-5-200 HV A4 .............................................................................................. 4-23 321105-0163 ... BEAR. BUSH. WITHOUT FL, 10X16X10 MM ........................................................................... 2-13
315106-0153 ... WASHER ISO 7089-6-200 HV A4 .............................................................................................. 3-83 321105-0234 ... BEAR. BUSH. WITHOUT FL, 20X28X30 MM ........................................................................... 1-29
315111-0178 ... WASHER PLAIN, TBRB 13/24 H=4 ........................................................................................... 8-11 321111-0274 ... FLANGE BUSHING, 18X24X18 MM .......................................................................................... 1-41
315121-0153 ... WASHER PLAIN, TBRSB 6,4/22 H=4 ................................. 1-29, 1-31, 1-45, 1-51, 3-45, 3-61, 3-63 321111-0306 ... FLANGE BUSHING, 20X26X25 MM ....................................................................... 1-15, 1-25, 1-63
315121-0165 ... WASHER PLAIN, TBRSB 8,4/26 H=5 ....................... 1-31, 1-45, 1-51, 1-57, 1-59, 3-29, 3-37, 3-39 321120-0110 ... BEARING BUSHING W/O FL, 12X14X12 MM ............................................................................ 7-7
315125-0146 ... WASHER TBRSB 5.3X15X1 A4 ........................................................................ 1-7, 1-65, 1-67, 3-21 321158-0420 ... FLANGE BUSHING, 40X44X40 MM ............................................................................................ 2-7
315125-0153 ... WASHER TBRSB 6,4X22X4 A4 ................................................................................. 1-39, 3-11, 7-7 321302-0298 ... BALL BEARING, 8X22X7 MM ...........................................................................................1-35, 1-55
315125-0165 ... WASHER TBRSB 8,4X26X5 A4 ................................................................................. 3-33, 3-35, 8-7 321308-0200 ... BALL BEARING, 10X26X8 MM ..................................................................................................1-41
315202-0204 ... O-RING 5,3X2,4 MM .......................................................................................................... 3-67, 3-69 321308-0201 ... BALL BEARING, 12X28X8 MM ...........................................................................................2-15, 7-9
315202-0215 ... O-RING 19,2X3 MM .................................................................................................. 1-35, 1-55, 2-33 321308-0203 ... BALL BEARING, 17X35X10 MM ................................................................................................ 1-37
315400-0001 ... TUBE PUN-H-6X1-BL .......................................................... 1-15, 1-25, 1-63, 2-11, 2-13, 3-81, 8-11 321308-0204 ... BALL BEARING, 20X42X12 MM ................................................................................................ 3-15
315400-0004 ... TUBE PUN-H-8X1,25-BL .............................................. 1-13, 1-29, 2-11, 3-73, 3-75, 3-77, 3-81, 8-7 321313-0103 ... BALL BEARING, 17X40X12MM .................................................................................................3-19
315400-0010 ... TUBE PUN-H-12X2-BL ................................................................... 1-13, 3-73, 3-75, 3-81, 8-7, 8-11 321316-0203 ... BALL BEARING, 17X47X14 MM ............................................................................. 3-29, 3-37, 3-39
315701-0134 ... PARALLEL KEY W. ROUND ENDS 3X3X10 MM ........................................................................ 7-9 342701-0206 ... BUSHING,INT./EXT.G-THREAD G1/2"-G3/8" .......................................................................... 3-79
315701-0164 ... PARALLEL KEY W. ROUND ENDS 4X4X8 MM .......................................................................... 7-9 342713-0210 ... PLUG, EXT THREAD HEX SOCKET 8638-00-140 ......................................................... 3-73, 3-75
315701-0166 ... PARALLEL KEY W. ROUND ENDS 4X4X12 MM ...................................................................... 2-15 342713-0211 ... PLUG, EXT THREAD HEX SOCKET 8638-00-380 ......................................................... 3-67, 3-69
315701-0170 ... PARALLEL KEY W. ROUND ENDS 4X4X20 MM ............................................................... 1-37, 7-9 344502-0026 ... GREASE NIPPLE STRAIGHT R1/8 CON. ................................................................................ 1-29
315701-0202 ... PARALLEL KEY W. ROUND ENDS 5X5X22 MM ................................................................. 3-5, 3-7 350001-0006 ... PUSH-IN FITTING QS-F-G1/8-6 ...................................................................... 1-13, 3-81, 8-7, 8-11
315701-0210 ... PARALLEL KEY W. ROUND ENDS 5X5X50 MM ...................................................................... 3-15 350001-0007 ... PUSH-IN FITTING QS-F-G1/8-8 ...................................................................................... 1-13, 3-81
315701-0232 ... PARALLEL KEY W. ROUND ENDS 6X6X20 MM ...................................................... 3-33, 3-35, 7-9 350001-0009 ... PUSH-IN FITTING QS-F-G1/4-8 .................................................................... 1-13, 1-29, 3-73, 3-75
315705-0265 ... PARALLEL KEY W. ROUND ENDS 8X7X25 MM ...................................................................... 1-61 350001-0012 ... PUSH-IN FITTING QS-F-G3/8-8 ............................................................................................... 3-81
315705-0270 ... PARALLEL KEY W. ROUND ENDS 8X7X40 MM ...................................................................... 1-61 350001-0014 ... PUSH-IN FITTING QS-F-G3/8-12 ............................................................................................. 3-81
315750-0103 ... RETAINING RING SHAFT DIN 471 ST 6 ...................................................................................3-45 350002-0002 ... PUSH-IN L-FITTING QSL-F-M5-6 ............................................................................................. 3-83
315750-0105 ... RETAINING RING SHAFT DIN 471 ST 8 ...................................................................................2-13 350002-0007 ... PUSH-IN L-FITTING QSL-F-G1/8-8 .......................................................................................... 1-13
315750-0107 ... RETAINING RING SHAFT DIN 471 ST 10 .................................................................................2-15 350002-0009 ... PUSH-IN L-FITTING QSL-F-G1/4-8 .............................................................. 1-29, 3-73, 3-75, 3-83
315750-0109 ... RETAINING RING SHAFT DIN 471 ST 12 ....................................................................... 1-29, 2-15 350002-0011 ... PUSH-IN L-FITTING QSL-F-G1/4-12 ............................................................................... 3-73, 3-75
315750-0114 ... RETAINING RING SHAFT DIN 471 ST 17 ..................................................... 1-37, 3-29, 3-37, 3-39 350002-0012 ... PUSH-IN L-FITTING QSL-F-G1/8-4 .......................................................................................... 1-13
315750-0131 ... RETAINING RING SHAFT DIN 471 ST 50 ........................................................................... 3-5, 3-7 350002-0014 ... PUSH-IN L-FITTING QSL-F-G3/8-12 ............................................................................... 1-13, 3-79
315751-0103 ... RETAINING RING FOR SHAFT DIN 471 6 A2 ................................................................. 1-65, 1-67 350003-0005 ... PUSH-IN FITTING QS-F-G1/8-6-I ............................................................................................. 2-11
315751-0109 ... RETAINING RING FOR SHAFT DIN 471 12 A2 .......................................................................... 7-9 350003-0007 ... PUSH-IN FITTING QS-F-G1/4-8-I ............................................................................................. 3-83
315752-0124 ... RETAINING RING FOR BORE DIN 472 35 ST ......................................................................... 1-37 350004-0003 ... PUSH-IN L-FITTING QSL-F-8 .......................................................................................... 1-13, 1-29
315753-0117 ... RETAINING RING FOR BORE DIN 472 22 A2 ................................................................. 1-35, 1-55 350005-0003 ... PUSH-IN T-FITTING QST-F-8 ....................................................................... 1-13, 2-11, 3-73, 3-75

Doc No: SPC-2667130-0102
ii-10 (20)

350005-0005 ... PUSH-IN T-FITTING QST-F-12 ............................................................... 1-13, 3-73, 3-75, 8-7, 8-11 353001-0103 ... END SLEEVE 0,75 MM2 ...................................................................................................4-29, 6-11
350006-0003 ... PUSH-IN FITTING QS-F-8H-6 ....................................................................................................2-11 353001-0104 ... END SLEEVE 1,5 MM2 ..............................................................................................................4-29
350006-0006 ... PUSH-IN FITTING QS-F-10H-8 ..................................................................................................1-21 353001-0105 ... END SLEEVE 2,5 MM2 ..............................................................................................................4-29
350006-0007 ... PUSH-IN FITTING QS-F-12H-6 ..................................................................................................3-81 353001-0108 ... END SLEEVE 10 MM2 ...............................................................................................................4-29
350007-0011 ... PUSH-IN T-FITTING QST-F-G1/4-12 ............................................................................... 1-13, 3-83 353001-0113 ... END SLEEVE 0,75MM2 .............................................................................................................5-11
350013-0002 ... PLUG QSC-6H ............................................................................................................................1-13 353001-0114 ... END SLEEVE 1,5MM2 ...............................................................................................................5-11
350013-0003 ... PLUG QSC-8H ............................................................................................................................3-81 353001-0115 ... END SLEEVE 2,5/14 ..................................................................................................................5-11
350015-0004 ... Y-FITTING QSY-F-8-6 .................................................................................................................3-81 353001-0118 ... END SLEEVE 6MM2 BLACK ..................................................................................................... 4-29
351120-0264 ... CABLE SILFLEX SIHF 4X1,5 00460153 ................................................................................ 5-5, 5-7 353021-0212 ... FEED THROUGH TERMINAL, 10200.0 .................................................................................... 4-25
351150-0168 ... CABLE OLFLEX 4X10 MM2 LIGHT/GREY ........................................................................... 5-5, 5-7 353021-0213 ... FEED THROUGH TERMINAL, 10201.0 .................................................................................... 4-15
351150-0403 ... CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY ............................................. 3-73, 3-75, 3-83, 5-5, 5-7 353021-0215 ... FEED THROUGH TERMINAL, 10203.0 .................................................................................... 4-27
351150-0405 ... CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY ........................................................................ 5-5, 5-7 353021-0218 ... FEED THROUGH TERMINAL, 10204.0 .................................................................................... 4-15
351150-0406 ... CABLE OLFLEX 7X0,75 MM2 LIGHT/GREY ........................................................................ 5-5, 5-7 353022-0002 ... NEUTRAL TERMINAL, 10107.8 ................................................................................................ 4-17
351150-0407 ... CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY ...................................................................... 5-5, 5-7 353022-0006 ... NEUTRAL TERMINAL, 10106.8 ................................................................................................ 4-17
351150-0412 ... CABLE OLFLEX 3X1,5 MM2 LIGHT/GREY .......................................................................... 5-5, 5-7 353024-0205 ... EARTH TERMINAL, 1010.1 .......................................................................................................4-15
351150-0413 ... CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY .......................................................................... 5-5, 5-7 353024-0207 ... EARTH TERMINAL, 1010.3 .......................................................................................................4-27
351150-0424 ... CABLE OLFLEX 18X0,75 MM2 LIGHT/GREY ...................................................................... 5-5, 5-7 353024-0208 ... EARTH TERMINAL, 1010.4 ...................................................................... 4-7, 4-9, 4-11, 4-13, 4-15
351150-0425 ... CABLE OLFLEX 25X0,75 MM2 LIGHT/GREY ...................................................................... 5-5, 5-7 353024-0212 ... EARTH TERMINAL, 10363.0 ............................................................................................4-19, 4-21
351160-0102 ... CABLE (1UNIT = 100M) .....................................................................................................4-29, 6-11 353031-0203 ... END SUPPORT, WEW 35/2 ......................................... 4-7, 4-9, 4-11, 4-13, 4-17, 4-19, 4-21, 4-25
351160-0104 ... CABLE AWM 1X1,5 MM2 DARKBLUE ....................................................................................... 4-29 353032-0009 ... END PLATE, WAP FOR WDK ......................................................................................... 4-19, 4-21
351160-0108 ... CABLE AWM 1X10 MM2 DARKBLUE ........................................................................................ 4-29 353033-0104 ... END PLATE, 10502.8 .................................................................................................................4-17
351161-0104 ... CABLE AWM LIGTH BLUE 1,5MM2 .......................................................................................... 4-29 353033-0105 ... PARTITITION, 10501.0 .....................................................................................................4-25, 4-27
351161-0109 ... CABLE AWM 1X16 MM2 LIGHTBLUE ....................................................................................... 4-29 353034-0030 ... BRIDGE CONNECTOR WQV 2,5/10, 10544.6 ......................................................................... 4-25
351162-0104 ... CABLE AWM 1X1,5 MM2 YELLOW-GREEN .................................................................... 2-25, 4-29 353034-0033 ... BRIDGE CONNECTOR, WQV 10/10, 10524.6 ......................................................................... 4-27
351162-0105 ... CABLE AWM 1X2,5 MM2 YELLOW-GREEN ............................................................................. 4-29 353041-0001 ... RAIL 10X3MM SSCH ................................................................................................................. 4-17
351162-0107 ... CABLE AWM 1X6 MM2 YELLOW-GREEN ................................................................................ 4-29 353041-0106 ... HOLDER ZB35 K 5026.8 ............................................................................................................4-17
351162-0108 ... CABLE AWM 1X10 MM2 YELLOW-GREEN .............................................................................. 4-29 353042-0004 ... RAIL TS 35/7,5 ..................................................................................................................1-19, 4-23
351162-0109 ... CABLE AWM 1X16 MM2 YELLOW-GREEN .............................................................................. 4-29 353101-0120 ... CABLE SHOE 0,5-1,5MM2 M4 RED .................................. 1-19, 1-49, 2-25, 3-85, 3-87, 4-33, 5-11
351163-0107 ... CABLE AWM 1X6 MM2 RED ......................................................................................................4-29 353101-0132 ... CABLE SHOE 1,5-2,5MM2 M5 BLUE ............................................................................... 3-61, 3-63
351164-0104 ... CABLE AWM 1X1,5 MM2 BLACK ...............................................................................................4-29 353103-0120 ... CABLE SHOE 1,25 MM2 RED ...................................................................................................4-33
351164-0105 ... CABLE (1UNIT = 100M) ..............................................................................................................4-29 353250-0020 ... GLAND, LOCKNUT M20X1,5 ................................................................. 1-9, 2-35, 5-11, 7-13, 7-15
351164-0107 ... CABLE AWM 1X6 MM2 BLACK ..................................................................................................4-29 353250-0025 ... GLAND, LOCKNUT M25X1,5 .................................................................................................... 5-11
351164-0108 ... CABLE AWM 1X10 MM2 BLACK ................................................................................................4-29 353250-0040 ... GLAND, LOCKNUT M40X1,5 .................................................................................................... 4-43
351164-0109 ... CABLE AWM 1X16 MM2 BLACK ................................................................................................4-29 359000-0300 ... MARKING CO1/3"0" ...................................................................................................................5-11
351191-0002 ... CABLE UL 1X0,75 MM2 YELLOW-GREEN .......................................................................... 5-5, 5-7 359000-0301 ... MARKING CO1/3"1" ...................................................................................................................5-11
351191-0004 ... CABLE UL 1X1,5 MM2 YELLOW-GREEN ............................................................................ 5-5, 5-7 359000-0302 ... MARKING CO1/3"2" ...................................................................................................................5-11
351191-0007 ... CABLE UL 1X6 MM2 YELLOW-GREEN ............................................................................... 5-5, 5-7 359000-0303 ... MARKING CO1/3"3" ...................................................................................................................5-11
351191-0009 ... CABLE UL 1X16 MM2 YELLOW-GREEN ............................................................................. 5-5, 5-7 359000-0304 ... MARKING CO1/3"4" ...................................................................................................................5-11
351301-0050 ... ACTUATOR/SENSOR CABLE PRKMV 3-06/5M .............................................................. 3-73, 3-75 359000-0305 ... MARKING CO1/3"5" ...................................................................................................................5-11
352110-0100 ... CABLE CLIPS, D=5-7 MM .............................................................................................................1-7 359000-0306 ... MARKING CO1/3"6" ...................................................................................................................5-11
352113-0101 ... CLIP STRIP, 92X2,5 MM .......................................................................................... 1-13, 3-77, 5-11 359000-0307 ... MARKING CO1/3"7" ...................................................................................................................5-11
352113-0206 ... ANCHOR PLATES FOR STRIPS, TYPE ABM100-AT .............................................................. 1-13 359000-0308 ... MARKING CO1/3"8" ...................................................................................................................5-11
359000-0309 ... MARKING CO1/3"9" ....................................................................................................................5-11 436685-0000 ... RAIL ...................................................................................................................................3-41, 3-43
359000-0720 ... MARKING CO1/3"U" ...................................................................................................................5-11 440950-0000 ... ANGLE BRACKET ................................................................................ 3-51, 3-53, 3-55, 3-57, 3-59
359000-0721 ... MARKING CO1/3"V" ................................................................................................................... 5-11 442471-0000 ... HOLDER .....................................................................................................................................1-55
359000-0722 ... MARKING CO1/3"W" ..................................................................................................................5-11 442474-0000 ... SPRING BRACKET ................................................................................................................... 1-35
359009-0102 ... CABLE MARKER, YELLOW, PK 2/4, 2 ...................................................................................... 1-13 449710-0200 ... STRIPPER ........................................................................................................................1-31, 1-45
359009-0222 ... CABLE MARKER, YELLOW, PK 2/4, W .................................................................................... 5-11 449743-0000 ... SHEET ........................................................................................................................................1-51
359009-0800 ... CABLE MARKER, YELLOW, PK 2/4, 0-9 ................................................................ 1-13, 3-77, 5-11 449791-0000 ... FINGER ......................................................................................................................................1-39
359010-0613 ... SIGN BOARD BSG 1/2 "N" .........................................................................................................4-17 449792-0000 ... SHAFT STAINLESS ...................................................................................................................1-39
359011-0807 ... MARKING PLATES 5-FW 1-50 .............................................................. 4-17, 4-19, 4-21, 4-25, 6-13 449793-0000 ... REEL HOLDER ..........................................................................................................................1-33
359011-0808 ... MARKING PLATES 5-FW 51-100 ..................................................................................... 4-19, 6-13 449803-0000 ... HOLDER .....................................................................................................................................1-35
359011-0809 ... MARKING PLATES 5-FW 101-150 ............................................................................................ 4-19 450799-0000 ... FLANGE ................................................................................................................................3-5, 3-7
359011-0810 ... MARKING PLATES 5-FW 151-200 ............................................................................................ 4-19 450800-0000 ... INSULATING DISK ...............................................................................................................3-5, 3-7
359011-0811 ... MARKING PLATES 5-FW 201-250 ............................................................................................ 4-19 450886-0000 ... FLANGE ................................................................................................................................3-5, 3-7
359011-0821 ... SET OF SIGNS 6-FW 1-50 ........................................................................................ 1-19, 4-15, 6-9 451404-0000 ... SHAFT STAINLESS ........................................................................................................... 2-19, 8-7
359011-0822 ... SET OF SIGNS 6-FW 51-100 .....................................................................................................4-15 451457-0000 ... PISTON ROD HEAD ..................................................................................................................1-29
359020-0201 ... SHEET OF SELF ADHESIVE DIGITS, 4 MM ................................................................... 3-61, 3-63 451458-0002 ... CYLINDER BRACKET ...............................................................................................................1-29
359240-0100 ... SIGN HOLDER FOR 359240-0001 ..................................................................... 4-7, 4-9, 4-11, 4-13 451459-0000 ... SHAFT ........................................................................................................................................1-29
359241-0124 ... SIGN: " MAIN SWITCH" ............................................................................................................... 4-5 451483-0000 ... PLATE ........................................................................................................................................1-29
359241-0228 ... SIGN: " TEMP. HEATER" ....................................................................................4-7, 4-9, 4-11, 4-13 451491-0800 ... CRADLE .......................................................................................................................................1-3
359705-0015 ... WARNING SIGN ISO, RISK OF ELECTRIC SHOCK ................................................. 3-5, 3-7, 7-29 451494-0700 ... CRADLE .......................................................................................................................................1-3
359710-0001 ... WARNING SIGN ISO, HOT SURFACE ..................................................................................... 7-29 451497-0300 ... GUIDE ROLLER ...........................................................................................................................3-3
359715-0100 ... WARNING SIGN ANSI(H), ELECTRIC SHOCK ........................................................................ 7-29 451498-0300 ... GUIDE ROLLER ...........................................................................................................................3-3
359725-0117 ... WARNING SIGN ANSI (V), HOT SURFACE ............................................................................. 7-29 451499-0000 ... SHAFT *DR ......................................................................................................................3-29, 3-39
434694-0300 ... THROTTLE ........................................................................................................................3-41, 3-43 457288-0000 ... HOLDER .......................................................................................................................................8-7
434695-0000 ... THROTTLE .................................................................................................................................3-45 457289-0000 ... BARRIER ............................................................................................................................ 2-19, 8-7
434696-0000 ... THROTTLE .................................................................................................................................3-45 458319-0000 ... ROD ............................................................................................................................................1-35
434697-0000 ... CRANK ........................................................................................................................................3-45 464750-0000 ... SHEET ..................................................................................................................................3-5, 3-7
436303-0000 ... BEAM ...........................................................................................................................................2-13 464751-0000 ... MOUNTING SHEET ............................................................................................................. 3-5, 3-7
436304-0000 ... RACK GEAR ...............................................................................................................................2-11 464754-0000 ... SLEEVE .................................................................................................................................3-5, 3-7
436308-0000 ... STEERING RAIL .........................................................................................................................2-11 466460-0003 ... PIN .....................................................................................................................................1-35, 1-55
436309-0000 ... STEERING RAIL .........................................................................................................................2-11 476433-0000 ... SUPPORT .........................................................................................................................3-61, 3-63
436310-0000 ... GEAR WHEEL ............................................................................................................................2-15 476881-0000 ... FASTENING BRACKET .............................................................................................................. 8-7
436311-0000 ... SHAFT .........................................................................................................................................2-15 476975-0000 ... WHEEL .......................................................................................................................................7-21
436312-0000 ... BRACKET ....................................................................................................................................2-13 479375-0000 ... HOLDER ........................................................................................................................... 1-47, 1-53
436321-0000 ... FRONT PLATE .................................................................................................................. 3-41, 3-43 479387-0500 ... FILM CONTROL .........................................................................................................................1-45
436324-0000 ... SHEET .........................................................................................................................................2-13 479388-0500 ... FILM CONTROL .........................................................................................................................1-51
436325-0000 ... PIPE .............................................................................................................................................2-13 479778-0000 ... DOLLY JAW ...............................................................................................................................2-13
436326-0000 ... HOLDER ......................................................................................................................................2-13 479779-0000 ... HOLDER .....................................................................................................................................2-13
436327-0000 ... SHAFT .........................................................................................................................................2-13 479783-0000 ... SHAFT ........................................................................................................................................2-15
436328-0000 ... BARRIER .....................................................................................................................................2-13 479785-0000 ... WASHER ....................................................................................................................................2-13
436329-0000 ... PLATE .........................................................................................................................................2-13 479786-0000 ... WASHER ....................................................................................................................................2-15
436678-0000 ... SHAFT .........................................................................................................................................2-13 479787-0000 ... SHAFT ........................................................................................................................................2-15

Doc No: SPC-2667130-0102
ii-12 (20)

484632-0000 ... CANTILEVER ..............................................................................................................................1-29 538229-0000 ... INSULATING DISK ...............................................................................................................3-5, 3-7
484633-0005 ... PILLAR .........................................................................................................................................1-29 538755-0000 ... COVER PLATE RIGHT .................................................................................................... 3-67, 3-69
484641-0000 ... WEDGE .......................................................................................................................................1-29 538756-0000 ... COVER PLATE LEFT .......................................................................................................3-67, 3-69
484667-0001 ... SPACER .............................................................................................................................3-61, 3-63 538757-0001 ... COVERING PLATE ......................................................................................................................7-9
484667-0002 ... SPACER .............................................................................................................................3-61, 3-63 538757-0002 ... COVERING PLATE ......................................................................................................................7-9
484701-0000 ... SHUTTER ....................................................................................................................................7-27 541572-0000 ... WIRE ELEMENT ..........................................................................................................................3-9
484941-0000 ... HOLDER ......................................................................................................................................1-35 541581-0000 ... MOUNTING BAR ....................................................................................................................... 2-15
484942-0000 ... BRACKET .......................................................................................................................... 1-35, 1-55 541585-0000 ... SHAFT ..........................................................................................................................................7-9
484943-0000 ... SHAFT .........................................................................................................................................1-35 541588-0000 ... PROTECTION ..............................................................................................................................7-9
484944-0000 ... SHAFT .........................................................................................................................................1-35 541589-0000 ... PROTECTION ..............................................................................................................................7-9
484945-0000 ... ARM ....................................................................................................................................1-35, 1-55 541590-0000 ... SPACER .......................................................................................................................................7-9
484946-0400 ... FILM TENSIONER UPPER .........................................................................................................1-31 542889-0000 ... BOTTOM SECTION .............................................................................. 3-51, 3-53, 3-55, 3-57, 3-59
484947-0400 ... FILM TENSIONER LOWER ........................................................................................................1-51 544886-0000 ... INSULATION ......................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59
484949-0000 ... SHAFT .........................................................................................................................................1-55 544887-0000 ... INSULATION ......................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59
486729-0000 ... SHAFT .........................................................................................................................................1-31 545977-0000 ... SHEET ........................................................................................................................................1-45
486924-0000 ... HOLDER ......................................................................................................................................2-19 545978-0000 ... SHEET ........................................................................................................................................1-45
486925-0000 ... HOLDER ......................................................................................................................................2-19 547095-0000 ... SLIDE SHEET ............................................................................................................................3-65
486926-0200 ... FILM CATCH .................................................................................................................................2-3 547097-0000 ... HOLDER ........................................................................................................................... 3-67, 3-69
486950-0000 ... SHAFT .........................................................................................................................................2-19 547098-0000 ... ROLL .................................................................................................................................3-67, 3-69
493628-0700 ... COVERING PLATE .......................................................................................................................3-3 547099-0000 ... SLEEVE .............................................................................................................................3-67, 3-69
499777-0000 ... PLUG ...........................................................................................................................................7-21 547115-0400 ... ELEMENT GROUP ......................................................................................................................3-3
522350-0000 ... RING ......................................................................................................................... 1-35, 1-55, 2-33 547116-0000 ... COVER ..................................................................................................................................3-5, 3-7
531499-0000 ... BEARING SLEEVE ............................................................................................................ 1-61, 7-21 547117-0000 ... SHEET ..................................................................................................................................3-5, 3-7
532288-0000 ... ANGLE ...........................................................................................................................................7-9 547118-0000 ... SHAFT ...................................................................................................................................3-5, 3-7
532289-0000 ... PLATE ...........................................................................................................................................7-9 547133-0003 ... PIPE ..............................................................................................................................................7-7
532404-0000 ... SPRING .......................................................................................................................................7-21 547133-0005 ... PIPE ..............................................................................................................................................7-7
532412-0000 ... SPRING .......................................................................................................................................7-41 547183-0000 ... SLIDE SHEET ............................................................................................................................7-21
533500-0000 ... THROTTLE .................................................................................................................................3-45 547191-0002 ... SPACER ............................................................................................................................1-61, 7-21
533501-0000 ... THROTTLE .................................................................................................................................3-45 547192-0000 ... PLUG ..........................................................................................................................................7-21
533504-0000 ... GEAR WHEEL ..............................................................................................................................7-9 547194-0000 ... SCREW .............................................................................................................................1-61, 7-21
533508-0000 ... GEAR WHEEL ..............................................................................................................................7-9 547668-0000 ... COVERING PLATE .......................................................................................................... 3-67, 3-69
533509-0000 ... SHAFT ...........................................................................................................................................7-9 547669-0000 ... COVERING PLATE .......................................................................................................... 3-67, 3-69
533514-0000 ... STEERING RAIL .........................................................................................................................2-21 547676-0000 ... WHEEL .........................................................................................................................................7-9
533520-0000 ... SPROCKET ...................................................................................................................................7-9 547677-0000 ... SHAFT ..........................................................................................................................................7-9
533529-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 548246-0000 ... BRACKET ...........................................................................................................................7-7, 7-27
533530-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 548247-0000 ... BRACKET ...........................................................................................................................7-7, 7-27
533531-0000 ... PROTECTION ....................................................................................................................3-67, 3-69 548599-0000 ... WASHER ..........................................................................................................................2-11, 2-15
533532-0000 ... PLATE ................................................................................................................................3-33, 3-35 548930-0000 ... BRACKET ................................................................................................................1-15, 1-25, 1-63
533533-0000 ... PROTECTION ....................................................................................................................3-33, 3-35 549659-0000 ... SLEEVE ......................................................................................................................................7-21
533551-0000 ... SHEET ....................................................................................................3-51, 3-53, 3-55, 3-57, 3-59 549809-0000 ... ANGLE ..............................................................................................................................1-65, 1-67
536433-0000 ... SHEET .........................................................................................................................................1-45 549810-0000 ... SCREW .............................................................................................................................1-65, 1-67
536819-0000 ... ECCENTRIC ..................................................................................................................................7-9 549811-0000 ... SPACER ............................................................................................................................1-65, 1-67
549812-0000 ... HOLDER .............................................................................................................................1-65, 1-67 582291-0000 ... PROTECTION .................................................................................................................. 3-67, 3-69
549815-0000 ... BRACKET .......................................................................................................................... 1-65, 1-67 582293-0000 ... PROTECTION .................................................................................................................. 3-67, 3-69
552555-0000 ... SPACER .............................................................................................................................3-67, 3-69 582302-0000 ... SPRING .............................................................................................................................3-67, 3-69
553782-0500 ... DISCHARGE DEVICE ...................................................................................................................7-3 582341-0000 ... REEL HOLDER ............................................................................................................................7-9
555077-0000 ... PLATE .........................................................................................................................................6-11 582342-0000 ... REEL HOLDER ............................................................................................................................7-9
555287-0000 ... SPACER ......................................................................................................................................6-11 582350-0000 ... HOLDER .....................................................................................................................................2-11
555288-0000 ... SPACER ......................................................................................................................................6-11 583399-0102 ... PUSHBUTTON BOARD ............................................................................................................ 6-11
555333-0000 ... SPACER ......................................................................................................................................6-11 589650-0100 ... CONTACT LINK ...........................................................................................................................2-3
555334-0000 ... HOLDER ......................................................................................................................................6-11 589653-0000 ... CONTACT LINK .........................................................................................................................2-29
556147-0001 ... CONVEYOR BELT .............................................................................................................3-33, 3-35 589654-0000 ... CONTACT LINK .........................................................................................................................2-29
556147-0002 ... CONVEYOR BELT .............................................................................................................3-33, 3-35 589655-0000 ... DRILLING JIG ............................................................................................................................2-29
560905-0000 ... PLATE .........................................................................................................................................1-29 589657-0000 ... SHEET ........................................................................................................................................2-27
570484-0000 ... SPACER ......................................................................................................................................6-11 589663-0000 ... JOINT PIECE .............................................................................................................................1-61
571446-0000 ... HOLDER ........................................................................................................................................7-7 589664-0000 ... COVERING PLATE ....................................................................................................................1-61
571447-0000 ... SHAFT ...........................................................................................................................................7-7 593682-0000 ... MACHINE SIGN EEA(CE-MARK) ............................................................................................... 7-3
573312-0200 ... DISCHARGER ...............................................................................................................................7-5 596929-0100 ... GUIDE ROLLER ............................................................................................................... 1-31, 1-45
573313-0000 ... SHEET ...........................................................................................................................................7-9 596935-0000 ... BRACKET ...................................................................................................................................2-27
573314-0000 ... PROTECTION ...............................................................................................................................7-9 596936-0000 ... BRACKET ...................................................................................................................................2-27
573472-0000 ... SHEET ...........................................................................................................................................7-9 596952-0000 ... COVERING PLATE ....................................................................................................................1-61
573481-0000 ... SIGN ..............................................................................................................................................2-5 596953-0000 ... INSULATING HOLDER ..............................................................................................................2-29
573482-0000 ... SIGN ..............................................................................................................................................2-5 599748-0101 ... COOLING AIR INTAKE .................................................................................................. 4-35, 10-11
574658-0000 ... LOGOTYPE TP ..................................................................................................................3-41, 3-43 599749-0100 ... COOLING AIR OUTLET ................................................................................................... 4-39, 10-7
575023-0000 ... PROTECTION ....................................................................................................................1-31, 1-45 599750-0000 ... FILTER ............................................................................................................................4-37, 10-13
575024-0000 ... PROTECTION .............................................................................................................................1-31 599751-0000 ... INSERT .........................................................................................................4-37, 4-41, 10-9, 10-13
575026-0000 ... PROTECTION ....................................................................................................................1-31, 1-45 599752-0000 ... COVER ......................................................................................................... 4-37, 4-41, 10-9, 10-13
575028-0000 ... SUPPORT ...................................................................................................................................1-45 599753-0000 ... SPACER ....................................................................................................... 4-37, 4-41, 10-9, 10-13
575029-0000 ... SUPPORT ...................................................................................................................................1-45 599755-0000 ... GASKET ....................................................................................................... 4-37, 4-41, 10-9, 10-13
575036-0001 ... SAFETY SCREW ...............................................................................................................3-67, 3-69 599760-0000 ... SPACER ..........................................................................................................................4-37, 10-13
575037-0000 ... PIPE .............................................................................................................................................1-43 722183-0000 ... HOLDER .....................................................................................................................................8-11
575038-0100 ... BOBBIN HOLDER .................................................................................................... 1-31, 1-45, 1-51 722258-0700 ... POSITIONING DEVICE ...............................................................................................................8-3
575039-0000 ... RETAINING RING .......................................................................................................................1-43 722493-0001 ... RAIL ...................................................................................................................................3-41, 3-43
575040-0000 ... GUIDE .........................................................................................................................................1-51 722494-0001 ... SLIDE RAIL .......................................................................................................................3-41, 3-43
575041-0000 ... GUIDE .........................................................................................................................................1-51 722497-0000 ... INSULATION .....................................................................................................................3-47, 3-49
575042-0000 ... REEL HOLDER ...........................................................................................................................1-31 722498-0000 ... INSULATION .....................................................................................................................3-47, 3-49
575043-0000 ... REEL HOLDER ...........................................................................................................................1-31 722499-0000 ... INSULATION ......................................................................................... 3-51, 3-53, 3-55, 3-57, 3-59
578197-0000 ... SPACER ......................................................................................................................................3-11 722500-0000 ... BOTTOM PANEL .................................................................................. 3-51, 3-53, 3-55, 3-57, 3-59
578874-0000 ... HF BRAIDED WIRE 1,6 MM2 ............................................................................. 4-7, 4-9, 4-11, 4-13 722502-0000 ... BOTTOM SECTION .............................................................................. 3-51, 3-53, 3-55, 3-57, 3-59
582084-0000 ... PRINTED CIRCUIT BOARD .......................................................................................................6-13 722503-0000 ... FRAME SIDE RIGHT ............................................................................ 3-51, 3-53, 3-55, 3-57, 3-59
582260-0000 ... SPACER ......................................................................................................................................1-47 722504-0000 ... FRAME SIDE LEFT ............................................................................... 3-51, 3-53, 3-55, 3-57, 3-59
582264-0000 ... ROLL ..............................................................................................................................................7-9 722534-0000 ... SPROCKET ...................................................................................................................... 3-33, 3-35
582265-0000 ... GEAR WHEEL ..............................................................................................................................7-9 722535-0000 ... SPROCKET ...................................................................................................................... 3-33, 3-35
582268-0000 ... MOUNTING SHEET ....................................................................................................................2-23 722570-0001 ... CABLE TRENCH .............................................................................................................. 3-61, 3-63

Doc No: SPC-2667130-0102
ii-14 (20)

722570-0002 ... CABLE TRENCH ............................................................................................................... 3-61, 3-63 779910-0101 ... PADLOCK ....................................................................................................................................5-9
722884-0000 ... SIDE PLATE ................................................................................................................................7-21 959656-0000 ... COTTER ..............................................................................................4-35, 4-39, 6-11, 10-7, 10-11
722885-0000 ... END SECTION PIECE ................................................................................................................7-21 959657-0000 ... HINGE FLANGE .................................................................................. 4-35, 4-39, 6-11, 10-7, 10-11
722886-0000 ... COVERING PLATE .....................................................................................................................7-21 959658-0000 ... SPRING ............................................................................................... 4-35, 4-39, 6-11, 10-7, 10-11
722901-0002 ... PIPE ....................................................................................................................................7-23, 7-25 972146-0000 ... COVER PLATE ...................................................................................................4-7, 4-9, 4-11, 4-13
722901-0003 ... PIPE ....................................................................................................................................7-23, 7-25 975054-0000 ... ROLL ........................................................................................................................1-15, 1-25, 1-63
722904-0000 ... WHEEL ........................................................................................................................................1-61 975324-0000 ... MOUNTING SHEET ................................................................................................ 1-15, 1-25, 1-63
722905-0000 ... SHAFT .........................................................................................................................................1-61 975325-0000 ... MOUNTING SHEET ................................................................................................ 1-15, 1-25, 1-63
722906-0000 ... HUB .............................................................................................................................................1-61 975326-0000 ... CYLINDER BRACKET .............................................................................................1-15, 1-25, 1-63
722907-0000 ... BEARING CONSOLE ..................................................................................................................1-61 975327-0000 ... LINK ARM ................................................................................................................ 1-15, 1-25, 1-63
722908-0000 ... COVER ........................................................................................................................................1-61 975328-0000 ... SHAFT ..................................................................................................................... 1-15, 1-25, 1-63
722909-0000 ... SUPPORT ...................................................................................................................................1-61 975329-0000 ... WASHER .................................................................................................................1-15, 1-25, 1-63
722918-0000 ... BRACKET ....................................................................................................................................1-63 975332-0000 ... STRUT .....................................................................................................................1-15, 1-25, 1-63
722919-0000 ... BRACKET ....................................................................................................................................1-63 975849-0000 ... SPACER .....................................................................................................................................6-11
722928-0000 ... COVER ........................................................................................................................................1-61 975880-0000 ... HINGE FLANGE .................................................................................. 4-35, 4-39, 6-11, 10-7, 10-11
722929-0000 ... COVER ........................................................................................................................................1-61 975888-0011 ... STRUT ..........................................................................................................4-35, 4-39, 10-7, 10-11
722936-0000 ... SPROCKET .................................................................................................................................1-61 975889-0014 ... STRUT ..........................................................................................................4-35, 4-39, 10-7, 10-11
722937-0000 ... COVER ........................................................................................................................................8-11 975917-0000 ... KEY FOR SAFETY SWITCH 90044-103 ......................................................................... 3-67, 3-69
722940-0000 ... PLATE ................................................................................................................................3-29, 3-39 975924-0000 ... WASHER ..........................................................................................................................3-67, 3-69
722941-0000 ... SPACER .............................................................................................................................3-29, 3-39 975958-0000 ... PLATE ........................................................................................................................................6-11
722985-0000 ... COVERING PLATE ............................................................................................................3-47, 3-49 1020634-0001 . HOLDER .....................................................................................................................................7-27
722986-0000 ... COVERING PLATE ............................................................................................................3-47, 3-49 1021374-0000 . BRACKET .....................................................................................................................................6-7
722987-0000 ... COVERING PLATE ............................................................................................................3-47, 3-49 1074209-0000 . BRACKET ...................................................................................................................................3-79
722988-0000 ... COVERING PLATE ............................................................................................................3-47, 3-49 1086175-0000 . HOLDER .....................................................................................................................................7-41
722990-0000 ... FASTENING BRACKET .................................................................................................... 3-41, 3-43 1086176-0001 . HOLDER .......................................................................................................................................7-7
722997-0000 ... ARM ...........................................................................................................................1-15, 1-25, 1-63 1086176-0002 . HOLDER .......................................................................................................................................7-7
723744-0200 ... ATTACHMENT ..............................................................................................................................7-5 1086180-0000 . SLEEVE ............................................................................................................ 1-23, 1-61, 7-7, 7-21
723745-0000 ... CANTILEVER ................................................................................................................................7-7 1086222-0000 . JOINT PIECE ......................................................................................................................1-23, 7-7
723746-0000 ... CANTILEVER ................................................................................................................................7-7 1086223-0000 . SPACER PIECE ............................................................................................... 1-23, 1-61, 7-7, 7-21
723747-0001 ... PIPE ...............................................................................................................................................7-7 1086298-0000 . COVERING PLATE ......................................................................................................................7-7
723749-0000 ... BRACKET ......................................................................................................................................7-7 1086305-0002 . SLIDE RAIL ................................................................................................................................1-23
723750-0000 ... DOWEL .........................................................................................................................................7-7 1086305-0003 . SLIDE RAIL ..................................................................................................................................7-7
723751-0001 ... SPACER ........................................................................................................................................7-7 1086383-0000 . JOINT PIECE ....................................................................................................................1-61, 7-21
723857-0000 ... STEERING ..................................................................................................................................1-61 1086637-0000 . SLEEVE ................................................................................................................... 1-27, 7-23, 7-25
723858-0000 ... SHAFT .........................................................................................................................................7-21 1086638-0000 . DOLLY ......................................................................................................................1-27, 7-23, 7-25
723859-0000 ... WHEEL ........................................................................................................................................7-21 1086996-0000 . COVER .......................................................................................................................................7-41
723891-0300 ... START-UP KIT ..............................................................................................................................7-3 1138130-0000 . LOCKING BLOCK ......................................................................................................................7-39
723906-0000 ... BRACKET ......................................................................................................................................2-5 1138371-0101 . HOSE BRAKE ..............................................................................................................................8-9
723918-0000 ... REEL HOLDER ...........................................................................................................................2-33 1138684-0000 . HOLDER .....................................................................................................................................7-39
723919-0100 ... GUIDE ROLLER ............................................................................................................................2-3 1138685-0000 . COVER .......................................................................................................................................7-39
723957-0000 ... PROTECTION ...............................................................................................................................2-5 1259310-0000 . SLEEVE ......................................................................................................................................4-23
740654-0000 ... SPACER .............................................................................................................................1-65, 1-67 1294794-0000 . SUPPORT BAR ..........................................................................................................................7-27
1353500-0000 . SLIDE RAIL .................................................................................................................................1-61 2581836-0000 . GUIDE CONSOLE ............................................................................................................ 3-23, 3-27
1353501-0000 . SLIDE RAIL .................................................................................................................................1-61 2581837-0000 . SPRING ......................................................................................................................................3-25
1353502-0000 . SLIDE RAIL .................................................................................................................................1-61 2581838-0000 . WASHER ....................................................................................................................................3-25
1353503-0000 . SLIDE RAIL .................................................................................................................................1-61 2581839-0100 . SPRING PACKAGE ..........................................................................................................3-23, 3-27
1353504-0000 . SLIDE RAIL .................................................................................................................................7-21 2581840-0000 . BRACKET ...................................................................................................................................3-25
1353505-0000 . SLIDE RAIL .................................................................................................................................7-21 2581841-0000 . AXLE SUPPORT ........................................................................................................................3-25
1353506-0000 . SLIDE RAIL .................................................................................................................................7-21 2581842-0000 . SHAFT ........................................................................................................................................3-25
1353508-0000 . PANEL ...........................................................................................................................................2-5 2581843-0100 . BENDING ROLLER ....................................................................................................................3-13
1353593-0000 . ROLLER CONVEYOR ................................................................................................................ 7-17 2581844-0000 . SHAFT ........................................................................................................................................3-19
1353960-0000 . BUSBAR ......................................................................................................................................2-31 2581845-0000 . ROLLER .....................................................................................................................................3-19
1353969-0100 . TCIS KIT ........................................................................................................................................2-3 2581846-0000 . BRACKET ...................................................................................................................................3-17
1359066-0101 . HOSE BRAKE EL. W-OUT CAB. ................................................................................................. 8-9 2581847-0000 . BRACKET ...................................................................................................................................3-25
1368508-0101 . WIRE ....................................................................................................................4-7, 4-9, 4-11, 4-13 2581849-0000 . BEARING HOUSING ................................................................................................................. 3-15
1516107-0000 . CABLE HOLDER .........................................................................................................................2-31 2581852-0000 . MOUNTING SHEET ...................................................................................................................3-23
1516108-0000 . CABLE HOLDER .........................................................................................................................2-31 2581853-0000 . PROTECTION PLATE ...............................................................................................................3-11
1516109-0000 . WASHER .....................................................................................................................................2-31 2581854-0000 . SLIDE SHEET ............................................................................................................................3-11
1516110-0000 . BRACKET ....................................................................................................................................2-27 2581855-0000 . SUPPORT ARM .........................................................................................................................3-11
1516111-0000 . SUPPORT ...................................................................................................................................2-27 2581856-0000 . PROTECTION PLATE ...............................................................................................................3-11
1516112-0000 . CABLE CLAMP ............................................................................................................................2-27 2581858-0000 . STRUT ........................................................................................................................................3-21
1516114-0100 . CABLE ...........................................................................................................................................2-3 2581859-0000 . SLIDE PLATE .............................................................................................................................3-21
1516115-0000 . CONNECTION BOX TCIS ............................................................................................................ 2-3 2581860-0100 . SLIDE PLATE .............................................................................................................................3-11
1516120-0000 . COVERING PLATE .....................................................................................................................7-21 2581862-0000 . BUSHING ...................................................................................................................................3-25
1556781-0000 . CABLE .........................................................................................................................................4-33 2581865-0000 . STEERING RAIL ...............................................................................................................3-67, 3-69
1591014-0001 . PLC PROGRAMME MEDIA ................................................................................ 4-7, 4-9, 4-11, 4-13 2581866-0000 . PROTECTION PLATE ......................................................................................................3-67, 3-69
1591014-1001 . PROGRAM OBJECT CODE .......................................................................................................4-31 2581867-0000 . PROTECTION .................................................................................................................. 3-67, 3-69
2551501-0000 . CAP ..............................................................................................................................................3-17 2581868-0000 . STRUT ........................................................................................................................................3-11
2564088-0000 . PHOTOCELL BRACKET ............................................................................................................ 7-37 2581869-0000 . SPACER .....................................................................................................................................3-11
2565086-0000 . BRACKET ......................................................................................................................................1-9 2581870-0100 . CONVEYING EQUIPMENT ......................................................................................................... 1-3
2581821-0100 . DRIVE SHAFT .............................................................................................................................3-13 2581871-0000 . BUSHING ...................................................................................................................................3-25
2581822-0000 . SPROCKET .................................................................................................................................3-15 2581878-0100 . PUSHER .......................................................................................................................................1-3
2581823-0000 . SHAFT .........................................................................................................................................3-15 2581880-0000 . COVER .......................................................................................................................................1-29
2581824-0000 . SHAFT .........................................................................................................................................3-15 2581885-0000 . SPACER .....................................................................................................................................3-21
2581825-0000 . SHAFT .........................................................................................................................................3-15 2581888-0100 . CHAIN TENSIONER ....................................................................................................................7-3
2581826-0100 . SLIDE PLATE ..............................................................................................................................3-13 2581892-0100 . RAILING .....................................................................................................................................7-21
2581827-0000 . CAP ..............................................................................................................................................3-15 2581905-0000 . PIPE ..................................................................................................................................7-23, 7-25
2581828-0000 . SUPPORT ...................................................................................................................................3-17 2581910-0000 . HOLDER .................................................................................................................. 1-27, 7-23, 7-25
2581829-0000 . SUPPORT ...................................................................................................................................3-17 2581913-0000 . PIPE ..................................................................................................................................7-23, 7-25
2581830-0000 . SUPPORT ...................................................................................................................................3-17 2591916-0101 . INSTALLATION KIT .....................................................................................................................5-9
2581831-0000 . MOUNTING SHEET ....................................................................................................................3-27 2601344-0100 . SILENCER ..................................................................................................................................3-77
2581832-0000 . CONVEYOR BELT ......................................................................................................................3-13 2603999-0100 . STOP ..........................................................................................................................................1-61
2581833-0100 . GROUPING BELT .......................................................................................................................3-11 2604000-0000 . BRACKET ................................................................................................................1-15, 1-25, 1-63
2581834-0000 . ANGLE BRACKET .............................................................................................................3-23, 3-27 2604003-0000 . PROTECTION ..............................................................................................................................2-5

Doc No: SPC-2667130-0102
ii-16 (20)

2604004-0000 . PROTECTION ...............................................................................................................................2-5 2607513-0100 . ELECTRICAL CABINET MECH. ..................................................................................................4-5
2604007-0000 . BRACKET ....................................................................................................................................1-63 2607516-0100 . TERMINAL X003 ................................................................................................ 4-7, 4-9, 4-11, 4-13
2604008-0000 . BRACKET ................................................................................................................. 1-15, 1-25, 1-63 2607517-0100 . TERMINAL XL10-13 ........................................................................................... 4-7, 4-9, 4-11, 4-13
2604010-0000 . HOLDER .............................................................................................................................7-23, 7-25 2607518-0100 . TERMINAL XL90 ................................................................................................ 4-7, 4-9, 4-11, 4-13
2604011-0000 . STUD SCREW ..........................................................................................................1-27, 7-23, 7-25 2607519-0100 . ASSEMBLY PLATE ............................................................................................ 4-7, 4-9, 4-11, 4-13
2604014-0000 . HOLDER ................................................................................................................... 1-27, 7-23, 7-25 2607520-0000 . CANTILEVER ..................................................................................................... 4-7, 4-9, 4-11, 4-13
2604018-0000 . SPACER ......................................................................................................................................7-21 2607522-0000 . DOOR ..............................................................................................................................4-35, 10-11
2604019-0000 . SPACER ......................................................................................................................................1-63 2607523-0000 . EL-CABINET DOOR .........................................................................................................4-39, 10-7
2604021-0000 . BRACKET ....................................................................................................................................1-61 2614168-0000 . FRAME ..............................................................................................................................1-65, 1-67
2604022-0000 . STOP ...........................................................................................................................................1-61 2614169-0000 . BRACKET .........................................................................................................................1-65, 1-67
2604023-0000 . FRAME LEFT ................................................................................................................................2-5 2614171-0000 . TUNNEL ............................................................................................................................1-65, 1-67
2604024-0000 . FRAME RIGHT ..............................................................................................................................2-5 2614172-0000 . COVER ..............................................................................................................................1-65, 1-67
2604028-0000 . COVER ........................................................................................................................................1-61 2614173-0000 . FRAME ..............................................................................................................................1-65, 1-67
2604029-0000 . SLEEVE ..............................................................................................................................7-23, 7-25 2614174-0000 . COVER ..............................................................................................................................1-65, 1-67
2604030-0000 . STUD SCREW ...................................................................................................................7-23, 7-25 2614175-0000 . PLATE ...............................................................................................................................1-65, 1-67
2604031-0100 . PROTECTION PIPE ................................................................................................................... 7-21 2614177-0000 . PLATE ...............................................................................................................................1-65, 1-67
2604032-0000 . BRACKET ....................................................................................................................................7-27 2614179-0100 . VALVE RAMP .............................................................................................................................1-11
2604033-0000 . TUNNEL .............................................................................................................................1-65, 1-67 2614183-0000 . SPACER .......................................................................................................................................1-7
2604034-0000 . SLEEVE .................................................................................................................... 1-27, 7-23, 7-25 2614184-0000 . BRACKET .....................................................................................................................................1-5
2604035-0000 . STUD SCREW ..........................................................................................................1-27, 7-23, 7-25 2614185-0000 . GLASS ..........................................................................................................................................1-7
2604036-0000 . SPACER ......................................................................................................................................7-21 2614186-0000 . BRACKET .............................................................................................................................1-5, 1-7
2604037-0000 . COVER ........................................................................................................................................1-61 2614190-0100 . STOP ..........................................................................................................................................1-11
2604039-0000 . BRACKET ................................................................................................................. 1-15, 1-25, 1-63 2614191-0100 . STOP ..........................................................................................................................................1-11
2604041-0000 . PLATE ................................................................................................................................1-65, 1-67 2614192-0000 . SHAFT ..................................................................................................................... 1-15, 1-25, 1-63
2604042-0000 . COVER ...............................................................................................................................1-65, 1-67 2614193-0000 . BRACKET ................................................................................................................1-15, 1-25, 1-63
2604043-0000 . COVER ...............................................................................................................................1-65, 1-67 2614194-0000 . BRACKET ................................................................................................................1-15, 1-25, 1-63
2604044-0000 . HOLDER .............................................................................................................................1-65, 1-67 2614196-0000 . BRACKET .........................................................................................................................1-15, 1-25
2604045-0100 . PROTECTION ...............................................................................................................................1-3 2614197-0000 . BRACKET .........................................................................................................................1-15, 1-25
2604046-0000 . HINGE ................................................................................................................................1-65, 1-67 2614200-0000 . BRACKET .............................................................................................................................1-5, 1-7
2604047-0000 . FRAME ...............................................................................................................................1-65, 1-67 2614201-0000 . COVER .........................................................................................................................................1-5
2604048-0000 . FRAME ...............................................................................................................................1-65, 1-67 2614202-0000 . COVER .........................................................................................................................................1-5
2607498-0100 . EL-CABINET DOOR ............................................................................................................ 4-5, 10-5 2614203-0000 . COVER .........................................................................................................................................1-7
2607499-0000 . DOOR ...............................................................................................................................4-35, 10-11 2614204-0000 . COVER .........................................................................................................................................1-7
2607500-0100 . EL-CABINET DOOR ............................................................................................................ 4-5, 10-5 2614205-0100 . TUNNEL .......................................................................................................................................1-5
2607501-0000 . COVER ...............................................................................................................................4-39, 10-7 2614206-0000 . BRACKET .....................................................................................................................................1-7
2607502-0000 . CABINET .....................................................................................................................................4-43 2614207-0000 . BAR ..............................................................................................................................................1-7
2607503-0100 . CABINET .......................................................................................................................................4-3 2614208-0000 . BRACKET .....................................................................................................................................1-7
2607505-0100 . ASSEMBLY PLATE .......................................................................................................................4-5 2614212-0000 . STOP PLATE ...........................................................................................................1-15, 1-25, 1-63
2607506-0000 . ASSEMBLY PLATE .....................................................................................................................4-23 2614215-0000 . BRACKET .....................................................................................................................................1-7
2607509-0100 . TERMINAL X002 ..................................................................................................4-7, 4-9, 4-11, 4-13 2614217-0100 . EMERGENCY STOP ................................................................................................................... 1-7
2607510-0100 . TERMINAL X004 ..................................................................................................4-7, 4-9, 4-11, 4-13 2618759-0000 . COVER .......................................................................................................................................1-17
2607512-0000 . LABEL ..........................................................................................................................................6-11 2618760-0000 . PROTECTION ............................................................................................................................1-17
2618761-0000 . COVER ........................................................................................................................................1-17 2636136-0000 . COVER .........................................................................................................................................1-7
2618762-0100 . COVER ........................................................................................................................................1-11 2636137-0000 . COVER .........................................................................................................................................1-7
2618763-0000 . PLATE .........................................................................................................................................1-21 2636138-0000 . SHAFT ..........................................................................................................................................8-7
2618764-0000 . SPACER ......................................................................................................................................1-21 2636139-0000 . COVER .........................................................................................................................................1-5
2618765-0000 . PLATE .........................................................................................................................................1-17 2636140-0000 . LACE ............................................................................................................................................8-7
2618766-0000 . BRACKET ....................................................................................................................................1-21 2636141-0000 . BRACKET .....................................................................................................................................1-5
2618769-0000 . BRACKET ....................................................................................................................................1-19 2636142-0000 . SUPPORT ....................................................................................................................................1-5
2618770-0000 . PLATE .........................................................................................................................................1-21 2636143-0000 . SUPPORT ....................................................................................................................................1-5
2618772-0200 . LIFT ................................................................................................................................................1-5 2636144-0000 . BEAM ............................................................................................................................................2-5
2618773-0200 . CONNECTION BOX ....................................................................................................................1-11 2636145-0000 . SLEEVE ........................................................................................................................................8-7
2618774-0000 . CONNECTION BOX ....................................................................................................................1-19 2636151-0000 . ANGLE BRACKET .......................................................................................................................1-7
2618783-0000 . GUIDE .........................................................................................................................................1-21 2636152-0000 . BRACKET .....................................................................................................................................1-7
2618785-0100 . LIFT ..............................................................................................................................................1-11 2636153-0000 . COVER .........................................................................................................................................1-5
2618786-0100 . CONV.BODY,STRAIGHT ........................................................................................................... 1-11 2636154-0000 . ANGLE BRACKET .......................................................................................................................1-7
2618787-0000 . COVERING PLATE .....................................................................................................................1-23 2636155-0000 . COVER .........................................................................................................................................1-5
2618788-0000 . COVERING PLATE .....................................................................................................................1-23 2636156-0000 . SPACER ............................................................................................................................1-25, 1-63
2618789-0000 . PLATE .........................................................................................................................................1-21 2636157-0000 . FRAME .........................................................................................................................................1-5
2618790-0000 . PLATE .........................................................................................................................................1-21 2636774-0100 . RAILING .......................................................................................................................................1-5
2618791-0000 . PLATE .........................................................................................................................................1-21 2636779-0000 . PIPE ............................................................................................................................................1-27
2618792-0000 . SPACER ......................................................................................................................................1-21 2636781-0000 . HINGE ..........................................................................................................................................1-5
2618793-0000 . PLATE .........................................................................................................................................1-21 2636782-0000 . COVER .........................................................................................................................................1-5
2618794-0000 . SPACER ......................................................................................................................................1-21 2636783-0000 . FRAME .........................................................................................................................................1-5
2618795-0000 . GUIDE .........................................................................................................................................1-21 2636784-0000 . BRACKET .....................................................................................................................................1-5
2618805-0000 . GUIDE .........................................................................................................................................1-11 2636785-0000 . COVER .........................................................................................................................................1-5
2618806-0000 . GUIDE .........................................................................................................................................1-11 2636805-0100 . PANEL ..........................................................................................................................................6-3
2636112-0000 . SET OF SIGNS ...........................................................................................................................1-13 2636806-0100 . CABINET ......................................................................................................................................6-5
2636118-0000 . PROTECTION .............................................................................................................................3-11 2636807-0000 . PANEL DOOR ..............................................................................................................................6-7
2636119-0000 . PROTECTION PLATE ................................................................................................................3-11 2636808-0100 . PANEL DOOR ..............................................................................................................................6-5
2636120-0000 . FRAME LEFT .....................................................................................................................3-61, 3-63 2636809-0000 . PANEL DOOR ............................................................................................................................6-11
2636121-0000 . FRAME LEFT .....................................................................................................................3-61, 3-63 2636810-0000 . COVER .......................................................................................................................................6-11
2636123-0000 . FRAME RIGHT ...................................................................................................................3-61, 3-63 2636811-0100 . TERMINAL X010 ..........................................................................................................................6-7
2636124-0000 . FRAME RIGHT ...................................................................................................................3-61, 3-63 2636812-0000 . SLEEVE ......................................................................................................................................1-23
2636125-0100 . FRAMEWORK ...............................................................................................................................2-3 2636813-0000 . JOINT PIECE .............................................................................................................................1-23
2636127-0000 . PANEL ...........................................................................................................................................2-5 2636821-0000 . SHEET ..........................................................................................................................................2-5
2636128-0000 . BEAM .............................................................................................................................................8-7 2656144-0100 . CAUTION SIGN LIST ...................................................................................................................7-3
2636129-0000 . HOLDER ........................................................................................................................................8-7 2656145-0000 . BRACKET ...................................................................................................................................3-71
2636130-0100 . KNIFE ............................................................................................................................................8-3 2656146-0100 . REGULATOR ...............................................................................................................................3-3
2636131-0000 . SUPPORT BAR .............................................................................................................................8-7 2656147-0100 . VALVE RAMP .............................................................................................................................3-77
2636132-0000 . KNIFE HOLDER ............................................................................................................................8-7 2656148-0100 . VALVE PANEL .............................................................................................................................3-3
2636133-0000 . BEARING .......................................................................................................................................8-7 2656149-0000 . WALL ..........................................................................................................................................3-77
2636134-0000 . NON-RETURN VALVE ............................................................................................................... 1-13 2656150-0000 . CABINET ....................................................................................................................................3-77
2636135-0000 . SUPPORT .....................................................................................................................................8-7 2656151-0000 . DOOR .........................................................................................................................................3-77

Doc No: SPC-2667130-0102
ii-18 (20)

2656152-0000 . PLATE .........................................................................................................................................3-77 2666279-0100 . CONNECTION BOX .................................................................................................................. 1-45
2656153-0000 . PLATE .........................................................................................................................................3-77 2666280-0100 . EMERGENCY STOP .......................................................................................................... 2-3, 7-11
2656154-0000 . SPACER ......................................................................................................................................3-77 2666283-0000 . STOP ..........................................................................................................................................1-61
2656155-0000 . BRACKET ....................................................................................................................................3-77 2666284-0100 . STACKER .....................................................................................................................................1-3
2656156-0000 . BRACKET ....................................................................................................................................3-77 2666285-0100 . TERMINAL X001 ................................................................................................ 4-7, 4-9, 4-11, 4-13
2656159-0000 . SET OF SIGNS ...........................................................................................................................3-77 2686757-0100 . PNEUMATIC CHART ...................................................................................................................7-3
2659229-0000 . PIPE .............................................................................................................................................1-27 2686758-0100 . SPEED REGULATOR VALVE .....................................................................................................3-3
2659230-0100 . CONNECTION BOX ......................................................................................................................3-3 2686759-0000 . BRACKET ...................................................................................................................................3-83
2659231-0000 . CONNECTION BOX ....................................................................................................................3-85 2686760-0100 . QUEUE GUARD .........................................................................................................................7-35
2659245-0000 . BRACKET .......................................................................................................................... 2-35, 7-15 2686761-0100 . QUEUE GUARD .........................................................................................................................7-35
2659247-0000 . BEAM ...........................................................................................................................................3-65 2686762-0100 . QUEUE GUARD .........................................................................................................................7-35
2659249-0100 . SLIDE SHEET ....................................................................................................................3-61, 3-63 2686763-0100 . CONVEYOR PARTS ....................................................................................................................7-3
2659250-0100 . FILTER-REGULATOR ................................................................................................................ 3-71 2688002-0100 . ELECTRICAL DOCUMENT .........................................................................................................5-3
2659254-0100 . FRAME ........................................................................................................................................3-11 2688003-0100 . MACHINE .....................................................................................................................................5-3
2659255-0000 . FRAME ........................................................................................................................................3-23 2688004-0100 . SPARE PART KIT ........................................................................................................................5-3
2659256-0100 . FRAME ........................................................................................................................................3-11 2690092-0000 . SPACER .....................................................................................................................................1-29
2659257-0000 . FRAME ........................................................................................................................................3-27 2690093-0000 . SPACER .....................................................................................................................................1-29
2659258-0100 . GROUPING BELT .........................................................................................................................3-3 2690094-0000 . RING .............................................................................................................................................2-9
2666173-0100 . DOLLY JAW ................................................................................................................................2-11 2690095-0000 . SHEET ........................................................................................................................................1-31
2666174-0100 . DOLLY .........................................................................................................................................2-11 2690096-0000 . SHEET ........................................................................................................................................1-31
2666175-0100 . SEALING JAW ..............................................................................................................................2-3 2690097-0000 . DELIVERED DESIGN ..................................................................................................................4-5
2666176-0000 . AXLE PIN .....................................................................................................................................2-15 2690098-0000 . FUSE PANEL SIGN .....................................................................................................................4-5
2666177-0000 . SIDE PLATE ................................................................................................................................2-15 2694050-0000 . CONNECTION BOX .................................................................................................................. 2-25
2666178-0000 . SIDE PLATE ................................................................................................................................2-15 2694051-0100 . FRAMEWORK ............................................................................................................................. 3-3
2666180-0000 . PNEUMATIC CHART ........................................................................................................ 3-77, 7-19 2694052-0000 . CONNECTION BOX ............................................................................................................. 3-5, 3-7
2666181-0000 . PNEUMATIC CHART ........................................................................................................ 3-77, 7-19 2694053-0000 . BRACKET .........................................................................................................................3-61, 3-63
2666182-0100 . FAN ................................................................................................................................................2-3 2694054-0100 . COOLING SYSTEM ...................................................................................................................10-3
2666183-0000 . BRACKET ....................................................................................................................................2-11 2701283-0000 . SHELF ........................................................................................................................................1-29
2666184-0000 . PNEUMATIC CHART ........................................................................................................ 1-13, 7-19 2701284-0000 . PROTECTION PLATE ...............................................................................................................1-29
2666262-0100 . COOLING UNIT .....................................................................................................................7-3, 7-5 2703545-0000 . PLATE ........................................................................................................................................8-11
2666263-0000 . FAN CASING ...............................................................................................................................7-11 2703547-0000 . BRACKET ...................................................................................................................................8-11
2666264-0000 . FAN HOUSING ............................................................................................................................7-11 2703548-0001 . SPACER .....................................................................................................................................8-11
2666265-0000 . MOUNTING SHEET ....................................................................................................................7-11 2703548-0002 . SPACER .....................................................................................................................................8-11
2666268-0100 . PIVOT ARM ...................................................................................................................................2-3 2703549-0000 . SHEET ........................................................................................................................................8-11
2666269-0000 . BEARING .......................................................................................................................................2-7 2703550-0000 . COVER .......................................................................................................................................8-11
2666270-0000 . BEARING .......................................................................................................................................2-7 2703551-0000 . COVER .......................................................................................................................................8-11
2666271-0000 . ARM ...............................................................................................................................................2-7 2703567-0100 . COOLING SYSTEM ............................................................................................................8-3, 10-5
2666272-0000 . ARM ...............................................................................................................................................2-7 2703568-0000 . BRACKET ...................................................................................................................................7-13
2666274-0100 . CONNECTION BOX ......................................................................................................................3-3 2703569-0100 . EMERGENCY STOP ................................................................................................................. 7-11
2666275-0000 . CONNECTION BOX .......................................................................................................... 1-49, 3-87 2703570-0000 . BRACKET ...................................................................................................................................1-15
2666276-0100 . CONNECTION BOX ....................................................................................................................2-23 2703571-0000 . GUIDE ........................................................................................................................................1-21
2666278-0100 . WARNING LAMP ..........................................................................................................................2-7 2703572-0000 . GUIDE ........................................................................................................................................1-21
2703573-0000 . COVERING PLATE .....................................................................................................................1-45
2703577-0000 . BRACKET .......................................................................................................................... 1-65, 1-67
2703578-0000 . COVERING PLATE ............................................................................................................1-65, 1-67
2703579-0000 . BRACKET .......................................................................................................................... 1-65, 1-67
2706818-0000 . INSTALLATION DRAWING ..........................................................................................................7-3
2724885-0000 . LABEL DISKETTE .......................................................................................................................4-31
2724977-0000 . FILM SPECIFICATION ..................................................................................................................7-3
2725269-0100 . MONO-CONDUCTOR CABLES ......................................................................... 4-7, 4-9, 4-11, 4-13
2725407-0000 . SLIDE SHEET .............................................................................................................................3-65
2725408-0000 . SHEET .........................................................................................................................................3-65
2744181-0000 . PROTECTION ....................................................................................................................3-67, 3-69
2747964-0100 . HOSE BRAKE ...............................................................................................................................8-3

Doc No: SPC-2667130-0102
Tetra Pak
SPC
Tetra Pak 674851-1800 Electrical Parts Index iii-1 (8)

Doc No: SPC-2667130-0102
iii-2 (8)
Pos Part No Description Page No Pos Part No Description Page No
A
A002 ............90031-0058 .......PLC, DIGITAL INPUT MODULE ................................................... 4-7, 4-9, 4-11, 4-13 B155.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-63
A003 ............90031-0058 .......PLC, DIGITAL INPUT MODULE ................................................... 4-7, 4-9, 4-11, 4-13 B156.2 .........90232-0101 .......PH.CELL E3S-CT11-D-5M .................................................................................. 1-63
A004 ............90031-0058 .......PLC, DIGITAL INPUT MODULE ................................................... 4-7, 4-9, 4-11, 4-13 B156.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-63
A005 ............90031-0059 .......PLC, DIGITAL OUTPUT MODULE ............................................... 4-7, 4-9, 4-11, 4-13 B157.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M .................................................................................. 8-11
A006 ............90031-0059 .......PLC, DIGITAL OUTPUT MODULE ............................................... 4-7, 4-9, 4-11, 4-13 B157.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 8-11
A007 ............90031-0059 .......PLC, DIGITAL OUTPUT MODULE ............................................... 4-7, 4-9, 4-11, 4-13 B158 ............90232-0117 .......PH.CELL WT4-2P135S10 ................................................................................... 1-61
A008 ............90031-0059 .......PLC, DIGITAL OUTPUT MODULE ............................................... 4-7, 4-9, 4-11, 4-13 B160.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M .................................................................................. 1-25
A010 ............90031-0031 .......ENHANCED GENIUS COMMUNICATION MODULE .................. 4-7, 4-9, 4-11, 4-13 B160.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-25
A030 ............90410-0051 .......TEMPERATURE CONTROLLER, KS 40 ..................................... 4-7, 4-9, 4-11, 4-13 B161.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M .................................................................................. 1-15
A030.3 .........311521-0154 .....BLANK RIVET 4X10 ...................................................................... 4-7, 4-9, 4-11, 4-13 B161.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-15
A030.2 .........359240-0100 .....SIGN HOLDER FOR 359240-0001 ............................................... 4-7, 4-9, 4-11, 4-13 B162.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M .................................................................................. 1-15
A030.1 .........359241-0228 .....SIGN: " TEMP. HEATER" ............................................................. 4-7, 4-9, 4-11, 4-13 B162.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-15
A031 ............90458-0961 .......SOLID-STATE RELAY G3R-ODX02SN ....................................... 4-7, 4-9, 4-11, 4-13 B163.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M .................................................................................. 1-25
A031.1 .........90458-0963 .......SOCKET, TS35 OMRON P2RF-05-E ........................................... 4-7, 4-9, 4-11, 4-13 B163.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................ 1-25
A060 ............90031-0051 .......BASEPLATE, 10-SLOT ................................................................. 4-7, 4-9, 4-11, 4-13 B164 ............90458-2775 .......PROXIMITY SWITCH SMT-8-PS-K-LED- .......................................................... 1-21
A090 ............90457-0092 .......SAFETY RELAY RT9-24VDC ....................................................... 4-7, 4-9, 4-11, 4-13 B165 ............90458-2775 .......PROXIMITY SWITCH SMT-8-PS-K-LED- .......................................................... 1-21
A091 ............90457-0092 .......SAFETY RELAY RT9-24VDC ....................................................... 4-7, 4-9, 4-11, 4-13 B166 ............90458-2775 .......PROXIMITY SWITCH SMT-8-PS-K-LED- .......................................................... 1-21
B B167 ............90458-2775 .......PROXIMITY SWITCH SMT-8-PS-K-LED- .......................................................... 1-21
B101 ............90458-0675 .......PROXIMITY SENSOR, E2EG-X5MB1-5M ........................................................... 1-55 C
B102 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 1-29 C001 ............90159-0098 .......CAPACITOR, 22000 æF 100 V .................................................... 4-7, 4-9, 4-11, 4-13
B103 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 1-29 C001.1 .........90159-0304 .......HOLDER .......................................................................................4-7, 4-9, 4-11, 4-13
B104.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M ................................................................................... 2-11 D
B104.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................. 2-11 D001 ............90031-0075 .......CPU363, SERIAL COMMUNICATION ........................................ 4-7, 4-9, 4-11, 4-13
B105 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 2-11 D001 ............90031-0076 .......CPU364, ETHERNET COMMUNICATION ................................. 4-7, 4-9, 4-11, 4-13
B106.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M ................................................................................... 1-53 D001.1 .........1591014-0001 ...PLC PROGRAMME MEDIA ......................................................... 4-7, 4-9, 4-11, 4-13
B106.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................. 1-53 F
B107.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M ................................................................................... 1-47 F000 ............90082-0013 .......OVER VOLT. PROTECT. PU 4C-R 230 VAC ............................. 4-7, 4-9, 4-11, 4-13
B107.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M ................................................................................. 1-47 F001.2 .........90233-0030 .......TUBE FUSE, 30A ......................................................................... 4-7, 4-9, 4-11, 4-13
B108 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 1-29 F001.1 .........90459-3799 .......FUSE HOLDER, MSC 10 1-POLE A250148 ............................... 4-7, 4-9, 4-11, 4-13
B110 ............90458-0675 .......PROXIMITY SENSOR, E2EG-X5MB1-5M ........................................................... 1-35 F002.2 .........90233-0030 .......TUBE FUSE, 30A ......................................................................... 4-7, 4-9, 4-11, 4-13
B111 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 2-11 F002.1 .........90459-3799 .......FUSE HOLDER, MSC 10 1-POLE A250148 ............................... 4-7, 4-9, 4-11, 4-13
B112 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 2-11 F003 ............90007-0129 .......CIRCUIT BREAKER, 1P 10 A K .................................................. 4-7, 4-9, 4-11, 4-13
B113 ............90459-2391 .......PROXIMITY SWITCH SMT-C1-PS-24V-K5.0-OE ............................................... 2-11 F005 ............90007-0128 .......CIRCUIT BREAKER, 1P 6 A K .................................................... 4-7, 4-9, 4-11, 4-13
B125.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M ................................................................. 7-37, 7-39, 7-41 F010 ............90007-0142 .......CIRCUIT BREAKER, 2P 32 A K .................................................. 4-7, 4-9, 4-11, 4-13
B125.1 .........90232-0127 .......PH.CELL E3S-CT61-L-5-5M .............................................................. 7-37, 7-39, 7-41 F011 ............90007-0156 .......CIRCUIT BREAKER, 1P 4 A K .................................................... 4-7, 4-9, 4-11, 4-13
B141 ............90459-1194 .......KEY SAF.SW. AZ16-03 ZVRK-M16 ............................................................ 3-67, 3-69 F012 ............90007-0156 .......CIRCUIT BREAKER, 1P 4 A K .................................................... 4-7, 4-9, 4-11, 4-13
B142 ............90459-1194 .......KEY SAF.SW. AZ16-03 ZVRK-M16 ............................................................ 1-65, 1-67 F025 ............90007-0129 .......CIRCUIT BREAKER, 1P 10 A K .................................................. 4-7, 4-9, 4-11, 4-13
B143 ............90459-1194 .......KEY SAF.SW. AZ16-03 ZVRK-M16 ............................................................ 1-65, 1-67 G
B144 ............90459-1194 .......KEY SAF.SW. AZ16-03 ZVRK-M16 ....................................................................... 1-7 G001 ...........90031-0068 .......PLC, POWER SUPPLY ............................................................... 4-7, 4-9, 4-11, 4-13
B150 ............90326-0015 .......THERMOCOUPLE, CR-AL NR. 12826-13 .................................................. 3-41, 3-43 G011 ...........90459-4245 .......POWER SUPPLY UNIT, 230VAC/24VDC 3,75A ........................ 4-7, 4-9, 4-11, 4-13
B155.2 .........90232-0104 .......PH.CELL E3S-CT61-D-5M ................................................................................... 1-63 G012 ...........90459-4245 .......POWER SUPPLY UNIT, 230VAC/24VDC 3,75A ........................ 4-7, 4-9, 4-11, 4-13
G
G025 ...........90459-3448 .......VARIABLE FREQUENCY DRIVE 22A-A1P5N104 ....................... 4-7, 4-9, 4-11, 4-13 K017 ............90119-0082 .......SSR 90119-67 + HEAT SINK ....................................................... 4-7, 4-9, 4-11, 4-13
H K018 ............90119-0082 .......SSR 90119-67 + HEAT SINK ....................................................... 4-7, 4-9, 4-11, 4-13
H001 ............90124-0027 .......LAMP HOLDER BA9S ......................................................................................... 6-11 K019 ............90119-0082 .......SSR 90119-67 + HEAT SINK ....................................................... 4-7, 4-9, 4-11, 4-13
H002 ............90124-0027 .......LAMP HOLDER BA9S ......................................................................................... 6-11 K020 ............90119-0082 .......SSR 90119-67 + HEAT SINK ....................................................... 4-7, 4-9, 4-11, 4-13
H003 ............90124-0027 .......LAMP HOLDER BA9S ......................................................................................... 6-11 K025 ............90075-0143 .......CONTACTOR, 4KW 24VDC ....................................................... 4-7, 4-9, 4-11, 4-13
H006 ............90038-0047 .......DIODE ...................................................................................................................6-13 K030 ............90075-0143 .......CONTACTOR, 4KW 24VDC ....................................................... 4-7, 4-9, 4-11, 4-13
H009 ............90038-0047 .......DIODE ...................................................................................................................6-13 K090.2 .........90024-0034 .......DIODE SURGE SUPPRESSOR, FD B DIL ................................. 4-7, 4-9, 4-11, 4-13
H010 ............90038-0047 .......DIODE ...................................................................................................................6-13 K090 ............90075-0125 .......CONTACTOR, 7,5KW 24VDC .................................................... 4-7, 4-9, 4-11, 4-13
H011 ............90038-0047 .......DIODE ...................................................................................................................6-13 K091.2 .........90024-0034 .......DIODE SURGE SUPPRESSOR, FD B DIL ................................. 4-7, 4-9, 4-11, 4-13
H013 ............90038-0047 .......DIODE ...................................................................................................................6-13 K098 ............90119-0108 .......RELAY OMRON G2R-2-SNI-24DC .................................... 4-7, 4-9, 4-11, 4-13, 4-21
H015 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 K098.1 .........90129-0018 .......BASE OMRON P2RF-08-E ................................................. 4-7, 4-9, 4-11, 4-13, 4-21
H016 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 K099 ............90119-0108 .......RELAY OMRON G2R-2-SNI-24DC .................................... 4-7, 4-9, 4-11, 4-13, 4-21
H017 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 K099.1 .........90129-0018 .......BASE OMRON P2RF-08-E ................................................. 4-7, 4-9, 4-11, 4-13, 4-21
H018 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M
H019 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M001 ...........90264-0032 .......FAN PAPST 220V 18W ............................................................... 4-7, 4-9, 4-11, 4-13
H020 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M001 ...........90422-0049 .......COOLER, SK 3203.100 ................................................................ 4-7, 4-9, 4-11, 4-13
H021 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M101 ...........90458-2462 .......MOTOR 3GVA072002-BSB ........................................................................... 3-5, 3-7
H022 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M102 ...........90458-2462 .......MOTOR 3GVA072002-BSB ........................................................................... 3-5, 3-7
H024 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M103 ...........90069-0020 .......GEARS, HELICAL MOTOR SK01-63L/4 ................................................... 3-33, 3-35
H025 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M104 ...........90458-0755 .......GEARS, WORM MOTOR 1600079 ..................................................................... 1-31
H026 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M105 ...........90458-0755 .......GEARS, WORM MOTOR 1600079 ..................................................................... 1-45
H027 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M106 ...........90069-0084 .......GEARS, HELICAL MOTOR SK01-71L/4 ................................................... 1-57, 1-59
H031 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M108 ...........90264-0032 .......FAN PAPST 220V 18W ....................................................................................... 2-23
H032 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M109 ...........90264-0032 .......FAN PAPST 220V 18W ....................................................................................... 2-23
H033 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 M115 ...........90069-0237 .......GEARS, WORM MOTOR FL35G020464034083 ................................................ 3-15
H034 ............90038-0045 .......LIGHT DIODE, 24-60V YELLOW ......................................................................... 6-11 P
H101 ............90458-0292 .......BASE, KT70-1001 .................................................................................................. 2-9 P001 ............90178-0007 .......HOUR COUNTER, BG 40,17-1 12-48VDC ................................. 4-7, 4-9, 4-11, 4-13
K Q
K001 ............90075-0143 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q000 ...........90111-0134 .......MAIN SWITCH P3-63/EA/SVB-SW/N/HI11/H-P3 ................ 4-5, 4-7, 4-9, 4-11, 4-13
K002 ............90075-0143 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q000.1 ........359241-0124 .....SIGN: " MAIN SWITCH" ........................................................................................ 4-5
K003 ............90075-0141 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q001 ...........90095-0073 .......OVERLOAD PROTECTION, PKZM 1,6 A ................................... 4-7, 4-9, 4-11, 4-13
K003 ............90075-0143 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q001.3 ........90259-0308 .......CONN.TERM.K&M BK 25/3-PKZ0 ............................................... 4-7, 4-9, 4-11, 4-13
K006 ............90075-0143 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q001.2 ........90259-0311 .......3 POLE BUSBAR K&M B3.1/5 ..................................................... 4-7, 4-9, 4-11, 4-13
K008 ............90075-0125 .......CONTACTOR, 7,5KW 24VDC ...................................................... 4-7, 4-9, 4-11, 4-13 Q001.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ....................................... 4-7, 4-9, 4-11, 4-13
K009 ............90075-0125 .......CONTACTOR, 7,5KW 24VDC ...................................................... 4-7, 4-9, 4-11, 4-13 Q002 ...........90095-0073 .......OVERLOAD PROTECTION, PKZM 1,6 A ................................... 4-7, 4-9, 4-11, 4-13
K010 ............90075-0143 .......CONTACTOR, 4KW 24VDC ......................................................... 4-7, 4-9, 4-11, 4-13 Q002.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ....................................... 4-7, 4-9, 4-11, 4-13
K014 ............90459-3178 .......SOLID STATE RELAY, 037N0044 ................................................ 4-7, 4-9, 4-11, 4-13 Q003 ...........90095-0072 .......OVERLOAD PROTECTION, PKZM 1,0 A ................................... 4-7, 4-9, 4-11, 4-13
K015 ............90459-3178 .......SOLID STATE RELAY, 037N0044 ................................................ 4-7, 4-9, 4-11, 4-13 Q003.3 ........90259-0308 .......CONN.TERM.K&M BK 25/3-PKZ0 ............................................... 4-7, 4-9, 4-11, 4-13

Doc No: SPC-2667130-0102
iii-4 (8)
Q
Q003.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 R101 ............284518-0200 .....TPC BAR ..............................................................................................................7-31
Q004 ...........90095-0070 .......OVERLOAD PROTECTION, PKZM 0,4 A .................................... 4-7, 4-9, 4-11, 4-13 R101 ............284518-0201 .....TPC-BAR ............................................................................................................. 2-15
Q004.3 ........90259-0308 .......CONN.TERM.K&M BK 25/3-PKZ0 ................................................ 4-7, 4-9, 4-11, 4-13 R102 ............541572-0000 .....WIRE ELEMENT ................................................................................................... 3-9
Q004.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 R103 .1 ........269698-0000 .....WIRE ELEMENT ................................................................................................... 3-9
Q005 ...........90095-0070 .......OVERLOAD PROTECTION, PKZM 0,4 A .................................... 4-7, 4-9, 4-11, 4-13 S
Q005.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 S005 ............90458-1651 .......EMERGENCY STOP, ZB4-BS-844 ZB4-BZ-104 ................................................ 6-11
Q006 ...........90095-0073 .......OVERLOAD PROTECTION, PKZM 1,6 A .................................... 4-7, 4-9, 4-11, 4-13 S106 ............2666280-0100 ...EMERGENCY STOP ............................................................................................. 2-3
Q006.2 ........90259-0311 .......3 POLE BUSBAR K&M B3.1/5 ...................................................... 4-7, 4-9, 4-11, 4-13 S108 ............2666280-0100 ...EMERGENCY STOP ........................................................................................... 7-11
Q006.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 S108 ............2703569-0100 ...EMERGENCY STOP ........................................................................................... 7-11
Q010 ...........90095-0075 .......OVERLOAD PROTECTION, PKZM 4 A ....................................... 4-7, 4-9, 4-11, 4-13 S111 ............2666280-0100 ...EMERGENCY STOP ............................................................................................. 2-3
Q010.3 ........90259-0308 .......CONN.TERM.K&M BK 25/3-PKZ0 ................................................ 4-7, 4-9, 4-11, 4-13 S112 ............2614217-0100 ...EMERGENCY STOP ............................................................................................. 1-7
Q010.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 S112 ............2666280-0100 ...EMERGENCY STOP ........................................................................................... 7-11
Q030 ...........90095-0071 .......OVERLOAD PROTECTION, PKZM 0-0,63 A ............................... 4-7, 4-9, 4-11, 4-13 S112 ............2703569-0100 ...EMERGENCY STOP ........................................................................................... 7-11
Q030.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 T
Q070.1 ........90459-1738 .......MANDATORY ACTION SIGN ISO, READ MAINTENA ............... 4-7, 4-9, 4-11, 4-13 T002 ............90245-0051 .......MATCHING TRANSF. 5KVA ....................................................... 4-7, 4-9, 4-11, 4-13
Q070 ...........90459-5138 .......RESIDUAL CURRENT DEVICE, F202 AC-25/0,03 ..................... 4-7, 4-9, 4-11, 4-13 V
Q081 ...........90095-0071 .......OVERLOAD PROTECTION, PKZM 0-0,63 A ............................... 4-7, 4-9, 4-11, 4-13 V002 ............90038-0050 .......RECTIFIER, 26/63A SKD 82/04 ................................................... 4-7, 4-9, 4-11, 4-13
Q081.1 ........90259-0317 .......AUXILARY CONTACTS, NHI 11-PKZ0 ........................................ 4-7, 4-9, 4-11, 4-13 W
R W002 ...........578874-0000 .....HF BRAIDED WIRE 1,6 MM2 ...................................................... 4-7, 4-9, 4-11, 4-13
R001 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W003 ...........1368508-0101 ...WIRE ............................................................................................ 4-7, 4-9, 4-11, 4-13
R002 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W100 ...........351150-0407 .....CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY ............................................... 5-5, 5-7
R003 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W101 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
R011 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W110 ...........351150-0403 .....CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY ................................................. 5-5, 5-7
R012 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W110 ...........351301-0050 .....ACTUATOR/SENSOR CABLE PRKMV 3-06/5M ...................................... 3-73, 3-75
R014 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W120 ...........351191-0004 .....CABLE UL 1X1,5 MM2 YELLOW-GREEN ..................................................... 5-5, 5-7
R015 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W121 ...........351191-0004 .....CABLE UL 1X1,5 MM2 YELLOW-GREEN ..................................................... 5-5, 5-7
R016 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W150 ...........351150-0403 .....CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY ........................................ 3-83, 5-5, 5-7
R017 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W201 ...........90459-0466 .......CABLE SILICABEL 4X6MM² .......................................................................... 5-5, 5-7
R018 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W202 ...........90459-0466 .......CABLE SILICABEL 4X6MM² .......................................................................... 5-5, 5-7
R019 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W211 ...........351150-0168 .....CABLE OLFLEX 4X10 MM2 LIGHT/GREY .................................................... 5-5, 5-7
R021 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W214 ...........351150-0412 .....CABLE OLFLEX 3X1,5 MM2 LIGHT/GREY ................................................... 5-5, 5-7
R022 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W217 ...........351150-0412 .....CABLE OLFLEX 3X1,5 MM2 LIGHT/GREY ................................................... 5-5, 5-7
R023 ............90121-0121 .......RESISTANCE FIXED, 0,56 KOHM, 2 W .............................................................. 6-13 W218 ...........90220-0034 .......THERMOCABLE TEX/SITW-20F-KX 2X0,5MM2 ......................................... 5-5, 5-7
W
W219 ...........351120-0264 .....CABLE SILFLEX SIHF 4X1,5 00460153 ......................................................... 5-5, 5-7 W304 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W220 ...........351120-0264 .....CABLE SILFLEX SIHF 4X1,5 00460153 ......................................................... 5-5, 5-7 W305 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W221 ...........351150-0413 .....CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY .................................................... 5-5, 5-7 W306 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W226 ...........351150-0407 .....CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY ................................................ 5-5, 5-7 W312 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W227 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 W313 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W229 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 W340 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY ................................................. 5-5, 5-7
W237 ...........351150-0424 .....CABLE OLFLEX 18X0,75 MM2 LIGHT/GREY ................................................ 5-5, 5-7 W904 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ........................................................ 5-5, 5-7
W250 ...........351150-0413 .....CABLE OLFLEX 4X1,5 MM2 LIGHT/GREY .................................................... 5-5, 5-7 W999 ...........351191-0009 .....CABLE UL 1X16 MM2 YELLOW-GREEN ...................................................... 5-5, 5-7
W251 ...........90220-0104 .......SCR. CABLE 4X1,5MM2 ................................................................................. 5-5, 5-7 X
W263 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 X007 ............90001-0033 .......WALL SOCKET OUTLET ............................................................ 4-7, 4-9, 4-11, 4-13
W264 ...........351150-0403 .....CABLE OLFLEX 3X0,75 MM2 LIGHT/GREY ................................ 3-73, 3-75, 5-5, 5-7 X011 ............90077-0099 .......PCB TERMINAL GSE 5/1 1-POLE ...................................................................... 6-13
W276 ...........351150-0425 .....CABLE OLFLEX 25X0,75 MM2 LIGHT/GREY ................................................ 5-5, 5-7 X011 :1 ........90077-0325 .......END PLATE ......................................................................................................... 6-13
W278 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X011 :2 ........359011-0807 .....MARKING PLATES 5-FW 1-50 ........................................................................... 6-13
W279 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X011 :3 ........359011-0808 .....MARKING PLATES 5-FW 51-100 ....................................................................... 6-13
W280 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X102 ............2659230-0100 ...CONNECTION BOX .............................................................................................. 3-3
W281 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X103 ............2666274-0100 ...CONNECTION BOX .............................................................................................. 3-3
W283 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X110 ............2666276-0100 ...CONNECTION BOX ............................................................................................ 2-23
W284 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X111 ............90326-0020 .......PLUG, FEMALE YELLOW CR-AL ............................................................. 3-41, 3-43
W285 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 X113 ............2666279-0100 ...CONNECTION BOX ............................................................................................ 1-45
W286 ...........351150-0405 .....CABLE OLFLEX 5X0,75 MM2 LIGHT/GREY .................................................. 5-5, 5-7 Y
W287 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 Y101 ............90458-1194 .......MONOSTABLE VALVE 5/2 ................................................................................. 3-81
W300 ...........351150-0407 .....CABLE OLFLEX 12X0,75 MM2 LIGHT/GREY ................................................ 5-5, 5-7 Y104.3 .........90042-0455 .......COIL FESTO MSFG 24VDC ............................................................................... 3-83
W301 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 Y104 ............90458-1199 .......VALVE CLOSED IN MID-POSITION, 5/3 ............................................................ 3-81
W302 ...........90458-1737 .......CABLE INCLUDED IN THE MATERIAL ......................................................... 5-5, 5-7 Y105 ............90458-1194 .......MONOSTABLE VALVE 5/2 ................................................................................... 8-7

Doc No: SPC-2667130-0102
iii-6 (8)
Y
Y110 ............90458-1194 .......MONOSTABLE VALVE 5/2 .................................................................................. 3-81
Y121 ............90458-1199 .......VALVE CLOSED IN MID-POSITION, 5/3 ............................................................. 1-13
Y124 ............2636134-0000 ...NON-RETURN VALVE ......................................................................................... 1-13
Y125 ............90459-2425 .......PRESSURE REGULATOR IN-LINE, BSP-1/4 ..................................................... 1-13
Z
Z025 ............90459-3460 .......FOOTPRINT FILTER 22-RF010-AL ............................................. 4-7, 4-9, 4-11, 4-13
Z125 ............90024-0064 .......FERRITE, RT187-102-170-A5 ...................................................... 4-7, 4-9, 4-11, 4-13

Doc No: SPC-2667130-0102
Tetra Pak
SPC binder labels. 40 mm Full width Note! This page is generated automatically.
using the variable definitions made in the front page file!!
Tetra Tray Shrink 51 Tetra Tray Shrink 51

674851-1800 674851-1800
Issue: 2005-03 Doc No: SPC-2667130-0102 Issue: 2005-03 Doc No: SPC-2667130-0102

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800
SPC binder labels. 30 mm Half width Note! This page is generated automatically.
using the variable definitions made in the front page file!!

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

674851-1800 674851-1800

TTS51 SPC-2667130-0102

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

TTS51 SPC-2667130-0102

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TTS51 SPC-2667130-0102

Uploaded by

Copyright:

Available Formats

SPC

Spare Parts Catalogue

Doc. No: SPC-2667130-0102

Copyright © 2005 Tetra Pak Group

Tetra Pak Carton Ambient AB Tetra Pak Carton Ambient AB

Doc. No. SPC-2667130-0102

Series No/Machine No Sign. 1 Infeeder

Tetra Tray Shrink 51 5 Electric Equipment

ii Part Number Index

A list of all optional equipment, optional iii Electrical Parts Index

Doc. No: SPC-2667130-0102

Date Installed Kit Added Pages Removed Pages Signature

SPC Introduction i - 1 (90)

en About the Introduction Chapter

i - 2 (90) SPC Introduction

SPC Introduction i - 3 (90)

i - 4 (90) SPC Introduction

ECM: 139816 - 20030923 W2220 410

1 NYLON WASHER G3/8

A3/FLEX ICE-WATER (See drawing on page: 2-88) Common Parts

Machine Type Group Description Used-In Group Number Page No

10 Machine Sign Data

41100 Modena Italy

Basic Design Equipment Included

B Aut. Splicing Unit B-648513 - 0400

14 13 Electrical Cabinet BE-648538 - 0200

Variables Documentation Included

8 Automatic Splicing Unit

SPC Introduction i - 5 (90)

Machine Type Group Description Used-In Group Number Page No

070 ECM: 139816 - 20030923

HOSE NIPPLE, EXT.THR. 3/8-12 MM

ELBOW, 90, INT/EXT. THREAD, NO. 2020-3/8

Machine Type Group Description Used-In Group Number Page No

i - 6 (90) SPC Introduction

SPC Introduction i - 7 (90)

i - 8 (90) SPC Introduction

The illustration (C) on page i-5 shows an example of a machine

How to Use This Spare Parts Catalogue

Items b) and c) refer to the illustration (E) on page i-6.

SPC Introduction i - 9 (90)

Information Listed in a Spare Parts Catalogue

i - 10 (90) SPC Introduction

SPC Introduction i - 11 (90)

i - 12 (90) SPC Introduction

Na obrázku (C) na stránce i-5 je uveden příklad specifikace zařízení. Údaje

Jak používat tento katalog náhradních dílů

Položky b) a c) odkazují na obrázek (E) na stránce i-6.

SPC Introduction i - 13 (90)

Informace uvedené v katalogu náhradních dílů

i - 14 (90) SPC Introduction

SPC Introduction i - 15 (90)

i - 16 (90) SPC Introduction

Illustrationen (C) på side i-5 viser et eksempel på en maskinspecifikation.

Sådan bruges dette reservedelskatalog

Punkterne b) og c) refererer til illustrationen (E) på side i-6.

SPC Introduction i - 17 (90)

Informationer der er angivet i et reservedelskatalog

i - 18 (90) SPC Introduction