RAYMING PCB & ASSEMBLY

Why Arduino ATmega 32u4 is a Highly Preferred Microcontroller Board?

The Arduino ATmega32u4 comes with a lot of features. This makes it a

widely integrated microcontroller board in several applications. Read

further to learn more about Arduino ATmega32u4 and what it offers.

Table of Contents

What is Arduino ATmega32u4?

The Arduino ATmega 32u4 is a family of 8-bit microcontrollers. It shares

some similarities with the ATmega328P. However, the Arduino

ATmega32u4 internally handles USB communication. The 328P doesn’t

communicate with a USB cable. Therefore, boards that integrate 328P

requires a USB-to-serial converter to program.

The ATMega32u4 is an 8-bit AVRs that comes with a flash memory of 32kB.

Also, it has timers, ADCs, and UARTs among others. One of the benefits of

using the Arduino ATmega 32u4 is its low cost. This board is much cheaper

than ATmega 328 boards. Also, ATmega 32u4 can execute regular things

other Arduino boards can’t. One of these things is the ability to copy a USB

mouse or keyboard.

Despite the numerous benefits of ATmega 32u4, this board has its own

drawbacks too. It can be more difficult to utilize and can be less reliable.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Furthermore, ATmega 32u4 comes with a built-in USB communication.

With this feature, there is no need for a secondary processor. There are

several microcontroller boards based on the ATmega 32u4. An example of

such microcontroller board is the Micro.

The Micro board works in a similar way with the Arduino Leonardo. This

similarity in their operation and functioning is due to the integration

of ATmega 32u4.

Since Arduino ATmega 32u4 controls its USB connection, this makes it a

more flexible option compared to 328P boards. The ATmega 32u4 can be

easily programmed to function as a mouse, MIDI controller, or a keyboard

when connected to a computer. These capabilities aren’t possible with

328P boards.

ATmega 32u4 offers support to SPI and 12C communication. Also, this

microcontroller board enables CDC communication over the universal

serial bus (USB).

Request PCB Manufacturing & Assembly Quote Now

Features of Arduino ATmega 32u4

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

ATmega 32u4

ATmega 32u4 is based on the AVR enhanced RISC architecture. It is a

CMOS 8-bit microcontroller. This device provides throughputs of 1 about

MIPS per MHz by carrying out strong instructions, enabling the

optimization of power. More features of ATmega 32u4 are mentioned

below:

High performance

ATmega 32u4 is a high performance and low power 8-bit microcontroller.

Enhanced RISC architecture

The RISC architecture is improved. It includes 135 instructions with single

clock cycle execution. Also, it is a fully static operation with 32 x 8 general

purpose working registers. This architecture is about MIPS throughput at

16MHz.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Non-volatile program and data memories

ATmega 32u4 features non-volatile data memories and program as it

comes with

 6/32KB of In-System Self-Programmable Flash

 1.25/2.5KB Internal SRAM

 512Bytes/1KB Internal EEPROM

I/O packages

The I/O packages comprise 26 programmable input/output lines, 44 lead

QFN package, 44 lead TQFP package and I/O combine LVTTL inputs and

CMOS outputs.

Special microcontroller features

ATmega 32u4 comes with an internal calibrated oscillator, programmable

brown-out detection, external & internal interrupt sources, and Power-on

Reset. Also, it comes with six different sleep modes which are Power-down,

Extended Standby, ADC Noise Reduction, Power-save, Standby, and Idle.

IEEE® std. 1149.1 compliant JTAG interface

The JTAG interface has boundary-scan capabilities based on the JTAG

standard. Also, this interface allows programming of EEPROM, Lock Bits,

and Flash.
PCB Manufacturing & Assembly Services https://www.raypcb.com/
 RAYMING PCB & ASSEMBLY

Request PCB Manufacturing & Assembly Quote Now

Other Features of Arduino ATmega32u4

 Strictly complies with Universal Serial Bus Specification Rev. 2.0

 It offers supports to data transfer rates of about 1.5 Mbit/s and 12

Mbit/s

 ATmega has six different programmable Endpoints that comes wit

In or Out Directions and with Bulk, Interrupt or Isochronous

Transfers

 Features 48 MHz from PLL to enable Full-Speed Bus Operation

 The size of configurable Endpoints of this microcontroller size is

about 256 bytes in double bank mode

 Fully independent 832 bytes USB DPRAM for endpoint memory

allocation

 Comes with suspend/Resume Interrupts

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Offers crystal-less operation to enable Low-Speed mode

 It is possible to execute CPU Reset on USB Bus Reset detection

 It is equipped with USB Bus Connection/Disconnection on

Microcontroller Request

Peripheral Features of Arduino ATmega 32u4

 Four PWM Channels that has Programmable Resolution ranging

from 2 to 16 Bits

 On-chip Temperature Sensor

 One 10-bit High-Speed Timer/Counter with PLL (64MHz) and

Compare Mode

 Four 8-bit PWM Channels

 Six PWM Channels for High-Speed Operation, with Programmable

Resolution from 2 to 11 Bits

 On-chip PLL for USB and High-Speed Timer : 32 up to 96MHz

operation

 Byte-Oriented 2-wire Serial Interface

 Output Compare Modulator

 Two 16-bit Timer/Counter with Separate Prescaler, Compare- and

Capture Mode

 One 8-bit Timer/Counter with Separate Prescaler and Compare

Mode

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Programmable Serial USART with Hardware Flow Control

 12-channels, 10-bit ADC (features Differential Channels

with Programmable Gain )

 Master/Slave SPI Serial Interface

 Programmable Watchdog Timer with Separate On-chip Oscillator

 Interrupt and Wake-up on Pin Change

 On-chip Analog Comparator

Request PCB Manufacturing & Assembly Quote Now

Applications of ATmega 32u4

ATmega 32u4 is a low power microcontroller ideal for many applications.

Some consumer electronics feature this microcontroller board.

 Automation and control process

 Sensors and instrumentation

 Consumer electronics

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Appliances

 Circuitry to control processes

 Monitoring medical equipment

 Rectification

 Motor control

 DAC applications

 Power regulation

Boards Based on the ATmega32u4 Microcontroller

There are several boards based on ATmega32u4 microcontroller.

Examples of such boards are the Arduino Leonardo board and The Micro.

Arduino Leonardo board

This board operates based on ATmega32u4. It features a power jack, a

micro USB connection, 20 I/O pins, and in-circuit serial programming. The

Leonardo works in a different way from other Arduino boards. This is

because of its inbuilt USB 2.0 communication.

Arduino Leonardo board integrates a single microcontroller to

communicate with your personal computer. This makes Leonardo a more

flexible option for communicating with a computer.

The Micro

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

This microcontroller board is also based on ATmega32u4. The Micro has

an ICSP header, a reset button, a 16 MHz crystal oscillator, and

20 digital I/O pins. This board shares some similarities with Arduino

Leonardo due to the built-in USB communication of ATmega32u4. With

this, the Micro appears to a computer as a keyboard or a mouse.

The ATmega32u4 integrated in this board is already preprogrammed

using a bootloader. This enables users to upload new code without the

need for an external hardware programming. Also, users can ignore the

bootloader and use the ICSP header to program the microcontroller. You

can use a USB connection to power the Micro.

Request PCB Manufacturing & Assembly Quote Now

What is the Difference Between Arduino ATmega32u4 and

ATmega328P?

The ATmega32u4 and ATmega328P both belong to the AVR family. These

two microcontroller boards share some similarities. However, they have

some differences. One of the differences is that the ATmega32U4 features

a USB device peripheral while the 328P doesn’t.

Furthermore, ATmega32u4 is more expensive than the ATmega328P. The

ATmega32u$ offers support to serial while ATmega32u4 only works with

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

USB. If you need a keyboard, the ATmega32u4 is a great option. However,

there are some applications that require the use of serial.

For programming, the ATmega328P requires a USB-to-serial converter.

This is because this microcontroller board doesn’t communicate with a

USB cable. The biggest benefit of ATmega32u4 is the built-in USB which

enables it function like a USB keyboard, MIDI or a mouse. Also,

ATmega32u4 is widely integrated in Aduino Leonardo and other

compatible boards.

Frequently Asked Questions

How can a bootloader be written for ATMEGA32U4?

The built-in USB interface of Arduino ATmega 32u4 is one of its great

features. This feature makes it very easy to program. All you just need to

do is to connect a USB cable and voila! The Arduino bootloader will need

to be burnt to the Arduino sketches to help upload the sketches. You can

make use of the Arduino Uno if there is no programmer.

How can a keyboard be connected to the ATMEGA32U4?

The Human Interface Device (HID)is one of the defined USB device classes.

Each USB device has a device class. The device class specifies the general

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

purpose of the USB device. There are a wide variety of classes which

include speakers, hubs, webcams, and printers among others.

Which microcontroller board is based on ATMEGA32U4?

The Micro is a microcontroller board that integrates the ATmega32u4. It

comes with 20 digital I/O pins, a reset button, a 16 MHz crystal oscillator,

an ICSP header, and a micro USB connection. The Micro features every

important element required to support the microcontroller. All you need

to do is to connect the Micro to a computer using a micro USB cable.

How can I recognize the ATmega32U4 via USB?

The ATmeaga32u4 allows the connection of USB pins to a special

hardware to perform USB signaling. The hardware pretty supports the

electronics, but, it doesn’t control the received or sent data. Also, you need

to send and receive the data to identify the device. If the chip has no

software, it won’t send any data. Windows will most likely reveal that one

of the connected USB devices has malfunctioned. However, it might not be

able to detect it.

Conclusion

Since the Arduino ATmega 32u4 controls its USB connection, this makes it

a more flexible option compared to 328P boards. The ATmega 32u4 can

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

be easily programmed to function as a mouse, MIDI controller, or a

keyboard when connected to a computer. These capabilities aren’t

possible with 328P boards.

Related Posts:

1. How to choose Highly Reflective White PCB ?

2. Why BlackBerry IoT is the most preferred platform for hacking

3. Which is the best to use between Arduino Leonardo and Arduino

UNO

4. What is the Difference Between Microcontroller and

Microprocessor?

https://www.raypcb.com/arduino-atmega-32u4/

PCB Manufacturing & Assembly Services https://www.raypcb.com/