Material name_Assignment_1

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:6_BE_Assignment_1

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Issue Date: 17th Jan, 2020 Due by: 24th Jan, 2020 5:00 PM

ECE113 Basic Electronics

Assignment 1

1) All Questions are compulsory.

2) Please use notations appropriately.

3) Maximum Marks:20 (4 marks each)

4) All the students are requested to submit hard copies of their assignments as per the deadline.

5) You can deposit your assignments in the respective boxes for each section (read the overleaf on
each box carefully) kept near the Academic Section 2nd Floor A-wing - Old Academic Building.
Please note

a) You must staple the assignment properly.

b) Mention your Name, Roll no, Section and Group clearly on each sheet of the assignment.
Specify sheet number on the top of each sheet.
c) Use A4 size sheets only (ruled or blank). Do not submit notebooks/notepads.

——-Questions——

1. Find the power absorbed by each of the elements in the circuit shown below.

Figure 1:
2. The current through an element and voltage across it is shown below in Figure 2.
a) Sketch the power delivered to the element for t>0.
b) Find the total energy absorbed by the element for the period 0<t<4s.

Figure 2.

3. Determine the current ‘i’ and voltage ‘Vo’ in the circuit shown below.

Figure 3:
Issue Date: 17 th Jan,2020 Due by: 24th Jan,2020 5:00PM

4. Determine the current io and equivalent resistance Req for the circuit shown in Figure 4.

Figure 4:

5 .Write the node-voltage equation and find the values of V1 and V2 in the given circuit.

Figure 5:
 Material name_Assignment_2

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:5_BE_Assignment_2

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Issue Date: 9th March, 2020 Due by: 16th March, 2020 5:00 PM

ECE113 Basic Electronics

Assignment 2

1) All Questions are compulsory.

2) Please use notations appropriately.

3) Maximum Marks:20 (4 marks each)

4) All the students are requested to submit hard copies of their assignments as per the
deadline.

5) You can deposit your assignments in the respective boxes for each section (read the overleaf
on each box carefully) kept near the Academic Section 2nd Floor A-wing - Old Academic Building.
Please note

a) You must staple the assignment properly.

b) Mention your Name, Roll no, Section and Group clearly on each sheet of the assignment.
Specify sheet number on the top of each sheet.
c) Use A4 size sheets only (ruled or blank). Do not submit notebooks/notepads.

——-Questions——

1. Find the Norton equivalent at terminals a-b of the circuit shown in figure below.

Figure 1:
2. For the circuit shown in figure below, what resistor to be connected across terminals a-b
that will absorb maximum power from the circuit? What will be that power?

Figure 2.

3. Consider the circuit given below, determine

(a) iC (0-), (b) iL (0-), (c) iR (0-), (d) vC (0-), (e) iC (0+), (f) iL (0+), (g) iR (0+), and (h) vC (0+).

Figure 3:
Issue Date: 9 th March,2020 Due by: 16th March, 2020 5:00PM

4. Consider the circuit given below, the two resistor values are R1 = 0.752 ohms and
R2 = 1.268 ohms, respectively. Obtain an expression for the energy stored in the capacitor,
valid for all t>0

Figure 4:

5. After being open for a day, the switch in the circuit of figure below is closed at t=0. Find the
differential equation describing i(t), t > 0.

Figure 5:
 Material name_Assignment_3

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:4_BE_Assignment_3

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Issue Date: 30th March, 2020 Due by: 9th April, 2020 5:00 PM

ECE113 Basic Electronics

Assignment 3

1) All Questions are compulsory.

2) Please use notations appropriately.
3) Maximum Marks:20 (2.5 marks each)

4) All the students are requested to submit soft copies of their assignments as per the deadline.
5) Please prepare a PDF and upload it over classroom.Mention your Name, Roll no, Section and Group(in
the similar manner as you are attending the tutorial) clearly on each sheet of the assignment. Specify
sheet number on the top of each sheet.

——-Questions——

1. Figure displays a two-op-amp instrumentation amplifier. Derive an expression for vo in terms of v1

and v2 . How can this amplifier be used as a subtractor?

2. Find vo in the op-amp circuit shown below.

3. Waveform for input signal and a circuit is shown below.Explain the working of circuit and draw
the output waveform
Issue Date: 30th March, 2020 Due by: 9th April, 2020 5:00 PM

4. In the circuit shown below diodes has cutin voltage of 0.6 V. Identify the diode/s which is in/are
ON state. Explain in detail.

5. Assuming both the diodes to be ideal determine the current I in the circuit shown below.

6. In the circuit given below the 5V Zener diode requires a minimum current of 10 mA. For obtaining
a regulated output of 5V,find the maximum permissible load current IL and the minimum power
rating of Zener diode.
Issue Date: 30th March, 2020 Due by: 9th April, 2020 5:00 PM

7. Find the current through the zener diode in the circuit given below.

8. The Zener diode in the circuit shown has a working range of current for proper regulation:

5mA ≤ Iz ≤ 50mA (1)

and a Zener voltage Vz = 50 V:

(a) If the input voltage, Vs, varies from 150 and 250 V and RL = 2.2 k, determine the range of
values for the resistor, R, to maintain regulation.
(b) If R is chosen as the midpoint of the range determined in part (a), how much variation in the
load resistance, RL , is now possible without losing regulation?
 Material name_Assignment_4

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:3_BE_QUIZ_3

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Issue Date: 28th April, 2020 Due by: 5th May, 2020 5:00 PM

ECE113 Basic Electronics

Quiz 3

1) All Questions are compulsory.

2) Please use notations appropriately.
3) Maximum Marks:20 (4 marks each)

4) All the students are requested to submit soft copies of their assignments as per the deadline.
5) Please prepare a PDF and upload it over classroom.Mention your Name, Roll no, Section and Group(in
the similar manner as you are attending the tutorial) clearly on each sheet of the assignment. Specify
sheet number on the top of each sheet.

——-Questions——

1. In the circuit shown below, find k in the voltage transfer function vo = kvs .

2. Calculate ix and vo in the circuit of Figure shown below. Find the power dissipated by the 60-k resistor.

3. Consider the full-wave rectifier circuit as shown below with C = 47µ F and transformer winding ratio of
14:1. If the input voltage is 120 VAC (RMS) at 60 Hz, what is the load resistor value for a peak-to-peak
ripple less than 0.5 V? What is the output DC voltage? Assume ideal diode.
Issue Date: 28th April, 2020 Due by: 5th May, 2020 5:00 PM

4. For the clipping circuit shown, find the output waveform vo for the input voltage,

vi = 5 sinwo t.

The diode has the following characteristics: rd = 15 Ω; Vd = 0.7 V; and rr ≈ ∞

5. For the circuit shown in the figure, draw the waveform of output voltage Vo for the input voltage,

vi = 5 sinwo t.

Assume ideal diode D and lossless capacitor C.

Material name_Assignment_3_Solution & Rubric

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:2_BE_ASSIGNMENT_3_Solution

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Q 1 Figure displays a two-op-amp instrumentation amplifier. Derive an expression for vo in
terms of v1 and v2. How can this amplifier be used as a subtractor?

Solution
Q2 Find vo in the op-amp circuit shown below.

Solution
Q 3 Waveform for input signal and a circuit is shown below

Explain the working of circuit and draw the output waveform

Solution
Q 4 In the circuit shown below diodes has cutin voltage of 0.6 V. Identify the diode/s which is
in/are ON state. Explain it clearly

Solution
Q 5 Assuming both the diodes to be ideal determine the current I in the circuit shown below.

Solution
Q-6 In the circuit given below the 5V zener diode requires a minimum current of 10 mA. For
obtaining a regulated output of 5V,find the maximum permissible load current (IL) and the
minimum power rating of Zener diode.
Q-7 Find the current through the zener diode in the circuit given below.
Q-8
Material name_Assignment_4 Solution & Rubric

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
 Filename:1_BE_ASSIGNMENT_4

Please watch our tutorial on how to use our bot in best way.
https://www.linktr.ee/reccobot

Recco Bot
Q1 In the circuit shown below, find k in the voltage transfer function vo = kvs.

Solution
Q2 Calculate ix and vo in the circuit of Figure shown below. Find the power dissipated by the
60-k resistor.

Solution:
Soln:

If exact value calculated, then Output Dc voltage Vdc= Vm-Vr(pp)/2

= 12.1-0.25 =11.85
If range, then (11.85,12.1] for Vr<0.5
Soln:
Explanation 2.5 marks
Input waveform

Output wave form

If cut in voltage of diode is neglected the input waveform = output waveform.