Annexure-A

Revised Engineering Drawing (ED) syllabus

of 40 hrs. from 80 hrs. duration for 75 trades in 29
groups
under Craftsmen Training Scheme (CTS)
applicable from 2021-22 session.

Please note that free hand Engineering Drawing will be

assessed as part of Formative assessment while, a few
MCQ question on ED will be part of Trade Theory
Computer Based Test (CBT).

Also note that for Draughtsman groups of trade, ED will

be part of trade practical exam. Changes in their syllabus,
if any, will be communicated Separately.
Engineering Drawing (ED) under CTS Annexure - A

Revised Engineering Drawing (ED) curriculum for 1-year engineering group of trades
offered under Craftsmen Training Scheme
Group 1 - Engineering Drawing
CTS Trades Covered: Artisan Using Advanced Tool, Industrial Robotics & Digital
Manufacturing Technician, Manufacturing Process Control and Automation

Sl. No. Topic Time

in hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.

3. Drawing of Geometrical figures: 4

• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.

4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the related trades.

6. Concept and reading of Drawing in 14

• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections
(definition and difference)
7. Reading of Job drawing related to trades. 8

TOTAL 40 HRS

2
Engineering Drawing (ED) under CTS Annexure - A

Group 2 - Engineering Drawing

CTS Trades Covered: Solar Technician

Sl. No. Topic Time

in hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke
4. Dimensioning Practice 2
• Types of arrowhead
5. Symbolic representation – 4
• Different electrical symbols used in the related trade.
6. Reading of Electrical Circuit Diagram 14
7. Reading of Electrical Layout drawing 8

TOTAL 40 HRS

3
Engineering Drawing (ED) under CTS Annexure - A

Group 3 - Engineering Drawing

CTS Trades Covered: Domestic Painter, Industrial Painter, Mechanic Auto Body Painting

Time in
Sl. No. Topic
hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 8
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 12
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke, double stroke,
inclined
4. Dimensioning 10
• Types of arrowhead
5. Symbolic representation – 8
• Different symbols used in the related trade.
TOTAL 40 HRS

4
Engineering Drawing (ED) under CTS Annexure - A

Group 4 - Engineering Drawing

CTS Trades Covered: Welder, Welder (Fabrication & Fitting) , Welder (GMAW & GTAW),
Welder (Pipe), Welder (Structural), Welder (Welding & Inspection)

Time in
Sl. No. Topic
hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 4
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Lines -Types and applications in drawing 2
4. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke, double stroke,
inclined
5. Reading of dimension and Dimensioning Practice. 4
6. Reading of fabrication drawing, sectional view of different types of 10
welding Joints.
Sectional view of different pipe joints
7. Symbolic representation – different symbols used in 4
the related trades
8. Reading of Job Drawing of related trades. 10
Total 40

5
Engineering Drawing (ED) under CTS Annexure - A

Group 5 - Engineering Drawing

CTS Trades Covered: Marine Engine Fitter

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Rhombus,
Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Marine Engine Fitter trade.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Marine Engine Fitter trade. 8

Total 40

6
Engineering Drawing (ED) under CTS Annexure - A

Group 6 - Engineering Drawing

CTS Trades Covered: Pump operator cum Mechanic

Sl.
Topic Time in hrs.
No.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures 4
• Angle, Triangle, Circle, Rectangle, Square, Rhombus,
Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Reading of dimension and Dimensioning Practice. 4
5. Symbolic representation – 10
• Different symbols used in the Pump operator cum
Mechanic trade.
6. Reading of Job drawing and piping Layout 14
Total 40

7
Engineering Drawing (ED) under CTS Annexure - A

Group 7 - Engineering Drawing

CTS Trades Covered: Foundryman

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 10
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. • Reading of dimension and Dimensioning Practice. 4

5. Symbolic representation – 8
• Different symbols used in the Foundryman trade.

6. • Basic of Orthographic and Isometric projections 10

• Reading of Job drawing related to Foundryman trade.

Total 40

8
Engineering Drawing (ED) under CTS Annexure - A

Group 8 - Engineering Drawing

CTS Trades Covered: Mechanic Lens/Prism Grinding

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram,
Ellipse & Parabola.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Mechanic Lens/Prism
grinding trade.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Mechanic Lens/Prism grinding 8
trade.

Total 40

9
Engineering Drawing (ED) under CTS Annexure - A

Group 9 - Engineering Drawing

CTS Trades Covered: Sheet Metal

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of - 8
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram,
Ellipse & Parabola.
• Lettering & Numbering – Single Stroke.
• Development of Surfaces
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Sheet Metal trade.
6. Concept and reading of Drawing in 10
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Sheet Metal trade. 8

Total 40

10
Engineering Drawing (ED) under CTS Annexure - A

Group 10 - Engineering Drawing

CTS Trades Covered: Plastic Processing Operator

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Plastic Processing Operator
trade.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Plastic Processing Operator trade. 8

Total 40

11
Engineering Drawing (ED) under CTS Annexure - A

Group 11 - Engineering Drawing

CTS Trades Covered: Carpenter

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. • Reading of dimension and Dimensioning Practice. 2
5. • Different joints used in the carpenter trade. 4

6. Concept and reading of Drawing in 14

• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to carpenter trade. 8

Total 40

12
Engineering Drawing (ED) under CTS Annexure - A

Group 12 - Engineering Drawing

CTS Trades Covered: Mason

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 8
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
4. • Reading of dimension and Dimensioning Practice. 4

5. Symbolic representation – 8
• Different symbols used in the trades.
6. Reading of Plan drawing 12

Total 40

13
Engineering Drawing (ED) under CTS Annexure - A

Group 13 - Engineering Drawing

CTS Trades Covered: Plumber

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 8
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
4. • Reading of dimension and Dimensioning Practice. 4

5. Symbolic representation – 10
• Different symbols and Pipe joints used in the trade.

6. Reading of layout plan drawing in piping 10

Total 40

14
Engineering Drawing (ED) under CTS Annexure - A

Group 14 - Engineering Drawing

CTS Trades Covered: Rubber Technician

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 10
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. • Reading of dimension and Dimensioning Practice. 4

5. Symbolic representation – 8
• Different symbols used in the Rubber Technician trade.

6. Reading of Job/ process drawing related to Rubber Technician 10

trade.

Total 40

15
Engineering Drawing (ED) under CTS Annexure - A

Group 15 - Engineering Drawing

CTS Trades Covered: Stone Mining Machine Operator, Stone Processing Machine Operator

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Stone Mining / Stone Processing
Machine Operator trades.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Stone Mining / Stone Processing 8
Machine Operator trades.

Total 40

16
Engineering Drawing (ED) under CTS Annexure - A

Group 16 - Engineering Drawing

CTS Trades Covered: Warehouse Technician, In Plant Logistics Assistant

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 10
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. • Reading of dimension and Dimensioning Practice. 4

5. Symbolic representation – 8
• Different packing and labeling materials used in the trades.

6. Reading of Warehouse layout / Job stacking/ pallet stack drawing 10

plan

Total 40

17
Engineering Drawing (ED) under CTS Annexure - A

Group 17 - Engineering Drawing

CTS Trades Covered: - Mechanic Auto Body Repair, Mechanic Auto Electrical and Electronics,
Mechanic Diesel, Mechanic Tractor, Mechanic Two and Three-wheeler

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the related trades of Mechanic Auto
Body Repair / Electrical and Electronics / Diesel / Tractor /
Two and Three-wheeler.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Mechanic Auto Body Repair / 8
Electrical and Electronics / Diesel / Tractor / Two and Three-wheeler
trades.

Total 40

18
Engineering Drawing (ED) under CTS Annexure - A

Revised Engineering Drawing (ED) curriculum for 1-year engineering group of trades
offered under Craftsmen Training Scheme
Group 18 - Engineering Drawing
CTS Trades Covered: Fitter, Turner, Machinist, Machinist Grinder, Mechanic Machine Tool
Maintenance, Operator Advance Machine Tool, TDM (D&M), TDM (J&F), Mechanic Mining
Machinery, Technician Mechatronics, Textile Mechatronics, Basic Designer & Virtual Verifier,
Advanced CNC machining, Aeronautical Structure & Equipment Fitter

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the related trades.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing of related trades. 8

Total 40

19
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year
Sl. Time in
Topic
No. hrs.
1. Reading of drawing of nuts, bolt, screw thread, different types of 6
locking devices e.g., Double nut, Castle nut, Pin, etc.
2. Reading of foundation drawing 6
3. Reading of Rivets and rivetted joints, welded joints 6
4. Reading of drawing of pipes and pipe joints 6
5. Reading of Job Drawing ,Sectional View & Assembly view 16

Total 40

20
Engineering Drawing (ED) under CTS Annexure - A

Group 19-Engineering Drawing

CTS Trades Covered: Electrician, Wireman, Electroplater, Lift & Escalator Mechanic,
Electrician Power Distribution
1st -Year
Sl. No. Topic Time in hrs.

1. Introduction to Engineering Drawing and 2

Drawing Instruments –
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with
dimension
• Transferring measurement from the
given object to the free hand
sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle,
Square, Parallelogram.
• Lettering & Numbering – Single
Stroke
4. Dimensioning Practice 2
• Types of arrowhead
5. Symbolic representation – 4
• Different electrical symbols used in
the related trades
6. Reading of Electrical Circuit Diagram 14
7. Reading of Electrical Layout drawing 8
Total 40

21
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year
Sl.
Topic Time in
No. hrs.
1. Reading of Electrical Sign and Symbols 4

2. Sketches of Electrical components 6

3. Reading of Electrical wiring diagram and Layout diagram 10
Reading of Electrical earthing diagram.
Drawing the schematic diagram of plate and pipe earthing.
4. Drawing of Electrical circuit diagram 10

5. Drawing of Block diagram of Instruments & equipment of trades 10

Total 40

22
Engineering Drawing (ED) under CTS Annexure - A

Group 20 - Engineering Drawing

CTS Trades Covered: Tech. Medical Electronics, Technician Mechatronics, Technician

Power Electronics System, Electronics Mechanic, Mechanic Consumer Electronics
Appliances, Tech. Electronic System Design & Repair

1st -Year
Sl.
Topic Time in hrs.
No.
1. Introduction to Engineering Drawing and 2
Drawing Instruments –
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with
dimension
• Transferring measurement from the
given object to the free hand sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle,
Square, Parallelogram.
• Lettering & Numbering – Single Stroke
4. Symbolic representation – 4
• Different Electronic symbols used in the
related trades
5. Reading of Electronic Circuit Diagram 14
6. Reading of Electronic Layout drawing 10
Total 40

23
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year

Sl.
Topic Time in
No. hrs.
1. Reading of Electronics Sign and Symbols 4

2. Sketches of Electronics components 6

3. Reading of Electronics wiring diagram and Layout diagram 6

4. Drawing of Electronics circuit diagram 12

5. Drawing of Block diagram of Instruments & equipment of trades 12

Total 40

24
Engineering Drawing (ED) under CTS Annexure - A

Group 21 - Engineering Drawing

CTS Trades Covered: Instrument Mechanic (Chemical Plant), Attendant Operator

(Chemical Plant), Laboratory Attendant (Chemical Plant), Maintenance Mechanic
(Chemical Plant)

1st -Year
Sl.
Topic Time in hrs.
No.
1. Introduction to Engineering Drawing and Drawing 2
Instruments –
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with
dimension
• Transferring measurement from the
given object to the free hand sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle,
Square, Parallelogram.
• Lettering & Numbering – Single Stroke
4. Dimensioning Practice 2
• Types of arrowhead
5. Symbolic representation – 4
• Different symbols used in the related
trades
6. Reading of chemical plant Circuit Diagram 14
7. Reading of Chemical plant Layout drawing 8
Total 40

2nd Year Engg. Drawing not required.

25
Engineering Drawing (ED) under CTS Annexure - A

Group 22 - Engineering Drawing

CTS Trades Covered: Spinning Technician, Textile wet processing Technician, Weaving
Technician

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke
4. Dimensioning Practice 2
• Types of arrowhead
5. Symbolic representation – 4
• Different symbols used in the Spinning / Textile wet
processing /weaving Technician trades.
6. Reading of chemical plant Circuit Diagram 14
7. Reading of Chemical plant Layout drawing 8

Total 40

2nd Year Engg. Drawing not required.

26
Engineering Drawing (ED) under CTS Annexure - A

Group 23 - Engineering Drawing

CTS Trades Covered: Information and Communication Technology System Maintenance,
Information Technology

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Free hand drawing of – 6
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools.
4. Symbolic representation – 12
• Different symbols used in the related trades
5. Reading of Network system Diagram& Hardware component 20

Total 40

2nd Year Engg. Drawing not required.

27
Engineering Drawing (ED) under CTS Annexure - A

Group 24 - Engineering Drawing

CTS Trades Covered: Mechanic Agricultural Machinery, Mechanic Motor Vehicle, Mechanic
Electric Vehicle

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the related trades.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing of related trades. 8

Total 40

28
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year

Sl.
Topic Time in
No. hrs.
1. Reading of Electrical, Electronic & Mechanical Sign and Symbols used 4
in Automobile.
2. Sketches of Electrical, Electronic & Mechanical components used in 6
Automobile.
3. Reading of Electrical wiring diagram and Layout diagram used in 10
Automobile.
4. Drawing of Electrical circuit diagram used in Automobile. 10

5. Drawing of Block diagram of Instruments & equipment of trades 10

Total 40

29
Engineering Drawing (ED) under CTS Annexure - A

Group 25 - Engineering Drawing

CTS Trades Covered: Refrigeration and Air conditioning & Central Air condition Plant
Mechanic

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the related trades.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to trades. 8

Total 40

30
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year

Sl.
Topic Time in
No. hrs.
1. Reading of Electrical, Electronic & Mechanical Sign and Symbols used 4
in RAC
2. Sketches of Electrical, Electronic & Mechanical components used in 6
RAC
3. Reading of Electrical wiring diagram and Layout diagram 10

4. Drawing of Electrical circuit diagram used in RAC 10

5. Drawing of Block diagram of Instruments & equipment of trades 10

Total 40

31
Engineering Drawing (ED) under CTS Annexure - A

Group 26 - Engineering Drawing

CTS Trades Covered: Painter (General)

1st -Year
Sl.
Topic Time in hrs.
No.
1. Total 40
2. Free hand drawing of – 8
• Geometrical figures and blocks with
dimension
• Transferring measurement from the
given object to the free hand sketches.
• Free hand drawing of hand tools and
measuring tools.
3. Drawing of Geometrical figures: 12
• Angle, Triangle, Circle, Rectangle,
Square, Parallelogram.
• Lettering & Numbering – Single Stroke,
double stroke, inclined
4. Dimensioning 10
• Types of arrowhead

5. Symbolic representation – 8
• Different symbols used in the Painter
(General) trades.

Total 40

2nd Year Engg. Drawing not required.

32
Engineering Drawing (ED) under CTS Annexure - A

Group 27 - Engineering Drawing

CTS Trades Covered: Marine Fitter

1st -Year
Sl.
Topic Time in hrs.
No.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the
free hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Rhombus,
Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Marine Fitter trade.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections
(definition and difference
7. Reading of Job drawing related to Marine Fitter trade. 8
Total 40

33
Engineering Drawing (ED) under CTS Annexure - A

2nd -Year

Time in
Sl. No. Topic
hrs.
1. Reading of drawing of nuts, bolt, screw thread, different 10
types of locking devices e.g., Double nut, Castle nut, Pin,
etc.
2. Reading of Rivets and rivetted joints, welded joints 10
3. Reading of drawing of pipes and pipe joints 10
4. Reading of Job Drawing & Assembly view 10

Total 40

34
Engineering Drawing (ED) under CTS Annexure - A

Group 28 - Engineering Drawing

CTS Trades Covered: Refractory Technician

1st -Year
Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 4
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 2
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 4
• Different symbols used in the Refractory Technician trade.
6. Concept and reading of Drawing in 14
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections (definition
and difference)
7. Reading of Job drawing related to Refractory Technician. 8

Total 40

2nd Year Engg. Drawing not required.

35
Engineering Drawing (ED) under CTS Annexure - A

Group 29 - Engineering Drawing

CTS Trades Covered: Vessel Navigator

1st -Year

Sl. Time in
Topic
No. hrs.
1. Introduction to Engineering Drawing and Drawing Instruments – 2
• Conventions
• Sizes and layout of drawing sheets
• Title Block, its position and content
• Drawing Instrument
2. Lines- Types and applications in drawing 6
Free hand drawing of –
• Geometrical figures and blocks with dimension
• Transferring measurement from the given object to the free
hand sketches.
• Free hand drawing of hand tools and measuring tools.
3. Drawing of Geometrical figures: 6
• Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
• Lettering & Numbering – Single Stroke.
4. Dimensioning 6
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation – 6
• Different symbols used in the Vessel Navigator trade.
7. Reading of Navigational Chart drawing 14

Total 40

2nd Year Engg. Drawing not required.

36
Engineering Drawing (ED) under CTS Annexure - A

CTS 1 Year Engineering Trade

Sl. No. Trade Duration Sector
Group
1 Mechanic Auto Body Repair 1 Year Automotive 1
Mechanic Auto Electrical and
2 1 Year Automotive
Electronics 1
3 Mechanic Diesel 1 Year Automotive 1
4 Mechanic Tractor 1 Year Automotive 1
5 Mechanic Two and Three-wheeler 1 Year Automotive 1
6 Pump Operator cum Mechanic 1 Year Automotive 2
Capital Goods &
7 Foundryman 1 Year
Manufacturing 3
Capital Goods &
8 Marine Engine Fitter 1 Year
Manufacturing 4
Capital Goods &
9 Mechanic Lens/ Prism Grinding 1 Year
Manufacturing 5
Capital Goods &
10 Sheet Metal Worker 1 Year
Manufacturing 6
Capital Goods &
11 Welder 1 Year
Manufacturing 7
Capital Goods &
12 Welder (Fabrication & Fitting) 1 Year
Manufacturing 7
Capital Goods &
13 Welder (GMAW & GTAW) 1 Year
Manufacturing 7
Capital Goods &
14 Welder (Pipe) 1 Year
Manufacturing 7
Capital Goods &
15 Welder (Structural) 1 Year
Manufacturing 7
Capital Goods &
16 Welder (Welding & Inspection) 1 Year
Manufacturing 7
Capital Goods &
17 Artisan Using Advanced Tool 1 year
Manufacturing 8
Industrial Robotics & Digital Capital Goods &
18 1 year
Manufacturing Technician Manufacturing 8
Manufacturing Process Control And Capital Goods &
19 1 year
Automation Manufacturing 8
Chemicals &
20 Plastic Processing Operator 1 Year
Petrochemicals 9
21 Carpenter 1 Year Construction 10
22 Domestic Painter 1 Year Construction 11

37
Engineering Drawing (ED) under CTS Annexure - A

23 Industrial Painter 1 Year Construction 11

24 Mechanic Auto Body Painting 1 Year Automotive 11
25 Mason (Building Constructor) 1 Year Construction 12
26 Solar Technician (Electrical) 1 Year Environmental Science 13
27 Warehouse Technician 1 Year Logistics 14
28 In Plant Logistics Assistant 1 Year Logistics 14
29 Stone Mining Machine Operator 1 Year Mining 15
30 Stone Processing Machine Operator 1 Year Mining 15
31 Plumber 1 Year Plumbing 16
32 Rubber Technician 1 Year Rubber Industry 17

38
Engineering Drawing (ED) under CTS Annexure - A

CTS 2 Year Engineering Trade

Sl. No. Trade Duration Sector Group

Mechanic Agricultural
1 2 Years Automotive
Machinery 18
2 Mechanic Motor Vehicle 2 Years Automotive 18
3 Mechanic Electric Vehicle 2 year Automotive 18
Aeronautical Structure and Capital Goods &
4 2 Years
Equipment Fitter Manufacturing 19
Central Air condition Plant Capital Goods &
5 2 Years
Mechanic Manufacturing 20
Capital Goods &
6 2 Years
Manufacturing 19
Capital Goods &
7 Machinist 2 Years
Manufacturing 19
Capital Goods &
8 Machinist Grinder 2 Years
Manufacturing 19
Capital Goods &
9 Marine fitter 2 Years
Manufacturing 21
Mechanic Machine Tool Capital Goods &
10 2 Years
Maintenance Manufacturing 19
Mechanic Mining Capital Goods &
11 2 Years
Machinery Manufacturing 19
Operator Advanced Capital Goods &
12 2 Years
Machine Tool Manufacturing 19
Capital Goods &
13 Refractory Technician 2 Years
Manufacturing 22
Refrigeration & Air Capital Goods &
14 2 Years
Conditioning Technician Manufacturing 20
Capital Goods &
15 Technician Mechatronics 2 Years
Manufacturing 19
Capital Goods &
16 Textile Mechatronics 2 Years
Manufacturing 19
Tool & Die Maker (Dies & Capital Goods &
17 2 Years
Moulds) Manufacturing 19
Tool & Die Maker (Press, Capital Goods &
18 2 Years
Tools, Jigs & fixtures) Manufacturing 19
Capital Goods &
19 Turner 2 Years
Manufacturing 19

39
Engineering Drawing (ED) under CTS Annexure - A

Capital Goods &

20 Vessel Navigator 2 Years
Manufacturing 23
Basic Designer and Virtual Capital Goods &
21 2 year
Verifier (Mechanical) Manufacturing 19
Capital Goods &
22 Advanced CNC Machining 2 year
Manufacturing 19
Attendant Operator Chemicals &
23 2 Years
(Chemical Plant) Petrochemicals 24
Chemicals &
24 Electroplater 2 Years
Petrochemicals 28
Instrument Mechanic Chemicals &
25 2 Years
(Chemical Plant) Petrochemicals 24
Laboratory Assistant Chemicals &
26 2 Years
(Chemical Plant) Petrochemicals 24
Maintenance Mechanic Chemicals &
27 2 Years
(Chemical Plant) Petrochemicals 24
28 Painter (General) 2 Years Construction 25
29 Electronics Mechanic 2 Years Electronics & Hardware 26
30 Instrument Mechanic 2 Years Electronics & Hardware 26
Mechanic Consumer
31 2 Years Electronics & Hardware
Electronic Appliances 26
Technician Medical
32 2 Years Electronics & Hardware
Electronics 26
Technician Power
33 2 Years Electronics & Hardware
Electronics System 26
Technician Electronics System
34 2 Years Electronics & Hardware 26
Design & Repair
Information and
35 Communication Technology 2 Years IT & ITeS
System Maintenance 27
36 Information Technology 2 Years IT & ITeS 27
37 Electrician 2 Years Power 28
Electrician - Power
38 2 Years Power
Distribution 28
39 Lift and Escalator Mechanic 2 Years Power 28
40 Wireman 2 Years Power 28
41 Spinning Technician 2 Years Textile & Handloom 29
Textile Wet Processing
42 2 Years Textile & Handloom
Technician 29
43 Weaving Technician 2 Years Textile & Handloom 29

40
Engineering Drawing (ED) under CTS Annexure - A

List of Draughtsman group Trades

Sl.
Trade Duration Sector Group
No.
Additive
Manufacturing Capital Goods &
1 1 Year D'man
Technician (3D Manufacturing
Printing)
Capital Goods &
2 D'man Mechanical 2 Years D'man
Manufacturing
Architectural
3 2 Years Construction D'man
Draughtsman
Civil Engineer
4 2 Years Construction D'man
Assistant

5 2 Years Construction D'man

D'man Civil
Interior Design &
6 1 Year Construction D'man
Decoration

7 Surveyor 2 Years Construction D'man

List of Visually Impaired (Divyang) group of Trade

Metal Cutting
Capital Goods & Engg.
1 Attendant (for 2 Years
Manufacturing (VI)
Visually Impaired)

41