d

ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 01 (Part I)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
Module Module name Lecture Content

is . V
m of
er Pr
Bioconversion of Bioconversion of substrates into alcohol

r p er
06 substrates into 01 (Part I) Basic principles of bioconversion

rio nd
tp du
alcohol and Thermo-

ou te
chemical conversion

ith h
w yrig
of biomass to solid,

ed op
liquid and gaseous

us is c
fuels
be al
ot eri
nn at
ca m
It is
Th
Bioconversion of substrates into alcohol (Ethanol production)

d
ou
. G
on V
Ethanol production is based on two major techniques

si .
is . V
m of
er Pr
a. Chemical synthesis:

r p er
Acid-catalyzed hydration of ethylene forms ethanol which is referred to as a chemical process.

rio nd
tp du
Phosphoric acid is the most commonly used catalyst in the chemical process (Baeyens et al., 2015).

ou te
ith h
w yrig
b. Fermentation:

ed op
Production of ethanol through fermentation process by using different microbial strains is called as

us is c
biological process. Under anaerobic conditions, certain species of yeast (e.g., Saccharomyces
be al
ot eri

cerevisiae) and bacteria (e.g. Zymomonas mobilis) metabolizes the sugars into ethanol and carbon
nn at

dioxide (Zabed et al., 2017)

ca m
It is
Th

Zabed, H. et al. (2017). Renewable and Sustainable Energy Reviews. Elsevier Ltd, pp. 475–501. doi: 10.1016/j.rser.2016.12.076.
Baeyens, J. et al. (2015). Progress in Energy and Combustion Science. Elsevier Ltd, 47, pp. 60–88. doi: 10.1016/j.pecs.2014.10.003.
Comparison of Biochemical and Thermochemical Routes for Biomass Conversion into

d
Ethanol

ou
. G
on V
Process Biochemical Route Thermochemical Route

si .
is . V
(Sugar Fermentation)

m of
er Pr
Feedstock Sugarcane/Starch/Corn Cellulosic Stock/Wood/MSW

r p er
rio nd
Reactor Type Batch Continuous

tp du
ou te
Reaction Time Days Minutes

ith h
w yrig
Water Usage 3.5 – 170 L/L ethanol < 1 L/L ethanol

ed op
By-products Distiller’s dried grain Syngas/Electricity

us is c ~ 265 – 492 L/ton

be al
Yield* ~ 400 L/ton
ot eri
nn at

Technology Maturity > 100 plants in the United States Pilot Plant
ca m
It is
Th

The fermentation of syngas from biomass gasification is another possible route for ethanol
production from woody biomass.
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
• Saccharomyces cerevisiae, is poisoned by C2H5OH concentrator greater than 10%, and so higher

d
ou
concentrations upto 95% are produced by distilling and fractionating.

. G
on V
si .
is . V
m of
• Production of bioethanol from sugars like Sucrose, Glucose, and Fructose is an industrially well-

er Pr
established process and it is found to be a safest and eco-friendly process as well (Vohra et al., 2014).

r p er
rio nd
tp du
ou te
•

ith h
However, the first usage of ethanol blended gasoline as a fuel occurred in the 1920s and 1930s and was in

w yrig
high demand during World War II because of fuel shortages.

ed op
us is c
be al
ot eri

• Several renewable resources like rice, wheat, corn, sorghum grains, sugarcane, cassava, and sugar
nn at
ca m

beet are generally used for the production of bioethanol.

It is
Th

Vohra, M. et al. (2014). Journal of Environmental Chemical Engineering. 2(1), pp. 573–584. doi: 10.1016/j.jece.2013.10.013.
Bioethanol production from edible sources

d
ou
G
• Sugarcane and sugar beet containing

.
on V
si .
is . V
sucrose is much easier to extract, therefore,

m of
the production cost of ethanol from sugarcane

er Pr
and sugar beet is lower than that of rice,

r p er
rio nd
wheat, corn, sorghum grains, and cassava

tp du
derived ethanol

ou te
ith h
w yrig
•

ed op
Because it does not require hydrothermal

us is c
treatment (domestically known as cooking)
be al
and subsequent enzymatic hydrolysis for the
ot eri

gelatinization of starch and it’s conversion

nn at
ca m

into sugars, respectively

It is

Bioethanol production from (a) sugar crops and (b) starchy

Th

materials

Naik, S. N. et al. (2010). Renewable and Sustainable Energy Reviews, 14(2), pp. 578–597. doi: 10.1016/j.rser.2009.10.003.
 d
ou
• But, production of bioethanol from edible sources like rice, wheat, corn, sorghum grains, sugarcane and its

G
usage in the transportation sector can impose food insecurity to the world population.

.
on V
si .
is . V
m of
• Due to the high demand of ethanol as a fuel in the transportation sectors may eventually increases the prices of

er Pr
r p er
the aforementioned edible feedstocks.

rio nd
tp du
ou te
• Therefore, the interest of modern research has been switched to non-food based ethanol (second generation

ith h
w yrig
biofuels) (Naik et al., 2010).

ed op
us is c
• Among many widely available feedstock, inedible agriculture residues such as wheat straw, corn stover,
be al
ot eri

sorghum stalks, rice straw, sugarcane bagasse are the potential and promising feedstocks for the
nn at
ca m

bioethanol production.
It is
Th

Naik, S. N. et al. (2010). Renewable and Sustainable Energy Reviews, 14(2), pp. 578–597. doi: 10.1016/j.rser.2009.10.003.
 The amount of major agricultural crops residues burned in the year 2016 and their CO 2 emissions

d
ou
. G
on V
Million

si .
is . V
Agriculture crop residues (Million dry ton/year)

m of
ton/year

er Pr
r p er
Country Corn Rice Wheat Sugarcane CO2 emission

rio nd
tp du
USA 35.11 0.07 7.10 0.24 3.73

ou te
ith h
India 10.20 23.63 12.09 3.22 4.25

w yrig
ed op
China 38.98 16.75 9.74 1.09 5.75

Brazil 14.96us is c 1.07 0.87 6.65 2.03

be al
ot eri
nn at
ca m

Due to the structural rigidity, bioethanol production from lignocellulosic biomass is difficult than that of
It is
Th

sucrose (sugarcane) and starch-containing materials (corn, wheat, rice, sorghum grains, and cassava).
Several processes are investigated for the efficient hydrolysis of lignocellulosic biomass for the production of

d
ou
fermentable sugars and their conversion into bioethanol. Among them, pretreatment and subsequent enzymatic

. G
hydrolysis of lignocellulosic biomass are found to be more efficient and most widely used process

on V
si .
is . V
m of
er Pr
Several pretreatment techniques such as

r p er
• steam explosion,

rio nd
tp du
• ionic liquid,

ou te
• dilute acid,

ith h
w yrig
• biological,

ed op
us is c
• hydrothermal, be al
• organo-solvent,
ot eri

• concentrated acid and alkali

nn at
ca m
It is
Th

Conversion of Lignocellulosic biomass into bioethanol

 d
Ethanol is produced by the action of microorganisms on carbohydrates (alcoholic fermentation).

ou
G
Carbohydrates (saccharides) can be divided into three major classes in order of increasing complexity.

.
on V
si .
is . V
Monosaccharides (simple hydrocarbons, which cannot be hydrolyzed into simpler compounds),

m of
er Pr
glucose and fructose.

r p er
rio nd
• More precisely, glucose and fructose can be represented by the formulae HCO-(HCOH)4,-CH2OH

tp du
and CH2OH-CO-(HCOH)3-CH2OH, respectively.

ou te
ith h
w yrig
ed op
Oligosaccharides (Yield few but definite numbers (2-10) of monosaccharide molecules on hydrolysis).

us is c
• For example, a disaccharide (such as sucrose and malltose, both having the formula (C12H23O11)
be al
ot eri

produces two monosaccharide molecules on hydrolysis.

nn at

• Sucrose (common sugar) occurs naturally in sugarcane and beetroot. Maltose (malt sugar) is derived
ca m
It is
Th

from starch.

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
 d
ou
Polysaccharides (high-molecular mass carbohydrates, which yield a large number of monosaccharide

G
molecules on hydrolysis).

.
on V
si .
is . V
m of
er Pr
• Examples are starch and cellulose; both having the general formula (C6H10O5)n. Large numbers (few

r p er
hundreds to few thousands) of glucose units are joined together in a complex chain.

rio nd
tp du
• Starch occurs naturally in all plants, particularly in seeds. The main sources are maize, barley, rice,

ou te
ith h
wheat, potato, cassava and sorghum.

w yrig
• Cellulose is the main constituent of cell walls of the plants. Wood contains 45-50% while cotton

ed op
us is c
contains 90-95% cellulose. be al
ot eri
nn at
ca m
It is
Th

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
 The hexose (glucose and/or fructose) required for ethanol fermentation is derived from (i) sucrose,

d
ou
(ii) starch; or (iii) cellulose as explained below.

. G
on V
si .
is . V
i. Sucrose:

m of
er Pr
• Sucrose is the most common disaccharide and can be produced from sugarcane or beetroot.

r p er
•

rio nd
Usually, commercial sucrose is separated from cane juice, and the remaining molasses; which has low

tp du
commercial value, is used for ethanol production.

ou te
ith h
• The molasses itself has about 55% sugar content and serves as very good raw material for ethanol

w yrig
ed op
production.

us is c
• On hydrolysis with dilute acids or enzymes, it gives equal amounts of glucose and fructose.
be al
ot eri

C12 H 22O11 ( Sucrose ) 

hydrolysis
 C6 H12O6 ( Glucos e )  C6 H12O6 ( Fructose )
nn at
ca m
It is

• Sucrose are readily available in a fermentable form, require least expansive preparation, but are generally
Th

most expensive to obtain.

ii. Starch:

d
•

ou
On hydrolysis with dilute H2SO4 or enzymes, Starch breaks down to maltose and finally to glucose.

. G
on V
2 ( C 6 H 10O5 )n  n H 2O  n C12 H 22O11  n H 2O  2n C 6 H 12O6

si .
is . V
( starch ) ( Maltose ) ( Glu cos e )

m of
er Pr
r p er
Starch bearing materials are often cheaper, but require processing to solubilise and convert starch to sugars.

rio nd
tp du
ou te
iii. Cellulose

ith h
w yrig
• Cellulose is not hydrolyzed so easily as starch, but on heating with dilute sulphuric acid under pressure

ed op
us is c
yields glucose.
( C 6 H 10O5 )n  n H 2O  n C 6 H 12O6
be al
ot eri

( Cellulose ) ( Glu cos e )

nn at
ca m
It is

Cellulosic materials are readily available organic compound, but require most expensive and costly
Th

preparation. Finally, ethanol is obtained from fermentation of hexose sugars.

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
 d
Several pretreatment techniques such as

ou
G
• steam explosion,

.
on V
si .
• ionic liquid,

is . V
m of
• dilute acid,

er Pr
r p er
• biological,

rio nd
• hydrothermal,

tp du
ou te
• organo-solvent,

ith h
w yrig
• concentrated acid and alkali

ed op
us is c
be al
ot eri
nn at
ca m
It is
Th

lignocellulosic biomass conversion into bioethanol

Naik, S. N. et al. (2010). Renewable and Sustainable Energy Reviews, 14(2), pp. 578–597. doi: 10.1016/j.rser.2009.10.003.
Fermentation Systems (Cellulosic material)

d
ou
G
The conversion of cellulose, starch and sugars to ethanol (C2H5OH):

.
on V
si .
is . V
m of
(C6H10O5)n + n H2O → n C6H12O6

er Pr
(Cellulose) (Glucose)

r p er
rio nd
tp du
C12H22O11 + H2O → 2C6H12O6 Thermal properties of ethanol

ou te
ith h
glucose

w yrig
Parameters Temperature (°C)

ed op
C6H12O6 → 2C2H5OH + 2CO2
us is c
Boiling point 78.22
ethanol
be al
Flash point 16.45
ot eri
nn at
ca m

Auto-ignition temperature 424.85

It is
Th

Heat of combustion 26800 kJ/kg

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
Ethanol production from various types of biomass

d
ou
G
Various steps involved in the production of ethanol from the three types of biomass resources are shown

.
on V
in the following schematic

si .
is . V
m of
Natural sugars
Process heat, by

er Pr
(cane, beet, fruit) Crush Residue
products

r p er
rio nd
tp du
ou te
Starches Hydrolysis

ith h
(Grains: barley, maiz (easy) Sugars Yeast fermentation 10% ethanol

w yrig
roots: cassava)

ed op
us is c
Fractional 95% ethanol
distillation Commercial ethanol
be al
Cellulose Hydrolysis
Petroleum substitute
ot eri

(wood, straw) (difficult)

nn at
ca m

Azeotropic
distillation
It is

99.7% ethanol
Th

anhydrous ethanol
Petroleum additive

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
Steps involved in ethanol production from edible sources

d
ou
Water

G
95% ethanol

.
on V
Commercial ethanol

si .
is . V
Sugar, Corn Petroleum substitute

m of
Feedstock

er Pr
Ethanol
Sugar

r p er
Fermented

Distillation Column
rio nd
Yeast to Aqs.

tp du
Alcohol

ou te
ith h
w yrig
ed op
us is c
Aqueous
Alcohol
be al
ot eri
nn at
ca m
It is
Th

Residues Animal Feed

Steps involved in ethanol production from cellulosic materials

d
ou
Acid and Water Enzymes and Water

. G
Cellulosic Hemicellulose

on V
Syrup for

si .
Feedstock

is . V
Pentose
Acids Break
Fermentation

m of
Biomass

er Pr
into Base Cellulosic
Sugars and

r p er
Fibers
Ethanol

rio nd

Distillation Column
tp du
Cellulose and Lignin Fibers

ou te
ith h
Cellulose

w yrig
Enzymes Solids for
and Hydrolysis and

ed op
Ethanol
Water
us is c
be al Fermentation
ot eri

Aqs. Alcohol
nn at
ca m

Boiler to
It is

Lignin Generate Steam

Th

for Process
• Pruvate serves as a key branching point in fermentations.

d
ou
• In an ethanolic type of fermentation, pyruvate is metabolized to acetaldehyde and carbon dioxide, and acetaldehyde

. G
on V
is then reduced to ethanol

si .
is . V
• Thus, in this process, it is theoretically possible to achieve 2 moles of ethanol for each mole of glucose converted, or

m of
er Pr
on a weight basis, a 51 % conversion of glucose into ethanol.

r p er
•

rio nd
In practice only 90-95% of the theoretical amount of ethanol is produced as some of the pyruvate is consumed for

tp du
cellular material during culture growth and is not available to serve as an electron acceptor.

ou te
•

ith h
Also, low levels of higher alcohols are produced as metabolic waste products.

w yrig
ed op
Type of fermentation End products Microorganisms

us is c
Ethanolic Ethanol, Carbon dioxide
be al Yeast
Mixed acid Lactic acid, Formic acid, Acetic acid Zymomonas
ot eri
nn at

Carbon dioxide, Hydrogen, Ethanol Clostridium and many

ca m

enteric bacteria
It is
Th

Butanediol As in mixed acid and 2,3-butanediol Bacillus and other

bacteria
Theoretical ethanol yield

d
ou
G
C6H12O6  2C2H5OH  2CO2

.
on V
si .
is . V
m of
3C5H10O5  5C2H5OH  5CO2

er Pr
r p er
rio nd
TEY (kg / ton)  CS (kg / ton)  0.51 kg ethanol

tp du
ou te
ith h
w yrig
Mass (kg)
V (L/ton) =

ed op
 (kg/L)

us is c
be al
ot eri

Where, TEY represents the theoretical ethanol yield, Cs is the concentration of sugars (C6 or C5) present in
nn at

the lignocellulosic biomass, 0.51 is theoretical ethanol yield (gp/gs) constant, V, volume (L); and ρ, is ethanol
ca m
It is

density (0.789 kg/L at 20 ºC).

Th

20
Theoretical bioethanol potential analysis

d
ou
. G
on V
si .
is . V
LCB Structural

m of
TEY (kg/Ton) TEY (L/Ton)

er Pr
Carbohydrate (kg/Ton)

r p er
rio nd
Rice straw 599 305.5 387

tp du
ou te
Wheat straw 616 314 398

ith h
w yrig
ed op
Sugarcane bagasse 599 305.5 387

us is c
be al
Corn Stover 596 304 385
ot eri
nn at
ca m
It is
Th
 d
ou
G
Liquid fuel characteristics of alcohols, diesel and gasoline

.
on V
si .
is . V
m of
er Pr
r p er
Characteristic Gasoline Diesel Methanol Ethanol Butanol

rio nd
tp du
ou te
Boiling point °C 32-210 204-343 65 78 118

ith h
w yrig
Lower heating

ed op
us is c
Value (MJ/kg) 44.5
be al 43 19.6 26.9 33.1
MJ/lit. 31.9 38.9 15.4 21.1 26.7
ot eri
nn at
ca m
It is
Th

Non conventional energy resources, by Rai, 4th edition, 2010, Khanna Publisher
Uses of Ethanol

d
ou
G
• Hydrous ethanol (95% by volume) or commercial ethanol is used as fuel in specially designed IC engines

.
on V
si .
is . V
with 25% mileage penalty compared to conventional vehicles.

m of
er Pr
• Up to 22% blend of anhydrous ethanol (99.7% by volume) with petrol require no engine modification and

r p er
incurring no mileage penalty and is being used by a large number of automobiles in the world.

rio nd
tp du
• Anhydrous ethanol is required for the purpose of blending of petrol.

ou te
ith h
• The ethanol additive has antiknock properties and is preferred to the more commonly used tetraethyl lead,

w yrig
which produces serious air pollution.

ed op
us is c
• The excellent combustion properties of ethanol enables an engine to produce up to 20% more power as
be al
compared to that of petrol.
ot eri
nn at
ca m
It is
Th

* Courtesy: Non-conventional energy resources, by B H Khan, 2nd edition, 2009, Publisher, TMH
 d
(Overview of next lecture)

ou
. G
on V
si .
is . V
Module 06

m of
(Bioconversion of substrates into alcohol and Thermo-

er Pr
chemical conversion of biomass to solid, liquid and gaseous

r p er
rio nd
fuels)

tp du
Lecture 01 (Part II)

ou te
ith h
w yrig
Content Thermo Chemical Conversion of Biomass to Solid, Liquid and

ed op
Gaseous Fuels

us is c
be al
Thank you
ot eri
nn at
ca m

For queries, feel free to contact at : [email protected]

It is
Th
 d
ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 01 (Part II)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
is . V
m of
Module Module name Lecture Content

er Pr
r p er
rio nd
Bioconversion of Thermo Chemical Conversion of Biomass to

tp du
06 substrates into 01 (Part II) Solid, Liquid and Gaseous Fuels

ou te
alcohol and

ith h
w yrig
Thermo-chemical

ed op
conversion of

us is c
biomass to solid,
be al
liquid and gaseous
ot eri
nn at

fuels
ca m
It is
Th
Thermo chemical conversion of biomass, conversion to

d
solid, liquid and gaseous fuels

ou
. G
on V
• Number of technological options available to make use of a wide variety of biomass types as a

si .
is . V
renewable energy source.

m of
er Pr
• Conversion technologies may release the energy directly, in the form of heat or electricity, or may

r p er
rio nd
convert it to another form, such as liquid biofuel or combustible gas (producer gas or bio-gas).

tp du
• Depending on its source, these processes include: combustion, pyrolysis, gasification, and

ou te
ith h
w yrig
liquefaction.

ed op
us is c
• Thermo-chemical processes convert biomass into higher-value or more convenient products.
be al
ot eri

 The process releases a gas (~6 MJ/kg), a liquid (~17-22 MJ/kg) and/or a char (~18MJ/kg), and
nn at
ca m

depending on the technology one of these is the final product.

It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
 In thermo chemical processes heat is the dominant mechanism to convert the biomass into another chemical

d
ou
form.

G
 The basic alternatives are separated principally by the extent to which the chemical reactions involved are

.
on V
si .
allowed to proceed:

is . V
 Thermochemical conversion usually represents such concepts as

m of
Thermal

er Pr
conversion

r p er
rio nd
• Combustion Excess air Partial air No air

tp du
• Gasification

ou te
ith h
• Pyrolysis, and

w yrig
Pyrolysis &
• Liquefaction Combustion

ed op
Gasification Hydrothermal

us is c
be al liquefaction

Heat
ot eri

All of which involve the high-temperature

nn at

(and occasionally high-pressure) processing of biomass Fuel Gases Liquids

ca m

(CO + H2)
It is
Th

Starting with a general lignocellulosic biomass of composition (CH20)n, schematic presents alternative
thermochemical processing routes
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Thermo chemical conversion processes

d
ou
G
The following schematic represents the thermochemical conversion of biomass to other, more useful

.
on V
si .
products.

is . V
m of
er Pr
 Thermal conversion technologies are robust, and they efficiently convert a wide range of biomass

r p er
rio nd
feedstocks

tp du
ou te
 Addresses seasonal and regional variability issues

ith h
w yrig
 Utilizes the entire biomass feedstock

ed op
us is c
 Thermal conversion provides range of fuel opportunities
be al
ot eri

 Ethanol, mixed alcohols, oxygenates

nn at
ca m

 Hydrocarbons including gasoline, diesel.

It is
Th
 Drying
Combustion Steam Generation

d
T>700°C Heat Process Heat

ou
Excess oxygen Power

. G
on V
Oxidant

si .
H2, CO

is . V
Low or intermediate Btu gas
Gasification

m of
Fuel or Additional CH4
Catalytic (500-750ºC)

er Pr
Non-catalytic (up to synthetic gas processing* CH3OH

r p er
900ºC)
NH3

rio nd
Steam
Steam

tp du
Pretreatment
Drying FT products
(CH2O)n

ou te
Size reduction
Densification

ith h
Gas** Combustion

w yrig
ed op
Liquid Catalytic Fuels &
Pyrolysis (300-700ºC)

us is c
Upgrading Chemicals
be al
Char Solid fuel, Sorbent &
ot eri

Soil enhancer
CO2
nn at
ca m
It is

Liquefaction (200- * - Only intermediate-Btu gas is typically processed

CH2O0.3
Th

400ºC) **- H2, CO,CO2,H2O,CH4,C2H4,C3H6

CO
FT- Fischer Trposch

Thermo chemical conversion processes

A brief description of reactions that take place in different thermal conversion processes of biomass are as

d
follows

ou
. G
1. Torrefaction:

on V
si .
is . V
It is a process of production of carbon-rich solid fuels from biomass. So, gas and liquid parts of the

m of
conversion do not form a part of the product. Torrefaction has some similarity with the process of

er Pr
r p er
carbonization, but there are some important differences as mentioned below.

rio nd
tp du
𝐶𝑛 𝐻𝑚 𝑂𝑝 + heat → Char + CO + CO2 + H2 O + condensable vapors

ou te
ith h
Torrefaction Carbonization

w yrig
Torrefaction retains most of it, driving away only the Carbonization drives away most of the volatiles

ed op
early volatilized low energy dense compounds &

us is c
chemically bound moistures be al
The torrefaction process on the other hand tries to avoid Carbonization takes place at higher temperatures with a certain
ot eri

oxygen as well as combustion level of oxygen that allows sufficient combustion to supply the
nn at

heat for the process

ca m
It is

Torrefaction is a thermal decomposition that takes place • Carbonization is a high temperature (300 to 600 C)
Th

at low temperature & within a narrow temperature range destructive distillation process
of 200 to 300 C • Carbonization produces more energy dense fuel than
torrefaction, but it has a much lower energy yield
A brief description of reactions that take place in different thermal conversion processes of biomass are as
follows

d
ou
G
2. Pyrolysis:

.
on V
si .
is . V
In pyrolysis, heavier hydrocarbon molecules of biomass are broken down into smaller hydrocarbon

m of
molecules, non condensable gases like CO, CO2, and solid carbon as char.

er Pr
r p er
rio nd
𝐶𝑛 𝐻𝑚 𝑂𝑝 + heat → ෍ 𝐶𝑎 𝐻𝑏 𝑂𝑐 + ෍ 𝐶𝑥 𝐻𝑦 𝑂𝑧 + ෍ 𝐶

tp du
𝑙𝑖𝑞𝑢𝑖𝑑 𝑔𝑎𝑠 𝑠𝑜𝑙𝑖𝑑

ou te
ith h
3. Combustion:

w yrig
To explain the conversion process, consider the carbon as the feedstock and write the chemical reaction of

ed op
the process as:

us is c
𝐶 + O2 → CO2 − 393.77 𝑘 𝐽Τ𝑚 𝑜𝑙 of 𝑐𝑎𝑟𝑏𝑜𝑛
be al
ot eri

The positive sign on the right side (+ Q kJ/kmol) of the reaction equations implies that heat is absorbed in
nn at

the reaction. A negative sign ( - Q kJ/kmol) means that heat is released in the reaction.
ca m
It is
Th

When 1 mol of carbon is burnt completely in adequate air or oxygen, it produces ~ 394 KJ heat and CO2

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
4. Gasification of carbon:

d
ou
In restricted oxygen supply, carbon can be gasified into carbon monoxide. The carbon then produces 72%

G
less heat than it would have in complete combustion, but the partial gasification reaction as shown below

.
on V
produces a combustible gas, CO

si .
is . V
1
𝐶+ O2 → CO − 110.53 M 𝐽Τ𝑚 𝑜𝑙 of 𝑐𝑎𝑟𝑏𝑜𝑛

m of
2

er Pr
r p er
The product of above reaction (gasification), CO, when burnt subsequently in adequate oxygen, then it

rio nd
releases the remaining 72% (283 MJ) of the heat. Thus, the CO retains only 72% of the energy of the

tp du
carbon.

ou te
ith h
w yrig
Apart from that, for complete gasification of a biomass the energy recovery is 75 to 88% due to the

ed op
presence of hydrogen and other hydrocarbons.

us is c
be al
The producer gas reaction is an example of gasification reaction, which produces H2 and CO from
ot eri
nn at

carbon. This product gas mixture is also known as synthesis gas or syngas.
ca m
It is

𝐶 + H2 O → CO + H2 + 131.00 𝑀 𝐽Τ𝑘 𝑚𝑜𝑙

Th
5. Liquefaction

d
ou
G
Liquefaction of solid biomass into liquid fuel can be done through pyrolysis, gasification, and through

.
on V
si .
hydrothermal process.

is . V
m of
In the latter process, biomass is converted into an oily liquid by contacting the biomass with water at

er Pr
elevated temperatures (300 – 350 C) and high pressure (12 – 20 MPa) for a period of time. There are

r p er
rio nd
several other means including the supercritical water process for direct liquefaction of biomass.

tp du
ou te
Pyrolysis:

ith h
w yrig
A pyrolysis process produces pyrolytic oil and gas. When the emphasis is on an oil rather than a gas

ed op
yield, the process may be termed a liquefaction process.

us is c
be al
• Pyrolysis liquids can be sued directly as heating oil.
ot eri

• They have high water content

nn at
ca m

• The low pH of pyrolysis liquids make the liquid highly corrosive

It is
Th

• The HHV value of a pyrolysis liquid ranges from 17 to 20 MJ/kg.

Liquefaction through gasification:
It involves the production of methanol from mixture of H2 and CO (producer gas). The reaction

d
ou
takes place at 330o C and 150 atm.

. G
on V
si .
is . V
2𝐻2 + CO → CH3 𝑂𝐻

m of
• The H2 and CO required for the process can be produced by gasifying biomass.

er Pr
• CO2 and H2S present in produce gas re removed prior to methanol reactor.

r p er
rio nd
• Methanol yield from woody biomass expected to be in the range 480-568 liters/tons.

tp du
• Methanol can be used as liquid fuel in petrol engines with an energy density of 23 MJ/kg.

ou te
ith h
w yrig
Thermochemical conversion—hydrothermal liquefaction (HTL):

ed op
HTL is a unique thermal conversion process that utilizes biomass and water slurries. This makes HTL

us is c
particularly well suited for high water content material, such as algae, municipal solid wastes, or
be al
grasses into bio-based oils.
ot eri
nn at

• HTL bio-oils tend to be higher quality than pyrolysis oils

ca m

• HTL oils have less oxygen.

It is
Th

• But the oil yields for HTL are lower than pyrolysis and
• Oxygen content is still higher than crude oil.
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Comparison of some major thermochemical conversion processes

d
ou
. G
on V
si .
is . V
Process Temperature (°C) Pressure (MPa) Catalyst Drying

m of
250 – 330 5 – 20

er Pr
Liquefaction Essential Not required

r p er
300 – 600 0.1 – 0.5

rio nd
Pyrolysis Not required Necessary

tp du
Combustion 700 – 1400 ≥ 0.1 Not required Not essential, but may

ou te
ith h
w yrig
help

ed op
Gasification 500 – 1300 ≥ 0.1 Not required Necessary

200 – 300 us is c
be al
Torrefaction 0.1 Not required Necessary
ot eri
nn at
ca m
It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
 d
(Overview of next lecture)

ou
. G
on V
si .
is . V
Module 06

m of
(Bioconversion of substrates into alcohol and Thermo-

er Pr
chemical conversion of biomass to solid, liquid and gaseous

r p er
rio nd
fuels)

tp du
Lecture 02 (Part I)

ou te
ith h
w yrig
Content Thermo-chemical conversion processes combustion,

ed op
gasification, pyrolysis, chemical conversion processes

us is c
be al
Thank you
ot eri
nn at
ca m

For queries, feel free to contact at : [email protected]

It is
Th
 d
ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 02 (Part I)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
is . V
m of
Module Module name Lecture Content

er Pr
r p er
rio nd
Bioconversion of Thermo-chemical conversion processes

tp du
06 substrates into 02 (Part I) combustion, gasification, pyrolysis, chemical

ou te
alcohol and Thermo- conversion processes

ith h
w yrig
chemical conversion

ed op
of biomass to solid,

us is c
liquid and gaseous
be al
fuels
ot eri
nn at
ca m
It is
Th
Torrefaction:

d
ou
G
Torrefaction is a thermochemical process carried out in an inert or limited oxygen environment. In this process

.
on V
si .
is . V
biomass is slowly heated to within a specified temperature range and retained there for a stipulated time such

m of
that it results in near complete degradation of its hemicellulose content while maximizing mass and energy

er Pr
r p er
yield of the solid product.

rio nd
tp du
ou te
• Typical temperature range for this process is between 200 oC and 300 oC.

ith h
w yrig
• Temperature above this would result in extensive devolatilization and carbonization of the polymers both

ed op
us is c
of which are undesirable for torrefaction.
be al
• Also, the loss of lignin in biomass is very high above 300 oC. This loss could make it difficult to form
ot eri
nn at

pellets from torrefied products.

ca m

• Moreover, fast thermal cracking of cellulose causing tar formation starts at temperature 300 – 320 oC.
It is
Th

• Thus, upper limit of torrefaction temperature fixed as 300 oC.

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Difference between carbonization, pyrolysis, and torrefaction

d
ou
The most important difference between pyrolysis, carbonization, and torrefaction lies in their product motivation

. G
on V
Torrefaction Carbonization Pyrolysis

si .
is . V
Maximize energy and mass yields with Maximize FC and minimize HC content Maximize its liquid production

m of
er Pr
reduction in (O/C) and of the solid product
(H/C) ratios

r p er
rio nd
Torrefaction retains most of it, driving Carbonization Complete devolatilization

tp du
away only the early volatilized low drives away most of the volatiles

ou te
energy dense compounds and

ith h
w yrig
chemically bound moistures

ed op
Torrefaction require relatively slow Carbonization require relatively slow Pyrolysis relies on fast pace of heating

us is c
rates of heating rates of heating
be al to maximize the liquid yield
The torrefaction process tries to avoid Carbonization takes place at higher Pyrolysis takes place at higher
ot eri

oxygen as well as combustion temperatures with a certain level of temperature and utilizes partial oxygen
nn at

oxygen to provide the thermal energy needed

ca m

for this process

It is

Narrow temperature range of 200 – 300 High temperature (> 300 – 600 oC) Thermally decomposes sample by
Th

oC destructive distillation process heating above 300-400 oC

Carbonization produces more energy dense fuel than torrefaction, but it has a much lower energy yield
Degree of Torrefaction

d
ou
The degree of torrefaction depends on the reaction temperature as well as on the time the biomass is subjected

G
to torrefaction

.
on V
si .
is . V
1. Light torrefaction: Occurs at a temperature of 200-240 oC or at 230 oC, when only hemicellulose is

m of
er Pr
degraded leaving lignin and cellulose unaffected.

r p er
2. Medium torrefaction: Occurs at a temperature of 240-260 oC or at about 250 oC, when cellulose is

rio nd
mildly affected.

tp du
ou te
3. Severe torrefaction: Occurs at a temperature of 260-300 oC or at 275 oC characterized by

ith h
w yrig
depolymerization of lignin, cellulose, as well as hemicellulose.

ed op
us is c
Solid
Liquid
be al Gas
Torrefaction
ot eri

products Water Original and H2, CO, CO2,

nn at

Organics modified sugar CH4, CxHy,

ca m

Lipids structure, toluene and

It is

New polymeric benzene

Th

structure,
Ash, char
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Combustion

d
ou
G
What is Combustion?

.
on V
si .
is . V
• Oxygen of air reacts with the combustible substances (fuel) resulting in the formation of

m of
er Pr
CO2 and H2O with release of heat,

r p er
rio nd
tp du
𝐶 + 𝑂2 ⇔ 𝐶𝑂2 + 393.77 𝑘 𝐽Τ𝑚 𝑜𝑙 𝑐𝑎𝑟𝑏𝑜𝑛

ou te
ith h
w yrig
• The other combustion reaction is the oxidation of hydrogen in fuel to produce steam

ed op
1
us is c
H2 + 𝑂2 ⇔ 𝐻2 O + 742 𝑘 𝐽Τ𝑚 𝑜𝑙 H2
2
be al
ot eri
nn at
ca m

 Complete oxidation of the fuel takes place with release of heat

It is
Th

 Air requirement is more than stoichiometric amount

Combustion of Biomass

d
ou
Chemically, combustion is an exothermic reaction between oxygen and hydrocarbon in biomass.

. G
on V
si .
is . V
m of
er Pr
𝑝ℎ𝑜𝑡𝑜𝑠𝑦𝑛𝑡ℎ𝑒𝑠𝑖𝑠

r p er
x 𝐶𝑂2 + y H2 𝑂 + sun light C𝑥 (H2 O)𝑦 + x O2

rio nd
(𝑐𝑎𝑟𝑏𝑜𝑛 dioxide) (water) (radiant energy) (glucose) (oxygen)

tp du
ou te
Stored chemical energy

ith h
w yrig
ed op
us is c
Conversion of stored energy to thermal C𝑥2 O)𝑦
C𝑥 (H
energy, radiant, kinetic energy
be al
ot eri
nn at

combustion
x CO2 + y H2 O + 𝑯𝒆𝒂𝒕 C𝒙 𝑯𝟐 𝑶 𝒚 + x O𝟐 + Ignition temp.
ca m

(+ gases + Char + ash)

It is
Th
Direct combustion

d
ou
. G
on V
 In the past combustion of biomass has been widely used to generate heat.

si .
is . V
m of
– At present, it is making a comeback in many industrial applications including generation of

er Pr
r p er
electricity,

rio nd
tp du
 Straightforward conversion of thermal energy into mechanical or electric power results in

ou te
ith h
w yrig
considerable losses

ed op
us is c
– It is not possible to raise the ratio of thermal to mechanical power above 60%.
be al
– However, if the low temperature waste heat can be used productively, for instance for drying
ot eri
nn at
ca m

or heating purposes, much higher overall efficiencies can be obtained.

It is
Th

Courtesy: Biomass Conversion Processes for Energy and Fuels, by S. S. SOFER and O. R. ZABORSKY, 1981, PP, NY
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Direct combustion Heat

d
Energy

ou
Fuels and Combustion

. G
on V
Combustion Combustion

si .
is . V
Air and Fuel unit Products

m of
er Pr
Radiant

r p er
Energy
Fuel + Oxidizer → Products of Combustion + Energy

rio nd
tp du
Conductive heat
Biomass

ou te
to surrounding

ith h
Combustion

w yrig
Hot Flue gas
Flame front

ed op
us is c
Radiation
to surrounding
be al
ot eri

Volatile
matter
nn at

Radiation Entrained air

ca m

to wood
It is
Th

Conduction to wood
Burning char

Ash
Wood
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
 Direct combustion

d
ou
. G
on V
Air

si .
is . V
m of
er Pr
Volatile Flaming
Flue Gas

r p er
matter combustion Heat Conduction
Air

rio nd
tp du
Light Convection
Heat Radiation

ou te
to Fuel Glowing Infrared

ith h
Fuel Flue Gas Radiation

w yrig
combustion radiation

ed op
Heat Conduction to
Fuel

us is c
Heat Fixed carbon
be al
(char)
ot eri
nn at
ca m
It is

Air
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Combustion

d
ou
Properties of Fuels

. G
– Solid

on V
si .
is . V
 Density

m of
 Moisture content

er Pr
Flaming combustion Glowing combustion


r p er
Volatile matter and Fixed carbon

rio nd
 Sulfur

tp du
 Ash content

ou te
 Calorific value

ith h
w yrig
ed op
Fuel Volatile Matter Fixed Carbon Ash

us is c
Paddy Husk be al 63.3 14.0 22.7
Bagasse 74.0 19.3 6.7
ot eri
nn at

Wood 77 - 87 13 - 21 0.1 - 2.0

ca m

Lignite 43.0 46.6 10.4

It is
Th

Anthracite Coal 5.0 80 15

Combustion of biomass

d
ou
G.
Volatiles and fixed carbon

on V
si .
is . V
m of
 Volatiles: Flaming combustion

er Pr
 Fixed carbon: Glowing combustion

r p er
rio nd
tp du
ou te
ith h
w yrig
ed op
us is c
be al
ot eri
nn at
ca m

Flaming combustion of wood volatiles Glowing combustion of wood char

It is
Th
Combustion of biomass

d
ou
G
 Biomass combustion is a complex process that consists of consecutive heterogeneous and homogeneous

.
on V
si .
reactions.

is . V
m of
 The main process steps are drying, devolatilization, gasification, char combustion, and gas phase oxidation.

er Pr
 The time used for each reaction depends on the fuel size, properties, temperature, and combustion

r p er
rio nd
conditions.

tp du
 Different types of pollutants can be distinguished from the combustion process:

ou te
ith h
w yrig
Complete combustion Incomplete combustion

ed op
At the end of complete combustion, it gives off non- Uncombusted pollutants such as, Carbon dioxide,

us is c
toxic by-products. (Pollutants from complete COC and polycyclic aromatic hydrocarbons (PAH),
be al
ot eri

combustion such as NOX (NO and NO2), CO2, and soot, carbon, H2, HCN, NH3, and N2O.
nn at

H2O)
ca m
It is
Th

Ash and contaminants such as ash particles, SO2, HCl, Cu, Pb, Zn, Cd etc.
Combustion of biomass

d
ou
G
Processes and temperatures in a burning piece of wood

.
on V
si .
is . V
m of
er Pr
Gaseous-phase combustion
Flame (D) Diffusion flame, mostly turbulent- a ‘free’ fire

r p er
rio nd
T >1000o C

tp du
ou te
Heat flow

Simultaneous heat and mass transfer with chemical reaction

Gas flow

ith h
Char (C)
Surface combustion (slow process)

w yrig
500 o C < T < 800 o C

ed op
us is c
Pyrolytic
be alSame problems as in zone “A” but with sources due to
zone (B) pyrolytic reactions
ot eri

200 o C < T < 500 o C

nn at
ca m

Virgin Heat conduction in a medium with moving boundary Mitigation of

It is

wood moisture and gases

Th

(A) T < 200 o C

Combustion reactions

d
ou
 During combustion, molecules undergo chemical reactions.

. G
on V
si .
 The reactant atoms are rearranged to form new combinations (oxidized).

is . V
m of
er Pr
 The reaction equations above represent initial and final results and do not indicate the actual path of the

r p er
rio nd
reaction, which may involve many intermediate steps and intermediate products.

tp du
 This approach is similar to thermodynamics system analysis, where only end states and not path

ou te
ith h
w yrig
mechanism are used.

ed op
Some fundamental reactions of combustion:
 us is c
C + O2  CO2 + 33.8 MJ/kg-C
be al
ot eri

 2H2 + O2  2H2O + 121.0 MJ/kg-H

nn at

S + O2  SO2 + 9.3 MJ/kg-S

ca m


It is

 2C + O2  2CO + 10.2 MJ/kg-C

Th
Combustion reactions

d
ou
G
However, in fuels, the combustion reactions are more complex than above:

.
on V
 In general, air is used in combustion than pure oxygen

si .
is . V
Fuels consists of many elements such as C, H, N, S, and O

m of


er Pr
 In addition to complete combustions, fuels undergo incomplete combustions too.

r p er
rio nd
The composition of air

tp du
 On a molar (or volume) basis, dry air is composed of:

ou te
ith h
w yrig
– 20.9% oxygen O2

ed op
– 78.1% nitrogen N2
– us is c
0.9% CO2, He, H2, and others
be al
ot eri

 A good approximation of this by molar or volume is: 21% oxygen, 79% nitrogen
nn at
ca m

 Thus, each mole of oxygen is accompanied 0.79/0.21 = 3.76 moles of nitrogen

It is
Th
 d
• The theoretical air required to complete combustion of fuel results from the equation of stoichiometry

ou
G
of oxygen/fuel reaction.

.
on V
si .
• If combustion of a stoichiometric mixture is complete, then flue gas cannot have neither fuel nor

is . V
m of
er Pr
oxygen.

r p er
rio nd
Stoichiometric equation for biomass:

tp du
C6H10O5+ 6 (O2 + 3.76 N2) → 6 CO2+ 5 H2O + 22.56 N2

ou te
ith h
w yrig
Considering 21% of air is O2 and rest 79% is N2

ed op
Coal Combustion with O2 Gas Composition (vol%)

us is c
CO2 : 13.5
C + O2 --> CO2 H2O : 9.8
be al
For complete combustion to occur, air is always SO2 : 0.4
ot eri

½ O2 + H2 --> H2O
allowed in excess of the stoichiometric N2 : 73.2
nn at

O2 : 3.2
ca m

(theoretical) air requirement.

It is
Th

Air
 d
Stoichiometry and Air/Fuel Ratio

ou
. G
on V
si .
is . V
 The stoichiometric quantity of oxidizer is just that amount needed to completely burn a quantity of

m of
fuel or “Stoichiometric Combustion”.

er Pr
r p er
rio nd
 The amounts of fuel and air taking part in a combustion process are often expressed as the ‘air to

tp du
fuel’ ratio.

ou te
ith h
w yrig
 The stoichiometric oxidizer-(or air)-fuel ratio (mass) is determined by writing simple mole

ed op
balances, assuming that fuel reacts to form a ideal set of products. For hydrocarbon fuel given by
us is c
CxHy, the stoichiometric relation can be expressed as.
be al
ot eri
nn at
ca m
It is
Th
Combustion stoichiometry

d
ou
Cu H w + n O2  y CO2 + z H2O

. G
on V
si .
is . V
m of
C balance: y = u

er Pr
H balance: w = 2z, => z = w/2

r p er
O balance: 2n = 2y + z,

rio nd
tp du
=> 2n = 2u + w/2 => n = u+w/4

ou te
ith h
Therefore, the final reaction looks like

w yrig
ed op
w w
Cu H w  ( u  )O2  uCO2  ( )H 2O
us is c
be al 4 2
It is important that for one mole of fuel CuHw there is necessary exactly (u+w/4) moles of oxygen for
ot eri

complete combustion.
nn at
ca m
It is
Th
For simplicity, the simplified composition for air assumed as, O2 - 21% and N2 – 79% (volume basis) i.e.

d
for each mole of O2 in air, there are (79/21) 3.76 moles of N2.

ou
G
𝑤

.
on V
𝐶𝑢 𝐻𝑤 + n (O2 + 3.76 N2 ) → u CO2 + ( ) H2 O + 3.76 n N2

si .
2

is . V
m of
The stoichiometry air to fuel ratio can be found as:

er Pr
r p er
𝑚𝑎𝑖𝑟 4.76 𝑀𝑊𝑎𝑖𝑟

rio nd
𝐴ൗ
𝐹 = 𝑠𝑡𝑜𝑖𝑐 =
𝑚𝑓𝑢𝑒𝑙 1 𝑀𝑊𝑓𝑢𝑒𝑙

tp du
𝑠𝑡𝑜𝑖𝑐

ou te
ith h
Where MWair MWfuel ar ethe molecular weights of the air and fuel, respectively.

w yrig
ed op
𝐴ൗ 𝐹ൗ
𝐹
us is c
𝑠𝑡𝑜𝑖𝑐 𝐴 𝑎𝑐𝑡𝑢𝑎𝑙
The equivalence ratio Φ = 𝐴ൗ
=
𝐹ൗ
𝐹 𝐴
be al
𝑎𝑐𝑡𝑢𝑎𝑙 𝑠𝑡𝑜𝑖𝑐
ot eri
nn at

For fuel rich mixtures, Φ > 1

ca m

For fuel lean mixtures, Φ < 1

It is
Th

For a stoichiometric mixture, Φ = 1

Classification of solid fuels by H/C and O/C ratio

d
ou
Coal Combustion with O2 Gas Composition (vol%)

G
CO2 : 13.5

.
on V
C + O2 --> CO2 H2O : 9.8

si .
is . V
SO2 : 0.4
½ O2 + H2 --> H2O

m of
N2 : 73.2

er Pr
O2 : 3.2

r p er
rio nd
Air

tp du
ou te
ith h
(1) Biomass contains more oxygen with respect to carbon than in

w yrig
coal. This influences the gasification process, as gasification is

ed op
a partial oxidation, and

us is c
(2) Fuels with high O/C ratio have a smaller heating value than
be al
those with low O/C ratio.
ot eri

(3) The high oxygen and hydrogen content of biomass results in

nn at
ca m

high volatile and liquid yields, respectively.

It is

(4) High oxygen consumes a part of the hydrogen in the biomass,

Th

Van Krevelen Diagram for various solid fuels producing less beneficial water, and thus the high H/C content
does not translate into high gas yield.
Application of combustion

d
ou
G
Cooking

.
on V
si .
is . V
I. C. Engine

m of
er Pr
r p er
Steam engine

rio nd
tp du
Boiler

ou te
ith h
w yrig
Domestic heating

ed op
Steel industries
us is c
be al
Brick Kilns
ot eri
nn at
ca m

and many more………….

It is
Th
 d
(Overview of next lecture)

ou
. G
on V
si .
is . V
Module 06

m of
(Bioconversion of substrates into alcohol and Thermo-

er Pr
chemical conversion of biomass to solid, liquid and gaseous

r p er
rio nd
fuels)

tp du
Lecture 02 (Part II)

ou te
ith h
w yrig
Content Thermo-chemical conversion processes gasification, pyrolysis,

ed op
chemical conversion processes

us is c
be al
Thank you
ot eri
nn at
ca m

For queries, feel free to contact at : [email protected]

It is
Th
 d
ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 02 (Part II)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
is . V
m of
Module Module name Lecture Content

er Pr
r p er
rio nd
Bioconversion of Thermo-chemical conversion processes

tp du
06 substrates into 02 (Part II) gasification, pyrolysis, chemical conversion

ou te
alcohol and Thermo- processes

ith h
w yrig
chemical conversion

ed op
of biomass to solid,

us is c
liquid and gaseous
be al
fuels
ot eri
nn at
ca m
It is
Th
Gasification- The conversion alternative

d
ou
A wide range of technologies are available for the conversion of biomass to various forms of products

. G
on V
(energy).

si .
is . V
m of
Most of these technologies are suitable for either one or few of bio mass resources and have limitations in

er Pr
r p er
terms of total available energy and form of energy.

rio nd
tp du
• The direct use of fuel,

ou te
ith h
• Densification of the raw feedstock and its subsequent used as fuel,

w yrig
ed op
• Digestion to generate biogas,

• us is c
Gasification, incitation and steam generation
be al
ot eri
nn at

are some of the process technologies available for the conversion of biomass to energy, especially electrical
ca m
It is

and/ or heat energy.

Th

Non conventional energy resources, by Rai, 4th edition, 2010, Khanna Publisher
 d
ou
Gasification History

. G
on V
• Gasification is an established technology, the first commercial application of which dates back to

si .
is . V
m of
1830.

er Pr
r p er
• In the beginning years, coal and peat were used as feedstocks. In the 1800 century, the nascent idea of

rio nd
tp du
the process was to produce town gas for lighting and cooking.

ou te
• Around 1920, the major shift came in this area, when it was used to produce synthetic chemicals.

ith h
w yrig
• During World War II, biomass gasification systems played a significant role, when due to the shortage

ed op
us is c
of petroleum, wood gas generators called Gasogene or Gazogène were used to power motor vehicles.
be al
• By 1945 heavy vehicles were powered by gasification systems.
ot eri
nn at
ca m
It is
Th
Gaseous fuels from biomass

d
ou
 Renewable energy resource are derived from the by-products of timber industry, agricultural crops, raw

. G
on V
material of the forest, household waste can be gasified using following techniques:

si .
is . V
m of
er Pr
Gaseous Fuels from Biomass

r p er
rio nd
Anaerobic digestion of biomass Biomass Clean combustible

tp du
by bacterial action. gas mix (Producer gas)

ou te
ith h
Anaerobic Digestion Gasification

w yrig
Feedstock Product Feedstock

ed op
Animal dung, Biogas CO2 : 40%
Biomass

us is c
Crops, Biomass CH4 : 60%
Partial
Combustion
be al
CV: 20 MJ/Nm3 CO :19±3 % Product
ot eri

Anaerobic
Digester H2 : 18±2 %
Producer
nn at

CH4 : 3±1 %
Gas
Nutrient rich
ca m

CO2 : 10±2 %
organic manure
N2 : balance
It is
Th

Used for Cooking

Street lightning CV: 4-5 MJ/Nm3
Run small engines
 d
However, among all the alternatives, gasification is best suitable alternative in view of the following:

ou
G
• Gasification offers high flexibility in terms of various biomass materials as the feedstock.

.
on V
si .
is . V
• Thermochemical conversion efficiency of gasification is in the range of 70-90 % which is highest

m of
er Pr
among various alternatives.

r p er
• Gasification output capacity, especially in the high output ranges is controlled by availability of

rio nd
tp du
adequate feed materials rather than other technical consideration.

ou te
• The gasification unit has the highest turndown ratio compared to biogas and higher than steam

ith h
w yrig
turbine systems.

ed op
• Gasification output are suitable as a fuel to all types of internal combustion engines with capacity
us is c
derating in the range of 15% to 30%.
be al
ot eri
nn at
ca m
It is
Th
 Why Gasification

d
ou
G
Gasification essentially converts a potential fuel from one

.
on V
si .
form to another. Apart from that there are other three

is . V
m of
motivations for such transformation:

er Pr
r p er
rio nd
• It increases the heating value of the fuel by rejecting the

tp du
non-combustible compounds like water and N2

ou te
ith h
• Reduces the carbon-to-hydrogen mass ratio in the fuel.

w yrig
• Biomass contains more oxygen with respect to carbon

ed op
us is c
than coal. This influences the gasification process, as
gasification is a partial oxidation.
be al
ot eri

• Fuels with high O/C ratio have a smaller heating value

nn at
ca m

than those with low O/C ratio.

It is
Th
Gasification

d
ou
G
The word gasification implies converting a solid or liquid into a gaseous fuel by thermochemical method

.
on V
without leaving any solid carbonaceous residue.

si .
is . V
m of
er Pr
 Thermal conversion of organic materials at elevated temperature and a controlled environment leads

r p er
rio nd
to virtually all the raw material being converted to gas.

tp du
 This takes place in two stages.

ou te
ith h
w yrig
 In the first stage, the biomass is partially combusted to form producer gas and charcoal.

ed op
 In the second stage, the C02 and H2O produced in the first stage is chemically reduced by the
us is c
charcoal, forming CO and H2.
be al
ot eri

 The composition of the gas is 18 to 20% H2, an equal portion of CO, 2 to 3% CH4, 8 to 10% CO2,
nn at
ca m

and the rest nitrogen. {Makunda, 1992}. These stages are spatially separated in the gasifier, with
It is
Th

gasifier design very much dependant on the feedstock characteristics.

Makunda et al., (1992) Open-Top Wood Gasifiers, in eds., Johansson B.J., Kelly H., Reddy A.K.N. Williams R.H., Renewables for Fuels and Electricity, Island Press
Washington, D.C. pp. 699-728.
 Feed
Process in Gasifier

d
DZ Drying zone

ou
PZ Pyrolysis zone

G
OZ Oxidation zone
RZ Reduction zone

.
on V
Following physical processes takes place in

si .
is . V
gasifier:

m of
er Pr
DZ (upto 200°C)

r p er
DZ: Drying upto 200 oC PZ (upto 600°C)

rio nd

Char
tp du
gases
PZ: Pyrolysis (devolatilization) upto 600 oC

Tar
Air/O2

ou te
- mainly evaporate the water and separates Air

ith h

CO2
Tar
w yrig

H2
CH4

Ash
CO
organic liquids and non-condensable gases OZ

ed op
from char and solid carbon of the fuel RZ (upto 800°C)

us is c
CO
OZ: Combustion upto 1000 oC be al H2
CO2
- oxidizes fuel constituents in an exothermic
ot eri

Syngas CH4
H2 O
reactions
nn at

Ash Tar
ca m

Ash
RZ: Reduction (800°C)
It is
Th
 Typical Gasification reactions Reactions

d
Carbon reaction

ou
R1 (Bourdard) C  CO2 
 2CO  172 kJ / mol

G
Fuel
R2 (Water-gas or steam) C  H2O 
CO  H 2  131 kJ / mol

.
on V
si .
R3 (Hydrogasification) C  2 H 2 
 CH 4  74.8 kJ / mol

is . V
Drying zone
(65°C) R4 C  0.5 O2  CO 111 kJ / mol

m of
er Pr
Tar formation Oxidation reaction
Air Steam formation

r p er
+ (230°C)
water
R5 C  O2  CO2  394 kJ / mol

rio nd
vapor
R6 CO  0.5 O2  CO2  284 kJ / mol

tp du
Oxidation zone R7 CH4  2O2 
CO2  2H2O  803 kJ / mol

ou te
(1100°C)
R8 H2  0.5 O2  H2O  242 kJ / mol

ith h
+

w yrig
Primary reduction zone
Shift reaction

ed op
R9 CO  H2O 
CO2  H2  41.2 kJ / mol
Secondary reduction zone

us is c
(825°C) Methanation reaction
R10 2CO  2 H2 
 CH4  H2O  206 kJ / mol
be al
Solid residue
ot eri

and gas R11 CO  3H2 

 CH4  H2O  206 kJ / mol
nn at

(540°C)
R14 CO2  4H2  CH4  2H2O 165 kJ / mol
ca m

Steam-reforming reaction
It is
Th

R12 CH4  H2O 

CO  3H2  206 kJ / mol
The positive sign on the right side (+ Q kJ/kmol) of the reaction equations
implies that heat is absorbed in the reaction. A negative sign (-Q kJ/kmol) R13 CH4  0.5 O2  CO  2H2  36 kJ / mol
means that heat is released in the reaction.
• With the help of above reaction scheme and equilibrium constant, it is possible to predict the equilibrium

d
ou
composition of the gaseous compositions of the gaseous products.

G
• The equilibrium composition for a given solid fuel depends upon air supply per unit weight of biomass.

.
on V
si .
•

is . V
A dimensionless parameter known as the equivalence ratio (ER) is usually defined to characterize the air

m of
supply conditions as follows

er Pr
𝐴ൗ

r p er
𝐹ൗ
𝐹 𝐴 𝑎𝑐𝑡𝑢𝑎𝑙

rio nd
𝑠𝑡𝑜𝑖𝑐
The equivalence ratio Φ = =
𝐴ൗ 𝐹ൗ

tp du
𝐹 𝑎𝑐𝑡𝑢𝑎𝑙 𝐴 𝑠𝑡𝑜𝑖𝑐

ou te
ith h
•

w yrig
The denometer in above equation is the stoichiometric oxygen/air required for the process and it varies
from fuel to fuel. It is one of the important parameters in gasification.

ed op
us is c
• It is generally observed that the effective gasification an optimum ER of 0.2-0.4 is desired.
be al
ot eri

• If it is less than and level of 0.2, it results in incomplete gasification and hence, more char formation,
nn at

with a low-calorific product gas (pyrolysis predominates the process).

ca m
It is
Th

• while higher and ER value of 0.4 will alter gasification into combustion (combustion predominates).

Energy Environ. Sci., 2016, 9, 2939--2977

Classification of Gasifiers

d
Operational issues

ou
Updraft  Slagging and bed agglomeration

G
Fixed

.
on V
Downdraft  Syngas exit blockage
bed

si .
is . V
Crossdraft  Slag mobility issues

m of
and refractory degradation

er Pr
Basis: Relative direction of flow of gasifying agent

r p er
rio nd
Gasifiers Basis: Basis: Velocity of flow of gasifying agent

tp du
Gasifiers Bubbling

ou te
scheme of interaction of

ith h
Basis: scheme of Fluidized Fluidized bed

w yrig
gasifying agent and solid interaction of bed
gasifying agent

ed op
Circulating
fuels. and solid fuels

us is c Operational issues  Bed agglomeration  Ash deposition

be al
ot eri

and defluidization and fouling

nn at
ca m
It is

Entrained Operational issues

Th

bed  Slag mobility  Refractory degradation

 Syngas cooler fouling and plugging
 Biomass Gasifiers: Classifications based on gas and feedstock flow path

d
ou
Down Draft Up Draft

G
Cross Draft

.
Thermal and Engine Applications Thermal Applications

on V
Thermal Applications

si .
is . V
m of
er Pr
r p er
rio nd
tp du
ou te
ith h
w yrig
ed op
us is c
be al
ot eri
nn at
ca m
It is
Th

• Old Design • Recent Design

• Reasonably Dry Wood • Reasonably Moist Wood • High Tar High Tar
• Better Gas Quality • Superior Gas Quality • Better Gas Quality High Moisture Wood
 Downdraft gasifier

d
ou
Open top

G
Air

.
•

on V
The downdraft type is best suited for a variety of Biomass hopper

si .
is . V
Gas out
Wood chips
biomass.

m of
er Pr
Annular jacket Drying zone
• Due to its design the raw products are forces to pass (350°C)

r p er
Insulation

rio nd
through a high-temperature zone. Pyrolysis zone

tp du
(350 - 600°C)

ou te
As a result most of the unburnt pyrolysis products Oxidation zone
(1000 - 1200°C)

ith h
w yrig
(especially tars) can be cracked into gaseous Producer gas Air nozzle

ed op
Air
hydrocarbons, thus producing a relatively clean gas.

• us is c
In steady state operation, heat of the combustion cause Reduction zone
be al
(700 - 1000°C)
ot eri

wood chips to pyrolyze and lose 70-80% of their weight. Ash

nn at
ca m

Grate
• The downdraft Gasifier, also called the concurrent
It is
Th

Water seal
moving bed gasifier.
Updraft Gasifier Biomass hopper

d
ou
G
Gas out
• The updraft-type gasifier is also called as counter flow gasifier.

.
on V
si .
is . V
Wood chips
• In this type of gasifier, the air enters at the combustion zone

m of
Drying zone

er Pr
and the producer gas leaves near the top of the gasifier.

r p er
rio nd
• This type of gasifier is easy to build and operate. Insulation

tp du
Pyrolysis zone

• The updraft gasifier achieves highest efficiency as the hot gas

ou te
ith h
w yrig
Reduction zone
passes through the fuel bed and leaves the gasifier at a low

ed op
temperature.

us is c
Oxidation zone
(Hearth zone)
• The gas produced has practically no ash but contains tar and
be al
ot eri

Air
water vapour because of passing of gas through unburnt fuel.
nn at

Grate
ca m

Ash
• The updraft gasifiers are suitable for tar-free feed stock (fuels
It is
Th

like charcoal) and are not suitable for high volatile fuels.
 Crossdraft Gasifier

d
ou
Biomass

G
hopper
• This type of gasifier, air enters the gasifier through a

.
on V
si .
Wood chips
water-cooled nozzle mounted on one side of the firebox.

is . V
m of
Drying zone

er Pr
• Gasifier operates at a very high temperature and confines Insulation

r p er
rio nd
its combustion and reduction zone near the air nozzle.

tp du
Pyrolysis zone

ou te
Hearth
• zone Reduction zone

ith h
Due to short path length for gasification reactions, this type

w yrig
of gasifier responds most rapidly for change in gas Air Gas out

ed op
production.

us is c
Burning
be al char

Ash
ot eri

• The high exit temperature of the gas and low CO2

nn at

reduction results in poor quality of gas and low efficiency.

ca m
It is
Th

• Therefore, this type of gasifier is not in common use.

 Fluidized-bed Gasifier Dirty Fuel Gas

d
ou
G
• Fluidised bed gasifier is most versatile and can operate

.
on V
si .
is . V
on any biomass form.

m of
• It takes the advantage of excellent mixing characteristics

er Pr
and high reaction rates of gas-solid mixture. Biomass Inert Bed

r p er
Feed Fluidized

rio nd
• A fluidized bed gasifer is a chamber with a bed of -inert

tp du
Refractory
particles such as sand -supported by a distributor plate. Lining

ou te
•

ith h
The velocity of the air is progressively increased till the Solids Grating

w yrig
and Gas
upward drag of air on bed particles supports the entire

ed op
weight of the bed.
•
us is c
The moving mass of solid is called a fluidized bed.
be al
ot eri

• The turbulence of the bed increases with velocity above Fluidized

nn at

Air or O2
the minimum fluidization velocity.
ca m
It is
Th

The availability of high area in F.B. and constantly moving mass results in good conversion efficiency and lower
operating temperature compared to fixed beds.
Circulating fluidized bed gasifier

d
ou
Fuel gas

G
• High throughput

.
on V

Cyclone
•

si .
Fuel flexibility

is . V
m of
• Tolerates reasonably high moisture

er Pr
• Gasifier

r p er
Less pollution (no Nox and SOx, less CO2) due to low temperature

rio nd
operation

tp du
ou te
• But, complex process -for gas-solids multiphase flow, chemical reactions,

ith h
Biomass

w yrig
heat & mass transfer

ed op
• Complex operation, precision control of operating parameters is

us is c
Feeder
essentially needed
be al
ot eri

• Unequal pressure distribution across bed Fan

nn at

Air
ca m

• Hot spots, agglomeration, slugging in bed

It is
Th

• Elutriation of solid fines, loss of un-burnt fuel particles from bed CFB Gasifier
• Fuel gas cleaning
 BFB Gasifier

d
ou
G
• Compact design and very high throughput Fuel gas

.
on V
• Inferior quality fuels can be used for fuel gas generation

si .
is . V
•

m of
High energy conversion ratio: Intense gas-solids mixing and re-

er Pr

Cyclone
circulation of un-burnt or partially burnt solid particles Gasifier

r p er
rio nd
• Less pollution: (no Nox and SOx, less CO2) due to low temperature

tp du
operation

ou te
ith h
• Complex gas-solids flow phenomena.

w yrig
Biomass Ash
• Maintaining pressure balance in the loop and overall solids

ed op
us is c
circulation. Ash

•
be al
Solids movement through loop seal for continuous operation. Feeder
ot eri

• Maintaining uniform temperature along the height of fast bed reactor.

nn at

Air
ca m

• Fuel gas cleaning, ash disposal etc

It is
Th
Advantages of fluidised bed gasifier

d
ou
G
• Fuel flexibility and type of fuel with calorific value ranging from 800-800kcal/kg can be used.

.
on V
si .
is . V
• Good heat storage capacity to always ensure combustion.

m of
•

er Pr
Quick start up.

r p er
• High combustion efficiency

rio nd
tp du
• High output rate

ou te
•

ith h
Consistent rate of combustion

w yrig
• Usages of fuel with high moisture content

ed op
us is c
• Rapid response to fuel input changes
be al
• Because of low temperature, corrosion caused by alkali compounds in ash significantly reduced.
ot eri
nn at

• Uniform temperature throughout the furnace volume

ca m
It is

• Reduced emission of harmful nitrous oxide

Th

• Sulphur dioxide emission can be reduced to be acceptable level with less expense
Comparison of Combustion and Gasification

d
ou
G
Criteria Combustion Gasification

.
on V
si .
Amount of flue

is . V
More Less
gas

m of
er Pr
Concentration of
Lower Higher

r p er
CO2

rio nd
SO2 emission Higher Lower

tp du
ou te
NOx emission Higher Lower

ith h
w yrig
Generation of
Higher Lower
solid waste

ed op
Mode of

us is c
Difficult Easy
transportation
be al
Value added
ot eri

No Yes
products
nn at
ca m

Application Narrow range Wider range

It is
Th
 d
(Overview of next lecture)

ou
. G
on V
si .
is . V
Module 06

m of
(Bioconversion of substrates into alcohol and Thermo-

er Pr
chemical conversion of biomass to solid, liquid and gaseous

r p er
rio nd
fuels)

tp du
Lecture 02 (Part III)

ou te
ith h
w yrig
Content Thermo-chemical conversion processes gasification, pyrolysis,

ed op
chemical conversion processes

us is c
be al
Thank you
ot eri
nn at
ca m

For queries, feel free to contact at : [email protected]

It is
Th
 d
ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 02 (Part III)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
is . V
m of
Module Module name Lecture Content

er Pr
r p er
rio nd
Bioconversion of Thermo-chemical conversion processes

tp du
06 substrates into 02 (Part III) pyrolysis, liquefaction and chemical

ou te
alcohol and Thermo- conversion processes

ith h
w yrig
chemical conversion

ed op
of biomass to solid,

us is c
liquid and gaseous
be al
fuels
ot eri
nn at
ca m
It is
Th
Pyrolysis

d
ou
G
The term “pyrolysis” means thermal decomposition or chemical change brought about by heat.

.
on V
si .
is . V
Although, the term could cover torrefaction, carbonization, and pyrolysis processes. But, generally the

m of
term “pyrolysis” is more constraining to thermal process for production of liquid extracts from biomass.

er Pr
r p er
rio nd
tp du
The process is performed at temperatures from 300 to 650 °C and often includes a catalyst with the aim

ou te
ith h
of increasing the energy density of the product by removing oxygen (as water and volatiles).

w yrig
ed op
us is c
be al
ot eri
nn at
ca m
It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Important milestones in the development and use of PYROLYSIS

d
ou
. G
•

on V
The practice of carbonizing wood to manufacture char has existed for as long as human history has

si .
is . V
been recorded.

m of
er Pr
r p er
rio nd
• At first, production of char was the sole objective of wood carbonization.

tp du
ou te
ith h
w yrig
• In fact, char is the first synthetic material produced by humankind.

ed op
• us is c
However, new byproducts (tars, acetic acid, methanol, acetone) were obtained from wood as
be al
ot eri

civilization progressed and new reactors and bio-oil recovery systems were designed.
nn at
ca m
It is
Th

DOI: 10.1021/acs.energyfuels.7b00641; Energy Fuels 2017, 31, 5751−5775

Important milestones in the development and use of PYROLYSIS

d
ou
. G
• Technologies to recover and utilize condensable pyrolysis products were relatively well developed.

on V
si .
is . V
• This resulted in brick kilns to recover the condensable gases that were normally lost in the pits

m of
end of the 18th
• Iron retorts (vessels) followed brick kilns.

er Pr
Century

r p er
rio nd
• The “acid-wood industry”, also known as the “wood distillation industry”, was established to produce charcoal and

tp du
liquid by-products (e.g., acetic acid, methanol, and acetone).

ou te
ith h
19th Century • The hardwood distillation industry is frequently considered to be the precursor of the modern petrochemical

w yrig
industry.

ed op
us is c
• The rise of the petroleum industry at the beginning of the 20th century, with cheaper products, caused the decline of the
be al
pyrolysis industry.
ot eri

beginning of
nn at

the 20th
• However, the oil crisis during the 1970s forced a reconsideration of biomass pyrolysis as a technology that could
ca m

Century contribute to reducing dependence on fossil fuel.

It is
Th

DOI: 10.1021/acs.energyfuels.7b00641; Energy Fuels 2017, 31, 5751−5775

Thermochemical conversion: Pyrolysis

d
ou
G
• Unlike combustion, pyrolysis carried out in the total absence of O2, except in cases where partial

.
on V
si .
is . V
combustion is allowed to provide the thermal energy needed for this process.

m of
• In pyrolysis, large hydrocarbon components of biomass are broken down into smaller molecules

er Pr
r p er
• Pyrolysis is a promising technique for conversion of waste biomass into useful liquid fuels.

rio nd
tp du
• The composition of the products,

ou te
ith h
w yrig
f (T, P, rate of heating and gas composition during devolatilization)

ed op
us is c
• This process thermally decomposes biomass into gas, liquid, and solid by rapidly heating the biomass
be al
ot eri

above 300-400 oC.

nn at
ca m

- Fast pyrolysis product: mainly liquid fuel (bio-oil)

It is
Th

- Slow pyrolysis products: some gas and solid bio-char

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Representation of pyrolysis process using ternary diagram

d
ou
G
• The ternary diagram is useful for representing biomass

.
on V
si .
is . V
conversion processes (pyrolysis).

m of
• The corners of the triangle represent pure carbon, oxygen, and

er Pr
r p er
hydrogen (i.e. 100%) concentration.

rio nd
tp du
• Points within the triangle represent ternary mixtures of these

ou te
ith h
three substances.

w yrig
• The side opposite to a corner with a pure component (C, O, or

ed op
us is c
H) represents zero concentration of that component.
be al
ot eri
nn at
ca m

• Slow pyrolysis (i.e. carbonization) moves the product toward “C” through the formation of solid char.
It is
Th

• Fast pyrolysis moves the product toward “H” and away from “O”, which implies higher liquid product.

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Classical Pyrolysis Process

d
ou
Biomass

G
Combustion
Products Feed Alternate Path

.
on V
for Fuel Gas

si .
is . V
m of
Refractory Lined

er Pr
Combustion Chamber

r p er
(Outer Shell)

io d
Combustion

t Combustion
pr un
Drying

d
ou te
ith h
w yrig
Metallic

ed op
Pyrolysis
Gasifier Shell

us is c
be al
Fuel for
ot eri

Fuel Gas Combustion

nn at

Char/Ash Chamber
ca m
It is
Th

Classical Pyrolysis Process (Indirectly Fired, Vertical Flow, Packed Bed)

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Pyrolyzer

d
ou
Non-condensable
gases

. G
Cyclone

on V
si .
is . V
Biomass

m of
er Pr
r p er
Gas

rio nd
condenser

tp du
ou te
Char Oil

ith h
collection

w yrig
Bio-oil

ed op
storage

us is c
Screw feeder Gas
burner
be al
ot eri
nn at
ca m
It is
Th

Simplified schematic of a pyrolysis process

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Types of pyrolysis

d
ou
G
Pyrolysis process are generally classified into four categories based on heating rate as:

.
on V
• Slow pyrolysis,

si .
is . V
m of
• Fast pyrolysis,

er Pr
•

r p er
Flash pyrolysis and

rio nd
•

tp du
Isothermal pyrolysis.

ou te
ith h
w yrig
Based on the environment or medium in which the pyrolysis is carried out is classified into two types,

ed op
us is c
viz. be al
• High pressure pyrolysis and
ot eri
nn at

• Hydrous pyrolysis
ca m
It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Slow Pyrolysis

d
ou
G
• The biomass is heated slowly in the absence of oxygen to a relatively low temperature (~ 400 oC) over

.
on V
si .
an extended period of time.

is . V
m of
er Pr
r p er
• It is the oldest form of pyrolysis, which is in use for several years.

rio nd
tp du
ou te
• The process is not used for traditional pyrolysis, where liquid is the main product

ith h
w yrig
ed op
us is c
• Slow pyrolysis is used primarily for char production
be al
ot eri
nn at

• Carbonization and Torrefaction are the types of slow pyrolysis process, in which the production of
ca m
It is

charcoal or char is the primary goal

Th
Fast Pyrolysis

d
ou
G
• The biomass is heated so rapidly that it reaches the peak (pyrolysis) temperature before it decomposes.

.
on V
• In fast pyrolysis, the vapor residence time is in the order of seconds or milliseconds.

si .
is . V
m of
er Pr
r p er
• The primary goal of fast pyrolysis is to maximize the production of liquid or bio-oil.

rio nd
tp du
• The heating rate can be as high as 1000 to 10,000 oC/s, but the peak temperature should be below 650

ou te
oC, if bio-oil is the product of interest.

ith h
w yrig
ed op
us is c
• However, the peak temperature can be up to 1000 oC, if the production of gas is of primary interest.
be al
• Flash and Ultrarapid are the types of fast pyrolysis process and used primarily for the production of
ot eri
nn at

bio-oil and gas.

ca m
It is
Th
Flash Pyrolysis

d
ou
G
• In flash pyrolysis, biomass is heated rapidly in the absence of oxygen to a relatively modest

.
on V
si .
temperature range of 450 -600 oC.

is . V
m of
er Pr
r p er
• The product, containing condensable and non-condensable gas, leaves the pyrolyzer within a short

rio nd
tp du
residence time of 30-1500 ms.

ou te
ith h
w yrig
• Upon cooling, the condensable vapor is then condensed into a liquid fuel known as “bio-oil.” Such

ed op
us is c
an operation increases the liquid yield while reducing the char production.
be al
ot eri
nn at

• A typical yield of bio-oil in flash pyrolysis is 70-75% of the total pyrolysis product.
ca m
It is
Th
 d
ou
Pyrolysis in the Presence of a Medium

G
.
on V
si .
In general pyrolysis is carried out in the absence of a medium such as air, but some are performed in a

is . V
m of
medium such as water or hydrogen.

er Pr
r p er
rio nd
Hydropyrolysis

tp du
ou te
ith h
• In this thermal decomposition of biomass takes place in an atmosphere of high-pressure hydrogen.

w yrig
ed op
• Hydropyrolysis can increase the volatile yield and the proportion of lower-molar-mass hydrocarbons.

us is c
• It is different from hydrogasification of char.
be al
ot eri

• Hydropyrolysis can produce bio-oil with reduced oxygen.

nn at
ca m
It is
Th
Hydrous pyrolysis

d
ou
G
• In this process thermal cracking of biomass is carried out in a high temperature water.

.
on V
si .
is . V
• It could convert, raw material into light hydrocarbon for production of fuel, fertilizer, or chemicals.

m of
er Pr
• In a two-stage process, the first stage takes place in water at 200 – 300 oC under pressure.

r p er
rio nd
• In the second stage, the produced hydrocarbon is cracked into lighter hydrocarbon at a temperature of

tp du
around 500 0C.

ou te
ith h
w yrig
• High oxygen content is an important shortcoming of bio-oil.

ed op
us is c
be al
ot eri
nn at
ca m
It is
Th
Approx. heating in a pyrolyzer to achieve final product of interest

d
ou
G
Production of charcoal Fast pyrolysis To Maximize Gas
through carbonization uses step (II) Production use (III)

.
on V
use (I)

si .
is . V
m of
er Pr
To Maximize To Maximize To Maximize

r p er
Char Liquid Yield Gas

rio nd
Production Production

tp du
• slow heating rate ( < 0.01 • use a moderate to slow
• Use a high heating rate

ou te
to 2.0 oC/s) heating rate,
• a moderate final temperature

ith h
Feed • a low final temperature, • a high final temperature

w yrig
and (450 – 600 oC) and (700 – 900 oC) and
• a long gas residence time • a short gas residence time • a long gas residence time

ed op
us is c
be al
I II III
ot eri
nn at
ca m
It is
Th

Char Liquid yield Gas

Production Production
* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Physical aspects

d
ou
. G
Secondary cracking of volatiles into

on V
char and non condensable gases

si .
is . V
m of
exothermic dehydration vapor or precursor Final stage secondary char

er Pr
of biomass takes place to bio-oil is produced ( ~ 300 – 900 oC). and gases

Initial stage (100300C).

r p er
rio nd
Biomass

Biomass

Biomass
Biomass
Feed

tp du
ou te
ith h
w yrig
ed op
 primary char

us is c
oC) Initial stage primary pyrolysis
Drying (100
(100 – 300 oC) (200- 600 oC)  condensable gases
be al
and
ot eri

 non condensable
nn at

Secondary gases
ca m

Cracking zone
It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Chemical aspects

d
ou
. G
on V
produce char and non-

si .
condensable gases

is . V
m of
Reaction II

er Pr
Dehydration

r p er
Dehydration

rio nd
Decarboxylation

tp du
Carbonization
Reaction I

ou te
Cellulose

ith h
Active Cellulose

w yrig
Reaction III Reaction IV
depolymerization
Secondary cracking

ed op
Depolymerization and division

us is c
condensable Char, tar, non-
gases condensable gases
be al
ot eri
nn at

forming vapors including tar

ca m

and condensable gases

It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Thermal conversion processes, process conditions, and product distribution

d
ou
. G
on V
si .
Mode Process Conditions Product Distribution (%)

is . V
m of
Peak Temperature Vapor Residence Time Char Liquid Gas

er Pr
r p er
Slow Moderate (-500 °C) Long (5 – 30 min) 35 % 30 % (70 % water) 35 %

rio nd
tp du
Intermediate Moderate (-500 °C) Moderate (10 – 20 sec) 20 – 25 % 50 % (50 % water) 25 – 30 %

ou te
ith h
Fast Moderate (-500 °C) Short (< 2 sec) 12 % 75 % (25 % water) 13 %

w yrig
ed op
Gasification High (> 800 °C) Moderate (10 – 20 sec) 10 % 5 % tar 85 %

us is c
be al (55 % water)
ot eri
nn at
ca m
It is
Th

* Courtesy: Biomass gasification, pyrolysis and torrefaction, by P. Basu, 2nd edition, 2013, Publisher AP
Thermochemical conversion (Liquefaction)

d
ou
. G
on V
Hydrothermal liquefaction involves direct liquefaction of biomass into liquid oil with a reacting

si .
is . V
temperature of lower than 400 °C and 10–25 Mpa in aqueous medium. In this process, water is an

m of
er Pr
important reactant and catalyst.

r p er
rio nd
tp du
ou te
• The product of biomass liquefaction is oil which has a much higher energy content than syngas or

ith h
w yrig
alcohol.

ed op
us is c
• If the feedstock contains a lot of water, HTL does not require drying as gasification or pyrolysis.
be al
ot eri
nn at

• The drying process typically takes large quantities of energy and time. The energy used to heat up the
ca m
It is

feedstock in the HTL process could be recovered effectively with the existing technology.
Th
• The complexity of the chemical reactions involved in HTL can be attributed to the complex

d
ou
composition of feedstocks.

. G
on V
si .
is . V
Following are the reactions that may be involved in the liquefaction of carbonaceous materials.

m of
er Pr
• cracking and reduction of polymers such as lignin and lipids,

r p er
rio nd
• hydrolysis of cellulose and hemicellulose to glucose and other simple sugars,

tp du
ou te
• hydrogenolysis in the presence of hydrogen,

ith h
w yrig
• reduction of amino acids,

ed op
• reformation reactions via dehydration, (oxygen in the biomass is removed)
us is c
be al
• decarboxylation, (oxygen in the biomass is removed)
ot eri
nn at

• C - O and C - C bond cleavage, and

ca m
It is

• hydrogenation of functional groups.

Th
The HTL products characterized by their phases are:

d
• bio-crude oil,

ou
G
• aqueous phase,

.
on V
• gaseous phase, and

si .
is . V
• solid residue.

m of
er Pr
r p er
Bio-crude oil production via HTL

rio nd
tp du
• Bio-crude oil obtained from HTL is dark brown and viscous liquid constituting 18–67% of the total

ou te
weight of the feedstock.

ith h
w yrig
• The quality and yield of bio-oil vary with the type of biomass, operating conditions and type of catalyst or

ed op
us is c
co-solvents used. be al
• The HTL bio- oil contains a large fraction of phenolic compounds, where the fraction of polar compounds
ot eri
nn at

such as acids and sugars are very less.

ca m
It is

• The produced bio-oil has energy content about 30–36 MJ/kg, and elemental composition as 64–73% of
Th

carbon, 8–10% of hydrogen, 10–25% of oxygen, 3–5% of nitrogen (Jiang et al. 2018).
The aqueous phase from HTL
•

d
Aqueous phase in HTL is considered as a useful by-product, which constitutes 20–50% of the total weight

ou
G
of feedstock, and majorly depends on the operating conditions and type of biomass.

.
on V
si .
•

is . V
Major chemicals in aqueous phase: organic acids, alcohols, ketones, and phenolic compounds.

m of
•

er Pr
HTL aqueous by-product is considered as a nutrient source (containing N, S, halogens, and minerals) and

r p er
utilized for the cultivation of biomass or can be recycled to enhance bio-oil yield.

rio nd
tp du
Gaseous products from HTL

ou te
ith h
•

w yrig
Gaseous byproducts constitute to 5–10% of the total weight of feedstock and CO2 is the main gaseous

ed op
product of HTL along with other gases such as H2, CO and CH4 in small fractions (Magdeldin et al. 2017).

us is c
be al
Solid residue via HTL
ot eri
nn at

• The solid residues from the HTL process are termed as char (bio-char), containing high fractions of C, H,
ca m
It is

and N (Basu 2013).

Th

• Generally, char from HTL is used as a potential source of nutrient for soil amendment.
Comparison of bio-oil properties

d
ou
. G
on V
HTL Pyrolysis Fossil oil

si .
is . V
Carbon (wt. %) 68–81 56–66 83.0–87.0

m of
er Pr
Sulfur + Nitrogen 0.1 0.1 0.01–5

r p er
(wt. %)

rio nd
tp du
Oxygen (wt. %) 9–25 27–38 0.05–1.5

ou te
ith h
Water (wt. %) 6–25 24–52 <1

w yrig
Density (kg L−1)

ed op
1.10–1.14 1.11–1.23 0.75–1.0

us is c
be al
ot eri

Compared to pyrolysis oil, HTL oils have almost half of the oxygen content, which makes upgrading of HTL
nn at
ca m

boil-oil much easier and less expensive

It is
Th

Furimsky E (2012), Hydroprocessing challenges in biofuels production, catalysis today

Undesirable characteristics of bio-oil and their effects

d
ou
Characteristics Effect

G
Low pH value Corrosion problems

.
on V
si .
is . V
High viscosity Handling and pumping problems

m of
Instability and temperature sensitivity Storage problems

er Pr
r p er
Phase separation

rio nd
Decomposition and gum formation

tp du
Viscosity increase

ou te
ith h
Char and solids content Combustions problems

w yrig
Equipment blockage

ed op
Hydroprocessing can be used to

us is c
Erosion
deoxygenate the oil and
be al
Alkali metals Depositions of solids in boilers, engines, and turbines
subsequently improve the
ot eri
nn at

properties of the bio-oil. This Water content Complex effect on heating value, viscosity, pH,
ca m

homogeneity and other characteristics

deoxygenating process is called
It is
Th

hydrodeoxygenation (HDO). Oxygen content Higher viscosity and lower heating value

Courtsey: Mercader et al., (2010), Production of advanced bio-fuels: Co-refning upgraded pyrolysis oil, Berlin Google Scholar
Furimsky E (2000) Review: catalytic hydrodeoxygenation. Appl Catal A 199:147–190, CrossRefGoogle Scholar
Chemical conversion processes

d
ou
G
Biomass to high added value chemicals, an emerging conversion chemistry

.
on V
si .
is . V
m of
Biomass

er Pr
r p er
rio nd
tp du
ou te
Extraction Biodiesel Sugar Thermochemical

ith h
of chemicals production fermentation conversion

w yrig
ed op
• Proteins • Ethanol

us is c
• Vitamins Glycerol • Lactic acid Bio-SNG
• Fragrances
be al
• Pharmaceuticals
ot eri

Chemicals Chemicals
nn at
ca m
It is
Th

PNNL and NREL

 Cement
additive

d
Lignin

ou
Fuel

G
additive

.
on V
Lignocellulosic

si .
is . V
material

m of
Glucose

er Pr
Hemicellulose Arabinose

r p er
rio nd
Xylose

tp du
ou te
Ethanol Xylitol 2,3 Butane diol

ith h
w yrig
ed op
Cellulose

us is c
be al
CTA, HEC, Levulinic acid, Ethanol THF, MTHF, Diphenolic acid, 5-Amino
ot eri

HPMC lactic acid (biofuel) 1,4 Butane Diol, Succinic acid levulinic acid
nn at

(high-volume (platform NMP, lactones (monomers) (pesticide)

ca m

polymers) chemical) (solvents) COOH O

It is

H3C H2N
Th

O COOH

H3C COOH 5-Amino-levulinic acid

HO OH
Levulinic acid
Diphenolic acid PNNL and NREL
Glucose : Platform Chemical for Value-Added Chemicals

d
ou
G.
on V
Acid or Enzyme Hydrolysis

si .
is . V
m of
er Pr
r p er
rio nd
tp du
ou te
ith h
w yrig
ed op
us is c
be al
ot eri
nn at
ca m
It is
Th

PNNL and NREL Corma et. al, Chem. Rev. 107(6), 2411(2007
 Th
It is
ca m
nn at
ot eri
be al
us is c
ed op
w yrig
ith h
ou te
Glucose : another platform via oxidation reactions

tp du
rio nd
r p er
er Pr
m of
is . V
si .
on V
. G
ou
d
PNNL and NREL
 Th
It is
ca m
nn at
ot eri
be al
us is c
ed op
w yrig
ith h
ou te
tp du
rio nd
r p er
er Pr
Lactic Acid : platform chemical for value-added chemicals

m of
is . V
si .
on V
. G
ou
d
PNNL and NREL
 Th
It is
ca m
nn at
ot eri
be al
us is c
ed op
w yrig
ith h
ou te
tp du
rio nd
r p er
Levulinic Acid : platform chemical for value-added chemicals

er Pr
m of
is . V
si .
on V
. G
ou
d
PNNL and NREL
 Hemicellulose : platform chemical for value-added chemicals

d
ou
G
O CH2OH

.
on V
Furfuryl alcohol

si .
is . V
• Furfural is a natural precursor

m of
H2 to furan‐based chemicals.

er Pr
CHO
• It has been considered an
Bagasse,

r p er
+ important building block for the
Corn cobs, + H2O, H ( CHOH)3

rio nd
H (C5H8O4)n -3 H2O
Wheat straw,
O production of non

tp du
Rice hulls CH2OH CHO
Pentosan Pentose sugar Furfural petroleum‐derived chemicals, a

ou te
(mainly xylose) ( 2-Furancarboxyaldehyde) new generation of bioplastics,

ith h
(Polypentoside)

w yrig
(mainly xylan)
and potential biofuels or fuel
Oxide catalyst,

ed op
H2 Steam, 400 C additives.

us is c
• Sugar alcohols are important products in the food • Furfural and its derivatives
industry. For instance, xylitol is a pentose sugar have been used to make jet and
be al
CH2OH
ot eri

alcohol used as a sugar substitute in the food diesel fuel range alkanes, to
( CHOH)3
nn at

industry because of its low caloric and O serve as gasoline blend stock.
CH2OH
ca m

anticarcinogenic properties. Furan

It is

Xylitol
•
Th

In addition, xylitol is a building block for a variety

of commodity chemicals.
PNNL and NREL
 d
(Overview of next lecture)

ou
. G
on V
si .
is . V
Module 06

m of
(Bioconversion of substrates into alcohol and Thermo-

er Pr
chemical conversion of biomass to solid, liquid and gaseous

r p er
rio nd
fuels)

tp du
Lecture 03 (Part II)

ou te
ith h
w yrig
Content Practice problems

ed op
us is c
be al
Thank you
ot eri
nn at
ca m

For queries, feel free to contact at : [email protected]

It is
Th
 d
ou
. G
on V
si .
is . V
Renewable Energy Engineering: Solar, Wind

m of
er Pr
and Biomass Energy Systems

r p er
rio nd
tp du
Module - 06

ou te
Lecture – 03 (Part II)

ith h
w yrig
ed op
us is c
be al
Prof. Vaibhav V. Goud and Dr. R. Anandalakshmi
ot eri

Department of Chemical Engineering

nn at

Indian Institute of Technology Guwahati

ca m

Guwahati – 781039, Assam (India)

It is
Th
 d
ou
. G
on V
si .
is . V
m of
Module Module name Lecture Content

er Pr
r p er
rio nd
Bioconversion of

tp du
06 substrates into 03 (Part II) Practice problems

ou te
alcohol and Thermo-

ith h
w yrig
chemical conversion

ed op
of biomass to solid,

us is c
liquid and gaseous
be al
fuels
ot eri
nn at
ca m
It is
Th
Basic combustion Reactants

d
Fuel: (CuHw)

ou
process Products

. G
Combustion Chamber CO2, H2O, N2, O2

on V
si .
is . V
Air: O2 + 3.76N2

m of
er Pr
r p er
rio nd
C u H w  n ( O2  3.76 N 2 )  y CO 2  z H 2O  c N 2  d O2

tp du
• n: stoichiometric coefficient for the oxidizer

ou te
•

ith h
This reaction will yield 5 unknowns (n, y, z, c, d).

w yrig
• Assumption: No excess oxygen in the products, therefore, d=0.
• By balancing number of atoms of each element, we obtain 4 equations.

ed op
us is c
Element Amount in reactants = Amount in products Reduced equation
be al
Carbon u y u=y
ot eri
nn at

Hydrogen w 2z z = w/2
ca m

Oxygen 2n 2y+z n = y+(z/2) or u + (w/4)

It is
Th

Nitrogen 2(3.76) × n 2c c = 3.76 × n

Example 1: A fuel gas fired industrial boiler operates with an O2 concentration of 3 mole percent in the flue

d
ou
gases. Determine the operating air-fuel ratio. Treat the fuel gas as ethane.

. G
on V
si .
is . V
m of
Given: Molecular weight of air = 29

er Pr
Molecular weight of fuel = 30

r p er
rio nd
O2 mole fraction = 0.03

tp du
ou te
ith h
w yrig
“assuming complete combustion” i.e. all fuel C is found in CO2 and all H is found in H2O

ed op
us is c
Reactants be al
Fuel: (C2H6)
ot eri

Products
nn at

Combustion Chamber CO2, H2O, N2, O2

ca m
It is

Air: O2 + 3.76N2
Th
Given: we can use O2 fraction to find the air-fuel ratio by writing overall combustion equation, assuming complete

d
ou
combustion

. G
on V
si .
is . V
C 2H 6 + n (O2 + 3.76 N2) 2CO2 + 3 H2O + d O2 + 3.76 n N2

m of
er Pr
2n = 4 + 3 + 2 d

r p er
rio nd
2n = 7 + 2d

tp du
d = n - 7/2

ou te
ith h
w yrig
NO
From mole fraction definition: 2
mole fraction of O2 =

ed op
Nmix

us is c d
be al
=
2 + 3 + d + 3.76n
ot eri
nn at

n − 3.5
ca m

=
It is

2 + 3 + d + 3.76 n
Th
 n − 3.5

d
ou
0.03 =
2 + 3 + d + 3.76 n

. G
on V
0.045 + 0.1428 n = n − 3.5

si .
is . V
m of
n = 4.136

er Pr
r p er
rio nd
𝐴 𝑚𝑎𝑖𝑟 4.76 × n × MW𝑎𝑖𝑟

tp du
𝑇ℎ𝑒𝑜𝑟𝑒𝑡𝑖𝑐𝑎𝑙; = =
𝐹 𝑚𝑓𝑢𝑒𝑙 1 × MW𝑓𝑢𝑒𝑙

ou te
𝑠𝑡𝑜𝑖𝑐 𝑠𝑡𝑜𝑖𝑐

ith h
w yrig
4.76 × 4.136 × 29
=

ed op
1 × 30

us is c = 19.03
𝑘𝑔𝑎𝑖𝑟
൘𝑘𝑔
be al
𝑓𝑢𝑒𝑙
ot eri
nn at
ca m
It is
Th
Example 2: Develop the combustion equation and determine the air-fuel ratio for the complete combustion

d
ou
of fuel i.e. n-ethane with a) theoretical air, and b) excess 50% air.

. G
on V
si .
is . V
m of
er Pr
Given: Molecular weight of air = 29

r p er
rio nd
Molecular weight of fuel = 30

tp du
ou te
ith h
w yrig
“assuming complete combustion” i.e all fuel C is found in CO2 and all H is found in H2O

ed op
us is c
Reactants be al
Fuel: (C2H6)
ot eri

Products
nn at

Combustion Chamber CO2, H2O, N2, O2

ca m
It is

Air: O2 + 3.76N2
Th
a) theoretical air (in this case product do not contain “oxygen”)

d
ou
G
overall combustion equation, assuming complete combustion

.
on V
si .
is . V
C u H w  n ( O2  3.76 N 2 )  y CO 2  z H 2O  3.76n N 2

m of
er Pr
C 2H 6 + n (O2 + 3.76 N2) 2CO2 + 3 H2O + 3.76 n N2

r p er
rio nd
tp du
equating coefficients, u = 2, z = 3, n = 2+(3/2)= 3.5

ou te
ith h
w yrig
substitute equating coefficient in the above equation,

ed op
us is c
C2H 6 + 3.5 (O2 + 3.76 N2)
be al 2CO2 + 3 H2O + 3.76 (3.5 N2)
ot eri

C2H 6 + 3.5 (O2 + 3.76 N2) 2CO2 + 3 H2O + 13.6 N2

nn at
ca m
It is
Th
 d
𝐴 𝑚𝑎𝑖𝑟 4.76 × n × MW𝑎𝑖𝑟

ou
𝑇ℎ𝑒𝑜𝑟𝑒𝑡𝑖𝑐𝑎𝑙; = =
𝐹 𝑚𝑓𝑢𝑒𝑙 1 × MW𝑓𝑢𝑒𝑙

G
𝑠𝑡𝑜𝑖𝑐 𝑠𝑡𝑜𝑖𝑐

.
on V
si .
4.76 × 3.5 × 29

is . V
=
1 × 30

m of
er Pr
𝑘𝑔𝑎𝑖𝑟

r p er
= 16.10 ൘𝑘𝑔

rio nd
𝑓𝑢𝑒𝑙

tp du
ou te
ith h
w yrig
ed op
us is c
be al
ot eri
nn at
ca m
It is
Th
b) 50% excess air (in this case product contain “oxygen”)

d
ou
G
C2H 6 + 3.5 (O2 + 3.76 N2) 2CO2 + 3 H2O + 13.6 N2 (Stoic equation)

.
on V
si .
is . V
m of
C2H 6 + 1.5 × 3.5 (O2 + 3.76 N2) 2CO2 + 3H2O + 0.5 × 3.5 O2 + 1.5 × 3.5 × 3.76 N2

er Pr
r p er
rio nd
C2H 6 + 5.25 (O2 + 3.76 N2) 2CO2 + 3 H2O + 1.75O2 + 19.74 N2

tp du
ou te
ith h
w yrig
𝐴 𝑚𝑎𝑖𝑟 4.76 × n × MW𝑎𝑖𝑟

ed op
50% excess air; = =
𝐹 𝑚𝑓𝑢𝑒𝑙 1 × MW𝑓𝑢𝑒𝑙

us is c
be al 𝑒𝑥𝑐𝑒𝑠𝑠 𝑒𝑥𝑐𝑒𝑠𝑠

4.76 × 5.25 × 29
ot eri

=
1 × 30
nn at
ca m

𝑘𝑔𝑎𝑖𝑟
It is

= 24.15 ൘𝑘𝑔
Th

𝑓𝑢𝑒𝑙
Example 3: Ethane is combusted with 50% excess air, which enters a combustion chamber at 25ºC.

d
ou
Assuming complete combustion, determine the a) air-fuel ratio and b) the percentage of carbon-dioxide by

. G
on V
volume in the product.

si .
is . V
m of
er Pr
C2H 6 + 1.5 × 3.5 (O2 + 3.76 N2) 2CO2 + 3H2O + 0.5 × 3.5 O2 + 1.5 × 3.5 × 3.76 N2

r p er
rio nd
tp du
ou te
C2H 6 + 5.25 (O2 + 3.76 N2) 2CO2 + 3 H2O + 1.75O2 + 19.74 N2

ith h
w yrig
ed op
𝐴 𝑚𝑎𝑖𝑟 4.76 × n × MW𝑎𝑖𝑟

us is c
50% excess air; = =
𝐹 𝑒𝑥𝑐𝑒𝑠𝑠
𝑚𝑓𝑢𝑒𝑙 1 × MW𝑓𝑢𝑒𝑙
𝑒𝑥𝑐𝑒𝑠𝑠
be al
ot eri

4.76 × 5.25 × 29
nn at

=
ca m

1 × 30
It is
Th

𝑘𝑔𝑎𝑖𝑟
= 24.15 ൘𝑘𝑔
𝑓𝑢𝑒𝑙
 NCO

d
2

ou
mole fraction of CO2 =
Ntotal (mix)

. G
on V
si .
is . V
NCO2 = 2

m of
Ntotal = 2 + 3 + 1.75 + 19.74

er Pr
= 26.49

r p er
rio nd
tp du
2
mole fraction of CO2 =

ou te
26.49

ith h
w yrig
= 0.0755 i.e. 7.5% CO2

ed op
us is c
be al
ot eri
nn at
ca m
It is
Th
BOOKS AND REFERENCES

d
ou
. G
on V
si .
is . V
1. Sukhatme S. P., Nayak J. K., Solar Energy: Principles of Thermal Collection and Storage, 3rd Ed., Tata

m of
er Pr
McGraw-Hill Education Pvt. Ltd., 2008.

r p er
rio nd
2. Twidell, J. and Tony W., Renewable Energy Resources, 2nd Ed., Taylor & Francis, 2006.

tp du
3. Khan B. H., Non-Conventional Energy Resources, 2nd Ed., Tata McGraw-Hill Education Pvt. Ltd., 2009.

ou te
ith h
4. Basu, P., Biomass Gasification, Pyrolysis and Torrefaction, Academic Press, Elsevier, 2013.

w yrig
5. S. R Turns, An Introduction to combustion concepts and Applications., 3rd Ed., MHEPL, 2012

ed op
us is c
be al
ot eri
nn at
ca m
It is
Th
 Th
It is
ca m
nn at
ot eri
be al
us is c
ed op
w yrig
ith h
ou te
tp du
rio nd
r p er
er Pr
m of
is . V
si .
on V
Thank you

. G
ou
For queries, feel free to contact at : [email protected]

d
[email protected]