Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Epoxy-Primer Tds Rev2

    Uploaded by

    antecristorodriguez
    Epoxy primers are two-component anti-corrosive coatings for metal surfaces. They dry to a hard, durable and chemically resistant film. Epoxy primers are used as primer coats for marine environments and industrial applications. They require a two-part mixing of epoxy base and hardener, have a pot life of 8 hours, and require 12-24 hours to recoat. Proper surface preparation including sandblasting is needed prior to application via brush, roller, or spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Epoxy-Primer Tds Rev2

    Uploaded by

    antecristorodriguez
    18 views2 pages
    Epoxy primers are two-component anti-corrosive coatings for metal surfaces. They dry to a hard, durable and chemically resistant film. Epoxy primers are used as primer coats for marine environments and industrial applications. They require a two-part mixing of epoxy base and hardener, have a pot life of 8 hours, and require 12-24 hours to recoat. Proper surface preparation including sandblasting is needed prior to application via brush, roller, or spray.

    Original Title

    Epoxy-primer Tds Rev2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Epoxy primers are two-component anti-corrosive coatings for metal surfaces. They dry to a hard, durable and chemically resistant film. Epoxy primers are used as primer coats for marine environments and industrial applications. They require a two-part mixing of epoxy base and hardener, have a pot life of 8 hours, and require 12-24 hours to recoat. Proper surface preparation including sandblasting is needed prior to application via brush, roller, or spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views2 pages

    Epoxy-Primer Tds Rev2

    Uploaded by

    antecristorodriguez
    Epoxy primers are two-component anti-corrosive coatings for metal surfaces. They dry to a hard, durable and chemically resistant film. Epoxy primers are used as primer coats for marine environments and industrial applications. They require a two-part mixing of epoxy base and hardener, have a pot life of 8 hours, and require 12-24 hours to recoat. Proper surface preparation including sandblasting is needed prior to application via brush, roller, or spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    EPOXY PRIMERS

    DESCRIPTION: REDUCTION:
    EPOXY PRIMERS are two component systems Epoxy 102 Reducer
    based on Epoxy Polyamide resins developed as Brush and roller: 0-5 %
    an excellent anti-corrosive protection for metal Conventional Spray: 20-25 %
    surfaces. It dries to a hard, durable film, chemical DRYING TIME:
    and abrasion resistant coating.
    Dry to recoat: 12-24 hours depending on weather
    USE: condition.
    As primer coat for marine environments and
    POT LIFE:
    numerous ranges of industrial application.
    8 hours, mix enough amount of paint for the day’s
    COLOR: work. Never put back excess mixture into original
    100 White can.
    160 Gray SURFACE PREPARATION:
    180 Black
    130 Red Oxide The surface must be dust-off clean, free of dirt or
    110 Zinc Chromate Yellow any adhesion barrier. Normal de-rusting,
    And other special colors degreasing/sanding preparation for metal.

    FINISH: For Marine and heavy maintenance, painting


    Flat steel structures:
    Sandblast to minimum grades SIS Sa 2.5
    APPLICATION TOOLS:
    COVERAGE:
    Approximately 20-25 sq.m. /gallon set @ 65-85
    microns DFT
    Brush Roller Spray PACKAGING:

    MIXING RATIO: Liter Set: ¾ Liter Part A and ¼ Liter Part B


    Epoxy Base (Part A): 3 Parts Gallon Set: 3 Liters Part A and 1 Liter Part B
    Epoxy Primer 111 Hardener (Part B): 1 Part
    Rev. 2
    SHELF LIFE:
    Part A: 3 years in unopened container
    Part B: 3 years in unopened container

    STORAGE & DISPOSAL:


    Keep container tightly sealed. Do not store above
    35 ⁰C. Must not be disposed together with
    household garbage. Do not allow product to reach
    sewage system. Disposal must be according to
    government regulations.

    LABEL ELEMENTS:
    PART A PART B

    Warning.Flammable liquid and vapour. May cause Warning: Highly flammable liquid and vapour. Causes
    genetic defects. May cause cancer. Causes skin skin and eye irritation. May be harmful in contact with
    irritation. May be harmful in contact with skin. Maybe skin. May be harmful if inhaled.
    harmful if inhaled
    Contains: Dimethylbenzene
    Contains: Naphtha (Petroleum), hydrodesulfurized
    Precaution: Keep out of the reach of children. Do not
    heavy, Dimethylbenzene
    empty into drains, dispose of this material and its
    Precaution: Avoid exposure – obtain special container to hazardous or special waste collection point.
    instructions before use. Keep locked up and out of the Wear suitable protective clothing and gloves. If
    reach of children. Do not empty into drains, dispose of swallowed, seek medical advice immediately and show
    this material and its container at hazardous or special this container or label.
    waste collection point. Wear suitable protective
    clothing, gloves, and eye/face protection. In case of
    accident or if you feel unwell, seek medical advice
    immediately (show the label where possible).
    Rev. 2

    You might also like