NEC Provisions On Installing Wiring Devices

Republic of the Philippines
Department of Education
Region IX, Zamboanga Peninsula
Schools Division of Zamboanga del Norte
LESSON PLAN IN COMPUTER SYSTEMS SERVICING
School LILOY NHS Grade Level 10/12
Teacher REYMOND P. SUMAYLO Strand/Section TLE
Date Learning Area CSS
Time Quarter 3RD
PART I. OBJECTIVES
The learner demonstrates an understanding of the underlying
Content Standards principles in installing wiring devices.
The learner independently installs wiring devices for floor and
Performance Standard ground fault current interrupter.
LO 2. Install the wiring devices for floor and ground fault current
Learning Competencies
interrupter based on PEC standards TLE_IAEI10WDIIIa-IVj-2
The learner should be able to
Learning Objective/s 1) cultivate a positive attitude towards continuous learning and
updating knowledge about NEC and wiring device installation
practices. (Affective)
2) understand the purpose and importance of NEC (National
Electrical Code) provisions related to wiring device installation.
(Cognitive)
3) properly install various types of wiring devices, such as
receptacles, switches, and circuit breakers, adhering to NEC
provisions and industry best practices. (Psychomotor)
PART II. CONTENT
Topic NEC Provisions on installing wiring devices
PART III. LEARNING RESOURCES
References LEARNING MATERIALS: Electrical Installation and Maintenance Learners

Manual Module 2 pp. 154-156
Laptop, Projector, Power Point Presentation, Reading materials,
Materials Diagram and Pictures
PART IV. LEARNING TASKS

Teaching Strategy: K-W-L Chart
ELICIT
Instructional Materials: Chart paper, markers
Anecdote 1: Share a personal story about a Filipino family experiencing
electrical issues due to improper installation of wiring devices.
Anecdote 2: Discuss the importance of electrical safety in the Filipino
culture and the potential dangers of faulty wiring.
Teaching Strategy: Role-Playing
ENGAGE
Instructional Materials: Props, electrical tools, safety gear
1) Idea: Divide the students into groups and assign each
group a specific scenario where they need to install wiring
devices according to NEC provisions. They will act out the
installation process and demonstrate proper safety
measures.
2) Idea: Conduct an interactive quiz using an online platform
where students can answer questions related to NEC
provisions on installing wiring devices. Provide immediate
feedback and encourage healthy competition among the
students.
Activity 1: Wiring Device Installation Simulation
EXPLORE Teaching Strategy: Cooperative Learning
Materials: Wiring devices, electrical tools, safety gear
Significance: This activity allows students to apply their
knowledge of NEC provisions in a hands-on manner, ensuring
proper installation of wiring devices.
Instructions:
1) Divide the students into pairs or small groups.
2) Provide each group with a set of wiring devices, electrical tools,
and safety gear.
3) Instruct the students to simulate the installation of wiring
devices according to NEC provisions, ensuring proper wiring
connections, grounding, and safety measures.
4) Use the rubric below to assess their performance:
Rubric:
Criteria:
- Proper wiring connections: 5 pts
- Correct grounding: 5 pts
- Adherence to safety measures: 5 pts
Assessment Questions:
1) What are the specific NEC provisions that need to be followed
when installing wiring devices?
2) How can improper installation of wiring devices affect electrical
safety?
3) Explain the importance of grounding in the installation of
wiring devices.
Teaching Strategy: Lecture and Discussion
EXPLAIN In this section, the teacher will explain and discuss the specific
provisions of NEC related to installing wiring devices. The teacher
will engage the students in a dialogue, asking questions to check
their understanding and providing clarifications when needed.
ELABORATE
Teaching Strategy: Problem-Based Learning

Task 1: Troubleshooting Electrical Issues
Materials: Electrical tools, safety gear, troubleshooting scenarios
Task 2: Designing an Electrical System for a Residential Building
Materials: Paper, pencils, ruler, internet access
These tasks will require students to apply their knowledge of NEC
provisions on installing wiring devices to solve real-life electrical
problems and design electrical systems for different scenarios.
The teacher will guide and provide feedback throughout the
process.
1. Which NEC article covers the requirements for installing wiring

EVALUATE devices?
A) 110.10
B) 210.12
C) 300.5
D) 404.24
Answer: A) 110.10
2. What is the minimum clearance required between the face of an

outlet box and the face of a receptacle installed in it?
A) 1.5 inches
B) 0.75 inches
C) 0.5 inches
D) 0.25 inches
Answer: B) 0.75 inches
3. Which type of receptacle is required to be installed in dwelling

unit bathrooms according to NEC?
A) Ground Fault Circuit Interrupter (GFCI)
B) Arc Fault Circuit Interrupter (AFCI)
C) Residual Current Device (RCD)
D) Surge Protection Device (SPD)
Answer: A) Ground Fault Circuit Interrupter (GFCI)
4. What is the maximum length of a flexible cord permitted to

extend from an outlet box?
A) 6 inches
B) 12 inches
C) 18 inches
D) 24 inches
Answer: B) 12 inches
5. Which NEC section requires the installation of a cover or

faceplate on all unused openings in boxes?
A) 110.14
B) 314.16
C) 300.4
D) 406.4
Answer: A) 110.14
EXTEND Assignment:
Research on Recent Updates in NEC Provisions
Guiding Overview: Instruct the students to research and write a
short essay discussing the recent updates in NEC provisions on
installing wiring devices. They should highlight any changes or
additions and explain the impact on electrical installations.
REMARKS
REFLECTION
A. No. of learners who earned 80% on the formative assessment
B. No. of learners who require additional activities for remediation

C. Did the remedial lessons work? No. of learners who have caught up
with the lesson
D. No. of learners who continue to require remediation
E. Which of my teaching strategies worked well? Why did these work?
F. What difficulties did I encounter which my principal or supervisor
can help me solve?
G. What innovation or localized materials did I use/discover which I
wish to share with other teachers?
Prepared by:
Liloy National High School

1.Check that the cables and components are properly connected. This is especially important
if you recently upgraded your computer. Open your computer and make sure that all the
cables, RAM chips, the video card, sound card, network card, and other components are all
securely attached to the motherboard.
2. Check the POST. POST stands for "Power On Self Test". This is part of a computer's
startup program that is used to diagnose the keyboard, random access memory (RAM), disk
drives and other hardware to make sure they are working properly. If the POST detects any
errors in the hardware, it will either display a text error message on the screen or a series of
short and long beeps.
*If an error message appears as you boot your computer, type the exact error message into a
Google search to find more information about the error. Use your mobile phone or another
computer, if needed. If you hear a series of beeps as your computer starts up, make a note of
the pattern and visit https://www.computerhope.com/beep.htm to see what error the pattern
indicates.
3. Check the load time of the operating system. The time it takes for an operating system to
load when a computer boots up greatly depends on the hardware of the computer is running.
If you notice your operating system takes significantly longer to load than it used to, this may
indicate a problem with your hard drive that is preventing your computer from retrieving
information from your hard drive.
4. Check for any graphics problems. If your computer is able to boot properly, but you notice
graphics problems, this may indicate driver failures or hardware failures with graphics cards.
If you suspect there might be a problem with your graphics card, you should first update your
graphics card drivers. If the problem still persists, you can download software to test your
graphics card.
5. Check for hardware problems. Many computer problems are caused by hardware failures
or problems with hardware drivers. Windows will usually notify you about devices that have
a problem. You can also use Device Manager to check the status of different hardware
devices. Double-click a category in the Device Manager to display all devices in that
category. Then double-click a specific device. Any errors with the device will be displayed in
the "Device Status" box under the "General" tab. Check all devices. Use the following steps
to open the Device Manager:
Click the Windows Start menu in the lower-left corner.
Type Control Panel.
Double-click the Control Panel in the Windows Start menu.
Click Hardware and Sound.
Click Device Manager below "Devices and Printers".
6. Check any newly installed software. Some software may require more resources than the
system can provide. Chances are that if a problem begins after software starts, the software is
causing it. If the problem appears directly upon startup, it may be caused by software that
starts automatically on boot. Uninstall any recently installed programs and see if the problem
continues. You may also want to limit the number of startup programs.
7. Check the RAM and CPU consumption. If your computer is choppy or running slow, it is
good practice to see if a program is consuming more resources than the computer can
provide. An easy way to check this is to use the Task Manager, right-click on the taskbar at
the bottom of the screen and click Task Manager. Click the Processes tab. Click CPU to
display a graph of the current CPU usage. Click Memory to see a graph of the RAM
consumption.
If your computer CPU graph is running at 80%-100% most of the time, you may be able to
upgrade your computer processor.
If your computer is using too much memory, close all unneeded programs and browser tabs
and see if your computer's performance improves. Limit the amount of multi-tasking you do
on your computer. If your computer doesn't have enough memory to do basic operations,
some computers allow you to purchase and install more RAM.
8. Listen to the computer. If the hard drive is scratching or making loud noises, shut off the
computer and have a professional diagnose the hard drive. Also, listen to the CPU fan. If the
fan is blowing hard, this could mean that your CPU is getting too hot because it is working
too hard.
If you suspect you have a damaged hard drive, be sure to backup all important data from the
drive immediately and shutdown your computer. Each time you boot up a computer with a
damaged hard drive, it will damage the hard drive further. If you are unable to backup your
data, remove your hard drive and take it to a professional for data recovery.
9. Run a virus and malware scan. Performance problems can be caused by malware on the
computer. Running a virus scan can unearth any problems. Use a trusted antivirus program
that is frequently updated, such as Norton, McAfee, or Malwarebytes.
10. Check for the problem in safe mode. As a last-ditch effort, check the problem in safe
mode. If the problem persists in safe mode, it is a fair bet that the operating system itself is to
blame. You may need to Reinstall Windows.

NEC Provisions On Installing Wiring Devices

Uploaded by

Copyright:

Available Formats

NEC Provisions On Installing Wiring Devices

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NEC Provisions On Installing Wiring Devices

Uploaded by

Copyright:

Available Formats

Republic of the Philippines

LESSON PLAN IN COMPUTER SYSTEMS SERVICING

School LILOY NHS Grade Level 10/12

Teacher REYMOND P. SUMAYLO Strand/Section TLE

Date Learning Area CSS

Time Quarter 3RD

PART II. CONTENT

Topic NEC Provisions on installing wiring devices

PART III. LEARNING RESOURCES

References LEARNING MATERIALS: Electrical Installation and Maintenance Learners

PART IV. LEARNING TASKS

Teaching Strategy: Problem-Based Learning

1. Which NEC article covers the requirements for installing wiring

2. What is the minimum clearance required between the face of an

Answer: B) 0.75 inches

3. Which type of receptacle is required to be installed in dwelling

Answer: A) Ground Fault Circuit Interrupter (GFCI)

4. What is the maximum length of a flexible cord permitted to

5. Which NEC section requires the installation of a cover or

B. No. of learners who require additional activities for remediation

Liloy National High School

You might also like