Scribd
Upload
112 views

2G Data Call Flow

The document provides an overview of GPRS network architecture and processes including MS attach and detach, temporary block flow (TBF), and PDP context. It describes: 1) The MS attach process where the SGSN updates the HLR with the new MS location and the HLR provides subscriber information to the SGSN. 2) The MS detach process where active PDP contexts are deactivated if the detach type is GPRS detach. 3) TBF which establishes a connection between an MS and BS to enable packet exchange, characterized by allocated PDCHs during data transfer before release. 4) The PDP context activation process between the MS, SGSN, and GGSN

Uploaded by

Diego Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

2G Data Call Flow

The document provides an overview of GPRS network architecture and processes including MS attach and detach, temporary block flow (TBF), and PDP context. It describes: 1) The MS attach process where the SGSN updates the HLR with the new MS location and the HLR provides subscriber information to the SGSN. 2) The MS detach process where active PDP contexts are deactivated if the detach type is GPRS detach. 3) TBF which establishes a connection between an MS and BS to enable packet exchange, characterized by allocated PDCHs during data transfer before release. 4) The PDP context activation process between the MS, SGSN, and GGSN

Uploaded by

Diego Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

Overview

 GPRS network architecture

 MS attach and Detach

 Temporary Block Flow

 PDP context
GPRS network architecture
 The 2G data flow process will be covered while
referring to GPRS network architecture.
 1.)MS sends an Attach
MS attach request with IMSI and
attach type.
 2.)SGSN updates the HLR
with the new location of
the MS by sending Update
GPRS location request.
 3.)HLR sends the
subscriber information of
the MS to SGSN through
Insert subscriber request.
 4.)SGSN acknowledges the
reception of insert
subscriber data request.
 5.)HLR acknowledges
completion of update
location to the SGSN.
 6.)SGSN accepts the Attach
request and sends Attach
request with a P_TMSI to
the MS.
MS detach  1.)MS sends Detach request
with detach type and switch off
parameter to the SGSN. Detach
type indicates which type of
detach is to be performed.
Switch off parameter indicates
whether the detach is due to a
switch off situation or not.
2.)If the detach type is GPRS
detach, the active PDP contexts
in the GGSNs regarding this
MS are deactivated by the
SGSN sending Delete PDP
context request to the GGSNs.
If switch off parameter
indicates that the detach is not
due to a switch off situation,
the SGSN sends a detach
Accept to the MS.

 Abis interface-connects the BTS with the BSC. On
the lower layers of the protocol stack, the
RLC/MAC(Radio Link Control/Medium Access
Control) protocol is used for the radio resource
management. The Logical link Control(LLC) protocol
is responsible for the framing of the user data packets
and signaling messages of the mobility management
and session management subsystems of the SGSN .The
Subnetwork –Dependent Convergence protocol
(SCDP) is responsible for framing IP user data to send
it over the radio network.
Temporary block flow
 Temporary Block Flow (TBF) is a connection established
between a Mobile Station (MS) and a Base Station (BS) to enable
packet exchanges between the BS and MS entities in GPRS
networks.
 In GPRS, TBF set-up is performed on a random access channel
(RACH) and requires some time. In a typical GPRS system, the
network needs to establish a downlink (DL) TBF to transfer data
in the DL direction and an uplink (UL) TBF to transfer data in
the UL direction. TBFs are typically short-lived and are generally
only active during data transfers.
 A TBF is characterized by one or several PDCHs allocated by the
network to an MS for the duration of the data transfer. Once the
data transfer is finished, the TBF is released.
 A TBF is characterized by one or several PDCHs allocated
by the network to an MS for the duration of the data
transfer. Once the data transfer is finished, the TBF is
released. A PDTCH is divided into 11 blocks, each block
holds one RLC data frame. Each block is allocated to a TBF
– owned by a mobile. Allocation and sharing of downlink
PDTCH is controlled by the network; the network will only
have to address the right mobile using TFI.
 When the mobile must send continuous data to the
network, it requests the establishment of an uplink TBF by
sending signaling information over CCCH(common
control channel) or PCCCH(Packet common control
channel). When the network wants to send data to the
mobile, it assigns a downlink TBF between the two
RR(Radio resource) entities.
 TBF can either be :

 Network initiated

 MS initiated
MS initiated
 One Phase Access, or
 Two Phase Access
Network initiated
MS initiated
 Mobile originated packet transfer is achieved by a two
phase process.

 During the first phase ,the MS sends a packet-channel


request message to the BSC through the Packet
Random Access Channel.(PRACH)
On receiving the message , the BSC replies with a packet
immediate assignment message in a AGCH(Access
Granted Channel).

During the second phase , the MS sends a packet-


resource request message to the BSC. This message
includes the description of the uplink resource
requirement. The BSC then responds with a packet –
resource assignment message.
 The Packet resource assignment message includes a
list of PDCHs that the MS may use for data
transmission, and an uplink State Flag (USF) for each
PDCH .The USF is a three-bit value that is used to
indicate the availability of radio block to the MS. The
MS then constantly monitors the downlink radio
blocks of the allocated PDCHs. If the MS detects its
USF in the downlink radio block header of the
corresponding PDCH, it may use the next uplink radio
block in this PDCH for data transfer.

 The MS may then activate Packet data protocol(PDP)


contexts via an activation signaling procedure.
PDP context
 The packet data protocol context is a data
structure present on both the serving GPRS
support node (SGSN) and the gateway GPRS
support node (GGSN) which contains the
subscriber's session information when the
subscriber has an active session. When a mobile
wants to use GPRS, it must first attach and then
activate a PDP context.
1. The MS sends an activate PDP context message to the serving SGSN

2. The SGSN may decide to perform standard security checks, i.e., ciphering
and authentication, IMSI check, IMEI check, P-TMSI real-location, etc.)

3.The SGSN validates the activated DP context request for PDP type, PDP
address, APN, etc. against the subscription.
4.)The GGSN uses APN to identify the packet data network
5.)The GGSN sends the create PDP context response to the
SGSN
6.)The SGSN inserts address parameters, i.e., NSAPI(Network
Service Access Point Identifier) and GGSN address and sends an
activate PDP context response message to the MS.
 After the transfer of packet data is complete , the MS
triggers a deactivation signaling procedure to remove
the data path in SGSN and GGSN.
 After the SGSN receives the request from the the MS,
the SGSN notifies the GGSN to deactivate the
associated data path . The MS is still in a ready state
after the Deactivation procedure and other active PDP
contexts identified by different NSAPIs are not
affected.
Thank you

You might also like