8 7 6 5 4 3 2 1

REVISIONS
THIS VIEW SHOWS DECK MOUNTING HOLES THAT INCORPORATE
Specifications : FA150KG(i)MR, LS150RLP AND LS2-150RLP DECK MOUNTING PATTERNS.
ZONE REV ECN DESCRIPTION DATE DRAWN APP'D

D 1170672 MOVED INSIDE R9 HOLES ON BASE RAIL 09-05-17 JJW

BOTTOM VIEW E 1284767 MOVED INSIDE R9 HOLES ON BASE RAIL 01-16-18 JJW
- Rated working load : 150 kg 458 F 1414046 ELD BOX, AIR PREP, FLANGES & TUBE GUARDS 18-11-2021 AG
- Lifting speed (with rated load) : 0 to 30 m/min at 6.3bar [18.0] DESIGN UPDATE
- Free air consumption : 0 to 2.5 m3/min (FA-150)
- Working pressure range : 5 to 7 bar
- Recommended rope diameter : 10 mm 184.5 DRUM 235.5
- Weight without rope : about 210 kg [7.3] CL [9.3]
- Working rope capacity : 54 m on 2 layers
D - Total rope storage capacity : 154 m on 5 layers D
GEOMET COATED LIFT SWIVEL RINGS

Standard Features / Equipment :

LIFT TO SHIFT
- Two independent auto brakes: an internal multidisc MANUAL THROTTLE
brake and external drum band brake.
- Stainless Steel throttle lever returns to off position

(LS-150)
and locks when released

(LS2-150)
(FA-150)

[21.0]
[22.0]

[20.0]
- High efficiency planetary gearing is inside drum for

533
560

508
better protection and minimum overall dimensions
- Overload protection device (torque limiter)
- Main air emergency stop
- Emergency lowering device
- Slack wire detector
- Upper & lower limit switch assembly mounted inside drum
- Assisting spooling device – for better rope winding
at no load. (Press roller)
- Stainless Steel Drum Guards
- Braided Stainless Steel Hoses
420
- Geomet coated fasteners [16.5]
C - Grooved drum (for wire rope 10 mm) C
(LS2-150) PRESS ROLLER ASSEMBLY
- Air prep package includes
Water separator - Filter – Regulator – Lubricator 449
- Sandblasting and offshore paint 290 µ [17.7]
- Installation and operation manual (LS-150)
- ABS and DNV type approved with CE certification
- Design temperature TD = -20° C 793.81 [31.3] VERTICAL TAKE OFF
ROPE ENTRY
177.2
[7.0] 300.5 [11.8]
DRUM LENGTH SCALE 0.250
WATER SEPARATOR

SLACK LINE
DETECTOR
REGULATOR
FILTER
LUBRICATOR
STAINLESS STEEL
AIR PREP LIMIT SWITCH ADJUSTMENT ACCESS
PIPE NIPPLES
GUARDING
B B
FLANGE DIAMETER

BARREL DIAMETER
450 [17.7]

342 [13.5]

614.5
[24.2]
MOTOR
GUARDING

STAINLESS STEEL
EMERGENCY
LOWERING On Request :
DEVICE

146.5
CONTROL BOX - 3.1b material traceability certificates according to

[5.8]
102.9 DIN 50049 (EN 10204) for load bearing parts
[4.1] - Witness test by Third Party (DNV, Lloyd’s, ABS,
4X 18 [.71] 500 BRASS 3-WAY VALVE etc)
[19.7] 271.4
WINCH MOUNTING AIR INLET AND
[10.7]
556 [21.9] EMERGENCY AIR
STAINLESS STEEL DRUM GUARDS NOTE:
WINCH MOUNTING INLET 3/4 NPT
EMERGENCY REMOVED IN VIEW CONFIGURATIONS THIS SHEET ARE FOR VERTICAL ROPE TAKE-OFF SEE
LOWERING THIS VIEW SHEET 2 FOR 30 DEGREE AND HORIZONTAL ROPE TAKE-OFF CONFIGURATIONS
A DEVICE A
606 [23.9] RESERVOIR MATERIAL WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED
BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS
DO NOT SCALE DRAWING
AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS. DRAWING CONFORMS TO FIRST ANGLE PROJECTION
Material PN:
PROPRIETARY NOTICE ISO 1101 DRAWN DATE
STANDARD TOLERANCES THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET CAD GENERATED DRAWING, GWM 08-13-13
R

INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS NO MANUAL REVISIONS ALLOWED NAME
ALL DIMENSIONS ARE IN
GENERAL ARRANGEMENT MAN
CHECKED DATE
GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION
MILLIMETERS AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE UNLESS OTHERWISE SPECIFIED:
[ INCHES (IF SHOWN)] AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY - REMOVE ALL BURRS AND SHARP CORNERS APPROVED DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES ON DIMENSIONS
TO BE IN ACCORDANCE
INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY
THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS
- WELD SYMBOLS TO BE IN ACCORDANCE
WITH NFE 52-109 1-2
AAJ 08/26/13
DRAWING TYPE
RIDER WINCH MR150K mdl.ptc_common_name

WITH ISO 2768 mH SIZE ESTIMATED WEIGHT PART NO. REVISION

Detail Drawing
A1 453.5 kilogram 45980208 F
EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET (KG UNLESS OTHERWISE SPECIFIED)
BREAK EDGES 0.3 A 45° INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO COPYRIGHT @ 2021 NOMENCLATURE
RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL Ingersoll Rand
mdl.param.value

Ingersoll-Rand Industrial Technologies

COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM. ALL RIGHTS RESERVED 45980208 SCALE
0.10 MODEL
MR150K SHEET
1 OF 2
For Internal Use : Model = 46894127 | ASSEM | V.1 | Aladdine Ghediri | 18-Nov-21 11:37:22 AM | Released Drawing = 45980208 | DRAW | F.3 | Aladdine Ghediri | 18-Nov-21 12:11:28 PM | Open

8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED F.3
 8 7 6 5 4 3 2 1

STAINLESS STEEL UPRIGHTS

HORIZONTAL ROPE TAKE-OFF

CONFIGURATION DETAILS

D D

BRAIDED STAINLESS STEEL HOSES WITH

STAINLESS STEEL OR BRASS FITTINGS
OPTIONAL:
SLACKLINE ARM MOUNTED
MANUAL ROPE GUIDE

STAINLESS STEEL OPTIONAL:

DRUM GUARDS OPERATOR
ORIENTATION
GUARDING
C (FOR USE WITH C
LEVER CONTROL
ONLY)

STAINLESS STEEL BASE RAILS

STAINLESS STEEL SLACKLINE ARMS

OPTIONAL:
PILOT
PENDANT
B CONTROL B

STAINLESS STEEL CROSSBARS

SCALE 0.300

A SHOWN IN VERTICAL ROPE A

TAKE-OFF CONFIGURATION
WITH OPTIONAL PENDANT
CONTROL
30 DEGREE ROPE TAKE-OFF
OPTIONAL: CONFIGURATION DETAILS
376mm [14.8] TALL PEDESTAL. PROPRIETARY NOTICE NAME
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET
GENERAL ARRANGEMENT MAN
PEDESTAL FEATURES STAINLESS STEEL FORMED SIDEPLATES WITH DECK INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND

RIDER WINCH MR150K

IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY

MOUNTING HOLES THAT INCORPORATE FA150KG(i)MR, LS150LRP AND

RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE
DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS
AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO. IT WILL (1)
SIZE DWG NO. REVISION
LS2-150RLP DECK MOUNTING PATTERNS.
F
NOT USE THE DRAWING OR ANY COPY THEREOF OR THE

A1
CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT

THESE DECK MOUNT PATTERNS ARE DETAILED ON SHEET 1

COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE
DRAWING OR THE CONFIDENTIAL OR TRADESECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN PART NO.
mdl.param.value 45980208
THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL SCALE NOMENCLATURE
COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM. 0.30 45980208 SHEET 2 OF 2

8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED F.3