LSL Catalogue 2013 GB

» 2013
» LSL-Motorradtechnik GmbH Release 17

D-47809 Krefeld
www.lsl.eu
contact content
Making good bikes perfect

cov
Gas is on the right!

The LSL catalogue has never been as thick as the new
2013 catalogue you just opened. Every year, we spend
a lot of time and dedication rebuilding our catalogue,
108 pages this time. In this edition you will find the
most comprehensive presentation yet of the diverse LSL
product range.
The presentation of the products has been revised and
tables show the various product groups, detailed by
color. A large summary table showcases accessories such
as handlebar controls and replacement foot pegs, listed
systematically and model-based.
The editorial pages have been given some attention as
well. A detailed article tells the exciting story of a tour
through the Pyrenees. And a separate section is de-
voted to the passionate production of Clubman
motorcycles.
Take some time to browse through this cat-
alogue and find inspiration for your own
2013 project.
Sincerely yours
Jochen Schmitz-Linkweiler
2
ver
» Content
About LSL 4
Toclick
A reachonthe
topic
choosed
will switch
chapter
to the
please
chapter.
click on the
Raise the Dust 6
different contents in the following list.
Project Bike Nuda Roadster 8
Build your Bike 10
Handlebars Accessories
X-Bar/Clamps 14 Lifter 67
7/8“ Bar/Clamps 17 Crash pads 68
1“ Bar/Clamps 22 Axle/Clutch sliders 75
Bar end weights/Grips 26 Model-specific table 76
Mirrors 30
Superbike Conversion Kits Lighting

Superbike handlebar kits 32 Urban head light 87
Head light 88
Head light bracket 89
Number plate hanger 90
Indicators/Rear light 91
Clip On Handlebars Clubman Bikes

Tour Match 42 The Story 92
Sport Match 44
Brake Engineering Chassis Geometry

Brake/Clutch levers 46 Triple tree kit 94
Brake fluid reservoir 48 Wheel rims 97
Stainless steel brake lines 50
Steering Damper Clubman Parts

Steering damper 52 Aluminium fender 98
Sprocket cover/Chain guard 99
Seats/Tail conversion 100
Gauges 102
Clubman accessories 104
Rear Sets Merchandise products 105

Index 107
2Slide rearsets 57
Standard rearsets 60
Foot pegs 64
Pillion peg bracket 66
Gear shifter/Rear brake lever66
contact 3
cont
» About LSL
LSL – behind this brand abbreviation stands a team of approval and going far beyond the legal standards
of hardcore specialists who dedicate all their energy and requirements!
and passion for the design and development of high
Proof of the cutting-edge nature of this is the fact
quality products and so have never compromised on
that the Department of Transportation adopted these
quality in over 25 years. The result is an increasing
standards as requirements for testing handlebars.
number of tech-savvy customers who passionately
enjoy individually customising their bikes. But in securing our international competitiveness,
we are not only consistently exploring promising new
LSL accessories are designed and drawn directly at the
avenues and top quality hand-picked German manu-
plant. Jochen Schmitz-Linkweiler, founder and head
facturing companies.
of the company is personally responsible for the prac-
tical implementation of the ideas of products right In order to be able to de-
to the production stage. Highly specialised manufac- velop and produce excep-
turing plants in Germany then produce the individual tional technical equip-
components out of machined metal, before they are ment, LSL does not just
brought on site in Krefeld and accurately measured, rely on the advice of oth-
meticulously assembled and shipped as LSL products ers, but is firmly commit-
across the world. ted to our own experience
and use in harsh operating
LSL is a small company. We are therefore able to build
conditions on the road.
networks to take advantage of technological innova-
tions and synergies. An example of this strategy is This year, the ground-
our successful cooperation with TÜV Rheinland. With work has been enriched
the support of their testing laboratory we were able by an intense experience
to develop our own production of extremely resilient for the first time in the
handlebars – officially certified by the ”TÜV.com“ seal off-road sector. On their
4
tent
Jochen Schmitz-Linkweiler
Director LSL
Vera Spiegelhauer
Export
Vera Neumann
Sales Germany
Nicole Heimer
Sales/Internet
Detlef Achternberg
Sales Manager
tour with screenwriter Uli Breé across the Pyrenees and you are guaranteed you will find a company that
on specially constructed heavy Triumph scramblers can advise you about all the details.
Jochen Schmitz-Linkweiler collected intensive Enduro
The development of a firm is growth. LSL is growing
experience, which could be reflected in concrete terms
slowly, product for product. We still take the time
in new products for the retro scrambler.
that is needed to achieve perfection in every detail.
You can read more in the full ”Raise the Dust“ report And we can afford this ”luxury“ at any time! For LSL
in the following pages. is a flawless-private company – and so is completely
independent of the short-term return expectations of
We also have an open ear for our customers, and lis-
profit-oriented investors.
ten to you carefully when you criticize our products.
Because you and your satisfaction are the highest Beyond pure technology we are always dealing with
measure of the sense and function of our accessories people. Job satisfaction results in the esteem of oth-
and feedback is often based on experiences which ers, but also fair dealings with each other. Then the
can provide valuable information for specific further whole LSL team pulls together for the benefit of our
development. customers.
The complexity of the technology requires a high level We are glad that we can live these principles in the
of education on our side and in sales. Therefore, we small niche of motorcycle technology and we thank
are consciously focused on training! Without exag- you for letting us make this possible by selecting and
geration, we can say that every LSL staff knows the using our products.
product inside out and is always in a position to assist
you competently. Visit one of our authorised partners
5
cont
Raise
the
Dust
Four Scramblers for a Hallelujah!

Burt Munro once said: „If you don’t take a risk everyday, they are my elected guys, my very own dream-team for
you might as well be born as a potato.“ And he was right. this crazy trip. Four guys between 41 and 62 on motor-
But we still are fools. Risks and adventures are relative, cycles, which are - like themselves – totally inappro-
although straightforward risks can be really adventurous. priate for this hard roadbook-rallye. Four Scramblers
for a Hallelujah! The excitement was surprisingly low.
My friend Helmut popped the following idea into my
head: The “Transpyrenäica, a roadbook-rallye across the After using all possible mental tricks, legal drugs,
Pyrenees from the Mediterranean Sea to the Atlantic please to the honour of men, senseless promises,
Ocean, approximately 1,300 kilometres off-road. skilled belittlement and obedient time shifting, I got
Difficulty is easy to relentless. Normally you ride this them and the madness could start! Triumph Germany
with light-weighted trail-bikes (approx. 120 kilograms). gave us 4 Triumph Scramblers which we immediately
But as a long-time trail-bike-rider, I knew that this would started to customize. We wanted to adapt the 4 mo-
be way too easy for me. And when you are in the middle torcycles individually for the persons needs and so 4
of hopping into midlife crisis then you need to set your- different motorcycles began to form. After half a year
self higher goals. At the same time JvB-moto and LSL of motorcycle tuning and body-shaping we finally star-
constructed the “Tridays-Rumbler”, based on a Triumph ted in May 2012.Logistics was an adventure itself on
Scrambler for the Tridays, the event that I invented and this journey. Imagine it like this, when our film crew
organize. As I passed on my suggestion to ride this pro- starts to roll: you need a full transporter only for the
motion-bike, which was adapted with the finest Öhlins- equipment, on your motorcycle are permanently two
parts, 1,300 kilometers off-road through the Spanish small cameras, the director and camera operator fol-
dirt – before the official presentation – Jens vom Brauck low you on their light-weighed trail-bikes, another
(JvB-moto) and Jochen Schmitz-Linkweiler (LSL) weren’t camera-operator sits with a guide, a tone operator
really that happy. and the head of production in a jeep and meet you
at agreed destinations. You could say an organised
But it’s never enough. When I told my plan to a befrien-
adventure. But way better to say it: organised chaos!
ded director, he said, that this was exactly the kind of
But you get the chance to practise a lot. For every
thing he was planning for a new TV-show on ServusTV:
different perspective you need to do the exact thing
some crazy guys who got themselves into tough situa-
over and over. And after a hard, long 10 to 12 hour
tions. Good idea!
ride through mountains you still need to give state-
So I only had to find a bunch of crazy guys to make ments for the camera, when you long for nothing more
their lives harder. That’s why I told Jens vom Brauck, than a hot shower. A real adventure, don’t you think?
Jochen Schmitz-Linkweiler and Wim Peters (Öhlins) my Might sound strange. But that’s really what it was. It
exciting idea: we would ride on 220 kilogram Triumph- was really awesome. But it was also really cold and
Scramblers on the legendary “Transpyrenäica” – and wet and hot and sometime unbearable. And s ometimes
6
tent
„Due to intensive studies of the Scrambler‘s off-road capabilities ahead

of the tour, we were able to design some highly effective accessories
that “saved our asses” a few times traversing rock fields and knee-deep
mud. These included a more effective brake pump protection for the
low-seated rear brake pump, wear-resistant, non-slip foot pegs, short,
adjustable hand levers for clutch and brake; and simple but useful de-
tails such as a re-positioning kit for the rectifier unit and the horn.“
even cosy. And unforgettable. And it even hailed. If

» Scrambler Trophy you travel to Spain in May, you expect everything
except snow and cold. But if you fight yourself up to
2,000 metres into the mountains, then this can hap-
· LSL-Triple tree with full adjustable 43mm fork with
150mm travel and dust protecting gaiters pen even in Spain, Andorra or France. But we longed
· CNC-machined caliper and stainless steel brake for an adventure and we got one. And only God knows
hose, CNC-machined brake fluid reservoir why, humans think that a real adventure also needs
· Scrambler Standard brake disc a bit of suffering. That’s why we suffered. Sometimes
· Spoked front wheel with 2.50x19 aluminium rim, with pride sometimes not that grand with a big glass
with Pirelli tyre 110/80-19 Rally of red wine in our hand. We passed amazing areas, we
· Öhlins-shocks S 36P with piggy back, stroke 107mm crossed grand mountains and sometimes we held our
· Spoked rear wheel with 3.50x17 aluminium rim, breaths for this amazing beauty of nature around us
with Pirelli tyre 130/90-17 MT 21 in the Pyrenees. Somehow this area reminds me of the
· LSL X01 X-Bar with high bar clamps (+ 25mm) Dolomites – except the cars. Because even if you get
· Adjustable brake- and clutch-lever lost on these streets, you are as alone as you are in
· LSL head lamp brackets with Scrambler head lamp, the open country. And thanks to funds of the European
machined Instrument bracket Union the streets are in best shape.
· Ignition lock relocation kit
· CNC-machined LSL-foot pegs Extreme When we finally arrived at the Atlantic Ocean we lost a
· Short Scrambler solo seat few pounds, were really dirty and became really good
· Aluminium rear fender with rubber mounting plate
friends. We had an idea and didn’t stop in just having
· Blaze winkers with tail light function
one. After half a year of preparations we finally lived our
adventure. Sitting in front of the TV and watching foot-
· CNC-machined sprocket cover and aluminium chain
guard ball can be nice as well, but such a trip will be forever in
· Rear master cylinder protection shield your head. Most of the football games will be forgotten.
· Alu sprocket 49 teeth, side stand elongation 30mm
· ARROWS 2in1-exhaust system
· Road book box with digital Rally-Multimeter
Uli Brée
contact 7
cont
» Project Bike Nuda Roadster
8
tent
! Geometry:
rake: 64,7°, trail 101mm

wheel base: 1478mm
wheel dimension: 3.50 x 17 spoke, tubeless
5.50 x 17 spoke, tubeless
tyres: Bridgestone S 20 120/70ZR17
Bridgestone S 20 120/70ZR17
seat height: 850mm
weight: filled up 189kg
The idea was fixed – a Classic Roadster on basis of the

new, edgy Nuda should be possible.
Parallel-Twin and classical steel tube frame offer a
perfect basis although Husqvarna did everything pos-
sible to hide this potential.
With this Nuda Roadster LSL presents a motorcycle
that emerges with classical charisma and further on
offers more handling and road performance.
With the round single head lamp, classic seat and
fenders LSL work with established elements out of
long motorcycle history.
By the use of light spoke wheels and 60mm less fork
length they realise better suspension response and
more sporty chassis characteristic. The strong LSL
X-Bar and higher positioned foot pegs support the
additional road dynamic.
During spring 2013 LSL plans to develope a ready to
mount conversion kit on basis of the prototype parts.
Other accessories out of the LSL program like the han-
dlebar, head lamp brackets or adjustable foot pegs are
available right now.
9
cont
5 4 2
8 9 13
10
tent
» Speed Triple Special – Build your bike
Mounting different LSL parts changes every motorcycle into Lenker/handlebar Page
an individual special bike. 1 Gonia bar end mirror 30
2 handlebar grips 28
Let us inspire you! 3 X-Bar superbike handlebar, 15
carbon covered, matt
3 clamps for 28,6mm 16
4 brake box 48
4 brake box mounting kit 49
5 brake lever 46
6 clutch lever 46
Scheinwerfer/head light
7 Urban head light kit 87
Sturzprotektion/crash protection
8 axle crash pad 71
9 crash pads 69
Fußrastenanlage/rear set
10 2Slide rear set 58
11 passengers peg bracket 66
11 racing foot pegs 64
Body Art
12 number plate hanger 90
13 sprocket cover 101
12
10 11
contact 11
cont
12
tent
» Get a Grip
Since our founding, the development and production of

handlebars has been the core competence of the com-
pany LSL (Lenksysteme [steering systems] Schmitz-
Linkweiler).
With a new demand for handlebars for extremely fast
bikes with deceleration of more than one g, LSL has fo-
cused on the proper design and production of tubular
handlebars in cooperation with the Rhineland Technical
Inspection Agency (TÜV-Rheinland). Riding tests in the
early 1990s rendered single loads of up to 80kg on the
two handlebar ends and led to a complete redesign of
the bending strength of LSL handlebars.
The standard created as a result of this analysis, to which
every LSL handlebar is held, considerably exceeds the
» LSL-Performance:
required minimum standard, and has since raised the
benchmark for testing custom handlebars. TÜV.com is a seal of quality, offered by TÜV
in Germany, and confirms the outstanding
LSL handlebars are made of aluminum and steel for 7/8”
properties of the product.
and 1” handlebar controls. All handlebars are tested to
meet LSL’s own high standards. The LSL aluminium handlebars has been
awarded the TÜV.com seal by surpassing
Special tapered handlebars (1 1/8” in the center, 7/8” on
German regulations.
each end) are now also produced using a specific sand-
wich-method with an aluminum core and a carbon shell. All details on website www.tuv.com/de.
Anodised, chrome plated, painted, carbon covered, polished, mat- The LSL in-house testing standard is the benchmark for testing
te, bead blasted – the choice is yours! handlebars under real conditions, see the diagram above.
Diagram: TÜV Kraftfahrt, Köln
Handlebar clamps
You will find individual solutions to optimise handlebar position in the tables for the different handlebar types.
Handlebar clamps change the height of the Handlebar risers are mounted between the RiseUp risers bring the handlebar position
OEM clamps (H) from -45 to +25mm (mode OEM clamps to raise the handlebar position up to 35mm higher and 16mm toward the
specific, see table). The original threaded bolt by up to 35mm (H). rider. Fits all handlebar clamps for 7/8“
holes are used to retain a standard, rubber handlebars with 32-35mm hole depth and
mounting. 38mm for the Ducati Monster.
contact 13
cont
» X-Bar 1 1/8“ to 7/8“
! Please choose corresponding handle-

bar clamps in table on page 16!
X-Bar
The X-Bar handlebars set themselves apart by their » LSL-Performance:
exceptional stiffness and are made of high-strength
aluminium. The diameter of 1 1/8“ in the terminal ·
Twice the bending resistance
area which tapers towards the bar ends, doubles the compared with standard bars
resistance to bending. The handlebars are less sprin- ·
Manufactured in high-strength alloy
gy and offer more safety reserves even under extreme 2014 T6, anodised in bright colours
loads (see load simulation).
·
Fully machined clamps for several
In production since 2012, X-Bar handlebars sheathed naked bikes
in carbon fiber provide the same rigidity at even less
weight. They display the characteristic carbon look
and are now available in a distinguished matte finish.
22mm
X-Bar
Carbon fibre casing

As already known in the high-tech bicycle sector, LSL
is now offering a version of the X-Bar handlebar with
genuine carbon fibre casing. Here the aluminium in-
ner tube is coated with a sleeve of carbon fibre. This
Manufacturing is absolute precision work. Only in this
blastedwich achieves a further reduced weight with
way can the required tolerances of a motorcycle han-
the same rigidity of the handlebar.
dlebar be observed. During the assembly of these
handlebars great attention has to be paid so that the
transparent outer layer of the carbon fibre material
is not damaged.
LSL handlebars are used with many exclusive modifi-
cation projects. This is due to the high quality
standards as well as to the extensive fin-
ishing options – such as on the Walzwerk
V-Max, with which Marcus Walz appeared at the last
Milan expo. In the same vein CR&S have equipped DUU
models with LSL X-Bars.
14
tent
The LSL Superbike handlebar is shown

in grey as reference. !
Drag Bar
Dragster handlebar for heavy custom bikes.
95 835
Type XD2
Cross Bar
Will be the choice for the streetfighter and
motocross rider.
90 805
Type X00
75
» also Carbon covered available
Superbike
The classic Superbike shape – handy
and comfortable.
150 740
Type XN1
60
155 760
Type X01
70
» also Carbon covered available
Naked Bike
The favourit for naked bikes.
175 790
Type X02
100
Tour Bar
The comfortable strong bar for
tourers.
200 780
Type XB3
85
contact 15
cont
» X-Bar 1 1/8“ to 7/8“
! X-Bar Colour
silver
Surface
bead blasted
anthracite bead blasted » Clamps for 1 1/8“

black bead blasted Model Type Year ∆ Silver No. Black No. EUR
gold polished Aprilia

Shiver 750 RA 08- +15 127A019SI 127A019SW 89,95
blue polished Dorsoduro SM 08- - 127A019SI 127A019SW 89,95
Tuono RR 06-10 -2 127X070SI 127X070SW 89,95
carbon glossy
RSV4 Tuono TY 11- - 127A024SI 127A024SW 89,95
carbon matte BMW
R1200R R1ST 07-11 +25 127B042SI 127B042SW 89,95
Buell
» X-Bar XB-9S/12S XB1 all +25 127BU05SI 127BU05SW 99,95
Ducati
Type Colour Surface Item No. EUR Monster696/1100 M5 08- +10 127D036SI 127D036SW 89,95
Multistrada 1200 A2 10- +5 127D040SI 127D040SW 89,95
Drag Bar XD2
Honda
XD2 black bead blasted 128AXD2SW 89,95
Hornet 600 PC41 07- +25 127RK25SI 127RK25SW 69,95
XD2 anthracite bead blasted 128AXD2AN 89,95
CBF 600S PC43 08- +15 127RK25SI 127RK25SW 69,95
XD2 silver bead blasted 128AXD2SI 89,95
CBF 1000 SC58 06- +30 127T015SI 127T015SW 89,95
Cross Bar X00
CBF 1000F SC64 10- +5 127RK25SI 127RK25SW 89,95
X00 black bead blasted 128AX00SW 89,95
CB 1000R SC60 08- +25 127RK25SI 127RK25SW 69,95
X00 blue polished 128AX00BL 89,95
CB 1300 SC54 03- +10 127H101SI 127H101SW 89,95
X00 gold polished 128AX00GO 89,95
Husqvarna
X00 anthracite bead blasted 128AX00AN 89,95
Nuda 900 A7 12- -18 127HU02SI 127HU02SW 89,95
X00 silver bead blasted 128AX00SI 89,95
Kawasaki
X00 carbon covered glossy 128CX00CA 139,95
ER 6N ER650C 09- +15 127K133SI 127K133SW 89,95
X00 carbon covered matte 128CX00CM 139,95
ER 6f EX650E 12- +15 127K141SI 127K141SW 89,95
Superbike flat XN1
Z 750 ZR750J/L/M 04- +15 127K102SI 127K102SW 89,95
XN1 black bead blasted 128AXN1SW 89,95
Z 1000 ZRT00A/B 03-09 +15 127K102SI 127K102SW 89,95
XN1 anthracite bead blasted 128AXN1AN 89,95
ZRX1100/1200 ZRT10C/20A all +20 127K082SI 127K082SW 89,95
XN1 gold bead blasted 128AXN1GO 89,95
XN1 blue polished 128AXN1BL 89,95 Moto Guzzi
XN1 silver bead blasted 128AXN1SI 89,95 Griso 1100 LS 06- -10 127M017SI 127M017SW 89,95
Superbike X01 V11 KR - 127M013SI 127M013SW 89,95
X01 black bead blasted 128AX01SW 89,95 Suzuki
X01 blue polished 128AX01BL 89,95 GSR 600 WVB9 07-10 +25 127RK25SI 127RK25SW 69,95
X01 gold polished 128AX01GO 89,95 GSF 600 Band. GN77B/WVA8 95-04 +25 127RK25SI 127RK25SW 69,95
X01 anthracite bead blasted 128AX01AN 89,95 DL 650 WVB1 04- +25 127RK25SI 127RK25SW 69,95
X01 silver bead blasted 128AX01SI 89,95 GSF 650 Band. WVCJ 07- +10 127X045SI 127X045SW 89,95
X01 carbon covered glossy 128CX01CA 139,95 SV 650N WVBY 03-08 +25 127RK25SI 127RK25SW 69,95
X01 carbon covered matte 128CX01CM 139,95 SFV 650 Gladius WVCX 09- +25 127RK25SI 127RK25SW 69,95
Naked Bike X02 GSR 750 C5 11- +10 127S125SI 127S125SW 89,95
X02 black bead blasted 128AX02SW 89,95 SV1000N WVBX 03- +3 127S095SI 127S095SW 89,95
X02 silver bead blasted 128AX02SI 89,95 GSF 1200 Band. GV75A/WVA9 all +5 127X080SI 127X080SW 89,95
Tour Bar XB3 GSF 1250 Band. WVCH 07- +12 127X065SI 127X065SW 89,95
XB3 black bead blasted 128AXB3SW 89,95 GSX1250F WVCH 10- +10 127S125SI 127S125SW 89,95
XB3 silver bead blasted 128AXB3SI 89,95 B-King WVCR 07- -8 127S119SI 127S119SW 89,95
GSX 1400 WVBN all +10 127S089SI 127S089SW 89,95
Triumph
Street Tr. 675 D67LD 07-12 +10 127X080SI 127X080SW 89,95
» RiseUp Clamps for 1 1/8“ Bonneville 986MF 08- +10 127T044SI 127T044SW 89,95
Model Closer Higher Colour Item No. EUR Scrambler 986MG 06- +10 127T044SI 127T044SW 89,95
Bonneville 986MF 08- +35 127T044/HSI 127T044/HSW 99,95
X-Bar Scrambler 986MG 06- +35 127T044/HSI 127T044/HSW 99,95
universal 16mm 28mm black 127RI28SW 79,95 Speed Triple T509 97-04 +3 127T015SI 127T015SW 89,95
universal 16mm 28mm silver 127RI28SI 79,95 Speed Triple 955i/595N 97-04 +3 127T015SI 127T015SW 89,95
Speed Tr. 1050 515NJ 05-11 +3 127T015SI 127T015SW 89,95
Speed Tr. 1050 515NV 11- +11 127T040SI 127T040SW 89,95
Tiger 1050 115NG 07-11 +11 127T040SI 127T040SW 89,95
» Distance Clamps for 1 1/8“ Yamaha
Model Raise Colour Item No. EUR XJ6 Diversion RJ19 09- -10 127X075SI 127X075SW 89,95
FZ6 RJ07/RJ14 03- +25 127RK25SI 127RK25SW 69,95
X-Bar FZ8/Fazer RN25 10- +20 127X075SI 127X075SW 89,95
Ducati +30mm silver 127RD30SI 35,95 FZ1 RN16 06- -30 127X080SI 127X080SW 89,95
Ducati +30mm black 127RD30SW 35,95 FZS 1000 Fazer RN06/14 -05 -5 127Y086SI 127Y086SW 89,95
Speed Triple +25mm silver 127RD25T 39,95 BT1100 Bulldog RP05 all -50 127X080SI 127X080SW 89,95
XJR 1200/1300 all all +20 127X040SI 127X040SW 89,95
Universal Adapter 22mm MT 01 RP12/18 all -13 127Y101SI 127Y101SW 89,95
fits 22mm OEM bracket +25 127RK25SI 127RK25SW 69,95 MT 01 RP12/18 all -38 127Y101/LSI 127Y101/LSW 89,95
16
tent
» Standard 7/8“
» Aluminium handlebars
! Alu. 7/8“ Colour Surface Order Info
LSL takes extreme care in the manufacture of its alu-
black polished Item No. + ..SW minium bars. After tests together with an university
we decided on a specially made aluminium raw material
blue polished Item No. + ..BL that resists a bending load by more than 60% over the
required German standard. At the same time its high
red polished Item No. + ..RT tensile quality leads to flexing but never breaking.
gold polished Item No. + ..GO

For this quality LSL Superbike handlebars have achie-
ved TÜV.com (see LSL Performance page 13).
titan polished Item No. + ..TI LSL aluminium bars have 7/8“ outer diameter and
4.0mm wall thickness (14mm inside). The bars come
silver polished Item No. + ..SI
high-polished in strong anodised colours.
nickel polished Item No. + ..NI
anthracite bead blasted Item No. + ..MA
black matte bead blasted Item No. + ..MB

» Steel handlebars
The classic handelbar made of high strength steel.
External diameter 7/8“, material thickness 2.0mm,
chromed or black coated available.
contact 17
cont
» Standard 7/8“
Drag Bar
The classic one for Dragster and Streetfighter.
95 765
Type D1
100 835
Type D2
Sport-Tourer
The sportive bar for dynamic drivers.
115 690
Type S1
40
220 700
Type S2
80
Street Bar
The wide one for wheelies and
other funny rides.
90 820
Type 00
55
115 850
Type 04
70
Superbike-Lenker
Easy to handle, specially for superbikes.
145 740
Type N1 Dokumentenart: Dokumentenstatus:
55
Titel/Benennung: Zeichnungsnummer:
Lenker Typ A04
122L004 1/1
150 760
Type 01
65
18
tent
Der LSL
LSL
grey
Superbike-Lenker
Superbike-bar
Referenz
ist in
is shown
in Grau dargestellt.
as reference
als
!
Naked Bike-Lenker
The favourit for naked bikes
170 790
Type 02
100
Touren-Lenker
Take a straight seat like on Z 900.
Type 03 210 800

140
ø : 22,0mm
Flat Track
The strong and wide one, not just for
blasted- or dirt-tracks. Often mounted on
retro bikes.
185 835
Type 14
110
BMW-Lenker
The one for BMW.
For BMW motocycles LSL has developed

the handlebar type M1. For mounting 145 690
the original bar end weights (450g each)
55
it is equipped with welded threads.

A 10mm slot between the clamps allwos
to install the original heat grips as well.
The handlebar is made of steel and is pain-
ted silver matte.
Handlebar diameter: 22,0mm
contact 19
cont
» Standard Handlebar 7/8“

Type Material Colour Surface Item No. EUR Type Material Colour Surface Item No. EUR
Drag Bar Flat Track

LD1 steel chrome 123LD01CH 45,95 L14 Steel chrome 123L014CH 59,95
Drag Bar wide Dokumentenart: Dokumentenstatus:
Freigabe nicht erteilt
L14 Steel black painted 123L014SW Dokumentenart:
59,95
Dokumentenstatus:
BMW
Fertigungszeichnung Fertigungszeichnung
LD2 steel chrome 123LD02CH 45,95

Titel/Benennung: Zeichnungsnummer: Titel/Benennung: Zeichnungsnummer:
Lenker Typ A01 122A001 Lenker Typ A01 122A001
A 12.06.12 1/1 A 12.06.12 1/1
LD2 steel black painted 123LD02SW 45,95 LMB1 Steel silver painted 123LMB1SI 89,95
AD2 aluminium black polished 122AD02SW 49,95
AD2 aluminium blue polished 122AD02BL 49,95
AD2 aluminium titan polished 122AD02TI 49,95
AD2 aluminium
Sport-Tourer
silver polished 122AD02SI 49,95
» Clamps 7/8“
LS1 steel chrome 123LS01CH 45,95 Model Type Year ∆ Item No. EUR
LS1 steel black painted 123LS01SW 45,95
Honda
AS1 aluminium black polished 122AS01SW 49,95
CBF 1000 SC 58 06- +25mm 121H111 79,95
AS1 aluminium gold polished 122AS01GO 49,95
AS1 aluminium titan polished 122AS01TI 49,95
Kawasaki
ER 6f EX650E 12- +8mm 121K141 79,95
AS1 aluminium silver polished 122AS01SI 49,95
Z 750 ZR750J 04-06 +20mm 121K102 79,95
Brooks Bar
Z 750 ZR750L 07- +20mm 121K102 79,95
LS2 steel black painted 123LS02SW 59,95
Z 1000 ZRT00A 03-06 +20mm 121K102 79,95
Street Bar
Z 1000 ZRT00B 07-09 +20mm 121K102 79,95
L00 steel chrome 123L000CH 45,95
Moto Guzzi
L00 steel black painted 123L000SW 45,95
V11 Sport KR - 121M013 79,95
A00 aluminium black polished 122A000SW 49,95
V7 LW 08- +11mm 121M018 79,95
A00 aluminium blue polished 122A000BL 49,95
A00 aluminium red polished 122A000RT 49,95
Suzuki
GS 500 GM51B 89-00 - 121S036 69,95
A00 aluminium gold polished 122A000GO 49,95
GSF 1200 Bandit GV75A -99 +10mm 121S064 79,95
A00 aluminium titan polished 122A000TI 49,95
GSF 1200 Bandit WVA9 00- +10mm 121S064 79,95
A00 aluminium silver polished 122A000SI 49,95
A00 aluminium black bead blasted 122A000MB 49,95
Triumph
Street Triple 675 D67LD 07- +3mm 121T041 79,95
Street Bar high
Bonneville, Gußrad 986MF 08- +3mm 121T044 79,95
Scrambler 986MG 06- +3mm 121T044 79,95
Bonneville, Gußrad 986MF 08- +15mm 121T044/H 79,95
A04 aluminium gold polished 122A04GO 54,95
Scrambler 986MG 06- +15mm 121T044/H 79,95
A04 aluminium titan polished 122A04TI 54,95
Thunderbird Sport T309RT/RD all -30mm 121T020 79,95
A04 aluminium silver polished 122A04SI 54,95
Speed Triple T509 97-01 -5mm 121T015 79,95
A04 aluminium nickel polished 122A04NI 54,95
Speed Triple 595N 02-04 -5mm 121T015 79,95
Superbike flat
Speed Triple 1050 515NJ 05-07 -5mm 121T015 79,95
LN1 steel chrome 123LN01CH 45,95
Yamaha
LN1 steel black painted 123LN01SW 45,95
XJ6 Diversion RJ19 09- -25mm 121Y121 79,95
AN1 aluminium black polished 122AN01SW 49,95
FZS 1000 Fazer RN06 -05 -20mm 121Y086 79,95
AN1 aluminium blue polished 122AN01BL 49,95
FZ1 RN16 06- -25mm 121S064 79,95
AN1 aluminium red polished 122AN01RT 49,95
BT 1100 Bulldog RP05 all -45mm 121Y091 79,95
AN1 aluminium gold polished 122AN01GO 49,95
XJR 1200 4PU all +5mm 121Y073 69,95
AN1 aluminium titan polished 122AN01TI 49,95
XJR 1300 RP02/6/10/19 all +5mm 121Y073 69,95
AN1 aluminium silver polished 122AN01SI 49,95
Universal Klemmböcke/universal handlebar clamps
AN1 aluminium nickel polished 122AN01NI 49,95
Schrauben/screws 60mm black 38mm 121KL60SW 79,95
AN1 aluminium anthracite bead blasted 122AN01MA 49,95
Schrauben/screws 60mm silver 38mm 121KL60SI 79,95
AN1 aluminium black bead blasted 122AN01MB 49,95
Superbike
L01 steel chrome 123L001CH 45,95
A01 aluminium black polished 122A001SW 49,95 » RiseUp Clamps 7/8“
Model Closer Higher Colour Item No. EUR
A01 aluminium red polished 122A001RT 49,95
A01 aluminium gold polished 122A001GO 49,95 22,2mm Standard
A01 aluminium titan polished 122A001TI 49,95 universal 16mm 25mm black 121RI25SW 59,95
A01 aluminium silver polished 122A001SI 49,95 universal 16mm 25mm silver 121RI25SI 59,95
A01 aluminium nickel polished 122A001NI 49,95 universal 16mm 35mm black 121RI01SW 59,95
A01 aluminium anthracite bead blasted 122A001MA 49,95 universal 16mm 35mm silver 121RI01SI 59,95
A01 aluminium black bead blasted 122A001MB 49,95 Ducati 16mm 30mm silver 121RI30DSI 59,95
Superbike flat, 22,0mm (such as Ducati and Moto Guzzi)
LN1 steel chrome 123LN01CH/22 35,95
Naked Bike
L02 steel chrome 123L002CH 49,95 » Distance Clamps 7/8“
Model Raise Colour Item No. EUR
A02 aluminium blue polished 122A002BL 54,95 22,2mm Standard
A02 aluminium gold polished 122A002GO 54,95 universal 15mm silver 121RD15SI 25,95
A02 aluminium titan polished 122A002TI 54,95 universal 15mm black 121RD15SW 25,95
A02 aluminium silver polished 122A002SI 54,95 universal 25mm silver 121RD25SI 25,95
Tour-Bar universal 25mm black 121RD25SW 25,95
L03 steel chrome 123L003CH 49,95 universal 35mm silber 121RD35SI 25,95
20
tent
Drilling jigs – for the professional tool set. In order

to ensure the firm seating of the switch assy, the
holes for the original handlebar twist pins must be
transferred to the new handlebar. With the LSL drill
template you can easily transfer the distance dimen-
sion of the hole and while drilling it is fed through
the bushing. This template is designed for 5mm Ø
drill bits.
Handlebar Pre-Drilled Ø
Ø Pre-Drilled Item No. EUR
EUR
Bohrschablone/drill template
22,2mm/X-Bar 5mm 902DT01 29,95
25,4mm (1“) 5mm 902DT02 34,95
contact 21
cont
» Ø 25,4mm (1“)
For a long now LSL offers strong made handlebars in Getting the only producer in Europe, LSL enlarged this
1-inch diameter in different shapes. Handlebars in this handlebar program by versions made out of high tensile
dimension are typically mounted on Harleys and new aluminium. Different shapes from sports bar to wide Flat
retro Triumph models. Track style are made in this craftsmanship.
All steel bars are made out of precision steel tube Differing wall thickness, which is stronger in the area of
with 3mm wall thickness. This lay-out offers strong clamping and getting finer towards the grips, offers per-
bending resistance and less vibration for heavy and fect bending resistance also these bars are made out of
wide Chopper bars. aluminium. Surface is either high polished with strong
colours or bead blasted in silver or black.
To install the cables the aluminium

handlebars are optonally available
with a slot.
22
tent
LSL Roadster is shown in

grey as reference !
Drag Bar
The classic one for dragster, also in
aluminium available.
Type D1
Type D2
Clubman
The consequentially one for sportive
driving on Triumph twins.
Type S1
Street Bar
Cool and wide, offers extreme
driving plasure.
Type 00
Roadster
For excellent handling.
Type 01
Flat Track
Absolute control,
not just on the flat track.
Type 14
contact 23
cont
» Ø 25,4mm (1“)
! LSL Roadster is shown in grey

as reference
Wide Bar
Extra wide.
Type 11
Butterfly
The great rolling one.
Type 10
Old Style
Styling like in the old days.
Type 12
Shuffle
The strong cruiser.
Type 15
24
tent
! Aluminium Colour
silver
Surface
blasted
Order Info
Item No. + ..MS

Type Mat. Colour Surface Note Item No. EUR
Shuffle
black blasted Item No. + ..MB L15.0 steel chrome ø 22,2mm 163L015.0 59,95
L15.1 steel chrome 163L015.1 69,95
L15.2 steel chrome HD dimple 163L015.2 Dokumentenart:
74,95
Dokumentenstatus:
Item No. + ..SW

Fertigungszeichnung Freigabe nicht erteilt
black polished Wide Bar

Titel/Benennung:
Lenker Typ A01
Zeichnungsnummer:
122A001
1/1
A 12.06.12
L11.0 steel chrome ø 22,2mm 163L011.0 64,95

gold polished Item No. + ..GO L11.1 steel chrome 163L011.1 69,95
L11.2 steel chrome HD dimple 163L011.2 74,95
Butterfly
L10 steel chrome ø 22,2mm 163L010.0 64,95
L10.1 steel chrome 163L010.1 69,95
» Handlebar 1“ L10.2 steel chrome HD dimple 163L010.2 74,95
Type Mat. Colour Surface Note Item No. EUR Old Style
L12.1 steel chrome 163L012.1 74,95
Drag Bar L12.2 steel chrome HD dimple 163L012.2 79,95
LD1.1 steel chrome 163LD01.1 54,95 Flat Track
Drag Bar wide L14.1 steel chrome 163L014.1 65,95
LD2.1 steel chrome 163LD02.1
Dokumentenart:
Fertigungszeichnung
Titel/Benennung:
54,95
Dokumentenstatus:
Zeichnungsnummer:
L14.1 steel black painted 163L014.1SW 59,95
LD2.1 steel black painted 163LD02.1SW 49,95 L14.2 steel chrome HD dimple 163L014.2 69,95
Lenker Typ A01 122A001
A 12.06.12 1/1
LD2.2 steel chrome HD dimple 163LD02.2 59,95 L14.2 steel black painted HD dimple 163L014.2SW 64,95
LD2.2 steel black painted HD dimple 163LD02.2SW 54,95 A14.1 alu. silver bead blasted 162A014.1MS 89,95
AD2.1 alu. black bead blasted 162AD02.1MB 89,95 A14.1 alu. black bead blasted 162A014.1MB 89,95
AD2.1 alu. black polished 162AD02.1SW 89,95 A14.1 alu. black polished 162A014.1SW 89,95
AD2.4 alu. silver bead blasted slot 162AD02.4MS 99,95 A14.4 alu. silver bead blasted slot 162A014.4MS 99,95
AD2.4 alu. black bead blasted slot 162AD02.4MB 99,95 A14.4 alu. black bead blasted slot 162A014.4MB 99,95
AD2.4 alu. black polished slot 162AD02.4SW 99,95 A14.4 alu. black polished slot 162A014.4SW 99,95
Clubman A14.4 alu. gold polished slot 162A014.4GO 99,95
LS1.1 steel chrome 163LS01.1 55,95
LS1.1 steel black 163LS01.1SW 49,95
LS1.2 steel chrome HD dimple 163LS01.2 59,95
LS1.2 steel black HD dimple 163LS01.2SW 54,95 » Clamps 1“
AS1.1 alu. silver bead blasted 162AS01.1MS 89,95
AS1.1 alu. black bead blasted 162AS01.1MB 89,95 Type Year ∆ Colour Item No. EUR
AS1.1 alu. black polished 162AS01.1SW 89,95
Harley Davidson
AS1.1 alu. gold polished 162AS01.1GO 89,95
Sportster all +10mm silver 161HD01SI 89,95
AS1.4 alu. silver bead blasted slot 162AS01.4MS 99,95
Sportster all +10mm black 161HD01SW 89,95
AS1.4 alu. black bead blasted slot 162AS01.4MB 99,95
XR1200* all - 121HD22 269,00
AS1.4 alu. gold polished slot 162AS01.4GO 99,95
* Brücke + Klemmböcke/top yoke and handlebar clamps
Street Bar
Triumph
L00.1 steel chrome 163L000.1 59,95
Bonneville spoke all +10mm silver 161T043SI 89,95
L00.1 steel black 163L000.1SW 54,95
Bonneville spoke all +10mm black 161T043SW 89,95
Bonneville spoke 02- +35mm silver 161T043/HSI 99,95
L00.2 steel black HD dimple 163L000.2SW 59,95
Bonneville spoke 02- +35mm black 161T043/HSW 99,95
A00.1 alu. silver bead blasted 162A000.1MS 89,95
Thruxton 08- -5mm silver 161T043SI 89,95
A00.1 alu. black bead blasted 162A000.1MB 89,95
Thruxton 08- -5mm black 161T043SW 89,95
A00.1 alu. black polished 162A000.1SW 89,95
Thruxton 08- +20mm silver 161T043/HSI 99,95
A00.4 alu. silver bead blasted slot 162A000.4MS 99,95
Thruxton 08- +20mm black 161T043/HSW 99,95
A00.4 alu. black bead blasted slot 162A000.4MB 99,95
Thunderbird Storm 11- +25mm silver 171T062 99,95
A00.4 alu. black polished slot 162A000.4SW 99,95
Thunderbird Storm 11- +25mm black 171T062SW 99,95
A00.4 alu. gold polished slot 162A000.4GO 99,95
Rise Up Clamps +25mm black 161RD25TSW 39,95
Roadster
L01.1 steel chrome 163L001.1 59,95
L01.1 steel black 163L001.1SW 54,95
L01.2 steel black HD dimple 136L001.2SW 59,95
A01.1 alu. silver bead blasted 162A001.1MS 89,95
A01.1 alu. black bead blasted 162A001.1MB 89,95
A01.1 alu. black polished 162A001.1SW 89,95
A01.4 alu. silver bead blasted slot 162A001.4MS 99,95
A01.4 alu. black bead blasted slot 162A001.4MB 99,95 » Drilling Jig, see page 21
A01.4 alu. black polished slot 162A001.4SW 99,95
A01.4 alu. gold polished slot 162A001.4GO 99,95
Handlebar Pre-Drilled Ø Item No. EUR
Bohrschablone/drill template
22mm 5mm 902DT01 29,95
25,4mm (1“) 5mm 902DT02 34,95
contact 25
cont
» Brilliant End
Crash Balls:
Attractive bar end, designed like LSL-Crash Pads.
! Crash Balls
black ..SW
Surface
anodised
Order Info
Item No. + SW
titan ..TI anodised Item No. + TI
silver ..SI anodised Item No. + SI
gold ..GO anodised Item No. + GO
yellow ..GE powder coated Item No. + GE
orange ..OR powder coated Item No. + OR
signal red ..SR powder coated Item No. + SR
green ..GR powder coated Item No. + GR
signal yellow ..SG powder coated Item No. + SG
red ..RT transparent covered Item No. + RT
blue ..BL transparent covered Item No. + BL
white ..WT powder coated Item No. + WT
chrome ..CR chrome plated Item No. + CR
stainless steel machined Item No.
Material Colour Surface Inner Piece Item No. EUR/ Material Colour Surface Inner Piece Item No. EUR/
Ø Pair Ø Pair
Crash Ball Alulenker/alu handlebar, Ø 38mm, length 22mm Crash Ball Stahllenker/steel handlebar, Ø 38mm, length 22mm
aluminium black anodised 14mm 75g 136AL14SW 25,95 aluminium black anodised 18mm 75g 136AL18SW 25,95
aluminium silver anodised 14mm 75g 136AL14SI 25,95 aluminium silver anodised 18mm 75g 136AL18SI 25,95
aluminium titan anodised 14mm 75g 136AL14TI 25,95 aluminium titan anodised 18mm 75g 136AL18TI 25,95
aluminium gold anodised 14mm 75g 136AL14GO 25,95 aluminium gold anodised 18mm 75g 136AL18GO 25,95
aluminium blue coated 14mm 75g 136AL14BL 25,95 aluminium blue coated 18mm 75g 136AL18BL 25,95
aluminium red coated 14mm 75g 136AL14RT 25,95 aluminium red coated 18mm 75g 136AL18RT 25,95
aluminium signalred coated 14mm 75g 136AL14SR 25,95 aluminium signalred coated 18mm 75g 136AL18SR 25,95
aluminium orange coated 14mm 75g 136AL14OR 25,95 aluminium orange coated 18mm 75g 136AL18OR 25,95
aluminium yellow coated 14mm 75g 136AL14GE 25,95 aluminium yellow coated 18mm 75g 136AL18GE 25,95
aluminium white coated 14mm 75g 136AL14WT 25,95 aluminium white coated 18mm 75g 136AL18WT 25,95
aluminium green coated 14mm 75g 136AL14GR 25,95 aluminium green coated 18mm 75g 136AL18GR 25,95
steel chromed 14mm 145g 136FE14CH 25,95 steel chromed 18mm 145g 136FE18CH 25,95
steel black coated 14mm 145g 136FE14SW 25,95 steel black coated 18mm 145g 136FE18SW 25,95
stainl. steel machined 14mm 150g 136VA14 34,95 stainl. steel machined 18mm 150g 136VA18 34,95
To use standard bar ends of some Suzuki and Triumph Type Inner Ø Item No. EUR/Pair
models LSL offers a mounting kit for aluminium handle-
Suzuki Kit für Seriengewichte/kit for standard weights
bars and clip on tubes. GSX-R 600/750 14mm 135S003 9,95
SV 650N 14mm 135S002 14,95
SFV 650 Gladius 14mm 135S005 9,95
SV 1000N 14mm 135S001 14,95
B-King 14mm 135S006 9,95
Triumph Kit für Seriengewichte/kit for standard weights
Thunderbird Storm 18mm 135T061 14,95
Kit für 25,4mm Alu Lenker/kit for 25,4mm alu handlebar
Bonneville Speichenrad 17mm 165T001 19,95
Kit includes an extension about 8mm at once.
26
tent
Handlebar, inner Ø :
22,2mm Alu/X-Bar: 14mm
!
22,2mm steel: 18mm
25,4mm steel: 19mm; 25,4mm Alu: 18mm
Material Colour Surface Inner Piece Item No. EUR/

Ø Pair
1) zylindrisch/cylindrical, Ø 21mm, Länge/length 16mm

1) Bar end
aluminium black anodised 14mm 35g 135-004SW 16,95 external Ø 21mm
aluminium silver anodised 14mm 35g 135-004SI 16,95
aluminium blue anodised 14mm 35g 135-004BL 16,95
aluminium titan anodised 14mm 35g 135-004TI 16,95
aluminium red anodised 14mm 35g 135-004RT 16,95
aluminium gold anodised 14mm 35g 135-004GO 16,95
aluminium black anodised 18mm 35g 135-001ASW 16,95
aluminium silver anodised 18mm 35g 135-001ASI 16,95
aluminium blue anodised 18mm 35g 135-001ABL 16,95
aluminium titan anodised 18mm 35g 135-001ATI 16,95
aluminium red anodised 18mm 35g 135-001ART 16,95
aluminium gold anodised 18mm 35g 135-001AGO 16,95 2) B
ar end weight
steel chromed 18mm 160g 135-001CH 25,95 external Ø 25mm
steel black coated 18mm 160g 135-001SW 25,95
aluminium black anodised 14/18 90g 135-006SW 19,95
aluminium silver anodised 14/18 90g 135-006SI 19,95
aluminium blue anodised 14/18 90g 135-006BL 19,95
aluminium red anodised 14/18 90g 135-006RT 19,95 3) B
ar end weight
aluminium gold anodised 14/18 90g 135-006GO 19,95 external Ø 30mm
4) Flat Cap, Ø 34mm, Länge/length 10mm
aluminium black anodised 14mm 50g 135-005SW 19,95
aluminium silver anodised 14mm 50g 135-005SI 19,95
aluminium blue anodised 14mm 50g 135-005BL 19,95
aluminium titan anodised 14mm 50g 135-005TI 19,95
aluminium red anodised 14mm 50g 135-005RT 19,95
aluminium gold anodised 14mm 50g 135-005GO 19,95
steel chromed 14mm 110g 135-005FCH 19,95
steel black coated 14mm 110g 135-005FSW 19,95
steel chromed 18mm 115g 135-0G5FCH 19,95 4) B
ar end weight
steel black coated 18mm 115g 135-0G5FSW 19,95 Flat Cap
steel chromed 19mm 110g 165-001CH 24,95
steel black coated 19mm 110g 165-001SW 24,95
5) elliptisch/elliptical, Ø 28mm, Länge/length 35mm
steel chromed 14mm 190g 135-003FCH 19,95
steel black coated 14mm 190g 135-003FSW 19,95
steel chromed 18mm 190g 135-001ECH 19,95
steel black coated 18mm 190g 135-001ESW 19,95
stainl. steel machined 14mm 190g 135-003VA 26,95
stainl. steel machined 18mm 190g 135-002VA 26,95
5) B
ar end weight
eliptical
For broadening our handlebars we offer a special

extension, to be mounted like bar ends.
Handlebar Inner Ø Length Item No. EUR/pair
Aluminium Lenkerverlängerung/bar extension

alu 22mm 14mm 35mm 135-LV4SW 24,95
alu 25,4mm (1“)* 14mm 20mm 165-LV2SW 29,95
steel 25,4mm (1“)* 18mm 20mm 165-LV3SW 29,95
*also usable to mount our bar end mirror (s. p. 30)
contact 27
cont
» Get a Grip
LSL-Sport Grips – the new grips

for your motorcycle
The new LSL sports grip offers an extreme handy sur-
face. With 30mm, the straight and slim body has the
right diameter for your grip. The optimal selected rubber
quality gives a smooth touch and even so offers perfect
damping performance.
The grip is equipped with two grooves on booth ends to
secure the rubber with locking wire as on the race track.
Due to the deep grey tone the grip surface is mostly in-
sensitive against dirt.
The grips are made for 7/8“ bars and come with open
ends for the use of bar weights.
Stylish handlebar grips

Aluminium and rubber:
Grippy rubber with stylish aluminium.
Length 125mm; Fits 7/8“ units.
! Colour Surface Identification
gold anodised Item No. + ..GO
black anodised Item No. + ..SW
silver anodised Item No. + ..SI
Material Colour Surface Inner Ø Item No. EUR/Pair
Sport-Lenkergriffe/sport grips
rubber grey 138RL01 19,95
Lenkergriffe/handlebar grips
rubber/alu black anodised 138G125SW 34,95
rubber/alu silver anodised 138G125SI 34,95
rubber/alu gold anodised 138G125GO 34,95
Lenkergewichte/handlebar weights, Ø 35mm, length 28mm, 85g
aluminium black polished 14/18mm 138LG1418SW 24,95
aluminium silver polished 14/18mm 138LG1418SI 24,95
aluminium gold polished 14/18mm 138LG1418GO 24,95
28
tent
Mirror bracket sets Mirror Adapter Mirror Broadening

The master cylinders often lack the Standard thread M10x1.25 fits on Moves the mirror 40mm outward and
necessary mirror mounting thread, many models. Made of high-strength 35mm higher. Thread: M10x1.25,
LSL offers adapting brackets to aluminium, black anodised. M10x1.25 left hand.
allow fixing mirrors.
Type Colour Surface Thread Position Item No. EUR
Spiegelhalter/mirror clamp
SP1 Klemmbride/bracket clamp 131SP01 piece 12,95
SP2.1 Spiegelhalteschelle/mirror clamp 131SP02.1 piece 22,95
SP3.1 GSX-R Seilzugarmatur/Bowden cable 131SP03.1 piece 29,95
SP3.2 R1 98-99 Seilzugarmatur/Bowden cable 131SP03.2 piece 29,95
SP3.3 R1 00- Seilzugarmatur/Bowden cable 131SP03.3 piece 29,95
Spiegelhalter-Sets/mirror mounting kits
BMW K1200S/1300S 130B028 kit 69,95
Yamaha YZF-R1 02-05 inkl. Abdeckung/cover included 130Y088 kit 75,95
Yamaha YZF-R1 06 inkl. Abdeckung/cover included 130Y108 kit 75,95 Masking Cap
Yamaha YZF-R1 09 inkl. Abdeckung/cover included 130Y120 kit 75,95
Yamaha FZS 1000 Fazer inkl. Abdeckung/cover included 130Y086 kit 79,95 In case of conversion, often the
Suzuki GSX 1300R 08- 130S120 kit 29,95 original mirror bracket is no lon-
Spiegeladapter/mirror adapter
ger required. An o-ring keeps the
BMW 5mm black anodised M10x1.25 right + left 130SAB1 pair 30,95
BMW 6mm black anodised M10x1.25 right + left 130SAB2 pair 30,95 plug tight in the tread and protects
Harley-Davidson chromed M10x1.25 right + left 130SAHD pair 19,95 against wetness.
Husqvarna black anodised M10x1.25 right + left 130SAHU pair 28,95
Bonneville Spoke Wheel black anodised M10x1.25 right + left 130SAT1 pair 19,95
Thruxton 08- black anodised M10x1.25 right + left 130SAT1 pair 19,95
Adapter-Kit Linksgewinde/adapter kit left hand thread (Yamaha, KTM ...)
to mount standard right/ right mirrors right/left 130SAL1 pair 7,45
Spiegel-Verbreiterung/mirror distance bracket
pair thread re/re black M10x1.25 130SA40 pair 35,95
pair thread li/re black M10x1.25 130SA40L pair 35,95
Verschluss-Stopfen, Stck./masking cap
LSL logo black M10 right + left 131VS010 piece 7,95
contact 29
cont
» Rear View
Gonia eMark
Now the popular Gonia is also available in ECE-certified version, called
„Gonia eMark“. Like Gonia, the eMark is machined of high value aluminium.
The clamping made of stainless steel allows an extreme adjusting range.
Thread M10x1,25, left and right hand mounting.
162
Gonia
127
The Gonia is a fully machined billet aluminium m irror. With 125x65mm
area and a convex blue glass. It offers an excellent back view. Mirrors
134
come as left or right version in silver or black anodised. Thread M10x1.25, 224
left and right hand mounting.
Gonia Bar End

LSL offers an extra-small bar end mirror in the shape of GONIA. The in-
cluded adapter bushing makes it fit to 7/8“ and 1“ handlebars. They are
designed to fit on the right and left side. Optional bar ends are available
to install the mirrors easily without change the controls.
Flame Superbike
Our favourite for Superbikes.
Thread M10x1,25; mirror area 112x80mm; ECE-certified.
30
tent
For models with right and left hand thread LSL offers
an adapter kit. It allows to mount standard mirrors on
Yamaha, KTM etc., look at page 29.
!
100
135
Clubman
145
Classic round mirror machined from billet aluminium with European
homologation, mounting M10x1.25, comes as right or left version.
60,5
23
107,5 75
Bar End
70
The round mirror is machined out of billet aluminium and equipped with
75mm convex mirror glass. Fitting is designed as a bar end mounting for
14mm diameter bars. Adapter bushes for 18mm are available.
Note/German Certification Colour Position Thread Handlebar Item No. EUR
Gonia eMark
ECE-Zulassung/-certified silver left M10x1.25 alle/all 132SD02LSI Stck./piece 99,95
ECE-Zulassung/-certified silver right M10x1.25 alle/all 132SD02RSI Stck./piece 99,95
ECE-Zulassung/-certified black left M10x1.25 alle/all 132SD02LSW Stck./piece 99,95
ECE-Zulassung/-certified black right M10x1.25 alle/all 132SD02RSW Stck./piece 99,95
Gonia
für Bikes mit deutscher ABE zugelassen silver left M10x1.25 alle/all 132SD01LSI Stck./piece 79,95
für Bikes mit deutscher ABE zugelassen silver right M10x1.25 alle/all 132SD01RSI Stck./piece 79,95
für Bikes mit deutscher ABE zugelassen black left M10x1.25 alle/all 132SD01LSW Stck./piece 79,95
für Bikes mit deutscher ABE zugelassen black right M10x1.25 alle/all 132SD01RSW Stck./piece 79,95
Gonia Bar End
nicht im Bereich der StVo zugelassen black left + right alle/all 132SE01SW Stck./piece 69,95
Lenkerendstücke/bar end black left + right inner Ø 14mm 165-LV2SW Paar/pair 29,95
Lenkerendstücke/bar end black left + right inner Ø 18-19mm 165-LV3SW Paar/pair 29,95
Flame
ECE-Zulassung/-certified black left + right M10x1.25 alle/all 131-FO1SW Stck./piece 18,95
Clubman
ECE-Zulassung/-certified silver left M10x1.25 alle/all 132SC01LSI Stck./piece 79,95
ECE-Zulassung/-certified silver right M10x1.25 alle/all 132SC01RSI Stck./piece 79,95
ECE-Zulassung/-certified black left M10x1.25 alle/all 132SC01LSW Stck./piece 79,95
ECE-Zulassung/-certified black right M10x1.25 alle/all 132SC01RSW Stck./piece 79,95
Bar End, Montage im Lenkerende/mounting on handlebar end
nicht im Bereich der StVo zugelassen silver left + right 22,2 alu. 131-EO14SI Stck./piece 79,95
nicht im Bereich der StVo zugelassen black left + right 22,2 alu. 131-EO14SW Stck./piece 79,95
Adapter for inner ø 18mm left + right 22,2 steel 131-EO1418 Stck./piece 4,95
Bar End, Klemmung auf Lenker/clamping on the handlebar
nicht im Bereich der StVo zugelassen silver left + right 22,2 steel+alu. 131-EO1SI Stck./piece 79,95
nicht im Bereich der StVo zugelassen black left + right 22,2 steel+alu. 131-EO1SW Stck./piece 79,95
contact 31
cont
32
tent
» Superbike-Kits
Superbike conversion kits

» LSL-Performance: Today’s Superbikes offer high performance, light
weight, excellent chassis and brakes – but they don’t
· A nodised top yokes, weather-resistant suit every customer in their extreme seating position.
· Ignition lock ring prevents cracking Therefore, LSL produces special Superbike conversion
· The complete offer includes all kits. Modified bikes get new top yokes with handlebar
required parts clamps and the special Superbike handlebar. Equipped
with this bar the rider reaches a comfortable seating
· Model-specific designed kit
position with perfect handling control and benefits
from better brake control.
Sports-Tourer of last generation today are equipped

with seperate high clip-on constructions. Also for
these motorcycles LSL offers special handlebar kits.
contact 33
cont
» Superbike-Kits
Superbike kits for your motorbike

LSL superbike handlebar kits are so designed that they It is often unavoidable due to the design of the fair-
can be installed at a reasonable cost and with normal ings that these must be shortened or cut out from
workshop equipment on the made-to-stock bike. If below. In this case, this is specially specified in the
you are not a trained motorcycle mechanic, allow us column „Cut fairing“ in the model lists.
to advise you on the conversion and contact a dealer
The appropriate handlebars are not provided in the
in your area.
kit, but has to be ordered separately because of the
Depending on the bike type, different construction possible selection of materials and colours.
principles are chosen to implement the conversion to
a superbike handlebar. Depending on the bike model,
longer brake hoses, new brake fluid container holder
or fairing brackets are required.
X-Bar
choose your model in table following pages
For heavy and extremely fast sport-tourer

GX bikes, we offer the top-yoke with clamps
for the 1 1/8” X-Bar. For these bikes the
handlebar type X01 is r equired. The availa-
bility of kits for older power-tourers will be
gradually expanded.
Adapter plate for X-Bar handlebars for

AX mounting on the series yoke bridge,
precisely CNC machined. Brake hoses and
small parts are supplied in the delivered kit
Handlebar adapter, attached to the

SX fork-stanchion for X-Bar handlebars,
precisely CNC machined. Mounting
without additional accessories.
34
tent
! » LSL delivers matching wind screens if required.

» To replace the mirrors mounted on fairing, we offer the right alternative, look at page 30/31.
» Brackets for mounting mirrors at the handlebar you will find on page 29.
» Please also order the matching bar end weights, shown on page 26/27.
» For older models we offer the necessary fairing support.
» All parts are available as spare parts as well.
7/8“ Handlebar
choose your model in table following pages
Top-yoke, CNC-machined, hollowed un-

GL derside. The original ignition lock can be
mounted safely. For modern superbikes,
we always use a complete LSL top yoke.
Bolt-on adaptors, CNC-machined, design

AL and colour co-ordinated to the top yoke.
The adaptor version is the easiest kind of
conversion. You only have to bolt on. No
need to change ignition lock or to adjust
the steering-head bearing.
Clamped to the fork-stanchion, CNC-

SL machined, colour according to the top
yoke colour. For most Honda and BMW
models we have designed an adapter to
clamp around the stanchion rising above
the top yoke.
contact 35
cont
» Superbike-Kits
! Please order handlebar (and

accessories if listed) in addition!
clutch line/cable
cut wind screen

brake line/lines
adapter 2-parts
standard clamp
adapter 1-part
throttle cable
X-Bar clamb
cut fairing
fairing mirror holder

top yoke
Model recommended holder required

Model Type Year Item No. EUR handlebar bar ends required left/right
Model-Type from bike documents ø included parts ! ! please order handlebar and other required parts in addition
Aprilia
RSV Mille ME -03 •• •• •• 120A009 419,00 Superbike - - -
Falco SL 1000 PA all •• •• •• 120A010 419,00 Superbike - - -
BMW
F800S E8ST 06- •• 120B032 219,00 Superbike - - -
S 1000RR ABS K10 -11 • • • • 120B040ABS 369,00 Superbike flat - - -
S 1000RR ABS K10 12- • • • • 120B043ABS 369,00 Superbike flat - - -
R 1100S ABS R2S -00 • •• 120B025ABS 199,00 BMW Heatgrips - - -
R 1100S R2S -00 • •• 120B025 239,00 BMW Heatgrips - - -
R 1100S R2S/R11S 01-06 • •• 120B027 239,00 BMW Heatgrips - - -
R 1100S int. ABS R2S/R11S 01-06 • •• 120B027ABS 199,00 BMW Heatgrips - - -
R 1200S R12S 06- •• 120B030 229,00 Superbike flat - - -
K 1200RS 589/K12 all • •• 120B022 199,00 Superbike - - -
K1200S K12S 04-08 • • 120B028 309,00 Superbike - - 130B028
K1200R K12R 05-08 • • • 120B029 349,00 Superbike flat - - -
K1300S K12S 09- • • 120B028 309,00 Superbike - - 130B028
K1300R K12S 09- • • • 120B039 389,00 Superbike flat - - -
Buel
XB-9R/12R Firebolt XB1 all •• • 120BU04 299,00 Superbike - - -
XB-12R Firebolt XB1 04- •• • 120BU04 299,00 Superbike - - -
Ducati
Monster S4 M4 00-04 •• 120D023 239,00 Superbike - - -
ST2/ST4 S1/S2 -03 •• 120D020 239,00 Superbike - - -
748/916 748/916/H3 all •• • •• 120D016 559,00 Superbike - - -
996/998 H2 all •• • •• 120D016 559,00 Superbike - - -
Honda
XBR500/GB 500 PC15/16 alle • •• 120H016 209,00 Superbike - - -
CBR 600F PC19/23 86-90 • •• •• 120H017 209,00 Superbike - - -
CBR 600F PC25/31 91-98 • •• • 120H045 259,00 Superbike - - -
CBR 600F PC35 alle • •• • 120H086 289,00 Superbike - - -
CBR 600F A PC41 11- • ••• • 120H137 259,00 Superbike flat - - -
NTV 650 RC33 88-97 • • • 120H037 209,00 Superbike - - -
NT 650 Hawk RC31 88-92 • • 120H048 209,00 Superbike - - -
CB 750F RC04 alle • • • 120H006 189,00 Superbike - - -
CBX 750F RC17 alle • • • 120H005 189,00 Superbike - - -
VFR 750F RC24 86-87 • •• •• 120H017 209,00 Superbike - - -
VFR 750F RC24 88-89 • • 120H041 169,00 Superbike - - -
VFR 750F RC36 90-97 • •• •• 120H045 259,00 Superbike - - -
VFR 800F RC46 98-01 • • 120H081 189,00 Superbike flat - - -
VFR 800F RC46 02- • • 120H098 189,00 Superbike flat - - -
CB 900F SC01 alle • • • 120H006 189,00 Superbike - - -
CB 900F SC09 alle • • • 120H006 189,00 Superbike - - -
CBR 900RR SC28 92-93 •• •• •• 120H047 349,00 Superbike - 134H047SW 131SP01/131SP01
CBR 900RR SC28/33 94-97 •• •• •• 120H047 349,00 Superbike - 134H059SW 131SP01/131SP01
CBR 900RR SC33 98-99 •• •• •• 120H082 349,00 Superbike - 134H082SW -
CBR 900RR SC44 00-01 •• •• • 120H090 369,00 Superbike - - -
36
tent
cut wind screen

adapter 2-parts
standard clamp
adapter 1-part
throttle cable
X-Bar clamb
clutch line
cut fairing
brake line
top yoke
Honda
CBR 900RR SC50 02- •• •• 120H096 369,00 Superbike flat 135-004... - -
CBR 1000F SC21/24 89-92 • •• 120H045 259,00 Superbike flat - - -
CBR 1000F SC24 93- • • 120H041 169,00 Superbike - - -
CBR 1000RR SC59 08- •• •• 120H125 359,00 Superbike flat 135-004... - -
CBR 1000RR ABS SC59 09-11 •• •• 120H131 319,00 Superbike flat 135-004... - -
VTR 1000 SC36 alle • ••• • 120H075 319,00 Superbike - - -
X 11 SC42 alle • • 120H091 159,00 Superbike - - -
CBR 1100XX SC35 -98 • • • • 120H074 219,00 Superbike - - -
CBR 1100XX SC35 99- • ••• 120H089 339,00 Superbike - - -
VFR 1200F SC63 10- • • 120H133 189,00 Superbike flat - - -
VFR 1200FD DCT SC63 10- • • 120H136 199,00 Superbike flat - - -
Kawasaki
GPZ 500S EX500A 88-93 • • • 120K022 189,00 Superbike - - -
GPZ 500S EX500D 94-03 • •• 120K068 189,00 Superbike - - -
GPZ 600R ZX600A 85-89 • • • 120K011 189,00 Superbike - - -
ZZR-600 ZX600D 90-92 • • • 120K046 189,00 Superbike - - -
ZZR-600 ZX600E 93- • • • • 120K046 189,00 Superbike - - -
ZX-6R ZX600G 98-99 • • • •• 120K083 189,00 Superbike - - -
GPZ 750 KZ750E 81-82 • • 120K017 159,00 Superbike - - -
GPX 750R ZX750F 87-88 • • • 120K014 189,00 Superbike - - -
ZXR-750 ZX750J/K 91-92 •• • •• 120K050 259,00 Superbike - - 131SP01/131SP01
ZXR-750 ZX750L/M 93-94 •• • •• 120K050 259,00 Superbike - 134K057SW 131SP01/131SP01
GPZ 900R ZX900A -89 • • • 120K005 189,00 Superbike - - -
ZX-9R ZX900B 94-97 •• • •• 120K061 259,00 Superbike - 134K061SW -
ZX-9R ZX900C 98-99 •• •• •• 120K084 259,00 Superbike - - 131SP02.1/131SP01
ZX-9R ZX900E 00-01 •• •• •• 120K091 349,00 Superbike - - 131SP02.1/131SP01
GPZ 1000RX ZXT00A all • • • 120K019 189,00 Superbike - - -
ZX-10 ZXT00B 88-90 • • • 120K020 189,00 Superbike - - -
ZX-10R ZXT00C 04-05 •• • 120K105 369,00 Superbike flat - - -
ZX-10R ZXT00D 06-07 •• •• •• 120K114 389,00 Superbike flat - - -
Z1000 SX ABS ZXT00G 11- • • 120K138 189,00 Superbike - -
Z 1100GP KZT10B 81-82 • • • 120K017 159,00 Superbike - - -
GPZ 1100 ZXT10E 95- • • • 120K078 189,00 Superbike - - -
ZZR-1100 ZXT10C 90-92 • • • 120K045 189,00 Superbike - - -
ZZR-1100 ZXT10D 93- • • • 120K058 209,00 Superbike - - -
ZZR-1200 ZXT20C 02- • • • 120K100 209,00 Superbike flat - - -
ZX-12R ZXT20A 00-01 •• •• 120K095 369,00 Superbike flat - - -
ZX-12R ZXT20A 02-03 •• •• 120K097 369,00 Superbike flat - - -
ZX-12R ZXT20A 04- •• •• 120K106 369,00 Superbike flat - - -
ZZR-1400 ZXT40A/C 06-11 • • • 120K115 349,00 Superbike flat - - -
ZZR-1400 ZXT40E/F 12- • • • 120K142 349,00 Superbike flat - - -
1400GTR ZGT40A/C 08- • • • 120K130 289,00 Tour Bar - - -
Suzuki
GS 500E GM51B 89-00 • •• 120S036 119,00 Naked Bike - - -
GSX 600F GN72B -97 • • • 120S035 189,00 Superbike - - -
GSX 600F AJ 98- • •• 120S069 209,00 Superbike - - -
RF 600R GN76B all • • • •• 120S050 189,00 Superbike - - -
GSX-R 600 WVB2 04-05 •• • 120S097 299,00 Superbike flat 135-004... - -
GSX-R 600 WVCE/CV 06-10 •• •• 120S108 319,00 Superbike flat - - -
GSX-R 600 C3 11- •• •• 120S127 299,00 Superbike - - -
SV 650S AV 99-02 •• •• • 120S076 319,00 Superbike flat - - -
SV 650S WVBY 03-08 •• • 120S091 329,00 Superbike flat - - -
SV 650SA ABS WVBY 07-08 •• • 120S116 319,00 Superbike flat - - -
GSX 750F GR78A/AK 89-02 • • • 120S037 189,00 Superbike - - -
GSX 750F WVAK 03-06 • • • 120S105 189,00 Superbike - - -
GSX-R 750 GR7AB 90-91 •• • •• 120S038 249,00 Superbike - - 131SP03.1/131SP01
GSX-R 750W GR7BB 92-93 •• • •• 120S044 249,00 Superbike - - 131SP03.1/131SP01
GSX-R 750W GR7BB 94-95 •• • •• 120S053 259,00 Superbike - - 131SP03.1/131SP01
GSX-R 750 GR7DB 96-99 •• • •• 120S063 269,00 Superbike - 134S063SW 131SP03.1/131SP01
GSX-R 750 WVBD 00-03 •• • •• 120S082 299,00 Superbike - - -
GSX-R 750 WVBD 04-05 •• • 120S097 299,00 Superbike flat - - -
GSX-R 750 WVCF/CW 06-10 •• •• 120S108 319,00 Superbike flat - - -
GSX-R 750 C4 11- •• •• 120S127 299,00 Superbike - - -
contact 37
cont
» Superbike-Kits
cut wind screen

adapter 2-parts
standard clamp
adapter 1-part
throttle cable
X-Bar clamb
clutch line
cut fairing
brake line
top yoke
Suzuki
TL 1000S* AG all •• • •• 120S065 269,00 Superbike - - 131SP03.1/131SP01
SV 1000S WVBX 03- •• • • 120S093 349,00 Superbike flat - - -
GSX-R 1000 WVBL 01-02 •• • •• 120S082 299,00 Superbike - - -
GSX-R 1000 WVBZ 03-04 •• • • 120S094 299,00 Superbike - - -
GSX-R 1000 WVB6 05-06 •• • 120S099 299,00 Superbike flat - - -
GSX-R 1000 WVCL 07-08 •• •• 120S114 329,00 Superbike flat - - -
GSX-R 1000 WVCY 09-11 •• • 120S123 329,00 Superbike flat - - -
GSX 1100F GV72C 88-95 • • • 120S031 189,00 Superbike - - -
GSX-R 1100 GV73C 89 • • • •• 120S023 199,00 Superbike - - 131SP01/131SP01
GSX-R 1100 GV73C 90 • • • •• 120S039AP 199,00 Superbike - - 131SP01/131SP01
GSX-R 1100 GV73C 90 •• • •• 120S039GB 249,00 Superbike - - 131SP01/131SP01
GSX-R 1100W GU75C 93-96 • • • •• 120S049AP 199,00 Superbike - 134S049SW 131SP01/131SP01
GSX-R 1100W GU75C 95-96 •• • •• 120S059GB 249,00 Superbike - - 131SP01/131SP01
GSX 1300R Hayabusa WVA1 99-07 • • •• • 120S077 299,00 Superbike - - -
GSX 1300R Hayabusa WVCK 08-12 • • • • 120S120 259,00 Superbike - - -
GSX 1300R Hayabusa WVCK 13- • • 120S120 269,00 Superbike - - -
* Austausch des Lenkungsdämpfers notwendig! / Replacement of the steering damper required!
Triumph
TT 600 806AD 00-03 • •• 120T022 209,00 Superbike - - -
Speed Four 806LB 02-05 • •• 120T022 209,00 Superbike - - -
Thruxton 900 986ME 04-07 •• • 120T031 299,00 Superbike - - -
Trident /Trophy 900 T300/C/E 92-01 • • 120T003 159,00 Superbike - - -
Daytona 750 /900 T300 92-93 • • • • 120T001 189,00 Superbike - - -
Sprint 900 T300A 93-98 • • 120T003 159,00 Superbike - - -
Sprint Sport T300A 97-98 • • 120T003 159,00 Superbike - - -
Daytona 900 /Super III T300B/D 94-96 • • • • 120T002 189,00 Superbike - - -
Speed Triple T300B 94 • •• 120T005 209,00 Superbike - - -
Sprint RS T695/AC 00-04 • • • 120T023 219,00 Superbike - - -
Sprint ST no heatgrips T695/AB 99-04 • • •• 120T018 249,00 Superbike - - -
Sprint ST no heatgrips 215NA 05-10 • • • 120T034 249,00 Superbike - - -
Daytona T595 /955i T595 97-01 •• • 120T014 299,00 Superbike - - -
Daytona 955i 595N 02-03 •• • 120T025 299,00 Superbike - - -
Daytona 955i 595N 04-05 •• • 120T032 309,00 Superbike flat - - -
Daytona 1200 T300D 94-97 • • • • 120T002 189,00 Superbike - - -
Yamaha
SRX600 1XM/L 86-89 • • • 120Y024 209,00 Superbike - - -
XJ600 51J 84-91 • • • 120Y037 189,00 Superbike - - -
FZR 600 3HE 89-93 •• • •• 120Y035 239,00 Superbike - - 131SP01/131SP01
FZR 600R 4JH 94-95 •• • •• 120Y057 309,00 Superbike flat - - -/131SP01
YZF 600R all 96-02 •• • •• 120Y069 309,00 Superbike - - -/131SP01
SZR 660 4SU 96-97 • • •• • 120Y072 239,00 Superbike flat - - -
FZ750 all 85-93 • • • 120Y023 189,00 Superbike - - -
YZF 750R all 93- •• • •• 120Y054 309,00 Superbike flat - 134Y054SW 131SP01/131SP01
TRX 850 4UN 95-00 •• • •• 120Y071 309,00 Superbike - - -/131SP01
XJ900 31A/58L 83-91 • • • 120Y038 189,00 Superbike - - -
FZR 1000 2LA 87-88 • • • •• 120Y027 189,00 Superbike - - -/130SAL1
FZR 1000 3LE 89-90 • • • •• 120Y029 219,00 Superbike - - 131SP2.1/131SP01
FZR 1000 3LE 91-93 • • • •• 120Y046AP 189,00 Superbike - - 131SP01/131SP01
FZR 1000 3LE 91-93 •• • •• 120Y046GB 269,00 Superbike - - 131SP01/131SP01
FZR 1000 3LE 94-95 • • • •• 120Y058AP 219,00 Superbike - - 131SP01/131SP01
FZR 1000 3LE 94-95 •• • •• 120Y058GB 319,00 Superbike - - 131SP01/131SP01
YZF 1000R alle 96-00 •• • •• 120Y070 319,00 Superbike - 134Y070SW 131SP01/131SP01
YZF-R1 RN01 98-99 •• •• •• 120Y077 329,00 Superbike - - 131SP2.1/131SP01
YZF-R1 RN04 00-01 •• •• • 120Y085 379,00 Superbike - - 131SP2.1/131SP01
YZF-R1 RN09 02-03 •• •• 120Y088 399,00 Superbike flat - - 130Y088
YZF-R1 RN12 04-05 •• •• •• 120Y094 399,00 Superbike flat - - -
YZF-R1 RN12 06 •• •• •• 120Y108 399,00 Superbike flat - - 130Y108
YZF-R1 RN22 09-11 •• • • 120Y120 349,00 Superbike flat - - 130Y120
FJ 1200 all 86-95 • • • 120Y047 189,00 Superbike - - -
FJ 1200A ABS 3YA 91-95 • • • 120Y047ABS 189,00 Superbike - - -
FJR 1300 RP04/08/11 01-05 • • 120Y087 159,00 Naked Bike - - -
FJR 1300 RP04/08/11 01-05 • • 120Y087H 169,00 Tour-Bar - - -
38
tent
Depending on model please order required parts in addition.

There are a lot of products which make sence as well.
Do not forget to order handlebar weights.

All handlebar weights fit our 14mm aluminium
handlebars and steel handlebars with an
18mm internal diameter.
see page 26/27
For some older models it is necessary to sup-

port the fairing ends with additional fairing
brackets. In this case, the article number is
listed in the ”Fairing brackets“ column.
Often the mirror visibility is limited due to

the wider superbike handlebar. In this case
order a separate mirror for handlebar mount-
ing. The Flame mirror is only used here as
an example. Any other mirror from the LSL
program can be used.
see page 30/31
Some bike models lack the threaded hole

for the mirror mounting. For these models
separate mirror mounts are listed in the table.
These must be ordered separately.
see page 29
For the models in which the fairing or wind-

screen needs to be cut, LSL provides shortened
to fit windscreens.
Our sales staff would be happy to help you.
mail: [email protected] / phone.: +49 (0)2151 5559 0
contact 39
cont
40
tent
» Match your Bike
» B ars are the same for all clamps. In case of

damage it is possible to order one single piece
clip-on bar as a spare part.
» b racket to mount the separate

brake f luid reservoir, fit in the
open end of the bar tube
» A s bar end weights can be used all products

in diameter 14mm for aluminium handlebars,
look at page 27.
The ideal bar angle provides optimal wrist position. The Tour Match will be delivered with all accessories
This eliminates the need to adjust for back sweep and for each respective model (mounting parts for the
hand lever positions are possible that would not be hydraulic fluid reservoir and additional spacers for
realised with a complex adjustment mechanism. fairing brackets) and TÜV approved. The handlebar
tubes are not model-specifically drilled.
A particularly lightweight stub unit was created thanks
to the load-optimised design of the retaining bracket.
The Tour Match combines high rigidity with surprisingly
little weight, so a stub half (Ø 46mm) weighs just 460g.
41
cont
» Match your Bike
Tour Match clip-on kit

Today‘s Superbikes offer fantastic performance but mounting parts (brake hoses, parts for the hydrau-
with an extreme riding position. Help comes from lics, etc) and fitting instructions. The bar tubes are
LSL Tour Match clip-on handlebars, offering a more not pre-installed with the holes for the switch units.
comfortable seating position. Like no other clip-on, For placing the holes in the right position we recommend
the patented construction improves the handlebar the use of a LSL drilling template.
position radically. The clip-ons are machined from
For some bikes, it is necessary to modify the lock-stop.
billet aluminium and bring the handlebars over the
In this case, you will receive necessary lock stop chips.
top yoke. Together with a 2º bar angle they create an
As bar ends you can use the handlebar weights (14mm)
ideal handling position.
from the LSL range.
Because of its load bearing frame work design the Tour
Match is an extremely light construction. In spite of its
high flex resistance, we face an extremely low weight of » LSL-Performance:
only 430g per one piece of Tour Match clip-on.
· Perfect grip above the top yoke,
The bar tubes are made of the same high-strength alumi-
ergonomic bar diameter
nium we use for our Street Bar production. The thickness
here is 4mm and a screw, gripping in the recess of the · Fork clamp is made from high quality
tube secures the bars from slipping out. It is possible to billet aluminum build for maximum load
order a single piece clip-on bar as spare part separately. · Every clip-on comes with a bike-
specific mounting kit
The Tour Match is supplied in kit form for several dif-
ferent bikes. A kit consists of the clip-on and all
» Tour Match » Top Match » Twin Match
42
tent
cut tail/wind screen

steering stop -2mm
mm closer to rider
with clutch lines

with brake lines
mm higher
Model
Model Type Year Clamp Item No.
Aprilia
SL 1000 Falco PA all Tour Match 25 10 150A010
RSV 1000 RR 04-05 Tour Match 60 0 • 150A012
RSV 1000R /Factory RR 06-09 Tour Match 60 0 • 150A015
RSV 4 10- Twin Match 60 10 • • 150A022
BMW
S 1000RR ABS 09- Twin Match 70 15 150B043
Ducati
Sport 1000 /Biposto C1 06-08 Tour Match 150D034
Honda
CBR 900RR SC28 92-95 Tour Match ••• 150H047
CBR 900RR SC33 96-97 Tour Match • • 150H072
CBR 900RR SC33 98-99 Tour Match • 150H082
CBR 900RR SC44 00-01 Tour Match 150H090
CBR 900RR SC50 02-03 Tour Match 30 0 150H096
VTR 1000F SC36 97-06 Top Match •• 150H075
CBR 1000RR SC57 04-05 Tour Match 70 40 150H103
CBR 1000RR SC57 06-07 Tour Match 70 40 •• 150H114
CBR 1000RR SC59 08- Tour Match 50 20 • 150H125
CBR 1000RR ABS SC59 09- Tour Match 50 20 150H131
CBR 1100XX SC35 97-07 Top Match 35 30 150H074
Kawasaki
ZX-10R ZXT00C 04-05 Tour Match • 150K105
ZX-10R ZXT00J 11- Tour Match 75 30 • • 150K136
ZX-10R ABS ZXT00J 11- Tour Match 75 30 • • 150K136A
KTM
1190 RC8 KTMRC8 08- Tour Match 30 10 • 150KT09
Suzuki
SV 650S AV 99-02 Tour Match • 150S076
SV 650S /SA WVBY 03-08 Tour Match 150S091
GSX-R 750 /1000 WVBD /BL 00-03 Tour Match 20 40 • • 150S082
GSX-R 600 /750 WVB2 /B3 04-05 Tour Match • 150S097
GSX-R 600 /750 WVCE/F/V/W 06-10 Tour Match 70 40 • 150S108
GSX-R 600 /750 C3 /C4 11- Tour Match 60 15 • 150S127
SV 1000S WVBX 03-05 Tour Match 150S093
GSX-R 1000 WVBZ 03-04 Tour Match • •• 150S094
GSX-R 1000 WVB6 05-06 Tour Match • • 150S099
GSX-R 1000 WVCL 07-08 Tour Match 65 40 •• 150S114
GSX-R 1000 WVCY 09-11 Tour Match 60 10 • • 150S123
GSX-R 1000 WVCY 12- Tour Match 60 10 • • 150S130
Triumph
Speed Four /TT 600 806LB 00-05 Top Match 50 20 150T022
Thruxton 986ME 06-08 Tour Match 150T031
Daytona 675 D67LC 05-07 Tour Match 90 20 • 150T037
Daytona T595 /955i T595 97-01 Tour Match 50 25 150T014
Daytona 955i 595N 02-05 Tour Match 50 25 • 150T025
Speed Triple 1050 515NJ 05-07 Tour Match 150T033
Speed Triple 1050 515NJ 08-11 Tour Match • 150T042
Yamaha
YZF-R6 RJ09 06-07 Tour Match 100 0 • 150Y104
TRX 850 4UN 95-00 Top Match • • 150Y071
YZF 1000 4VD alle/all Tour Match • 150Y070
YZF-R1 RN01/04 98-01 Tour Match • 150Y077
YZF-R1 RN09 02-03 Tour Match 95 0 •• 150Y088
YZF-R1 RN22 09- Tour Match • • 150Y120
43
cont
» Race Time
The secret of the stub arm is the correct handlebar

» LSL-Performance: tube position. It is completely unnecessary for the
manufacturers of extreme super sports bikes to take
· s tress optimized design of the handlebar tube angle of ultra slim racing bikes of
machined clamps the 80s.
· ergonomic bar angle LSL has been working for many years with the determi-
· Clip-on tubes are changable, choose nation of the correct wrist position. Therefore the LSL
yor favorid colour Sport Match versions combine the sporting demands
of a low positioned stub arm with the opportunity to
· special size 1“ available complete longer downhill stretches without tiring.
That this layout result in riding fast has been proven
by our many racing successes.
» Sport Match » Speed Match » O ffset High

– the stylish racing clip-on – a compact Sportler – the name is program
The Sport Match clip-on is the A compact clip-on of medium bar The Offset High construction
classic construction carrying height. Controls can be moved brings the clip-on grips forward
the bars close to the stanchions. even further inwards. The bar and higher. These Offset High
The bar angle is 5°. angle is 4°. clamps are designed for sport
bikes with high fitted RAM air-
intakes. The bar angle is 5°.
The race sport chassis expert Kalex also applys LSL clip on sets.
44
tent
Complete kit for selected models

For some specific models LSL provide complete Speed
Match and Offset High kits. These each include all nec-
essary mounting hardware and silvery handlebar tubes.
Model
Modell Type Year ∆∆ Item No. EUR
Offset High Kit, inkl. Bremsleitung/brake lines included

Yamaha YZF-R1 RN 09 02-03 +50mm 153Y088H
Speed Match Kit
Kawasaki ZX10R ZXT00J 11- +25mm 153K136R
Daytona 675 09- +25mm 153T045R
Yamaha YZF-R6 RJ 15 08- +30mm 153Y118R
!
Colour Length Item No.
Please order clip on tubes, clamps and
Standard 22,2mm Brake Box brackets if needed separatly.
black 280mm 154L01SW
anthracite 280mm 154L01AN
silver 280mm 154L01SI
blue 280mm 154L01BL
red 280mm 154L01RT Clip-on tubes
gold 280mm 154L01GO
titan 280mm 154L01TI Bars are the same for Sport
Zoll/inch 25,4mm; Klemmung/clamping 22,2mm
Match and Offset High. In case of damage
black 270mm 154L02SW
silver 270mm 154L02SI it is possible to order one single piece clip-on bar as
Brake Box Halter/bracket a spare part.
universal 154-T22
Pair of Clamps
ø Colour Item No. EUR ø Colour Item No. EUR ø Colour Item No. EUR
Sport Match SM Speed Match RS Offset High OH

35mm silver 154SM35 35mm silver 154RS35 39mm silver 154OH39
35mm black 154SM35SW 36mm silver 154RS36 39mm black 154OH39SW
39mm black 154SM39SW 41mm silver 154RS41 45mm silver 154OH45
40mm silver 154SM40 41mm black 154RS41SW 46mm silver 154OH46
43mm silver 154SM43 50mm silver 154RS50 50mm black 154OH50SW
45mm silver 154SM45 50mm black 154RS50SW 51mm silver 154OH51
50mm silver 154SM50 52mm silver 154RS52 52mm black 154OH52SW
51mm silver 154SM51 53,5mm silver 154OH535
52mm silver 154SM52 54mm silver 154OH54
53mm silver 154SM53 54mm black 154OH54SW
54mm silver 154SM54 56mm silver 154OH56
55mm silver 154SM55
45
cont
» The Right Setting
» LSL-Performance:
TÜV.com is a high quality
accreditation offered by
TÜV in Germany and con-
firms the outstanding
product properties. The
LSL clutch and brake levers
achieve TÜV.com by surpas-
sing German regulations.
All details on website
www.tuv.com/de.
Lever in short version,

difference to long version: -3cm
The Right Setting – using the fully machined

LSL brake and clutch levers
The right ergonomic shape, lever length and rounding-off provide the opti-
mal combination for brake and clutch performance.
For all hand sizes, the positioning of the lever is adjustable in 6 different
positions.
The adjusting ellipse is supported with ball bearings. The adjusting lever,
with its protruding top, is especially grippy and also allows adjustment
during riding. The bearings of the lever mechanics are made from long-
life brass.
84mm
54mm
Lever grip at short and long version

Dokumentenart: Dokumentenstatus:
0 0
Titel/Benennung: Zeichnungsnummer:
The standard version of the LSL lever is made to be

0 0
The levers are equipped from the factory with red
accessed by the whole hand. The short version is best 0 0
adjusting levers. The equipment can be selected with
1/1
suited to well-functioning brakes and can accommo- optional gold, blue, silver or black adjusting levers
date a three finger grip. This short version also comes when ordering at no extra cost.
with ABE.
46
tent
The matching levers for your bike

are listed in table at page 76. !
! Lever colours Lever with Red

Adjusting Lever
Adjuster
colours
Lever in different colours with Adjusting Levers
in colours except red (= standard)
silver Item No. lever + SI Item No. Lever + colour code lever + 200SI
anthracite Item No. lever + AN Item No. Lever + colour code lever + 200AN
black Item No. lever + SW Item No. Lever + colour code lever + 200SW
gold Item No. lever + GO Item No. Lever + colour code lever + 200GO
blue not possible Item No. Lever + colour code lever + 200BL
red not possible red adjusting lever = standard
Hydraulic-Unit
Hydraulic Unit Type Clutch Lever
Lever, apiece Brake Lever
Lever, apiece
long short long short
Hebel für Brembo + Nissin Pumpen/Lever for Brembo + Nissin Pumps

Brembo Master Cylinder 15 RCS - - 200-R37R+colour 200SR37R+colour
Brembo Master Cylinder 19 RCS - - 200-R37R+colour 200SR37R+colour
Brembo Clutch Cylinder 16 RCS 200-L37R+colour 200SLR37R+colour - -
Nissin Radial Master Cylinder - - - 200-R18R+colour 200SR18R+colour
47
cont
» Brake Box
! Professional brake fluid reservoir,

”TÜV“ certified for many models
LSL-Brake Box
A long overdue replacement for those ugly plastic brake The LSL-Brake Box ticks all the boxes
fluid reservoirs. LSL now has the slick alternative.
The Brake Box is certified by the “TÜV- Rheinland” and
Different safety aspects are important. For example, the comes either in anodised black or silver, volume is 36ml.
reservoir needs to hold the required volume of brake There is even a version for your clutch or rear brake with
fluid. All components need to be resistant against the volume 20ml. For both resevoires are mounting brackets
corrosive fluid and less weight is desired. And after all, available.
it needs to be a good looker.
48
tent
LSL Brake Fluid Reservoir for BMW models

LSL has developed a brake fluid reservoir to specifically
The BMW Brake Fluid Reservoir is not
designed for use as a clutch fluid reservoir,
!
match the brake pump on current BMW models. The bot-
because the rubber parts are not resistant
tom of this brake fluid container is designed to replica-
to the required mineral oil fluid.
te the OEM part which makes for an easy replacement.
If the OEM container came equipped with a foam cylin-
der, the LSL replacement product will be shipped with Brake Fluid Reservoir 244BB41 ...
one as well.
» For use with
The LSL brake fluid container can only be installed on brake pump version ”Old“:
BMW motorcycles with 2nd Generation Integrated Anti-
The old version of the pump is equip-
Lock Brakes that are equipped with a round plastic re-
ped with a brake bleeder and the
servoir bolted directly to the brake pump. Some models
handlebar clamp is bolted on with
come with two different brake pumps. We‘ll be happy to
two M5 screws. Usually, the contai-
find out which one fits your motorcycle, all we need is
ner comes with a yellow foam insert.
the chassis number.
Brake Fluid Reservoir 244BB44 ...

Note: This product is not designed to be used on
» For use with
vehicles with external, rubber-mounted containers (e.g.
brake pump version ”New“:
various F800s)!
The old version of the pump is equip-
ped with a brake bleeder and the
handlebar clamp is bolted on with
two M5 screws. Usually, the contai-
244BB01 ner comes with a yellow foam insert.
Cover for original BMW clutch

fluid reservoir 246BB41
244BT01
Type Volume Colour Item No.
Bremsflüssigkeitsbehälter/brake fluid reservoir

Brake Box 36 ml silver 244BB01SI option 243-H82:
Brake Box 36 ml black 244BB01SW bracket to mount on Honda and
Kawasaki, Suzuki, Triumph, Yamaha – Halter enthalten/bracket included KTM models.
BMW Bremsflüssigkeitsbehälter/brake fluid reservoir BMW
Brake Box BMW 36 ml black 244BB41SW
Brake Box BMW 36 ml silver 244BB41SI
Schaumstoffeinsatz für BMW Brakebox 244BB41... 244-SE01
Brake Box BMW 36 ml black 244BB44SW
Brake Box BMW 36 ml silver 244BB44SI
Kupplungsflüssigkeitsbehälter/clutch fluid reservoir option 243-BT1:
Clutch Box 20 ml silver 244BT01SI bracket to mount clutch fluid reservoir
Clutch Box 20 ml black 244BT01SW sidewise and mounting rear brake system
BMW Cover Kupplungsbehälter/cover clutch fluid reservoir
Clutch Cover silver 246BB41SI
Clutch Cover black 246BB41SW
Behälterhalter/reservoir bracket
Honda, KTM Stainl. Steel 243-H82
side mounting kit Stainl. Steel 243-BT1
49
cont
» Under Pressure
» LSL-Performance:
· Stainless Steel braided with

Teflon® hose
· Fittings in aluminium, a range of
bright colours or chromed
· Transparent covered against dirt and to
avoid scratches to lacquered parts
Stainless steel brake hoses

For an improvement in braking systems the exchange
of standard brake hoses for stainless steel braided
hoses is the easiest step. LSL produces these brake
hoses in-house under licence from Swiss brake
specialist, Speed Brakes.
The brake hose fittings are produced out of a special
alloy that offers optimum bending qualities. With
a costly anodising process (compressing, anodising,
brightening) the Swiss produce a unique colour shine.
50
tent
For model specific lines, please contact

the LSL team. Please have your vehicle !
documentation readily accessible.
LSL braided hoses have a Teflon® hose inside and are

always covered by a transparent synthetic coat. The
synthetic hose avoids brake dust penetrating into
the wire braid and saves lacquered body parts from
getting scratches. The surface is easy to clean with
a soapy detergent. Unlike ordinary rubber hoses the
stainless steel braided Teflon® hose offers a life time Order single lines:
reliability and needs no further change.
Item No. „220 -“ + length (e.g. „030“ for 30cm)
LSL braided hoses are available with different + color fittings (e.g. „SW“ for black) + color hose
coloured fittings. (e.g. „grey“) + offset of the fittings (for example,
„0°/20° front“ and „0°/0° sideways“)
The standard colour is anthracite. Banjo bolts come mat-
ching in anthracite as well. Fittings and banjo bolts in
chrome-plated finish are at an extra cost. Ordering a vehicle-specific kit:
All LSL braided hoses can be supplied with matching Please let us know the vehicle type and chassis num-
banjo bolt sets. ber, and the desired color of the fittings and hoses.
!
!
Model Specified Brake Lines Type Order-Info: Please declare accurate bike type for specific
Kits vorn/front kits brake line kits. Single lines can be ordered like shown in
1 piece F table at 30cm for example.
1 piece with cross stanchion X
Please also declare crank, 20°/0° for example.
2 pieces G
2 pieces cross over H Colour Fittings & Banjo Bolt Surface No. + Colour
2 pieces whith double banjo bolt J
3 pieces K
black anodised Item No. + SW
3 pieces, grouted devider L
3 pieces with devider O
4 pieces N anthracite anodised standard
5 pieces M
Kits hinten/rear kits silver anodised Item No. + SI
1 piece R
Kupplung/clutch
1 piece C gold anodised Item No. + GO
Single Brake Lines Item No. blue anodised Item No. + BL
Länge/length
< 30 cm 220-030
red anodised Item No. + RT
< 40 cm 220-040
etc. 220-+Länge/length chromed Item No. + CR
every 10cm more
chromed fittings, piece Colour Brake Lines Cover Order Info
Banjo Bolts clear plastik standard
einfach/single
M10x1.00 220-301+colour
anthracite plastik Item No.+PVC AN
M10x1.25 220-302+colour
doppelt/double black plastik Item No.+PVC SW
M10x1.00 220-311+colour
M10x1.25 220-312+colour
special colours plastik on request
Stopplichtschalter/brake light switch
M10x1.00 220-301ST
M10x1.25 220-302ST
51
cont
» Get It Under Control
» LSL-Performance:
· Aluminium housing, CNC-machined

body brackets
· 7 settings, 6 different lengths
· Model spedific mounting kits
Steering control
Modern motorcycle constructions lead to less weight and
wider tyres. Besides better handling and better accelerati-
on the negative result of this development is a high sensi-
tivity to the ”tank slapper“ phenomenon. This leads to less
stability during rapid acceleration and ultimately less fun.
To avoid this problem the use of a steering damper is re-
quired on the race track. With specified constructions LSL
now brings this damping instrument to your bike.
The damper unit is well proven for stability and safety. It
consists of a stiff aluminium housing containing a 7 set-
ting adjustable hydraulic damping system. Different kinds
of damper brackets meet different requirements for the
mounting position.
For Custom bikes the damper is also available inan oval
shape and anodised in silver. For sidecars or trikes we
propose the oval type damper with 150mm stroke.
52
tent
T
Titan: Damper unit: round, titan anodised7 setting adjustable; rod diameter 9mm; Bracket: billet aluminium with
pillow ball
O
Oval: Damper unit: oval, silver anodised; 7 setting adjustable; rod diameter 9mm; Bracket: aluminium shell with
ball joint
ø standard long Slidertube clamp

Standrohrschelle Enables you to fix universal accessories on the
32 103B032 - slidertubes. Diferent Diameters and length available.
35 103B035 -
36 103B036 -
37 103B037 -
38 103B038 -
39 103B039 -
40 103B040 -
41 103B041 103B041L
42 103B042 -
43 103B043 103B043XL
45 103B045 103B045XL
46 103B046 -
48 103B048 -
49 103B049 103B049XL
50 103B050 -
51 103B051 -
52 103B052 -
53 103B053 103B053L
54 103B054 103B054XL
55 103B055 -
56 103B056 103B056XL
53
cont
» Steering Damper
!
at orig. attachment point

* not in combination with high handlebar!
across the fuel tank*

at side of the frame
limit steering stop

in cockpit
at engine
series Titan series Oval
Model Type Model-Year Item No. Item No.
BMW
F800S/ST E8ST 06- • 100B032T -
F800R E8ST 07- • 100B032T -
S 1000RR K10 alle • 100B040T -
R 850/1100R 259 94- • 100B027T -
R 1100S R2S alle • 100B027T -
R 1200R R1ST 11- • 100B046T -
R 1200S R12S 06- • 100B030T -
Buell
Cyclone M2/2-2 EB1 97-02 • 100BU01T -
Lightning S1/1-2 /S3 EB1 97-02 • 100BU02T -
Lightning X1 BL1 98-02 • 100BU03T -
XB-Modelle XB1 02-04 • 100BU05T -
XB-Modelle XB1 05-10 • 100BU07T -
Ducati
Monster 696 /1100 M5 08- • 100D036T -
Monster 750/900 M/M1/M2 94-01 • 100D015T 100D015
Monster 800/900/1000ie M4 02-05 • 100D023T 100D023
Monster S4/S2R/S4R M4 00-08 • 100D023T 100D023
748R/S/SP 748/H3 96-02 • 100D016T -
916/996/998 916/H2 95-03 • 100D016T -
749/999 H4/H5 02-07 • 100D028T -
848 H6 08-10 • 100D042T -
Streetfighter/S F1 09- • 100D037T -
Harley-Davidson
Sportster XL1/XL/2 86-03 • 100HD02T 100HD02
Sportster XL2 04- • 100HD19T 100HD19
FXST/C FXST 85-00 • 100HD05T 100HD05
Honda
CBR 600 F PC35 99-06 • 100H086T -
CBR 600RR PC37 03-04 • 100H099T -
CBR 600RR PC37B 05-06 • 100H107T -
Hornet 900 SC48 01-05 • 100H097T -
CBR 900RR SC28/33 92-97 • 100H047T -
CBR 900RR SC33 98-99 • 100H082T -
CBR 900RR SC44 00-01 • 100H090T -
CBR 900RR SC50 02 • 100H096T -
CBR 900RR SC50 02-03 • 100H100T -
VTR 1000F SC36 97-06 • 100H075T -
VTR 1000 SP1 SC45 00-01 • 100H093T -
Kawasaki
ZXR 400 ZX400L 91-00 • 100K053T -
ZX-6R/RR ZX636B/600K 03-04 • 100K101T -
ZX-6R/RR ZX636C/600N 05-06 • 100K107T -
ZX-6R ZX600P 07-08 • 100K120T -
ZX-6R ZX600R 09-12 • 100K114T -
ZX-6R 636 ABS ZX636E 13- • 100K146T -
Z 750 ZR750J 04-06 • 100K104T -
Z 750** ZR750L 07- • 100K124T -
ZXR 750/R ZX750J/K/L/M 91-95 • 100K050T -
ZX-9R ZX900E 00-01 • 100K091T -
ZX-9R ZX900EF 02-03 • • 100K099T -
Z 1000 ZRT00A 03-06 • 100K102T -
ZX-10R ZXT00C 04-05 • 100K105T -
ZX-10R ZXT00D/E/F/J 06- • 100K114T -
** Verwendung nur möglich ohne linke Kühlerverkleidung / only without left cooler cover
KTM
Superduke 990 LC8EFI 05-06 • 100KT07T -
Superduke 990 LC8EFI 07- • 100KT08T -
Suzuki
GSF 600N GN77B/WVA8 95-04 • • 100S060T -
GSX-R 600 WVBG 01-03 • 100S087T -
GSX-R 600 WVB2 04-05 • 100S082T -
GSX-R 600 WVCE 06-07 • 100S108T -
SV 650S AV 99-01 • 100S076T -
54
tent
at orig. attachment point

* not in combination with high handlebar!
across the fuel tank*

at side of the frame
limit steering stop

in cockpit
at engine
series Titan series Oval
Model Type Model-Year Item No. Item No.
Suzuki
GSX-R 750 GR7AB/BB 90-93 • - 100S044
GSX-R 750 WVBD/ WVB3 00-05 • 100S082T -
GSX-R 750 WVCF 06-07 • 100S108T -
GSX-R 1000 WVBL/ WVBZ 01-04 • 100S082T -
GSX-R 1000 WVB6 05-06 • 100S099T -
TL 1000S AG 97-00 • 100S065T -
TL 1000R AM 98-99 • 100S072T -
SV 1000N/S WVBX 03-05 • 100S093T -
GSX-R 1100 GV73C 89-92 • - 100S044
GSF 1200N/S GV75A/WVA9/CB 96-06 • 100S085T -
GSX 1300R Hayabusa WVA1 99-07 • 100S077T -
GSX 1300R Hayabusa WVCK 08- • 100S120T -
B-King WVCR 08-10 • 100S119T -
Triumph
Daytona 600 H835 alle • 100T029T -
Street Triple 675 D67LD 07-12 • 100T041T -
Bonneville***/ Thruxton*** 986M -12 • 100T024T 100T024
T 595/955i T595 -01 • • 100T014T -
T 955i 595N 02- • • 100T025T -
Speed Triple 1050 515N 05-10 • • 100T033T -
*** nur möglich mit anderen Lampenhaltern und Zündschlossverlegung/modification of headlight brackets and ignition lock required
Yamaha
FZS 600 Fazer RJ02 -03 • 100Y078T -
YZF-R6 RJ03 99-02 • 100Y079T -
YZF-R6 RJ05 03-05 /06-07 • 100Y089T -
YZF-R6 RJ11/15 06- • 100Y118T -
FZS 1000 Fazer RN06/14 alle • • 100Y086T -
YZF-R1 RN01/04 98-01 • 100Y077T -
YZF-R1 RN09 02-03 • 100Y088T -
YZF-R1 RN12 04-05 • 100Y094T -
YZF-R1 RN12/19 06- • 100Y108T -
XJR 1200/1300 4PU/ RP02/RP06/RP10 alle • 100Y090T -
V-Max -92 • 100Y044T -
V-Max 93-04 • 100Y056T -
Product Stroke Housing Total Item No. Item No.

Length Length Titan Silber
Lenkungsdämpfer Unit/steering damper

Lenkungsdämpfer 62mm 140mm 250mm 101TI06 -
Lenkungsdämpfer 70mm 145mm 285mm 101TI07 101OV07
Lenkungsdämpfer 120mm 194mm 375mm 101TI12 101OV12
Lenkungsdämpfer 150mm 224mm 435mm - 101OV15
Reparatur-Kit/repair kit
Dämpferkolben, Scheibe, Simmerringe/damper piston, shim, shaft oil seal 101-R22.3 101-R24.5
mounting at the engine mounting across the fuel tank mounting at the frame
55
cont
56
tent
» 2Slide-Performance
» LSL-Performance:
· Longitudinal: 30mm; 4 settings

Vertical: 22mm; 2 slides
· grippy knurled pegs
· anodised colour black or anthracite
corresponding to the frame colour
2Slide rear set

Thorough testing and race track development led to
the now well established LSL adjustable rear set – the
2Slide. Its design reflects the status of technology in
the world of racing.
The position of the pegs can be adjusted longitudinally
by 4 positions whilst the height can be shifted in two
slides, hence the name to the product. The pegs are
short and have a rough knurled surface for extra grip.
The gear lever is designed in a banana-shape to avoid
shifting during active cornering movement. The length
adjusting of the gear shift rod is achieved through in-
terchangeable distances.
57
cont
» 2Slide-Performance
In some instances, the pegs are positioned too far

forward by the manufacturer. A good example is
the current Triumph Street Triple Cups model. LSL
offers a foot rest kit to professionally solve this,
improve the riding position and ultimately the
handling. And: This is the kit with which Arne Tode
became the German Champion on his Daytona 675!
LSL also support the stunt rider Mai-Lin: She

chose the 2Slide system for her Street Triple!
58
tent
Adjustable positions:
Longitudinal: 30mm; 4 settings
Vertical: 22mm; 2 slides
!
Model Type Year Colour Item No. Brake hose
Aprilia
Tuono/RSV 1000 RR 04-11 black 118A015 225BS78AB
RSV 4R RK 10- black 118A022 225BS63BE
Tuono/RS V4 APRC RK 11- black 118A023 225BS63BE
BMW
S 1000RR ABS&QS K10 09- black 118B040 -
Honda
CBR 600RR PC37 03-06 black 118H099 225BS54BB
CBR 600RR PC40 07- black 118H117RR* 225BS52BB
CBR 900RR SC44 00-01 black 118H090 -
CBR 900RR SC50 02-03 black 118H096 -
VTR 1000 SP1/2 SC45 00-05 black 118H093 -
CBR 1000RR SC57 04-05 black 118H103 225BS54BB
CBR 1000RR SC57 06-07 black 118H103 225BS49BB
CBR 1000RR o. ABS SC59 08- black 118H125 -
CB 1000RA ABS SC60 08- black 118H127 -
* nur für Rennsporteinsatz/race use only
Kawasaki
ZX-6R ZX600G/J/636A 98-02 black 118K084 -
ZX-6R/RR ZX636B/600K 03-04 black 118K101 225BS54BB
ZX-6R/RR ZX636C/600N 05-06 black 118K107 225BS51BE
ZX-6R ZX600P 07-08 black 118K120 225BS54BE
ZX-6R ZX600R 09-12 black 118K131 225BS61BE
ZX-6R ZX600R 13- black 118K131 225BS51EG18
Z 750/R ZR750L/N 07-/11- black 118K124 -
ZX-9R ZX900C/E 98-03 black 118K084 -
ZX-10R ZXT00C 04-05 black 118K105 225BS59BE
ZX-10R ZXT00D 06-07 black 118K114 225BS43AB
ZX-10R ZXT00E/F 08-10 black 118K127 -
ZX-10R ZXT00J 11- black 118K136 -
Z 1000/SX ZXT00G 10-/11- black 118K135 225BS51EG18
ZX-10R ZXT00J 08-10 black 118K127 -
ZX-10R ABS ZXT00J 11- black 118K136 225BK44
KTM
990 Super Duke LC8EFI 05- black 118KT07 -
RC8 RC8 08- black 118KT09 -
Suzuki
GSX-R 600 WVBG 01-03 black 118S082 -
GSX-R 600 WVB2 04-05 black 118S097 -
GSX-R 600 C3 11- black 118S123 -
GSX-R 750 WVBD 00-03 black 118S082 -
GSX-R 750 WVB3 04-05 black 118S097 -
GSX-R 750 C4 11- black 118S123 -
GSX-R 1000 WVBL 01-02 black 118S082 -
GSX-R 1000 WVBZ 03-04 black 118S094 -
GSX-R 1000 WVB6 05-06 black 118S099 -
GSX-R 1000 WVCL 07-08 black 118S114 -
GSX-R 1000 WVCY 09- black 118S123 -
Triumph
Street Triple 675 D67LD 08-12 black 118T037 225BS56EBE
Street Triple 675 L67LR/ 3 13- black 118T053 -
Daytona 675 D67LC 06-12 black 118T037 -
Daytona/Speed Triple T509/T595/595N 99-04 black 118T025 -
Speed Triple 1050 515NJ 05-11 black 118T033 -
Speed Triple 1050 515NV 11- black 118T046 -
Yamaha
YZF-R6 RJ05/09 03-05 black 118Y089 -
YZF-R6 RJ11/15 06- black 118Y104 -
FZ 8/Fazer RN25 10- black 118Y106 -
MT09 RN29 14- black 118X129 -
YZF-R1 RN09 02-03 black 118Y088 -
YZF-R1 RN12 04-06 black 118Y094 -
YZF-R1 RN22 09- black 118Y120 -
FZ 1/Fazer RN16 06- black 118Y106 -
To enable the fitting of the 2Slide LSL rear sets in the reverse shifting position, only the gear shifter has to be reversed on many models. Some models require
a specific adaptor kit: Please contact our colleagues for advice on your individual requirements.
59
cont
W 650/800
LSL-Rear Sets
The LSL rear sets are inspired by the engineering life PTFE bushes. LSL rear sets therefore
construction used for bridges. By using this design offer a more precise gear shift. Every LSL rear set is
on every single part of the rear set LSL builds very anodised for weather protection. LSL was the first
stiff, yet super light rear sets, which also looks ex- manufacturer to supply after-market rear sets with the
tremely good. Footrest hangers and levers are pro- option of foldable pegs. Even at extreme cornering
duced from high quality aluminium. To prevent the foldable pegs give extra safety when touching the
the play of the levers on the bearings we use long ground. This option has to be ordered extra.
All Cup motorcycles were fitted with the obligatory

LSL-rear rest system. Tracks such as this off-road sec-
tion would not have been manageable without the ad-
apted foot rests. And, in particular, in these races the
foldable variant demonstrated powerfully its resilience
and performance.
Triumph Thruxton
On the Triumph Cafe Racer Thruxton, the rear sets are
positioned too far back. The LSL-rear sets allow for the
foot position to be moved forward by 3.5cms (approx.
1.4”), which delivers significantly improved foot con-
trol for the rider and, consequently, bike handling.
60
tent
Sportster XL 883/1200 Honda Seven Fifty

Over the manufacturer’s s tandard LSL now offers system kits for
foot rest position, the L SL-System Youngtimers such as the Honda
rear sets provide the rider with a Seven Fifty. This mod is a must
noticeably more dynamic seating for Cafe Racer projects!
position.
» LSL-Rear Set (standard colour silver, black delivery versys payment)

Model Type Year Offset Item No. Brake hose
X/Y
BMW
R 1100S ohne ABS R2S/R11S 98-06 1.5/0.5-1.5 110B025 225BS41BD
Buell
Lightning X1 no passenger BL1 98-02 5.0/3.5 110BU03 -
XB-9R/12R XB1 05-10 1.0/-0.5-2.5 110BU04 -
Ducati
Monster M900 M2 02- 1.5/0.0 110D023 -
Monster S4/1000 M4 02- 1.5/0.0 110D023 -
Monster/S4, Sozius M4/M2 02- 0.0/0.0 110D023.2 -
848/1098 H6 08-10 0.5/0.5-1.5 110D042SW -
Streetfighter/S /848 F1 09- 1.0/1.0 110D037 -
Harley-Davidson
XL 883/1200 1) XL1/XL/2 82-03 21.0/3.0 110HD01.1 -
XL 883/1200, Sozius XL1/XL/2 82-03 - 110HD01.2 -
Soziuseinheit (Montage an der Schwinge) empfehlenswert, aber nicht zwingend erforderlich. Wenig Platz für die Füße des Beifahrers
passenger unit advisable (mount on swing fork) but not reqired, there will be less space for the passenger feet
Forty Eight 1) 2) XL2 10- 42.0/1.0 110HD19 colour: silver
Forty Eight 1) 2) XL2 10- 42.0/1.0 110HD19SW colour: black
XL883/1200 Sportster 1) 2) 3) XL2 04- 17.0/0.5 110HD19 colour: silver
XL883/1200 Sportster 1) 2) 3) XL2 04- 17.0/0.5 110HD19SW colour: black
XR 1200 XR1 08- 0.5/0.0 110HD22 -
1)
nur mit 2 in 1 Auspuffanalge/2 in 1 exhaust only 2) kein Soziusbetrieb möglich/single seat use only 3) nur Modelle ohne ABS/without ABS only
Honda
CBR 600F PC35 99-06 1.5/1.0 110H086 -
CB 750 Seven Fifty RC42 92-02 7.0/3.5 110H051 -
CBR 900RR SC28 92-93 1.0/4.0 110H047 -
CBR 900RR SC28/33 94-97 1.0/4.0 110H059 -
CBR 900RR SC33 98-99 1.0/4.0 110H082 -
CBR 900RR SC44 00-01 1.5/0.5 110H090 -
CBR 900RR SC50 02-03 1.5/0.5 110H096 -
Hyosung
GT 650R GT650 05-06 1.0/-1.0 110HY01 -
Kawasaki
W 650 EJ650A 99-02 11.5/1.0 110K086 -
ER-6n/f* ER/EX650A 05-08 0/-1.0-2.0 110K113 -
ER-6n/f* ER/EX650C 09-11 0.5/0.5-1.5 110K133 -
ZXR-750/ZX-7R ZX750J/L/N 91-98 4.5/3.5 110K050 -
Z 750 ZR750J 04-06 3.0/1.0 110K102 -
Z 750 Fersenschutz ZR750J 04-06 - 110K102FS -
Z 750 /R ZR750L/N 07- 1.5/0.5 110K124 -
W 800 EJ800A 11- 10.0/1.0 110K137 -
* kein Soziusbetrieb möglich/single seat use only
61
cont
» LSL-Rear Sets
Model Type Year Offset Item No. Brake hose
X/Y
Kawasaki
ZX-9R ZX900B 94-97 4.5/3.5 110K061 -
ZX-9R ZX900C 98-99 4.0/1.0 110K084 -
ZX-9R ZX900E 00-03 4.0/1.0 110K091 -
Z 1000 J/R KZT00J/R 81-83 7.5/2.0 110K007 -
Z 1000 no passenger ZRT00A 03-06 3.0/1.0 110K102 -
Z 1000, passenger ZRT00A 03-06 0.0/0.0 110K102.2 -
Z 1000 ZRT00B 07-09 1.5/0.5 110K124 -
ZRX 1100/1200 ZRT10C/20A 97-07 6.5/4.0 110K082 225BS48AB
Moto Guzzi
V7 Classic LW 09- 7.5/1.5 110M018SW -
Le Mans 850/1000S VE/VF/VV alle/all 12.0/3.5 110M001 225BS80EB2G19
Die vordere Bremse muss zum Doppelscheiben-Betrieb umgerüstet werden, hinten ist die Umrüstung 241M001 erforderlich
Front brake has to be changed to double brake disk system, rear brake has to be changed to system 241M001
MV Augusta
Brutale 750 F4 alle/all 1.0/0 110MV03SW -
F4 750S F4 alle/all 1.0/0 110MV03SW -
Suzuki
GSF 600N/S GN77B/WVA8 95-04 5.8/4.0 110S064 -
GSX-R 600 AD 97-00 3.5/2.7 110S063 -
GSX-R 600 WVBG 01-03 2.0/0.5 110S082 -
GSX-R 600 WVB2 04-05 2.0/0.5 110S097 -
GSX-R 600 WVCE 06-07 0.5/0.5 110S108 -
GSX-R 600 WVCV 08-10 0.5/0.5 110S108 -
GSX-R 600 C3 11- 0.6/3.3 110S127 -
GSF 650N/S WVB5 05-06 5.8/4.0 110S064 -
SV 650N/S AV 99-02 3.5/2.7 110S075 -
SV650N/S WVBY 03-04 6.5/2.5 110S091 -
SV 650N/S WVBY 05-08 1.5/3.0 110S091 220BS40AB
GSF 650N/S WVCJ/CZ 07- 3.0/0.5 110S117 -
GSR 750 C5 11- 2.0/3.0 110S126 -
GSX-R 750 GR7DB 96-99 3.5/2.7 110S063 -
GSX-R 750 WVBD 00-03 2.0/0.5 110S082 -
GSX-R 750 WVB3 04-05 2.0/0.5 110S097 -
GSX-R 750 WVCF 06-07 0.5/0.5 110S108 -
GSX-R 750 WVCW 08-10 0.5/0.5 110S108 -
GSX-R 750 C4 11- 0.6/3.3 110S127 -
TL 1000 S AG 97-00 3.5/2.7 110S065 -
TL 1000 R AM 98-99 3.5/2.7 110S072 -
SV 1000N/S WVBX 03-05 2.0/0.5 110S093 225BS42AC
GSX-R 1000 WVBL 01-02 2.0/0.5 110S082 -
GSX-R 1000 WVBZ 03-04 2.0/0.5 110S082 -
GSX-R 1000 WVCL 07-08 2.5/2.2 110S114 -
GSF 1200N/S GV75A/WVA9/CB alle/all 5.8/4.0 110S064 -
GSF1250N/S & GSX1250F WVCH 07- 3.0/0.5 110S117 -
B-King WVCR 08-10 1.5/1.0 110S119 -
GSX 1300R Hayabusa WVA1 99-07 3.5/2.0 110S077 -
GSX 1300R Hayabusa WVCK 08- 2.5/2.0 110S120 225BS47AB
Triumph
TT600/Speed 4/
alle/all 00-05 2.0/2.5 110T022 -
Daytona 600/650
Bonneville 908MD/986MF 02- 12.0/3.0 110T024 -
Bonneville, hinten 908MD/986MF 02- - 110T024.2 -
Thruxton 900 986ME/2 05- -3.7/0.4 110T031 -
T-Bird Sport T309RT alle/all 3.0/1.5 110T020 -
Daytona/Speed Triple T509/595 97-98 1.5/1.2 110T014 -
Daytona/Speed Triple T509/595 99-01 1.5/1.2 110T017 -
Daytona/Speed Triple 595N 02-04 1.5/1.2 110T025 -
Yamaha
SR 500 2J4/48T 78-99 12.0/4.0 110Y033 -
YZF-R6 RJ03 99-02 1.5/0.5 110Y079 -
YZF 750R/SP alle/all 93-96 3.0/2.7 110Y054 -
TRX 850 4UN 95-00 3.0/2.7 110Y071 -
YZF 1000R 4VD 96-00 3.0/2.7 110Y070 -
YZF-R1 RN01/04 98-01 1.0/0.5 110Y077 -
FZS 1000 Fazer RN06/14 01-05 4,5/0.5 110Y086 -
XJR 1200/1300* 4PU/RP02/06/10/19 95- 4.5/3.2 110Y073 225BS59AD
V-Max alle/all 85-04 10.0/2.5 110Y044 225BS68BC
V-Max, Sozius alle/all 85-04 110Y044.2 -
Rastenhalterung klappbar/foldable fot peg unit
black 110-GLKSW
silver 110-GLKSI
* Caution: Side stand needs to be removed or modified.
Where brake lines are stated in the fitting table, please order these at the same time. This is required to enable the fitting of the LSL System foot rest kit.
All LSL System components are of course available as replacement parts.
62
tent
» LSL-Performance:
Please order foot pegs and foldable
foot peg linkings separately. !
· All aluminium parts anodised for weather protection.
· 17mm wide long life PTFE bushings
· Foldable pegs optional
· Bolts made of stainless steel
· Road legal equipment
Equipped as standard the LSL-rear set will

be delivered with fixed foot peg linkings.
You will find the matching foot pegs on page 64. For universal use LSL offers a kit to mount pegs to
any hanger. The foldable adaptation is precisely
engineered out of aluminium. Spring and washers
are stainless.
63
cont
» Foot Pegs
! Please order the foot peg linkings in addition.

You will find them in table on page 76.
LSL-aluminium foot pegs

LSL-foot pegs are extremely light and machined from The surface is knurled for extra grip and all sharp edges
billet aluminum. The foot peg is shaped and designed are rounded for safety reasons. Precisely machined
for optimum strength. adaptors provide fitment to most modern bikes.
» Foot peg Sport, length 85mm » Foot peg Racing, length 70mm » Foot peg Extreme, length 78mm
Type Surface Colour Item No.
Rastenkörper Sport/foot pegs sport

Sport eloxiert silver 115-01SI
Sport eloxiert black 115-01SW
Sport eloxiert titan 115-01TI
Sport eloxiert blue 115-01BL
Sport eloxiert red 115-01RT
Sport eloxiert gold 115-01GO
Rastenkörper Racing/foot pegs racing
Racing eloxiert silver 115-03SI
Racing eloxiert black 115-03SW
Racing eloxiert titan 115-03TI
Racing eloxiert anthracite 115-03AN
Racing eloxiert blue 115-03BL
Racing eloxiert red 115-03RT
Racing eloxiert gold 115-03GO
Rastenkörper Extreme/foot pegs extreme
Extreme eloxiert black 115-04SW
64
tent
Improve the foot position through our

adjustable foot rests:
Foot peg linkings for your motorcycle you
will find in table on Page 76 and following. !
With this kit, sport riders and touring riders can
improve their seating position. Both, a raised or a
comfortably lowered position are possible. The actual
position is quickly adjusted with an Allen key, so you
can change it on the fly if you choose so.
How it works: The adjustment allows for 8 individual
positions around a radius of 25mm (1”) to create the
perfect individual set up for you.
The kit is delivered without the actual pegs. For a peg
that suits your bike, please check availability for your
model at LSL.eu or contact our colleagues for specific
advice. Of course, all components are approved to
German ABE standards.
» Foot peg linking for standard mounting » Adjustable foot peg linking for standard mounting
65
cont
» Footwork
! Please order foot pegs separatly, types

and colours you will find on Page 64.
Pillion peg mounting kit

Pillion foot pegs made from anodised billet aluminum
are available for a variety of naked bikes. They are
sturdier than the standard ones and look better too.
The mounting of the foldable pegs is made from high
quality billet aluminium. The pegs need to be ordered
separately from mounting and foldable brackets.
Foldable peg adaptation set

For universal use LSL offers a kit to mount pegs to any Model Year Item No.
hanger. The foldable adaptation is precisely engineered
Suzuki
out of aluminium. Spring and washers are stainless.
GSF 650/1250 alle/all 117S117
For fastening M8 screws are used. GSF 1200 01- 117S085
Triumph
Street Triple* alle/all 117T041
Speed Triple 1050* 05-10 117T033
Speed Triple 1050* 11- 117T046
* nur möglich mit unten verlegter Auspuffanlage/lower exaust system only
Yamaha
XJR 1200/1300 alle/all 117Y073
klappbare Rastengelenke/foldable peg adaptation
Paar/pair 110-UNI
Model Model Shift Shift/

Year Brake
Aprilia
RSV 4 APRC all 110A023.1 -
RSV 4 APRC revers all 110A023.1R -
Buell
M2 all 110BU01/1 110BU01/2
X1 all 110BU03/1 110BU03/2
Suzuki
GSF 650 07- 110S117/1 -
GSF/GSX 1250 07- 110S117/1 -
Triumph
Thruxton all 110T031/1 110T031/2
Einzel- und Ersatzteile/individual parts and spare parts
Hebelknauf/lever knob 111-001SI 111-002SI
Triumph Extreme mit Verzahnung/geared
Scrambler Extreme
Scrambler/Bonneville 110T038EX -
Machined gear shifts

To replace the original which lacks of a lot of play, we
offer a gear/brake-unit. The lever is pivoted on a pre-
cisely machined axle. A brake lever can be added in
the same design. Coloured LSL foot pegs also match
the lever unit.
66
tent
» Lift Up
Lifter Item No.
M6
LSL-Lifter – practical contact rollers for mounting stand anthracite 680LB06AN
silver 680LB06SI
We all know the hassle of bringing the gripper of the assembly stand into gold 680LB06GO
the small retaining studs. Racing teams in endurance racing have been using M8
anthracite 680LB08AN
large guide rollers for many years, through which the engaging of the lift silver 680LB08SI
is easy to achieve. gold 680LB08GO
green 680LB08GR
LSL offers this experience from endurance racing for your motorbike with M8 + 10mm spacer*
the LSL Lifter. These large guide rollers (diameter: 56mm) are finished in anthracite 680LB08DAN
wear-resistant plastic and come with visually attractive coloured bolted silver 680LB08DSI
gold 680LB08DGO
mounting sleeves. * K it 10 mm distance
Triumph Daytona 11, Tiger 800, etc.
All lifters are supplied with an 8mm high spacer. Different threads are used M10 x 1.25
for bolting. Check which thread is required for your motorbike. anthracite 680LB10AN
silver 680LB10SI
gold 680LB10GO
green 680LB10GR
67
cont
68
tent
» Crash Protection
Uli Bonsels, Service Manager Germany comments his

race crash at the Street Triple Cup
„Dank eurer tollen Crash Pads blieb mein Motorrad, man
mag es kaum glauben, fast unbeschädigt und ich konnte
das Rennen sofort wieder aufnehmen. Die Crash Pads an
Motor, Vorder- und Hinterachse, das Lenkerendgewicht
und die Fußraste haben ganze Arbeit geleistet und jeg-
lichen Schaden vom Motorrad fern gehalten.
So soll es sein!“
Crash Pad – the alternative to simple and

ugly looking nylon mushrooms.
Our new LSL-Crash Pad is a combination of shiny The plastic insert reduces the impact when the bike
aluminium with a replaceable plastic insert. The alloy falls over and slows the bike down when it is sliding.
part is machined and has a very smooth surface that In the case of a small crash simply replace the plastic
is either anodised or powder/transparent coated de- insert for repair.
pending upon colour. The rounded shape prevents the
The availability of different colours and surfaces
pad hooking into the tarmac or street surface.
allows coordination with the bike‘s original colours.
69
cont
» Crash Protection
The backward located “touch-down” area, of the plastic

inserts steers the bike whilst it is sliding, preventing the
bike from spinning. There is less risk of overturning and
thereby reduced damage to the bike.
A 3D computer simulation shows the basis of the design
concept and shows colourfully the force/impact the pad
absorbs. Incident records of many years confirm this
function.
The Crash Pads are available with very solid mounting
kits for most bikes. The range of Crash Pads is always
expanding, please enquire if your model is not listed.
We supply Crash Balls for axle protection in the same
unique design.
Crash Pad: choose shape and colour
Crash Pad Crash Pad Classic Crash Pad Plastic
Depending on the model, LSL offers different fitting kits. See fitment guide for your bike.
DS RA MA
Fastening with engine bolts at the frame. Adapter plate mounting on the frame; Adapter plate mounted over engine covers.
avoids damage by the engine bolt.
Pad insert comes separately as spare part. The logo printing shows
the right side to mount.
70
tent
Crash Pad Heads
! Crash Pads + Balls* Surface Order-Info Material Colour Surface Item No.
black ..SW anodised Item No. + SW Crash Pad

Aluminium black anodised 550-002SW
titan ..TI anodised Item No. + TI
Aluminium titan anodised 550-002TI
silver ..SI anodised Item No. + SI Aluminium silver anodised 550-002SI
Aluminium gold anodised 550-002GO
gold ..GO anodised Item No. + GO
Aluminium yellow powder-coated 550-002GE
yellow ..GE powder covered Item No. + GE Aluminium orange powder-coated 550-002OR
Aluminium red powder-coated 550-002SR
orange ..OR powder covered Item No. + OR
Aluminium green powder-coated 550-002GR
signalred ..SR powder covered Item No. + SR Aluminium white powder-coated 550-002WT
Aluminium blue transp. coated 550-002BL
green ..GR powder covered Item No. + GR
Aluminium red transp. coated 550-002RT
white ..WT powder covered Item No. + WT Aluminium carbon-look dipping coated 550-002CA
Aluminium chromed 550-002CR
stain-red ..RT transparent covered Item No. + RT Plastic reinforced black, matt 550-002PT
stain-blue ..BL transparent covered Item No. + BL Crash Pad Classic
Aluminium black anodised 551-001SW
chrome ..CR chromed Item No. + CR Aluminium chromed 551-001CR
carbon-look ..CA dip-coated Item No. + CA Crash Pad Ersatzteile/spare parts
Plastic reinforced black right 554-SP2/R
* Achs Balls are not chromed and as carbon-look available
Plastic reinforced black left 554-SP2/L
Crash Pad Montagekits/assembling kits
wählen Sie aus der folgenden Tabelle/choose out of following table
Crash Pad Mounting Kits

Brand and Model Type Year Crash Pad Mounting Kits Axle Ball Kits
/... = also this model l/r: the fairing has to be drilled on the left and/or right side incl. Crash Balls
(ABS) = also with ABS
ABS = only with ABS directly screwed screwed with adapter plate front rear
MA: across engine cover
RA: with engine bolts at the frame
Aprilia
SMV 750 Dorsoduro /Shiver SM/RA 08-/07- - 550A019 - - - 555A019+colour 556A019+colour
N850 Mana RC 07- - - - - - 555A019+colour 556A019+colour
Tuono/RSV1000R/Fact./Nera RR 06- - 550A015.1 - - - 555A019+colour 556A019+colour
RSV 4 /Tuono V4R RK/TY 10-/11- - - RA - 550A022.1 555A019+colour -
Benelli
TNT 1130 all - - RA - 550BE01 - -
BMW
F 800S /R E8ST 06- - - RA - 550B032 555B030+colour -
F 800ST E8ST 06- - - RA l/r 550B035 555B030+colour -
S1000 RR K10 09-11 - 550B040 RA - 550B040.1 555B040+colour 556B040+colour
S1000 RR K10 12- r 550B040 - - - 555B040+colour 556B040+colour
K1200R K12R 05- - 550B029 - - - - -
Buell
M2/X1 all all - - RA - 550BU01 - -
XB-9R /S XB12R /S /Ulysses all all - - MA - 550BU04 555BU04+colour 556BU04+colour
Cagiva
Raptor 1000 all all - 550C003 - - - - -
Ducati
Monster 600 M/M3 all - 550D018 - - - - -
Monster 696 M5 08- - 550D036 - - - 555D027+colour 556KT07+colour
749 /R /S H5 all - - - - - 555D027+colour 556D027+colour
Monster 900 /i. E. M/M2 -01 - 550D015 - - - - -
Monster 900/1000 M4 02- - 550D023 - - - - -
999 /R /S /Xerox H4 all - - - - - 555D027+colour 556D027+colour
1098 /R /S /Bayliss LE H7 all - - - - - 555D037+colour* -
Monster 1100 /S /EVO M5 09- - 550D036 - - - 555D027+colour -
Monster S4 /S2R /S4R M4 all - 550D030 - - - - -
Multistrada 1200 /S A2 10- - 550D037 - - - 555D037+colour -
Hypermotard 1100 /S B1 -12 - 550D023 - - - 555D027+colour* 556D038+colour
Streetfighter 848 /1098 /S F1 09- - 550D037 - - - 555D037+colour* -
*nur Showa Gabel/Showa fork only
71
cont
» Crash Protection
Honda
CBR 125 JC34 04-06 - - RA - 550H109 - -
CBR 125 JC39 07-10 - - RA - 550H120 - -
CBF 500 PC39 all - 550H102 - - - - -
CB 500 FA PC45/2/1 13- - 550H143 MA - 550H142.1 - -
CBR 500 RA PC44/2/1 13- - - MA - 550H142.1 - -
Hornet 600 PC34 02-06 - 550H080 - - - - -
Hornet 600 PC41 07- - 550H118 MA - 550H140.1 555H111+colour -
CBF 600 N/S PC38 05-07 - 550H080 - - - 555H111+colour -
CBF 600 N/S PC43 08- - 550H122 - - - 555H111+colour -
CBR 600F PC25 /31 91-95 l/r 550H046 - - - - -
CBR 600F PC35 99-06 l/r 550H086 - - - - -
CBR 600F PC41 11- l/r 550H137 MA - 550H140.1 555H111+colour -
CBR 600RR PC37 03-06 l/r 550H099 - - - 555H099+colour 556H090+colour
CBR 600RR PC40 07- l/r 550H117 - - - 555H111+colour 556H103+colour
CBR 600RR PC40 07-08 l/r 550H117 MA - 550H117.1 555H111+colour 556H103+colour
CBR 600RR ABS PC40 09- l/r 550H132 - - - 555H111+colour 556H103+colour
NC 700 S /X Crosstourer RC61 /RC63 12- - - MA - 550H138.1 - -
Hornet 900 SC48 all - - MA - 550H097 - -
CBR 900RR SC28 /SC33 92-99 l/r 550H047 - - - - -
CBR 900RR SC44 /SC50 00-03 - 550H090 - - - 555H090+colour 556H090+colour
CBR 900RR SC50 06-09 - 550H090 - - - 555H090+colour 556H090+colour
CBF 1000 SC58 all - 550H111 - - - 555H111+colour -
CBF 1000F SC64 10- - 550H127 - - - 555H111+colour -
CB 1000R SC60 08- - 550H127 - - - 555H111+colour -
CBR 1000RR SC57 04-05 - - RA - 550H103 555S099+colour 556H103+colour
CBR 1000RR SC59 06-07 - - RA - 550H125 - 556H103+colour
CBR 1000RR SC59 08- - - MA - 550H125.1 555H125+colour 556H103+colour
CBR 1000RR ABS SC59 09- - - MA - 550H131.1 555H125+colour 556H103+colour
VTR 1000F SC36 all - - RA - 550H075 555H099+colour 556H103+colour
VTR 1000-SP1 SC45A all l/r 550H093 - - - - -
X11 SC42 all - 550H091 - - - - -
CBR 1100XX SC35 10- l/r 550H074 - - - 555H111+colour -
CB 1100 SC65 13- - - MA - 550H141 - -
VFR 1200FD DSG /DCT SC63 10- - - - - - 555H125+colour -
VFR 1200F SC63 10- - - MA - 550H133.1 555H125+colour -
CB 1300F /S SC54 all - - MA - 550H101 - -
Husqvarna
SM 510R A2 09- - - - - - 555HU01+colour 556HU01+colour
Nuda 900 /R A7 12- - 550HU02 - - - 555HU02+colour 556HU02+colour
Hyosung
GT 650R /S GT650 all l/r 550HY01 - - - - -
Kawasaki
Ninja 250R /SE EX250K 08- - - RA - 550K132.1 - -
Ninja 300 ABS EX300A 13- - - RA L/r 550K145.1 - -
ZXR-400 ZX400L all - 550K053 - - - - -
ZX-6R ZX600J /636A 00-02 l/r 550K098 - - - - -
ZX-6R ZX636B 03-04 - 550K101 - - - 555K101+colour 556K101+colour
ZX-6RR ZX600K 03-04 - 550K101 - - - - -
ZX-6R ZX636C 05-06 l 550K107 RA - 550K107.1 555K101+colour 556K107+colour
ZX-6RR ZX600N 05-06 l 550K107 RA - 550K107.1 - -
ZX-6R ZX600P 07-08 - - RA - 550K120.1 555K101+colour 556K107+colour
ZX-6R ZX600R 09-12 l/r 550K131 RA - 550K131.1 555K131+colour 556K107+colour
ZX-6R 636 ZX600E 13- - 550K146 - - 550K146.1 555K126+colour 556K107 +colour
ER-6n ER650A 05-08 - - RA - 550K113 - -
ER-6f EX650A 06-08 - - RA l/r 550K117 - -
ER-6n ER650C 09- - - RA - 550K133 - -
ER-6F EX650C 09-11 - - RA l/r 550K134 - -
ER-6n /f ER650E /EX650E 12- - - - - 550K140.1 - -
Versys 600 LE650A 07- - - - RA - 550K113 - -
Z 750 /S ZR750J 04-06 - - MA - 550K104 - -
Z 750 /ABS ZR750L 07- - - RA - 550K124 - -
Z 750R Z750N 11- - - RA - 550K124 555K126+colour -
Z 800 ZR800A 13- - - RA - 550K144.1 555K144+colour -
ZX-9R ZX900E 00-01 l/r 550K091 - - - - -
ZX-9R ZX900EF 02- - 550K099 - - - - -
Z 1000 ZRT00A 03-06 - 550K102 RA - 550K104 - -
72
tent
© Friedrich Weisse -msd-
Kawasaki
Z 1000 ZRT00B 07-09 - - RA - 550K124 555K126+colour 556K126+colour
Z 1000 ZRT00D 10- - 550K135 RA - 550K135.1 555K135+colour 556K135+colour
Z 1000SX /Tourer ABS ZXT00G 11- l/r 550K138 RA - 550K138.1 555K135+colour 556K135+colour
Versys 1000 LZT00A 12- - 550K143 - - - 555K126+colour -
ZX-10R ZXT00C 04-05 - - RA l/r 550K105 555K105+colour 556K105+colour
ZX-10R ZXT00D 06-07 - - RA - 550K114 555K105+colour 556K105+colour
ZX-10R ZRT00E 08-10 l 550K127 RA - 550K127.1 555K101+colour 556K105+colour
ZX-10R ZRT00J 11- - 550K136 RA - 550K136.1 555K131+colour 556K107+colour
ZRX 1100 /1200 ZRT10C /20A all - - MA - 550K096 - -
ZZR 1200 ZXT20C all - - RA - 550K100 - -
ZZR 1400 ZXT40A /C 06-11 - - RA - 550K115 555K131+colour -
ZZR 1400 ZXT40E 12- - - - - - 555K131+colour -
1400 GTR ZGT40A /C 08- - - - - - 555K101+colour -
KTM
690 Duke DUKE 08- - - - - - 555KT11+colour 556KT07+colour
990 SuperDuke LC8EFI 05- - - RA - 550KT07.1 555KT07+colour 556KT07+colour
991 SuperDuke LC8EFI 09- - - - - - 555KT07+colour 556KT07+colour
950 Supermoto /R LC8SM 06- - - RA - 550KT07.1 - -
990 Supermoto T LC8SM all - - RA - 550KT10.1 555KT07+colour 556KT07+colour
1190 RC 8 RC8 08- - - - - - - 556KT07+colour
Moto Morini
Corsaro 1200 /Scrambl. 1200 01/02 all - 550MM01 - - - - -
MV Augusta
F4 Brutale S -09 - 550MV03 - - - - -
MZ
MZ 1000S /SF /SFs MZ1000 all - - RA - 550MZ01 - -
Suzuki
DR-Z 400 SM WVB8 all - - - - 555S104+colour 556S104+colour
GSF 600 GN77B 95-99 - 550S064 R/M - 550S064.1 - -
GSF 600 JS1A8 00-04 - 550S064 R/M - 550S064.1 - -
GSX-R 600 AD/WVBG 97-03 l 550S082 - - - - -
GSX-R 600 WVB2 04-05 - 550S094 RA - 550S097.1 555S097+colour 556S097+colour
GSX-R 600 WVCE/WVCV 06-10 l 550S108 MA - 550S108.1 555S099+colour 556S099+colour
GSX-R 600 C3 11- l/r 550S127 MA - 550S127.1 555S127+colour -
GSR 600 WVB9 06- - 550S107 RA - 550S107.1 - -
GSF 650/A/S/SA Bandit (ABS) WVB5 05-06 - - R/M - 550S064.1 - -
GSF 650A /SA Bandit ABS WVCJ/WVCZ 07- - - MA - 550S117.1 - -
73
cont
» Crash Protection
Suzuki
SV650 /S AV -02 - 550S075 - - - - -
SV650 /A /S /SA (ABS) WVBY 03- - 550S091 RA - 550S091.1 - -
GSX 650F /FA (ABS) WVCJ 09- - - MA - 550S125.1 - -
SFV 650 /A Gladius (ABS) WVCX 09- - - RA - 550S124.1 - -
GSR 750 C5 11- l 550S126 RA - 550S126.1 555S127+colour -
GSX-R 750V WVBD 97-03 - 550S082 - - - - -
GSX-R 750 WVB3 04-05 - - RA - 550S097.1 555S097+colour 556S097+colour
GSX-R 750 WVCF /WVCW 06-10 l 550S108 MA - 550S108.1 555S099+colour 556S099+colour
GSX-R 750 C4 11- l/r 550S127 MA - 550S127.1 555S127+colour -
TL 1000S AG all - 550S065 - - - - -
SV 1000 /S WVBX 03- - 550S093 RA - 550S093.1 555S097+colour 556S097+colour
GSX-R 1000 WVBL 01-02 l 550S088 RA - 550S088.1 - -
GSX-R 1000 WVBZ 03-04 - 550S094 - - - 555S097+colour 556S099+colour
GSX-R 1000 WVB6 05-06 l 550S099 RA - 550S099.1 555S099+colour 556S099+colour
GSX-R 1000 WVCL 07-08 - 550S114 RA - 550S114.1 555S099+colour 556S099+colour
GSX-R 1000 WVCY 09- l/r 550S123 MA - 550S123.1 555S099+colour -
GSF 1200 /A /S /SA Bandit (ABS) GV75A/WVA9/WVCB all - 550S064 RA /MA - 550S064.1 - -
GSX 1200 Inazuma A3 all - 550S064 RA /MA - 550S064.1 - -
GSF 1250/A/S/SA Bandit (ABS) WVCH 07- - - MA - 550S117.1 555S099+colour 556S099+colour
GSX 1250FA ABS WVCH 10- - - MA - 550S125.1 555S099+colour 556Y088+colour
GSX 1300BK /BKA B-King (ABS) WVCR 07- l/r 550S119 RA - 550S119.1 555S099+colour 556S099+colour
GSX 1300R Hayabusa WVA1 99-07 l/r 550S077 - - - - -
GSX 1300R /RA Hayab. II (ABS) WVCK 08- l/r 550S120 - - - 555S099+colour -
GSX 1400 WVBN all - - MA - 550S089 - -
Triumph
TT600 806AD all l/r 550T022 - - - - -
Speed Four 806LB all - 550T028 - - - - -
Daytona 600 806LW 03-05 l/r 550T029 - - - - -
Daytona 675 D67LC 06- - - RA - 550T037 555T037+colour 556T037+colour
Daytona 675 R D67LC 11-12 - - RA - 550T037 - 556T037+colour
Daytona 675 R H67 13- - - RA - 550T055.1 555T037+colour 555T037+colour
Street Triple 675 D67LD 07- - - RA - 550T041 - -
Street Triple 675 D67LD 08-12 - - RA - 550T041 555T037+colour 556T037+colour
Street Triple 675 L67LR 13- - - - - - 550T053.1 555T037+colour 556T037+colour
Tiger 800 (ABS) A08 11- - - RA l/r 550T047.1 555T037+colour 556T047+colour
Thruxton 900 & Bonneville 986ME/908MD/MF alle - - MA - 550T024 - -
Scrambler 986MG /2 alle - - MA - 550T024 - -
Thunderbird /Sport T309RT /309RD all - 550T020 - - - - -
Sprint RS /ST (ABS) T695/AB/C/215NA 00- - - RA l/r 550T018 - -
Daytona T 595 /955i T595 97-01 - - RA l/r 550T017 555T027+colour -
Daytona T 955i 595N 02- - - RA l/r 550T025 555T027+colour -
Speed Triple T509 all - - RA - 550T027 - -
Speed Triple 595N 97-04 - - RA - 550T027 555T027+colour -
Speed Triple 515NJ 05-07 - - RA - 550T033 555T033+colour -
Speed Triple (ABS) 515NJ 08-10 - - MA - 550T033.1 555T033+colour -
Speed Triple (ABS) 515NV 11 - - MA - 550T033.1 555T037+colour -
Speed Triple (ABS) 515NV 12- - - MA - 550T048.1 555T037+colour -
Tiger 1050 (ABS) 115NG 07-11 - - MA - 550T033.1 555T033+colour -
Tiger 1050 ABS 115NG 12- - - MA - 550T048.1 555T033+colour -
Yamaha
XJ 6 /Diversion (ABS) RJ19 09- - - RA l/r 550Y121 - -
YZF 600R Thundercat 4TV /4WD all - 550Y069 - - - - -
YZF-R6 RJ03 -02 l/r 550Y079 - - - - -
YZF-R6 /S RJ05 /09 03-05 - - RA - 550Y089 555Y088+colour 556Y088+colour
YZF-R6 RJ11 06-07 - - RA - 550Y104 555Y088+colour 556Y088+colour
YZF-R6 RJ15 08- - - RA - 550Y118 555Y088+colour 556Y088+colour
FZS 600 Fazer RJ02 -02 - 550Y078 - - - - -
FZ6 Fazer /S (ABS) RJ07 03- - 550Y093 - - - 555Y105+colour 556Y088+colour
FZ6 /Fazer /S2 (ABS) RJ14 07- - 550Y093 - - - 555Y105+colour 556Y088+colour
FZ8 /Fazer 8 (ABS) RN25 10- - 550Y106 RA - 550Y124.1 - 556Y088+colour
TRX 850 4UN all - 550Y071 - - - - -
TDM 850 3VD /4CM /4TX 96- - - RA - 550Y050 - -
TDM 900 (ABS) RN08 /11 /18 02-05 - - RA - 550Y092 - -
YZF 1000R Thunderace 4VD /4SV all - 550Y070 - - - - -
74
tent
Yamaha
YZF-R1 RN01 98-99 - - RA r 550Y077 - -
YZF-R1 RN04 00-01 - - RA r 550Y085 - -
YZF-R1 RN09 02-03 - 550Y088 - - - 555Y088+colour 556Y088+colour
YZF-R1 /SP RN12 04-06 - - RA - 550Y094.1 555Y088+colour 556Y088+colour
YZF-R1 RN19 07-08 - - RA - 550Y115.1 555Y088+colour 556Y088+colour
YZF-R1 RN22 09- l/r 550Y120 RA - 550Y120.1 555Y088+colour 556Y088+colour
FZS 1000 Fazer RN06 /14 all l/r 550Y086 - - - 555Y105+colour -
FZ1 /Fazer (ABS) RN16 06- - 550Y106 RA - 550Y106.1 555Y105+colour 556Y088+colour
BT 1100 Bulldog RP05 all - 550Y091 - - - - -
XJR1200 /1300 4PU/RP02/06/10 all - 550Y073 - - - - -
XJR1300 RP19 07- - 550Y073 - - - 555Y105+colour 556Y088+colour
VMX 1200 V-Max all all - 550Y044 - - - - -
FJR 1300 /A /AS RP04 /08 /11 -05 - - RA - 550Y087 - -
FJR 1300 /A /AS RP13 06- - - RA - 550Y111 - -
MT01 RP12 all - - - - - 555Y105+colour 556Y088+colour
MT01 /S RP18 all - - RA - 550Y101 555Y105+colour 556Y088+colour
Vmax RP21 09- - - - - - 555Y088+colour -
Crash Balls for axle protection

Same as Crash Pads we offer Crash Balls used for
the wheel axles. They will be clamped inside the
axle shaft and protect swinging arm or fork ends.
Colours are the same as mentioned before. Because
of weight we do not manufacture a stainless steel
version. The model range is expanding, please enquire
for your model.
You will find the matching

adapter kit in the table above. !
Modell
Model Typ
Type Baujahr
Year Art.-Nr.
Item No. Clutch Ball system
Triumph
Matching to the 2004 Yamaha R1 and Triumph‘s 675 LSL
Street Triple D67LD 07- 552T045+colour offers a clutch lever protector. Carried on a solid alumi-
Daytona 675 D67LC 06-12 552T045+colour nium stay to which we fasten the small Crash Ball head.
Yamaha
YZF- R1 RN12 04- 552Y094+colour
Farben wie Achs Balls/colours like axle protection balls
75
cont
» Model Specified Accessory
Brand and Model Type Year Lever
/... = also for this model-type +Colour (please add code to item-no.): silver: SI; anthracite: AN; black: SW; Gold: GO
(ABS) = also for models with ABS brake Standard with red adjust lever, optional other colours available, look at page 46/47
ABS = only for models with ABS brake
Clutch Lever Brake Lever
Aprilia
RS 250 Replica LD /LD01 95-01 - - - -
SL 750 Shiver /GT (ABS) RA 07- 200-L31+colour 200SL31+colour 200-R31+colour 200SR31+colour
SMV 750 Dorsoduro (ABS) SM 08- 200-L31+colour 200SL31+colour 200-R31+colour 200SR31+colour
NA 850 Mana /GT (ABS) RC 07- - - 200-R31+colour 200SR31+colour
ETV 1000 Capo Nord (ABS) PS 01-07 200-L13+colour 200SL13+colour 200-R22+colour 200SR22+colour
RSV 1000 /SP /R /Tuono ME /RP 95-00/01-04 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
RSV 1000R /Factory /Nera RR 04-07 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
RSV4 R /Factory /APRC RK 09- 200-L20+colour 200SL20+colour 200-R23R+colour 200SR23R+colour
SL 1000 Falco PA 01-05 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Tuono 1000 R /Factory RR 05-10 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Tuono V4 R /APRC TY 11- 200-L20+colour 200SL20+colour 200-R13+colour 200SR13+colour
Dorsoduro 1200 TV 11- 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Bimota
DB 6 Delirio /DB 5 R /S DB05 /06 06- /08- 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
YB 8 Furano 92-93 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
BMW
F 650GS E8GS 06- 200-L35R+colour 200SL35R+colour 200-R33+colour 200SR33+colour
F 800S /ST /R (ABS) E8ST 06- 200-L35R+colour 200SL35R+colour 200-R33+colour 200SR33+colour
F 800GS (ABS) E8ST 08- 200-L35R+colour 200SL35R+colour 200-R33+colour 200SR33+colour
F 800GS (ABS) w /hand-protect E8ST 08- - 200SL35R+colour - 200SR33+colour
S 1000RR ABS K10 10-11 200-L36+colour 200SL36+colour 200-R34R+colour 200SR34R+colour
S 1000RR K10 10-11 - - - -
S 1000RR ABS K10 12- 200-L36+colour 200SL36+colour 200-R34R+colour 200SR34R+colour
S 1000RR K10 12- - - - -
R 1100S R2S /R11S 98-06 - - - -
K 1200 S /R Sport (ABS) K12S /K12R 04-08 200-L34R+colour 200SL34R+colour 200-R33+colour 200SR33+colour
R 1200 GS /Adventure (ABS) R12 04-12 200-L34+colour 200SL34+colour 200-R33+colour 200SR33+colour
R 1200 GS handprotect /Advent. (ABS) R12 04-12 - 200SL34+colour - 200SR33+colour
R 1200 ST /R / S (ABS) R1ST /R12S 05-09/6-/07- 200-L34+colour 200SL34+colour 200-R33+colour 200SR33+colour
K 1300 GT (ABS) K12S 08- 200-L34R+colour 200SL34R+colour 200-R33+colour 200SR33+colour
K 1300 R /S (ABS) K12S 08- 200-L34R+colour 200SL34R+colour 200-R33+colour 200SR33+colour
Buell
Firebolt XB9R/S/Light./City X/XB12R XB1 03- 200-L11+colour 200SL11+colour 200-R20+colour 200SR20+colour
1125 R /CR XB3 09- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Cyclone M 2 /2-2 EB1 98-02 200-L11+colour 200SL11+colour 200-R17+colour 200SR17+colour
Lightning S 1 /S 1-2 /X1 /Millenium EB1 /BL1 98-02 200-L11+colour 200SL11+colour 200-R17+colour 200SR17+colour
Lightning XB 12 S TT /RRS/Ss/Ss Long XB2 /XB3 06- 200-L11+colour 200SL11+colour 200-R20+colour 200SR20+colour
Ducati
Monster 600 M /M3 95-01 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
600 Super Sport S 95-98 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
620 Super Sport i.E. V5 03-07 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Monster 620 i.E. /S /Dark M4 02-06 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Multistrada 620 A1 05-08 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 695 M4 07-08 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 696 M5 08- 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
748 /R /S H3 99-02 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
748 S /SP /Biposto 748 96-99 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
749 /R /S H5 02-07 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
750 Super Sport ZDM750SC /S 92-98 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 750 /i.E. M /M1 /M4 98-02 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 800 /S /S2R /Dark M4 03-07 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 796 M5 10- 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
848 /EVO H6 08- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Streetfighter 848 F1 12- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
900 Super Light /Super Sport S /ZDM906SC2 /3 91-98 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 900 M 93-99 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster 900 /i.E. M2 00-02 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
916 S /SP /Biposto 916 95-97 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
916 ST 4 S2 99-03 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Monster S4 /Fogarty /S4R M4 00-03 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
992 ST 3 /S (ABS) S3 04-07 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
1000 SS /DS V5 03-06 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Sport 1000 /S /Paul Smart LE C1 06-09 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
GT 1000 /Touring C1 07-10 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
76
tent
Footpeg Linking Lifter Model

Please order foot pegs separately, types and colours are listed on page 64/65 For dimensions and colours /... = also for this model-type
please look at page 67 (ABS) = also for models with ABS brake
standard adjustable pair
front rear front rear
115-T05 115-A01 114-T05 - check the possibility RS 250 Replica

115-S13 115-A03 114-S13 - 680LB06+colour SL 750 Shiver /GT (ABS)
- 115-A03 - - 680LB06+colour SMV 750 Dorsoduro (ABS)
115-S13 115-A03 114-S13 - 680LB06+colour NA 850 Mana /GT (ABS)
- - - - 680LB06+colour ETV 1000 Capo Nord (ABS)
- - - - 680LB06+colour RSV 1000 /SP /R /Tuono
115-S13 115-A02 114-S13 - 680LB06+colour RSV 1000R /Factory /Nera
115-S13 115-A02 114-S13 - 680LB06+colour RSV4 R /Factory /APRC
- - - - 680LB06+colour SL 1000 Falco
115-S13 115-A02 114-S13 - 680LB06+colour Tuono 1000 R /Factory
115-S13 115-A02 114-S13 - 680LB06+colour Tuono V4 R /APRC
- - - - 680LB06+colour Dorsoduro 1200
- - - - check the possibility DB 6 Delirio /DB 5 R /S

- - - - - YB 8 Furano
- - - - - F 650GS
115-B05 115-B06 114-B05 114-B06 - F 800S /ST /R (ABS)
- - - - - F 800GS (ABS)
- - - - - F 800GS (ABS) w /hand-protect
115-B07 115-B06 - 114-B06 680LB08+colour S 1000RR ABS
115-B07 115-B06 - 114-B06 680LB08+colour S 1000RR
115-B07 - - - 680LB08+colour S 1000RR ABS
115-B07 - - - 680LB08+colour S 1000RR
115-B03 - - - - R 1100S
115-B05 115-B06 114-B05 114-B06 - K 1200 S /R Sport (ABS)
- - - - - R 1200 GS /Adventure (ABS)
- - - - - R 1200 GS handprotect /Advent. (ABS)
115-B05 115-B06 114-B05 114-B06 - R 1200 ST /R /S (ABS)
- - - - - K 1300 GT (ABS)
115-B05 115-B06 114-B05 114-B06 - K 1300 R /S (ABS)
115-BU2 115-BU3 - - - Firebolt XB9R/S/Light./City X/XB12R

- - - - - 1125 R /CR
115-BU1 115-BU1 - - - Cyclone M 2 /2-2
115-BU1 115-BU1 - - - Lightning S 1 /S 1-2 /X1 /Millenium
- - - - - Lightning XB 12 S TT /RRS /Ss /Ss Long
115-D01 115-D02 114-D03 114-D03 - Monster 600

115-D01 115-D02 - - - 600 Super Sport
- - - - - 620 Super Sport i.E.
115-D03 115-D03 114-D03 114-D03 - Monster 620 i.E. /S /Dark
- - - - - Multistrada 620
115-D03 115-D03 114-D03 114-D03 - Monster 695
115-D06 115-D07 - - - Monster 696
115-D04 115-D03 114-D04 114-D03 - 748 /R /S
115-D04 115-D03 114-D04 114-D03 - 748 S /SP /Biposto
115-D04 115-D03 114-D04 114-D03 - 749 /R /S
115-D01 115-D02 - - - 750 Super Sport
115-D04 115-D03 114-D04 114-D03 - 750 Super Sport i.E.
115-D03 115-D03 114-D03 114-D03 - Monster 750 /i.E.
- - - - - 800 Super Sport i.E.
115-D03 115-D03 114-D03 114-D03 - Monster 800 /S /S2R /Dark
- - - - - Monster 796
115-D04 - 114-D04 - - 848 /EVO
115-D04 115-D04 114-D04 114-D04 - Streetfighter 848
115-D01 115-D02 - - - 900 Super Light /Super Sport
115-D03 115-D04 114-D03 114-D04 - 900 Super Sport i.E.
115-D03 115-D03 114-D03 114-D03 - Monster 900
115-D03 115-D03 114-D03 114-D03 - Monster 900 /i.E.
115-D04 115-D03 114-D04 114-D03 - 916 S /SP /Biposto
115-D01 115-D02 - - - 916 ST 4
115-D03 115-D03 114-D03 114-D03 - Monster S4 /Fogarty /S4R
115-D01 115-D02 - - - 944 ST 2
- - - - - 992 ST 3 /S (ABS)
- - - - - 1000 SS /DS
115-D04 - 114-D04 - - Sport 1000 /S /Paul Smart LE
115-D04 - 114-D04 - - GT 1000 /Touring
77
cont
Ducati
Monster 1000 /S /Dark /S2R M4 03-08 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Multistrada 1000 /S /S DS A1 03-06 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
996 /R /S H2 98-01 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
996 ST 4S (ABS) S3 01-06 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
Monster S4R M4 04-06 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
998 /R /S /Bayliss /Bostrom H2 02-03 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
999 /R /S /Xerox H4 03-06 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Monster S4R S M4 06 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Monster S4R /S Testar. /Tricolore M4 07-08 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Hypermotard 1100 /S B1 08- - 200SL25R+colour - 200SR23R+colour
Monster 1100 /S /EVO (ABS) M5 09- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Multistrada 1100 /S A1 07-09 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
1098 /S H7 07-08 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Streetfighter 1098 /S F1 09- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
1098 /R /S /SP /Bayliss LE /1198 H7 08-11 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
1199 Panigale /S H8 12- 200-L25R+colour 200SL25R+colour 200-R38R+colour 200SR38R+colour
Diavel /Carbon /Cromo /AMG G1 11- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Multistrada 1200 /S (ABS) A2 10- 200-L25R+colour 200SL25R+colour 200-R23R+colour 200SR23R+colour
Harley Davidson
V-Rod, Dyna, Softail, Sportster, XR1200 alle alle - - - -
Honda
CBR 125R JC34 /39 04-10 - - - -
CB 500 PC26 /32 94-96 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CB 500 /S PC32 97-03 200-L09R+colour 200SL09R+colour - -
CBF 500 (ABS) PC39 04-08 200-L14+colour 200SL14+colour 200-R14+colour 200SR14+colour
CB 500 RA /FA PC44 /45 13- 200-L39R+colour 200SL39+colour 200-R39R+colour 200SR39+colour
CB 600 F/S Hornet /Hornet-S PC34 98-01 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CB 600 F/S Hornet /Hornet-S PC36 02- 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
Hornet 600 PC36 03-06 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
Hornet 600 (ABS) PC 41 07- 200-L33+colour 200SL33+colour 200-R14+colour 200SR14+colour
CBF 600 N/S (ABS) PC 38 04-07 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CBF 600 N/S (ABS) PC 43 08- 200-L33+colour 200SL33+colour 200-R14+colour 200SR14+colour
CBR 600 F PC19 /23 /25 87-94 200-L14+colour 200SL14+colour 200-R14+colour 200SR14+colour
CBR 600 F PC31 /35 95-07 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CBR 600 F (ABS) PC 41 11- 200-L33+colour 200SL33+colour 200-R14+colour 200SR14+colour
CBR 600 RR PC 37 03-06 200-L15+colour 200SL15+colour 200-R15+colour 200SR15+colour
CBR 600 RR (ABS) PC 40 07- 200-L15+colour 200SL15+colour 200-R16R+colour 200SR16R+colour
NT 650 Hawk RC31 89-94 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
NC 700 SA /XA RC61 /63 12- 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CB 750 Seven Fifty RC 42 92-02 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
RVF 750 R RC45 94-97 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
VFR 750 F RC 36 90-97 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
VFR 800 F RC 46 98-01 200-L16+colour 200SL16+colour 200-R09+colour 200SR09+colour
VFR 800 F (ABS) RC 46 02- 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CB 900 F Hornet SC 48 01-05 200-L09R+colour 200SL09R+colour 200-R14+colour 200SR14+colour
CBR 900 RR SC28 /33 92-99 200-L14+colour 200SL14+colour 200-R14+colour 200SR14+colour
CBR 900 RR SC 44 00-01 200-L14+colour 200SL14+colour 200-R15+colour 200SR15+colour
CBR 900 RR SC 50 02-03 200-L15+colour 200SL15+colour 200-R15+colour 200SR15+colour
CB 1000 F SC30 93-96 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CB 1000 R (ABS) SC 60 08- 200-L16+colour 200SL16+colour 200-R16R+colour 200SR16R+colour
CBF 1000 /F (ABS) SC 58 /SC64 06- 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CBR 1000 F SC21/24 87-99 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CBR 1000 RR SC 57 04-07 200-L16+colour 200SL16+colour 200-R16R+colour 200SR16R+colour
CBR 1000 RR (ABS) SC 59 08- 200-L15+colour 200SL15+colour 200-R16R+colour 200SR16R+colour
VF 1000 F /F2 /R SC15/SC16 84-86 - - - -
VTR 1000 F SC 36 97-06 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
VTR 1000 SP-1 /SP-2 SC 45 00-05 200-L16+colour 200SL16+colour 200-R15+colour 200SR15+colour
Varadero 1000 (ABS) SD01 /SD02 99- - - 200-R09+colour 200SR09+colour
CB 1100 SF X-11 SC42 00-03 - - 200-R09+colour 200SR09+colour
CB 1100 C ABS SC65 13- 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CBR 1100 XX SC 35 97-07 200-L16+colour 200SL16+colour 200-R09+colour 200SR09+colour
ST 1100 Pan European (ABS) SC 26 90-02 200-L16+colour 200SL16+colour 200-R09+colour 200SR09+colour
VFR 1200F SC63 10- 200-L16+colour 200SL16+colour 200-R36+colour 200SR36+colour
VFR 1200FD mit DCT SC63 10- - - 200-R36+colour 200SR36+colour
CB 1300 F /S (ABS) SC 54 03- 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
CB-X4 1300 DC SC38 97-99 200-L16+colour 200SL16+colour 200-R14+colour 200SR14+colour
STX 1300 Pan European SC 51 03- 200-L16+colour 200SL16+colour 200-R09+colour 200SR09+colour
Husqvarna
Nuda 900 /R A7 12- 200-L35R+colour 200SL35R+colour 200-R23R+colour 200SR23R+colour
Hyosung
GT 650 R GT650 all - - - -
78
tent
115-D03 115-D03 114-D03 114-D03 - Monster 1000 /S /Dark /S2R

- - - - - Multistrada 1000 /S /S DS
115-D04 115-D03 114-D04 114-D03 - 996 /R /S
115-D01 115-D02 - - - 996 ST 4
115-D04 115-D03 114-D04 114-D03 - 996 ST 4S (ABS)
115-D03 115-D05 114-D03 - - Monster S4R
115-D04 115-D03 114-D04 114-D03 - 998 /R /S /Bayliss /Bostrom
115-D04 115-D03 114-D04 114-D03 680LB08+colour 999 /R /S /Xerox
115-D03 115-D03 114-D03 114-D03 - Monster S4R S
115-D03 115-D05 114-D03 - - Monster S4R /S Testastretta /Tricolore
- - - - - Hypermotard 1100 /S
115-D06 115-D07 - - - Monster 1100 /S /EVO (ABS)
- - - - - Multistrada 1100 /S
115-D04 - 114-D04 - - 1098 /S
115-D04 115-D04 114-D04 114-D04 - Streetfighter 1098 /S
115-D04 - 114-D04 - - 1098 /R /S /SP /Bayliss LE /1198
- - - - - 1199 Panigale /S
- - - - - Diavel /Carbon /Cromo /AMG
115-D06 - - - - Multistrada 1200 /S (ABS)
115-BU1 115-BU1 - - check the possibility V-Rod, Dyna, Softail, Sportster, XR1200
115-H09 115-H07 - - - CBR 125R

115-H01 115-H05 114-H01 - - CB 500
115-H01 115-H05 114-H01 - - CB 500 /S
115-H01 115-H06 114-H01 - - CBF 500 (ABS)
115-H01 115-H07 114-H01 - - CB 500 RA /FA
115-H01 115-H07 114-H01 - - CB 600 F/S Hornet /Hornet-S
115-H01 115-H06 114-H01 - - CB 600 F/S Hornet /Hornet-S
115-H01 115-H06 114-H01 - - Hornet 600
115-H01 115-H02 114-H01 114-H02 - Hornet 600
115-H01 115-H06 114-H01 - - CBF 600 N/S (ABS)
115-H01 115-H10 114-H01 - - CBF 600 N/S (ABS)
115-H01 115-H04 114-H01 - - CBR 600 F
115-H01 115-H02 114-H01 114-H02 - CBR 600 F
115-H01 115-H02 114-H01 114-H02 - CBR 600 F (ABS)
115-H01 115-H02 114-H01 114-H02 680LB08+colour CBR 600 RR
115-H01 115-H02 114-H01 114-H02 680LB08+colour CBR 600 RR (ABS)
- - - - - NT 650 Hawk
115-H01 115-H12 114-H01 114-H12 - NC 700 SA /XA
115-H01 115-H04 114-H01 - - CB 750 Seven Fifty
- - - - - RVF 750 R
- 115-H02 - 114-H02 - VFR 750 F
115-H01 115-H02 114-H01 114-H02 - VFR 800 F
115-H01 115-H02 114-H01 114-H02 - VFR 800 F (ABS)
115-H01 115-H06 114-H01 - - CB 900 F Hornet
115-H01 115-H02 114-H01 114-H02 - CBR 900 RR
115-H01 115-H02 114-H01 114-H02 - CB 1000 F
115-H01 115-H02 114-H01 114-H02 - CB 1000 R (ABS)
115-H01 115-H10 114-H01 - - CBF 1000 /F (ABS)
115-H01 115-H04 114-H01 - - CBR 1000 F
115-H01 115-H02 114-H01 114-H02 680LB08+colour CBR 1000 RR (ABS)
115-K03 115-K03 - - - VF 1000 F /F2 /R
115-H01 115-H02 114-H01 114-H02 - VTR 1000 F
- - - - 680LB08+colour VTR 1000 SP-1 /SP-2
115-H01 115-H02 114-H01 114-H02 - Varadero 1000 (ABS)
115-H01 115-H02 114-H01 114-H02 - CB 1100 SF X-11
115-H01 115-H12 114-H01 114-H12 - CB 1100 C ABS
115-H01 115-H02 114-H01 114-H02 - CBR 1100 XX
- - - - - ST 1100 Pan European (ABS)
115-H01 115-H11 114-H01 - - VFR 1200F
115-H01 115-H11 114-H01 - - VFR 1200FD mit DCT
115-H01 115-H02 114-H01 114-H02 check the possibility CB 1300 F /S (ABS)
115-H01 115-H02 114-H01 114-H02 - CB-X4 1300 DC
- - - - - STX 1300 Pan European
- 115-B06 114-HU1 114-B06 - Nuda 900 /R
115-HY1 28,95 28,95 - - check the possibility GT 650 R
79
cont
Kawasaki
Ninja 250R /SE EX250K 08- - - - -
ZXR 400 ZX400L alle 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ER-5 ER500A 97-05 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
GPZ 500S EX500A/D 87-03 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
Zephyr 550 ZR 550 B 91- 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
GPZ 600R ZX600A 85- - - 200-R17+colour 200SR17+colour
GPX 600R ZX600A/C 88- - - 200-R17+colour 200SR17+colour
ZX-6R Ninja ZX600F 95-97 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ZX-6R Ninja ZX600G 98-99 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ZX-6R Ninja ZX 600 J 00-01 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZX-6RR Ninja ZX600K 03-04 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZX-6RR Ninja ZX600N 05 200-L17+colour 200SL17+colour 200-R18R+colour 200SR18R+colour
ZX-6R Ninja ZX 600 P/R 07- 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
ZX-6R Ninja ZX 636 A 02 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZX-6R Ninja ZX 636 B 03-04 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZX-6R Ninja ZX 636 C 05-06 200-L17+colour 200SL17+colour 200-R18R+colour 200SR18R+colour
ZX-6R 636 ABS Ninja ZX636E 13 - 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
ER-6n /f (ABS) ER /EX650A 06-08 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ER-6n /f ABS ER /EX650C /E 09- 200-L08+colour 200SL08+colour 200-R32+colour 200SR32+colour
Versys (ABS) LE 650 A 07-08 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
Versys ABS LE650A /C 09- 200-L08+colour 200SL08+colour 200-R32+colour 200SR32+colour
W 650 EJ 650 A 99- 200-L38+colour 200SL38+colour 200-R17+colour 200SR17+colour
GPX /GPZ 750R ZX750G /F 85- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Z 750 /S ZR 750 J 04- 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
Z 750 ZR 750 L 07- 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
Z 750 ABS ZR 750 L 07- 200-L17+colour 200SL17+colour 200-R20+colour 200SR20+colour
Z 750R ABS ZR 750 N 11- 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
Z 750 Turbo ZX750E 84- - - - -
Zephyr 750 ZR750C 91- 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ZR-7 /S ZR750F 99-03 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ZX-7R /RR Ninja ZX750N 96-02 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZXR 750 /R ZX750H /J /L 89-94 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
W 800 EJ800A 11- 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
Z 800 ABS ZR800A 13 - 200-L17+colour 200SL17+colour 200-R20+colour 200SR20+colour
GPZ 900R ZX900A 84- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZX-9R Ninja ZX900B 94-97 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZX-9R Ninja ZX900C 98-99 200-L08+colour 200SL08+colour 200-R17+colour 200SR17+colour
ZX-9R Ninja ZX900E 00-03 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
KLV 1000 KLV1000A 04-05 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
Versys 1000 LZT00A 12- 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
Z 1000 ZRT 00 A 03-06 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
Z 1000 (ABS) ZRT 00 B 07-09 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
Z 1000 ABS ZRT 00 D 10- 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
Z 1000SX /Tourer ABS ZXT 00 G 11- 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
ZX-10 ZXT00B 88- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZX-10 R Ninja ZXT 00 C 04-05 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZX-10 R Ninja ZXT 00 D 06-07 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
ZX-10 R Ninja ZXT00E /F 08-10 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
ZX-10 R Ninja ZXT 00 J 11- 200-L17+colour 200SL17+colour 200-R21+colour 200SR21+colour
GPZ 1100 (ABS) ZXT10E 95-98 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Zephyr 1100 ZRT10A 92-98 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZRX 1100 ZRT10C 97-00 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZZR 1100 ZXT10C /D 90- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZRX 1200 /R /S ZRT20A 01-07 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
ZX-12R Ninja ZXT20A 00-06 200-L17+colour 200SL17+colour 200-R17+colour 200SR17+colour
ZZR 1200 ZXT20C 02- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
1400 GTR (ABS) (CBS) ZGT40A /C 08- 200-L23R+colour 200SL23R+colour 200-R21+colour 200SR21+colour
ZZR 1400 (ABS) ZXT40A /C /E 06- 200-L23R+colour 200SL23R+colour 200-R21+colour 200SR21+colour
KTM
690 Duke DUKE 08-11 200-L32R+colour 200SL32R+colour 200-R23R+colour 200SR23R+colour
990 SMT LC8SM 09- - - 200-R23R+colour 200SR23R+colour
990 Super Duke LC8EFI 05- 200-L32R+colour 200SL32R+colour 200-R23R+colour 200SR23R+colour
1190 RC 8 RC8 08- 200-L32R+colour 200SL32R+colour 200-R23R+colour 200SR23R+colour
Moto Guzzi
750 Nevada LM 03- - - 200-R22+colour 200SR22+colour
V11 KR /KS /KT 99-05 200-L12+colour 200SL12+colour 200-R12+colour 200SR12+colour
1200 Sport LP 07- 200-L13+colour 200SL13+colour 200-R22+colour 200SR22+colour
Moto Morini
Corsaro 1200 1 06- 200-L13+colour 200SL13+colour 200-R22+colour 200SR22+colour
MV Augusta
F4 750 F4 99-05 - - - -
Brutale 750 F4 01-05 - - - -
80
tent
115-K01 115-K02 114-K01 114-K02 680LB10+colour Ninja 250R /SE

115-K01 115-K02 114-K01 114-K02 - ZXR 400
115-K03 115-K04 - - - ER-5
115-K03 115-K04 - - - GPZ 500S
115-K01 115-K02 114-K01 114-K02 - Zephyr 550
115-K01 115-K02 114-K01 114-K02 - GPZ 600R
115-K01 115-K02 114-K01 114-K02 - GPX 600R
115-K01 115-K02 114-K01 114-K02 - ZX-6R Ninja
115-K01 115-K02 114-K01 114-K02 680LB10+colour ZX-6R Ninja
115-K06 115-K05 114-K06 114-K05 680LB10+colour ZX-6RR Ninja
115-K06 115-K05 114-K06 114-K05 680LB10+colour ZX-6RR Ninja
115-K06 115K05 114-K06 114-K05 680LB08+colour ZX-6R 636 ABS Ninja
115-K06 115-K05 114-K06 114-K05 680LB10+colour ER-6n /f (ABS)
115-K01 115-K05 114-K01 114-K05 680LB10+colour ER-6n /f ABS
115-K01 115-K05 114-K01 114-K05 680LB10+colour Versys (ABS)
115-K01 115-K05 114-K01 114-K05 680LB10+colour Versys ABS
- 115-K04 - - - W 650
115-K01 115-K02 114-K01 114-K02 - GPX /GPZ 750R
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 750 /S
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 750
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 750 ABS
115-K06 115-K05 114-K06 114-K05 680LB10+colour Z 750R ABS
115-K01 - 114-K01 - - Z 750 Turbo
115-K01 115-K02 114-K01 114-K02 - Zephyr 750
115-K01 115-K02 114-K01 114-K02 check the possibility ZR-7 /S
- - - - check the possibility ZX-7R /RR Ninja
115-K01 115-K02 114-K01 114-K02 check the possibility ZXR 750 /R
115-K07 115-K04 114-K07 - - W 800
115-K01 115-K02 114-K01 114-K02 - GPZ 900R
115-K01 115-K02 114-K01 114-K02 - ZX-9R Ninja
115-S10 115-S12 - - check the possibility KLV 1000
115-K07 115-K05 114-K07 114-K05 680LB10+colour Versys 1000
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 1000
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 1000 (ABS)
115-K01 115-K05 114-K01 114-K05 680LB10+colour Z 1000SX /Tourer ABS
115-K01 115-K02 114-K01 114-K02 - ZX-10
115-K06 115-K05 114-K06 114-K05 680LB10+colour ZX-10 R Ninja
115-H01 115-K05 114-H01 114-K05 680LB08+colour ZX-10 R Ninja
115-K01 115-K02 114-K01 114-K02 - GPZ 1100 (ABS)
115-K01 115-K02 114-K01 114-K02 - Zephyr 1100
115-K01 115-K02 114-K01 114-K02 680LB10+colour ZRX 1100
115-K01 115-K02 114-K01 114-K02 - ZZR 1100
115-K01 115-K02 114-K01 114-K02 680LB10+colour ZRX 1200 /R /S
115-K01 115-K05 114-K01 114-K05 - ZZR 1200
115-K06 115-K05 114-K06 114-K05 - 1400 GTR (ABS) (CBS)
115-K06 115-K05 114-K06 114-K05 680LB10+colour ZZR 1400 (ABS)
- - - - 680LB08+colour 690 Duke

- - - - 680LB08+colour 990 SMT
115-S10 - - - 680LB08+colour 990 Super Duke
- - - - 680LB08+colour 1190 RC 8
- - - - - 750 Nevada
- - - - - V11
- - - - - 1200 Sport
- - - - - Corsaro 1200
115-D04 115-D04 114-D04 114-D04 - F4 750

115-D04 115-D04 114-D04 114-D04 - Brutale 750
81
cont
MZ
MZ 1000 S MZ 1000 04- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
MZ 1000 SF /SFs MZ 1000 05- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Suzuki
GS 500 /E /F /H GM51B/BK/WVBK 89- 200-L03+colour 200SL03+colour 200-R17+colour 200SR17+colour
GSF 600 /S Bandit GN77B /WVA8 95-04 200-L03+colour 200SL03+colour 200-R17+colour 200SR17+colour
GSR 600 WVB 9 06- 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX 600F GN72B 88-97 200-L04+colour 200SL04+colour - -
GSX 600F AJ 98- 200-L04+colour 200SL04+colour - -
GSX-R 600 AD 97-00 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 600 WVBG 01-03 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 600 WVB 2 04-05 200-L18+colour 200SL18+colour 200-R18R+colour 200SR18R+colour
GSX-R 600 WVCE /CV /C3 06- 200-L19+colour 200SL19+colour 200-R18R+colour 200SR18R+colour
RF 600R GN76B 93- 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
DL 650 V-Strom (ABS) WVB1 04-09 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
DL 650 V-Strom (ABS) WVB1 10-11 200-L29+colour 200SL29+colour 200-R17+colour 200SR17+colour
DL 650A V-Strom ABS C7 12- 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSF 650 /A /S /SA Bandit (ABS) WVB 5 05-06 - - 200-R17+colour 200SR17+colour
GSF 650 /S Bandit (ABS) WVCJ /CZ 07- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 650 F (ABS) WVCJ 08- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
SFV 650 Gladius (ABS) WVCX 09- 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
SV 650 /S AV 99-02 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
SV 650 /S (ABS) WVBY 03- 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
GSR 750 C5 11- 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX 750 AE 98-01 200-L03+colour 200SL03+colour 200-R17+colour 200SR17+colour
GSX 750 F GR78A /AK /WVAK 89-06 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
GSX-R 750 GR75A 85-87 - - - -
GSX-R 750 GR77B /GR7AB 88-91 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
GSX-R 750W /SP GR7BB 92-95 200-L04+colour 200SL04+colour 200-R17+colour 200SR17+colour
GSX-R 750 GR 7 DB 96-99 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 750 WVBD 00-03 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 750 WVB 3 04-05 200-L18+colour 200SL18+colour 200-R18R+colour 200SR18R+colour
GSX-R 750 WVCF /CW /C4 06- 200-L19+colour 200SL19+colour 200-R18R+colour 200SR18R+colour
RF 900R GT73B 94- 200-L02R+colour 200SL02R+colour 200-R17+colour 200SR17+colour
DL 1000 V-Strom WVBS 02-07 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX-R 1000 WVBL 01-02 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 1000 WVBZ 03-04 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 1000 WVB6 05-06 200-L19+colour 200SL19+colour 200-R18R+colour 200SR18R+colour
GSX-R 1000 WVCL 07-08 200-L22R+colour 200SL22R+colour 200-R18R+colour 200SR18R+colour
GSX-R 1000 WVCY 09- 200-L19+colour 200SL19+colour 200-R18R+colour 200SR18R+colour
SV 1000 /S WVBX 03- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
TL 1000 R AM 98- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
TL 1000 S AG 97- 200-L18+colour 200SL18+colour 200-R17+colour 200SR17+colour
GSX-R 1100 GU74C 86-88 - - - -
GSX-R 1100 /W GV 73 C /75 C 89-96 200-L02R+colour 200SL02R+colour 200-R17+colour 200SR17+colour
GSF 1200 /S Bandit (ABS) GV 75 A 96-00 200-L02R+colour 200SL02R+colour 200-R17+colour 200SR17+colour
GSF 1200 /S Bandit WVA 9 01-05 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSF 1200 /S Bandit (ABS) WVCB 06 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 1200 Inazuma A3 99- 200-L02R+colour 200SL02R+colour 200-R17+colour 200SR17+colour
GSF 1250 /A /S /SA Bandit (ABS) WVCH 07- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 1250FA WVCH 10- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 1300 BK B-King (ABS) WVCR 08- - - 200-R18R+colour 200SR18R+colour
GSX 1300 R Hayabusa WVA 1 99-07 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 1300 R Hayabusa II WVCK 08- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
GSX 1400 WVBN 02- 200-L22+colour 200SL22+colour 200-R17+colour 200SR17+colour
Triumph
Daytona 600 806 LW 04- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Speed Four 806 LB 02- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
TT 600 806 AD 00- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Daytona 650 865 LX 05 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Daytona 675 D67LC 06-10 200-L26+colour 200SL26+colour 200-R18R+colour 200SR18R+colour
Daytona 675 D67LC 11-12 200-L26+colour 200SL26+colour 200-R18R+colour 200SR18R+colour
Daytona 675 R /ABS D67LC /H67 11- 200-L26+colour 200SL26+colour 200-R23R+colour 200SR23R+colour
Street Triple D67LD 08- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Street Triple R D67LD /L67LR 09- 200-L26+colour 200SL26+colour 200-R18R+colour 200SR18R+colour
America 908M 02- 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Bonneville 908 MD 02-06 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Tiger 800 (ABS) A08 11- 200-L26+colour* 200SL26+colour* 200-R17+colour* 200SR17+colour*
America 908MK /908MK2 07- 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Bonneville /T100 986 MF 07- /05- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Scrambler 986MG /2 06- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Speed Master 908ML 03-07 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Speed Master 986ML2 08- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Thruxton 900 986ME /2 05- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Daytona 900 /Super III T300 /B /D 93-96 - - - -
*nicht m. Triumph Zubehör-Handprotektoren/not with Triumph handprotectors
82
tent
115-MZ1 115-MZ2 - - - MZ 1000 S

115-MZ1 115-MZ2 - - - MZ 1000 SF /SFs
115-S04 115-S04 - - - GS 500 /E /F /H

115-S03 115-S02 114-S03 - - GSF 600 /S Bandit
115-H01 115-S14 114-H01 114-S14 680LB08+colour GSR 600
- 115-S05 - - - GSX 600F
115-S05 115-S05 - - - GSX 600F
115-S01 115-S02 - - 680LB08+colour GSX-R 600
115-S07 115-S02 - - 680LB08+colour GSX-R 600
115-S07 115-S08 - - 680LB08+colour GSX-R 600
115-S13 115-S14 114-S13 114-S14 680LB08+colour GSX-R 600
115-S03 115-S01 114-S03 114-S03 - RF 600R
115-S10 115-S04 - - - DL 650 V-Strom (ABS)
115-S10 115-S04 - - - DL 650 V-Strom (ABS)
115-S10 115-S04 - - 680LB08+colour DL 650A V-Strom ABS
115-S13 115-S09 114-S13 - - GSF 650 /A /S /SA Bandit (ABS)
115-S13 115-S14 114-S13 114-S14 - GSF 650 /S Bandit (ABS)
115-S13 115-S14 114-S13 114-S14 - GSX 650 F (ABS)
115-S13 115-S14 114-S13 114-S14 680LB08+colour SFV 650 Gladius (ABS)
115-S01 115-S08 - - 680LB08+colour SV 650 /S
115-S07 115-S08 - - 680LB08+colour SV 650 /S (ABS)
115-S13 115-S14 114-S13 114-S14 680LB08+colour GSR 750
115-S03 115-S02 114-S03 - - GSX 750
115-S05 115-S05 - - - GSX 750 F
115-S05 115-S05 - - - GSX-R 750
115-S01 115-S01 - - - GSX-R 750
115-S01 115-S01 - - - GSX-R 750W /SP
115-S01 115-S02 - - 680LB08+colour GSX-R 750
115-S07 115-S02 - - 680LB08+colour GSX-R 750
115-S07 115-S08 - - 680LB08+colour GSX-R 750
115-S03 115-S03 114-S03 114-S03 - RF 900R
115-S10 115-S12 - - - DL 1000 V-Strom
115-S07 115-S02 - - 680LB08+colour GSX-R 1000
115-S07 115-S08 - - 680LB08+colour GSX-R 1000
115-S07 115-S09 - - 680LB08D+colour SV 1000 /S
115-S01 115-S02 - - - TL 1000 R
115-S01 115-S02 - - - TL 1000 S
115-S05 115-S05 - - - GSX-R 1100
115-S03 115-S03 114-S03 114-S03 - GSX-R 1100 /W
115-S03 115-S03 114-S03 114-S03 - GSF 1200 /S Bandit (ABS)
115-S03 115-S11 114-S03 - - GSF 1200 /S Bandit
115-S13 115-S11 114-S13 - - GSF 1200 /S Bandit (ABS)
115-S01 115-S02 - - GSX 1200 Inazuma
115-S13 115-S14 114-S13 114-S14 680LB08+colour GSF 1250 /A /S /SA Bandit (ABS)
115-S13 115-S14 114-S13 114-S14 680LB08+colour GSX 1250FA
115-S10 115-S14 - 114-S14 680LB08+colour GSX 1300 BK B-King (ABS)
115-S13 115-S02 114-S13 - 680LB08+colour GSX 1300 R Hayabusa
115-S13 115-S14 114-S13 114-S14 680LB08+colour GSX 1300 R Hayabusa II
115-S07 115-S12 - - - GSX 1400
115-T08 115-T06 - - check the possibility Daytona 600

115-T01 115-T06 114-T01 - check the possibility Speed Four
115-T01 115-T06 114-T01 - check the possibility TT 600
115-T08 115-T06 - - check the possibility Daytona 650
115-T13 115-T12 - - 680LB06+colour Daytona 675
115-T13 115-T12 - - 680LB08D+colour Daytona 675
115-T13 115-T12 - - check the possibility Daytona 675 R /ABS
115-T13 115-T12 - - 680LB06+colour Street Triple
115-T13 115-T12 - - 680LB08+colour Street Triple R
115-T14 115-T15 - - - America
115-T14 115-T15 - - - Bonneville
- - - - 680LB08D+colour Tiger 800 (ABS)
115-T14 115-T15 - - - America
115-T14 115-T15 - - - Bonneville /T100
115-T14 115-T15 - - - Scrambler
- - - - - Speed Master
- - - - - Speed Master
115-T09 115-T10 - - - Thruxton 900
115-T01 115-T01 114-T01 114-T01 check the possibility Daytona 900 /Super III
83
cont
Triumph
Speed Triple 900 T300B 94-96 - - - -
Sprint 900 /Executive /Sport T300A 93-98 - - - -
Thunderbird /Sport T309RT /309RT 95-04 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Daytona T595 /955i T595 97-01 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Daytona 955i /Century Edition 595N 02-05 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Speed Triple /T509 T509/595RPT 97-01 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Speed Triple 595N 02-04 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Sprint RS /ST T695 /AC / AB 00-04 200-L07+colour 200SL07+colour 200-R17+colour 200SR17+colour
Tiger T709 /709EN 99-06 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Speed Triple 515 NJ 05-07 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Speed Triple 515 NJ 08-11 200-L26+colour 200SL26+colour 200-R18R+colour 200SR18R+colour
Speed Triple (ABS) 515 NV 11- 200-L26+colour 200SL26+colour 200-R23R+colour 200SR23R+colour
Sprint ST (ABS) 215 NA 05- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Tiger 1050 (ABS) 115 NG 07- 200-L26+colour 200SL26+colour 200-R17+colour 200SR17+colour
Daytona 1200 T300/D 93- - - - -
Tiger Explorer V13VG 12- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
Rocket III /Classic C 23 XB 05- - - 200-R17+colour 200SR17+colour
Voxan
Cafe Racer V2 ´02 - 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Roadster V2 ´02 - 200-L13+colour 200SL13+colour 200-R13+colour 200SR13+colour
Yamaha
YZF-R 125 RE06 08- 200-L29+colour 200SL29+colour - -
XV 535 Virago alle 87- - - - -
FZ 6 Fazer /S (ABS) RJ 07 04-06 200-L20+colour 200SL20+colour 200-R22+colour 200SR22+colour
FZ 6 /Fazer /S2 (ABS) RJ 14 07- 200-L20+colour 200SL20+colour 200-R22+colour 200SR22+colour
FZR 600 Genesis alle 89-93 200-L06+colour 200SL06+colour 200-R10+colour 200SR10+colour
FZR 600 R Genesis 4JH/4MH 94-95 200-L06+colour 200SL06+colour 200-R17+colour 200SR17+colour
FZS 600 Fazer RJ02 98-03 200-L29+colour 200SL29+colour 200-R17+colour 200SR17+colour
SRX 600 alle 86- - - 200-R10+colour 200SR10+colour
XJ 600 N /S /Diversion 4BR /4LX /RJ01 92-03 200-L29+colour 200SL29+colour - -
XJ 6 /Diversion /F (ABS) RJ 19 09- 200-L20+colour 200SL20+colour 200-R22+colour 200SR22+colour
YZF 600R Thundercat 4TV/4WD 96- 200-L06+colour 200SL06+colour 200-R17+colour 200SR17+colour
YZF-R 6 RJ 03 99-02 200-L20+colour 200SL20+colour 200-R17+colour 200SR17+colour
YZF-R 6 RJ05 /09 03-04 200-L20+colour 200SL20+colour 200-R17+colour 200SR17+colour
YZF-R 6 /S RJ095 /11 /15 05- 200-L20+colour 200SL20+colour 200-R35R+colour 200SR35R+colour
XVS 650 Drag Star alle 97- - - - -
MT-03 RM02 06- - - 200-R22+colour 200SR22+colour
SZR 660 4SV 95- 200-L06+colour 200SL06+colour 200-R12+colour 200SR12+colour
FZ 750 /Genesis alle 85- 200-L05+colour 200SL05+colour 200-R10+colour 200SR10+colour
FZX 750 2JE 87- 200-L05+colour 200SL05+colour 200-R10+colour 200SR10+colour
XV 750 Virago /SP 4FY /4PW 92-97 - - - -
YZF 750 R alle 93- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
YZF 750 SP 4HT 93- 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
FZ 8 /Fazer 8 (ABS) RN 25 10- 200-L20+colour 200SL20+colour 200-R22+colour 200SR22+colour
TRX 850 4 UN 96- 200-L06+colour 200SL06+colour 200-R17+colour 200SR17+colour
TDM 900 RN 08 02-03 200-L29+colour 200SL29+colour 200-R17+colour 200SR17+colour
TDM 900 (ABS) RN 11 /RN 18 04-06/07- 200-L29+colour 200SL29+colour 200-R22+colour 200SR22+colour
XJ 900 Diversion 4KM 95-03 200-L29+colour 200SL29+colour - -
FZ 1 /Fazer (ABS) RN16 06- 200-L20+colour 200SL20+colour 200-R22+colour 200SR22+colour
FZR 1000 Genesis 2LA 87-88 200-L05+colour 200SL05+colour 200-R10+colour 200SR10+colour
FZR 1000 Genesis EXUP 3LE 89-91 200-L24+colour 200SL24+colour - -
FZR 1000 Genesis EXUP 3LE 92-95 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
FZS 1000 Fazer RN06 /14 01-05 200-L20+colour 200SL20+colour 200-R17+colour 200SR17+colour
YZF 1000 Thunderace 4VD /4SV 96-01 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
YZF-R 1 RN 01 98 200-L18+colour 200SL18+colour 200-R20+colour 200SR20+colour
YZF-R 1 RN 01 99 200-L20+colour 200SL20+colour 200-R20+colour 200SR20+colour
YZF-R 1 RN 04 00-01 200-L20+colour 200SL20+colour 200-R20+colour 200SR20+colour
YZF-R 1 RN 09 02-03 200-L20+colour 200SL20+colour 200-R17+colour 200SR17+colour
YZF-R 1 /SP RN12 /19 04-08 200-L20+colour 200SL20+colour 200-R35R+colour 200SR35R+colour
YZF-R 1 RN 22 09- 200-L20+colour 200SL20+colour 200-R19R+colour 200SR19R+colour
BT 1100 Bulldog (NSR 1100) RP 05 02-04 200-L29+colour 200SL29+colour 200-R17+colour 200SR17+colour
BT 1100 Bulldog (NSR 1100) RP 05 05-07 200-L29+colour 200SL29+colour 200-R22+colour 200SR22+colour
FJ 1100 47E 85-86 - - 200-R10+colour 200SR10+colour
FJ 1200 ABS alle 87- 200-L05+colour 200SL05+colour - -
FJ 1200 alle 87- 200-L05+colour 200SL05+colour 200-R10+colour 200SR10+colour
VMX 1200 Vmax alle -04 - - 200-R10+colour 200SR10+colour
XJR 1200 /SP 4 PU 96-99 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
XT 1200Z DP01 10- - - 200-R22+colour 200SR22+colour
XJR 1300 RP02 /06 99-03 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
XJR 1300 RP 10 /19 04- 200-L24+colour 200SL24+colour 200-R22+colour 200SR22+colour
FJR 1300 RP 04 01-02 200-L24+colour 200SL24+colour 200-R17+colour 200SR17+colour
FJR 1300 /A /AS RP08 /11 /13 03- 200-L24+colour 200SL24+colour 200-R22+colour 200SR22+colour
MT-01 /S RP12 /18 05- 200-L24+colour 200SL24+colour 200-R35R+colour 200SR35R+colour
Vmax RP 21 09- 200-L24+colour 200SL24+colour - -
84
tent
115-T01 115-T01 114-T01 114-T01 - Speed Triple 900

115-T01 115-T01 114-T01 114-T01 - Sprint 900 /Executive /Sport
115-T15 115-T15 - - - Thunderbird /Sport
115-T05 115-T06 114-T05 - - Daytona T595 /955i
115-T05 115-T06 114-T05 - - Daytona 955i /Century Edition
115-T05 115-T06 114-T05 - - Speed Triple /T509
115-T05 115-T06 114-T05 - - Speed Triple
115-T01 115-T06 114-T01 - - Sprint RS /ST
115-T01 115-T01 114-T01 114-T01 - Tiger
115-T05 115-T11 114-T05 - - Speed Triple
115-T05 115-T11 114-T05 - - Speed Triple
115-T13 115-T12 - - - Speed Triple (ABS)
- - - - - Sprint ST (ABS)
115-T05 115-T11 114-T05 - check the possibility Tiger 1050 (ABS)
115-T01 115-T01 114-T01 114-T01 - Daytona 1200
- - - - check the possibility Tiger Explorer
- - - - - Rocket III /Classic
- - - - - Cafe Racer
- - - - - Roadster
115-Y01 115-Y02 114-Y01 114-Y02 - YZF-R 125

115-Y05 115-Y06 - - - XV 535 Virago
115-Y01 115-Y02 114-Y01 114-Y02 - FZ 6 Fazer /S (ABS)
115-Y01 115-Y09 114-Y01 - - FZ 6 /Fazer /S2 (ABS)
115-Y01 115-Y02 114-Y01 114-Y02 - FZR 600 Genesis
115-Y01 115-Y02 114-Y01 114-Y02 - FZR 600 R Genesis
115-Y01 115-Y02 114-Y01 114-Y02 - FZS 600 Fazer
115-Y01 115-Y02 114-Y01 114-Y02 - SRX 600
115-Y01 115-Y02 114-Y01 114-Y02 - XJ 600 N /S /Diversion
115-Y01 115-Y02 114-Y01 114-Y02 - XJ 6 /Diversion /F (ABS)
115-Y01 115-Y02 114-Y01 114-Y02 - YZF 600R Thundercat
115-Y01 115-Y02 114-Y01 114-Y02 680LB06+colour YZF-R 6
115-Y11 115-Y10 - - 680LB06+colour YZF-R 6
115-Y11 115-Y10 - - 680LB06+colour YZF-R 6 /S
115-Y05 - - - - XVS 650 Drag Star
115-Y01 115-Y02 114-Y01 114-Y02 - MT-03
115-Y01 115-Y02 114-Y01 114-Y02 - SZR 660
115-Y01 115-Y02 114-Y01 114-Y02 - FZ 750 /Genesis
115-Y01 - 114-Y01 - - FZX 750
115-Y05 115-Y06 - - - XV 750 Virago /SP
115-Y01 115-Y02 114-Y01 114-Y02 - YZF 750 R
115-Y01 - 114-Y01 - - YZF 750 SP
115-Y01 115-Y02 114-Y01 114-Y02 680LB06+colour FZ 8 /Fazer 8 (ABS)
115-Y01 115-Y02 114-Y01 114-Y02 680LB10+colour TRX 850
115-Y01 115-Y09 114-Y01 - - TDM 900
115-Y01 115-Y09 114-Y01 - - TDM 900 (ABS)
115-Y01 115-Y02 114-Y01 114-Y02 - XJ 900 Diversion
115-Y01 115-Y02 114-Y01 114-Y02 680LB06+colour FZ 1 /Fazer (ABS)
115-Y01 115-Y02 114-Y01 114-Y02 - FZR 1000 Genesis
115-Y01 115-Y02 114-Y01 114-Y02 - FZR 1000 Genesis EXUP
115-Y01 115-Y02 114-Y01 114-Y02 - FZR 1000 Genesis EXUP
115-Y01 115-Y09 114-Y01 - - FZS 1000 Fazer
115-Y01 115-Y02 114-Y01 114-Y02 - YZF 1000 Thunderace
115-Y07 115-Y08 - - 680LB06+colour YZF-R 1
115-Y07 115-Y10 - - 680LB06+colour YZF-R 1
115-Y11 115-Y10 - - 680LB06+colour YZF-R 1 /SP
115-Y11 115-Y10 - - 680LB06+colour YZF-R 1
115-Y01 115-Y09 114-Y01 - - BT 1100 Bulldog (NSR 1100)
115-Y01 115-Y09 114-Y01 - - BT 1100 Bulldog (NSR 1100)
- - - - - FJ 1100
- - - - - FJ 1200 mit ABS
- - - - - FJ 1200 ohne ABS
115-Y05 115-Y06 - - - VMX 1200 Vmax
115-Y01 115-Y02 114-Y01 114-Y02 - XJR 1200 /SP
- 115-Y02 - 114-Y02 - XT 1200Z
115-Y01 115-Y02 114-Y01 114-Y02 - XJR 1300
115-Y01 115-Y02 114-Y01 114-Y02 - XJR 1300
115-Y01 115-Y09 114-Y01 - - FJR 1300
115-Y01 115-Y09 114-Y01 - - FJR 1300 /A /AS
115-Y01 - 114-Y01 - - MT-01 /S
115-Y01 115-Y10 114-Y01 - - Vmax
85
cont
»Urban-Light
86
tent
Kit with machined aluminium brackets
» Urban Headlight Kit

LSL provides universal headlight kits
for slim naked optics. The mount is
machined from solid aluminium; the
holding clamps are available in various
fork diameters for standard Naked bikes.
The fork width may need to be offset
by appropriate sleeves. The distance
between the slidertube clamps is
115mm. When planning, please note
that the spotlight is placed very close
to the fork for optical reasons. A conflict
with the original instruments/brackets and
the ignition switch may occur, depending on
the bike.
Triumph Headlight Kit

The characteristic look of the Speed Triple models –
the twin headlights – are crucial for the Streetfighter
scene, but not to everyone‘s taste because of this. If
you want to get away from this look, or just simply
mount stub handlebars, there is no alternative to new
headlight optics.
LSL provides two conversion options: conventional round
headlights or the modern urban headlight kit. Conversion
kits are available for all three-cylinder Triumph Naked
bikes.
For the Triple from 2002 a milled holder has always been
included for the instruments. As a replacement for for-
cibly omtted air intake on the Street Triple (as standard
The brackets for the Urban Light are available in silver or in the lamp holder), a new intake aperture is used in
black. They are finished with a noble surface. the intake tract.
87
cont
» Headlights and Accessories
Headlight Scrambler, 145mm clear glass, H4, ring black matt or Headlight Clubman, 6.5“
chromed clear lens prism, housing black matt or chromed
The Flat Track fork cover is equipped with a 145 mm H4 headlight Headlight Eighties, 6.5“
and parking light. The fastening is achieved with cable ties on the clear lens prism, housing black matt, ring black matt or chromed
stanchions as with the Enduro Sport.
For sports use, the front plate is available as a closed GRP shell.
» Headlights
Description Colour Width Item No. Description Colour Width Item No.
Scheinwerfer/headlights Scheinwerfer/headlights
Urban black 180mm 730Y105 Eighties black/chrome 195mm 730K009
Six Days black/chrome 160mm 730SD02SC Eighties black/black 195mm 730K009SW
Six Days black/black 160mm 730SD02SW Clubman black 180mm 730KL02SW
Flat Track Light white 205mm 515TR01 Clubman chrome 180mm 730KL02
Flat Track Shield white 205mm 513FT01
» Specific headlight kits

Model Type Year Urban Kit classic Kit Control Panel
Husqvarna
Nuda 900 A7 12- - 143HU02 727-HU2SW
Triumph
Street Triple 675/ R D67LD 07- 405T041 143T041 727T041SW
Street Triple R L67LR 13- 405T053 143T053 -
Speed Triple 509 T509 08- 405-045 143LT45 -
Speed Triple 955i 595N 02-04 405T027 143T027 727-T27SW
Speed Triple 1050 515N 05-11 405T042 143T042 727-T42SW
Speed Triple 1050 515NV 11- 405T046 143T046 727-T46SW
88
tent
» LSL headlight brackets

and clamps are made from high quality anodised billet aluminium. The offset
17
between bracket and clamp allows an adjustment in width of up to 20mm.
Therefore the kit can be used for different size head lamps and forks.
74mm
17
82mm
97mm
» Universal bracket kit

left: short bracket with indicator hole
right: long bracket without indicator hole
Size Urban Kit incl. headlight conventional without headlight, conventional without headlight, conventional without
120mm, w/o indicator mount 120mm, with indicator Mount headlight, 105mm, with
EUR/pair EUR/pair indicator Mount EUR/pair
Gabeldurchmesser bezogene Lampenkits/headlight kits relating to fork diameter

35mm 405-035 143LT35 143LT35B 143LT35K
36mm 405-036 143LT36 143LT36B 143LT36K
38mm 405-038 143LT38 143LT38B 143LT38K
39mm 405-039 143LT39 143LT39B 143LT39K
40mm 405-040 143LT40 143LT40B 143LT40K
41mm 405-041 143LT41 143LT41B 143LT41K
43mm 405-043 143LT43 143LT43B 143LT43K
45mm 405-045 143LT45 143LT45B 143LT45K
50mm 405-050 143LT50 143LT50B 143LT50K
50/52mm 405-050/52 143LT50/52 143LT50/52B 143LT50/52K
50/53mm 405-050/53 143LT50/53 143LT50/53B 143LT50/53K
50/54mm 405-050/54 143LT50/54 143LT50/54B 143LT50/54K
50/55mm 405-050/55 143LT50/55 143LT50/55B 143LT50/55K
51mm 405-051 143LT51 143LT51B 143LT51K
51/53mm 405-051/53 143LT51/53 143LT51/53B 143LT51/53K
51/54mm 405-051/54 143LT51/54 143LT51/54B 143LT51/54K
52mm 405-052 143-LT52 143LT52B 143LT52K
52/55mm 405-052/55 143LT52/55 143LT52/55B 143LT52/55K
53mm 405-053 143LT53 143LT53B 143LT53K
53/54mm 405-053/54 143LT53/54 143LT53/54B 143LT53/54K
53/55mm 405-053/55 143LT53/55 143LT53/55B 143LT53/55K
54mm 405-054 143LT54 143LT54B 143LT54K
54/55mm 405-053/55 143LT54/55 143LT54/55B 143LT54/55K
55mm 405-055 143LT55 143LT55B 143LT55K
59mm 405-059 143LT59 143LT59B 143LT59K
» Clamps, brackets
Measuring Item No.
Halteschellen Set/clamp set

35mm 143HT35
36mm 143HT36
38mm 143HT38
39mm 143HT39
41mm 143HT41
43mm 143HT43
The brackets are available as short The clamps will be delivered as a set 45mm 143HT45
50mm 143HT50
and long version. The long version is including 4 pieces. Please declare 50/52mm 143HT50/52
available with or without holes for the size you need. All sizes in table 50/54mm 143HT50/54
the indicators. „clamp set“ are combinable. 50/55mm 143HT50/55
51mm 143HT51
Measuring Item No. 51/53mm 143HT51/53
52mm 143HT52
Haltestreben / brackets 53mm 143HT53
97mm 143-ST1SW 53/55mm 143HT53/55
97mm indicator mount 143-ST2SW 54mm 143HT54
82mm indicator mount 143-ST3SW 55mm 143HT55
89
cont
» Plate Hangers
Aluminium number
plate hanger
are also available for a num-
ber of naked bikes and sport
bikes. Please check the mo-
del table on our web site
460K138
www.lsl.eu.
The number plate bracket is made from 2mm aluminium
and is extremely rigid because of its double folded de-
sign. A rubber plug is used to support the number plate
on its bottom side. Number plate bracket and accesso-
ries can be ordered separately. A universal number plate
bracket can be ordered for an individual fitting to other
bike models.
Depending on the original components of the bike the
Triple tail conversion
plate hanger bracket comes with number plate illu-
mination or complete LED tail light. There are moun- As a substitute for the protruding fender and license
ting holes for aftermarket indicators (10mm). Indicator plate bracket, LSL provides a short and sweet aluminium
stem extensions might be needed, depending on size of variant. The conversion kit for the Triumph Triple includes
number plate. a new rear frame cover in black coloured plastic, milled
holder and the number plate holder with LED backlight.
For Bonneville and Thruxton
models LSL delivers an inner
fender as splash guard
460T041
Model Year Item No.

Heckumbau/tail modification
Triumph Bonneville/Thruxton alle/all 460T031
Triumph Street Triple alle/all 460T041
Triumph Speed Triple 1050 05-07 460T033
Triumph Speed Triple 1050 08-10 460T042
Triumph Speed Triple 1050 11- 460T046
Kennzeichenhalter/number plate hanger
460B040 BMW* S1000RR 10- 460B040
*Halter f. BMW-Blinker/bracket f. BMW indicators 460B040BK
Honda CB 1000R 08- 460H127
Kawasaki ZX6R 09- 460K131
Kawasaki Z1000 07-09 460K126
Kawasaki Z1000 10- 460K135
Kawasaki Z1000SX alle 460K138
KTM 690 Duke 08- 460KT11
Suzuki GSX R 1000 09- 460S123
Suzuki GSX-R 600/750 11- 460S127
Triumph Street Triple 13- 460T053
Yamaha FZ8/Fazer 8 alle/all 460Y106
460-UNI/B 460-UNI Yamaha FZ1/Fazer alle/all 460Y106
Yamaha YZF R6 06-10 460Y118
Yamaha YZF R1 09-11 460Y120
Plate holders and accessories are also available Universal- & Einzelteile/universal & components
separately. Thereby it is also possible to mount the Kennzeichenh. m. Kennz.-Bel./plat hanger w. light 460-UNI
license plate holder by your own solution on other Kennzeichenh. m. LED-Rücklicht/hanger w. back light 460-UNI/B
Rückstrahler verstellbar/reflector adjustable 460RS01
motorcycle models. Rückstrahler starr/reflector fixed 460RS02
90
tent
motogaget m-Blaze CONE –

a handlebar end indicator in a radical new design. With
the new, patent-pending TranzLight technology, the
transparent body of the indicator itself becomes lumine-
scent medium. This progressive approach to development
D-Light LED indicator
fashions the light directly over a crystal-like glass body.
Well designed aluminium housing, noble finished sur- The m-Blaze CONE handlebar indicator has been tested
face, resistand against vibrations, ECE-certirfied. and approved according to ECE as a front indicator.
Aluminium indicator extension LED Mini indicator, ECE-certified

to mount accessory indicators, thread M10x1.25. Front & rear mount possible, 2 measurings aveilable
LED Mini Lucas-Style Clubman

Extrem small LED back light with LED back light, strong LED lenses, Classical mini back light with LED.
itegrated number plate lighting. no number plate lighting. The Bracket is made of machined
aluminium, red glass.
Model Measuring Position Item No. Number
Blinker/direction indicator
m-Blaze CONE head: Ø 35mm, length: 43mm left 720MGBLL Stück/piece
m-Blaze CONE head: Ø 35mm, length: 43mm right 720MGBLR Stück/piece
D-Light, black, smoked glas head: 52 x 18mm, length: 69mm left & right 720DL01SW Paar/pair
D-Light, satin silver, smoked glas head: 52 x 18mm, length: 69mm left & right 720DL01SI Paar/pair
LED Mini short head: 46 x 28mm, length: 67mm left & right 720L01SH Stück/piece
LED Mini long head: 46 x 28mm, length: 85mm left & right 720L01LO Stück/piece
Rücklicht/back light
LED Mini, white glas 105 x 28mm - 731-DE1.2 Stück/piece
LED Mini, red glas 105 x 28mm - 731-DE1RT Stück/piece
New Lucas-Style 110 x 30mm - 731LD01RT Stück/piece
Clubman LED 70 x 45mm - 731CL01SW Stück/piece
Zubehör/components
Verlängerung/lengthening M10 x 1.25, 70mm left & right 720LS70 Paar/pair
Verlängerung/lengthening M10 x 1.25, 40mm left & right 720LS40 Paar/pair
Verlängerung/lengthening M8 x 1.25, 70mm left & right 720LS70/M8 Paar/pair
Clubman LED: Blinkerstangen/indicator bracked 60mm, verzahnt/geared left & right 720CS01 Paar/pair
91
cont
» Clubman
Aesthetics is not a question of taste, but balance. Each one of us is fully devoted to
the task and takes great pride in
The latter comes from a technically sensible and the quality of his work. This and
functional design. an efficient quality management
system enable us to offer our in-
dividual designs to be street-legal.
Since its beginnings, LSL has stud- cal features for an excellent driv-
ied the design of chassis compo- ing and braking performance –
nents. We develop our own geom- hence building worthy successors
etry concepts, and test, test, test to an honorable generation of mo-
– and in the end the results speak torcycles like Cafe Racers and Co.
for themselves: excellent chassis
As a matter of principle, we do not
data.
manufacture in series, only on de-
In our very own motorcycle man- mand. Because only the individual
ufactory, the LSL team turns good combination of components such
base motorcycles into true, pas- as suspension, handlebars, and
sionately hand-crafted Clubman seat will give a Clubman its true
®
Clubman® is a registered
models, combining harmonious, character. trademark of LSL Motorcycle
GmbH. It has been trade-
classic shapes with subtle techni- marked in Europe and the US
for several years.
Visit our website at
www.clubman.de
92
tent
Jochen Schmitz-Linkweiler,
executive director of LSL:
”For our Clubman brand, we claim
to develop a pure design and equip
it with high-quality components
to achieve the riding dynamics of
current sport bikes in addition to
an exciting appearance.“
93
cont
» Motorcycle Steering
LSL triple trees

Since founding the company LSL works on the construc- ! The triple tree kit comes without a bearing
stud which has to be removed from the old
tion of chassis components. Just in the beginning when one and pressed into the new one. LSL offers
designing the first Super Moto style wheel conversion or this service for free in our shop.
the first Sportster in Clubman style, always the careful
view on the geometry of the motorcycle was in the focus
of the development.
Today we are able to work easier and more precise.
Basis for this ability is the measuring tool, developed in
house by our engineers, which enables us to record the
real steering angle, trail and wheelbase of a motorcycle.
94
tent
W 650/800
With lifted chassis (by longer shocks) the so conver-

ted bikes get real sports competition.
LSL triple tree kits by shorter offset offer a more pre-
cise steering and better high speed stability. From high
tensile aluminium CNC-machined LSL yokes are stiffer
but also lighter than standard.
For the mounting of strong Upside-Down forks LSL has
the triple trees with clamping 50/54mm.
The top-yokes are prepared for the use of clip-on bars.
For mounting handlebar clamps for straight bars the
yoke are pre drilled (you only have to drill through)
Clamps are available for 7/8”, 1” and 1 1/8” bars.
Bonneville/Thruxton
Significant influence on data of the steering geome-

try have the offset of the triple tree, the length of
fork and shocks and the diameter of the wheels. We
do not want to bother you with more technical de-
tails, only so much that LSL with knowledge of all
these details is able to design certain triple tree kits
to put a motorcycle into modern steering geometry.
contact 95
cont
» Triple tree kits and mounting parts

Together with the conversion of the triple tree the
change of standard headlamp brackets is obligatory.
LSL for that offers a wide program with brackets (see p.
88). Matching bar clamps for the mounting of straight
bars you find below in the table.
!
Model Type Year Product Item No. EUR
Harley Davidson Originalgabel/original fork

Sportster XL 883/1200 XL2 -03 Triple Tree Kit, original fork 39mm 140HD01C 549,00
Kawasaki Originalgabel/original fork
W 650 EJ650A -00 Triple Tree Kit, original fork 39mm 140K086 579,00
W 650 EJ650A 00-06 Triple Tree Kit, original fork 39mm 140K125 579,00
W 800 EJ800A 10- Triple Tree Kit, original fork 39mm 140K137 579,00
W 650/800 all Brembo CNC 4-Piston + 310mm Galfer Wave-Disc 240K086 998,00
Kawasaki 43mm Austauschgabel/43mm exchange fork
W 650 EJ650A all Triple Tree Kit, Fork legs 43mm 140K08643 499,00
W 800 EJ800A 10- Triple Tree Kit, Fork legs 43mm 140K13743 499,00
Yamaha R6 fork, 43mm/W 800 wheel all Brembo CNC 4-Piston + 310mm Galfer Wave-Disc 240Y089/31R 998,00
Z 1000 J/R all 81- Triple Tree Kit for fork 43mm 140K007SW 599,00
Kawasaki Federbeine für Gabelbrücken Kits/twin shocks for triple tree kits
W 650/800 all Twin shocks YSS RZ 362, 330mm 645K086 479,00
Z 1000 J/R all 81- Twin shocks Öhlins S 36PR1C1L, 365mm 644K082R 1390,00
Triumph Originalgabel/original fork
Bonneville/Thruxton/Scrambler 908MD/ME/MG -10 Triple Tree Kit, original fork 41mm 140T031 549,00
Bonneville Gussrad 986MF alle Triple Tree Kit, original fork 41mm not available -
Bonneville/Thruxton 908MD/ME 11- Triple Tree Kit, original fork 41mm 140T050 549,00
Thruxton 908ME all Alu-Fender for 17“ wheel 506T03117 169,95
Thruxton 908ME all 320mm Galfer Wave-Disc 239T031 259,00
Bonneville/Scrambler 908MD all Brembo CNC 4-Piston + 320mm Galfer Wave-Disc 240T024 998,00
Thruxton 908ME all Brembo CNC 4-Piston + 320mm Galfer Wave-Disc 240T031 998,00
Triumph 43mm Austauschgabel/43mm exchange fork
Bonneville/Thruxton/Scrambler 908MD/ME/MG all Triple Tree Kit for fork 43mm 140T03143SW 499,00
Fork Yamaha 43mm/320mm disc - all Brembo CNC 4-Piston + 320mm Galfer Wave-Disc 240Y089/32L 998,00
Triumph Bonneville/Thruxton Upside Down Austauschgabel/upside down exchange fork
Bonneville/Thruxton 986MD/ME 11- Triple Tree Kit for USD-fork, 50/54mm 140T050OHSW 799,00
*Radbuchsen für Serien-Nabe enthalten /bushing for standard hub included
Triple Tree Kit for USD-fork, 50/54mm* Öhlins FG 341, 50/54mm 140FOH341 2750,00
*alternative Gabel /alternativ fork Kawasaki ZX-10R 2008
USD-Fork Öhlins FG 341/LSL Triple Tree Kit Alu-Fender for 17" wheel 506OH341 339,00
USD-Fork Öhlins FG 341/KINEO Wheel Wheel axle and bushing set for KINEO wheel 141SKT50 149,95
USD-Fork Öhlins FG 341/310mm disc Brembo 4-piston radial caliper (108mm/22,5mm) 240BS127L 389,00
USD-Fork Öhlins FG 341/320mm disc Caliper fitting kit for 320mm disc (Galfer Wave-Disc) 241OH341+32 29,95
Triumph Scrambler Upside Down Austauschgabel/upside down exchange fork
Scrambler 986MG -10 Triple Tree Kit for USD-fork, 50/54mm 140T038OHSW 799,00
Scrambler* 986MG 11- Triple Tree Kit for USD-fork, 50/54mm 140T051OHSW 799,00
*Radbuchsen für Serien-Nabe enthalten/bushing for standard hub included
Triple Tree Kit for USD-fork, 50/54mm Öhlins FG 324, 50/54mm with caliper mounting 140FOH324RL 2699,00
USD-Fork Öhlins FG 324/LSL Triple Tree Kit Front-Fender for 19" wheel 506OHFEX 339,00
USD-Fork Öhlins FG 324/310mm disc Brembo 4-piston radial caliper (100mm/30mm) 240BRG4L 389,00
USD-Fork Öhlins FG 324/320mm disc Caliper fitting kit for 320mm disc 241OHU+32 29,95
Scrambler 986MG -10 Aluminium rim kit 2.50x19/3.50x18 601T038SW 789,00
Scrambler 986MG 11- Aluminium rim kit 2.50x19/3.50x18 601T051SW 789,00
Triumph Federbeine für Gabelbrücken Kits/twin shocks for triple tree kits
Bonneville/Thruxton/Scrambler 908MD/ME/MG all Twin shocks Öhlins Shocks S 36P, 380mm 644T031 795,00
Bonneville/Thruxton 986MD/ME 11- Twin shocks Öhlins S36PR1C1L, Länge 370mm 644T031R 1460,00
Scrambler 908MG all Twin shocks Öhlins Shocks TTX 36, 387mm 644T038R 1890,00
Zündschloss Verlegungskit/iginition delocation kit
Bonneville*/Thruxton*/Scrambler 908MD/ME/MG all 728T024R 32,95
*zur Montage der LSL-Lampenhalter notwendig, s. S. 104/required to mount LSL accessory head lamp brackets, s. p. 104
Handlebar clamps for LSL triple tree kits Description Item No. EUR
handlebar clamps
Standard 22,2mm Riser clamps for standard handlebar 140+KL22 79,95
Zoll 25,4mm Riser clamps for 1 inch-handlebar 140+KL25 79,95
X-Bar 28,6mm Riser clamps for X-Bar handlebar 140+KL28 79,95
96
tent
Clubman rim kits Type Dimension Surface Item No. EUR
For the distinctive wheel sizes of Clubman models Kawasaki

W 650/800 2.50x18/4.25x18 polished 601K0862 749,00
LSL offers the necessary rim kits in modern dimensi-
W 650/800 2.50x18/4.25x18 black 601K0862SW 809,00
ons. The rims come with new spoke kits in stainless W 650/800 2.50x19/3.00x17 black 601K0863SW 789,00
steel when necessary. For use of these wheel sizes al- Triumph Bonneville/Thruxton/Scrambler
ways the conversion with LSL triple trees is required. -2010 3.50x17/5.00x17 black 601T03117SW 929,00
2011- 3.50x17/5.00x17 black 601T05017SW 929,00
The rim kit with 19”/18” for Scrambler you find in the -2010 2.50x18/4.25x18 polished 601T03117 869,00
triple tree table left. -2010 2.50x18/4.25x18 black 601T03117SW 929,00
2011- 2.50x18/4.25x18 polished 601T03117 869,00
2011- 2.50x18/4.25x18 black 601T03117SW 929,00
Spoked wheels for tubeless tyres

A light spoke wheel for mounting tubeless tyres was The double swaged 5/4mm spokes are produced in high-
for years the wish of many customizer. Now the KINEO resistance stainless steel. The 28 front and 32 rear spo-
wheels satisfy this desire. kes are perfectly rectilinear. The spokes are turned on
the hub with a normal hexagonal wrench. Eventual re-
The rim is produced from a blank built using a new pro-
placements may be made without disassembling the bike
cess permitting the use of 7000 aluminium alloy. The
tire and wheel.
final phase includes CNC machining. Aluminium valve
supplied. Nipples geometry is the greatest innovation of KINEO
wheels. These elements are fixed on the rim in a pa-
The hub is obtained from a forged 7000 aluminium alloy
rallel position with respect to the wheel axis and
and finished by CNC machining.
require no holes on the rim. Standard colours: Hub
black, rim black, nipples titanium. Other colours are
available on request.
Model rear Item No. EUR
Husqvarna
Nuda 900 /R 5.50 x 17 605HU02 2490,00
Triumph
Bonneville 5.00 x 17 605T024 2490,00
Thruxton 5.00 x 17 605T024 2490,00
Street Triple 5.50 x 17 605T041 2490,00
Tiger 800 5.50 x 17 605T047 2490,00
Speed Triple 6.00 x 17 605T046 2745,00
front: 4,4kg incl. Adapter and brake discs

rear: 6,9kg incl. Adapter
contact 97
cont
» Clubman Parts
Model Position Rad Item No.
Honda
CB 1100 vorn/front 18“ 506H141A
CB 1100 hinten/rear 507H141A
Kawasaki
W 650/800 vorn/front 18“ 506K086A18
W 650/800 vorn/front 19“ 506K086A19
W 650/800 hinten/rear 507K086A
Moto Guzzi
V7 vorn/front 17“ 506M018A
V7 hinten/rear 507M018A
Triumph
Bonneville Grussrad/cast wheel vorn/front 17“ 506T044A
Thruxton vorn/front 18“ 506T031A
Bonneville T100 (screwed fender) vorn/front 19“ 506T038A
Scrambler vorn/front 19“ 506T038A
Bonneville/Scrambler/Thruxton hinten/rear 507T024A
universelle Alu-Fender/universal alu-fender
L500mm/B105mm vorn/front 17“ 506A05017
L500mm/B105mm
L600mm/B105mm
vorn/front
vorn/front
18“
18“
506A05018
506A06018
Aluminium fender
L600mm/B105mm vorn/front 19“ 506A06019 High polished aluminium fenders, model specific with
L800mm/B105mm vorn/front 19“ 506A08019
L600/B145mm, radius 400mm hinten/rear 507A060 brackets for fitting at the standard fitting mountings.
L1000/B145mm, radius 400mm hinten/rear 507A100
98
tent
Aluminium Chain Guard Triumph Extreme Parts

Mounting as original at the swinging arm; available Very strong out of 7075 alloy CNC-machined foot pegs
in aluminium-silver or black anodised. with a gruffly cogging and hard-anodised surface. Non
folding lock supports the bike when falling.
For Speed Triple models with extra carbon-fibre guide
rail for the brake hose. The skid wise machined brake cylinder guard protects
the sensible push rod system against damage.
Model Year Colour Item No. Model Colour Item No.
Honda Extreme Parts

CB 1100 alle/all black 713H141SW Rasten black 115T038FEX
CB 1100 alle/all silver 713H141SI brake pump protection rear black 715T038SW
Husqvarna brake pump protection rear silver 715T038SI
Nuda 900 /R 12- silver 713HU02SI
Kawasaki
W 650/800 alle/all black 713K086SW
W 650/800 alle/all silver 713K086SI
Triumph
Scrambler black 713T024SW
Scrambler silver 713T024SI
Bonneville/Thruxton black 713T024SW
Bonneville/Thruxton silver 713T024SI
Tiger 800 black 713T047SW
Tiger 800 silver 713T047SI
Speed Triple 97-04 black 713T014SW
Pinion Cover
Speed Triple 97-04 silver 713T014SI
Speed Triple 1050 05-10 black 713T033SW
The CNC-machined LSL sprocket cover replaces the
Speed Triple 1050 05-10 silver 713T033SI simple original plastic.
Injection cover
This part protects the injection system against side-
wise hits. It‘s made of massive machined aluminium.
Model Type Year Item No.
Triumph
Street Triple 675 D67LD 07- 712T041
Bonneville/Thruxton MD/ME alle/all 712T024
Speed Triple 1050 515NJ 05-07 712T033
Speed Triple 1050 515NJ 08-11 712T046
Model Type Year Item No. Speed Triple 1050 515NV 11- 712T046
Injection-Cover
Injection-Cover W 800 alle 438K137
99
cont
Lindy Bob
Lindy Bob
W 650/800 alle/all 502K137LB
Clubman Seats
Strong, slip resistant seat cover in the area of the riders place. Produced by German craftsmanship.
Flat Track Clubman

Slim and short seat unit for W 800 Flat Track bikes. Slim and short seat unit; passenger area lifted for
cafe racer look.
Flat Track Clubman
W 650/800 alle/all 502K086FT Bonneville/Thruxton alle/all 502T031
Knurled head screws

to fix side covers or tool boxes etc. Extra long version
to mount the seats of Bonneville and Thruxton.
Rändelkopfschraube/knurled head screws

M6x20, Rändelkopfhöhe 24mm 317T024B
M6x20, Rändelkopfhöhe 32mm 317T024
M6x20, Rändelkopfhöhe 90mm 317T024/90
100
tent
Tail conversion Extreme/Lindy Bob

Short and stylish rear fender/seat unit to fit Kawasaki
W 650/800 and Triumph Twin models. Produced out
of unpainted GRP, the fender comes together with tail
light Neo-Lucas.
Type Item No.
Extreme Sitzbank/seat
Bonneville/Thruxton/Scrambler 502T038EX
Extreme Parts Bonneville/Scrambler
GfK-frontfender uncoated 506T038G
GfK-rear fender, incl. Neo LED-light uncoated 507T038EX
Lindy Bob Fender
W 650/800 front 19“ uncoated 506K086G19
W 650/800 rear uncoated 507K137LB
101
cont
» Clubman Parts
VELONA instruments
The new Japan made VELONA instruments combine an appealing optic with a high functionality at a reasonable
price. The housing is made out of stainless steel and comes mat black painted. The allusively enlightened indicator
is moved by a high-grade electric pecking motor.
The speedometer offers display of mileage, trip counter, timer and on-board voltage. The digital signal for
operating the speedo has either to been taken from original sensor or by optional available accessory sensors
out of LSL program. So even ready to mount adapters for original speedo gearings are available.
The tachometer offers the record of maximum rev-counting and hours of operating. Rev counting signal is
t aken directly from ignition electronic.
With the instruments a universal mounting bracket is always included. Fork size related brackets are available
for 39, 41 and 43mm stanchion diameter.
!
Product Colour Item No. Product Item No.
Instrument/meter Zubehör/accessoiries
Tachometer/speed indicator 200 km/h black 725DV01SW speedo sensor M8x30 inclusive plug 723TS01
Drehzahlmesser/rev counter 8000 rpm black 726DV01SW speedo universal hall transmitter M8x30 723-TS1
Befestigung/attachment speedo universal sensor, with LSL plug 725TS01
Halteschelle/attachment clamp Ø39mm black 723M039SW speedo universal hall transmitter without plug 725-TS1
Halteschelle/attachment clamp Ø41mm black 723M041SW speedo sensor ø10/M5, (div. Honda/Triumph w/o CAN-Bus) 725-TS2
Halteschelle/attachment clamp Ø43mm black 723M043SW speedo sensor M11, Gabel/slot (div. Kawasaki) 725-TS5
Halter/braket to mount with clamps black 725HV01SW speedo sensor M12, Gabel/slot (div. Kawasaki) 725-TS3
bracket for Bonnie/Thruxton/Scrambler black 725TV24SW speedo sensor M12, Vierkant/square (div. Yamaha) 725-TS4
Adapter W800 Classic 725AK137
Polished Aluminium-Covers are available for Bonneville and Thruxton

Speedometer and Tachometer instruments. For models since 2011 with
electronic drive the cover is mounted on top of standard plastic cups.
analoger Tacho/analog speed indicator

Bonneville -09 speedo only poliert 727T024
Thruxton -09 speedo & rev counter poliert 727T031
elektronischer Tacho/electronic speed indicator
Bonneville for example speedo only poliert 727T056
Thruxton, Bonnie -SE for example speedo & rev counter poliert 727T050
102
tent
motoscope classic
The motoscope classic is a multi functional instrument in a classical round housing.
The white display with red indicator records either speed or tachometer data.
All further values are shown in the digital display.
Modern digital technique, high grade materials, hand made production and intensive
quality checks guarantee highest optical and functional quality – Made in Germany.
!
Product Colour Item No.
Instrument/meter
motoscope classic Tachometer/speed indicator, 200 km/h black 723MSCLSPSW
motoscope tiny Tachometer/speed indicator, 200 km/h black 723MSTISPSW
motoscope classic Drehzahlmesser/rev counter, 8.000/min black 723MSCLDZ8SW
motoscope classic Drehzahlmesser/rev counter, 10.000/min black 723MSCLDZSW
Befestigung/attachment
Halteschelle/attachment clamp 39mm black 723M039SW
Halteplatte/bracket classic to mount with clamps black 723MSC01SW
Halteplatte/bracket tiny to mount with clamps black 723MST01SW
Halteplatte/bracket classic Bonnie/Thruxton/Scrambler black 723TC24SW
Halteplatte/bracket classic Bonnie/Thruxton/Scrambler silver 723TC24SI
Halteplatte/bracket tiny Bonnie/Thruxton/Scrambler black 723TT24SW
Zubehör/accessories
Motosign Mini, control panel black 723MSIGNSW
LED Kontrollleuchteneinheit/unit black 725LED01SW
Dashboard Motogadget black 723MDB1SW
Dashboard Motogadget silver 723MDB1SI
Push button compact, M12/waterproof black 723-IT2
Push button Kit M12 black 723MT1SW
Adapter W800 Classic 723AK137
103
cont
» Clubman Parts
REMUS exhaust system

Exclusively for LSL the company REMUS produ-
ces an exhaust system with EU homologation. For
Bonneville and Thruxton models mufflers are available.
Because of the single walled construction typical ther-
mic colour changings (blue/brown) are possible.
Model Colour Item No.
Kawasaki Auspuffanlage/exhaust system

W 650 chrom 415K086
W 650 schwarz 415K086SW
W 800 schwarz 415K137SW
W 800 perl-gestrahlt 415K137VA
Triumph Auspuffendtöpfe/silencer
Bonneville chrom 415T024
Thruxton chrom 415T031
Galfer brake discs Ignition lock bracket

The wave brake disc offers a simple and easy to mount for Triumph Bonneville and Thruxton.
improvement for the brake system.
Model Size Item No. Model Colour Item No.
Galfer Wave-Bremsscheibe/Brake Disc Zündschlossträger/ignition lock kit

W650/800 300mm 239K086 Bonneville/Thruxton silver 728T024R
Thruxton 320mm 239T031 Bonneville/Thruxton black 728T024RSW
Fork gaiters Bracket kit rectifier/horn

for Triumph Bonneville and Thruxton. for Triumph twins.
Model Item No. Model Item No.
Faltenbälge/fork gaiters Halter Regler & Hupe/bracket rectifier & horn

Bonneville/Thruxton 148T024 Triumph Twins 728TR50
104
tent
LSL offers a special

website for classic bikes
in style of a cafe racer
visit us on:
www.clubman.de
You will find a lot of scene
information.There are listed a lot of
products to build your own stylish
cafe racer.
Bottle Opener LSL-Baseballcap

Aluminium, anodised black, embroidered with
LSL-logo, Velco-fastener
Colour Item No.

..SI ..GO ..AN 999ST01.. Size Item No.
universal 975-001
LSL-Mousepad LSL-Patches LSL-T-Shirt

Motiv Speed Triple white with LSL Logo white with LSL Logo, 100% cotton
Size Item No. Size Item No. Size Item No.
240 x 190 mm 984M2013 100 x 45 mm 970-1045 S, M, L, XL 972TS01..
105
cont
»www.lsl.eu
Always the best information
On the LSL website you find always the most actual information about
LSL products and activities.
Check out your language: »
106
tent
Index
Aluminium fender p. 98 Handlebar drilling jig p. 21

Aluminium instrument cover p. 102 Handlebar weights p. 26
Fork gaiters p. 104 Head lights p. 86
Brake & clutch reservoir p. 48 - Urban head light p. 86
Brake lever units for rear rrake p. 66 - Classic head lights p. 88
Brake lines p. 50 - Head light brackets p. 89
Brake line banjo bolts p. 51 Ignition lock kit p. 104
Chain guards p. 99 Lever, adjustable p. 46, 76
Clip on Lift pivots p. 67, 76
- Tour clip on p. 40 Merchandise products p. 105
- Sport clip on p. 44 Number plate hanger p. 90
Clubman parts p. 92 Pinion cover p. 99
Instruments p. 102 Rear light p. 91
Crash protection Rear mirror p. 30
- Crash pad p. 68 - Adapter p. 29
- Axle Ball / Clutch Ball p. 75 - Distance Bracket p. 29
Indicator & accessories p. 91 Rear sets
Foot peg bracket, passenger p. 66 - 2Slide p. 56
Foot peg linking, standard & adjustable p. 65, 76 - Standard p. 60
Foot pegs p. 64 Rim kits p. 97
Fork brackets p. 89 Screws, knurled head p. 100
Gear shifter units p. 66 Seats p. 100
Grips p. 28 Steering damper p. 52
Handlebar Superbike conversion kits p. 32
- 22mm p. 13, 17 Tail conversion p. 90, 101
- 25,4mm p. 13, 22 Triple trees p. 96
- 28,6mm p. 13, 14 Wheel sets p. 97
Handlebar clamps Wind screen, cut p. 39
- Clamps for 22mm p. 13, 20
- Clamps for 25,4mm p. 13, 25
- Clamps for 28,6mm p. 13, 16
!
Warning Advice!
If you see this sign, it is advised you
need a trained motorcycle mechanic to
install the product! All parts that come
from your national distributor with the
separate advice “For racing use only” are
not designed for use on public road.
Company Details
Editor
LSL-Motorradtechnik GmbH, D-47809 Krefeld
Composition & Print
Das Druckhaus Beineke Dickmanns GmbH,
D-41352 Korschenbroich
Publication and reprint subjekt to
written permission of editor.
contact 107

LSL Catalogue 2013 GB

Uploaded by

Copyright:

Available Formats

LSL Catalogue 2013 GB

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LSL Catalogue 2013 GB

Uploaded by

Copyright:

Available Formats

» 2013

» LSL-Motorradtechnik GmbH Release 17

Making good bikes perfect

Gas is on the right!

Superbike Conversion Kits Lighting

Clip On Handlebars Clubman Bikes

Brake Engineering Chassis Geometry

Steering Damper Clubman Parts

Rear Sets Merchandise products 105

Four Scramblers for a Hallelujah!

„Due to intensive studies of the Scrambler‘s off-road capabilities ahead

even cosy. And unforgettable. And it even hailed. If

» Project Bike Nuda Roadster

rake: 64,7°, trail 101mm

The idea was fixed – a Classic Roadster on basis of the

» Speed Triple Special – Build your bike

Since our founding, the development and production of

» X-Bar 1 1/8“ to 7/8“

! Please choose corresponding handle-

Carbon fibre casing

The LSL Superbike handlebar is shown

» also Carbon covered available

» also Carbon covered available

» X-Bar 1 1/8“ to 7/8“

anthracite bead blasted » Clamps for 1 1/8“

gold polished Aprilia

gold polished Item No. + ..GO

anthracite bead blasted Item No. + ..MA

black matte bead blasted Item No. + ..MB

Type 03 210 800

For BMW motocycles LSL has developed

it is equipped with welded threads.

Handlebar diameter: 22,0mm

» Standard Handlebar 7/8“

Drag Bar Flat Track

LD2 steel chrome 123LD02CH 45,95

A 12.06.12 1/1 A 12.06.12 1/1

Drilling jigs – for the professional tool set. In ­order

To install the cables the aluminium

LSL Roadster is shown in

! LSL Roadster is shown in grey

Item No. + ..MS

Item No. + ..SW

black polished Wide Bar

L11.0 steel chrome ø 22,2mm 163L011.0 64,95

Material Colour Surface Inner Piece Item No. EUR/

1) zylindrisch/cylindrical, Ø 21mm, Länge/length 16mm

For broadening our handlebars we offer a special

Handlebar Inner Ø Length Item No. EUR/pair

Aluminium Lenkerverlängerung/bar extension

LSL-Sport Grips – the new grips

Stylish handlebar grips

! Colour Surface Identification

gold anodised Item No. + ..GO

black anodised Item No. + ..SW

silver anodised Item No. + ..SI

Material Colour Surface Inner Ø Item No. EUR/Pair

Mirror bracket sets Mirror Adapter Mirror Broadening

Drilling jigs – for the professional tool set. In order

For heavy and extremely fast sport-tourer

» B ars are the same for all clamps. In case of

» b racket to mount the separate

» A s bar end weights can be used all products

» Sport Match » Speed Match » O ffset High

· Stainless Steel braided with

· Aluminium housing, CNC-machined