RAYMING PCB & ASSEMBLY

Analyzing Key Microcontroller PCB Characteristics for Embedded Design

Nowadays, “smart” gadgets, systems, buildings, and even appliances

surround and improve our lives. Yet good judgment requires a brain. And

an embedded system is inevitably the brain of smart gadgets.

Electronics, especially PCBAs that include microcontrollers on board are

called embedded systems. Unlike your PC, laptop, or tablet computer,

a microcontroller is often ideal for a single purpose rather than being

organized to execute software. Hence, a thorough grasp of

microcontrollers’ characteristics is necessary to develop embedded

systems properly.

Table of Contents

What Purposes Do Microcontrollers Serve?

Interestingly, the term “microprocessing” was formerly often used to

describe embedded systems architecture. A microprocessor (MPU), a

central processing unit with extra capability that cooperates with other

chips to complete the onboard computer, or a microcontroller (MCU).

Here, all computing components are on the same chip or IC, can be used

as the central processing unit.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

A new name was necessary due to the rising popularity of circuit boards,

electronics, and systems using these ICs. Furthermore, even if

microcontroller technology is improving, the fundamental

components—memory, a clock or timer, a CPU, and I/O—remain similar to

those of a PC.

ROM (EPROM, EEPROM) with executables preloaded to carry out particular

functions is frequently part of microcontrollers. Nevertheless, flash or

erasable memory is increasingly helpful since it enables off-board and

in-circuit programming/debugging. It provides the bus with external data

and power TX/RX capabilities.

Request PCB Manufacturing & Assembly Quote Now

Key Microcontroller Features

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

The properties of the parts help solid design choose the most suitable

microcontroller for your particular needs out of the many varieties

available.

Central Processing Unit (CPU)

The CPU does the math, keeps track of data, and sends control signals

based on the programmer’s writing. The designer can’t see all the

complicated wiring required to make the CPU work. Nowadays, with

software like C, writing code for microcontrollers is usually pretty easy.

Memory

Flash memory is like a permanent notebook for a microcontroller, holding

all the instructions it needs to do its job. RAM is like a scratchpad for

short-term notes, but those notes get wiped away when the power’s cut.

And the CPU’s internal registers are like its own little notebook for jotting

down notes it needs to keep track of.

Support Circuitry

Because their main job is not to operate, monitor, or connect with

external components, the many functional blocks that microcontrollers

integrate cannot be categorized as peripherals. Yet, they are crucial since

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

they facilitate the device’s internal functionality, streamline

implementation, and advance the development process.

Debug circuitry enables the programmer to see the microcontroller as it

executes commands closely. This is a crucial—and occasionally

required—method of finding faults and improving firmware performance.

A very useful feature of microcontroller operation is interrupts. The CPU

responds to interrupts by quickly executing a specified set of instructions

in response to external or internal hardware-based events.

C-coded microcontroller programs fall into functions. First, a program’s

execution is “vectored” by an interrupt to an interrupt service routine (ISR).

Then, once the ISR has finished, the processor returns to the function

running when the interrupt occurs.

The primary function of a microcontroller’s internal oscillator is frequently

to generate a clock signal for the CPU and peripherals. A clock-generation

module might be a peripheral if designed to provide signals utilized

outside the device. Although internal oscillators usually have low accuracy,

they are a useful and effective way to streamline the design and reduce

board space in applications that accept this low precision.

Several kinds of power-supply circuits can be part of microcontrollers. For

example, supervisor modules can put the processor in a stable reset state

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

when the supply voltage is insufficient to support dependable operation.

In addition, integrated voltage regulators enable on-chip generation of the

necessary supply voltages. As a result, the device’s current inactive

consumption can greatly decrease using power-management

components.

Real-Time Clock (RTC)

Even when the system is off, real-time clocks (RTCs) built into

microcontrollers may maintain track of the time and date. The RTC is a

battery-operated clock that may be helpful for scheduling, alarms, and

time stamping.

Request PCB Manufacturing & Assembly Quote Now

What Microcontroller to Choose for Your Application and How

to Select It

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Knowing the device you’ll use is necessary before designing an MCU-based

product. However, suppose you don’t already have extensive knowledge

in this area. In that case, it’s a good idea to focus on one device and

branch out after gaining some solid experience. The skills and techniques

in designing microcontroller-based systems are undoubtedly not specific

to one part number or manufacturer.

Evaluation Hardware

A thoughtfully constructed, reasonably priced development board may

benefit everyone, from amateurs to experienced engineers. Moreover,

this is often the easiest and most reliable approach to assessing a

microcontroller and becoming acquainted with its functional specifications

and programming interface. Therefore, look for a reasonable cost

evaluation board once you’ve reduced your search to a few potential part

numbers.

Cost and Package Size

As their significance varies widely from one application to another,

including these criteria in a particular step of the part-selection process is

challenging. For example, when designing prototypes or systems that will

never come in large quantities, engineers may have enough board space

and be able to ignore package size considerations fully.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

On the other hand, most electronic items must be either extremely tiny

and affordable or very small or both. Therefore, you must always know

pricing and package size while filtering out parts based on your essential

criteria and favorite manufacturers.

Critical Parameters

Choose the most critical and specific criteria for choosing a

microcontroller. They include internal oscillators, clock rates over 10 MHz,

enough Flash and RAM, general-purpose timers, or built-in debugging

modules. DACs are less frequent than analog-to-analog converters, which

are more popular. Devices that support high processor frequencies

should have priority if an ADC with an abnormally high resolution or

sampling rate is necessary. For example, the C8051F060 from Silicon Labs

includes two integrated ADCs. They can convert 16-bit data at one million

samples per second.

Data transfer between an embedded device and a Computer requires the

use of the USB interface. High-performance 32-bit MCUs from

STMicroelectronics and Microchip run at 120 MHz. On the other hand,

Silicon Labs provides two 8-bit families that operate at 100 MHz. Pay

attention to microcontrollers with a USB module if you’re seeking a simple,

portable way to add a USB connection to your system. In addition, it is

advantageous to have a microcontroller especially designed to

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

accommodate capacitive touch sensing, an increasingly common user

interface. Prioritize this functionality while choosing parts since capacitive

touch sensors are still uncommon in microcontrollers.

Request PCB Manufacturing & Assembly Quote Now

Choosing a Manufacturer

There are a lot of semiconductor firms that provide microcontrollers for

sale. Nonetheless, it would be best if you began with a producer giving

their microcontroller category much attention. As a result, you will have

full access to a wealth of valuable design materials, such as app notes,

example code, a top-notch integrated development environment (IDE),

practical programming tools, and so on.

Additionally, you can more easily fine-tune your element selection based

on each application’s requirements when working with manufacturers

with larger MCUs. You can select a new part number without going

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

through the significant changes brought on by switching from one

manufacturer to another.

Related Posts:

1. How to Design Your Own Custom Microcontroller Unit – MCU PCB

2. Embedded Electronics Design: Making a Big Splash with Tiny

Technology

3. What are the Characteristics of Copper Coin PCB?

4. Top Benefits and Characteristics IoT Industry 4.0

https://www.raypcb.com/microcontroller-pcb/

PCB Manufacturing & Assembly Services https://www.raypcb.com/