PAT Booklet

PAT
Perform, Achieve and Trade
Ministry of Efficiency
Bureau of Energy Power
Government
Ministry ofofPower
India
July 2012
Government of India
Contents
1. Introduction 1
2. National Mission for Enhanced Energy Efficiency 2
3. Perform, Achieve and Trade 3
4. Target Setting Methodology 4
5. PAT Sectors 6
i. Aluminium 6
ii. Cement 7
iii. Chlor – Alkali 11
iv. Fertilizer 12
v. Iron and Steel 15
vi. Pulp and Paper 17
vii. Textile 19
viii. Thermal Power Plants 21
6. Next Steps 23
7. Conclusion 25
8. Annexure 1: Notification of Targets 26
9. Annexure 2: PAT Rules 88

1. Introduction Achieving national growth objectives through
a qualitative change in direction that enhances
The National Action Plan on Climate Change ecological sustainability, leading to further
(NAPCC) released by the Hon’ble Prime mitigation of greenhouse gas emissions,
Minister on 30th June, 2008, recognizes devising efficient and cost-effective strategies
the need to maintain a high growth rate for end user Demand Side Management
for increasing living standards of the vast (DSM), deploying appropriate technologies
majority of people and reducing their for both adaptation and mitigation of
vulnerability to the impacts of climate change. greenhouse gases emissions extensively as
NAPCC outlines a comprehensive policy well as at an accelerated pace, and engineering
framework that seeks to protect the poor new and innovative forms of market,
and vulnerable sections of society through regulatory and voluntary mechanisms to
an inclusive and sustainable development promote sustainable development are the key
strategy, sensitive to climate change. strategies of the NAPCC.
Bureau of Energy Efficiency 1

2. National Mission for sustain, markets for energy efficiency in a
transparent manner with clear deliverables
Enhanced Energy Efficiency to be achieved in a time bound manner. It
NAPCC outlines Eight National Missions, also has inbuilt provisions for monitoring
representing multi-pronged, long-term and evaluation so as to ensure transparency,
and integrated strategies for achieving key accountability, and responsiveness. The
goals in the context of climate change. The Ministry of Power (MOP) and Bureau of
National Mission for Enhanced Energy Energy Efficiency (BEE) were tasked to
Efficiency (NMEEE) is one of the eight prepare the implementation plan for the
national missions with the objective of NMEEE. NMEEE spelt out the following four
promoting innovative policy and regulatory new initiatives to enhance energy efficiency,
regimes, financing mechanisms, and business in addition to the programs on energy
models which not only create, but also efficiency being pursued. They are:
NMEEE – Four New Initiatives

• Perform Achieve and Trade (PAT): A market based mechanism to enhance cost
effectiveness of improvements in energy efficiency in energy-intensive large industries
and facilities, through certification of energy savings that could be traded.
• Market Transformation for Energy Efficiency (MTEE): Accelerating the shift to energy
efficient appliances in designated sectors through innovative measures to make the
products more affordable
• Energy Efficiency Financing Platform (EEFP): Creation of mechanisms that would
help finance demand side management programmes in all sectors by capturing future
energy savings.
• Framework for Energy Efficient Economic Development (FEEED): Developing fiscal
instruments to promote energy efficiency
2 Ministry of Power
3. Perform, Achieve and Trade PAT is a market based mechanism to enhance
cost effectiveness of improvements in
Designated Consumers, as notified under the energy efficiency in energy-intensive large
Energy Conservation Act, 2001, account for industries and facilities, through certification
25% of the national gross domestic product of energy savings that could be traded. The
(GDP) and about 45% of commercial energy genesis of the PAT mechanism flows out of
use in India. Since year 2000, industrial GDP the provision of the Energy Conservation
has been growing at the rate of 8.6% annually, Act, 2001, hereinafter referred to as the Act.
whereas energy use in industry is growing at a Section 14 (e) of the Act empowers the Central
comparatively lower growth rate of 5.8%. The Government to notify energy intensive
lower rate of growth of industrial energy use industries, as listed out in the Schedule to
can be attributed to many reasons. It has been the Act, as Designated Consumers (DCs).
observed that in recent years, industry has been The Ministry of Power (MoP) has notified
choosing state-of-the-art technologies, which industrial units and other establishments
are more energy-efficient. Also, there have been consuming energy more than the threshold
many in-house efforts made by the industry in 9 sectors namely Thermal Power Plants,
to become more energy-efficient. In order to Fertilizer, Cement, Pulp and Paper, Textiles,
further accelerate as well as incentivize energy Chlor-Alkali, Iron & Steel, Aluminum and
efficiency, the Perform Achieve and Trade Railways in March, 2007 as DCs.
(PAT) mechanism has been designed.
Minimum annual energy consumption and estimated number of

Designated Consumers (DCs) in select sectors
Sector Minimum annual energy consumption for No. of DCs

the DC (tonnes of oil equivalent)
Aluminium 7500 10
Cement 30000 85
Chlor-alkali 12000 22
Fertilizer 30000 29
Iron and steel 30000 67
Pulp and paper 30000 31
Textile 3000 90
Thermal power plant 30000 144
Total 478

4. Target Setting Methodology a) Methodology for establishing the
baseline energy consumption
The Bureau of Energy Efficiency (BEE) has
carried out the background work to enable b) Methodology for target setting for each
design of a transparent, flexible, efficient sector
and robust system for the PAT mechanism.
c) The process of measurement and
In compliance with the directions of the
verification, in particular the verification
Prime Minister’s Council on Climate Change,
agencies that need to be appointed by
BEE consulted all the key stakeholders
BEE for this purpose.
like Designated Consumers, Energy
Auditors/ Managers, Industry Associations, d) The manner in which trading of the
Academician, etc. to solicit comments on the certificates can be encouraged, in
following aspect while framing complete particular instruments that could
mechanism for PAT scheme: increase liquidity in the system.
BEE used steps as mentioned in the diagram different designated consumers having regard
for the implementation of the PAT scheme. to such factors as may be prescribed] the
central government can stipulate energy usage
As per Section 14(g) of EC Act, 2001 [establish norms for designated consumers.
and prescribe such energy consumption
norms and standards for designated BEE had earlier conducted sector specific
consumers as it may be considered necessary: studies through various organizations to do the
provided that the central government may situation analysis. As per the studies, the wide
prescribe different norms and standards for bandwidth of specific energy consumption
4 Ministry of Power
(SEC) within an industrial sector is indicative improvement targets can be based on the trend
of the large energy-savings potential in the of energy consumption and energy-savings
sector. The wide bandwidth is also a reflection potential of the plants. In general, the higher
of the differences in the energy-saving the energy efficiency (or the lower the SEC),
possibilities amongst plants because of their the lower the energy-savings potential. Thus,
varying vintage, production capacity, raw it is evident that it is not feasible to define a
material quality, and product-mix. Such wide single norm/standard unless there is significant
variation also makes it difficult to specify a homogeneity amongst units in a sector.
single benchmark SEC for the sector as a whole: Therefore, the energy efficiency improvement
older plants will find the benchmark impossibly targets fixed are “unit specific”. Each DC is
high if it is set at the level of newer plants; mandated to reduce its SEC by a certain value,
newer plants will find it trivial if it is set at the based on its current SEC (or baseline SEC)
level of older plants. The broad bandwidth within the sectoral bandwidth.
of SEC within a sector, and the inability of all
plants to achieve a sectoral benchmark SEC, The SEC of an industry is calculated based
suggests that SEC improvement norms need on Gate-to-Gate concept with the following
to be set for individual plants. These SEC formula:
Specific energy consumption (SEC) =

net energy input into the designated consumers’ boundary
total quantity of output exported from the designated consumers’ boundary
and expressed in terms of the metric ton of all energy sources is converted into single unit
oil equivalent (toe)/per unit of product. While i.e. toe (metric ton of oil equivalent) using
calculating the total energy input to the plant, standard engineering conversion formula.
Sector wise Energy consumption and Energy Saving Targets under PAT Cycle-1 (2012-15)
Sr Sector No. of Identified DCs PAT Energy Saving Targets under

No Cycle-1 PAT Cycle-1 (million toe)
1 Aluminium 10 0.456
2 Cement 85 0.816
3 Chlor-Alkali 22 0.054
4 Fertilizer 29 0.478
5 Iron & Steel 67 1.486
6 Pulp & Paper 31 0.119
7 Textile 90 0.066
8 Thermal Power Plants 144 3.211
Total 478 6.686

aluminium production in India is about 3% of
the global capacity.
Primary aluminium production is having

two major steps: first is refining of bauxite to
alumina and second is smelting of alumina to
aluminium. Smelting is an energy intensive
process and consumes electrical energy,
The plant boundary is selected in such a way accounting for about 85%–90% of the electrical
that the total energy input and the above energy consumption.
defined product output is fully captured.
Typically it is the entire plant excluding Significant energy conservation opportunities
colony, residential complex and transportation exist in Indian aluminium units in the
system. Similarly, mining operations in case of following areas:
Iron & Steel, Aluminium and Cement sector • Primary smelter could be replaced by a
are not part of plant boundary. Once the plant point feeder pre-baked (PFPB) smelter
boundary has been fixed, the same boundary with an inert anode/wetted cathode
will be considered for entire PAT cycle. technology.
The energy saving targets of 8 sectors covered • Changing of the Soderberg process to
under PAT cycle 1 is 6.686 million toe the prebaked process.
distributed among 478 designated consumers.
The reduction target for each plant is based on • Adoption of tube digesters for the
an objective and transparent basis. dissolution of bauxite and fluidized
bed calciners with pre-heaters of
anhydrous alumina.
5. PAT Sectors • Improved electrolyte bath technology
to minimize the re-oxidation of metal.
i. Aluminium
India has the fifth largest reserves of bauxite, • Higher amperage with point feeders
the raw material used in production of and computerized control system.
aluminium, with deposits of about 2.3 billion • Improved performance of carbon
tons (6.76% of the world deposits). The total anode baking furnaces.
6 Ministry of Power
Specific Energy Consumption and Targets – Aluminium
In aluminium sector, to become a designated national energy saving targets assessed under
consumer the threshold limit is 7500 toe PAT.
and in PAT cycle-I, 10 nos. of designated
consumers from Odisha, Karnataka, ii. Cement
Jharkhand, Chhattisgarh, Maharashtra
and Uttar Pradesh have been identified for India is the second largest cement market
which the target have already been notified. in the world, accounting for about 6% of
Aluminium sector has been categorized on the world’s cement production. Despite its
the basis of their process in to four subsector potential for rapid growth, the per capita
i.e. Refinery, Smelter, Integrated and Cold cement consumption in India accounts for
sheet mill. The total average reported energy 136 kg, which is much lower than the world
consumption of these designated consumers average (396 kg) and the averages of other
is about 7.71 million ton of oil equivalent/year developing countries like Brazil (191 kg) and
in the baseline period (2007-10). By the end of Thailand (366 kg).
the first PAT cycle, the energy savings of 0.456 There are about 148 large cement plants in the
million ton of oil equivalent /year is expected country with an installed capacity of 219.17
to be achieved, which is around 7% of total MTPA and more than 350 mini-cement plants

with an estimated capacity of 11.1 MTPA, The cement industry uses coal and electricity as
making the total installed capacity of 230.27 the main sources of fuel. Energy cost accounts
MTPA up to year 2009/10. Due to the demand for about 40% of the total manufacturing cost
in the past and recent growth of economy, the in some of the cement plants and coal accounts
capacity of the industry has increased by 21.41 for 15%–20% of the total production costs.
MTPA. The specific thermal energy consumption
and electrical energy consumption for state-
of-the-art cement plants are as low as 658
kcal/kg of clinker and 67 kWh/ton of cement,
respectively. These are comparable with the
best cement plants in Japan, where the specific
thermal energy consumption and electrical
energy consumption are 650 kcal/kg of clinker
and 65 kWh/ton cement respectively. Various
energy audit studies have estimated that
about 5% energy saving is possible in both
thermal energy consumption and electrical
energy consumption in cement plants through
the adoption of various energy conservation
measures.
8 Ministry of Power
Some of the important energy-efficient • Mechanical conveying system in place
technologies that can be adopted in cement of pneumatic conveying
plants are outlined below.
• Effective utilization of compressed air
• Blended cement can be manufactured and avoid idle running of equipment.
from wastes such as slag and fly ash.
• Utilization of waste heat to different
• Vertical Roller Mill (VRM) with high- processes such as drying of raw
efficiency separators and high-pressure materials/coal, pre-heater and cooler
roller press could be utilised. exhaust gases leads to successful
cogeneration as well.

Specific Energy Consumption and Targets- Cement
10 Ministry of Power
The threshold limit of 30000 toe has been year 2009-2010 was 23.26 lakh MTPA. The
defined in PAT for cement sector, and 85 nos. production of caustic soda is associated with
of designated consumers have been identified chlorine. This inevitable co-production has
from various States. been an issue for the chlor-alkali industry.
Both products are used for very different end
Cement sector has been categorized on users with differing market dynamics and it is
the basis of their product/process in to only by rare chance that demand for the two
seven subsectors i.e. Portland Pozzolana coincides. The Indian chlor-alkali industry is
Cement(PPC), Ordinary Portland driven by the demand for caustic soda, and
Cement(OPC), Portland Slag Cement (PPC), chlorine is considered a by-product.
Wet Plants, White Plants, Grinding Plants and
only Clinkerization Plants. The total reported Some of the important energy-efficient
energy consumption of these designated technologies that can be adopted in Chlor-
consumers is about 15.01 million ton of oil Alkali plants are outlined below
equivalent ( million toe). By the end of the first
PAT cycle, the energy savings of 0.816 million • Change of membranes & Electrodes re-
ton of oil equivalent /year is expected to be coating
achieved, which is around 12% of total national • Use a centrifugal chlorine compressors
energy saving targets assessed under PAT. in place of multiple liquid seal ( H2
SO4) chlorine compressors
iii. Chlor – Alkali
• Use MEG based chlorine evaporators
The chlor-alkali industry consists of the instead of using steam to supply
production of three inorganic chemicals: chlorine gas to user industry or in-
caustic soda (NaOH), chlorine (Cl2) and soda house consumers
ash (Na2CO3). Caustic soda and chlorine are
produced simultaneously while soda ash is • Optimization of Electrolysers for current
produced during a different process. consumption by monitoring cell voltages
and replacing membranes in time
• Heat recovery by Provision of Brine

and Chlorine re-cuperator for pre
heating the feed brine towards the Cell
In chlor-alkali sector to become a designated

consumer the identified threshold limit is
The caustic soda industry in India is 12500 toe and in first PAT cycle, 22 designated
approximately 65 years old. There are 40 consumers from various States have been
major caustic soda plants with an average identified for which the target have already
plant size of 150 tons per day (TPD), which been notified. Chlor-alkali sector has been
is relatively small compared to sizes found categorized on the basis of their process in
in developed countries (500 TPD). During to two subsectors i.e. membrane based and
the last five years, caustic soda production mercury based. The total reported energy
has increased at an average annual growth of consumption of these designated consumers is
4.2%. Production of Caustic Soda during the about 0.88 million ton of oil equivalent/year.

Specific Energy Consumption and Targets- Chlor -Alkali
Chlor-alkali plants are further divided into for 83 % of the total nitrogen production.
two categories i.e. captive based plants and Other nitrogenous fertilizers are ammonium
non-captive i.e. Grid connected plants. Specific sulphate (AS) and calcium ammonium
energy consumption varies from 0.262to 0.997 nitrate (CAN), which are produced in smaller
toe/t of these 22 designated consumers. By the quantities. Among complex fertilizers, di-
end of the first PAT cycle, the energy savings ammonium phosphate (DAP) and various
of 0.054 million ton of oil equivalent /year is grades of NP/NPK are produced. Apart from
expected to be achieved, which is 0.81% of these, single super phosphate (SSP), also
total national energy saving targets assessed contributes to the phosphate production.
under PAT. There are about 141 fertilizer plants in
operation in India. Out of these, 29 units
iv. Fertilizer produce urea, 19 units produce diammonium
phosphate (DAP) and NP/NPK complex
Fertilizer industry in India has grown to its fertilizers, 82 units produce single super
present size during five decades starting phosphate (SSP), 11units produce ammonium
with 1960s. With the total production of sulphate, calcium ammonium nitrate and
about 38.6 Million Tons (MT) of fertilizer ammonium chloride. The addition of urea
products containing 16.5 Mt of plant nutrients capacity remained unchanged since 1999.
(N + P2 O5), India is the second largest
producer of fertilizers in the world. India
with consumption of 28.12 MT of nitrogen
(N), phosphate (P) and potash (K) is the
third largest consumer of fertilizers in the
world. Fertilizer industry in India is world
class in terms of size of plant, technology
used and efficiency levels achieved. India
produces both nitrogenous and phosphatic
fertilizers with installed capacity of 12.947
MT nitrogen and 6.201 MT of P2 O5. Urea is
the major nitrogenous fertilizer and accounts
India is completely dependent on import of nitrogenous fertilizers. Globally, over
of potassic fertilizers mainly as potassium 80% of all ammonia manufactured is used
chloride. India produced about 22 MT urea in the production of nitrogenous fertilizers,
in 2010-11. About 18 MT urea was produced and urea is the main nitrogenous fertilizer
using gas as feedstock, while balance about 4 manufactured in India. The feedstocks used
MT is produced using naphtha and fuel oil as for ammonia production are natural gas,
feedstock. naphtha, and fuel oil. Coal based units have
been closed due to non-economic viability and
Among all the processes in the fertilizer high specific consumption levels. Among the
industry, production of nitrogenous fertilizers feedstock, natural gas-based fertilizers are the
is the most energy intensive. Ammonia is most energy efficient, followed by naphtha-
used as the basic chemical in the production based fertilizers.

Most of the existing plants in operation, have by the end 2012. . Six naphtha based plants
upgraded the technology continuously by are ready to use gas but do not have pipeline
way of revamp, retrofit and replacements. connectivity.
Some of the major up-gradations are
incorporation of radial-axial or radial flow There are 29 urea plants in operation in the
ammonia converters, additional heat recovery country with capacity of 22.21 MT per annum.
from furnace flue gases, revamp of CO2 Most of these plants are of 1980s and 1990s
removal section with better solvent, improved vintage. With continuous efforts for up-
packing of absorption / desorption towers, gradation of technology, these plants have
additional purification of synthesis gas, use brought down energy consumption from 8.42
of more efficient catalyst, refurbishing or Gcal/t in 1990-91 to 6.24 Gcal/t urea in 2010-11.
replacement of rotating machines including The major modernization measures include
major compressors and turbines, better heat two stage concentration, more efficient trays
integration, utilization of low level heat etc. in urea reactor, recovery of nutrients from
process effluents, recycle of treated process
Four plants using fuel oil as feedstock are condensate, refurbishing or replacement of
preparing to use gas as feedstock with total rotating machines etc. Most urea plants have
investment of the order of Rs 5000 core. energy consumption within range of 5.25 to
These plants will be ready to change to gas 6.0 Gcal/t urea.
Specific Energy Consumption and Targets- Fertilizers
In Fertilizer Sector, for manufacturing of considering heat energy of ammonia as 4.46

Urea fertilizer, out of total energy consumed Gcal/t Ammonia and specific consumption
at designated consumer plant boundary, 0.567 t of Ammonia / t Urea.
stoichiometric energy of 2.53 Gcal/t Urea
is contained in urea product and goes out By the end of the first PAT cycle, the energy
as such. Thus, the net energy utilized in savings of 0.478 million ton of oil equivalent
urea manufacture is total energy input at /year is expected to be achieved , which is
designated consumers’ boundary reduced by 7.15 % of total national energy saving targets
2.53 Gcal/t Urea. The figure is worked out by assessed under PAT.
v. Iron and Steel as compared to the previous year. In 2003/04,
an average growth of 7.3% in the production of
The Indian iron and steel industry can be
total finished steel was registered. The domestic
broadly categorized into integrated steel
consumption of the total finished steel declined
producers and secondary steel producers.
marginally (by 0.53%) at 51.85 MT. India
Integrated steel producers have traditionally
exports about 3.75 MT of finished steel, which
integrated steel units with captive plants
has decreased by 26%, while imports were
for iron ore and coke, which are the main
estimated at 5.77 MT, a decline of 18%.
inputs. Secondary producers use steel scrap,
sponge iron/ direct reduced iron (DRI) or
hot briquetted iron (HBI) as raw materials. It
mainly comprises electric arc furnace (EAF)
units and induction furnace units, apart from
other manufacturing units like independent
hot and cold rolling units, rerolling units,
galvanizing and tin plating units, sponge iron
producers, pig iron producers, and so on.
The crude steel production during 2008/09

was 54.52 Million ton (MT) as against 53.86
MT in 2007/08, showing an annual growth
of 1.23%. Production for sale of total finished
steel was 56.39 MT, which is a growth of 0.6%

Production of iron and steel involves energy- of the energy-efficient technologies that are
intensive processes. At present, the specific actively pursued by the steel industry are as
energy consumption of large integrated Indian follows.
steel plants is 6.5–7.0 Gcal/ ton of crude steel
as against the international norm of 4.5–5.5 • Installation of energy recovery coke
Gcal/ton. ovens to meet power requirements.
Indian steel plants have undertaken several • Installation of top gas recovery
energy efficiency improvement measures to turbines in blast furnaces.
reduce overall manufacturing costs. Some • Use of non-coking coal in iron making.
Specific Energy Consumption and Targets- Iron & Steel
Specific energy consumption varies from capacity of 1.1 MT have been closed.
0.0527 to 1.907 toe/t for these 67 designated
consumers. By the end of the first PAT cycle,
the energy savings of 1.486 million ton of oil
equivalent /year is expected to be achieved,
which is around 22% of total national energy
saving targets assessed under PAT.
vi. Pulp and Paper

The Indian pulp and paper industry ranks
fifteenth at the global level. However, the per The total installed capacity of the paper
capita consumption of paper in India is low industry during 2008/09 remained at 9.2 MT.
(7.2 kg) as compared to 45 kg in China, 234 Based on the installed capacities, Indian paper
kg in Japan, 297 kg in USA, and the global mills are categorized as large mills and small
average of 54 kg. There are about 715 paper mills. Large mills have an installed capacity of
industries engaged in the manufacture of more than 100 tons per day (TPD), while small
pulp, paper, and paperboards, of which about mills have an installed capacity of less than
25 units are wood-based mills, 139 units are 100 TPD. The total installed capacity of the
agro-based mills, and 551 are recycled fibre- paper industry increased to 9.2 MT in 2008/09
based mills. About 98 units with an installed from 7.8 MT in 2007/08.

The paper industry uses coal and electricity draft (ID) fans and forced draft (FD)
as the main energy sources. Apart from these, fans.
low sulphur heavy stock (LSHS), furnace oil
• Proper temperature control in slaking
(FO), light diesel oil (LDO), and high-speed
and causticizers to reduce steam
diesel (HSD) oil are used for steam generation
consumption.
and captive power generation. Energy costs
account for 15%–20% of the total production • Better instrumentation loop in agitators.
costs in India as compared to 10% in USA. • Cascading system for efficient use of
Process optimization, waste heat recovery, steam in the dryer section of the paper
and cogeneration systems offer significant machine.
scope for improving the performance of • Vacuum piping with minimum bends
Indian paper mills. in the paper machine section.
Other energy conservation measures, which • Replacement of beaters by double disc
require marginal or no investments and refiners in small paper mills.
would result in 5%–10% energy savings, are • Adoption of biomethanation.
listed below.
• Use of de-silication technology for
• Excess air control in boilers through silica-rich raw materials such as rice
ducting design and instrumentation to straw, bagasse, and bamboo-based raw
help in reducing the load on induced materials.
Specific Energy Consumption and Targets- Pulp & Paper
In Pulp & paper sector, to become a include the spinning mill or the composite
designated consumer the identified threshold mill. The decentralized power-loom/hosiery
limit is 30,000 toe and in first PAT cycle 31 and knitting sectors form the largest section
designated consumers from various states of the textile industry. The major sub-sectors
have been identified for which the target have of the Indian textile industry consist of the
already been notified. Pulp & paper sector organized cotton/man-made fibre textiles
has been categorized on the basis of their mill industry, man-made fibre/filament
Raw material in to three subsectors i.e. Wood yarn industry, wool and woolen textiles
based ,Agro based, and Recycled fiber based industry, sericulture and silk textiles industry,
(RCF). The total reported energy consumption handlooms, handcrafts, jute and jute textiles
of these designated consumers is about 2.08 industry, and textile exports.
million ton of oil equivalent.
Specific energy consumption varies from 0.202

toe/t to 0.878 toe/t for these 31 designated
consumers. By the end of the first PAT cycle,
Energy cost in the textile industry accounts

vii. Textile
for 5%– 17% of the total production cost. Coal
India ranks second in the textile industry and furnace oil are used for the generation
sector in the world. The Indian textile industry of steam in boilers for process heating
contributes about 14% to the industrial applications. According to the Asian Regional
production, 4% to the GDP, and 17% to the Research Program in Energy, Environment,
country’s export earnings. The textile industry and Climate (ARRPEEC) survey, the energy
in India can be classified into the organized consumption of the textile industry is 3–3.5
sector and the decentralized/rural sector. kWh/kg of yarn in a modernized spinning
The organized sector comprises mills, which mill, 0.09–0.2 kWh/kg of fabric in knitting

units, and 0.04–0.15 kWh/kg of fabric in • Use of smaller wrap diameter spindles.
dyeing. In fabric dyeing units, consumption of
steam may vary from 4 kg to 9 kg of steam per • Installation of radio-frequency driers.
kg of fabric. • Use of foam technique for printing and
A number of textile units have made finishing.
significant efforts towards energy • Use of renewable energy, specifically
conservation through short- and medium- solar thermal applications for
term measures. The reported energy saving generating low grade heating.
potential in textile industries is up to
15%. Various energy saving opportunities • Energy Efficient automatic waste
applicable to the textile industry include the evacuation system with polymer
following. pipeline.
• Use of variable frequency drives for • Reducing warve-dia of ring spindle.

fans of humidification plants.
• Adiabatic Nebulization and similar
humidification system.
Specific Energy Consumption and Targets- Textile
In Textile sector, to become a designated viii. Thermal Power Plants
consumer, the threshold limit is 3000 toe and
India is the sixth largest in terms of power
in first PAT cycle 90 designated consumers
generation. About 65% of the electricity
from various states have been identified for
consumed in India is generated by thermal
which the target have already been notified.
power plants, 22% by hydroelectric power
Textile sector has been categorized on the
plants, 3% by nuclear power plants and rest
basis of their process in to four sub sector i.e.
10% from other alternate sources like solar,
Spinning, Processing, Composite & Fiber. The
wind, biomass etc. 53.7% of India’s commercial
total reported energy consumption of these
energy demand is met through the country’s
designated consumers is about 1.20 million
vast coal reserves. The country has also
ton of oil equivalent/year.
invested heavily in recent years on renewable
Textile plants are further divided into two sources of energy such as wind energy. As of
categories i.e. captive power plant based April 2012, India’s installed Renewable energy
plants and non-captive i.e. grid connected generation capacity stood at about 24,503 MW.
plants. Specific energy consumption varies
Due to India’s economic rise, the demand for
from 0.199 to 5.2 toe/t across the sector except
energy has grown at an average of 3.6% per
couple of outliers. By the end of the first PAT
annum over the past 30 years. At the end of
cycle, the energy savings of 0.066 million
April 2012, the installed power generation
ton of oil equivalent /year is expected to be
capacity of India stood at 2,01,637 MW, while
achieved, which is 0.99% of total national
the per capita energy consumption stood at
energy saving targets assessed under PAT.
813.5 kWh (2010-11).

have been identified for which the target have
already been notified. Thermal Power Plant
sector has been categorized on the basis of
their fuel input in to three subsector i.e. gas,
oil and coal based plants. The total reported
energy consumption of these designated
consumers is about 104 million ton of oil
equivalent. By the end of the first PAT cycle,
In Thermal Power Plant sector to become a
designated consumer the identified threshold
limit is 30000 toe and in first PAT cycle 144
designated consumers from various states
Specific Energy Consumption and Targets- Thermal Power Plants
Specific energy consumption (net heat rate) designated consumer, over and above the
varies from 1774 kcal/kWh to 5134 kcal/kWh target savings. Each certificate will be unique
for these 144 designated consumers. tradable commodity which will be traded in
two exchanges i.e. Indian Energy Exchange
(IEX) and Power Exchange of India (PXIL).
6. Next Steps First ESCert will be issued after completion of
one financial year in 2013-14. For the issuance
An ESCert will be an instrument issued by
of ESCerts and compliance of PAT scheme,
Ministry of Power/BEE for a one ton of oil
following time lines needs to be followed by
equivalent of energy savings achieved by the
each designated consumer.
Description Mandatory Voluntary

Submission of Form 1 Once in a year NA
Submission of Form A Once in 3 years Before Compliance year
(Performance Assessment Document)
Submission of Form B Once in 3 years Before Compliance year
(Verification by Accredited Energy Auditor for
Verification)
Issuance of ESCerts Once in 3 years Before Compliance year
Submission of Form D Once in 3 years NA
(Performance Compliance Document)
After submission of Form 1 and Form A, B to BEE within 3 months from the last day of
the Designated Consumer has to hire an the financial year. This process is mandatory
accredited energy auditor, from the list of BEE after the last financial of the cycle, whereas
empanelled accredited energy auditors for the designated consumer can submit these
verification of these forms. Accredited energy documents after verification in the voluntary
auditor will verify Form 1 and Form A and phase for issuance of ESCerts.
submit certificate of verification through Form

When a designated consumer achieve and appropriate number of ESCerts to “meet”
surpass the target, it can sell its excess savings its energy savings targets. Monitoring
in the form of Energy Savings Certificates and verification of energy savings will be
(ESCerts), and if a designated consumer fails conducted by Accredited Energy Auditors
to achieve its targets, it must purchase the through a transparent system.
The Rules for the PAT scheme were notified mechanism. The 478 designated consumer
by the Central Government on 30th March, plants offer an energy saving potential of
2012 and provides complete mechanism to 6,686,000 ton of oil equivalent/year(6.686
be followed by the designated consumer. The million toe/year) at the end of first phase of
notifications of the targets and the Rules are PAT Cycle (2012- 2015).
available at www.bee-india.nic.in
PAT is one of the most promising initiatives
to achieve the goal by implementing Best
7. Conclusion Available Practices and Technologies in the
identified sectors through economical viable
Introduction of Perform, Achieve and Trade projects. Broader implementation of sectoral
Scheme for Energy Intensive Industries crediting mechanisms could ensure that
improves energy efficiency and facilitates low‐carbon technologies are also used more
cost effectiveness by certifying energy saving widely, which in turn would encourage Indian
that could be traded due to its market based industries to invest in these technologies.

8. Annexure 1: Notification of Targets
Ministry of Power
Notification
New Delhi, the 30th March, 2012
S. O. 687(E).- In exercise of the powers conferred by clause (g) and (n) of section 14 of the Energy
Conservation Act, 2001 (52 of 2001), the Central Government, in consultation with the Bureau
of Energy Efficiency, hereby specifies for the designated consumers mentioned in column (2)
of the following Sector Table, the energy consumption norms and standards mentioned in the
corresponding entry in column (4) of the said Sector Table as the energy consumption norms
and standards for the period from 2012-13 to 2014-15 in relation to their current level of energy
consumption, being the baseline energy consumption norms and standards mentioned in column
(3) of the said Sector Table, established under the Energy Conservation (Energy Consumption
Norms and Standards for Designated Consumers, Form, Time within which, and Manner of
Preparation and Implementation of Scheme, Procedure for Issue of Energy Savings Certificates and
Value of Per Metric Ton of Oil Equivalent of Energy Consumed) Rules, 2012, namely:-
SECTOR TABLE
(i) Aluminum
S. No. Designated consumer Baseline energy Energy
consumption norms and consumption
standards in metric ton of norms and
oil equivalent (TOE) per standards in
unit of product for the metric ton of
baseline year (average of oil equivalent
three years). (TOE) per unit
of product for
target year.
(1) (2) (3) (4)
Name, Address and State Specific Product Specific energy
energy Output consumption
consumption (Ton) (TOE/Ton of
(TOE/Ton of product)
product)
1 Hindalco Industries Limited 0.241 376733 0.231
Post Bag-1, Belgaum, Pin-590010
Karnataka
2 Vedanta Aluminium Ltd 0.322 762195 0.304
P. O. Lanjigarh , via Biswanathpur
Dist .- Kalahandi, Pin-766027
Odisha
(1) (2) (3) (4)
Name, Address and State Specific Product Specific energy

energy Output consumption
consumption (Ton) (TOE/Ton of
(TOE/Ton of product)
product)
3 National Aluminium Company 0.325 1559767 0.307
Limited
Mines & Refinery Complex,
Damanjodi, Dist- Koraput Pin-763008
Odisha
Muri, Ranchi, Pin-835101
Jharkhand
5 Bharat Aluminium Company Limited 4.718 252305 4.514
P.O. Balco Nagar, Korba, Pin-495684
Chhattisgarh
Hirakud Smelter, Hirakud, Dist-
Sambalpur, Pin-768016
Odisha
7 National Aluminium Company 5.474 383988 5.199
Limited
S & P Complex, At/Po: Nalconagar,
Dist-Angul, Pin-759145
Odisha
8 Vedanta Aluminium Limited 6.405 215641 6.028
Village - Burkhamunda, P.O. Sripura,
Jharsuguda, Pin-768202
Odisha
P. O. Renukoot, Dist- Sonbhadra, Pin-
231217
Uttar Pradesh
Plot No. 2, MIDC Taloja, A.V, Navi
Mumbai, Dist Raigad, Pin-410208
Maharashtra

(ii) Chlor-Alkali
(1) (2) (3) (4)

Name, Address and State Specific energy Product Specific energy
consumption Output consumption
(TOE/Ton of (Ton) (TOE/Ton of
product) product)
1 Aditya Birla Chemicals India Ltd. 0.997 90,777 0.928
Garhwa Road, PO: Rehla, Dist.
Palamau, 822124
Jharkhand
2 Aditya Birla Nuvo Ltd. (Indian 0.273 94,527 0.259
Rayon)
Unit: Indian Rayon, Caustic & Power
Plant, Veraval, Dist. Junagarh, 362266
Gujarat
3 Chemplast Sanmar Limited 0.335 49,942 0.313
Melavanjore, Karaikal Region, U.T. of
Puducherry
Puducherry
4 Chemplast Sanmar Ltd. Plant-[3] 0.333 57,808 0.312
Veerakkalpudur, Raman Nagar Post,
Mettur Dam, Salem District
Tamil Nadu
5 DCM Shriram Consolidated 0.305 106,142 0.287
Ltd (Shriram Vinyl & Chemical
Industries)
Chlor Alkali Plant, Shriram Nagar,
Kota-324004
Rajasthan
6 DCW Ltd. 0.303 85,678 0.286
Sahupuram, Tutucorin District,
628229
Tamil Nadu
7 Grasim Industries Limited, Chemical 0.310 226,141 0.291
Division
Chemical Division, Birlagram,
NAGDA, 456331
Madhya Pradesh
(1) (2) (3) (4)
product) product)
8 Gujarat Alkalies and Chemicals Ltd. 0.262 266,402 0.249
At & PO: Dahej, Taluka: Vagara,Dist.
Bharuch, 392130
Gujarat
9 Gujarat Alkalies and Chemicals Ltd. 0.277 179,708 0.262
P.O. Petrochemicals, Dist. Vadodara,
391346
Gujarat
10 Gujarat Fluorochemicals Ltd. 0.286 54,736 0.271
Plot No: 12/A, Dahej GIDC Complex,
Vagra, Bharuch - 392130
Gujarat
11 Heavy Chemicals Division, TPL 0.571 60,682 0.548
Manali Express Highway, Chennai-68
Tamil Nadu
12 ABCIL Renukoot Chemical Div. 0.347 96,637 0.324
(Kanoria Chemicals and Industries
Ltd.)
P.O. Renukoot , Sonebhadar
Uttar Pradesh
13 Lords Chloro Alkali Ltd. 0.450 45,329 0.412
SP-460, M.I.A., Alwar, 301030
Rajasthan
14 Meghmani Finechem Ltd. 0.967 61,796 0.902
CH-1, CH-2; Dahej Industrial Estate,
Vill: Dahej, Ta: Vagra, Dist: Bharuch,
392130
Gujarat
15 Punjab Alkalies & Chemicals Ltd. 0.319 88,959 0.299
Nangal Una Road, Naya Nangal,Dist.
Ropar, 140126
Punjab

(1) (2) (3) (4)
product) product)
16 Reliance Industries Ltd., 0.310 173,885 0.291
Manufacturing Division, Dahej,
Vagra, Bharuch, 392130
Gujarat
17 Shriram Alkali & Chemicals 0.990 112,135 0.922
749, GIDC Industrial Estate, Jhagadia,
Dist. Bharuch , 393110
Gujarat
18 SIEL Chemical Complex 0.305 75,833 0.287
Village Khadauli, Sardargarh, P.B.
No: 52, Rajpura, Dist. Patiala
Punjab
19 Sree Rayalseema Alkalies & Allied 0.333 116,716 0.312

Chemical Ltd.
Gondiparla, Kurnool
Andhra Pradesh
20 The Andhra Sugar Ltd , Chamical & 0.342 99,180 0.320
Fertilizer Division.
Saggonda, Gopalpuram Mandel,
W.G., 534318
Andhra Pradesh
21 Travancore Cochin Chemicals Ltd. 0.299 50,430 0.282
Udyogamandal, Kochi, 683501
Kerala
22 United Phosphorus Ltd. 0.286 58,333 0.271
750 G.I.D.C., P.B. No. 9, Jhagadia,
Bharuch, 393110
Gujarat
(iii) Textile
(1) (2) (3) (4)

consumption output consumption
(TOE/T of (Ton) (TOE/T of
product) product)
1. Aarti International Ltd. 0.403 25605 0.386
Village Uchi Mangli, P.O. Ramgadh,
CHD road Ludhiana
Punjab
2. Abhishek Industries Ltd (Home 0.223 27650 0.219
Textiles)
Mansa road, Vill-Dhaula, Dist-
Barnala
Punjab
3. Abhishek Industries Ltd. (Yarn 0.204 41377 0.200
Division)
Raikot Road Barnala, 148101
Punjab
4. AK Spintex Ltd 0.697 9633 0.659
14th km stone, Chittorgarh Road,
Bhilwara
Rajasthan
5. Alok Industry VAPI (Integrated 0.619 31961 0.584
Textile Solution)
Survey NO 254/261/268 Vill -Balitha,
PO-BOX NO 43, VAPI, 396191
Gujarat
6. Anant Spinning Mills (a Unit of 0.351 14355 0.338
Vardhman Textile Ltd.)
Plot no-1A, New Industrial area,
Mandideep, Dist- Raisen, 462046
Madhya Pradesh
7. Anant Syntex Limited 0.883 9098 0.821
PB no-107, Vill -Gathila Khera,
Chittor road, Bhilwara, 311001
Rajasthan

(1) (2) (3) (4)
product) product)
8. Arihant Spinning Mills 0.371 20743 0.357
P.B. no-21, Industrial Area, Mlerkotla,
148023
Punjab
9. Arisht Spinning Mills 0.440 16740 0.420
PB no-1, Sai road, Baddi, Nalagarh,
Dist-Solan, 173205
Himachal Pradesh
10. Aruppukottai Sri Jaya Vilas Ltd., 0.561 6826 0.529
Cotton Spinning Mills, ‘A’ Unit
Malakadamangalam, 626129
Tamil Nadu
11. Arvind Ltd. 2.954 17750 2.798
PO-Khatraj, Tal-Kalol, Dist-
Gandhinagar, 382721
Gujarat
12. Arvind Products Ltd. (Div. Ankur 1.791 3857 1.734
Textile)
Outside Raipur Gate, Ahmedabad,
380022
Gujarat
13. Auro Spinning Mills (A Unit of 0.484 12666 0.459
Vardhman Textiles Ltd.)
Sai road, Baddi, Nalagadh, Dist.
Solan, 173205
Himachal Pradesh
14. Banswara Syntex Ltd. 0.496 16359 0.478
Banswara
Rajasthan
15. Bharat Vijay Mill 1.108 6380 1.086
7- Garnala, Kalol Dist, Gandhinagar
Gujarat
(1) (2) (3) (4)
product) product)
16. Birla Cellulosic 1.080 76854 1.018
Birladam, Kharach, Kosamba(RS),
Bharuch, 394120
Gujarat
17. Birla Textile Mills (A Div. of Chambal 0.489 20175 0.464
Fertiliser & Chemicals Ltd.)
Sai road, Baddi, Dist-Solan, 173205
Himachal Pradesh
18. Bombay Rayon Fashions Ltd 2.298 6874 2.167
Doddaballa pura Area, Banglore
Karnataka
19. BSL LIMITED(Processing Division) 0.762 9446 0.716
PB no-16, Mandpum, Bhilwara,
311001
Rajasthan
20. BSL Limited 0.736 5058 0.697
PB no-17, Mandpum, Bhilwara,
311001
Rajasthan
21. BTM Industries Ltd. 0.811 6493 0.797
13 km stone, Vill-Pur, Gangapur
road, Bhilwara
Rajasthan
22. Century Enka Limited 1.055 22849 0.995
MIDC, Bhosari, Dist. Pune, 411026
Maharashtra
23. Century Rayon (A Div. of Century 0.0102 5982471 0.0101

Textiles & Ind. Ltd.)
PB No-22, Murbad Road, Shahad,
Dist. Thane, 421103
Maharashtra

(1) (2) (3) (4)
product) product)
24. Chamunda Synprocess (India) Pvt. 0.720 5137 0.679
Ltd.
Paldi-Arjia road, Vill- Govindpur,
Bhilwara, 311001
Rajasthan
25. DCM Textiles 0.290 14520 0.281
PB No-59, Near Mela ground, Hisar
Haryana
26. Deepak Spinners Ltd. 1.863 8328 1.778
121, Industrial area, Baddi, Dist.
Solan, 173205
Himachal Pradesh
27. Eurotex Industries and Exports 0.710 6346 0.658
Limited
Plot no-E 23, MIDC, Gokil Shirgaon,
Kolhapur, 416234
Maharashtra
28. G.P.I.Textiles Ltd. 0.349 20754 0.336
Bharatgarh road, Nalagarh, Dist.
Solan, 174101
Himachal Pradesh
29. Gokak Textile Limited 0.199 19981 0.195
Gokak mills Division, Gokak falls,
Dist-Belgaum, 591308
Karnataka
30. Indian Rayon (A unit of Aditya Birla 2.885 16795 2.720
Nuvo Ltd.)
Veraval, Dist. Junagadh, 362266
Gujarat
31. Indo Count Industries Limited 0.818 6155 0.752
D-1, MIDC, Gokil Shirgaon,
Kolhapur, 416234
Maharashtra
(1) (2) (3) (4)
product) product)
32. J. C. T. Limited Phagwara 4.577 6513 4.196
G.T. Road, Phagwara, 144401
Punjab
33. Janki Corp Limited 0.596 15230 0.568
Mandpiya Choraha, Chittor road,
Bhilwara
Rajasthan
34. Jawahar Shetkari Sahakari Soot Girni 0.346 10292 0.327
Ltd
Hutatma Shirishkumar nagar,
Morane pr.L, Dist -Dhule, 424001
Maharashtra
35. Kanchan India Ltd. 0.714 13212 0.674
Pur-road, Bhilwara
Rajasthan
36. Kumar Cotton Mills Pvt. Ltd. 5.220 2700 4.667
SI No-108/1, BD, Narol Court, Narol,
Ahmedabad, 382402
Gujarat
37. L.S.Mills Ltd., ‘B’ 0.658 5447 0.626
B unit, Cumbum road, Muthu
Thevandatty, Theni, Dist. Madurai
Tamil Nadu
38. Loyal Textile Mills Ltd. 0.395 14689 0.384
21/4 Mills Street, PB no-1, Kovilpatti,
628501
Tamil Nadu
39. M/s Grasim Bhiwani Textiles Ltd. 2.448 10946 2.341
Unit: Bhiwani Textile Mills & Elegant
Spinners
PB No-#4, BTM road, Bhiwani, 127021
Haryana

(1) (2) (3) (4)
product) product)
40. Mafatlal Industries Limited Textile 3.175 4824 3.039
Division, Nadiad Unit
PB No-#55, Kapadvanj Road, Nadiad,
387001
Gujarat
41. Maharaja Shree Umaid Mills Limited 0.646 24493 0.616
Pali marwar, 306401
Rajasthan
42. Malwa Cotton Spinning Mills Ltd 0.334 12397 0.323
Raikot road, Barnala, 148101
Punjab
43. Malwa Cotton Spinning Mills Ltd. 0.591 9178 0.555
Village-Patlian, Tehsil-Paonta Sahib,
Dist-Sirmour, 173025
Himachal Pradesh
44. Modern Terry Towel Ltd. 6.283 2502 5.738
PB No-6, Sanandkadi Road,
Ahmedabad
Gujarat
45. Morarjee Textiles Ltd 4.221 2932 3.883
Plot no-G-2, MIDC, Butibori, Post-
Salaidhaba, Nagpur, 441110
Maharashtra
46. Nahar Industrial Ent Ltd 0.270 12619 0.258
Vill- Jalalpur, PO-Dappar, Dist-
Mohali
Punjab
47. Nahar Industrial Enterprises Ltd. 0.481 18379 0.457
6th Mile stone, Tijara-Alwar road,
Bhiwadi, 301018
Rajasthan
(1) (2) (3) (4)
product) product)
48. Nahar Spinning Mills Ltd. 0.681 10220 0.634
Village-Simrai, Mandideep, Dist-
Raisen, 464992
Madhya Pradesh
49. Nitin Spinners Limited 1.349 23531 1.216
16-17 km stone, Chittor road,
Hamirgadh, Dist-Bhilwara, 311025
Rajasthan
50. Orient Syntex (Prop: APM Industries 0.788 13379 0.723
Ltd.)
SP-147, industrial area, Bhiwadi, Dist.
Alwar
Rajasthan
51. PBM Polytex Limited 0.743 6745 0.686
Opp Station, Petlad, Dist-Anand,
388450
Gujarat
52. Pee Vee Textiles Ltd. 0.272 20090 0.267
N.H. 07, Post-Jam, Tal- Samudrapur,
Dist-Wardha, 442305
Maharashtra
53. Priyadarshini Sahakari Sootgirni 0.301 19655 0.291
At-Tande, Shirpur-Chopara road,
Shirpur, Dist. Dhule, 425405
Maharashtra
54. RSWM Ltd Unit Mandpam 0.946 7128 0.852
PB no-13, Chittorgarh road,
Mandpum, Bhilwara, 311001
Rajasthan
55. Ranjan Processors (A Unit of Ranjan 0.651 10250 0.617
Polyster Ltd.)
11-12 km stone, Vill- Guwardi,
Chittor road, Bhilwara
Rajasthan

(1) (2) (3) (4)
product) product)
56. Rajasthan Textiles Mills 0.914 17439 0.830
Bhawani Mandi, Rajasthan 326 502
Rajasthan
57. Rankas Texfab Pvt. Ltd. (Bhairvnath 2.644 2406 2.504
Industries)
Survey No-145/A, Pipleg-purana
road, Piplej, Ahmedabad, 382405
Gujarat
58. Raymond Limited(Textile Division) 6.339 4317 5.977
B1, AKVN Growth Center, Kailash
nagar, Bore gaon Dist-Chhindwara
Madhya Pradesh
59. Raymond UCO Denim Pvt. Ltd 3.156 11954 2.977
Plot-C1, MIDC, Lohara, Yavatmal,
445001
Maharashtra
60. Raymond Zambaiti Limited 4.772 1247 4.360
Plot no-T1, Kagal Hatkanagle, 5
star, MIDC, Kasaba Sangaon, Dist-
Kolhapur, 416216
Maharashtra
61. Reliance Chemotex Industries Ltd. 0.572 8692 0.537
Vill-Kanpur, Udaipur, 313003
Rajasthan
62. Rishab Spinning Mills Jodhan (Prop. 0.329 18622 0.317
Nahar Spinning Mills Ltd.)
VPO-Jodhan, Dist. Ludhiana, 142029
Punjab
63. Rolex Processors Pvt. Ltd. 1.386 3857 1.348
13-14km stone, Vill-Pur, Gangapur
road, Bhilwara, 311802
Rajasthan
(1) (2) (3) (4)
product) product)
64. Ronak Processors (P) Ltd. 0.924 7047 0.856
G-138 to 142, 4th phase, Riico
industrial area, Bhilwara
Rajasthan
65. RSWM Limited, Ringas 0.533 7539 0.503
SP-1, industrial area, Ringas, 332404
Rajasthan
66. RSWM Ltd 0.598 20257 0.561
PB no-28, Kharigram, Gulabpura,
Bhilwara
Rajasthan
67. RSWM Ltd 0.865 14072 0.787
Rishabhdev, Udaipur Dist, 313802
Rajasthan
68. RSWM Ltd 2.175 2536 2.090
PB No-34, Vill-Lodha, Banswara,
327001
Rajasthan
69. RSWM LTD. (Fabric Div.) 1.688 2520 1.637
LNJ Nagar, Mordi, PB no-28, Dist-
Banswara, 327001
Rajasthan
70. Sangam (India) Ltd., (Processing, 0.908 10514 0.847
Flock & Weaving Division)
Outside Octroi post, Vill-Atun,
Chittorgarh road, Bhilwara, 311001
Rajasthan
71. Sanghi Spinners India Limited 0.402 11244 0.375
Post-Sanghi Nagar, Mandalhayath
Nagar, Ranga Reddy (Dist.), 501511
Andhra Pradesh

(1) (2) (3) (4)
product) product)
72. Sarvodaya India Limited (Formerly - 0.781 8907 0.733
Shree Charbhuja Processors Ltd.)
Plot no-A-44(45, 46, 57, 58, 59), Ricco
Growth Centre, Swaroopganj, Chittor
Rajasthan
73. Shri Ramalinga Mills Ltd. 0.460 12611 0.438
A unit, 212 Ramasamy Nagar,
Amppukottai, 626159
Tamil Nadu
74. Shriram Rayons 3.532 10218 3.330
Shriram Nagar, Kota, 324004
Rajasthan
75. Sona Processors I Ltd 0.672 10212 0.636
Indra colony, Police line, Chittor
Rajasthan
76. Spentex Industries Ltd. 0.210 17487 0.205
A-31, MIDC industrial area, Butibori,
Nagpur, 441122
Maharashtra
77. STI India Limited 4.194 15203 3.958
Rau pithampur link road, The Mhow
Dist-Indore, 453332
Madhya Pradesh
78. Sulzer Processors Pvt. Ltd. 0.693 8196 0.655
Opp-railway station, Mandal,
Bhilwara
Rajasthan
79. Surya Lakshmi Cotton Mills Ltd 2.937 3809 2.820
Village-Nagardhan, Tal. Ramtek,
Dist. Nagpur
Maharashtra
(1) (2) (3) (4)
product) product)
80. Swastika Suitings Ltd 0.770 6190 0.723
7-14 industrial area, Pur road,
Bhilwara
Rajasthan
81. The Bombay Dyeing & 1.287 7280 1.253
Manufacturing Co. Ltd.
B-28, 5 star, MIDC, Ranjangaon, Tal.
Shirur, Dist.Pune, 412220
Maharashtra
82. The Bombay Dyeing & Mfg. Co. Ltd. 0.202 126560 0.191
Plot no-1, Industrial area, MIDC,
Patalganga, Tal. Khalapur, Dist.
Raigad, 410220
Maharashtra
83. TPL Industries Limited 11/12 km, 0.592 8901 0.564
Chittor road, Guwardi, Bhilwara,
311001
Rajasthan
84. Valli Textile Mills 0.293 14292 0.287
A unit of Loyal Textile Mills Ltd.,
N.Venkateshwara Puram, Post-
Sathur, 626205
Tamil Nadu
85. Vardhman Fabrics (Unit of 3.222 18940 3.036
Vardhman Textiles Limited)
Vill-Plikarar Talpura Rehti road,
Tehsil-Budhni, Dist. Sehore, 466441
Madhya Pradesh
86. Vardhman Spinning & General Mills 0.396 22081 0.384
Chandigarh road, Ludhiana, 141011
Punjab

(1) (2) (3) (4)
product) product)
87. Vardhman Yarn 2.235 16090 2.097
Plot No-A1-A6, New industrial area,
Phase 2, Satalapur (Mandideep), Dist-
Raisen, 462046
Madhya Pradesh
88. Vardhman Yarns & Threads Ltd-Unit 0.683 6535 0.634
-1
PB no-18, Phagwara road,
Hoshiarpur , 146001
Punjab
89. Winsome Textile Industries Ltd 0.394 10846 0.377
1-industrial area, Sai road, Baddi, Dist
Solan, 173205
Himachal Pradesh
90. Winsome Yarns Ltd 0.432 11401 0.413
Village- Kurawala, Barawal Road,
Dist-Mohali
Punjab
(iv) Pulp& Paper
(1) (2) (3) (4)

product) product)
1 BILT Graphic Paper Products Ltd, 0.215 176365 0.203
Village BhadalwadiBhigwan, Tal -
Indapur, Dist-Pune, Pin-413105
Maharashtra
2 ITC Limited-PSPD 0.457 434504 0.443
UnitBhadrachalam,
Andhra Pradesh
(1) (2) (3) (4)
product) product)
3 Tamil Nadu News Print and Papers 0.572 248461 0.550
Limited
Kagithapuram, Gram Newsprint,
Dist- Karur, Pin-639136
Tamil Nadu
4 Century Pulp and Paper 0.591 258965 0.568
Ghansyamdham, Lalkua, Dist.
Nainital, Pin-262402
Uttarakhand
5 JK Paper Ltd 0.601 96110 0.577
Unit: CPM, PO Central Pulp Mills,
Fort Songadh, Dist-Tapi, Pin-394660
Gujarat
6 BILT Graphic Paper Products Ltd. 0.609 137090 0.584
P.O. Ballarpur Paper Mills., Dist-
Chandrapur, Pin-442901
Maharashtra
7 Star Paper Mills Limited 0.636 70755 0.609
B.D. Bajoria Road, Saharanpur, Pin-
247001
Uttar Pradesh
8 The Andhra Pradesh Paper Mills 0.655 94096 0.627
Limited
Unit APPM, Rajahmundry, Pin-
533105
Andhra Pradesh
9 The West Coast Paper Mills Ltd. 0.218 172404 0.215
P.B. No. 5, Bangur Nagar, Dandeli,
Pin-581325
Karnataka
10 Seshasayee Paper and Boards Limited 0.684 120693 0.652
Pallipalayam, Erode, Pin-638007
Tamil Nadu

(1) (2) (3) (4)
product) product)
11 JK Paper Mills 0.736 134891 0.700
At/PO: Jaykaypur, Rayagada, Pin-
765017
Odisha
12 Ballarpur Industries Ltd. 0.924 71627 0.867
Unit Sewa, Gagnapur, Jeypore
(RS),Dist. Koraput, Pin- 764002
Odisha
13 Mysore Paper Mills Ltd. 0.934 103205 0.875
Paper Town Post Bhadravati – 577302
Karnataka
14 Ballarpur Industries Ltd. 0.960 81454 0.898
Unit: Shree Gopal -BILT,
Yamunanagar, Pin-135001
Haryana
15 Nagaon Paper Mill 1.037 110487 0.966
PO: Kagajnagar Jagiroad, Pin-782413
Assam
16 Cachar Paper Mill 1.129 73982 1.044
P. O. Panchgram, Dist-Hailakandi,
Pin-788802
Assam
17 The Sirpur Paper Mills Limited 1.209 91712 1.112
Kaghaznagar, Adilabad, Pin-504296
Andhra Pradesh
18 Orient Paper Mill 1.329 64783 1.211
P.O. Amlai Paper Mill, Dist. Shahdol,
Pin-484117
Madhya Pradesh
19 ITC Ltd. 1.570 25149 1.482
Tribeni
West Bengal
(1) (2) (3) (4)
product) product)
20 Hindustan Newsprint Limited 0.660 108221 0.623
Kottayam
Kerala
21 Emami Paper Mills Limited 0.555 103931 0.528
Balgopalpur, Post-Rasulpur, Balasore,
Pin-756020
Odisha
22 Rama Newsprint and Papers Ltd., 0.616 123273 0.584
Village Barbodhan, Taluka Olpad,
Dist- Surat, Pin-395005
Gujarat
23 NEPA Limited 0.861 41522 0.797
Nepanagar, Dist. Burhanpur, Pin-
450221
Madhya Pradesh
24 ITC Ltd. , Kovai 0.348 89085 0.341
Thekkampatty Village,
Mettupalayam, Coimbatore, Pin-
641113
Tamil Nadu
25 Shree Bhawani Paper Mills Limited 1.402 20852 1.293
Industrial Area One, Sultanpur Road,
RaiBareili, Pin-229010
Uttar Pradesh
26 ABC Paper Ltd. 0.498 55039 0.481
Village Sailakhurd , Dist- Hoshiarpur
Punjab
27 Sukhumbari Straw Products Ltd. 0.518 74321 0.500
32 KM, Chanduasi Road, Village-
Devri, Dist- Moradabasd, Pin-
Uttar Pradesh

(1) (2) (3) (4)
product) product)
28 Shree Shyam Pulp & Board Mills Ltd 0.557 53994 0.536
5th KM Store, Moradabad Road,
Kashipur, L.S. Nagar
Uttrakhand
29 Delta Paper Mills Ltd. 0.735 28175 0.698
Vendra, Palakoderu Mandal, West
Godavari Dist, Pin-534210
Andhra Pradesh
30 Abhisek Industries Ltd. 1.058 86367 0.981
Mansa Road, Dhaula, Barnala
Punjab
31 Satia Paper Mills Ltd. 0.942 54929 0.881
Muktsar-Malout Road, Village-
Rupana, Muktsar, Pin-152026
Punjab
(v) Iron &Steel
(1) (2) (3) (4)

product) product)
1 Essar Steel Ltd. 0.590 3428667 0.558
27 KM, Surat- Hazira Road, Hazira
Gujarat
2 Rashtriya Ispat Nigam Ltd 0.605 3289000 0.571
Vizag
Andra Pradesh
3 SAIL Rourkela Steel Plant 0.629 2100914 0.592
Rourkela
Odisha
(1) (2) (3) (4)
product) product)
4 SAIL, Bokaro Steel Plant 0.643 3766642 0.605
Ispat Bhawan, Bokaro steel city
Jharkhand
5 Bhilai Steel Ltd 0.632 5116000 0.595
Bhilai
Chhattisgarh
6 Tata Steel Limited 0.646 5741167 0.607
Bistupur, Jamshedpur
Jharkhand
7 Durgapur Steel Plant 0.663 1905000 0.623
Durgapur, Burdwan
West Bengal
8 JSW 0.663 2610000 0.622
Nagpur
Maharashtra
9 Jindal Steel & Power Limited 0.724 1653775 0.676
Post Box No. 16, Kharsia Road,
Raigarh
Chhattisgarh
10 SAIL, Burdwan 0.818 424935 0.757
Burnpur near Asansol, Dist-Burdwan,
West Bengal
11 Tata Sponge Iron Limited 0.581 359333 0.551
P.O. Joda, Dist- Keonjher
Odisha
12 Hare Krishna Metallics Ltd. 0.589 81271 0.557
Plot No.20, Kashan kandi road,
Village & Post Hirebaganal
Karnataka
13 Gopani Iron & Power Pvt Ltd. 0.626 86820 0.590
A-22 MIDC Growth Centre, Tadali,
Chandrapur
Maharashtra

(1) (2) (3) (4)
product) product)
14 Sree Mataliks Ltd. 0.642 125761 0.604
Loidapada, PO. Guali, Barbil, Dist.
Keonijhar
Odisha
15 Shraddha Ispat Pvt. Ltd. 0.676 68292 0.634
Survey NO. 53/1, Village- Santona,
Taluka-Sanguem
Goa
16 Hospet Ispat Pvt Ltd 0.763 52792 0.710
Sy No. 2 Allanagar, Bagnal Road,
Dist-Koppla.
Karnataka
17 Ambey Metallic Ltd. 0.845 27357 0.779
Plot No. 69-75, 143-160 Pissurlem
Industrial Estate Pissurlem, City-
Sattari
Goa
18 Rashmi Sponge Iron & Power Ltd. 0.915 26114 0.838
90, Phase 2, Siltara Industrial, Grouth
Center, Siltara, Raipur
Chhattisgarh
19 Welspun Maxsteel Ltd. 0.167 579529 0.158
Salav, Raigarh
Chhattisgarh
20 API Ispat & Powertech (Pvt.) Limited 0.763 64916 0.710
Near Industrial Growth Cente,
Siltara, Raipur
Chhattisgarh
21 S.K.Sarawagi & Corp.Pvt Ltd 0.560 54005 0.533
Plot No-38/41, Vill-Sankra, Phase-II,
Siltara Industries area, Raipur
Chhattisgarh
(1) (2) (3) (4)
product) product)
22 Welspun Steels Ltd. 0.592 134450 0.562
Welspun City, Survey No.650/652,
Village-Versamedi TA-Anjar (Kutch)
Gujarat
23 BMM Ispat Ltd. 0.637 176186 0.602
114, Danapur Village, Hospet Taluk,
Dist-Bellary
Karnataka
24 Monnet ISPAT & Energy Ltd. 0.693 316508 0.652
Monnet Marg Mandir, Hasoud,
Raipur
Chhattisgarh
25 Anjani Steel Ltd. 0.704 104391 0.662
Athagarh, Cuttack
Odisha
26 Top Worth Iron & Steel Pvt Ltd. 0.736 111420 0.691
Borai Industrial Growth Centre,
Village Rasmada, Durg
Chhattisgarh
27 Crest Steel & Power Pvt Ltd 0.739 74208 0.693
Village:Joratari, post:Mangatta,
Dist:Rajnandgaon
Chhattisgarh
28 Goa Sponge & Power ltd. 0.750 100126 0.703
Survey No. 58/59/60, village Santona
Goa
29 Gallent Metal Limited 0.752 147899 0.704
Near Toll Gate, Village - Samakhyali,
Taluka - Bhachau, Kutch
Gujarat
30 Nalwa Steel & Power Ltd 0.775 220856 0.724
Gharghoda Road, Taraimal, Raigarh
Chhattisgarh

(1) (2) (3) (4)
product) product)
31 Singhal Enterprises Pvt. Ltd. 0.779 199519 0.728
Raigarh, Gerwani, Tharaimal,
Raigarh
Chhattisgarh
32 Godavari Power & Ispat Ltd 0.666 326850 0.633
Plot No. 428/2, Phase - I, Industrial
Area, Siltara, Raipur
Chhattisgarh
33 Shri Bajaran Power & Ispat Ltd. 0.858 99734 0.803
Village Borjhara, Urla - Guma Road,
Raipur
Chhattisgarh
34 Vandana Global Ltd. 0.982 127680 0.909
Siltara Industrial Growth Center,
Phase II, Siltara, Raipur
Chhattisgarh
35 Hira Power & Steel Ltd. 0.870 38130 0.836
Urla Industrial Complex, Raipur
Chhattisgarh
36 JSL Stainless Steel Ltd. 1.037 86937 0.989
KNIC , Raipur Road
Odisha
37 Hira Ferro Alloy Ltd. 1.290 35025 1.215
Plot nos. 567 B, 568 & 553 B, Urla
industrial Complex, Raipur
Chhattisgarh
38 MSP Steel & Power ltd. 1.861 23256 1.706
Raigarh,
chhattisgarh
39 Shyam Century Ferrous (A Division 1.907 19344 1.743
of Century Plyboards (I) Ltd.)
Dist- Ribhoi, Meghalaya
Meghalaya
(1) (2) (3) (4)
product) product)
40 Indian Metal & Ferro Alloys 0.766 133673 0.725
P.O.KaliaPani, Sukinda, Jajpur
Odisha
41 Navabharat Ventures Ltd. 1.140 30640 1.050
Khadagprasad Meramandali Rly
Station, Dist:-Dhenkanal
Odisha
42 Balasore Alloys Limited 0.326 83936 0.306
Balgopalpur, Balasore
Odisha
43 Sunflag Iron & Steel Co. Ltd 0.235 797322 0.226
Bhandara Road, Nagpur
Maharashtra
44 Neelachal ISPAT Nigam Limited 0.297 2873603 0.283
Kalinga Nagar Industrial Complex,
Duburi, Jajpur
Odisha
45 ISPAT Industries Ltd. 0.469 249000 0.446
Gitapuram, Dis-Raigadh
Maharashtra
46 Jayaswal Neco Industries Ltd. 0.502 501713 0.461
Siltara Growth Centre, Siltara, Raipur
Chhattisgarh
47 JSW Ltd. 0.0527 624860 0.0511
Vasind
Maharashtra
48 VISA Steel Ltd. 0.551 694534 0.501
Kalinganagar Industrial complex
Odisha
49 Action ISPAT & power Pvt. 0.597 103318 0.567
Jharsuguda
Odisha

(1) (2) (3) (4)
product) product)
50 Bhushan Steel Ltd. 0.058 860712 0.056
Raigarh
Maharashtra
51 Bhushan Steel Limited. 0.056 1022056 0.054
23, Site-iv, Sahibabad
Uttar pradesh
52 Lloyds Steel Industries Ltd. 0.103 726460 0.100
Lloydsnagar, Bhugaon Link Road,
Wardha
Maharashtra
53 Welspun Corp ltd. 0.103 630800 0.100
Welspun City, Survey No.665,
Village-Versamedi TA-Anjar (Kutch)
Gujarat
54 ISPAT Industries Ltd. 0.119 547300 0.116
Kalmeshwer, Nagpur
Maharashtra
55 SMC Power Generation Ltd. 0.539 105094 0.512
Hirma, Jharsuguda
Odisha
56 Satyam Iron & Steel Pvt. Ltd. 0.663 47193 0.623
G-7, Mangalpur Industrial Area,
Raniganj Burdwan
West Bengal
57 Mahendra Sponge & power Ltd. 0.670 47856 0.632
Siltara , Raipur
Chhattisgarh
58 Jai Balaji Industries Ltd. 0.629 91364 0.595
Barai Industrial Growth Centre, PO-
Rasmada Dist. Durg
Chhattisgarh
(1) (2) (3) (4)
product) product)
59 Hariyana steel and power Ltd 0.738 45544 0.688
Kanchanahalli, Sathenahalli Post,
Shantugrana Hobli, Hassan TQ.
Karnataka
60 Aarti Steels Pvt. Ltd. 0.790 145758 0.743
Ghantikhal, PO:Mahakalabasta, Via-
Athagarh, Dist:Cuttack
Odisha
61 Usha Martin Limited 0.238 624301 0.229
PO.147, Jamshedpur, Phase V,
Aditya Indutrial Area, Gamharia,
Dist:Saraikela
Jharkhand
62 M/S Mukund Ltd. 0.079 406934 0.077
Thane- Belapur road, Dighe Kalwa
Maharashtra
63 Orrisa Sponge Iron & Steel limtied 0.685 119441 0.645
P.o : Palaspanga, DIST : Keonjhar
Odisha
64 SKS ISPAT & Power Limited 0.981 183667 0.932
Village:Siltara, Raipur
Chhasttisgarh
65 Adhunik Metaliks Limited 0.764 290533 0.741
Chadrihariharpur, Dist Sundergarh
Odisha
66 Visvesvaraya Iron and Steel Plant 1.187 136000 1.132
Bhadravathi, Shimoga
Karnataka
67 Llyods metals & Energy Limited 0.609 184742 0.575
Plot No. A 1-2, , M I D C Area,
Ghugus; Chandrapur
Maharashtra

(vi) Fertilizer
(1) (2) (3) (4)

product) product)
1 BVFCL, Namrup-II 1.689 72992 1.487
Brahmaputra Valley Fertilizers
Corporation Limited ,Namrup,
P.O- Parbatpur, Distt-Dibrugarh
Pin Code – 786623
Assam
2 BVFCL, Namrup-III 1.154 203702 1.016
Brahmaputra Valley Fertilizers
Corporation Limited ,Namrup, P.O-
Parbatpur, Distt- Dibrugarh
Pin Code – 786623
Assam
3 NFL , Panipat 0.758 504297 0.576

National Fertilizers Limited ,
Gohana Road, Panipat,
Pin Code – 132106
Haryana
4 NFL, Bhatinda 0.714 521225 0.557
National Fertilizers Limited,
Sibian Road, Bathinda,
PinCode -151003.
Punjab
5 NFL ,Nangal 0.704 489008 0.528
National Fertilizers Limited,
Naya Nangal, Distt. Ropar , Pincode
-140126.
Punjab
6 GNFC ,Bharuch 0.545 621418 0.490
Gujarat Narmada Valley
Fertilizer Company Limited ,P.O.
Narmadanagar, District Bharuch Pin
Code - 392015
Gujarat
(1) (2) (3) (4)
product) product)
7 RCF, Thal 0.391 1839342 0.366
Rashtriya Chemicals & Fertilizers Ltd.
(Thal Unit), Tal Alibag, Dist Raigad
-Pin Code -402208
Maharashtra
8 KRIBHCO Hazira 0.340 1754549 0.323
Krishak Bharati Cooperative Ltd,
P.O. KRIBHCO NAGAR, Dist Surat ,
Pin Code- 394515,
Gujarat
9 NFL, Vijaipur - I 0.328 881318 0.319
National fertilizers Ltd, Vijaipur
Dist: Guna , Pin code: 473111
Madhya Pradesh
10 NFL, Vijaipur - II 0.298 918058 0.295
National fertilizers Ltd, Vijaipur
Dist: Guna, Pin code: 473111
Madhya Pradesh
11 RCF, Trombay -V 0.497 306905 0.487
Rashtriya Chemicals & Fertilizers
Ltd.,(Trombay). Mahul Road
Chembur, Mumbai ,Pin Code: 400074
Maharashtra
12 SFC, Kota 0.512 385728 0.507

Shriram Fertilizers & Chemicals, Kota
Plant, Shriram Nagar,
Kota - 324 004
Rajasthan
13 IFFCO Phulpur - I 0.428 671636 0.423
Indian Farmers Fertilizer Co-
Operative Limited , Phulpur P.O
Ghiyanagar, Dist. Allahabad ,Pin
Code – 212404
Uttar Pradesh

(1) (2) (3) (4)
product) product)
14 GSFC Baroda 0.399 294602 0.395
Gujarat State Fertilizer Corporation
,P.O. Narmada nagar District,
Bharuch,
Pin Code - 392015
Gujarat
15 MFL , Manali 0.532 427517 0.520
Madras Fertilizers Limited ,Ennore
Express Highway ,Manali, Chennai
Pin Code – 600068
Tamil Nadu
16 ZIL Goa 0.435 398578 0.425
Zuari Industries Limited
Jai Kisen Bhawan , Zuari Nagar,Goa
,Pin Code :403 726
Goa
17 MCFL Mangalore 0.420 379667 0.410
Mangalore Chemicals & Fertilizers
Ltd ,
Panambur, mangalore ,PinCode
-575010
Karnataka
18 IFFCO Phulpur - II 0.328 921630 0.325
Operative Limited , Phulpur P.O
Ghiyanagar, Dist. Allahabad ,Pin
Code – 212404
Uttar Pradesh
19 NFCL Kakinada - II 0.312 643638 0.309
Nagarjuna Fertilizers & Chemicals
Ltd ,
Nagarjuna Road, Kakinada East
Godavari District Pin Code – 533003
Andhra Pradesh
(1) (2) (3) (4)
product) product)
20 CFCL, Gadepan - I 0.312 977947 0.309
Chambal Fertlizers and Chemicals
Ltd.
P.O :Gadepan , Dist. Kota, Pin Code:
325208
Rajasthan
21 NFCL Kakinada - I 0.303 761280 0.300
Nagarjuna Fertilizers & Chemicals
Ltd ,
Nagarjuna Road, Kakinada East
Godavari District Pin Code – 533003
Andhra Pradesh
22 IFFCO, Aonla - II 0.300 1002626 0.297
Operative IFFCO Aonla unit,
P.O IFFCO Township , Bareilly Pin
Code - 243403
Uttar Pradesh
23 CFCL Gadepan -II 0.299 1005027 0.296
Chambal Fertilizers and Chemicals
Ltd.
Gadepan , Dist. Kota, Pin Code:
325208, Rajasthan
24 TCL, Babrala 0.268 1107238 0.265
Tata Chemicals Ltd,Babrala
Indira Dham, Babrala Dist -Budaun ,
Pin Code - 242021, Uttar Pradesh
25 IFFCO Aonla - I 0.317 954258 0.314
Operative Ltd IFFCO Aonla unit
P.O IFFCO Township , Bareilly Pin
Code – 243403
Uttar Pradesh

(1) (2) (3) (4)
product) product)
26 IGFCL, Jagdishpur 0.294 1016129 0.291
Indo Gulf Fertilizers , Jagdishpur
Industrial Area, Sultanpur, Pin Code
-227817
Uttar Pradesh
27 Kribhco Shyam 0.323 915095 0.320
Krbhco Shyam Fertilizer Limited ,
Village & Post Office :
Piprola, Shahjahanpur , Pin Code -
242001
Uttar Pradesh
28 IFFCO Kalol 0.337 568187 0.333
Indian Farmers Fertilizer Co-op Ltd
Kalol Unit, P.O.Kasturinagar, Dist
Ghandhinagar, Pin code – 382423.
North Gujarat
Gujarat
Major Product Ammonia
29 FACT Udyogmandal 0.985 137004 0.970
(Ammonia )*
The Fertilizers and Chemicals
Travancore Limited ,Udyogamandal
divison ,Udyogamandal, Pin Code -
683501
Kerala
(vii) Cement
(1) (2) (3) (4)
Name, Address and State Specific energy Equivalent Specific energy

consumption Major consumption
(TOE/ton of Product (TOE/ton of
product) Output (tons) product)
Major Product Portland Pozolona Cement (PPC) Plants

1. Ambuja cement ltd., Suli 0.0712 3820641.73 0.0684
P.O. Darlaghat Tehsil Arki Distt.
Solan-171102
Himachal Pradesh
2. Lafarge India Pvt. Ltd (Sonadih Cement 0.0721 2463398.65 0.0692
Plant)
PO - Raseda, Via - Balodabazar, Dist -
Raipur, Pin - 493332
Chhattisgarh
3. Lafarge India Pvt.ltd (Arasmeta cement 0.0722 2533507.82 0.0693
Plant)
Gopalnagar, Dist:-Janjgir Champa
Chhattisgarh
4. Ultratech Cement Limited, Hirmi 0.0725 3780724.90 0.0695
Cement Works
P.O. Hirmi-493195 Distt. Raipur
Chhattisgarh
5. Ultratech Cement ltd (Reddipalyam 0.0746 1480812.84 0.0715
Cement Works)
P.O. Reddipalyam Dist.-
Ariyalur-621704
Tamil Nadu
6. Ultratech Cement Ltd. (Rawan cement 0.0747 2339088.36 0.0716
Works)
Grasim Vihar Vill. Po. Rawan Tehsil
Sigma Dist. Raipur-493196
Chhattisgarh
7. The India Cements Ltd., Dalavoi 0.0753 1709858.56 0.0722
Cement nagar-621 730, Sendurai (t.k.),
ariyalur (d.t)
Tamil Nadu

(1) (2) (3) (4)

8. Ultratech Cement ltd. (Vikram cement 0.0755 4939800.15 0.0723

Works)
P.O. Khor-458470 Distt.- Neemuch
Madhya Pradesh
9. Chettinad Cement Corporation Ltd., 0.0756 1662268.02 0.0724
Dindigul
Rani Meyammai Nagar, Karikkali
Post,Guziliamparai (VIA),Dindigul
Distt.PIN:624703
Tamil Nadu
10. Maihar Cement_Unit-II, Satna 0.0768 2027853.30 0.0735
Post-Sarlangar Maihar Dist- satna
Madhya Pradesh
11. Prism cement Works, Satna 0.0783 3363293.63 0.0749

Vill. Mankahari Tehsil- Rampur
bghelan Satna 485111
Madhya Pradesh
12. Jaypee Bela Plant, Rewa 0.0785 3525291.63 0.0750
P.o. Jaypeenagar Distt. Rewa
Madhya Pradesh
13. ACC Ltd. (Gagal Cement Works -I) 0.0788 2109124.09 0.0753
P.O.Barmana, Distt Bilaspur, Pin –
174013
Himachal Pradesh
14. ACC Ltd. (Gagal Cement Works -II) 0.0796 2310003.56 0.0760
P.O.Barmana, Distt Bilaspur, Pin –
174013
Himachal Pradesh
15. Jaypee Rewa Plant , Rewa 0.0800 4492400.00 0.0764
P.o. Jaypeenagar Distt. Rewa
Madhya Pradesh
(1) (2) (3) (4)

16. The India Cements Limited, 0.0803 1784532.49 0.0767

Sankarnagar
Sankarnagar-627 357, Tirunelveli
District, Tamil Nadu
17. Chettinad Cement Corporation Ltd., 0.0803 1257603.02 0.0767
Puliyur
Kumara rajah Muthiah Nagar, Puliyur,
C.F., Karur District,
Pin: 639114.
Tamil Nadu
18. Dalmia Cement (Bharat) Ltd, Trichy 0.0812 3668817.90 0.0775

Dalmiapuram-621651 Trichy Distt.
Tamil Nadu
19. Shree Cement Ltd. Beawar 0.0813 4508726.04 0.0776
Bangur Nagar, PostBox NO.33, Beawar,
Distt.Ajmer
Rajasthan
20. Kalyanpur Cement Ltd, Bihar 0.0821 604895.52 0.0783
P.O. Banjari Dist. - Rohtas- 821303
Bihar
21. Madras Cements Ltd (Alathiyur Work) 0.0835 3195018.66 0.0796
Alathiyur Work, Cement Nagar,
Sendurai Taluk, Ariyalur, Pondichery,
Chennai - 621730
Tamil Nadu
22. ACC Ltd. (Kymore Cement Ltd.) 0.0850 4591973.50 0.0810

P.O. Kaymore Tehsil-Vijraghavegarh
Distt. Katni -483 880
Madhya Pradesh

(1) (2) (3) (4)

23. Penna Cement Industries Ltd. 0.0852 1291097.78 0.0811

Nalgonda
Vill. Ganeshpahad Post:-Wadapally,
Distt. Nalgonda
Andhra Pradesh
24. Ultratech Cements Ltd (Awarpur 0.0856 3991608.15 0.0815
Cement Works)
P.O. Awarpur Cement Project, Taluka:
Korpana, Dist. Chandrapur – 442917
Maharashtra
25. Ambuja Cement Ltd. Ambujanagar 0.0856 5466373.46 0.0815

P.O Ambujanagar, Tal-Kodinar, Dist-
Junagadh, Pin-362715
Gujarat
26. Ambuja Cement Ltd (Maratha Cement 0.0857 3388848.57 0.0816

Works)
Village: Upparwahi, Taluka: Korpana,
Distt: Chandrapur – 442908
Maharashtra
27. Ambuja Cement Ltd, (Bhatapara 0.0862 2022309.11 0.0821
Cement Works)
P.O. Rawan Tehsil Baloda Bazar Dist.-
Raipur
Chhattisgarh
28. The India Cements Ltd, Vishnupuram 0.0867 2786769.58 0.0825
Vishnupuram, wadapally post, Distt.-
Nalgonda -508355
Andhra Pradesh
29. The India Cements Ltd., Sankari 0.0873 672185.45 0.0830

SANKARI WEST, SALEM - 637 303,
Tamil Nadu
(1) (2) (3) (4)

30. Birla Cement Ltd. Chittorgarh 0.0873 987678.68 0.0831

Sector-3, Madhav Nagar, PO: Cement
Factory, CHANDERIA - 312021 DISTT.
: CHITTORGARH
Rajasthan
31. JK Lakshmi Cement Ltd., Sirohi 0.0877 4481291.93 0.0834
P.o. Jaykaypuram distt. Sirohi
Rajasthan
32. Orient Cement, Devapur 0.0881 3098834.09 0.0837
Devapur Dist. Adilabad- 504218
Andhra Pradesh
33. Meghalaya Cements Ltd. 0.0884 650752.70 0.0840
Thangskai Village P.O. Lumshnong
Distt. Jaintia Hills-793 200
Meghalaya
34. Chanderia cement Ltd., Chittorgarh 0.0890 1731405.89 0.0845
Sector-3, Madhav Nagar, PO : Cement
Factory, CHANDERIA - 312021 DISTT.
: CHITTORGARH
Rajasthan
35. Rain Cement limited Unit-1, Nalgonda 0.0891 1189273.89 0.0847
Ramapuram village Mellacheruvu
Mandal Nalgonda Distt.
Andhra Pradesh
36. JK Cement limited, Nimbahera 0.0892 3305505.26 0.0847
Kailash Nagar-I Nimbahera Distt.
Chittorgarh, Rajasthan
Rajasthan
37. Birla Corporation Ltd. (Satna Cement 0.0892 2841472.57 0.0848
Works)
P.O. Birla Vikas, Distt.- Satna , Madhya
Pradesh

(1) (2) (3) (4)

38. Ambuja Cement Ltd. Rabriyawas 0.0893 2916130.15 0.0848

Teh: Jaitaran, Dist: Pali- 306709
Rajasthan
39. Ultratech Cement Ltd. (Aditya Cement 0.0896 4160666.96 0.0851
Works)
Adityapuram Sawa – Shambhupura
Road Dist. Chittorgarh- 312613
Rajasthan
40. ACC ltd. (Chanda Cement Works) 0.0898 1188494.71 0.0852
PO. Cementnagar Dist Chandurpur
442502
Maharashtra
41. Shree Cement Ltd. Ras 0.0903 5424050.18 0.0857
Bangur City RAS, Tehsil Jaitaran-
306107,Dist: Pali
Rajasthan
42. Zuari Cement Ltd. , Nalgonda 0.0910 1444263.42 0.0863
Sitapuram Works Donadapadu
Nalgonda Distt.
Andhra Pradesh
43. Century Cement , Baikunth 0.0911 1917933.92 0.0865
Baikunth, Dist. Raipur-493116,
Chhattisgarh
44. ACC Ltd. ( Wadi Cement Works) 0.0922 5205902.19 0.0874
Wadi Pin:-585225 Distt.-Gulbarga
Karnataka
45. Maihar cement Unit-1, Satana 0.0929 1916033.55 0.0880
Post-sarlangar maihar Dist- satna
Madhya Pradesh
46. Mangalam Cement Ltd., Kota 0.0957 1918625.63 0.0906
P.O. Aditya nagar (Morak) Distt. Kota,
Rajasthan
(1) (2) (3) (4)

47. ACC Ltd (Lakheri Cement works) 0.0971 1210539.37 0.0918

P.O.Lakheri Dist.- Bundi -323 603
Rajasthan
48. Manikgarh Cement, Chandrapur 0.0975 1881976.30 0.0921
Post-Gadchandur Tah.-Korpana Dist-
Chandrapur
Maharashtra
49. Ultratech Cement ltd. (Kotputli cement 0.0993 1643937.72 0.0937
Works)
V & P. O. Mohanpura, Tehsil:
KotputliDist. Jaipur, PIN 303108,
Rajasthan
50. The India Cements Ltd Yerraguntla 0.1015 737750.02 0.0958
Yerraguntla Works, Yerraguntla -516309
Andhra Pradesh
51. Dalla Cement Factory (Unit of 0.1016 1883873.66 0.0958

Jaiprakash Associates Limited)
S.H. 5 kota P.O. Dalla Distt.Sonebhadra
Uttar Pradesh
52. Kesoram Cement (Prop. Kesoram 0.1042 1521847.95 0.0981

Industries Ltd.,)
Basantnagar P.O., Dist. Karimnagar,
Andhra Pradesh
53. Andhra cement Ltd., Guntur 0.1111 901739.38 0.1042
Durgapuram, Dachepalli Guntur Distt.
522414
Andhra Pradesh
54. Malabar Cement Ltd. Palakkad 0.1121 520817.52 0.1050
Walayar, Palakkad, Kerala - 678 624
Kerala

(1) (2) (3) (4)

55. Panyam Cements & Minerals Industries 0.1227 570431.10 0.1143

Ltd
Cement Nagar, Distt. Kunool-518206,
Andhra Pradesh
Major Product Ordinary Portland Cement (OPC) Plants
56. The K C P Ltd., Cement unit- Macherla 0.0965 749537.31 0.0924

Macherla-522426, Dist. Guntur
Andhra Pradesh
57. Binani Cement Ltd., Sirohi 0.0986 4097795.92 0.0943
Binanigram tehsil-Pindwara Distt-
Sirohi-307031
Rajasthan
58. Ultratech Cement Ltd (Gujrat Cement 0.0988 5551353.17 0.0945
Ltd.)
Village: Kovaya, Taluka: Rajula City,
Dist. Amreli- 365 541
Gujarat
59. Ultra Tech Cement Ltd (Naramada 0.1011 1618506.94 0.0966
Cement)
P.B.no-10,babarkot Village, Pin code:
365540,Dist:Amreli
Gujarat
60. My Home Industries Ltd., Nalgonda 0.1036 2510059.37 0.0989
Mellacheruvu-508246 Nalgonda Distt.
Andhra Pradesh
61. The India Cement Ltd., Malkapur 0.1066 1432509.58 0.1016
Works
SY No.-51, Malkapur Village Malkapur
Post, Tandur, Ranga reddy Distt. -
501157
Andhra Pradesh
(1) (2) (3) (4)

62. Ultratech Cement Ltd (Rajshree Cement 0.1091 4243556.66 0.1039

Works)
Adityanagar Malkhed Road-585292,
Dist.- Gulbarga
Karnataka
63. Vasavadatta Cement, Gulbaraga 0.1099 3730929.49 0.1046
Sedam-585222 Gulbaraga Distt.
Karnataka
64. Penna Cement Industries Limited, 0.1101 1260383.26 0.1047
Boyareddypalli
Boyareddypalli, Yadiki Mandal,
Anantapur Distrtic, Pincode : 515408,
Andhra Pradesh
65. Shree Digvijay Cement Co. Limited, 0.1127 948758.12 0.1072

Jamnagar
PO. Digvijaygram, Sikka Dist.
Jamnagar,
Gujarat
66. Gujarat Sidhee cement Ltd., Junagarh 0.1160 1324531.90 0.1101
Sidheegram Veraval-Kodinar Highway
dist. Junagarh
Gujarat
67. The India Cement Ltd. Chilamkur 0.1179 1222181.05 0.1118
Chilamkur Post, Kadapa Dist-516310
Andhra Pradesh
68. Rain cement Ltd Unit-II, Kurnool 0.1190 979298.65 0.1128
Sreepuram,Boinchervupally
(V),Peapully (M),Kurnool Dist-518220
Andhra Pradesh
69. Tata Chemicals Limited, Mithapur 0.1319 418043.72 0.1242
Mithapur-361345, Dist: Jamanagar,
Gujarat

(1) (2) (3) (4)

70. Saurashtra Cement Ltd, Ranavav 0.1319 1433187.48 0.1243

Near Railway Station, RANAVAV -
360560 , Dist - PORBANDAR
Gujarat
71. Sanghi Industries Ltd., Kutch 0.1368 2315329.96 0.1286
PO.Sanghipuram, TA-Abdasa Dist-
Kutch , Gujarat
Major Product Portland Slag Cement (PSC) Plants
72. OCL India Ltd, Odisha 0.0700 2345958.15 0.0674
P.O: Rajgangpur, Dist: Sundergarh, Pin:
770017
Odisha
73. ACC Ltd (Chaibasa) 0.0794 2225051.76 0.0761
Chaibasa Jinkpani Dist Singhbhoom-833
215
Jharkhand
74. Ultratech Cement ltd ( AP Cement 0.0802 4623915.47 0.0768
Works)
Bhogasamudram-
515415,Tadipatri,Anantapur Distt,
Andhra Pradesh
75. Penna Cement Industries Ltd., 0.0859 1792310.65 0.0820
Anantpur
Talaricheruvu mandal anantpur
Andhra Pradesh
76. ACC Ltd (Bargarh Cement Works) 0.0881 1355911.77 0.0840
Cement Nagar, PO- Bardol, Dist.
Bargarh - 768038
Odisha
77. ACC Ltd (Jamul Cement Works) 0.0936 1411921.77 0.0890
P.O. Jamul Cement Works District Durg
Pin- 490 024
Chhattisgarh
(1) (2) (3) (4)

78. Heidelberg Cement India Ltd, Tumkur 0.0968 423298.95 0.0918

PO:Ammasandra.Tq:Turuvekere.
Dt:Tumkur.
Karnataka
White Cement Plants
79. JK white Cement, Nagaur 0.1452 307926.48 0.1379
PO.Gotan-342902 Dist.- Nagaur
Rajasthan
80. Ultratech Cement Ltd., Unit- Birla White 0.1485 458535.33 0.1409
D-7 Shastri Nagar Jodhpur-342003
Rajasthan
Wet Cement Plants
81. ACC Ltd. (Madukkari Cement Works) 0.1241 975013.08 0.1181
P.O.Madukkari Dist.Coimbatore
Tamil Nadu
82. DCM Shriram Consolidated Ltd, Kota 0.1245 392571.99 0.1184
Shriram nagar Distt. Kota
Rajasthan
Only Grinding Plants
83. ACC Ltd. Tikaria Cement Works 0.0139 2532930.21 0.0133
PO- Gauriganj District -Chhatrapati
Shahuji Maharaj Nagar,
Uttar Pradesh
84. Ambuja Cement Limited, Ropar 0.0201 2800401.57 0.0189
Vill.-Doburji P.O. Lodhimajra Distt.
Ropar -140113
Punjab
Only Clinkerization Plant
85. Diamond Cement Prop. Heidelberg 0.1257 1222000.00 0.1193
Cement, Damoh
Village Narsingarh Dist.-Damoh
Madhya Pradesh

(viii) Thermal Power Plant
S. Designated consumer Baseline energy Energy Consumption

No. consumption norms & norms & standards in
standards in kcal per unit of kcal per unit of net
net electricity produced for electricity produced
the baseline year (average of for the target year.
three years).
(1) (2) (3) (4)

Name, Address and State Net Heat Net Product Net Heat Rate
Rate (Kcal/ Output (Kcal/KWH)
KWh) (Million Units)
1 Gas Turbine Power Station 1936 1560 1931
Andhra Pradesh Gas Power
Corporation Ltd. Vijjeswaram
Andhra Pradesh
2 GMR Vemagiri Power 1774 2917 1774
Generation Limited,
Rajamundry
Vemagir Vill, Kadiyam Mandal,
East Godawari Dist.-533125
Andhra Pradesh
3 Kothagudam Thermal Power 2973 4370 2935
Station (Combined, 720 MW)
Paloncha, Khammam Dist -
507115
Andhra Pradesh
4 Kothagudam Thermal Power 2565 3502 2556
Station Stage V (500 MW)
Paloncha, Khammam Dist -
507115
Andhra Pradesh
5 Lanco Kondapalli Power Private 2007 2409 1988
Limited
Ida Kondapalli, Ibrahim
Patanam, Krishna Dist. - 521228
Andhra Pradesh
(1) (2) (3) (4)
6 NTPC Ltd. Ramagundam Super 2520 19990 2498
Thermal Power Station
P.O. Jyothi nagar, Dist. Karim
Nagar-505215
Andhra Pradesh
7 NTPC-Simhadri 2490 7820 2468
Vishakhapatanam-531020
Andhra Pradesh
8 Ramagundam Thermal Power 2885 446 2885
Station Ramagundam
Dist. Karim Nagar - 505208
Andhra Pradesh
9 Rayalaseema Thermal Power 2529 5804 2522
Project
V.V. Reddy nagar, Kadapa Dist.
- 516312
Andhra Pradesh
10 Reliance Smalakot Thermal 2106 1213 2080
Power Station
IDA Peddapuram, Samalkot
Andhra Pradesh
11 Spectrum Power Generation 2123 1452 2117
Ltd., East Godavari
Uppada beach Road, Kakinada
-533448
Andhra Pradesh
12 Vijaywada (Dr. Narla Tata Rao) 2571 9074 2566
Thermal Power Station
Ibrahimpatnam, Krishna Dist. -
521456
Andhra Pradesh
13 Kathalguri Gas Based Power 2683 1714 2561
Plant , NEEPCO
AGBP, NEEPCO Ltd, Bokuloni
Chariali, Dibrugarh - 786191
Assam

(1) (2) (3) (4)
14 Lakwa Thermal Power Station 4279 615 4237
Maibella, P.O. Suffry,
Sivasagar-785689
Assam
15 Namrup Thermal Power 3808 550 3759
Station, APGCL
P.O. NTPS , Namrup
Dibrugarh-786622
Assam
16 Barauni Thermal Power Plant 5134 732 4618
Begusarai
Bihar
17 NTPC Ltd- Kahalgaon 2614 8225 2605
P.O. Kahalgaon, STPS,
Bhagalpur-813214
Bihar
18 ACB (India) TPPs Pvt Ltd. 4181 183 4143
Chakabura, Korba
Chhattisgarh
19 Dr. Shyamaprasad Mukharjee 2738 3488 2671

Thermal Power Station Korba
CSPGCL, Korba (East)
Korba-495677
Chhattisgarh
20 Hasdeo Thermal Power Station 2871 5751 2802
Korba ( West)
CSPGCL, Korba West, Darri,
Korba-495450
Chhattisgarh
21 Jindal Power Limited, Tamnar 2526 7486 2518
O.P. Jindal Super Thermal
Power Plant, P.O. Tamnar,
Tahsil Tamnar, Raigarh-496107
Chhattisgarh
(1) (2) (3) (4)
22 Korba (East) Thermal Power 3334 2773 3199
Station
Korba East , Dist. Korba - 495677
Chhattisgarh
23 NTPC Ltd-Korba 2526 16722 2515
Vikas Bhawan, Jamnipali, Korba
- 495450
Chhattisgarh
24 NTPC Ltd-Sipat 2491 5877 2484
P.O. Ujjwal Nagar, Dist.
Bilaspur-495555
Chhattisgarh
25 NTPC SAIL Power Co. Pvt. Ltd. 2741 3178 2704
(500 MW)
Joint Venture of NTPC & SAIL,
Purena , Bhilai East-490021
Chhattisgarh
26 R R Energy Ltd., Raigarh 4084 105 3985
NH-200, Jharsuguda Road,
Near KIT College, Garhumaria,
Raigarh-496001
Chhattisgarh
27 Indraprastha Gas Turbine 2815 1308 2649
Power Station
Indraprasth Power Generation
Co. Ltd, IP Estate, Ring road ,
New Delhi-110002
Delhi
28 NTPC Ltd-Badarpur 2988 4897 2942
Badarpur, New Delhi, 110044
Delhi
29 Pragati Power Station - 1 2068 2352 2061
IP Estate, Ring Road, New
Delhi-110002
Delhi

(1) (2) (3) (4)
30 Rajghat Power House 4011 696 3766

(Indraprastha Power Generation
Company Ltd.)
Rajghat Power House , Ring
Road, New Delhi-110002
Delhi
31 Goa Power Station (Reliance 2136 2104

Infrastructure Limited)
Opposite Sancoal Industrial
Estate, Zuari Nagar.
Goa
32 Akrimota Thermal Power 3376 3237

Station, Kutch
Nani Chher, Tal. Lakhapat,
Kutch-370602
Gujarat
33 Dhuvaran CCPP , Anand 2183 2096

Ta-Khambhat, Dist. Anand
Gujarat
34 Essar Power Ltd, Hazira 2072 2063

27 Km, Surat-Hazira Road,
Surat-394270
Gujarat
35 Gandhinagar Thermal Power 3016 2929

Station (Gujarat State Electricity
Corp. Ltd )
Gandhi Nagar
Gujarat
36 Gujurat Paguthan Energy Co. 2010 2004

Pvt ltd., Bharuch
Vill Paguthan, Bharuch Palej
Road, Bharuch-392015
Gujarat
(1) (2) (3) (4)
37 Kutch (Lignite) Thermal Power 4096 3996

Station, Gujarat State Electricity
Corp. Ltd.
SKV Nagar, Taluka Lakhpat,
Dist. Kutch-370601
Gujarat
38 NTPC Ltd - Jhanor Gandhar, 2075 2072

Bharuch
P.O. Urja Nagar, Dist.
Bharuch-392215
Gujarat
39 NTPC Ltd - Kawas , Surat 2070 2062

P.O. Aditya Nagar, Kawas,
Surat-394516
Gujarat
40 Sabarmati Thermal Power 3103 3027

Station
Torrent Power Ltd,
Ahmedabad-380005
Gujarat
41 Sikka Thermal Power Station, 3450 3277

Jamnagar (Gujarat State
Electricity Corporation Ltd.)
GSECL, Sikka, Dist.
Jamnagar-361141
Gujarat
42 Surat Combined Cycle Power 2071 2049

Station, Gujarat State Electricity
Generation (GSEC)
Vill. Mora, P.O. Bhatha, Surat
Hazira Road, Surat-394510
Gujarat

(1) (2) (3) (4)
43 Surat Lignite Power Plant 2898 2866
(Gujarat Industries Power
Company Ltd.), Surat
GIPCL, Nani Naroli, Tk.
Mangrol, Dist. Surat-394110
Gujarat
44 UKAI Thermal Power Station 3050 2953
GSECL, Vidyut Bhawan,
Racecource, Vadodara - 390007
Gujarat
45 Utran Gas Based Power Station 2303 2298
(Gujarat State Electricity Corp.)
GSECL, Utran-390007
Gujarat
46 Vadodara Gas Power Station, 2173 2166
(Gujurat Industries Power
Company Ltd)
P.O. Petro Chemicals ,
Vadodara-391346
Gujarat
47 Vatva Combined Cycle Power 2163 2163
Plant, Torrent Power Ltd.
G.I.D.C. Phase IV,
Ahmedabad-382445
Gujarat
48 Wanakbori Thermal Power 2887 2820
Station , Kheda
Taluka Thasra, Dist.
Kheda-388239
Gujarat
49 NTPC Ltd - Faridabad 2001 1983
Tigaon Road, Vill Mujedhi,
Faridabad - 121004
Haryana
(1) (2) (3) (4)
50 Panipat Thermal Power Station - I 3060 2892
HPGCL, Assandh Road, Vill.
Assandh, Panipat-132105
Haryana
51 Yamuna Nagar Thermal Power 2878 2836
Station
Yamuna Nagar
Haryana
52 Bokaro Thermal Power Station, 3560 3180 3374
Damodar Valley Corporation
BTPS “B”, Bokaro Thermal, P.O.
Bokaro-829107
Jharkhand
53 Chandrapura Thermal Power 3188 2120 3038
Station , Damodar Valley
Corporation
Bokaro Dist.
Jharkhand
54 Jojobera Power Plant (TATA 2977 2649 2908
power Co.)
P.O. Rahargora,
Jamshedpur-831016
Jharkhand
55 Patratu Thermal Power Station 3534 992 3438
Hazaribagh
Jharkhand
56 Tenughat Thermal Power 2936 1850 2899
Station, TVNL
TVNL, Bokaro
Jharkhand
57 Bellary Thermal Power Station 3123 2694 2930
Kudathini, Bellary Dist. -583115
Karnataka

(1) (2) (3) (4)
58 Raichur Thermal Power Station 2807 9681 2743
(Karnataka Power Corp. Ltd.)
Shakti Nagar, Raichur-584170
Karnataka
59 Toranagallu Thermal Power 2422 2103 2420
Station ( JSW Energy Ltd.),
Bellary (600 MW)
Toranagallu, (P.O), Bellary
(Dist)-583123
Karnataka
60 Toranagallu Thermal Power 2515 2082 2503
Station (JSW Energy Limited)
(260 MW)
Toranagallu, (P.O), Bellary
(Dist)-583123
Karnataka
61 Yelahanka D. G. Power Plant, 2124 372 2079
Bangalore
S.N. Halliport - Doddaballapur
Road, Bangalore-560064
Karnataka
62 Brahmapuram DG Power Plant 2115 175 2074
KSEB, Kochi
Kerala
63 BSES Kerala Power Project 1969 590 1965
Udyogamandal, Kochi-683501
Kerala
64 Kasargod DG Power Plant 2265 69 2166
KPCL, Kasaragod
Kerala
65 Kozhikode Diesel Power Project 2150 350 2115
KSEB, Nallalam,
Kozhikode-673027
Kerala
(1) (2) (3) (4)
66 NTPC Ltd - Kayamkulam (Rajiv 1994 2016 1988
Gandhi Combined Cycle Power
Plant)
P.O. Choolatharuvu, Dist.
Alappuzha-690506
Kerala
67 Amarkantak Thermal Power 3498 1662 3354
Station, Chachai, (Phase II + III)
Chachai
Madhya Pradesh
68 NTPC Ltd -Vindhyachal 2532 24892 2521
Vindhya Nagar, Dist.
Singrauli-486885
Madhya Pradesh
69 Sanjay Gandhi Thermal Power 3402 7138 3192
Station
MPPGCL, Birsinghpur , Dist
Umaria-484552
Madhya Pradesh
70 Satpura Thermal Power Station 3681 6408 3444
MPPGCL, Sarni
Madhya Pradesh
71 Bhusawal Thermal Power 3218 2801 3107
Station, MAHAGENCO
Deep Nagar, Tah. Bhusawal,
Dist. Jalgaon-425307
Maharashtra
72 Chandrapur Super Thermal 2920 13942 2827
Power Station , MAHAGENCO
Urja Nagar, Chandrapur-442404
Maharashtra
73 Dahanu Thermal Power Station 2535 2523
Thane Dist- 401608
Maharashtra

(1) (2) (3) (4)
74 Khaperkheda Thermal Power 3016 2888
Station , MAHAGENCO
Khaperkheda, Tah. Saoner, Dist.
Nagpur -441102
Maharashtra
75 Koradi Thermal Power Station, 3600 3393
MAHAGENCO
Koradi, Tq. Kamti, Dist. Nagpur
Maharashtra
76 Nasik Thermal Power Station, 3215 3067
MAHAGENCO
Eklahare, Nasik-422105
Maharashtra
77 New Parli Thermal Power 3276 3098
Station, MAHAGENCO
Parli Vaijnath, Dist. Beed-431520
Maharashtra
78 Paras Thermal Power Station, 3346 3156
MAHAGENCO
Paras, Vidyut Nagar,
Paras(C.R.) Tq. Balapur, Dist.
Akola-444109
Maharashtra
79 Parli Thermal Power Station, 3346 3190
MAHAGENCO
Dist. Parli Vaijnath, Dist. Beed-
431520
Maharashtra
80 Trombay Combined Cycle 2107 2101
Power Plant(Tata Power
Company )
Chambur-400074
Maharashtra
(1) (2) (3) (4)
81 Trombay Thermal Power 2570 2547
Station (Coal & Oil ) (Tata
Power Company )
Chambur-400074
Maharashtra
82 Uran Gas Power Station, 2046 2038
Mahagenco
Raigarh-400702
Maharashtra
83 IB Thermal Power Station, 2708 2699
Orissa Power Gen. Co. Ltd
Jharsuguda-768234
Odisha
84 NTPC Ltd -Talcher Kaniha 2492 22389 2480
P.O. Deepsika, Angul-759147
Odisha
85 NTPC Ltd-Talcher Thermal , 3196 3259 3130
Angul
P.O. Talcher, Angul-759101
Odisha
86 Puducherry Gas Power Plant 2699 236 2697
(Puducherry Power Corporation
Ltd.)
Puducherry
Puducherry
87 Guru Gobind Singh Super 2922 9008 2830
Thermal Power Station, Ropar
Roop Nagar- 140113
Punjab
88 Guru Hargobind Thermal 2672 7033 2637
Power Plant, Lehra Mohabbat
Dist. Bathinda-151111
Punjab

(1) (2) (3) (4)
89 Guru Nanak Dev Thermal Plant, 3485 2532 3329
Bhatinda
Bhatinda
Punjab
90 Dholpur Combined Cycle 2184 2297 2184
Power Station
Dholpur-328001
Rajasthan
91 Giral Lignite Power Limited 4337 467 4058
Barmer-344001
Rajasthan
92 Kota Super Thermal Power 2862 9047 2830
Station
Kota- 324008
Rajasthan
93 NTPC Ltd - Anta 2091 2689 2081
Dist. Baran -325209
Rajasthan
94 Raj West Power Ltd. 3723 3612 3559
Barmer
Rajasthan
95 Ramgarh Gas Thermal Power 2886 334 2666
Plants
Jaisalmer
Rajasthan
96 Suratgarh Super Thermal Power 2740 8812 2687
Station
Sri Ganga Nagar-335804
Rajasthan
97 Basin Bridge Gas Turbine Power 3457 105 3379
Station
Chennai-600012
Tamil Nadu
(1) (2) (3) (4)
98 Ennore Thermal Power Station 3891 1563 3682
Chennai
Tamil Nadu
99 GMR Energy Ltd, Chennai 2047 1214 2047
Basin Bridge , Chennai -600012
Tamil Nadu
100 Kuttalam Gas Turbine Power 2170 450 2067
Station
Nagapattanam
Tamil Nadu
101 Lanco Tanjore Power Co.Ltd, 2127 777 2127
ABAN Power Co.Ltd
Karuppur, Thanjabur Dist.
Tamil Nadu
102 Madras Aluminum Company 3624 686 3470
Salem
Tamil Nadu
103 Madurai Power Corporation Pvt 2141 547 2141
Ltd.
Samayanallur, Madurai-625402
Tamil Nadu
104 Mettur Thermal Power Station, 2739 5982 2715
Salem
Tamil Nadu
105 Neyveli Thermal Power Station 2999 2858 2938
- I (Expansion)
Neyveli Lignite Corp.,
Neyveli-600007
Tamil Nadu
106 Neyveli Thermal Power Station 4453 3335 4131
1
Neyveli Cuddalore
Tamil Nadu

(1) (2) (3) (4)
107 Neyveli Thermal Power Station- 2 3222 9069 3148
Neyveli Cuddalore
Tamil Nadu
108 North Chennai Thermal Power 2696 4332 2684
Station
TNEB, Chennai-600120
Tamil Nadu
109 Pioneer Power Ltd. (Penna 2514 332 2477
Electricity Ltd)
Valantharavai, Ramnad Dist.
623536
Tamil Nadu
110 PPN Power Generating Co. Ltd. 1879 2176 1857
Chennai
Tamil Nadu
111 Samalpatti Power Company Pvt 2124 563 2124
Ltd., Krishnagiri
Krishnagiri Dist, -635206
Tamil Nadu
112 ST-CMS Electric Company Pvt. 2963 1660 2939
Ltd.
Uthanjal, Cuddalor Dist. 607804
Tamil Nadu
113 TCP Limited 3598 464 3487
Chennai
Tamil Nadu
114 Thirumakottai (Kovil Kalapal) 2216 599 2113
Gas Turbine Power Station,
Mannargudi-614017
Tamil Nadu
115 Tuticorin Thermal Power 2777 7050 2738
Station
Tuticorin
Tamil Nadu
(1) (2) (3) (4)
116 Valuthur Gas Turbine Power 2144 625 2058
Station
Ramanathapuram, -623536
Tamil Nadu
117 Agartala Gas Turbine Power 3788 648 3707
Plant, NEEPCO
NEEPCO, Agartala-799008
Tripura
118 Baramura Gas Thermal Power 3639 162 3631
Plant, Baramura
Teliamura, West Tripura-799205
Tripura
119 Rokhia Gas Thermal Power 3892 418 3852
Plant, Rokhia
Rokhia, Sonamura-799102
Tripura
120 Anpara Thermal Power Station, 2643 10579 2640
Sonebhadra
Sonebhadra Dist.
Uttar Pradesh
121 Harduaganj Thermal Power 4585 611 4247
Station
Kasimpur , Aligarh-202127
Uttar Pradesh
122 NTPC Ltd - Auraiya 2190 4017 2163
Dist. Auraiya-206244
Uttar Pradesh
123 NTPC Ltd - Dadri Gas 2037 5243 2031
GB Nagar Dist-201008
Uttar Pradesh
124 NTPC Ltd - Dadri Coal 2580 6903 2558
GB Nagar Dist-201008
Uttar Pradesh

(1) (2) (3) (4)
125 NTPC Ltd -Rihand 2512 15752 2491
P.O. Rihand Nagar,
Sonebhadra-231223
Uttar Pradesh
126 NTPC Ltd- Singrauli 2577 14949 2568
P.O. Shakti Nagar,
Sonebhadra-231222
Uttar Pradesh
127 NTPC Ltd -Tanda 3083 3114 3051
Dist. Ambedkar Nagar-224238
Uttar Pradesh
128 NTPC Ltd- Unchahar (Feroze 2596 8152 2586
Gandhi Thermal Power Project),
Raibareli
Raibareli-229406
Uttar Pradesh
129 OBRA Thermal Power Station 3731 4466 3601
Obra, Sonebhadra-231219
Uttar Pradesh
130 Panki Thermal Power Station 3710 1057 3557
Kanpur
Uttar Pradesh
131 Parichha Thermal Power Station 3046 3305 2969
Jhansi
Uttar Pradesh
132 Bakreswar Thermal Power 2974 4253 2873
Station
Birbhum-731104
West Bengal
133 Bandel Thermal Power Station 3731 2006 3503
Tribeni, Hoogly.
West Bengal
(1) (2) (3) (4)
134 Budge Budge Thermal Power 2669 4095 2644
Station
South 24 Parganas
West Bengal
135 Durgapur Thermal Power Plant 3317 2582 3214
( Durgapur Projects Ltd)
Durgapur
West Bengal
136 Durgapur Thermal Power 3278 1677 3134
Station , Damodar Valley Corp.
Ltd.
Durgapur
West Bengal
137 Kolaghat Thermal Power 3246 6632 3105
Station, WBPDCL
Salt Lake City, Kolkata-700098
West Bengal
138 Mejia Thermal Power Station , 2781 6163 2739
Damodar Valley Corporation
Durlavpur, Bankura Distt.
West Bengal
139 New Cossipore Thermal Power 3818 353 3743
Sattion
New Cossipore
West Bengal
140 NTPC Ltd -Farakka 2596 10144 2574
Murshidabad Dist
West Bengal
141 Sagardighi Thermal Power 3584 2912 3465
Station
Murshidabad Dist
West Bengal

(1) (2) (3) (4)
142 Santaldih Thermal Power 3768 1292 3600
Station
Dist. Purulia-723146
West Bengal
143 Southern Replacement Thermal 3154 1003 3057
Power Station
C.E.S.C. Ltd. Kolkata
West Bengal
144 Titagarh Thermal Power Station 3182 1729 3145
North 24 Parganas
West Bengal
The designated consumers referred to in column (2) of the sector table above shall comply with
the energy consumption norms and standards specified against their name in column 4 of the
said Sector Table by the target year 2014-15.
[F. No. 10/6/2008-EC]

JYOTI ARORA, Jt. Secy.
9. Annexure 2: PAT Rules

Ministry of Power
Notification
New Delhi, the 30th March, 2012
G.S.R. 269(E).- In exercise of the powers conferred by clauses (f),(g), (k), (la)and (laa) of section
56, read with clauses (g) and (o) of section 14, sub-section (1) of section14Aand section 14B of the
Energy Conservation Act, 2001 (52 of 2001), the Central Government hereby makes the following
rules, namely:-
1. Short title and commencement.- (1) These rules may be called the Energy Conservation
(Energy Consumption Norms and Standards for Designated Consumers, Form, Time
within which, and Manner of Preparation and Implementation of Scheme, Procedure for
Issue of Energy Savings Certificate and Value of Per Metric Ton of Oil Equivalent of Energy
Consumed) Rules, 2012.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Definitions.-(1) In these rules, unless the context otherwise requires, -
(a) “Act” means the Energy Conservation Act, 2001;
(b) “baseline year” means the year in which the base level of energy consumption is
used as a reference point for establishment and assessment of performance with
regard to compliance of energy consumption norms and standards under rule 4
and rule 6 respectively;
(c) “certification” means the process of certifying the verification report or check-
verification report by the accredited energy auditor to the effect that the
entitlement or requirement of energy savings certificate is quantified accurately
in relation to compliance of energy consumption norms and standards by the
designated consumer during the target year;
(d) “check-verification” means an independent review and ex-post determination

by the Bureau throughthe accredited energy auditor, of the energy consumption
norms and standards achieved in any year of the three year cycle which have
resulted from activities undertaken by the designated consumer with regard to
compliance of the energy consumption norms and standards;
(e) “cycle” means the period of three years available to a designated consumer to
comply with the energy consumption norms and standards;
(f) “energyconsumption norms and standards” means the specific energy

consumption of the designated consumerfor the specified year notified under
clause (g) of section 14;
(g) “Form” means the form annexed to these rules;
(h) “Rules 2007” means the Energy Conservation (the form and manner for
submission of report on the status of energy consumption by the designated
consumers) Rules, 2007 notified in the Official Gazette vide number G.S.R 174
(E), dated the 2nd March,2007;
(i) “Rules 2008” means the Energy Conservation (Form and Manner and Time for
Furnishing Information With Regard to Energy Consumed and Action Taken
on Recommendations of Accredited Energy Auditor) Rules, 2008 notified in the
Official Gazette vide number G.S.R 486(E), dated the 26th June,2008;
(j) “Schedule” means the Schedule annexed to these rules;
(k) “section” means a section of the Act;
(l) “specific energy consumption” means the ratio of the net energy input into the
designated consumers’ boundary to the total quantity of output exported from
the designated consumers’ boundary, calculated as per the following formula:-

specific energy consumption =
net energy input into the designated consumers’ boundary

total quantity of output exported from the designated consumers’ boundary
and expressed in terms of the metric ton of oil equivalent (toe)/per unit of product;
(m) “targetyear” means the year by which a designated consumer shall achieve
compliance with the energy consumption norms and standards;.
(n) “verification” means a thorough and independent evaluation by the accredited

energy auditor of the activities undertaken by the designated consumer for
compliance with the energy consumption norms and standards in the target
year compared to the energy consumption norms and standards in the baseline
year and consequent entitlement or requirement of energy savings certificate;
(o) “year” means the financial year beginning on the 1st day of April and ending on
the 31st day of March following.
(2) Words and expressions used herein and not defined but defined in the Act shall have
the meanings respectively assigned to them in the Act.
3. Establishment of energy consumption norms and standards.-(1)The Central Government,

in consultation with the Bureau, shall establish, amend or rescind the energy consumption
norms and standards for designated consumers as notified under clause (g) of section 14.
(2) The energy consumption norms and standards shall be specific for every designated
consumer and shall be determined as under:-
(a) where energy audit of the designated consumer’ plant has been completed,
energy saving measures and action plan for their implementation has been
finalised in consultation with the energy manager of the plant under regulations
4 and 5 of the Bureau of Energy Efficiency (Manner and Intervals of Time for
Conduct of Energy Audit) Regulations, 2010,the energy consumption norms and
standards shall be based on the timely submission of Form 2 and Form 3 under
Rules 2008;
(b) where energy audit of the designated consumers’ plant has not been completed
or undertaken, the energy consumption norms and standards shall be
determined taking into account the following factors, namely:-
(i) average rate of reduction in specific energy consumption across all the
designated consumer sectors’ determined on the basis of the analysis of
data of the last three years;
(ii) policy objectives of keeping the target of reducing the specific energy
consumption a few percentage points above the average rate of reduction
keeping in view the incentive provided through the issue of energy
savings certificate.
(3) Where the energy consumption norms and standards have been determined in
accordance with clause (a) or clause (b) of sub-rule (2),the said methodology shall not
be reviewed after the commencement of the energy consumption norms and standard
notified under clause (g) of section 14.
(4) The designated consumers shall achieve compliance with the energy consumption
norms and standards as notified under clause (g) of section 14 within a period of three
years from the date of commencement of the said notification.
4. Procedure for establishment of energy consumption norms and standards.-(1)For the

purpose of establishment of energy consumption norms and standards, the technical
committee set up by the Bureau shall-
(a) calculate specific energy consumption in the baseline year and projected specific
energy consumption in the target year covering different forms of net energy
going into the boundary of the designated consumers’ plant and the products
leaving it over the relevant cycle on a gate-to-gate basis;
(b) in calculating the net energy input to the plant,-
(i) convert the calorific values of all forms of energy sources into a single
unit, namely, ton of oil equivalent using the conversion formulae specified
in the Government of India, Ministry of Power notification number
S.O.394(E), dated the 12th March, 2007;
(ii) consider all forms of energy that is, electricity, solid fuel, liquid fuel,
gaseous fuel, or any other form of energy imported into the plant for
consumption as energy for production of output;
(iii) not take into account energy consumed in the colony attached to the plant,
temporary or major construction work, and for outside transportation
system or energy consumed through renewable energy sources not
connected to the grid;
(iv) take into account the energy exported out of the designated consumers’
boundary;
(v) if any designated consumers’ plant does not have disaggregated figures
for energy consumed, consider the net energy consumed for calculation
both in baseline year and in the target year:
Provided that the said designated consumer shall give adequate reasons that
it was not feasible to make adjustment for energy consumed in the colony,
temporary or major construction work:

Provided further that such designated consumer shall make necessary
arrangements for disaggregation of data for energy consumption to ensure that
actual energy consumed for production is considered in the next cycle;
(vi) where more than one product is produced, select the main product
produced or an equivalent product worked out from the product mix as
per standard practice prevalent in the concerned designated consumers
sector:
Provided that where the production of the said main product is stopped, the
designated consumer shall inform the necessary details in that regard to the
Bureau and the concerned state designated agency;
(c) calculate the specific energy consumption for the baseline year as well as for
the target year and normalise it by taking into account the capacity utilisation,
mix of grid and captive electricity, and any other factor which affects energy
consumption as specified in the Schedule;
(d) calculate the annual specific energy consumption in the baseline year by
verifying the data in the previous three years, year-wise, using the data
submitted by the designated consumers’ under Rules 2007 and if verified, under
Rules 2008;
(e) calculate the effect of capacity utilisation and other factors if any, on the specific
energy consumption for the previous three years;
(f) calculate the specific energy consumption, production, capacity utilisation, in

the baseline year by taking the average of the previous three years in the first
cycle and for subsequent cycles, the provisions of rule 14shall apply;
(g) take into consideration the effect on capacity utilisation or the plant load factor
or average energy consumption in the target year on account of any of the
following factors, namely:-
(i) natural disaster; or
(ii) rioting or social unrest; or
(iii) major change in the Government policy including environmental

standards; or
(iv) impact of market (shortage of raw material or sales) in any of the previous
three years.
(2) The said technical committee shall prepare a report containing designated consumer-
specific basis of methodology referred to in sub-rule 2 of rule 3, consultation with the
designated consumers, and submit the said report to the Bureau.
(3) The Bureau shall examine the report submitted under sub-rule (2) and finalise its
report containing its recommendation regarding the energy consumption norms and
standards for each designated consumers’ plant.
(4) The details regarding methodology used, formulae adopted, exceptions considered,
principles adopted, for preparation of energy consumption norms and standards shall
be as specified in the Schedule.
(5) The Bureau shall submit the report referred to in sub-rule (3) to the Central
Government.
(6) The Central Government after considering the said report shall by notification,-
(a) establish and specify the energy consumption norms and standards for every
designated consumers’ plant under clause (g) of section 14;
(b) give direction to all designated consumers for compliance with the energy
consumption norms and standards under clause (n) of section 14and inform the
Bureau and all the State designated agencies.
5. Form, manner and time for preparation of scheme for implementation of efficient use of
energy and its conservation.-(1) Every designated consumer, within three months of the
issue of notification under sub-rule (6) of rule 4 shall submit a scheme to State designated
agency with a copy to Bureau, which may include -
(a) action plan containing inter-alia, a brief description of identified energy saving
measures to comply energy consumption norms and standards by the target year;
(b) the estimated cost of each identified energy saving measures;
(c) implementation plan to achieve energy consumption norms and standards through
implementation of energy saving measures or through purchase of energy savings
certificates.
6. Assessment of performance.-(1) Every designated consumer, within three months of the

conclusion of the target year from the baseline year shall submit to the State designated
agency, with a copy to the Bureau, the performance assessment document in Form ‘A’
covering the performance for the relevant cycle specifying the compliance with energy
consumption norms and standards, duly verified together with certificate in Form ‘B’ given
by the accredited energy auditor and accompanied by the following documents, namely:-
(a) copy of unique number of registration given to the designated consumer;
(b) proof of timely submission of reports in Form 1 under Rules 2007 for the
previous three years;
(c) proof of timely submission of reports in Form 1, Form II and Form III under
Rules 2008 along with copies thereof including the reports for the target year;

(d) details of energy savings measures implemented for compliance with the energy
consumption norms and standards in Form II and Form III of Rules 2008, for
each year, covering the relevant cycle enclosing therewith, a brief about the
year-wise energy savings measures, details of investment made, photographs
in support of measures implemented in each year, if feasible, and percentage
improvement in energy savings achieved in every year following the baseline
year until the target year;
(e) details of energy consumption norms and standards of the designated

consumers in the baseline year, achievement made in every year following
the baseline year and upto the target year together with the opinion of the
accredited energy auditor on the achievement of energy consumption norms
and standards, entitlement or requirement of energy savings certificates along
with the details of calculation and correctness of entitlement or requirement
duly certified by the accredited energy auditor;
(f) name and particulars of the energy manager, his date of appointment, details
of duties performed including initiatives undertaken for improvement in energy
conservation and energy efficiency.
(2) The designated consumer, within three months after the end of first or second year
of the relevant cycle, may submit performance assessment document in Form ‘A’ to
the State designated agency, with a copy to the Bureau, for issuance of proportionate
energy savings certificates covering the performance for a period of not less than
one year from the date of notification specifying the energy consumption norms and
standards, duly verified together with certificate in Form ‘B’ given by accredited
energy auditor along with the documents mentioned in sub-rule (1).
(3) The accredited energy auditor shall independently evaluate each activity undertaken
by the designated consumer for compliance with the energy consumption norms and
standards and entitlement or requirement of energy savings certificate, to ensure that
they meet with the requirements of these rules.
(4) The accredited energy auditor, in order to assess the correctness of the information
provided by the designated consumer regarding the compliance with energy
consumption norms and standards shall-
(a) apply standard auditing techniques;
(b) follow the rules and regulation framed under the Act;
(c) integrate all aspects of verification, and certification functions;
(d) make independent technical review of the opinion and decision of the
verification team;
(e) also take into consideration, a situation where a particular activity may or
may not form part of the activities related to the compliance with the energy
consumption norms and standards, and the procedure for the assessment shall
include,-
(A) document review, involving-
(i) review of data and its source, and information to verify the correctness,
credibility and interpretation of presented information;
(ii) cross checks between information provided in the audit report and,
if comparable information is available from sources other than those
used in the audit report, the information from those other sources and
independent background investigation;
(B) follow up action, involving-
(i) site visits, interviews with personnel responsible in the designated

consumers’ plant;
(ii) cross-check of information provided by interviewed personnel to ensure

that no relevant information has been omitted or, over or under valued;
(iii) review of the application of formulae and calculations, and reporting of

the findings in the verification report.
(5) The accredited energy auditor shall report the results of his assessment in a
verification report and the said report shall contain,-
(a) the summary of the verification process, results of assessment and his opinion
along with the supporting documents;
(b) the details of verification activities carried out in order to arrive at the
conclusion and opinion, including the details captured during the verification
process and conclusion relating to compliance with energy consumption
norms and standards, increase or decrease in specific energy consumption with
reference to the specific energy consumption in the baseline year;
(c) the record of interaction, if any, between the accredited energy auditor and the
designated consumer as well as any change made in his assessment because of
the clarifications, if any, given by the designated consumer.
(6) If the accredited energy auditor records a positive opinion in his verification report,
the Bureau shall consider that all the requirements with regard to the compliance
with energy consumption norms and standards, entitlement about issue or liability to
purchase energy savings certificate have been met.

(7) After submission of duly verified Form ‘A’ by designated consumer, state designated
agency may convey its comments, if any, on Form ‘A’ to the Bureau within fifteen
days of the last date of submission of Form ‘A’.
7. Procedure for monitoring and verification.-(1) The designated consumer in consultation

with the accredited energy auditor, shall put in place transparent, independent and credible
monitoring and verification arrangements for energy consumption and production based
on the Bureau of Energy Efficiency (Manner and Intervals of Time for Conduct of Energy
Audit) Regulations, 2010 for compliance with the energy consumption norms and standard,
and the said arrangements shall include,-
(a) preparation and maintenance of quarterly data reports by the designated

consumers-
(i) on the performance of the plant and production processes;
(ii) on the internal field audits of plant and production processes for the
purpose of identification of factors inhibiting improvements in energy
efficiency and conservation, and taking of measures to reduce energy
consumption and to improve energy efficiency.
(b) preparation and maintenance of yearly data reports by the designated

consumers-
(i) on the performance of plant and production processes;
(ii) on the outcome of internal field audits of plant and production processes
identifying factors inhibiting improvements in energy efficiency and its
conservation, and taking of measures to reduce energy consumption and
improve energy efficiency and measures taken to improve the efficiency of
the production processes during each year;
(iii) regarding a year-wise report on production achieved, energy consumed,

and specific energy consumption achieved, specific energy consumption
reduction achieved, measures adopted for energy conservation and
quantity of energy saved;
(c) preparation and maintenance of the end of the cycle data reports on production
achieved, energy consumed, specific energy consumption achieved, specific
energy consumption reduction achieved, measures adopted for energy
conservation and quantity of energy saved.
(2) All the activities undertaken by the designated consumers under these rules shall
be scrutinised by the accredited energy auditor for the purpose of preparation of
verification report and the designated consumer shall furnish the full and complete
data, provide necessary documents and other facilities required by the accredited
energy auditor for the purpose of performing the function of verification under these
rules.
8. Check-verification.-(1) The Bureau may on its own, or on receipt of a complaint regarding

any error or inconsistency or misrepresentation, within one year from the date of
submission of the compliance report or within six months from the date of issue of energy
savings certificates, whichever is later, shall initiate action for review of compliance report
in accordance with the provision of sub-rule (2).
(2) The Bureau shall initiate action in accordance with the following procedure, namely-
(a) a notice shall be issued to the designated consumer as well as to the accredited
energy auditor who had submitted the verification report with a copy to
relevant state designated agency, to provide comments in reply to the said
notice within ten working days from the date of receipt of aforesaid notice;
(b) the comments furnished by the designated consumer and accredited energy
auditor shall clearly state that-
(i) they stand by the compliance report and verification report submitted
by them and submit a confirmation report giving point wise replies with
necessary documents in response to the said notice; or
(ii) they accept the errors or inconsistencies or misrepresentation pointed

out in the aforesaid notice and shall give detailed explanations in respect
of each point in the notice and work out the impact of such errors or
inconsistencies or misrepresentation on the submitted compliance report;
(c) within ten working days from the date of the receipt of the comments referred
to in clause (b),Bureau shall after taking into consideration the said comments,
decide to undertake or not to undertake review and the Bureau shall record the
reasons in writing for its decision;
(d) where the Bureau, in consultation with state designated agency, decides to
undertake review,
(i) it shall appoint an accredited energy auditor, who has not performed the
verification functions with respect to the concerned designated consumer,
to conduct the check-verification;
(ii) on a complaint, the said check-verification shall be carried out at the cost
of the complainant;
(e) where the Bureau decides not to undertake the said review, the designated
consumer, his accredited energy auditor, and the complainant shall be informed
in that regard in writing.

(3) The check-verification process shall involve assessment to ensure that, –
(a) the activities relating to the compliance with energy consumption norms and
standards have been performed and the issue or purchase of energy savings
certificate are in accordance with the provisions of these rules;
(b) the monitoring and verification process are in accordance with the provisions of
rule 6;
(c) the details of the data and the activities referred to in rule 7 are evaluated and
conclusion made that errors, omissions or misrepresentations or aggregation
thereof in the said data do not affect the energy consumption norms and
standards achieved by the activities and issue or purchase of energy savings
certificates by more than the threshold limit specified in the Schedule.
(4) The said accredited energy auditor shall assess and verify that the activities
performed by the designated consumer for compliance with the energy consumption
norms and standards are in accordance with these rules, and the assessment and
check-verification process shall involve–
(a) a review of the documents as well as the on-site assessment referred to

in rule 6to verify that the activities performed to comply with the energy
consumption norms and standards are in accordance with these rules and in
case the aforesaid accredited energy auditor decides that it was not possible or
appropriate to make a site visit, then he shall record reasons in writing in this
regard;
(b) a review of both quantitative and qualitative information on the energy

consumption norms and standards, the quantitative information comprising
of the reported data in ‘Form A’, and the qualitative information comprising
of information on internal management controls, calculation procedures,
procedures for transfer of data, frequency of energy consumption norms and
standards achieved every year following the baseline year until the target year,
reports and review of internal field audit of calculations or data transfers;
(c) a review of previous verification reports;
(d) a review of any other information and documents relevant to or having a

bearing on the activities performed under these rules;
(e) are view of the monitoring and verification process referred to in rule 7.
(5) The designated consumer shall furnish full and complete data, provide necessary
documents and other facilities required by the accredited energy auditor for the
purpose of performing the function of check-verification under these rules.
(6) The accredited energy auditor in-charge of check-verification function shall report
the results of his assessment in a check-verification report and the said report shall
contain,-
(a) the summary of the verification process, results of his assessment and his
opinion along with the supporting documents;
(b) the details of check-verification activities carried out in order to arrive at the
conclusion and opinion including the details captured during the verification
process and conclusion relating to compliance with energy consumptions
norms and standards, increase or decrease in specific energy consumption with
reference to the specific energy consumption in the baseline year, entitlement
about the issue or liability to purchase energy savings certificate.
(7) If the accredited energy auditor records in his check-verification report, a positive
opinion, it shall be concluded that all the requirements with regard to the compliance
with energy consumption norms and standards and the issue or purchase of energy
savings certificates have been met.
(8) If the accredited energy auditor records in his check-verification report, a negative
opinion, the effect of such opinion on the energy consumption norms and standards,
issue or purchase of energy savings certificate, the liability of the accredited energy
auditor in giving the verification report and amount of the unfair gain gained by the
designated consumer as a result of such verification report shall be calculated by the
accredited energy auditor conducting the check-verification.
(9) The accredited energy auditor in-charge of check-verification shall submit his report
with due certification in Form ‘C’ to the Bureau and the concerned State Designated
Agency.
(10) Where the verification report given by the accredited energy auditor secures an unfair
or undue gain due to the deficiencies or inconsistencies or errors or misrepresentation
by the designated consumer, the quantum of such gain shall be calculated having
regard to the following factors, namely:-
(a) the value of the amount payable by such designated consumer shall be as
worked out in the verification report plus twenty-five per cent. of such value
because of unfair practice used by the said designated consumer for obtaining
unfair advantage;
(b) the amount of metric ton of oil equivalent of energy specified because of unfair
gain identified due to check-verification;
(c) cost of check-verification.
(11) The State designated agency may furnish its comments on the report within ten
days from the receipt of the report from the said accredited energy auditor and in

case no comments are received from the concerned state designed agency, it shall be
presumed that they have no comments to offer in the matter.
(12) The Bureau after the expiry of ten days referred to in sub-rule (11), shall issue show
cause notice to the designated consumer as well as to his accredited energy auditor
specifying the deficiencies or inconsistencies or errors or misrepresentation noticed
against the designated consumer and his accredited energy auditor.
(13) The designated consumer as well as his accredited energy auditor shall submit their
replies to the said show cause notice within a period of fifteen working days to the
officer of the Bureau who has issued that show cause notice.
(14) The Bureau after examining the said replies to the show cause notice referred to in
sub-rule (13), shall forward the report to the concerned State designated agency
specifying the following details for the purpose of initiating the penalty proceedings,
namely:-
(a) the number of energy savings certificates wrongfully obtained by the designated
consumer on the basis of verification report found to be wrong and false on
check-verification;
(b) the number of energy savings certificates which the designated consumer was
liable to purchase for non-compliance with the energy consumption norms and
standards as found in the check-verification report;
(c) details of the misrepresentation, if any and the unfair gain due to such
misrepresentation;
(d) the cost of check- verification.
(15) The State designated agency within two months from the date of the receipt of the
report referred to in sub-rule (9) shall initiate-
(a) action to recover from the designated consumer the loss to the Central
Government by way of unfair gain to the designated consumer;
(b) penalty proceedings against the persons mentioned in the said report, under
intimation to the Bureau;
(c) register complaint for such fraudulent unfair gain if designated consumer does
not pay penalty and loss to the exchequer in the specified time mentioned in the
penalty proceedings.
(16) Where the check-verification has been initiated on the basis of a complaint received
by the Bureau, the cost of check-verification shall be borne by the complainant, in
case it was found on check-verification that the designated consumer has submitted
correct information in Form ‘A’.

(17) Where the check-verification has been initiated on the basis of a complaint received
by the Bureau, the cost thereof shall be borne by the designated consumerin case it
was found on check-verification that the designated consumer has submitted false
and incorrect information in Form ‘A’.
9. Procedure regarding compliance with energy consumption norms and standards and issue
of energy savings certificate.-(1) A firm registered under the Indian Partnership Act, 1932
(9 of 1932) or a company incorporated under the Companies Act, 1956 (1 of 1956) or any
other legal entity competent to sue or to be sued or enter into contracts shall be entitled
to undertake verification and check-verification regarding compliance with the energy
consumption norms and standards and issue or purchase of energy savings certificate if it,-
(a) has at least one accredited energy auditor whose name is included in the list of
the accredited energy auditors maintained by the Bureau under regulation 7 of
the Bureau of Energy Efficiency (Qualifications for Accredited Energy Auditors
and Maintenance of their List) Regulations, 2010;
(b) has at least three energy auditors;
(c) has adequate expertise of field studies including observations, probing skills,
collection and generation of data, depth of technical knowledge and analytical
abilities for undertaking verification and check-verification;
(d) has a minimum turnover of ten lakhs rupees per annum in at least one of the
previous three years or in case of a newly formed organisation, a net worth of
ten lakhs rupees.
(2) The Bureau shall invite applications from the firms, companies and other legal
entities to undertake the work of verification and check-verification for the purpose of
preparing a panel of such firms, companies and other legal entities.
(3) The applications referred to in sub-rule (2) shall be accompanied by a certificate of

registration or in corporation as the case may be.
(4) The applications so received shall be scrutinised in accordance with the provisions
of sub-rule(1) and a panel of eligible applicants shall be prepared which shall be
displayed on the web site of the Bureau, that is, www.bee-india.nic.in.
(5) The selected applicants shall be issued a certificate of empanelment in support their
selection to undertake the function of verification and check-verification as accredited
energy auditor.
(6) A unique identification number shall be issued to the accredited energy auditors
referred to in sub-rule (5).

10. Obligations of accredited energy auditor.- (1) For the work of verification or check
verification, the accredited energy auditor shall constitute a team comprising of a team head
and other members including experts:
Provided that a person who was in the employment of a designated consumer within
the previous four years, shall not be eligible to perform the work of verification or check-
verification for such designated consumer;
Provided further that any person or firm or company or other legal entity, who was
involved in undertaking energy audit in any of the designated consumer within the
previous four years, shall not be eligible to perform the work of verification or check-
verification for such designated consumer.
(2) The accredited energy auditor shall ensure that persons selected as team head and
team members must be independent, impartial and free of potential conflict of
interest in relation to activities likely to be assigned to them for verification or check-
verification.
(3) The accredited energy auditor shall have formal contractual conditions to ensure that
each team member of verification and check-verification teams and technical experts
act in an impartial and independent manner and free of potential conflict of interest.
(4) The accredited energy auditor shall ensure that the team head, team members and
experts prior to accepting the assignment inform him about any known, existing,
former or envisaged link to the activities likely to be undertaken by them regarding
verification and check verification.
(5) The accredited energy auditor must have documented system for determining the
technical or financial competence needed to carry out the functions of verification and
check -verification and in determining the capability of the persons referred to in sub-
rule (2), the accredited energy auditor shall consider and record among other things
the following aspects, namely:-
(a) complexity of the activities likely to be undertaken;
(b) risks associated with each project activity;
(c) technological and regulatory aspects;
(d) size and location of the designated consumer;
(e) type and amount of field work necessary for the verification or check-
verification.
(6) The accredited energy auditor shall have documented system for preparing the
plan for verification or check-verification functions and the said plan shall contain

all the tasks required to be carried out in each type of activity, in terms of man
days in respect of designated consumers for the purpose of verification and check
-verification.
(7) The names of the verification or check-verification team members and their bio-
data shall be provided by the accredited energyauditor to the concerned designated
consumer in advance.
(8) The verification or check-verification team shall be provided by the accredited energy
auditor with the concerned working documents indicating their full responsibilities
with intimation to the concerned designated consumer.
(9) The accredited energy auditor shall have documented procedure-
(i) to integrate all aspects of verification or check-verification functions;
(ii) for dealing with the situations in which an activity undertaken for the purpose
of compliance with the energy consumption norms and standards or issue
of energy savings certificate shall not be acceptable as an activity for the said
purposes.
(10) The accredited energy auditor shall conduct independent review of the opinion of
verification or check-verification team and shall form an independent opinion and
give necessary directions to the said team if required.
(11) In preparing the verification and check-verification reports, the accredited energy
auditor shall ensure transparency, independence and safeguard against conflict of
interest.
(12) The accredited energy auditor shall ensure the confidentiality of all information and
data obtained or created during the verification or check verification report.
(13) In assessing the compliance with the energy consumption norms and standards and
issue of energy savings certificates, the accredited energy auditor shall follow the
provisions of the Act, rules and regulations made thereunder.
(14) After completion of the check-verification, the accredited energy auditor shall submit
the check-verification report, together with the certificate in Form-‘C’, to the Bureau.
11. Recommendation for issue of energy savings certificates.- (1) The Bureau on satisfying itself
about the correctness of verification report, and check-verification report, wherever sought
by it, send its recommendation under clause (aa) of sub-section (2) of section 13 to the
Central Government, based on the claim raised by the designated consumer in Form ‘A’,
within ten working days from the last date of submission of said Form ‘A’ by the concerned
state designated agency, for issuance of energy savings certificates under section 14A and
the recommendation shall specify.-

(a) the exact number of energy savings certificates to be issued to the designated
consumer and the entitlement for such energy savings certificates after
determining by the following formula:
(i) for thermal power plant sector:
number of energy savings certificates =

(heat rate notified for the target year
– heat rate as acheived in the target year)
× production in the baseline year in million kwh/10
(ii) for other sectors:
number of energy savings certificates =

(specific energy consumption notified for the target year
– specific energy cosnumption as acheived in the target year)
× production in the baseline year
(b) the identity of the concerned designated consumers;
(c) the certification that all the requirements for issue of energy savings certificates
have been complied with, by the designated consumer and his entitlement has
been certified in the verification report by the accredited energy auditor.
(2) The designated consumer may seek issue of energy savings certificates in proportion
of its performance achieved during the first or second or target year with respect to
compliance with the energy consumption norms and standardsand the Bureau on
satisfying itself about the correctness of verification report, and check-verification
report, wherever sought by it, send its recommendation under clause (aa) of sub-
section (2) of section 13 to the Central Government, based on the claim made by the
designated consumer in Form ‘A’, for issue of energy saving certificates not exceeding
eighty percent. of the entitlement in a year other than the target year under section
14A.
(3) The total amount of energy savings certificates recommended under sub rule (2)
shall be adjusted against the entitlement on conclusion of the target year as per the
following formulae:-
(A) for thermal power plant sector:
(i) energy savings certificate to be issued after year 1 =

{[heat rate in the baseline year – (heat rate in the baseline year –
heat rate notified for the target year) ÷ 3] –
heat rate achieved in year 1} × 80% ×
production in million kwh in the baseline year/10;

(ii) adjusted heat rate after year 1 =
heat rate notified for target year –
(energy savings certificates issued in year 1 ÷
productionin million kwh in the baseline year) × 10;
(iii) energy savings certificate to be issued after year 2 =

heat rate adjusted after year1) × 2 ÷ 3] –
heat rate achieved in year 2} × 80% ×
production in million unit in the baseline year/10;
(iv) adjusted heat rate after year 2 =

heat rate adjusted after year 1 –
production in million in the baseline year) × 10
(v) energy savings certificate to be issued in the target year =

heat rate adjusted after year 2)] –
heat rate achieved in the target year} ×
production in million kWh in the baseline year/10;
(vi) total number of energy savings certificates issued in the cycle =

energy savings certificates issued in year 1 +
energy savings certificates issued in target year.
(B) for other sectors:

(i) energy savings certificate to be issued after year 1 =
{[specific energy consumption in the baseline year –
(specific energy consumption in the baseline year –
specific energy consumption notified for the target year) ÷ 3] –
specific energy consumption achieved in year 1} × 80% ×
production in the baseline year;
(ii) adjusted specific energy consumption after year 1 =

specific energy consumption notified for target year –
production in the baseline year);
(iii) energy savings certificate to be issued after year 2 =

specific energy consumption adjusted after year1) × 2 ÷ 3] –
specific energy consumption achieved in year 2} × 80% ×

(iv) adjusted specific energy consumption after year 2 =
specific energy consumption adjusted after year 1 –
production in the baseline year)
(v) energy savings certificate to be issued in the target year =

specific energy consumption adjusted after year 2) ] –
specific energy consumption achieved in the target year} ×
(vi) total number of energy savings certificates issued in the cycle =

energy savings certificates issued in target year.
12. Procedure for issue of energy savings certificate.-(1) The Central Government, on the receipt
of recommendation from the Bureau under rule 10, shall on satisfying itself in this regard,
issue energy savings certificates of required value to the concerned designated consumer
with in fifteen working days from the date of receipt of such recommendation from the
Bureau.
(2) The energy savings certificate shall be issued in electronic form.
(3) The value of one energy savings certificates shall be equal to one metric ton of oil
equivalent of energy consumed.
(4) The designated consumer who has been issued energy savings certificates may sell
them through the power exchange.
(5) The designated consumer who has been issued the energy savings certificates during
the current cycle may use them for the purpose of banking until the next compliance
cycle.
(6) The energy savings certificates issued in a cycle period shall remain valid till the
completion of the compliance period of the next cycle.
(7) The energy savings certificates purchased by a designated consumer for the purpose
of compliance with the energy consumption norms and standards shall after their
submission to the Bureau stand expired.
13. Compliance of energy consumption norms and standards.- (1) The designated consumer
for the purpose of achieving the compliance with the energy consumption norms and
standards during the target year, in the relevant cycle shall take the following action and
after completing the said action, furnish the status of compliance to the concerned state

designated agency with a copy to the Bureau in Form ‘D’by the end of five months from the
last date of submission of Form ‘A’-
(a) by implementation of energy conservation and energy efficiency improvement

measures or;
(b) where the measures implemented in terms of clause (a) are found inadequate
for achieving compliance with the energy consumption norms and standards,
the designated consumer shall purchase the energy savings certificates
equivalent in full satisfaction of the shortfall in the energy consumption norms
and standards worked out in terms of metric ton of oil equivalent.
14. Establishment of new baseline for next cycle.- The energy consumption norms and
standards achieved by the designated consumer on the completion of the target year, as
mentioned in the compliance report in Form-‘D’ shall be the baseline for establishment of
new plant specific energy consumption norms and standards for designated consumers for
the next cycle.
15. Obligations of the designated consumers.-The designated consumers shall,-
(a) for assessment of their performance for compliance with the energy consumption
norms and standards, get the work of verification done through accredited energy
auditors;
(b) take all measures including implementation of energy efficiency projects

recommended by the accredited energy auditor and good practices prevalent or in
use in the concerned industrial sector so as to achieve the optimum use of energy in
their plant ;
(c) furnish the full and complete data, provide necessary documents and other facilities
required by the accredited energy auditor for the purpose of performing the function
of verification and check-verification.
16. Specification of value of energy.-(1) The value of per metric ton of oil equivalent of energy
consumed shall be determined by applying the following formula, namely:-
P = Wc × Pc + Wo × Po + Wg × Pg + We × Pe
Where-
P = price of one metric ton of oil equivalent(1toe);
Pc = average price of delivered coal;
Po = price of fuel oil as declared by Indian Oil Corporation Limited;
Pg = price of gas as declared by Gas Authority of India Limited;

Pe = average price of one unit of electricity for industrial sector in the States of Chattisgarh,
Gujarat, Maharashtra, Madhya Pradesh and Tamil Nadu as specified by the respective State
Electricity Regulatory Commission;
all prices shall be as on 1st April of the year for which value of energy is being specified.
Weightage of coal (Wc) =

(amount of coal consumed across all designated consumers in the baseline year (in toe))
;
(total energy consumption across all designated consumers in the baseline year (in toe))
Weightage of oil (Wo) =

(amount of oil consumed across all designated consumers in the baseline year (in toe))
;
(total energy consumption across all designated consumers in the baseline year (in toe))
Weightage of electricity (We) =

(amount of electricity consumed across all designated consumers in the baseline year (in
;
toe))/(total energy consumption across all designated consumers in the baseline year(in toe))
(2) The value of per metric ton of oil equivalent of energy consumed for the purpose of
these rules shall be rupees 10154 for the year 2011-12.
(3) The value of per metric ton of oil equivalent of energy consumed shall be reviewed
every year for the purpose of sub-rule (2).

Form – A
(See rule 5)
PERFORMANCE ASSESSMENT DOCUMENT
(To be filled by designated consumer)
1. Name of designated consumer
2. Registration number
3. Sector
4. Sub-sector
5. Accredited energy auditor
Name
Registration number
6. List of documents submitted
a. Baseline data (three years) Submitted/Not submitted Date of submission
b. Form I () Submitted/Not submitted Date of submission

Specify the year in the bracket
c. Form I ( ) Submitted/Not submitted Date of submission

d. Form I ( ) Submitted/Not submitted Date of submission

e. Form II Submitted/Not submitted Date of submission
f. Form III Submitted/Not submitted Date of submission

7. Target
Year Notified target specific Energy Revised target specific energy

energy consumption for savings consumption for the cycle
the cycle certificates
issued
toe/ton of product or Net Nos toe/ton of product or Net Kcal/

Kcal/kWh kWh
a. Mention -
the year
( )
b. Mention
the year
( )
c. Mention
the year
( )
8. Specific energy consumption
a. Specific energy consumption toe/ton or Net kcal/

(baseline) kWh
b. Production (baseline) ton or Million kWh
c. Revised target SEC (from 7.b) toe/ton or Net kcal/

kWh
d. Target after normalisation, if any toe/ton or Net kcal/

kWh
e. Achieved specific energy toe/ton or Net kcal/

consumption kWh
f. Energy savings certificates nos

9. Energy Efficiency Project implemented during current cycle
Project Year of Annual Annual Energy Investment

Implementation Energy Energy tariff
consumption consumption
(before) (after)
a.
b.
c.
d.
e.
f.
Note 1: Form A may be filled in accordance with the following guidelines, namely:-
GUIDELINES
1. Name of designated consumer: As per notification under clause (g) of section 14.
2. Registration No: As provided at the time of registration for this portal
3. Sector:
• Aluminium
• Cement
• Chlor Alkali
• Fertilizer
• Iron and Steel
• Pulp and Paper
• Textile
• Thermal Power Plant

4. Sub Sector:
Sector Basis for Sub-sector Sub-Sector

Thermal Power Plant Fuel Based Coal, Gas, Oil
Cement Process Based Dry, Wet
Iron and Steel Operation Based Integrated, Sponge Iron
Fertilizer Feedstock Based Natural Gas, Naptha
Aluminum Product Based Refinery, Smelter
Pulp and Paper Raw Material Based Wood, Agro, Recycled Fibre
Textile Operation Based Spinning, Processing,
Composite, Fiber yarn
Chlor-Alkali Technology Based Membrane cell, Mercury
5. Name of accredited energy auditor: As selected by designated consumer from list of

accredited energy auditor empanelled by Bureau of Energy Efficiency.
6. List of documents submitted:
(a) Baseline data (three years): Submitted to Bureau of Energy Efficiency for Target
Calculations
(b) Form I mention the year ( ): As per filing, attach acknowledgement of submission i.e.
after completion of 1st year after notification
(c) Form I mention the year ( ): As per filing, attach acknowledgement of submission i.e.
after completion of 2nd year after notification
(d) Form I mention the year ( ): As per filing, attach acknowledgement of submission i.e.
after completion of target year
(e) Form II: As per filing, attach acknowledgement of submission
(f) Form III: As per filing, attach acknowledgement of submission
7. Target: Enter target as notified by Government of India under clause (g)of section 11 (target
specific energy consumption). Enter energy savings certificates, if any, issued in last three
years). Adjusted target calculated as per formulae mentioned in rules.
8. Specific energy consumption (SEC)
(a) Specific Energy Consumption (Baseline): As notified by Government of India as

aforesaid.

(b) Production (Baseline): As notified by Government of India as aforesaid.
(c) Revised target specific energy consumption (from 7.b): if any (in metric ton of oil
equivalent /unit production), or as notified by Government of India or enter 8.a
(d) Target after normalisation, if any: as notified by Government of India as aforesaid

(in metric ton of oil equivalent /unit production) and calculated as specified in the
schedule, else enter 8.c
(e) Achieved specific energy consumption: Achieved specific energy consumption in the
year of submission of Form ‘A’
(f) energy savings certificates: calculate as per formulae provided in the rule 10.
9. Project implemented during current cycle: Energy efficiency projects implemented by

designated consumers during last three years. Attach photograph of energy savings projects
implemented.
Undertaking
I/We undertake that the information supplied in this Performance Assessment Document
is accurate to the best of my knowledge and if any of the information supplied is found to be
incorrect and such information result into loss to the Central Government or State Government
or any of the authority under them or any other person affected, I/we undertake to indemnify
such loss.
I /We agree to extend necessary assistance in case of any enquiry to be made in the matter.
Signature
Name
Designation
For and behalf of
Name of the Firm/Company/Organisation
SEAL of the Firm /Company/Organisation

Form B
(See rule 5)
CERTIFICATE OF VERIFICATION
I/We __________________the accredited energy auditor, have undertaken a thorough

independent evaluation of the activities undertaken by M/s. _________________ , a designated
consumer for compliance with the energy consumption norms and standards specified under
the Government of India Ministry of Power notification number_______________, dated the
___________during the target year compared to the baseline year and consequent entitlement or
requirement of energy savings certificates and certify that-
(a) the verification of the data collection in relation to energy consumed and specific
energy consumption per unit of production in the baseline year and in the target
year in Form 1under Rules 2007 or Rules 2008, has been carried out diligently and
truthfully;
(b) the verification of the identified energy efficiency measures, and the progress of their
implementation given in Form II and Form III under Rules 2008 has been carried out
diligently and truthfully;
(c) the verification of the compliance with energy consumption norms and standards
during the target year has been carried out diligently and truthfully;
(d) the verification of the total amount of energy saved, year-wise, after the baseline year
and until target year or otherwise and request made by the designated consumer, the
entitlement of _________ (Nos) energy savings certificate (s) required to be issued or
purchased by him have been carried out diligently and truthfully;
(e) all reasonable professional skill ,care, and diligence have been taken in verifying
the various verification activities, findings and conclusions, documents, reports,
preparing the documents including the performance assessment document in Form
‘A’ and verification report and the contents thereof are a true representation of the
facts.
Signature:
Name of accredited energy auditor for verification Seal
Designation:

Form C
(See rule 7)
Certificate of Check – Verification
I/We __________________the accredited energy auditor, have undertaken a thorough

independent evaluation of the activities undertaken by M/s. _________________,a designated
consumer for compliance to the energy consumption norms and standards specified under the
Government of India, Ministry of Power notification numbers ___________________, dated the
____________during the target year compared to the baseline year and consequent entitlement or
requirement of energy savings certificates, mentioned in the Performance Assessment Document
in Form ‘A’ and compliance of energy consumption norms and standard document in Form ‘D’
and certify that-
(a) the check-verification of the data collection in relation to energy consumed and
specific energy consumption per unit of production in the baseline year and in the
target year in Form 1under Rules 2007 or Rules 2008, has been carried out diligently
and truthfully;
(b) thecheck-verification of the identified energy efficiency measures, and the progress of
their implementation given in Form II and Form III under Rules 2008 has been carried
out diligently and truthfully;
(c) thecheck-verification of the compliance with energy consumption norms and
standards during the target year has been carried out diligently and truthfully;
(d) the check-verification of the total amount of energy saved, year-wise, after the
baseline year and until target year or otherwise and request made by the designated
consumer, the entitlement of _________ (Nos) energy savings certificate (s) required to
be issued or purchased by him have been carried out diligently and truthfully;
(e) all reasonable professional skill, care, and diligence have been taken in
check-verifying the various verification activities, findings and conclusions,
documents, reports, preparing the documents including the information given
in the Performance Assessment Document in Form ‘A’ and verification report
submitted by the accredited energy auditor appointed by the designated consumer
………………………… for verification and the contents thereof are a true
representation of the facts.
Signature:
Name of accredited energy auditor for check-verification Seal
Designation:

Form D
(See rule 12)
COMPLIANCE OF ENERGY CONSUMPTION NORMS AND STANDARD DOCUMENT
(To be filled in by designated consumer)
1. Name of designated consumer
2. Registration number
3. Sector
4. Sub-sector
5. List of documents submitted
a. Performance Assessment Submitted/Not Submitted Date of Submission

Document (Form ‘A’)
6. Compliance
a. Energy Savings Certificates Issued/Recommended

for purchase
b. Energy Savings Certificates If recommended for

submitted for compliance purchase
c. Balance Energy Savings Nos

Certificates
Note 1: Form D may be filled in accordance with the following guidelines:-
GUIDELINES
1. Name of designated consumer: As per notification from Government of India (GoI) under
clause (g) of section 14
2. Registration number: As per E-filing

3. Sector:
• Aluminium
• Cement
• Chlor Alkali
• Fertilizer
• Iron and Steel
• Pulp and Paper
• Textile
• Thermal Power Plant
4. Sub Sector:
Sector Basis for Sub-sector Sub-Sector
Thermal Power plant Fuel Based Coal, Gas, Oil
Cement Process Based Dry, Wet
Iron and Steel Operation Based Integrated, Sponge Iron
Fertilizer Feedstock Based Natural Gas, Naptha
Aluminum Product Based Refinery, Smelter
Pulp and Paper Raw Material Based Wood, Agro, RCF
Textile Operation Based Spinning, Processing,

Composite, Fiber yarn
Chlor-Alkali Technology Based Membrane cell, Mercury
5. List of Documents submitted:
(a) Performance assessment document: Submitted to Bureau of Energy Efficiency for

issue of energy savings certificates.
6. Compliance
(a) Energy savings certificates: Enter +ve value if energy savings certificates issued to
designated consumer or enter -ve value in case recommended for purchase of energy
savings certificates

(b) Energy savings certificates submitted for compliance: If designated consumer is
recommended for purchase of energy savings certificates, then enter value of energy
savings certificates submitted by designated consumer for compliance of energy
consumption norms and standards- saving target of designated consumer.
(c) Balance energy savings certificates:- Numbers of energy savings certificates balance. If
balance is ZERO than DC is in accordance for compliance of energy saving target and
if balance is -ve than DC will be recommended for penalty.
Undertaking
I/We undertake that the information supplied in compliance with energy consumption and
standard documents in this Form ‘D’ is accurate to the best of my/our knowledge and if any
of the information supplied is found to be incorrect and such information result into loss to
the Central Government or State Government or any of the authority under them or any other
person affected, I/we undertake to indemnify such loss.
I/we agree to extend necessary assistance in case of any enquiry is made in the matter.
Signature
Name
Designation
For and behalf of
Name of the Firm/Company/Organisation
SEAL of the Firm/Company/Organisation

Schedule
[See rules 2, 4 and 7]
1. Determination of baseline specific energy consumption.-
1.1 Specific energy consumption (See rule 2(l))
(a) The specific energy consumption (SEC) gives the indication of efficient
utilisation of different sources of energy in a plant operational boundary to
produce one unit of product, which is defined as the ratio of total energy input
to plant boundary and the quantity of products produced and specific energy
consumption of an industry shall be calculated based on Gate-to-Gate concept
with the following formula:-
Specific Energy Consumption =

Net energy input into the designated consumers’ boundary
Total quantity of output exported from the designated consumers’ boundary
and expressed in terms of the metric ton of oil equivalent (toe)/per unit of
product;
Note: value to be rounded to three decimal places.
Table 1: Definition of product to calculate specific energy consumption
Sector Main product Unit
Cement Cement ton
Fertilizer Urea ton
Iron and Steel (Integrated) Crude Steel ton
Iron and Steel (Sponge Iron) Sponge Iron ton
Aluminium (Refinery) Alumina ton
Aluminium (Smelter) Molten Aluminium ton
Aluminium (Integrated) Molten Aluminium ton
Pulp and Paper (Pulping) Pulp ton
Pulp and Paper (Only Paper Making) Paper ton
Pulp and Paper (Pulp and Paper) Paper ton
Textile (Spinning) Yarn Kg

Sector Main product Unit
Textile (Composite) Yarn/Fabric kg
Textile (Fibre) Fibre kg
Textile (Processing) Fabric kg
Chlor-Alkali Equivalent Caustic Soda ton
Power Plant Electricity Million kWh
1.2 Gate-to-Gate designated consumer boundary(sector-specific)
(a) As the specific energy consumption (SEC) is calculated on a Gate-to-Gate

concept, the plant boundary shall be selected in such a manner that the total
energy input and the above product defined in Table 1,is be fully captured and
the entire designated consumers’plant. The colony, residential complex and
transportation system, mining operations in case of Iron and Steel, Aluminum
and Cement sectors are not part of designated consumers ’boundary.
(b) Once the designated consumers’ boundary has been fixed, the same boundary
shall be considered for entire cycle, and any change in the said boundary such
as capacity expansion, merger of two plants, division of operation etc. shall be
duly intimated to the Bureau of Energy Efficiency.
(c) The following designated consumers’ boundaries will be considered in the first
cycle:-
Case-I: All energy purchased and consumed:-
• Electricity is purchased from the grid
Case-II: Electricity partially generated by diesel generating(DG) set ,other

energy purchased and consumed:-

• Electricity is purchased from the grid and generated by DG set
Case -III: Electricity generated by captive power plant and other energy
purchased and consumed, electricity partially sold to grid:-
• Electricity is generated by coal based captive power plant, partially sold to

grid-
Case -IV: Electricity generated by captive power plant(CPP), other energy purchased
and consumed, electricity partially sold to grid from captive power plant:-
• Electricity is generated by coal based captive power plant, partially sold to

grid and captive power plant is in separate boundary-

Case -V: Energy purchased and consumed, electricity and heat partially
generated through co-generation plant
• Electricity and heat are generated by co-generation Plant-
CASE -VI: Energy purchased and consumed, heat energy partially met by waste
or by-product of the process-

1.3 Methodology for calculating baseline specific energy consumption.-
(a) During the first cycle designated consumer having more than five years life,
data for the previous three years, namely, 2007-08, 2008-09, 2009-10 shall be
considered provided the capacity utilization is uniform. Normalisation, in a
suitable statistical approach, shall be done in case of abnormality in capacity
utilisation in any of the aforesaid three year (s).
(b) During the first cycle designated consumer having more than five years life
and less than three years data has been reported, the same shall be considered
provided the capacity utilisation is uniform and if the capacity utilisation
is abnormally low in any of the aforesaid three year(s), the same shall not be
considered.
(c) During the first cycle, designated consumer having less than five years life
and less than three years data has been reported, the available year’s data
shall be considered provided the capacity utilisation is uniform. If the capacity
utilisation is abnormally low in any of the year(s), the same shall not be
considered.
(d) During the first cycle, in case of new designated consumer, the data shall
be considered for those years where the capacity utilisation is greater than
seventy percent. (70%) and if only one year data is reported, the same shall be
considered irrespective of the capacity utilisation.
(e) In the next cycle, baseline specific energy consumption shall be calculated in
accordance with the provisions of rule 14.
(e) Few additional sector specific information like process technology, process flow,
raw material, product mix etc. shall also be collected.
(f) All forms of energy shall be converted into a single form i.e. metric ton of oil
equivalent (toe) by the use of standard engineering conversion formula and the
following general guiding principle shall be used in this regard:-
(i) The reported gross calorific value (GCV) of fuels by the designated
consumer shall be considered for estimating the equivalent thermal
energy.
(ii) If gross calorific value (GCV) is not reported, then the values mentioned
in the Government of India, Ministry of Power, notification number
S.O 394(E), dated the 12th March, 2007 shall be considered. Any other
information as required shall be taken from standard industrial practice.
(iii) The equivalent thermal energy of the electricity supplied to the grid shall
be deducted from the total energy input to the designated consumers’
boundary. The following expression shall be used:-

Equivalent thermal energy (kcal) =Electricity supplied to grid(kWh) x
national average heat rate in kcal/kWh in the baseline year.
National average heat rate in year 2009-10 was 2717 kcal/kWh.
(iv) Total energy input to the designated consumers’ boundary shall be

estimated with the following expression:-
Energy input (toe) = Fuel consumed quantity (kg) x gross calorific value (kCal/kg)

10 7
(v) Once the total energy input to the designated consumers’ boundary is
estimated, the specific energy consumption shall be calculated by dividing
the product quantity.
1.4 Procedure for normalisation of specific energy consumption.-
(a) Variable factors as described in rule 4 may affect the energy consumption and
‘Normalisation Factors’ shall be considered in those cases. Capacity utilisation
is one of the most important parameters to have a normalisation factor.
The reported specific energy consumption (SEC) shall be normalised after
incorporating the normalisation factor.
Normalized specific energy consumption = f (Reported SEC, normalization factors).
(b) The specific energy consumption shall be normalised, during baseline and target
periods, based on statistical procedures.
(c) The normalisation procedure is proposed to be applied if the capacity utilisation

or Plant Load Factor (PLF) has a deviation of more than thirty percent. It
shall be applied only if capacity utilisation has deviated due to uncontrollable
factors described in rule 4, and duly declared by the designated consumer with
authentic proof or self certifications.
(d) The normalisation shall be doneby performing a statistical analysis of the

specific energy consumption and production data by-
(i) plotting the production versus energy consumption curves;
(ii) performing statistical analysis to represent the relationship between the

production and energy consumption;
(iii) extrapolating the above relationship to generate capacity utilisation

versus energy consumption and capacity utilisation versus specific energy
consumption data for a suitable range of capacity utilisation values;
(iv) the average capacity utilisation shall be used to identify the corresponding
specific energy consumption value;

(v) the normalised specific energy consumption shall be the value as
computed in the previous step;
(e) The “capacity utilisation” referred to in clauses (c) to (d) shall be replaced by
“Plant Load Factor” in case of designated consumers in the thermal power plant
sector;
(f) The above calculation determines the normalised specific energy consumption
for the designated consumers.
2. Thermal power plant sector.-
2.1 The designated consumersfor the thermal power plant sector shall be grouped based
on the fuel used and they are as under:-
2.2 The energy consumption norms and standards for power stations shall be specified in
terms of specific percentage of their present deviation of net operating heat rate,based
on the average of previous three years, namely, 2007-8,2008-9,2009-10 for the first
cycle ,and for cycles thereafter in accordance with the provision of rule 14from the net
design heat rate. The power stations shall be grouped into various bands according to
their present deviations, of operating heat rate from design heat rate and for power
stations with higher deviations the energy consumption norms and standards shall
be established at lower level and shall be grouped taking into account percentage
deviation as under:-
Deviation in net station heat rate from Reduction target for percentage
design net heat rate deviation in the net station heat rate
Upto five per cent Ten per cent (10%)
More than five per cent and upto ten Seventeen per cent (17%)
percent
More than ten per cent and upto twenty Twenty-one per cent (21%)
percent
More than twenty per cent. Twenty-four per cent (24%).
2.5 Correction factor considered for effect on heat rate due to coal quality:
(a) Average “ash”, moisture, and gross calorific value for the previous three years
in case of baseline for first cycle and as per rule 14 for consequent cycles and

specified year in case of target year,shall be taken into account for the baseline
year andcorrection factor shall be worked out based on the following boiler
efficiency formula:-
[50 * A + 630 (M + 9 H)]

Boiler Efficiency = 92.5 –
G.C.V
Where:
A = Ash percentage in coal
M = Moisture percentage in coal
H = Hydrogen percentage in coal
G.C.V = Gross calorific value in kcal/kg
Station heat rate (Kcal/kWh) = Turbine heat rate/Boiler efficiency
(b) The permissible error shall be ±0.05% in terms of toe for the purpose of
determining entitlement of energy savings certificates.
3. Cement sector.-
3.1 For establishment of energy consumption norms and standards for designated
consumers in the cement sector, the designated consumers shall be grouped based
on similar major output or product with the available data to arrive at a logical and
acceptable spread of specific energy consumption among the designated consumers
which shall be grouped as under:-
Normalization Factors
3.2 Equivalentmajor grade of cement production.-The various product mixes shall

be converted in to equivalent major grade of cement product by the designated
consumer by using the following formulae:-
(i) Conversion of Ordinary Portland Cement (OPC) production equivalent to major

product
OPC produced (Lakh ton) × Conversion factor of OPC
Equivalent major product =
Conversion factor of major product
[Lakh ton]

(ii) Conversion of Portland Pozzolana (PPC) production equivalent to major
product
PPC produced (Lakh ton) × Conversion factor of PPC

[Lakh ton]
(iii) Conversion of Portland Slag Cement (PSC) or any other variety of cement
production equivalent to major product
PSC or any other variety cement produced (Lakh ton) ×
Conversion factor of PSC or any other variety cement
[Lakh ton]
(iv) Conversion of total exported clinker to major product
Total exported clinker (Lakh ton)

[Lakh ton]
Where: Total exported clinker = [Clinker exported to other plants + clinker

exported to clinker stock over and above the opening stock]
(v) Conversion of total imported clinker to major product
Total imported clinker (Lakh ton)

[Lakh ton]
Where: Total Imported clinker = [Clinker Imported from other plants + clinker
Imported from clinker stock, equivalent to the quantity by which the clinker
opening stock gets reduced]
(vi) Total equivalent major product of cement
It can be arrived at by summing up all the different grades of cements

equivalent to major product calculated above:
Total Equivalent major product of Cement = a(i) + a( ii) + a(iii) + a( iv)
[Lakh ton]
Note: S.No. a(v) is already accounted in major product

3.3 Calculation for Gate to Gate specific energy consumption (SEC)
(i) Total thermal energy consumption
Total thermal energy consumption is to be calculated as:-
Total thermal energy consumption = [Fuel consumed (Lakh ton) × Gross calorific
value of respected fuel (kcal/kg) × 100]
[Million kcal]
(ii) Total electrical energy consumption
Total electrical energy consumption is to be calculated as:-
Total electrical energy consumption = [{(Total electricity purchased from grid

(Lakh kWh) × 860(kcal/kWh) – electricity exported
to grid (Lakh kWh) × 2717 (kcal/kWh)}/10]
[Million kcal]
Where: - 2717 kcal/kWh is national average heat rate.
(iii) Notional/ Normalisation energy for imported electricity from grid
Notional energy for imported electricity = [Imported electricity (lakh kWh) ×

(3208 – 860) (kcal/kWh)] /10
[Million kcal]
Where: - 3208 kcal/kWh is weighted average heat rate of all designated

consumers in cement sector.
(iv) Notional/Normalisation energy Required for grinding of exported clinker
It is calculated by using following formula:
Notional energy required = {Total exported clinker to major product (Lakh ton) ×
Electrical SEC of cement grinding (kWh/ton of cement)
× Weighted average heat rate (kcal/kWh)}/10
[Million kcal]
Where: -Weighted average heat rate (kcal/kWh) = [{Imported electricity (Lakh

kWh) × 3208 (kcal/kWh)} + {diesel generation (lakh kWh) × diesel generator
heat rate (kcal/kWh)} + {Captive power plant generation (lakh kWh) × Captive
power plant heat rate (kcal/kWh)}]/[Imported electricity (Lakh kWh) + diesel
generation (Lakh kWh) + Captive power plant generation (Lakh kWh)]

(v) Notional/Normalisation energy required for clinkerisation of imported clinker
It is calculated by using following formula:
Notional energy required = [Total clinker imported (Lakh ton) × {Thermal SEC
of clinkerization kcal/kg clinker) × 1000 + electrical SEC of clinkerization (kWh/
ton of clinker) × Weighted average heat rate (kcal/kWh)}/10] [Million kcal]
(vi) Gate to Gate (GtG) energy consumption
GtG energy consumption = b(i) + b(ii) + b(iii) + b(iv) + b(v) [Million kcal]
(vii) Gate to Gate (GtG) specific energy consumption
GtG energy consumption (Million kCal)

GtG GEC =
Total equivalent major product of cement (Lakh ton) × 100
[kcal/kg of equivalent cement]
3.4 The permissible error shall be ±0.05% in terms of toe for the purpose of determining
entitlement of energy savings certificates.
4 Aluminum sector.
4.1 For establishment of energy consumption norms and standards for designated
consumers in the Aluminum sector, the designated consumers shall be grouped based
on similar major output or product with the available data to arrive at a logical and
acceptable spread of specific energy consumption among the designated consumers
which shall be grouped as under:-
5 Iron and Steel sector.-
5.1 For Establishment of Energy consumption norms and standards in the Iron and
Steel sector, the Designated consumers are grouped based on similar characteristics
with the available data to arrive at a logical and acceptable spread of specific Energy
consumption among the designated consumers which may be grouped as under:-

5.2 The entire sector can be sub divided in the following 8 sub-sector as detailed below:
5.3 Integrated Steel Plant
A) Integrated Steel Plant:- The energy indices of the major integrated steel plants
captured from the annual reports and reported during the baseline audits
have been taken for the below calculations. The Gate to Gate Specific Energy
Consumption may be calculated as follows-
Gate to Gate Specific = Energy index of the plant Submitted to Ministry of Steel
Energy Consumption (SEC) (kcal/tone of crude steel).
As regards the total energy consumed in plant for these major integrated steel
plants, the following formula can be given-
Total Energy Consumed in Plant
Total Energy Consumption (Mkcal) = [Total Thermal Energy (Mkcal) +

{Purchased Electricity from Grid (MkWh) *860 kcal/kWh} – {Exported Electricity
to grid (MkWh) * Captive Power Plant Heat Rate kcal/kWh}].
Where, Total Thermal Energy (Mkcal) = [Fuel Quantity used (tonne) *Gross
Calorific Value of Fuel (kcal/kg)]/1000
5.4 Sponge Iron
B) Sponge Iron:- for this sub sector only those plants are considered which are
standalone sponge Iron plants with no downstream products. The gate to gate
SEC may be given as follows:
Gate to Gate Specific (Mkcal/ tonne) = Total Energy Consumption (Mkcal)/

Production of Sponge
Energy Consumption Iron (tonne)

5.5 Sponge Iron with Steel Melting Shop
C) Sponge Iron with Steel Melting Shop:- for this sub sector those plants are
considered which are sponge Iron plants with SMS (Steel Melting Shop). The
gate to gate SEC may be given as follows:
In this Group first we convert sponge iron to Steel melting shop and again
equivalent Steel Melting Shop to sponge iron as follows-
Specific Energy Consumption of Coal for sponge Iron = Tonne of Coal

Consumption/Tonne of sponge iron Electrical Specific Energy Consumption for
sponge Iron = kWH/Tonne of Sponge Iron.
Thermal Specific Energy Consumption
for Sponge Iron = {(Tonne/Tonne* Gross Calorific Value of Coal)+(kWH/Tonne)*

CPP Heat Rate kcal/kWh)}
Electrical Specific Energy Consumption for Steel Melting Shop = kWH/Tonne of

Steel Melting Shop.
Steel Melting Shop Equivalent to
Sponge Iron Production = [{(kWH/Tonne)*CPPHeat Rate}*production of Steel

melting shop] / (Total Specific Energy Consumption of Sponge Iron)
Total Equivalent Sponge Iron
Production (Tonne) = Production of Sponge Iron (Tonne) + Steel Melting Shop

production equivalent to sponge iron (Tonne)
(Gate to Gate SEC) Gate to Gate Specific Energy
Consumption (Mkcal/Tonne) = Total Energy consumed (Mkcal)/Total

Equivalent Sponge Iron Production (Tonne)
5.6 Sponge Iron with Steel Melting shops and other
D) Sponge Iron with Steel Melting Shop and others:- for this sub sector those plants
are considered which are sponge Iron plants with SMS (Steel Melting Shop) and
other products like Ferro Manganese, Silicon Magnanese, Pig Iron etc. . The gate
to gate SEC may be given as follows:
In this subsector first we convert equivalent Steel melting shop to Sponge Iron
and thereafter equivalent Ferro Alloy is converted to sponge Iron by given
formulae.

Equivalent Ferro Alloy Manganese
to Sponge Iron = [{Electrical SEC of Ferro Manganese(kWH/Tonne)*Heat

Rate}*Production of Ferro Alloy Ferro Manganese}/(Total Specific Energy
Consumption of Sponge Iron)
Equivalent Ferro Alloy
Sponge Iron Manganese to Sponge Iron = [{Electrical SEC of Sponge iron

Manganese(kWH/Tonne)*Heat Rate}*production of Ferro Alloy Sponge iron
Manganese}/(Total Specific Energy Consumption of Sponge Iron)
(Pig Iron to Sponge Iron) Equivalent Pig Iron to
Sponge Iron = [{Electrical SEC of Pig Iron (kWH/Tonne)* CPP Heat Rate}*
production of Ferro Alloy Pig Iron}/(Total Specific Energy Consumption of
Sponge Iron)
(Total Sponge Iron) Total Equivalent Sponge
Iron Production = Total energy Sponge Iron +Ferro Manganese to Sponge Iron +
Sponge Iron Manganese to Sponge Iron + Pig Iron to Sponge Iron
G to G SEC, Gate to Gate Specific Energy
Consumption = Total Energy consumed/Total Equivalent Sponge Iron

Production
5.7 Ferro Alloy
E) Ferro Alloy:-
In this Group we have converted all products as regards equivalent to Ferro

alloy (Sponge iron Manganese ) by given formula-
Equivalent Ferro Alloy Manganese to Ferro Alloy Sponge iron
Manganese = (Electrical SEC of Ferro Manganese * Production of Ferro

Manganese)/ Electrical SEC of Sponge iron Manganese)
Equivalent Ferro alloy Sponge iron Manganese
to Ferro Alloy Sponge iron Manganese = (Electrical SEC of Sponge iron

Manganese * Production of Sponge iron Manganese)/ Electrical SEC of Sponge
iron Manganese)
Equivalent Ferro Chrome to Ferro Alloy Sponge iron
Manganese = (Electrical SEC of Ferro Chrome * Production of Ferro Chrome)/

Electrical SEC of Sponge iron Manganese)

Equivalent Pig Iron to Ferro Alloy Sponge iron
Manganese = (Electrical SEC of Pig Iron * Production of Pig Iron)/ Electrical SEC
of Sponge iron Manganese)
Total Equivalent Ferro Alloy
Sponge iron Manganese Production = (Ferro Manganese to Ferro sponge iron

Manganese) + (Fe Sponge iron Manganese equivalent to Ferro Sponge iron
Manganese) + (Ferro Chrome equivalent to Ferro Sponge iron Manganese) + (Pig
Iron to Ferro Sponge iron Manganese)
Gate to Gate Specific Energy Consumption = Total Energy consumption

(Mkcal))/Total Equivalent Ferro Alloy Sponge iron Manganese Production
5.8 Ferro Chrome
F) Ferro Chrome:- The Gate to Gate SEC for this subsector is given as follows-
Gate to Gate Specific Energy Consumption
of Ferro Chrome = Total Energy Consumption (Mkcal)/Total Ferro Chrome

Production (Tonne).
5.9 Mini Blast Furnace
G) Mini Blast Furnace:- The G to G SEC for this subsector is given as follows-
of Mini Blast Furnace = Total Energy Consumption (Mkcal)/Total Production

(Tonne).
5.10 Steel Processing Unit
H) Steel Processing Units:- This subsector contributes towards the many such steel
processing plants like rerolling, wiredrawing, cold rolling, hot rolling etc.
The Gate to Gate SEC for this subsector is given as follows-
of Steel Processing Unit = Total Energy Consumption (Mkcal)/Total Production

of Steel Processing Unit (Tonne).
entitlement of energy savings certificates

6 Chlor-Alkali sector.-
6.1 For establishment of energy consumption norms and standards in the Chlor-Alkali
sector, the designated consumers shall be grouped based on similar characteristics
with the available data to arrive at a logical and acceptable spread of specific energy
consumption among the designated consumers which may be grouped as under:-
6.3 Correction factors developed for variability:
(a) Product mix
Caustic Soda 1.0 of Equivalent Caustic Soda
Liquefied Chlorine (T) 0.0615 of Equivalent Caustic Soda
Compressed Hydrogen (Lac NM3) 13.889 of Equivalent Caustic Soda
Solid Flakes (T) 0.219 of Equivalent Caustic Soda
(b) Membrane and Electrode Life
60 kWh/tonne per year is added into specific energy consumption in the

baseline year for each plant. For example:
Addition of 60 kWh per year: 60 kWh × 860 kCal (In case of Non CPP plants) × 3
years/10000000 MTOE/tonne
Addition of 60 kWh per year: 60 kWh × 2717kCal (In case of CPP plants) × 3
years/10000000 MTOE/tonne
entitlement of energy savings certificates
7 Pulp and Paper sector.-
7.1 For establishment of energy consumption norms and standards in the Pulp and Paper
sector, the designated consumers shall be grouped based on similar characteristics

with the available data to arrive at a logical and acceptable spread of specific energy
consumption among the designated consumers and the following guidelines shall be
applied to group the designated consumers based on similarity in input raw material
and product output on the basis of availability of consistent data:-
(i) The input raw materials are Wood, Agro and Recycled Fibre (RCF);
(ii) The process outputs are of Chemical Pulping, Chemi-mechanical Pulping and
100% market pulping
(iii) The product output of specialty paper, non-specialty paper and newsprint.
7.2 The groups made for Pulp and Paper sector under are:-
8 Textile sector.-
8.1 For establishment of energy consumption norms and standards in the Textile sector,
the designated consumers shall be based on similar characteristics with the available
data to arrive at a logical and acceptable spread of specific energy consumption
among the designated and the group made are as under:-

8.2 The designated consumers whose production is measured in meters of cloth, the
average grams per square meter (GSM) as 125 and average width as 44 inches shall be
assumed for weight calculations.
9 Fertilizer sector.-
9.1 In Fertilizer Sector, for manufacturing of Urea fertilizer, out of total energy consumed
at designated consumer plant boundary, stoichiometric energy of 2.53 Gcal/MT Urea
is contained in urea product and goes out as such. Thus, the net energy utilized
in urea manufacture is total energy input at designated consumers’ boundary
reduced by 2.53 Gcal/MT Urea. The figure is worked out by considering heat energy
of ammonia as 4.46 Gcal/MT Ammonia and specific consumption 0.567 MT of
Ammonia/MT Urea.
entitlement of energy saving certificates.
[F. No. 10/6/2008-EC]

Jyoti Arora, Jt. Secy.
(Note: For all practical and legal purposes, the English Version of the concerned notified Rule in
the Gazette of India will be considered as final)

PAT Booklet

Uploaded by

Copyright:

Available Formats

PAT Booklet

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PAT Booklet

Uploaded by

Copyright:

Available Formats

PAT

Perform, Achieve and Trade

2. National Mission for Enhanced Energy Efficiency 2

3. Perform, Achieve and Trade 3

4. Target Setting Methodology 4

iii. Chlor – Alkali 11

v. Iron and Steel 15

vi. Pulp and Paper 17

viii. Thermal Power Plants 21

8. Annexure 1: Notification of Targets 26

9. Annexure 2: PAT Rules 88

Bureau of Energy Efficiency 1

NMEEE – Four New Initiatives

Minimum annual energy consumption and estimated number of

Sector Minimum annual energy consumption for No. of DCs

Iron and steel 30000 67

Pulp and paper 30000 31

Thermal power plant 30000 144

Bureau of Energy Efficiency 3

Specific energy consumption (SEC) =

Sr Sector No. of Identified DCs PAT Energy Saving Targets under

Bureau of Energy Efficiency 5

Primary aluminium production is having

Bureau of Energy Efficiency 7

Bureau of Energy Efficiency 9

• Heat recovery by Provision of Brine

In chlor-alkali sector to become a designated

Bureau of Energy Efficiency 11

Bureau of Energy Efficiency 13

Specific Energy Consumption and Targets- Fertilizers

In Fertilizer Sector, for manufacturing of considering heat energy of ammonia as 4.46

The crude steel production during 2008/09

Bureau of Energy Efficiency 15

Specific Energy Consumption and Targets- Iron & Steel

vi. Pulp and Paper

Bureau of Energy Efficiency 17

Specific Energy Consumption and Targets- Pulp & Paper

Specific energy consumption varies from 0.202

Energy cost in the textile industry accounts

Bureau of Energy Efficiency 19

• Use of variable frequency drives for • Reducing warve-dia of ring spindle.

Specific Energy Consumption and Targets- Textile

Bureau of Energy Efficiency 21

Specific Energy Consumption and Targets- Thermal Power Plants

Description Mandatory Voluntary

Bureau of Energy Efficiency 23

Bureau of Energy Efficiency 25

Name, Address and State Specific Product Specific energy

Bureau of Energy Efficiency 27

(1) (2) (3) (4)

Bureau of Energy Efficiency 29

19 Sree Rayalseema Alkalies & Allied 0.333 116,716 0.312

(1) (2) (3) (4)

Bureau of Energy Efficiency 31

23. Century Rayon (A Div. of Century 0.0102 5982471 0.0101

Bureau of Energy Efficiency 33

Bureau of Energy Efficiency 35

Bureau of Energy Efficiency 37

Bureau of Energy Efficiency 39