Writing coursework can be quite challenging, especially when you're dealing with complex topics

like the C3 Coursework Example Mei. It requires a deep understanding of the subject matter, strong
analytical skills, and the ability to effectively communicate your ideas. The pressure of deadlines and
the need for precision can make the process even more daunting.

For those finding themselves overwhelmed or struggling to meet the demands of coursework,
seeking assistance can be a wise decision. ⇒ HelpWriting.net ⇔ is a resource that can provide
support and guidance. Their experienced professionals can offer valuable insights, help streamline
your thoughts, and ensure your coursework meets the required standards.

Remember, reaching out for help doesn't signify weakness but rather a commitment to producing
quality work. So, if you're navigating the challenges of coursework, consider exploring the services at
⇒ HelpWriting.net ⇔ to make the journey a bit smoother.
I repeat this until I get down to increments the size of 0.00001. The downside of the method is that it
is the most likely method of all three to fail as there is always a chance that when you rearrange an
equation and start the iterative process, it will not converge to the root but it will diverge away. To
start the process, we have to select two points on the graph visual basis. But regarding the speed of
convergence, this is relatively low as it is not completely automated and requires human interaction
after each set of results and is very repetitive. Register Number: 04666380 (England and Wales),
VAT No. 806 8067 22 Registered Office: Imperial House, 2nd Floor, 40-42 Queens Road, Brighton,
East Sussex, BN1 3XB. Then we look at where the tangent crosses the X axis and that value will be
the new x value on the graph for a tangent. The value of g'(x) at this point is far greater than 1, so the
iterations do not converge. This makes it even easier than excel but it is less accurate as it only gives
the root to 3 decimal places where as excel can be configured to as many decimal places as needed.
With the use of excel, it is every easy to write down the formula of the method in one cell and
dragging it down as many cells as you wish to (the number of iterations) and it is very easy to use.
This is not accurate enough as I want it to be to 5 decimal places. After 19 iterations, I found the root
of the equation as from then on, it repeats. But with ever growing technology, there might already
be software that solves the roots of an equation after entering the formula in. In some cases you may
not be able to differentiate f(x). So when I substitute the incremented values of x between -10 and 0
into the equation, I get the following results. To work out X 1 I will use the formula above to work
out X 1 in steps and will repeat it to find a root to 5d.p and summarise in a table. The fact that the
solution lies between -3 and -4 can also be seen in the graph. So I used the formula to work out the
values in excel. This is because the tangent crosses the asymptote, as shown below. OCR MEI Paper
3 A Level Maths Predictions Need help on what to do to improve on my a levels. This is the only
hard part of the method as the iterative part of the method is very simple with the use of the formula.
If that g’(x) 1, then we know that the function will not converge to the root but will diverge away. So
the only human interaction needed is to look at the results and manually looking at between which
two points (limits) there is a sign change and then setting the new limits as such. This repeats until
we find the root of the equation, (when x value starts repeating or reached enough significant levels).
As for the speed of convergence, it would be slower that Newton Raphson because of the extra time
needed to re-arrange the equation but it is faster than Decimal search. Upload Read for free FAQ and
support Language (EN) Sign in Skip carousel Carousel Previous Carousel Next What is Scribd. This
makes it very easy to work out the repetitive part of the method and makes the speed of convergence
much faster. If the gradient function is zero, that will mean that the denominator is 0 and that is an
impossible fraction. Full description Save Save C3 MEI A-level Maths Coursework For Later 100%
100% found this document useful, Mark this document as useful 0% 0% found this document not
useful, Mark this document as not useful Embed Share Print Download now Jump to Page You are
on page 1 of 18 Search inside document. Out of the three, some are faster at converging to the root
that others and some are easier to use than others, especially with the recent technology made
available to everyone.
Then we look at where the tangent crosses the X axis and that value will be the new x value on the
graph for a tangent. If we take a look at the Newton Raphson formula, it’s denominator is the
gradient function of f(x). Some methods give you the exact and precise answer but usually are
harder and more complex. Using Autograph is much, much simpler as you have the ability to zoom
in on the point where the signs change, i.e. the point on the X-axis, and can do so to many places.
Despite this, it is a very effective method as failure chances are relatively very low and the root can
be found to many decimal places if the right software is used. Writing the formula in a cell and
dragging it down so it is easier to calculate the y values for various points of x. This method is
slightly complex even on easy formulas, but when we get really complicated when harder formulas
are introduced. Report this Document Download now Save Save C3 MEI A-level Maths
Coursework For Later 100% (1) 100% found this document useful (1 vote) 2K views 18 pages C3
MEI A-Level Maths Coursework Uploaded by Maurice Yap AI-enhanced title Coursework on the
use of numerical methods. I repeat this until I get down to increments the size of 0.00001. A decimal
search, in contrast, just requires calculations, which can easily be done using a computer. It must still
be rearranged manually though, and a large proportion of rearrangements fail. Full description Save
Save C3 MEI A-level Maths Coursework For Later 100% 100% found this document useful, Mark
this document as useful 0% 0% found this document not useful, Mark this document as not useful
Embed Share Print Download now Jump to Page You are on page 1 of 18 Search inside document.
This will mean that the gradient function will equal to zero. Join our team of reviewers and help
other students learn. So I used the formula to work out the values in excel. But with Computers
being able to do even that, it makes it even easier to use it. So when I substitute the incremented
values of x between -10 and 0 into the equation, I get the following results. So this means that there
will be no sign changes resulting in the failure of the graph. After 19 iterations, I found the root of
the equation as from then on, it repeats. Looking at the graph you can see that the root is between -2
and -1. OCR MEI Paper 3 A Level Maths Predictions Need help on what to do to improve on my a
levels. Regarding the speed the convergence, this is by far the fastest to converge to the root and it is
also the method which fails the least out of the three different methods. I am going to use the inbuilt
function in AutoGraph to work it out initially and then I will use Excel to work the root out to more
decimal places. So using the Re- arrangement method to solve f(x), I find that the root is -
1.961703555. So the only human interaction needed is to look at the results and manually looking at
between which two points (limits) there is a sign change and then setting the new limits as such.
With the use of excel, it can be really easy to work out the values of y when you sub in the x values.
With the use of excel, it is every easy to write down the formula of the method in one cell and
dragging it down as many cells as you wish to (the number of iterations) and it is very easy to use.
But regarding the speed of convergence, this is relatively low as it is not completely automated and
requires human interaction after each set of results and is very repetitive. This repeats until we find
the root of the equation, (when x value starts repeating or reached enough significant levels). To do
this, we need to find the gradient at that point.
This will mean that the gradient function will equal to zero. To do this, we need to find the gradient
at that point. This makes it very easy to work out the repetitive part of the method and makes the
speed of convergence much faster. The diagram above shows that the gradient of g(x) is within this
range at the root which is found. So using the Re- arrangement method to solve f(x), I find that the
root is - 1.961703555. Using Autograph is much, much simpler as you have the ability to zoom in on
the point where the signs change, i.e. the point on the X-axis, and can do so to many places. Most of
the mistakes are made in this stage by humans. The Decimal search method enables you to get a very
close approximate to the real solution but more easily. The value of g'(x) at this point is far greater
than 1, so the iterations do not converge. To start the process, we have to select two points on the
graph visual basis. So this means that there will be no sign changes resulting in the failure of the
graph. Upload Read for free FAQ and support Language (EN) Sign in Skip carousel Carousel
Previous Carousel Next What is Scribd. With the use of excel, it can be really easy to work out the
values of y when you sub in the x values. Regarding the speed the convergence, this is by far the
fastest to converge to the root and it is also the method which fails the least out of the three different
methods. But with Computers being able to do even that, it makes it even easier to use it. This
repeats until we find the root of the equation, (when x value starts repeating or reached enough
significant levels). This is not accurate enough as I want it to be to 5 decimal places. Despite this, it
is a very effective method as failure chances are relatively very low and the root can be found to
many decimal places if the right software is used. This is because the tangent crosses the asymptote,
as shown below. The downside of the method is that it is the most likely method of all three to fail as
there is always a chance that when you rearrange an equation and start the iterative process, it will
not converge to the root but it will diverge away. Some computer programs, such as Autograph, can
carry out the iterations for you, which, if they are available to you, can make it easier to use than a
decimal search. This makes it even easier than excel but it is less accurate as it only gives the root to
3 decimal places where as excel can be configured to as many decimal places as needed. Register
Number: 04666380 (England and Wales), VAT No. 806 8067 22 Registered Office: Imperial House,
2nd Floor, 40-42 Queens Road, Brighton, East Sussex, BN1 3XB. So I used the formula to work out
the values in excel. I am going to use the inbuilt function in AutoGraph to work it out initially and
then I will use Excel to work the root out to more decimal places. If the gradient function is zero,
that will mean that the denominator is 0 and that is an impossible fraction. Then we look at where the
tangent crosses the X axis and that value will be the new x value on the graph for a tangent. With the
use of AutoGraph Software, It is even easier as you don’t even have to work out the gradient
function. This makes it much easier than excel but it is again less accurate as it only gives the root to
3 decimal places where as excel can be configured to as many decimal places as needed.
Register Number: 04666380 (England and Wales), VAT No. 806 8067 22 Registered Office:
Imperial House, 2nd Floor, 40-42 Queens Road, Brighton, East Sussex, BN1 3XB. Despite this, it is
a very effective method as failure chances are relatively very low and the root can be found to many
decimal places if the right software is used. But with Computers being able to do even that, it makes
it even easier to use it. Similarly to before, I used excel to work out the value of f(x). To start the
process, we have to select two points on the graph visual basis. Some methods give you the exact
and precise answer but usually are harder and more complex. I am going to use the inbuilt function in
AutoGraph to work it out initially and then I will use Excel to work the root out to more decimal
places. As for the speed of convergence, it would be slower that Newton Raphson because of the
extra time needed to re-arrange the equation but it is faster than Decimal search. It must still be
rearranged manually though, and a large proportion of rearrangements fail. So I used the formula to
work out the values in excel. The Decimal search method enables you to get a very close approximate
to the real solution but more easily. So when I substitute the incremented values of x between -10
and 0 into the equation, I get the following results. But with ever growing technology, there might
already be software that solves the roots of an equation after entering the formula in. This method is
slightly complex even on easy formulas, but when we get really complicated when harder formulas
are introduced. But regarding the speed of convergence, this is relatively low as it is not completely
automated and requires human interaction after each set of results and is very repetitive. But
whichever bit of software you use, it is hands down the easier way of finding the roots of an
equation. If that g’(x) 1, then we know that the function will not converge to the root but will
diverge away. Looking at the graph you can see that the root is between -2 and -1. With the use of
excel, it can be really easy to work out the values of y when you sub in the x values. To work out X 1
I will use the formula above to work out X 1 in steps and will repeat it to find a root to 5d.p and
summarise in a table. Care must be taken when choosing a starting value and asymptotes can cause
the method to fail. The value of g'(x) at this point is far greater than 1, so the iterations do not
converge. This makes it very easy to work out the repetitive part of the method and makes the speed
of convergence much faster. Then we look at where the tangent crosses the X axis and that value will
be the new x value on the graph for a tangent. Report this Document Download now Save Save C3
MEI A-level Maths Coursework For Later 100% (1) 100% found this document useful (1 vote) 2K
views 18 pages C3 MEI A-Level Maths Coursework Uploaded by Maurice Yap AI-enhanced title
Coursework on the use of numerical methods. So this means that there will be no sign changes
resulting in the failure of the graph. In some cases you may not be able to differentiate f(x). This
makes it even easier than excel but it is less accurate as it only gives the root to 3 decimal places
where as excel can be configured to as many decimal places as needed. If the gradient function is
zero, that will mean that the denominator is 0 and that is an impossible fraction. A decimal search, in
contrast, just requires calculations, which can easily be done using a computer.
The Decimal search method enables you to get a very close approximate to the real solution but more
easily. But with ever growing technology, there might already be software that solves the roots of an
equation after entering the formula in. This makes it much easier than excel but it is again less
accurate as it only gives the root to 3 decimal places where as excel can be configured to as many
decimal places as needed. Join our team of reviewers and help other students learn. With the use of
excel, it is every easy to write down the formula of the method in one cell and dragging it down as
many cells as you wish to (the number of iterations) and it is very easy to use. If we take a look at the
Newton Raphson formula, it’s denominator is the gradient function of f(x). But with Computers
being able to do even that, it makes it even easier to use it. So this means that there will be no sign
changes resulting in the failure of the graph. Then we look at where the tangent crosses the X axis
and that value will be the new x value on the graph for a tangent. The fact that the solution lies
between -3 and -4 can also be seen in the graph. This makes it even easier than excel but it is less
accurate as it only gives the root to 3 decimal places where as excel can be configured to as many
decimal places as needed. But whichever bit of software you use, it is hands down the easier way of
finding the roots of an equation. Out of the three, some are faster at converging to the root that
others and some are easier to use than others, especially with the recent technology made available to
everyone. OCR mega link for a level papers ocr mei or edexcel maths a level Ocr mei 2023 Predicted
papers Best textbook to self teach A level maths from best exam board to self study a levels
URGENT A level NEEDED. Writing the formula in a cell and dragging it down so it is easier to
calculate the y values for various points of x. Similarly to before, I used excel to work out the value
of f(x). Most of the mistakes are made in this stage by humans. So when I substitute the incremented
values of x between -10 and 0 into the equation, I get the following results. To start the process, we
have to select two points on the graph visual basis. If the gradient function is zero, that will mean
that the denominator is 0 and that is an impossible fraction. Despite this, it is a very effective method
as failure chances are relatively very low and the root can be found to many decimal places if the
right software is used. Looking at the graph you can see that the root is between -2 and -1. A decimal
search, in contrast, just requires calculations, which can easily be done using a computer. Some
computer programs, such as Autograph, can carry out the iterations for you, which, if they are
available to you, can make it easier to use than a decimal search. This is because the tangent crosses
the asymptote, as shown below. After 19 iterations, I found the root of the equation as from then on,
it repeats. This will mean that the gradient function will equal to zero. The value of g'(x) at this point
is far greater than 1, so the iterations do not converge. OCR MEI Paper 3 A Level Maths Predictions
Need help on what to do to improve on my a levels. To work out X 1 I will use the formula above to
work out X 1 in steps and will repeat it to find a root to 5d.p and summarise in a table.