Writing a coursework, especially on a technical subject like resistivity, can be a challenging task.

It
requires a deep understanding of the topic, thorough research, analytical skills, and the ability to
present the information in a structured and coherent manner. Resistivity coursework, in particular,
may involve complex mathematical calculations, experimental data analysis, and a comprehensive
literature review.

Students often face difficulties in managing their time effectively, conducting experiments,
interpreting results, and synthesizing information from various sources. Additionally, the pressure of
meeting deadlines and ensuring the coursework meets academic standards can add to the stress.

While seeking external assistance can be a tempting option, it's essential to consider the ethical
implications of using online services. Ordering coursework from websites like ⇒ HelpWriting.net
⇔ may provide a quick solution, but it may compromise the learning process and academic integrity.
It's advisable for students to approach coursework with a positive mindset, seeking help from
teachers, classmates, or academic resources available within their institutions. These avenues can
provide valuable support, guidance, and constructive feedback, fostering a better understanding of
the subject matter.

If students find themselves overwhelmed, it's recommended to reach out to their professors or
academic advisors for assistance. They may also explore legitimate tutoring services or study groups
to enhance their comprehension of the coursework.

Ultimately, the challenges of coursework are part of the learning experience, contributing to the
development of critical thinking and problem-solving skills. Ordering coursework from external
sources may provide a temporary solution, but it's crucial to prioritize genuine learning and academic
growth.
After that, I will sand the wire to get rid of any wax coated on it. As the wire becomes hotter, the
ions vibrate more which makes it more difficult for electrons to pass so the resistance has increased.
This is because more free electrons will be able to flow in the thicker wires. They’re more accurate
because the values are given to 2 decimal places. This would make my results more reliable because
there wouldn’t be any heat left in the wire to increase resistance. It is possible to devise an electrical
resistivity formula. This resource hasn't been reviewed yet To ensure quality for our reviews, only
customers who have purchased this resource can review it Report this resource to let us know if it
violates our terms and conditions. I also used a digital ammeter and voltmeter to get more accurate
results. See other similar resources ?0.00 (no rating) 0 reviews Download Save for later Not quite
what you were looking for. This resource hasn't been reviewed yet To ensure quality for our reviews,
only customers who have downloaded this resource can review it Report this resource to let us know
if it violates our terms and conditions. Our customer service team will review your report and will be
in touch. ?3.00 (no rating) 0 reviews BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY
NOW Save for later Last updated 27 June 2019 Share this Share through email Share through twitter
Share through linkedin Share through facebook Share through pinterest Science Geeks Shop 4.59 25
reviews Not the right resource. Upload Read for free FAQ and support Language (EN) Sign in Skip
carousel Carousel Previous Carousel Next What is Scribd. Students will have to be happy with
converting units, manipulating the formula and determining resistivity through practical methods
before use and extension tasks are provided for those pesky more able students. Feb 2010 Resistance
of a wire data analysis coursework help for Charter School year 10 How to complete the experiment.
Also, the steeper the lines are means the higher the resistance. Resistance of a Wire - GCSE Physics
Coursework - Resistance of a Wire different materials have different resistance, nichrome is the good
conductor of. Nichrome wire has relatively higher resistance levels to prevent the material beneath
the wire from oxidizing, which prevents the wire inside from burning or. In addition I finally
conclude that the formula is genuine and works. An Investigation Into the Resistance of a Wire -
GCSE? Join our team of reviewers and help other students learn. Not all materials are created equal
in terms of their conductive ability. As physics coursework materials presentation Busy market essay
FC! Furthermore, after recording a reading, I could turn the power pack off to allow the copper wire
to cool down. It is designed to be printed two pages to a page and flip on short edge to form a
booklet that students can then stick in their books. The variables in this investigation are voltage (V),
resistance (R) and length of Nichrome wire (L) Resistance and length are directly proportional to
each other. I will be keeping the temperature of the wire fairly the same for each of my readings.
Write a review Update existing review Submit review Cancel It's good to leave some feedback. Also,
the anomaly clearly sticks out and doesn’t go with the trend line. Then the resistance can be
calculated using the formula with the two meter readings. Feb 2010 Resistance of a wire data
analysis coursework help for Charter School year 10 How to complete the experiment.
Resistance of a Wire - GCSE Physics Coursework - Resistance of a Wire different materials have
different resistance, nichrome is the good conductor of. Tes classic free licence Reviews Select
overall rating (no rating) Your rating is required to reflect your happiness. Resistance of a Wire -
GCSE Physics Coursework - Resistance of a Wire different materials have different resistance,
nichrome is the good conductor of. Dec 2016 Free GCSE physics coursework essay 1 voltmeter (to
measure voltage); 5 x wires; 2 crocodile clips; Power pack; 100cm nichrome wire. This is because
more free electrons will be able to flow in the thicker wires. Sanding it takes off the wax but I could
also sand off the copper, making it thinner. Also, using copper wire that isn’t waxed could help
because I wouldn’t need to sand it. An experiment to find the resistivity of nichrome - GCSE? It is
designed to be printed two pages to a page and flip on short edge to form a booklet that students can
then stick in their books. These collisions oppose the flow of electrons and therefore, the wire has
resistance. L which is required to be a straight line through the origin. Join our team of reviewers and
help other students learn. Write a review Update existing review Submit review Cancel It's good to
leave some feedback. The ions in the connate water come from the dissociation of salts. Our
customer service team will review your report and will be in touch. ?0.00 3.00 1 review Download
Save for later ?0.00 3.00 1 review Download Save for later Last updated 19 April 2010 Share this
Share through email Share through twitter Share through linkedin Share through facebook Share
through pinterest iop 3.76 505 reviews Not the right resource. It is specifically linked to the OCR
Physics A Specification, but should apply to most A Level Physics courses. Our customer service
team will review your report and will be in touch. ?5.00 (no rating) 0 reviews BUY NOW Save for
later ?5.00 (no rating) 0 reviews BUY NOW Save for later Last updated 14 September 2020 Share
this Share through email Share through twitter Share through linkedin Share through facebook Share
through pinterest PeteRiley 4.75 24 reviews Not the right resource. This is the same with water
flowing through a big pipe. Extended experimental investigation Electricity - QCAA pdf. Then the
resistance can be calculated using the formula with the two meter readings. Because of the factors
that affect the resistance above, I will have to keep the temperature the same and the type of wire the
same. Some materials are better conductors than others and offer less resistance to the flow of
electrons. Tes classic free licence Review 3 Select overall rating (no rating) Your rating is required to
reflect your happiness. For this investigation, I am going to use copper wire and electricity to test the
resistance. Resistivity depends in addition upon the geometry of the sample. Investigating The
Resistance of Nichrome - Investigating The Resistance of of coursework, I have been finding out
factors that affect the resistance of a wire. As these free electrons move through the wire, they
collide with metal ions that are vibrating. The resistivity values (ohm m) of the materials used:
Copper 1 68 x 10?8 Nichrome 1 1 x 10?6 to 1 5 x 10?6 (value of 1 0 x 10?6 taken in this
investigation). Extended experimental investigation Electricity - QCAA pdf. The resistivity values
(ohm m) of the materials used: Copper 1 68 x 10?8 Nichrome 1 1 x 10?6 to 1 5 x 10?6 (value of 1 0
x 10?6 taken in this investigation).
It is designed to be printed two pages to a page and flip on short edge to form a booklet that
students can then stick in their books. This means that for the thinner pieces of wire, less current
flows. Some materials are better conductors than others and offer less resistance to the flow of
electrons. It is possible to devise an electrical resistivity formula. Then the sheet goes on to explain
each section in detail along with examples. I am going to use callipers because they are accurate to 2
decimal places which make it more accurate. The ions in the connate water come from the
dissociation of salts. As physics coursework materials presentation Busy market essay FC! These
collisions oppose the flow of electrons and therefore, the wire has resistance. It comes COMPLETE
WITH ANSWERS to all questions to encourage self assessment or simply to reduce your marking
burden. See other similar resources ?5.00 (no rating) 0 reviews BUY NOW Save for later Not quite
what you were looking for. The variables in this investigation are voltage (V), resistance (R) and
length of Nichrome wire (L) Resistance and length are directly proportional to each other. The
callipers also give readings accurate to 2 decimal places which make my results more accurate. This
means that the resistance increases as the current increases because the metal filament gets hotter. A
S Physics Practical Coursework Resistance of Nichrome Wire Marked by Teachers. However, one of
the trend lines does not support the theory and my prediction. It has a very high resistance when it is
in reverse. After that, I will sand the wire to get rid of any wax coated on it. Dec 2016 Free GCSE
physics coursework essay 1 voltmeter (to measure voltage); 5 x wires; 2 crocodile clips; Power pack;
100cm nichrome wire. See other similar resources ?3.00 (no rating) 0 reviews BUY NOW Save for
later Not quite what you were looking for. Feb 2010 Resistance of a wire data analysis coursework
help for Charter School year 10 How to complete the experiment. Dec 2016 Free GCSE physics
coursework essay 1 voltmeter (to measure voltage); 5 x wires; 2 crocodile clips; Power pack; 100cm
nichrome wire. Therefore the maximum heat per second produced is given by. An Investigation Into
the Resistance of a Wire - GCSE? Extended experimental investigation Electricity - QCAA pdf. The
problem could be that I didn’t measure the thickness correctly and didn’t set the callipers to 0 before
I measured the copper wire. This is due to the fact that the free electrons will have more room to
move so it will travel faster. As physics coursework materials presentation Busy market essay FC!
Our customer service team will review your report and will be in touch. ?3.00 (no rating) 0 reviews
BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY NOW Save for later Last updated 27
June 2019 Share this Share through email Share through twitter Share through linkedin Share through
facebook Share through pinterest Science Geeks Shop 4.59 25 reviews Not the right resource.
This means that for the thinner pieces of wire, less current flows. Nichrome wire has relatively higher
resistance levels to prevent the material beneath the wire from oxidizing, which prevents the wire
inside from burning or. It is specifically linked to the OCR Physics A Specification, but should apply
to most A Level Physics courses. Feb 2010 Resistance of a wire data analysis coursework help for
Charter School year 10 How to complete the experiment. It has a very high resistance when it is in
reverse. However, I had a hard time getting a decent set of results and the 0.704mm thickness does
not fit pattern and theory. Feb 2010 Resistance of a wire data analysis coursework help for Charter
School year 10 How to complete the experiment. An experiment to find the resistivity of nichrome -
GCSE? The variables in this investigation are voltage (V), resistance (R) and length of Nichrome
wire (L) Resistance and length are directly proportional to each other. Investigating The Resistance
of Nichrome - Investigating The Resistance of of coursework, I have been finding out factors that
affect the resistance of a wire. An experiment to find the resistivity of nichrome - GCSE? Tes classic
free licence Reviews Select overall rating (no rating) Your rating is required to reflect your
happiness. See other similar resources ?0.00 (no rating) 0 reviews Download Save for later Not quite
what you were looking for. Investigating The Resistance of Nichrome - Investigating The Resistance
of of coursework, I have been finding out factors that affect the resistance of a wire. The variables in
this investigation are voltage (V), resistance (R) and length of Nichrome wire (L) Resistance and
length are directly proportional to each other. The resistivity values (ohm m) of the materials used:
Copper 1 68 x 10?8 Nichrome 1 1 x 10?6 to 1 5 x 10?6 (value of 1 0 x 10?6 taken in this
investigation). Some materials are better conductors than others and offer less resistance to the flow
of electrons. This is the same with water flowing through a big pipe. A S Physics Practical
Coursework Resistance of Nichrome Wire Marked by Teachers. Then I will use the callipers to
measure the thickness of the wire. Also, the steeper the lines are means the higher the resistance. It
comes COMPLETE WITH ANSWERS to all questions to encourage self assessment or simply to
reduce your marking burden. As physics coursework materials presentation Busy market essay FC!
Furthermore, after recording a reading, I could turn the power pack off to allow the copper wire to
cool down. Our customer service team will review your report and will be in touch. ?3.00 (no rating)
0 reviews BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY NOW Save for later Last
updated 27 June 2019 Share this Share through email Share through twitter Share through linkedin
Share through facebook Share through pinterest Science Geeks Shop 4.59 25 reviews Not the right
resource. My prediction is correct and my results support the theory because the theory is: the thicker
the wire, the more free electrons will be able to flow. Investigating The Resistance of Nichrome -
Investigating The Resistance of of coursework, I have been finding out factors that affect the
resistance of a wire. When I pass electricity through a copper wire, resistance is created which slows
down the flow of electrons. This resource hasn't been reviewed yet To ensure quality for our reviews,
only customers who have downloaded this resource can review it Report this resource to let us know
if it violates our terms and conditions. The only thing is that it doesn’t curve as much as the one
above.