Scribd Logo
Upload

Welcome to Scribd!

  • 214 views

    Cargo Handling Simulator Course

    Uploaded by

    Panagiwtis M.
    This document outlines a 5-day training course on oil tanker cargo and ballast handling operations. The course aims to help deck officers safely and environmentally soundly handle cargo and ballast operations. It will use simulators and classrooms to teach topics like cargo calculations, inert gas systems, loading/discharging, and tank cleaning. Each day focuses on different topics and includes lectures, exercises on the full-mission simulator, and discussions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cargo Handling Simulator Course

    Uploaded by

    Panagiwtis M.
    214 views5 pages
    This document outlines a 5-day training course on oil tanker cargo and ballast handling operations. The course aims to help deck officers safely and environmentally soundly handle cargo and ballast operations. It will use simulators and classrooms to teach topics like cargo calculations, inert gas systems, loading/discharging, and tank cleaning. Each day focuses on different topics and includes lectures, exercises on the full-mission simulator, and discussions.

    Original Title

    cargo-handling-simulator-course

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines a 5-day training course on oil tanker cargo and ballast handling operations. The course aims to help deck officers safely and environmentally soundly handle cargo and ballast operations. It will use simulators and classrooms to teach topics like cargo calculations, inert gas systems, loading/discharging, and tank cleaning. Each day focuses on different topics and includes lectures, exercises on the full-mission simulator, and discussions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    214 views5 pages

    Cargo Handling Simulator Course

    Uploaded by

    Panagiwtis M.
    This document outlines a 5-day training course on oil tanker cargo and ballast handling operations. The course aims to help deck officers safely and environmentally soundly handle cargo and ballast operations. It will use simulators and classrooms to teach topics like cargo calculations, inert gas systems, loading/discharging, and tank cleaning. Each day focuses on different topics and includes lectures, exercises on the full-mission simulator, and discussions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    “OIL TANKER

    CARGO & BALLAST HANDLING SIMULATOR”

    5-DAY TRAINING COURSE


    • OVERALL AIM

    It is a practical and theoretical Training Course, aimed at helping the participating Masters and
    Deck Officers to make a more effective contribution to the safe and environmentally-sound oil
    tanker cargo and ballast handling operations. The Training Course has been designed according
    to the IMO Model Course 2.06 “Oil Tanker Cargo and Ballast Handling Simulator”. The cargo
    related calculations and the simulator exercises constitute the most important and extensive part
    of the course.

    • LEARNING OBJECTIVES

    On completing the course, the Trainees, will:

    - Have acquired a greater awareness of the proper pre-planning, use of the Ship-Shore
    Safety Checklist and of the implementation of safe procedures during loading/discharge
    of crude oil and petroleum products.

    - Be able to take precautions to prevent cargo-generated flammability, electrostatic and


    toxicity hazards.

    - Be able to prepare, perform and monitor all cargo operations, including inerting and gas-
    freeing, tank cleaning operations and crude oil washing.

    © Athina MLDC 1 Revision 1/2019


    - Have acquired experience in identifying operational problems and making decisions to
    solving them.

    - Be better familiar with the cargo handling equipment, instrumentation, devices and alarms.

    • FACILITIES

    The Training Course will take place at the ATHINA Maritime Learning and Development Center’s
    K-Sim Liquid Cargo Full-Mission (Class A) and Desk-Top (Class C) Simulators and in the specially
    designed Loading Instrument – Familiarization Classroom. The Full-Mission Simulator consists of
    a Centralized Cargo Control Room with all necessary consoles and instrumentation including an
    Oil Discharge Monitoring and Control System, Overfill Devices, an on-line loading, stress and
    stability instrument, Inert Gas Panel and a fixed gas detection system. A special compartment
    simulates the shore loading/discharging terminal station and local deck post stations.

    OIL TANKER
    CARGO & BALLAST
    HANDLING SIMULATOR

    © Athina MLDC 2 Revision 1/2019


    • DAILY SCHEDULE

    09:30 – 09:45 Introduction, Learning Objectives


    09:45 – 10:00 Pre-Training Questionnaire
    Properties of Crude Oil and Petroleum Products
    Nature and origin of Crude Oil
    Upstream production and Petroleum Products
    10:00 – 11:00 Basics of Distillation and Cracking Processes
    Physical and Chemical Properties of Hydrocarbons
    11:00 – 11:20 Coffee Break
    Cargo Tanks Atmosphere – Content – Measurement –
    Gasses Layering in Tank
    Flash Point
    Flammability Composition Diagram
    11:20 – 12:00 Toxicity (TLV, TWA – STEL Definitions)
    Benzene, Hydrogen Sulfide - Sources and Levels
    Inert Gas Composition
    Type of Oil Tankers, Types of Cargo Pumps, Pumps’
    DAY 1 Operation Theory
    12:00 - 13:00 Steam Turbine and FRAMO Pumps
    Pumps Performance Curves
    13:00 – 14:00 Lunch Break
    Familiarization with the LCHS Simulators
    No. 1 Exercise “Open Hatches – Leaving the Dry Dock”
    14:00 – 15:00
    15:00 – 15.20 Coffee Break
    Familiarization with the LCHS Simulators (continued)
    15:20 – 16:30 No. 1 Exercise “Open Hatches – Leaving the Dry Dock”

    © Athina MLDC 3 Revision 1/2019


    09:30 – 09:45 Day 1 Recap – Schedule of 2nd Day Training Activities

    Ship Particulars, Working with Tables and Plans -


    Calculations
    09:45 – 11:00 Cargo Calculations
    Parallel Body Calculation
    DWA Calculation

    11:00 – 11:20 Coffee Break


    Familiarization with the Loading Instrument
    DAY 2 11:20 – 13:00
    Stability Analysis (GZ – Theta Curve) Stability Criteria
    No.2 Exercise “Loading for Specific Arrival Draft”

    13:00 – 14:00 Lunch Break


    No.3 (Simulator) Exercise
    14:00 – 15:00 “Initial Inerting – Preparation for Loading Operation”

    15:00 – 15.20 Coffee Break


    No.4 Exercise
    15:20 – 16:30 “Discharging High Temperature Fuel Oil in Cold Sea”

    09:30 – 09:45 Day 2 Recap – Schedule of 3rd Day Training Activities

    Planning of Fuel Oil Conventional Loading 25%, 50%,


    09:45 – 11:00 75% 100%

    11:00 – 11:20 Coffee Break

    11:20 – 12:00 Preparation of SQ/03


    No.5 (Simulator) Exercise
    DAY 3 12:00 – 13:00 “Arrival in Ballast Condition – Commence Loading”

    13:00 – 14:00 Lunch Break


    14:00 – 14:30 Topping Up – Finalization of Loading

    14:30 – 15.00 No.6 (Simulator) Exercise


    “Loading Operation from 70%”
    15:00 – 15.20 Coffee Break
    15:20 – 16:30 No.6 (Simulator) Exercise (continued)
    “Loading Operation from 70%”

    © Athina MLDC 4 Revision 1/2019


    09:30 – 09:45 Day 3 Recap – Schedule of 4th Day Training Activities

    Ship – Shore Safety Checklist


    Laden Passage Tank Pressure Management
    09:45 – 11:00 Means of Venting
    Arrival to Discharging Port – Cargo Calculations

    11:00 – 11:20 Coffee Break


    Discharge Rates, Predictions
    DAY 4 11:20 – 12:00 Review of Pumps Performance Diagrams
    12:00 – 13:00 No.7 (Simulator) Exercise
    “Start Discharging”

    13:00 – 14:00 Lunch Break


    No.7 (Simulator) Exercise (continued)
    14:00 – 15:00 “Start Discharging”

    15:00 – 15.20 Coffee Break


    15:20 – 16:30 No.8 (Simulator) Exercise
    “Stripping and COW Exercise”

    09:30 – 09:45 Day 4 Recap – Schedule of 5th Day Training Activities

    09:45 – 11:00 Vessel Experience Factor, Gas Freeing Precautions


    Air Purging
    11:00 – 11:20 Coffee Break
    Ballast Water Treatment Systems – On Overview to their
    11:20 – 12:00 Operation Principles
    (Case Studies - ElectroChlronination & Ozone Production)
    12:00 – 13:00 No.9 (Simulator) Exercise
    DAY 5 “Full Tank Cleaning Operation”
    13:00 – 14:00 Lunch Break
    14:00 – 15:00 Simulator Exercise No.6 (continued)
    “Full Tank Cleaning Operation”
    15:00 – 15.20 Coffee Break
    15:20 – 16:30 No.10 (Simulator) Exercise
    “Final Loading with 75000 BBLS Notice”

    16:30 – 17:00 Evaluation of Course – Closing

    © Athina MLDC 5 Revision 1/2019

    You might also like