Writing coursework, especially for subjects like GCSE Resistant Materials, can be a challenging task.

It requires a combination of research, critical thinking, creativity, and effective communication skills.
Students are often expected to demonstrate a deep understanding of the subject matter, apply
theoretical concepts to practical situations, and present their findings in a coherent and well-
organized manner.

GCSE Resistant Materials coursework, in particular, may involve designing and creating products,
conducting experiments, analyzing materials, and documenting the entire process. This can be time-
consuming and demanding, especially when considering the need for precision and attention to
detail.

For those who find themselves struggling with coursework, seeking assistance can be a viable
option. ⇒ HelpWriting.net ⇔ is a platform that offers support in academic writing, providing
custom coursework solutions. Ordering from such a service can help students alleviate the stress
associated with coursework, ensuring they receive a professionally written and well-researched paper.

However, it's important for individuals to approach external help responsibly and ethically. While
services like ⇒ HelpWriting.net ⇔ can be beneficial for guidance and support, students should
prioritize their own learning and use these resources as supplementary aids rather than as a substitute
for their own efforts.

In conclusion, writing GCSE Resistant Materials coursework can be challenging, and seeking help
from platforms like ⇒ HelpWriting.net ⇔ can be a reasonable option for those who need
assistance. Remember to use such services responsibly and in conjunction with your own academic
efforts.
This has a big effect on the weight distribution which affects the steering and the manoeuvrability of
the car. GCSE Design and Technology: Resistant materials (4562) Controlled Assessment Tasks and
Guidance Introduction to your Resistant Materials Coursework. There would also be wheels and
metal parts for the steering, roll bar, and wheel components. 12 mm plywood would be used for most
of the chassis. He suggested that mounting the cassette on the motor shaft would work with a
derailleur shifting the gears around. So I have adopted a system that is similar to Richard Lander and
vaguely to Rotary Racers (No.1 in the country). This uses a handlebar which is welded to a steering
shaft. This contributes to the lightness of the car which is about 25 kg without batteries and motor.
Reviews Select overall rating (no rating) Your rating is required to reflect your happiness. Drivers
may not kneel, sit astride a seat, or lie down in any way such that their chests and head are forward
of their waist. T6.4. There must be a solid floor under the whole of the driver. T10.4. The vehicle
must be fitted with a minimum four fixing point, 50mm width safety harness, with secure fixing
points on the roll bar or chassis. This allows the school to use the Greenpower car as part of the
curriculum. He sees a main structure which has two 4x2 wooden posts on either side of the car. As
the shoulders are a lot wider then the hips and legs, I make the space around the legs a lot thinner.
University of York, Heslington, York Y010 5DD 01904 328300 STEM Google play apps STEM
Apple store apps. GCSE Design and Technology: Resistant materials (4562) Controlled Assessment
Tasks and Guidance Introduction to your Resistant Materials Coursework. This idea uses the space
beside the legs to fit the wheels in. This didn’t do me any favour as I then had to make the hole
bigger so the slot can go in. In order for my car to be able to fit a normal human being, I need one in
my car, so I downloaded a man from the internet and inserted him into my car. This will reduce costs,
increase manufacturing accuracy, and keep material waste to a minimum. An easily handled car will
be quicker and cause less driver fatigue. We hope you have an informative and interesting evening. I
wanted it to be shallower, thinner in order to have less frontal area and as you can see in the pictures
that it is. Powerpoint so can be used on the board or printed as a series of activities and worksheets.
Reviews Select overall rating (no rating) Your rating is required to reflect your happiness. Steering is
something that has to be considered with the shape of the body. The car will be largely built from
wood, to promote the sustainability and ecological ethos of the Greenpower organisation. GCSE
Resistant Materials 2012 gadget tidy pdf 2012 low voltage light pdf 2012 mp3 dock pdf 2013 GCSE
RM art deco cabinet pdf 2013 GCSE RM jewlery. Data Handling GCSE coursework. Hypothesis.
Data Handling GCSE coursework. Hypothesis. Data Handling GCSE coursework. See other similar
resources ?2.00 5.00 1 review BUY NOW Save for later Not quite what you were looking for. I
didn’t choose this idea because it wasn’t practical and it has a aerodynamic disadvantage. The only
use of the extra degree of steering, is navigating around the Greenpower paddock and the pit-lane
and getting out of the classroom. He then gave me a sheet which explained the point that he was
trying to make.
About CGP Infrequently Asked Questions Jobs coursework CGP. We are coursework of all the rules,
which are to be maintained for creating term helps. I used my research to determine what was
needed for my car and what it didn’t need. The left picture shows what my basic idea was turned
into and then the right picture shows the near completed car. It also had to be reasonably competitive
at the national final, achieving a top 15 place. Raptor Fusion, the Penair Car, uses side sticks in order
to reduce the height of the car. This is an easy way of doing the motor, roll bar and back cross axle.
That would be linked with two track rods, one for each wheel. This arrangement is being used by
many cars on the grid and it’s the most simplest way of doing it. What processes could you use to
make the real thing. BRIDLE MORTISE AND TENON The joint on the left is an easy to make
common woodworking joint that is usually seen in furniture. One after school session that I have
attended, I manage to screw and glued the battery box into the base. This is simply another piece of
12mm plywood glued and screw to the base. I chose to use a solvent-based paint to protect the
chassis. GCSE Design and Technology: Resistant materials (4562) Controlled Assessment Tasks and
Guidance Introduction to your Resistant Materials Coursework. Using aircraft style handle you
would push and pull to rotate the wheels. All of the loose parts in the car such as the body can
amplify the vibration. What finishes would you use to make the real thing. Hey all, the deadline for
my resistant materials coursework is really It s for gcse but it helps a bit you just need to write lods
and lods more. I have worked part-time at I.C.E. We discussed his ideas for a light, easily built
chassis. The only concern is that the way that the glue works, it reacts with moisture and therefore it
foams out of the joints. The epoxy resin helps to the make the car lighter as well. The car has a 11
metres turning circle so it’s more manoeuvrable than a ordinary car. This is done by a free rolling
shaft that has 2 gears on it. Name Candidate Number Walkden High School: 33383 OVERALL
DEADLINE: Feb 14 th 2014. According to the testimonials of students, they feel resistant being
overloaded with college materials. Get this resource as part of a bundle and save up to 61% A
bundle is a package of resources grouped together to teach a particular topic, or a series of lessons, in
one place. See other similar resources ?11.99 (no rating) 0 reviews BUY NOW Save for later Not
quite what you were looking for. Nathaniel Olson GCSE Resistant Materials Inspiration Rotary
Racer Nathaniel Olson GCSE Resistant Materials Inspiration 2 Richard Lander Racing The back end
is what I am interested in. I would use a state of art router to machine all of the pieces with super
accuracy.
Also there would be one end of another trackrod attached to the kingpost of the one wheel and the
handle that is on the same side and would be the same for the other side. It had to be simple to make
and environmentally friendly. Nathaniel Olson GCSE Resistant Materials Joints The joint on the left
is a good permanent effective joint. I founded a place in Falmouth that can cut a full sheet of
plywood for a reasonable price. Your coursework needs to be 2000 words, and typed copies must be
handed in. The track is very big and has big corners that does not require a great degree of turning.
Study Guides Understand coursework resistant topics in IB with our teacher written Study Guides
Learn more. I have had several opinions about my design from other teams and schools and how to
improve it. Y9 Choices - Most helps are gcse JFK but some are organised with other schools or West
Herts College How to Write a First Person Essay. This affects the overall size of the body and
chassis. Knowledge, skills and understanding developed during GCSE Design and Technology:
Resistant Materials - Unit 2 (4560), for exams from June 2010. Match the manufactured board with
the explanation. A. B. C. D. E. 2. Resistant Materials Revision Quiz. He sees a main structure which
has two 4x2 wooden posts on either side of the car. This inserts into the jagged teeth on the left and
makes a adjustable seat. Come and visit the National STEM Learning Centre library to see it. The
electric will be almost identical to our school’s car which is simple as it gets, but it will have a motor
controller which would a circuit controlling the solid state relay. We also used the wood as a board
where we can fit electrical wires and devices. Write a review Update existing review Submit review
Cancel It's good to leave some feedback. A 6mm hole should be drilled through the base of the seat
to allow height measurement. Write a review Update existing review Submit review Cancel It's good
to leave some feedback. Save now recycled european square outdoor dining table chocolate brown
with. Ideal as end of topic tests, exam revision tools, homeworks or for cover lessons. When I
showed it to other students in the school, my car wasn’t completed as I didn’t have the roll bar and
the steering in it. When putting all the pieces together, it became apparent that the slots would go
together in a perfect world without any expansion or warping of the wood. He then gave me a sheet
which explained the point that he was trying to make. We strive to protect the interests of our
customers. GCSE Design and Technology: Resistant materials (4562) Controlled Assessment Tasks
and Guidance Introduction to your Resistant Materials Coursework. Name Candidate Number
Walkden High School: 33383 OVERALL DEADLINE: Feb 14 th 2014. Plan of Make Nathaniel
Olson GCSE Resistant Materials Plan of Make 2 Nathaniel Olson GCSE Resistant Materials Plan of
Make 3 Nathaniel Olson GCSE Resistant Materials Instruction Manual As this is a kit car that can be
sold in the shops, it would need a instruction manual of how to build the car.
All of the loose parts in the car such as the body can amplify the vibration. Media Studies 2, Gcse
Social studies 5, All University Degree Subjects 35, You're using the Internet Explorer 6 browser to
view the BBC website. The tabs that controls the steering wasn’t needed on the front kingposts as it
would be moved. Review 5 Select overall rating (no rating) Your rating is required to reflect your
happiness. The main point that he was trying to make is that the aerodynamics is vital and making a
light car is although important, but it doesn’t affect the car in the way that aerodynamics does. When
putting all the pieces together, it became apparent that the slots would go together in a perfect world
without any expansion or warping of the wood. The parts that are being cut out on the right are the 2
middle sections, bulkhead and 1 side piece. This car has a lot more steering than is required in
Greenpower racing. This presentation is being updated all the time so make sure you come back and
check regularly to see the updates. See other similar resources ?18.00 (no rating) 0 reviews BUY
NOW Save for later Not quite what you were looking for. Also for the steering shaft holder will be
made out of hardwood. Please essay writing company testimonials a valid email address. Nothing too
in-depth but a quick recap on virtually all the materials they might come across in coursework and in
the exam. ?3.50 Reviews Select overall rating (no rating) Your rating is required to reflect your
happiness. Each slide contains easy to read basic information about each material with examples of
names, properties and uses. Greenpower is a charitable organisation that runs a series of races in the
UK for school-built electric cars. To be designed to take advantage of modern computer controlled
manufacturing techniques such CNC routing and waterjet cutting. Although aerodynamics is
important, keeping the weight low is worth doing. This is my target market; a kit-built car for
schools that could campaign a car and make modifications, but want a sound base to work from.
Steering is something that has to be considered with the shape of the body. It is sitting on rails so
when the driver gets out, they slide the battery box out and change the batteries. He sees a main
structure which has two 4x2 wooden posts on either side of the car. The cross axle were designed to
be welded on a tricycle. I have worked part-time at I.C.E. We discussed his ideas for a light, easily
built chassis. B-Wheel Alignment Socket Cap M8 20mm (X2) NylockNut M8 (X2) M8 Washer (X4)
Motor Socket Cap M8 50mm?? (X4) Nylock Nut M8 (X4) Washer. Knowledge, skills and
understanding developed during GCSE Design and Technology: Resistant Materials - Unit 2 (4560),
for exams from June 2010. Get this resource as part of a bundle and save up to 90% A bundle is a
package of resources grouped together to teach a particular topic, or a series of lessons, in one place.
Knowledge, skills and understanding developed during GCSE Design and Technology: Resistant
Materials - Unit 2 (4560), for exams from June 2010. The wheels positions are important as they
determinate the weight distribution and manoeuvrability of the car. Skip to content Essayped —
Essay writing service Quality papers at the help prices. When you turn the handlebar, the shaft
rotates and moves the plate side to side. 2 arms are bolted to the plate and the ends of each arms will
be attached to the wheels.