Writing coursework, especially in subjects like Resistant Materials for GCSE, can be a challenging

and time-consuming task. It requires a deep understanding of the subject, research skills, and the
ability to articulate thoughts and ideas effectively. Here are some reasons why writing Resistant
Materials GCSE coursework can be difficult:

1. Technical Knowledge: Resistant Materials involves understanding materials, processes, and

techniques. A strong grasp of technical concepts and the ability to apply them in coursework
is essential.
2. Research: Comprehensive research is crucial to gather relevant information and data for the
coursework. This includes studying materials, manufacturing processes, and existing designs.
3. Creativity: Generating innovative ideas and designs is a key aspect of Resistant Materials
coursework. This requires creative thinking and problem-solving skills to come up with
unique and practical solutions.
4. Practical Skills: In some cases, the coursework may involve practical work or the creation of
prototypes. Executing these tasks effectively adds an additional layer of complexity.
5. Time Management: Balancing coursework with other academic and extracurricular activities
can be challenging. Meeting deadlines and managing time efficiently is crucial for producing
high-quality coursework.

For those finding it challenging to complete their Resistant Materials GCSE coursework, seeking
assistance can be a viable option. Platforms like ⇒ HelpWriting.net ⇔ may provide professional
help with academic assignments. However, it's important to approach such services with caution.
Ensure that the service is reputable, trustworthy, and provides original content. Additionally, it's
essential to use external assistance as a learning aid rather than as a substitute for personal
understanding and effort.

Remember, while seeking help can provide support, the primary goal of coursework is to enhance
your understanding of the subject and develop essential skills. Use external assistance responsibly
and make sure to learn from the process.
Coursework and controlled assessment components assess candidates skills, you will be able to
submit marks right up to the deadline; a reduction in the. I have received good feedback saying the
car is very good overall. Advantages: You can very easily change the shape or add parts onto it. I
have found out numerous things about my initial idea, how some of it will work and some of it
won’t. The motor and batteries would be mounted on a partition that hangs from the posts. It is also
important to keep the weight out of the end of the car, as it affects the handling (how quickly the car
can turn and how easy it is on it’s tyres) and how the car handles bumps (weight in the ends can
cause pitching, which can change the loading on the wheels) Then he went on about the importance
of aerodynamics compared to the importance of weight of the car. GCSE Design and Technology:
Resistant materials (4562) Controlled Assessment Tasks and Guidance Introduction to your
Resistant Materials Coursework. Then I would use a electric hand drill to do the rest. It is also
durable as it should last for half of a decade of racing. Manufacturing Processes: Sand paper, square
files, electric drills, Router. We hope you have an informative and interesting evening. All of our
Edexcel GCSEs have a raw mark grade boundary A raw mark is the actual Design and Technology -
Resistant Materials Technology Unit grade. Pack of two practice examination papers for GCSE
Design and Technology: Resistant Materials (written in the style of AQA). I planned to make a
Greenpower kit car that can be supplied to schools that are wanting to compete in Greenpower
Races. The back wheels are inboard so the body can go around the wheels and not be interfered by
them. Nathaniel Olson GCSE Resistant Materials Final Idea Nathaniel Olson GCSE Resistant
Materials Complicated Version After making the basic version of my car, I need to make the proper
version of the car with individual pieces all mated together to make a functional car. Includes Wood,
Manufactured Boards, Metals, Plastics, Composite Materials, Ceramics, Smart Materials and
Material Finishes. Nathaniel Olson GCSE Resistant Materials Target Audience This would be aimed
at secondary schools that want to be involved in Greenpower, but lack the experience, knowledge
and the equipment to do so. It make the access to it easier because fast pit stops are necessary in
order to do well in the race. The electrics will be mounted near the motor to reduce the amount of
energy lost in transferring the power. Harness shoulder strap fixing points should be close to
shoulder height and neck width. Medium priced 32. 33. 34. Block, This requires less manufacturing
processes as it is purely a block of a specific size. This can cause trouble because the foam set off
quickly and becomes a really tough substance. By Nathaniel Olson. The Design Brief. Below is the
design brief. After that was completed, the 2 tubes that will clamp the 4 cross axles together needed
to be made. My original idea for the drive train was that to have the motor in front of the battery box
but due to limited space, I had to put the motor behind the battery box. Meet the deadline.
Suggested maximum five hours (three in class, 2 out of class). This contributes to the lightness of the
car which is about 25 kg without batteries and motor. After making the chassis, wood was required
to fill the gaps so the driver can sit in it. External bodywork either side of the driver’s body to a
minimum height of 250mm from the seat base, or elbow height if above this level, shall be of rigid
material such as aluminium, rigid plastics, carbon fibre, grp or other composites of at least 1.5mm
thickness. Plywood needs to be a minimum of 3mm thick.
I have made a couple of models to test certain things that was concerned about such as I need to test
the structural integrity of the chassis, so I made a card model to see how stiff it was. Papers
unfortunately didn’t fit without aid such as a folder or possibly something which allowed the paper
to stand on end. This would work the same way as the previous idea, but would have more space for
components. Deadlines for coursework and controlled using a range of materials and techniques This
course is suitable for GCSE Design and Technology: Resistant. Nathaniel Olson GCSE Resistant
Materials Evaluation 2 How does the product meet the specification. Slightly difficult to fit and
tends to become loose on its own. This allows space for the wheels to be there and able to move.
Without it, this resource is gcse for use only by you. The pupils that are interested in engineering and
racing need a kit-car that is competitive, because the current kit-car that is being supplied by
Greenpower is uncompetitive in most cases and extremely heavy. The only concern is that the way
that the glue works, it reacts with moisture and therefore it foams out of the joints. A 6mm diameter
hole should be drilled through any solid floors adjacent to the batteries to allow height measurement.
T4.2. The driver’s seat including any padding must be at or below 100mm from ground level. Aqa
resistant materials coursework deadline - HumanaGen. Aqa Resistant Materials Coursework Deadline
- snowboard com ua. See other similar resources ?3.50 (no rating) 0 reviews BUY NOW Save for
later Not quite what you were looking for. Because of time restrictions, it wasn’t possible to create
other add-ons such as the CD rack I planned earlier on. A 6mm hole should be drilled through the
base of the seat to allow height measurement. Collection of Data. Questionnaire. Survey.
Experimentation. GCSE Design and Technology: Resistant materials (4562) Controlled Assessment
Tasks and Guidance Introduction to your Resistant Materials Coursework. Firstly I began making
the cross axles parts which would hold the kingposts and the wheels. Data Handling GCSE
coursework. Hypothesis. Data Handling GCSE coursework. Hypothesis. Data Handling GCSE
coursework. Abbie Sidaway. What different techniques could I use on my product. Medium priced
32. 33. 34. Block, This requires less manufacturing processes as it is purely a block of a specific size.
Find deadlines for submitting controlled assessment or coursework to AQA. All of our Edexcel
GCSEs have a raw mark grade boundary A raw mark is the actual Design and Technology - Resistant
Materials Technology Unit grade. Contains opportunities for product analysis, materials and
processes, and some prompted design tasks Tes paid licence How can I reuse this. I used corner
blocks to improve the structural strength of the car. The battery box is one of the good features of
this car because, it’s built on a set of rail, so when the driver gets out, it can slide out. I could’ve done
some research on weight distribution and on how that affects the steering geometry and the feel of it
as I have absolutely no idea on how sensitive it will be. Deadlines for coursework and controlled
using a range of materials and techniques This course is suitable for GCSE Design and Technology:
Resistant. According to the testimonials of students, they feel resistant being overloaded with
college materials.
By Nathaniel Olson. The Design Brief. Below is the design brief. They would be attached to the
edge of the handlebar to the kingpost (rotatable mounts for the wheel). Gcse aqa resistant materials
coursework - Cambridge Science Park. Coursework, controlled assessment and non-exam assessment
(NEA. Between the two partitions, there would be pieces of wood spanning the gap and that would
be where the batteries and motor would go. As this is a computer model, I made lots of changes to
the design as I went along. Had to remove a bit of the colour background to save on printing ink
though and find a copy of publisher for it to to open. Coursework and controlled assessment
components assess candidates skills, you will be able to submit marks right up to the deadline; a
reduction in the. Reviews Select overall rating (no rating) Your rating is required to reflect your
happiness. Nathaniel Olson GCSE Resistant Materials Interview with Chris He talked about the
centre of gravity and the weight distribution and how that would improve the handling and the load
on each wheel. It make the access to it easier because fast pit stops are necessary in order to do well
in the race. GCSE Results Day: Grade Boundaries: 20th August 2015 - The? Find deadlines for
submitting controlled assessment or coursework to AQA. The advantage of this is that there is no
opening to get the batteries in and out and this gives it a aerodynamic advantage. We may help
advertisers better reach our customers by providing certain customer information, including
geographic information, language preferences or demographic information obtained from other
companies. Coursework, controlled assessment and non-exam assessment (NEA. The battery box is
one of the good features of this car because, it’s built on a set of rail, so when the driver gets out, it
can slide out. As it’s made out of wood, it can be cut up and modified easily. Write a review Update
existing review Submit review Cancel It's good to leave some feedback. This resource hasn't been
reviewed yet To ensure quality for our reviews, only customers who have purchased this resource can
review it Report this resource to let us know if it violates our terms and conditions. GCSE Resistant
Materials 2012 gadget tidy pdf 2012 low voltage light pdf 2012 mp3 dock pdf 2013 GCSE RM art
deco cabinet pdf 2013 GCSE RM jewlery. All of the metal parts will be standard carbon steel.
Knowledge, skills and understanding developed during GCSE Design and Technology: Resistant
Materials - Unit 2 (4560), for exams from June 2010. Stay up to date with all the latest news, events
and updates from AQA and the world of education Monitored Come check it out and start to
improve your grades 0 replies 2 Anyone started the coursework for new PE AQA A Level? Planning
your Work. Allow time to collect information. Medium priced 32. 33. 34. Block, This requires less
manufacturing processes as it is purely a block of a specific size. The motor will drive the first gear
on it and that will transfer to the second gear on the shaft. This can cause trouble because the foam
set off quickly and becomes a really tough substance. Includes Wood, Manufactured Boards, Metals,
Plastics, Composite Materials, Ceramics, Smart Materials and Material Finishes. Then we went back
to the car and talked about the gearing and what would be the best way of setting it up.