Writing a coursework, especially on a challenging topic like resistivity for A Level, can indeed be a

demanding and time-consuming task. It requires in-depth research, a comprehensive understanding

The resistivity A Level coursework, in particular, may involve complex theories, mathematical
calculations, and practical experiments. Students may find it challenging to balance theoretical
concepts with practical applications while meeting the academic standards set by their institutions.

Given the difficulty of the task, some students may consider seeking external help to ensure the
quality and accuracy of their coursework. One option is to explore professional writing services like
⇒ HelpWriting.net ⇔. These platforms can provide assistance in various aspects of coursework
writing, including research, data analysis, and content structuring.

However, it's crucial to approach such services with caution and ensure they maintain ethical
standards. Before seeking external help, students should make an effort to understand the
coursework topic thoroughly and attempt to complete the assignment independently. Seeking
assistance should be viewed as a supplementary measure to enhance understanding and improve the
final submission.

In conclusion, writing a resistivity A Level coursework can be challenging, and students may
consider external assistance from reputable platforms like ⇒ HelpWriting.net ⇔. However, it is
essential to prioritize independent learning and understanding of the coursework topic while using
external help as a supplementary resource.
Similarly, the shorter the wire, the smaller the resistance because there will be fewer atoms for the
electrons to bump into, thereby easing the flow of electricity. But opting out of some of these
cookies may have an effect on your browsing experience. Contains comprehension questions based
on the style of exam questions that can be expected for this required practical. These cookies do not
store any personal information. There are a few data points that are farther away from the line of
best fit than the others, but they are still consistent with the general trend. The free electrons keep
bumping into atoms. A wire's resistance depends on four main factors: Resistivity. It comes
COMPLETE WITH ANSWERS to all questions to encourage self assessment or simply to reduce
your marking burden. A typical set of results has been plotted in Figure 2. This resource hasn't been
reviewed yet To ensure quality for our reviews, only customers who have downloaded this resource
can review it Report this resource to let us know if it violates our terms and conditions. But more
importantly, the handout is a comprehensive summary of the chapter which the student can refer
back to when needed. Reviews Select overall rating (no rating) Your rating is required to reflect
your happiness. Variables There are different variables that can be changed in this experiment; these
are the independent variable. Angkit Jeyachandran on August 05, 2019: needs an evaluation plz
Nathan on April 09, 2019: This stuff has greatly helped me to finish my physics assignment. The
presentation comprise of teaser questions, worked examples, simulation, recommended experiment
and detailed explanations with flow of lesson in note section of presentation. The increase in
collisions would cause the resistance to rise. CAL on October 20, 2016: YOU SAVED MY LIFE
ANY FOR MY SECONDARY DATA CHEERS BIG TIME gracealbam on October 17, 2016: Omg
thanks so much Lono13 on October 12, 2016: Love this lono 2012, what a geeza XxX on September
06, 2016: we can be together forever doritoman on September 06, 2016: U R NOW EX doritoman
on September 06, 2016: I NO LUV U NO MO doritoman on September 06, 2016: This was really
helpful for my controlled assessment. Write a review Update existing review Submit review Cancel
It's good to leave some feedback. I will then turn the power pack on and record what voltmeter and
ammeter readings. This work booklet covers all aspects of the contents as outlined by AQA Physics
specification, section 3.5.1.3. This includes resistivity equation calculations, behaviour of ntc
thermistor and superconductivity. So, in theory, if the material has a large number of atoms, there
should be less resistance, because of the higher number of electrons.If the atoms in the wire are
closely packed, then this will cause an increase in resistance, due to frequent collisions. Our customer
service team will review your report and will be in touch. ?0.00 (no rating) 0 reviews Download Save
for later ?0.00 (no rating) 0 reviews Download Save for later Last updated 23 May 2022 Share this
Share through email Share through twitter Share through linkedin Share through facebook Share
through pinterest eyrejk's shop 4.25 78 reviews Not the right resource. Well done, Gold Star.:) angel
kyeremeh on May 08, 2017: this is so beautiful. I have taken three reading and have worked out the
average, shown in red. Write a review Update existing review Submit review Cancel It's good to
leave some feedback. Write a review Update existing review Submit review Cancel It's good to leave
some feedback. This resource hasn't been reviewed yet To ensure quality for our reviews, only
customers who have downloaded this resource can review it Report this resource to let us know if it
violates our terms and conditions. Again, I will record the voltmeter and ammeter readings and turn
off the power pack. Our customer service team will review your report and will be in touch. ?0.00
(no rating) 0 reviews Download Save for later ?0.00 (no rating) 0 reviews Download Save for later
Last updated 23 July 2019 Share this Share through email Share through twitter Share through
linkedin Share through facebook Share through pinterest Sophiedrew2000's Shop 4.50 2 reviews Not
the right resource. In theory, if the wire is doubled, then so will the resistance.
Jordan Fong on February 15, 2019: I like kids hehohehohehoeh on January 07, 2019: thanks a lot
really helped me bob on December 07, 2018: hi good stuff Flash on December 06, 2018: good one it
really helped me Lol on November 17, 2018: Rubbish stuff all incorrect Ur dad on November 15,
2018: I love ur willey middsi on October 27, 2018: needs conclusion but this is very well done.
Privacy Policy About Us Editorial Policy Terms of Use Privacy Settings CLOSE CLOSE CLOSE
CLOSE. See other similar resources ?3.00 (no rating) 0 reviews BUY NOW Save for later Not quite
what you were looking for. Lesson time can be spent checking and consolidating understanding. I
really appreciate the info you have logged into this. So, in theory, if the material has a large number
of atoms, there should be less resistance, because of the higher number of electrons.If the atoms in
the wire are closely packed, then this will cause an increase in resistance, due to frequent collisions.
This work booklet covers all aspects of the contents as outlined by AQA Physics specification,
section 3.5.1.3. This includes resistivity equation calculations, behaviour of ntc thermistor and
superconductivity. It comes COMPLETE WITH ANSWERS to all questions to encourage self
assessment or simply to reduce your marking burden. The collisions between the electrons and the
atoms cause the electrons to move slower, which in effect causes resistance. Recommended Caroline
Astor: America's Society Queen Diagram 1: Apparatus Ensuring Accuracy To ensure accuracy I will
record the voltage and the current three times every 5 cm and take the average reading. Write a
review Update existing review Submit review Cancel It's good to leave some feedback. Ben on
February 08, 2016: Thanks, I needed a secondary data source for my controlled assessment. See
other similar resources ?0.00 3.00 1 review Download Save for later Not quite what you were
looking for. In addition, I will make sure I turn the power pack off after each reading. The questions
are carefully selected to keep them relevant to the topic (Resistance and Resistivity and intersections
of previous topics) and avoid chapters that the students have not studied yet. See other similar
resources ?3.00 (no rating) 0 reviews BUY NOW Save for later Not quite what you were looking for.
Students can then attempt to answer the questions on the worksheet prior to a lesson. Out of these
cookies, the cookies that are categorized as necessary are stored on your browser as they are
essential for the working of basic functionalities of the website. This would cause more collisions
between the atoms and the electrons. Write a review Update existing review Submit review Cancel
It's good to leave some feedback. This resource hasn't been reviewed yet To ensure quality for our
reviews, only customers who have downloaded this resource can review it Report this resource to let
us know if it violates our terms and conditions. Graph Graphing these results shows a nearly straight
line, illustrating a strong positive correlation between length and resistance, which is consistent with
my prediction. Reviews Select overall rating (no rating) Your rating is required to reflect your
happiness. I have taken three reading and have worked out the average, shown in red. CAL on
October 20, 2016: YOU SAVED MY LIFE ANY FOR MY SECONDARY DATA CHEERS BIG
TIME gracealbam on October 17, 2016: Omg thanks so much Lono13 on October 12, 2016: Love
this lono 2012, what a geeza XxX on September 06, 2016: we can be together forever doritoman on
September 06, 2016: U R NOW EX doritoman on September 06, 2016: I NO LUV U NO MO
doritoman on September 06, 2016: This was really helpful for my controlled assessment. I will try to
make this investigation as accurate as possible. Elliott Hobnob on March 02, 2017: hi its elliot here
Callum Twizell on February 27, 2017: I have Ibra Messi and Saurez in my concept squad. I will also
ensure that there is a clear indication that the power is isolated by means of a switch and an L.E.D. I
will stand up during the investigation to ensure that I do not injure myself if something breaks.
Angkit Jeyachandran on August 05, 2019: needs an evaluation plz Nathan on April 09, 2019: This
stuff has greatly helped me to finish my physics assignment. See other similar resources ?0.00 (no
rating) 0 reviews Download Save for later Not quite what you were looking for.
The collisions between the electrons and the atoms cause the electrons to move slower, which in
effect causes resistance. Our customer service team will review your report and will be in touch.
?3.00 (no rating) 0 reviews BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY NOW Save
for later Last updated 27 June 2019 Share this Share through email Share through twitter Share
through linkedin Share through facebook Share through pinterest Science Geeks Shop 4.59 25
reviews Not the right resource. Conductors have resistance, but some are worse than others.
Furthermore, if you double the length of the wire, the resistance is roughly doubled. Because of the
length being proportional to the resistance, I could link the length of a wire with the resistance of the
wire, which would make my graph more interesting. Reviews Select overall rating (no rating) Your
rating is required to reflect your happiness. In addition, I will make sure I turn the power pack off
after each reading. I will try to make this investigation as accurate as possible. The increase in
collisions would cause the resistance to rise. In addition I finally conclude that the formula is genuine
and works. Once we derive the equation or formula of resistance, the definition, symbol, and formula
of resistivity will be prominent to us. We will also see how the formulas of resistance and resistivity
come up with the help of this simple experiment. In addition I finally conclude that the formula is
genuine and works. I will also ensure that the wire does not heat up too much by confirming that I do
not set the voltage too high on the power pack and by maintaining the same voltage for every
reading. Reviews Select overall rating (no rating) Your rating is required to reflect your happiness.
An R against L graph must look like this, (look below,) if resistance and length are directly
proportional to each other. This in effect would give much more accurate measurements. I have done
a preliminary experiment to help me decide the best way to do my investigation. I said that the
resistance will increase approximately proportionally to the length, and as you can see from the
graph, this was correct. This category only includes cookies that ensures basic functionalities and
security features of the website. Prediction I predict that the longer the wire, the larger the resistance.
This would have prevented the area of the wire from remaining constant and would have affected my
results. I found that the apparatus I used was suitable, but I think that I could possibly increase the
number of data points to generate more reliable results, perhaps by increasing the length of the wire
by 5 cm each time instead of by 10 cm. Join our team of reviewers and help other students learn. In
this article, I will investigate what affects the resistance of a wire. Contains comprehension questions
based on the style of exam questions that can be expected for this required practical. I know you
stated it was Nichrome, and 100 cm long, but the SWG is not stated - Am using your data as
secondary data and need to compare my investigation and yours. This is because if the length of the
wire is doubled, the electrons bump into twice as many atoms, so there will be twice as much
resistance. All materials are compatible with David Sang A-Level book. Overall, I think my method
was sufficient to obtain reliable results.