Compact Economical Cast Iron Pumps

Economical
The UT / UTZ Series is an economical version
of the Tsurumi U Series, semi-vortex submersible
pumps. It is designed for a wide range of applications.

Large Diameter Passage

The pump has a large passage that makes it
ideal for liquid containing various solids.

Available in Automatic Operation

Automatic version equipped with floats.

Applications
• Transferring wastewater between
storage tanks

• Draining sewage from factories, home

residences, hotels, restaurants, etc.

• Pumping water run-off containing solids.

Amenities from Technology

for People and the Earth
■ Features Cable
Molded
■ Major Standard Specifications
Anti-wicking Cable Entrance Cable
Discharge Size
Boot 2 inches (50mm)
Maximum protection against water incursion through
Sewage, Wastewater, and
the cable entry. Gland
Pumping Type of Fluid Liquid carrying Waste and
Fluid Solid Matters
Motor Protector Anti-Wicking
Fluid Temperature 32 to 104°F (0 to 40°C)
A built-in thermal motor protection device reacts to Block
Impeller Vortex
the heat caused by overcurrent or run-dry conditions by shutting down the motor Double Mechanical Seal
Structure Shaft Seal (with Oil Lifter)
circuit automatically. When the motor cools down to a safe operating temperature,
the motor restarts. Pump Bearing Double-shielded Ball Bearing
Impeller Glass-fiber Reinforced Resin
Dual Inside Mechanical Seal Materials Casing Gray Cast Iron
The dual inside mechanical seal (dual face mechanical seal located in an oil bath) Shaft Seal Silicon Carbide
is incorporated in all pumps. As both top and bottom sealing faces are lubricated Dry Type Submersible
by the oil, it ensures a longer life of the product and a stable sealing effect. Type, Pole
Induction Motor, 2-pole
Insulation Class E
Oil Lifter (Patented)
Tsurumi’s exclusive Oil Lifter encloses the mechanical seal and uses the Phase Single-phase
centrifugal force generated by the rotating shaft and seal to pump oil to the
Starting Method Capacitor Run
upper seal faces. Upper and lower seal faces are positively lubricated even
when extremely low oil levels exist, as experinced after long periods of extended Motor Circle Thermal Protector
Protection Device Miniature Thermal Protector
operation. Oil Lifter Mechanical (Built-in) (50UT2.4S only)
Seal
Lubricant Turbine Oil (ISO VG32)
Automatic Operation Shaft
oil Frame Gray Cast Iron
with Float Switch Materials Shaft 403 Stainless Steel
(50UTZ2.4S & 50UTZ2.75S) Shaft Cable PVC
The pump operates a float
Float Housing Polypropylene Resin
switch for automatic operation to Materials
Switch Cable Chloroprene Rubber
prevent dry running and lower
oil oil Discharge Connection Screwed Flange
power consumption. Guide Vane

■ Performance Curves ■ Dimensions

50 <50UT2.4S and 50UT2.75S> <50UTZ2.4S and 50UTZ2.75S>

45
60 Hz

D: Minimum Required Space

2 Pole
50 1/2 - 1hp
40 UT
(Z
35 )2.
75
S
D

30 50U
T(Z
)2.4
25
S L L

20

3 1/2"
Stop Range

15

H: Minimum Required Space

10
H

1 5/8"
Stop Range

0
0 10 20 30 40 50 60 70 80 90 100 110

■ Standard Specifications
Discharge Motor Solids Cable Pump
Voltages Impeller Dimensions (inch)
Model Size Output Phase Passage length Weight
(V) Material
(inch) (HP) L D H (inch) (ft) (lbs.)
50UT2.4S 2 1/2 115/220 1Ø PPO Resin 9 1/2 6 3/8 13 3/4 1.4 20 31
50UTZ2.4S 2 1/2 115/220 1Ø PPO Resin 9 1/2 11 5/8*1 15 3/4*1 1.4 20 31
50UT2.75S 2 1 115/220 1Ø PPO Resin 9 1/2 6 3/8 16 1.4 20*2 37
50UTZ2.75S 2 1 115/220 1Ø PPO Resin 9 1/2 11 5/8*1 18*1 1.4 20*2 37
*1 *2
Minimum Required Space 32ft is optional

We reserve the right to change the specifications and designs for improvement without prior notice.

TSURUMI (AMERICA), INC. • 1625 FULLERTON COURT, GLENDALE HEIGHTS, IL 60139 • TOLL-FREE 1-888-878-7864 • FAX 1-630-793-0146 • [email protected]
w w w. t s u r u m i p u m p . c o m TAI_UT_OCT2011_DC/NZ-D-G-N