Scribd
Upload
75 views4 pages

Digital Bandpass Modulation Techniques

The document discusses various digital modulation techniques. It begins by describing how a digital baseband message signal modulates an analog carrier signal in amplitude shift keying (ASK), frequency shift keying (FSK), and phase shift keying (PSK). It then summarizes types of digital modulation techniques including ASK, FSK, PSK, and their variants. The document focuses on describing ASK in more detail, explaining how binary data is represented by two amplitude levels of the carrier signal and how ASK works to modulate the amplitude of the carrier based on the digital baseband signal. It notes that ASK is susceptible to noise but is rarely used on its own.

Uploaded by

cipfpm.stda.sihd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views4 pages

Digital Bandpass Modulation Techniques

The document discusses various digital modulation techniques. It begins by describing how a digital baseband message signal modulates an analog carrier signal in amplitude shift keying (ASK), frequency shift keying (FSK), and phase shift keying (PSK). It then summarizes types of digital modulation techniques including ASK, FSK, PSK, and their variants. The document focuses on describing ASK in more detail, explaining how binary data is represented by two amplitude levels of the carrier signal and how ASK works to modulate the amplitude of the carrier based on the digital baseband signal. It notes that ASK is susceptible to noise but is rarely used on its own.

Uploaded by

cipfpm.stda.sihd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Digital Bandpass Modulation Techniques

In digital communications, the modulating baseband message signal: m(t) is a


binary or M-ary digital data stream. The carrier is usually a sinusoidal signal.
Voltage Tb

Digital
1. Baseband digital message signal: m(t) Signal 1 0 1 0
Time
2. Analog sinusoidal carrier signal: Carrier
A. Carrier signal: Ac cos( 2πfct + c ) Signal Time

3. ASK: Amplitude Shift Keying. ASK


A. Message signal changes the Signal Time
carrier’s amplitude : Ai(t).

4. FSK: Frequency Shift Keying. FSK


Signal
A. Message signal changes the Time
carrier’s frequency : fi (t) .

5. PSK: Phase Shift Keying. PSK


A. Message signal changes the Signal Time
carrier’s phase : i(t) .
Types of Digital Modulation Techniques

1. Amplitude Shift Keying: ASK


A. On-Off Keying: OOK.
B. Binary Amplitude Shift Keying: BASK.
2. Frequency Shift Keying: FSK
A. Binary Frequency Shift Keying: BFSK.
B. 4-level Frequency Shift Keying: 4-FSK.
3. Phase Shift Keying: PSK Digital signal with two signal levels
A. Binary Phase Shift Keying: BPSK.
B. Quadrature Phase Shift Keying: QPSK, DQPSK, OQPSK, π/4-QPSK.
C. 8-Level Phase Shift Keying: 8-PSK.
D. 16-Level Phase Shift Keying: 16-PSK.
4. Quadrature Amplitude Modulation: QAM
A. 16-QAM C. 128-QAM E. etc. . . .
B. 64-QAM D. 265-QAM
5. Continuous Phase Modulation: CPFSK
A. Minimum Shift Keying: MSK
B. Gaussian MSK: GMSK Digital signal with four signal levels
ASK: Amplitude Shift Keying
One dimensional linear modulation

1. Binary (2-level) ASK: BASK


Binary Data
(1-bit: 2 signal levels)

BASK
signal

2. 4-level ASK: 4-ASK


(2-bits: 4 signal levels) Binary Data

4-ASK
signal
ASK: Amplitude-Shift Keying
Basis of operation
1. When the baseband signal modulates the amplitude of the carrier signal, the process is
called “amplitude modulation”. For digital baseband signals, it is called “Amplitude Shift
Keying” : ASK . Also referred to as PAM: Pulse Amplitude Modulation.
2. Amplitude-Shift Keying (ASK) is a form of digital modulation that represents digital data
solely as variations in the amplitude of a carrier signal.
3. In ASK, the amplitude of the carrier signal is changed between two (or more) levels by the
digital information message signal: m(t) to represent a binary bit ‘0’ or a binary ‘1’ . The
carrier signal’s center frequency: fc and phase: c remain constant.
4. For binary ASK (BASK) , binary digit ‘1’ is represented by the presence of the carrier signal,
at constant amplitude, during a bit period: Tb , while binary bit ‘0’ is the absence of the carrier
during a bit period. If Tb indicates the time duration of one information bit, the two time-limited
modulated signals can be expressed as:
 2 Ei(t)
s( t )ASK  Ac m( t ) cos 2 fc t  c    Tb cos ( 2πf ct  φc) for a binary 1 ; m(t)  1
 0 for a binary 0 ; m(t)  0

5. Carrier frequency: fc = nc/Tb, Hertz, for some fixed integer: nc .
6. On-Off Keying (OOK) is also called Amplitude Shift Keying (ASK), which consists of keying
(i.e.: switching) a carrier sinusoid on and off with a uni-polar binary signal.
7. Since noise affects the amplitude of a signal, ASK is highly susceptible to noise interference,
fading, and electromagnetic induction. ASK is also most susceptible to the effects of non-
linear devices, which compress and distort the signal’s amplitude. It is rarely used on its own.

You might also like