Isogate WR Valves Spec Sheet 202009

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Isogate® WR Series

Knife Gate Valve


Technical Specifications Minerals


Isogate® WR series lightweight sturdy body is


designed to handle the most abrasive process
flow conditions, reducing total ownership cost.

Designed to reliably perform in a wide range Applications


• Hydrocyclone isolation and feed
of tough, abrasive and corrosive applications • Slurry transport
The Isogate® WR knife gate valve is designed to ensure longer wear life and increased • Floatation
reliability for multiple industries.
• Low pressure tailings
The improved gate guide will reduce gate deflection, stress on the downstream side of
the sleeve, and increase valve performance and life. The lightweight sturdy valve body is • Tailings distribution
designed to allow for the easy change-out of sleeves which are made from our
• Ash handling
Linard® HD60 premium rubber. The combination of the Linard® HD60 premium rubber
with a high-strength thin gate minimises discharge on cycling. • Mineral sands

Other features include chest and body flushing options, light weight construction, and Materials
full FEA analysis to ensure maximum safety and performance. • Body: Cast ductile iron as standard
• Gate: 304 stainless steel as standard,
316 stainless steel is also available
• Other materials such as 17-4PH
The resilient rubber for tough applications Hastelloy™ C-276, alloy 2205 are
Linard® HD60 rubber is a silica-reinforced natural rubber also available
product uniquely designed to provide high resilience • Sleeves: Linard® HD60 premium rubber
with good cut, tear and abrasion resistance.
• Yoke: Carbon steel
When developing our Linard® HD60 rubber we
specifically set out to produce a rubber that retains the Size Range
natural strength and nerve of latex, together with the
• 50mm (2”) through 600mm (24”)
toughness needed for handling coarse materials.
Flanges
• Ansi, AS, BS, DIN SABS
Isogate® WR knife gate valve is designed for safety, reliability
and cost efficiencies in slurry applications

Design features
• Robust construction ensures long service life

• Two-piece Linard® HD60 premium rubber sleeve


design with integral load distribution ring
reduces corrosion
Actuator*
• Field-replaceable thick Linard® HD60 premium
rubber sleeves are easily replaced without
disassembling the valve

• Bi-directional, full bore design reducing turbulence


Protective bellows and pressure drop
Heavy duty stainless
steel stem • Packingless design with grease labyrinth
that lubricates gate on cycling and requires
no adjustment

• Suitable for use in abrasive slurry services with


high percentage of solids

• Low discharge sleeve design minimises discharge


Stainless steel gate
on cycling (optional flush plate available)

• No seat cavities where solids can collect and


cause gate interference

• Yoke design allows fitting for all actuator types


without modifications
Packingless upper seal
• Body flushing ports offered as standard

• Proximity switch mounting holes provided as


Ductile iron body standard (no extra brackets required)

• Gate guides reduce gate movement and protect


sleeves from damage

Flexible two-piece
Linard® HD60
premium rubber
sleeves

Large open area


for discharge Optional flush plate

* Actuator options include: handwheel, bevel gear, pneumatic, hydraulic,


electric (pneumatic model shown).
Pneumatic Cylinder Valve Dimensions C
Size A B C D MASS
mm in mm in mm in mm in mm in kg lb
50 2 609 24 128 5.1 141 5.6 44 1.8 15 34
80 3 680 26.8 147 5.8 140 5.6 51 2 22 47
100 4 762 30 175 6.9 176 6.5 51 2 28 62
125 5 838 33 216 8.5 215 8.5 54 2.2 40 88 E
150 6 930 36.6 205 8.1 215 8.5 67 2.6 40 88 A

200 8 1205 47.4 270 10.6 215 8.5 75 3.0 55 121


250 10 1385 54.5 365 14.4 270 10.6 76 3.0 92 203
300 12 1600 63.0 440 17.3 375 14.8 82 3.2 161 355
350 14 1740 68.5 465 18.3 375 14.8 82 3.2 220 485
400 16 1940 76.4 502 19.8 375 14.8 89 3.5 264 582
450 18 2150 84.6 573 22.6 432 17.0 94 3.7 320 705 B D
500 20 2350 92.6 710 28.0 432 17.0 114 4.5 405 893
600 24 2755 108.5 760 30 535 21.1 114 4.5 632 1393

Manual Handwheel Valve Dimensions


Size A B C D MASS
mm in mm in mm in mm in mm in kg lb
50 2 537 21.2 128 5 200 7.9 44 1.8 11 25 E
80 3 646 25.5 147 5.8 270 10.7 51 6 15 33 A
100 4 502 19.8 175 6.9 270 10.7 51 2 19 43
125 5 845 33.3 216 8.5 290 11.4 54 2.2 38 84
150 6 890 35.0 205 8.1 290 11.4 67 2.6 25 55
200 8 1050 41.3 270 10.6 390 15.4 75 3.0 40 88
250 10 1305 51.4 365 14.4 470 18.5 76 3.0 58 128

B D

Hydraulic Cylinder Valve Dimensions C

Size A B C D MASS
mm in mm in mm in mm in mm in kg lb
50 2 609 24 128 5.1 145 5.6 44 1.8 23 51
80 3 680 26.8 147 5.8 138 5.6 51 2 26 57
100 4 762 30 175 6.9 176 6.5 51 2 32 71
125 5 838 33 216 8.5 205 8.5 54 2.2 39 86
E
150 6 930 36.6 205 8.1 205 8.1 67 2.6 43 95
A
200 8 1205 47.4 270 10.6 210 8.3 75 3.0 70 154
250 10 1385 54.5 365 14.4 220 8.7 76 3.0 90 198
300 12 1600 63.0 440 17.3 275 10.8 82 3.2 152 335
350 14 1740 68.5 465 18.3 290 11.4 82 3.2 177 390
400 16 1940 76.4 502 19.8 309 12.2 89 3.5 223 491
450 18 2150 84.6 573 22.6 310 12.2 94 3.7 - -
500 20 2350 92.6 710 28.0 330 13.0 114 4.5 - -
600 24 2755 108.5 760 30 330 13.0 114 4.5 - - B D
C E C E F G

F H
A A

B D B D

Gear Actuator Dimensions (top left)


Size A B C D E MASS
mm in mm in mm in mm in mm in mm in kg lb
300 12 1600 63.0 440 17.3 228 9.0 82 3.2 500 19.7 130 287
350 14 1680 66.1 465 18.3 228 9.0 82 3.2 500 19.7 145 320
400 16 1920 75.6 502 19.8 228 9.0 89 3.5 500 19.7 190 419
450 18 2160 85.0 573 22.6 228 9.0 94 3.7 500 19.7 216 476
500 20 2553 100.5 710.0 28.0 454.0 17.9 114.0 4.5 500 19.7 352.6 777
600 24 2922 115.1 760.0 30.0 477.0 18.8 114.0 4.5 700 27.6 508.5 1121

Electric Actuator Dimensions (top right)


Size A B C D E F G MASS
mm in mm in mm in mm in mm in mm in kg lb
50 2 537 21.2 128 5.1 223 8.8 44 1.8 499 19.6 125 4.9 340 13.4 59.5 131.1
80 3 646 25.5 147 5.8 223 8.8 51 2 499 19.6 125 4.9 340 13.4 62 136.6
100 4 502 19.8 175 6.9 223 8.8 51 2 499 19.6 125 4.9 340 13.4 66 145.5
125 5 845 33.3 216 8.5 223 8.8 54 2.2 499 19.6 125 4.9 340 13.4 70 154.3
150 6 890.0 35.0 205.0 8.1 223.0 8.8 67.0 2.6 360.0 14.2 125.0 4.9 340.0 13.4 76.0 167.5
200 8 1050.0 41.3 270.0 10.6 223.0 8.8 75.0 3.0 360.0 14.2 125.0 4.9 340.0 13.4 96.0 211.6
250 10 1305.0 51.4 365.0 14.4 223.0 8.8 76.0 3.0 360.0 14.2 125.0 4.9 340.0 13.4 111.0 244.6
300 12 1600.0 63.0 440.0 17.3 245.0 9.6 82.0 3.2 325.0 12.8 180.0 7.1 450.0 17.7 198.0 436.4
350 14 1680.0 66.1 465.0 18.3 245.0 9.6 82.0 3.2 325.0 12.8 180.0 7.1 450.0 17.7 213.0 469.5
400 16 1920.0 75.6 502.0 19.8 320.0 12.6 89.0 3.5 325.0 12.8 320.0 12.6 450.0 17.7 286.0 630.3
450 18 2160.0 85.0 573.0 22.6 320.0 12.6 94.0 3.7 325.0 12.8 320.0 12.6 450.0 17.7 316.0 696.5
500 20 2553.0 100.5 710.0 28.0 320.0 12.6 114.0 4.5 466.0 18.3 320.0 12.6 450.0 17.7 432.0 952.1
600 24 2922.0 115.1 760.0 30.0 400.0 15.7 114.0 4.5 496.0 19.5 400.0 15.7 515.0 20.3 578.0 1273.9

Weir Minerals
Copyright © 2020, Weir Minerals Australia Ltd. All rights reserved. The trademarks mentioned in this document are trademarks and/or
registered trademarks of the companies forming part of The Weir Group PLC. WMD1210/202010

isogate@mail.weir
www.global.weir

You might also like