Flo-Pac® + Pleated Depth

Filter Cartridges
Construction for organic solvent filtration

Parker Fulflo® Flo-Pac®+ pleated

cartridges are the filters of choice for
many industrial filtration requirements.
These cartridges are manufactured
with premium grade, phenolic
impregnated cellulosic filter media for
long service life, high flow rate and
low pressure drop. Unique epoxy
resin bonding of end caps, pleat side
seal and gaskets provides excellent
resistance to most organic solvents.
Flo-Pac+ pleated cartridges are
available in 0.5μm, 1μm, 5μm, 10μm,
20μm, 30μm, & 60μm pore sizes (95%
removal; ß = 20).

Contact Information Benefits

Parker Hannifin Corporation • Epoxy bonding of end caps, pleat • Recommended range is pH 4-10.
Industrial Process Filtration - N.A. side seal and gaskets provides (Please call for specific recommendation)
118 Washington Avenue resistance to most organic solvents • Spiral core withstands pressure surges
Mineral Wells, TX 76067 • Premium pleated cellulosic media to 100psid
allow high flow capacity at low • ISO 9001 registered company
phone +1 940 325 2575 pressure drop
• Available in a variety of sizes &
[email protected]
configurations to fit most industrial
Applications
www.parker.com/industrialprocess vessels • Aromatic Hydrocarbons (toluene,
• Impregnated phenolic resin xylene, benzene)
provides strength, integrity and • Ketones (acetone, isophorone,
high contaminant capacity methylethyl ketone)
• Suitable for operating temps. to • Ethers (THF, dioxane)
250°F (121°C) • Amines (DEA, TEA, DMEA)
• Perforated outer metal sleeve • Glycols (ethyl acetate, cellosolve
protects media against damage acetate)
• ETP (Electro-tin-plated) steel metal • Aliphatic Hydrocarbons (hexane,
components for aqueous and pentane, naphtha)
oil-based applications • Halogenated Hydrocarbons (methy-
• Gaskets provide positive seals and lene chloride, perchloroethylene)
are available in Viton,* cork and • Esters (EG, PEG, DEG)
standard Vellumoid
ENGINEERING YOUR SUCCESS.
Flo-Pac® + Filter Cartridges
SPECIFICATIONS Packaging Flow Rate and Pressure Drop Formulas
Materials of Construction 300 Series Flow Rate (gpm) = CleanΔP x Length Factor
Filter Media 310–24/carton (12 lb ≈ shipping wt) Viscosity x Flow Factor
Phenolic impregnated cellulose 320–12/carton (12 lb ≈ shipping wt) Clean ΔP = Flow Rate x Viscosity x Flow Factor
330–12/carton (18 lb ≈ shipping wt) Length Factor
Core - ETP steel
340–12/carton (24 lb ≈ shipping wt)
End Caps - ETP steel
600 Series
Sleeve - ETP steel 614–6/carton (20 lb ≈ shipping wt)
629–6/carton (40 lb ≈ shipping wt) FP+ Flow Factor
Adhesive - Epoxy (psid/gpm @ 1 cks) FP+ Length Factors
End Seals 700 Series
718–6/carton (20 lb ≈ shipping wt) Rating Flow Length
Vellumoid (standard), Viton®, cork Style
736–4/carton (26 lb ≈ shipping wt) (μm) Factor Factor
Maximum Recommended 0.5 0.0260 FP310 1.0
Operating Conditions Filtration Ratings
1 0.0170 FP320 2.0
Temperature: 250°F (121°C) 95% at 0.5μm, 1μm, 5μm,10μm, 20μm,
30μm, and 60μm pore sizes 5 0.0020 FP329 3.0
Change Out ΔP: 35psi (2.4bar) 10 0.0018 FP330 3.0
Flow Rate per Single Length Cartridge: 20 0.0010 FP340 4.0
300 Series 7gpm
30 0.0009
600 Series (3 ½ in ID) 50gpm FP614 3.6
600 Series (1 9⁄16 in ID) 35gpm 60 0.0005
FP629 7.2
700 Series 50gpm
Differential Pressure: 70psi (4.8bar) FP718 6.5
FP736 13.0
Dimensions
300 Series Liquid Particle Retention Ratings (μm)
2½ in OD x 1 in ID x 9 5⁄8 in, 19 ¾ in, @ Removal Efficiency of:
29 ¼ in, 29 5⁄8 in and 40 in long ß=5000 ß=1000 ß=100 ß=20
Notes:
Cartridge 1. Clean ΔP is psi differential at start.
Absolute 99.9% 99% 95% 2. Viscosity is centistokes. Use
600 Series Conversion Tables for other units.
FPE-0.5 12 10 3 0.5 3. Flow Factor is ΔP/GPM at 1cks for
6 ¼ in. OD x 3 ½ in. ID or 1 9⁄16 in. ID x 10 in. (or single).
14 3⁄8 in. long or 29 in. long FPE-1 15 12 6 1 4. Length Factors convert flow or ΔP
from 10 in. (single length) to
FPE-5 30 20 9 5 required cartridge length.
700 Series FPE-10 50 35 18 10
6 ¼ in OD x 2 5⁄8 in or 2 1⁄8 in ID
FPE-20 90 70 40 20
x 18 in or 36 in long
FPE-30 100 85 50 30
FPE-60 200 150 90 60

Ordering Information

FPE — —
Cartridge Code Outside Diameter Length Micron Rating (μm) Inside Diameter Seal Material Body

Flo-Pac + CODE INCHES SERIES CODE INCHES SERIES 0.5 CODE INCHES SERIES CODE DESCRIPTION CODE DESCRIPTION

3 2½ 300 10 9 5 ⁄8 300 1 None 1 300 Vellumoid Louvered Metal Body

A None
(300, 600, 700 Series) (300, 600, 700)
6 6¼ 600 14 14 3⁄8 600 5 None 3½ 600

7 6¼ 700 10 None 2 5⁄8 700 C Cork (700 Series Only) Expanded Metal
18 18 700 EX
(600, 700)
20 1 1 9⁄16 600 N Buna-N
20 19 ¾ 300
30 8 2 1⁄8 700 V Viton®
29 29 600
60
29 29 ¼ 300

30 29 5⁄8 300

36 36 700

40 40 300

44 43 ½ 600

54 54 700

Specifications are subject to change without notification. © 2017 Parker-Hannifin Corporation

For User Responsibility Statement, see www.parker.com/safety Industrial Process Filtration - North America
All Rights Reserved

Fulflo is a registered trademark of Parker-Hannifin Corporation

Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.

DS_IP_Flo-Pac Plus Rev. B