14W4 Ipc Motor Rev 3 15dic2001

Engine Illustrated Parts Catalog
Fourteenth Edition 1 September 1998 250–C30

Revision 3 15 December 2001 250–C30G
250–C30G/2
250–C30M
Publication ref. 14W4
250–C30P
250–C30S
Export controlled
This document may contain information whose
export is restricted by the Arms Export Control
Act (Title 22, U.S.C., Sec 2751, Et Seq.) or the
Export Administration Act of 1979, as amended,
(Title 50, U.S.C., App. 2401, Et Seq.). Violations
to these export laws are subject to severe criminal
penalties.
Liability disclaimer
This information is given in good faith, based on
the latest information available. No warranty or
other representation is given concerning such
information, which must not be taken as
establishing any contractual or other commitment
by the company or any of its subsidiaries or
associated companies
Proprietary rights legend

Rolls–Royce Corporation
This technical data and the information embodied
herein is the property of and proprietary to
Rolls–Royce Corporation, and shall not, without
prior written permission of Rolls–Royce
Corporation be disclosed in whole or in part to
third parties. This legend shall be included on
any reproduction of this data in whole or in part.
E2000 Rolls–Royce Corporation
Printed in USA
Rolls–Royce
250–C30 SERIES ILLUSTRATED PARTS CATALOG
NOTICE – These data are furnished with the understanding that they will be used for operational,
service, maintenance, and overhaul purposes only, and not to manufacture or procure the
manufacture of the part shown and/or described.
NOTICE – Rolls–Royce intends that the procedures and guidelines set forth in this publication be used
for the operation, maintenance, repair or overhaul of authorized Rolls–Royce parts.
Rolls–Royce has determined that these procedures and guidelines may not be acceptable
for use on parts manufactured by entities other than Rolls–Royce or Rolls–Royce approved
vendors and suppliers.
Revision Number Date

First Edition (Prototype Engine) 1 March 1976
Second Edition (Production Engine) 1 February 1978
First Revision 1 July 1978
Second Revision 1 January 1979
Third Revision 1 June 1979
Fourth Revision 1 December 1979
Fifth Revision 1 June 1980
Sixth Revision 1 December 1980
Seventh Revision 1 August 1981
Third Edition 1 December 1981
Fourth Edition 1 September 1982
First Revision 1 May 1983
Fifth Edition 1 January 1984
Sixth Edition 1 October 1985
Seventh Edition 1 December 1986
Eighth Edition 1 August 1989
Ninth Edition 1 May 1991
Tenth Edition 1 July 1992
First Revision 15 March 1993
Second Revision 15 March 1994
Eleventh Edition 1 May 1995
Twelfth Edition 1 December 1996
Thirteenth Edition 1 November 1997
Fourteenth Edition 1 September 1998
First Revision 15 November 1999
Second Revision 1 November 2000
Third Revision 15 December 2001
PAGE A
EXPORT CONTROLLED Rolls–Royce
LIST OF EFFECTIVE PAGES
CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE
LIST OF EFFECTIVE PAGES 1 DEC 15/01 20 DEC 15/01

2 DEC 15/01 21 DEC 15/01
3 DEC 15/01 22 DEC 15/01
4 DEC 15/01 23 DEC 15/01
5 DEC 15/01 24 DEC 15/01
6 DEC 15/01 25 DEC 15/01
MANUAL CONTENTS 1 NOV 1/00 26 DEC 15/01
2 SEP 1/98 27 DEC 15/01
BULLETIN LIST 1 DEC 15/01 28 DEC 15/01
2 DEC 15/01 29 DEC 15/01
3 DEC 15/01 30 DEC 15/01
4 DEC 15/01 31 DEC 15/01
5 DEC 15/01 32 DEC 15/01
6 DEC 15/01 33 DEC 15/01
7 DEC 15/01 34 DEC 15/01
8 DEC 15/01 35 DEC 15/01
LIST OF CHAPTERS 1 SEP 1/98 36 DEC 15/01
2 SEP 1/98 NUMERICAL INDEX – 1 DEC 15/01
INTRODUCTION 1 NOV 1/00 NUMERIC PART NUMBERS 2 DEC 15/01
2 NOV 1/00 3 DEC 15/01
3 DEC 15/01 4 DEC 15/01
4 NOV 1/00 5 DEC 15/01
5 NOV 1/00 6 DEC 15/01
6 NOV 1/00 7 DEC 15/01
7 NOV 1/00 8 DEC 15/01
8 NOV 1/00 9 DEC 15/01
ABBREVIATIONS 1 DEC 15/01 10 DEC 15/01
2 SEP 1/98 11 DEC 15/01
VENDOR CODES 1 NOV 15/99 12 DEC 15/01
2 NOV 15/99 13 DEC 15/01
VENDOR MANUALS 1 DEC 15/01 14 DEC 15/01
2 SEP 1/98 15 DEC 15/01
NUMERICAL INDEX – 1 DEC 15/01 16 DEC 15/01
ALPHA PART NUMBERS 2 DEC 15/01 17 DEC 15/01
3 DEC 15/01 18 DEC 15/01
4 DEC 15/01 19 DEC 15/01
5 DEC 15/01 20 DEC 15/01
7 DEC 15/01 21 DEC 15/01
8 DEC 15/01 22 DEC 15/01
9 DEC 15/01 23 DEC 15/01
10 DEC 15/01 24 DEC 15/01
11 DEC 15/01 25 DEC 15/01
12 DEC 15/01 26 DEC 15/01
13 DEC 15/01 27 DEC 15/01
14 DEC 15/01 28 DEC 15/01
15 DEC 15/01 29 DEC 15/01
16 DEC 15/01 30 DEC 15/01
17 DEC 15/01 31 DEC 15/01
18 DEC 15/01 32 DEC 15/01
19 DEC 15/01 33 DEC 15/01

PAGE 1
DEC 15/01
34 DEC 15/01 72–00–00, FIG. 2 0 NOV 15/99

35 DEC 15/01 1 SEP 1/98
36 DEC 15/01 2 NOV 1/00
37 DEC 15/01 3 DEC 15/01
38 DEC 15/01 4 NOV 1/00
39 DEC 15/01 5 NOV 1/00
40 DEC 15/01 72–00–00, FIG. 3 0 NOV 15/99
41 DEC 15/01 1 SEP 1/98
42 DEC 15/01 2 NOV 1/00
43 DEC 15/01 3 DEC 15/01
44 DEC 15/01 4 NOV 15/99
45 DEC 15/01 5 NOV 15/99
46 DEC 15/01 72–00–00, FIG. 4 0 NOV 1/00
47 DEC 15/01 1 SEP 1/98
48 DEC 15/01 2 SEP 1/98
49 DEC 15/01 3 DEC 15/01
50 DEC 15/01 72–00–00, FIG. 5 0 NOV 1/00
51 DEC 15/01 1 NOV 15/99
52 DEC 15/01 2 DEC 15/01
53 DEC 15/01 3 DEC 15/01
54 DEC 15/01 72–00–00, FIG. 6 0 NOV 1/00
55 DEC 15/01 1 SEP 1/98
56 DEC 15/01 2 DEC 15/01
57 DEC 15/01 3 SEP 1/98
58 DEC 15/01 72–05–00, FIG. 1 0 SEP 1/98
59 DEC 15/01 1 SEP 1/98
60 DEC 15/01 2 DEC 15/01
61 DEC 15/01 3 DEC 15/01
62 DEC 15/01 4 DEC 15/01
63 DEC 15/01 5 DEC 15/01
64 DEC 15/01 72–05–00, FIG. 2 0 SEP 1/98
65 DEC 15/01 1 SEP 1/98
66 DEC 15/01 2 DEC 15/01
67 DEC 15/01 3 SEP 1/98
68 DEC 15/01 4 NOV 15/99
HISTORICAL PARTS 1 SEP 1/98 5 SEP 1/98
2 NOV 1/00 72–05–00, FIG. 3 0 SEP 1/98
3 DEC 15/01 1 SEP 1/98
4 DEC 15/01 2 DEC 15/01
72–CONTENTS 1 SEP 1/98 3 DEC 15/01
2 SEP 1/98 4 DEC 15/01
72–CHAPTER TITLE 1 SEP 1/98 5 SEP 1/98
72–00–00, FIG. 1 0 NOV 15/99 72–05–00, FIG. 4 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
2 DEC 15/01 2 DEC 15/01
3 NOV 1/00 3 DEC 15/01
4 DEC 15/01 4 DEC 15/01
5 NOV 1/00 5 DEC 15/01
6 NOV 1/00 72–30–00, FIG. 1 0 DEC 15/01
7 NOV 1/00 1 NOV 1/00

PAGE 2
DEC 15/01
2 DEC 15/01 72–60–00, FIG. 2 0 SEP 1/98

3 NOV 1/00 1 SEP 1/98
4 NOV 1/00 2 NOV 1/00
5 NOV 1/00 3 NOV 15/99
6 NOV 1/00 4 NOV 15/99
7 NOV 1/00 5 NOV 15/99
72–30–00, FIG. 2 0 SEP 1/98 6 NOV 1/00
1 DEC 15/01 7 SEP 1/98
2 NOV 15/99 72–60–00, FIG. 3 0 NOV 15/99
3 NOV 1/00 1 SEP 1/98
4 NOV 1/00 2 NOV 1/00
5 SEP 1/98 3 NOV 1/00
72–40–00, FIG. 1 0 SEP 1/98 4 NOV 1/00
1 SEP 1/98 5 NOV 1/00
2 DEC 15/01 72–60–00, FIG. 4 0 NOV 15/99
3 SEP 1/98 1 NOV 15/99
72–50–00, FIG. 1 0 NOV 15/99 2 NOV 1/00
1 NOV 1/00 3 SEP 1/98
2 DEC 15/01 4 SEP 1/98
3 NOV 1/00 5 SEP 1/98
4 NOV 1/00 72–60–00, FIG. 5 0 NOV 15/99
5 SEP 1/98 1 SEP 1/98
72–50–00, FIG. 2 0 SEP 1/98 2 DEC 15/01
1 SEP 1/98 3 NOV 15/99
2 DEC 15/01 4 NOV 15/99
3 DEC 15/01 5 DEC 15/01
72–50–00, FIG. 3 0 SEP 1/98 6 DEC 15/01
1 DEC 15/01 7 SEP 1/98
2 DEC 15/01 72–60–00, FIG. 6 0 NOV 15/99
3 DEC 15/01 1 DEC 15/01
4 DEC 15/01 2 NOV 15/99
5 DEC 15/01 3 NOV 15/99
6 DEC 15/01 4 DEC 15/01
7 DEC 15/01 5 SEP 1/98
72–50–00, FIG. 4 0 SEP 1/98 72–60–00, FIG. 7 0 DEC 15/01
1 DEC 15/01 1 SEP 1/98
2 DEC 15/01 2 DEC 15/01
3 DEC 15/01 3 SEP 1/98
4 DEC 15/01 72–60–00, FIG. 8 0 SEP 1/98
5 SEP 1/98 1 DEC 15/01
6 NOV 15/99 2 SEP 1/98
7 NOV 1/00 3 NOV 1/00
72–60–00, FIG. 1 0 NOV 15/99 4 DEC 15/01
1 SEP 1/98 5 SEP 1/98
2 DEC 15/01 72–60–00, FIG. 9 0 NOV 15/99
3 NOV 15/99 1 SEP 1/98
4 NOV 15/99 2 NOV 15/99
5 NOV 15/99 3 DEC 15/01
6 NOV 15/99 4 NOV 15/99
7 NOV 15/99 5 SEP 1/98

PAGE 3
DEC 15/01
72–60–00, FIG. 10 0 NOV 15/99 73–10–00, FIG. 3 0 SEP 1/98

1 SEP 1/98 1 SEP 1/98
2 SEP 1/98 2 NOV 15/99
3 SEP 1/98 3 SEP 1/98
72–60–00, FIG. 11 0 SEP 1/98 73–10–00, FIG. 4 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
2 SEP 1/98 2 SEP 1/98
3 SEP 1/98 3 NOV 15/99
72–60–00, FIG. 12 0 NOV 15/99 4 SEP 1/98
1 SEP 1/98 5 SEP 1/98
2 SEP 1/98 73–10–00, FIG. 5 0 SEP 1/98
3 SEP 1/98 1 DEC 15/01
72–60–00, FIG. 13 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 NOV 15/99
2 DEC 15/01 4 NOV 15/99
3 SEP 1/98 5 SEP 1/98
4 SEP 1/98 73–10–00, FIG. 6 0 SEP 1/98
5 SEP 1/98 1 SEP 1/98
6 DEC 15/01 73–10–00, FIG. 7 0 SEP 1/98
7 SEP 1/98 1 SEP 1/98
72–60–00, FIG. 14 0 SEP 1/98 73–20–00, FIG. 1 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
2 SEP 1/98 2 SEP 1/98
3 SEP 1/98 3 SEP 1/98
4 NOV 15/99 4 NOV 15/99
5 SEP 1/98 5 NOV 15/99
72–60–00, FIG. 15 0 SEP 1/98 6 NOV 15/99
1 NOV 15/99 7 NOV 15/99
2 DEC 15/01 8 NOV 15/99
3 DEC 15/01 9 NOV 15/99
4 DEC 15/01 10 NOV 15/99
5 DEC 15/01 11 DEC 15/01
6 DEC 15/01 12 NOV 15/99
7 DEC 15/01 13 NOV 15/99
72–60–00, FIG. 16 0 SEP 1/98 14 NOV 15/99
1 SEP 1/98 15 NOV 15/99
2 SEP 1/98 73–20–00, FIG. 2 0 SEP 1/98
3 SEP 1/98 1 SEP 1/98
4 SEP 1/98 2 SEP 1/98
5 SEP 1/98 3 SEP 1/98
6 SEP 1/98 4 NOV 15/99
73–CONTENTS 1 SEP 1/98 5 NOV 15/99
2 SEP 1/98 6 NOV 15/99
73–CHAPTER TITLE 1 SEP 1/98 7 NOV 1/00
73–10–00, FIG. 1 0 SEP 1/98 8 DEC 15/01
1 SEP 1/98 9 NOV 15/99
2 NOV 15/99 10 NOV 15/99
3 DEC 15/01 11 NOV 15/99
73–10–00, FIG. 2 0 SEP 1/98 73–20–00, FIG. 3 0 SEP 1/98
1 NOV 15/99 1 SEP 1/98

PAGE 4
DEC 15/01
2 DEC 15/01 73–21–00, FIG. 6 0 SEP 1/98

3 SEP 1/98 1 SEP 1/98
73–20–00, FIG. 4 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 SEP 1/98
2 SEP 1/98 73–21–00, FIG. 7 0 SEP 1/98
3 SEP 1/98 1 SEP 1/98
4 SEP 1/98 73–21–00, FIG. 8 0 SEP 1/98
5 NOV 15/99 1 SEP 1/98
6 NOV 15/99 2 SEP 1/98
7 NOV 15/99 74–CONTENTS 1 SEP 1/98
8 NOV 15/99 2 SEP 1/98
9 NOV 1/00 74–CHAPTER TITLE 1 SEP 1/98
10 DEC 15/01 74–10–00, FIG. 1 0 SEP 1/98
11 NOV 15/99 1 NOV 15/99
12 NOV 15/99 74–10–00, FIG. 2 0 SEP 1/98
13 NOV 15/99 1 NOV 15/99
73–20–00, FIG. 5 0 SEP 1/98 74–10–00, FIG. 3 0 SEP 1/98
1 NOV 15/99 1 NOV 15/99
2 SEP 1/98 74–10–00, FIG. 4 0 SEP 1/98
3 NOV 15/99 1 NOV 15/99
4 SEP 1/98 74–20–00, FIG. 1 0 SEP 1/98
5 DEC 15/01 1 SEP 1/98
6 NOV 15/99 74–20–00, FIG. 2 0 SEP 1/98
7 NOV 15/99 1 SEP 1/98
73–20–00, FIG. 6 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 SEP 1/98
2 SEP 1/98 4 SEP 1/98
3 SEP 1/98 5 SEP 1/98
73–20–00, FIG. 7 0 SEP 1/98 74–20–00, FIG. 3 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
73–21–00, FIG. 1 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 SEP 1/98
2 DEC 15/01 74–20–00, FIG. 4 0 SEP 1/98
3 DEC 15/01 1 SEP 1/98
4 DEC 15/01 2 SEP 1/98
5 SEP 1/98 3 SEP 1/98
73–21–00, FIG. 2 0 SEP 1/98 74–20–00, FIG. 5 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
2 SEP 1/98 2 SEP 1/98
3 SEP 1/98 75–CONTENTS 1 SEP 1/98
73–21–00, FIG. 3 0 SEP 1/98 2 SEP 1/98
1 NOV 1/00 75–CHAPTER TITLE 1 SEP 1/98
2 SEP 1/98 75–10–00, FIG. 1 0 SEP 1/98
3 SEP 1/98 1 SEP 1/98
73–21–00, FIG. 4 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 DEC 15/01
2 NOV 1/00 4 SEP 1/98
3 NOV 1/00 5 SEP 1/98
73–21–00, FIG. 5 0 SEP 1/98 75–10–00, FIG. 2 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98

PAGE 5
DEC 15/01
2 SEP 1/98 SPARE PARTS– 1 SEP 1/98

3 SEP 1/98 CONTENTS 2 SEP 1/98
75–10–00, FIG. 3 0 SEP 1/98 SPARE PARTS–
1 SEP 1/98 CHAPTER TITLE 1 SEP 1/98
2 SEP 1/98 2 SEP 1/98
3 SEP 1/98 SPARE PARTS 1 SEP 1/98
75–10–00, FIG. 4 0 SEP 1/98 2 SEP 1/98
1 SEP 1/98 3 SEP 1/98
2 SEP 1/98 4 SEP 1/98
3 SEP 1/98 5 NOV 1/00
75–10–00, FIG. 5 0 SEP 1/98 6 SEP 1/98
1 SEP 1/98 7 SEP 1/98
2 SEP 1/98 8 SEP 1/98
3 SEP 1/98 9 SEP 1/98
4 SEP 1/98 10 SEP 1/98
5 SEP 1/98 KITS–CONTENTS 1 SEP 1/98
6 DEC 15/01 2 SEP 1/98
7 SEP 1/98 KITS–CHAPTER TITLE 1 SEP 1/98
75–10–00, FIG. 6 0 SEP 1/98 KITS, FIG. 1 0 SEP 1/98
1 SEP 1/98 1 SEP 1/98
2 SEP 1/98 2 SEP 1/98
77–CONTENTS 1 SEP 1/98 3 NOV 15/99
2 SEP 1/98 4 DEC 15/01
77–CHAPTER TITLE 1 SEP 1/98 5 DEC 15/01
77–20–00, FIG. 1 0 NOV 15/99 6 DEC 15/01
1 NOV 15/99 7 DEC 15/01
2 SEP 1/98 8 DEC 15/01

PAGE 6
DEC 15/01
MANUAL CONTENTS/ARRANGEMENT
USER COMMENT
RECORD OF REVISIONS
TITLE PAGE
MANUAL CONTENTS/ARRANGEMENT
LIST OF COMMERCIAL ENGINE BULLETINS (CEB’S)
LIST OF CHAPTERS
INTRODUCTION (EXPLANATION OF HOW TO USE THE CATALOG)
LIST OF ABBREVIATIONS
LIST OF VENDOR CODES, NAMES, AND ADDRESSES
LIST OF VENDOR COMPONENT MANUALS
NUMERICAL INDEX
ALPHA PART NUMBERS
NUMERIC PART NUMBERS
HISTORICAL PART NUMBERS
DETAILED PARTS LISTS
SPARE PARTS
KITS
MANUAL CONTENTS
PAGE 1
NOV 1/00
THIS PAGE INTENTIONALLY LEFT BLANK
MANUAL CONTENTS
PAGE 2
SEP 1/98
SERVICE BULLETIN LIST
250 SUBJECT Incorporated
CEB in Manual
72–3001 Engine, Compressor No. 1 Bearing Support Indexing – Add DEC 1/79
72–3002 Gearbox, Oil Check Valve – Replace DEC 1/79
A–72–3003 Engine, Power & Accessory Gearbox Generator & 77 Tooth Spur Idler Gearshafts – MAY 1/95
Replace, Rev. No. 2
72–3004 Engine, Compressor No. 1 Bearing Oil Pressure Reducer – Replace, Rev. No. 1 JUN 1/79
72–3005 Engine, Compressor Mount Assy – Replace Rev. No. 3 DEC 1/80
72–3006 Engine, Power & Accessory Gearbox Cover Assy Fuel Pump Drive Seal Bore Chamfer DEC 1/79
– Add
72–3007 Engine, Anti–Icing Solenoid Valve – Reposition JUN 1/79
72–3010 Engine, Outer Combustion Case – Rework, Rev. No. 4 JUN 1/79
72–3012 Engine, Power & Accessory Gearbox Pinion Bearing Oil Nozzle – Rework, Rev. No. 1 JUN 1/80
72–3013 Gearbox, Power, Accessory Oil Delivery Tube – Replace, Rev. No. 4 DEC 1/79
72–3014 Engine, No. 1 Bearing Oil Pressure Supply Tube Clamp – Add JUN 1/79
72–3016 Engine, Gearbox Housing & Cover Assy Oil Pressure Ports Helical Coil Inserts – Add, JUN 1/80
Rev. No. 1
72–3017 Engine, Power & Accessory Gearbox Cover Assy Turbine Support Studs – Replace, MAR 15/94
Rev. No. 3
72–3018 Engine, Compressor Discharge Air Tube Flange Doubler Plates – Add SEP 1/98
72–3019 Cancelled (See 72–3031) SEP 1/98
72–3020 Engine, Power & Accessory Gearbox Spur Adapter Gearshaft No. 2–1/2 Bearing DEC 1/80
Journal – Rework, Rev. No. 1
72–3022 Engine, Power & Accessory Gearbox Oil Delivery Tube – Replace, Rev. No. 2 AUG 1/89
72–3023 Engine, Turbine Assy Exhaust Collector Retaining Rings – Add, Rev. No. 2 JUN 1/80
72–3024 Engine, Turbine Assy Horizontal Fireshield – Modify AUG 1/89
72–3025 Engine, Power Turbine Outer Coupling Nut – Rework, Rev. No. 3 OCT 1/85
72–3026 Engine, Start Counter Mounting Bracket Edge Radius – Modify DEC 1/80
72–3027 Engine, Fireshield Insulation Blanket – Rework JUN 1/80
72–3028 Cancelled (See 72–3060) SEP 1/98
72–3029 Cancelled (See 72–3226) NOV 15/99
72–3030 Engine, Compressor Scroll Bleed Passage – Plug JUN 1/80
72–3031 Engine, Turbine 1st Stage Nozzle Assy – Modify, Rev. No. 4 SEP 1/82
72–3032 Turbine Assy No. 6 & 7 Bearing Pressure Oil Nozzle Assy – Replace, Rev. No. 2 AUG 1/89
72–3033 Engine, Gearbox Housing & Cover Assy Scavenge Oil Ports Helical Coil Inserts – Add DEC 1/80
72–3034 Engine, Power & Accessory Gearbox No. 2–1/2 Bearing Cage Scallops – Add, DEC 1/80
Rev. No. 2
A–72–3036 Engine, Turbine 2nd–Stage Nozzle – Modify, Rev. No. 4 AUG 1/89
72–3038 Engine, Turbine 2nd Stage Wheel – Modify, Rev. No. 1 DEC 1/80
72–3039 Engine, Power & Accessory Gearbox Pinion Gear Bearing – Replace, Rev. No. 1 DEC 1/80
72–3040 Turbine, Exhaust Collector Flowsplitter – Modify, Rev. No. 3 OCT 1/85
BULLETIN LIST
PAGE 1
DEC 15/01
CEB in Manual
72–3042 Engine, Compressor Impeller Rear Stub Shaft – Repair by Modification, Rev. No. 3 OCT 1/85
72–3043 Engine, Power & Accessory Gearbox, Cover Assy & Stepped Bearing Cage – Enlarge AUG 1/81
Gear Access Aperture – Modify, Rev. No. 2
72–3044 Engine, Turbine, Exhaust Collector Inner Cone – Modify JAN 1/84
72–3046 Engine, Compressor No. 1 Bearing & Retaining Nut – Replace, Rev. No. 2 OCT 1/85
A–72–3049 Engine, Turbine Inner & Outer PT Shafts, Replacement DEC 1/81
72–3050 Engine, Gearbox, Spur Adapter Gearshaft Forward Split Seal Piston Ring – SEP 1/82
Replace By Seal of Improved Material
72–3052 Engine, Compressor Front Bearing Housing – Change MAY 1/83
72–3053 Cancelled (See 72–3119) OCT 1/85
72–3054 Engine, Gearbox Scavenge Oil Transfer Tube, Replace by Tube (PICCOLO) For Burrs DEC 1/81
Once Only, Rev. No. 1
A–72–3056 Engine, Turbine, 4th–Stage Nozzle – Inspect, Rev. No. 5 MAY 1/95
72–3057 Cancelled (See 72–3093) OCT 1/85
72–3058 Engine, Turbine, P.T. Inner Shaft – Repl By Shaft with Increased Pilot Dia OD, DEC 1/86
Rev. No. 2
72–3059 Engine, Compressor & Gearbox Assys – Modify To Roller No. 2–1/2 Bearing MAY 1/95
Configuration, Rev. No. 7
72–3060 Engine, Magnetic Plugs – Replace SEP 1/82
72–3065 Engine, Turbine Assy, PT. Oil Sump Cover – Modify, Rev. No. 3 JAN 1/84
72–3066 Engine, Flight Approved Covers, Rev. No. 2 JAN 1/84
72–3067 Engine, Conversion 250–C30 to 250–C30S, Rev. No. 2 OCT 1/85
72–3068 Engine, Turbine & Exhaust Collector Support Assy – Add Gearbox Breather Port Vent MAY 1/83
& Compr Bleed Valve Vent, Rev. No. 2
72–3069 Engine, Power & Accessory Gearbox Cover Assy Pinion Boss Gear Access Aperture – MAY 15/92
Round Edges
72–3070 Engine, Compr Assy, Rear Labyrinth Seal – Replace Suspect Seal at Next Overhaul MAY 1/83
72–3072 Engine, Turbine, Retaining Ring Nos. 6 & 7 Bearings – Replace, Rev. No. 1 JAN 1/84
72–3073 Engine, Gearbox Assy, No. 2–1/2 Cage Studs – Replace, Rev. No. 2 AUG 1/89
72–3074 Engine, Gearbox Lubrication System – Change Oil Pump Attachment Bolts, Rev. No. 1 MAY 1/83
72–3075 Engine, Gearbox Oil Filter Differential Pressure Indicator – Change, Rev. No. 1 MAY 1/83
72–3077 Engine, Gearbox, Cover Assy Scavenge & Pressure Oil Transfer Tube Ports Lead–In MAY 1/83
Chamfer – Modify
72–3078 Engine, Compressor Rear Support & Diffuser Assys, Indexing Pin – Replace OCT 1/85
72–3079 Engine, Turbine Assy, Access Holes to Horizontal Firewall Shield Assy. – Add, AUG 1/89
Rev. No. 1
A–72–3081 Engine, Compressor Mount Assy – Inspect for Cracks MAY 1/83
72–3083 Engine “Quick Disconnect” Magnetic Drain Plugs – Install, Rev. No. 8 NOV 15/99
72–3085 Engine, Compressor – New Compressor Mount Assy – Replace, Rev. No. 2 OCT 1/85
72–3086 Engine, Gearbox Assy, Oil Pressure Jet – Add a 2nd Jet Hole OCT 1/85
72–3089 Engine, Gearbox, New Bushing for Oil Check Valve, Rev. No. 2 MAR 15/94
BULLETIN LIST
PAGE 2
DEC 15/01
CEB in Manual
72–3091 Engine, Scroll To Air Tube Flange Adapter Assy – Replace, Rev. No. 1 AUG 1/89
72–3093 Engine, Compressor Shroud Housing – Modify, Rev. No. 4 AUG 1/89
72–3094 Engine, Turbine, No. 8 Bearing – Replace, Rev. No. 1 OCT 1/85
72–3095 Engine, Gearbox, 26 Tooth Idler Gearshaft Bearing – Replace, Rev. No. 7 DEC 1/86
72–3096 Engine, Turbine – Exhaust Collector Modifications, Rev. No. 4 MAR 15/94
A–72–3098 Engine, Power & Accessory Gearbox Cover & Housing Assy, Magnetic Plug, NOV 1/97
Rev. No. 6
72–3099 Engine, Turbine Assy, 4th Stage Nozzle – Reidentify, Rev. No. 2 MAR 15/94
A–72–3100 Engine, Compressor Assy Spur, Adapter Gearshaft – Modify by Adding Three Slots in MAY 1/95
Bore & Plugging Oil Feed Hole, Rev. No. 2
72–3101 Engine, Turbine Assy, 1st & 2nd Stage Nozzle Assys – Add Outer Band Ring & Rope JUL 1/92
Packing, Rev. No. 6
72–3102 Cancelled OCT 1/85
72–3103 Cancelled OCT 1/85
72–3104 Engine, Gearbox, Bearings, Manufactured by Marlin–Rockwell Corp.– Inspect OCT 1/85
Separator, Rev. No. 1
72–3107 Engine, Turbine, 1st Stage Turbine Wheels With Small Trailing Edge Fillet Radius – JAN 1/84
Replace
A–72–3108 Engine, Turbine, Turbine Shafting – Inspect, Rev. No. 3 JAN 1/84
72–3109 Engine, Turbine Assy, Gas Producer Rotor Assy – Replace Tie Bolt by Tie Bolt of MAY 1/91
Improved Strength, Rev. No. 3
72–3110 Engine, Vertical Firewall Assy – Modify MAR 15/93
72–3111 Engine, Turbine Assy, Exhaust Collector Vent Tube Doublers, Rev. No. 2 JUL 1/92
72–3114 Turbine Assy, Turbine Nozzle Shield Positioning Plug – Modify, Rev. No. 1 OCT 1/85
A–72–3115 Engine, Outer Combustion Case Assy, Add Reinforcement Wire Patch – Modify, MAY 1/95
Rev. No. 4
A–72–3119 Engine, Turbine Assy, Inner & Outer P.T. Thicker Electroless Nickel Plate, Rev. No. 2 JUL 1/92
72–3121 Engine, Accessory Gearbox Assy, Improved through Bolt Attachment Arrangement for NOV 1/97
the Idler Gear, Rev. No. 2
72–3122 Engine, Turbine Assy, New 4th Stage Nozzle, Rev. No. 1 OCT 1/85
72–3123 Engine, Gearbox Oil Transfer Tubes Replace & Flanged Bushings Installed, Rev. No. 2 AUG 1/89
A–72–3124 Engine, Turbine Assy, External Energy Absorbing Ring – Installation, Rev. No. 2 MAY 1/95
A–72–3125 Engine, Turbine Assy, Horizontal Firewall Shield Assy; Modification for Installation of MAY 1/95
the External Energy Absorbing Ring, Rev. No. 3
72–3126 Engine, Accessory Gearbox Assy, Flanged Studs for Compressor Mounting Boss MAR 15/94
Repair, Rev. No. 2
A–72–3127 Engine, Gas Producer Turbine Assy, Additional Assy & Inspection Procedures OCT 1/85
A–72–3128 Engine, Turbine Assy, Modification of Gas Producer Support & Incorporation of the MAY 1/95
Internal Energy Absorbing Ring, Rev. No. 2
A–72–3131 Engine, Turbine Assy, 2nd Stage Nozzle – Increased Clearance in the Labyrinth Seal, MAY 1/95
Rev. No. 2
A–72–3132 Engine, Turbine Assy, New 2nd Stage Turbine Wheel OCT 1/85
BULLETIN LIST
PAGE 3
DEC 15/01
CEB in Manual
A–72–3134 Engine, Turbine Assy, Turbine to Compressor Coupling Shaft – Replace, Rev. No. 2 OCT 1/85
A–72–3135 Engine, Turbine Assy, Turbine to Compressor Coupling Shaft – Replace, Rev. No. 3 MAY 1/95
A–72–3136 Engine, Turbine Assy, External Energy Absorbing Ring – Removal, Rev. No. 1 MAY 1/95
A–72–3137 Engine, Turbine Assy, New 2nd Stage Turbine Wheel, Rev. No. 2 AUG1/89
72–3138 Engine – No. 6, 7 & 8 Bearing Lube Oil Supply Line–Check Valve Addition DEC 1/86
72–3142 Engine, Turbine Assy, 3rd Stage Nozzle Assy, Modify NOV 1/97
A–72–3143 Engine, Turbine Assy – Inspect Turbine Shafting & Replace Spur Adapter Gearshaft MAY 1/95
O–ring, Rev. No. 1
72–3145 Engine, Accessory Gearbox Assy, Gearbox Cover Rework for New Fuel Control Oil NOV 15/99
Pump Gearshaft, Rev. No. 1
A–72–3146 Engine, Turbine Assy – Inspection of Splined Adapter Locknut Torque, Rev. No. 1 MAR 15/93
72–3147 Engine, Compressor Shroud Housing – Epoxy Paint Coating Over Al–Polyester Lining, AUG 1/89
Rev. No. 1
72–3148 Cancelled (See 72–3173 & 72–3174) JUL 1/92
72–3150 Engine, Turbine Assy, 2nd–Stage Nozzle Inner Ring – Replace, Rev. No. 1 AUG 1/89
72–3151 Engine, Power Turbine Support Assy & Sump Cover Assy – Rework, Rev. No. 1 AUG 1/89
72–3152 Engine, Power & Accessory Gearbox, Installation of Increased Capacity Oil Pump, MAY 1/95
Rev. No. 5
72–3153 Engine, Turbine Assy, Gas Producer Support – Modification for Internal Energy NOV 1/97
Absorbing Ring Support Pads, Rev. No. 5
72–3154 Engine Accessory Gearbox Oil Filter Housing – Add Bronze Bushings to “Oil In”, NOV 15/99
“Oil Out” & Bypass Parts, Rev. No. 4
72–3157 Cancelled (See 72–3193) MAY 1/95
72–3158 Engine, Turbine Assy, Installation of the No. 5 Bearing Labyrinth Seal, Rev. No. 4 NOV 1/00
72–3160 Engine, Turbine, Pressure Oil Check Valve Clamping Spacer – Replace SEP 1/98
72–3161 Engine, Turbine, Gas Producer Support, Modify Pilot Fit, Rev. No. 2 MAR 15/93
72–3164 Cancelled JUL 1/92
A–72–3165 Engine, Turbine Assy, Gas Producer Pressure Oil Tube Replacement, Rev. No. 1 MAY 1/95
72–3166 Gearbox Assy, Deletion of 15 H.P. Spare Acc Drive Section – Optional, Rev. No. 3 MAY 1/91
72–3168 Engine Assy, 1st Stage Nozzle Diaphragm Locating Keywelds – Modify, Rev. No. 2 MAR 15/94
72–3170 Cancelled (See 72–3242) NOV 15/99
72–3171 Engine, Compressor Assy, Alternate Compressor, Shroud Housing Coating, Rev. No. 3 NOV 1/97
72–3172 Cancelled MAY 1/91
72–3176 Engine, Compressor Assy, Diffuser Replacement for Hot Day Performance NOV 15/99
Enhancement, Rev. No. 7
72–3177 Engine, Gearbox Assy, Oil Pump Body Assy Inspection & Rework, Rev. No. 2 MAY 1/95
A–72–3180 Engine, Turbine Assy, Alseal Coating of P.T. Inner & Outer Shafts, Rev. No. 7 DEC 1/96
BULLETIN LIST
PAGE 4
DEC 15/01
CEB in Manual
72–3181 Engine Gearbox, Rework of Electrical Harness Connector Bracket JUL 1/92
72–3182 Engine, Accessory Gearbox, Rework to add new Scavenge Oil Pickup Tube Rev. No. 1 MAY 1/95
72–3183 Engine, Turbine Assy, 3rd Stage Nozzle Assy, Modify MAY 1/91
72–3184 Engine, Compressor Assy, Compressor Scroll, Reinforcing Wire Screen, Add MAY 1/91
72–3185 Engine, Compressor Assy, Addition of Puller Grooves for Removal of No. 2 Bearing, MAY 1/95
Rev. No. 2
72–3188 Engine, Turbine Assy, 2nd Stage Turbine Nozzle Radial Clearance – Modify, Rev. No. 2 MAY 1/95
72–3189 Engine, Turbine Assy, Gas Producer No. 8 Bearing Thrust Plate – Replace, Rev. No. 1 MAY 1/95
72–3190 Cancelled (See 72–3199) MAY 1/95
72–3191 Engine, Compressor Assy, Shroud Rework & Reidentification for use on 250–C30G/2 MAY 1/95
Engines, Rev. No. 1
72–3193 Engine, Gearbox Assy, Installation of New No. 3 & No. 4 Roller Bearing with Tabbed NOV 1/97
Outer Ring & Cage, Rev. No. 3
72–3194 Engine, Gearbox Assy, Replacement of Front Bearing Support – Rework DEC 1/96
A–72–3195 Engine, Turbine Assy, Inspection & Rework of No. 5 Bearing Snap Ring Groove in MAR 15/93
Exhaust Collector – Rework, Rev. No. 1
72–3196 Engine, Turbine Assy, Authorization to Reidentify Semi–Finished 2nd Stage Nozzles, DEC 15/01
Rev. No. 3
72–3199 Engine, Turbine Assy, Release of New No. 8 Dampened Bearing with increased MAY 1/95
Dampening Capacity, Rev. No. 1
72–3200 Engine Compressor Assy, Rework of Compressor Front Shroud Housing – Increased NOV 15/99
Inducer Bleed Slot & New Contour, Rev. No. 4
72–3201 Engine, Gearbox Assy, Rework of 250–C30G/2 Front PTO Output Flanges to DEC 1/96
Incorporate Anchor Nuts
72–3202 Engine, Inspection for Proper Clamping DEC 1/96
72–3203 Engine, Turbine Assy, Release of New Turbine Assy for 250–C30G/2 Engine DEC 1/96
72–3205 Engine, Quick Disconnect Magnetic Plugs – Inspect Locking Pins & Insert Slots for DEC 1/96
Wear, Rev. No. 3
72–3206 Engine, Accessory Gearbox, Rework Gearbox Cover for Installation of No. 3 & No.4 MAY 1/95
tabbed Outer Race Bearings
72–3207 Engine, Turbine Assy, Replacement of 3rd Stage Nozzle for Improved Performance, NOV 1/97
Rev. No. 2
72–3209 Engine, Turbine Assy, Rework of Horizontal Fireshield, P/N 23057784, Rev. No. 2 NOV 1/97
72–3210 Engine, Turbine, Rel of NO. 5 Labyrinth Seal Air Tube Slip Joint – Replacement NOV 1/97
72–3212 Engine, Gearbox Assy, Oil Delivery Tube, Improved Targeting, Rev. No. 1 NOV 1/97
72–3213 Engine, Compressor, Release of Improved Surge Margin Hardware for 250–C30(HU) NOV 1/97
Engines Installed in Boeing Aircraft Only, Rev. No. 1
A–72–3217 Engine, Accessory Gearbox Assy, Improved No. 3 & 4 Bearings – Install, Rev. No. 3 DEC 15/01
72–3218 Engine, Compressor Assy, Release of New No. 1 Bearing Assy to Reduce One Hertz NOV 15/99
Whine
72–3219 Engine, Turbine Assy, Horizontal Fireshield – Replace, Rev. No. 2 NOV 15/99
72–3221 Engine, Turbine Assy, Gas Producer Turbine Support – Replace NOV 15/99
BULLETIN LIST
PAGE 5
DEC 15/01
CEB in Manual
72–3224 Engine, Compressor Assy – New Shroud Housing, Rev. No. 1 SEP 1/98
72–3226 Engine, Power & Accessory Gearbox – PTO Gearshaft Grooves – Add, Rev. No. 1 NOV 15/99
72–3227 Engine, Combustion Section, Release of New Reduced Smoke Combustion Liner – NOV 15/99
Replace, Rev. No. 2
72–3232 Cancelled NOV 1/00
72–3234 Engine, Compressor Assy – Release of New No. 1 Bearing Scavenge Tube NOV 15/99
72–3235 Engine, Gearbox Assy – Release of New Spare Pad Cover to Prevent Oil Leakage NOV 15/99
72–3238 Engine, Turbine Assy – Recoating of Inner Power Turbine Shaft, Rev. No. 1 NOV 1/00
72–3239 Engine, Compressor – Scroll Assy, Replacement, Rev. No. 2 NOV 1/00
72–3240 Engine, Compressor – Compr Rear Support – New Stationary Seal Coating, Rev. No. 2 NOV 15/99
72–3242 Engine, Compressor Assy, Release of New No. 1 Bearing Assy to Reduce One Hertz NOV 15/99
Whine, Rev. No. 1
72–3244 Engine, Gearbox Assy – Release of New Helical Torquemeter Gearshaft Assys & NOV 1/00
Internal Retaining Rings, Rev. No. 1
72–3245 Engine, Turbine Assy – Release of New Engine Rear Mount Assy, Rev. No. 1 DEC 15/01
A–72–3247 Engine, Compressor Assy – New Compressor Scroll, Rev. No. 2 NOV 1/00
72–3250 Engine, Compressor Assy – Release of New Increased Thickness Compressor Scroll NOV 1/00
A–72–3252 Engine, Turbine Assy – Inspection & Replacement of 1st Stage Nozzle Shield DEC 15/01
72–3256 Engine Assy – One–Time Inspection of –C30 Engine Identification Plates DEC 15/01
73–3001 Engine Fuel & Control, Fuel Control & Governor Assy Screened Orifice – Replace, NOV 15/99
Rev. No. 2
73–3002 Engine, Fuel & Control Start, Acceleration Flow Schedule Adjuster – Add, Rev. No. 1 DEC 1/80
73–3003 Fuel System, Gas Producer Fuel Control – Modify, Rev. No. 1 DEC 1/79
73–3004 Engine, Fuel & Control, Pc Air Filter – Add, Rev. No. 5 DEC 1/80
73–3005 Engine, Fuel & Control, N2 Overspeed & Compressor Bleed Control Solenoids Plunger DEC 1/79
Spring – Replace
73–3006 Engine, Fuel & Control, N2 Overspeed Control – Replace, Rev. No. 2 MAY 1/95
73–3007 Engine, Fuel & Control, LP. Fuel Filter – Rework, Rev. No. 1 JUN 1/79
73–3008 Engine, Fuel & Control, N2 Overspeed Control – Replace, Rev. No. 2 DEC 1/80
73–3009 Engine, Fuel & Control, Fuel Control Improved Lever & Bellows Assys – Replace, AUG 1/89
Rev. No. 2
73–3010 Engine, Fuel & Control, Fuel Control Assy Governor Bellows Damper Rings – Add AUG 1/81
73–3011 Engine Fuel & Control, LP. Fuel Filter Assy, BOWL Retaining Bolt, Add Retaining Ring SEP 1/82
Keeper, Rev. No. 1
73–3012 Bendix P.T. Governor – Inspect Drive Shaft & Add Epoxy Bonding to Torsional Spring OCT 1/85
Drive Assy, Rev. No. 4
73–3013 Engine Fuel & Control, LP. Fuel Filter Assy – Inspect Filter Element Sealing Rings, AUG 1/81
Rev. No. 1
A–73–3014 Engine Fuel & Control, Fuel Pump to LP. Filter Tubing Alignment, Tube Assy 6899191 SEP 1/82
& 6895832, One–time Inspection
A–73–3015 Engine Fuel & Control, N2 Overspeed Control Assy, Add Lockwashers to Ground SEP 1/82
Jumper Wire & Relocate, Rev. No. 2
BULLETIN LIST
PAGE 6
DEC 15/01
CEB in Manual
73–3017 Engine, Fuel & Control, Bendix Power Turbine Governor, Incorporation of Governor AUG 1/89
Body Access Window
A–73–3018 Engine Fuel & Control, Disarm N2 (Electronic) Overspeed Control System – OCT 1/85
250–C30M & –C30P Single Engine Applications ONLY, Rev. No. 2
73–3019 Cancelled AUG 1/89
73–3022 Engine Fuel & Control, Bendix Fuel Control & PT. Governor Assys, Filter Fittings – Add, AUG 1/89
Rev. No. 2
73–3024 Engine Fuel & Control, Fuel Control & Governor Assys – Modify, Rev. No. 2 AUG 1/89
73–3027 Engine Fuel & Control, Fuel Control Assy – Relocate Px Orifice, Rev. No. 1 OCT 1/85
73–3028 Engine, Fuel & Control, Bendix Fuel Control Assy – Secondary Px Enrichment – AUG 1/89
Modify, Rev. No. 1
73–3029 Engine, Fuel & Control, Bendix Fuel Control Unit Acceleration Governor Bellows JUL 1/92
Scrubber – Add, Rev. No. 1
73–3030 Engine, Fuel & Control, Allied/Bendix Fuel Control, Model DP–VI, Increase in AUG 1/89
Intermediate Max Flow Stop Settings
73–3034 Engine, Fuel & Control, Improved Engine N2 Overspeed Control Assy – Installation, JUL 1/92
Rev. No. 2
73–3039 Engine, Fuel & Control, Allied/Bendix Fuel Control, Model DP–VI, Increase Low AUG 1/89
Maximum Fuel Flow Setting
73–3042 Engine, Fuel & Control, Inspection of Certain Bendix Fuel Control Bellows Assys, MAY 1/95
Rev. No. 2
73–3046 Engine, Fuel & Control, Bendix Power Turbine Governor, Conversion to High Speed JUL 1/92
Governor for Model C30G Installations
73–3047 Engine, Fuel & Control, Deletion of N2 Electronic Overspeed System from Single DEC 1/96
Engine Applications. Rev. No. 3
73–3052 Engine, Fuel & Control, Rework of N2 Overspeed Control, Rev. No. 1 MAR 15/93
73–3057 Engine, Fuel & Control, C30G PT Overspeed Governor, Addition of Counterweighted MAR 15/93
PTG Governor Lever Arm – Modify, Rev. No. 1
A–73–3058 Engine, Fuel & Control, Disarm N2 (Electronic) Overspeed Control System – MAR 15/94
Multi–Engine Aircraft, Rev. No. 2
73–3059 Cancelled MAR 15/94
73–3060 Engine, Fuel & Control – Installation of New Throttle Positioning Spring – Replace MAR 15/93
73–3061 Engine, Fuel & Control, Release of New Fuel Control With Stronger Bypass Valve SEP 1/98
Cover Retaining Screws – Modify Rev. No. 1
73–3062 Engine, Electrical System Assy – Release of New Fuel Control with Stronger Bypass SEP 1/98
Valve Cover Retaining Screws – Modify
73–3063 Engine, Fuel & Control, Release on New Fuel Control Which Produces Four Fuel DEC 1/96
Settings – Modify, Rev. No. 1
73–3064 Engine, Fuel & Control, Removal of 3 Cubic In. Accumulator – Remove MAR 15/94
A–73–3068 Engine, Fuel & Control, Replacement of Fuel Control Bellows – Replace, Rev. No. 3 NOV 1/00
73–3069 Engine, Fuel & Control, Replacement of Fuel Control Heater Manifold, Rev. No. 1 MAR 15/94
73–3070 Engine, Fuel & Control, Release of New Investment Casting Cover Assy, Rev. No. 2 SEP 1/98
73–3071 Engine, Fuel & Control, Removal of Magnetic N2 Speed Pickup, Rev. No. 2 MAY 1/95
73–3073 Engine, Fuel & Control, Conversion of C30 PT Governor for Use on C30G/2 Engines MAY 1/95
BULLETIN LIST
PAGE 7
DEC 15/01
CEB in Manual
73–3074 Engine, Fuel & Control, Additional Clamping Required Due to Release of New CECO SEP 1/98
Fuel Pump
73–3076 Engine, Electrical System, Install New Clamping, Rev. No. 2 NOV 1/97
73–3077 Engine, Fuel & Control, Release of New Design Shaftseal for CECO Model 263 & MFP DEC 1/96
Fuel Pump
73–3080 Engine, Fuel & Control, Tube Assemblies – Replace NOV 1/97
73–3082 Engine, Fuel & Control, Fuel Control Heater – Washer Substitution to Improve Stud NOV 1/97
Protrusion
73–3083 Engine, Fuel & Control, Fuel Control Po Prime Dampening Orifice Removal, Rev. No. 2 NOV 15/99
73–3084 Engine,Fuel & Control, Power Turbine Governor Drive Bearings – Replace, Rev. No. 1 NOV 15/99
73–3085 Engine, Fuel & Control, Fuel Control Drive Bearings – Replace NOV 1/97
73–3106 Engine, Fuel & Control – Release of New Bypass Retention Plate DEC 15/01
74–3001 Engine, Electrical – Start Counter Assy – Removal/Installation NOV 15/99
75–3002 Air, Compressor Bleed Control System – Add JUN 1/79
75–3003 Air System, Compressor Bleed Valve Gasket – Add, Rev. No. 1 DEC 1/79
75–3004 Air System, Compressor Bleed Valve Screen – Add, Rev. No. 1 DEC 1/79
75–3005 Air System, Compressor Bleed Valve Orifices & Cover Plugs – Replace, Rev. No. 2 JUN 1/79
75–3006 Air System, Compressor Bleed Valve Installation – Modify, Rev. No. 5 MAY 1/83
75–3007 Air System, Compressor Bleed Valve Replumbed Configuration – Modify, Rev. No. 1 DEC 1/80
75–3008 Air System, Air Valve Assy – Reduce Diameter of Piston AUG 1/81
75–3009 Air System, Compressor Bleed Valve – Add Vented Plug, Rev. No. 1 AUG 1/81
75–3010 Air System, Bleed Valve Assy, Recalibrate, Rev. No. 1 DEC 1/81
75–3011 Air System, Compressor Bleed Valve Bellows – Replace, Rev. No. 1 SEP 1/82
75–3012 Air System, Bleed Valve Assy Mounting Gasket, Replace by Stainless Steel Gasket, DEC 1/81
Rev. No. 1
75–3013 Fuel, Lube & Air System, Solenoid Valve Assy – Replace Rivets, Rev. No. 1 OCT 1/85
75–3014 Air System, Compressor Bleed Valve Assy Bellows Dampener – Scrap Blue Colored MAY 1/83
Dampener
75–3015 Air System, Compressor Bleed Valve Gasket – Replace with Larger Hole Gasket MAY 1/83
75–3016 Anti–ice Air Tube – Replace OCT 1/85
A–75–3017 Engine, Fuel, Lube & Air System, Improved Strength Pc Filter Housing, Rev. No. 2 MAR 15/93
75–3020 Engine, Air System, Venting of Bleed Valve Discharge Air JUL 1/92
A–75–3021 Engine, Fuel, Lube & Air System, Relocated Pc Filter JUL 1/92
75–3022 Engine, Air System, Venting of Bleed Valve Discharge Air MAY 1/91
BULLETIN LIST
PAGE 8
DEC 15/01
EXPORT CONTROLLED
Rolls–Royce
LIST OF CHAPTERS/SECTIONS
CHAPTER/
SECTION TITLE
72 ENGINE
72–00–00 Engine Assembly

72–05–00 Shipping Parts
72–30–00 Compressor Unit
72–40–00 Combustion Section
72–50–00 Turbine Unit
72–60–00 Gearbox
73 ENGINE FUEL SYSTEM
73–10–00 Engine Fuel System

73–20–00 Engine Fuel System (Controls)
73–21–00 Engine Electrical Harness Assembly
74 ENGINE IGNITION SYSTEM
74–10–00 Exciter
74–20–00 Spark Igniter Lead & Igniter
75 ENGINE AIR SYSTEM
75–10–00 Anti–Icing & Bleed Air
77 ENGINE INDICATING SYSTEM
77–20–00 Temperature Measurement System
SPARE PARTS SPARE PARTS
SPARE PARTS Recommended Spare Parts
KITS KIT SECTION
KITS Kits
LIST OF CHAPTERS
PAGE 1
SEP 1/98
LIST OF CHAPTERS
PAGE 2
SEP 1/98
INTRODUCTION
1. GENERAL
This Illustrated Parts Catalog illustrates, lists, and provides information and instructions for ordering and
using parts required for support of Model 250–C30, 250–C30P, 250–C30M, 250–C30S, 250–C30G and
250–C30G/2 Turboshaft Aircraft Engines, designed, developed and manufactured by Rolls–Royce,
Indianapolis, Indiana 46206–0420. The engine is designed for horizontal installation.
CAUTION: THIS HANDBOOK IS NOT THE AUTHORITY FOR ASSEMBLY OR DISASSEMBLY
PROCEDURES. OVERHAUL OR REPAIR SHOULD BE PERFORMED BY
AUTHORIZED PERSONNEL USING APPLICABLE MANUALS.
2. INTRODUCTION
This section contains directions for use of the manual including definitions of codes, symbols, and
abbreviations, and a list of Contractor–Furnished Equipment/Contractor–Furnished Aeronautical
Equipment (CFE/CFAE) components with separate manual coverage.
3. NUMERICAL INDEX
The Numerical Index is divided into an alpha list (part numbers beginning with an alphabetic character) and
a numeric list (part numbers beginning with a numeric character).
A. PART NUMBER COLUMN
This column lists in numerical order all part numbers which appear in the “Part Number” column. Part
number arrangement begins on the extreme left–hand position and continues from left to right, one
position at a time, until all parts are arranged in sequence. The order of precedence for each position
of the part number is:
Dash (–)
Letters A through Z
Numerals 0 through 9
Alphabetic O’s are considered as numerical zeros.
B. CHAPTER–SECTION–UNIT–FIGURE–ITEM COLUMN
This column lists the Chapter–Section–Unit and Figure–Item number for each part for cross– reference
to the Detailed Parts List.
(1) When the words “HISTORICAL PARTS” appears, refer to the HISTORICAL PARTS list following
the NUMERICAL INDEX to determine the disposition of the part.
NOTE: The HISTORICAL PARTS list is a group of part numbers superseded, discontinued and
removed from the Detailed Parts List. Reference to the Commercial Engine Bulletin
(CEB) incorporating the necessary detailed instructions is also listed when applicable.
C. TOTAL REQUIRED COLUMN
This column lists the total units per entry.
4. DETAILED PARTS LIST
This section is an illustrated breakdown of the engine parts listed in disassembly sequence. Right and left
hand sides are defined as viewed from the rear (exhaust) end of the engine, looking forward.
A. ILLUSTRATIONS
Each major assembly or component is separately illustrated. Each part or assembly portrayed on the
illustration is assigned an Item number for cross reference to the parts list bearing the same
Chapter–Section–Unit and Figure number as the illustration.
INTRODUCTION
PAGE 1
NOV 1/00
B. FIG–ITEM COLUMN
This column shows the Figure number and Item numbers corresponding to the detail parts of the
associated illustration.
(1) A dash (–) printed immediately preceding the Item number indicates the part is not illustrated.
(2) Figure and Item number alpha variants may be used to signify modifications or configuration
differences. Alpha variants are assigned consecutively, A thru Z, except I and O.
C. PART NUMBER COLUMN
Part numbers in this column are used exclusively to identify parts. The term “FIG. REF” in this column
denotes that the part number is called out elsewhere in the manual, the location being specified in the
nomenclature column. The words “NO NUMBER ” are inserted in this column if no part number has
been assigned.
D. NOMENCLATURE COLUMN
This column lists nomenclature and description of parts, the stock disposition of superseded parts,
reference to next higher assemblies, and reference to other locations for breakdown of separately
illustrated assemblies or components. Vendor manufacturers are identified by the use of the letter “V”
and the five digit Federal Supply Code for manufacturers in parenthesis following the nomenclature.
(1) INDENTATION SYSTEM
The nomenclature of major assemblies and/or components begins in column one (as shown by
the number 1 in the string 1234567 in the Nomenclature column heading), followed by their detail
parts listing indented to show their relationship to the assembly. All parts beginning in column two
(preceded in the nomenclature column by a single period or dot) are detail parts of the first
preceding assembly listed in column one. All parts beginning in column three (two dots) are detail
parts of the first preceding assembly in column two (one dot), and so on.
(2) ATTACHING PARTS
Attaching parts are listed immediately beneath and have the same indentation level as the parts
grouping or assembly which they attach. In the case of assemblies, they precede any detail parts
of the assembly. They are captioned “– ATTACHING PARTS” –and “– – – * – – –” signifies end
of attaching parts.
(3) UNITS OF MEASURE
Numerical units of measurement in this manual are given in terms standard to the United States
System of Weights and Measures (English System). The metric equivalent is shown in
parenthesis following the English System measurement. All lengths and diameters are listed in
inches, and bolt threads are listed in threads per inch (i.e., 0.250–28 X 0.750 = 0.250 inch diameter,
28 threads per inch, 0.750 inch long). SI metric units (International System of Units) are listed
where the component is originally produced to those units of measurement
(i.e., bearings 30 X 55 X 13 MM).
E. EFFECT CODE COLUMN
The alpha code appearing in this column identifies those parts used only with certain engines. When
no code appears, the part is usable on all engines unless otherwise specified in the description column.
Codes are as follows:
A = 250–C30 B = 250–C30P C = 250–C30M
D = 250–C30S E = 250–C30G F = 250–C30G/2
F. UNITS PER ASSY COLUMN

This column lists the total number of units required at that location. Abbreviations that may also be
found in this column include REF (reference), ALT (alternate for part immediately preceding), AR (use
as required), and NP (not procurable, see (NHA) next higher assembly).
INTRODUCTION
PAGE 2
NOV 1/00
G. REVISION SYMBOLS
Changes to illustration and text material from the previous edition/revision of the catalog are indicated
by a letter “R” or a revision bar to the left of each affected line.
5. ORDERING PARTS
Provide information for material ordered as follows:
A. ILLUSTRATED PARTS CATALOG number with figure and index number of each part needed.
B. Quantity desired.
C. Part Number.
D. Complete nomenclature.
E. Complete unit and model identification (from option plate).
F. TYPE rather than WRITE the required information.
G. Furnish complete shipping instructions. This is important in case the order is not to be handled in the
normal manner. Indicate whether shipment should be made via parcel post, express, freight, air
express, air freight, etc.
H. To place an order, contact Aviall, Inc. via:
E–Mail: [email protected]
Fax: USA 1–800–329–2842

International 1–972–406–2315
Phone: USA 1–800–284–2551

International 1–972–586–1985
INTRODUCTION
PAGE 3
DEC 15/01
6. HOW TO USE THE ILLUSTRATED PARTS CATALOG (SEE FIGURE 1)
A. To locate a part number and its location in the engine when only the part name and/or appearance is
known:
(1) From the List of Chapters, select the appropriate Chapter; then turn to the Chapter Table of
Contents page, and further determine from the Figure titles the illustration where the part might
logically appear.
(2) Turn to the Chapter–Section–Unit and Figure number determined in step (1), and locate the part
and its Item number on the illustration.
(3) Find the corresponding Item number on the Detailed Parts List page to determine the part number
and complete nomenclature.
B. To locate a part name and its location in the engine when only the part number is known:
(1) Locate the part number in the Numerical Index. Note the Chapter–Section–Unit, Figure, and Item
number reference.
(2) Turn to the same Chapter–Section–Unit and Figure number determined in step (1), and locate the
proper Item number from the Detailed Parts List, then verify the part number. Note the descriptive
nomenclature.
(3) Refer to the illustration. Here a likeness of the part will be found by referring to the same Item
number as given in the Detailed Parts List.
INTRODUCTION
PAGE 4
NOV 1/00
HOW TO USE THE ILLUSTRATED PARTS CATALOG

FIGURE 1
INTRODUCTION
PAGE 5
NOV 1/00
ORIENTATION VIEW OF ENGINE

FIGURE 2
INTRODUCTION
PAGE 6
NOV 1/00

FIGURE 3
INTRODUCTION
PAGE 7
NOV 1/00

FIGURE 4
INTRODUCTION
PAGE 8
NOV 1/00
ABBREVIATIONS
ALT ALTERNATE NO. NUMBER

APPL APPLICATION NP NON–PROCURABLE (SEE NHA)
APPROX APPROXIMATELY OD OUTSIDE DIAMETER
AR AS REQUIRED OS OVERSIZE
ASSY ASSEMBLY POSN POSITION (S)
CCW COUNTERCLOCKWISE PROC PROCUREMENT
CEB COMMERCIAL ENGINE BULLETIN PT PART
CM CENTIMETER PTO POWER TAKEOFF
COMPR COMPRESSOR PUB. PUBLICATION
CONN CONNECTOR QTY QUANTITY
CRES CORROSION–RESISTANT STEEL R&R REWORK & REIDENTIFY
CU CUBIC REF REFERENCE
CW CLOCKWISE REIDENT REIDENTIFICATION
DIA DIAMETER REL RELEASED
DISC. DISCONTINUED REPL REPLACEMENT
F FAHRENHEIT REQD REQUIRED
FSCM FEDERAL STOCK CLASS MANAGER REV. REVISION
FIG. FIGURE RFSE REQUEST FOR SERV EVALUATION
FRO FUTURE REPLACEMENT ORDER RH RIGHT HAND
FT FEET RPM REVOLUTIONS PER MINUTE
GP GAS PRODUCER S SUPERSEDES
GOV GOVERNOR SB SUPERSEDED BY
HD HEAD SERV SERVICE
HMI HEAVY MAINTENANCE INSPECTION S/L SPLITLINE
ID INSIDE DIAMETER SLFLKG SELF–LOCKING
IDENT IDENTIFICATION SOL SOLENOID
IN. INCH (ES) TEMP TEMPERATURE
INT INTERNAL THD THREAD
LG LONG THK THICK
LH LEFT HAND UIA USE IN ASSEMBLY
LP LOW PRESSURE US. UNDERSIZE
MM MILLIMETER UW USE WITH
NATO NORTH ATLANTIC TREATY V VENDOR (PRECEDES VENDOR
ORGANIZATION CODE)
N/C NORMALLY CLOSED ° DEGREE
NHA NEXT HIGHER ASSEMBLY & AND
ABBREVIATIONS
PAGE 1
DEC 15/01
ABBREVIATIONS
ABBREVIATIONS
PAGE 2
SEP 1/98
FSCM/CAGE/NATO VENDOR CODES, NAMES & ADDRESSES
CODE VENDOR NAME & ADDRESS
V05160 MICHIGAN DYNAMICS INC.

32400 Ford Road
Garden City, MI 48135–1512
V09456 QUALITY CONTROL CORPORATION, QUALISEAL DIV.

7301 W. Wilson Avenue
Chicago, IL 60656–4601
V11599 COLTEC INDUSTRIES, CHANDLER EVANS CONTROL SYSTEMS DIVISION

P.O. 330651
West Hartford, CT 06133–0651
V14818 PUROFLOW CORPORATION

16559 Santicoy Street
Van Nuys, CA 91406
V26044 NEW HAVEN MFG CORP., GAR–KENYON CONTROLS DIV.

446 Blake Street
New Haven, CT 06515–1238
V05228 PTI TECHNOLOGIES, INC.

950 Rancho Canejo Blvd
Newbury Park, CA 91320–1796
V59501 UNISON INDUSTRIES

7575 Baymeadows Way
Jacksonville, FL 32256
V59875 ARGO–TECH CORP., AIRCRAFT ACCESSORIES DIVISION

2355 Euclid Avenue
Cleveland, OH 44117–1703
V68037 ARGO–TECH CORP., NAVY POWER DIV.

23555 Euclid Ave.
Cleveland, OH 44117–1703
V71895 DELAVAN, INC.

811 Fourth Street
West Des Moines, IA 50265–0100
V71934 GENERAL MOTORS CORP., ROCHESTER PRODUCTS DIV.

2100 Burlingame Avenue
Grand Rapids, MI 49501
V81482 SIMMONDS PRECISION PRODUCTS INC., CO–OPERATIVE INDUSTRIES DIV.

100 Oakdale Road
Chester, NJ 07930–9428
V82829 ALLEN AIRCRAFT PRODUCTS, INC.

6168 Woodbine Avenue
Ravenna, OH 44266–9665
VENDOR CODES
PAGE 1
NOV 15/99
FSCM/CAGE/NATO VENDOR CODES, NAMES & ADDRESSES
CODE VENDOR NAME AND ADDRESS
V83311 SIMMONDS PRECISION, ENGINE SYSTEMS DIVISION

P. O. Box 310
Norwich, NY 13815
V9X173 ALLIED SIGNAL, INC., AEROSPACE EQUIPMENT SYSTEMS

3475 Wesleyan Blvd, N.
Rocky Mount, NC 27804
V90005 FACET ENTERPRISES INC., FILTER PRODUCTS DIVISION

8439 Triad Drive
Greensboro, NC 27409–9621
V91587 REXNORD INC. SEAL DIVISION

634 Glenn Avenue
Wheeling, IL 60090–6018
V94231 THE CHAMPION COMPANY, SPECIAL PRODUCTS DIVISION

400 Harrison Street
Springfield, OH 45501
V96487 VALCOR ENGINEERING CORP.

2 Lawrence Road
Springfield, NJ 07081–3121
V99167 SUNDSTRAND AVIATION OPERATIONS, UNIT OF SUNSTRAND CORP.

4747 Harrison Avenue
Rockford, IL 61125
VENDOR CODES
PAGE 2
NOV 15/99
VENDOR COMPONENTS WITH SEPARATE COMPONENT MAINTENANCE MANUALS

(CMM’S) THAT APPEAR IN THE 250–C30 SERIES OVERHAUL MANUALS
PUBLICATION NO. 14W3
ROLLS– VENDOR VENDOR CHAPTER

ROYCE P/N P/N CODE DESCRIPTION NO.
6870885 43754 83311 EXCITER ASSY, Ignition 74–10–01

6895573 49522 83311 EXCITER ASSY, Ignition 74–10–04
6899093 10–614950–1 59501 EXCITER ASSY, Ignition 74–10–05
23033846 2524745–22 9X173 CONTROL ASSY, Gas Producer Fuel 73–20–02

23057873 2524692–10 9X173 GOVERNOR ASSY, Power Turbine Fuel 73–20–01

6894080 5000950D 99167 PUMP ASSY, Fuel 73–10–06

6896344 5004506 99167 PUMP ASSY, Fuel 73–10–01
6896810 394400–1 59875 PUMP ASSY, Fuel 73–10–02
6896822 388100–5 68037 PUMP ASSY, Fuel 73–10–07
23057339 113310–01A1 11599 PUMP ASSY, Fuel 73–10–08
23057340 113320–01A1 11599 PUMP ASSY, Fuel 73–10–08
VENDOR MANUALS
PAGE 1
DEC 15/01
VENDOR MANUALS
PAGE 2
SEP 1/98
TOTAL
PART NUMBER CH –SE –UN FIG – ITEM REQD
AN100036 72–05–00 1 – 18 1
72–60–00 1 – 54 2
72–60–00 2 – 51 3
72–60–00 3 – 45 2
72–60–00 4 – 46 1
AN100043 72–05–00 1 – 24 2
72–05–00 4 – 17 2
AN101006 72–00–00 1 – 25 1
72–00–00 2 – 25 1
72–00–00 3 – 25 1
72–50–00 1 – 37 2
72–50–00 2 – 3 1
77–20–00 1 – 10 REF
AN101007 72–00–00 4 – 4 1
72–00–00 4 – 7 1
72–00–00 5 – 4 1
72–00–00 5 – 7 1
72–00–00 6 – 4 1
72–00–00 6 – 7 1
72–05–00 1 – 33 ALT
72–05–00 3 – 31 ALT
72–05–00 4 – 25 ALT
73–10–00 3 – 8 1
73–20–00 1 – 7 2
73–20–00 1 – 13 3
73–20–00 1 – 30 1
73–20–00 2 – 8 1
73–20–00 2 – 23 1
73–20–00 3 – 4 1
73–20–00 4 – 8 1
73–20–00 4 – 23 2
73–20–00 4 – 31 1
73–20–00 5 – 6 2
73–20–00 5 – 11 1
73–20–00 5 – 21 1
73–20–00 5 – 38 1
73–20–00 6 – 4 1
73–21–00 1 – 5 1
73–21–00 1 – 8 1
73–21–00 1 – 13 3
73–21–00 1 – 17 1
73–21–00 1 – 21 1
73–21–00 2 – 3 1
73–21–00 2 – 4 2
73–21–00 2 – 5 1
73–21–00 2 – 6 1
73–21–00 2 – 7 1
73–21–00 2 – 8 1
73–21–00 3 – 3 1
73–21–00 3 – 4 1
NUMERICAL INDEX
ALPHA
PAGE 1
DEC 15/01
TOTAL
AN101007 73–21–00 3 – 5 2
73–21–00 3 – 6 1
73–21–00 3 – 7 1
73–21–00 3 – 8 2
73–21–00 4 – 3 1
73–21–00 4 – 4 1
73–21–00 4 – 5 2
73–21–00 4 – 6 1
73–21–00 4 – 7 1
73–21–00 4 – 8 1
74–10–00 3 – 8 1
74–10–00 4 – 8 1
74–20–00 1 – 7 4
74–20–00 2 – 3 5
74–20–00 2 – 7 1
74–20–00 2 – 36 1
74–20–00 3 – 3 6
74–20–00 4 – 10 ALT
74–20–00 5 – 3 3
74–20–00 5 – 23 1
75–10–00 1 – 18 1
75–10–00 1 – 22 3
75–10–00 3 – 20 3
KITS 1 – 2 2
KITS 1 – 9 1
KITS 1 – 12 3
AN101008 73–20–00 2 – 11 1
73–20–00 4 – 11 1
74–10–00 1 – 2 ALT
74–20–00 4 – 4 ALT
KITS 1 – 10 1
AN101009 74–20–00 1 – 4 5
74–20–00 2 – 11 1
74–20–00 2 – 33 1
74–20–00 5 – 8 1
74–20–00 5 – 20 1
KITS 1 – 4 1
AN101010 73–21–00 2 – 15 ALT
73–21–00 3 – 14 ALT
73–21–00 4 – 14 ALT
AN101013 72–00–00 4 – 8 1
72–00–00 5 – 8 1
72–00–00 6 – 8 1
73–10–00 1 – 3 1
73–10–00 1 – 27 1
73–10–00 2 – 3 1
73–10–00 3 – 3 1
73–10–00 4 – 4 2
73–10–00 4 – 16 1
73–10–00 5 – 4 1
NUMERICAL INDEX
ALPHA
PAGE 2
DEC 15/01
TOTAL
AN101013 73–10–00 5 – 19 1
AN101024 73–20–00 1 – 39 2
73–20–00 2 – 32 2
73–20–00 4 – 41 2
73–20–00 5 – 34 2
74–20–00 3 – 8 2
74–20–00 4 – 12 2
75–10–00 1 – 16 2
75–10–00 1 – 34 2
75–10–00 2 – 16 2
75–10–00 3 – 16 2
75–10–00 3 – 31 2
75–10–00 4 – 16 2
KITS 1 – 1 2
KITS 1 – 3 2
KITS 1 – 9 2
AN101025 73–20–00 4 – 24 1
74–20–00 2 – 13 2
74–20–00 3 – 8 2
74–20–00 4 – 12 2
AN101037 73–10–00 5 – 5 1
AN104607 72–00–00 1 – 45 2
72–00–00 2 – 45 2
72–00–00 3 – 45 2
72–50–00 1 – 14 2
AN104620 72–60–00 7 – 17 1
AN117004 72–50–00 1 – 4 4
AN122704 72–60–00 15 – 16 2
72–60–00 16 – 14 2
AN122706 72–60–00 11 – 24 2
72–60–00 12 – 25 2
AN122707 72–60–00 11 – 25 2
72–60–00 12 – 26 2
AN122717 72–60–00 15 – 20 2
72–60–00 16 – 18 2
AN125402 72–50–00 1 – 4 4
AN150520 72–60–00 13 – 11 7
72–60–00 14 – 9 6
72–60–00 15 – 4 10
72–60–00 16 – 4 10
AN150521 72–60–00 13 – 11 AR
72–60–00 14 – 9 AR
72–60–00 15 – 4 AR
72–60–00 16 – 4 AR
AN150522 72–60–00 13 – 11 AR
72–60–00 14 – 9 AR
72–60–00 15 – 4 AR
72–60–00 16 – 4 AR
AN150523 72–60–00 13 – 11 AR
72–60–00 14 – 9 AR
NUMERICAL INDEX
ALPHA
PAGE 3
DEC 15/01
TOTAL
AN150523 72–60–00 15 – 4 AR
72–60–00 16 – 4 AR
AN150524 72–60–00 13 – 11 AR
72–60–00 14 – 9 AR
72–60–00 15 – 4 AR
72–60–00 16 – 4 AR
AN150532 72–60–00 13 – 3 2
72–60–00 14 – 3 2
AN150533 72–60–00 13 – 3 AR
72–60–00 14 – 3 AR
AN150534 72–60–00 13 – 3 AR
72–60–00 14 – 3 AR
AN150535 72–60–00 13 – 3 AR
72–60–00 14 – 3 AR
AN150536 72–60–00 13 – 3 AR
72–60–00 14 – 3 AR
AN150538 72–60–00 15 – 12 3
72–60–00 16 – 10 3
AN150539 72–60–00 15 – 12 AR
72–60–00 16 – 10 AR
AN150540 72–60–00 15 – 12 AR
72–60–00 16 – 10 AR
AN150541 72–60–00 15 – 12 AR
72–60–00 16 – 10 AR
AN150542 72–60–00 15 – 12 AR
72–60–00 16 – 10 AR
AN150550 72–60–00 13 – 14 6
72–60–00 14 – 12 6
72–60–00 15 – 13 2
72–60–00 15 – 17 23
72–60–00 16 – 11 2
72–60–00 16 – 15 23
AN150551 72–60–00 13 – 14 AR
72–60–00 14 – 12 AR
72–60–00 15 – 13 AR
72–60–00 15 – 17 AR
72–60–00 16 – 11 AR
72–60–00 16 – 15 AR
AN150552 72–60–00 13 – 14 AR
72–60–00 14 – 12 AR
72–60–00 15 – 13 AR
72–60–00 15 – 17 AR
72–60–00 16 – 11 AR
72–60–00 16 – 15 AR
AN150553 72–60–00 13 – 14 AR
72–60–00 14 – 12 AR
72–60–00 15 – 13 AR
72–60–00 15 – 17 AR
72–60–00 16 – 11 AR
72–60–00 16 – 15 AR
NUMERICAL INDEX
ALPHA
PAGE 4
DEC 15/01
TOTAL
AN150554 72–60–00 13 – 14 AR
72–60–00 14 – 12 AR
72–60–00 15 – 13 AR
72–60–00 15 – 17 AR
72–60–00 16 – 11 AR
72–60–00 16 – 15 AR
AN150556 72–60–00 13 – 15 1
72–60–00 14 – 13 1
AN150557 72–60–00 13 – 15 AR
72–60–00 14 – 13 AR
AN150558 72–60–00 13 – 15 AR
72–60–00 14 – 13 AR
AN150559 72–60–00 13 – 15 AR
72–60–00 14 – 13 AR
AN150560 72–60–00 13 – 15 AR
72–60–00 14 – 13 AR
AN150574 72–60–00 13 – 16 4
72–60–00 14 – 14 4
72–60–00 15 – 14 1
72–60–00 16 – 12 1
AN150575 72–60–00 13 – 16 AR
72–60–00 14 – 14 AR
72–60–00 15 – 14 AR
72–60–00 16 – 12 AR
AN150576 72–60–00 13 – 16 AR
72–60–00 14 – 14 AR
72–60–00 15 – 14 AR
72–60–00 16 – 12 AR
AN150577 72–60–00 13 – 16 AR
72–60–00 14 – 14 AR
72–60–00 15 – 14 AR
72–60–00 16 – 12 AR
AN150578 72–60–00 13 – 16 AR
72–60–00 14 – 14 AR
72–60–00 15 – 14 AR
72–60–00 16 – 12 AR
AN150592 72–60–00 15 – 15 2
72–60–00 16 – 13 2
AN150593 72–60–00 15 – 15 AR
72–60–00 16 – 13 AR
AN150594 72–60–00 15 – 15 AR
72–60–00 16 – 13 AR
AN150595 72–60–00 15 – 15 AR
72–60–00 16 – 13 AR
AN150596 72–60–00 15 – 15 AR
72–60–00 16 – 13 AR
AN150826 72–60–00 13 – 13 1
72–60–00 14 – 11 7
72–60–00 15 – 9 6
72–60–00 16 – 7 6
NUMERICAL INDEX
ALPHA
PAGE 5
DEC 15/01
TOTAL
AN150827 72–60–00 13 – 13 AR
72–60–00 14 – 11 AR
72–60–00 15 – 9 AR
72–60–00 16 – 7 AR
AN150828 72–60–00 13 – 13 AR
72–60–00 14 – 11 AR
72–60–00 15 – 9 AR
72–60–00 16 – 7 AR
AN150829 72–60–00 13 – 13 AR
72–60–00 14 – 11 AR
72–60–00 15 – 9 AR
72–60–00 16 – 7 AR
AN150830 72–60–00 13 – 13 AR
72–60–00 14 – 11 AR
72–60–00 15 – 9 AR
72–60–00 16 – 7 AR
AN150832 72–60–00 13 – 4 3
72–60–00 14 – 4 3
72–60–00 15 – 3 14
72–60–00 16 – 3 8
AN150833 72–60–00 13 – 4 AR
72–60–00 14 – 4 AR
72–60–00 15 – 3 AR
72–60–00 16 – 3 AR
AN150834 72–60–00 13 – 4 AR
72–60–00 14 – 4 AR
72–60–00 15 – 3 AR
72–60–00 16 – 3 AR
AN150835 72–60–00 13 – 4 AR
72–60–00 14 – 4 AR
72–60–00 15 – 3 AR
72–60–00 16 – 3 AR
AN150836 72–60–00 13 – 4 AR
72–60–00 14 – 4 AR
72–60–00 15 – 3 AR
72–60–00 16 – 3 AR
AN150850 72–60–00 13 – 7 3
72–60–00 14 – 6 3
72–60–00 15 – 21 6
72–60–00 16 – 19 12
AN150851 72–60–00 13 – 7 AR
72–60–00 14 – 6 AR
72–60–00 15 – 21 AR
72–60–00 16 – 19 AR
AN150852 72–60–00 13 – 7 AR
72–60–00 14 – 6 AR
72–60–00 15 – 21 AR
72–60–00 16 – 19 AR
AN150853 72–60–00 13 – 7 AR
72–60–00 14 – 6 AR
NUMERICAL INDEX
ALPHA
PAGE 6
DEC 15/01
TOTAL
AN150853 72–60–00 15 – 21 AR
72–60–00 16 – 19 AR
AN150854 72–60–00 13 – 7 AR
72–60–00 14 – 6 AR
72–60–00 15 – 21 AR
72–60–00 16 – 19 AR
AN150862 72–60–00 13 – 5 6
AN150863 72–60–00 13 – 5 AR
AN150864 72–60–00 13 – 5 AR
AN150865 72–60–00 13 – 5 AR
AN150866 72–60–00 13 – 5 AR
AN150940 72–60–00 15 – 19 6
72–60–00 16 – 17 6
AN150941 72–60–00 15 – 19 AR
72–60–00 16 – 17 AR
AN150942 72–60–00 15 – 19 AR
72–60–00 16 – 17 AR
AN150943 72–60–00 15 – 19 AR
72–60–00 16 – 17 AR
AN150944 72–60–00 15 – 19 AR
72–60–00 16 – 17 AR
AN150958 72–60–00 15 – 18 5
72–60–00 16 – 16 5
AN150959 72–60–00 15 – 18 AR
72–60–00 16 – 16 AR
AN150960 72–60–00 15 – 18 AR
72–60–00 16 – 16 AR
AN150961 72–60–00 15 – 18 AR
72–60–00 16 – 16 AR
AN150962 72–60–00 15 – 18 AR
72–60–00 16 – 16 AR
AN154719 72–60–00 13 – 12 AR
72–60–00 14 – 10 AR
AN154720 72–60–00 13 – 12 6
72–60–00 14 – 10 6
AN154721 72–60–00 13 – 12 AR
72–60–00 14 – 10 AR
AN154722 72–60–00 13 – 12 AR
72–60–00 14 – 10 AR
AN154723 72–60–00 13 – 12 AR
72–60–00 14 – 10 AR
AN154724 72–60–00 13 – 12 AR
72–60–00 14 – 10 AR
AN3–3A 72–05–00 1 – 33 2
72–05–00 3 – 31 1
72–05–00 4 – 25 2
AN364–1032 74–10–00 1 – 5 1
74–10–00 2 – 4 1
74–10–00 3 – 4 1
74–10–00 4 – 4 1
NUMERICAL INDEX
ALPHA
PAGE 7
DEC 15/01
TOTAL
AN500D4–6 73–20–00 7 – 18 4
75–10–00 6 – 17 4
AN503–10–10 75–10–00 5 – 24 4
AN73–17 75–10–00 5 – 6 3
AN775–16D 72–00–00 1 – 27 1
72–00–00 2 – 27 1
72–00–00 3 – 27 1
AN804–4J 73–20–00 1 – 34 1
73–20–00 4 – 36 1
73–20–00 5 – 29 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
KITS 1 – 9 1
AN804–4K 73–20–00 1 – 34 ALT
73–20–00 4 – 36 ALT
73–20–00 5 – 29 ALT
KITS 1 – 1 ALT
KITS 1 – 2 ALT
KITS 1 – 3 ALT
KITS 1 – 9 ALT
AN804J4 73–20–00 2 – 27 1
75–10–00 1 – 28 1
75–10–00 3 – 25 1
AN804J5 73–20–00 1 – 62 1
73–20–00 4 – 56 1
73–20–00 5 – 56 1
AN804K4 73–20–00 2 – 27 ALT
75–10–00 1 – 28 ALT
75–10–00 3 – 25 ALT
AN804K5 73–20–00 1 – 62 ALT
73–20–00 4 – 56 ALT
73–20–00 5 – 56 ALT
AN814–5DL 73–10–00 7 – 13 2
AN815–4J 72–00–00 4 – 23 1
72–00–00 5 – 23 1
72–00–00 6 – 23 1
73–10–00 1 – 31 2
73–10–00 4 – 7 2
73–10–00 5 – 9 2
73–20–00 1 – 40 3
73–20–00 1 – 56 1
73–20–00 1 – 57 1
73–20–00 1 – 73 1
73–20–00 2 – 33 3
73–20–00 2 – 44A 1
73–20–00 2 – 44 1
73–20–00 2 – 51 1
73–20–00 3 – 15 1
73–20–00 4 – 42 3
NUMERICAL INDEX
ALPHA
PAGE 8
DEC 15/01
TOTAL
AN815–4J 73–20–00 4 – 53 1
73–20–00 4 – 62 1
73–20–00 5 – 53 1
73–20–00 6 – 15 1
KITS 1 – 4 1
KITS 1 – 10 2
AN815–4K 72–00–00 4 – 23 ALT
72–00–00 5 – 23 ALT
72–00–00 6 – 23 ALT
73–10–00 1 – 31 ALT
73–10–00 4 – 7 ALT
73–10–00 5 – 9 ALT
73–20–00 1 – 40 ALT
73–20–00 1 – 56 ALT
73–20–00 1 – 57 ALT
73–20–00 1 – 73 ALT
73–20–00 2 – 33 ALT
73–20–00 2 – 44A ALT
73–20–00 2 – 44 ALT
73–20–00 2 – 51 ALT
73–20–00 3 – 15 ALT
73–20–00 4 – 42 ALT
73–20–00 4 – 53 ALT
73–20–00 4 – 62 ALT
73–20–00 5 – 53 ALT
73–20–00 6 – 15 ALT
KITS 1 – 4 ALT
KITS 1 – 10 ALT
AN815–5J 73–20–00 1 – 61 1
73–20–00 2 – 46 2
73–20–00 4 – 55 1
73–20–00 5 – 55 1
AN815–5K 73–20–00 1 – 61 ALT
73–20–00 2 – 46 ALT
73–20–00 4 – 55 ALT
73–20–00 5 – 55 ALT
AN815–8J 73–10–00 3 – 11 1
73–10–00 4 – 19 1
73–10–00 5 – 24 1
AN815–8K 73–10–00 3 – 11 ALT
73–10–00 4 – 19 ALT
73–10–00 5 – 24 ALT
AN821–4J 73–20–00 4 – 28 1
AN821–4K 73–20–00 4 – 28 ALT
AN832–4J 73–20–00 1 – 22 1
73–20–00 1 – 40 3
73–20–00 2 – 16 1
73–20–00 3 – 14 2
73–20–00 4 – 16 1
73–20–00 5 – 24 1
NUMERICAL INDEX
ALPHA
PAGE 9
DEC 15/01
TOTAL
AN832–4J 73–20–00 6 – 14 2
KITS 1 – 4 1
AN832–4K 73–20–00 1 – 22 ALT
73–20–00 1 – 40 ALT
73–20–00 2 – 16 ALT
73–20–00 3 – 14 ALT
73–20–00 4 – 16 ALT
73–20–00 5 – 24 ALT
73–20–00 6 – 14 ALT
KITS 1 – 4 ALT
AN833–3J 75–10–00 1 – 37 1
AN833–4J 72–00–00 4 – 20 1
72–00–00 5 – 20 1
72–00–00 6 – 20 1
72–50–00 1 – 24 1
73–10–00 4 – 11 1
73–10–00 5 – 13 1
73–20–00 1 – 53 1
73–20–00 1 – 68 1
73–20–00 2 – 41 1
73–20–00 4 – 50 1
73–20–00 5 – 50 1
KITS 1 – 9 1
AN833–4K 72–00–00 4 – 20 ALT
72–00–00 5 – 20 ALT
72–00–00 6 – 20 ALT
72–50–00 1 – 24 ALT
73–10–00 4 – 11 ALT
73–10–00 5 – 13 ALT
73–20–00 1 – 53 ALT
73–20–00 1 – 68 ALT
73–20–00 2 – 41 ALT
73–20–00 4 – 50 ALT
73–20–00 5 – 50 ALT
KITS 1 – 9 ALT
AN833–8J 73–10–00 1 – 9 1
73–10–00 3 – 10 1
73–10–00 4 – 18 1
73–10–00 5 – 23 1
AN833–8K 73–10–00 1 – 9 ALT
73–10–00 3 – 10 ALT
73–10–00 4 – 18 ALT
73–10–00 5 – 23 ALT
AN837–5J 72–00–00 4 – 17 2
72–00–00 5 – 17 2
72–00–00 6 – 17 2
AN837–5K 72–00–00 4 – 17 ALT
72–00–00 5 – 17 ALT
72–00–00 6 – 17 ALT
AN837–8J 73–10–00 1 – 8 3
NUMERICAL INDEX
ALPHA
PAGE 10
DEC 15/01
TOTAL
AN837–8J 73–10–00 3 – 9 2
73–10–00 4 – 17 2
73–10–00 5 – 22 2
AN837–8K 73–10–00 1 – 8 ALT
73–10–00 3 – 9 ALT
73–10–00 4 – 17 ALT
73–10–00 5 – 22 ALT
AN901–16A 72–00–00 1 – 28 2
72–00–00 2 – 28 2
72–00–00 3 – 28 2
AN919–2J 75–10–00 1 – 3 1
75–10–00 1 – 35 1
75–10–00 2 – 3 1
75–10–00 3 – 3 1
75–10–00 3 – 32 1
75–10–00 4 – 3 1
AN919–2K 75–10–00 1 – 3 ALT
75–10–00 1 – 35 ALT
75–10–00 2 – 3 ALT
75–10–00 3 – 3 ALT
75–10–00 3 – 32 ALT
75–10–00 4 – 3 ALT
AN919–3J 73–20–00 1 – 71 1
AN919–3K 73–20–00 1 – 71 ALT
AN919–4K 75–10–00 3 – 28 ALT
AN919–5J 75–10–00 1 – 7 1
75–10–00 2 – 7 1
75–10–00 3 – 7 1
75–10–00 4 – 7 1
AN924–3D 75–10–00 5 – 45 1
AN924–3J 75–10–00 1 – 38 1
75–10–00 5 – 45 ALT
AN924–3K 75–10–00 5 – 45 ALT
AN924–4J 72–00–00 4 – 21 1
72–00–00 5 – 21 1
72–00–00 6 – 21 1
72–50–00 1 – 22 1
73–10–00 4 – 12 1
73–10–00 5 – 14 1
73–20–00 1 – 23 1
73–20–00 1 – 35 1
73–20–00 1 – 54 1
73–20–00 1 – 69 1
73–20–00 2 – 17 1
73–20–00 2 – 28 1
73–20–00 2 – 42 1
73–20–00 3 – 12 2
73–20–00 4 – 17 1
73–20–00 4 – 37 1
73–20–00 4 – 51 1
NUMERICAL INDEX
ALPHA
PAGE 11
DEC 15/01
TOTAL
AN924–4J 73–20–00 5 – 25 1
73–20–00 5 – 30 1
73–20–00 5 – 51 1
73–20–00 6 – 12 2
75–10–00 1 – 29 1
75–10–00 1 – 41 1
75–10–00 2 – 19 1
75–10–00 3 – 26 1
75–10–00 3 – 38 1
75–10–00 4 – 19 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
KITS 1 – 4 1
KITS 1 – 9 2
AN924–4K 72–00–00 4 – 21 ALT
72–00–00 5 – 21 ALT
72–00–00 6 – 21 ALT
72–50–00 1 – 22 ALT
73–10–00 4 – 12 ALT
73–10–00 5 – 14 ALT
73–20–00 1 – 23 ALT
73–20–00 1 – 35 ALT
73–20–00 1 – 54 ALT
73–20–00 1 – 69 ALT
73–20–00 2 – 17 ALT
73–20–00 2 – 28 ALT
73–20–00 2 – 42 ALT
73–20–00 3 – 12 ALT
73–20–00 4 – 17 ALT
73–20–00 4 – 37 ALT
73–20–00 4 – 51 ALT
73–20–00 5 – 25 ALT
73–20–00 5 – 30 ALT
73–20–00 5 – 51 ALT
73–20–00 6 – 12 ALT
75–10–00 1 – 29 ALT
75–10–00 1 – 41 ALT
75–10–00 2 – 19 ALT
75–10–00 3 – 26 ALT
75–10–00 3 – 38 ALT
75–10–00 4 – 19 ALT
KITS 1 – 1 ALT
KITS 1 – 2 ALT
KITS 1 – 3 ALT
KITS 1 – 4 ALT
KITS 1 – 9 ALT
AN924–5J 72–00–00 4 – 18 2
72–00–00 5 – 18 2
72–00–00 6 – 18 2
NUMERICAL INDEX
ALPHA
PAGE 12
DEC 15/01
TOTAL
AN924–5J 73–20–00 1 – 63 1
73–20–00 4 – 57 1
73–20–00 5 – 57 1
AN924–5K 72–00–00 4 – 18 ALT
72–00–00 5 – 18 ALT
72–00–00 6 – 18 ALT
73–20–00 1 – 63 ALT
73–20–00 4 – 57 ALT
73–20–00 5 – 57 ALT
AN924–6S 72–50–00 1 – 10 1
AN924–8J 73–10–00 1 – 10 4
73–10–00 3 – 12 3
73–10–00 4 – 20 3
73–10–00 5 – 25 3
AN924–8K 73–10–00 1 – 10 ALT
73–10–00 3 – 12 ALT
73–10–00 4 – 20 ALT
73–10–00 5 – 25 ALT
AN929–3J 75–10–00 2 – 1 1
AN929–3K 75–10–00 2 – 1 ALT
AN929–4J 72–00–00 1 – 18 1
72–00–00 2 – 18 1
72–00–00 3 – 18 1
73–20–00 1 – 76 1
73–20–00 2 – 53 1
73–20–00 4 – 65 1
73–20–00 5 – 63 1
75–10–00 1 – 31 1
75–10–00 3 – 28 1
AN929–4K 72–00–00 1 – 18 ALT
72–00–00 2 – 18 ALT
72–00–00 3 – 18 ALT
73–20–00 1 – 76 ALT
73–20–00 2 – 53 ALT
73–20–00 4 – 65 ALT
73–20–00 5 – 63 ALT
75–10–00 1 – 31 ALT
AN929–5J 73–20–00 1 – 75 1
73–20–00 4 – 64 1
73–20–00 5 – 62 1
AN929–5K 73–20–00 1 – 75 ALT
73–20–00 4 – 64 ALT
73–20–00 5 – 62 ALT
AN939D–4 73–10–00 4 – 9 1
73–10–00 5 – 11 1
AN939D4 73–10–00 1 – 33 1
73–20–00 1 – 42 1
73–20–00 4 – 44 1
KITS 1 – 10 1
AN960–10 72–05–00 1 – 34 2
NUMERICAL INDEX
ALPHA
PAGE 13
DEC 15/01
TOTAL
AN960–10 72–05–00 3 – 32 1
72–05–00 4 – 26 2
74–10–00 4 – 5 1
AN960–10L 72–00–00 1 – 46 2
72–00–00 2 – 46 2
72–00–00 3 – 46 2
73–21–00 1 – 4 1
73–21–00 1 – 18 1
73–21–00 1 – 29 3
73–21–00 2 – 3 1
73–21–00 2 – 8 1
73–21–00 2 – 16 2
73–21–00 3 – 3 1
73–21–00 3 – 15 2
73–21–00 4 – 3 1
73–21–00 4 – 7 1
73–21–00 4 – 15 2
74–10–00 1 – 4 6
74–10–00 1 – 6 1
74–10–00 2 – 3 3
74–10–00 2 – 5 1
74–10–00 3 – 3 3
74–10–00 3 – 5 1
74–10–00 3 – 9 1
74–10–00 4 – 3 3
74–10–00 4 – 9 1
74–20–00 2 – 35 1
74–20–00 5 – 9 1
74–20–00 5 – 22 1
KITS 1 – 1 3
KITS 1 – 2 3
KITS 1 – 3 3
AN960–716 72–50–00 1 – 23 2
73–20–00 1 – 24 2
73–20–00 2 – 18 2
73–20–00 3 – 13 4
73–20–00 4 – 18 2
73–20–00 5 – 26 2
73–20–00 6 – 13 4
KITS 1 – 4 2
AN960C10 72–60–00 10 – 14 8
AN960C10L 72–00–00 1 – 43 7
72–00–00 2 – 43 7
72–00–00 3 – 43 7
72–30–00 1 – 4 3
72–50–00 1 – 15 2
75–10–00 5 – 7 3
AN960C416L 72–00–00 1 – 6A 6
73–10–00 3 – 17 3
73–10–00 4 – 25 3
NUMERICAL INDEX
ALPHA
PAGE 14
DEC 15/01
TOTAL
AN960C416L 73–10–00 5 – 30 3
73–20–00 3 – 17 2
73–20–00 6 – 18 2
KITS 1 – 4 2
AN960C916L 72–50–00 1 – 11 1
AN960D10L 73–21–00 1 – 35 2
AN960XC916L 72–60–00 6 – 36 1
72–60–00 8 – 31 1
AS3068–14 72–60–00 6 – 35 1
AS3069–14 72–60–00 6 – 35 ALT
AS3084–03 72–00–00 4 – 16 1
72–00–00 5 – 16 1
72–00–00 6 – 16 1
72–30–00 1 – 9 1
72–40–00 1 – 17 2
75–10–00 1 – 39 1
AS3084–04 72–00–00 4 – 22 1
72–00–00 5 – 22 1
72–00–00 6 – 22 1
73–10–00 1 – 32 3
73–10–00 4 – 8 5
73–10–00 4 – 13 1
73–10–00 5 – 10 4
73–10–00 5 – 15 1
73–20–00 1 – 36 1
73–20–00 1 – 41 4
73–20–00 1 – 55 1
73–20–00 1 – 59 1
73–20–00 1 – 60 1
73–20–00 1 – 70 1
73–20–00 1 – 74 1
73–20–00 2 – 29 1
73–20–00 2 – 34 3
73–20–00 2 – 43 1
73–20–00 2 – 45A 1
73–20–00 2 – 45B 1
73–20–00 2 – 45 1
73–20–00 2 – 52 1
73–20–00 3 – 16 2
73–20–00 4 – 38 1
73–20–00 4 – 43 4
73–20–00 4 – 52 1
73–20–00 4 – 54 1
73–20–00 4 – 63 1
73–20–00 5 – 31 1
73–20–00 5 – 52 1
73–20–00 5 – 54 1
73–20–00 6 – 16 2
74–20–00 2 – 14 ALT
75–10–00 1 – 4 1
NUMERICAL INDEX
ALPHA
PAGE 15
DEC 15/01
TOTAL
AS3084–04 75–10–00 1 – 30 1
75–10–00 1 – 36 1
75–10–00 1 – 42 1
75–10–00 2 – 4 1
75–10–00 2 – 20 1
75–10–00 3 – 4 1
75–10–00 3 – 27 1
75–10–00 3 – 33 1
75–10–00 3 – 39 1
75–10–00 4 – 4 1
75–10–00 4 – 20 1
75–10–00 5 – 16 3
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
KITS 1 – 4 1
KITS 1 – 9 2
KITS 1 – 10 3
AS3084–05 72–00–00 4 – 14 1
72–00–00 4 – 19 2
72–00–00 5 – 14 1
72–00–00 5 – 19 2
72–00–00 6 – 14 1
72–60–00 1 – 21 2
72–60–00 1 – 27 2
72–60–00 2 – 20 2
72–60–00 2 – 26 2
73–20–00 1 – 72 1
AS3084–08 73–10–00 1 – 11 4
73–10–00 3 – 13 4
73–10–00 4 – 21 4
73–10–00 5 – 26 4
AS3085–007 75–10–00 5 – 19 1
AS3085–008 72–60–00 7 – 23 1
72–60–00 8 – 22 1
AS3085–010 72–60–00 1 – 8 1
72–60–00 2 – 8 1
72–60–00 3 – 8 1
72–60–00 4 – 8 1
72–60–00 9 – 43 3
AS3085–011 72–60–00 1 – 19 3
72–60–00 2 – 18 3
72–60–00 3 – 18 3
72–60–00 4 – 18 3
72–60–00 7 – 22 1
72–60–00 8 – 21 1
72–60–00 9 – 36 1
72–60–00 9 – 39 1
72–60–00 9 – 43 3
AS3085–012 72–60–00 9 – 32 4
NUMERICAL INDEX
ALPHA
PAGE 16
DEC 15/01
TOTAL
AS3085–012 72–60–00 9 – 46 12
72–60–00 10 – 9 1
72–60–00 10 – 18 2
AS3085–013 72–60–00 9 – 10 2
72–60–00 11 – 20 1
72–60–00 11 – 30 1
72–60–00 12 – 21 2
72–60–00 12 – 31 2
AS3085–014 72–60–00 9 – 2 1
72–60–00 9 – 12 1
72–60–00 9 – 48 2
72–60–00 10 – 21 2
72–60–00 10 – 23 6
72–60–00 10 – 26 1
72–60–00 10 – 28 2
AS3085–015 72–60–00 1 – 25 2
72–60–00 2 – 24 2
72–60–00 9 – 22 1
72–60–00 10 – 23 3
72–60–00 13 – 20 1
72–60–00 14 – 16 1
72–60–00 15 – 8 1
72–60–00 16 – 6 1
AS3085–016 72–60–00 9 – 3 1
72–60–00 11 – 31 1
72–60–00 12 – 32 1
AS3085–017 72–60–00 11 – 9 1
72–60–00 12 – 9 1
AS3085–018 72–30–00 2 – 33 2
72–60–00 11 – 21 1
72–60–00 12 – 22 1
KITS 1 – 6 1
KITS 1 – 7 1
KITS 1 – 16 2
KITS 1 – 17 2
AS3085–019 72–00–00 1 – 30 1
72–00–00 2 – 30 1
72–00–00 3 – 30 1
KITS 1 – 16 1
KITS 1 – 17 1
AS3085–020 72–60–00 5 – 14 1
72–60–00 6 – 14 1
72–60–00 9 – 17 1
72–60–00 10 – 16 1
AS3085–022 72–30–00 1 – 30 2
KITS 1 – 5 2
AS3085–024 72–30–00 1 – 17 2
AS3085–031 72–60–00 7 – 13 2
72–60–00 8 – 13 2
AS3085–041 72–30–00 2 – 2 1
NUMERICAL INDEX
ALPHA
PAGE 17
DEC 15/01
TOTAL
AS3085–044 72–60–00 8 – 37 1
72–60–00 16 – 39 1
AS3085–111 72–60–00 1 – 17 3
72–60–00 2 – 16 2
72–60–00 3 – 16 2
72–60–00 3 – 52 1
72–60–00 4 – 16 2
72–60–00 4 – 53 1
KITS 1 – 2 2
AS3085–113 72–60–00 5 – 49 1
73–10–00 1 – 20 1
73–10–00 2 – 11 1
73–10–00 3 – 25 1
73–10–00 4 – 33 1
73–10–00 5 – 38 1
AS3085–116 72–60–00 10 – 10 1
AS3085–122 73–20–00 1 – 19 ALT
73–20–00 2 – 14B ALT
73–20–00 4 – 14B ALT
AS3085–123 72–60–00 6 – 30 1
72–60–00 8 – 33 1
AS3085–126 72–60–00 9 – 8 1
AS3085–129 72–60–00 7 – 30 2
72–60–00 8 – 28 2
AS3085–140 72–60–00 7 – 12 1
AS3085–158 72–50–00 2 – 29 1
KITS 1 – 16 1
KITS 1 – 17 1
AS3085–159 72–60–00 13 – 22 1
72–60–00 14 – 18 1
AS3085–227 72–60–00 7 – 12 1
72–60–00 8 – 12 1
AS3208–04 73–20–00 1 – 10B 1
73–20–00 2 – 10B 1
73–20–00 4 – 10B 1
73–20–00 5 – 4B 1
74–20–00 2 – 14 1
AS3209–142 72–60–00 6 – 31B ALT
72–60–00 8 – 38 ALT
AS3216–124 72–60–00 5 – 26A 1
AS3221 72–05–00 1 – 24 ALT
72–05–00 4 – 17 ALT
AS3222 72–05–00 1 – 18 ALT
72–60–00 1 – 54 ALT
72–60–00 2 – 51 ALT
72–60–00 3 – 45 ALT
72–60–00 4 – 46 1
D4 73–20–00 2 – 35 1
GT11768 KITS 1 – 14 1
KITS 1 – 18 1
NUMERICAL INDEX
ALPHA
PAGE 18
DEC 15/01
TOTAL
IN5550 73–21–00 5 – 27 2
73–21–00 7 – 27 2
73–21–00 8 – 28 1
MIL–C–16173 HISTORICAL PARTS
MIL–D–3464 HISTORICAL PARTS
MIL–L–23699 72–05–00 1 – 36 AR
HISTORICAL PARTS
MIL–L–6081 72–05–00 1 – 37 AR
HISTORICAL PARTS
MIL–S46163 73–21–00 5 – 30 AR
73–21–00 6 – 36 AR
73–21–00 7 – 30 AR
73–21–00 8 – 31 AR
MS122054 72–00–00 1 – 4 2
72–00–00 2 – 4 2
72–00–00 3 – 4 2
72–60–00 1 – 4 2
72–60–00 2 – 4 2
72–60–00 3 – 4 2
72–60–00 4 – 4 2
MS122902 72–50–00 2 – 4 1
MS122910 72–30–00 2 – 6 1
MS122911 KITS 1 – 14 1
KITS 1 – 18 1
MS122914 72–00–00 1 – 26 1
72–00–00 2 – 26 1
72–00–00 3 – 26 1
MS122915 72–00–00 1 – 26 ALT
72–00–00 2 – 26 ALT
72–00–00 3 – 26 ALT
MS124658 72–60–00 15 – 38 2
72–60–00 16 – 34 2
MS124659 72–60–00 13 – 33 1
72–60–00 15 – 39 1
72–60–00 16 – 35 1
MS124660 72–60–00 13 – 34 2
72–60–00 15 – 40 1
72–60–00 16 – 36 1
MS16625–4112 72–60–00 7 – 24 1
72–60–00 8 – 23 1
MS16627–4075 72–60–00 9 – 20 1
MS16633–4015 75–10–00 5 – 9 1
MS171468 75–10–00 5 – 25 1
MS171592 72–60–00 7 – 4 1
72–60–00 7 – 10 1
72–60–00 8 – 4 1
72–60–00 8 – 10 1
MS17295–031 72–60–00 13 – 6 8
72–60–00 14 – 5 8
72–60–00 15 – 37 4
NUMERICAL INDEX
ALPHA
PAGE 19
DEC 15/01
TOTAL
MS17295–031 72–60–00 16 – 33 4
MS17295–032 72–60–00 13 – 6 AR
72–60–00 14 – 5 AR
72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS17295–033 72–60–00 13 – 6 AR
72–60–00 14 – 5 AR
72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS17295–034 72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS17295–035 72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS17295–036 72–60–00 13 – 6 8
72–60–00 14 – 5 8
72–60–00 15 – 37 4
72–60–00 16 – 33 4
MS17295–037 72–60–00 13 – 6 AR
72–60–00 14 – 5 AR
72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS17295–038 72–60–00 13 – 6 AR
72–60–00 14 – 5 AR
72–60–00 15 – 37 AR
72–60–00 16 – 33 AR
MS20364–1032A 74–10–00 1 – 5 1
74–10–00 1 – 5 1
74–10–00 2 – 4 1
74–10–00 2 – 4 1
74–10–00 3 – 4 1
74–10–00 3 – 4 1
74–10–00 4 – 4 1
MS21043–01 72–60–00 4 – 47 4
MS21043–04 73–21–00 2 – 14 4
73–21–00 3 – 13 4
73–21–00 4 – 13 4
74–20–00 2 – 15 4
74–20–00 3 – 10 4
74–20–00 4 – 14 4
MS21043–06 74–10–00 1 – 8 2
74–10–00 2 – 7 2
74–10–00 3 – 7 2
74–10–00 4 – 7 2
MS21043–3 72–00–00 1 – 14 4
72–00–00 1 – 23 3
72–00–00 1 – 32 2
72–00–00 1 – 36 2
72–00–00 2 – 14 4
72–00–00 2 – 23 3
72–00–00 2 – 32 2
NUMERICAL INDEX
ALPHA
PAGE 20
DEC 15/01
TOTAL
MS21043–3 72–00–00 2 – 36 2
72–00–00 3 – 14 4
72–00–00 3 – 23 3
72–00–00 3 – 32 2
72–00–00 3 – 36 2
72–00–00 4 – 4 1
72–00–00 4 – 7 1
72–00–00 4 – 8 1
72–00–00 5 – 4 1
72–00–00 5 – 7 1
72–00–00 5 – 8 1
72–00–00 6 – 4 1
72–00–00 6 – 7 1
72–00–00 6 – 8 1
72–30–00 1 – 3 3
72–30–00 1 – 11 1
72–30–00 1 – 38 51
72–30–00 2 – 4 1
72–30–00 2 – 10 24
72–40–00 1 – 3 2
72–40–00 1 – 19 24
72–50–00 1 – 27 3
72–50–00 1 – 36 2
72–50–00 2 – 2 1
72–50–00 3 – 2 24
72–50–00 4 – 7 24
72–60–00 1 – 6 2
72–60–00 1 – 11 4
72–60–00 1 – 29 34
72–60–00 2 – 6 2
72–60–00 2 – 10 2
72–60–00 2 – 16B 2
72–60–00 2 – 28 34
72–60–00 2 – 56 2
72–60–00 3 – 6 2
72–60–00 3 – 10 2
72–60–00 3 – 22 32
72–60–00 3 – 50 2
72–60–00 4 – 6 2
72–60–00 4 – 10 2
72–60–00 4 – 22 34
72–60–00 5 – 25 4
72–60–00 5 – 33 6
72–60–00 6 – 23 4
72–60–00 6 – 38 6
72–60–00 7 – 18 1
72–60–00 7 – 29 3
72–60–00 8 – 18 1
72–60–00 8 – 27 3
72–60–00 9 – 6 2
NUMERICAL INDEX
ALPHA
PAGE 21
DEC 15/01
TOTAL
MS21043–3 72–60–00 9 – 14 8
72–60–00 9 – 34 1
72–60–00 9 – 38 1
72–60–00 10 – 25 1
73–10–00 1 – 2 1
73–10–00 1 – 26 1
73–10–00 2 – 2 1
73–10–00 3 – 2 1
73–10–00 3 – 8 1
73–10–00 4 – 3 2
73–10–00 4 – 16 1
73–10–00 5 – 3 1
73–10–00 5 – 18 1
73–20–00 1 – 29 1
73–20–00 1 – 6 2
73–20–00 1 – 12 3
73–20–00 1 – 38 2
73–20–00 2 – 7 1
73–20–00 2 – 22 1
73–20–00 2 – 31 2
73–20–00 3 – 3 1
73–20–00 4 – 7 1
73–20–00 4 – 22 3
73–20–00 4 – 30 1
73–20–00 4 – 40 2
73–20–00 5 – 5 2
73–20–00 5 – 10 1
73–20–00 5 – 20 1
73–20–00 5 – 33 2
73–20–00 5 – 37 1
73–20–00 6 – 3 1
73–21–00 1 – 3 1
73–21–00 1 – 7 1
73–21–00 1 – 12 3
73–21–00 1 – 16 1
73–21–00 1 – 20 1
73–21–00 1 – 23 2
73–21–00 2 – 3 1
73–21–00 2 – 4 2
73–21–00 2 – 5 1
73–21–00 2 – 6 1
73–21–00 2 – 7 1
73–21–00 2 – 8 1
73–21–00 3 – 3 1
73–21–00 3 – 4 1
73–21–00 3 – 5 2
73–21–00 3 – 6 1
73–21–00 3 – 7 1
73–21–00 3 – 8 2
73–21–00 4 – 3 1
NUMERICAL INDEX
ALPHA
PAGE 22
DEC 15/01
TOTAL
MS21043–3 73–21–00 4 – 4 1
73–21–00 4 – 5 2
73–21–00 4 – 6 1
73–21–00 4 – 7 1
73–21–00 4 – 8 1
73–21–00 4 – 9 2
74–10–00 1 – 3 3
74–10–00 3 – 2 3
74–10–00 4 – 2 3
74–20–00 1 – 3 9
74–20–00 2 – 2 8
74–20–00 2 – 6 1
74–20–00 2 – 32 1
74–20–00 3 – 2 8
74–20–00 4 – 3 11
74–20–00 5 – 2 4
74–20–00 5 – 19 1
75–10–00 1 – 15 2
75–10–00 1 – 18 1
75–10–00 1 – 21 3
75–10–00 1 – 33 2
75–10–00 2 – 15 2
75–10–00 3 – 15 2
75–10–00 3 – 19 3
75–10–00 3 – 30 2
75–10–00 4 – 15 2
77–20–00 1 – 9 REF
KITS 1 – 1 2
KITS 1 – 2 2
KITS 1 – 3 2
KITS 1 – 9 3
KITS 1 – 10 1
KITS 1 – 12 3
MS21043–3W 73–20–00 4 – 14 ALT
MS21043–4 72–00–00 1 – 6 6
72–00–00 2 – 6 6
72–00–00 3 – 6 6
72–05–00 1 – 26 8
72–05–00 1 – 14 6
72–05–00 2 – 14 6
72–05–00 2 – 23 8
72–05–00 3 – 14 6
72–05–00 3 – 23 8
72–05–00 4 – 18 8
72–60–00 1 – 32 17
72–60–00 2 – 30 17
72–60–00 3 – 25 17
72–60–00 4 – 25 17
72–60–00 6 – 33 6
72–60–00 8 – 35 6
NUMERICAL INDEX
ALPHA
PAGE 23
DEC 15/01
TOTAL
MS21043–4 73–10–00 1 – 13 3
73–10–00 1 – 17 3
73–10–00 2 – 8 3
73–10–00 3 – 22 3
73–10–00 4 – 30 3
73–10–00 5 – 35 3
73–20–00 1 – 44 3
73–20–00 1 – 66 3
73–20–00 2 – 37 3
73–20–00 2 – 49 3
73–20–00 3 – 18 2
73–20–00 4 – 46 3
73–20–00 4 – 60 3
73–20–00 5 – 42 3
73–20–00 5 – 60 3
73–20–00 6 – 17 2
73–20–00 7 – 17 4
75–10–00 6 – 16 4
MS21043–5 72–00–00 1 – 54 6
72–00–00 2 – 54 6
72–00–00 3 – 54 6
72–05–00 1 – 20 4
72–60–00 1 – 55 8
72–60–00 2 – 52 12
72–60–00 3 – 46 8
72–60–00 4 – 51 2
73–10–00 3 – 15 4
73–10–00 4 – 23 4
73–10–00 5 – 28 4
MS21044N4 72–05–00 1 – 25 6
72–05–00 2 – 22 6
72–05–00 3 – 22 6
MS21044N5 72–05–00 1 – 19 4
72–05–00 2 – 18 4
72–05–00 3 – 18 4
72–05–00 4 – 15 4
MS21048–08W 72–50–00 1 – 16A 4
MS21048–3W 72–00–00 1 – 38 7
72–00–00 2 – 38 7
72–00–00 3 – 38 7
72–50–00 1 – 16 2
72–50–00 3 – 4A 1
MS21053–3W 73–20–00 2 – 14 ALT
MS21056–3W 73–20–00 2 – 14 1
73–20–00 4 – 14 1
MS21083N3 74–10–00 1 – 5 1
74–10–00 2 – 4 1
74–10–00 3 – 4 1
74–10–00 4 – 4 1
MS24621–7 75–10–00 5 – 42 2
NUMERICAL INDEX
ALPHA
PAGE 24
DEC 15/01
TOTAL
MS25036–103 73–21–00 5 – 13 2
73–21–00 6 – 13 1
73–21–00 7 – 13 1
73–21–00 8 – 13 1
MS25083–2AC6 73–21–00 1 – 36 1
MS25171–1S 73–21–00 5 – 13 2
73–21–00 6 – 14 1
73–21–00 7 – 13 1
73–21–00 8 – 14 1
MS28775–015 72–00–00 4 – 26 AR
72–00–00 5 – 26 AR
72–00–00 6 – 26 AR
MS28778–04 74–20–00 2 – 14 ALT
MS29512–05 73–10–00 7 – 14 2
MS29512–12 73–10–00 7 – 17 1
MS29513–012 73–10–00 7 – 7 1
73–10–00 7 – 11 1
MS29513–232 73–10–00 7 – 12 1
MS3367–1–9 73–21–00 6 – 16 7
73–21–00 7 – 17 10
MS3367–3–9 73–21–00 6 – 16 7
73–21–00 7 – 17 10
MS3368–1–9A 73–21–00 5 – 14 2
73–21–00 6 – 15 3
73–21–00 7 – 14 2
73–21–00 8 – 15 2
MS3368–1–9B 73–21–00 5 – 15 11
73–21–00 8 – 16 8
MS3417–10N 73–21–00 6 – 9 1
MS3417–12N 73–21–00 5 – 11 1
73–21–00 6 – 12 1
73–21–00 7 – 11 1
73–21–00 8 – 11 1
MS3417–16N 73–21–00 5 – 8 1
73–21–00 7 – 8 1
73–21–00 8 – 8 1
MS3417–8N 73–21–00 5 – 10 2
73–21–00 7 – 10 3
73–21–00 8 – 10 1
MS3418–12N 72–60–00 1 – 13 ALT
MS3418–14N 73–21–00 5 – 12 1
73–21–00 6 – 8 1
73–21–00 7 – 12 1
73–21–00 8 – 12 1
MS3418–8N 73–21–00 5 – 9 5
73–21–00 6 – 10 ALT
73–21–00 7 – 9 4
73–21–00 8 – 9 4
MS3459KT8S–1S 73–21–00 6 – 5 2
73–21–00 8 – 4 2
NUMERICAL INDEX
ALPHA
PAGE 25
DEC 15/01
TOTAL
MS3459KT8S1S 73–21–00 5 – 4 2
73–21–00 7 – 4 2
MS3474E10–6P 73–21–00 6 – 4 1
MS3474E12–10P 73–21–00 6 – 6 1
MS3474L10–6P 73–21–00 6 – 4 1
MS3474L12–10P 73–21–00 6 – 6 1
MS35206–241 72–00–00 1 – 3 2
72–00–00 2 – 3 2
72–00–00 3 – 3 2
72–60–00 1 – 3 2
72–60–00 2 – 3 2
72–60–00 3 – 3 2
72–60–00 4 – 3 2
MS35333–71 73–21–00 1 – 37 1
MS35333–73 73–21–00 1 – 28 1
73–21–00 1 – 34 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
MS35333–75 73–21–00 1 – 34 1
MS35338–137 72–00–00 1 – 4 2
72–00–00 2 – 4 2
72–00–00 3 – 4 2
72–60–00 1 – 4 2
72–60–00 2 – 4 2
72–60–00 3 – 4 2
72–60–00 4 – 4 2
MS35338–43 73–21–00 1 – 34 1
MS51957–15 73–21–00 2 – 13 4
73–21–00 3 – 12 4
73–21–00 4 – 12 4
74–20–00 2 – 16 4
74–20–00 3 – 11 4
74–20–00 4 – 15 4
MS83248/1–122 73–20–00 1 – 19 ALT
73–20–00 5 – 16 1
MS9015–04 72–60–00 1 – 18 3
72–60–00 2 – 17 3
72–60–00 3 – 17 3
72–60–00 4 – 17 3
75–10–00 5 – 15 2
MS9016–10 72–60–00 15 – 24 2
72–60–00 16 – 22 2
MS9016–19 72–60–00 15 – 26 12
72–60–00 16 – 24 12
MS9020–05 73–20–00 1 – 64 2
73–20–00 2 – 47 2
73–20–00 4 – 58 1
73–20–00 5 – 58 2
MS9020–08 73–10–00 1 – 11 4
NUMERICAL INDEX
ALPHA
PAGE 26
DEC 15/01
TOTAL
MS9047–065 72–60–00 15 – 27 1
72–60–00 16 – 25 1
MS9047–068 72–60–00 5 – 2 1
72–60–00 6 – 2 1
MS9060–05 72–50–00 1 – 29 8
77–20–00 1 – 2 REF
MS9088–09 72–40–00 1 – 2 2
MS9134–01 72–05–00 1 – 28 2
72–05–00 3 – 25 2
MS9135–01 72–05–00 1 – 22 1
72–60–00 1 – 57 2
72–60–00 2 – 54 2
72–60–00 3 – 48 2
73–10–00 3 – 20 1
73–10–00 4 – 28 1
MS9165–13 75–10–00 1 – 18 ALT
MS9165–14 75–10–00 1 – 27 1
MS9169–33 72–60–00 10 – 13 8
MS9193–03 72–00–00 4 – 15 1
72–00–00 5 – 15 1
72–00–00 6 – 15 1
MS9193–04 73–20–00 1 – 10A 1
73–20–00 2 – 10A 1
73–20–00 4 – 10A 1
73–20–00 5 – 4A 1
MS9193–05 72–00–00 4 – 13 1
72–00–00 5 – 13 1
72–00–00 6 – 13 1
MS9195–04 HISTORICAL PARTS
MS9217–05 72–05–00 1 – 30 3
72–05–00 2 – 26 3
72–05–00 3 – 27 3
72–05–00 4 – 22 3
MS9217–07 75–10–00 1 – 6 2
75–10–00 2 – 6 2
75–10–00 3 – 6 2
75–10–00 4 – 6 2
MS9217–12 75–10–00 1 – 44 3
75–10–00 2 – 22 3
75–10–00 3 – 35 3
75–10–00 4 – 22 3
MS9276–10 72–60–00 5 – 21 3
72–60–00 6 – 19 3
MS9314–03 75–10–00 2 – 1 ALT
MS9314–04 72–00–00 1 – 18 ALT
72–00–00 2 – 18 ALT
72–00–00 3 – 18 ALT
MS9320–09 72–60–00 1 – 7 2
72–60–00 1 – 12 4
72–60–00 1 – 31 32
NUMERICAL INDEX
ALPHA
PAGE 27
DEC 15/01
TOTAL
MS9320–09 72–60–00 2 – 7 2
72–60–00 2 – 11 2
72–60–00 2 – 29 34
72–60–00 3 – 7 2
72–60–00 3 – 11 2
72–60–00 3 – 24 30
72–60–00 3 – 51 2
72–60–00 4 – 7 2
72–60–00 4 – 11 2
72–60–00 4 – 24 32
72–60–00 7 – 19 1
72–60–00 8 – 19 1
72–60–00 9 – 7 2
72–60–00 9 – 15 8
72–60–00 9 – 35 1
KITS 1 – 2 2
MS9320–10 72–05–00 1 – 27 14
72–05–00 2 – 24 14
72–05–00 3 – 24 14
72–05–00 4 – 19 8
72–60–00 1 – 33 17
72–60–00 2 – 31 17
72–60–00 3 – 26 17
72–60–00 4 – 26 17
72–60–00 6 – 34 6
72–60–00 8 – 36 6
73–10–00 1 – 18 3
73–10–00 2 – 9 3
73–10–00 3 – 23 3
73–10–00 4 – 31 3
73–10–00 5 – 36 3
73–20–00 1 – 45 3
73–20–00 1 – 67 3
73–20–00 2 – 38 3
73–20–00 2 – 50 3
73–20–00 3 – 17 2
73–20–00 4 – 47 3
73–20–00 4 – 61 3
73–20–00 5 – 43 3
73–20–00 5 – 61 3
MS9320–11 72–05–00 1 – 21 8
72–05–00 2 – 19 4
72–05–00 3 – 19 4
72–05–00 4 – 16 4
72–60–00 1 – 56 8
72–60–00 2 – 53 12
72–60–00 3 – 47 8
72–60–00 4 – 48 4
72–60–00 4 – 52 2
73–10–00 3 – 16 4
NUMERICAL INDEX
ALPHA
PAGE 28
DEC 15/01
TOTAL
MS9320–11 73–10–00 4 – 24 4
73–10–00 5 – 29 4
MS9321–09 72–60–00 10 – 14 8
MS9351–02 73–21–00 1 – 6 ALT
73–21–00 2 – 3 ALT
73–21–00 2 – 8 ALT
73–21–00 3 – 3 ALT
73–21–00 4 – 3 ALT
74–20–00 1 – 11 ALT
74–20–00 4 – 6 ALT
74–20–00 5 – 10 ALT
MS9351–06 73–21–00 1 – 19 ALT
73–21–00 4 – 7 ALT
MS9365–05 73–21–00 3 – 6 1
MS9372–017 75–10–00 4 – 13 ALT
HISTORICAL PARTS
MS9372–019 72–50–00 2 – 10 ALT
MS9372–021 75–10–00 1 – 8 ALT
75–10–00 2 – 8 ALT
75–10–00 3 – 8 ALT
75–10–00 4 – 8 ALT
MS9372–029 72–00–00 1 – 51 ALT
72–00–00 2 – 51 ALT
72–00–00 3 – 51 ALT
72–50–00 1 – 9 ALT
72–50–00 2 – 13 ALT
NUMERICAL INDEX
ALPHA
PAGE 29
DEC 15/01
TOTAL

MS9395–04 73–20–00 4 – 27 1
MS9432–05 72–50–00 3 – 3 18
72–50–00 4 – 8 18
MS9432–06 72–40–00 1 – 20 14
72–50–00 3 – 3 21
72–50–00 4 – 8 21
MS9432–07 72–40–00 1 – 22 24
MS9432–08 KITS 1 – 11 2
MS9432–10 KITS 1 – 11 ALT
MS9432–11 KITS 1 – 11 ALT
MS9486–01 72–60–00 11 – 6 1
72–60–00 12 – 6 1
72–60–00 13 – 23 3
72–60–00 13 – 25 2
72–60–00 13 – 29 4
72–60–00 14 – 19 3
72–60–00 14 – 21 2
72–60–00 14 – 25 4
72–60–00 15 – 28 7
72–60–00 16 – 26 7
MS9486–02 72–60–00 15 – 23 2
72–60–00 16 – 21 2
MS9486–03 72–60–00 11 – 4 1
72–60–00 11 – 18 1
72–60–00 12 – 4 1
72–60–00 12 – 19 1
72–60–00 15 – 10 1
72–60–00 16 – 8 1
MS9486–06 72–60–00 11 – 14 3
72–60–00 12 – 14 3
MS9486–25 72–60–00 15 – 25 12
72–60–00 16 – 23 12
MS9486–26 72–60–00 1 – 24 2
72–60–00 2 – 23 2
72–60–00 13 – 17 2
72–60–00 15 – 5 2
MS9486–49 72–60–00 13 – 27 1
72–60–00 13 – 31 1
72–60–00 14 – 23 1
72–60–00 15 – 32 1
MS9486–50 72–60–00 14 – 27 1
MS9489–04 72–00–00 1 – 15 4
72–00–00 1 – 24 2
72–00–00 1 – 33 2
72–00–00 2 – 15 4
NUMERICAL INDEX
ALPHA
PAGE 30
DEC 15/01
TOTAL
MS9489–04 72–00–00 2 – 24 2
72–00–00 2 – 33 2
72–00–00 3 – 15 4
72–00–00 3 – 24 2
72–00–00 3 – 33 2
MS9489–05 73–21–00 4 – 3 ALT
73–21–00 4 – 4 ALT
73–21–00 4 – 5 ALT
73–21–00 4 – 7 ALT
73–21–00 4 – 8 ALT
74–20–00 4 – 10 4
75–10–00 1 – 22 ALT
75–10–00 3 – 20 ALT
MS9489–06 72–00–00 1 – 15 4
72–00–00 2 – 15 2
72–00–00 3 – 15 4
72–30–00 2 – 5 1
73–20–00 2 – 11 ALT
73–20–00 4 – 11 ALT
74–10–00 1 – 2 3
74–10–00 2 – 2 3
74–20–00 4 – 4 5
MS9489–08 73–21–00 2 – 15 2
73–21–00 3 – 14 2
73–21–00 4 – 14 2
MS9489–10 72–40–00 1 – 4 2
MS9489–16 73–21–00 1 – 27 3
MS9489–20 73–21–00 1 – 27 3
KITS 1 – 1 3
KITS 1 – 2 3
KITS 1 – 3 3
MS9489–22 74–20–00 4 – 12 2
MS9489–27 72–60–00 7 – 17 1
72–60–00 8 – 17 1
MS9490–26 72–60–00 5 – 20 3
72–60–00 6 – 18 3
MS9501–20 73–10–00 3 – 18 3
73–10–00 4 – 26 3
73–10–00 5 – 31 3
MS9551–020 74–20–00 2 – 17 1
74–20–00 3 – 12 1
74–20–00 4 – 16 1
MS9551–021 74–20–00 2 – 17 ALT
74–20–00 3 – 12 ALT
74–20–00 4 – 16 ALT
MS9551–022 74–20–00 2 – 17 ALT
74–20–00 3 – 12 ALT
74–20–00 4 – 16 ALT
MS9552–020 74–20–00 2 – 17 ALT
74–20–00 3 – 12 ALT
NUMERICAL INDEX
ALPHA
PAGE 31
DEC 15/01
TOTAL
MS9552–020 74–20–00 4 – 16 ALT

MS9552–021 74–20–00 2 – 17 ALT
74–20–00 3 – 12 ALT
74–20–00 4 – 16 ALT
MS9552–022 74–20–00 2 – 17 ALT
74–20–00 3 – 13 ALT
74–20–00 4 – 16 ALT
MS9555–06 72–30–00 1 – 44 12
MS9555–07 72–40–00 1 – 7 12
MS9564–03 72–50–00 3 – 32 2
MS9565–06 72–50–00 2 – 9 3
72–50–00 2 – 12 3
MS9565–33 72–60–00 10 – 13 8
MS9566–06 72–00–00 1 – 49 3
72–00–00 2 – 49 3
72–00–00 3 – 49 3
MS9566–30 72–00–00 1 – 50 3
72–00–00 2 – 50 3
72–00–00 3 – 50 3
MS9584–04 73–10–00 1 – 14 3
MS9592–133 72–50–00 4 – 12 1
MS9592–137 74–20–00 2 – 18 1
74–20–00 3 – 13 1
74–20–00 4 – 17 1
MS9592–138 74–20–00 2 – 18 ALT
74–20–00 3 – 13 ALT
74–20–00 4 – 17 ALT
MS9593–015 72–60–00 1 – 49 1
72–60–00 3 – 42 1
72–60–00 4 – 42 1
MS9593–052 72–60–00 1 – 50 1
72–60–00 2 – 48 1
72–60–00 3 – 43 1
73–20–00 1 – 14 1
73–20–00 5 – 8 1
KITS 1 – 13 1
MS9593–074 72–60–00 1 – 51 1
72–60–00 2 – 47 1
72–60–00 4 – 43 1
KITS 1 – 12 1
MS9593–198 73–20–00 1 – 14 1
KITS 1 – 12 1
MS9594–132 73–21–00 3 – 4 1
MS9596–137 74–20–00 2 – 18 ALT
74–20–00 3 – 13 ALT
74–20–00 4 – 17 ALT
NUMERICAL INDEX
ALPHA
PAGE 32
DEC 15/01
TOTAL
MS9596–138 74–20–00 2 – 18 ALT

74–20–00 3 – 13 ALT
74–20–00 4 – 17 ALT
MS9597–074 73–20–00 1 – 9 ALT
75–10–00 1 – 27 ALT
75–10–00 3 – 24 ALT
MS9704–03 72–50–00 3 – 32 2
MS9705–14 72–50–00 3 – 29 10
MS9732–07 72–50–00 1 – 18 AR
MS9825–11 72–30–00 2 – 6 1
HISTORICAL PARTS
MS9825–29 73–10–00 1 – 5 1
73–10–00 2 – 5 1
73–10–00 3 – 5 1
M22759/4–20–9 73–21–00 5 – 25 AR
73–21–00 6 – 28 AR
73–21–00 7 – 25 AR
73–21–00 8 – 26 AR
M23053/6A 73–21–00 5 – 29 AR
73–21–00 6 – 34 AR
73–21–00 7 – 29 AR
73–21–00 8 – 30 AR
M27500–20RB2T14 73–21–00 6 – 25 AR
73–21–00 7 – 23 AR
73–21–00 8 – 24 AR
M3417–8N 73–21–00 6 – 31 1
M83248/1–012 72–60–00 1 – 20B AR
72–60–00 3 – 20 AR
72–60–00 4 – 19A AR
M83248/1–122 73–20–00 2 – 14B ALT
73–20–00 4 – 14B ALT
M83248/1–905 72–60–00 1 – 27 ALT
72–60–00 2 – 26 ALT
M83723–06R1006N 73–21–00 6 – 4 ALT
M83723–06R1210N 73–21–00 6 – 6 ALT
M83723–28–20 73–21–00 6 – 29 7
M83723–75R0803N 73–21–00 6 – 7 1
M83723–75R1415N 73–21–00 6 – 3 1
M83723/15A–12 72–60–00 1 – 13 1
72–60–00 4 – 12 1
M83723/15A10 72–60–00 2 – 12A 1
NUMERICAL INDEX
ALPHA
PAGE 33
DEC 15/01
TOTAL
M83723/15A12 72–60–00 3 – 12A 1

M83723/23R080IN 73–21–00 6 – 5 ALT
M83723/28–20 73–21–00 5 – 26 9
73–21–00 7 – 26 9
73–21–00 8 – 27 9
M83723/61–214R 73–21–00 2 – 12 1
73–21–00 3 – 11 1
73–21–00 4 – 11 1
M83723/61–28R 74–20–00 2 – 14 1
74–20–00 3 – 9 1
74–20–00 4 – 13 1
M83723/74R1212N 73–21–00 5 – 6 1
73–21–00 7 – 6 1
73–21–00 8 – 6 1
M83723/75R0803N 73–21–00 5 – 3 3
73–21–00 7 – 3 3
73–21–00 8 – 3 2
M83723/75R1415N 73–21–00 5 – 7 1
73–21–00 7 – 7 1
73–21–00 8 – 7 1
M83723/85K1624N 73–21–00 5 – 2 1
73–21–00 7 – 2 1
73–21–00 8 – 2 1
M85049/47–N08 73–21–00 6 – 11 2
M85049/51–1–8N 73–21–00 6 – 10 1
NAS1027–C3W 73–20–00 2 – 14 ALT
73–20–00 4 – 14 ALT
NAS1190E06P5L 73–21–00 1 – 37 1
NAS1394–3 72–60–00 15 – 22 9
72–60–00 16 – 20 9
NAS1394–3L 72–60–00 15 – 36 9
72–60–00 16 – 32 9
NAS1593–015 73–10–00 7 – 21 1
NAS1745–2 73–21–00 5 – 28 4
73–21–00 6 – 24 2
73–21–00 7 – 28 4
73–21–00 8 – 29 4
NAS1745–4 73–21–00 5 – 22 5
73–21–00 6 – 23 2
73–21–00 7 – 22 5
73–21–00 8 – 23 5
NAS1745–7 72–60–00 1 – 14 2
72–60–00 2 – 13 2
72–60–00 3 – 13 2
72–60–00 4 – 13 2
NAS509–7 74–20–00 1 – 8 1
74–20–00 2 – 9 1
74–20–00 3 – 5 1
74–20–00 4 – 7 1
74–20–00 5 – 6 1
NUMERICAL INDEX
ALPHA
PAGE 34
DEC 15/01
TOTAL
NAS617–5 72–00–00 4 – 26 1
72–00–00 5 – 26 1
72–00–00 6 – 26 1
NAS813–16Y 72–05–00 2 – 9 1
HISTORICAL PARTS
NAS813–8 72–05–00 3 – 35 1
NAS815–16A 72–05–00 1 – 9 1
NAS815–4A 72–05–00 1 – 3 ALT
72–05–00 2 – 3 ALT
72–05–00 2 – 41 ALT
72–05–00 3 – 3 ALT
72–05–00 4 – 3 ALT
NAS816–29 72–05–00 2 – 40 1
72–05–00 4 – 44 1
NAS820–14–14S 72–05–00 4 – 37 1
NAS820–14A 72–05–00 1 – 10 1
NAS820–14S 72–05–00 3 – 34 1
NAS820–16A 72–05–00 1 – 12B 2
RTV106 73–21–00 5 – 31 AR
73–21–00 6 – 35 AR
73–21–00 7 – 31 AR
73–21–00 8 – 32 AR
S100–32 73–20–00 7 – 13 2
75–10–00 6 – 12 2
S101AC111 73–20–00 7 – 12 1
75–10–00 6 – 11 1
S101AC9 73–20–00 7 – 15 1
75–10–00 6 – 14 2
S108A11 73–20–00 7 – 3 2
75–10–00 6 – 3 2
TTI–1795A HISTORICAL PARTS
V105–18 73–20–00 7 – 2 1
V105–22 75–10–00 6 – 2 1
V111–14 75–10–00 6 – 18 1
V113–3 73–20–00 7 – 7 1
75–10–00 6 – 7 1
V3920 75–10–00 6 – 15 1
V5002 75–10–00 6 – 9 1
V5002–02 73–20–00 7 – 9 2
V5003 73–20–00 7 – 8 1
V5004–12520 73–20–00 7 – 6 1
V5010–021 73–20–00 7 – 16 1
V5011–125 73–20–00 7 – 14 2
V5013–131 73–20–00 7 – 4 1
V5013–172 75–10–00 6 – 4 1
V5015–02 73–20–00 7 – 10 1
V5023–401 73–20–00 7 – 11 1
75–10–00 6 – 10 1
V5032–131 73–20–00 7 – 5 1
V5036–135 75–10–00 6 – 5 1
NUMERICAL INDEX
ALPHA
PAGE 35
DEC 15/01
TOTAL
V5611 75–10–00 6 – 13 2
V8503 75–10–00 6 – 8 1
V8515 75–10–00 6 – 6 1
NUMERICAL INDEX
ALPHA
PAGE 36
DEC 15/01
TOTAL
0–14660 72–05–00 3 – 44 1
00–062106 72–30–00 1 – 34 1
014660 72–05–00 4 – 35 1
025–0092–050 72–30–00 1 – 32 ALT
033614–02 73–10–00 7 – 2 1
035–0092–051 72–30–00 1 – 34 ALT
046–0086–050 72–30–00 1 – 35 1
047749–01 73–10–00 7 – 20 1
1–0016–039 72–30–00 1 – 33 ALT
1N5550 73–21–00 6 – 33 1
1004–147 73–20–00 1 – 20 1
73–20–00 2 – 14C 1
73–20–00 4 – 14C 1
73–20–00 5 – 17 1
1006–53 73–20–00 1 – 19 1
73–20–00 2 – 14B 1
73–20–00 4 – 14B 1
11–971 73–20–00 1 – 18 1
73–20–00 2 – 14A 1
73–20–00 4 – 14A 1
73–20–00 5 – 15 1
113310–01A1 73–10–00 2 – 7 ALT
113310–02A1 73–10–00 2 – 7 ALT
113320–01A1 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
113320–02A1 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
113320–03A1 73–10–00 1 – 16 ALT
73–10–00 2 – 7 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
12–093010 72–30–00 1 – 35 ALT
1735475–02 73–10–00 7 – 3 1
1735479–01 73–10–00 7 – 18 1
1735480–04 73–10–00 7 – 23 1
1735517 73–10–00 7 – 19 1
1736235–01 73–10–00 7 – 22 1
1736659 73–10–00 7 – 15 1
1736883 73–10–00 7 – 16 1
1736884 73–10–00 7 – 8 1
1736886 73–10–00 7 – 10 1
1736995–01 73–10–00 7 – 5 1
1737391 73–10–00 7 – 9 1
1737610 73–10–00 7 – 24 1
1737701 73–10–00 7 – 10 1
NUMERICAL INDEX
NUMERIC
PAGE 1
DEC 15/01
TOTAL
1737704 73–10–00 7 – 18 1
1739728 73–10–00 7 – 8A 1
193255 75–10–00 5 – 40 2
23001751 73–21–00 1 – 25 1
23001757 72–05–00 1 – 23 1
72–05–00 2 – 20 1
72–05–00 3 – 20 1
23001761 75–10–00 5 – 1 1
23001762 75–10–00 5 – 1 1
23001768 73–21–00 1 – 25 1
23001783 75–10–00 5 – 18 1
23001788 75–10–00 5 – 2 ALT
23001789 75–10–00 5 – 2 1
23001798 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
23001801 72–50–00 3 – 7 1
KITS 1 – 15 1
23001802 72–60–00 9 – 40 1
23001804 75–10–00 1 – 20 1
75–10–00 3 – 18 1
23001805 72–50–00 4 – 39 AR
23001807 72–50–00 4 – 38 AR
23001810 72–50–00 4 – 26 1
23001816 72–50–00 4 – 43 AR
23001817 72–50–00 4 – 38 AR
23001822 75–10–00 1 – 19 1
75–10–00 3 – 17 1
23001826 73–20–00 1 – 1 1
73–20–00 4 – 1 1
73–20–00 5 – 1 1
23001827 72–50–00 2 – 6 1
23001829 72–60–00 2 – 55 1
23001831 72–60–00 2 – 57 1
23001832 72–50–00 2 – 14 1
23001843 75–10–00 1 – 26 1
75–10–00 3 – 23 1
23001846 75–10–00 2 – 17 1
75–10–00 4 – 17 1
23001847 72–50–00 4 – 42 AR
23001849 72–50–00 3 – 9 1
23001908 72–50–00 3 – 14 1
23001909 72–50–00 3 – 6 1
23001915 HISTORICAL PARTS
23001928–0 72–60–00 13 – 9 5
72–60–00 14 – 7 5
23001928–1 72–60–00 13 – 9 AR
72–60–00 14 – 7 AR
23001928–2 72–60–00 13 – 9 AR
72–60–00 14 – 7 AR
NUMERICAL INDEX
NUMERIC
PAGE 2
DEC 15/01
TOTAL
23001928–3 72–60–00 13 – 9 AR
72–60–00 14 – 7 AR
23001928–4 72–60–00 13 – 9 AR
72–60–00 14 – 7 AR
23001928–5 72–60–00 13 – 9 AR
72–60–00 14 – 7 AR
23001929–1 72–60–00 13 – 10 1
72–60–00 14 – 8 1
23001929–2 72–60–00 13 – –10 AR
72–60–00 14 – 8 AR
23001929–3 72–60–00 13 – 10 AR
72–60–00 14 – 8 AR
23001929–4 72–60–00 13 – 10 AR
72–60–00 14 – 8 AR
23001929–5 72–60–00 13 – 10 AR
72–60–00 14 – 8 AR
23001930 72–60–00 13 – 1 1
23001955 72–60–00 9 – 1 1
23001959 72–00–00 1 – 12 1
72–00–00 2 – 12 1
72–00–00 3 – 12 1
23001969 72–50–00 4 – 37 1
23001970 72–60–00 1 – 5 1
72–60–00 2 – 5 1
72–60–00 3 – 5 1
23001978 72–05–00 1 – 31 1
72–05–00 2 – 27 1
72–05–00 3 – 28 1
75–10–00 1 – 45 1
75–10–00 2 – 23 1
23001986 73–20–00 2 – 6 1
73–20–00 4 – 6 1
23001987 73–20–00 1 – 11 1
KITS 1 – 13 1
23001996 72–50–00 3 – 1 1
23001997 72–50–00 4 – 37 1
23003101 75–10–00 5 – 17 1
23003102–01 75–10–00 5 – 21A AR
23003102–02 75–10–00 5 – 21A AR
23003102–03 75–10–00 5 – 21A AR
23003102–04 75–10–00 5 – 21A AR
23003102–05 75–10–00 5 – 21A AR
23003102–06 75–10–00 5 – 21A AR
23003102–07 75–10–00 5 – 21A AR
23003102–08 75–10–00 5 – 21A AR
23003102–09 75–10–00 5 – 21A AR
23003102–10 75–10–00 5 – 21A AR
NUMERICAL INDEX
NUMERIC
PAGE 3
DEC 15/01
TOTAL
23003102–11 75–10–00 5 – 21A AR

23003102–12 75–10–00 5 – 21A AR
23003102–13 75–10–00 5 – 21A AR
23003102–14 75–10–00 5 – 21A AR
23003102–15 75–10–00 5 – 21A AR
23003102–16 75–10–00 5 – 21A AR
23003102–17 75–10–00 5 – 21A AR
23003102–18 75–10–00 5 – 21A AR
23003102–19 75–10–00 5 – 21A AR
23003102–20 75–10–00 5 – 21A AR
23003102–21 75–10–00 5 – 21A AR
23003102–22 75–10–00 5 – 21A AR
23003102–23 75–10–00 5 – 21A AR
23003102–24 75–10–00 5 – 21A AR
23003102–25 75–10–00 5 – 21A AR
23003102–26 75–10–00 5 – 21A AR
23003102–27 75–10–00 5 – 21A AR
23003102–28 75–10–00 5 – 21A AR
23003102–29 75–10–00 5 – 21A AR
23003102–30 75–10–00 5 – 21A AR
23003102–31 75–10–00 5 – 21A AR
23003102–32 75–10–00 5 – 21A AR
23003102–33 75–10–00 5 – 21A AR
23003102–34 75–10–00 5 – 21A AR
23003102–35 75–10–00 5 – 21A AR
23003102–36 75–10–00 5 – 21A AR
23003102–37 75–10–00 5 – 21A AR
23003102–38 75–10–00 5 – 21A AR
23003102–39 75–10–00 5 – 21A AR
23003102–40 75–10–00 5 – 21A AR
23003102–41 75–10–00 5 – 21A AR
23003102–42 75–10–00 5 – 21A AR
23003102–43 75–10–00 5 – 21A AR
23003102–44 75–10–00 5 – 21A AR
23003102–45 75–10–00 5 – 21A AR
23003102–46 75–10–00 5 – 21A AR
23003102–47 75–10–00 5 – 21A AR
23003102–48 75–10–00 5 – 21A AR
23003102–49 75–10–00 5 – 21A AR
23003102–50 75–10–00 5 – 21A AR
23003102–51 75–10–00 5 – 21A AR
23003102–52 75–10–00 5 – 21A AR
23003102–53 75–10–00 5 – 21A AR
23003102–54 75–10–00 5 – 21A AR
23003102–55 75–10–00 5 – 21A AR
23003106 75–10–00 5 – 1 1
23003108 72–40–00 1 – 28 1
23003109 72–40–00 1 – 29 1
23003110 72–40–00 1 – 30 1
23003111 72–40–00 1 – 31 6
NUMERICAL INDEX
NUMERIC
PAGE 4
DEC 15/01
TOTAL
23003113 75–10–00 5 – 8 1
75–10–00 5 – 31 1
23003136 75–10–00 5 – 1 1
23003138 73–20–00 1 – 43 ALT
23003139 73–20–00 1 – 43 ALT
23003140 73–20–00 1 – 43 ALT
23003143 73–10–00 7 – 1 1
23003144 75–10–00 5 – 43 1
23003145 75–10–00 1 – 40 1
23003439–6 72–05–00 1 – 47 1
23004203 72–50–00 4 – 9 AR
23004205 72–50–00 4 – 10 AR
23004206 72–50–00 4 – 40 AR
23004208 72–50–00 4 – 41 AR
23004210 72–30–00 1 – 41 1
23004212 72–30–00 2 – 1 ALT
72–50–00 1 – 2 AR
23004213 72–50–00 3 – 11A AR
23004214 72–50–00 3 – 11B AR
72–50–00 4 – 27 AR
HISTORICAL PARTS
23004216 72–50–00 4 – 28 1
23004219 72–60–00 5 – 39 2
23004220 72–60–00 13 – 1 1
23004221–1 72–60–00 13 – 21 1
23004221–2 72–60–00 13 – 21 AR
23004221–3 72–60–00 13 – 21 AR
23004224 73–20–00 2 – 13 1
73–20–00 4 – 13 1
23004230 72–60–00 9 – 47 1
72–60–00 10 – 20 1
72–60–00 10 – 27 1
23004236 72–50–00 3 – 3A 1
23004240 72–50–00 3 – 1 1
23004241 72–50–00 3 – 3C 2
23004248 72–50–00 3 – 3B 1
23004351 73–21–00 6 – 32 6
73–21–00 7 – 15 10
23004465 75–10–00 5 – 1 1
23004509 72–50–00 3 – 1 1
23004512 72–50–00 3 – 1 1
23004513 72–30–00 1 – 31 ALT
23004514 72–30–00 1 – 29 ALT
23004528 72–40–00 1 – 32 AR
23004531 72–00–00 5 – 1 1
23004532 72–00–00 2 – 2 1
23004533 72–05–00 2 – 1 1
23004534 72–30–00 1 – 23 1
NUMERICAL INDEX
NUMERIC
PAGE 5
DEC 15/01
TOTAL

23004536 72–50–00 3 – 1 1
23004537 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
23004538 72–30–00 1 – 25 1
23004540 72–50–00 1 – 1 1
23004544 KITS 1 – 13 1
23004545 72–00–00 2 – 1 1
23004547 73–21–00 2 – 1 1
HISTORICAL PARTS
23004560 72–40–00 1 – 34 AR
23004562 72–40–00 1 – 35 AR
23004563 72–30–00 1 – 43 2
23004567 72–50–00 4 – 11 1
23004821 73–21–00 1 – 25 1
23004826 75–10–00 5 – 44 1
23004836 73–20–00 1 – 65 1
73–20–00 2 – 48 1
73–20–00 5 – 59 1
23004837 73–20–00 4 – 59 1
23004963 73–21–00 6 – 1 1
23005203 75–10–00 1 – 40 1
75–10–00 2 – 18 1
75–10–00 3 – 37 1
75–10–00 4 – 18 1
23005204 73–20–00 1 – 21 1
73–20–00 2 – 15 1
73–20–00 4 – 15 1
73–20–00 5 – 18 1
23005208 75–10–00 1 – 40 ALT
23005210 72–50–00 3 – 3A 1
23005217 72–30–00 1 – 18 1
23005218 72–50–00 4 – 42 AR
23005219 72–00–00 3 – 1 1
23005222 72–00–00 6 – 1 1
23005223 73–21–00 3 – 1 1
23005225 73–21–00 7 – 1 1
23005228 73–20–00 4 – 59 1
23005229 73–10–00 3 – 19 1
73–10–00 4 – 27 1
73–10–00 5 – 32 1
23005230 72–00–00 3 – 2 1
23005231 72–05–00 3 – 1 1
23005232 72–50–00 3 – 1 1
23005233 72–50–00 3 – 1 1
23005247 72–05–00 1 – 31 1
72–05–00 2 – 27 1
NUMERICAL INDEX
NUMERIC
PAGE 6
DEC 15/01
TOTAL
23005247 72–05–00 3 – 28 1
75–10–00 1 – 45 1
75–10–00 2 – 23 1
75–10–00 3 – 36 1
23005249 72–30–00 1 – 41 AR
23005250 72–30–00 1 – 1 1
23005253 72–00–00 1 – 2 1
23005257 72–30–00 1 – 41 AR
23005263 72–50–00 3 – 14 1
23005267 72–30–00 2 – 31 1
23005268 73–10–00 3 – 6 1
23005269 73–10–00 3 – 7 1
23005270 72–30–00 2 – 30 1
23005271 72–30–00 2 – 24 1
KITS 1 – 6 1
KITS 1 – 7 1
23005271–1 72–30–00 2 – 24 1
23005271–2 72–30–00 2 – 24 AR
23005271–3 72–30–00 2 – 24 AR
23005272 72–50–00 4 – 17 1
23005273 72–60–00 5 – 36 1
72–60–00 6 – 41 1
KITS 1 – 6 1
KITS 1 – 8 1
23005274 72–30–00 2 – 32 1
KITS 1 – 6 1
KITS 1 – 7 1
23005276 72–30–00 2 – 28 1
23005277 72–60–00 5 – 32 1
23005279 72–30–00 2 – 22 1
23005287 72–60–00 1 – 20A 2
72–60–00 3 – 19 2
72–60–00 4 – 19 2
23005290 72–00–00 1 – 1 1
23005291–1 72–60–00 13 – 19 1
72–60–00 14 – 15 1
72–60–00 15 – 7 1
72–60–00 16 – 5 1
23005291–2 72–60–00 13 – 19 AR
72–60–00 14 – 15 AR
72–60–00 15 – 7 AR
72–60–00 16 – 5 AR
23005291–3 72–60–00 13 – 19 AR
72–60–00 14 – 15 AR
72–60–00 15 – 7 AR
72–60–00 16 – 5 AR
23005296 72–60–00 13 – 1 1
23005297 72–60–00 15 – 1 1
23005366 75–10–00 5 – 1 1
23005368 75–10–00 5 – 3 1
NUMERICAL INDEX
NUMERIC
PAGE 7
DEC 15/01
TOTAL
23005369 75–10–00 5 – 3 ALT

23005370 75–10–00 5 – 2 1
23005371 75–10–00 5 – 2 1
23005396 72–05–00 3 – 30 1
23005456 75–10–00 5 – 1 1
23005462 72–50–00 4 – 11 1
23005471 73–21–00 1 – 25 AR
23005479 73–21–00 1 – 25 1
23005655 72–60–00 2 – 1 1
23005656 72–60–00 3 – 1 1
23005667 73–20–00 2 – 5 1
23005672 72–50–00 1 – 13 1
23005741 72–50–00 1 – 25 1
23005742 72–50–00 1 – 26 2
23005743 72–00–00 1 – 44 1
72–00–00 2 – 44 1
72–00–00 3 – 44 1
23005746 72–60–00 1 – 36 ALT
72–60–00 1 – 44 ALT
72–60–00 2 – 34 ALT
72–60–00 2 – 42 ALT
72–60–00 3 – 29 ALT
72–60–00 3 – 37 ALT
72–60–00 4 – 37 ALT
23005747 72–60–00 1 – 39 1
72–60–00 1 – 41 2
72–60–00 2 – 37 1
72–60–00 2 – 39 2
72–60–00 3 – 32 1
72–60–00 3 – 34 2
72–60–00 4 – 32 ALT
72–60–00 4 – 34 ALT
23006267 74–20–00 1 – 19 AR
74–20–00 2 – 26 AR
74–20–00 3 – 21 AR
74–20–00 4 – 25 AR
74–20–00 5 – 18 AR
23006268 73–20–00 1 – 65 1
73–20–00 2 – 48 1
23006269 73–20–00 4 – 59 1
23006582 KITS 1 – 6 AR
23006590–01 72–30–00 1 – 42 6
72–30–00 1 – 45 12
72–40–00 1 – 23 12
23007007 72–40–00 1 – 36 AR
23007151 72–60–00 1 – 35 1
NUMERICAL INDEX
NUMERIC
PAGE 8
DEC 15/01
TOTAL
23007151 72–60–00 1 – 46 2
72–60–00 2 – 33 1
72–60–00 2 – 44 2
72–60–00 3 – 28 1
72–60–00 3 – 39 2
72–60–00 4 – 28 1
72–60–00 4 – 39 2
72–60–00 5 – 4 1
72–60–00 5 – 12 1
72–60–00 6 – 4 1
72–60–00 6 – 12 1
23007152 72–50–00 4 – 31 1
23007157 72–60–00 5 – 9 1
72–60–00 6 – 9 1
23007162–1 72–50–00 4 – 11 AR
23007162–2 72–50–00 4 – 11 AR
23007164 72–60–00 1 – 52 1
72–60–00 4 – 44 1
KITS 1 – 12 1
23007167 72–05–00 1 – 31 1
72–05–00 2 – 27 1
72–05–00 3 – 28 1
72–05–00 4 – 23 1
75–10–00 1 – 45 1
75–10–00 2 – 23 1
75–10–00 3 – 36 1
75–10–00 4 – 23 1
KITS 1 – 16 1
23007190 72–30–00 2 – 15 1
23007196 72–30–00 2 – 11 1
23007202 72–50–00 3 – 24 ALT
72–50–00 4 – 20 ALT
72–60–00 5 – 34 1
72–60–00 6 – 39 1
KITS 1 – 6 1
KITS 1 – 8 1
23007210 72–30–00 2 – 13 1
23007213 72–50–00 4 – 37 1
23007217 72–30–00 2 – 8 1
23007220 72–50–00 4 – 44 1
23007221 72–50–00 4 – 28 1
23007243 72–60–00 9 – 33 1
23007246 72–60–00 1 – 37 1
72–60–00 2 – 35 1
72–60–00 3 – 30 1
72–60–00 4 – 30 1
23007247 72–60–00 1 – 40 1
72–60–00 2 – 38 1
72–60–00 3 – 33 1
NUMERICAL INDEX
NUMERIC
PAGE 9
DEC 15/01
TOTAL
23007247 72–60–00 4 – 33 1
23007248 72–60–00 5 – 5 1
72–60–00 6 – 5 1
23007501 73–20–00 1 – 43 1
73–20–00 4 – 45 1
23007502 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
23007508 73–20–00 1 – 43 ALT
23007531 72–40–00 1 – 33 AR
23007804 73–20–00 1 – 43 ALT
23007805 73–20–00 1 – 43 ALT
23007806 73–20–00 1 – 43 ALT
23007826 73–20–00 7 – 1 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
KITS 1 – 9 1
23007827 75–10–00 6 – 1 1
23007850 73–20–00 1 – 43 1
73–20–00 4 – 45 1
23007851 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
23007862 73–20–00 1 – 65 1
73–20–00 2 – 48 1
23007863 73–20–00 4 – 59 1
23007874 73–20–00 1 – 65 1
73–20–00 2 – 48 1
23007875 73–20–00 4 – 59 1
23007896 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23007897 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
23007979 72–60–00 1 – 9 1
72–60–00 3 – 49 1
72–60–00 4 – 50 1
23007980 72–60–00 2 – 9 1
KITS 1 – 2 1
23007981 72–60–00 1 – 10 1
72–60–00 3 – 9 1
72–60–00 4 – 9 1
23007994 72–50–00 3 – 3D AR
23008000 72–50–00 3 – 1 1
23008001 72–30–00 2 – 1 ALT
72–50–00 1 – 2 AR
23008002 72–30–00 2 – 1 ALT
72–50–00 1 – 2 AR
NUMERICAL INDEX
NUMERIC
PAGE 10
DEC 15/01
TOTAL

23008008–1 72–60–00 15 – 41 1
72–60–00 16 – 37 1
23008008–2 72–60–00 15 – 41 AR
72–60–00 16 – 37 AR
23008008–3 72–60–00 15 – 41 AR
72–60–00 16 – 37 AR
23008014 72–30–00 1 – 36 AR
23008017 72–60–00 7 – 21 1
72–60–00 8 – 20 1
23008018 72–60–00 7 – 26 1
72–60–00 8 – 25 1
23008022 72–60–00 15 – 1 1
23008029 72–30–00 2 – 30 1
23008030 72–50–00 4 – 30 1
KITS 1 – 15 1
23008036 75–10–00 2 – 1 1
23008037 72–50–00 3 – 3E AR
23008038 72–50–00 3 – 3F AR
23008039 72–50–00 3 – 3G AR
23008055 72–50–00 3 – 3H AR
23008056 72–50–00 3 – 3J AR
23008057 72–50–00 3 – 3K AR
23008060 72–50–00 3 – 1 1
23008061 72–50–00 3 – 1 1
23008062 72–50–00 3 – 1 1
23008063 72–50–00 3 – 1 1
23008064 72–50–00 4 – 37 1
23008070 72–30–00 2 – 28 1
23008080 72–50–00 2 – 15 1
23008089 72–30–00 2 – 30 1
23008090 72–30–00 2 – 28 1
23008254 KITS 1 – 7 AR
23008255 KITS 1 – 8 AR
23008453 72–60–00 9 – 45 3
23008454–0 72–60–00 11 – 23 2
23008454–1 72–60–00 12 – 24 2
72–60–00 13 – 2 3
72–60–00 14 – 2 3
72–60–00 15 – 2 1
72–60–00 16 – 2 1
23008454–2 72–60–00 11 – 23 AR
72–60–00 12 – 24 AR
72–60–00 13 – 2 AR
72–60–00 14 – 2 AR
72–60–00 15 – 2 AR
72–60–00 16 – 2 AR
23008454–3 72–60–00 11 – 23 AR
NUMERICAL INDEX
NUMERIC
PAGE 11
DEC 15/01
TOTAL
23008454–3 72–60–00 12 – 24 AR
72–60–00 13 – 2 AR
72–60–00 14 – 2 AR
72–60–00 15 – 2 AR
72–60–00 16 – 2 AR
23008456 72–60–00 13 – 1 1
23008457 72–60–00 11 – 1 1
23008458 72–60–00 11 – 22 1
23008466 72–50–00 3 – 1 1
23008467 72–50–00 3 – 1 1
23008468 72–50–00 3 – 1 1
23008469 72–60–00 1 – 38 1
72–60–00 1 – 43 1
72–60–00 2 – 36 1
72–60–00 2 – 41 1
72–60–00 3 – 31 1
72–60–00 3 – 36 1
72–60–00 4 – 31 1
72–60–00 4 – 36 1
72–60–00 5 – 3 1
72–60–00 6 – 3 1
72–60–00 7 – 25 1
72–60–00 8 – 24 1
23008470 72–50–00 3 – 11 1
23008490 72–50–00 1 – 1 1
HISTORICAL PARTS
23008495–1 72–00–00 1 – 17 1
72–00–00 2 – 17 1
72–00–00 3 – 17 1
23008495–10 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–11 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–2 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–3 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–4 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–5 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–6 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
NUMERICAL INDEX
NUMERIC
PAGE 12
DEC 15/01
TOTAL
23008495–7 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–8 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008495–9 72–00–00 1 – 17 AR
72–00–00 2 – 17 AR
72–00–00 3 – 17 AR
23008518 72–50–00 4 – 37 1
23008553 72–30–00 1 – 41 1
23008555 72–50–00 3 – 16 1
23008562 72–00–00 1 – 2 1
23008566 72–30–00 1 – 41 1
23008568 72–50–00 3 – 1 1
23008585 72–00–00 4 – 1 1
23008586 72–60–00 1 – 1 1
23008648 72–50–00 3 – 3L AR
23008649 72–50–00 4 – 27 5
23009170 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23009171 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23009172 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23009300 72–00–00 1 – 1 1
23009312 72–00–00 1 – 16 2
72–00–00 2 – 16 2
72–00–00 3 – 16 2
KITS 1 – 16 2
KITS 1 – 17 2
23009568 72–30–00 1 – 43 2
23009569 72–40–00 1 – 18 1
23009573 72–50–00 2 – 30 2
KITS 1 – 15 2
23009586 72–30–00 1 – 35 AR
23009590 72–30–00 1 – 35 AR
23009591 72–30–00 1 – 19 1
23009594 72–00–00 1 – 37 1
72–00–00 2 – 37 1
72–00–00 3 – 37 1
23009626 72–30–00 1 – 36 AR
NUMERICAL INDEX
NUMERIC
PAGE 13
DEC 15/01
TOTAL
23009632 72–50–00 3 – 30 AR
23009648 72–30–00 2 – 7 1
23009656 72–50–00 3 – 18 1
23009663 72–30–00 1 – 2A 1
HISTORICAL PARTS
23009670 72–30–00 2 – 16 1
23009677 72–60–00 9 – 9 ALT
23009813 72–50–00 1 – 17 AR
23009851 72–50–00 1 – 35 1
77–20–00 1 – 8 REF
23009886 72–50–00 4 – 28 AR
23009891 72–05–00 1 – 40 2
72–05–00 2 – 33 2
72–05–00 3 – 40 2
72–05–00 4 – 32 2
230124659 72–60–00 14 – 29 1
230124660 72–60–00 14 – 30 2
23030341 72–50–00 4 – 42 AR
23030601 75–10–00 5 – 41 1
23030617 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
23030637 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
73–20–00 4 – 45 ALT
23030638 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
23030639 73–20–00 1 – 43 1
73–20–00 4 – 45 1
23030642 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23030799–10 72–05–00 2 – 39 1
72–05–00 4 – 43 1
23030799–16 72–05–00 1 – 9 1
72–05–00 3 – 9 1
72–05–00 4 – 9 1
23030880 72–60–00 9 – 9 ALT
23030910 72–40–00 1 – 18 1
23030911 72–40–00 1 – 18 1
23030917 72–60–00 5 – 39 2
72–60–00 6 – 44 2
23030956 72–50–00 3 – 14 1
23030961 72–50–00 3 – 6 1
23030974 72–50–00 3 – 22 1
23030976 72–30–00 2 – 26 1
23030978–1 72–50–00 4 – 11 AR
23030978–2 72–50–00 4 – 11 AR
NUMERICAL INDEX
NUMERIC
PAGE 14
DEC 15/01
TOTAL
23030982 72–50–00 3 – 9 1
KITS 1 – 15 1
23030986 72–60–00 12 – 12 1
23030987 72–60–00 12 – 2 1
23030988 72–60–00 12 – 17 1
23030989 72–60–00 12 – 8 1
23030990 72–60–00 12 – 10 1
23030991 72–60–00 12 – 13 1
23030993 72–60–00 10 – 11 1
23030994 72–60–00 10 – 24 1
23030998 72–60–00 9 – 33 1
23031219 72–60–00 5 – 39 2
72–60–00 6 – 44 2
23031268–1 72–60–00 13 – 21 1
72–60–00 14 – 17 1
23031268–2 72–60–00 13 – 21 AR
72–60–00 14 – 17 AR
23031268–3 72–60–00 13 – 21 AR
72–60–00 14 – 17 AR
23031284 72–50–00 4 – 46 1
23031291 72–50–00 4 – 39 AR
23031296 72–60–00 15 – 1 1
23031403 72–60–00 15 – 1 1
23031404 72–60–00 15 – 1 1
23031405 72–60–00 13 – 1 1
23031415 72–50–00 2 – 33 AR
23031426 72–50–00 3 – 11 ALT
23031438 72–50–00 1 – 13 AR
23031454 72–50–00 4 – 50 AR
23031458 72–60–00 5 – 39 ALT
72–60–00 6 – 44 ALT
23031459 72–60–00 12 – 1 1
23031461 72–60–00 12 – 23 1
23031464 72–50–00 1 – 13 AR
23031478 72–50–00 4 – 31 1
72–50–00 4 – 33 1
23031488 72–50–00 3 – 36 1
23031489 72–50–00 3 – 31 1
23031491 72–50–00 4 – 47 1
23031491–1 72–50–00 4 – 47 AR
23031491–2 72–50–00 4 – 47 AR
23031491–3 72–50–00 4 – 47 AR
23031491–4 72–50–00 4 – 47 AR
23031491–5 72–50–00 4 – 47 AR
23031492 72–50–00 4 – 46 1
23031493 72–50–00 1 – 1 1
23031494 72–50–00 4 – 36 1
NUMERICAL INDEX
NUMERIC
PAGE 15
DEC 15/01
TOTAL
23031507 73–21–00 1 – 31 6
KITS 1 – 1 6
KITS 1 – 2 6
KITS 1 – 3 6
23031532 73–21–00 1 – 25 1
23031856 72–00–00 4 – 24 1
72–00–00 5 – 24 1
72–00–00 6 – 24 1
23031909 72–50–00 4 – 49 1
23031913 72–50–00 4 – 22 1
23031925 72–50–00 1 – 1 1
23031934 72–50–00 4 – 26 1
23032263 72–50–00 4 – 49 ALT
23032264 72–50–00 3 – 11 ALT
23032277 72–00–00 1 – 39 AR
72–00–00 2 – 39 AR
72–00–00 3 – 39 AR
23032280 72–50–00 4 – 29 1
KITS 1 – 15 1
23032325 72–50–00 3 – 1 1
23032326 72–00–00 1 – 37 1
72–00–00 2 – 37 1
72–00–00 3 – 37 1
23032327 72–50–00 3 – 19 1
23032328 72–50–00 3 – 20 1
23032329 72–60–00 1 – 5 1
72–60–00 2 – 5 1
72–60–00 3 – 5 1
HISTORICAL PARTS
23032332 72–50–00 4 – 25 1
23032334 72–50–00 4 – 25 1
23032335 72–50–00 4 – 25 1
23032340 72–50–00 4 – 50 AR
23032345 72–50–00 2 – 15 1
23032941 72–50–00 3 – 3M 1
23032942 72–00–00 1 – 40 1
72–00–00 2 – 40 1
72–00–00 3 – 40 1
23032943 72–50–00 3 – 3N 1
NUMERICAL INDEX
NUMERIC
PAGE 16
DEC 15/01
TOTAL
23032944 72–00–00 1 – 13 1
72–00–00 2 – 13 1
72–00–00 3 – 13 1
23032947 72–50–00 3 – 3P 1
23033110 72–50–00 3 – 1 1
23033111 72–50–00 3 – 1 1
23033112 72–50–00 3 – 1 1
23033126 72–30–00 1 – 37 1
72–30–00 1 – 40 AR
23033156 72–00–00 1 – 20 1
72–00–00 2 – 20 1
72–00–00 3 – 20 1
23033157 72–50–00 1 – 13 1
HISTORICAL PARTS
23033178 72–60–00 3 – 1 1
HISTORICAL PARTS
23033188 72–50–00 4 – 45 AR
23033193 72–30–00 1 – 1 1
23033195 72–50–00 1 – 1 1
23033399 72–50–00 3 – 3 ALT
72–50–00 4 – 8 ALT
23033399–01 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
23033399–02 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
23033399–03 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
23033399–04 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
23033400 73–20–00 1 – 16 1
73–20–00 2 – 10 1
73–20–00 4 – 10 1
73–20–00 5 – 13 1
KITS 1 – 13 1
23033403 72–50–00 3 – 15 1
23033412 72–50–00 4 – 1 1
23033422 73–20–00 1 – 16 ALT
73–20–00 2 – 10 ALT
73–20–00 4 – 10 ALT
73–20–00 5 – 13 ALT
KITS 1 – 13 ALT
23033434 72–60–00 13 – 1 1
23033435 72–60–00 13 – 1 1
23033437 72–60–00 13 – 1 1
23033438 72–60–00 13 – 1 1
23033846 73–20–00 1 – 43 ALT
23033847 73–20–00 1 – 43 ALT
NUMERICAL INDEX
NUMERIC
PAGE 17
DEC 15/01
TOTAL
23033847 73–20–00 2 – 36 ALT

23033848 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 2 – 36 AR
23033849 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23033862 72–50–00 4 – 35 1
23033876 72–60–00 9 – 40 1
23033885 73–20–00 1 – 11 1
73–20–00 5 – 9 1
KITS 1 – 12 1
23033899 72–00–00 4 – 1 1
23034045 73–20–00 1 – 43 AR
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23034046 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23034047 73–20–00 1 – 43 AR
23034048 73–20–00 1 – 43 AR
23034049 73–20–00 1 – 43 AR
73–20–00 2 – 36 ALT
23034142 72–50–00 4 – 25 ALT
2303418–10N 72–60–00 2 – 12A ALT
2303418–12N 72–60–00 3 – 12A ALT
72–60–00 4 – 12 ALT
23034601 72–60–00 1 – 5 1
72–60–00 2 – 5 1
72–60–00 3 – 5 1
23034608 72–50–00 4 – 17 1
23034700 73–20–00 1 – 43 1
73–20–00 2 – 36 ALT
23034711 73–20–00 1 – 20 AR
73–20–00 2 – 14C AR
73–20–00 4 – 14C AR
73–20–00 5 – 17 AR
23034760 72–50–00 4 – 1 1
23034766 72–50–00 4 – 46 1
23034767 72–50–00 4 – 46 1
23034773 72–50–00 4 – 46 1
23034775 72–50–00 4 – 46 1
23034927 72–50–00 1 – 28 1
77–20–00 1 – 1 REF
23035105 72–60–00 9 – 25 1
23035106–1 72–60–00 9 – 28A 3
23035106–2 72–60–00 9 – 28A AR
23035106–3 72–60–00 9 – 28A AR
23035121 72–50–00 3 – 1 1
NUMERICAL INDEX
NUMERIC
PAGE 18
DEC 15/01
TOTAL
23035121 72–50–00 3 – 1 1
23035122 72–50–00 3 – 1 1
23035123 72–50–00 3 – 1 1
23035124 72–50–00 3 – 1 1
23035128 72–50–00 1 – 1 1
23035139 72–60–00 15 – 1 1
23035140 72–60–00 15 – 1 1
HISTORICAL PARTS
23035174 72–60–00 1 – 5 1
72–60–00 2 – 5 1
72–60–00 3 – 5 1
72–60–00 4 – 5 1
23035178 72–60–00 2 – 1 1
23035179 72–60–00 1 – 1 1
HISTORICAL PARTS
23035181 72–60–00 3 – 1 1
23035214 72–50–00 4 – 46 1
23035262 72–30–00 1 – 27 1
23035272 72–60–00 5 – 32 1
72–60–00 6 – 37 1
23035275 72–50–00 2 – 8 1
23035293 72–50–00 4 – 46 1
23036570 73–21–00 2 – 11 1
73–21–00 3 – 10 1
73–21–00 4 – 10 1
23036824 73–21–00 4 – 1 1
23036825–2 73–21–00 2 – 10 1
23037401 73–21–00 5 – 24 AR
73–21–00 6 – 27 AR
73–21–00 7 – 24A AR
23037429 72–50–00 3 – 36 1
23037446 72–50–00 3 – 13 1
23037449 72–50–00 4 – 17 1
23037765 73–10–00 7 – 3 AR
23038136 72–50–00 3 – 6 1
23038137 72–50–00 3 – 14 1
23038162 72–30–00 1 – 41 AR
23038185 72–40–00 1 – 11 AR
23038195 72–40–00 1 – 12 AR
23038213 72–50–00 4 – 1 1
23038235 72–50–00 2 – 7 1
23038238 72–60–00 9 – 41 1
23038239 72–60–00 9 – 37 1
23038956 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23038957 73–20–00 1 – 43 AR
NUMERICAL INDEX
NUMERIC
PAGE 19
DEC 15/01
TOTAL
23038957 73–20–00 2 – 36 1
73–20–00 4 – 45 1
23039030–02 73–21–00 1 – 10 1
73–21–00 1 – 22 1
73–21–00 2 – 5 1
73–21–00 2 – 6 1
73–21–00 3 – 7 1
73–21–00 3 – 8 2
73–21–00 4 – 6 1
73–21–00 4 – 8 1
23039030–03 72–40–00 1 – 21 1
73–20–00 1 – 15 2
73–20–00 3 – 5 1
73–20–00 4 – 26 2
73–20–00 5 – 7 1
73–20–00 5 – 12 1
73–20–00 5 – 39 2
73–20–00 6 – 5 1
73–21–00 1 – 9 1
73–21–00 3 – 6 1
73–21–00 4 – 4 1
74–20–00 1 – 6 2
74–20–00 5 – 5 2
KITS 1 – 2 2
KITS 1 – 4 1
KITS 1 – 12 2
23039030–04 73–21–00 1 – 11 1
73–21–00 2 – 4 1
73–21–00 2 – 6 1
73–21–00 3 – 7 1
73–21–00 4 – 6 1
74–20–00 1 – 5 10
74–20–00 2 – 4 5
74–20–00 2 – 8 1
74–20–00 2 – 34 1
74–20–00 3 – 4 4
74–20–00 4 – 5 10
74–20–00 5 – 4 3
74–20–00 5 – 21 1
KITS 1 – 2 1
KITS 1 – 13 1
23039030–05 KITS 1 – 9 1
23039030–07 73–10–00 3 – 8 2
73–10–00 4 – 16 2
73–10–00 5 – 21 2
73–21–00 1 – 11 1
73–21–00 1 – 15 1
73–21–00 3 – 4 1
73–21–00 3 – 5 1
73–21–00 3 – 7 1
NUMERICAL INDEX
NUMERIC
PAGE 20
DEC 15/01
TOTAL
23039030–07 73–21–00 4 – 5 1
73–21–00 4 – 6 1
23039030–08 73–20–00 3 – 6 1
73–20–00 5 – 22 1
73–20–00 6 – 6 1
23039030–09 74–20–00 1 – 10 1
74–20–00 2 – 5 1
74–20–00 4 – 9 1
23039030–10 74–20–00 1 – 10 AR
74–20–00 2 – 5 AR
74–20–00 4 – 9 AR
23039030–11 72–30–00 2 – 6 1
74–20–00 1 – 10 AR
74–20–00 2 – 5 AR
74–20–00 4 – 9 AR
23039030–20 73–20–00 1 – 17 1
73–20–00 2 – 12 1
73–20–00 4 – 12 1
73–20–00 5 – 14 1
KITS 1 – 13 1
23039030–27 73–10–00 1 – 5 1
73–10–00 1 – 28 1
73–10–00 2 – 5 1
73–10–00 3 – 5 1
73–10–00 4 – 6 2
73–10–00 5 – 8 2
KITS 1 – 10 1
23039043 73–21–00 1 – 33 3
KITS 1 – 1 3
KITS 1 – 2 3
KITS 1 – 3 3
23039751 72–50–00 4 – 23 1
23039755 72–60–00 2 – 1 1
23039775 72–60–00 5 – 29 2
72–60–00 6 – 25 2
23039776 72–60–00 5 – 18 1
72–60–00 6 – 16A 1
23039777 72–60–00 5 – 16 1
72–60–00 6 – 15 1
23039778 72–60–00 5 – 27 1
23039779 72–60–00 5 – 16 1
23039780 72–60–00 5 – 27 1
23039781 72–00–00 1 – 1 1
23039782 72–60–00 1 – 1 1
23039783 72–00–00 4 – 1 1
23039784 72–40–00 1 – 10 1
23039785 73–20–00 1 – 26 1
73–20–00 2 – 26A 1
73–20–00 4 – 35 1
23039786 74–20–00 2 – 12 1
NUMERICAL INDEX
NUMERIC
PAGE 21
DEC 15/01
TOTAL
23039786 74–20–00 3 – 7 1
74–20–00 4 – 11 1
23039792 72–30–00 1 – 41 1
23039793 72–60–00 12 – 23 1
23039794 72–60–00 12 – 1 1
23050812 72–60–00 2 – 16A 1
23050813 72–60–00 2 – 16C 1
23050814 72–30–00 1 – 28 1
23050824 72–00–00 1 – 20 1
72–00–00 2 – 20 1
72–00–00 3 – 20 1
23050826 72–00–00 1 – 2 1
23050841 72–50–00 4 – 28 3
23050844 KITS 1 – 12 1
23050886 73–21–00 5 – 1 1
23050887 73–21–00 7 – 1 1
23050888 73–21–00 6 – 2 1
23051058 72–30–00 1 – 33 AR
23051064 72–30–00 1 – 33 AR
23051074 72–50–00 4 – 45 AR
23051099 72–30–00 2 – 9 1
23051100 72–40–00 1 – 27 1
23051119 72–30–00 2 – 13 1
23051122 72–30–00 2 – 11 1
23051123 72–30–00 2 – 8 1
23051137 72–30–00 1 – 41 AR
23051140 KITS 1 – 2 1
23051142 KITS 1 – 1 1
23051145 KITS 1 – 3 1
23051146 73–20–00 5 – 40 1
23051147 72–30–00 1 – 14A 1
23051149 72–00–00 1 – 20 1
72–00–00 2 – 20 1
72–00–00 3 – 20 1
23051609 72–30–00 1 – 1 1
23051635 72–50–00 4 – 23 1
23051643 72–30–00 1 – 1 1
23051644 72–30–00 1 – 41 1
23051652 73–20–00 5 – 59 1
23051653 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
23051867–8 73–21–00 6 – 11 ALT
23051996 73–20–00 5 – 59 1
23052266 72–30–00 1 – 41 AR
23052267 72–30–00 1 – 41 AR
23052268 72–30–00 1 – 41 AR
23052269 72–30–00 1 – 41 AR
23052270 72–30–00 1 – 1 1
23052272 72–60–00 12 – 2 1
NUMERICAL INDEX
NUMERIC
PAGE 22
DEC 15/01
TOTAL
23052280 73–20–00 1 – 43 AR
73–20–00 4 – 45 AR
23052281 73–20–00 5 – 59 1
23052282 73–20–00 5 – 59 1
23052286 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23052360 72–60–00 12 – 2 1
23052363 72–05–00 1 – 48 1
72–05–00 2 – 38 1
72–05–00 3 – 46 1
23052389 72–30–00 1 – 41 1
23052604 73–21–00 1 – 25 1
23052954 72–05–00 1 – 28 2
72–05–00 2 – 21A 2
72–05–00 4 – 20 2
23052955 72–05–00 1 – 22 1
72–05–00 2 – 17A 1
72–05–00 3 – 16 1
72–05–00 4 – 14A 1
72–60–00 1 – 57 2
72–60–00 2 – 54 2
72–60–00 3 – 48 2
72–60–00 4 – 49 1
73–10–00 4 – 28 1
73–10–00 5 – 33 1
HISTORICAL PARTS
23053258 72–60–00 10 – 15 1
23053263 72–50–00 1 – 34 4
77–20–00 1 – 7 REF
KITS 1 – 15 4
23053280 72–50–00 3 – 11A AR
23053286 74–20–00 2 – 28 1
74–20–00 5 – 24 1
KITS 1 – 4 1
23053291 72–60–00 10 – 24 1
23053295 73–10–00 4 – 14 1
73–10–00 5 – 16 1
23053296 73–10–00 4 – 15 1
73–10–00 5 – 17 1
23053299 72–50–00 4 – 24 1
KITS 1 – 15 1
23053308 KITS 1 – 5 AR
23053310 72–30–00 1 – 1 1
23053323 72–60–00 13 – 1 1
23053324 72–60–00 13 – 1 1
23053326 72–60–00 2 – 50 1
NUMERICAL INDEX
NUMERIC
PAGE 23
DEC 15/01
TOTAL
23053327 72–60–00 1 – 36 ALT

72–60–00 2 – 34 ALT
72–60–00 3 – 29 ALT
72–60–00 4 – 29 ALT
72–60–00 4 – 37 ALT
23053329 72–60–00 1 – 39 ALT
72–60–00 2 – 39 ALT
72–60–00 3 – 34 ALT
72–60–00 4 – 32 ALT
72–60–00 4 – 34 ALT
23053330 72–50–00 4 – 25 AR
23053331 72–60–00 1 – 46 ALT
72–60–00 2 – 44 ALT
72–60–00 3 – 39 ALT
72–60–00 4 – 28 ALT
72–60–00 4 – 39 ALT
72–60–00 6 – 4 ALT
72–60–00 6 – 12 ALT
23053332 72–60–00 1 – 43 ALT
72–60–00 2 – 41 ALT
72–60–00 3 – 36 ALT
72–60–00 4 – 31 ALT
72–60–00 4 – 36 ALT
72–60–00 6 – 3 ALT
72–60–00 8 – 24 ALT
23053333 72–60–00 1 – 1 1
23053349 72–60–00 2 – 1 AR
23053958 72–00–00 1 – 2 1
23053960 72–60–00 4 – 1 1
23053961 72–60–00 6 – 27 1
23053962 72–60–00 7 – 27 1
72–60–00 8 – 40 1
23053963 72–60–00 15 – 1 1
23053965 72–60–00 16 – 38 1
23053966 72–60–00 14 – 1 1
23053967 72–60–00 6 – 24 1
23053968 72–60–00 6 – 31 1
72–60–00 8 – 38 1
23053970 72–60–00 6 – 29 1
23053971–1 72–60–00 8 – 39 AR
23053971–2 72–60–00 8 – 39 AR
23053971–3 72–60–00 8 – 39 AR
23053971–4 72–60–00 8 – 39 AR
23053971–5 72–60–00 8 – 39 AR
23053972 72–60–00 8 – 34 1
23053973 72–60–00 6 – 32 1
23053974 72–60–00 8 – 30 1
23053975 72–60–00 6 – 28 1
23053980 72–60–00 16 – 1 1
23053982–1 72–60–00 14 – 28 1
NUMERICAL INDEX
NUMERIC
PAGE 24
DEC 15/01
TOTAL
23053982–2 72–60–00 14 – 28 AR
23053982–3 72–60–00 14 – 28 AR
23053990 72–30–00 1 – 37 1
23053993 73–20–00 1 – 52 1
73–20–00 2 – 40 1
73–20–00 4 – 49 1
73–20–00 5 – 49 1
23053994 72–05–00 3 – 25 2
23053995 72–05–00 1 – 16 1
72–05–00 2 – 16 1
72–05–00 2 – 20A 1
23053996 72–60–00 9 – 29 1
23053999 72–00–00 1 – 1 1
23054053 73–21–00 1 – 25 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
23054601 72–60–00 10 – 15 1
23054602 73–10–00 1 – 19 1
73–10–00 2 – 10 1
73–10–00 3 – 24 1
73–10–00 4 – 32 1
73–10–00 5 – 37 1
23054637 72–60–00 2 – 57 1
23054646 72–50–00 3 – 1 1
23055354 72–05–00 1 – 61 AR
72–05–00 2 – 45 AR
72–05–00 3 – 50 AR
72–05–00 4 – 48 AR
23055355 72–05–00 1 – 62 AR
72–05–00 2 – 46 AR
72–05–00 3 – 51 AR
72–05–00 4 – 49 AR
23055356 72–05–00 1 – 63 AR
72–05–00 2 – 47 AR
72–05–00 3 – 52 AR
72–05–00 4 – 50 AR
23055438 72–50–00 4 – 25 1
23055441–01 72–50–00 4 – 27 5
23055441–02 72–50–00 4 – 27 AR
23055442 72–60–00 2 – 50 1
23055450 73–21–00 1 – 1 1
23055452 72–05–00 4 – 1 1
23055453 72–00–00 4 – 1 1
23055454 73–21–00 8 – 1 1
23055455 72–30–00 2 – 11 1
23055460–04 HISTORICAL PARTS
23055460–05 72–00–00 6 – 19 2
NUMERICAL INDEX
NUMERIC
PAGE 25
DEC 15/01
TOTAL

23055933 72–60–00 16 – 38 AR
23056103 72–30–00 2 – 2 1
23056107 72–50–00 3 – 22 1
23056135 72–50–00 3 – 15 1
23056601 72–60–00 8 – 32 1
23056633 72–30–00 2 – 30 1
23056634 72–30–00 2 – 28 1
23056635 72–30–00 1 – 1 1
23056636 72–30–00 1 – 41 1
23056637 72–30–00 1 – 41 1
23056645 72–50–00 3 – 36 1
23056648 72–00–00 1 – 21 1
23056649 73–20–00 2 – 15 1
73–20–00 5 – 19 1
KITS 1 – 4 1
23056926 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23056927 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
23057101 72–50–00 4 – 45 AR
23057107 72–60–00 4 – 46 1
23057136 73–10–00 5 – 7 1
23057144 72–30–00 1 – 41 AR
23057145 72–50–00 4 – 37 1
23057146 72–60–00 8 – 34 1
23057160 72–50–00 3 – 15 1
23057332 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
23057333 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23057339 73–10–00 2 – 7 ALT
23057340 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
23057500 72–05–00 1 – 49 AR
72–05–00 2 – 29 AR
72–05–00 3 – 36 AR
72–05–00 4 – 28 AR
23057501 72–05–00 1 – 50 AR
72–05–00 2 – 30 AR
NUMERICAL INDEX
NUMERIC
PAGE 26
DEC 15/01
TOTAL
23057501 72–05–00 3 – 37 AR
72–05–00 4 – 29 AR
23057502 72–05–00 2 – 36 AR
72–05–00 3 – 43 AR
23057503–16 72–05–00 1 – 38 2
72–05–00 2 – 31 2
72–05–00 3 – 38 2
72–05–00 4 – 30 2
23057504–01 72–05–00 1 – 41 AR
72–05–00 2 – 34 AR
72–05–00 3 – 41 AR
72–05–00 4 – 33 AR
23057504–02 72–05–00 4 – 34 AR
23057506–02 72–05–00 1 – 52 1
72–05–00 4 – 39 1
23057507 72–05–00 1 – 42 4
72–05–00 1 – 51 AR
72–05–00 2 – 35 4
72–05–00 3 – 42 4
72–05–00 4 – 38 AR
23057509–02 72–05–00 1 – 43 AR
23057510 72–05–00 1 – 53 AR
72–05–00 4 – 40 AR
23057511–01 72–05–00 1 – 54 AR
72–05–00 4 – 41 AR
23057511–1101 72–05–00 1 – 54 AR
23057512–01 72–05–00 1 – 55 AR
72–05–00 4 – 42 AR
23057512–03 72–05–00 1 – 55 AR
23057513–GC004 72–05–00 1 – 56 AR
23057513–GD110 72–05–00 1 – 56 AR
23057514–FM001 72–05–00 1 – 57 AR
23057533 72–05–00 1 – 58 1
72–05–00 2 – 42 1
72–05–00 3 – 47 1
72–05–00 4 – 45 1
23057750 72–60–00 6 – 32 1
23057753 72–60–00 14 – 1 1
23057782 73–20–00 3 – 8 1
73–20–00 6 – 8 1
KITS 1 – 4 1
23057783 73–20–00 6 – 9 1
23057784 72–50–00 1 – 13 1
23057873 73–20–00 1 – 65 1
73–20–00 2 – 48 1
23057874 73–20–00 4 – 59 1
23057875 73–20–00 5 – 59 1
23057876 73–20–00 5 – 59 1
23058108 KITS 1 – 4 AR
NUMERICAL INDEX
NUMERIC
PAGE 27
DEC 15/01
TOTAL
23058109 73–20–00 3 – 7 1
73–20–00 6 – 7 1
KITS 1 – 4 1
23058110 72–00–00 5 – 2 1
23058112 73–20–00 3 – 1 1
73–20–00 6 – 1 1
KITS 1 – 4 1
23058128 72–50–00 4 – 34 1
23058131 72–50–00 4 – 32 1
23058137 72–50–00 3 – 36 1
23058138 72–50–00 4 – 46 1
23058145 72–50–00 4 – 46 1
23058149 72–50–00 4 – 47 1
23058149–1 72–50–00 4 – 47 AR
23058149–2 72–50–00 4 – 47 AR
23058149–3 72–50–00 4 – 47 AR
23058149–4 72–50–00 4 – 47 AR
23058149–5 72–50–00 4 – 47 AR
23058547 72–05–00 1 – 59 AR
72–05–00 2 – 43 AR
72–05–00 3 – 48 AR
72–05–00 4 – 46 AR
23058831 72–05–00 1 – 60 AR
72–05–00 2 – 44 AR
72–05–00 3 – 49 AR
72–05–00 4 – 47 AR
23059565 72–60–00 16 – 38 1
23059566–136 72–60–00 6 – 31A AR
72–60–00 8 – 38A AR
23059566–142 72–60–00 6 – 31B AR
72–60–00 8 – 38B AR
23059568–1 72–60–00 13 – 21 1
72–60–00 14 – 17 1
23059568–2 72–60–00 13 – 21 AR
72–60–00 14 – 17 AR
23059568–3 72–60–00 13 – 21 AR
72–60–00 14 – 17 AR
23059575 72–60–00 6 – 28 1
23059576 72–60–00 13 – 1 1
23059577 72–60–00 13 – 1 1
23059578 72–60–00 14 – 1 1
23059587 72–60–00 1 – 45 1
72–60–00 2 – 43 1
72–60–00 3 – 38 1
72–60–00 4 – 38 1
23059588 72–60–00 5 – 26 1
23059589 72–50–00 4 – 45 AR
23059591 72–60–00 8 – 32 1
23059594 72–30–00 1 – 20 1
23059790 73–20–00 1 – 43 1
NUMERICAL INDEX
NUMERIC
PAGE 28
DEC 15/01
TOTAL
23059790 73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23059932 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
23059933 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23060015–08 73–21–00 2 – 7 1
23060205 75–10–00 5 – 1 1
23060409 73–20–00 3 – 9 1
73–20–00 6 – 9 1
KITS 1 – 4 1
23060421–1 72–60–00 8 – 39 AR
23060421–2 72–60–00 8 – 39 AR
23060421–3 72–60–00 8 – 39 AR
23060421–4 72–60–00 8 – 39 AR
23060427 73–20–00 2 – 1 1
23060495 72–50–00 3 – 1 1
23060815 74–20–00 1 – 1 ALT
74–20–00 3 – 1 ALT
74–20–00 4 – 1 ALT
74–20–00 5 – 1 ALT
23060816 74–20–00 1 – 2 ALT
74–20–00 2 – 1 ALT
74–20–00 4 – 2 ALT
23061239 72–30–00 1 – 15 1
23061246 72–50–00 4 – 48 1
23061904 72–60–00 4 – 46 1
23061906 72–30–00 1 – 41 AR
23061907 72–30–00 1 – 41 AR
23061913 72–60–00 2 – 1 AR
23061917 72–60–00 8 – 32 1
23061918 72–60–00 6 – 29 1
23062006 KITS 1 – 9 AR
23062028 72–50–00 4 – 37 1
23062029 72–50–00 4 – 25 1
23062032 72–50–00 1 – 1 1
23062033 72–50–00 4 – 22 1
23062052 72–00–00 1 – 1 1
23062056 72–50–00 4 – 3 1
23062062 72–50–00 4 – 4 1
23062065 72–00–00 2 – 1 1
23062066 72–00–00 5 – 1 1
23062067 73–21–00 2 – 1 1
23062070 72–50–00 4 – 2 1
23062087 72–00–00 4 – 24 1
72–00–00 5 – 24 1
NUMERICAL INDEX
NUMERIC
PAGE 29
DEC 15/01
TOTAL
23062087 72–00–00 6 – 24 1
KITS 1 – 14 1
KITS 1 – 18 1
23062098 72–00–00 4 – 1 1
23062751 72–30–00 1 – 19 1
KITS 1 – 5 1
23062752 72–50–00 2 – 31 1
23063357 72–60–00 9 – 40 1
23063369 72–60–00 5 – 41 1
23063370 72–60–00 7 – 34 1
23063371 72–60–00 5 – 40 3
72–60–00 5 – 42 1
72–60–00 6 – 45 3
72–60–00 7 – 31 1
72–60–00 8 – 29 AR
72–60–00 8 – 42 1
23063372 72–60–00 7 – 32 1
72–60–00 8 – 43 1
23063373 72–60–00 9 – 41 1
23063390 72–50–00 1 – 28 1
77–20–00 1 – 1 REF
23063398 72–30–00 1 – 41 1
23063404 72–40–00 1 – 27 1
23063448 72–40–00 1 – 27 1
23064007 72–00–00 1 – 2A 1
72–00–00 2 – 2A 1
72–00–00 3 – 2A 1
23064021 73–21–00 1 – 26 1
23064037 72–30–00 1 – 2A 1
23064039 72–60–00 1 – 2 1
72–60–00 2 – 2 1
72–60–00 3 – 2 1
72–60–00 4 – 2 1
23064040 72–50–00 1 – 3A 1
23064046 75–10–00 5 – 41 1
23064061 72–50–00 1 – 3A 1
23064567 72–60–00 7 – 33 2
72–60–00 8 – 41 2
23064570 72–40–00 1 – 27 1
23064577 72–30–00 1 – 37 1
23064593 72–30–00 2 – 11 1
23064598 75–10–00 5 – 1 1
23064603 72–60–00 15 – 1 1
23064604 72–60–00 15 – 1 1
23064605 72–60–00 16 – 1 1
23064606 72–60–00 13 – 1 1
23064607 72–60–00 13 – 1 1
23064608 72–60–00 14 – 1 1
23064612 72–40–00 1 – 1 2
23064617 72–60–00 8 – 32 1
NUMERICAL INDEX
NUMERIC
PAGE 30
DEC 15/01
TOTAL
23064620 75–10–00 1 – 2 1
75–10–00 2 – 2 1
75–10–00 3 – 2 1
75–10–00 4 – 2 1
23064624 73–20–00 2 – 1 1
23064625 73–20–00 2 – 1 1
KITS 1 – 4 1
23064633 72–00–00 4 – 29 AR
72–00–00 5 – 29 AR
72–00–00 6 – 29 AR
23064638 72–60–00 9 – 44 1
23065115 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
23065116 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
73–20–00 5 – 41 AR
23065125 73–20–00 1 – 65 1
73–20–00 2 – 48 1
23065126 73–20–00 4 – 59 1
23065127 73–20–00 5 – 59 1
23065128 73–20–00 5 – 59 1
23065133 73–10–00 2 – 7 ALT
23065134 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
23065146 73–20–00 1 – 43 1
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
23065147 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23065472 72–50–00 1 – 13 1
23065484 73–10–00 1 – 29 1
KITS 1 – 10 1
23065485 72–40–00 1 – 15 2
72–50–00 4 – 45 AR
23065489 73–10–00 1 – 30 1
75–10–00 1 – 19 REF
KITS 1 – 10 1
23065552 73–10–00 1 – 25 1
KITS 1 – 10 1
23065557 72–30–00 1 – 1 1
23065569 73–20–00 1 – 10 1
73–20–00 5 – 4 1
KITS 1 – 13 1
23065575 72–50–00 2 – 33 AR
NUMERICAL INDEX
NUMERIC
PAGE 31
DEC 15/01
TOTAL
23065579 72–30–00 1 – 10A AR

23065580 72–50–00 2 – 32 AR
23065801 72–30–00 1 – 19 1
23065813 73–20–00 4 – 5 1
23065814 73–20–00 2 – 5 1
23065824 72–30–00 1 – 19 1
23065834 72–00–00 2 – 2 1
23066652 72–60–00 10 – 24 1
23066654 72–60–00 4 – 46 1
23066662 72–50–00 1 – 1 1
23066663 KITS 1 – 10 1
23066669 72–30–00 2 – 13 1
23066675 72–40–00 1 – 27 1
23066678 72–60–00 5 – 39 2
72–60–00 6 – 44 2
23066685 72–40–00 1 – 27 AR
23066696 72–50–00 1 – 13 1
23066708 72–50–00 4 – 37A AR
23066715 72–30–00 1 – 28 1
KITS 1 – 5 1
23066716 72–30–00 1 – 27 1
KITS 1 – 5 1
23066717 72–50–00 4 – 46 1
23066718 72–50–00 4 – 46 1
23066719 72–50–00 4 – 46 1
23066720 72–50–00 4 – 46 1
23066725 72–50–00 4 – 46 1
23066726 72–50–00 4 – 46 1
23066729 72–50–00 4 – 46 1
23066730 72–50–00 4 – 46 1
23066731 72–50–00 4 – 46 1
23066737 72–30–00 1 – 37 1
23066744 72–50–00 3 – 8 1
23066749 72–50–00 1 – 3 1
23068212 72–00–00 1 – 31 1
72–00–00 2 – 31 1
72–00–00 3 – 31 1
23068214 72–30–00 1 – 7 1
23068215 72–30–00 1 – 5 1
23068245 72–60–00 9 – 11 ALT
23068249 72–05–00 1 – 31 1
72–05–00 2 – 27 1
72–05–00 3 – 28 1
72–05–00 4 – 23 1
75–10–00 1 – 45 1
75–10–00 2 – 23 1
75–10–00 3 – 36 1
75–10–00 4 – 23 1
23068295 72–60–00 5 – 26 1
23068298 72–60–00 9 – 33 1
NUMERICAL INDEX
NUMERIC
PAGE 32
DEC 15/01
TOTAL
23069704 72–50–00 1 – 13 1
23069705 73–10–00 1 – 24 1
KITS 1 – 10 1
23069706 72–00–00 5 – 2 1
23069740 KITS 1 – 14 1
KITS 1 – 18 1
23069751 72–00–00 1 – 8 1
72–00–00 2 – 8 1
72–00–00 3 – 8 1
23069756 KITS 1 – 16 AR
23069757 KITS 1 – 17 AR
23069763 72–40–00 1 – 37 AR
23069764 72–40–00 1 – 38 AR
23069765 72–40–00 1 – 39 AR
23069766 72–40–00 1 – 40 AR
23069767 72–40–00 1 – 41 AR
23069768 72–40–00 1 – 42 AR
23069769 72–40–00 1 – 43 AR
23069770 72–40–00 1 – 44 AR
23069778 72–40–00 1 – 45 AR
23069779 72–40–00 1 – 46 AR
23069780 72–40–00 1 – 47 AR
23069781 72–40–00 1 – 48 AR
23070101 73–20–00 1 – 65 AR
73–20–00 2 – 48 AR
23070102 73–20–00 4 – 59 AR
23070103 73–20–00 5 – 59 AR
23070104 73–20–00 5 – 59 AR
23070106 73–20–00 1 – 65 AR
73–20–00 2 – 48 AR
23070107 73–20–00 4 – 59 AR
23070460 73–10–00 2 – 7 ALT
23070461 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
23070613 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
23071313 72–50–00 3 – 14 1
23071792 72–60–00 5 – 17 1
72–60–00 6 – 16 1
23071895 72–60–00 5 – 15 1
23071897 72–60–00 5 – 16 1
72–60–00 6 – 15 1
23071966 72–00–00 1 – 12 1
72–00–00 2 – 12 1
72–00–00 3 – 12 1
23072374 72–30–00 2 – 28 1
NUMERICAL INDEX
NUMERIC
PAGE 33
DEC 15/01
TOTAL
23072375 72–30–00 2 – 28 1
23072620 KITS 1 – 15 AR
23072848 72–30–00 1 – 37 1
23072862 72–30–00 1 – 37 1
23073466 72–50–00 4 – 46 1
23073472 72–50–00 1 – 12 1
23073520 72–30–00 2 – 28 1
KITS 1 – 6 1
KITS 1 – 7 1
23073521 72–30–00 2 – 30 1
23073566 72–50–00 2 – 31 1
23073639 72–00–00 1 – 2A 1
72–00–00 2 – 2A 1
72–00–00 3 – 2A 1
23073653 73–21–00 1 – 26 1
23073665 72–30–00 1 – 2A 1
KITS 1 – 6 1
KITS 1 – 7 1
23073667 72–60–00 1 – 2 1
72–60–00 2 – 2 1
72–60–00 3 – 2 1
72–60–00 4 – 2 1
KITS 1 – 6 1
KITS 1 – 8 1
23073674 75–10–00 5 – 41 1
23073685 72–50–00 1 – 3A 1
23074076 72–30–00 1 – 37 1
23074361 72–50–00 4 – 24 1
23074362 72–50–00 4 – 29 1
23074384 72–50–00 4 – 25 1
23074531 72–50–00 4 – 22 1
23074694 72–50–00 4 – 23A NP
23074872 72–00–00 4 – 24 ALT
72–00–00 5 – 24 ALT
72–00–00 6 – 24 ALT
KITS 1 – 14 ALT
KITS 1 – 18 ALT
23075363 72–50–00 3 – 15 1
2524692–10 73–20–00 1 – 65 1
73–20–00 2 – 48 1
2524692–11 73–20–00 1 – 65 1
73–20–00 1 – 65 AR
73–20–00 1 – 65 AR
73–20–00 2 – 48 1
73–20–00 2 – 48 AR
73–20–00 2 – 48 AR
2524692–2 73–20–00 1 – 65 1
73–20–00 2 – 48 1
2524692–4 73–20–00 1 – 65 1
73–20–00 2 – 48 1
NUMERICAL INDEX
NUMERIC
PAGE 34
DEC 15/01
TOTAL
2524692–5 73–20–00 1 – 65 1
73–20–00 2 – 48 1
2524692–7 73–20–00 1 – 65 1
73–20–00 2 – 48 1
2524692–8 73–20–00 1 – 65 1
73–20–00 2 – 48 1
2524692–9 73–20–00 1 – 65 1
73–20–00 2 – 48 1
73–20–00 5 – 59 1
2524745–13 73–20–00 1 – 43 1
2524745–14 73–20–00 1 – 43 ALT
73–20–00 1 – 43 ALT
73–20–00 1 – 43 ALT
73–20–00 1 – 43 ALT
2524745–14–M 73–20–00 1 – 43 ALT
2524745–14M 73–20–00 1 – 43 ALT
2524745–17 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
2524745–17M 73–20–00 1 – 43 ALT
2524745–19 73–20–00 1 – 43 1
73–20–00 1 – 43 ALT
73–20–00 4 – 45 1
73–20–00 4 – 45 ALT
73–20–00 4 – 45 ALT
2524745–19–M 73–20–00 1 – 43 ALT
73–20–00 4 – 45 ALT
73–20–00 4 – 45 ALT
2524745–19M 73–20–00 1 – 43 ALT
2524745–20 73–20–00 1 – 43 1
73–20–00 1 – 43 1
73–20–00 4 – 45 1
73–20–00 4 – 45 1
2524745–22 73–20–00 1 – 43 ALT
2524745–3 73–20–00 1 – 43 ALT
2524745–5 73–20–00 1 – 43 1
2524745–6 73–20–00 1 – 43 1
2524745–9 73–20–00 1 – 43 1
2524827–3 73–20–00 5 – 59 1
2524827–4 73–20–00 5 – 59 1
2524827–5 73–20–00 5 – 59 1
2524827–6 73–20–00 5 – 59 1
2524827–7 73–20–00 5 – 59 1
2524854–1 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
2524854–1M 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524854–3 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
NUMERICAL INDEX
NUMERIC
PAGE 35
DEC 15/01
TOTAL
2524854–3 73–20–00 4 – 45 ALT

2524854–3M 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
2524854–4 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 4 – 45 ALT
2524854–6 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
73–20–00 2 – 36 AR
2524854–7 73–20–00 1 – 43 AR
73–20–00 4 – 45 AR
2524883–1 73–20–00 4 – 59 1
2524883–2 73–20–00 4 – 59 1
2524883–4 73–20–00 4 – 59 1
2524883–5 73–20–00 4 – 59 1
2524883–6 73–20–00 4 – 59 1
2524883–7 73–20–00 4 – 59 1
2524883–8 73–20–00 4 – 59 1
73–20–00 4 – 59 AR
73–20–00 4 – 59 AR
2524922–4 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524922–5 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524922–6 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524922–7 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2524922–8 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2524922–9 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2524944–1 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–10 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
2524944–11 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
NUMERICAL INDEX
NUMERIC
PAGE 36
DEC 15/01
TOTAL
2524944–11 73–20–00 4 – 45 AR
2524944–12 73–20–00 1 – 43 1
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
2524944–2 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–3 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–4 73–20–00 1 – 43 AR
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–5 73–20–00 1 – 43 AR
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–6 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
2524944–7 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
2524944–8 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
2537533–10 73–20–00 1 – 50 2
73–20–00 2 – 39E 2
73–20–00 4 – 48E 2
73–20–00 5 – 48 2
2538801 73–20–00 1 – 51 1
73–20–00 2 – 39 F 1
73–20–00 4 – 48 F 1
73–20–00 5 – 48A 1
2541865 73–20–00 1 – 58 1
73–20–00 2 – 44B 1
2549001–1 73–20–00 1 – 43 ALT
73–20–00 2 – 36 ALT
2549001–2 73–20–00 1 – 43 1
73–20–00 2 – 36 ALT
2549010–1 73–20–00 1 – 43 AR
2549011–1 73–20–00 1 – 43 AR
2549012–1 73–20–00 1 – 43 AR
73–20–00 2 – 36 ALT
2549068–2 73–20–00 5 – 59 1
2549068–3 73–20–00 5 – 59 1
2549068–4 73–20–00 5 – 59 1
73–20–00 5 – 59 AR
2549068–7 73–20–00 5 – 59 AR
2549092–1 73–20–00 1 – 43 1
73–20–00 2 – 36 1
NUMERICAL INDEX
NUMERIC
PAGE 37
DEC 15/01
TOTAL
2549092–1 73–20–00 4 – 45 1
2549092–2 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2549092–3 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2549092–4 73–20–00 1 – 43 AR
73–20–00 2 – 36 AR
73–20–00 4 – 45 AR
73–20–00 5 – 41 AR
2549092–5 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2549092–6 73–20–00 1 – 43 1
73–20–00 2 – 36 1
73–20–00 4 – 45 1
73–20–00 5 – 41 1
2549909–1 73–20–00 5 – 41 1
388100–5 73–10–00 2 – 7 ALT
394400–1 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
4CVF646 72–00–00 4 – 25 NP
72–00–00 5 – 25 NP
72–00–00 6 – 25 NP
4CVH653 72–00–00 4 – 30 NP
72–00–00 5 – 30 NP
72–00–00 6 – 30 NP
4CVP61 72–00–00 4 – 28 NP
72–00–00 5 – 28 NP
72–00–00 6 – 28 NP
4CVS61 72–00–00 4 – 27 NP
72–00–00 5 – 27 NP
72–00–00 6 – 27 NP
400621 73–20–00 1 – 18 ALT
73–20–00 2 – 14A ALT
73–20–00 4 – 14A ALT
73–20–00 5 – 15 ALT
47077 73–10–00 6 – 11 AR
47079 73–10–00 6 – 9 1
47080 73–10–00 6 – 6 1
47085 73–10–00 6 – 5 1
47086 73–10–00 6 – 3 1
47102 73–10–00 6 – 2 1
47104 73–10–00 6 – 14 1
NUMERICAL INDEX
NUMERIC
PAGE 38
DEC 15/01
TOTAL
47105 73–10–00 6 – 13 1
47107 73–10–00 6 – 12 1
47108 73–10–00 6 – 10 1
47109 73–10–00 6 – 15 1
49583 73–10–00 6 – 4 1
5000950D 73–10–00 2 – 6 1
5004506 73–10–00 1 – 16 1
73–10–00 3 – 21 1
73–10–00 4 – 29 1
73–10–00 5 – 34 1
51376 74–20–00 1 – 15 4
74–20–00 2 – 22 2
74–20–00 3 – 17 2
74–20–00 4 – 21 4
74–20–00 5 – 14 2
51377 74–20–00 1 – 14 4
74–20–00 2 – 21 2
74–20–00 3 – 16 2
74–20–00 4 – 20 4
74–20–00 5 – 13 2
51378 74–20–00 1 – 13 4
74–20–00 2 – 20 2
74–20–00 3 – 15 2
74–20–00 4 – 19 4
74–20–00 5 – 12 2
51682 74–20–00 1 – 16 4
74–20–00 2 – 23 2
74–20–00 3 – 18 2
74–20–00 4 – 22 4
74–20–00 5 – 15 2
5228317 73–10–00 6 – 17 1
5232274 73–10–00 6 – 7 NP
5232328 73–10–00 6 – 9 1
5232358 73–10–00 6 – 11 AR
5232403 73–10–00 6 – 5 1
5233412 73–10–00 6 – 6 1
5233413 73–10–00 6 – 8 NP
5233414 73–10–00 6 – 3 1
5233424 73–10–00 6 – 16 1
5233589 73–10–00 6 – 13 1
5233591 73–10–00 6 – 12 1
5233592 73–10–00 6 – 15 1
5233594 73–10–00 6 – 10 1
5233597 73–10–00 6 – 2 1
5233598 73–10–00 6 – 14 1
5233599 73–10–00 6 – 4 1
528535–13 73–10–00 6 – 16 1
528536–4 73–10–00 6 – 17 1
52895 74–20–00 1 – 17 4
74–20–00 2 – 24 2
NUMERICAL INDEX
NUMERIC
PAGE 39
DEC 15/01
TOTAL
52895 74–20–00 3 – 19 2
74–20–00 4 – 23 4
74–20–00 5 – 16 2
54701 74–20–00 1 – 12 4
74–20–00 2 – 19 2
74–20–00 3 – 14 2
74–20–00 4 – 18 4
74–20–00 5 – 11 2
54728 74–20–00 1 – 18 4
74–20–00 2 – 25 2
74–20–00 3 – 20 2
74–20–00 4 – 24 4
74–20–00 5 – 17 2
557S6 73–20–00 1 – 45A 1
73–20–00 2 – 39 1
73–20–00 4 – 48 1
6718476 72–50–00 1 – 30 1
77–20–00 1 – 3 REF
6718477 72–50–00 1 – 31 1
77–20–00 1 – 4 REF
6719546 72–05–00 1 – 15 6
72–05–00 2 – 15 6
72–05–00 3 – 15 6
6726656–168 72–60–00 5 – 35 1
72–60–00 6 – 40 1
KITS 1 – 6 1
KITS 1 – 8 1
6726656–244 72–50–00 2 – 21 1
6726656–314 72–60–00 6 – 26 1
6726656–356 72–60–00 5 – 38 1
72–60–00 6 – 43 1
6726656–96 72–30–00 2 – 29 1
KITS 1 – 6 1
KITS 1 – 7 1
6735102–12 72–60–00 11 – 19 1
72–60–00 12 – 20 1
6735927–62 72–60–00 10 – 2 1
6739844–5 73–21–00 1 – 6 1
73–21–00 2 – 3 1
73–21–00 2 – 8 1
73–21–00 3 – 3 1
73–21–00 4 – 3 1
74–20–00 1 – 11 1
74–20–00 4 – 6 1
74–20–00 5 – 10 1
6739844–7 73–21–00 2 – 7 1
6739844–9 73–21–00 1 – 19 1
73–21–00 4 – 7 1
6746974 72–50–00 1 – 38 1
77–20–00 1 – 11 REF
NUMERICAL INDEX
NUMERIC
PAGE 40
DEC 15/01
TOTAL
6746975 72–50–00 1 – 39 1
77–20–00 1 – 12 REF
6748072–187 72–50–00 3 – 37 1
6748072–267 72–50–00 3 – 21 2
6748072–283 72–30–00 2 – 18 1
6749213–02 72–00–00 1 – 38 7
72–00–00 2 – 38 7
72–00–00 3 – 38 7
72–50–00 1 – 16 2
72–50–00 3 – 4A 1
6784419–2 75–10–00 1 – 13 1
75–10–00 2 – 13 1
75–10–00 3 – 13 1
75–10–00 4 – 13 1
KITS 1 – 16 1
6784419–3 72–50–00 2 – 10 1
KITS 1 – 15 1
6784419–4 75–10–00 1 – 8 1
75–10–00 2 – 8 1
75–10–00 3 – 8 1
75–10–00 4 – 8 1
6784419–8 72–00–00 1 – 51 2
72–00–00 2 – 51 2
72–00–00 3 – 51 2
72–50–00 1 – 9 2
72–50–00 2 – 13 2
KITS 1 – 15 4
6800088–10 72–05–00 1 – 11 1
72–05–00 2 – 10 1
72–05–00 3 – 10 1
72–05–00 4 – 11 1
6800088–11 72–05–00 1 – 11 1
72–05–00 2 – 10 1
72–05–00 3 – 10 1
6800088–16 72–05–00 1 – 12 1
72–05–00 2 – 11 1
72–05–00 3 – 11 1
72–05–00 4 – 12 1
6800088–17 72–05–00 1 – 12A 1
72–05–00 2 – 12 1
72–05–00 3 – 12 1
72–05–00 4 – 13 1
6800088–3 72–05–00 1 – 12A 1
NUMERICAL INDEX
NUMERIC
PAGE 41
DEC 15/01
TOTAL
6800088–3 72–05–00 2 – 12 1
72–05–00 3 – 12 1
72–05–00 4 – 13 1
6800088–8 72–05–00 1 – 12C ALT
6800193–164 72–05–00 1 – 45 1
72–05–00 3 – 45 1
72–05–00 4 – 36 1
6800193–167 72–05–00 1 – 7 5
72–05–00 2 – 7 4
72–05–00 3 – 7 4
72–05–00 4 – 8 4
6800193–170 72–05–00 1 – 46 1
6800218–321 72–05–00 1 – 4 1
72–05–00 2 – 4 1
72–05–00 3 – 4 1
72–05–00 4 – 4 1
6800218–322 72–05–00 1 – 3 1
72–05–00 2 – 3 2
72–05–00 2 – 41 1
72–05–00 3 – 3 1
72–05–00 4 – 3 3
6800218–325 72–05–00 1 – 2 2
72–05–00 1 – 8 ALT
72–05–00 2 – 2 2
72–05–00 2 – 8 ALT
72–05–00 3 – 2 2
72–05–00 3 – 8 ALT
72–05–00 4 – 2 2
72–05–00 4 – 10 ALT
6800218–327 72–05–00 1 – 5 1
72–05–00 2 – 5 1
72–05–00 3 – 5 1
72–05–00 4 – 5 1
6800287 72–05–00 1 – 39 1
72–05–00 2 – 32 1
72–05–00 3 – 39 1
72–05–00 4 – 31 1
6805372 73–20–00 1 – 52 1
73–20–00 2 – 40 1
73–20–00 4 – 49 1
6808390 72–50–00 4 – 35 1
6809796 72–60–00 9 – 18 1
6810345 72–60–00 9 – 23 1
6810357 72–60–00 11 – 27 3
72–60–00 12 – 28 3
6810358 72–60–00 11 – 26 1
72–60–00 12 – 27 1
6810388–96 72–60–00 11 – 3 2
72–60–00 12 – 3 2
6810421 72–60–00 7 – 20 1
NUMERICAL INDEX
NUMERIC
PAGE 42
DEC 15/01
TOTAL
6810448 72–60–00 11 – 5 1
72–60–00 12 – 5 1
6810498 72–60–00 11 – 11 NP
72–60–00 12 – 11 NP
6816237–45 75–10–00 5 – 40 2
6818682–1032 75–10–00 5 – 8 1
75–10–00 5 – 31 1
6820055–7 72–00–00 1 – 42 7
72–00–00 2 – 42 7
72–00–00 3 – 42 7
72–50–00 3 – 3 20
72–50–00 4 – 8 18
6820055–8 72–40–00 1 – 20 18
72–50–00 3 – 3 4
72–50–00 4 – 8 3
6820055–9 72–40–00 1 – 22 6
6820085 72–05–00 1 – 16 1
72–05–00 2 – 16 1
72–05–00 3 – 16 1
6820285 72–30–00 1 – 20 1
6820512–1 72–30–00 2 – 20 AR
6820512–2 72–30–00 2 – 20 AR
6820512–3 72–30–00 2 – 20 AR
6820512–4 72–30–00 2 – 20 AR
6820556–01 72–60–00 9 – 28 2
6820556–02 72–60–00 9 – 28 AR
6820556–03 72–60–00 9 – 28 AR
6820556–04 72–60–00 9 – 28 AR
6820556–05 72–60–00 9 – 28 AR
6820556–06 72–60–00 9 – 28 AR
6820557 72–60–00 9 – 24 1
6820586 72–60–00 7 – 26 1
6820588 72–60–00 7 – 21 1
6823112 73–21–00 1 – 30 6
6823169 72–30–00 2 – 25 1
KITS 1 – 6 1
KITS 1 – 7 1
6823201–17000 72–50–00 1 – 32 AR
77–20–00 1 – 5 REF
6823224–16000 72–50–00 1 – 33 AR
77–20–00 1 – 6 REF
6823260 72–00–00 4 – 10 1
72–00–00 5 – 10 1
72–00–00 6 – 10 1
73–10–00 1 – 4 1
73–10–00 2 – 4 1
73–10–00 3 – 4 1
73–10–00 4 – 5 2
73–10–00 4 – 16 1
73–10–00 5 – 6 1
NUMERICAL INDEX
NUMERIC
PAGE 43
DEC 15/01
TOTAL
6823260 73–10–00 5 – 20 1
73–20–00 4 – 25 ALT
6823481–7000 72–50–00 3 – 17 AR
6823492–13 72–05–00 1 – 47 ALT
6824314 72–60–00 10 – 3 2
6824316 72–60–00 10 – 7 NP
6824711 72–50–00 4 – 13 ALT
6824712 72–50–00 4 – 13 ALT
6824741 72–60–00 1 – 38 1
72–60–00 1 – 43 1
72–60–00 2 – 36 1
72–60–00 2 – 41 1
72–60–00 3 – 31 1
72–60–00 3 – 36 1
72–60–00 5 – 3 1
72–60–00 5 – 45 2
72–60–00 7 – 25 1
6824742 72–60–00 1 – 38 ALT
72–60–00 1 – 43 ALT
72–60–00 2 – 36 ALT
72–60–00 2 – 41 ALT
72–60–00 3 – 31 ALT
72–60–00 3 – 36 ALT
72–60–00 5 – 3 ALT
72–60–00 5 – 45 ALT
72–60–00 7 – 25 ALT
6824744 72–60–00 1 – 35 1
72–60–00 1 – 46 2
72–60–00 2 – 33 1
72–60–00 2 – 44 2
72–60–00 3 – 28 1
72–60–00 3 – 39 2
72–60–00 5 – 4 1
72–60–00 5 – 12 1
72–60–00 5 – 47 1
6825546–1 72–60–00 13 – 18 1
72–60–00 15 – 6 1
6825546–2 72–60–00 13 – 18 AR
72–60–00 15 – 6 AR
6825546–3 72–60–00 13 – 18 AR
72–60–00 15 – 6 AR
6826835 72–60–00 7 – 16 1
72–60–00 8 – 16 1
6828831–918 72–60–00 6 – 35 ALT
6828832–836 72–30–00 1 – 45 12
72–40–00 1 – 23 12
6840109 72–60–00 5 – 11 1
72–60–00 6 – 11 1
6840111 72–60–00 9 – 19 1
6840113 72–60–00 9 – 29 1
NUMERICAL INDEX
NUMERIC
PAGE 44
DEC 15/01
TOTAL
6840136 72–60–00 9 – 44 1
6840364–12 72–05–00 4 – 5 1
6840364–3 72–05–00 1 – 6 1
72–05–00 2 – 4 1
72–05–00 2 – 6 1
72–05–00 3 – 6 1
72–05–00 4 – 4 1
72–05–00 4 – 6 1
6840364–4 72–05–00 1 – 6A 2
72–05–00 2 – 3 2
72–05–00 3 – 33 2
72–05–00 4 – 3 1
72–05–00 4 – 7 2
6840364–8 72–05–00 1 – 8 1
72–05–00 2 – 2 2
72–05–00 4 – 2 2
72–05–00 4 – 10 1
6840372–12 72–60–00 15 – 34 2
72–60–00 16 – 30 2
6840372–7 72–60–00 15 – 35 1
72–60–00 16 – 31 1
6840380–78 72–60–00 7 – 2 1
72–60–00 8 – 2 1
6840380–98 72–60–00 5 – 10 1
72–60–00 6 – 10 1
6840406 72–50–00 4 – 23 1
KITS 1 – 15 1
6840407 72–50–00 3 – 33 1
KITS 1 – 15 1
6840420 72–60–00 9 – 42 1
6840421–1 72–60–00 15 – 11 1
72–60–00 16 – 9 1
6840421–2 72–60–00 15 – 11 AR
72–60–00 16 – 9 AR
6840421–3 72–60–00 15 – 11 AR
72–60–00 16 – 9 AR
6840476 72–50–00 2 – 6 1
6840523 72–60–00 9 – 11 ALT
6840634–12 72–05–00 2 – 5 1
6841676 72–50–00 3 – 10 1
KITS 1 – 15 1
6841729–021 72–60–00 13 – 8 6
6841729–022 72–60–00 13 – 8 AR
6841729–023 72–60–00 13 – 8 AR
6841729–024 72–60–00 13 – 8 AR
6841729–025 72–60–00 13 – 8 AR
6842067 72–60–00 1 – 35 ALT
72–60–00 1 – 46 ALT
72–60–00 2 – 33 ALT
72–60–00 2 – 44 ALT
NUMERICAL INDEX
NUMERIC
PAGE 45
DEC 15/01
TOTAL
6842067 72–60–00 3 – 28 ALT

72–60–00 3 – 39 ALT
72–60–00 5 – 4 ALT
72–60–00 5 – 12 ALT
72–60–00 5 – 47 ALT
KITS 1 – 16 ALT
KITS 1 – 17 ALT
6843356–1 72–60–00 15 – 29 5
72–60–00 16 – 27 5
6843356–2 72–60–00 15 – 29 AR
72–60–00 16 – 27 AR
6843356–3 72–60–00 15 – 29 AR
72–60–00 16 – 27 AR
6843356–4 72–60–00 15 – 29 AR
72–60–00 16 – 27 AR
6843356–5 72–60–00 15 – 29 AR
72–60–00 16 – 27 AR
6843358–1 72–60–00 13 – 30 4
72–60–00 14 – 26 4
72–60–00 15 – 30 1
72–60–00 16 – 28 1
NUMERICAL INDEX
NUMERIC
PAGE 46
DEC 15/01
TOTAL
6843358–2 72–60–00 13 – 30 AR
72–60–00 14 – 26 AR
72–60–00 15 – 30 AR
72–60–00 16 – 28 AR
6843358–3 72–60–00 13 – 30 AR
72–60–00 14 – 26 AR
72–60–00 15 – 30 AR
72–60–00 16 – 28 AR
6843358–4 72–60–00 13 – 30 AR
72–60–00 14 – 26 AR
72–60–00 15 – 30 AR
72–60–00 16 – 28 AR
6843358–5 72–60–00 13 – 30 AR
72–60–00 14 – 26 AR
72–60–00 15 – 30 AR
72–60–00 16 – 28 AR
6843386 72–60–00 9 – 16 1
6843618–080 72–60–00 6 – 35 ALT
6843619–86 72–30–00 1 – 45 ALT
72–40–00 1 – 23 ALT
6843623–836 72–30–00 1 – 45 ALT
72–40–00 1 – 23 ALT
6844007 72–60–00 11 – 16 2
72–60–00 12 – 16 1
6844316 72–60–00 1 – 47 4
72–60–00 2 – 45 3
72–60–00 3 – 40 2
72–60–00 4 – 40 4
73–20–00 1 – 9 1
73–21–00 1 – 14 1
73–21–00 2 – 4 1
73–21–00 3 – 5 1
73–21–00 4 – 5 1
75–10–00 1 – 18 1
75–10–00 1 – 27 1
75–10–00 3 – 24 1
6844317 72–60–00 1 – 48 1
72–60–00 2 – 46 3
72–60–00 3 – 41 2
72–60–00 4 – 41 1
KITS 1 – 9 1
6844422 72–50–00 3 – 27 8
72–50–00 4 – 21 8
6845635 72–50–00 1 – 3 1
6845899 72–50–00 2 – 30 2
6848996–1 72–50–00 2 – 22 AR
6848996–2 72–50–00 2 – 23 AR
6848996–3 72–50–00 2 – 24 AR
6848996–4 72–50–00 2 – 25 AR
6848996–5 72–50–00 2 – 26 AR
NUMERICAL INDEX
NUMERIC
PAGE 47
DEC 15/01
TOTAL
6849468–0805 72–30–00 1 – 12 4
72–30–00 1 – 12 5
6849468–0809 72–30–00 1 – 13 1
72–30–00 1 – 13 2
6849500 72–50–00 3 – 34 1
6850314 72–50–00 4 – 5 4
72–50–00 4 – 18 4
6850364–8 72–05–00 2 – 8 1
72–05–00 3 – 8 1
6851354 73–10–00 1 – 1 1
73–10–00 3 – 1 1
73–10–00 4 – 1 1
73–10–00 5 – 1 1
6851501–57 72–30–00 2 – 2 1
KITS 1 – 16 1
6853366 72–50–00 3 – 4 2
6853446 72–60–00 11 – 15 1
6854056 73–20–00 5 – 23 1
74–20–00 1 – 9 1
74–20–00 2 – 10 1
74–20–00 3 – 6 1
74–20–00 4 – 8 1
74–20–00 5 – 7 1
6854086 72–60–00 5 – 41 1
72–60–00 7 – 34 1
6854255 72–40–00 1 – 16 2
6854424 72–60–00 5 – 40 3
72–60–00 5 – 42 1
72–60–00 6 – 45 3
72–60–00 7 – 31 1
72–60–00 7 – 32 1
72–60–00 8 – 29 2
72–60–00 8 – 42 1
72–60–00 8 – 43 1
6854521 72–60–00 7 – 33 2
72–60–00 8 – 41 2
6855319 72–05–00 1 – 13 1
72–05–00 2 – 13 1
72–05–00 3 – 13 1
6855339 72–60–00 1 – 2 1
72–60–00 2 – 2 1
72–60–00 3 – 2 1
72–60–00 4 – 2 1
6855344 72–60–00 11 – 28 1
72–60–00 12 – 29 1
6855369 72–50–00 1 – 35 1
77–20–00 1 – 8 REF
6856089 72–60–00 9 – 11 ALT
6857851 72–50–00 4 – 13 1
6857866 72–00–00 4 – 10 1
NUMERICAL INDEX
NUMERIC
PAGE 48
DEC 15/01
TOTAL
6857866 72–00–00 5 – 10 1
72–00–00 6 – 10 1
6858646 72–60–00 10 – 6 NP
6858691 72–60–00 10 – 5 1
6859073 72–50–00 3 – 25 1
6859431 72–60–00 1 – 38 1
72–60–00 1 – 43 1
72–60–00 2 – 36 1
72–60–00 2 – 41 1
72–60–00 3 – 31 1
72–60–00 3 – 36 1
72–60–00 5 – 3 1
72–60–00 5 – 45 2
72–60–00 7 – 25 1
6859432 72–60–00 1 – 35 1
72–60–00 1 – 46 2
72–60–00 2 – 33 1
72–60–00 2 – 44 2
72–60–00 3 – 28 1
72–60–00 3 – 39 2
72–60–00 5 – 4 1
72–60–00 5 – 12 1
72–60–00 5 – 47 1
6859503–8 72–60–00 6 – 35 ALT
6859509–01 72–30–00 1 – 42 6
72–30–00 1 – 45 12
72–40–00 1 – 23 12
6859510–01 72–30–00 1 – 42 ALT
72–30–00 1 – 45 ALT
72–40–00 1 – 23 ALT
6859511–01 72–30–00 1 – 42 ALT
72–30–00 1 – 45 ALT
72–40–00 1 – 23 ALT
6859822 72–05–00 2 – 21 2
72–05–00 3 – 21 2
6859823 72–05–00 1 – 17 1
72–05–00 2 – 17 1
72–05–00 3 – 17 1
72–05–00 4 – 14 1
6859824 72–05–00 1 – 23 1
6861980 73–21–00 5 – 24 AR
73–21–00 6 – 26 AR
73–21–00 7 – 24 AR
73–21–00 8 – 25 AR
6864045–02 72–00–00 4 – 4 1
72–00–00 4 – 8 1
72–00–00 5 – 4 1
72–00–00 5 – 8 1
72–00–00 6 – 4 1
72–00–00 6 – 8 1
NUMERICAL INDEX
NUMERIC
PAGE 49
DEC 15/01
TOTAL
6864045–02 73–20–00 1 – 8 2
73–20–00 1 – 31 2
73–20–00 2 – 9 1
73–20–00 2 – 24 2
73–20–00 4 – 9 1
73–20–00 4 – 32 2
75–10–00 1 – 18 1
75–10–00 1 – 23 1
75–10–00 1 – 24 3
75–10–00 1 – 25 2
75–10–00 3 – 21 3
75–10–00 3 – 22 3
6864045–06 72–00–00 4 – 7 2
72–00–00 4 – 9 1
72–00–00 5 – 7 2
72–00–00 5 – 9 1
72–00–00 6 – 7 2
72–00–00 6 – 9 1
6864046–02 72–00–00 4 – 4 1
72–00–00 4 – 8 1
72–00–00 5 – 4 1
72–00–00 5 – 8 1
72–00–00 6 – 4 1
72–00–00 6 – 8 1
73–20–00 1 – 8 2
73–20–00 1 – 31 2
73–20–00 2 – 9 1
73–20–00 2 – 24 2
73–20–00 4 – 9 1
73–20–00 4 – 32 2
75–10–00 1 – 18 1
75–10–00 1 – 23 1
75–10–00 1 – 24 3
75–10–00 1 – 25 2
75–10–00 3 – 21 3
75–10–00 3 – 22 3
6864046–06 72–00–00 4 – 7 2
72–00–00 4 – 9 1
72–00–00 5 – 7 2
72–00–00 5 – 9 1
72–00–00 6 – 7 2
72–00–00 6 – 9 1
6864061–04 72–00–00 4 – 4 1
72–00–00 5 – 4 1
72–00–00 6 – 4 1
75–10–00 1 – 18 1
75–10–00 1 – 24 3
75–10–00 3 – 22 3
6864061–08 72–00–00 4 – 9 1
72–00–00 5 – 9 1
NUMERICAL INDEX
NUMERIC
PAGE 50
DEC 15/01
TOTAL
6864061–08 72–00–00 6 – 9 1
73–20–00 1 – 8 2
73–20–00 1 – 31 2
73–20–00 2 – 9 1
73–20–00 2 – 24 2
73–20–00 4 – 9 1
73–20–00 4 – 32 2
75–10–00 1 – 23 1
75–10–00 1 – 25 2
75–10–00 3 – 21 3
6864061–12 72–00–00 4 – 7 2
72–00–00 4 – 8 1
72–00–00 5 – 7 2
72–00–00 5 – 8 1
72–00–00 6 – 7 2
72–00–00 6 – 8 1
6866246 72–05–00 1 – 35 1
72–05–00 2 – 28 1
72–05–00 3 – 29 1
72–05–00 4 – 27 1
6866501 73–21–00 1 – 32 6
KITS 1 – 1 6
KITS 1 – 2 6
KITS 1 – 3 6
6869431 72–05–00 1 – 40 2
72–05–00 2 – 33 2
72–05–00 3 – 40 2
6870031 72–50–00 4 – 13 1
6870032 72–60–00 9 – 11 1
6870796 72–50–00 2 – 27 1
6870885 74–10–00 1 – 1 2
74–10–00 2 – 1 1
74–10–00 3 – 1 1
74–10–00 4 – 1 1
6870891 74–10–00 1 – 1 ALT
74–10–00 2 – 1 ALT
74–10–00 3 – 1 ALT
74–10–00 4 – 1 ALT
6870927 72–60–00 12 – 15 1
6871051–05 72–00–00 1 – 42 ALT
72–00–00 2 – 42 ALT
72–00–00 3 – 42 ALT
6871060 KITS 1 – 6 ALT
6871062 72–50–00 3 – 24 ALT
72–50–00 4 – 20 1
72–60–00 5 – 34 ALT
72–60–00 6 – 39 ALT
KITS 1 – 8 ALT
6871076–4 73–20–00 4 – 25 5
6871162 72–30–00 2 – 1 AR
NUMERICAL INDEX
NUMERIC
PAGE 51
DEC 15/01
TOTAL
6871505 72–50–00 2 – 18 1
6871508 72–50–00 4 – 31 1
6871534 72–60–00 1 – 20 2
72–60–00 2 – 19 2
6871784 72–60–00 9 – 21 1
6871902 72–30–00 1 – 29 1
6871937 72–00–00 4 – 12 1
72–00–00 5 – 12 1
72–00–00 6 – 12 1
6872013 75–10–00 5 – 41 1
6873658 72–30–00 1 – 7 1
6873659 72–30–00 1 – 8 1
6873741 72–50–00 3 – 24 1
72–50–00 4 – 20 1
6873905 72–30–00 1 – 6 1
6873964 72–30–00 1 – 5 1
6874718 72–50–00 1 – 34 4
77–20–00 1 – 7 REF
6874958 73–20–00 1 – 16 ALT
73–20–00 2 – 10 ALT
73–20–00 4 – 10 ALT
6875004 72–50–00 3 – 24 ALT
72–50–00 4 – 20 ALT
6875047 72–30–00 1 – 24 1
6875224 73–10–00 1 – 24 1
73–10–00 2 – 1 1
73–10–00 4 – 2 2
73–10–00 5 – 2 1
6875350 72–50–00 4 – 6 1
72–50–00 4 – 19 1
KITS 1 – 15 1
6875491 72–50–00 2 – 28 1
6875709 73–20–00 3 – 11 1
73–20–00 6 – 11 1
KITS 1 – 4 1
6875726 73–20–00 1 – 16 1
73–20–00 2 – 10 1
73–20–00 4 – 10 1
6876021 72–30–00 1 – 39 30
6876026–158 72–50–00 2 – 29 ALT
KITS 1 – 16 ALT
KITS 1 – 17 ALT
6876030–1 72–60–00 15 – 9 6
6876030–2 72–60–00 15 – 9 AR
6876030–3 72–60–00 15 – 9 AR
6876030–4 72–60–00 15 – 9 AR
6876030–5 72–60–00 15 – 9 AR
6876097 72–50–00 3 – 3 3
72–50–00 4 – 8 3
6876097–00 72–50–00 4 – 8 AR
NUMERICAL INDEX
NUMERIC
PAGE 52
DEC 15/01
TOTAL
6876097–01 72–50–00 3 – 3 AR
6876097–02 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
6876097–03 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
6876097–04 72–50–00 3 – 3 AR
72–50–00 4 – 8 AR
6876315 72–30–00 1 – 21 1
6876578 72–50–00 4 – 15 1
6876600 72–30–00 1 – 26 1
6876741 72–30–00 2 – 14 48
6876919 72–50–00 4 – 11 1
6878446 72–30–00 1 – 23 1
6878447 72–30–00 1 – 22 1
6879880E123C KITS 1 – 11 1
6879880E167F270 KITS 1 – 11 1
6886430E070 73–10–00 5 – 12 1
6886430E070A 73–20–00 4 – 21 1
6886430E087A 73–10–00 4 – 10 1
73–10–00 5 – 12 ALT
6886430E150C KITS 1 – 9 1
6886437 72–60–00 10 – 4 1
6887099–1 72–60–00 9 – 26 2
6887099–2 72–60–00 9 – 26 AR
6887099–3 72–60–00 9 – 26 AR
6887139 72–60–00 12 – 30 2
6887619 72–30–00 1 – 31 1
6888540 72–60–00 1 – 39 ALT
72–60–00 1 – 41 ALT
72–60–00 2 – 37 ALT
72–60–00 2 – 39 ALT
72–60–00 3 – 32 ALT
72–60–00 3 – 34 ALT
72–60–00 4 – 32 1
72–60–00 4 – 34 2
6888602 72–50–00 4 – 14 1
6888621 72–60–00 5 – 7 1
72–60–00 6 – 7 1
6889069 72–50–00 2 – 16 1
6889071 72–50–00 2 – 15 1
6889076 72–50–00 3 – 9 1
6889096 72–40–00 1 – 14A 2
72–40–00 1 – 14 4
KITS 1 – 15 4
6889140–04 73–21–00 5 – 16 AR
73–21–00 6 – 17 AR
73–21–00 7 – 16 AR
73–21–00 8 – 17 AR
NUMERICAL INDEX
NUMERIC
PAGE 53
DEC 15/01
TOTAL
6889140–05 73–21–00 5 – 17 AR
73–21–00 6 – 18 AR
73–21–00 8 – 18 AR
6889140–06 73–21–00 5 – 18 AR
73–21–00 6 – 19 AR
73–21–00 7 – 18 AR
73–21–00 8 – 19 AR
6889140–07 73–21–00 5 – 19 AR
73–21–00 6 – 20 AR
73–21–00 7 – 19 AR
73–21–00 8 – 20 AR
6889140–08 73–21–00 5 – 20 AR
73–21–00 6 – 21 AR
73–21–00 7 – 20 AR
73–21–00 8 – 21 AR
6889140–09 73–21–00 5 – 21 AR
73–21–00 6 – 22 AR
73–21–00 7 – 21 AR
73–21–00 8 – 22 AR
6889150 72–60–00 1 – 36 1
72–60–00 1 – 44 1
72–60–00 2 – 34 1
72–60–00 2 – 42 1
72–60–00 3 – 29 1
72–60–00 3 – 37 1
72–60–00 4 – 29 1
72–60–00 4 – 37 1
6889157 72–60–00 5 – 1 1
72–60–00 6 – 1 1
6889158 72–60–00 7 – 7 1
72–60–00 8 – 7 1
6889160 72–60–00 7 – 5 1
72–60–00 8 – 5 1
6889161 72–60–00 7 – 14 1
72–60–00 8 – 14 1
6889162 72–60–00 7 – 9 1
72–60–00 8 – 9 1
6889163 72–60–00 7 – 8 1
72–60–00 8 – 8 1
6889164 72–60–00 7 – 3 1
72–60–00 7 – 3 1
72–60–00 8 – 3 1
6889167 72–60–00 11 – 13 1
6889168 72–60–00 11 – 17 1
72–60–00 12 – 18 1
6889169 72–60–00 11 – 12 1
6889172–1 72–60–00 11 – 7 1
72–60–00 12 – 7 1
72–60–00 13 – 26 2
72–60–00 14 – 22 2
NUMERICAL INDEX
NUMERIC
PAGE 54
DEC 15/01
TOTAL
6889172–2 72–60–00 11 – 7 AR
72–60–00 12 – 7 AR
72–60–00 13 – 26 AR
72–60–00 14 – 22 AR
6889172–3 72–60–00 11 – 7 AR
72–60–00 12 – 7 AR
72–60–00 13 – 26 AR
72–60–00 14 – 22 AR
6889173 72–60–00 10 – 17 1
6889175 72–60–00 10 – 15 1
6889176 72–60–00 10 – 22 3
6889177 72–60–00 9 – 30 1
6889178 72–60–00 9 – 31 1
6889181 72–60–00 9 – 45 3
6889182–1 72–60–00 13 – 32 1
6889182–2 72–60–00 13 – 32 AR
6889182–3 72–60–00 13 – 32 AR
6889185 72–60–00 9 – 47 1
72–60–00 10 – 19 1
6889191 72–60–00 5 – 24 1
72–60–00 6 – 22 1
6889193 72–60–00 5 – 22 1
72–60–00 6 – 20 1
6889196 72–60–00 5 – 8 1
72–60–00 6 – 8 1
6889197 72–60–00 5 – 6 1
72–60–00 6 – 6 1
6889198 72–60–00 5 – 13 1
72–60–00 6 – 13 1
6889199 72–60–00 10 – 11 1
6889300 72–60–00 7 – 28 1
72–60–00 8 – 26 1
6889312 72–60–00 5 – 48 1
6889314–1 72–60–00 13 – 24 3
72–60–00 14 – 20 3
6889314–2 72–60–00 13 – 24 AR
72–60–00 14 – 20 AR
6889314–3 72–60–00 13 – 24 AR
72–60–00 14 – 20 AR
6889315–1 72–60–00 15 – 33 1
6889315–2 72–60–00 15 – 33 AR
6889315–3 72–60–00 15 – 33 AR
6889316–1 72–60–00 13 – 28 1
72–60–00 14 – 24 1
6889316–2 72–60–00 13 – 28 AR
72–60–00 14 – 24 AR
6889316–3 72–60–00 13 – 28 AR
72–60–00 14 – 24 AR
6889318 72–50–00 2 – 19 1
6889319 72–50–00 2 – 20 1
NUMERICAL INDEX
NUMERIC
PAGE 55
DEC 15/01
TOTAL
6889320 72–50–00 4 – 30 1
6889321 72–60–00 5 – 39 2
6889326 72–60–00 5 – 31 1
6889332 72–60–00 1 – 39 1
72–60–00 1 – 41 2
72–60–00 2 – 37 1
72–60–00 2 – 39 2
72–60–00 3 – 32 1
72–60–00 3 – 34 2
6889333 72–60–00 5 – 9 1
6889334 72–60–00 1 – 36 1
72–60–00 1 – 44 1
72–60–00 2 – 34 1
72–60–00 2 – 42 1
72–60–00 3 – 29 1
72–60–00 3 – 37 1
72–60–00 5 – 46 1
6889336 72–60–00 7 – 1 1
72–60–00 8 – 1 1
6889337 72–60–00 7 – 27 1
6889347 72–50–00 2 – 17 2
KITS 1 – 15 2
KITS 1 – 17 2
6889351–1 72–30–00 2 – 27 1
6889351–2 72–30–00 2 – 27 AR
6889351–3 72–30–00 2 – 27 AR
6889351–4 72–30–00 2 – 27 AR
6889351–5 72–30–00 2 – 27 AR
6889351–6 72–30–00 2 – 27 AR
6889352 72–30–00 1 – 2 1
6890000 72–00–00 1 – 1 1
6890470–08 72–50–00 1 – 16A ALT
6890470–3 72–00–00 1 – 38 ALT
72–00–00 2 – 38 ALT
72–00–00 3 – 38 ALT
72–50–00 1 – 16 ALT
72–50–00 3 – 4A ALT
6890472 72–30–00 1 – 24 ALT
6890500 72–60–00 2 – 50 1
6890531 72–50–00 3 – 7 1
6890578 73–20–00 1 – 4 1
73–20–00 2 – 4 1
73–20–00 4 – 4 1
73–20–00 5 – 3 1
6890579 73–20–00 2 – 1 1
6890580 73–20–00 1 – 2 1
73–20–00 2 – 2 1
73–20–00 4 – 2 1
NUMERICAL INDEX
NUMERIC
PAGE 56
DEC 15/01
TOTAL
6890580 73–20–00 5 – 2 1
6890581 73–20–00 1 – 3 1
73–20–00 2 – 3 1
6890583 73–20–00 1 – 32 1
73–20–00 2 – 25 1
73–20–00 4 – 33 1
6890584 73–20–00 1 – 27 1
73–20–00 2 – 20 1
73–20–00 4 – 20 1
6890586 73–20–00 1 – 33 1
73–20–00 2 – 26 1
73–20–00 4 – 34 1
73–20–00 5 – 28 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
6890587 73–20–00 1 – 21 1
6891554 72–00–00 1 – 12 1
72–00–00 2 – 12 1
72–00–00 3 – 12 1
6891587 72–00–00 1 – 41 1
72–00–00 2 – 41 1
72–00–00 3 – 41 1
6891606 72–60–00 11 – 29 1
6891634 73–20–00 1 – 25 1
73–20–00 2 – 19 1
73–20–00 4 – 19 1
73–20–00 5 – 27 1
KITS 1 – 1 1
KITS 1 – 2 1
KITS 1 – 3 1
6891639 73–10–00 1 – 15 1
6891954 73–10–00 1 – 19 1
73–10–00 2 – 10 1
73–10–00 3 – 24 1
73–10–00 4 – 32 1
6891966 73–20–00 1 – 20 ALT
73–20–00 2 – 14C ALT
73–20–00 4 – 14C ALT
73–20–00 5 – 17 ALT
6891980–250 72–60–00 2 – 14 AR
6891980–375 72–60–00 1 – 14A AR
72–60–00 2 – 13A AR
72–60–00 3 – 13A AR
72–60–00 4 – 13A AR
6891980–500 72–60–00 1 – 15 AR
72–60–00 3 – 14 AR
72–60–00 4 – 14 AR
6892073 72–60–00 5 – 28 1
6892099 72–00–00 1 – 35 1
NUMERICAL INDEX
NUMERIC
PAGE 57
DEC 15/01
TOTAL
6892099 72–00–00 2 – 35 1
72–00–00 3 – 35 1
6892285 72–60–00 1 – 45 1
72–60–00 2 – 43 1
72–60–00 3 – 38 1
72–60–00 4 – 38 1
6892287–1 72–60–00 15 – 31 1
72–60–00 16 – 29 1
6892287–2 72–60–00 15 – 31 AR
72–60–00 16 – 29 AR
6892287–3 72–60–00 15 – 31 AR
72–60–00 16 – 29 AR
6892312 72–30–00 1 – 36 AR
6892313 72–40–00 1 – 5 2
6892314 72–40–00 1 – 6 2
6892764 72–50–00 3 – 8 1
6892791 73–20–00 7 – 1 1
6892821 72–00–00 1 – 44 1
72–00–00 2 – 44 1
72–00–00 3 – 44 1
6892824 72–00–00 1 – 8 1
72–00–00 2 – 8 1
72–00–00 3 – 8 1
6892826 72–00–00 1 – 47 1
72–00–00 2 – 47 1
72–00–00 3 – 47 1
6892828 72–50–00 2 – 31 1
6892832 72–50–00 4 – 16 1
6892834 72–50–00 4 – 17 1
6892836 72–50–00 2 – 1 1
6892838 72–60–00 5 – 17 1
72–60–00 6 – 16 1
6892843 72–00–00 4 – 1 1
6892846 72–00–00 4 – 3 1
72–00–00 5 – 3 1
72–00–00 6 – 3 1
6893002 72–30–00 2 – 16 1
6893008 72–30–00 2 – 21 1
6893011 72–30–00 2 – 19 1
6893013 72–00–00 1 – 2 1
6893014 72–30–00 2 – 7 1
6893015–1 72–30–00 2 – 3 1
6893015–1.5 72–30–00 2 – 3 AR
6893015–2 72–30–00 2 – 3 AR
6893015–2.5 72–30–00 2 – 3 AR
6893015–3 72–30–00 2 – 3 AR
6893015–3.5 72–30–00 2 – 3 AR
6893015–4 72–30–00 2 – 3 AR
6893015–4.5 72–30–00 2 – 3 AR
6893015–5 72–30–00 2 – 3 AR
NUMERICAL INDEX
NUMERIC
PAGE 58
DEC 15/01
TOTAL
6893029 72–00–00 1 – 48 1
72–00–00 2 – 48 1
72–00–00 3 – 48 1
6893030 72–30–00 1 – 18 1
6893031 72–30–00 2 – 23 1
6893071 72–60–00 7 – 6 1
72–60–00 8 – 6 1
6893072 72–00–00 4 – 11 1
72–00–00 5 – 11 1
72–00–00 6 – 11 1
6893073 73–20–00 1 – 28 1
73–20–00 2 – 21 1
73–20–00 4 – 29 1
73–20–00 5 – 35 1
6893075 72–50–00 3 – 1 1
6893077 72–50–00 1 – 28 1
77–20–00 1 – 1 REF
6893282 74–20–00 1 – 1 1
74–20–00 3 – 1 1
74–20–00 4 – 1 1
74–20–00 5 – 1 1
6893283 74–20–00 1 – 2 1
74–20–00 2 – 1 1
74–20–00 4 – 2 1
6893297 72–05–00 1 – 1 1
6893478 75–10–00 5 – 14 1
75–10–00 5 – 36 1
6893479 75–10–00 5 – 12 1
75–10–00 5 – 34 1
6893480 75–10–00 5 – 11 1
75–10–00 5 – 33 1
6893481 75–10–00 5 – 10 1
75–10–00 5 – 32 1
6893483 75–10–00 5 – 27 1
6893484 75–10–00 5 – 28 1
6893485 75–10–00 5 – 26 1
6893488 75–10–00 5 – 29 1
6893603 72–50–00 3 – 30 1
KITS 1 – 15 1
6893613 72–60–00 7 – 3 1
6893614 72–30–00 2 – 17 1
6893634 72–60–00 1 – 30 2
72–60–00 3 – 23 2
72–60–00 4 – 23 2
6893636 72–60–00 1 – 53 1
72–60–00 2 – 49 1
72–60–00 3 – 44 1
72–60–00 4 – 45 1
6893641 72–00–00 1 – 37 1
72–00–00 2 – 37 1
NUMERICAL INDEX
NUMERIC
PAGE 59
DEC 15/01
TOTAL
6893641 72–00–00 3 – 37 1
6893647 72–50–00 4 – 36 1
6893648 72–00–00 1 – 13 1
72–00–00 2 – 13 1
72–00–00 3 – 13 1
6893650 72–00–00 1 – 19 1
72–00–00 2 – 19 1
72–00–00 3 – 19 1
6893654 72–60–00 11 – 1 1
6893656 72–60–00 11 – 2 1
72–60–00 11 – 2 1
6893657 72–60–00 11 – 22 1
6893658 72–60–00 11 – 8 1
6893659 72–60–00 11 – 28 1
6893662 72–60–00 11 – 10 1
6893663 72–60–00 10 – 22 3
6893664 72–60–00 10 – 7 NP
6893665 72–60–00 10 – 5 1
6893668 72–60–00 10 – 8 1
6893669 72–60–00 10 – 1 1
6893672 72–60–00 5 – 37 1
72–60–00 6 – 42 1
6893673 72–60–00 5 – 15 1
6893676 72–50–00 2 – 32 AR
6893698 72–05–00 1 – 29 1
72–05–00 2 – 25 1
72–05–00 3 – 26 1
72–05–00 4 – 21 1
6894055 75–10–00 1 – 11 1
6894058 75–10–00 1 – 9 1
75–10–00 2 – 9 1
75–10–00 3 – 9 1
75–10–00 4 – 9 1
6894063 75–10–00 6 – 1 1
6894075 72–05–00 1 – 32 1
72–05–00 4 – 24 1
6894080 73–10–00 2 – 6 1
6894110 72–60–00 1 – 22 1
72–60–00 2 – 21 1
6894189 72–50–00 1 – 13 1
6894611 73–21–00 1 – 25 1
6894627 74–10–00 1 – 7 1
74–10–00 2 – 6 1
74–10–00 3 – 6 1
74–10–00 4 – 6 1
6895007 72–60–00 5 – 23 1
72–60–00 6 – 21 1
72–60–00 7 – 15 1
72–60–00 8 – 15 1
6895072 72–60–00 1 – 5 1
NUMERICAL INDEX
NUMERIC
PAGE 60
DEC 15/01
TOTAL
6895079 72–60–00 13 – 1 1
6895090 72–60–00 9 – 13 1
6895093 72–60–00 9 – 25 1
6895094 72–60–00 9 – 27 1
6895096 72–60–00 9 – 4 1
6895097 72–60–00 9 – 1 1
6895180 75–10–00 5 – 38 1
6895183 75–10–00 5 – 37 1
6895551 75–10–00 1 – 10 1
75–10–00 2 – 10 1
75–10–00 3 – 10 1
75–10–00 4 – 10 1
6895573 74–10–00 1 – 1 ALT
74–10–00 2 – 1 ALT
74–10–00 3 – 1 ALT
74–10–00 4 – 1 ALT
6895800 72–40–00 1 – 1 2
6895804 72–30–00 1 – 43 2
6895805 72–40–00 1 – 9 2
6895806–1 72–60–00 13 – 21 1
6895806–2 72–60–00 13 – 21 AR
6895806–3 72–60–00 13 – 21 AR
6895831 73–20–00 1 – 1 1
6895832 73–10–00 1 – 6 1
6896021 72–30–00 2 – 8 1
6896025 72–30–00 2 – 11 1
6896058 72–30–00 2 – 12 1
6896094 72–60–00 15 – 1 1
6896098 72–50–00 4 – 15 1
6896194 75–10–00 5 – 39 1
6896301 74–20–00 2 – 29 1
74–20–00 3 – 22 1
6896344 73–10–00 1 – 16 1
73–10–00 3 – 21 1
73–10–00 4 – 29 1
73–10–00 5 – 34 1
6896407 72–30–00 1 – 10 1
6896408 72–50–00 3 – 23 1
KITS 1 – 15 1
6896449 72–00–00 4 – 2 1
72–00–00 5 – 2 1
72–00–00 6 – 2 1
6896451 72–00–00 4 – 5 1
72–00–00 5 – 5 1
72–00–00 6 – 5 1
6896458 72–60–00 9 – 40 1
6896481 72–50–00 3 – 35 1
6896482 72–60–00 1 – 26 2
72–60–00 2 – 25 2
6896483–1 72–60–00 1 – 23 2
NUMERICAL INDEX
NUMERIC
PAGE 61
DEC 15/01
TOTAL
6896483–1 72–60–00 2 – 22 2
6896483–2 72–60–00 1 – 23 AR
72–60–00 2 – 22 AR
6896483–3 72–60–00 1 – 23 AR
72–60–00 2 – 22 AR
6896804 73–20–00 1 – 19 ALT
73–20–00 2 – 14B ALT
73–20–00 4 – 14B ALT
6896809 73–10–00 7 – 1 1
6896810 73–10–00 1 – 16 ALT
73–10–00 3 – 21 ALT
73–10–00 4 – 29 ALT
73–10–00 5 – 34 ALT
6896816 73–21–00 1 – 1 1
6896822 73–10–00 2 – 7 ALT
6896845 73–10–00 7 – 3 1
6896856 72–60–00 9 – 33 1
6896872 72–60–00 9 – 9 1
6896875 72–50–00 3 – 35 1
6896888 72–30–00 1 – 37 1
6896890 72–30–00 2 – 26 1
6896895 72–50–00 2 – 15 1
6897266 72–05–00 1 – 44 1
72–05–00 2 – 37 1
72–05–00 3 – 44 1
72–05–00 4 – 35 1
6897953–10 72–05–00 2 – 39 1
72–05–00 4 – 43 1
6897953–16 72–05–00 1 – 9 1
72–05–00 3 – 9 1
6897953–8 72–05–00 1 – 46 ALT
6897991–000 72–60–00 1 – 16 AR
72–60–00 2 – 15 AR
72–60–00 3 – 15 AR
72–60–00 4 – 15 AR
6898512 75–10–00 1 – 12 1
6898513 75–10–00 1 – 5 1
6898517 73–10–00 2 – 11 1
6898540 72–60–00 1 – 9 1
72–60–00 3 – 49 1
6898558 72–60–00 5 – 19 1
72–60–00 6 – 17 1
6898560 75–10–00 1 – 2 1
75–10–00 2 – 2 1
75–10–00 3 – 2 1
75–10–00 4 – 2 1
6898564 72–50–00 3 – 16 1
6898590 72–60–00 1 – 40 1
72–60–00 2 – 38 1
72–60–00 3 – 33 1
NUMERICAL INDEX
NUMERIC
PAGE 62
DEC 15/01
TOTAL
6898605 72–40–00 1 – 8 4
6898606 72–30–00 2 – 16 1
6898607 72–30–00 1 – 26 1
6898611 72–30–00 2 – 8 1
6898613 72–30–00 1 – 14 1
6898642 72–60–00 1 – 34 1
72–60–00 2 – 32 1
72–60–00 3 – 27 1
72–60–00 4 – 27 1
6898652 72–60–00 1 – 37 1
6898653 72–50–00 3 – 15 1
6898657 72–40–00 1 – 13 2
KITS 1 – 15 2
KITS 1 – 17 2
6898663 72–50–00 3 – 12 1
6898675 72–50–00 3 – 13 1
6898677 72–50–00 3 – 26 1
6898678 72–50–00 3 – 14 1
6898679 72–50–00 3 – 6 1
6898683 72–50–00 3 – 5 1
6898685 72–50–00 1 – 1 1
6898687–1 72–50–00 4 – 11 AR
6898687–2 72–50–00 4 – 11 AR
6898688 72–50–00 4 – 1 1
6898693 72–50–00 3 – 15 1
6898694 72–50–00 3 – 11 1
6898707 72–60–00 7 – 11 1
72–60–00 8 – 11 1
6898711 72–30–00 2 – 13 1
6898721 72–50–00 4 – 37 1
6898722 72–30–00 1 – 41 1
6898724 73–20–00 1 – 5 1
6898742 72–50–00 3 – 18 1
6898748 72–30–00 1 – 16 1
6898761 72–00–00 1 – 29 1
72–00–00 2 – 29 1
72–00–00 3 – 29 1
6898762 72–00–00 1 – 31 1
72–00–00 2 – 31 1
72–00–00 3 – 31 1
6898764 72–50–00 3 – 18 ALT
6898781 72–50–00 2 – 14 1
6898785 72–60–00 5 – 26 1
6898808 72–00–00 1 – 22 1
72–00–00 2 – 22 1
72–00–00 3 – 22 1
6898809 72–60–00 10 – 3 2
6898824 72–30–00 1 – 15 1
6898825 72–00–00 4 – 6 1
72–00–00 5 – 6 1
NUMERICAL INDEX
NUMERIC
PAGE 63
DEC 15/01
TOTAL
6898825 72–00–00 6 – 6 1
6898829 72–60–00 5 – 44 1
6898830 72–60–00 10 – 2 1
6898835 72–60–00 5 – 43 1
6898836 72–60–00 10 – 8 1
6898837 72–50–00 3 – 22 1
6898839 72–00–00 4 – 12 1
72–00–00 5 – 12 1
72–00–00 6 – 12 1
6898840 72–60–00 10 – 1 1
6898841 72–50–00 4 – 24 1
6898867 73–20–00 1 – 65 1
73–20–00 2 – 48 1
6898872 72–60–00 1 – 10 1
6898892 73–20–00 1 – 65 1
73–20–00 2 – 48 1
6898899 73–20–00 1 – 43 1
6898906 72–40–00 1 – 18 1
6898911 72–50–00 4 – 24 1
6898930 73–10–00 1 – 22 AR
73–10–00 2 – 13 AR
73–10–00 3 – 27 AR
73–10–00 4 – 35 AR
73–10–00 5 – 40 AR
6898933 73–21–00 2 – 9 1
6898945 72–50–00 3 – 28 1
6898947 72–60–00 9 – 9 1
6898954 72–60–00 9 – 9 1
6898963 72–50–00 3 – 15 1
6898966 72–30–00 2 – 8 1
6898976 72–50–00 2 – 11 1
6898979 75–10–00 1 – 1 1
75–10–00 2 – 1 1
75–10–00 3 – 1 1
75–10–00 4 – 1 1
6898980 72–60–00 1 – 42 1
6898981 72–60–00 1 – 42 1
72–60–00 2 – 40 1
72–60–00 3 – 35 1
72–60–00 4 – 35 1
6898984 72–60–00 5 – 5 1
6898985 72–60–00 1 – 37 1
72–60–00 2 – 35 1
72–60–00 3 – 30 1
6898986 72–30–00 1 – 7 1
6898987 72–30–00 1 – 8 1
6898989 72–30–00 1 – 5 1
6898993 72–60–00 1 – 37 1
72–60–00 2 – 35 1
72–60–00 3 – 30 1
NUMERICAL INDEX
NUMERIC
PAGE 64
DEC 15/01
TOTAL
6899001 73–10–00 6 – 1 1
6899049 75–10–00 5 – 4 1
6899050 75–10–00 5 – 35 1
6899051 75–10–00 5 – 13 1
6899059 75–10–00 1 – 12 1
75–10–00 2 – 12 1
75–10–00 3 – 12 1
75–10–00 4 – 12 1
6899061 75–10–00 1 – 11 1
75–10–00 2 – 11 1
75–10–00 3 – 11 1
75–10–00 4 – 11 1
6899068 73–20–00 1 – 43 ALT
6899076 75–10–00 5 – 5 ALT
6899078 75–10–00 5 – 23 1
6899079 75–10–00 5 – 22 1
6899080 75–10–00 1 – 5 1
75–10–00 2 – 5 1
75–10–00 3 – 5 1
75–10–00 4 – 5 1
6899081 72–40–00 1 – 27 1
6899084 74–20–00 1 – 19 2
74–20–00 2 – 26 1
74–20–00 2 – 27 1
74–20–00 3 – 21 1
74–20–00 4 – 25 2
74–20–00 5 – 18 1
6899085 74–20–00 1 – 19 ALT
74–20–00 2 – 26 ALT
74–20–00 2 – 27 ALT
74–20–00 3 – 21 ALT
74–20–00 4 – 25 ALT
74–20–00 5 – 18 ALT
6899088 75–10–00 5 – 3 1
6899093 74–10–00 1 – 1 ALT
74–10–00 2 – 1 ALT
74–10–00 3 – 1 ALT
74–10–00 4 – 1 ALT
6899096 75–10–00 5 – 3 ALT
6899098 75–10–00 5 – 30 1
6899102 75–10–00 5 – 5 1
6899103 75–10–00 5 – 27 1
6899114 75–10–00 5 – 11 1
75–10–00 5 – 33 1
6899130 75–10–00 5 – 5 ALT
6899131 75–10–00 5 – 41 1
6899135 75–10–00 5 – 1 1
6899136 75–10–00 5 – 1 1
6899144 72–60–00 2 – 9 1
6899145 72–60–00 1 – 10 1
NUMERICAL INDEX
NUMERIC
PAGE 65
DEC 15/01
TOTAL
6899145 72–60–00 3 – 9 1
6899149 73–21–00 1 – 24 1
73–21–00 3 – 9 1
73–21–00 4 – 9 1
6899151 72–05–00 1 – 31 1
75–10–00 1 – 45 1
6899153 72–50–00 3 – 31 1
6899156 72–60–00 5 – 5 1
6899159 75–10–00 1 – 17 1
6899166 72–50–00 1 – 13 1
6899167 72–00–00 1 – 37 1
72–00–00 2 – 37 1
72–00–00 3 – 37 1
6899168 72–00–00 1 – 41 1
72–00–00 2 – 41 1
72–00–00 3 – 41 1
6899185 72–00–00 1 – 21 1
72–00–00 2 – 21 1
72–00–00 3 – 21 1
6899191 73–10–00 1 – 7 1
6899202 KITS 1 – 11 1
6899208 73–20–00 1 – 3 1
73–20–00 4 – 3 1
73–20–00 5 – 36 1
6899215 72–40–00 1 – 24 2
6899216 72–40–00 1 – 25 1
6899217 72–40–00 1 – 26 3
6899233 73–20–00 2 – 5 1
73–20–00 4 – 5 1
6899235 72–50–00 1 – 13 1
6899237 72–40–00 1 – 18 1
6899238 KITS 1 – 11 1
6899245 72–30–00 2 – 26 1
6899249 73–20–00 1 – 5 1
73–20–00 1 – 10 1
73–20–00 5 – 4 1
6899254 73–20–00 7 – 1 1
6899259 73–21–00 5 – 1 1
6899265 73–20–00 1 – 43 1
6899267 75–10–00 5 – 3 ALT
6899269 75–10–00 5 – 1 1
6899278 73–10–00 7 – 1 1
6899282–1 75–10–00 5 – 21 2
6899282–10 75–10–00 5 – 21 AR
6899282–11 75–10–00 5 – 21 AR
6899282–12 75–10–00 5 – 21 AR
6899282–13 75–10–00 5 – 21 AR
6899282–14 75–10–00 5 – 21 AR
6899282–15 75–10–00 5 – 21 AR
6899282–16 75–10–00 5 – 21 AR
NUMERICAL INDEX
NUMERIC
PAGE 66
DEC 15/01
TOTAL
6899282–17 75–10–00 5 – 21 AR
6899282–18 75–10–00 5 – 21 AR
6899282–19 75–10–00 5 – 21 AR
6899282–2 75–10–00 5 – 21 AR
6899282–20 75–10–00 5 – 21 AR
6899282–21 75–10–00 5 – 21 AR
6899282–22 75–10–00 5 – 21 AR
6899282–23 75–10–00 5 – 21 AR
6899282–24 75–10–00 5 – 21 AR
6899282–25 75–10–00 5 – 21 AR
6899282–26 75–10–00 5 – 21 AR
6899282–27 75–10–00 5 – 21 AR
6899282–28 75–10–00 5 – 21 AR
6899282–29 75–10–00 5 – 21 AR
6899282–3 75–10–00 5 – 21 AR
6899282–30 75–10–00 5 – 21 AR
6899282–31 75–10–00 5 – 21 AR
6899282–32 75–10–00 5 – 21 AR
6899282–33 75–10–00 5 – 21 AR
6899282–34 75–10–00 5 – 21 AR
6899282–35 75–10–00 5 – 21 AR
6899282–36 75–10–00 5 – 21 AR
6899282–37 75–10–00 5 – 21 AR
6899282–38 75–10–00 5 – 21 AR
6899282–39 75–10–00 5 – 21 AR
6899282–4 75–10–00 5 – 21 AR
6899282–5 75–10–00 5 – 21 AR
6899282–6 75–10–00 5 – 21 AR
6899282–7 75–10–00 5 – 21 AR
6899282–8 75–10–00 5 – 21 AR
6899282–9 75–10–00 5 – 21 AR
6899299 73–20–00 1 – 43 1
6899308 73–20–00 1 – 43 1
6899311 73–21–00 1 – 41 1
73–21–00 3 – 16 1
73–21–00 4 – 16 1
6899324 73–21–00 1 – 25 1
6899353 72–60–00 9 – 40 1
6899354 72–00–00 1 – 34 1
72–00–00 2 – 34 1
72–00–00 3 – 34 1
KITS 1 – 17 1
6899407 72–60–00 9 – 5 1
6899408 73–10–00 1 – 23 AR
73–10–00 2 – 14 AR
73–10–00 3 – 28 AR
73–10–00 4 – 36 AR
73–10–00 5 – 41 AR
6899443 72–50–00 1 – 12 1
69PA017VIT70 72–30–00 1 – 33 1
NUMERICAL INDEX
NUMERIC
PAGE 67
DEC 15/01
TOTAL
85–2582 72–30–00 1 – 32 1
907767 73–10–00 7 – 4 1
911248 73–10–00 7 – 6 1
92133 72–00–00 4 – 27 NP
72–00–00 5 – 27 NP
72–00–00 6 – 27 NP
951394 73–20–00 1 – 47 1
73–20–00 2 – 39B 1
73–20–00 4 – 48B 1
73–20–00 5 – 45 1
951395 73–20–00 1 – 46 1
73–20–00 2 – 39A 1
73–20–00 4 – 48A 1
73–20–00 5 – 44 1
953508–8 73–20–00 1 – 49 2
73–20–00 2 – 39D 2
73–20–00 4 – 48D 2
73–20–00 5 – 47 2
953515–4 73–20–00 1 – 48 1
73–20–00 2 – 39C 1
73–20–00 4 – 48C 1
73–20–00 5 – 46 1
98114 72–00–00 4 – 30 NP
72–00–00 5 – 30 NP
72–00–00 6 – 30 NP
98115 72–00–00 4 – 25 NP
72–00–00 5 – 25 NP
72–00–00 6 – 25 NP
98116 72–00–00 4 – 28 NP
72–00–00 5 – 28 NP
72–00–00 6 – 28 NP
NUMERICAL INDEX
NUMERIC
PAGE 68
DEC 15/01
PART NUMBER HISTORICAL DATA
MIL–C–16173 SB 23057504–01
MIL–D–3464 SB 23057503–16
MIL–L–23699 SB 23057500
MIL–L–6081 SB 23057501
MS9195–04 SB 23003145
MS9372–017 DISC.
MS9387–03 FRO AS3084–03
MS9387–04 FRO AS3084–04
MS9387–05 FRO AS3084–05
MS9387–08 FRO AS3084–08
MS9388–007 FRO AS3085–007
MS9388–010 FRO AS3085–010
MS9388–011 FRO AS3085–011
MS9388–012 FRO AS3085–012
MS9388–013 FRO AS3085–013
MS9388–014 FRO AS3085–014
MS9388–015 FRO AS3085–015
MS9388–016 FRO AS3085–016
MS9388–017 FRO AS3085–017
MS9388–018 FRO AS3085–018
MS9388–019 FRO AS3085–019
MS9388–020 FRO AS3085–020
MS9388–022 FRO AS3085–022
MS9388–024 FRO AS3085–024
MS9388–031 FRO AS3085–031
MS9388–041 FRO AS3085–041
MS9388–111 FRO AS3085–111
MS9388–113 FRO AS3085–113
MS9388–116 FRO AS3085–116
MS9388–122 FRO M83248/1–122
MS9388–126 FRO AS3085–126
MS9388–129 FRO AS3085–129
MS9388–158 FRO AS3085–158
MS9388–159 FRO AS3085–159
MS9388–227 FRO AS3085–227
MS9565–07 SB MS9217–07
MS9565–12 SB MS9217–12
MS9574–07 SB MS9217–07
MS9574–12 SB MS9217–12
MS9705–07 SB MS9217–07
MS9714–07 SB MS9217–07
HISTORICAL PARTS
PAGE 1
SEP 1/98
MS9825–02 FRO 23039030–02

MS9825–03 FRO 23039030–03
MS9825–04 FRO 23039030–04
MS9825–07 FRO 23039030–07
MS9825–09 FRO 23039030–09
MS9825–10 FRO 23039030–10
MS9825–11 FRO 23039030–11
MS9825–20 FRO 23039030–20
NAS813–16Y SB 23030799–16
TTI–1795A SB 23057502
23001921 R&R 23005277, PER CEB 72–3034, 72–3059
23001915 REF CEB 72–3060, SB 6871534, PER CEB–A–72–3098
23001944 REF CEB 72–3036, R&R 23007216, PER CEB 72–3101,
R&R 23031883, PER CEB 72–A–3131
23001958 DISC., PER CEB 72–3059
23001981 DISC.
23002214 R&R 23005729, PER CEB 72–3101
23004214 R&R 23008649, PER CEB 72–3101
23004215 R&R 23005729, PER CEB 72–3101
23004233 REF CEB 72–3038, SB 23032280, PER CEB–A–72–3137,
A–72–3132
23004515 DISC., PER CEB 72–3050
23004535 R&R 23005655, PER CEB 72–3059 , REF CEB 72–3104
23004547 DISC., PER CEB 72–3059
23004548 DISC., PER CEB 72–3020, 72–3059
23005220 SB 23005656
23005650 SB 23005271, PER CEB 72–3059
23005652 SB 23033176 OR 23008586, REF CEB 72–3104, A–72–3098
23005720 DISC.
23005729 SB 23031934, PER CEB–A–72–3131
23007216 R&R 23031857, PER CEB–A–72–3131
23008004 R&R 23031884, PER CEB–A–72–3131, REF CEB 72–3109
23008041 R&R 23031859, PER CEB–A–72–3131
23008099 SB 23064007
23008490 R&R 23031925, PER CEB–A–72–3128
23008519 R&R 23031858, PER CEB–A–72–3131
23008557 FORMERLY RFSE 250–83–8, DISC.
23008589 R&R 23031913, PER CEB–A–72–3128, REF CEB 72–3109
23009663 SB 23064037, REF CEB 72–3158
HISTORICAL PARTS
PAGE 2
NOV 1/00
23009665 SB 23064039
23009666 SB 23064040, REF CEB 72–3138, 72–3199
23030146 SB 23064021
23031283 FRO 23031911
23031470 FRO 23031913
23031472 FRO 23031283
23031857 R&R 23032332, PER CEB–A–72–3131
23031858 R&R 23032334, PER CEB–A–72–3128
23031859 R&R 23032355, PER CEB–A–72–3131
23031862 SERV REIDENT OF 23007216
23031863 R&R 23031858, PER CEB–A–72–3131
23031883 R&R 23031857, PER CEB 72–3101
23031884 R&R 23031858, PER CEB 72–3101, REF CEB 72–3101
23031911 R&R 23031858, PER CEB–A–72–3131
23031912 R&R 23032355, PER CEB–A–72–3131
23031997 R&R 23007213, PER CEB 72–3101
23032948 DISC., PER CEB 72–3178
23033176 SB 23035179
23033176 FRO 23008586
23033178 FRO 23035181
23035179 FRO 23035178
23052393 DISC.
23052955 DISC.
23053325 RFSE 250–90–3 ON –C30
23054642 FORMERLY RFSE 250–90–10
23055459 FORMERLY RFSE 250–90–10
23055460–04 DISC.
23055460–05 DISC.
23056638 FORMERLY RFSE 250–90–10
23056639 FORMERLY RFSE 250–90–10
23057781 FRO 23058112
6749387–02 FRO 23039030–02
6749387–03 FRO 23039030–03
6749387–04 FRO 23039030–04
HISTORICAL PARTS
PAGE 3
DEC 15/01
6749387–07 FRO 23039030–07

6749387–09 FRO 23039030–09
6749387–10 FRO 23039030–10
6749387–11 FRO 23039030–11
6843332–03 FRO AS3084–03
6843332–04 FRO AS3084–04
6843332–05 FRO AS3084–05
6843332–08 FRO AS3084–08
6843333–007 FRO AS3085–007
6843333–010 FRO AS3085–010
6843333–011 FRO AS3085–011
6843333–012 FRO AS3085–012
6843333–013 FRO AS3085–013
6843333–014 FRO AS3085–014
6843333–015 FRO AS3085–015
6843333–016 FRO AS3085–016
6843333–017 FRO AS3085–017
6843333–018 FRO AS3085–018
6843333–019 FRO AS3085–019
6843333–020 FRO AS3085–020
6843333–022 FRO AS3085–022
6843333–024 FRO AS3085–024
6843333–031 FRO AS3085–031
6843333–041 FRO AS3085–041
6843333–111 FRO AS3085–111
6843333–113 FRO AS3085–113
6843333–116 FRO AS3085–116
6843333–122 FRO MS9388–122
6843333–126 FRO AS3085–126
6843333–129 FRO AS3085–129
6843333–158 FRO AS3085–158
6843333–159 FRO AS3085–159
6843333–227 FRO AS3085–227
6889365 SB 23008099, REF CEB 72–3158
6876674 SB 23009665, REF CEB 72–3059, 72–3166
6876676 SB 23009666, REF CEB 72–3101, 72–3199
6889353 SB 23009663, REF CEB 72–3059
HISTORICAL PARTS
PAGE 4
DEC 15/01
TABLE OF CONTENTS
ENGINE
CHAPTER 72
SUBJECT CH–SE–UN FIG.
ENGINE 72–00
TURBOSHAFT AIRCRAFT ENGINE ASSY
(250–C30, –C30S, –C30G, –C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 3
ENGINE LUBE SYSTEM
(250–C30, –C30S, –C30G, –C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 4
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 5
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–00–00 6
ENGINE SHIPPING PARTS
(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–05–00 1

(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–05–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–05–00 3
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–05–00 4
COMPRESSOR ASSY (PART I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–30–00 1
COMPRESSOR ASSY (PART II) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–30–00 2
COMBUSTION SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–40–00 1
TURBINE ASSY (EXTERNAL PART I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–50–00 1
TURBINE ASSY (EXTERNAL PART II) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–50–00 2
TURBINE ASSY (EXHAUST COLLECTOR & POWER TURBINE ROTOR) . . . . . . 72–50–00 3
TURBINE ASSY (POWER TURBINE, GAS PRODUCER SUPPORTS
& TURBINE ROTOR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–50–00 4
72-CONTENTS
PAGE 1
SEP 1/98
TABLE OF CONTENTS
ENGINE
CHAPTER 72
GEARBOX ASSY, POWER & ACCESSORY (COVER)

(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 3
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 4
GEARBOX ASSY, POWER & ACCESSORY
(COVER SEALS & SPUR GEARSHAFTS)
(250–C30, –C30S, –C30P, –C30M, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 5
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 6
GEARBOX ASSY, POWER & ACCESSORY (HOUSING)
(250–C30, –C30S, –C30P, –C30M, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 7
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 8
(FILTER HOUSING & OIL TUBES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 9
GEARBOX ASSY, POWER & ACCESSORY (OIL PUMP) . . . . . . . . . . . . . . . . . . . . . . 72–60–00 10
GEARBOX ASSY, POWER & ACCESSORY (LUBE OIL PUMP ASSY)
P/N 23008457 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 11
P/N 23039794 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 12
GEARBOX ASSY, POWER & ACCESSORY (COVER ASSY)
(250–C30, –C30S, –C30P, –C30M, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 13
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 14
GEARBOX ASSY, POWER & ACCESSORY (HOUSING ASSY)
(250–C30, –C30S, –C30P, –C30M, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 15
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–60–00 16
72-CONTENTS
PAGE 2
SEP 1/98
ENGINE
72-CHAPTER TITLE
PAGE 1
SEP 1/98
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30, –C30S, –C30G, –C30G/2)

FIGURE 1 (SHEET 1 OF 2)
72-00-00
FIGURE 1
PAGE 0
NOV 15/99
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30, –C30S, –C30G, –C30G/2)

72-00-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
FIG-ITEM PART NUMBER NOMENCLATURE EFFECT PER
1234567 CODE ASSY
1 TURBOSHAFT AIRCRAFT ENGINE ASSY

(250–C30, –C30S, –C30G, –C30G/2)
– 1 6890000 ENGINE ASSY, AIRCRAFT, TURBOSHAFT A 1

(R&R 23005290, PER 250 CEB 72–3067)
(REF 250 CEB 72–3158)
– 1 23005290 ENGINE ASSY, AIRCRAFT, TURBOSHAFT AD 1
(REF 250 CEB 72–3158)
(BOEING 250–C30(HU) APPL ONLY)
(REF 250 CEB 72–3158) (FRO 23062052)
– 1 23039781 ENGINE ASSY, AIRCRAFT, TURBOSHAFT E 1
– 1 23053999 ENGINE ASSY, AIRCRAFT, TURBOSHAFT F 1
2 6893013 . PLATE ASSY, IDENTIFICATION, ENGINE (UIA 6890000) A 1
R – 2 23008562 . PLATE ASSY, IDENTIFICATION, ENGINE A 1
(UIA 23009300) (SB 23073639, PER 250 CEB 72–3256)
– 2 23005253 . PLATE ASSY, IDENTIFICATION, ENGINE D 1
– 2 23050826 . PLATE ASSY, IDENTIFICATION, ENGINE E 1
– 2 23053958 . PLATE ASSY, IDENTIFICATION, ENGINE F 1
– 2 A 23064007 . . PLATE, IDENT, ENGINE, BLANK (SB 23073639) ADEF 1
– 2 A 23073639 . . PLATE, IDENT, ENGINE, BLANK ADEF 1
– ATTACHING PARTS –
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) ADEF 2
– 4 MS122054 . WASHER, 0.164 IN. (4.166 MM) ID (FRO MS35338–137) ADEF 2
4 MS35338–137 . WASHER, LOCK–SPRING, 0.164 IN. (4.17 MM) ID ADEF 2
–––*–––
5 FIG. REF . COMPRESSOR ASSY ADEF REF
(REF 72–30–00, FIGS. 1 & 2 FOR DETAILS)
6 MS21043–4 . NUT, 0.250–28 ADEF 6
– 6 A AN960C416L . WASHER, 0.250 IN. (6.35 MM) ID (DISC.) ADE 6
–––*–––
7 FIG. REF . SHIM, TABBED (REF 72–30–00, FIG. 2) ADEF REF
- ITEM NOT ILLUSTRATED

CODE EXPLANATION: 72-00-00
A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
R – 8 6892824 . MOUNT ASSY, REAR TURBINE GP SUPPORT ADEF 1

(R&R 23069751, PER 250 CEB 72–3245)
R 8 23069751 . MOUNT ASSY, REAR TURBINE GP SUPPORT ADEF 1
(REF 250 CEB 72–3245)
9 FIG. REF . NUT, 0.190–32 (REF 72–40–00, FIG. 1) ADEF REF
10 FIG. REF . BOLT, TEE HD, 0.190–32 X 0.500 IN. (12.7 MM) ADEF REF
(REF 72–40–00, FIG. 1)
11 FIG. REF . CLAMP, CUSHIONED. 0.250 IN. (6.35 MM) ID ADEF REF
(REF 72–40–00, FIG. 1)
–––*–––
– 12 6891554 . . BEARING, PLAIN, 0.375 EYE (FRO 23001959) ADE 1
R – 12 23001959 . . BEARING, PLAIN, 0.375 EYE ADEF 1
(SB 23071966, PER 250 CEB 72–3245)
R 12 23071966 . . BEARING, PLAIN, SELF–ALIGNING, 0.375 EYE ADEF 1
(REF 250 CEB 72–3245)
– 13 6893648 . ADAPTER, FLANGED, VENT TUBE (FRO 23032944) ADE 1
13 23032944 . ADAPTER, FLANGED, VENT TUBE ADEF 1
(ADDED, PER 250 CEB 72–3158)
14 MS21043–3 . NUT, 0.190–32 (REF 250 CEB 72–3158) ADEF 4
– 15 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) (SB MS9489–06) ADEF 4
15 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) ADEF 4
16 23009312 . GASKET, VENT TUBE ADEF 2
–––*–––
17 23008495–1 . ORIFICE, COMPR VENT, 0.250 IN. (6.35 MM) ADEF 1
(ADDED, PER 250 CEB 72–3158)
– 17 23008495–2 . ORIFICE, COMPR VENT, 0.313 IN. (7.95 MM) ADEF AR
– 17 23008495–7 . ORIFICE, COMPRESSOR VENT, 0.281 IN. (7.14 MM) ADEF AR
18 AN929–4J . CAP ASSY (ADDED, PER 250 CEB 72–3158) ADEF 1
– 18 AN929–4K . CAP ASSY ADEF ALT
– 18 MS9314–04 . CAP ASSY ADEF ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY
19 6893650 . TUBE, VENT, COMPR TO TURBINE ADE 1

(SB 23033156 OR 23051149, PER 250 CEB 72–3158)
– 20 23033156 . TUBE ASSY, VENT, COMPR TO TURBINE DE 1
(SB 23050824 OR 23051149, PER 250 CEB 72–3158)
– 20 23050824 . TUBE ASSY, VENT, COMPR TO TURBINE DE 1
(FRO 23051149)
20 23051149 . TUBE ASSY, VENT, COMPR TO TURBINE ADEF 1
21 6899185 . TUBE ASSY, BLEED VALVE TO EXHAUST COLLECTOR ADEF 1
(REF 250 CEB 75–3020 OR 75–3022)
(FRO 23056648 FOR C30G/2)
– 21 23056648 . TUBE ASSY, BLEED VALVE TO EXHAUST COLLECTOR F 1
22 6898808 . TUBE ASSY, ADAPTER, BLEED VALVE ADEF 1
(REF 250 CEB 75–3020 OR 75–3022)
23 MS21043–3 . NUT, 0.190–32 ADEF 3
(REF 250 CEB 75–3020 OR 75–3022)
(REF 250 CEB 75–3020 OR 75–3022)
25 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) ADEF 1
(REF 250 CEB 75–3020 OR 75–3022)
R – 26 MS122914 . CLAMP, 1.000 IN. (25.4 MM) ID ADEF 1
(REF 250 CEB 75–3020 OR 75–3022)
(SELECT BEST FIT)
R 26 MS122915 . CLAMP, 1.062 IN. (27.0 MM) ID ADEF ALT
(SELECT BEST FIT)
–––*–––
27 AN775–16D . BOLT, UNIVERSAL FITTING, 1.312–12 ADEF 1
28 AN901–16A . GASKET, 1.318 IN. (33.477 MM) ID ADEF 2
29 6898761 . ELBOW, UNIVERSAL, 90° ADEF 1
30 AS3085–019 . PACKING, 0.801 IN. (20.345 MM) ID ADEF 1
– 31 6898762 . ADAPTER, GEARBOX OVERBOARD VENT ADEF 1
(FRO 23068212)
31 23068212 . ADAPTER, FLANGED VENT TUBE, ADEF 1
GEARBOX OVERBOARD VENT
32 MS21043–3 . NUT, 0.190–32 ADEF 2
34 6899354 . GASKET, VENT TUBE ADEF 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
35 6892099 . SHIELD PLATE, N2 PICKUP ADEF 1

36 MS21043–3 . NUT, 0.190–32 ADEF 2
–––*–––
– 37 6893641 . FIREWALL ASSY, VERTICAL ADE 1
(R&R 6899167, PER 250 CEB 72–3007)
– 37 6899167 . FIREWALL ASSY, VERTICAL (FRO 23009594) ADE 1
– 37 23009594 . FIREWALL ASSY, VERTICAL ADE 1
(R&R 23032326, PER 250 CEB 72–3158)
37 23032326 . FIREWALL ASSY, VERTICAL ADEF 1
– 38 6749213–02 . . NUT, ANCHOR (FRO MS21048–3W) ADE 7
38 MS21048–3W . . NUT, SLFLKG ADEF 7
– 38 6890470–3 . . NUT, ANCHOR ADEF ALT
– 39 23032277 . . PAD, MOUNTING, VERTICAL FIRESHIELD ADE AR
(FOR SERV REPAIR)
– 40 23032942 . . INSERT, VERTICAL FIREWALL ADEF 1
– 41 6891587 . RETAINER, FIRESHIELD SLIP JOINT ADE 1
(R&R 6899168, PER 250 CEB 72–3007)
41 6899168 . RETAINER, FIRESHIELD SLIP–JOINT ADEF 1
42 6820055–7 . SCREW, SOCKET HD, 0.190–32 X 0.438 IN. (11.13 MM) ADEF 7
– 42 6871051–05 . BOLT, INT, WRENCHING, 0.190–32 X 0.438 IN. ADEF ALT
(11.13 MM)
43 AN960C10L . WASHER, 0.190 IN. (4.826 MM) ID ADEF 7
–––*–––
– 44 6892821 . BLANKET, INSULATION, FIRESHIELD ADE 1
(R&R 23005743, PER 250 CEB 72–3079)
(REF 250 CEB 72–3027)
44 23005743 . BLANKET, INSULATION, FIRESHIELD ADEF 1
46 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID ADEF 2
–––*–––
47 6892826 . FITTING, DRAIN SCAVENGE OIL ADEF 1
48 6893029 . SUMP ASSY, SCAVENGE OIL, EXTERNAL ADEF 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 1/00
UNITS
1234567 CODE ASSY
51 6784419–8 . SEAL, 0.938 IN. (23.825 MM) OD ADEF 2

– 51 MS9372–029 . SEAL, 0.938 IN. (23.825 MM) OD ADEF ALT
52 FIG. REF . TURBINE ASSY, GAS PRODUCER & POWER ADEF REF
(REF 72–50–00, FIG. 1 THRU 4 FOR DETAILS)
53 FIG. REF . SHIM, TABBED (REF 72–50–00, FIG. 1) ADEF REF
54 MS21043–5 . NUT, 0.3125–24 ADEF 6
–––*–––
55 FIG. REF . GEARBOX ASSY, POWER & ACCESSORY ADEF REF
(REF 72–60–00, FIG. 1 & 4 THRU 16, FOR DETAILS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 1/00
72-00-00
FIGURE 1
PAGE 7
NOV 1/00
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30P)

72-00-00
FIGURE 2
PAGE 0
NOV 15/99
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30P)

72-00-00
FIGURE 2
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
2 TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30P)
– 1 23004545 ENGINE ASSY, AIRCRAFT, TURBOSHAFT B 1

– 1 23062065 ENGINE ASSY, AIRCRAFT, TURBOSHAFT B 1
(FUEL CONTROL HEATER CONFIGURATION)
2 23065834 . PLATE ASSY, IDENTIFICATION, ENGINE B 1
(UIA 23004545)
– 2 23004532 . PLATE ASSY, IDENTIFICATION, ENGINE B 1
(UIA 23062065)
R – 2 A 23064007 . . PLATE, IDENT, ENGINE, BLANK (SB 23073639) B 1
R – 2 A 23073639 . . PLATE, IDENT, ENGINE, BLANK B 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) B 2
– 4 MS122054 . WASHER, 0.164 IN. (4.166 MM) ID (FRO MS35338–137) B 2
4 MS35338–137 . WASHER, LOCK–SPRING, 0.164 IN. (4.17 MM) ID B 2
–––*–––
5 FIG. REF . COMPRESSOR ASSY B REF
(REF 72–30–00, FIG. 1 & 2 FOR DETAILS)
6 MS21043–4 . NUT, 0.250–28 B 6
–––*–––
7 FIG. REF . SHIM, TABBED (REF 72–30–00, FIG. 2) B REF
R – 8 6892824 . MOUNT ASSY, REAR, ENGINE B 1
(R&R 23069751, PER 250 CEB 72–3245)
R 8 23069751 . MOUNT ASSY, REAR, ENGINE B 1
(REF 250 CEB 72–3245)
9 FIG. REF . NUT, 0.190–32 (REF 72–40–00, FIG. 1) B REF
10 FIG. REF . BOLT, TEE HD, 0.190–32 X 0.562 IN. (14.276 MM) B REF
(REF 72–40–00, FIG. 1)
11 FIG. REF . CLAMP, CUSHIONED, 0.250 IN. (6.35 MM) B REF
(REF 72–40–00, FIG. 1)
–––*–––
– 12 6891554 . . BEARING, PLAIN, 0.375 EYE (FRO 23001959) B 1
R – 12 23001959 . . BEARING, PLAIN, 0.375 EYE B 1
(SB 23071966, PER 250 CEB 72–3245)
R 12 23071966 . . BEARING, PLAIN, SELF–ALIGNING, 0.375 EYE B 1
(REF 250 CEB 72–3245)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
– 13 6893648 . ADAPTER, FLANGED, VENT TUBE (FRO 23032944) B 1

13 23032944 . ADAPTER, FLANGED, VENT TUBE B 1
(ADDED, PER 250 CEB 72–3158)
14 MS21043–3 . NUT, 0.190–32 (REF 250 CEB 72–3158) B 4
– 15 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.525 MM) (SB MS9489–06) B 4
15 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) B 2
16 23009312 . GASKET, VENT TUBE B 2
–––*–––
17 23008495–1 . ORIFICE, COMPRESSOR VENT, 0.250 IN. (6.35 MM) B 1
(ADDED, PER 250 CEB 72–3158)
– 17 23008495–2 . ORIFICE, COMPRESSOR VENT, 0.313 IN. (7.95 MM) B AR
18 AN929–4J . CAP ASSY, 0.4375–20 (ADDED, 250 CEB 72–3158) B 1
– 18 AN929–4K . CAP ASSY, 0.4375–20 B ALT
– 18 MS9314–04 . CAP ASSY B ALT
19 6893650 . TUBE, VENT, COMPRESSOR TO TURBINE B 1
(SB 23033156 OR 23051149, PER 250 CEB 72–3158)
– 20 23033156 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE B 1
(SB 23050824 OR 23051149, PER 250 CEB 72–3158)
– 20 23050824 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE B 1
(FRO 23051149)
20 23051149 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE B 1
21 6899185 . TUBE ASSY, BLEED VALVE TO EXHAUST COLLECTOR B 1
22 6898808 . TUBE ASSY, ADAPTER, BLEED VALVE B 1
23 MS21043–3 . NUT, 0.190–32 B 3
24 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) B 2
25 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) B 1
R – 26 MS122914 . CLAMP, 1.000 IN. ID (25.4 MM) (SELECT BEST FIT) B 1
R 26 MS122915 . CLAMP, 1.062 IN. ID (27.0 MM) (SELECT BEST FIT) B ALT
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
27 AN775–16D . BOLT, UNIVERSAL FITTING, 1.312–12 B 1

28 AN901–16A . GASKET, 1.318 IN. ID (33.477 MM) B 2
29 6898761 . ELBOW, UNIVERSAL, 90° B 1
30 AS3085–019 . PACKING, 0.801 IN. (20.345 MM) ID B 1
– 31 6898762 . ADAPTER, GEARBOX OVERBOARD VENT B 1
(FRO 23068212)
31 23068212 . ADAPTER, FLANGED VENT TUBE, B 1
32 MS21043–3 . NUT, 0.190–32 B 2
33 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.525 MM) B 2
34 6899354 . GASKET, VENT TUBE B 1
–––*–––
35 6892099 . SHIELD PLATE, N2 PICKUP B 1
36 MS21043–3 . NUT, 0.190–32 B 2
–––*–––
– 37 6893641 . FIREWALL ASSY, VERTICAL B 1
(R&R 6899167, PER 250 CEB 72–3007)
(R&R 23009594, PER 250 CEB 72–3110)
(R&R 23032326, PER 250 CEB 72–3158)
37 23032326 . FIREWALL ASSY, VERTICAL B 1
– 38 6749213–02 . . NUT, ANCHOR (FRO MS21048–3W) B 7
38 MS21048–3W . . NUT, SLFLKG B 7
– 38 6890470–3 . . NUT, ANCHOR B ALT
– 39 23032277 . . PAD, MOUNTING, VERTICAL FIRESHIELD B AR
(FOR SERV REPAIR)
– 40 23032942 . . INSERT, VERTICAL FIREWALL B 1
– 41 6891587 . RETAINER, FIRESHIELD SLIP JOINT B 1
(R&R 6899168, PER 250 CEB 72–3007)
41 6899168 . RETAINER, FIRESHIELD SLIP JOINT B 1
42 6820055–7 . SCREW, SOCKET HD, 0.190–32 X 0.438 IN. (11.125 MM) B 7
– 42 6871051–05 . BOLT, INT, WRENCH, 0.190–32 X 0.438 IN. (11.125 MM) B ALT
43 AN960C10L . WASHER, 0.190 IN. (4.826 MM) ID B 7
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 1/00
UNITS
1234567 CODE ASSY
– 44 6892821 . BLANKET, INSULATION, FIRESHIELD (R&R 23005743, B 1

PER 250 CEB 72–3079) (REF 250 CEB 72–3027)
44 23005743 . BLANKET, INSULATION, FIRESHIELD B 1
45 AN104607 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 2
46 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID B 2
–––*–––
47 6892826 . FITTING, DRAIN SCAVENGE OIL B 1
48 6893029 . SUMP ASSY, SCAVENGE OIL, EXTERNAL B 1
49 MS9566–06 . BOLT, 0.250–28 X 0.500 IN. (12.7 MM) B 3
50 MS9566–30 . BOLT, 0.250–28 X 2.250 IN. (57.15 MM) B 3
–––*–––
51 6784419–8 . SEAL, 0.938 IN. (23.825 MM) OD B 2
– 51 MS9372–029 . SEAL, 0.938 IN. (23.825 MM) OD B ALT
52 FIG. REF . TURBINE ASSY, GAS PRODUCER & POWER B REF
(REF 72–50–00, FIGS. 1 THRU 4 FOR DETAILS)
53 FIG. REF . SHIM, TABBED (REF 72–50–00, FIG. 1) B REF
54 MS21043–5 . NUT, 0.3125–24 B 6
–––*–––
55 FIG. REF . GEARBOX ASSY, POWER & ACCESSORY B REF
(REF 72–60–00, FIG. 2, 5, 7, 9 THRU 13 & 15,
FOR DETAILS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 1/00
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30M)

72-00-00
FIGURE 3
PAGE 0
NOV 15/99
TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30M)

72-00-00
FIGURE 3
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
3 TURBOSHAFT AIRCRAFT ENGINE ASSY (250–C30M)
– 1 23005219 ENGINE ASSY, AIRCRAFT, TURBOSHAFT C 1

2 23005230 . PLATE ASSY, IDENTIFICATION, ENGINE C 1
R – 2 A 23064007 . . PLATE, IDENT, ENGINE, BLANK (SB 23073639) C 1
R – 2 A 23073639 . . PLATE, IDENT, ENGINE, BLANK C 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) C 2
– 4 MS122054 . WASHER, 0.164 IN. (4.166 MM) ID (FRO MS35338–137) C 2
4 MS35338–137 . WASHER, LOCK–SPRING, 0.164 IN. (4.17 MM) ID C 2
–––*–––
5 FIG. REF . COMPRESSOR ASSY C REF
(REF 72–30–00, FIGS. 1 & 2 FOR DETAIL PARTS)
6 MS21043–4 . NUT, 0.250–28 C 6
–––*–––
7 FIG. REF . SHIM, TABBED (REF 72–30–00, FIG. 2) C REF
R – 8 6892824 . MOUNT ASSY, REAR, ENGINE C 1
(R&R 23069751, PER 250 CEB 72–3245)
R 8 23069751 . MOUNT ASSY, REAR, ENGINE C 1
(REF 250 CEB 72–3245)
9 FIG. REF . NUT, 0.190–32 (REF 72–40–00, FIG. 1) C REF
10 FIG. REF . BOLT, TEE HEAD, 0.190–32 X 0.562 IN C REF
(14.276 MM) (REF 72–40–00, FIG. 1)
11 FIG. REF . CLAMP, CUSHIONED. 0.250 IN. (6.35 MM) ID C REF
(REF 72–40–00, FIG. 1)
–––*–––
– 12 6891554 . . BEARING, PLAIN, 0.375 EYE (FRO 23001959) C 1
R – 12 23001959 . . BEARING, PLAIN, 0.375 EYE C 1
(SB 23071966, PER 250 CEB 72–3245)
R 12 23071966 . . BEARING, PLAIN, SELF–ALIGNING, 0.375 EYE C 1
(REF 250 CEB 72–3245)
– 13 6893648 . ADAPTER, FLANGED, VENT TUBE (FRO 23032944) C 1
13 23032944 . ADAPTER, FLANGED, VENT TUBE C 1
(ADDED, PER 250 CEB 72–3158)
14 MS21043–3 . NUT, 0.190–32 (REF 250 CEB 72–3158) C 4
– 15 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) (SB MS9489–06) C 4
15 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) C 4
16 23009312 . GASKET, VENT TUBE C 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
17 23008495–1 . ORIFICE, COMPRESSOR VENT, 0.250 IN. (6.35 MM) C 1

(ADDED, PER 250 CEB 72–3158)
– 17 23008495–2 . ORIFICE, COMPRESSOR VENT, 0.313 IN. (7.95 MM) C AR
18 AN929–4J . CAP ASSY, 0.4375–20 (ADDED 250 CEB 72–3158) C 1
– 18 AN929–4K . CAP ASSY, 0.4375–20 C ALT
– 18 MS9314–04 . CAP ASSY C ALT
19 6893650 . TUBE, VENT COMPR TO TURBINE (SB 23033156 C 1
OR 23051149, PER 250 CEB 72–3158)
– 20 23033156 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE C 1
(SB 23050824 OR 23051149, PER 250 CEB 72–3158)
– 20 23050824 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE C 1
(FRO 23051149)
20 23051149 . TUBE ASSY, VENT, COMPRESSOR TO TURBINE C 1
21 6899185 . TUBE ASSY, BLEED VALVE TO EXHAUST COLLECTOR C 1
22 6898808 . TUBE ASSY, ADAPTER, BLEED VALVE C 1
23 MS21043–3 . NUT, 0.190–32 C 3
24 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) C 2
25 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) C 1
R – 26 MS122914 . CLAMP, 1.000 IN. ID (25.4 MM) (SELECT BEST FIT) C 1
R 26 MS122915 . CLAMP, 1.062 IN. ID (27.0 MM) (SELECT BEST FIT) C ALT
–––*–––
27 AN775–16D . BOLT, UNIVERSAL FITTING, 1.312–12 C 1
28 AN901–16A . GASKET, 1.318 IN. ID (33.477 MM) C 2
29 6898761 . ELBOW, UNIVERSAL, 90° C 1
30 AS3085–019 . PACKING, 0.801 IN. (20.345 MM) ID C 1
– 31 6898762 . ADAPTER, GEARBOX OVERBOARD VENT C 1
(FRO 23068212)
31 23068212 . ADAPTER, FLANGED VENT TUBE, C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
32 MS21043–3 . NUT, 0.190–32 C 2
33 MS9489–04 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) C 2
34 6899354 . GASKET, VENT TUBE C 1
–––*–––
35 6892099 . SHIELD PLATE, N2 PICKUP C 1
36 MS21043–3 . NUT, 0.190–32 C 2
–––*–––
– 37 6893641 . FIREWALL ASSY, VERTICAL C 1
(R&R 6899167, PER 250 CEB 72–3007)
– 37 6899167 . FIREWALL ASSY, VERTICAL (FRO 23009594) C 1
– 37 23009594 . FIREWALL ASSY, VERTICAL C 1
(R&R 23032326, PER CEB 72–3158)
37 23032326 . FIREWALL ASSY, VERTICAL C 1
– 38 6749213–02 . . NUT, ANCHOR (FRO MS21048–3W) C 7
38 MS21048–3W . . NUT, SLFLKG C 7
– 38 6890470–3 . . NUT, ANCHOR C ALT
– 39 23032277 . . PAD, MOUNTING, VERTICAL FIRESHIELD C AR
(FOR SERV REPAIR)
– 40 23032942 . . INSERT, VERTICAL FIREWALL C 1
– 41 6891587 . RETAINER, FIRESHIELD SLIP JOINT C 1
(R&R 6899168, PER 250 CEB 72–3007)
41 6899168 . RETAINER, FIRESHIELD SLIP JOINT C 1
42 6820055–7 . SCREW, SOCKET HD, 0.190–32 X 0.438 IN. (11.125 MM) C 7
– 42 6871051–05 . BOLT, INT, WRENCHING, 0.190–32 X 0.438 IN C ALT
(11.125 MM)
43 AN960C10L . WASHER, 0.190 IN. (4.826 MM) ID C 7
–––*–––
– 44 6892821 . BLANKET, INSULATION, FIRESHIELD (R&R 23005743, C 1
PER 250 CEB 72–3079) (REF 250 CEB 72–3027)
44 23005743 . BLANKET, INSULATION, FIRESHIELD C 1
45 AN104607 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 2
46 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID C 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
47 6892826 . FITTING, DRAIN SCAVENGE OIL C 1

48 6893029 . SUMP ASSY, SCAVENGE OIL, EXTERNAL C 1
49 MS9566–06 . BOLT, 0.250–28 X 0.500 IN. (12.7 MM) C 3
50 MS9566–30 . BOLT, 0.250–28 X 2.250 IN. (57.15 MM) C 3
–––*–––
51 6784419–8 . SEAL, 0.938 IN. (23.825 MM) OD C 2
– 51 MS9372–029 . SEAL, 0.938 IN. (23.825 MM) OD C ALT
52 FIG. REF . TURBINE ASSY, GAS PRODUCER & POWER C REF
(REF 72–50–00, FIGS. 1 THRU 4 FOR DETAILS)
53 FIG. REF . SHIM, TABBED (REF 72–50–00, FIG. 1) C REF
54 MS21043–5 . NUT, 0.3125–24 C 6
–––*–––
55 FIG. REF . GEARBOX ASSY, POWER & ACCESSORY C REF
(REF 72–60–00, FIG. 3, 5, 7, 9 THRU 13 & 15,
FOR DETAILS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
ENGINE LUBE SYSTEM (250–C30, –C30S, –C30G, –C30G/2)

FIGURE 4
72-00-00
FIGURE 4
PAGE 0
NOV 1/00
UNITS
1234567 CODE ASSY
4 ENGINE LUBE SYSTEM

(250–C30, –C30S, –C30G, –C30G/2)
– 1 6892843 FUEL, LUBE & AIR SYSTEM ASSY D 1

(REF 73–10–00, 73–20–00 & 75–10–00)
– 1 23008585 FUEL, LUBE & AIR SYSTEM ASSY A 1
(BOEING C30(HU) APPL ONLY)
(REF 73–10–00, 73–20–00 & 75–10–00)
(FRO 23062098)
(BOEING C30(HU) APPL ONLY)
(REF 73–10–00, 73–20–00 & 75–10–00)
(RHEIN–FLUGZEUGBAU ACFT APPL ONLY)
(REF 73–10–00, 73–20–00 & 75–10–00)
– 1 23039783 FUEL, LUBE & AIR SYSTEM ASSY E 1
(REF 73–10–00, 72–20–00 & 75–10–00)
– 1 23055453 FUEL, LUBE & AIR SYSTEM ASSY F 1
(REF 73–10–00, 73–20–00 & 75–10–00)
2 6896449 . TUBE ASSY, SCAVENGE OIL, ADEF 1
COMPRESSOR FRONT SUPPORT TO GEARBOX
3 6892846 . TUBE ASSY, PRESSURE OIL, ADEF 1
GEARBOX TO COMPRESSOR SUPPORT
4 MS21043–3 . NUT, 0.190–32 (REF 250 CEB 72–3014) ADEF 1
4 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID ADEF 1
4 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID ADEF 1
4 6864061–04 . BUSHING, SPLIT, 0.188 IN. (4.78 MM) ID ADEF 1
–––*–––
5 6896451 . TUBE ASSY, SCAVENGE OIL, ADEF 1
GAS TURBINE SUPPORT TO GEARBOX
6 6898825 . TUBE ASSY, SCAVENGE OIL, NO. 6–7 ADEF 1
BEARING SUMP TO GEARBOX
7 MS21043–3 . NUT, 0.190–32 ADEF 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
8 MS21043–3 . NUT, 0.190–32 ADEF 1

R – 10 6857866 . BUSHING, 0.210 ID X 0.250 IN. OD X 0.375 IN. ADE 1
(5.33 X 6.35 X 9.53 MM)
(SB 6823260, PER 250 CEB 72–3160)
10 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. ADEF 1
(5.23 X 11.13 X 6.35 MM)
–––*–––
11 6893072 . TUBE ASSY, PRESSURE OIL, UNION TO FIRESHIELD ADEF 1
– 12 6898839 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING AD 1
TO UNION (SB 6871937, PER 250 CEB 72–3138)
12 6871937 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING ADEF 1
TO UNION
13 MS9193–05 . NIPPLE, TUBE, 0.500–20 ADEF 1
15 MS9193–03 . NIPPLE, TUBE, 0.375–24 ADEF 1
17 AN837–5J . ELBOW, 0.500–20 ADEF 2
– 17 AN837–5K . ELBOW, 0.500–20 ADEF ALT
18 AN924–5J . NUT, 0.500–20 ADEF 2
– 18 AN924–5K . NUT, 0.500–20 ADEF ALT
20 AN833–4J . ELBOW, 0.4375–20 ADEF 1
– 20 AN833–4K . ELBOW, 0.4375–20 ADEF ALT
21 AN924–4J . NUT, 0.4375–20 ADEF 1
– 21 AN924–4K . NUT, 0.4375–20 ADEF ALT
23 AN815–4J . UNION, 0.4375–20 (UW 6898839 TUBE) ADEF 1
– 23 AN815–4K . UNION, 0.4375–20 (UW 6898839 TUBE) ADEF ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
– 24 23031856 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) ADEF 1
(FRO 23062087)
– 24 23062087 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) ADEF 1
R 24 23074872 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) ADEF ALT
– 25 4CVF646 . . FITTING (V26044) (UW 23031856) ADEF NP
25 98115 . . FITTING (V26044) (UW 23062087) ADEF NP
– 26 NAS617–5 . . PACKING, 0.414 IN. (10.516 MM) ID (UW 23031856) ADEF 1
26 MS28775–015 . . PACKING, HYDRAULIC O–RING (UW 23062087) ADEF AR
(FOR SERV USE & SPARE PARTS PROC)
– 27 4CVS61 . . SPRING, CHECK VALVE (V26044) (UW 23031856) ADEF NP
27 92133 . . SPRING, CHECK VALVE (V26044) (UW 23062087) ADEF NP
– 28 4CVP61 . . POPPET, CHECK VALVE (V26044) (UW 23031856) ADEF NP
28 98116 . . POPPET, CHECK VALVE (V26044) (UW 23062087) ADEF NP
29 23064633 . . PACKING, QUAD RING (UW 23062087) ADEF AR
– 30 4CVH653 . . HOUSING (V26044) (UW 23031856) ADEF NP
30 98114 . . HOUSING (V26044) (UW 23062087) ADEF NP

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
ENGINE LUBE SYSTEM (250–C30P)

FIGURE 5
72-00-00
FIGURE 5
PAGE 0
NOV 1/00
UNITS
1234567 CODE ASSY
5 ENGINE LUBE SYSTEM (250–C30P)
– 1 23004531 FUEL, LUBE & AIR SYSTEM ASSY B 1

(REF 73–10–00, 73–20–00 & 75–10–00)
– 1 23062066 FUEL, LUBE & AIR SYSTEM ASSY B 1
(REF 73–10–00, 73–20–00 & 75–10–00)
– 2 6896449 . TUBE ASSY, SCAVENGE OIL, COMPRESSOR FRONT B 1
SUPPORT TO GEARBOX (FRO 23058110)
(REF 250 IB–3006)
R – 2 23058110 . TUBE ASSY, SCAVENGE OIL, COMPRESSOR FRONT B 1
SUPPORT TO GEARBOX (SB 23069706,
CUSTOMER OPTION, PER 250 CEB 72–3234)
2 23069706 . TUBE ASSY, SCAVENGE OIL, COMPRESSOR FRONT B 1
SUPPORT TO GEARBOX
3 6892846 . TUBE ASSY, PRESSURE OIL, GEARBOX TO B 1
COMPRESSOR SUPPORT
4 MS21043–3 . NUT, 0.190–32 B 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
4 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID B 1
4 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID B 1
4 6864061–04 . BUSHING, SPLIT, 0.188 IN. (4.78 MM) ID B 1
–––*–––
5 6896451 . TUBE ASSY, SCAVENGE OIL, GAS TURBINE B 1
SUPPORT TO GEARBOX
6 6898825 . TUBE ASSY, SCAVENGE OIL, NO. 6–7 BEARING B 1
SUMP TO GEARBOX
7 MS21043–3 . NUT, 0.190–32 B 1
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
8 MS21043–3 . NUT, 0.190–32 B 1
8 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
UNITS
1234567 CODE ASSY
– 10 6857866 . BUSHING, 0.210 ID X 0.250 IN. OD X 0.375 IN. B 1

(5.33 X 6.35 X 9.53 MM)
(SB 6823260, PER 250 CEB 72–3160)
10 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. B 1
(5.23 X 11.13 X 6.35 MM)
–––*–––
11 6893072 . TUBE ASSY, PRESSURE OIL, UNION TO FIRESHIELD B 1
– 12 6898839 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING B 1
TO UNION (SB 6871937 PER 250 CEB 72–3138)
12 6871937 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING B 1
TO UNION
13 MS9193–05 . NIPPLE, TUBE, 0.500–20 B 1
15 MS9193–03 . NIPPLE, TUBE, 0.375–24 B 1
17 AN837–5J . ELBOW, 0.500–20 B 2
– 17 AN837–5K . ELBOW, 0.500–20 B ALT
18 AN924–5J . NUT, 0.500–20 B 2
– 18 AN924–5K . NUT, 0.500–20 B ALT
20 AN833–4J . ELBOW, 0.4375–20 B 1
– 20 AN833–4K . ELBOW, 0.4375–20 B ALT
21 AN924–4J . NUT, 0.4375–20 B 1
– 21 AN924–4K . NUT, 0.4375–20 B ALT
23 AN815–4J . UNION, 0.4375–20 (UW 6898839 TUBE) B 1
– 23 AN815–4K . UNION, 0.4375–20 (UW 6898839 TUBE) B ALT
– 24 23031856 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) B 1
(FRO 23062087)
– 24 23062087 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) B 1
R 24 23074872 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) B ALT
– 25 4CVF646 . . FITTING (V26044) (UW 23031856) B NP
25 98115 . . FITTING (V26044) (UW 23062087) B NP
– 26 NAS617–5 . . PACKING, 0.414 IN. (10.516 MM) ID (UW 23031856) B 1
26 MS28775–015 . . PACKING, HYDRAULIC O–RING (UW 23062087) B AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 27 4CVS61 . . SPRING, CHECK VALVE (V26044) (UW 23031856) B NP

27 92133 . . SPRING, CHECK VALVE (V26044) (UW 23062087) B NP
– 28 4CVP61 . . POPPET, CHECK VALVE (V26044) (UW 23031856) B NP
28 98116 . . POPPET, CHECK VALVE (V26044) (UW 23062087) B NP
29 23064633 . . PACKING, QUAD RING (UW 23062087) B AR
– 30 4CVH653 . . HOUSING (V26044) (UW 23031856) B NP
30 98114 . . HOUSING (V26044) (UW 23062087) B NP

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
ENGINE LUBE SYSTEM (250–C30M)

FIGURE 6
72-00-00
FIGURE 6
PAGE 0
NOV 1/00
UNITS
1234567 CODE ASSY
6 ENGINE LUBE SYSTEM (250–C30M)
– 1 23005222 . FUEL, LUBE & AIR SYSTEM ASSY C 1

(REF 73–10–00, 73–20–00 & 75–10–00)
2 6896449 . TUBE ASSY, SCAVENGE OIL, COMPRESSOR FRONT C 1
SUPPORT TO GEARBOX
3 6892846 . TUBE ASSY, PRESSURE OIL, GEARBOX TO C 1
COMPRESSOR SUPPORT
4 MS21043–3 . NUT, 0.190–32 C 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
4 6864046–02 . CLIP, OUTER, 0.475 IN. (12.065 MM) ID C 1
4 6864045–02 . CLIP, INNER, 0.445 IN. (11.303 MM) ID C 1
4 6864061–04 . BUSHING, SPLIT, 0.188 IN. (4.775 MM) ID C 1
–––*–––
5 6896451 . TUBE ASSY, SCAVENGE OIL, GAS TURBINE C 1
SUPPORT TO GEARBOX
6 6898825 . TUBE ASSY, SCAVENGE OIL, NO. 6–7 BEARING C 1
SUMP TO GEARBOX
7 MS21043–3 . NUT, 0.190–32 C 1
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
8 MS21043–3 . NUT, 0.190–32 C 1
8 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) C 1
R – 10 6857866 . BUSHING, 0.210 ID X 0.250 IN. OD X 0.375 IN. C 1
(5.334 X 6.35 X 9.525 MM)
(SB 6823260, PER 250 CEB 72–3160)
10 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. C 1
(5.23 X 11.13 X 6.35 MM)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
11 6893072 . TUBE ASSY, PRESSURE OIL, UNION TO FIRESHIELD C 1

– 12 6898839 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING C 1
TO UNION (SB 6871937, PER 250 CEB 72–3138)
12 6871937 . TUBE ASSY, PRESSURE OIL, ACCESSORY HOUSING C 1
TO UNION
13 MS9193–05 . NIPPLE, TUBE, 0.500–20 C 1
15 MS9193–03 . NIPPLE, TUBE, 0.375–24 C 1
17 AN837–5J . ELBOW, 0.500–20 C 2
– 17 AN837–5K . ELBOW, 0.500–20 C ALT
18 AN924–5J . NUT, 0.500–20 C 2
– 18 AN924–5K . NUT, 0.500–20 C ALT
19 23055460–05 . GASKET, NUT, 0.460 IN. (11.68 MM) ID (DISC.) C 2
20 AN833–4J . ELBOW, 0.4375–20 C 1
– 20 AN833–4K . ELBOW, 0.4375–20 C ALT
21 AN924–4J . NUT, 0.4375–20 C 1
– 21 AN924–4K . NUT, 0.4375–20 C ALT
23 AN815–4J . UNION, 0.4375–20 (UW 6898839 TUBE) C 1
– 23 AN815–4K . UNION, 0.4375–20 (UW 6898839 TUBE) C ALT
– 24 23031856 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) C 1
(FRO 23062087)
– 24 23062087 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) C 1
R 24 23074872 . VALVE, CHECK, LUBE OIL (UW 6871937 TUBE ASSY) C ALT
– 25 4CVF646 . . FITTING (V26044) (UW 23031856) C NP
25 98115 . . FITTING (V26044) (UW 23062087) C NP
– 26 NAS617–5 . . PACKING, 0.414 IN. (10.516 MM) ID (UW 23031856) C 1
26 MS28775–015 . . PACKING, HYDRAULIC O–RING (UW 23062087) C AR
– 27 4CVS61 . . SPRING, CHECK VALVE (V26044) (UW 23031856) C NP
27 92133 . . SPRING, CHECK VALVE (V26044) (UW 23062087) C NP
– 28 4CVP61 . . POPPET, CHECK VALVE (V26044) (UW 23031856) C NP
28 98116 . . POPPET, CHECK VALVE (V26044) (UW 23062087) C NP
29 23064633 . . PACKING, QUAD RING (UW 23062087) C AR
– 30 4CVH653 . . HOUSING (V26044) (UW 23031856) C NP
30 98114 . . HOUSING (V26044) (UW 23062087) C NP

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
72-00-00
FIGURE 6
PAGE 3
SEP 1/98
ENGINE SHIPPING PARTS (250–C30, –C30S, –C30G)

72-05-00
FIGURE 1
PAGE 0
SEP 1/98
ENGINE SHIPPING PARTS (250–C30, –C30S, –C30G)

72-05-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
1 ENGINE SHIPPING PARTS (250–C30, –C30S, –C30G)
– 1 6893297 SHIPPING PARTS ASSY, ENGINE ADE 1

2 6800218–325 . PLUG, PROTECTIVE, 0.750–16 ADE 2
– 3 NAS815–4A . PLUG, PROTECTIVE, 0.438–20 ADE ALT
6 A 6840364–4 . PLUG, PROTECTIVE, 0.438–20 ADE 2
7 6800193–167 . CAP, PROTECTIVE, 0.438–20 (DISC.) ADE 5
– 8 6800218–325 . PLUG, PROTECTIVE, 0.750–16 ADE ALT
– 9 NAS815–16A . PLUG, PROTECTIVE, 1.312–12 (FRO 23030799–16) ADE 1
– 9 23030799–16 . PLUG, PROTECTIVE, ELECTRICAL CONNECTOR ADE 1
(SB 6897953–16)
9 6897953–16 . CAP, PROTECTIVE, ELECTRICAL CONNECTOR ADE 1
10 NAS820–14A . PLUG, PROTECTIVE, 0.787 IN. (19.99 MM) ID ADE 1
R – 11 6800088–11 . COVER, PLASTIC (FRO 6800088–10) ADE 1
R 11 6800088–10 . COVER, PLASTIC ADE 1
12 6800088–16 . COVER, PLASTIC ADE 1
R – 12 A 6800088–17 . COVER, PLASTIC (FRO 6800088–3) ADE 1
R 12 A 6800088–3 . COVER, PLASTIC ADE 1
12 B NAS820–16A . PLUG, PROTECTIVE, 0.912 IN. (23.165 MM) ID (DISC.) ADE 2
12 C 6800088–8 . COVER, PLASTIC (DISC.) ADE ALT
13 6855319 . PLATE, COVER, ACCESSORY, 6 HOLES ADE 1
14 MS21043–4 . NUT, SLFLKG, 0.250–28 ADE 6
15 6719546 . SPACER, 0.281 ID X 0.500 OD X 0.406 IN. ADE 6
(7.137 X 12.7 X 10.312 MM)
–––*–––
16 6820085 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. ADE 1
(64.008 X 0.508 MM) (FRO 23053995)
– 16 23053995 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. ADE 1
(64.008 X 0.508 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
17 6859823 . COVER ASSY, STARTER GENERATOR ADE 1

18 AN100036 . COVER, ENGINE ACCESSORY DRIVE ADE 1
– 18 AS3222 . COVER, ENGINE ACCESSORY DRIVE ADE ALT
19 MS21044N5 . NUT, 0.3125–24 ADE 4
20 MS21043–5 . NUT, SLFLKG, 0.3125–24 ADE 4
21 MS9320–11 . WASHER, 0.312 IN. (7.93 MM) ID ADE 8
–––*–––
22 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE (FRO 23052955) ADE 1
– 22 23052955 . GASKET, ENGINE ACCESSORY DRIVE ADE 1
23 6859824 . PLATE, COVER, ACCESSORY, 6 HOLES ADE 1
(FRO 23001757)
– 23 23001757 . PLATE, COVER, ACCESSORY, 6 HOLES ADE 1
25 MS21044N4 . NUT, 0.250–28 ADE 6
26 MS21043–4 . NUT, SLFLKG, 0.250–28 ADE 8
–––*–––
28 MS9134–01 . GASKET, ENGINE ACCESSORY DRIVE (FRO 23052954) ADE 2
– 28 23052954 . GASKET, ENGINE ACCESSORY DRIVE ADE 2
29 6893698 . COVER, COMPRESSOR BLEED, PAD ADE 1
30 MS9217–05 . BOLT, 0.190–32 X 0.438 IN. (11.112 MM) ADE 3
–––*–––
– 31 6899151 . GASKET, COMPRESSOR BLEED, PAD (FRO 23001978) ADE 1
31 23068249 . GASKET, COMPRESSOR BLEED, CRES ADE 1
32 6894075 . BRACKET, SHIPPING, ELECTRICAL HARNESS ADE 1
33 AN3–3A . BOLT, 0.190–32 X 0.468 IN. (11.89 MM) ADE 2
– 33 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ADE ALT
34 AN960–10 . WASHER, 0.190 IN. (4.83 MM) ID ADE 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
35 6866246 . TAG, FUEL CONTROL PRESERVATION ADE 1

– 36 MIL–L–23699 . OIL, PRESERVING ADE AR
– 37 MIL–L–6081 . OIL, PRESERVING, GRADE 1010, FUEL SYSTEM ADE AR
– 38 23057503–16 . AGENT, DEHYDRATING, 16 UNIT BAGS (MIL–D–3464) ADE 2
– 39 6800287 . ENVELOPE, ENGINE RECORDS ADE 1
– 40 6869431 . EMBLEM, PRESSURE SENSITIVE (FRO 23009891) ADE 2
– 40 23009891 . EMBLEM, PRESSURE SENSITIVE, ALLISON ADE 2
– 41 23057504–01 . COMPOUND, CORROSION PREVENTATIVE, GRADE 1 ADE AR
(USE ON CONTAINER CLOSURE BOLTS)
(MIL–C–16173)
– 42 23057507 . SEAL, LEAD WITH NO. 0 WIRE 10 IN. (254 MM) LG ADE 4
– 43 23057509–02 . INK, MARKING, NO. 37875 WHITE (TT–I–1795A) ADE AR
44 6897266 . CONTAINER ASSY, SHIPPING, ENGINE ADE 1
45 6800193–164 . CAP, PROTECTIVE, 0.375–24 ADE 1
46 6800193–170 . CAP, PROTECTIVE, 0.500–20 ADE 1
– 46 6897953–8 . CAP, PROTECTIVE, 0.500–20 ADE ALT
47 23003439–6 . CLOSURE, PROTECTIVE, SHIPPING ADE 1
– 47 6823492–13 . CAP, PROTECTIVE DUST & MOISTURE SEAL ADE ALT
– 48 23052363 . DECAL, WARNING ADE 1
– 49 23057500 . OIL, LUBE, SYNTHETIC, MIL–L–23699 ADE AR
– 50 23057501 . OIL, LUBE, MIL–L–6081 ADE AR
– 51 23057507 . SEAL, LEAD, 10 IN ADE AR
– 52 23057506–02 . LABEL, DOMESTIC ADDRESS ADE 1
– 53 23057510 . NAIL, 9 PENNY, CEMENT COATED ADE AR
– 54 23057511–1101 . PLYWOOD, FLAT PANEL, NN–P–530 ADE AR
(S P/N 23057511–01)
– 55 23057512–03 . TAPE, PRESSURE SENSITIVE, 1 IN. WIDE ADE AR
(S P/N 23057512–01)
– 56 23057513–GC004 . CARTON, CORRUGATED, 3 X 5.5 X 9 ADE AR
(S P/N 23057513–GD110)
– 57 23057514–FM001 . CUSHIONING, PROTECTIVE ADE AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
– 58 23057533 . LOGBOOK, TURBOSHAFT ADE 1

– 59 23058547 . LOGBOOK, SPARE PAGES, ENGINE, WHITE ADE AR
– 60 23058831 . LOGBOOK, SPARE PAGES, COMPRESSOR, BLUE ADE AR
– 61 23055354 . LOGBOOK, SPARE PAGES, GEARBOX, CANARY ADE AR
– 62 23055355 . LOGBOOK, SPARE PAGES, TURBINE, CHERRY ADE AR
– 63 23055356 . LOGBOOK, SPARE PAGES, ACCESSORY, BEIGE ADE AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
ENGINE SHIPPING PARTS (250–C30P)

72-05-00
FIGURE 2
PAGE 0
SEP 1/98
ENGINE SHIPPING PARTS (250–C30P)

72-05-00
FIGURE 2
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
2 ENGINE SHIPPING PARTS (250–C30P)
– 1 23004533 SHIPPING PARTS ASSY, ENGINE B 1

2 6800218–325 . PLUG, PROTECTIVE, 0.750–16 (SB 6840364–8) B 2
2 6840364–8 . PLUG, PROTECTIVE, 0.750–16 B 2
– 3 6800218–322 . PLUG, PROTECTIVE, 0.438–20 (SB 6840364–4) B 2
– 3 NAS815–4A . PLUG, PROTECTIVE, 0.438–20 B ALT
– 4 6840364–3 . PLUG, PROTECTIVE, 0.375–24 B 1
7 6800193–167 . CAP, PROTECTIVE, 0.438–20 B 4
– 8 6800218–325 . PLUG, PROTECTIVE, 0.750–16 B ALT
9 NAS813–16Y . PLUG, PROTECTIVE, 0.974 IN. (24.74 MM) ID B 1
R – 10 6800088–11 . COVER, PLASTIC (FRO 6800088–10) B 1
R 10 6800088–10 . COVER, PLASTIC B 1
11 6800088–16 . COVER, PLASTIC B 1
R – 12 6800088–17 . COVER, PLASTIC (FRO 6800088–3) B 1
R 12 6800088–3 . COVER, PLASTIC B 1
13 6855319 . PLATE, COVER, ACCESSORY, 6 HOLES B 1
14 MS21043–4 . NUT, SLFLKG, 0.250–28 B 6
(7.137 X 12.7 X 10.312 MM)
–––*–––
16 6820085 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. B 1
(64.008 X 0.508 MM) (FRO 23053995)
– 16 23053995 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. B 1
(64.008 X 0.508 MM)
17 6859823 . COVER ASSY, STARTER GENERATOR B 1
17 A 23052955 . GASKET, STARTER GENERATOR PAD B 1
18 MS21044N5 . NUT, 0.3125–24 B 4
19 MS9320–11 . WASHER, 0.312 IN. (7.93 MM) ID B 4
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
20 23001757 . PLATE, COVER, ACCESSORY, 6 HOLES B 1

20 A 23053995 . GASKET, FORWARD PTO PAD B 1
21 6859822 . COVER, ENGINE ACCESSORY DRIVE B 2
21 A 23052954 . GASKET, TACHOMETER PADS B 2
22 MS21044N4 . NUT, 0.250–28 B 6
23 MS21043–4 . NUT, SLFLKG, 0.250–28 B 8
–––*–––
25 6893698 . COVER, COMPRESSOR BLEED, PAD B 1
26 MS9217–05 . BOLT, 0.190–32 X 0.438 IN. (11.112 MM) B 3
–––*–––
– 27 23001978 . GASKET, COMPRESSOR BLEED, PAD (FRO 23005247) B 1
27 23068249 . GASKET, COMPRESSOR BLEED, CRES B 1
28 6866246 . TAG, FUEL CONTROL PRESERVATION B 1
– 29 23057500 . OIL, LUB, SYNTHETIC B AR
– 30 23057501 . OIL, LUB GRADE 10 B AR
– 31 23057503–16 . DESICCANT (16 UNIT BAGS) B 2
– 32 6800287 . ENVELOPE, ENGINE RECORDS B 1
– 33 6869431 . EMBLEM, PRESSURE SENSITIVE (FRO 23009891) B 2
– 33 23009891 . EMBLEM, PRESSURE SENSITIVE, ALLISON B 2
– 34 23057504–01 . COMPOUND, CORROSION PREVENTATIVE, GRADE 1 B AR
– 35 23057507 . SEAL, LEAD WITH NO. 0 WIRE 10 IN. (254 MM) LG B 4
– 36 23057502 . INK, MARKING, NO. A–A–208 WHITE B AR
37 6897266 . CONTAINER ASSY, SHIPPING, ENGINE B 1
– 38 23052363 . DECAL, WARNING B 1
R – 39 23030799–10 . CAP, PROTECTIVE, ELECTRICAL CONNECTOR B 1
(SB 6897953–10)
R – 39 6897953–10 . CAP, PROTECTIVE, ELECTRICAL CONNECTOR, 0.625 B 1
– 40 NAS816–29 . CAP, PROTECTIVE, PLAIN TUBE B 1
(USED WITH FUEL CONTROL HEATER KIT)
– 41 NAS815–4A . PLUG, PROTECTIVE, 0.438–20 B ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
– 42 23057533 . LOGBOOK, TURBOSHAFT B 1

R – 43 23058547 . LOGBOOK, SPARE PAGES, ENGINE, WHITE B AR
R – 44 23058831 . LOGBOOK, SPARE PAGES, COMPRESSOR, BLUE B AR
R – 45 23055354 . LOGBOOK, SPARE PAGES, GEARBOX, CANARY B AR
R – 46 23055355 . LOGBOOK, SPARE PAGES, TURBINE, CHERRY B AR
R – 47 23055356 . LOGBOOK, SPARE PAGES, ACCESSORY, BEIGE B AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
72-05-00
FIGURE 2
PAGE 5
SEP 1/98
ENGINE SHIPPING PARTS (250–C30M)

72-05-00
FIGURE 3
PAGE 0
SEP 1/98
ENGINE SHIPPING PARTS (250–C30M)

72-05-00
FIGURE 3
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
3 ENGINE SHIPPING PARTS (250–C30M)
– 1 23005231 SHIPPING PARTS ASSY, ENGINE C 1

2 6800218–325 . PLUG, PROTECTIVE, 0.750–16 C 2
– 3 NAS815–4A . PLUG, PROTECTIVE, 0.438–20 C ALT
7 6800193–167 . CAP, PROTECTIVE, 0.438–20 C 4
– 8 6800218–325 . PLUG, PROTECTIVE, 0.750–16 C ALT
– 9 23030799–16 . PLUG, PROTECTIVE, ELECTRICAL CONNECTOR C 1
(SB 6897953–16)
9 6897953–16 . CAP, PROTECTIVE, ELECTRICAL CONNECTOR C 1
R – 10 6800088–11 . COVER, PLASTIC (FRO 6800088–10) C 1
R 10 6800088–10 . COVER, PLASTIC C 1
11 6800088–16 . COVER, PLASTIC C 1
R – 12 6800088–17 . COVER, PLASTIC (FRO 6800088–3) C 1
R 12 6800088–3 . COVER, PLASTIC C 1
13 6855319 . PLATE, COVER, ACCESSORY, 6 HOLES C 1
14 MS21043–4 . NUT, SLFLKG, 0.250–28 C 6
(7.137 X 12.7 X 10.31 MM)
–––*–––
16 6820085 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. C 1
(64.008 X 0.51 MM) (FRO 23053995)
– 16 23052955 . GASKET, 6 MOUNTING HOLE, 2.52 ID X 0.020 IN. C 1
(64.008 X 0.51 MM)
17 6859823 . COVER ASSY, STARTER GENERATOR C 1
18 MS21044N5 . NUT, 0.3125–24 C 4
19 MS9320–11 . WASHER, 0.312 IN. (7.93 MM) ID C 4
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
20 23001757 . PLATE, COVER, ACCESSORY, 6 HOLES C 1

21 6859822 . COVER, ENGINE ACCESSORY DRIVE C 2
22 MS21044N4 . NUT, 0.250–28 C 6
23 MS21043–4 . NUT, SLFLKG, 0.250–28 C 8
–––*–––
25 MS9134–01 . GASKET, ENGINE ACCESSORY DRIVE (FRO 23052954) C 2
– 25 23053994 . GASKET, ENGINE ACCESSORY DRIVE C 2
26 6893698 . COVER, COMPRESSOR BLEED, PAD C 1
27 MS9217–05 . BOLT, 0.190–32 X 0.438 IN. (11.112 MM) C 3
–––*–––
– 28 23001978 . GASKET, COMPRESSOR BLEED, PAD (FRO 23005247) C 1
28 23068249 . GASKET, COMPRESSOR BLEED, PAD C 1
29 6866246 . TAG, FUEL CONTROL PRESERVATION C 1
30 23005396 . BRACKET, SHIPPING, ELECTRICAL HARNESS C 1
31 AN3–3A . BOLT, 0.190–32 X 0.468 IN. (11.89 MM) C 1
– 31 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C ALT
32 AN960–10 . WASHER, 0.190 IN. (4.826 MM) ID C 1
–––*–––
34 NAS820–14S . PLUG, PROTECTIVE, 0.787 ID X 0.847 OD C 1
35 NAS813–8 . CAP, PROTECTIVE, 0.476 IN. ID C 1
– 36 23057500 . OIL, LUBE, SYNTHETIC C AR
– 37 23057501 . OIL, LUBE, GRADE 1010 C AR
– 38 23057503–16 . DESICCANT (16 UNIT BAGS) C 2
– 39 6800287 . ENVELOPE, ENGINE RECORDS C 1
– 40 6869431 . EMBLEM, PRESSURE SENSITIVE (FRO 23009891) C 2
– 40 23009891 . EMBLEM, PRESSURE SENSITIVE, ALLISON C 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
– 41 23057504–01 . COMPOUND, CORROSION PREVENTATIVE, GRADE 1 C AR

– 42 23057507 . SEAL, LEAD 10 IN. WIRE ATTACHED (254 MM) LG C 4
– 43 23057502 . INK, MARKING, NO. A–A–208 WHITE C AR
44 6897266 . CONTAINER ASSY, SHIPPING, ENGINE C 1
(V94231 P/N 0–14660)
45 6800193–164 . CAP, PROTECTIVE, 0.375–24 C 1
– 46 23052363 . DECAL, WARNING C 1
– 47 23057533 . LOGBOOK, TURBOSHAFT C 1
– 48 23058547 . LOGBOOK, SPARE PAGES, ENGINE, WHITE C AR
– 49 23058831 . LOGBOOK, SPARE PAGES, COMPRESSOR, BLUE C AR
– 50 23055354 . LOGBOOK, SPARE PAGES, GEARBOX, CANARY C AR
– 51 23055355 . LOGBOOK, SPARE PAGES, TURBINE, CHERRY C AR
– 52 23055356 . LOGBOOK, SPARE PAGES, ACCESSORY, BEIGE C AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
72-05-00
FIGURE 3
PAGE 5
SEP 1/98
ENGINE SHIPPING PARTS (250–C30G/2)

72-05-00
FIGURE 4
PAGE 0
SEP 1/98
ENGINE SHIPPING PARTS (250–C30G/2)

72-05-00
FIGURE 4
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
10 ENGINE SHIPPING PARTS (250–C30G/2)
– 1 23055452 SHIPPING PARTS ASSY, ENGINE F 1

2 6800218–325 . PLUG, PROTECTIVE, 0.750–16 (SB 6840364–8) F 2
– 2 6840364–8 . PLUG, PROTECTIVE, 0.750–16 F 2
– 3 NAS815–4A . PLUG, PROTECTIVE, 0.438–20 F ALT
6 6840364–3 . PLUG, PROTECTIVE, 0.375–24 F 1
8 6800193–167 . CAP, PROTECTIVE, 0.438–20 F 4
9 23030799–16 . PLUG, PROTECTIVE, ELECTRICAL CONNECTOR F 1
– 10 6800218–325 . PLUG, PROTECTIVE, 0.750–16 F ALT
11 6800088–10 . COVER, PLASTIC F 1
12 6800088–16 . COVER, PLASTIC F 1
R – 13 6800088–17 . COVER, PLASTIC (FRO 6800088–3) F 1
R 13 6800088–3 . COVER, PLASTIC F 1
14 6859823 . COVER ASSY, STARTER GENERATOR F 1
14 A 23052955 . GASKET, STARTER GENERATOR PAD F 1
15 MS21044N5 . NUT, 0.3125–24 F 4
16 MS9320–11 . WASHER, 0.312 IN. (7.93 MM) ID F 4
–––*–––
17 AN100043 . COVER, ENGINE ACCESSORY DRIVE F 2
– 17 AS3221 . COVER, ENGINE ACCESSORY DRIVE F ALT
18 MS21043–4 . NUT, SLFLKG, 0.250–28 F 8
20 23052954 . GASKET, ENGINE ACCESSORY DRIVE F 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
21 6893698 . COVER, COMPR BLEED, PAD F 1

22 MS9217–05 . BOLT, 0.190–32 X 0.438 IN. (11.112 MM) F 3
– 23 23007167 . GASKET, COMPRESSOR BLEED, PAD (FRO 23068249) F 1
23 23068249 . GASKET, COMPRESSOR BLEED, CRES F 1
24 6894075 . BRACKET, SHIPPING ELECTRICAL HARNESS F 1
25 AN3–3A . BOLT, 0.190–32 X 0.468 IN. (11.89 MM) F 2
– 25 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) F ALT
26 AN960–10 . WASHER, 0.190 IN. (4.826 MM) ID F 2
–––*–––
27 6866246 . TAG, FUEL CONTROL PRESERVATION F 1
– 28 23057500 . OIL, LUBE, F AR
– 29 23057501 . OIL, LUBE, GR 10 F AR
– 30 23057503–16 . DESICCANT F 2
– 31 6800287 . ENVELOPE, ENGINE RECORDS F 1
– 32 23009891 . EMBLEM, PRESSURE SENSITIVE, ALLISON F 2
– 33 23057504–01 . COMPOUND, CORROSION PREVENTATIVE, F AR
– 34 23057504–02 . INK, MARKING, A–A–208 F AR
35 6897266 . CONTAINER ASSY, SHIPPING, ENGINE F 1
(V94231 P/N 014660)
36 6800193–164 . CAP, PROTECTIVE, 0.375–24 F 1
37 NAS820–14–14S . PLUG, PROTECTIVE, ELECTRICAL CONNECTOR F 1
– 38 23057507 . SEAL, LEAD, IN F AR
– 39 23057506–02 . LABEL, DOMESTIC ADDRESS F 1
– 40 23057510 . NAIL, 9 PENNY, CEMENT COATED F AR
– 41 23057511–01 . PLYWOOD, FLAT PANEL, NN–P–530 F AR
– 42 23057512–01 . TAPE, PRESSURE SENSITIVE, 1 IN. WIDE F AR
– 43 23030799–10 . CAP, PROTECTIVE ELECTRICAL CONN F 1
(SB 6897953–10)
43 6897953–10 . CAP, PROTECTIVE ELECTRICAL CONNECTOR, 0.625 F 1
– 44 NAS816–29 . CAP, PROTECTIVE PLAIN TUBE F 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
– 45 23057533 . LOGBOOK, TURBOSHAFT F 1

– 46 23058547 . LOGBOOK, SPARE PAGES, ENGINE, WHITE F AR
– 47 23058831 . LOGBOOK, SPARE PAGES, COMPR, BLUE F AR
– 48 23055354 . LOGBOOK, SPARE PAGES, GEARBOX, CANARY F AR
– 49 23055355 . LOGBOOK, SPARE PAGES, TURBINE, CHERRY F AR
– 50 23055356 . LOGBOOK, SPARE PAGES, ACCESSORY, BEIGE F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
72-05-00
FIGURE 4
PAGE 5
DEC 15/01
COMPRESSOR ASSY (PART I)

FIGURE 1
72-30-00
FIGURE 1
PAGE 0
DEC 15/01
UNITS
1234567 CODE ASSY
1 COMPRESSOR ASSY (PART I)
– 1 23005250 COMPRESSOR ASSY (REF 250 CEB A–72–3081) ABCD 1

(R&R 23033193, PER 250 CEB 72–3158)
(R&R 23052270, PER 250 CEB 72–3176)
– 1 23033193 COMPRESSOR ASSY ABCD 1
(R&R 23051643, PER 250 CEB 72–3176)
– 1 23051643 COMPRESSOR ASSY ABCD 1
(REF 72–00–00, FIG. 1, 2 OR 3 FOR NHA)
(FRO 23065557 FOR BOEING 250–C30(HU) APPL ONLY)
– 1 23065557 COMPRESSOR ASSY A 1
(REF 72–00–00, FIG. 1, 2 OR 3 FOR NHA)
– 1 23052270 COMPRESSOR ASSY (SERV REIDENT OF 23005250 ABCD 1
WHEN MODIFIED, PER 250 CEB 72–3176)
– 1 23051609 COMPRESSOR ASSY E 1
(R&R 23053310, PER 250 CEB 72–3176)
– 1 23053310 COMPRESSOR ASSY (FRO 23056635) E 1
– 1 23056635 COMPRESSOR ASSY (REF 72–00–00, FIG. 1 FOR NHA) EF 1
2 6889352 . PLATE ASSY, IDENTIFICATION, COMPRESSOR 1
– 2 A 23009663 . . PLATE, IDENTIFICATION, COMPRESSOR, BLANK 1
(SB 23064037, REF 250 CEB 72–3176)
R – 2 A 23064037 . . PLATE, IDENT, COMPR, BLANK (SB 23073665) 1
R – 2 A 23073665 . . PLATE, IDENT, COMPR, BLANK 1
3 MS21043–3 . NUT, 0.190–32 3
4 AN960C10L . WASHER, 0.190 IN. (4.826 MM) ID 3
–––*–––
– 5 6873964 . BODY ASSY, OIL PRESSURE REDUCER AD 1
(SB 6898989, PER 250 CEB 72–3004)
– 5 6898989 . BODY ASSY, OIL PRESSURE REDUCER 1
(FRO 23068215)
5 23068215 . BODY ASSY, OIL PRESSURE REDUCER 1
6 6873905 . . RING, RETAINING, 0.219 IN. (5.563 MM) OD 1
– 7 6873658 . . RESTRICTOR, PRESSURE OIL (UIA 6873964) AD 1
7 6898986 . . RESTRICTOR, PRESSURE OIL (UIA 6898989) 1
– 7 23068214 . . RESTRICTOR, PRESSURE OIL (UIA 23068215) 1
8 6873659 . . BODY, OIL PRESSURE REDUCER (UIA 6873964) AD 1
– 8 6898987 . . BODY, OIL PRESSURE REDUCER (UIA 23068215) 1
9 AS3084–03 . PACKING, 0.301 IN. (7.645 MM) ID 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 1/00
UNITS
1234567 CODE ASSY
10 6896407 . SUPPORT ASSY, COMPRESSOR FRONT 1

– 10 A 23065579 . FITTING, SUPPORT ASSY, COMPRESSOR FRONT AR
11 MS21043–3 . NUT, 0.190–32 ABCD 1
12 6849468–0805 . BOLT, INT, 0.164–36 X 0.438 IN. (11.13 MM) ABCD 5
– 12 6849468–0805 . BOLT, INT, 0.164–36 X 0.438 IN. (11.13 MM) EF 4
13 6849468–0809 . BOLT, INT, 0.164–36 X 0.688 IN. (17.48 MM) ABCD 1
– 13 6849468–0809 . BOLT, INT, 0.164–36 X 0.688 IN. (17.48 MM) EF 2
–––*–––
14 6898613 . BRACKET, 90° (REF 250 CEB 72–3014) 1
14 A 23051147 . BRACKET, 90° (REF 250 CEB 72–3014) EF 1
15 6898824 . MANIFOLD ASSY, SHROUD, BLEED AIR 1
(SB 23061239 ON BOEING 250–C30(HU) APPL ONLY,
PER 250 CEB 72–3213)
– 15 23061239 . MANIFOLD ASSY, SHROUD, BLEED AIR AC 1
(BOEING 250–C30(HU) APPL)
(REF 250 CEB 72–3213)
(SERV REL IN LIMITED QUANTITIES,
PER RFSE 250–96–10 ON 250–C30M)
16 6898748 . SEAL, SHROUD MANIFOLD 1
(REF 250 CEB 72–3242)
R 18 6893030 . HOUSING, BEARING, FRONT, COMPRESSOR AD 1
(REF 250 CEB 72–3052)
(SB 23009591, PER 250 CEB 72–3242)
– 18 23005217 . HOUSING, BEARING, FRONT, COMPRESSOR ABCD 1
(UW 6898607 BEARING)
(SB 23009591, PER 250 CEB 72–3242)
– 19 23009591 . HOUSING, BEARING, FRONT, COMPRESSOR 1
(UW 23035262 BEARING)
(SB 23062751, PER 250 CEB 72–3242)
(UW 23035262 BEARING, 23050814 PIN)
(SB 23062751 OR 23065801,
PER 250 CEB 72–3218, 72–3242)
(UW 23035262 BEARING, 23066715 PIN)
(REF 250 CEB 72–3218)
(SB 23062751, PER 250 CEB 72–3242)
19 23062751 . HOUSING, BEARING, FRONT, COMPRESSOR 1
(UW 23066716 BEARING, 23066715 PIN)
(REF 250 CEB 72–3242)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
20 6820285 . RING, RETAINING, INTERNAL (FRO 23059594) 1
– 20 23059594 . RING, RETAINING, INTERNAL 1
–––*–––
21 6876315 . DAMPER, VIBRATION, COMPR FRONT BEARING ABCD 1
(DISC., PER 250 CEB 72–3242)
22 6878447 . SPRING, COMPRESSION, 0.935 OD X 0.758 IN. ABCD 1
(23.749 X 19.253 MM) (DISC., PER 250 CEB 72–3242)
23 6878446 . CUP, SPRING (FRO 23004534) AD 1
(DISC., PER 250 CEB 72–3242)
– 23 23004534 . CUP, SPRING (DISC., PER 250 CEB 72–3242) ABCD 1
24 6875047 . NUT, HEX, 0.375–24 AD 1
(SB 23004538, PER 250 CEB 72–3046)
(DISC., PER 250 CEB 72–3242)
– 24 6890472 . NUT, HEX, 0.375–24 AD ALT
(SB 23004538, PER 250 CEB 72–3046)
(DISC., PER 250 CEB 72–3242)
25 23004538 . NUT, HEX, BLACK NYLON CAP, 0.375–24 1
(REF 250 CEB 72–3242)
26 6876600 . BEARING, BALL, 10 X 26 X 8 MM (UIA 23005217) AD 1
(SB 6898607, PER 250 CEB 72–3046)
(DISC., PER 250 CEB 72–3242)
– 26 6898607 . BEARING, BALL, 10 X 26 X 8 MM (UIA 23005217) 1
(DISC., PER 250 CEB 72–3242)
– 27 23035262 . BEARING, ROLLER, FRONT COMPRESSOR 1
(UW 23065824 & 23065801 BEARING HOUSINGS)
(REF 250 CEB 72–3218)
(SB 23066716, PER 250 CEB 72–3242)
27 23066716 . BEARING, ROLLER, FRONT COMPRESSOR 1
(UW 23062751 BEARING HOUSING, 23066715 PIN)
(REF 250 CEB 72–3242)
– 28 23050814 . PIN, HEADED, 0.125 DIA X 0.200 LG (3.17 X 5.08 MM) 1
(UW 23009591, 23065824 BEARING HOUSINGS,
23035262 BEARING)
(SB 23066715, PER 250 CEB 72–3218, 72–3242)
28 23066715 . PIN, HEADED, 0.125 DIA X 0.200 LG (3.17 X 5.08 MM) 1
(UW 23065801, 23062751 BEARING HOUSINGS)
(REF 250 CEB 72–3242)
29 6871902 . SEAL, MATING RING, FRONT COMPRESSOR 1
– 29 23004514 . SEAL, MATING RING, FRONT COMPRESSOR ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY

(QTY 2 REQD WITH 23062751)
31 6887619 . SEAL, BEARING OIL, 0.625 DIA X 0.531 IN. 1
(15.875 X 13.487 MM)
(USE KIT 23009626 FOR OVERHAUL)
– 31 23004513 . SEAL, PLAIN, ENCASED, 0.625 DIA ALT
(USE KIT 23008014 FOR OVERHAUL)
32 85–2582 . . SPRING, CONICAL (V91587) (UIA 6887619) 1
– 32 025–0092–050 . . SPRING, CONICAL (V09456) (UIA 23004513) ALT
33 69PA017VIT70 . . SEAL, O–RING (V91587) (UIA 6887619) 1
– 33 23051064 . . SEAL, O–RING (UIA 6887619) AR
– 33 1–0016–039 . . SEAL, O–RING (V09456) (UIA 23004513) ALT
– 33 23051058 . . SEAL, O–RING (UIA 23004513) AR
34 00–062106 . . SEAL RING ASSY (V91587) (UIA 6887619) 1
– 34 035–0092–051 . . SEAL RING ASSY (V09456) (UIA 23004513) ALT
35 046–0086–050 . . RING, RETAINING (V09456) (UIA 23004513) 1
– 35 23009590 . . RING, RETAINING (UIA 23004513) AR
(SERV REPAIR PART FOR 046–0086–050)
– 35 12–093010 . . RING, RETAINING (V91587) (UIA 6887619) ALT
– 35 23009586 . . RING, RETAINING (UIA 6887619) AR
(SERV REPAIR PART FOR 12–093010)
– 36 6892312 . SEAL KIT (REPAIR KIT FOR 6887619 SEAL) AR
(KIT CONTAINS 85–2582, 69PA017VIT70 &
00–062106) (FRO 23009626) (DISC.)
(KIT CONTAINS 85–2582, 69PA017VIT70,
00–062106 & 12–093010)
(KIT CONTAINS 025–0092–050, 1–0016–039,
035–0092–051 & 046–0086–050)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 1/00
UNITS
1234567 CODE ASSY
– 37 6896888 . SCROLL ASSY, COMPRESSOR (REF 250 CEB 72–3030) 1

(R&R 23053990, PER 250 CEB 72–3184)
– 37 23053990 . SCROLL ASSY, COMPRESSOR 1
(R&R 23064577, PER 250 CEB 72–3239)
R – 37 23064577 . SCROLL ASSY, COMPRESSOR 1
(SB 23072848 OR 23072862, PER 250 CEB 72–3250)
(UW 23065569 TUBE ASSY)
(SB 23072862 OR 23074076,
PER 250 CEB A–72–3247)
(SB 23072862 OR 23074076,
PER 250 CEB A–72–3247)
R 37 23072862 . SCROLL ASSY, COMPRESSOR 1
(REF 250 CEB A–72–3247)
(FOR SERV REIDENT OF 23066737 OR 23072848)
(REF 250 CEB A–72–3247)
– 37 23033126 . BAFFLE, SUB–ASSY, COMPRESSOR 1
(SERV REPAIR PART FOR 6896888)
38 MS21043–3 . NUT, 0.190–32 51
–––*–––
39 6876021 . . STUD, WELDING, PERCUSSION, 0.190–32 30
– 40 23033126 . BAFFLE, SUB–ASSY, COMPR (SERV REPAIR PART) AR
– 41 6898722 . HOUSING ASSY, SHROUD, COMPRESSOR ABCD 1
(ALUMINUM POLYESTER) (FRO 23004210)
(R&R 23005249, PER 250 CEB 72–3147)
(R&R 23051137, PER 250 CEB 72–3171)
(ALUMINUM POLYESTER) (FRO 23005249)
(R&R 23005257, PER 250 CEB 72–3147)
(R&R 23038162, PER 250 CEB 72–3171)
– 41 23008566 . HOUSING ASSY, SHROUD, COMPRESSOR 1
(ALUMINUM GRAPHITE) (SB 23008553)
(REF 250 CEB 72–3093)
(R&R 23005249, PER 250 CEB 72–3147)
(R&R 23051137, PER 250 CEB 72–3171)
(R&R 23061907, PER 250 CEB 72–3176)
(FOR SERV USE & SPARE PARTS PROC
ON C30G & C30G/2)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 1/00
UNITS
1234567 CODE ASSY

(ALUMINUM GRAPHITE) (FRO 23039792)
(REF 250 CEB 72–3093)
(R&R 23005257, PER 250 CEB 72–3147)
(R&R 23038162, PER 250 CEB 72–3171)
(R&R 23061907, PER 250 CEB 72–3176)
– 41 23005249 . HOUSING ASSY, SHROUD, COMPRESSOR ABCD AR
(ALUMINUM POLYESTER)
(REF 250 CEB’S 72–3093 & 72–3147)
(R&R 23051137, PER 250 CEB 72–3171)
– 41 23005257 . HOUSING ASSY, SHROUD, COMPRESSOR ABCD AR
(ALUMINUM POLYESTER)
(REF 250 CEB’S 72–3093 & 72–3147)
(R&R 23038162, PER 250 CEB 72–3171)
– 41 23039792 . HOUSING ASSY, SHROUD, COMPRESSOR ABCDE 1
(ALSEAL) (R&R 23052389, PER 250 CEB 72–3191)
– 41 23052389 . HOUSING ASSY, SHROUD, COMPRESSOR 1
(ALSEAL) (SERV REIDENT OF 23039792)
(R&R 23056637, PER 250 CEB 72–3176)
(FOR SERV USE ON C30(HU) ENGINES
USED ON MILITARY MD530 AIRCRAFT)
– 41 23051644 . HOUSING ASSY, SHROUD, COMPRESSOR (ALSEAL) 1
(R&R 23056636, PER 250 CEB 72–3191)
(R&R 23056637, PER 250 CEB 72–3200)
ON C30G/2, REF 250 CEB 72–3191)
(R&R 23056637, PER 250 CEB 72–3200)
(R&R 23063398, PER 250 CEB 72–3224)
41 23063398 . HOUSING ASSY, SHROUD, COMPRESSOR (XPT) 1
– 41 23038162 . HOUSING ASSY, SHROUD, COMPRESSOR ABCDE AR
(ALSEAL METCO 444) (REF 250 CEB 72–3171)
(R&R 23061906, PER 250 CEB 72–3176)
(FOR SERV USE & SPARE PARTS PROC ON C30G)
(R&R 23061906, PER 250 CEB 72–3176)
(FOR SERV USE & SPARE PARTS PROC ON –C30G)
(ALSEAL METCO 444)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 1/00
UNITS
1234567 CODE ASSY
– 41 23052267 . HOUSING ASSY, SHROUD, COMPRESSOR AR

(R&R 23057144, PER 250 CEB 72–3191,
250–C30G/2 ENGINES ONLY)
(R&R 23061906, PER 250 CEB 72–3200)
(ALUMINUM GRAPHITE)
(R&R 23061907, PER 250 CEB 72–3200)
(ALUMINUM GRAPHITE)
(R&R 23061907, PER 250 CEB 72–3200)
(ALUMINUM GRAPHITE)
– 41 23057144 . HOUSING ASSY, SHROUD, COMPRESSOR F AR
(ALSEAL & METCO 444)
(FOR SERV REIDENT OF 23052267)
(ALSEAL WITH METCO 444)
42 6859509–01 . . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) 6
– 42 6859510–01 . . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) ALT
– 42 6859511–01 . . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) ALT
– 42 23006590–01 . . NUT, SLFLKG, SHANK, 0.164–36 6
– 43 6895804 . ADAPTER, FLANGE, SCROLL TO AIR TUBE 2
(SB 23004563, PER 250 CEB 72–3091)
– 43 23004563 . ADAPTER, FLANGE, SCROLL TO AIR TUBE 2
(REF 250 CEB 72–3091) (FRO 23009568)
43 23009568 . ADAPTER, FLANGE, SCROLL TO AIR TUBE 2
44 MS9555–06 . SCREW, 12 PT HD, 0.164–36 X 0.500 IN. (12.7 MM) 12
–––*–––
45 6859509–01 . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) 12
– 45 6859510–01 . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) ALT
– 45 23006590–01 . NUT, SLFLKG, SHANK, 0.164–36 12
(UIA 6895804 & 23004563)
– 45 6828832–836 . NUT, SLFLKG, HEX HD, 0.164–36 (UIA 23009568) 12
– 45 6843619–86 . NUT, SLFLKG, HEX HD, 0.164–36 ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 1/00
COMPRESSOR ASSY (PART II)

FIGURE 2
72-30-00
FIGURE 2
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
2 COMPRESSOR ASSY (PART II)
FIG. REF COMPRESSOR ASSY (REF 73–20–00, FIG. 2) REF

1 6871162 . SHIM, TABBED, 0.260 ID X 0.630 OD X 0.002 IN. AR
(6.604 X 16.002 X 0.051 MM)
– 1 23004212 . SHIM, TABBED, 0.325 ID X 0.630 OD X 0.002 IN. ALT
(8.255 X 16.002 X 0.051 MM)
(8.256 X 16.002 X 0.102 MM)
(8.256 X 16.000 X 0.203 MM)
– 2 AS3085–041 . PACKING, 2.989 IN. (75.92 MM) ID (FRO 23056103) 1
R – 2 23056103 . PACKING, 3.176 IN. (80.67 MM) ID (FRO 6851501–57) 1
R 2 6851501–57 . PACKING, 3.176 IN. (80.67 MM) ID 1
3 6893015–1 . ORIFICE, 0.388 IN. (9.855 MM) (UIA 23005250) 1
(DISC., PER 250 CEB 72–3158)
– 3 6893015–1.5 . ORIFICE, 0.434 IN. (11.024 MM) (UIA 23005250) (DISC.) AR
– 3 6893015–2 . ORIFICE, 0.475 IN. (12.065 MM) (UIA 23005250) (DISC.) AR
4 MS21043–3 . NUT, SLFLKG, 0.190–32 1
5 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) 1
6 MS122910 . CLAMP, 0.204 IN. (5.18 MM) 1
(ADDED, PER 250 CEB 72–3158)
(S P/N MS9825–11 PER 250 CEB 72–3158)
(S P/N 23039030–11 PER 250 CEB 72–3158)
–––*–––
– 7 6893014 . TUBE, COMPRESSOR VENT 1
(SB 23009648, PER 250 CEB 72–3158)
7 23009648 . TUBE, COMPRESSOR VENT 1
– 8 6896021 . MOUNT ASSY, COMPRESSOR (SB 6898611 A 1
OR 23007217, PER 250 CEB 72–3005 & 3077)
(REF 250 CEB A–72–3081)
– 8 6898966 . MOUNT ASSY, COMPRESSOR (SB 6898611 A 1
OR 23007217, PER 250 CEB 72–3005 & 3067)
(REF 250 CEB A–72–3081)
– 8 6898611 . MOUNT ASSY, COMPRESSOR (SB 23007217, PER ABCD 1
250 CEB 72–3085) (REF 250 CEB A–72–3081)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
DEC 15/01
UNITS
1234567 CODE ASSY
R – 8 23051123 . MOUNT ASSY, COMPRESSOR 1

(REF 250 CEB 72–3176) (FRO 23007217)
R 8 23007217 . MOUNT ASSY, COMPRESSOR 1
(REF 250 CEB 72–3176) (UW 23066669 DIFFUSER)
9 23051099 . COVER, DIFFUSER, MANIFOLD (DISC.) 1
10 MS21043–3 . NUT, SLFLKG, 0.190–32 24
–––*–––
– 11 6896025 . SUPPORT ASSY, COMPRESSOR REAR ABCD 1
(UW 6898711 DIFFUSER ASSY)
(R&R 23007196, PER 250 CEB 72–3078)
– 11 23007196 . SUPPORT ASSY, COMPRESSOR REAR ABCDE 1
(UW 23007210 DIFFUSER ASSY)
(R&R 23051122, PER 250 CEB 72–3176)
(REF 250 CEB 72–3185)
– 11 23051122 . SUPPORT ASSY, COMPRESSOR REAR 1
(R&R 23055455, PER 250 CEB 72–3185)
R – 11 23055455 . SUPPORT ASSY, COMPRESSOR REAR 1
(R&R 23064577, PER 250 CEB 72–3240)
11 23064593 . SUPPORT ASSY, COMPRESSOR REAR 1
12 6896058 . . PIN, STEPPED, 0.125 X 0.062 X 0.208 IN. 1
(3.1750 X 1.575 X 5.283 MM) (UIA 6896025)
– 13 6898711 . DIFFUSER ASSY, COMPRESSOR ABCD 1
(UW 6896025 SUPPORT ASSY)
(R&R 23007210, PER 250 CEB 72–3078)
– 13 23007210 . DIFFUSER ASSY, COMPRESSOR ABCDE 1
(R&R 23051119, PER 250 CEB 72–3176)
– 13 23051119 . DIFFUSER ASSY, COMPRESSOR (FRO 23066669) 1
R 13 23066669 . DIFFUSER ASSY, COMPRESSOR 1
(UW 23007217 MOUNT ASSY)
14 6876741 . . STUD, WELDING, PERCUSSION, 0.190–32 48
15 23007190 . . PIN, STEPPED, 0.106 X 0.082 X 0.244 IN. 1
(2.69 X 2.08 X 5.69 MM) (UIA 23007210 & 6898711)
– 16 6893002 . BEARING, BALL, 30 X 72 X (22) 19 MM (FRO 6898606) 1
– 16 6898606 . BEARING, BALL, 30 X 72 X (22) 19 MM (FRO 23009670) 1
16 23009670 . BEARING, BALL, 30 X 72 X (23) 19 MM 1
17 6893614 . NUT, SPANNER, 1.1875–28 LH 1
18 6748072–283 . RING, RETAINING 1
19 6893011 . KEY, BEARING LOCK 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 15/99
UNITS
1234567 CODE ASSY
20 6820512–1 . SHIM, 1.400 OD X 1.190 ID X 0.004 IN. AR

(35.56 X 30.226 X 0.102 MM)
– 20 6820512–2 . SHIM, 0.006 IN. (0.152 MM) AR
– 20 6820512–3 . SHIM, 0.010 IN. (0.254 MM) AR
– 20 6820512–4 . SHIM, 0.003 IN. (0.076 MM) AR
21 6893008 . SLINGER, OIL, COMPRESSOR REAR BEARING 1
22 23005279 . ROTOR ASSY, COMPRESSOR 1
23 6893031 . . SEAL, COMPR ROTOR REAR (REF 250 CEB 72–3070) 1
– 24 23005271 . . ADAPTER, SPLINE, COMPRESSOR ROTOR 1
(FRO 23005271–1)
24 23005271–1 . . ADAPTER, SPLINE, COMPRESSOR ROTOR 1
– 24 23005271–2 . . ADAPTER, SPLINE, COMPRESSOR ROTOR AR
– 24 23005271–3 . . ADAPTER, SPLINE, COMPRESSOR ROTOR AR
25 6823169 . . NUT, HEX, 0.250–28 (REF 250 CEB 72–3059) 1
–––*–––
– 26 6896890 . . IMPELLER ASSY, COMPRESSOR (UIA 6898585) AD 1
(R&R 6899245, PER 250 CEB 72–3042)
– 26 6899245 . . IMPELLER ASSY, COMPRESSOR (FRO 23030976) 1
(REF 250 CEB’S 72–3042 & 72–3059) (FOR SERV USE
& SPARE PARTS PROC ON 250–C30G & C30G/2)
26 23030976 . . IMPELLER ASSY, COMPR (UIA 6899360 OR 23005279) 1
27 6889351–1 . . . STUD, 0.250–28 X 0.250–28 X 0.870 IN 1
(22.098 MM) (0.0011 IN. US.)
– 27 6889351–2 . . . STUD (STANDARD) AR
– 27 6889351–3 . . . STUD (0.0011 IN. OS) AR
– 27 6889351–4 . . . STUD (0.0022 IN. OS) AR
– 27 6889351–5 . . . STUD (0.0033 IN. OS) AR
– 27 6889351–6 . . . STUD (0.0044 IN. OS) AR
– 28 23005276 . GEARSHAFT ASSY, SPUR ADAPTER 1
(R&R 23008070, PER 250 CEB 72–3100)
(FRO 23008090) (ADDED, PER 250 CEB 72–3059)
(ADDED, PER 250 CEB 72–3059) (FRO 23056634)
R – 28 23056634 . GEARSHAFT ASSY, SPUR ADAPTER (FRO 23073520) 1
R 28 23073520 . GEARSHAFT ASSY, SPUR ADAPTER (UW 23073521) 1
(REL IN LIMITED QTYS, PER RFSE 250–99–2)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY
29 6726656–96 . RING, RETAINING, INTERNAL 1
(ADDED, PER 250 CEB 72–3059)
–––*–––
– 30 23005270 . . GEARSHAFT, SPUR ADAPTER 1
(R&R 23008029, PER 250 CEB 72–3100)
(FRO 23008089) (ADDED, PER 250 CEB 72–3059)
(ADDED, PER 250 CEB 72–3059) (FRO 23056633)
R – 30 23056633 . . GEARSHAFT, SPUR ADAPTER (FRO 23073521) 1
R 30 23073521 . . GEARSHAFT, SPUR ADAPTER (UIA 23073520) 1
31 23005267 . . RACE, BEARING, INNER 1
(ADDED, PER 250 CEB 72–3059)
32 23005274 . RING, PISTON–SPLIT SEAL 1
(ADDED, PER 250 CEB 72–3059)
(REF 250 CEB 72–3108)
(ADDED, PER 250 CEB 72–3059)
(REF 250 CEB A–72–3134 & A–72–3135)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 1/00
72-30-00
FIGURE 2
PAGE 5
SEP 1/98
COMBUSTION SECTION
FIGURE 1
72-40-00
FIGURE 1
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
1 COMBUSTION SECTION
FIG. REF ENGINE ASSY, AIRCRAFT, TURBOSHAFT REF

(REF 72–00–00, FIG. 1, 2 & 3)
– 1 6895800 . TUBE ASSY, COMPRESSOR DISCHARGE 2
(FRO 23064612)
1 23064612 . TUBE ASSY, COMPRESSOR DISCHARGE 2
2 MS9088–09 . BOLT, 0.190–32 X 0.688 IN. (17.48 MM) 2
3 MS21043–3 . NUT, 0.190–32 2
4 MS9489–10 . BOLT, 0.190–32 X 0.750 IN. (19.05 MM) 2
5 6892313 . BRACKET, AIR TUBE, OUTER 2
6 6892314 . BRACKET, AIR TUBE, INNER 2
7 MS9555–07 . SCREW, 12 PT HD, 0.164–36 X 0.562 IN. (14.28 MM) 12
R 8 6898605 . PLATE, DOUBLER, AIR TUBE FLANGE 4
(REF 250 CEB 72–3018)
9 6895805 . WASHER, ALIGNMENT, AIR TUBE 2
–––*–––
– 10 23039784 . . FLANGE, FORWARD, COMPRESSOR DISCHARGE 1
AIR TUBE (FOR SERV USE & SPARES PROC)
– 11 23038185 . . FLANGE, FORWARD AR
– 12 23038195 . . FLANGE, FORWARD AR
13 6898657 . RING, SEAL, COMPRESSOR DISCHARGE TUBE 2
R 14 6889096 . PISTON RING, SPLIT SEAL, 2.800 IN. (71.12 MM) OD 4
(USE WITH 23064612 TUBE ASSY)
R 14 A 6889096 . PISTON RING, SPLIT SEAL, 2.800 IN. (71.12 MM) OD 2
R 15 23065485 . PACKING, BRAIDED CERAMIC ROPE 2
16 6854255 . VALVE ASSY, BURNER DRAIN 2
– 18 6898906 . CASE ASSY, OUTER, COMBUSTION AD 1
(R&R 6899237, PER 250 CEB 72–3010)
– 18 6899237 . CASE ASSY, OUTER, COMBUSTION ABCD 1
(R&R 23030910, PER 250 CEB A–72–3115)
– 18 23009569 . CASE ASSY, OUTER, COMBUSTION ABCD 1
(R&R 23030911, PER 250 CEB A–72–3115)
– 18 23030910 . CASE ASSY, OUTER, COMBUSTION 1
(FRO 23030911) (FOR SERV USE &
SPARE PARTS PROC ON 250–C30G, –C30G/2)
18 23030911 . CASE ASSY, OUTER COMBUSTION 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
19 MS21043–3 . NUT, 0.190–32 24
– 20 6820055–8 . SCREW, SOCKET HD, 0.190–32 X 0.499 IN. AD 18
(12.65 MM) (ALL POSNS UNLESS SPECIFIED)
(FRO MS9432–06)
R 20 MS9432–06 . BOLT, TEE HEAD, 0.190–32 X 0.500 IN. (12.7 MM) 14
(ALL POSNS UNLESS SPECIFIED) (FRO MS9432–07)
21 23039030–03 . CLAMP, CUSHIONED, 0.250 IN. (6.35MM) ID (POSN 6) 1
(14.28 MM) (POSNS NO. 9, 10, 11, 15, 16 & 17)
(FRO MS9432–07)
R 22 MS9432–07 . BOLT, TEE HEAD, 0.190–32 X 0.562 IN. (14.28 MM) 24
(ALL POSNS UNLESS OTHERWISE SPECIFIED)
–––*–––
– 23 6859509–01 . NUT, SLFLKG, SHANK, 0.164–36 (FRO 23006590–01) 12
– 23 23006590–01 . NUT, SLFLKG, SHANK, 0.164–36 12
(UIA 6898906 & 6899237)
23 6828832–836 . NUT, SLFLKG, HEX HD, 0.164–36 12
(UIA 23009569, 23030910 OR 23030911)
– 24 6899215 . . DOUBLER, IGNITER PLUG (SERV REPAIR PART) 2
– 25 6899216 . . DOUBLER, FUEL NOZZLE (SERV REPAIR PART) 1
– 26 6899217 . . TAB, LOCKWIRE (SERV REPAIR PART) 3
– 27 23051100 . LINER ASSY, COMBUSTION (FRO 6899081) 1
– 27 6899081 . LINER ASSY, COMBUSTION 1
(SB 23066675, PER 250 CEB 72–3227)
(REF 250 CEB A–72–3229)
27 23066675 . LINER ASSY, COMBUSTION 1
– 27 23066685 . LINER ASSY, COMBUSTION AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 28 23003108 . . SPACER, CORRUGATED, 1ST SECTION 1

(SERV REPAIR PART)
– 29 23003109 . . CHAMBER, PRIMARY COMBUSTION, 2ND SECTION 1
(SERV REPAIR PART)
– 30 23003110 . . SPACER, CORRUGATED, 2ND SECTION 1
(SERV REPAIR PART)
– 31 23003111 . . SPACER DETAIL, COMBUSTOR (SERV REPAIR PART) 6
– 32 23004528 . . FERRULE SUBASSY, SWIRLER & INJECTOR AR
(SERV REPAIR PART)
– 33 23007531 . . FERRULE, IGNITER, COMBUSTION LINER AR
(SERV REPAIR PART)
– 34 23004560 . . SHIELD, WATER, COMBUSTION LINER AR
(SERV REPAIR PART)
– 35 23004562 . . CHAMBER, PRIMARY COMBUSTION, 1ST SECTION AR
(SERV REPAIR PART)
– 36 23007007 . . DILUTION CHAMBER ASSY, COMBUSTION LINER AR
(SERV REPAIR PART)
R – 37 23069763 . . DOUBLER & STOP SUB–ASSY AR
R – 38 23069764 . . CHAMBER, DILUTION AR
R – 39 23069765 . . CHAMBER, PRE–IGNITION SUB–ASSY AR
R – 40 23069766 . . FERRULE, IGNITER – RETAINER AR
R – 41 23069767 . . FERRULE, IGNITER AR
R – 42 23069768 . . RING & SWIRLER SUB–ASSY AR
R – 43 23069769 . . RETAINER, DEFLECTOR CUP AR
R – 44 23069770 . . CUP, DEFLECTOR AR
R – 45 23069778 . . BAND, RESTRICTOR AR
R – 46 23069779 . . SPACER, DETAIL AR
R – 47 23069780 . . SHIELD, WATER DETAIL AR
R – 48 23069781 . . CHAMBER, PRE–IGNITION SUB–ASSY AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
TURBINE ASSY (EXTERNAL PART I)

FIGURE 1
72-50-00
FIGURE 1
PAGE 0
NOV 15/99
UNITS
1234567 CODE ASSY
1 TURBINE ASSY (EXTERNAL PART I)
– 1 6898685 TURBINE ASSY, GAS PRODUCER & POWER AD 1

(R&R 23004540, PER 250 CEB 72–3068)
(REF 250 CEB 72–3101)
– 1 23004540 TURBINE ASSY, GAS PRODUCER & POWER ABCD 1
(R&R 23008490 ON 250–C30, C30P, & C30S
ENGINES, PER 250 CEB 72–3101)
(REF 250 CEB A–72–3127 & 250 CEB A–72–3128)
(R&R 23031925, PER 250 CEB A–72–3128)
(R&R 23033195, PER 250 CEB 72–3158)
(R&R 23031493, PER 250 CEB 72–3190)
(R&R 23031493, CUSTOMER OPTION,
PER 250 CEB 72–3199)
(R&R 23035128 ON C30P, PER 250 CEB 72–3158)
(REF 250 CEB 72–3190)
(R&R 23035128, PER 250 CEB 72–3190)
PER 250 CEB 72–3199)
– 1 23035128 TURBINE ASSY, GAS PRODUCER & POWER 1
(REF 72–00–00, FIGS. 1, 2 OR 3 FOR NHA)
(SB 23062032 ON 250–C30G/2 ENGINES ONLY,
REF 250 CEB 72–3203)
(FRO 23066662 BOEING 250–C30(HU) APPL ONLY)
– 1 23066662 TURBINE ASSY, GAS PRODUCER & POWER A 1
(REF 72–00–00, FIGS. 1, 2 OR 3 FOR NHA)
– 1 23062032 TURBINE ASSY, GAS PRODUCER & POWER F 1
(REF 72–00–00, FIG. 2 FOR NHA)
2 23004212 . SHIM, TABBED, 0.325 ID X 0.630 OD X 0.002 IN. AR
(8.26 X 16.00 X 0.05 MM)
– 2 23008001 . SHIM, TABBED, 0.325 ID X 0.630 OD X 0.004 IN. AR
(8.26 X 16.00 X 0.10 MM)
– 2 23008002 . SHIM, TABBED, 0.325 ID X 0.630 OD X 0.008 IN. AR
(8.26 X 16.00 X 0.20 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 1/00
UNITS
1234567 CODE ASSY
– 3 6845635 . PLATE ASSY, IDENTIFICATION, TURBINE ASSY 1

(UW 23065472 SHIELD ASSY) (SB 23066749)
3 23066749 . PLATE ASSY, IDENTIFICATION, TURBINE ASSY 1
(UW 23066696 & 23069704 SHIELD ASSYS)
– 3 A 23064040 . . PLATE, IDENTIFICATION, TURBINE, BLANK 1
(UIA 6845635) (SB 23064061)
(UIA 23066749) (REF 250 CEB 72–3219)
(SB 23073685)
– 4 AN125402 . RIVET, 0.062 X 0.188 IN. (1.58 X 4.78 MM) 4
(UW 6845635 PLATE) (SB AN117004)
4 AN117004 . SCREW, 0.164–32 X 0.375 IN. (9.53 MM) 4
(UW 23064061 PLATE) (REF 250 CEB 72–3219)
–––*–––
5 FIG. REF . FITTING, DRAIN, SCAVENGE OIL REF
(REF 72–00–00, FIG. 1, 2 OR 3)
6 FIG. REF . SUMP ASSY, SCAVENGE OIL, EXTERNAL REF
(REF 72–00–00, FIG, 1, 2 OR 3)
7 FIG. REF BOLT, 0.250–28 X 0.500 IN. (12.7 MM) REF
(REF 72–00–00, FIG. 1, 2 OR 3)
8 FIG. REF . BOLT, 0.250–28 X 2.250 IN. (57.15 MM) REF
(REF 72–00–00, FIG. 1, 2 OR 3)
–––*–––
9 6784419–8 . SEAL, 0.938 IN. (23.825 MM) OD 2
– 9 MS9372–029 . SEAL, 0.938 IN. (23.825 MM) OD ALT
10 AN924–6S . NUT, 0.563–18 1
11 AN960C916L . WASHER, 0.563 IN. (14.30 MM) ID AD 1
(UW 6899166 SHIELD ASSY)
R – 12 6899443 . COVER, FIRESHIELD COLLECTOR DRAIN 1
(FRO 23073472)
R 12 23073472 . COVER, FIRESHIELD COLLECTOR DRAIN 1
– 13 6894189 . SHIELD ASSY, FIREWALL, HORIZONTAL AD 1
(R&R 6899166, PER 250 CEB 72–3007)
– 13 6899166 . SHIELD ASSY, FIREWALL, HORIZONTAL AD 1
(R&R 6899235, PER 250 CEB 72–3024)
– 13 6899235 . SHIELD ASSY, FIREWALL, HORIZONTAL ABCD 1
(R&R 23005672, PER 250 CEB 72–3079)
(R&R 23031464, PER 250 CEB A–72–3125)
– 13 23031464 . SHIELD ASSY, FIREWALL, HORIZONTAL AD AR
(SERV REIDENT OF 6899235)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 13 23005672 . SHIELD ASSY, FIREWALL, HORIZONTAL ABCD 1

(R&R 23031438, PER 250 CEB A–72–3125)
(FRO 23033157)
– 13 23031438 . SHIELD ASSY, FIREWALL, HORIZONTAL AR
ON 250–C30G, –C30G/2)
– 13 23033157 . SHIELD ASSY, FIREWALL, HORIZONTAL 1
(FRO 23057784)
(R&R 23065472, PER 250 CEB 72–3209)
(R&R 23066696, PER 250 CEB 72–3219)
(REF 250 CEB 72–3219) (FRO 23069704)
13 23069704 . SHIELD ASSY, FIREWALL, HORIZONTAL 1
14 AN104607 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 2
–––*–––
– 16 6749213–02 . . NUT, ANCHOR, 0.190–32 (FRO MS21048–3W) 2
16 MS21048–3W . . NUT, SLFLKG, PLATE, 0.190–32 2
– 16 6890470–3 . . NUT, ANCHOR, 0.190–32 ALT
16 A MS21048–08W . . NUT, SLFLKG, PLATE, 0.164–32 4
– 16 A 6890470–08 . . NUT, ANCHOR, PLATE, 0.164–32 ALT
– 17 23009813 . . STUD, HORIZONTAL FIRESHIELD AR
(ADDED, PER 250 CEB 72–3079)
– 18 MS9732–07 . . BOLT, MACH, 0.190–32 X 0.812 IN. AR
(ALTER TO MAKE STUD, PER 250 CEB 72–3079)
(UIA 23005672)
19 FIG. REF . BLANKET, INSULATION, FIRESHIELD REF
(REF 72–00–00, FIG. 1, 2 OR 3)
20 FIG. REF . BOLT, 0.190–32 X 0.438 IN. (11.125 MM) REF
(REF 72–00–00, FIG. 1, 2 OR 3)
21 FIG. REF . WASHER, 0.190 IN. (4.826 MM) ID REF
(REF 72–00–00, FIG. 1, 2 OR 3)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY
22 AN924–4J . NUT, 0.4375–20 1

– 22 AN924–4K . NUT, 0.4375–20 ALT
23 AN960–716 . WASHER, 0.4375 IN. (11.11 MM) ID 2
24 AN833–4J . ELBOW, 0.4375–20 1
– 24 AN833–4K . ELBOW, 0.4375–20 ALT
25 23005741 . COVER, FIREWALL, ACCESSORY, BOTTOM 1
(ADDED, PER 250 CEB 72–3079)
26 23005742 . COVER, FIREWALL, ACCESSORY, SIDE 2
(ADDED, PER 250 CEB 72–3079)
27 MS21043–3 . NUT, 0.190–32 (ADDED, PER 250 CEB 72–3079) 3
–––*–––
– 28 6893077 . THERMOCOUPLE ASSY, TURBINE OUTLET 1
TEMPERATURE GAS PRODUCER (FRO 23063390)
– 28 23063390 . THERMOCOUPLE ASSY, TURBINE OUTLET 1
28 23034927 . THERMOCOUPLE ASSY, TURBINE OUTLET 1
TEMPERATURE GAS PRODUCER
29 MS9060–05 . BOLT, 0.190–32 X 0.438 IN. (11.125 MM) 8
–––*–––
– 30 6718476 . . TERMINAL, ALUMEL, 0.190–32 (DISC.) 1
– 31 6718477 . . TERMINAL, CHROMEL, 0.164–32 (DISC.) 1
– 32 6823201–17000 . . SLEEVING, FIBERGLASS BRAID (DISC.) AR
(APPROX 3 IN. 76 MM, REQD)
– 33 6823224–16000 . . SLEEVING, FIBERGLASS BRAID (DISC.) AR
– 34 6874718 . GASKET, TURBINE THERMOCOUPLE (FRO 23053263) 4
34 23053263 . GASKET, THERMOCOUPLE 4
– 35 6855369 . TERMINAL ASSY, THERMOCOUPLE (SB 23009851) 1
35 23009851 . TERMINAL ASSY, THERMOCOUPLE 1
36 MS21043–3 . NUT, 0.190–32 2
37 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) 2
–––*–––
38 6746974 . . NUT, CHROMEL, 0.164–32 1
39 6746975 . . NUT, ALUMEL, 0.190–32 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 1/00
72-50-00
FIGURE 1
PAGE 5
SEP 1/98
TURBINE ASSY (EXTERNAL PART II)

FIGURE 2
72-50-00
FIGURE 2
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
2 TURBINE ASSY (EXTERNAL PART II)
R – FIG. REF TURBINE ASSY, GAS PRODUCER & POWER REF

R 1 6892836 . TUBE ASSY, PRESSURE OIL, FIRESHIELD TO 1
POWER TURBINE SUPPORT
2 MS21043–3 . NUT, 0.190–32 1
3 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.525 MM) 1
4 MS122902 . CLAMP, 0.250 IN. (6.35 MM) ID 1
5 FIG. REF . BRACKET, ANGLE, 90° (REF 72–50–00, FIG. 4) REF
–––*–––
– 6 6840476 . SCREEN ASSY, PRESSURE OIL FITTING AD 1
(UW 6898781 NOZZLE ASSY)
(FRO 23001827) (REF 250 CEB 72–3032)
6 23001827 . SCREEN ASSY, PRESSURE OIL FITTING 1
(UW 23001832 NOZZLE ASSY)
7 23038235 . TUBE ASSY, OIL PRESSURE, GAS PRODUCER 1
TURBINE SUPPORT (REF 250 CEB 72–A–3165)
8 23035275 . FITTING ASSY, OIL PRESSURE, GAS PRODUCER 1
TURBINE SUPPORT (REF 250 CEB 72–A–3165)
9 MS9565–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) 3
–––*–––
10 6784419–3 . SEAL, 0.625 IN. (15.875 MM) OD 1
(REF 250 CEB 72–A–3165)
– 10 MS9372–019 . GASKET, 0.625 IN. (15.875 MM) OD ALT
(REF 250 CEB 72–A–3165)
11 6898976 . TEE ASSY, OIL PRESSURE, 1
POWER TURBINE SUPPORT
12 MS9565–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) 3
–––*–––
13 6784419–8 . SEAL, 0.938 IN. (23.825 MM) OD 2
– 13 MS9372–029 . SEAL, 0.938 IN. (23.825 MM) OD ALT
– 14 6898781 . NOZZLE ASSY, PRESSURE OIL, POWER TURBINE AD 1
SUPPORT (UW 6840476 SCREEN ASSY)
(FRO 23001832) (REF 250 CEB 72–3032)
14 23001832 . NOZZLE ASSY, PRESSURE OIL, POWER TURBINE 1
SUPPORT (UW 23001827 SCREEN ASSY)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
– 15 6889071 . COUPLING, TURBINE TO COMPR (FRO 23032345) AD 1

(REF 250 CEB A–72–3134)
– 15 6896895 . COUPLING, TURBINE TO COMPR (FRO 23032345) 1
(REF 250 CEB A–72–3134)
– 15 23008080 . COUPLING, TURBINE TO COMPR (SB 23032345) 1
(REF 250 CEB A–72–3134)
15 23032345 . COUPLING SHAFT, TURBINE TO COMPR 1
16 6889069 . COUPLING, TURBINE SHAFT TO PINION GEAR 1
17 6889347 . RING, PISTON SEAL 2
18 6871505 . BEARING, BALL, 40 X 62 X (15) 12 MM NO. 5 MAIN 1
19 6889318 . NUT, SPANNER, 1.5625–18 1
20 6889319 . WASHER, CUP LOCK 1
–––*–––
21 6726656–244 . RING, RETAINING, 2.554 IN. (64.87 MM) OD 1
22 6848996–1 . WASHER, 2.160 ID X 2.430 OD X 0.049–0.51 IN. AR
(54.86 ID X 61.72 OD X 1.25–1.3 MM)
– 23 6848996–2 . WASHER, 2.160 ID X 2.430 OD X 0.055–0.057 IN. AR
(54.86 ID X 61.72 OD X 1.40–1.45 MM)
(54.86 ID X 61.72 OD X 1.55–1.60 MM)
(54.86 ID X 61.72 OD X 1.68–1.73 MM)
(54.86 ID X 61.72 OD X 1.80–1.85 MM)
27 6870796 . PLATE, THRUST, 2.4325 OD X 2.1925 ID X 0.025 IN. 1
(61.786 X 55.690 X 0.64 MM)
28 6875491 . SEAL, MATING RING, ROTATING ABCD 1
(REF 250 CEB 72–3158) (DISC)
– 29 6876026–158 . PACKING, 4.737 IN. (120.32 MM) ID ALT
– 30 6845899 . PLUG, POSITIONING, TURBINE NOZZLE SHIELD 2
(R&R 23009573, PER 250 CEB 72–3114)
30 23009573 . PLUG, POSITIONING, TURBINE NOZZLE SHIELD 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 31 6892828 . SHIELD ASSY, TURBINE NOZZLE, 1ST STAGE 1

(FRO 23062752)
R – 31 23062752 . SHIELD ASSY, TURBINE NOZZLE, 1ST STAGE 1
(SB 23073566, PER 250 CEB A–72–3252)
R 31 23073566 . SHIELD ASSY, TURBINE NOZZLE, 1ST STAGE 1
(REF 250 CEB A–72–3252)
32 6893676 . . DEFLECTOR, TURBINE NOZZLE SHIELD AR
– 32 23065580 . . DEFLECTOR, TURBINE NOZZLE SHIELD AR
33 23031415 . . DOME, SHIELD ASSY, TURBINE NOZZLE, 1ST STAGE AR
ON 250–C30G, –C30G/2)
– 33 23065575 . . DOME, SHIELD ASSY, TURBINE NOZZLE, 1ST STAGE AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
TURBINE ASSY (EXHAUST COLLECTOR & POWER TURBINE ROTOR)

FIGURE 3
72-50-00
FIGURE 3
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
3 TURBINE ASSY (EXHAUST COLLECTOR &

POWER TURBINE ROTOR)
FIG. REF TURBINE ASSY, GAS PRODUCER & POWER REF

– 1 6893075 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR AD 1
(REF 250 CEB 72–3023) (R&R 23004509 OR
23004512, PER 250 CEB 72–3040)
(USES 23004236 FLOW SPLITTER & 23004241
BRACKETS) (R&R 23005232, PER 250 CEB 72–3068)
(USES 23004248 FLOW SPLITTER & 23004241
BRACKETS) (R&R 23008000, PER 250 CEB 72–3068)
(REF 250 CEB 72–3044)
(R&R 23004536, PER 250 CEB 72–3068)
(R&R 23005233, PER 250 CEB 72–3068)
– 1 23004536 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR ABCD 1
(R&R 23008568, PER 250 CEB 72–3096)
– 1 23008568 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR ABD 1
(R&R 23008060, PER 250 CEB 72–3111)
(FRO 23035121)
– 1 23035121 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR ABD 1
(UW 6748072–267 RING)
(R&R 23008466, PER 250 CEB 72–3096)
(UW 6748072–267 RING)
(R&R 23008467, PER 250 CEB 72–3096)
(R&R 23008468, PER 250 CEB 72–3096)
(UW 6748072–267 RINGS)
(R&R 23008061, PER 250 CEB 72–3111)
(UW 6748072–267 RINGS) (R&R 23008062,
PER 250 CEB 72–3111) (FRO 23035124)
(R&R 23008063, PER 250 CEB 72–3111)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
DEC 15/01
UNITS
1234567 CODE ASSY

(UW 6748072–267 RINGS)
(R&R 23033112, PER 250 CEB 72–3158)
(R&R 23032325, PER 250 CEB 72–3158)
(R&R 23033110, PER 250 CEB 72–3158)
(R&R 23033111, PER 250 CEB 72–3158)
– 1 23033110 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR 1
(SERV REIDENT OF 23008060, PER 250 CEB 72–3158)
ON 250–C30G, –C30G/2)
(FOR SERV USE & SPARE PARTS
PROC ON 250–C30G, –C30G/2)
(FOR SERV USE & SPARE PARTS
PROC ON 250–C30G, –C30G/2)
(FRO 23054646) (REF 250 CEB A–72–3195)
(R&R 23060495, PER 250 CEB 72–3210)
1 23060495 . SUPPORT ASSY, TURBINE & EXHAUST COLLECTOR 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
2 MS21043–3 . NUT, 0.190–32 24
(11.13 MM) (ALL POSNS UNLESS OTHERWISE
SPECIFIED) (FRO MS9432–05)
R – 3 MS9432–05 . BOLT, TEE HEAD, 0.190–32 X 0.438 IN. (11.13 MM) 18
(FRO MS9432–06)
(12.68 MM) (POSN 8, 9 & 17) (FRO MS9432–06)
R 3 MS9432–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) 21
– 3 6876097 . BOLT, SLAB HD, 0.190–32 X 0.500 IN. (12.7 MM) 3
(POSN 3, 10,17)
– 3 6876097–01 . BOLT, SLAB HD, 0.2245–0.2250 IN. (5.702–5.715 MM) AR
– 3 23033399 . BOLT, SLAB HD, 0.190–32 X 0.500 IN. (12.7 MM) ALT
(POSNS 3, 10, 17)
–––*–––
– 3 A 23004236 . . FLOW SPLITTER, EXHAUST COLLECTOR (THIN) 1
(FRO 23005210)
– 3 A 23005210 . . FLOW SPLITTER, EXHAUST COLLECTOR (THIN) 1
– 3 B 23004248 . . FLOW SPLITTER, EXHAUST COLLECTOR (THICK) 1
– 3 C 23004241 . . BRACKET, FLOW SPLITTER 2
– 3 D 23007994 . . FITTING, DRAIN, TURBINE & EXHAUST COLLECTOR AR
(SERV REPAIR PART)
– 3 E 23008037 . . CONE, INNER, AFT, EXHAUST COLLECTOR AR
(ADDED, PER 250 CEB 72–3096)
– 3 F 23008038 . . BAFFLE, EXHAUST COLLECTOR AR
(ADDED, PER 250 CEB 72–3096)
– 3 G 23008039 . . CYLINDER, INNER, FWD, EXHAUST COLLECTOR AR
(ADDED, PER 250 CEB 72–3096)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
– 3 H 23008055 . . DOUBLER, GEARBOX VENT, EXHAUST COLLECTOR AR

(ADDED, PER 250 CEB 72–3111)
– 3J 23008056 . . DOUBLER, BLEED VALVE VENT, EXHAUST AR
COLLECTOR (ADDED, PER 250 CEB 72–3111)
– 3 K 23008057 . . DOUBLER, COMPR REAR SEAL VENT, EXHAUST AR
COLLECTOR (ADDED, PER 250 CEB 72–3111)
– 3 L 23008648 . . TUBE & FLANGE ASSY (SERV REPAIR PART) AR
– 3 M 23032941 . . TUBE, EXHAUST COLLECTOR, SEAL SUPPLY 1
(ADDED, PER 250 CEB 72–3158)
– 3 N 23032943 . . FLANGE, VENT TUBE (ADDED, PER 250 CEB 72–3158) 1
– 3 P 23032947 . . STOP, COMPR VENT (ADDED, PER 250 CEB 72–3158) 1
4 6853366 . BRACKET, ASSY, FIRESHIELD (POSN 8, 9,17 &18) 2
– 4 A 6749213–02 . . NUT PLATE, 0.190–32 (SB MS21048–3W) 1
– 4 A MS21048–3W . . NUT PLATE, 0.190–32 1
– 4 A 6890470–3 . . NUT PLATE, 0.190–32 ALT
5 6898683 . ROTOR ASSY, POWER TURBINE 1
R – 6 6898679 . . SHAFT, POWER TURBINE OUTER 1
(REF 250 CEB A–72–3049)
(R&R 23030961, PER 250 CEB A–72–3119)
– 6 23001909 . . SHAFT, POWER TURBINE OUTER 1
(R&R 23030961, PER 250 CEB A–72–3119)
– 6 23030961 . . SHAFT, POWER TURBINE OUTER 1
(UW 23030956 & 23030982)
(SB OR R&R 23038136, PER 250 CEB 72–3180)
6 23038136 . . SHAFT, POWER TURBINE OUTER 1
7 6890531 . . NUT, COUPLING, POWER TURBINE OUTER AD 1
(R&R 23001801, PER 250 CEB 72–3025)
(REF 250 CEB A–72–3049)
7 23001801 . . NUT, COUPLING, POWER TURBINE OUTER 1
–––*–––
– 8 6892764 . . WHEEL, TURBINE, 4TH STAGE (FRO 23066744) 1
8 23066744 . . WHEEL, TURBINE, 4TH STAGE 1
R – 9 6889076 . . NUT, COUPLING, POWER TURBINE INNER, LH THD 1
(REF 250 CEB A–72–3049) (FRO 23001849)
9 23001849 . . NUT, COUPLING, POWER TURBINE INNER, LH THD 1
(FRO 23030982)
– 9 23030982 . . NUT, COUPLING, POWER TURBINE INNER, LH THD 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
10 6841676 . . GASKET, METALLIC, 1.560 X 0.175 IN. 1

(39.62 X 4.5 MM)
– 11 6898694 . . NOZZLE ASSY, TURBINE, 4TH STAGE 1
(REF 250 CEB A–72–3056, 72–3099 & 72–3122)
(R&R 23008470, PER 250 CEB 72–3099)
– 11 23008470 . . NOZZLE ASSY, TURBINE, 4TH STAGE 1
(FRO 23031426)
– 11 23031426 . . NOZZLE ASSY, TURBINE, 4TH STAGE ALT
(R&R 23032264, PER CEB 72–3122)
11 23032264 . . NOZZLE ASSY, TURBINE, 4TH STAGE ALT
– 11 A 23004213 . . . DIAPHRAGM, NOZZLE, 4TH STAGE AR
(UIA 6898694 FOR SERV REPAIR)
– 11 A 23053280 . . . DIAPHRAGM, NOZZLE 4TH STAGE AR
– 11 B 23004214 . . . KEY, 4TH STAGE OR 2ND STAGE NOZZLE AR
12 6898663 . . WHEEL, TURBINE, 3RD STAGE 1
– 13 6898675 . . SEAL, LABYRINTH, POWER TURBINE, ROTATING 1
(R&R 23037446, PER 250 CEB 72–3164)
13 23037446 . . SEAL, LABYRINTH, POWER TURBINE, ROTATING 1
R – 14 6898678 . . SHAFT, POWER TURBINE, INNER ABD 1
(REF 250 CEB 72–3058)
(R&R 23030956, PER 250 CEB A–72–3119)
– 14 23001908 . . SHAFT, POWER TURBINE, INNER ABD 1
(REF 250 CEB 72–3058)
(R&R 23030956, PER 250 CEB A–72–3119)
– 14 23005263 . . SHAFT, POWER TURBINE, INNER 1
(R&R 23030956, PER 250 CEB A–72–3119)
(SB OR R&R 23038137, PER 250 CEB A–72–3180)
(R&R 23071313, PER 250 CEB 72–3238)
14 23071313 . . SHAFT, POWER TURBINE, INNER 1
(REF 250 CEB 72–3238)
– 15 6898653 . NOZZLE ASSY, TURBINE, 3RD STAGE (FRO 6898963) AD 1
– 15 6898693 . NOZZLE ASSY, TURBINE, 3RD STAGE AD 1
(R&R 6898963, PER 250 CEB 72–3183)
– 15 6898963 . NOZZLE ASSY, TURBINE, 3RD STAGE 1
(R&R 23033403, PER 250 CEB 72–3142)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
UNITS
1234567 CODE ASSY
– 15 23033403 . NOZZLE ASSY, TURBINE, 3RD STAGE 1

(R&R 23057160, PER 250 CEB 72–3207)
R – 15 23057160 . NOZZLE ASSY, TURBINE, 3RD STAGE 1
(WEU 23075363)
R – 15 23056135 . NOZZLE ASSY, TURBINE, 3RD STAGE 1
(WEU 23075363)
R 15 23075363 . NOZZLE ASSY, TURBINE, 3RD STAGE DEF 1
– 16 6898564 . BLANKET, INSULATION, POWER TURBINE SUPPORT 1
(FRO 23008555)
16 23008555 . BLANKET INSULATION, POWER TURBINE SUPPORT 1
17 6823481–7000 . PACKING (12.62 IN. 320.55 MM REQD) AR
18 6898742 . SEAL ASSY, OIL BELLOWS (FRO 23009656) 1
(DISC., CUSTOMER OPTION, PER 250 CEB 72–3158)
– 18 23009656 . SEAL ASSY, OIL BELLOWS (UIA 23031925) 1
– 18 6898764 . SEAL ASSY, OIL BELLOWS (UIA 23031925) ALT
(DISC.,CUSTOMER OPTION, PER 250 CEB 72–3158)
19 23032327 . SEAL, STATIONARY, ABRADABLE NO. 5 AD 1
(ADDED, PER 250 CEB 72–3158)
20 23032328 . SEAL, ROTATING, LABYRINTH NO. 5 1
(ADDED, PER 250 CEB 72–3158)
21 6748072–267 . RING, RETAINING (REF 250 CEB 72–3023) ABCD 2
– 22 6898837 . ADAPTER, SPLINE, TURBINE (FRO 23056107) 1
– 22 23056107 . ADAPTER, SPLINE, TURBINE (FRO 23030974) 1
22 23030974 . ADAPTER, SPLINE, TURBINE 1
23 6896408 . NUT, SPLINE LOCK 1
–––*–––
– 24 6873741 . BEARING, ROLLER, 29 X 42 X 9 MM, NO. 6 MAIN 1
(FRO 6871062)
24 6871062 . BEARING, ROLLER, 29 X 42 X 9 MM, NO. 6 MAIN ALT
– 24 23007202 . BEARING, ROLLER, 29 X 42 X 9 MM, NO. 6 MAIN ALT
25 6859073 . RING, RETAINING, 1.765 X 0.042 IN. 1
(44.83 X 1.07 MM) (REF 250 CEB 72–3072)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
UNITS
1234567 CODE ASSY
26 6898677 . SPACER, 1.465 X 1.652 X 0.298 IN. 1

(37.21 X 41.96 X 7.57 MM)
27 6844422 . DAMPER, SEGMENT, TURBINE BEARING 8
28 6898945 . COVER ASSY, OIL, GAS PRODUCER TURBINE 1
BEARING SUPPORT
29 MS9705–14 . BOLT, 0.190–32 X 1.000 (25.40 MM) 10
–––*–––
30 6893603 . GASKET, 3.325 ID X 3.500 OD X 0.115 IN. 1
(74.46 X 88.90 X 2.92 MM)
– 30 23009632 . SEAL, METALLIC, 3.315 ID X 3.559 OD IN. THICK AR
(84.20 X 90.40 MM)
– 31 6899153 . NOZZLE ASSY, OIL, GAS PRODUCER TURBINE 1
BEARING (SB 23031489, PER 250 CEB 72–3190)
(SB 23031489, CUSTOMER OPTION,
PER 250 CEB 72–3199)
31 23031489 . NOZZLE ASSY, OIL, GAS PRODUCER TURBINE 1
BEARING
32 MS9564–03 . BOLT, 0.164–36 X 0.312 IN. (7.93 MM) 2
(S P/N MS9704–03)
–––*–––
33 6840407 . NUT, SPANNER, 0.750–20 1
34 6849500 . RING, RETAINING, 1.875 DIA (47.623 MM) ABCD 1
(REF 250 CEB 72–3190 & 72–3199) (DISC.)
35 6896481 . NUT, SPANNER, NO. 8 BEARING (FRO 6896875) (DISC.) AD 1
– 35 6896875 . NUT, SPANNER, NO. 8 BEARING ABCD 1
(REF 250 CEB 72–3190 & 72–3199) (DISC.)
– 36 23031488 . PLATE, THRUST, GAS PRODUCER BEARING B 1
(SB 23056645, PER 250 CEB 72–3189)
– 36 23037429 . PLATE, THRUST, GAS PRODUCER BEARING 1
(SB 23056645, PER 250 CEB 72–3189)
– 36 23056645 . PLATE, THRUST, GAS PRODUCER BEARING 1
(REF 250 CEB 72–3190) (R&R 23058137,
36 23058137 . PLATE, THRUST, GAS PRODUCER BEARING 1
37 6748072–187 . RING, RETAINING, INT, 1.875 DIA (47.63 MM) 1
(REF 250 CEB 72–3190) (ADDED, CUSTOMER
OPTION, PER 250 CEB 72–3199)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
DEC 15/01
TURBINE ASSY (POWER TURBINE, GAS PRODUCER SUPPORTS & TURBINE ROTOR)
FIGURE 4
72-50-00
FIGURE 4
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
4 TURBINE ASSY (POWER TURBINE, GAS PRODUCER

SUPPORTS & TURBINE ROTOR)
FIG. REF TURBINE ASSY, GAS PRODUCER & POWER REF

– 1 6898688 . SUPPORT ASSY, POWER TURBINE ABCD 1
(R&R 23033412, PER 250 CEB 72–3151)
1 23033412 . SUPPORT ASSY, POWER TURBINE (FRO 23034760) 1
ON 250–C30G, –C30G/2)
– 1 23034760 . SUPPORT ASSY, POWER TURBINE 1
(FRO 23038213)
ON 250–C30G, –C30G/2)
1 23038213 . SUPPORT ASSY, POWER TURBINE (FRO 23062070) 1
2 23062070 . SUPPORT & COVER ASSY, POWER TURBINE 1
3 23062056 . . SUPPORT, POWER TURBINE (UIA 23062070) 1
4 23062062 . . COVER, OIL SUMP, POWER TURBINE SUPPORT, 1
(SEMI–FINISHED) (UIA 23062070)
5 6850314 . . BOLT, 12–PT HD, 0.250–28 X 1.25 IN. (28.575 MM) 4
–––*–––
6 6875350 . . GASKET, METALLIC U–RING, 2.830 X 2.640 X 0.115 IN. 1
(71.882 X 67.056 X 2.92 MM)
7 MS21043–3 . NUT, 0.190–32 24
– 8 6820055–7 . SCREW, SOCKET HD, 0.190–32 X 0.438 IN. (11.13 MM) AD 18
(FRO MS9432–05)
R – 8 MS9432–05 . BOLT, TEE HEAD, 0.190–32 X 0.438 IN. (11.13 MM) 18
(FRO MS9432–06)
(12.68 MM) (POSN 2, 3, 5) (FRO MS9432–06)
R 8 MS9432–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) 21
– 8 6876097 . BOLT, SLAB HD, 0.190–32 X 0.500 IN. (12.70 MM) 3
(POSN 4, 10 & 17)
– 8 6876097–0l . BOLT, SLAB HD, 0.2245–0.2250 IN. (5.702–5.715 MM) AR
– 8 6876097–03 . BOLT, SLAB HD, O.2445–0.2450 IN. (6.210–6.223 MM) AR
– 8 6876097–04 . BOLT, SLAB HD, O.2545–0.2450 IN. (6.464–6.477 MM) AR
– 8 23033399 . BOLT, SLAB HD, 0.190–32 X 0.500 IN. (12.7 MM) ALT
(POSN 4, 10 & 17)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
DEC 15/01
UNITS
1234567 CODE ASSY

–––*–––
– 9 23004203 . . SEAL, POWER TURBINE SUPPORT AR
(FOR SERV REPAIR)
– 10 23004205 . . REAR COVER, POWER TURBINE SUPPORT AR
(FOR SERV REPAIR)
– 11 6876919 . . SEAL, SERRATED, BALANCE PISTON (FRO 23004567) AD 1
– 11 6898687–1 . . SEAL, SERRATED, BALANCED, PISTON AD AR
(SERV REPL FOR 6876919) (FRO 23007162–1)
– 11 6898687–2 . . SEAL, SERRATED, BALANCED, PISTON AD AR
(SERV REPL FOR 6876919) (FRO 23007162–2)
11 23004567 . . SEAL, SERRATED, BALANCE PISTON (FRO 23005462) 1
– 11 23007162–1 . . SEAL, SERRATED, BALANCE PISTON ABCD AR
(SERV REPL FOR 6876919 OR 23004567)
(FRO 23030978–1) (FOR SERV USE & SPARE
PARTS PROC ON 250–C30G, –C30G/2)
– 11 23007162–2 . . SEAL, SERRATED, BALANCE PISTON AR
(SERV REPL FOR 6876919 OR 23004567)
(FRO 23030978–2) (FOR SERV USE & SPARE
– 11 23005462 . . SEAL, SERRATED, BALANCE PISTON 1
(SERV REPL FOR 6876919, 23004567 OR 23005462)
ON 250–C30G, –C30G/2)
(SERV REPL FOR 6876919, 23004567 OR 23005462)
ON 250–C30G, –C30G/2)
12 MS9592–133 . BRACKET, ANGLE, 90° (POSN 5) 1
13 6870031 . RACE, BEARING, INNER, 25 X 11 MM 1
– 13 6857851 . . RACE, BEARING, INNER, 25 X 11 MM 1
– 13 6824711 . . RACE, BEARING, INNER, 25 X 11 MM ALT
– 13 6824712 . . RACE, BEARING, INNER, 25 X 11 MM ALT
14 6888602 . SLINGER, OIL, GAS PRODUCER TURBINE BEARING 1
FORWARD
– 15 6876578 . SEAL, LABYRINTH, GAS PRODUCER TURBINE, AD 1
FORWARD (FRO 6896098)
15 6896098 . SEAL, LABYRINTH, GAS PRODUCER TURBINE 1
FORWARD
16 6892832 . SHIELD ASSY, TURBINE NOZZLE, 3RD STAGE 1
– 17 6892834 . COVER ASSY, OIL SUMP, POWER TURBINE SUPPORT 1
(R&R 23005272, PER 250 CEB 72–3065)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 17 23005272 . COVER ASSY, OIL SUMP, POWER TURBINE SUPPORT 1

(R&R 23034608, PER 250 CEB 72–3151)
– 17 23034608 . COVER ASSY, OIL SUMP, POWER TURBINE 1
(FRO 23037449)
17 23037449 . COVER ASSY, OIL SUMP, POWER TURBINE 1
(UIA 23038213) (FRO 23062062)
18 6850314 . BOLT, 12 PT HD, 0.250–28 X 1.125 IN. 4
(28.58 MM) (UIA 23038213)
–––*–––
19 6875350 . GASKET, METALLIC U–RING, 2.830 OD X 2.640 ID X 1
0.115 IN. (71.882 X 67.056 X 2.92 MM) (UIA 23038213)
– 20 6873741 . BEARING, ROLLER, 29 X 42 X 9 MM, NO. 7 MAIN 1
(FRO 6871062)
20 6871062 . BEARING, ROLLER, 29 X 42 X 9 MM, NO. 7 MAIN 1
21 6844422 . DAMPER, SEGMENT, TURBINE BEARING 8
R – 22 23031913 . ROTOR ASSY, TURBINE GAS PRODUCER 1
(SB 23062033 ON 250–C30G/2 ENGINES ONLY,
PER 250 CEB 72–3203) (FRO 23074531)
R – 22 23062033 . ROTOR ASSY, TURBINE GAS PRODUCER F 1
(FRO 23074531)
R 22 23074531 . ROTOR ASSY, TURBINE GAS PRODUCER 1
– 23 23039751 . . NUT, SPANNER, TURBINE TIEBOLT (UIA 23038213) 1
– 23 23051635 . . NUT, SPANNER, TURBINE TIEBOLT (FRO 6840406) 1
23 6840406 . . NUT, SPANNER, TURBINE TIEBOLT 1
R –23A 23074694 . .SET, TURBINE ROTOR, GAS PRODUCER NP
(UIA 23074531) (FOR PRODUCTION USE ONLY)
(CONISISTS OF 23074361, 23074384, 23074362)
– 24 6898841 . . WHEEL, TURBINE, 1ST STAGE (FRO 6898911) 1
(REF 250 CEB 72–3107)
– 24 6898911 . . WHEEL, TURBINE, 1ST STAGE (FRO 23053299) 1
(REF 250 CEB 72–3107)
R – 24 23053299 . . WHEEL, TURBINE, 1ST STAGE (FRO 23074361) 1
R 24 23074361 . . WHEEL, TURBINE, 1ST STAGE 1
– 25 23032332 . . NOZZLE ASSY, TURBINE, 2ND STAGE 1
(R&R 23034142, PER 250 CEB 72–3150)
– 25 23034142 . . NOZZLE ASSY, TURBINE, 2ND STAGE ALT
(FRO 23032335) (FOR SERV USE & SPARE
(R&R 23055438, PER 250 CEB 72–3188)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
R – 25 23055438 . . NOZZLE ASSY, TURBINE, 2ND STAGE 1

(REF 250 CEB 72–3203) (FRO 23074384)
– 25 23062029 . . NOZZLE ASSY, TURBINE, 2ND STAGE F 1
(FRO 23055438)
– 25 23053330 . . NOZZLE ASSY, TURBINE, 2ND STAGE AR
(SEMI–FINISHED)
(R&R 23055438, PER 250 CEB 72–3196)
R 25 23074384 . . NOZZLE ASSY, TURBINE, 2ND STAGE 1
– 26 23001810 . . . DIAPHRAGM ASSY, 2ND STAGE TURBINE NOZZLE A 1
(FOR SERV REPAIR)
– 26 23031934 . . . DIAPHRAGM, 2ND STAGE TURBINE NOZZLE 1
(REF 250 CEB 72–3131 & 72–3150)
– 27 23008649 . . . KEY, TURBINE NOZZLE, 2ND STAGE 5
(REF 250 CEB 72–3150 OR 72–3188)
– 27 23004214 . . . KEY, 4TH STAGE OR 2ND STAGE NOZZLE BCDE AR
– 27 23055441–01 . . . KEY, NOZZLE ASSY, TURBINE, 2ND STAGE 5
(UIA 23055438) (REF 250 CEB 72–3188)
– 27 23055441–02 . . . KEY, NOZZLE ASSY, TURBINE, 2ND STAGE AR
(UIA 23055432) (REF 250 CEB 72–3188)
– 28 23004216 . . . RING, 2ND STAGE NOZZLE (FOR SERV REPAIR) 1
– 28 23007221 . . . RING, OUTER, 2ND STAGE TURBINE NOZZLE 1
(REF 250 CEB 72–3101)
– 28 23009886 . . . RING, INNER, 2ND STAGE TURBINE NOZZLE AR
(SERV REPAIR PART FOR 23008004)
– 28 23050841 . . . RING, INNER, 2ND STAGE NOZZLE 3
(ADDED, PER 250 CEB 72–3150)
R – 29 23032280 . . WHEEL, TURBINE, 2ND STAGE (FRO 23074362) 1
R 29 23074362 . . WHEEL, TURBINE, 2ND STAGE 1
– 30 6889320 . . BOLT, TIE, TURBINE 1
(SB 23008030, PER 250 CEB 72–3109)
30 23008030 . . BOLT, TIE, TURBINE 1
– 31 6871508 . BEARING, BALL, 20 X 42 X (15) 12 MM, NO. 8 MAIN 1
(SB 23007152, PER 250 CEB 72–3094)
– 31 23007152 . BEARING, BALL, 20 X 42 X (15) 12 MM, NO. 8 MAIN 1
(SB 23031478, PER 250 CEB 72–3190)
PER 250 CEB 72–3199)
31 23031478 . BEARING BALL, 20 X 42 X (15) 12 MM, NO. 8 MAIN 1
(FRO 23058131) (REF 250 CEB 72–3199)
32 23058131 . BEARING & SLEEVE ASSY (REF 250 CEB 72–3199) 1
33 23031478 . . BEARING, BALL (REF 250 CEB 72–3199) 1
34 23058128 . . SLEEVE, NO. 8 BEARING (REF 250 CEB 72–3199) 1
A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
– 35 6808390 . SEAL, LABYRINTH, ROTATING, TURBINE BEARING, 1

AFT (FRO 23033862)
35 23033862 . SEAL, LABYRINTH, ROTATING, TURBINE BEARING 1
AFT
– 36 6893647 . SEAL, LABYRINTH, GAS PRODUCER TURBINE AFT 1
(SB 23031494, PER 250 CEB 72–3190 & 72–3199)
36 23031494 . SEAL, LABYRINTH, GAS PRODUCER TURBINE AFT 1
– 37 6898721 . NOZZLE ASSY, TURBINE, 1ST STAGE (FRO 23001969) A 1
(R&R 23001997, PER 250 CEB 72–3031)
– 37 23001969 . NOZZLE ASSY, TURBINE, 1ST STAGE (FRO 23001997) A 1
– 37 23001997 . NOZZLE ASSY, TURBINE, 1ST STAGE ABCD 1
(R&R 23007213, PER 250 CEB 72–3101)
– 37 23007213 . NOZZLE ASSY, TURBINE, 1ST STAGE ABCD 1
(FRO 23008518) (REF 250 CEB 72–3168)
– 37 23008518 . NOZZLE ASSY, TURBINE, 1ST STAGE (FRO 23008064) 1
(UW 23007216, 23008519 OR 2308041)
ON 250–C30G, –C30G/2)
– 37 23008064 . NOZZLE ASSY, TURBINE, 1ST STAGE 1
(UW 23007216, 23008519 OR 23008041)
(REF 250 CEB 72–3203, 72–3168, 72–3213)
(FRO 23057145 BOEING 250–C30(HU) APPL ONLY)
(FRO 23062028)
– 37 23057145 . NOZZLE ASSY, TURBINE, 1ST STAGE AC 1
(BOEING 250–C30(HU) APPL) (REF 250 CEB 72–3213)
(REL IN LIMITED QUANTITIES, PER RFSE 250–96–10
FOR 250–C30M ONLY)
37 23062028 . NOZZLE ASSY, 1ST STAGE 1
– 37 A 23066708 . SHIM, TURBINE NOZZLE, 1ST STAGE AR
– 38 23001807 . . DIAPHRAGM ASSY (FOR SERV REPAIR) AR
(REF 250 CEB 72–3031)
– 38 23001817 . . DIAPHRAGM ASSY (FOR SERV REPAIR) AR
(REF 250 CEB 72–3031)
– 39 23001805 . . . PLATE, NOZZLE, 1ST STAGE (FOR SERV REPAIR) AR
(FRO 23031291) (REF 250 CEB 72–3031)
– 39 23031291 . . . PLATE, NOZZLE, 1ST STAGE (FOR SERV REPAIR) AR
– 40 23004206 . . . RING, KEYED (REF 250 CEB 72–3031) AR
– 41 23004208 . . . DIAPHRAGM (REF 250 CEB 72–3031) AR
– 42 23001847 . . RING, NOZZLE, 1ST STAGE KEYED AR
(SB 23005218, PER 250 CEB 72–3031)
– 42 23030341 . . RING, NOZZLE, 1ST STAGE, KEYED (FRO 23005218) AR
– 42 23005218 . . RING, NOZZLE, 1ST STAGE, KEYED AR
(SERV REPAIR PART) (REF 250 CEB 72–3031)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
UNITS
1234567 CODE ASSY
– 43 23001816 . . KEY (SERV REPAIR PART) (REF 250 CEB 72–3031) AR

– 44 23007220 . . RING, OUTER (REF 250 CEB 72–3101) 1
– 45 23033188 . PACKING, CERAMIC ROPE (FRO 23057101) AR
– 45 23057101 . PACKING, CERAMIC ROPE (FRO 23065485) AR
45 23065485 . PACKING, CERAMIC ROPE AR
– 45 23059589 . PACKING, CERAMIC ROPE, CONTINUOUS AR
NON–SPLICED 99 FT LENGTHS
– 45 23051074 . PACKING, CERAMIC ROPE AR
(SERV USE & SPARE PARTS PROC)
– 46 23031284 . SUPPORT ASSY, TURBINE, GAS PRODUCER 1
(R&R 23034773, PER 250 CEB 72–3153)
(FRO 23031492 ON –C30P ENGINE)
R – 46 23066717 . SUPPORT ASSY, TURBINE, GAS PRODUCER ABCD 1
(FRO 23034773)
(R&R 23034766, PER 250 CEB 72–3161)
(R&R 23034775, PER 250 CEB 72–3190)
– 46 23031492 . SUPPORT ASSY, TURBINE, GAS PRODUCER B 1
(R&R 23034767, PER 250 CEB 72–3153)
R – 46 23066718 . SUPPORT ASSY, TURBINE, GAS PRODUCER B 1
(FRO 23034767)
(R&R 23034775, PER 250 CEB 72–3161)
PER 250 CEB–3199)
R – 46 23066726 . SUPPORT ASSY, TURBINE, GAS PRODUCER 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
UNITS
1234567 CODE ASSY

(FRO 23058145)
46 23058145 . SUPPORT ASSY, TURBINE, GAS PRODUCER 1
R – 46 23073466 . SUPPORT ASSY, TURBINE, GAS PRODUCER 1
– 47 23031491 . . PLUG, ORIFICE (REF 250 CEB 72–3190) 1
PER 250 CEB 72–3199)
– 47 23031491–1 . . PLUG, ORIFICE (REF 250 CEB 72–3190) AR
(SB 23058149–1, CUSTOMER OPTION,
PER 250 CEB 72–3199)
PER 250 CEB 72–3199)
PER 250 CEB 72–3199)
PER 250 CEB 72–3199)
PER 250 CEB 72–3199)
47 23058149 . . PLUG, ORIFICE (REF 250 CEB 72–3199) 1
– 48 23061246 . . SLEEVE, SUPPORT, TURBINE GAS PRODUCER 1
(ADDED, CUSTOMER OPTION, PER 250 CEB 72–3199)
49 23031909 . RING, ENERGY ABSORBING, INTERNAL 1
(REF 250 CEB A–72–3128)
– 49 23032263 . RING, ENERGY ABSORBING, INTERNAL (DISC.) ALT
– 50 23031454 KIT, EXTERNAL ENERGY RING (FOR DETAIL PARTS AR
& INSTALLATION INSTRUCTIONS, SEE 250
CEB A–72–3124 & CEB 72–3136) (FRO 23032340)
– 50 23032340 KIT, EXTERNAL ENERGY RING (FOR DETAIL PARTS AR
& INSTALLATION INSTRUCTIONS, SEE 250
CEB A–72–3124 & CEB 72–3136)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 1/00
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30, –C30S, –C30G)

72-60-00
FIGURE 1
PAGE 0
NOV 15/99
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30, –C30S, –C30G)

72-60-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
1 GEARBOX ASSY, POWER & ACCESSORY (COVER)

(250–C30, –C30S, –C30G)
– 1 23008586 . GEARBOX ASSY, POWER & ACCESSORY AD 1

(R&R 23035179, PER 250 CEB 72–3158)
(REF 250 CEB 72–3145)
(FRO 23053333)
– 1 23039782 . GEARBOX ASSY, POWER & ACCESSORY E 1
2 6855339 . PLATE ASSY, IDENTIFICATION, GEARBOX ADE 1
– 2 23064039 . . PLATE, IDENT, GEARBOX, BLANK (SB 23073667) ADE 1
– 2 23073667 . . PLATE, IDENT, GEARBOX, BLANK ADE 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) ADE 2
– 4 MS35338–137 . WASHER, 0.164 IN. (4.17 MM) ID (FRO MS122054) ADE 2
4 MS122054 . WASHER, 0.164 IN. (4.17 MM) ID ADE 2
–––*–––
– 5 6895072 . NOZZLE ASSY, OIL, PINION BEARING A 1
(R&R 23001970, PER 250 CEB 72–3012)
– 5 23001970 . NOZZLE ASSY, OIL, PINION BEARING AD 1
(R&R 23034601, PER 250 CEB 72–3157 OR 72–3193)
(SB 23035174)
(R&R 23035174, PER 250 CEB 72–3158)
5 23035174 . NOZZLE ASSY, OIL, PINION BEARING ADE 1
(REF 250 CEB’S 72–3157 & 72–3158)
6 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 2
–––*–––
8 AS3085–010 . PACKING, 0.239 IN. (6.07 MM) ID ADE 1
– 9 6898540 . PICKUP ASSY, MAGNETIC, N1 (FRO 23007979) ADE 1
9 23007979 . PICKUP ASSY, MAGNETIC, N1 ADE 1
– 10 6898872 . PICKUP ASSY, DUAL COIL, N2 RPM (FRO 6899145) ADE 1
– 10 6899145 . PICKUP ASSY, DUAL COIL, N2 RPM (FRO 23007981) ADE 1
10 23007981 . PICKUP ASSY, DUAL COIL, N2 RPM ADE 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
11 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 4
–––*–––
13 M83723/75R12–12N . . CONNECTOR, PLUG ADE 1
– 13 M83723/15A–12 . . CONNECTOR, BACKSHELL ADE 1
– 13 MS3418–12N . . CONNECTOR, BACKSHELL ADE ALT
14 NAS1745–7 . . SPLICE, 0.625 IN. (15.88 MM) LG ADE 2
– 14 A 6891980–375 . . TUBING, 0.375 IN. (9.53 MM) ID ADE AR
15 6891980–500 . . TUBING, 0.500 IN. (12.7 MM) ID ADE AR
16 6897991–000 . . CABLE, SHIELDED, 12 IN. (304.8 MM) ADE AR
18 MS9015–04 . PLUG, 0.4375–20 ADE 3
20 6871534 . PLUG, MAGNETIC, 0.500–20 X 0.500–28 ADE 2
(UW 6825546 INSERT) (FRO 6896482,
(REF 250 CEB A–72–3098)
(FRO 23005287 ON 250–C30G)
20 A 23005287 . PLUG, MAGNETIC, QUICK DISCONNECT E 2
(UW 23005291 INSERT)
20 B M83248/1–012 . PACKING (FOR SERV USE & SPARE PARTS PROC) E AR
(REF 250 CEB A–72–3098, UW 6871534 PLUG)
– 22 6894110 KIT, MAGNETIC PLUG, QUICK–DISCONNECT AD 1
(REF 250 CEB 72–3083)
23 6896483–1 . INSERT, FLANGED, MAGNETIC PLUG AD 2
– 23 6896483–2 . INSERT, FLANGED, MAGNETIC PLUG (0.003 IN. OS) AD AR
(NOT KITTED)
– 23 6896483–3 . INSERT, FLANGED, MAGNETIC PLUG (0.006 IN. OS) AD AR
(NOT KITTED)
24 MS9486–26 . PIN, 0.0938 X 0.250 IN. (2.383 X 6.35 MM) AD 2
25 AS3085–015 . PACKING, 0.551 IN. (13.995 MM) ID AD 2
26 6896482 . PLUG, MAGNETIC QUICK–DISCONNECT AD 2
27 AS3084–05 . . PACKING, 0.414 IN. (10.52 MM) AD 2
– 27 M83248/1–905 . . PACKING AD ALT
28 FIG. REF . COVER ASSY, GEARBOX, POWER & ACCESSORY ADE REF
(REF 72–60–00, FIG. 13 FOR DETAILS)
28 A FIG. REF . HOUSING ASSY, GEARBOX, POWER & ACCESSORY ADE REF

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
29 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 34
(5.41 X 11.125 X 5.558 MM)
32 MS21043–4 . NUT, SLFLKG, 0.250–28 ADE 17
–––*–––
34 6898642 . GEARSHAFT, SPUR, CENTRIFUGAL BREATHER ADE 1
– 35 6859432 . BEARING, BALL (25 X 42 X 9 MM) ADE 1
(REF 250 CEB 72–3104) (FRO 23007151)
– 35 6824744 . . BEARING, BALL (25 X 42 X 9 MM) ADE 1
(REF 250 CEB 72–3104)
– 35 6842067 . . BEARING, BALL (25 X 42 X 9 MM) ADE ALT
35 23007151 . BEARING, BALL (25 X 42 X 9 MM) ADE 1
(FRO 6889150 OR 23005746)
– 36 23005746 . BEARING, BALL (12 X 37 X 12 MM) ADE ALT
– 37 6898652 . GEARSHAFT, SPUR, 77 TEETH IDLER ADE 1
(FRO 6898985, PER 250 CEB 72–3003)
– 37 6898985 . GEARSHAFT, SPUR, 77 TEETH IDLER (FRO 6898993) ADE 1
37 23007246 . GEARSHAFT, SPUR, 77 TEETH IDLER ADE 1
– 38 6859431 . BEARING, BALL (12 X 28 X 8 MM) (FRO 23008469) ADE 1
(REF 250 CEB 72–3104)
(REF 250 CEB 72–3104)
(FRO 23005747, PER 250 CEB 72–3095)
40 23007247 . GEARSHAFT, SPUR, 26 TEETH IDLER ADE 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY

(FRO 23005747, PER 250 CEB 72–3095)
(REF 250 CEB 72–3095)
– 42 6898980 . GEARSHAFT, GENERATOR IDLER ADE 1
(FRO 6898981, PER 250 CEB 72–3003)
42 6898981 . GEARSHAFT, GENERATOR IDLER ADE 1
(FRO 6889150 OR 23005746)
45 6892285 . GEARSHAFT, STARTER GENERATOR ADE 1
– 45 23059587 . GEARSHAFT, STARTER GENERATOR ADE 1
(REL IN LIMITED QUANTITIES, PER RFSE 250–93–1)
47 6844316 . BRACKET, ANGLE, 90° ADE 4
49 MS9593–015 . BRACKET, ANGLE, 90° ADE 1
(REF 250 CEB 75–3020 OR A–75–3021)
52 23007164 . BRACKET, PC FILTER ADE 1
(REF 250 CEB 75–3020 OR A–75–3021)
53 6893636 . BRACKET, START COUNTER MOUNTING ADE 1
(REF 250 CEB 72–3026)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
UNITS
1234567 CODE ASSY

55 MS21043–5 . NUT, SLFLKG, 0.3125–24 ADE 8
–––*–––
– 57 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE ADE 2
(FRO 23052955)
57 23052955 . GASKET, ENGINE ACCESSORY DRIVE ADE 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
72-60-00
FIGURE 1
PAGE 7
NOV 15/99
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30P)

72-60-00
FIGURE 2
PAGE 0
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30P)

72-60-00
FIGURE 2
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30P)
– 1 23005655 GEARBOX ASSY, POWER & ACCESSORY B 1

(REF 250 CEB 72–3104)
(R&R 23035178, PER 250 CEB 72–3158)
PER 250 CEB 72–3166)
(R&R 23053349, PER 250 CEB 72–3158)
PER 250 CEB 72–3166)
– 1 23053349 GEARBOX ASSY, POWER & ACCESSORY B AR
(REF 72–00–00, FIG. 2, FOR NHA)
– 1 23061913 GEARBOX ASSY, POWER & ACCESSORY B AR
(FRO 23035178)
2 6855339 . PLATE ASSY, IDENTIFICATION, GEARBOX B 1
R – 2 23064039 . . PLATE, IDENT, GEARBOX, BLANK (SB 23073667) B 1
R – 2 23073667 . . PLATE, IDENT, GEARBOX, BLANK B 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) B 2
– 4 MS35338–137 . WASHER, 0.164 IN. (4.17 MM) ID (FRO MS122054) B 2
4 MS122054 . WASHER, 0.164 IN. (4.17 MM) ID B 2
–––*–––
– 5 23001970 . NOZZLE ASSY, OIL, PINION BEARING B 1
(R&R 23034601 250 CEB 72–3157 OR 72–3193)
(SB 23035174)
(R&R 23035174, PER 250 CEB 72–3158)
5 23035174 . NOZZLE ASSY, OIL, PINION BEARING B 1
(REF 250 CEB’S 72–3157 & 72–3158)
6 MS21043–3 . NUT, SLFLKG, 0.190–32 B 2
–––*–––
– 9 6899144 . PICKUP ASSY, N2 RPM (FRO 23007980) B 1
(DISC., PER 250 CEB 73–3071)
– 9 23007980 . PICKUP ASSY, N2 RPM (DISC., PER 250 CEB 73–3071) B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
– 10 MS21043–3 . NUT, SLFLKG, 0.190–32 (DISC., PER 250 CEB 73–3071) B 2
– 11 MS9320–09 . WASHER, 0.190 IN. (4.83 MM) ID B 2
(DISC., PER 250 CEB 73–3071)
–––*–––
– 12 M837237–13R1006N . . CONNECTOR, PLUG (DISC., PER 250 CEB 73–3071) B 1
– 12 A M83723/15A10 . . CONNECTOR, BACKSHELL B 1
(DISC., PER 250 CEB 73–3071)
– 12 A 2303418–10N . . CONNECTOR, BACKSHELL B ALT
(DISC., PER 250 CEB 73–3071)
– 13 NAS1745–7 . . SPLICE, 0.625 IN. (15.88 MM) LONG B 2
(DISC., PER 250 CEB 73–3071)
– 13 A 6891980–375 . . TUBING, 0.375 IN. (9.53 MM) ID B AR
(DISC., PER 250 CEB 73–3071)
– 14 6891980–250 . . TUBING, 0.250 IN. (6.35 MM) ID B AR
(DISC., PER 250 CEB 73–3071)
– 15 6897991–000 . . CABLE, SHIELDED, 12 IN. (304.8 MM) B AR
(DISC., PER 250 CEB 73–3071)
– 16 AS3085–111 . PACKING, 0.424 IN. (10.77 MM) ID B 2
(DISC., PER 250 CEB 73–3071)
16 A 23050812 . PLATE, COVER (ADDED, PER 250 CEB 73–3047, B 1
REF 250 CEB 73–3071)
16 B MS21043–3 . NUT, SLFLKG, 0.190–32 B 2
(ADDED, PER 250 CEB 73–3047,
REF 250 CEB 73–3071)
–––*–––
16 C 23050813 . GASKET, COVER PLATE B 1
(ADDED PER 250 CEB 73–3047, REF 250 CEB 73–3071)
17 MS9015–04 . PLUG, O.4375–20 B 3
19 6871534 . PLUG, MAGNETIC, 0.500–20 X 0.500–28 B 2
(UW 6825546 INSERT) (FRO 6896482,
20 AS3084–05 . . PACKING, 0.414 IN. (10.52 MM) ID B 2
– 21 6894110 KIT, MAGNETIC PLUG, QUICK–DISCONNECT B 1
(REF 250 CEB 72–3083)
22 6896483–1 . INSERT, FLANGED, MAGNETIC PLUG B 2
– 22 6896483–2 . INSERT, FLANGED, MAGNETIC PLUG, B AR
(0.003 IN. OS) (NOT KITTED)
– 22 6896483–3 . INSERT, FLANGED, MAGNETIC PLUG, B AR
(0.006 IN. OS) (NOT KITTED) (REF 250 CEB 72–3083)
23 MS9486–26 . PIN, 0.0938 X 0.250 IN. (2.383 X 6.35 MM) B 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY

25 6896482 . PLUG, MAGNETIC QUICK–DISCONNECT B 2
– 26 M83248/1–905 . . PACKING B ALT
27 FIG. REF . COVER ASSY, GEARBOX, POWER & ACCESSORY B REF
(REF 72–60–00, FIG. 13, FOR DETAILS)
27 A FIG. REF . HOUSING ASSY, GEARBOX, POWER & ACCESSORY B REF
28 MS21043–3 . NUT, SLFLKG, 0.190–32 B 34
30 MS21043–4 . NUT, SLFLKG, 0.250–28 B 17
–––*–––
32 6898642 . GEARSHAFT, SPUR, CENTRIFUGAL BREATHER B 1
– 33 6859432 . BEARING, BALL (25 X 42 X 9 MM) B 1
(REF 250 CEB 72–3104) (FRO 23007151)
– 33 6824744 . . BEARING, BALL (25 X 42 X 9 MM) B 1
(REF 250 CEB 72–3104) (FRO 23007151)
– 33 6842067 . . BEARING, BALL (25 X 42 X 9 MM) B ALT
33 23007151 . BEARING, BALL (25 X 42 X 9 MM) B 1
(FRO 6889150 OR 23005746)
– 34 23005746 . BEARING, BALL (12 X 37 X 12 MM) B ALT
– 35 6898985 . GEARSHAFT, SPUR, 77 TEETH IDLER (FRO 6898993) B 1
35 23007246 . GEARSHAFT, SPUR, 77 TEETH IDLER B 1
– 36 6859431 . BEARING, BALL (12 X 28 X 8 MM) (FRO 23008469) B 1
(REF 250 CEB 72–3104)
(REF 250 CEB 72–3104)
(SB 23005747, PER 250 CEB 72–3095)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY

38 23007247 . GEARSHAFT, SPUR, 26 TEETH IDLER B 1
(SB 23005747, PER 250 CEB 72–3095)
40 6898981 . GEARSHAFT, GENERATOR IDLER B 1
(FRO 6889150 OR 23005746)
43 6892285 . GEARSHAFT, STARTER GENERATOR B 1
– 43 23059587 . GEARSHAFT, STARTER GENERATOR B 1
45 6844316 . BRACKET, ANGLE, 90° B 3
(QTY ONE DISC., PER 250 CEB 73–3071)
46 6844317 . BRACKET, ANGLE, 90° B 3
(QTY ONE DISC. IN 23061913 GEARBOX ASSY,
FUEL CONTROL HEATER CONFIGURATION)
(REF 250 CEB 72–3202)
47 MS9593–074 . BRACKET, ANGLE, 90° (REF 250 CEB A–75–3021) B 1
48 MS9593–052 . BRACKET, ANGLE, 90° (REF 250 CEB A–75–3021) B 1
49 6893636 . BRACKET, START COUNTER MOUNTING B 1
– 50 6890500 . BRACKET, ELECTRICAL CONNECTOR, MAIN B 1
(R&R 23055442, PER 250 CEB 72–3181)
– 50 23053326 . BRACKET, ELECTRICAL CONNECTOR, MAIN B 1
(FRO 23055442)
50 23055442 . BRACKET, ELECTRICAL CONNECTOR B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
UNITS
1234567 CODE ASSY
51 AN100036 . COVER, ENGINE ACCESSORY DRIVE B 3

(REF 250 CEB 72–3066)
– 51 AS3222 . COVER, ENGINE ACCESSORY DRIVE B ALT
(REF 250 CEB 72–3066)
52 MS21043–5 . NUT, SLFLKG, 0.3125–24 (REF 250 CEB 72–3066) B 12
53 MS9320–11 . WASHER, 0.3125 IN. (7.93 MM) B 12
(REF 250 CEB 72–3066)
–––*–––
– 54 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE B 2
(REF 250 CEB 72–3066) (SB 23052955)
54 23052955 . GASKET, ENGINE ACCESSORY DRIVE B 2
55 23001829 . COVER, PLATE B 1
56 MS21043–3 . NUT, SLFLKG, 0.190–32 B 2
–––*–––
R – 57 23001831 . GASKET, PLATE (FRO 23054637) B 1
R 57 23054637 . GASKET, PLATE B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 1/00
72-60-00
FIGURE 2
PAGE 7
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30M)

72-60-00
FIGURE 3
PAGE 0
NOV 15/99
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30M)

72-60-00
FIGURE 3
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30M)
– 1 23005656 GEARBOX ASSY, POWER & ACCESSORY C 1

(R&R 23035181, PER 250 CEB 72–3158)
(REF 250 CEB 72–3145)
(FRO 23035181)
(REF 72–00–00, FIG. 3, FOR NHA)
2 6855339 . PLATE ASSY, IDENTIFICATION, GEARBOX C 1
R – 2 23064039 . . PLATE, IDENT, GEARBOX, BLANK (SB 23073667) C 1
R – 2 23073667 . . PLATE, IDENT, GEARBOX, BLANK C 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) C 2
– 4 MS35338–137 . WASHER, 0.164 IN. (4.17 MM) ID (FRO MS122054) C 2
4 MS122054 . WASHER, 0.164 IN. (4.166 MM) ID C 2
–––*–––
– 5 23001970 . NOZZLE ASSY, OIL, PINION BEARING C 1
(R&R 23034601, PER 250 CEB 72–3157)
(SB 23035174)
(R&R 23035174, PER 250 CEB 72–3158)
5 23035174 . NOZZLE ASSY, OIL, PINION BEARING C 1
(REF 250 CEB’S 72–3157 & 72–3158)
6 MS21043–3 . NUT, SLFLKG, 0.190–32 C 2
–––*–––
– 9 6899145 . PICKUP ASSY, DUAL COIL, N2 RPM (FRO 23007981) C 1
9 23007981 . PICKUP ASSY, DUAL COIL, N2 RPM C 1
10 MS21043–3 . NUT, SLFLKG, 0.190–32 C 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
12 M83723/75R12–12N . . CONNECTOR, PLUG C 1

– 12 A M83723/15A12 . . CONNECTOR, BACKSHELL C 1
– 12 A 2303418–12N . . CONNECTOR, BACKSHELL C ALT
13 NAS1745–7 . . SPLICE, 0.625 IN. (15.88 MM) LG C 2
– 13 A 6891980–375 . . TUBING, 0.375 IN. (9.53 MM) ID C AR
14 6891980–500 . . TUBING, 0.250 IN. (12.7 MM) ID C AR
15 6897991–000 . . CABLE, SHIELDED, 12 IN. (304.8 MM) C AR
17 MS9015–04 . PLUG, 0.4375–20 C 3
19 23005287 . PLUG, MAGNETIC, QUICK DISCONNECT C 2
20 M83248/1–012 . PACKING (FOR SERV USE & SPARE PARTS PROC) C AR
21 FIG. REF . COVER ASSY, GEARBOX, POWER & ACCESSORY C REF
21 A FIG. REF . HOUSING ASSY, GEARBOX, POWER & ACCESSORY C REF
22 MS21043–3 . NUT, SLFLKG, 0.190–32 C 32
(5.41 X 11.13 X 5.56 MM)
25 MS21043–4 . NUT, SLFLKG, 0.250–28 C 17
–––*–––
27 6898642 . GEARSHAFT, SPUR, CENTRIFUGAL BREATHER C 1
– 28 6859432 . BEARING, BALL (25 X 42 X 9 MM) (FOR SERV C 1
USE & SPARE PARTS PROC) (FRO 23007151)
– 28 6824744 . . BEARING, BALL (25 X 42 X 9 MM) C 1
– 28 6842067 . . BEARING, BALL (25 X 42 X 9 MM) C ALT
28 23007151 . BEARING, BALL (25 X 42 X 9 MM) C 1
(FRO 6889150 OR 23005746)
– 29 6889150 . BEARING, BALL (12 X 37 X 12 MM) C 1
– 29 23005746 . BEARING, BALL (12 X 37 X 12 MM) C ALT
– 30 6898985 . GEARSHAFT, SPUR, 77 TEETH IDLER (FRO 6898993) C 1
30 23007246 . GEARSHAFT, SPUR, 77 TEETH IDLER C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY
– 31 6859431 . BEARING, BALL (12 X 28 X 8 MM) (FRO 23008469) C 1

(SB 23005747, PER 250 CEB 72–3095)
33 23007247 . GEARSHAFT, SPUR, 26 TEETH IDLER C 1
(SB 23005747, PER 250 CEB 72–3095)
35 6898981 . GEARSHAFT, GENERATOR IDLER C 1
(FRO 6889150 OR 23005746)
38 6892285 . GEARSHAFT, STARTER GENERATOR C 1
– 38 23059587 . GEARSHAFT, STARTER GENERATOR C 1
40 6844316 . BRACKET, ANGLE, 90° C 2
41 6844317 . BRACKET, ANGLE, 90° C 2
42 MS9593–015 . BRACKET, ANGLE, 90° C 1
43 MS9593–052 . BRACKET, ANGLE, 90° C 1
44 6893636 . BRACKET, START COUNTER MOUNTING C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 1/00
UNITS
1234567 CODE ASSY
45 AN100036 . COVER, ENGINE ACCESSORY DRIVE C 2

– 45 AS3222 . COVER, ENGINE ACCESSORY DRIVE C ALT
46 MS21043–5 . NUT, SLFLKG, 0.3125–24 C 8
47 MS9320–11 . WASHER, 0.3125 IN. (7.93 MM) C 8
–––*–––
– 48 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE (FRO 23052955) C 2
48 23052955 . GASKET, ENGINE ACCESSORY DRIVE C 2
– 49 6898540 . PICKUP ASSY, MAGNETIC, N1 (FRO 23007979) C 1
49 23007979 . PICKUP ASSY, MAGNETIC, N1 C 1
50 MS21043–3 . NUT, SLFLKG, 0.190–32 C 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 1/00
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30G/2)

72-60-00
FIGURE 4
PAGE 0
NOV 15/99
GEARBOX ASSY, POWER & ACCESSORY (COVER) (250–C30G/2)

72-60-00
FIGURE 4
PAGE 1
NOV 15/99
UNITS
1234567 CODE ASSY

(250–C30G/2)
– 1 23053960 . GEARBOX ASSY, POWER & ACCESSORY F 1

(REF 72–00–00, FIG. 1, FOR NHA)
2 6855339 . PLATE ASSY, IDENTIFICATION, GEARBOX F 1
R – 2 23064039 . . PLATE, IDENT, GEARBOX, BLANK (SB 23073667) F 1
R – 2 23073667 . . PLATE, IDENT, GEARBOX, BLANK F 1
3 MS35206–241 . SCREW, 0.164–32 X 0.250 IN. (6.35 MM) F 2
– 4 MS35338–137 . WASHER, 0.164 IN. (4.17 MM) ID (FRO MS122054) F 2
4 MS122054 . WASHER, 0.164 IN. (4.17 MM) ID F 2
–––*–––
5 23035174 . NOZZLE ASSY, OIL, PINION BEARING F 1
6 MS21043–3 . NUT, SLFLKG, 0.190–32 F 2
–––*–––
8 AS3085–010 . PACKING, 0.239 IN. (6.07 MM) ID F 1
9 23007981 . PICKUP ASSY, DUAL COIL, N2 RPM F 1
10 MS21043–3 . NUT, SLFLKG, 0.190–32 F 2
–––*–––
12 M83723/75R12–12N . . CONNECTOR, PLUG F 1
– 12 M83723/15A–12 . . CONNECTOR, BACKSHELL F 1
– 12 2303418–12N . . CONNECTOR, BACKSHELL F ALT
13 NAS1745–7 . . SPLICE, 0.625 IN. (15.88 MM) LG F 2
– 13 A 6891980–375 . . TUBING, 0.375 IN. (9.53 MM) ID F AR
14 6891980–500 . . TUBING, 0.500 IN. (12.7 MM) ID F AR
15 6897991–000 . . CABLE, SHIELDED, 12 IN. (304.8 MM) F AR
17 MS9015–04 . PLUG, 0.4375–20 F 3
19 23005287 . PLUG, MAGNETIC, QUICK DISCONNECT F 2
19 A M83248/1–012 . PACKING (FOR SERV USE & SPARE PARTS PROC) F AR
20 FIG. REF . COVER ASSY, GEARBOX, POWER & ACCESSORY F REF
21 FIG. REF . HOUSING ASSY, GEARBOX, POWER & ACCESSORY F REF

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
22 MS21043–3 . NUT, SLFLKG, 0.190–32 F 34
23 6893634 . SPACER, 0.213 ID X 0.438 OD X 0.220 IN. F 2
(5.41 X 11.125 X 5.558 MM)
25 MS21043–4 . NUT, SLFLKG, 0.250–28 F 17
–––*–––
27 6898642 . GEARSHAFT, SPUR, CENTRIFUGAL BREATHER F 1
28 23007151 . BEARING, BALL (25 X 42 X 9 MM) F 1
– 28 23053331 . BEARING, BALL (25 X 42 X 9 MM) F ALT
30 23007246 . GEARSHAFT, SPUR, 77 TEETH IDLER F 1
33 23007247 . GEARSHAFT, SPUR, 26 TEETH IDLER F 1
(REF 250 CEB 72–3095)
35 6898981 . GEARSHAFT, GENERATOR IDLER F 1
38 6892285 . GEARSHAFT, STARTER GENERATOR F 1
– 38 23059587 . GEARSHAFT, STARTER GENERATOR F 1
40 6844316 . BRACKET, ANGLE, 90° F 4
41 6844317 . BRACKET, ANGLE, 90° F 1
42 MS9593–015 . BRACKET, ANGLE, 90° F 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
43 MS9593–074 . BRACKET, ANGLE, 90° F 1

44 23007164 . BRACKET, PC FILTER F 1
45 6893636 . BRACKET, START COUNTER MOUNTING F 1
– 46 23057107 . COVER, ENGINE ACCESSORY DRIVE (FRO 23061904) F 1
R – 46 23061904 . COVER, ENGINE ACCESSORY DRIVE, SQUARE F 1
(S P/N AN100036)
(S P/N AS3222) (SB 23066654, PER 250 CEB 72–3235)
R 46 23066654 . COVER, ENGINE ACCESSORY DRIVE, SQUARE F 1
(REF 250 CEB 72–3235)
47 MS21043–01 . NUT, SLFLKG, 0.3125–24 F 4
48 MS9320–11 . WASHER, 0.3125 IN. (7.93 MM) F 4
–––*–––
50 23007979 . PICKUP ASSY, MAGNETIC, N1 F 1
51 MS21043–5 . NUT, SLFLKG, 0.190–32 F 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
72-60-00
FIGURE 4
PAGE 5
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (COVER SEALS & SPUR GEARSHAFTS)
(250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 5
PAGE 0
NOV 15/99
(250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 5
PAGE 1
SEP 1/98
(250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 5
PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
5 GEARBOX ASSY, POWER & ACCESSORY

(COVER SEALS & SPUR GEARSHAFTS)
(250–C30, –C30S, –C30P, –C30M, –C30G)
– FIG. REF GEARBOX ASSY, POWER & ACCESSORY REF

(REF 72–60–00, FIGS. 1, 2 & 3)
1 6889157 . GEARSHAFT ASSY, SPUR, POWER TRAIN 1
TACHOMETER & GOVERNOR
2 MS9047–068 . . PIN, 0.094 X 0.438 IN. (2.39 X 11.13 MM) 1
– 3 6859431 . BEARING, BALL (12 X 28 X 8 MM) (SB 23008469) 1
3 6824741 . . BEARING, BALL (12 X 28 X 8 MM) 1
– 3 6824742 . . BEARING, BALL (12 X 28 X 8 MM) ALT
– 3 23008469 . BEARING, BALL (12 X 28 X 8 MM) 1
4 6824744 . . BEARING, BALL (25 X 42 X 9 MM) 1
– 5 6898984 . GEARSHAFT ASSY, FUEL CONTROL, OIL PUMP 1
(SB 6899156)
– 5 6899156 . GEARSHAFT ASSY, FUEL CONTROL, OIL PUMP 1
(SB 23007248)
5 23007248 . GEARSHAFT ASSY, FUEL CONTROL, OIL PUMP 1
6 6889197 . RING, RETAINING 1
–––*–––
7 6888621 . . PIN, 0.125 X 0.938 IN. (3.18 X 23.83 MM) 1
8 6889196 . . ADAPTER, SPLINED 1
9 23007157 . BEARING, BALL (25 X 62 X 17 MM) 1
10 6840380–98 . RING, RETAINING 1
–––*–––
11 6840109 . RETAINER, BEARING 1
– 12 6824744 . . BEARING, BALL (25 X 42 X 9 MM) 1
13 6889198 . SPACER, SLEEVE, GEARSHAFT BEARING 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
R – 15 6893673 . GEARSHAFT ASSY, HELICAL TORQUEMETER ABCD 1

(R&R 23071895, PER 250 CEB 72–3244)
R 15 23071895 . GEARSHAFT ASSY, HELICAL TORQUEMETER ABCD 1
– 16 23039779 . GEARSHAFT ASSY, HELICAL TORQUEMETER E 1
(SB 23039777)
R – 16 23039777 . GEARSHAFT ASSY, HELICAL TORQUEMETER E 1
(R&R 23071897, PER 250 CEB 72–3244)
R 16 23071897 . GEARSHAFT ASSY, HELICAL TORQUEMETER E 1
R – 17 6892838 . . RING, RETAINING, INT, 7.250 IN. (184.15 MM) 1
(R&R 23071792, PER 250 CEB 72–3244)
R 17 23071792 . . RING, RETAINING, INT, 7.250 IN. (184.15 MM) 1
18 23039776 . . RING, RETAINING, INT, 5.000 IN. (127.00 MM) E 1
19 6898558 . SUPPORT, TORQUEMETER BEARING & SHAFT 1
20 MS9490–26 . BOLT, 0.250–28 X 1.750 IN. (44.45 MM) 3
21 MS9276–10 . WASHER, 0.250 (6.35 MM) 3
–––*–––
22 6889193 . JOURNAL, REAR TORQUEMETER BEARING 1
23 6895007 . BEARING, ROLLER (55 X 90 X 18 MM) 1
24 6889191 . SUPPORT, TORQUEMETER & JOURNAL, FLANGED 1
25 MS21043–3 . NUT, SLFLKG, 0.190–32 4
–––*–––
R – 26 6898785 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF ABCD 1
(R&R 23068295, PER 250 CEB 72–3226)
26 23068295 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF ABCD 1
– 26 23059588 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF ABCD 1
R 26 A AS3216–124 . RING, RETAINING, SPIRAL, EXT, 1.44 IN. ID ABCD 1
(36.58 MM) (UW 23068295 GEARSHAFT ASSY)
(REF 250 CEB 72–3226)
– 27 23039780 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF E 1
(SB 23039778)
27 23039778 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF E 1
28 6892073 . . RING, RETAINING, 6.375 IN. (161.93 MM) ABCD 1
29 23039775 . . RING, RETAINING, INTERNAL E 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
30 FIG. REF . BEARING, INNER RACE (REF 72–60–00, REF

FIG. 7, FOR OUTER RACE & ROLLERS)
– 32 23005277 . CAGE, FLANGED, 2–1/2 BEARING SUPPORT 1
(SB OR R&R 23035272, PER 250 CEB 72–3193)
32 23035272 . CAGE, FLANGED, 2–1/2 BEARING SUPPORT 1
33 MS21043–3 . NUT, SLFLKG, 0.190–32 6
–––*–––
34 23007202 . BEARING, ROLLER, NO. 2–1/2 (29 X 42 X 9 MM) 1
(ADDED, PER 250 CEB 72–3059)
– 34 6871062 . BEARING, ROLLER, NO. 2–1/2 (29 X 42 X 9 MM) ALT
(ADDED, PER 250 CEB 72–3059)
35 6726656–168 . RING, RETAINING, INTERNAL 1
(ADDED, PER 250 CEB 72–3059)
–––*–––
36 23005273 . SPACER, SLEEVE, 2–1/2 BEARING 1
(UW 23005277 CAGE) (ADDED, PER 250 CEB 72–3059)
37 6893672 . GEAR, HELICAL, POWER TRAIN PINION 1
38 6726656–356 . RING, RETAINING 1
– 39 6889321 . BEARING, BALL (55 X 90 X 18 MM) ABC 2
(SB 23004219, PER 250 CEB 72–3039)
(SB 23031219, PER 250 CEB 72–3193)
– 39 23031219 . BEARING, ROLLER (55 X 90 X 18 MM) 2
(REF 250 CEB 72–3157)
(SB 23030917, PER 250 CEB 72–3193) (DISC.)
– 39 23031458 . BEARING, ROLLER (55 X 90 X 18 MM) ALT
(REF 250 CEB 72–3157)
(SB 23030917, PER 250 CEB 72–3193) (DISC.)
R – 39 23030917 . BEARING, ROLLER (55 X 90 X 18 MM) NO. 3 & 4 2
(SB 23066678, PER 250 CEB A–72–3217)
R 39 23066678 . BEARING, ROLLER (55 X 90 X 18 MM) NO. 3 & 4 2
(REF 250 CEB A–72–3217)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
UNITS
1234567 CODE ASSY
R – 40 6854424 . SEAL, PLAIN ENCASED, 0.875 IN. SHAFT (22.23 MM) 3

X 0.312 IN. WIDE (7.92 MM) (FRO 23063371)
R 40 23063371 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 0.8735 IN. 3
(22.187 MM) DIA, CW–ROTATING SHAFT (BROWN)
R – 41 6854086 . SEAL, PLAIN ENCASED, 1.562 IN. (39.68 MM) ABCD 1
LIP–TYPE (FRO 23063369)
R 41 23063369 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 1.5605 IN. ABCD 1
R – 42 6854424 . SEAL, PLAIN ENCASED, 0.875 IN. SHAFT (22.23 MM) B 1
X 0.312 IN. WIDE (7.92 MM) (FRO 23063371)
R 42 23063371 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 0.8375 IN. B 1
43 6898835 . GEARSHAFT, SPARE DRIVE, HELICAL & SPUR B 1
(DISC., PER 250 CEB 72–3166)
44 6898829 . GEARSHAFT, 15 HP, SPARE DRIVE B 1
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
(DISC., PER 250 CEB 72–3166)
48 6889312 . PLUG, SLFLKG, O–RING SEAL (DISC.) B 1
49 AS3085–113 . PACKING, 0.549 IN. (13.95 MM) ID (DISC.) B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
72-60-00
FIGURE 5
PAGE 7
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (COVER SEALS & SPUR GEARSHAFTS) (250–C30G/2)
72-60-00
FIGURE 6
PAGE 0
NOV 15/99
GEARBOX ASSY, POWER & ACCESSORY (COVER SEALS & SPUR GEARSHAFTS) (250–C30G/2)
72-60-00
FIGURE 6
PAGE 1
DEC 15/01
UNITS
1234567 CODE ASSY

(COVER SEALS & SPUR GEARSHAFTS) (250–C30G/2)
– FIG. REF GEARBOX ASSY, POWER & ACCESSORY F REF

(REF 72–60–00, FIG. 4)
1 6889157 . GEARSHAFT ASSY, SPUR, POWER TRAIN F 1
TACHOMETER & GOVERNOR
2 MS9047–068 . . PIN, 0.094 X 0.438 IN. (2.39 X 11.13 MM) F 1
5 23007248 . GEARSHAFT ASSY, FUEL CONTROL, OIL PUMP F 1
6 6889197 . RING, RETAINING F 1
–––*–––
7 6888621 . . PIN, 0.125 X 0.938 IN. (3.18 X 23.83 MM) F 1
8 6889196 . . ADAPTER, SPLINED F 1
10 6840380–98 . RING, RETAINING F 1
–––*–––
11 6840109 . RETAINER, BEARING F 1
13 6889198 . SPACER, SLEEVE, GEARSHAFT BEARING F 1
R – 15 23039777 . GEARSHAFT ASSY, HELICAL TORQUEMETER F 1
(R&R 23071897, PER 250 CEB 72–3244)
R 15 23071897 . GEARSHAFT ASSY, HELICAL TORQUEMETER F 1
R – 16 6892838 . . RING, RETAINING, INTERNAL, 7.250 IN. (184.15 MM) F 1
(R&R 23071792, PER 250 CEB 72–3244)
R 16 23071792 . . RING, RETAINING, INTERNAL, 7.250 IN. (184.15 MM) F 1
R 16 A 23039776 . . RING, RETAINING, INTERNAL, 5.000 IN. (127.00 MM) F 1
17 6898558 . SUPPORT, TORQUEMETER BEARING & SHAFT F 1
18 MS9490–26 . BOLT, 0.250–28 X 1.750 IN. (44.45 MM) F 3
19 MS9276–10 . WASHER, 0.250 (6.35 MM) F 3
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 15/99
UNITS
1234567 CODE ASSY
20 6889193 . JOURNAL, REAR TORQUEMETER BEARING F 1

21 6895007 . BEARING, ROLLER (55 X 90 X 18 MM) F 1
22 6889191 . SUPPORT, TORQUEMETER & JOURNAL, FLANGED F 1
23 MS21043–3 . NUT, SLFLKG, 0.190–32 F 4
–––*–––
24 23053967 . GEARSHAFT ASSY, HELICAL POWER TAKEOFF F 1
25 23039775 . . RING, RETAINING, INTERNAL F 2
26 6726656–314 . RING, RETAINING, INTERNAL F 1
28 23053975 . SPACER, SEAL (REAR) (FRO 23059575) F 1
– 28 23059575 . SPACER, SEAL (REAR) F 1
– 29 23053970 . DRIVE, REAR, PTO F 1
(SB 23061918, PER 250 CEB 72–3201)
29 23061918 . DRIVE, REAR, PTO F 1
31 23053968 . SEAL, CARBON–MAGNETIC, 2.5625 IN. OD X F 1
1.998 IN. ID (65.088 X 50.75 MM)
31 A 23059566–136 . PACKING, INNER DIA OF CARBON/MAGNETIC F AR
SEAL, 1.970–2.004 IN. (50.04–50.90 MM) ID
31 B 23059566–142 . PACKING, OUTER DIA OF CARBON/MAGNETIC F AR
SEAL, 2.342–2.382 IN. (59.49–60.50 MM) ID
31 B AS3209–142 . PACKING, OUTER DIA OF CARBON/MAGNETIC F ALT
SEAL, 2.342–2.382 IN. (59.49–60.50 MM) ID
– 32 23053973 . RETAINER, SEAL, REAR (FRO 23057750) F 1
32 23057750 . RETAINER, SEAL, REAR F 1
33 MS21043–4 . NUT, SLFLKG, 0.250–28 F 6
–––*–––
35 AS3068–14 . NUT, SLFLKG, 0.500–20 F 1
(UW 23053974 TIE BOLT, REF FIG. 8)
– 35 AS3069–14 . NUT, SLFLKG, 0.500–20 F ALT
– 35 6828831–918 . NUT, SLFLKG, 0.500–20 F ALT
– 35 6843618–080 . NUT, SLFLKG, 0.500–20 F ALT
– 35 6859503–8 . NUT, SLFLKG, 0.500–20 F ALT
36 AN960XC916L . WASHER, 0.562 IN. (14.27 MM) ID F 1
(UW 23053974 TIE BOLT, REF FIG. 8)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
37 23035272 . CAGE, FLANGED, 2–1/2 BEARING SUPPORT F 1

(REF 250 CEB 72–3193)
38 MS21043–3 . NUT, SLFLKG, 0.190–32 F 6
–––*–––
39 23007202 . BEARING, ROLLER, NO. 2–1/2 (29 X 42 X 9 MM) F 1
– 39 6871062 . BEARING, OUTER RACE & ROLLER (42 X 9 MM) F ALT
–––*–––
41 23005273 . SPACER, SLEEVE, NO. 2–1/2 BEARING F 1
42 6893672 . GEAR, HELICAL, POWER TRAIN PINION F 1
– 44 23031219 . BEARING, ROLLER (55 X 90 X 18 MM) NO. 3 & 4 F 2
(REF 250 CEB 72–3157)
(SB 23030917, PER 250 CEB 72–3193) (DISC.)
– 44 23031458 . BEARING, ROLLER (55 X 90 X 18 MM) F ALT
(REF 250 CEB 72–3157)
(SB 23030917, PER 250 CEB 72–3193) (DISC.)
R – 44 23030917 . BEARING, ROLLER (55 X 90 X 18 MM, NO. 3 & 4 F 2
(SB 23066678, PER 250 CEB A–72–3217)
R 44 23066678 . BEARING, ROLLER (55 X 90 X 18 MM) NO. 3 & 4 F 2
(REF 250 CEB A–72–3217)
R – 45 6854424 . SEAL, PLAIN ENCASED, 0.875 IN. SHAFT (22.23 MM) F 3
X 0.312 IN. WIDE (7.92 MM) (FRO 23063371)
R 45 23063371 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 0.8375 IN. F 3

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
72-60-00
FIGURE 6
PAGE 5
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (HOUSING)

(250–C30, –C30S, –C30P, –C30M, –C30G)
FIGURE 7
72-60-00
FIGURE 7
PAGE 0
DEC 15/01
UNITS
1234567 CODE ASSY
7 GEARBOX ASSY, POWER & ACCESSORY (HOUSING)

(250–C30, –C30S, –C30P, –C30M, –C30G)

(REF 72–60–00, FIGS. 1, 2 & 3)
1 6889336 . BEARING, BALL, 40 X 80 X 18 MM 1
2 6840380–78 . RING, RETAINING 1
– 3 6889164 . PISTON ASSY, TORQUEMETER (FRO 6893613) AD 1
– 3 6893613 . PISTON ASSY, TORQUEMETER (FRO 6889164) 1
3 6889164 . PISTON ASSY, TORQUEMETER 1
4 MS171592 . . PIN, 0.188 X 0.875 IN. (4.76 X 22.23 MM) 1
5 6889160 . RING, PISTON 1
6 6893071 . RING, EXPANDER 1
7 6889158 . SHAFT ASSY, TORQUEMETER SUPPORT 1
8 6889163 . NUT, TORQUEMETER SUPPORT SHAFT 1
9 6889162 . WASHER, INTERNAL FLARED 1
–––*–––
10 MS171592 . . PIN, 0.188 X 0.875 IN. (4.76 X 22.23 MM) 1
11 6898707 . . SCREEN, FILTER, ETCHED 1
(S P/N AS3085–140)
14 6889161 . WASHER, FLAT 1
16 6826835 . GEAR, SPUR, POWER TRAIN IDLER 1
– 17 AN104620 . BOLT, 0.190–32 X 1.250 IN. (31.75 MM) 1
(SB MS9489–27, PER 250 CEB 72–3121)
17 MS9489–27 . BOLT, 0.190–32 X 1.875 IN. (47.62 MM) 1
18 MS21043–3 . NUT, SLFLKG, 0.190–32 1
(ADDED, PER 250 CEB 72–3121)
19 MS9320–09 . WASHER, 0.190 IN. (4.83 MM) ID 1
(ADDED, PER 250 CEB 72–3121)
– 20 6810421 . WASHER, KEY (DISC., PER 250 CEB 72–3121) 1
– 21 6820588 . WASHER, KEYWAY, BEARING RETAINING 1
(SB 23008017, PER 250 CEB 72–3121)
21 23008017 . WASHER, KEYWAY, BEARING RETAINER 1
(ADDED, PER 250 CEB 72–3121)
(ADDED, PER 250 CEB 72–3121)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 7
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
24 MS16625–4112 . RING, 1.252 IN. (31.80 MM) OD 1

– 25 6859431 . BEARING, BALL, 12 X 28 X 8 MM (FRO 23008469) 1
– 25 6824741 . . BEARING, BALL, 12 X 28 X 8 MM 1
– 25 6824742 . . BEARING, BALL, 12 X 28 X 8 MM ALT
25 23008469 . BEARING, BALL, 12 X 28 X 8 MM 1
– 26 6820586 . SHAFT, SUPPORT, IDLER GEAR 1
(R&R 23008018, PER 250 CEB 72–3121)
26 23008018 . SHAFT, SUPPORT, IDLER GEAR 1
– 27 23053962 . BEARING, ROLLER (40 X 80 X 18 MM) (FRO 6889337) 1
(REF 72–60–00, FIG. 4, FOR INNER RACE)
28 6889300 . SUPPORT, SEAL 1
29 MS21043–3 . NUT, 0.190–32 3
–––*–––
X 0.312 IN. WIDE (7.92 MM) (FRO 23063371)
X 0.312 IN. WIDE (7.92 MM) (FRO 23063372)
(22.187 MM) DIA, CCW–ROTATING SHAFT (BLACK)
(FRO 23064567)
(11.087 MM) CCW–ROTATING SHAFT (BLACK)
R – 34 6854086 . SEAL, PLAIN ENCASED, 1.562 IN. (39.68 MM) ABCD 1
LIP–TYPE (FRO 23063370)
R 34 23063370 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 1.5605 IN. ABCD 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 7
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
72-60-00
FIGURE 7
PAGE 3
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (HOUSING) (250–C30G/2)

72-60-00
FIGURE 8
PAGE 0
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (HOUSING) (250–C30G/2)

72-60-00
FIGURE 8
PAGE 1
DEC 15/01
UNITS
1234567 CODE ASSY
8 GEARBOX ASSY, POWER & ACCESSORY (HOUSING)

(250–C30G/2)
– FIG. REF GEARBOX ASSY, POWER & ACCESSORY F REF

(REF 72–60–00, FIG. 4)
2 6840380–78 . RING, RETAINING F 1
3 6889164 . PISTON ASSY, TORQUEMETER F 1
4 MS171592 . . PIN, 0.188 X 0.875 IN. (4.76 X 22.23 MM) F 1
5 6889160 . RING, PISTON F 1
6 6893071 . RING, EXPANDER F 1
7 6889158 . SHAFT ASSY, TORQUEMETER SUPPORT F 1
8 6889163 . NUT, TORQUEMETER SUPPORT SHAFT F 1
9 6889162 . WASHER, INTERNAL FLARED F 1
–––*–––
10 MS171592 . . PIN, 0.188 X 0.875 IN. (4.76 X 22.23 MM) F 1
11 6898707 . . SCREEN, FILTER, ETCHED F 1
14 6889161 . WASHER, FLAT F 1
15 6895007 . BEARING, ROLLER, 55 X 90 X 18 MM F 1
16 6826835 . GEAR, SPUR, POWER TRAIN IDLER F 1
R 17 MS9489–27 . BOLT, 0.190–32 X 1.875 IN. (47.62 MM) F 1
18 MS21043–3 . NUT, SLFLKG, 0.190–32 F 1
20 23008017 . WASHER, KEYWAY, BEARING RETAINER F 1
–––*–––
23 MS16625–4112 . RING, 1.252 IN. (31.80 MM) ID F 1
25 23008018 . SHAFT, SUPPORT, IDLER GEAR F 1
26 6889300 . SUPPORT, SEAL F 1
27 MS21043–3 . NUT, SLFLKG, 0.190–32 F 3
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 8
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
29 6854424 . SEAL, PLAIN ENCASED, 0.875 IN. SHAFT (22.23 MM) F 2

X 0.312 IN. WIDE (7.92 MM)
R – 29 23063371 . SEAL, PLAIN ENCASED, HYDRODYNAMIC, 0.8375 IN. F AR
30 23053974 . TIEBOLT, POWER TAKEOFF DRIVE F 1
31 AN960XC916L . WASHER, 0.562 IN. (14.27 MM) ID F 1
– 32 23056601 . DRIVE, FRONT, PTO (FRO 23059591) F 1
– 32 23059591 . DRIVE, FRONT, PTO F 1
(R&R 23061917, PER 250 CEB 72–3201)
– 32 23061917 . DRIVE, FRONT, PTO (FRO 23064617) F 1
32 23064617 . DRIVE, FRONT, PTO F 1
– 34 23053972 . RETAINER, SEAL & BEARING FRONT (FRO 23057146) F 1
34 23057146 . RETAINER, SEAL & BEARING FRONT F 1
35 MS21043–4 . NUT, SLFLKG, 0.250–28 F 6
–––*–––
38 23053968 . SEAL, CARBON, MAGNETIC, FRONT, PTO F 1
38 A 23059566–136 . PACKING, ID OF CARBON–MAGNETIC SEAL, F AR
1.970–2.004 IN. (50.04–50.90 MM) ID
38 B 23059566–142 . PACKING, OD OF CARBON–MAGNETIC SEAL, F AR
2.342–2.382 IN. (59.49–60.50 MM) ID
– 38 AS3209–142 . PACKING, OD OF CARBON–MAGNETIC SEAL, F ALT
2.342–2.382 IN. (59.49–60.50 MM) ID
39 23053971–1 . SHIM, 80 MM OD X 0.0450–0.0469 IN. F AR
(1.143–1.191 MM) THK (FRO 23060421–1)
– 39 23053971–2 . SHIM, 80 MM OD X 0.0470–0.0489 IN. F AR
(1.194–1.124 MM) THK (FRO 23060421–2)
– 39 23053971–3 . SHIM, 80 MM OD X 0.0490–0.0509 IN. F AR
(1.124–1.293 MM) THK (FRO 23060421–3)
– 39 23053971–4 . SHIM, 80 MM OD X 0.0510–0.0529 IN. F AR
(1.1295–1.344 MM) THK (FRO 23060421–4)
– 39 23053971–5 . SHIM, 80 MM OD X 0.0530–0.0549 IN. F AR
(1.346–1.394 MM) THK (FRO 23060421–4)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 8
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
UNITS
1234567 CODE ASSY
– 39 23060421–1 . SHIM, 80 MM OD X 0.019–0.021 IN. (0.48–0.53 MM) THK F AR

40 23053962 . BEARING, BALL DOUBLE–ROW (40 X 80 X 35 MM) F 1
(FRO 23064567)
X 0.312 IN. WIDE (7.92 MM) (FRO 23063371)
X 0.312 IN. WIDE (7.92 MM) (FRO 23063372)
(22.187 MM) DIA, CCW–ROTATING SHAFT (BLACK)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 8
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
72-60-00
FIGURE 8
PAGE 5
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (FILTER HOUSING & OIL TUBES)
FIGURE 9
72-60-00
FIGURE 9
PAGE 0
NOV 15/99
UNITS
1234567 CODE ASSY

(FILTER HOUSING & OIL TUBES)

(REF 72–60–00, FIGS. 1, 2, 3 & 4)
– 1 6895097 . INDICATOR ASSY, DIFFERENTIAL PRESSURE ACD 1
(SB 23001955, PER 250 CEB 72–3075)
1 23001955 . INDICATOR ASSY, DIFFERENTIAL PRESSURE ACDEF 1
2 AS3085–014 . PACKING, 0.489 IN. (12.421 MM) ID ACDEF 1
3 AS3085–016 . PACKING, 0.614 IN. (15.596 MM) ID ACDEF 1
4 6895096 . CAP, OIL FILTER ACDEF 1
5 6899407 . CAP, OIL FILTER B 1
6 MS21043–3 . NUT, SLFLKG, 0.190–32 2
7 MS9320–09 . WASHER, 0.190 IN. (4.83 MM) ID 2
–––*–––
– 9 6896872 . FILTER ASSY, LUBE OIL (FRO 6898947) AD 1
9 6898947 . FILTER ASSY, LUBE OIL ACDEF 1
– 9 6898954 . FILTER ASSY, LUBE OIL (FRO 23030880) ACD 1
– 9 23030880 . FILTER ELEMENT, LUBE OIL ACDEF ALT
– 9 23009677 . FILTER ELEMENT, LUBE OIL ACDEF ALT
10 AS3085–013 . . PACKING, 0.426 IN. (10.820 MM) ID ACDEF 2
11 6870032 . FILTER ASSY, LUBE OIL B 1
R – 11 6840523 . . FILTER ASSY, LUBE OIL B ALT
– 11 6856089 . . FILTER ASSY, LUBE OIL B ALT
– 11 23068245 . . FILTER ASSY, LUBE OIL B ALT
13 6895090 . HOUSING ASSY, FILTER, LUBE OIL 1
14 MS21043–3 . NUT, SLFLKG, 0.190–32 8
15 MS9320–09 . WASHER, 0.190 IN. (4.83 MM) ID 8
–––*–––
16 6843386 . . GUIDE ASSY, POPPET, PRESSURE REGULATOR 1
VALVE
17 AS3085–020 . . PACKING, 0.864 IN. (21.946 MM) ID 1
18 6809796 . . SPRING, HELICAL COMPRESSION, 0.307 X 2.239 IN. 1
(7.798 X 56.871 MM)
19 6840111 . . POPPET, VALVE, PRESSURE, REGULATOR 1
20 MS16627–4075 . . RING, 0.808 IN. (20.523 MM) OD 1
21 6871784 . . GUIDE, POPPET, FILTER BYPASS VALVE 1
22 AS3085–015 . . PACKING, 0.551 IN. (13.995 MM) ID 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 9
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
23 6810345 . . SPRING, HELICAL COMPRESSION, 0.307 X 1.040 IN. 1

(7.798 X 26.416 MM)
24 6820557 . . POPPET, VALVE 1
R – 25 6895093 . . HOUSING ASSY, FILTER, LUBE OIL 1
(R&R 23035105, PER 250 CEB 72–3154)
R 25 23035105 . . HOUSING ASSY, FILTER, LUBE OIL 1
(REF 250 CEB 72–3154)
26 6887099–1 . . . STUD, STEPPED, SHOULDERED, 0.250–20 X 2
0.190–32 X 1.200 IN. (30.48 MM)
– 26 6887099–2 . . . STUD (0.003 IN. OS) AR
– 26 6887099–3 . . . STUD, 0.006 IN. OS) AR
27 6895094 . . . STANDPIPE, OIL FILTER 1
28 6820556–01 . . . SEAT, VALVE, FILTER BYPASS 2
0.6590–0.6600 IN. (16.739–16.764 MM)
– 28 6820556–02 . . . SEAT, VALVE, 0.6602–0.6612 IN. AR
(16.769–16.794 MM)
– 28 6820556–03 . . . SEAT, VALVE, 0.6614–0.6624 IN. AR
(16.800–16.825 MM)
– 28 6820556–04 . . . SEAT, VALVE, 0.6626–0.6636 IN. AR
(16.830–16.855 MM)
– 28 6820556–05 . . . SEAT, VALVE, 0.6638–0.6648 IN. AR
(16.861–16.886 MM)
– 28 6820556–06 . . . SEAT, VALVE, 0.6650–0.6660 IN. AR
(16.891–16.916 MM)
R – 28 A 23035106–1 . . . BUSHING, FLANGED, 0.600 X 0.490 IN. 3
(15.24 MM OD X 12.45 MM ID) (UIA 23035105)
(REF 250 CEB 72–3154)
R – 28 A 23035106–2 . . . BUSHING (0.0006 IN. OS) (UIA 23035105) AR
(REF 250 CEB 72–3154)
R – 28 A 23035106–3 . . . BUSHING (0.0012 IN. OS) (UIA 23035105) AR
(REF 250 CEB 72–3154)
– 29 6840113 . GASKET, FILTER HOUSING (SB 23053996) 1
29 23053996 . GASKET, FILTER HOUSING 1
30 6889177 . TUBE, OIL TRANSFER, OIL FILTER INLET 1
31 6889178 . TUBE, OIL TRANSFER, PRESSURE REGULATOR 1
BYPASS FILTER HOUSING

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 9
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 15/99
UNITS
1234567 CODE ASSY
– 33 6896856 . JET, PRESSURE OIL, POWER TAKEOFF GEAR ABCD 1

(R&R 23007243, PER 250 CEB 72–3086)
(UW 23008457 PUMP ASSY)
(R&R 23030998, PER 250 CEB 72–3152)
(UW 23031459 PUMP ASSY) (FRO 23068298)
33 23068298 . JET, PRESSURE OIL, POWER TAKEOFF GEAR ABCD 1
34 MS21043–3 . NUT, SLFLKG, 0.190–32 ABCD 1
35 MS9320–09 . WASHER, 0.190 IN. (4.83 MM) ID ABCD 1
(NOT REQD WITH 23030998 JET)
–––*–––
36 AS3085–011 . PACKING, 0.301 IN. (7.65 MM) ID ABCD 1
37 23038239 . PLUG, OIL PRESSURE E 1
38 MS21043–3 . NUT, SLFLKG, 0.190–32 E 1
–––*–––
39 AS3085–011 . PACKING, 0.301 IN. (7.65 MM) ID E 1
– 40 6896458 . TUBE, OIL DELIVERY, POWER ACCESSORY A 1
GEARBOX (R&R 6899353, PER 250 CEB 72–3013
OR R&R 23001802, PER 250 CEB 72–3022)
R – 40 6899353 . TUBE, OIL DELIVERY, POWER ACCESSORY A 1
GEARBOX (R&R 23001802, PER 250 CEB 72–3022)
R – 40 23001802 . TUBE ASSY, OIL DELIVERY, POWER ACCESSORY ABCD 1
GEARBOX
(R&R 23033876, PER 250 CEB 72–3157 OR 72–3193)
– 40 23033876 . TUBE ASSY, OIL DELIVERY, POWER ACCESSORY ABCD 1
GEARBOX (REF 250 CEB 72–3157) (SB 23063357,
CUSTOMER OPTION, PER 250 CEB 72–3212, )
40 23063357 . TUBE ASSY, OIL DELIVERY, POWER ACCESSORY ABCD 1
GEARBOX
41 23038238 . TUBE ASSY, OIL DELIVERY, POWER ACCESSORY EF 1
GEARBOX (SB 23063373, CUSTOMER OPTION,
PER 250 CEB 72–3212)
– 41 23063373 . TUBE ASSY, OIL DELIVERY, POWER ACCESSORY EF 1
GEARBOX

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 9
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
42 6840420 . SCREW, 0.190–32 X 0.500 IN. (12.7 MM) 1
(DISC., PER 250 CEB 72–3212, CUSTOMER OPTION)
–––*–––
(UIA 23063357 & 23063373)
44 6840136 . SCREEN ASSY, PRESSURE OIL 1
PER 250 CEB 72–3212)
– 44 23064638 . SCREEN ASSY, PRESSURE OIL 1
(UIA 23063373)
45 6889181 . TUBE, OIL TRANSFER 3
(SB 23008453, PER 250 CEB 72–3123)
– 45 23008453 . TUBE, OIL TRANSFER 3
47 6889185 . TUBE, OIL TRANSFER, GEARBOX RETURN ACD 1
(SB 23004230, PER 250 CEB 72–3054)
– 47 23004230 . TRANSFER TUBE & SCREEN ASSY, SCAVENGE OIL 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 9
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
72-60-00
FIGURE 9
PAGE 5
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (OIL PUMP)

FIGURE 10
72-60-00
FIGURE 10
PAGE 0
NOV 15/99
UNITS
1234567 CODE ASSY
10 GEARBOX ASSY POWER & ACCESSORY (OIL PUMP)

(REF 72–60–00, FIGS. 1, 2, 3 & 4)
– 1 6893669 . VALVE ASSY, CHECK ADE 1
(SB 6898840, PER 250 CEB 72–3002)
1 6898840 . VALVE ASSY, CHECK 1
– 2 6735927–62 . . RING, RETAINING (FRO 6898830) ADEF 1
2 6898830 . . RING, RETAINING 1
3 6824314 . . GUIDE, POPPET, CHECK VALVE (UIA 6893669) AD 2
3 6898809 . . GUIDE, POPPET, CHECK VALVE (UIA 6898840) 2
4 6886437 . . SPRING, HELICAL COMPRESSION 1
– 5 6858691 . . POPPET ASSY, CHECK VALVE (FRO 6893665) ADE 1
5 6893665 . . POPPET ASSY, CHECK VALVE 1
6 6858646 . . . SEAT, POPPET, VALVE NP
7 6824316 . . . STEM, POPPET, CHECK VALVE ADE NP
7 6893664 . . . STEM, POPPET, CHECK VALVE (UIA 6898840) NP
8 6893668 . . BODY, CHECK VALVE (UIA 6893669) ADE 1
8 6898836 . . BODY, CHECK VALVE (UIA 6898840) 1
– 11 6889199 . COUPLING, SHAFT, FLEXIBLE, FUEL CONTROL & 1
OIL PUMP (UW 23008457 PUMP ASSY)
(R&R 23030993, PER 250 CEB 72–3152)
11 23030993 . COUPLING SHAFT, FLEXIBLE, FUEL CONTROL & 1
OIL PUMP (UW 23031459 & 23039794 PUMP ASSYS)
12 FIG. REF PUMP ASSY, LUBE OIL REF
(REF 72–60–00, FIG. 11 & 12 FOR DETAILS)
NOTE: DO NOT MIX BOLTS FOR ATTACHING PUMP.
– 13 MS9169–33 . BOLT, 0.190–32 X 2.625 IN. (66.675 MM) 8

(UW AN960C10)
(SB MS9565–33, PER 250 CEB 72–3074)
13 MS9565–33 . BOLT, 0.190–32 X 2.625 IN. (66.675 MM) 8
(UW MS9321–09)
– 14 AN960C10 . WASHER, 0.190 IN. (4.826 MM) ID (UW MS9169–33) 8
(SB MS9321–09, PER 250 CEB 72–3074)
14 MS9321–09 . WASHER, 0.190 IN. (4.83 MM) ID (UW MS9565–33) 8
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 10
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
– 15 6889175 . GASKET (SB 23054601) 1

– 15 23054601 . GASKET, LUBE OIL PUMP (FRO 23053258) 1
15 23053258 . GASKET, LUBE OIL PUMP 1
17 6889173 . TUBE, OIL TRANSFER, COMPRESSOR SCAVENGE 1
19 6889185 . TUBE, OIL TRANSFER, GEARBOX, SCAVENGE OIL ABCDE 1
TO PUMP
20 23004230 . TRANSFER TUBE & SCREEN ASSY, SCAVENGE OIL F 1
– 22 6893663 . TUBE, OIL TRANSFER, OIL INLET, PRESSURE OIL 3
OUTLET, BYPASS PRESSURE
(R&R 6889176, PER 250 CEB 72–3152)
22 6889176 . TUBE, OIL TRANSFER, OIL INLET, PRESSURE OIL 3
OUTLET & BYPASS PRESSURE
(UW 23031459 & 23039794 PUMP ASSYS)
(UW 6889176 TUBE) (REF 250 CEB 72–3152)
– 23 AS3085–015 . PACKING, 0.551 IN. (13.995 MM) ID 3
(UW 6893663 TUBE) (REF 250 CEB 72–3152)
– 24 23030994 . TUBE ASSY, SCAVENGE OIL GEARBOX INTERNAL ABCDE 1
(ADDED, PER 250 CEB 72–3152)
(SB 23053291, PER 250 CEB 72–3182)
– 24 23053291 . TUBE ASSY, SCAVENGE OIL GEARBOX INTERNAL ABCDE 1
(REF 250 CEB 72–3182 & 72–3152) (FRO 23066652)
24 23066652 . TUBE ASSY, SCAVENGE OIL GEARBOX INTERNAL ABCDE 1
25 MS21043–3 . NUT, SLFLKG, 0.190–32 (REF 250 CEB 72–3152) ABCDE 1
–––*–––
26 AS3085–014 . PACKING, 0.489 IN. (12.42 MM) ID ABCDE 1
27 23004230 . TRANSFER TUBE & SCREEN ASSY, SCAVENGE OIL F 1
29 FIG. REF . HOUSING ASSY, GEARBOX, POWER & ACCESSORY REF
(REF 72–60–00, FIG. 15 OR 16 FOR DETAILS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 10
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
72-60-00
FIGURE 10
PAGE 3
SEP 1/98

FIGURE 11
72-60-00
FIGURE 11
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
11 GEARBOX ASSY POWER & ACCESSORY

(LUBE OIL PUMP ASSY)
– 1 6893654 PUMP ASSY, LUBE OIL 1
NOTE: 23008457 PUMP ASSY MAY BE REWORKED TO

23031459. REFER TO 250 CEB 72–3152 FOR
COMPLETE REWORK INSTRUCTIONS & PARTS
DISPOSITION. (REFER TO 72–60–00, FIG. 12, FOR
BREAKDOWN OF 23031459 PUMP ASSY)
– 1 23008457 PUMP ASSY, LUBE OIL 1

(R&R 23031459, PER 250 CEB 72–3152)
(REF 72–60–00, FIG. 1, 2, 3, OR 4, FOR NHA)
– 2 6893656 . BODY ASSY, PUMP, PRESSURE OIL 1
(R&R 6893656, PER 250 CEB 72–3177)
2 6893656 . BODY ASSY, PUMP, PRESSURE OIL 1
3 6810388–96 . SCREW, FLAT HD, 0.190–24 X 1.500 IN. (38.1 MM) 2
–––*–––
4 MS9486–03 . . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) 1
5 6810448 . . BUSHING, 0.665 X 0.815 X 0.440 IN. 1
(16.89 X 20.70 X 11.18 MM)
6 MS9486–01 . . PIN, 0.0625 X 0.125 IN. (1.588 X 3.18 MM) 1
7 6889172–1 . . CAGE, BEARING (42 ID X 13 MM) 1
– 7 6889172–2 . . CAGE (0.003 IN. OS) AR
– 7 6889172–3 . . CAGE (0.006 IN. OS) AR
8 6893658 . GEAR, SPUR, OIL PUMP IDLER 1
10 6893662 . GEARSHAFT ASSY, SPUR, OIL PUMP & GAS 1
PRODUCER TACHOMETER
11 6810498 . . PLUG, OIL SEAL NP
12 6889169 . BODY, SEPARATOR, PRESSURE & SCAVENGE 1
OIL PUMP
13 6889167 . COVER ASSY, PUMP, SCAVENGE OIL 1
14 MS9486–06 . . PIN, 0.625 X 0.438 IN. (15.88 X 11.13 MM) 3
15 6853446 . . SHAFT, GEAR, OIL PUMP 1
16 6844007 . . SHAFT, GEAR, OIL PUMP 2
17 6889168 . . COVER ASSY 1
18 MS9486–03 . . . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) 1
19 6735102–12 . . . BUSHING 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 11
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

– 22 6893657 . BODY ASSY, PUMP, SCAVENGE OIL 1
(R&R 23008458, PER 250 CEB 72–3123)
22 23008458 . BODY ASSY, PUMP, SCAVENGE OIL 1
23 23008454–l . . BUSHING, FLANGED, 0.546 IN. OD X 0.490 IN. ID 2
(13.87 X 12.47 MM) (REF 250 72–3123) (UIA 23008458)
– 23 23008454–2 . . BUSHING, FLANGED (0.006 IN. OS) AR
(REF 250 CEB 72–3123) (UIA 23008458)
– 23 23008454–3 . . BUSHING, FLANGED (0.0012 IN. OS) AR
(REF 250 CEB 72–3123) (UIA 23008458)
24 AN122706 . . PIN, 0.187 X 0.625 IN. (4.75 X 15.88 MM) 2
25 AN122707 . . PIN, 0.187 X 0.750 IN. (4.75 X 19.05 MM) 2
26 6810358 . GEAR, SPUR, OIL PUMP DRIVE 1
– 28 6893659 . GEAR, SPUR, OIL PUMP DRIVE 1
(R&R 6855344, PER 250 CEB 72–3152)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 11
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
72-60-00
FIGURE 11
PAGE 3
SEP 1/98

FIGURE 12
72-60-00
FIGURE 12
PAGE 0
NOV 15/99
UNITS
1234567 CODE ASSY

(LUBE OIL PUMP ASSY)
– 1 23031459 PUMP ASSY, LUBE OIL (FRO 23039794) 1
NOTE: PUMP ASSY 23031459 MAY BE REWORKED

FROM 23008457. REF TO 250 CEB 72–3152 FOR
COMPLETE REWORK INSTRUCTIONS & PARTS
DISPOSITION.
– 1 23039794 PUMP ASSY, LUBE OIL (REF 72–60–00, 1

(REF 72–60–00, FIG. 1, 2, 3 OR 4, FOR NHA)
(REF 250 CEB 72–3152)
– 2 23030987 . BODY ASSY, PUMP, PRESSURE OIL 1
(R&R 23052272) (PER 250 CEB 72–3177)
– 2 23052272 . BODY ASSY, PUMP (FRO 23052360) 1
2 23052360 . BODY ASSY, PUMP 1
3 6810388–96 . SCREW, FLAT HD, 0.190–24 X 1.500 IN. (38.1 MM) 2
–––*–––
4 MS9486–03 . . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) 1
5 6810448 . . BUSHING, 0.665 X 0.815 X 0.440 IN. 1
(16.891 X 20.701 X 11.176 MM)
6 MS9486–01 . . PIN, 0.0625 X 0.125 IN. (1.588 X 3.18 MM) 1
7 6889172–1 . . CAGE, BEARING, 42 MM ID X 13 MM 1
– 7 6889172–2 . . CAGE (0.003 IN. OS) AR
– 7 6889172–3 . . CAGE (0.006 IN. OS) AR
10 23030990 . GEARSHAFT ASSY, SPUR, OIL PUMP & GAS 1
PRODUCER TACHOMETER
11 6810498 . . PLUG, OIL SEAL NP
12 23030986 . BODY, SEPARATOR, PRESSURE & SCAVENGE 1
OIL PUMP
13 23030991 . COVER ASSY, PUMP, SCAVENGE OIL 1
14 MS9486–06 . . PIN, 0.625 X 0.438 IN. (15.88 X 11.13 MM) 3
15 6870927 . . SHAFT, GEAR, OIL PUMP, 0.435 X 1.380 IN. 1
(11.049 X 35.052 MM)
(11.049 X 18.542 MM)
(11.049 X 59.182 MM)
18 6889168 . . COVER ASSY 1
19 MS9486–03 . . . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 12
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
20 6735102–12 . . . BUSHING, 0.397 IN. ID X 0.565 IN. OD 1

(10.08 X 14.35 MM)
– 23 23031461 . BODY ASSY, PUMP, SCAVENGE OIL (FRO 23039793) 1
23 23039793 . BODY ASSY, PUMP SCAVENGE OIL 1
(REF 250 CEB 72–3152)
24 23008454–1 . . BUSHING, FLANGED, 0.546 IN. OD X 2
0.490 IN. ID (13.87 MM OD X 12.47 MM ID)
– 24 23008454–2 . . BUSHING, FLANGED (0.006 IN. 0S) AR
– 24 23008454–3 . . BUSHING, FLANGED (0.0012 IN. 0S) AR
25 AN122706 . . PIN, 0.187 X 0.625 IN. (4.75 X 15.88 MM) 2
26 AN122707 . . PIN, 0.187 X 0.750 IN. (4.75 X 19.05 MM) 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 12
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
72-60-00
FIGURE 12
PAGE 3
SEP 1/98
GEARBOX, POWER & ACCESSORY ( COVER ASSY) (250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 13
PAGE 0
SEP 1/98
GEARBOX, POWER & ACCESSORY (COVER ASSY) (250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 13
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
13 GEARBOX, POWER & ACCESSORY (COVER ASSY)

(250–C30, –C30S, –C30P, –C30M, –C30G)
R – 1 6895079 COVER ASSY, GEARBOX, POWER & ACCESSORY AD 1

(REF 250 CEB 72–3006, 72–3016)
(R&R 23001930, PER 250 CEB 72–3017)
R – 1 23001930 COVER ASSY, GEARBOX, POWER & ACCESSORY AD 1
(REF 250 CEB CEB 72–3069)
(R&R 23004220, PER 250 CEB 72–3043)
– 1 23004220 COVER ASSY, GEARBOX, POWER & ACCESSORY ABD 1
(REF 250 CEB 72–3069 & 72–3077)
(R&R 23033434, PER 250 CEB 72–3145)
(R&R 23008456, PER 250 CEB 72–3123)
(SB 23033434)
(R&R 23033437, PER 250 CEB 72–3123)
– 1 23033437 COVER ASSY, GEARBOX, POWER & ACCESSORY ABDE 1
(R&R 23053323, PER 250 CEB 72–3182
OR CEB 72–3206)
– 1 23053323 COVER ASSY, GEARBOX, POWER & ACCESSORY ABDE 1
(FRO 23053324 ON 250–C30G ENGINES ONLY)
(R&R 23059576, PER 250 CEB 72–3193)
(R&R 23064606, PER 250 CEB 72–3212,
CUSTOMER OPTION)
1 23064606 COVER ASSY, GEARBOX, POWER & ACCESSORY ABD 1
(REF 72–60–00, FIG. 1, 2 & 3, FOR NHA)
– 1 23005296 COVER ASSY, GEARBOX, POWER & ACCESSORY C 1
(R&R 23033435, PER 250 CEB 72–3145)
(R&R 23031405, PER 250 CEB 72–3123)
(SB 23033435)
(R&R 23033438, PER 250 CEB 72–3123)
(R&R 23053324, PER 250 CEB 72–3182
OR CEB 72–3206)
– 1 23053324 COVER ASSY, GEARBOX, POWER & ACCESSORY CE 1
(R&R 23059577, PER 250 CEB 72–3193)
(R&R 23064607, PER 250 CEB 72–3212,
CUSTOMER OPTION)
(REF 72–60–00, FIG. 2 & 3 FOR NHA)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 13
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
2 23008454–1 . BUSHING, FLANGED, 0.546 IN. OD X 0.490 IN. ID 3

(13.87 MM OD X 12.47 MM ID) (REF 250 CEB 72–3123)
– 2 23008454–2 . BUSHING, FLANGED (0.006 IN. OS) AR
(REF 250–CEB 72–3123)
– 2 23008454–3 . BUSHING, FLANGED (0.0012 IN. OS) AR
(REF 250–CEB 72–3123)
3 AN150532 . STUD, 0.250–20 X 0.190–32 X 1.000 IN. (25.40 MM) 2
– 3 AN150533 . STUD (0.003 IN. OS) AR
– 3 AN150534 . STUD (0.006 IN. OS) AR
– 3 AN150535 . STUD (0.009 IN. OS) AR
– 3 AN150536 . STUD (0.012 IN. OS) AR
4 AN150832 . STUD, 0.3125–18 X 0.250–28 X 1.156 IN. (29.36 MM) 3
– 4 AN150833 . STUD (0.003 IN. OS) AR
– 4 AN150834 . STUD (0.006 IN. OS) AR
– 4 AN150835 . STUD (0.009 IN. OS) AR
– 4 AN150836 . STUD (0.012 IN. OS) AR
5 AN150862 . STUD, 0.313–18 X 0.250–28 X 1.469 IN. (37.31 MM) 6
– 5 AN150863 . STUD (0.003 IN. OS) AR
– 5 AN150864 . STUD (0.006 IN. OS) AR
– 5 AN150865 . STUD (0.009 IN. OS) AR
– 5 AN150866 . STUD (0.012 IN. OS) AR
R – 6 MS17295–031 . STUD, 0.375–16 X 0.313–24 X 1.438 IN. (36.53 MM) 8
(FRO MS17295–036)
R – 6 MS17295–032 . STUD (0.003 IN. OS) AR
R – 6 MS17295–033 . STUD (0.006 IN. OS) AR
R 6 MS17295–036 . STUD, 0.375–16 X 0.3125–24 X 1.500 IN. (38.10 MM) 8
R – 6 MS17295–037 . STUD (0.003 IN. OS) AR
R – 6 MS17295–038 . STUD (0.006 IN. OS) AR
7 AN150850 . STUD, 0.313–18 X 0.250–28 X 1.344 IN. (34.14 MM) 3
– 7 AN150851 . STUD (0.003 IN. OS) AR
– 7 AN150852 . STUD (0.006 IN. OS) AR
– 7 AN150853 . STUD (0.009 IN. OS) AR
– 7 AN150854 . STUD (0.012 IN. OS) AR
8 6841729–021 . STUD, STEPPED, 0.375–16 X 0.3125–24 X 1.500 IN. AD 6
(38.1 MM) (UIA 6895079)
(SB 23001928–1 FOR 5 & SB 23001929–1
FOR 1, PER 25O CEB 72–3017)
– 8 6841729–022 . STUD (0.003 IN. OS) AR
– 8 6841729–023 . STUD (0.006 IN. OS) AR
– 8 6841729–024 . STUD (0.009 IN. OS) AR
– 8 6841729–025 . STUD (0.012 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 13
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
9 23001928–0 . STUD, SHOULDERED, STEPPED, 0.5000–13 5

X 0.3125–24 X 1.564 (39.73 MM) IN. (0.003 IN. US.)
(UIA 23001930, 23004220 & 23005296)
– 9 23001928–1 . STUD, SHOULDERED, STEPPED, 0.5000–13 AR
X 0.3125–24 X 1.564 (39.73 MM) IN.
– 9 23001928–2 . STUD (0.003 IN. OS) AR
– 9 23001928–3 . STUD (0.006 IN. OS) AR
– 9 23001928–4 . STUD (0.009 IN. OS) AR
– 9 23001928–5 . STUD (0.012 IN. OS) AR
10 23001929–1 . STUD, SHOULDERED, STEPPED,0.3750–16 X 1
0.3125–24 X 1.564 (39.73 MM) IN.
(UIA 23001930 & 23004220)
–10 23001929–2 . STUD (0.003 IN. OS) AR
– 10 23001929–3 . STUD (0.006 IN. OS) AR
– 10 23001929–4 . STUD (0.009 IN. OS) AR
– 10 23001929–5 . STUD (0.012 IN. OS) AR
11 AN150520 . STUD, 0.250–20 X 0.190–32 X 0.875 IN. 7
(22.225 MM) (REF 250 CEB 72–3073 & 72–3152)
– 11 AN150521 . STUD (0.003 IN. OS) AR
– 11 AN150522 . STUD (0.006 IN. OS) AR
– 11 AN150523 . STUD (0.009 IN. OS) AR
– 11 AN150524 . STUD (0.012 IN. OS) AR
12 AN154720 . STUD, 0.250–20 X 0.190–32 X 1.000 IN. 6
(25.40 MM) (REF CEB 72–3073)
– 12 AN154719 . STUD (0.003 IN. US) AR
– 12 AN154721 . STUD (0.003 IN. OS) AR
– 12 AN154722 . STUD (0.006 IN. OS) AR
– 12 AN154723 . STUD (0.009 IN. OS) AR
– 12 AN154724 . STUD (0.012 IN. OS) AR
13 AN150826 . STUD, 0.313–18 X 0.250–28 X 1.094 IN. (27.79 MM) 1
– 13 AN150827 . STUD (0.003 IN. OS) AR
– 13 AN150828 . STUD (0.006 IN. OS) AR
– 13 AN150829 . STUD (0.009 IN. OS) AR
– 13 AN150830 . STUD (0.012 IN. OS) AR
14 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.18 MM) 6
– 14 AN150551 . STUD (0.003 IN. OS) AR
– 14 AN150552 . STUD (0.006 IN. OS) AR
– 14 AN150553 . STUD (0.009 IN. OS) AR
– 14 AN150554 . STUD (0.012 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 13
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
15 AN150556 . STUD, 0.250–20 X 0.190–32 X 1.250 IN. (31.75 MM) 1

– 15 AN150557 . STUD (0.003 IN. OS) AR
– 15 AN150558 . STUD (0.006 IN. OS) AR
– 15 AN150559 . STUD (0.009 IN. OS) AR
– 15 AN150560 . STUD (0.012 IN. OS) AR
16 AN150574 . STUD, 0.250–20 X 0.190–32 X 1.438 IN. (36.53 MM) 4
– 16 AN150575 . STUD (0.003 IN. OS) AR
– 16 AN150576 . STUD (0.006 IN. OS) AR
– 16 AN150577 . STUD (0.009 IN. OS) AR
– 16 AN150578 . STUD (0.012 IN. OS) AR
17 MS9486–26 . PIN, 0.0938 X 0.250 IN. (2.383 X 6.35 MM) ABD 2
18 6825546–1 . INSERT, SCREW, FLANGED, 0.500–20 X 0.688–16 ABD 1
(UW 6871534 PLUG) (SB 6896483–1, –2, OR –3,
PER 250 CEB 72–3083, REF 72–60–00, FIG. 1 & 2)
– 18 6825546–2 . INSERT (0.003 IN. OS) ABD AR
19 23005291–1 . ADAPTOR, QUICK DISCONNECT, MAGNETIC PLUG, CE 1
0.6875–16NS (UW 23005287 PLUG)
– 19 23005291–2 . ADAPTOR, QUICK DISCONNECT (0.003 IN. OS) CE AR
– 21 6895806–1 . CAGE, BEARING, STEPPED PINION, 90 MM ID 1
(R&R 23004221–1, PER 250 CEB 72–3043)
– 21 6895806–2 . CAGE (0.003 IN. OS) AR
(R&R 23004221–2, PER 250 CEB 72–3043)
– 21 6895806–3 . CAGE (0.006 IN. OS) AR
(R&R 23004221–3, PER 250 CEB 72–3043)
(R&R 23059568–1, PER 250 CEB 72–3193)
– 21 23004221–2 . CAGE (0.003 IN. OS) AR
(R&R 23059568–2, PER 250 CEB 72–3193)
– 21 23004221–3 . CAGE (0.006 IN. OS) AR
(R&R 23059568–3, PER 250 CEB 72–3193)
(SB 23059568–1, PER 250 CEB 72–3193)
– 21 23031268–2 . CAGE (0.003 IN. OS) AR
(SB 23059568–2, PER 250 CEB 72–3193)
– 21 23031268–3 . CAGE (0.006 IN. OS) AR
(SB 23059568–3, PER 250 CEB 72–3193)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 13
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
UNITS
1234567 CODE ASSY
21 23059568–1 . CAGE, BEARING, STEPPED PINION, 90 MM ID 1

(REF 250 CEB A–72–3217)
– 21 23059568–2 . CAGE (0.003 IN. OS) AR
– 21 23059568–3 . CAGE (0.006 IN. OS) AR
23 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.59 X 3.18 MM) 3
24 6889314–1 . CAGE, BEARING, GEAR TRAIN COMPOUND IDLER, 3
GENERATOR IDLER SHAFT & SPARE)
– 24 6889314–2 . CAGE (0.003 IN. OS) AR
– 24 6889314–3 . CAGE (0.006 IN. OS) AR
25 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.588 X 3.175 MM) 2
26 6889172–1 . CAGE, BEARING (42 MM ID X 13 MM) 2
(26 & 77 TOOTH IDLER SHAFTS)
– 26 6889172–2 . CAGE (0.003 IN. OS) AR
– 26 6889172–3 . CAGE (0.006 IN. OS) AR
27 MS9486–49 . PIN, 0.125 X 0.250 IN. (3.175 X 6.35 MM) 1
28 6889316–1 . CAGE, BEARING (62 MM ID X 17 MM) FUEL PUMP 1
– 28 6889316–2 . CAGE (0.003 IN. OS) AR
– 28 6889316–3 . CAGE (0.006 IN. OS) AR
29 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.588 X 3.175 MM) 4
30 6843358–1 . CAGE, BEARING (42 MM ID X 9 MM) STARTER, 4
GENERATOR, GOVERNOR, FUEL PUMP, SPARE
– 30 6843358–2 . CAGE (0.003 IN. OS) AR
– 30 6843358–3 . CAGE (0.006 IN. OS) AR
– 30 6843358–4 . CAGE (0.012 IN. OS) AR
– 30 6843358–5 . CAGE (0.018 IN. OS) AR
31 MS9486–49 . PIN, 0.125 X 0.250 IN. (3.175 X 6.35 MM) 1
32 6889182–1 . CAGE, BEARING, 85 MM ID X 19 MM 1
(POWER TAKEOFF)
– 32 6889182–2 . CAGE (0.003 IN. OS) AR
– 32 6889182–3 . CAGE (0.006 IN. OS) AR
33 MS124659 . INSERT, HELICAL COIL, 0.438–20 1
R 34 MS124660 . INSERT, HELICAL COIL, 0.500–20 2
(ADDED, PER 250 CEB 72-3033)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 13
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
72-60-00
FIGURE 13
PAGE 7
SEP 1/98
GEARBOX, POWER & ACCESSORY (COVER ASSY) (250–C30G/2)

72-60-00
FIGURE 14
PAGE 0
SEP 1/98
GEARBOX, POWER & ACCESSORY (COVER ASSY) (250–C30G/2)

72-60-00
FIGURE 14
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
14 GEARBOX, POWER & ACCESSORY (COVER ASSY)

(250–C30G/2)
– 1 23053966 COVER ASSY, GEARBOX, POWER & ACCESSORY F 1

(FRO 23057753)
(R&R 23059578, PER 250 CEB 72–3193)
(R&R 23064608, PER 250 CEB 72–3212,
CUSTOMER OPTION)
1 23064608 COVER ASSY, GEARBOX, POWER & ACCESSORY F 1
(REF 72–60–00, FIG. 4, FOR NHA)
2 23008454–1 . BUSHING, FLANGED, 0.546 IN. OD X 0.490 IN. ID F 3
(13.87 MM OD X 12.47 MM ID) (REF 250 CEB 72–3123)
– 2 23008454–2 . BUSHING, FLANGED (0.006 IN. OS) F AR
(REF 250–CEB 72–3123)
– 2 23008454–3 . BUSHING, FLANGED (0.0012 IN. OS) F AR
(REF 250–CEB 72–3123)
3 AN150532 . STUD, 0.250–20 X 0.190–32 X 1.000 IN. (25.40 MM) F 2
– 3 AN150533 . STUD (0.003 IN. OS) F AR
– 3 AN150534 . STUD (0.006 IN. OS) F AR
– 3 AN150535 . STUD (0.009 IN. OS) F AR
– 3 AN150536 . STUD (0.012 IN. OS) F AR
4 AN150832 . STUD, 0.3125–18 X 0.250–28 X 1.156 IN. (29.36 MM) F 3
– 4 AN150833 . STUD (0.003 IN. OS) F AR
– 4 AN150834 . STUD (0.006 IN. OS) F AR
– 4 AN150835 . STUD (0.009 IN. OS) F AR
– 4 AN150836 . STUD (0.012 IN. OS) F AR
R – 5 MS17295–031 . STUD, 0.375–16 X 0.313–24 X 1.438 IN. (36.53 MM) F 8
(FRO MS17295–036)
R – 5 MS17295–032 . STUD (0.003 IN. OS) F AR
R – 5 MS17295–033 . STUD (0.006 IN. OS) F AR
R 5 MS17295–036 . STUD, 0.375–16 X 0.3125–24 X 1.500 IN. (38.10 MM) F 8
R – 5 MS17295–037 . STUD (0.003 IN. OS) F AR
R – 5 MS17295–038 . STUD (0.006 IN. OS) F AR
6 AN150850 . STUD, 0.313–18 X 0.250–28 X 1.344 IN. (34.14 MM) F 3
– 6 AN150851 . STUD (0.003 IN. OS) F AR
– 6 AN150852 . STUD (0.006 IN. OS) F AR
– 6 AN150853 . STUD (0.009 IN. OS) F AR
– 6 AN150854 . STUD (0.012 IN. OS) F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 14
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
7 23001928–0 . STUD, SHOULDERED, STEPPED, 0.5000–13 F 5

X 0.3125–24 X 1.564 (39.73 MM) IN.
(UIA 23001930, 23004220 & 23005296)
– 7 23001928–1 . STUD, SHOULDERED, STEPPED, 0.5000–13 F AR
X 0.3125–24 X 1.564 (39.73 MM) IN.
– 7 23001928–2 . STUD (0.003 IN. OS) F AR
– 7 23001928–3 . STUD (0.006 IN. OS) F AR
– 7 23001928–4 . STUD (0.009 IN. OS) F AR
– 7 23001928–5 . STUD (0.012 IN. OS) F AR
8 23001929–1 . STUD, SHOULDERED, STEPPED,0.3750–16 X F 1
0.3125–24 X 1.564 IN.(39.73 MM)
– 8 23001929–2 . STUD (0.003 IN. OS) F AR
– 8 23001929–3 . STUD (0.006 IN. OS) F AR
– 8 23001929–4 . STUD (0.009 IN. OS) F AR
– 8 23001929–5 . STUD (0.012 IN. OS) F AR
9 AN150520 . STUD, 0.250–20 X 0.190–32 X 0.875 IN.(22.225 MM) F 6
(REF 250 CEB 72–3073 & 72–3152)
– 9 AN150521 . STUD (0.003 IN. OS) F AR
– 9 AN150522 . STUD (0.006 IN. OS) F AR
– 9 AN150523 . STUD (0.009 IN. OS) F AR
– 9 AN150524 . STUD (0.012 IN. OS) F AR
10 AN154720 . STUD, 0.250–20 X 0.190–32 X 1.000 IN. (25.40 MM) F 6
(REF CEB 72–3073)
– 10 AN154719 . STUD (0.003 IN. OS) F AR
– 10 AN154721 . STUD (0.003 IN. OS) F AR
– 10 AN154722 . STUD (0.006 IN. OS) F AR
– 10 AN154723 . STUD (0.009 IN. OS) F AR
– 10 AN154724 . STUD (0.012 IN. OS) F AR
11 AN150826 . STUD, 0.313–18 X 0.250–28 X 1.094 IN. (27.79 MM) F 7
– 11 AN150827 . STUD (0.003 IN. OS) F AR
– 11 AN150828 . STUD (0.006 IN. OS) F AR
– 11 AN150829 . STUD (0.009 IN. OS) F AR
– 11 AN150830 . STUD (0.012 IN. OS) F AR
12 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.18 MM) F 6
– 12 AN150551 . STUD (0.003 IN. OS) F AR
– 12 AN150552 . STUD (0.006 IN. OS) F AR
– 12 AN150553 . STUD (0.009 IN. OS) F AR
– 12 AN150554 . STUD (0.012 IN. OS) F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 14
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
13 AN150556 . STUD, 0.250–20 X 0.190–32 X 1.250 IN. (31.75 MM) F 1

– 13 AN150557 . STUD (0.003 IN. OS) F AR
– 13 AN150558 . STUD (0.006 IN. OS) F AR
– 13 AN150559 . STUD (0.009 IN. OS) F AR
– 13 AN150560 . STUD (0.012 IN. OS) F AR
14 AN150574 . STUD, 0.250–20 X 0.190–32 X 1.438 IN. (36.53 MM) F 4
– 14 AN150575 . STUD (0.003 IN. OS) F AR
– 14 AN150576 . STUD (0.006 IN. OS) F AR
– 14 AN150577 . STUD (0.009 IN. OS) F AR
– 14 AN150578 . STUD (0.012 IN. OS) F AR
15 23005291–1 . ADAPTOR, QUICK DISCONNECT, MAGNETIC PLUG, F 1
0.6875–16 (UW 23005287 PLUG)
– 15 23005291–2 . ADAPTOR, QUICK DISCONNECT (0.003 IN. OS) F AR
– 17 23031268–1 . CAGE, BEARING, STEPPED PINION, 90 MM ID F 1
(SB 23059568–1, PER 250 CEB 72–3193)
– 17 23031268–2 . CAGE (0.003 IN. OS) F AR
(SB 23059568–2, PER 250 CEB 72–3193)
– 17 23031268–3 . CAGE (0.006 IN. OS) F AR
(SB 23059568–3, PER 250 CEB 72–3193)
R 17 23059568–1 . CAGE, BEARING, STEPPED PINION, 90 MM ID F 1
(REF 250 CEB A–72–3217)
– 17 23059568–2 . CAGE (0.003 IN. OS) F AR
– 17 23059568–3 . CAGE (0.006 IN. OS) F AR
19 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.59 X 3.18 MM) F 3
20 6889314–1 . CAGE, BEARING, GEAR TRAIN COMPOUND IDLER, F 3
GENERATOR IDLER SHAFT & SPARE
– 20 6889314–2 . CAGE (0.003 IN. OS) F AR
– 20 6889314–3 . CAGE (0.006 IN. OS) F AR
21 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.588 X 3.175 MM) F 2
22 6889172–1 . CAGE, BEARING (42 ID X 13 MM) F 2
(26 & 77 TOOTH IDLER SHAFTS)
– 22 6889172–2 . CAGE (0.003 IN. OS) F AR
– 22 6889172–3 . CAGE (0.006 IN. OS) F AR
23 MS9486–49 . PIN, 0.125 X 0.250 IN. (3.175 X 6.35 MM) F 1
24 6889316–1 . CAGE, BEARING (62 ID X 17 MM) (FUEL PUMP) F 1
– 24 6889316–2 . CAGE (0.003 IN. OS) F AR
– 24 6889316–3 . CAGE (0.006 IN. OS) F AR
25 MS9486–01 . PIN, 0.0625 X 0.125 IN. (1.588 X 3.175 MM) F 4

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 14
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
26 6843358–1 . CAGE, BEARING (42 ID X 9 MM) STARTER, F 4

GENERATOR, GOVERNOR, FUEL PUMP, SPARE
– 26 6843358–2 . CAGE (0.003 IN. OS) F AR
– 26 6843358–3 . CAGE (0.006 IN. OS) F AR
– 26 6843358–4 . CAGE (0.012 IN. OS) F AR
– 26 6843358–5 . CAGE (0.018 IN. OS) F AR
27 MS9486–50 . PIN, 0.125 X 0.312 IN. (3.175 X 7.92 MM) F 1
28 23053982–1 . CAGE, BEARING (80 ID X 23 MM) F 1
(POWER TAKEOFF)
– 28 23053982–2 . CAGE (0.003 IN. OS) F AR
– 28 23053982–3 . CAGE (0.006 IN. OS) F AR
29 230124659 . INSERT, HELICAL COIL, 0.438–20 F 1
30 230124660 . INSERT, HELICAL COIL, 0.500–20 F 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 14
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98

(HOUSING ASSY) (250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 15
PAGE 0
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (HOUSING ASSY)

(250–C30, –C30S, –C30P, –C30M, –C30G)
72-60-00
FIGURE 15
PAGE 1
NOV 15/99
UNITS
1234567 CODE ASSY

(HOUSING ASSY)
(250–C30, –C30S, –C30P, –C30M, –C30G)
R – 1 6896094 HOUSING, ASSY, GEARBOX, POWER & ACCESSORY ABD 1

(R&R 23008022, PER 250 CEB 72–3121)
– 1 23005297 HOUSING, ASSY, GEARBOX, POWER & ACCESSORY C 1
(R&R 23031296, PER 250 CEB 72–3121)
– 1 23008022 HOUSING ASSY, GEARBOX, POWER & ACCESSORY ABD 1
(R&R 23031403, PER 250 CEB 72–3123)
(R&R 23035139, PER 250 CEB 72–3152)
– 1 23053963 HOUSING ASSY, GEARBOX, POWER & ACCESSORY 1
(FRO 23035140)
(REF 72–60–00, FIG. 1 OR 2, FOR NHA)
(FRO 23035140 FOR 250–C30G ENGINES ONLY)
(R&R 23064603, PER 250 CEB 72–3212,
CUSTOMER OPTION)
1 23064603 HOUSING ASSY, GEARBOX, POWER & ACCESSORY ABD 1
(REF 72–60–00, FIG. 1, OR 2 FOR NHA)
– 1 23031296 HOUSING ASSY, GEARBOX, POWER & ACCESSORY C 1
(R&R 23031404, PER 250 CEB 72–3123)
– 1 23031404 HOUSING ASSY, GEARBOX, POWER & ACCESSORY C 1
(R&R 23035140, PER 250 CEB 72–3152)
– 1 23035140 HOUSING ASSY, GEARBOX, POWER & ACCESSORY CE 1
(R&R 23064604, PER 250 CEB 72–3212,
CUSTOMER OPTION)
– 1 23064604 HOUSING ASSY, GEARBOX, POWER & ACCESSORY CE 1
(REF 72–60–00, FIG. 1 & 3, FOR NHA)
2 23008454–1 . BUSHING, FLANGED, 0.546 IN. OD X 0.490 IN. ID 1
(13.87 X 12.47 MM) (ADDED, PER 250 CEB 72–3123)
– 2 23008454–2 . BUSHING, FLANGED (0.006 IN. 0S) AR
– 2 23008454–3 . BUSHING, FLANGED (0.012 IN. 0S) AR
3 AN150832 . STUD, 0.313–18 X 0.250–28 X 1.156 IN. (29.36 MM) 14
– 3 AN150833 . STUD (0.003 IN. OS) AR
– 3 AN150834 . STUD (0.006 IN. OS) AR
– 3 AN150835 . STUD (0.009 IN. OS) AR
– 3 AN150836 . STUD (0.012 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 15
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
4 AN150520 . STUD, 0.250–20 X 0.190–32 X 0.875 IN. (22.225 MM) 10

– 4 AN150521 . STUD (0.003 IN. OS) AR
– 4 AN150522 . STUD (0.006 IN. OS) AR
– 4 AN150523 . STUD (0.009 IN. OS) AR
– 4 AN150524 . STUD (0.012 IN. OS) AR
5 MS9486–26 . PIN, 0.0938 X 0.250 IN. (2.383 X 6.35 MM) ABD 2
6 6825546–1 . INSERT, SCREW, FLANGED, 0.500–20 X 0.688–16 ABD 1
(UW 6871534 PLUG)
7 23005291–1 . ADAPTOR, QUICK DISCONNECT, MAGNETIC PLUG, CE 1
0.6875–16NS (UW 23005287 PLUG)
9 AN150826 . STUD, 0.3125–18 X 0.250–28 X 1.094 IN. (27.788 MM) 6
(SB 6876030–1, PER 250 CEB 72–3126)
– 9 AN150827 . STUD (0.003 IN. OS) AR
(SB 6876030–2, PER 250 CEB 72–3126)
– 9 AN150828 . STUD (0.006 IN. OS) AR
(SB 6876030–3, PER 250 CEB 72–3126)
– 9 AN150829 . STUD (0.009 IN. OS) AR
(SB 6876030–4, PER 250 CEB 72–3126)
– 9 AN150830 . STUD (0.012 IN. OS) AR
(SB 6876030–5, PER 250 CEB 72–3126)
– 9 6876030–1 . STUD, STEPPED, 0.250–28 X 0.500–16 X 1.374 IN. 6
(34.9 MM)
– 9 6876030–2 . STUD (0.003 IN. OS) AR
– 9 6876030–3 . STUD (0.006 IN. OS) AR
– 9 6876030–4 . STUD (0.009 IN. OS) AR
– 9 6876030–5 . STUD (0.012 IN. OS) AR
10 MS9486–03 . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) 1
11 6840421–1 . INSERT, 0.190–32 X 0.313–24 X 0.365 IN. (9.271 MM) 1
– 11 6840421–2 . INSERT (0.003 IN. OS) AR
– 11 6840421–3 . INSERT (0.006 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 15
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
12 AN150538 . STUD, 0.250–20 X 0.190–32 X 1.062 IN. (26.99 MM) 3

– 12 AN150539 . STUD (0.003 IN. OS) AR
– 12 AN150540 . STUD (0.006 IN. OS) AR
– 12 AN150541 . STUD (0.009 IN. OS) AR
– 12 AN150542 . STUD (0.012 IN. OS) AR
13 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.175 MM) 2
– 13 AN150551 . STUD (0.003 IN. OS) AR
– 13 AN150552 . STUD (0.006 IN. OS) AR
– 13 AN150553 . STUD (0.009 IN. OS) AR
– 13 AN150554 . STUD (0.012 IN. OS) AR
14 AN150574 . STUD, 0.250–20 X 0.190–32 X 1.438 IN. (36.525 MM) 1
– 14 AN150575 . STUD (0.003 IN. OS) AR
– 14 AN150576 . STUD (0.006 IN. OS) AR
– 14 AN150577 . STUD (0.009 IN. OS) AR
– 14 AN150578 . STUD (0.012 IN. OS) AR
15 AN150592 . STUD, 0.250–20 X 0.190–32 X 1.625 (41.275 MM). 2
– 15 AN150593 . STUD (0.003 IN. OS) AR
– 15 AN150594 . STUD (0.006 IN. OS) AR
– 15 AN150595 . STUD (0.009 IN. OS) AR
– 15 AN150596 . STUD (0.012 IN. OS) AR
16 AN122704 . PIN, 0.187 X 0.375 IN. (4.75 X 9.525 MM) 2
17 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.175 MM) 23
– 17 AN150551 . STUD (0.003 IN. OS) AR
– 17 AN150552 . STUD (0.006 IN. OS) AR
– 17 AN150553 . STUD (0.009 IN. OS) AR
– 17 AN150554 . STUD (0.012 IN. OS) AR
18 AN150958 . STUD, 0.313–18 X 0.250–28 X 2.719 IN. (69.063 MM) 5
– 18 AN150959 . STUD (0.003 IN. OS) AR
– 18 AN150960 . STUD (0.006 IN. OS) AR
– 18 AN150961 . STUD (0.009 IN. OS) AR
– 18 AN150962 . STUD (0.012 IN. OS) AR
19 AN150940 . STUD, 0.313–18 X 0.250–28 X 2.344 IN. (59.538 MM) 6
– 19 AN150941 . STUD (0.003 IN. OS) AR
– 19 AN150942 . STUD (0.006 IN. OS) AR
– 19 AN150943 . STUD (0.009 IN. OS) AR
– 19 AN150944 . STUD (0.012 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 15
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
20 AN122717 . PIN, 0.250 X 0.500 IN. (6.35 X 12.7 MM) 2

21 AN150850 . STUD, 0.313–18 X 0.250–28 X 1.344 IN. (34.138 MM) 6
– 21 AN150851 . STUD (0.003 IN. OS) AR
– 21 AN150852 . STUD (0.006 IN. OS) AR
– 21 AN150853 . STUD (0.009 IN. OS) AR
– 21 AN150854 . STUD (0.012 IN. OS) AR
22 NAS1394–3 . INSERT, 0.190–32 X 0.313–18 X 0.310 IN. (7.874 MM) 9
23 MS9486–02 . PIN, 0.063 X 0.188 IN. (1.588 X 4.775 MM) 2
24 MS9016–10 . BUSHING, 0.190–32 2
25 MS9486–25 . PIN, 0.0938 X 0.188 IN. (2.383 X 4.775 MM) 12
26 MS9016–19 . BUSHING, 0.375–24 12
27 MS9047–065 . PIN, 0.094 X 0.250 IN. (2.388 X 6.35 MM) 1
28 MS9486–01 . PIN, 0.063 X 0.125 IN. (1.588 X 3.175 MM) 7
– 29 6843356–2 . CAGE (0.003 IN. OS) AR
– 29 6843356–3 . CAGE (0.006 IN. OS) AR
– 29 6843356–4 . CAGE (0.012 IN. OS) AR
– 29 6843356–5 . CAGE (0.018 IN. OS) AR
(CENTRIFUGAL BREATHER)
– 30 6843358–2 . CAGE (0.003 IN. OS) AR
– 30 6843358–3 . CAGE (0.006 IN. OS) AR
– 30 6843358–4 . CAGE (0.012 IN. OS) AR
– 30 6843358–5 . CAGE (0.018 IN. OS) AR
31 6892287–1 . CAGE, BEARING, 1.654 ID X 0.467 IN. 1
(42.012 X 11.862 MM) (STARTER GENERATOR)
– 31 6892287–2 . CAGE (0.003 IN. OS) AR
– 31 6892287–3 . CAGE (0.006 IN. OS) AR
32 MS9486–49 . PIN, 0.125 X 0.250 IN. (3.175 X 6.35 MM) 1
33 6889315–1 . CAGE, BEARING (80 MM ID X 18 MM) 1
POWER TAKEOFF
– 33 6889315–2 . CAGE (0.003 IN. OS) AR
– 33 6889315–3 . CAGE (0.006 IN. OS) AR
34 6840372–12 . PIN, PLUG, ALUMINUM 2
35 6840372–7 . PIN, PLUG, ALUMINUM 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 15
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
UNITS
1234567 CODE ASSY
36 NAS1394–3L . INSERT, 0.190–32 X 0.313–24 X 0.310 IN. (7.874 MM) 9

– 37 MS17295–031 . STUD, 0.375–16 X 0.313–24 X 1.438 IN. (36.53 MM) 4
(FRO MS17295–036)
– 37 MS17295–032 . STUD (0.003 IN. OS) AR
– 37 MS17295–033 . STUD (0.006 IN. OS) AR
– 37 MS17295–034 . STUD (0.009 IN. OS) AR
– 37 MS17295–035 . STUD (0.012 IN. OS) AR
37 MS17295–036 . STUD, 0.375–16 X 0.3125–24 X 1.500 IN. (38.10 MM) 4
– 37 MS17295–037 . STUD (0.003 IN. OS) AR
– 37 MS17295–038 . STUD (0.006 IN. OS) AR
R 40 MS124660 . INSERT, HELICAL COIL, 0.500–20 1
(ADDED, PER 250 CEB 72-3033)
41 23008008–1 . BUSHING 1.047 OD X 0.947 ID (27 X 24 MM) 1
(STANDARD OD) (REF 250 CEB 72–3089)
– 41 23008008–2 . BUSHING (0.0006 IN. OS) AR
(FOR OIL CHECK VALVE BORE)
– 41 23008008–3 . BUSHING (0.0012 IN. OS) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 15
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
72-60-00
FIGURE 15
PAGE 7
DEC 15/01
GEARBOX ASSY, POWER & ACCESSORY (HOUSING ASSY) (250–C30G/2)

72-60-00
FIGURE 16
PAGE 0
SEP 1/98
GEARBOX ASSY, POWER & ACCESSORY (HOUSING ASSY) (250–C30G/2)

72-60-00
FIGURE 16
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

(HOUSING ASSY) (250–C30G/2)
1 23053980 HOUSING ASSY, GEARBOX, POWER & ACCESSORY F 1

(R&R 23064605, PER 250 CEB 72–3212,
CUSTOMER OPTION) (REF 72–60–00, FIG. 4 FOR NHA)
– 1 23064605 HOUSING ASSY, GEARBOX, POWER & ACCESSORY F 1
2 23008454–1 . BUSHING, FLANGED, 0.546 IN. OD X 0.490 IN. ID F 1
(13.87 X 12.47 MM)
– 2 23008454–2 . BUSHING, FLANGED (0.006 IN. 0S) F AR
– 2 23008454–3 . BUSHING, FLANGED (0.0012 IN. 0S) F AR
3 AN150832 . STUD, 0.313–18 X 0.250–28 X 1.156 IN. (29.36 MM) F 8
– 3 AN150833 . STUD (0.003 IN. OS) F AR
– 3 AN150834 . STUD (0.006 IN. OS) F AR
– 3 AN150835 . STUD (0.009 IN. OS) F AR
– 3 AN150836 . STUD (0.012 IN. OS) F AR
4 AN150520 . STUD, 0.250–20 X 0.190–32 X 0.875 IN. (22.225 MM) F 10
– 4 AN150521 . STUD (0.003 IN. OS) F AR
– 4 AN150522 . STUD (0.006 IN. OS) F AR
– 4 AN150523 . STUD (0.009 IN. OS) F AR
– 4 AN150524 . STUD (0.012 IN. OS) F AR
5 23005291–1 . ADAPTOR, QUICK DISCONNECT, MAGNETIC PLUG, F 1
0.6875–16NS
7 AN150826 . STUD, 0.3125–18 X 0.250–28 X 1.094 IN. (27.788 MM) F 6
– 7 AN150827 . STUD (0.003 IN. OS) F AR
– 7 AN150828 . STUD (0.006 IN. OS) F AR
– 7 AN150829 . STUD (0.009 IN. OS) F AR
– 7 AN150830 . STUD (0.012 IN. OS) F AR
8 MS9486–03 . PIN, 0.0625 X 0.250 IN. (1.588 X 6.35 MM) F 1
9 6840421–1 . INSERT, 0.190–32 X 0.313–24 X 0.365 IN. (9.271 MM) F 1
– 9 6840421–2 . INSERT (0.003 IN. OS) F AR
– 9 6840421–3 . INSERT (0.006 IN. OS) F AR
10 AN150538 . STUD, 0.250–20 X 0.190–32 X 1.062 IN. (26.99 MM) F 3
– 10 AN150539 . STUD (0.003 IN. OS) F AR
– 10 AN150540 . STUD (0.006 IN. OS) F AR
– 10 AN150541 . STUD (0.009 IN. OS) F AR
– 10 AN150542 . STUD (0.012 IN. OS) F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 16
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
11 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.175 MM) F 2

– 11 AN150551 . STUD (0.003 IN. OS) F AR
– 11 AN150552 . STUD (0.006 IN. OS) F AR
– 11 AN150553 . STUD (0.009 IN. OS) F AR
– 11 AN150554 . STUD (0.012 IN. OS) F AR
12 AN150574 . STUD, 0.250–20 X 0.190–32 X 1.438 IN. (36.525 MM) F 1
– 12 AN150575 . STUD (0.003 IN. OS) F AR
– 12 AN150576 . STUD (0.006 IN. OS) F AR
– 12 AN150577 . STUD (0.009 IN. OS) F AR
– 12 AN150578 . STUD (0.012 IN. OS) F AR
13 AN150592 . STUD, 0.250–20 X 0.190–32 X 1.625 (41.275 MM) F 2
– 13 AN150593 . STUD (0.003 IN. OS) F AR
– 13 AN150594 . STUD (0.006 IN. OS) F AR
– 13 AN150595 . STUD (0.009 IN. OS) F AR
– 13 AN150596 . STUD (0.012 IN. OS) F AR
14 AN122704 . PIN, 0.187 X 0.375 IN. (4.75 X 9.525 MM) F 2
15 AN150550 . STUD, 0.250–20 X 0.190–32 X 1.188 IN. (30.175 MM) F 23
– 15 AN150551 . STUD (0.003 IN. OS) F AR
– 15 AN150552 . STUD (0.006 IN. OS) F AR
– 15 AN150553 . STUD (0.009 IN. OS) F AR
– 15 AN150554 . STUD (0.012 IN. OS) F AR
16 AN150958 . STUD, 0.313–18 X 0.250–28 X 2.719 IN. (59.538 MM) F 5
– 16 AN150959 . STUD (0.003 IN. OS) F AR
– 16 AN150960 . STUD (0.006 IN. OS) F AR
– 16 AN150961 . STUD (0.009 IN. OS) F AR
– 16 AN150962 . STUD (0.012 IN. OS) F AR
17 AN150940 . STUD, 0.313–18 X 0.250–28 X 2.344 IN. (59.538 MM) F 6
– 17 AN150941 . STUD (0.003 IN. OS) F AR
– 17 AN150942 . STUD (0.006 IN. OS) F AR
– 17 AN150943 . STUD (0.009 IN. OS) F AR
– 17 AN150944 . STUD (0.012 IN. OS) F AR
18 AN122717 . PIN, 0.250 X 0.500 IN. (6.35 X 12.7 MM) F 2
19 AN150850 . STUD, 0.313–18 X 0.250–28 X 1.344 IN. (34.138 MM) F 12
– 19 AN150851 . STUD (0.003 IN. OS) F AR
– 19 AN150852 . STUD (0.006 IN. OS) F AR
– 19 AN150853 . STUD (0.009 IN. OS) F AR
– 19 AN150854 . STUD (0.012 IN. OS) F AR
20 NAS1394–3 . INSERT, 0.190–32 X 0.313–18 X 0.310 IN. (7.874 MM) F 9
21 MS9486–02 . PIN, 0.063 X 0.188 IN. (1.588 X 4.775 MM) F 2
22 MS9016–10 . BUSHING, 0.190–32 F 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 16
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
23 MS9486–25 . PIN, 0.0938 X 0.188 IN. (2.383 X 4.775 MM) F 12

24 MS9016–19 . BUSHING, 0.375–24 F 12
25 MS9047–065 . PIN, 0.094 X 0.250 IN. (2.388 X 6.35 MM) F 1
26 MS9486–01 . PIN, 0.063 X 0.125 IN. (1.588 X 3.175 MM) F 7
27 6843356–1 . CAGE, BEARING (28 MM ID X 8 MM) F 5
– 27 6843356–2 . CAGE (0.003 IN. OS) F AR
– 27 6843356–3 . CAGE (0.006 IN. OS) F AR
– 27 6843356–4 . CAGE (0.012 IN. OS) F AR
– 27 6843356–5 . CAGE (0.018 IN. OS) F AR
28 6843358–1 . CAGE, BEARING, 42 MM ID X 9 MM F 1
(CENTRIFUGAL BREATHER)
– 28 6843358–2 . CAGE (0.003 IN. OS) F AR
– 28 6843358–3 . CAGE (0.006 IN. OS) F AR
– 28 6843358–4 . CAGE (0.012 IN. OS) F AR
– 28 6843358–5 . CAGE (0.018 IN. OS) F AR
29 6892287–1 . CAGE, BEARING, 1.654 ID X 0.467 IN. F 1
(42.012 X 11.862 MM) (STARTER GENERATOR)
– 29 6892287–2 . CAGE (0.003 IN. OS) F AR
– 29 6892287–3 . CAGE (0.006 IN. OS) F AR
30 6840372–12 . PIN–PLUG, ALUMINUM F 2
31 6840372–7 . PIN–PLUG, ALUMINUM F 1
32 NAS1394–3L . INSERT, 0.190–32 X 0.313–24 X 0.310 IN. (7.874 MM) F 9
R – 33 MS17295–031 . STUD, 0.375–X 0.313–24 X 1.438 IN. (36.53 MM) F 4
(FRO MS17295–036)
– 33 MS17295–032 . STUD (0.003 IN. OS) F AR
– 33 MS17295–033 . STUD (0.006 IN. OS) F AR
– 33 MS17295–034 . STUD (0.009 IN. OS) F AR
– 33 MS17295–035 . STUD (0.012 IN. OS) F AR
R 33 MS17295–036 . STUD, 0.375–16 X 0.3125–24 X 1.500 IN. (38.10 MM) F 4
R – 33 MS17295–037 . STUD (0.003 IN. OS) F AR
R – 33 MS17295–038 . STUD (0.006 IN. OS) F AR
34 MS124658 . INSERT, HELICAL COIL, 0.375–24 F 2
37 23008008–1 . BUSHING,1.047 IN. OD X 0.947 IN. ID (27 X 24 MM) F 1
(STANDARD OD) (REF 250 CEB 72–3089)
– 37 23008008–2 . BUSHING (0.0006 IN. OS) F AR
– 37 23008008–3 . BUSHING (0.0012 IN. OS) F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 16
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
38 23053965 . SUPPORT, BEARING, FRONT PTO F 1

(R&R 23059565, PER 250 CEB 72–3194)
– 38 23055933 . SUPPORT, BEARING, FRONT PTO F AR
(SB 23059565, PER 250 CEB 72–3194)
– 38 23059565 . SUPPORT, BEARING, FRONT PTO F 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 16
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
72-60-00
FIGURE 16
PAGE 6
SEP 1/98
TABLE OF CONTENTS
CHAPTER 73
ENGINE FUEL & CONTROL SYSTEM
ENGINE FUEL SYSTEM 73–00

ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE
(250–C30, –C30S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–10–00 1
ACCUMULATOR, FUEL PUMP & FUEL NOZZLE (250–C30P) . . . . . . . . . . . . . . . . . 73–10–00 2
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE:
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–10–00 3
(250–C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–10–00 4
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–10–00 5
ENGINE COMPONENT (FUEL SPRAY NOZZLE ASSY) . . . . . . . . . . . . . . . . . . . . . . 73–10–00 6
LP FUEL FILTER ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–10–00 7
FUEL CONTROL, GOVERNOR & PC FILTER
(250–C30, –C30S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 2
FUEL CONTROL HEATER KIT (250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 3
FUEL CONTROL, GOVERNOR & PC FILTER:
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 4
(250–C30G, C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 5
FUEL CONTROL, HEATER KIT (250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 6
N2 OVERSPEED SOLENOID VALVE ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–20–00 7
POWER TURBINE OVERSPEED:
(250–C30, –C30S, –C30G, –C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 3
(250–C30 ENGINE ASSY 23009300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 4
ENGINE ELECTRICAL HARNESS ASSY:
(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 5
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 6
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 7
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–21–00 8
73-CONTENTS
PAGE 1
SEP 1/98
73-CONTENTS
PAGE 2
SEP 1/98
ENGINE FUEL & CONTROL SYSTEM
73-CHAPTER TITLE
PAGE 1
SEP 1/98
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE (250–C30, –C30S)
73-10-00
FIGURE 1
PAGE 0
SEP 1/98
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE (250–C30, –C30S)
73-10-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
1 ACCUMULATOR, FUEL FILTER, FUEL PUMP &

FUEL NOZZLE (250–C30, –C30S)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) AD REF

1 6851354 . ACCUMULATOR ASSY, 3 CU IN. (49.161 CU CM) AD 1
2 MS21043–3 . NUT, 0.190–32 AD 1
3 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) AD 1
4 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. AD 1
(5.23 X 11.13 X 6.35 MM)
5 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID AD 1
(S P/N MS9825–29)
–––*–––
6 6895832 . TUBE ASSY, PUMP TO FILTER AD 1
(REF 250 CEB A–73–3014)
7 6899191 . TUBE ASSY, FUEL FILTER TO PUMP AD 1
(REF 250 CEB–A–73–3014)
8 AN837–8J . ELBOW, 0.750–16 AD 3
– 8 AN837–8K . ELBOW, 0.750–16 AD ALT
9 AN833–8J . ELBOW, 0.750–16 AD 1
– 9 AN833–8K . ELBOW, 0.750–16 AD ALT
10 AN924–8J . NUT, 0.750–16 AD 4
– 10 AN924–8K . NUT, 0.750–16 AD ALT
– 11 MS9020–08 . PACKING, 0.644 IN. (16.358 MM) ID A 4
(UIA 23062098) (BOEING C30(HU) APPL ONLY)
12 FIG. REF . FILTER ASSY, FUEL, LP AD REF
13 MS21043–4 . NUT, 0.250–28 AD 3
14 MS9584–04 . BOLT, 0.250–28 X 0.375 IN. (9.525 MM) AD 3
15 6891639 . BRACKET ASSY, FUEL FILTER AD 1
–––*–––
16 6896344 . PUMP ASSY, FUEL AD 1
(V99167 P/N 5004506)
(REF PUB. 14W3, 73–10–01 FOR DETAILS)
– 16 6896810 . PUMP ASSY, FUEL AD ALT
(V59875 P/N 394400–1) (REF 250 CEB 73–3043)
R – 16 23057340 . PUMP ASSY, FUEL AD ALT
(V11599 P/N 113320–01A1) (REF 250 CEB 73–3074)
(R&R 23065134, PER 250 CEB 73–3077)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 15/99
UNITS
1234567 CODE ASSY

(V11599 P/N 113320–02A1) (FRO 23070461)
(V11599 P/N 113320–03A1)
17 MS21043–4 . NUT, 0.250–28 AD 3
18 MS9320–10 . WASHER, 0.250 IN. (6.35 MM) ID AD 3
–––*–––
– 19 6891954 . GASKET, 3–BOLT FLANGE (SB 23054602) AD 1
19 23054602 . GASKET, 3–BOLT FLANGE AD 1
21 FIG. REF . NOZZLE ASSY, FUEL AD REF
22 6898930 . SPACER, FUEL NOZZLE, 1.00 IN. ID X 1.38 IN. OD X AD AR
0.062 IN. THICK (25.4 X 35.1 X 1.16 MM)
23 6899408 . WASHER, 1.00 IN. ID X 1.38 IN. OD X 0.031 IN. THICK AD AR
(25.4 X 35.1 X 0.79 MM)
– 24 6875224 . ACCUMULATOR, 6 IN. CU (UIA 23062098) A 1
(BOEING C30(HU) ONLY) (FRO 23069705)
24 23069705 . ACCUMULATOR, 6 IN. CU A 1
(UIA 23062098) (BOEING C30(HU) ONLY)
25 23065552 . BRACKET, ANGLED – ACCUMULATOR A 1
26 MS21043–3 . NUT, SLFLKG, 0.190–32 A 1
27 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) A 1
28 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID A 1
–––*–––
R 29 23065484 . TUBE ASSY, AIR, ACCUMULATOR TO BLEED VALVE A 1
SOLENOID (UIA 23062098) (BOEING C30(HU) ONLY)
R 30 23065489 . TUBE ASSY, AIR, BLEED VALVE TO ACCUMULATOR A 1
31 AN815–4J . UNION, 0.4375–20 A 2
– 31 AN815–4K . UNION, 0.4375–20 A ALT
32 AS3084–04 . PACKING, 0.351 IN. (8.915 MM) ID A 3
33 AN939D4 . ELBOW, 0.4375–20 A 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
ACCUMULATOR, FUEL PUMP & FUEL NOZZLE (250–C30P)

FIGURE 2
73-10-00
FIGURE 2
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
2 ACCUMULATOR, FUEL PUMP & FUEL NOZZLE

(250–C30P)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 5) B REF

1 6875224 . ACCUMULATOR ASSY, 6 CU IN. (98.43 CU CM) B 1
2 MS21043–3 . NUT, 0.190–32 B 1
3 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) B 1
(5.23 X 11.13 X 6.35 MM)
5 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID B 1
(S P/N MS9825–29)
–––*–––
6 6894080 . PUMP ASSY, FUEL B 1
(V99167 P/N 5000950D)
(SEE PUB. 14W3, 73–10–06 FOR DETAILS)
7 6896822 . PUMP ASSY, FUEL B ALT
(V68037 P/N 388100–5) (REF 250 CEB 73–3043)
(SEE PUB. 14W3, 73–10–07 FOR DETAILS)
R – 7 23057339 . PUMP ASSY, FUEL B ALT
(V11599 P/N 113310–01A1) (REF 250 CEB 73–3074)
(R&R 23065133, PER 250 CEB A–73–3077)
R – 7 23065133 . PUMP ASSY, FUEL B ALT
(V11599 P/N 113310–02A1) (FRO 23070460)
– 7 23070460 . PUMP ASSY, FUEL B ALT
(V11599 P/N 113320–03A1)
8 MS21043–4 . NUT, 0.250–28 B 3
–––*–––
10 6891954 . GASKET, 3–BOLT FLANGE (SB 23054602) B 1
– 10 23054602 . GASKET, 3–BOLT FLANGE B 1
11 6898517 . PACKING, 0.537 IN. (13.64 MM) ID B 1
(UW 6896822, 23057339 & 23065133 &
23070460 PUMP ASSY)
12 FIG. REF . NOZZLE ASSY, FUEL B REF
13 6898930 . SPACER, FUEL NOZZLE, 1.00 IN. ID X 1.38 IN. OD B AR
X 0.062 IN. THICK (25.4 X 35.1 X 1.16 MM)
14 6899408 . WASHER, 1.00 IN. ID X 1.38 IN. OD X 0.031 IN. THICK B AR
(25.4 X 35.1 X 0.79 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE (250–C30M)

FIGURE 3
73-10-00
FIGURE 3
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY

FUEL NOZZLE) (250–C30M)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 6) C REF

R 1 6851354 . ACCUMULATOR ASSY, 3 CU IN. (49.161 CU CM) C 1
(DISC.) (SB 6886430E070A, REF 73–20–00, FIG. 4)
(REF 250 CEB 73–3064)
2 MS21043–3 . NUT, 0.190–32 (DISC.) (REF 250 CEB 73–3064) C 1
3 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) (DISC.) C 1
(REF 250 CEB 73–3064)
4 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. (DISC.) C 1
(5.23 X 11.13 X 6.35 MM) (REF 250 CEB 73–3064)
5 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID C 1
(DISC.) (REF 250 CEB 73–3064)
(S P/N MS9825–29)
–––*–––
6 23005268 . TUBE ASSY, PUMP TO FILTER C 1
7 23005269 . TUBE ASSY, FUEL FILTER TO PUMP C 1
8 MS21043–3 . NUT, 0.190–28 C 1
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
9 AN837–8J . ELBOW, 0.750–16 C 2
– 9 AN837–8K . ELBOW, 0.750–16 C ALT
10 AN833–8J . ELBOW, 0.750–16 C 1
– 10 AN833–8K . ELBOW, 0.750–16 C ALT
11 AN815–8J . UNION, 0.750–16 C 1
– 11 AN815–8K . UNION, 0.750–16 C ALT
12 AN924–8J . NUT, 0.750–16 C 3
– 12 AN924–8K . NUT, 0.750–16 C ALT
14 FIG. REF . FILTER ASSY, FUEL, LP C REF
15 MS21043–5 . NUT, 0.3125–24 C 4
17 AN960C416L . WASHER, 0.250 IN. (6.35 MM) ID C 3
18 MS9501–20 . BOLT, 0.250–28 X 1.375 IN. (34.925 MM) C 3
19 23005229 . BRACKET, SPARE PAD COVER & FUEL FILTER C 1
20 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE C 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
21 6896344 . PUMP ASSY, FUEL C 1

(V99167 P/N 5004506)
(REF PUB. 14W3, 73–10–01, FOR DETAILS)
– 21 6896810 . PUMP ASSY, FUEL C ALT
(V59875 P/N 394400–1) (REF 250 CEB 73–3043)
R – 21 23057340 . PUMP ASSY, FUEL C ALT
(V11599 P/N 113320–01A1) (REF 250 CEB 73–3074)
(R&R 23065134, PER 250 CEB 73–3077)
R – 21 23065134 . PUMP ASSY, FUEL C ALT
(V11599 P/N 113320–02A1) (FRO 23070461)
– 21 23070461 . PUMP ASSY, FUEL C ALT
(V11599 P/N 113320–03A1)
22 MS21043–4 . NUT, 0.250–28 C 3
–––*–––
24 6891954 . GASKET, 3–BOLT FLANGE (SB 23054602) C 1
– 24 23054602 . GASKET, 3–BOLT FLANGE C 1
26 FIG. REF . NOZZLE ASSY, FUEL C REF
27 6898930 . SPACER, FUEL NOZZLE, 1.00 IN. ID X 1.38 IN. OD C AR
X 0.062 IN. THICK (25.4 X 35.1 X 1.16 MM)
28 6899408 . WASHER, 1.00 IN. ID X 1.38 IN. OD X 0.031 IN. THICK C AR
(25.4 X 35.1 X 0.79 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 15/99
73-10-00
FIGURE 3
PAGE 3
SEP 1/98
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE (250–C30G)

73-10-00
FIGURE 4
PAGE 0
SEP 1/98

73-10-00
FIGURE 4
PAGE 1
SEP 1/98

73-10-00
FIGURE 4
PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY

FUEL NOZZLE (250–C30G)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) E REF

1 6851354 . ACCUMULATOR ASSY, 3 CU IN. (49.161 CU CM) E 1
2 6875224 . ACCUMULATOR ASSY, 6 CU IN. (98.43 CU CM) E 2
R 3 MS21043–3 . NUT, 0.190–32 E 2
4 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) E 2
5 6823260 . SPACER, 0.206 ID X 0.500 OD X 0.250 IN. E 2
(5.23 X 12.70 X 6.35 MM)
6 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID E 2
–––*–––
7 AN815–4J . UNION, 0.4375–20 E 2
7 AN815–4K . UNION, 0.4375–20 E ALT
9 AN939D–4 . ELBOW, 0.4375–20 E 1
10 6886430E087A . HOSE ASSY E 1
11 AN833–4J . ELBOW, 0.4375–20 E 1
– 11 AN833–4K . ELBOW, 0.4375–20 E ALT
12 AN924–4J . NUT, 0.4375–20 E 1
– 12 AN924–4K . NUT, 0.4375–20 E ALT
14 23053295 . TUBE ASSY, PUMP TO FILTER E 1
15 23053296 . TUBE ASSY, FUEL FILTER TO PUMP E 1
16 MS21043–3 . NUT, 0.190–32 E 1
– 16 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) E 1
– 16 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. E 1
(5.23 X 11.13 X 6.35 MM)
– 16 23039030–07 . CLAMP, CUSHIONED, 0.500 IN. (12.7 MM) ID E 2
–––*–––
17 AN837–8J . ELBOW, 0.750–16 E 2
– 17 AN837–8K . ELBOW, 0.750–16 E ALT
18 AN833–8J . ELBOW, 0.750–16 E 1
– 18 AN833–8K . ELBOW, 0.750–16 E ALT
19 AN815–8J . UNION, 0.750–16 E 1
– 19 AN815–8K . UNION, 0.750–16 E ALT
20 AN924–8J . NUT, 0.750–16 E 3
– 20 AN924–8K . NUT, 0.750–16 E ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
22 FIG. REF . FILTER ASSY, FUEL, LP E REF

23 MS21043–5 . NUT, 0.3125–24 E 4
24 MS9320–11 . WASHER, 0.312 IN. (7.93 MM) ID E 4
25 AN960C416L . WASHER, 0.250 IN. (6.35 MM) ID E 3
26 MS9501–20 . BOLT, 0.250–28 X 1.375 IN. (34.925 MM) E 3
–––*–––
27 23005229 . BRACKET, SPARE PAD COVER & FUEL FILTER E 1
28 MS9135–01 . GASKET, ENGINE ACCESSORY DRIVE (SB 23052955) E 1
– 28 23052955 . GASKET, ENGINE ACCESSORY DRIVE E 1
29 6896344 . PUMP ASSY, FUEL E 1
(V99167 P/N 5004506)
– 29 6896810 . PUMP ASSY, FUEL E ALT
(V59875 P/N 394400–1)
R – 29 23057340 . PUMP ASSY, FUEL E ALT
(V11599 P/N 113320–01A1) (REF 250 CEB 73–3074)
(R&R 23065134, PER 250 CEB 73–3077)
R – 29 23065134 . PUMP ASSY, FUEL E ALT
(V11599 P/N 113320–02A1) (FRO 23070461)
– 29 23070461 . PUMP ASSY, FUEL E ALT
(V11599 P/N 113320–03A1)
30 MS21043–4 . NUT, 0.250–28 E 3
31 MS9320–10 . WASHER, 0.250 IN. (6.35 MM) ID E 3
–––*–––
32 6891954 . GASKET, 3–BOLT FLANGE (SB 23054602) E 1
– 32 23054602 . GASKET, 3–BOLT FLANGE E 1
34 FIG. REF . NOZZLE ASSY, FUEL E REF
35 6898930 . SPACER, FUEL NOZZLE, 1.00 IN. ID X 1.38 IN. OD E AR
OD X 0.062 IN. THICK (25.4 X 35.1 X 1.16 MM)
36 6899408 . WASHER, 1.00 IN. ID X 1.38 IN. OD X 0.031 IN. THICK E AR
(25.4 X 35.1 X 0.79 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
73-10-00
FIGURE 4
PAGE 5
SEP 1/98
ACCUMULATOR, FUEL FILTER, FUEL PUMP & FUEL NOZZLE (250–C30G/2)

73-10-00
FIGURE 5
PAGE 0
SEP 1/98

73-10-00
FIGURE 5
PAGE 1
DEC 15/01

73-10-00
FIGURE 5
PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY

FUEL NOZZLE) (250–C30G/2)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) F REF

1 6851354 . ACCUMULATOR ASSY, 3 CU IN. (49.161 CU CM) F 1
2 6875224 . ACCUMULATOR ASSY, 6 CU IN. (98.43 CU CM) F 1
R 3 MS21043–3 . NUT, 0.190–32 F 1
4 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) F 1
5 AN101037 . BOLT, 0.190–32 X 3.125 IN. (79.38 MM) F 1
(5.23 X 12.70 X 6.35 MM)
(5.23 X 12.70 X 6.35 MM)
8 23039030–27 . CLAMP, CUSHIONED, 1.875 IN. (47.63 MM) ID F 2
–––*–––
9 AN815–4J . UNION, 0.4375–20 F 2
– 9 AN815–4K . UNION, 0.4375–20 F ALT
11 AN939D–4 . ELBOW, 0.4375–20 F 1
12 6886430E070 . HOSE ASSY F 1
– 12 6886430E087A . HOSE ASSY F ALT
13 AN833–4J . ELBOW, 0.4375–20 F 1
– 13 AN833–4K . ELBOW, 0.4375–20 F ALT
14 AN924–4J . NUT, 0.4375–20 F 1
– 14 AN924–4K . NUT, 0.4375–20 F ALT
16 23053295 . TUBE ASSY, PUMP TO FILTER F 1
17 23053296 . TUBE ASSY, FUEL FILTER TO PUMP F 1
18 MS21043–3 . NUT, 0.190–32 F 1
19 AN101013 . BOLT, 0.190–32 X 0.812 IN. (20.63 MM) F 1
(5.23 X 11.13 X 6.35 MM)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
22 AN837–8J . ELBOW, 0.750–16 F 2

– 22 AN837–8K . ELBOW, 0.750–16 F ALT
23 AN833–8J . ELBOW, 0.750–16 F 1
– 23 AN833–8K . ELBOW, 0.750–16 F ALT
24 AN815–8J . UNION, 0.750–16 F 1
– 24 AN815–8K . UNION, 0.750–16 F ALT
25 AN924–8J . NUT, 0.750–16 F 3
– 25 AN924–8K . NUT, 0.750–16 F ALT
27 FIG. REF . FILTER ASSY, FUEL, LP F REF
28 MS21043–5 . NUT, 0.3125–24 F 4
30 AN960C416L . WASHER, 0.250 IN. (6.35 MM) ID F 3
31 MS9501–20 . BOLT, 0.250–28 X 1.375 IN. (34.925 MM) F 3
–––*–––
32 23005229 . BRACKET, SPARE PAD COVER & FUEL FILTER F 1
–––*–––
34 6896344 . PUMP ASSY, FUEL F 1
(V99167 P/N 5004506)
– 34 6896810 . PUMP ASSY, FUEL F ALT
(V59875 P/N 394400–1)
R – 34 23057340 . PUMP ASSY, FUEL F ALT
(V11599 P/N 113320–01A1) (REF 250 CEB 73–3074)
(R&R 23065134, PER 250 CEB 73–3077)
R – 34 23065134 . PUMP ASSY, FUEL F ALT
(V11599 P/N 113320–02A1) (FRO 23070461)
– 34 23070461 . PUMP ASSY, FUEL F ALT
(V11599 P/N 113320–03A1)
35 MS21043–4 . NUT, 0.250–28 F 3
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
37 23054602 . GASKET, 3–BOLT FLANGE F 1

39 . NOZZLE ASSY, FUEL F REF
40 6898930 . SPACER, FUEL NOZZLE, 1.00 IN. ID X 1.38 IN. OD F AR
OD X 0.062 IN. THICK (25.4 X 35.1 X 1.16 MM)
41 6899408 . WASHER, 1.00 IN. ID X 1.38 IN. OD X 0.031 IN. THICK F AR
(25.4 X 35.1 X 0.79 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
ENGINE COMPONENT (FUEL SPRAY NOZZLE ASSY)

FIGURE 6
73-10-00
FIGURE 6
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
6 ENGINE COMPONENT (FUEL SPRAY NOZZLE ASSY)
– 1 6899001 NOZZLE ASSY, FUEL SPRAY (REF 73–10–00, 1

FIG. 1, 2, 3, 4 OR 5 FOR NHA)
2 5233597 . BODY, INJECTOR (FRO 47102) 1
– 2 47102 . BODY, NOZZLE (V71895) 1
3 5233414 . FILTER ASSY, INJECTOR (V71934) (FRO 47086) 1
– 3 47086 . FILTER ASSY (V71895) 1
4 5233599 . NUT ASSY, INJECTOR (V71934) (FRO 49583) 1
– 4 49583 . NUT TIP ASSY (V71895) 1
5 5232403 . . PIN, INJECTOR VALVE RETAINING (V1934) 1
FRO 47085)
– 5 47085 . . PIN, VALVE RETAINING (V71895) 1
6 5233412 . . VALVE CAGE ASSY, INJECTOR (V71934) 1
(MATCHED SET OF 5232274 & 5233413) (FRO 47080)
– 6 47080 . . PISTON & SLEEVE ASSY (V71895) 1
7 5232274 . . . VALVE ASSY, INJECTOR METERING (V71934) NP
(UIA 5233412)
8 5233413 . . . CAGE, INJECTOR VALVE (V71934) (UIA 5233412) NP
9 5232328 . . SEAT, INJECTOR VALVE SPRING (V71934) 1
(FRO 47079)
– 9 47079 . . SEAT, SPRING (V71895) 1
10 5233594 . . SPRING, INJECTOR VALVE (V71934) (FRO 47108) 1
– 10 47108 . . SPRING (V71895) 1
11 5232358 . . SHIM, INJECTOR, 0.005 IN. (0.14 MM) (V71934) AR
(FRO 47077)
– 11 47077 . . SHIM (V71895) AR
12 5233591 . . SPACER, INJECTOR SPRAY TIP (V71934) (FRO 47107) 1
– 12 47107 . . SPACER (V71895) 1
13 5233589 . . SPRAY TIP ASSY, INJECTOR, INNER (V71934) 1
(FRO 47105)
– 13 47105 . . METERING SET (V71895) 1
14 5233598 . . NUT, INJECTOR SPRAY TIP (V71934) (FRO 47104) 1
– 14 47104 . . SHROUD, INNER AIR (V71895) 1
15 5233592 . AIR SHROUD NUT ASSY, INJECTOR (V71934) 1
(FRO 47109)
– 15 47109 . AIR SHROUD, ASSY (V71895) 1
16 5233424 . CAP, SHIPPING, PROTECTIVE SEAL (V71934) 1
(FRO 28535–13)
– 16 528535–13 . CAP, PROTECTIVE SEAL (V71985) 1
17 5228317 . CAP, SHIPPING, PROTECTIVE SEAL (V71934) 1
(FRO 28536–4)
– 17 528536–4 . CAP, PROTECTIVE SEAL (V71895) 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
LP FUEL FILTER ASSY

FIGURE 7
73-10-00
FIGURE 7
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
7 LP FUEL FILTER ASSY
– 1 6896809 FILTER ASSY, FUEL, LP AD 1

(R&R 6899278, PER 250 CEB 73–3007)
– 1 6899278 FILTER ASSY, FUEL LP (REF 73–10–00) AD 1
(R&R 23003143, PER 250 CEB 73–3011)
(REF 250 CEB 73–3013)
– 1 23003143 FILTER ASSY, FUEL LP (REF 73–10–00, ACDEF 1
FIGS. 1, 3, 4 OR 5 FOR NHA) (REF 250 CEB 73–3013)
2 033614–02 . BOWL (V90005) ACDEF 1
3 1735475–02 . ELEMENT ASSY (V90005) ACDEF 1
– 3 6896845 . ELEMENT, FILTER, 10–MICRON (FIELD REPL) ACDEF 1
– 3 23037765 . ELEMENT, FILTER ACDEF AR
4 907767 . RING, RETAINING (V90005) ACDEF 1
5 1736995–01 . SPRING (V90005) ACDEF 1
6 911248 . WASHER (V90005) ACDEF 1
7 MS29513–012 . PACKING, 0.364 IN. (9.246 MM) ID ACDEF 1
8 1736884 . CAP (V90005) ACDEF 1
8 A 1739728 . KEEPER, RETAINING RING (V90005) ACDEF 1
9 1737391 . RING, RETAINING (V90005) ACDEF 1
10 1736886 . POST, CENTER (V90005) (UW 1735479 NIPPLE) ACDEF 1
– 10 1737701 . POST, CENTER (V90005) (UW 1737704 NIPPLE) ACDEF 1
13 AN814–5DL . PLUG, 0.500–20 ACDEF 2
15 1736659 . INDICATOR ASSY (V90005) ACDEF 1
16 1736883 . PACKING (V90005) ACDEF 1
18 1735479–01 . NIPPLE ASSY (V90005) (UW 1736886 POST) ACDEF 1
– 18 1737704 . NIPPLE ASSY (V90005) (UW 1737701 POST) ACDEF 1
19 1735517 . SPRING, BYPASS (V90005) ACDEF 1
20 047749–01 . VALVE, BYPASS (V90005) ACDEF 1
21 NAS1593–015 . PACKING, 0.551 IN. (13.995 MM) ID ACDEF 1
22 1736235–01 . HEAD ASSY (V90005) ACDEF 1
23 1735480–04 . NAMEPLATE (V90005) ACDEF 1
– 24 1737610 . DECAL, TORQUE WARNING (V90005) ACDEF 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 7
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
FUEL CONTROL, GOVERNOR & Pc FILTER (250–C30, –C30S)

73-20-00
FIGURE 1
PAGE 0
SEP 1/98

73-20-00
FIGURE 1
PAGE 1
SEP 1/98

73-20-00
FIGURE 1
PAGE 2
SEP 1/98

73-20-00
FIGURE 1
PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
1 FUEL CONTROL, GOVERNOR & Pc FILTER

(250–C30, –C30S)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) AD REF

1 6895831 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS AD 1
(FRO 23001826)
– 1 23001826 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS AD 1
2 6890580 . TUBE ASSY, FUEL CONTROL TO FIRESHIELD AD 1
3 6890581 . TUBE ASSY, FUEL CONTROL TO ACCUMULATOR AD 1
(UW AN832–4J UNION) (FRO 6899208)
3 6899208 . TUBE ASSY, FUEL CONTROL TO ACCUMULATOR AD 1
(UW AN815–4J UNION)
4 6890578 . TUBE ASSY, FUEL CONTROL TO PUMP AD 1
5 6898724 . TUBE ASSY, SCROLL TO GOVERNOR Pc TEE A 1
(FRO 6899249)
– 5 6899249 . TUBE ASSY, SCROLL TO GOVERNOR Pc TEE A 1
– ATTACHING PARTS
6 MS21043–3 . NUT, 0.190–32 A 2
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 2
8 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID A 2
8 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID A 2
8 6864061–08 . BUSHING, SPLIT, 0.250 IN. (6.35 MM) ID A 2
9 6844316 . BRACKET, ANGLE, 90° A 1
– 9 MS9597–074 . BRACKET, ANGLE, 90° A ALT
–––*–––
R – 10 6899249 . TUBE ASSY, SCROLL TO Pc FILTER AD 1
(REF 250 CEB A–73–3032)
(SB 23065569, PER 250 CEB 72–3232)
R 10 23065569 . TUBE ASSY, Pc SCROLL TO Pc FILTER AD 1
(UW 23066737 COMPR SCROLL ASSY,
REF 250 CEB 72–3232)
R 10 A MS9193–04 . NIPPLE, TUBE, 0.4375–20 (UW 23065569) AD 1
(ADDED PER 250 CEB 72–3232)
R 10 B AS3208–04 . PACKING, 0.351 IN. (8.92 MM) ID (UW 23065569) AD 1
– 11 23001987 . TUBE ASSY, Pc FILTER TO GOVERNOR AD 1
(SB 23033885, PER 250 CEB A–75–3021)
11 23033885 . TUBE ASSY, Pc FILTER TO GOVERNOR AD 1
(REF 250 CEB 75–3020)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
– ATTACHING PARTS
12 MS21043–3 . NUT, 0.190–32 AD 3
13 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) AD 3
R 14 MS9593–052 . BRACKET, ANGLE, 90° (REF 250 CEB A–75–3021) AD 1
(SB MS9593–198, PER 250 CEB 72–3232)
R – 14 MS9593–198 . BRACKET, ANGLE, 90° (REF 250 CEB A–75–3021) AD 1
(REF 250 CEB 72–3232)
–––*–––
– 16 6875726 . FILTER ASSY, Pc AD 1
(R&R 23033400, PER 250 CEB A–75–3017)
– 16 6874958 . FILTER ASSY, Pc AD ALT
(SB 23033422, PER 250 CEB A–75–3017)
16 23033400 . FILTER ASSY, Pc AD 1
– 16 23033422 . FILTER ASSY, Pc AD ALT
– ATTACHING PARTS
–––*––
18 11–971 . . ELEMENT ASSY (V14818) (UIA 6875726 & 23033400) AD 1
– 18 400621 . . ELEMENT ASSY (V05160) (UIA 6874958 & 23033422) AD ALT
19 1006–53 . . SEAL (V14818) (UIA 6875726) AD 1
– 19 AS3085–122 . . PACKING, 1.112 IN. (28.245 MM) ID (UIA 6875726) AD ALT
– 19 MS83248/1–122 . . PACKING, 1.112 IN. (28.245 MM) ID (UIA 23033400) AD ALT
– 19 6896804 . . SEAL, O–RING (UIA 6874958) AD ALT
20 1004–147 . . HOUSING ASSY (V14818) (UIA 6875726) AD 1
– 20 6891966 . . HOUSING ASSY (UIA 6874958) AD ALT
– 20 23034711 . . HOUSING ASSY (V14818) AD AR
21 6890587 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, NO. 4 AD 1
X 17.875 IN. (454.025 MM) (FRO 23005204)
– 21 23005204 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, NO. 4 AD 1
X 17.75 IN. (450.85 MM)
22 AN832–4J . UNION, 0.4375–20 AD 1
– 22 AN832–4K . UNION, 0.4375–20 AD ALT
23 AN924–4J . NUT, 0.4375–20 AD 1
– 23 AN924–4K . NUT, 0.4375–20 AD ALT
24 AN960–716 . WASHER, 0.4375 IN. (11.112 MM) ID AD 2
25 6891634 . TUBE ASSY, FUEL CONTROL TO PY TEE AD 1
(DISC. ON 23008585 FUEL SYSTEM ASSY,
PER 250 CEB 73–3047)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
UNITS
1234567 CODE ASSY
26 23039785 . TUBE ASSY, PY AIR, FUEL CONTROL TO GOVERNOR A 1

(ADDED ON 23008585 FUEL SYSTEM ASSY,
PER 250 CEB 73–3047)
27 6890584 . TUBE ASSY, ACCUMULATOR TO GOVERNOR AD 1
28 6893073 . TUBE ASSY, CONTROL TO Pc TEE AD 1
29 MS21043–3 . NUT, 0.190–32 AD 1
30 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) AD 1
31 6864046–02 . CLIP, OUTER, 0.475 IN. (12.065 MM) ID AD 2
31 6864045–02 . CLIP, INNER, 0.445 IN. (11.303 MM) ID AD 2
31 6864061–08 . BUSHING, SPLIT, 0.250 IN. (6.35 MM) ID AD 2
–––*––
32 6890583 . TUBE ASSY, FUEL CONTROL TO GOVERNOR AD 1
33 6890586 . TUBE ASSY, GOVERNOR TO PY TEE AD 1
PER 250 CEB 73–3047)
34 AN804–4J . TEE, 0.4375–20 (DISC. ON 23008585 AD 1
FUEL SYSTEM ASSY, PER 250 CEB 73–3047)
– 34 AN804–4K . TEE, 0.4375–20 (DISC. ON 23008585 AD ALT
35 AN924–4J . NUT, 0.4375–20 (DISC. ON 23008585 AD 1
– 35 AN924–4K . NUT, 0.4375–20 (DISC. ON 23008585 AD ALT
PER 250 CEB 73–3047)
37 FIG. REF . VALVE ASSY, N2 OVERSPEED SOLENOID (N/C) AD REF
(REF 73–20–00, FIG. 5 FOR DETAIL PARTS)
PER 250 CEB 73–3047)
– ATTACHING PARTS
38 MS21043–3 . NUT, 0.190–32 (DISC. ON 23008585 FUEL SYSTEM AD 2
ASSY, PER 250 CEB 73–3047)
39 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) AD 2
PER 250 CEB 73–3047)
–––*–––
– 40 AN832–4J . UNION, 0.4375–20 (UW 6890581 TUBE) AD 3
(FRO AN815–4J)
– 40 AN832–4K . UNION, 0.4375–20 AD ALT
40 AN815–4J . UNION, 0.4375–20 (UW 6899208 TUBE) AD 3
– 40 AN815–4K . UNION, 0.4375–20 AD ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
UNITS
1234567 CODE ASSY

42 AN939D4 . ELBOW, 0.4375–20 AD 1
NOTE: REFER TO PUB. 14W3, CHAPTER 73–20–02,

FOR FUEL CONTROL PARTS INFORMATION.
43 6899068 . CONTROL ASSY, FUEL, GAS PRODUCER A ALT

(V9X173 P/N 2524745–3)
(R&R 6899308, PER 250 CEB 73–3003) (CANNOT BE
USED ON 23009300 ENGINE ASSY)
– 43 6899299 . CONTROL ASSY, FUEL, GAS PRODUCER A 1
(V9X173 P/N 2524745–5)
(R&R 6899308, PER 250 CEB 73–3003)
(REF 250 CEB 73–3019) (CANNOT BE
(V9X173 P/N 2524745–6)
(R&R 6899265, PER 250 CEB 73–3002)
(R&R 23003138, PER 250 CEB 73–3010)
(REF 250 CEB 73–3019) (CANNOT BE USED
ON 23009300 ENGINE ASSY)
(V9X173 P/N 2524745–9)
(R&R 6898899, PER 250 CEB 73–3001)
(R&R 23003139, PER 250 CEB 73–3010)
(V9X173 P/N 2524745–13)
(R&R 23003140, PER 250 CEB 73–3010)
– 43 23003140 . CONTROL ASSY, FUEL, GAS PRODUCER AD ALT
(V9X173 P/N 2524745–14)
(R&R 23001798, PER 250 CEB 73–3009)
(R&R 23007804, PER 250 CEB 73–3027)
(R&R 23030637, PER 250 CEB 73–3022)
(V9X173 P/N 2524745–14M)
(R&R 23030638, PER 250 CEB 73–3022)
(REF 250 CEB 73–3027)
(CANNOT BE USED ON 23009300 ENGINE ASSY)
– 43 23003138 . CONTROL ASSY, FUEL, GAS PRODUCER A ALT
(V9X173 P/N 2524745–14 L.I. (–9) & (–13)
(R&R 23003139, PER 250 CEB 73–3002)
(REF 250 CEB 73–3019) (R&R 23007805
PER 250 CEB 73–3027)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 15/99
UNITS
1234567 CODE ASSY

(V9X173 P/N 2524745–14–M L.I. (–9) & (–13)
(REF 250 CEB 73–3027)
– 43 23003139 . CONTROL ASSY, FUEL, GAS PRODUCER A ALT
(V9X173 P/N 2524745–14 L.I. (–13)
(R&R 23003140, PER 250 CEB 73–3001)
(R&R 23007806, PER 250 CEB 73–3027)
(REF 250 CEB 73–3019)
(V9X173 P/N 2524745–14 –M L.I. (–13)
(REF 250 CEB 73–3027)
(V9X173 P/N 2524745–17)
(R&R 23007508, PER 250 CEB 73–3027)
(R&R 23007850, PER 250 CEB 73–3022)
(REF 250 CEB 73–3019)
(V9X173 P/N 2524745–17M)
(R&R 23030617, PER 250 CEB 73–3022)
– 43 23007850 . CONTROL ASSY, FUEL, GAS PRODUCER AD 1
(V9X173 P/N 2524745–19)
(R&R 23030617, PER 250 CEB 73–3027)
(V9X173 P/N 2524745–19 L.I.(–17)
(R&R 23030638, PER 250 CEB 73–3027)
(V9X173 P/N 2524745–19M)
(R&R 23007501, PER 250 CEB 73–3024)
(V9X173 P/N 2524745–19–M L.I.(–17)
(R&R 23030639, PER 250 CEB 73–3024)
(V9X173 P/N 2524745–20)
(R&R 23034047, PER 250 CEB 73–3028)
(R&R 23033846, PER 250 CEB 73–3029)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 8
NOV 15/99
UNITS
1234567 CODE ASSY

(V9X173 P/N 2524745–20 L.I.(–17)
(R&R 23034048, PER 250 CEB 73–3028)
(V9X173 P/N 2524745–22)
(V9X173 P/N 2524854–1) (REF 250 CEB 73–3019)
(R&R 23007896, PER 250 CEB 73–3027)
(R&R 23007851, PER 250 CEB 73–3022)
(V9X173 P/N 2524854–1M)
(R&R 23007897, PER 250 CEB 73–3022)
(V9X173 P/N 2524854–3)
(R&R 23007897, PER 250 CEB 73–3027)
(V9X173 P/N 2524854–3M)
(R&R 23007502, PER 250 CEB 73–3024)
(V9X173 P/N 2524854–4)
(R&R 23034049, PER 250 CEB 73–3028)
(R&R 23033848, PER 250 CEB 73–3029)
(V9X173 P/N 2524854–6)
– 43 23034047 . CONTROL ASSY, FUEL, GAS PRODUCER AR
(V9X173 P/N 2549010–1) (SERV REIDENT OF 23007501)
(V9X173 P/N 2549001–1)
(R&R 23034700, PER 250 CEB 73–3030)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 9
NOV 15/99
UNITS
1234567 CODE ASSY

(V9X173 P/N 2549001–2)
(V9X173 P/N 2524944–1)
(R&R 23009171, PER 250 CEB 73–3022)
(V9X173 P/N 2524944–2) (REF 250 CEB 73–3022)
(V9X173 P/N 2524944–3)
(R&R 23030642, PER 250 CEB 73–3028)
(R&R 23033847, PER 250 CEB 73–3029)
(R&R 23034045, PER 250 CEB 73–3030)
– 43 23034045 . CONTROL ASSY, FUEL, GAS PRODUCER AD AR
(V9X173 P/N 2524944–4)
(V9X173 P/N 2524944–5) (FRO 23038956)
(V9X173 P/N 2524944–6)
(R&R 23056927, PER 250 CEB 73–3060)
(V9X173 P/N 2524922–4)
(R&R 23034046, PER 250 CEB 73–3030)
(V9X173 P/N 2524922–5) (REF PUB. 14W3,
CHAPTER 73–20–02 FOR DETAILS)
(R&R 23033849, PER 250 CEB 73–3029)
(V9X173 P/N 2524922–6) (REF 250 CEB 73–3042)
(R&R 23038956, PER 250 CEB 73–3039)
(V9X173 P/N 2524922–7)
(R&R 23056926, PER 250 CEB 73–3060)
(V9X173 P/N 2524922–8)
(R&R 23057333, PER 250 CEB 73–3061)
(V9X173 P/N 2524854–7)
(V9X173 P/N 2524922–9)
(R&R 23052286, PER 250 CEB 73–3063)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 10
NOV 15/99
UNITS
1234567 CODE ASSY
– 43 23052286 . CONTROL ASSY, FUEL GAS PRODUCER AD 1

(V9X173 P/N 2549092–1) (FRO 23059790)
(V9X173 P/N 2549092–2)
(R&R 23059933, PER 250 CEB A–73–3068)
(V9X173 P/N 2549092–3) (FRO 23065147)
(R&R 23065116, PER 250 CEB 73–3083)
(REF 250 CEB 73–3098)
R – 43 23065147 . CONTROL ASSY, FUEL, GAS PRODUCER AD 1
(V9X173 P/N 2549092–5)
(SB 23070613, PER 250 CEB 73–3106)
R 43 23070613 . CONTROL ASSY, FUEL, GAS PRODUCER AD 1
(V9X173 P/N 2549092–6) (REF 250 CEB 73–3106)
(V9X173 P/N 2524944–12)
(FOR SERV USE & SPARE PARTS PROC ON C30S)
(SB 23065147)
(V9X173 P/N 2524944–7)
(R&R 23057332, PER 250 CEB 73–3061)
(V9X173 P/N 2524944–8)
(R&R 23065115, PER 250 CEB 73–3083)
(V9X173 P/N 2524944–10)
(R&R 23065115, PER 250 CEB 73–3083)
(REF 250 CEB A–3068, 73–3098)
(V9X173 P/N 2549092–4)
(R&R 23065147, PER 250 CEB 73–3085)
(V9X173 P/N 2524944–11)
(R&R 23065146, PER 250 CEB 73–3085)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 11
DEC 15/01
UNITS
1234567 CODE ASSY
– ATTACHING PARTS
44 MS21043–4 . NUT, 0.250–28 AD 3
–––*–––
– 45 A 557S6 . . PACKING (V9X173) (REF 250 CEB 73–3013) AD 1
46 951395 . . PACKING (V9X173) AD 1
47 951394 . . PACKING (V9X173) AD 1
48 953515–4 . . PACKING (V9X173) AD 1
49 953508–8 . . PACKING (V9X173) AD 2
50 2537533–10 . . SHIM, 0.010 IN. (0.25 MM) THICK (V9X173) AD 2
51 2538801 . . ADAPTER, COUPLING (V9X173) AD 1
– 52 6805372 . GASKET, 1.500 IN. (38.10 MM) DIA, AD 1
3–BOLT FLANGE (FRO 23053993)
52 23053993 . GASKET, 1.500 IN. (38.1 MM) DIA, 3–BOLT FLANGE AD 1
53 AN833–4J . ELBOW, 0.4375–20 AD 1
– 53 AN833–4K . ELBOW, 0.4375–20 AD ALT
54 AN924–4J . NUT, 0.4375–20 AD 1
– 54 AN924–4K . NUT, 0.4375–20 AD ALT
56 AN815–4J . UNION, 0.4375–20 AD 1
– 56 AN815–4K . UNION, 0.4375–20 AD ALT
57 AN815–4J . UNION, 0.4375–20 AD 1
(UW FUEL CONTROLS AT THE PY OPENING)
– 57 AN815–4K . UNION, 0.4375–20 AD ALT
– 58 2541865 . FILTER ASSY, UNION (UW 23007850, 23030617 & AD 1
23007851 FUEL CONTROLS AT THE PY OPENING)
(UW FUEL CONTROLS AT THE PY OPENING)
61 AN815–5J . UNION, 0.500–20 AD 1
– 61 AN815–5K . UNION, 0.500–20 AD ALT
62 AN804J5 . TEE, BULKHEAD AD 1
– 62 AN804K5 . TEE, BULKHEAD AD ALT
63 AN924–5J . NUT, 0.500–20 AD 1
– 63 AN924–5K . NUT, 0.500–20 AD ALT
64 MS9020–05 . PACKING, 0.414 IN. (10.516 MM) ID. AD 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 12
NOV 15/99
UNITS
1234567 CODE ASSY
– 65 6898867 . GOVERNOR ASSY, FUEL, POWER TURBINE AD 1

(V9X173 P/N 2524692–2)
(R&R 6898892, PER 250 CEB 73–3001)
(REF 250 CEB 73–3012)
(V9X173 P/N 2524692–4)
(R&R 23006268, PER 250 CEB 73–3012)
(V9X173 P/N 2524692–5)
(R&R 23007862, PER 250 CEB 73–3022)
(V9X173 P/N 2524692–7)
(R&R 23007874, PER 250 CEB 73–3024)
R – 65 23007874 . GOVERNOR ASSY, FUEL, POWER TURBINE AD 1
(V9X173 P/N 2524692–8)
(R&R 23004836, PER 250 CEB 73–3017)
(R&R 23070101, PER 250 CEB 73–3084)
R – 65 23004836 . GOVERNOR ASSY, FUEL, POWER TURBINE AD 1
(V9X173 P/N 2524692–9)
(R&R 23057873, PER 250 CEB 73–3070)
(R&R 23070106, PER 250 CEB 73–3084)
(V9X173 P/N 2524692–10) (REF PUB. 14W3,
CHAPTER 73–20–02, FOR DETAILS)
(R&R 23065125, PER 250 CEB 73–3084)
65 23065125 . GOVERNOR ASSY, FUEL, POWER TURBINE AD 1
(V9X173 P/N 2524692–11)
– 65 23070101 . GOVERNOR ASSY, FUEL, POWER TURBINE AD AR
(V9X173 P/N 2524692–11)
– 65 23070106 . GOVERNOR ASSY, FUEL, POWER TURBINE AD AR
(V9X173 P/N 2524692–11)
– ATTACHING PARTS
66 MS21043–4 . NUT, 0.250–28 AD 3

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 13
NOV 15/99
,FIG-ITEM UNITS
PART NUMBER NOMENCLATURE EFFECT PER
1234567 CODE ASSY
–––*–––
– 68 AN833–4J . ELBOW, 0.4375–20 (UIA 6898867) AD 1
(REF 250 CEB 73–3001)
– 68 AN833–4K . ELBOW, 0.4375–20 AD ALT
– 69 AN924–4J . NUT, 0.4375–20 (UIA 6898867) (REF 250 CEB 73–3001) AD 1
– 69 AN924–4K . NUT, 0.4375–20 (UIA 6898867) AD ALT
– 70 AS3084–04 . PACKING, 0.351 IN. (8.915 MM) ID AD 1
(UIA 6898867) (REF 250 CEB 73–3001)
– 71 AN919–3J . REDUCER, 0.500–20 (UIA 6898867) AD 1
(REF 250 CEB 73–3001)
– 71 AN919–3K . REDUCER, 0.500–20 AD ALT
– 72 AS3084–05 . PACKING, 0.414 IN. (10.516 MM) ID AD 1
(UIA 6898867) (REF 250 CEB 73–3001)
73 AN815–4J . UNION, 0.4375–20 (UW 6898867 AD 1
6898892, 23006268, 23007874, 23007862 &
23004836 GOVERNORS AT THE PY OPENING)
– 73 AN815–4K . UNION, 0.4375–20 AD ALT
75 AN929–5J . CAP ASSY, 0.500–20 AD 1
– 75 AN929–5K . CAP ASSY, 0.500–20 AD ALT
76 AN929–4J . CAP ASSY, 0.4375–20 AD 1
– 76 AN929–4K . CAP ASSY, 0.4375–20 AD ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 14
NOV 15/99
73-20-00
FIGURE 1
PAGE 15
NOV 15/99
FUEL CONTROL, GOVERNOR & Pc FILTER (250–C30P)

73-20-00
FIGURE 2
PAGE 0
SEP 1/98

73-20-00
FIGURE 2
PAGE 1
SEP 1/98

73-20-00
FIGURE 2
PAGE 2
SEP 1/98

73-20-00
FIGURE 2
PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
2 FUEL CONTROL, GOVERNOR & Pc FILTER (250–C30P)

1 6890579 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS B 1
(SB 23064624, PER CEB 250 73–3080)
– 1 23064624 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS B 1
(UIA 23004531)
(UIA 23062066) (FRO 23060425)
(UIA 23062066)
2 6890580 . TUBE ASSY, FUEL CONTROL TO FIRESHIELD B 1
3 6890581 . TUBE ASSY, FUEL CONTROL TO ACCUMULATOR B 1
4 6890578 . TUBE ASSY, FUEL CONTROL TO PUMP B 1
– 5 6899233 . TUBE ASSY, SCROLL TO Pc FILTER (FRO 23005667) B 1
R – 5 23005667 . TUBE ASSY, SCROLL TO Pc FILTER B 1
(SB 23065814, PER 250 CEB 72–3232)
R 5 23065814 . TUBE ASSY, SCROLL TO Pc FILTER B 1
(REF 250 CEB 72–3232)
6 23001986 . TUBE ASSY, Pc FILTER TO GOVERNOR B 1
7 MS21043–3 . NUT, 0.190–32 B 1
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
–––*–––
10 6875726 . FILTER ASSY, Pc B 1
(R&R 23033400, PER CEB A–75–3017)
– 10 6874958 . FILTER ASSY, Pc (FRO 23033422) B ALT
(REF CEB A–75–3017)
– 10 23033400 . FILTER ASSY, Pc B 1
– 10 23033422 . FILTER ASSY, Pc B ALT
R 10 A MS9193–04 . NIPPLE, TUBE, 0.4375–20 (REF 250 CEB 72–3232) B 1
R 10 B AS3208–04 . PACKING, 0.351 IN. (8.92 MM) ID B 1
(REF 250 CEB 72–3232)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
NOV 15/99
UNITS
1234567 CODE ASSY
11 AN101008 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) B 1
– 11 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) B ALT
13 23004224 . BRACKET, Pc FILTER B 1
– 14 MS21056–3W . . NUT, 0.190–32 B 1
– 14 MS21053–3W . . NUT, 0.190–32 B ALT
– 14 NAS1027–C3W . . NUT, 0.190–32 B ALT
–––*–––
14 A 11–971 . . ELEMENT ASSY (V14818) (UIA 6875726 & 23033400) B 1
– 14 A 400621 . . ELEMENT ASSY (V05160) (UIA 6874958 & 23003422 B ALT
14 B 1006–53 . . SEAL (V14818) (UIA 6875726) B 1
– 14 B AS3085–122 . . PACKING, 1.112 IN. (28.245 MM) ID (UIA 6875726) B ALT
– 14 B M83248/1–122 . . PACKING, 1.112 IN. (28.245 MM) ID B ALT
– 14 B 6896804 . . SEAL, O–RING (UIA 6874958) B ALT
14 C 1004–147 . . HOUSING ASSY (V14818) (UIA 6875726) B 1
– 14 C 6891966 . . HOUSING ASSY (UIA 6874958) B ALT
– 14 C 23034711 . . HOUSING ASSY (V14818) B AR
(REF CEB A–75–3017)
– 15 23005204 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, B 1
NO. 4 X 17.75 IN. (450.85 MM) (UIA 23004531)
15 23056649 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, B 1
NO. 4 X 17.75 IN. (450.85 MM) (UIA 23062066)
16 AN832–4J . UNION, 0.4375–20 B 1
– 16 AN832–4K . UNION, 0.4375–20 B ALT
17 AN924–4J . NUT, 0.4375–20 B 1
– 17 AN924–4K . NUT, 0.4375–20 B ALT
18 AN960–716 . WASHER, 0.4375 IN. (11.112 MM) ID B 2
– 19 6891634 . TUBE ASSY, FUEL CONTROL TO PY TEE B 1
(DISC., PER 250 CEB 73–3047)
20 6890584 . TUBE ASSY, ACCUMULATOR TO GOVERNOR B 1
21 6893073 . TUBE ASSY, CONTROL TO Pc TEE B 1
22 MS21043–3 . NUT, 0.190–32 B 1
23 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
UNITS
1234567 CODE ASSY
25 6890583 . TUBE ASSY, FUEL CONTROL TO GOV B 1

26 6890586 . TUBE ASSY, GOVERNOR TO PY TEE B 1
(DISC., PER 250 CEB 73–3047)
26 A 23039785 . TUBE ASSY, PY AIR, FUEL CONTROL TO PT GOV B 1
(ADDED, PER 250 CEB 73–3047)
27 AN804J4 . TEE, 0.438–20 (DISC., PER 250–CEB 73–3047) B 1
– 27 AN804K4 . TEE, 0.438–20 (DISC., PER 250–CEB 73–3047) B ALT
28 AN924–4J . NUT, 0.438–20 (DISC., PER 250–CEB 73–3047) B 1
– 28 AN924–4K . NUT, 0.438–20 (DISC., PER 250–CEB 73–3047) B ALT
(DISC., PER 250 CEB 73–3047)
30 FIG. REF . VALVE ASSY, N2 OVERSPEED SOLENOID, N/C B REF
(REF 73–20–00, FIG. 7, FOR DETAIL PARTS)
(DISC., PER 250 CEB 73–3047)
31 MS21043–3 . NUT, 0.190–32 (DISC., PER 250–CEB 73–3047) B 2
32 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.10 MM) B 2
(DISC., PER 250 CEB 73–3047)
–––*–––
33 AN815–4J . UNION, 0.4375–20 B 3
– 33 AN815–4K . UNION, 0.4375–20 B ALT
35 D4 . ELBOW, 0.4375–20 B 1

36 23004537 . CONTROL ASSY, FUEL, GAS PRODUCER B ALT

(V9X173 P/N 2524854–1) (REF 250 CEB 73–3019)
(R&R 23007896, PER 250 CEB 73–3027)
(R&R 23007851, PER 250 CEB 73–3022)
– 36 23007896 . CONTROL ASSY, FUEL, GAS PRODUCER B 1
(V9X173 P/N 2524854–1M)
(R&R 23007897, PER CEB 73–3022)
– 36 23007851 . CONTROL ASSY, FUEL, GAS PRODUCER B ALT
(V9X173 P/N 2524854–3)
(R&R 23007897, PER 250 CEB 73–3027)
(V9X173 P/N 2524854–3M)
(R&R 23007502, PER 250 CEB 73–3024)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
UNITS
1234567 CODE ASSY


(V9X173 P/N 2524854–4)
(R&R 23034049, PER 250 CEB 73–3028)
(R&R 23033848, PER CEB 73–3029)
(V9X173 P/N 2524854–6)
(V9X173 P/N 2549012–1) (FRO 23038956)
(V9X173 P/N 2549001–1)
(R&R 23034700, PER 250 CEB 73–3030)
(V9X173 P/N 2549001–2)
(V9X173 P/N 2524944–1)
(R&R 23009171, PER 250 CEB 73–3022)
(V9X173 P/N 2524944–2) (REF 250 CEB 73–3022)
(V9X173 P/N 2524944–3)
(R&R 23030642, PER 250 CEB 73–3028)
(R&R 23033847, PER 250 CEB 73–3029)
(R&R 23034045, PER 250 CEB 73–3030)
(V9X173 P/N 2524944–4)
(R&R 23034700, PER 250 CEB 73–3029)
(V9X173 P/N 2524944–5) (FRO 23038956)
(V9X173 P/N 2524944–6) (FRO 23038956)
(V9X173 P/N 2524922–4)
(R&R 23034046, PER 250 CEB 73–3030)
(V9X173 P/N 2524922–5) (REF PUB. 14W3,
(R&R 23033849, PER 250 CEB 73–3029)
(V9X173 P/N 2524922–6)
(R&R 23038956, PER 250 CEB 73–3039)
(V9X173 P/N 2524922–7) (FRO 23056926)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 1/00
UNITS
1234567 CODE ASSY

(V9X173 P/N 2524922–8)
(R&R 23057333, PER 250 73–3061)
– 36 23033848 . CONTROL ASSY, FUEL, GAS PRODUCER B AR
(V9X173 P/N 2524854–6)
(V9X173 P/N 2524922–9)
(R&R 23052286, PER 250 CEB 73–3063)
(V9X173 P/N 2549092–1) (FRO 23059790)
(V9X173 P/N 2549092–2)
(R&R 23059933, PER 250 CEB A–73–3068)
(V9X173 P/N 2549092–3) (FRO 23065147)
(R&R 23065116, PER CEB 73–3083)
(REF 250 CEB 73–3098)
R – 36 23065147 . CONTROL ASSY, FUEL, GAS PRODUCER B 1
(V9X173 P/N 2549092–5)
(SB 23070613, PER 250 CEB 73–3106)
R 36 23070613 . CONTROL ASSY, FUEL, GAS PRODUCER B 1
(V9X173 P/N 2549092–6) (REF 250 CEB 73–3106)
(V9X173 P/N 2524944–7)
(R&R 23057332, PER 250 CEB 73–3061)
(V9X173 P/N 2524944–8)
(V9X173 P/N 2524944–10)
(REF 250 CEB A–73–3068, 73–3098)
(V9X173 P/N 2549092–4)
(R&R 23065147, PER 250 CEB 73–3085)
(V9X173 P/N 2524944–11)
(R&R 23065146, PER 250 CEB 73–3085)
(V9X173 P/N 2524944–12)
(SB 23065147)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 8
DEC 15/01
UNITS
1234567 CODE ASSY
37 MS21043–4 . NUT, 0.250–28 B 3
–––*–––
39 557S6 . . PACKING (V9X173) (REF 250 CEB 73–3013) B 1
39 A 951395 . . PACKING (V9X173) B 1
39 B 951394 . . PACKING (V9X173) B 1
39 C 953515–4 . . PACKING (V9X173) B 1
39 D 953508–8 . . PACKING (V9X173) B 2
39 E 2537533–10 . . SHIM, 0.010 IN. (0.25 MM) THICK (V9X173) B 2
39 F 2538801 . . ADAPTER, COUPLING (V9X173) B 1
40 6805372 . GASKET, 1.500 IN. (38.1 MM) DIA, 3–BOLT FLANGE B 1
(SB 23053993)
– 40 23053993 . GASKET, 1.500 IN. (38.1 MM) DIA, 3–BOLT FLANGE B 1
41 AN833–4J . ELBOW, 0.4375–20 B 1
– 41 AN833–4K . ELBOW, 0.4375–20 B ALT
42 AN924–4J . NUT, 0.4375–20 B 1
– 42 AN924–4K . NUT, 0.4375–20 B ALT
– 44 AN815–4J . UNION, 0.4375–20 B 1
– 44 AN815–4K . UNION, 0.4375–20 B ALT
44 A AN815–4J . UNION, 0.4375–20 (UW 23004537, B 1
23007896, 23007502, 23009170, 23009171,
23009172, 23030642, 23034045 & 23034046
FUEL CONTROLS AT THE PY OPENING)
– 44 A AN815–4K . UNION, 0.4375–20 B ALT
– 44 B 2541865 . FILTER ASSY, UNION (UW 23007851 B 1
– 45 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) B 1
45 A AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID B 1
(UW 23004537, 23007896, 23007502, 23009170,
23009171, 23009172, 23030642, 23034045 &
– 45 B AS3084–04 . PACKING, 0.351 IN. (8.915 MM) ID B 1
(UW 23007851 & 23007897 FUEL
CONTROLS AT THE PY OPENING)
46 AN815–5J . UNION, 0.500–20 B 2
– 46 AN815–5K . UNION, 0.500–20 B ALT
47 MS9020–05 . PACKING, 0.414 IN. (10.516 MM) ID B 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 9
NOV 15/99
UNITS
1234567 CODE ASSY
– 48 6898867 . GOVERNOR ASSY, FUEL, POWER TURBINE B 1

(V9X173 P/N 2524692–2)
(R&R 6898892, PER 250 CEB 73–3001)
(REF 250 CEB 73–3012)
(V9X173 P/N 2524692–4)
(R&R 23006268, PER 250 CEB 73–3012)
(V9X173 P/N 2524692–5)
(R&R 23007862, PER 250 CEB 73–3022)
(V9X173 P/N 2524692–7)
(R&R 23007874, PER 250 CEB 73–3024)
R – 48 23007874 . GOVERNOR ASSY, FUEL, POWER TURBINE B 1
(V9X173 P/N 2524692–8)
(R&R 23004836, PER 250 CEB 73–3017)
(R&R 23070101, PER 250 CEB 73–3084)
R – 48 23004836 . GOVERNOR ASSY, FUEL, POWER TURBINE B 1
(V9X173 P/N 2524692–9)
(R&R 23057873, PER 250 CEB A–73–3070)
(R&R 23070106, PER 250 CEB 73–3084)
(V9X173 P/N 2524692–10) (REF PUB. 14W3,
(R&R 23065125, PER 250 CEB 73–3084)
48 23065125 . GOVERNOR ASSY, FUEL, POWER TURBINE B 1
(V9X173 P/N 2524692–11)
48 23070101 . GOVERNOR ASSY, FUEL, POWER TURBINE B AR
(V9X173 P/N 2524692–11)
48 23070106 . GOVERNOR ASSY, FUEL, POWER TURBINE B AR
(V9X173 P/N 2524692–11)
49 MS21043–4 . NUT, 0.250–28 B 3
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 10
NOV 15/99
UNITS
1234567 CODE ASSY
51 AN815–4J . UNION, 0.4375–20 (UW 6898892, 23006268, B 1

23007874, 23007862 & 23004836
GOVERNORS AT THE PY OPENING)
– 51 AN815–4K . UNION, 0.4375–20 B ALT
53 AN929–4J . CAP ASSY, 0.4375–20 B 1
– 53 AN929–4K . CAP ASSY, 0.4375–20 B ALT
– 54 FIG. REF KIT, ELECTRONIC N2 OVERSPEED B REF
CONTROL SYSTEM INSTALLATION
(REF TO KITS SECTION FOR DETAIL PARTS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 11
NOV 15/99
FUEL CONTROL HEATER KIT (250–C30P)

73-20-00
FIGURE 3
PAGE 0
SEP 1/98
FUEL CONTROL HEATER KIT (250–C30P)

73-20-00
FIGURE 3
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
3 FUEL CONTROL HEATER KIT (250–C30P)

1 23058112 . TUBE ASSY, DUMMY IGNITER TO BULKHEAD FITTING B 1
2 FIG. REF . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE B REF
(REF 73–20–00, FIG. 2)
3 MS21043–3 . NUT, SLFLKG, 0.190–32 B 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
7 23058109 . BRACKET, 0.190 IN (4.83 MM) DIA X 0.438 IN. B 1
(11.13 MM) HOLES
–––*–––
8 23057782 . TUBE ASSY, SHUTOFF VALVE TO FUEL CONTROL B 1
PC HEATER
9 23060409 . TUBE ASSY, AIR, FUEL CONTROL HEATING B 1
10 FIG. REF . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS B REF
(REF 73–20–00, FIG. 2)
11 6875709 . VALVE ASSY, PLUG, SHUTOFF B 1
12 AN924–4J . NUT, 0.4375–20 B 2
– 12 AN924–4K . NUT, 0.4375–20 B ALT
13 AN960–716 . WASHER, 0.4375 IN. (11.11 MM) ID B 4
14 AN832–4J . UNION, 0.4375–20 B 2
– 14 AN832–4K . UNION, 0.4375–20 B ALT
15 AN815–4J . UNION, FLARED TUBE, 0.4375–20 B 1
– 15 AN815–4K . UNION, FLARED TUBE, 0.4375–20 B ALT
16 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) B 2
R 17 AN960C416L . WASHER, 0.250 IN.(6.35 MM) ID B 2
(INSTALL ONTO LOWER F/C ATTACHING STUDS)
(S P/N MS9320–10) (REF 250 CEB 73–3082)
R 18 MS21043–4 . NUT, SLFLKG, 0.250–28 B 2
(REF 250 CEB 73–3082)

A 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
73-20-00
FIGURE 3
PAGE 3
SEP 1/98
FUEL CONTROL, GOVERNOR & Pc FILTER (250–C30M)

73-20-00
FIGURE 4
PAGE 0
SEP 1/98

73-20-00
FIGURE 4
PAGE 1
SEP 1/98

73-20-00
FIGURE 4
PAGE 2
SEP 1/98

73-20-00
FIGURE 4
PAGE 3
SEP 1/98

73-20-00
FIGURE 4
PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30M)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 6) C REF

1 23001826 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS C 1
2 6890580 . TUBE ASSY, FUEL CONTROL TO FIRESHIELD C 1
3 6899208 . TUBE ASSY, FUEL CONTROL TO ACCUMULATOR C 1
4 6890578 . TUBE ASSY, FUEL CONTROL TO PUMP C 1
R – 5 6899233 . TUBE ASSY, SCROLL TO Pc FILTER C 1
(SB 23065813, PER 250 CEB 72–3232)
R 5 23065813 . TUBE ASSY, Pc SCROLL TO Pc FILTER C 1
(REF 250 CEB 72–3232)
6 23001986 . TUBE ASSY, Pc FILTER TO GOVERNOR C 1
7 MS21043–3 . NUT, 0.190–32 C 1
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
–––*–––
10 6875726 . FILTER ASSY, Pc C 1
(R&R 23033400, PER CEB A–75–3017)
– 10 6874958 . FILTER ASSY, Pc (FRO 23033422) C ALT
(REF CEB A–75–3017)
– 10 23033400 . FILTER ASSY, Pc C 1
– 10 23033422 . FILTER ASSY, Pc C ALT
R 10 A MS9193–04 . NIPPLE, TUBE, 0.4375–20 (REF 250 CEB 72–3232) C 1
R 10 B AS3208–04 . PACKING, 0.351 IN. (8.92 MM) ID C 1
(REF 250 CEB 72–3232)
11 AN101008 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) C 1
– 11 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) C ALT
13 23004224 . BRACKET, Pc FILTER C 1
– 14 MS21056–3W . . NUT, 0.190–32 C 1
– 14 MS21043–3W . . NUT, 0.190–32 C ALT
– 14 NAS1027–C3W . . NUT, 0.190–32 C ALT
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
NOV 15/99
UNITS
1234567 CODE ASSY
14 A 11–971 . . ELEMENT ASSY (V14818) (UIA 6875726 & 23033400) C 1

– 14 A 400621 . . ELEMENT ASSY (V05160) (UIA 6874958 & 23033422) C ALT
14 B 1006–53 . . SEAL (V14818) (UIA 6875726 & 23033400) C 1
– 14 B AS3085–122 . . PACKING, 1.112 IN. (28.245 MM) ID (UIA 6875726) C ALT
– 14 B M83248/1–122 . . PACKING, 1.112 IN. (28.245 MM) ID C ALT
– 14 B 6896804 . . SEAL, O–RING (UIA 6874958 & 2303422) C ALT
14 C 1004–147 . . HOUSING ASSY (V14818) (UIA 6875726 & 23033400) C 1
– 14 C 6891966 . . HOUSING ASSY (UIA 6874958 & 2303422) C ALT
– 14 C 23034711 . . HOUSING ASSY (V14818) C AR
15 23005204 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, C 1
NO. 4 X 17.75 IN. (450.85 MM)
16 AN832–4J . UNION, 0.4375–20 C 1
– 16 AN832–4K . UNION, 0.4375–20 C ALT
17 AN924–4J . NUT, 0.4375–20 C 1
– 17 AN924–4K . NUT, 0.4375–20 C ALT
18 AN960–716 . WASHER, 0.4375 IN. (11.112 MM) ID C 2
19 6891634 . TUBE ASSY, FUEL CONTROL TO PY TEE C 1
(DISC., PER 250 CEB 73–3047)
20 6890584 . TUBE ASSY, ACCUMULATOR TO GOVERNOR C 1
(DISC.) (SB 6886430E070A) (REF 250 CEB 73–3064)
21 6886430E070A . HOSE ASSY (REF 250 CEB 73–3064) C 1
22 MS21043–3 . NUT, 0.190–32 (REF 250 CEB 73–3064) C 3
23 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 2
(REF 250 CEB 73–3064)
24 AN101025 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) C 1
(REF 250 CEB 73–3064)
25 6871076–4 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. C 5
(5.23 X 11.13 X 0.35 MM) (REF 250 CEB 73–3064)
– 25 6823260 . SPACER, 0.206 ID X 0.438 OD X 0.250 IN. C ALT
(5.23 X 11.13 X 6.35 MM) (REF 250 CEB 73–3064)
(REF 250 CEB 73–3064)
27 MS9395–04 . BACKPLATE, RETAINING STRAP C 1
(REF 250 CEB 73–3064)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
UNITS
1234567 CODE ASSY
28 AN821–4J . ELBOW, 90° (REF 250 CEB 73–3064) C 1

– 28 AN821–4K . ELBOW, 90° (REF 250 CEB 73–3064) C ALT
29 6893073 . TUBE ASSY, CONTROL TO Pc TEE C 1
30 MS21043–3 . NUT, 0.190–32 (DISC.) C 1
31 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) (DISC.) C 1
32 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID (DISC.) C 2
32 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID (DISC.) C 2
32 6864061–08 . BUSHING, SPLIT, 0.250 IN. (6.35 MM) ID (DISC.) C 2
–––*–––
33 6890583 . TUBE ASSY, FUEL CONTROL TO GOVERNOR C 1
34 6890586 . TUBE ASSY, GOVERNOR TO PY TEE C 1
(DISC., PER 250 CEB 73–3047)
35 23039785 . TUBE ASSY, PY AIR, FUEL CONTROL TO PT GOV C 1
(ADDED, PER 250 CEB 73–3047)
36 AN804–4J . TEE, 0.438–20 (DISC., PER 250 CEB 73–3047) C 1
– 36 AN804–4K . TEE, 0.438–20 (DISC., PER 250 CEB 73–3047) C ALT
37 AN924–4J . NUT, 0.438–20 (DISC., PER 250 CEB 73–3047) C 1
– 37 AN924–4K . NUT, 0.438–20 (DISC., PER 250 CEB 73–3047) C ALT
(DISC., PER 250 CEB 73–3047)
39 FIG. REF . VALVE ASSY, N2 OVERSPEED SOLENOID, NORMALLY C REF
CLOSED (DISC., PER 250 CEB 73–3047)
40 MS21043–3 . NUT, 0.190–32 (DISC., PER 250 CEB 73–3047) C 2
41 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) C 2
(DISC., PER 250 CEB 73–3047)
–––*–––
42 AN815–4J . UNION, 0.4375–20 (DISC.) (REF 250 CEB 73–3064) C 3
– 42 AN815–4K . UNION, 0.4375–20 (DISC.) (REF 250 CEB 73–3064) C ALT
43 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID (DISC.) C 4
(REF 250 CEB 73–3064)
44 AN939D4 . ELBOW, 0.4375–20 (DISC.) (REF 250 CEB 73–3064) C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 15/99
UNITS
1234567 CODE ASSY

– 45 23001798 . CONTROL ASSY, FUEL, GAS PRODUCER C ALT

(V9X173 P/N 2524745–17)
(R&R 23007508, PER 250 CEB 73–3027)
(R&R 23007850, PER 250 CEB 73–3022)
(REF 250 CEB 73–3019)
– 45 23007850 . CONTROL ASSY, FUEL, GAS PRODUCER C 1
(V9X173 P/N 2524745–19)
(R&R 23030617, PER CEB 73–3027)
(V9X173 P/N 2524745–19 L.I.(–17)
(R&R 23030638, PER 250 CEB 73–3027)
(V9X173 P/N 2524745–19–M)
(R&R 23007501, PER 250 CEB 73–3024)
(V9X173 P/N 2524745–19–M L.I.(–17)
(R&R 23030639, PER CEB 73–3024)
(V9X173 P/N 2524745–20)
(R&R 23034047, PER 250 CEB 73–3028)
(R&R 23033846, PER 250 CEB 73–3029)
(V9X173 P/N 2524745–20 (L.I.–17)
(R&R 23034048, PER CEB 73–3028)
(V9X173 P/N 2524854–1) (REF 250 CEB 73–3019)
(R&R 23007896, PER 250 CEB 73–3027)
(R&R 23007851, PER 250 CEB 73–3022)
(V9X173 P/N 2524854–1M)
(R&R 23007897, PER CEB 73–3022)
(V9X173 P/N 2524854–3)
(R&R 23007897, PER 250 CEB 73–3027)
(V9X173 P/N 2524854–3M)
(R&R 23007502, PER 250 CEB 73–3024)
(V9X173 P/N 2524854–4)
(R&R 23034049, PER 250 CEB 73–3028)
(R&R 23033848, PER CEB 73–3029)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 8
NOV 15/99
UNITS
1234567 CODE ASSY

(V9X173 P/N 2524944–1)
(R&R 23009171, PER 250 CEB 73–3022)
(V9X173 P/N 2524944–2)
(REF 250 CEB 73–3022)
(V9X173 P/N 2524944–3)
(R&R 23030642, PER 250 CEB 73–3028)
(R&R 23033847, PER 250 CEB 73–3029)
(R&R 23034045, PER 250 CEB 73–3030)
(V9X173 P/N 2524745–19 L.I.(–17)
(R&R 23030638, PER 250 CEB 73–3027)
(V9X173 P/N 2524944–4)
(V9X173 P/N 2524944–5) (FRO 23038956)
(V9X173 P/N 2524944–6 (FRO 23038956)
(V9X173 P/N 2524922–4)
(R&R 23034046, PER 250 CEB 73–3030)
(V9X173 P/N 2524922–5)
(R&R 23033849, PER 250 CEB 73–3029)
(V9X173 P/N 2524922–6)
(R&R 23038956, PER 250 CEB 73–3039)
(V9X173 P/N 2524922–7) (FRO 23056926)
(V9X173 P/N 2524922–8)
(R&R 23057333, PER 250 CEB 73–3061)
– 45 23052280 . CONTROL ASSY, FUEL, GAS PRODUCER C AR
(V9X173 P/N 2524854–7)
(V9X173 P/N 2524922–9)
(R&R 23052286, PER 250 CEB 73–3063)
(V9X173 P/N 2549092–1) (FRO 23059790)
(V9X173 P/N 2549092–2)
(R&R 23059933, PER 250 CEB A–73–3068)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 9
NOV 1/00
UNITS
1234567 CODE ASSY

(V9X173 P/N 2549092–3) (FRO 23065147)
(R&R 23065116, PER 250 CEB 73–3083)
(REF 250 CEB 73–3098)
R – 45 23065147 . CONTROL ASSY, FUEL, GAS PRODUCER C 1
(V9X173 P/N 2549092–5)
(SB 23070613, PER 250 CEB 73–3106)
R 45 23070613 . CONTROL ASSY, FUEL, GAS PRODUCER C 1
(V9X173 P/N 2549092–6) (REF 250 CEB 73–3106)
(V9X173 P/N 2524944–8)
(V9X173 P/N 2524944–7)
(R&R 23057332, PER 250 CEB 73–3061)
(V9X173 P/N 2524944–10)
(FOR SERV USE & SPARE PARTS PROC) (DISC.)
(REF 250 CEB A–73–3068, 73–3098)
(V9X173 P/N 2524944–11)
(R&R 23065146, PER 250 CEB 73–3085)
(V9X173 P/N 2524944–12)
(SB 23065147)
(V9X173 P/N 2549092–4)
(R&R 23065147, PER 250 CEB 73–3085)
46 MS21043–4 . NUT, 0.250–28 C 3
–––*–––
48 557S6 . . PACKING (V9X173) (REF 250 CEB 73–3013) C 1
48 A 951395 . . PACKING (V9X173) C 1
48 B 951394 . . PACKING (V9X173) C 1
48 C 953515–4 . . PACKING (V9X173) C 1
48 D 953508–8 . . PACKING (V9X173) C 2
48 E 2537533–10 . . SHIM, 0.010 IN. (0.25 MM) THICK (V9X173) C 2
48 F 2538801 . . ADAPTER, COUPLING (V9X173) C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 10
DEC 15/01
UNITS
1234567 CODE ASSY
49 6805372 . GASKET, 1.500 IN. (38.1 MM) DIA X C 1

3–BOLT FLANGE (SB 23053993)
– 49 23053993 . GASKET, 1.500 IN. (38.1 MM) DIA X 3–BOLT FLANGE C 1
50 AN833–4J . ELBOW, 0.4375–20 C 1
– 50 AN833–4K . ELBOW, 0.4375–20 C ALT
51 AN924–4J . NUT, 0.4375–20 C 1
– 51 AN924–4K . NUT, 0.4375–20 C ALT
53 AN815–4J . UNION, 0.4375–20 C 1
– 53 AN815–4K . UNION, 0.4375–20 C ALT
55 AN815–5J . UNION, 0.500–20 C 1
– 55 AN815–5K . UNION, 0.500–20 C ALT
56 AN804J5 . TEE, BULKHEAD C 1
– 56 AN804K5 . TEE, BULKHEAD C ALT
57 AN924–5J . NUT, 0.500–20 C 1
– 57 AN924–5K . NUT, 0.500–20 C ALT
58 MS9020–05 . PACKING, 0.414 IN. (10.516 MM) ID C 1
59 23005228 . GOVERNOR ASSY, FUEL, POWER TURBINE C 1
(V9X173 P/N 2524883–1) (SEE PUB. 14W3,
(R&R 23006269, PER 250 CEB 73–3012)
– 59 23006269 . GOVERNOR ASSY, FUEL, POWER TURBINE C 1
(V9X173 P/N 2524883–2) (SEE PUB. 14W3,
(R&R 23007863, PER 250 CEB 73–3022)
(V9X173 P/N 2524883–4) (SEE PUB. 14W3,
(R&R 23007875, PER 250 CEB 73–3024)
R – 59 23007875 . GOVERNOR ASSY, FUEL, POWER TURBINE C 1
(V9X173 P/N 2524883–5) (SEE PUB. 14W3,
(R&R 23004837, PER 250 CEB 73–3017)
(R&R 23070102, PER 250 CEB 73–3084)
R – 59 23004837 . GOVERNOR ASSY, FUEL, POWER TURBINE C 1
(V9X173 P/N 2524883–6)
(R&R 23057874, PER 250 CEB A–73–3070)
(R&R 23070107, PER 250 CEB 73–3084)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 11
NOV 15/99
UNITS
1234567 CODE ASSY

(V9X173 P/N 2524883–7) (REF PUB. 14W3,
(R&R 23065126, PER 250 CEB 73–3084)
59 23065126 . GOVERNOR ASSY, FUEL, POWER TURBINE C 1
(V9X173 P/N 2524883–8)
– 59 23070102 . GOVERNOR ASSY, FUEL, POWER TURBINE C AR
(V9X173 P/N 2524883–8)
– 59 23070107 . GOVERNOR ASSY, FUEL, POWER TURBINE C AR
(V9X173 P/N 2524883–8)
60 MS21043–4 . NUT, 0.250–28 C 3
–––*–––
62 AN815–4J . UNION, 0.4375–20 C 1
(UW 23005258, 23006269, 23007875, 23007863
& 23004837 GOVERNORS AT THE PY OPENING)
– 62 AN815–4K . UNION, 0.4375–20 C ALT
64 AN929–5J . CAP ASSY, 0.500–20 C 1
– 64 AN929–5K . CAP ASSY, 0.500–20 C ALT
65 AN929–4J . CAP ASSY, 0.4375–20 C 1
– 65 AN929–4K . CAP ASSY, 0.4375–20 C ALT
– 66 FIG. REF KIT, ELECTRONIC N2 OVERSPEED CONTROL C REF
SYSTEM INSTALLATION
(REF KITS FOR DETAIL PARTS)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 12
NOV 15/99
73-20-00
FIGURE 4
PAGE 13
NOV 15/99
FUEL CONTROL, GOVERNOR & Pc FILTER (250–C30G, C30G/2)

73-20-00
FIGURE 5
PAGE 0
SEP 1/98

73-20-00
FIGURE 5
PAGE 1
NOV 15/99

73-20-00
FIGURE 5
PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30G, C30G/2)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) EF REF

1 23001826 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS EF 1
2 6890580 . TUBE ASSY, FUEL CONTROL TO FIRESHIELD EF 1
3 6890578 . TUBE ASSY, FUEL CONTROL TO PUMP EF 1
R – 4 6899249 . TUBE ASSY, SCROLL TO Pc FILTER EF 1
(SB 23065569, PER 250 CEB 72–3232)
R 4 23065569 . TUBE ASSY, Pc SCROLL TO Pc FILTER EF 1
(UW 23066737 COMPR SCROLL ASSY,
REF 250 CEB 72–3232)
R 4 A MS9193–04 . NIPPLE, TUBE, 0.4375–20 (UW 23065569) EF 1
R 4 B AS3208–04 . PACKING, 0.351 IN. (8.92 MM) ID (UW 23065569) EF 1
5 MS21043–3 . NUT, 0.190–32 EF 2
6 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) EF 2
7 23039030–03 . CLAMP, CUSHIONED, 0.250 IN. (6.35 MM) ID EF 1
8 MS9593–052 . BRACKET, ANGLE, 90° EF 1
–––*–––
9 23033885 . TUBE ASSY, Pc FILTER TO GOVERNOR EF 1
10 MS21043–3 . NUT, 0.190–32 EF 1
11 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) EF 1
–––*–––
13 23033400 . FILTER ASSY, Pc EF 1
– 13 23033422 . FILTER ASSY, Pc EF ALT
–––*–––
15 11–971 . . ELEMENT ASSY (V14818) (UIA 23033400) EF 1
– 15 400621 . . ELEMENT ASSY (V05160) (UIA 23033422) EF ALT
16 MS83248/1–122 . . PACKING, 1.112 IN. (28.245 MM) ID (UIA 23033400) EF 1
17 1004–147 . . HOUSING ASSY (V14818) (UIA 6875726) EF 1
– 17 6891966 . . HOUSING ASSY (UIA 6874958) EF ALT
– 17 23034711 . . HOUSING ASSY (V14818) EF AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
18 23005204 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, F 1

NO. 4 X 17.875 IN. (454.03 MM)
19 23056649 . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, F 1
NO. 4 X 17.875 IN. (454.03 MM)
20 MS21043–3 . NUT, 0.190–32 F 1
21 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) F 1
(25.4, 4.83 X 11.11 MM) HOLES
23 6854056 . BRACKET, FLAT, 100 IN., 0.190 X 0.4375 IN. DIA F 1
–––*–––
24 AN832–4J . UNION, 0.4375–20 EF 1
– 24 AN832–4K . UNION, 0.4375–20 EF ALT
25 AN924–4J . NUT, 0.4375–20 EF 1
– 25 AN924–4K . NUT, 0.4375–20 EF ALT
26 AN960–716 . WASHER, 0.4375 IN. (11.112 MM) ID EF 2
27 6891634 . TUBE ASSY, FUEL CONTROL TO PY TEE EF 1
28 6890586 . TUBE ASSY, SOLENOID VALVE TEE TO GOVERNOR EF 1
29 AN804–4J . TEE, 0.4375–20 EF 1
– 29 AN804–4K . TEE, 0.4375–20 EF ALT
30 AN924–4J . NUT, 0.4375–20 EF 1
– 30 AN924–4K . NUT, 0.4375–20 EF ALT
31 AS3084–04 . PACKING, 0.351 IN. (8.915 MM) ID EF 1
32 FIG. REF . VALVE ASSY, N2 OVERSPEED SOLENOID, EF REF
NORMALLY CLOSED
(REF 73–20–00, FIG. 5 FOR DETAIL PARTS)
33 MS21043–3 . NUT, 0.190–32 EF 2
34 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) EF 2
35 6893073 . TUBE ASSY, CONTROL TO Pc TEE EF 1
36 6899208 . TUBE ASSY, FUEL CONTROL TO ACCUMULATOR EF 1
37 MS21043–3 . NUT, 0.190–32 EF 1
38 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) EF 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
40 23051146 . TUBE ASSY, FUEL CONTROL TO GOVERNOR EF 1

– 41 23038956 . CONTROL ASSY, FUEL, GAS PRODUCER EF 1
(V9X173 P/N 2524922–7) (FRO 23056926)
(V9X173 P/N 2524922–8)
(R&R 23057333, PER 250 CEB 72–4027)
(V9X173 P/N 2524922–9)
(R&R 23052286, PER 250 CEB 73–3063)
(V9X173 P/N 2549909–1) (FRO 23059790)
(V9X173 P/N 2549092–2)
(R&R 23059933, PER 250 CEB A–73–3068)
(V9X173 P/N 2549092–3) (FRO 23065147)
(R&R 23065116, PER 250 CEB A–73–3083)
(REF 250 CEB 73–3098)
R – 41 23065147 . CONTROL ASSY, FUEL, GAS PRODUCER EF 1
(V9X173 P/N 2549092–5)
(SB 23070613, PER 250 CEB 73–3106)
R 41 23070613 . CONTROL ASSY, FUEL, GAS PRODUCER EF 1
(V9X173 P/N 2549092–6) (REF 250 CEB 73–3106)
– 41 23065116 . CONTROL ASSY, FUEL, GAS PRODUCER EF AR
(V9X173 P/N 2549092–4)
(R&R 23065147, PER 250 CEB 73–3085)
42 MS21043–4 . NUT, 0.250–28 EF 3
43 MS9320–10 . WASHER, 0.250 IN. (6.35 MM) ID EF 3
–––*–––
44 951395 . . PACKING (V9X173) EF 1
45 951394 . . PACKING (V9X173) EF 1
46 953515–4 . . PACKING (V9X173) EF 1
47 953508–8 . . PACKING (V9X173) EF 2
48 2537533–10 . . SHIM, 0.010 IN. (0.25 MM) THICK (V9X173) EF 2
48 A 2538801 . . ADAPTER, COUPLING (V9X173) EF 1
49 23053993 . GASKET, 1.500 IN. (38.1 MM) DIA X 3–BOLT FLANGE. EF 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
UNITS
1234567 CODE ASSY
50 AN833–4J . ELBOW, 0.4375–20 EF 1

– 50 AN833–4K . ELBOW, 0.4375–20 EF ALT
51 AN924–4J . NUT, 0.4375–20 EF 1
– 51 AN924–4K . NUT, 0.4375–20 EF ALT
52 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID EF 1
53 AN815–4J . UNION, 0.4375–20 EF 1
– 53 AN815–4K . UNION, 0.4375–20 EF ALT
54 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) EF 1
55 AN815–5J . UNION, 0.500–20 EF 1
– 55 AN815–5K . UNION, 0.500–20 EF ALT
56 AN804J5 . TEE, BULKHEAD EF 1
– 56 AN804K5 . TEE, BULKHEAD EF ALT
57 AN924–5J . NUT, 0.500–20 EF 1
– 57 AN924–5K . NUT, 0.500–20 EF ALT
58 MS9020–05 . PACKING, 0.414 IN. (10.516 MM) ID EF 2
– 59 23004836 . GOVERNOR ASSY, FUEL, POWER TURBINE E 1
(V9X173 P/N 2524692–9)
(R&R 23051652, PER 250 CEB 73–3046)
(REF 250 CEB 73–3073)
(V9X173 P/N 2524827–3) (FRO 23052281)
(V9X173 P/N 2524827–4)
(R&R 23052282, PER 250 CEB 73–3057)
R – 59 23052282 . GOVERNOR ASSY, FUEL, POWER TURBINE E 1
(V9X173 P/N 2524827–5)
(R&R 23057875, PER 250 CEB A–73–3070)
(R&R 23070103, PER 250 CEB 73–3084)
(V9X173 P/N 2524827–6) (REF PUB. 14W3,
(R&R 23065127, PER 250 CEB 73–3084)
59 23065127 . GOVERNOR ASSY, FUEL, POWER TURBINE E 1
(V9X173 P/N 2524827–7)
– 59 23070103 . GOVERNOR ASSY, FUEL, POWER TURBINE E AR
(V9X173 P/N 2549068–7)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
NOV 15/99
UNITS
1234567 CODE ASSY
R 59 23051996 . GOVERNOR ASSY, FUEL, POWER TURBINE F 1

(V9X173 P/N 2549068–2)
(R&R 23057876, PER 250 CEB A–73–3070)
(REF 250 CEB 73–3073)
(R&R 23070104, PER 250 CEB 73–3084)
– 59 23057876 . GOVERNOR ASSY, FUEL, POWER TURBINE F 1
(V9X173 P/N 2549068–3) (REF PUB. 14W3,
(R&R 23065128, PER 250 CEB 73–3084)
– 59 23065128 . GOVERNOR ASSY, FUEL, POWER TURBINE F 1
(V9X173 P/N 2549068–4)
– 59 23070104 . GOVERNOR ASSY, FUEL, POWER TURBINE F AR
(V9X173 P/N 2549068–4)
60 MS21043–4 . NUT, 0.250–28 EF 3
61 MS9320–10 . WASHER, 0.250 IN. (6.35 MM) ID EF 3
–––*–––
62 AN929–5J . CAP ASSY, 0.500–20 EF 1
– 62 AN929–5K . CAP ASSY, 0.500–20 EF ALT
63 AN929–4J . CAP ASSY, 0.4375–20 EF 1
– 63 AN929–4K . CAP ASSY, 0.4375–20 EF ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
NOV 15/99
FUEL CONTROL, HEATER KIT (250–C30G/2)

73-20-00
FIGURE 6
PAGE 0
SEP 1/98
FUEL CONTROL HEATER KIT (250–C30G/2)

73-20-00
FIGURE 6
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
6 FUEL CONTROL, HEATER KIT (250–C30G/2)
– FIG. REF FUEL SYSTEM ASSY (REF 72–00–00, FIG. 4) F REF

1 23058112 . TUBE ASSY, DUMMY IGNITER PLUG TO F 1
BULKHEAD FITTING
2 FIG. REF . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE F REF
(REF 73–20–00, FIG. 5)
3 MS21043–3 . NUT, 0.190–32 F 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) F 1
5 23039030–03 . CLAMP, CUSHIONED 0.250 IN. (6.35 MM) ID F 1
6 23039030–08 . CLAMP, CUSHIONED 0.562 IN. (14.27 MM) ID F 1
7 23058109 . BRACKET, FLAT F 1
–––*–––
8 23057782 . TUBE ASSY, SHUTOFF VALVE TO FUEL CONTROL F 1
PC HEATER
9 23057783 . TUBE ASSY, AIR FUEL CONTROL HEATER F 1
(R&R 23060409, PER 250 CEB 73–3069)
– 9 23060409 . TUBE ASSY, AIR FUEL CONTROL HEATING F 1
10 FIG. REF . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS F REF
(REF 73–20–00, FIG. 5)
11 6875709 . VALVE ASSY, PLUG SHUTOFF F 1
12 AN924–4J . NUT, 0.4375–20 F 2
– 12 AN924–4K . NUT, 0.4375–20 F ALT
13 AN960–716 . WASHER, 0.4375 IN. (11.112 MM) ID F 4
14 AN832–4J . UNION, 0.4375–20 F 2
– 14 AN832–4K . UNION, 0.4375–20 F ALT
15 AN815–4J . UNION, 0.4375–20 F 1
– 15 AN815–4K . UNION, 0.4375–20 F ALT
16 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) F 2
17 MS21043–4 . NUT, 0.250–28 F 2
(REF 250 CEB 73–3082)
18 AN960C416L . WASHER, 0.250 IN.(6.35 MM) ID F 2
(S P/N MS9320–10) (REF 250 CEB 73–3082)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
73-20-00
FIGURE 6
PAGE 3
SEP 1/98
N2 OVERSPEED SOLENOID VALVE ASSY

FIGURE 1
73-20-00
FIGURE 7
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
7 N2 OVERSPEED SOLENOID VALVE ASSY
– 1 6892791 VALVE ASSY, SOLENOID, NORMALLY CLOSED AD 1

(REF 73–20–00, FIG. 1)
(R&R 6899254, PER 250 CEB 73–3005)
– 1 6899254 VALVE ASSY, SOLENOID, NORMALLY CLOSED 1
(R&R 23007826, PER 250 CEB 75–3013)
(REF 250 CEB 73–3018)
– 1 23007826 VALVE ASSY, SOLENOID, NORMALLY CLOSED 1
(REF 73–20–00, FIGS. 1 THRU 5)
2 V105–18 . COIL ASSY (V96487) 1
3 S108A11 . SCREW, NO. 4–48 X 1.6 IN. (40.6 MM) (V96487) 2
–––*–––
4 V5013–131 . VALVE COVER, NAMEPLATE SIDE (V96487) 1
5 V5032–131 . CONNECTOR, ASSY (V96487) 1
6 V5004–12520 . SPRING (V96487) 1
7 V113–3 . PLATE (V96487) 1
8 V5003 . PLUNGER (V96487) 1
9 V5002–02 . DISC SEAL (V96487) 2
10 V5015–02 . SPRING (V96487) 1
11 V5023–401 . RING, BACKUP (V96487) 1
12 S101AC111 . O–RING (V96487) 1
13 S100–32 . LOCKPIN (V96487) 2
14 V5011–125 . SEAT (V96487) 2
15 S101AC9 . O–RING (V96487) 1
16 V5010–021 . BODY (V96487) 1
– 17 MS21043–4 . NUT, 0.250–28 4
– 18 AN500D4–6 . SCREW, MACHINE 4

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 7
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
POWER TURBINE OVERSPEED (250–C30, –C30S, –C30G, –C30G/2)

73-21-00
FIGURE 1
PAGE 0
SEP 1/98
POWER TURBINE OVERSPEED (250–C30, –C30S, –C30G, –C30G/2)

73-21-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
1 POWER TURBINE OVERSPEED

(250–C30, –C30S, –C30G, –C30G/2)
– 1 6896816 ELECTRICAL SYSTEM ASSY, ENGINE ADE 1

(REF 74–10–00 & 74–20–00) (REF 73–21–00,
FIG. 4, FOR DETAILS OF 250–C30 23009300
ENGINE ELECTRICAL SYSTEM ASSY)
– 1 23055450 ELECTRICAL SYSTEM ASSY, ENGINE F 1
(REF 74–10–00 & 74–20–00)
2 FIG. REF . HARNESS ASSY, ELECTRICAL, ENGINE REF
3 MS21043–3 . NUT, 0.190–32 1
4 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID 1
5 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 1
6 6739844–5 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID 1
– 6 MS9351–02 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID ALT
7 MS21043–3 . NUT, 0.190–32 1
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 1
(REF 250 CEB 73–3076)
– 11 23039030–04 . CLAMP, CUSHIONED, 0.312 IN. (7.93 MM) ID 1
(REF 250 CEB 73–3076) (SB 23039030–07)
12 MS21043–3 . NUT, 0.190–32 3
(QTY 1, REF 250 CEB 73–3076)
13 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 3
(QTY 1, REF 250 CEB 73–3076)
14 6844316 . BRACKET, ANGLE, 90° 1
16 MS21043–3 . NUT, 0.190–32 1
17 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 1
– 19 MS9351–06 . CLAMP, CUSHIONED, 0.438 IN. (11.13 MM) ID ALT
20 MS21043–3 . NUT, 0.190–32 1
21 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) 1
23 MS21043–3 . NUT, 0.190–32 2
24 6899149 . BRACKET ASSY, SPEED PICKUP HARNESS 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
DEC 15/01
UNITS
1234567 CODE ASSY
– 25 6894611 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC A 1

(SB 23001751, PER 250 CEB 73–3006)
(SB 23001751, PER CEB 73–3006)
(REF 250 CEB–A–73–3015)
(SB 23001768, PER 250 CEB 73–3008)
(REF 250 CEB–A–73–3015)
– 25 23005471 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC AD AR
(REF 250 CEB–A–73–3015) (FRO 23004821)
– 25 23005479 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC AD 1
(FRO 23004821)
– 25 23004821 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC AD 1
(R&R 23031532, PER 250 CEB–73–3034)
– 25 23031532 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC ADE 1
(R&R 23052604, PER 250 CEB 73–3052)
– 25 23052604 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC ADE 1
(FRO 23054053)
25 23054053 . CONTROL ASSY, N2 OVERSPEED, ELECTRONIC 1
R – 26 23064021 . . PLATE, IDENTIFICATION, CONTROL ASSY, 1
N2 OVERSPEED (SB 23073653)
R – 26 23073653 . . PLATE, IDENTIFICATION, CONTROL ASSY, 1
N2 OVERSPEED
– 27 MS9489–16 . BOLT, 0.190–32 X 1.125 IN. (28.58 MM) 3
(SB MS9489–20, PER 250 CEB 73–3034)
27 MS9489–20 . BOLT, 0.190–32 X 1.375 IN. (26.988 MM) ADE 3
28 MS35333–73 . WASHER, LOCK, FLAT, INT, 0.190 IN. (4.83 MM) ID 1
(REF 250 CEB–A–73–3015)
– 30 6823112 . WASHER, 0.191 ID X 0.68 OD X 0.63 IN. ADE 6
(4.85 X 17.3 X 16.0 MM)
(SB 23031507, PER 250 CEB 73–3034)
31 23031507 . WASHER 0.191 ID X 0.60 OD X 0.63 IN. 6
(4.85 X 15.2 X 16.0 MM)
32 6866501 . DAMPER 6
(5.54 X 15.88 X 6.35 MM) (REF 250 CEB 73–3034)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
– 34 MS35338–43 . WASHER, LOCK ADE 1

(S P/N MS35333–75)
– 34 MS35333–73 .WASHER, LOCK, FLAT, INT, 0.190 IN. (4.83 MM) ID F 1
– 35 AN960D10L . WASHER, FLAT ADE 2
36 MS25083–2AC6 . . WIRE, GROUND JUMPER 1
37 NAS1190E06P5L . . SCREW, SLFLKG, 0.1380–32 X 0.312 IN. (7.92 MM) 1
37 MS35333–71 . . WASHER, LOCK, FLAT, 0.138 IN. (3.51 MM) ID 1
38 FIG. REF . PICKUP ASSY, DUAL COIL, N2 RPM REF
(REF 72–60–00, FIG. 1 & 4)
39 FIG. REF . VALVE ASSY, N2 OVERSPEED SOLENOID, REF
NORMALLY CLOSED (REF 73–20–00, FIG. 1 & 5)
40 FIG. REF . PICKUP ASSY, MAGNETIC, N1 REF
(REF 72–60–00, FIG. 1 & 4)
41 6899311 . SWITCH & BRACKET ASSY ADE 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
73-21-00
FIGURE 1
PAGE 5
SEP 1/98
POWER TURBINE OVERSPEED (250–C30P)

73-21-00
FIGURE 2
PAGE 0
SEP 1/98
POWER TURBINE OVERSPEED (250–C30P)

73-21-00
FIGURE 2
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
2 POWER TURBINE OVERSPEED (250–C30P)
– 1 23004547 ELECTRICAL SYSTEM ASSY, ENGINE (UIA 23004531) B 1

– 1 23062067 ELECTRICAL SYSTEM ASSY, ENGINE (UIA 23062065) B 1
(REF 74–10–00 & 74–20–00)
2 FIG. REF . HARNESS ASSY, ELECTRICAL, ENGINE B REF
– 3 MS9351–02 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID B ALT
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
3 MS21043–3 . NUT, 0.190–32 B 1
4 6844316 . BRACKET, ANGLE, 90° B 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 2
4 MS21043–3 . NUT, 0.190–32 B 2
5 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
5 MS21043–3 . NUT, 0.190–32 B 1
(REF 250 CEB 73–3076)
(REF 250 CEB 73–3076)
6 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
(REF 250 CEB 73–3076)
6 MS21043–3 . NUT, 0.190–32 B 1
(REF 250 CEB 73–3076)
– 7 6739844–7 . CLAMP, CUSHIONED, 0.500 IN. (12.7 MM) ID B 1
(FRO 23060015–08)
(S P/N MS9351–04)
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ID B 1
7 MS21043–3 . NUT, 0.190–32 B 1
– 8 MS9351–02 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID B ALT
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
8 MS21043–3 . NUT, 0.190–32 B 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
9 6898933 . BRACKET ASSY, SPEED PICKUP HARNESS B 1

10 23036825–2 . CAP, METAL DUST (ADDED, PER 250 CEB 73–3047) B 1
(REF 250 CEB 73–3071)
11 23036570 . BRACKET, N2 OVERSPEED CONTROL CONN B 1
(ADDED, PER 250 CEB 73–3047)
12 M83723/61–214R . RECEPTACLE, DUMMY B 1
(ADDED, PER 250 CEB 73–3047)
13 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) B 4
(ADDED, PER 250 CEB 73–3047)
14 MS21043–04 . NUT, 0.250–28 (ADDED, PER 250 CEB 73–3047) B 4
15 MS9489–08 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) B 2
(REF 250 CEB 73–3047)
– 15 AN101010 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) B ALT
(REF 250 CEB 73–3047)
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
POWER TURBINE OVERSPEED (250–C30M)

FIGURE 3
73-21-00
FIGURE 3
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
3 POWER TURBINE OVERSPEED (250–C30M)
– 1 23005223 ELECTRICAL SYSTEM ASSY, ENGINE C 1

(REF 74–10–00 & 74–20–00)
2 FIG. REF . HARNESS ASSY, ELECTRICAL, ENGINE C REF
3 MS21043–3 . NUT, 0.190–32 C 1
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
– 3 MS9351–02 . CLAMP, 0.188 IN. (4.78 MM) ID C ALT
4 MS21043–3 . NUT, 0.190–32 C 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
4 MS9594–132 . BRACKET C 1
5 MS21043–3 . NUT, 0.190–32 C 2
5 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 2
5 6844316 . BRACKET, ANGLE, 90° C 1
6 MS21043–3 . NUT, 0.190–32 C 1
6 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
6 MS9365–05 . BRACKET, FLAT C 1
(REF 250 CEB 73–3076)
R – 7 23039030–04 . CLAMP, CUSHIONED, 0.312 IN. (7.93 MM) ID C 1
(REF 250 CEB 73–3076) (SB 23039030–07)
R 7 23039030–07 . CLAMP, CUSHIONED, 0.500 IN. (12.7 MM) ID C 1
7 MS21043–3 . NUT, 0.190–32 C 1
(REF 250 CEB 73–3076)
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
(REF 250 CEB 73–3076)
8 MS21043–3 . NUT, 0.190–32 C 2
8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 1/00
UNITS
1234567 CODE ASSY
– 9 6899149 . BRACKET ASSY, SPEED PICKUP HARNESS C 1

– 10 23036570 . BRACKET, N2 OVERSPEED CONTROL CONN C 1
(ADDED, PER 250 CEB 73–3047)
– 11 M83723/61–214R . RECEPTACLE, DUMMY C 1
(ADDED, PER 250 CEB 73–3047)
– 12 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) C 4
(ADDED, PER 250 CEB 73–3047)
– 13 MS21043–04 . NUT, 0.250–28 (ADDED, PER 250 CEB 73–3047) C 4
– 14 MS9489–08 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) C 2
(ADDED, PER 250 CEB 73–3047)
– 14 AN101010 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) C ALT
– 15 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID C 2
(ADDED, PER 250 CEB 73–3047)
–––*–––
16 6899311 . SWITCH & BRACKET ASSY C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
73-21-00
FIGURE 3
PAGE 3
SEP 1/98
POWER TURBINE OVERSPEED (250–C30 ENGINE ASSY 23009300)

73-21-00
FIGURE 4
PAGE 0
SEP 1/98
POWER TURBINE OVERSPEED (250–C30 ENGINE ASSY 23009300)

73-21-00
FIGURE 4
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
4 POWER TURBINE OVERSPEED

(250–C30 ENGINE ASSY 23009300)
– 1 23036824 ELECTRICAL SYSTEM ASSY, ENGINE A 1

(REF 74–10–00 & 74–20–00)
2 FIG. REF . HARNESS ASSY, ELECTRICAL, ENGINE A REF
3 MS21043–3 . NUT, 0.190–32 A 1
3 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID A 1
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 1
– 3 MS9489–05 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A ALT
– 3 MS9351–02 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID A ALT
4 MS21043–3 . NUT, 0.190–32 A 1
4 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 1
5 MS21043–3 . NUT, 0.190–32 A 2
5 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 2
5 6844316 . BRACKET, ANGLE, 90° A 1
(REF 250 CEB 73–3076)
R – 6 23039030–04 . CLAMP, CUSHIONED, 0.312 IN. (7.93 MM) ID A 1
(REF 250 CEB 73–3076) (SB 23039030–07)
R 6 23039030–07 . CLAMP, CUSHIONED, 0.500 IN. (12.7 MM) ID A 1
6 MS21043–3 . NUT, 0.190–32 A 1
(REF 250 CEB 73–3076)
6 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 1
(REF 250 CEB 73–3076)
7 MS21043–3 . NUT, 0.190–32 A 1
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 1
– 7 MS9351–06 . CLAMP, 0.438 IN. (11.13 MM) ID A ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
NOV 1/00
UNITS
1234567 CODE ASSY
8 MS21043–3 . NUT, 0.190–32 A 1

8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 1
–––*–––
9 MS21043–3 . NUT, 0.190–32 A 2
9 6899149 . BRACKET ASSY, SPEED PICKUP HARNESS A 1
10 23036570 . BRACKET, N2 OVERSPEED CONTROL CONN A 1
(ADDED, PER 250 CEB 73–3047)
11 M83723/61–214R . RECEPTACLE, DUMMY A 1
(ADDED, PER 250 CEB 73–3047)
12 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) A 4
(ADDED, PER 250 CEB 73–3047)
13 MS21043–04 . NUT, 0.250–28 (ADDED, PER 250 CEB 73–3047) A 4
14 MS9489–08 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) A 2
(ADDED, PER 250 CEB 73–3047)
– 14 AN101010 . BOLT, 0.190–32 X 0.625 IN. (15.88 MM) A ALT
(ADDED, PER 250 CEB 73–3047)
(ADDED, PER 250 CEB 73–3047)
–––*–––
16 6899311 . SWITCH & BRACKET ASSY A 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 1/00
ENGINE ELECTRICAL HARNESS ASSY (250–C30, –C30S, –C30G)

FIGURE 5
73-21-00
FIGURE 5
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
5 ENGINE ELECTRICAL HARNESS ASSY

(250–C30, –C30S, –C30G)
– 1 6899259 HARNESS ASSY, ELECTRICAL, ENGINE (FRO 23050886) AD 1

– 1 23050886 HARNESS ASSY, ELECTRICAL, ENGINE ADE 1
(REF 73–21–00, FIG. 1 & 4, FOR NHA)
2 M83723/85K1624N . CONNECTOR, PLUG ADE 1
3 M83723/75R0803N . CONNECTOR, PLUG ADE 3
4 MS3459KT8S1S . CONNECTOR, PLUG ADE 2
5 M83723/75R0803–6 . CONNECTOR, PLUG ADE 2
8 MS3417–16N . CLAMP, STRAIGHT ADE 1
9 MS3418–8N . CLAMP, 90° ADE 5
12 MS3418–14N . CLAMP, 90° ADE 1
13 MS25036–103 . TERMINAL, NO. 10 (4.828 MM) ADE 2
13 MS25171–1S . NIPPLE, ELECTRICAL TERMINAL ADE 2
14 MS3368–1–9A . STRAP, IDENTIFICATION ADE 2
15 MS3368–1–9B . STRAP, IDENTIFICATION ADE 11
16 6889140–04 . INSULATION SLEEVING, 23 IN. (584.2 MM) ADE AR
22 NAS1745–4 . SPLICE ADE 5
23 M27500–120RB2T14 . CABLE, SHIELDED, 10 FT (3048 MM) ADE AR
24 6861980 . SLEEVE, 0.125 OD X 22 FT (3.175 X 6706 MM) ADE AR
– 24 23037401 . SLEEVE, ANTI–CHAFE (SERV REPL PART) ADE AR
25 M22759/4–20–9 . WIRE, 39 FT (11887.2 MM) ADE AR
26 M83723/28–20 . SEAL, CONNECTOR, PLUG ADE 9
27 IN5550 . DIODE ADE 2
28 NAS1745–2 . SPLICE ADE 4
29 M23053/6A . TUBING, HEAT SHRINKABLE, 5 IN. (127 MM) ADE AR
– 30 MIL–S46163 . SEALANT ADE AR
– 31 RTV106 . POTTING MATERIAL ADE AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
ENGINE ELECTRICAL HARNESS ASSY (250–C30P)

FIGURE 6
73-21-00
FIGURE 6
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
6 ENGINE ELECTRICAL HARNESS ASSY (250–C30P)
1 23004963 HARNESS ASSY, ELECTRICAL, ENGINE (FRO 23050888) B 1

– 2 23050888 HARNESS ASSY, ELECTRICAL B 1
(REF 73–21–00, FIG. 2, FOR NHA)
3 M83723–75R1415N . CONNECTOR, PLUG B 1
– 4 MS3474E10–6P . CONNECTOR, RECEPTACLE (SB MS3474L10–6P) B 1
4 MS3474L10–6P . CONNECTOR, RECEPTACLE B 1
– 4 M83723–06R1006N . CONNECTOR, RECEPTACLE B ALT
5 MS3459KT8S–1S . CONNECTOR, PLUG (UW M85049/51–1–8N) B 2
5 M83723/23R080IN . CONNECTOR, PLUG (UW M85049/47–N08) B ALT
6 MS3474E12–10P . CONNECTOR, RECEPTACLE (SB MS3474L12–10P) B 1
6 MS3474L12–10P . CONNECTOR, RECEPTACLE B 1
6 M83723–06R1210N . CONNECTOR, RECEPTACLE B ALT
7 M83723–75R0803N . CONNECTOR, PLUG B 1
8 MS3418–14N . CONNECTOR, BACKSHELL, 90° B 1
9 MS3417–10N . CONNECTOR, BACKSHELL, 90° B 1
10 M85049/51–1–8N . CONNECTOR, BACKSHELL, 90° B 1
10 MS3418–8N . CONNECTOR, BACKSHELL, 90° B ALT
11 M85049/47–N08 . CONNECTOR, BACKSHELL, 90° B 2
11 23051867–8 . CONNECTOR, BACKSHELL, 90° B ALT
12 MS3417–12N . CONNECTOR, BACKSHELL B 1
13 MS25036–103 . TERMINAL, NO. 10 B 1
14 MS25171–1S . NIPPLE, ELECTRICAL TERMINAL B 1
15 MS3368–1–9A . STRAP, IDENTIFICATION B 3
16 MS3367–1–9 . STRAP, CABLE TIE B 7
(S P/N MS3367–3–9)
17 6889140–04 . INSULATION SLEEVING, 0.125 IN. (3.18 MM) ID B AR
23 NAS1745–4 . SPLICE B 2
24 NAS1745–2 . SPLICE B 2
25 M27500–20RB2T14 . CABLE, SHIELDED, 10 FT. (3048 MM) B AR
26 6861980 . SLEEVE, 0.125 OD X 22 FT (3.18 X 6706 MM) B AR
– 27 23037401 . SLEEVE, ANTI–CHAFE (SERV REPL PART) B AR
28 M22759/4–20–9 . WIRE, 39 FT (11887.2 MM) B AR
29 M83723–28–20 . SEAL, CONNECTOR, PLUG B 7
30 M83723–75R0803–6 . CONNECTOR, PLUG B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
31 M3417–8N . CONNECTOR, BACKSHELL B 1

32 23004351 . MARKER, IDENTIFICATION B 6
33 1N5550 . DIODE B 1
34 M23053/6A . TUBING, HEAT SHRINKABLE, 0.375 IN. (9.53 MM) ID B AR
– 35 RTV106 . POTTING MATERIAL B AR
– 36 MIL–S46163 . SEALANT B AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
73-21-00
FIGURE 6
PAGE 3
SEP 1/98
ENGINE ELECTRICAL HARNESS ASSY (250–C30M)

FIGURE 7
73-21-00
FIGURE 7
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
7 ENGINE ELECTRICAL HARNESS ASSY (250–C30M)
– 1 23005225 HARNESS ASSY, ELECTRICAL, ENGINE C 1

(FRO 23050887)
– 1 23050887 HARNESS ASSY, ELECTRICAL ENGINE C 1
(REF 73–21–00, FIG. 3, FOR NHA)
2 M83723/85K1624N . CONNECTOR, PLUG C 1
3 M83723/75R0803N . CONNECTOR, PLUG C 3
4 MS3459KT8S1S . CONNECTOR, PLUG C 2
5 M83723/75R0803–6 . CONNECTOR, PLUG C 2
8 MS3417–16N . CLAMP, STRAIGHT C 1
9 MS3418–8N . CLAMP, 90° C 4
12 MS3418–14N . CLAMP, 90° C 1
13 MS25036–103 . TERMINAL, NO. 10 (4.828 MM) C 1
13 MS25171–1S . NIPPLE, ELECTRICAL TERMINAL C 1
14 MS3368–1–9A . STRAP, INDENT C 2
15 23004351 . MARKER, IDENTIFICATION C 10
16 6889140–04 . INSULATION SLEEVING, 23 IN. (584.2 MM) C AR
17 MS3367–1–9 . STRAP, CABLE TIE C 10
(S P/N MS3367–3–9)
22 NAS1745–4 . SPLICE C 5
23 M27500–20RB2T14 . CABLE, SHIELDED, 10 FT (3048 MM) C AR
24 6861980 . SLEEVE, 0.125 OD X 22 FT (3.18 X 6706 MM) C AR
24 A 23037401 . SLEEVE, ANTI–CHAFE (SERV REPL PART) C AR
25 M22759/4–20–9 . WIRE, 39 FT (11887.2 MM) C AR
26 M83723/28–20 . SEAL, CONNECTOR, PLUG C 9
27 IN5550 . DIODE C 2
28 NAS1745–2 . SPLICE C 4
29 M23053/6A . TUBING, HEAT SHRINKABLE, 5 IN. (127 MM) C AR
– 30 MIL–S46163 . SEALANT, TYPE 3, GRADE R C AR
– 31 RTV106 . POTTING MATERIAL C AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 7
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
ENGINE ELECTRICAL HARNESS ASSY (250–C30G/2)

FIGURE 8
73-21-00
FIGURE 8
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
8 ENGINE ELECTRICAL HARNESS ASSY (250–C30G/2)
– 1 23055454 HARNESS ASSY, ELECTRICAL, ENGINE F 1

(REF 73–21–00, FIG. 1, FOR NHA)
2 M83723/85K1624N . CONNECTOR, PLUG F 1
3 M83723/75R0803N . CONNECTOR, PLUG F 2
4 MS3459KT8S–1S . CONNECTOR, PLUG F 2
5 M83723/75R0803–6 . CONNECTOR, PLUG F 1
8 MS3417–16N . BACKSHELL, 90° F 1
9 MS3418–8N . BACKSHELL, 90° F 4
10 MS3417–8N . BACKSHELL, STRAIGHT F 1
11 MS3417–12N . BACKSHELL, STRAIGHT F 1
12 MS3418–14N . BACKSHELL, 90° F 1
13 MS25036–103 . TERMINAL, NO. 10 (4.82 MM) F 1
14 MS25171–1S . NIPPLE, ELECTRICAL TERMINAL F 1
15 MS3368–1–9A . STRAP, IDENTIFICATION F 2
16 MS3368–1–9B . STRAP, IDENTIFICATION F 8
17 6889140–04 . INSULATION SLEEVING, 23 IN. (584.2 MM) F AR
23 NAS1745–4 . SPLICE F 5
24 M27500–20RB2T14 . CABLE, SHIELDED, 10 FT (3048 MM) F AR
25 6861980 . SLEEVE, 0.125 OD X 22 FT (3.175 X 6706 MM) F AR
26 M22759/4–20–9 . WIRE, 39 FT (11887.2 MM) F AR
27 M83723/28–20 . SEAL, CONNECTOR, PLUG F 9
28 IN5550 . DIODE F 1
29 NAS1745–2 . SPLICE F 4
30 M23053/6A . TUBING, HEAT SHRINKABLE, 5 IN. (127 MM) F AR
– 31 MIL–S46163 . SEALANT F AR
– 32 RTV106 . POTTING MATERIAL F AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 8
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
73-21-00
FIGURE 8
PAGE 2
SEP 1/98
TABLE OF CONTENTS
CHAPTER 74
ENGINE IGNITION SYSTEM
ENGINE IGNITION SYSTEM: 74–00

IGNITION SYSTEM (EXCITERS & COUNTER):
(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–10–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–10–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–10–00 3
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–10–00 4
IGNITION SYSTEM (SPARK IGNITER LEADS & IGNITERS):
(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–20–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–20–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–20–00 3
(250–C30 ENGINE ASSY 23009300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–20–00 4
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74–20–00 5
74-CONTENTS
PAGE 1
SEP 1/98
74-CONTENTS
PAGE 2
SEP 1/98
ENGINE IGNITION SYSTEM
74-CHAPTER TITLE
PAGE 1
SEP 1/98
IGNITION SYSTEM (EXCITER & COUNTER) (250–C30, –C30S, –C30G)

FIGURE 1
74-10-00
FIGURE 1
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
1 IGNITION SYSTEM (EXCITER & COUNTER)

(250–C30, –C30S, –C30G)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE ADE REF

(REF 73–21–00, FIG. 1 OR 4)
1 6870885 . EXCITER ASSY, IGNITION, HIGH ENERGY ADE 2
(SEE PUB. 14W3, CHAPTER 74–10–01, FOR DETAILS)
– 1 6870891 . EXCITER ASSY, IGNITION, HIGH ENERGY ADE ALT
2 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) ADE 3
2 AN101008 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) A ALT
(UIA 23036824 C30(HU))
3 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 3
4 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID ADE 6
–––*–––
5 AN364–1032 . . NUT, 0.190–32 (UIA 6870885) ADE 1
R – 5 MS20364–1032A . . NUT, 0.190–32 (UIA 6870891) AB 1
R – 5 MS21083N3 . . NUT, 0.190–32 (UIA 6899093) AB 1
(S P/N MS20364–1032A)
6 AN960–10L . . WASHER, 0.190 IN. (4.83 MM) ID ADE 1
(UIA 6870885, 6870891 & 6899093)
R 7 6894627 . COUNTER ASSY, STARTER ADE 1
R 8 MS21043–06 . NUT, SLFLKG, 0.138–32 ADE 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
IGNITION SYSTEM (EXCITER & COUNTER) (250–C30P)

FIGURE 2
74-10-00
FIGURE 2
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
2 IGNITION SYSTEM (EXCITER & COUNTER) (250–C30P)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE B REF

(REF 73–21–00, FIG. 2)
1 6870885 . EXCITER ASSY, IGNITION, HIGH ENERGY B 1
– 1 6870891 . EXCITER ASSY, IGNITION, HIGH ENERGY B ALT
2 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) B 3
–––*–––
4 AN364–1032 . . NUT, 0.190–32 (UIA 6870885) B 1
R – 4 MS20364–1032A . . NUT, 0.190–32 (UIA 6870891) B 1
R – 4 MS21083N3 . . NUT, 0.190–32 (UIA 6899093) B 1
(S P/N MS20364–1032A)
5 AN960–10L . . WASHER, 0.190 IN. (4.83 MM) ID B 1
(UIA 6870885, 6870891 & 6899093)
R 6 6894627 . COUNTER ASSY, STARTER B 1
R 7 MS21043–06 . NUT, SLFLKG, 0.138–32 B 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
IGNITION SYSTEM (EXCITER & COUNTER) (250–C30M)

FIGURE 3
74-10-00
FIGURE 3
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
3 IGNITION SYSTEM (EXCITER & COUNTER) (250–C30M)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE C REF

(REF 73–21–00, FIG. 3)
1 6870885 . EXCITER ASSY, IGNITION, HIGH ENERGY C 1
– 1 6870891 . EXCITER ASSY, IGNITION, HIGH ENERGY C ALT
2 MS21043–3 . NUT, SLFLKG, 0.190–32 C 3
–––*–––
4 AN364–1032 . . NUT, 0.190–32 (UIA 6870885) C 1
R – 4 MS20364–1032A . . NUT, 0.190–32 (UIA 6870891) C 1
R – 4 MS21083N3 . . NUT, 0.190–32 (UIA 6899093) C 1
(S P/N MS20364–1032A)
5 AN960–10L . . WASHER, 0.190 IN. (4.83 MM) ID C 1
(UIA 6870885, 6870891 & 6899093)
R 6 6894627 . COUNTER ASSY, STARTER C 1
R 7 MS21043–06 . NUT, SLFLKG, 0.138–32 C 2
–––*–––
R 8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 1
R 9 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
IGNITION SYSTEM (EXCITER & COUNTER) (250–C30G/2)

FIGURE 4
74-10-00
FIGURE 4
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
4 IGNITION SYSTEM (EXCITER & COUNTER)

(250–C30G/2)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE F REF

(REF 73–21–00, FIG. 1)
1 6870885 . EXCITER ASSY, IGNITION, HIGH ENERGY F 1
– 1 6870891 . EXCITER ASSY, IGNITION, HIGH ENERGY F ALT
2 MS21043–3 . NUT, SLFLKG, 0.190–32 F 3
3 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID F 3
–––*–––
4 AN364–1032 . . NUT, 0.190–32 (UIA 6870885) F 1
– 4 MS21083N3 . . NUT, 0.190–32 (UIA 6870891, 6899093) F 1
(S P/N MS20364–1032A)
5 AN960–10 . . WASHER, 0.190 IN. (4.83 MM) ID F 1
(UIA 6870885, 6870891 & 6899093)
R 6 6894627 . COUNTER ASSY, STARTER (DISC.) F 1
R 7 MS21043–06 . NUT, SLFLKG, 0.138–32 (DISC.) F 2
–––*–––
R 8 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) (DISC.) F 1
R 9 AN960–10L . WASHER, 0.190 IN. (4.83 MM) ID (DISC.) F 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
IGNITION SYSTEM (SPARK IGNITER LEADS & IGNITERS) (250–C30, –C30S, –C30G)
FIGURE 1
74-20-00
FIGURE 1
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
1 IGNITION SYSTEM (SPARK IGNITER LEADS &

IGNITERS) (250–C30, –C30S, –C30G)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE ADE REF

(REF 73–21–00, FIG. 1) (REF 74–20–00, FIG. 4,
FOR DETAILS OF 250–C30 ENGINE ASSY
23009300, ELECTRICAL SYSTEM ASSY)
1 6893282 . LEAD ASSY, IGNITER, SPARK, LH ADE 1
– 1 23060815 . LEAD ASSY, IGNITER, SPARK, LH ADE ALT
2 6893283 . LEAD ASSY, IGNITER, SPARK, RH ADE 1
– 2 23060816 . LEAD ASSY, IGNITER, SPARK, RH ADE ALT
3 MS21043–3 . NUT, 0.190–32 ADE 9
4 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.3 MM) ADE 5
5 23039030–04 . CLAMP, CUSHIONED, 0.312 IN. (7.92 MM) ID ADE 10
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ADE 4
8 NAS509–7 . NUT, 0.438–20 ADE 1
9 6854056 . BRACKET, FLAT, 1.00 IN. (25.4 MM), 0.190 DIA ADE 1
X 0.438 DIA IN. (4.83 X 11.11 MM) HOLES
– 10 23039030–10 . CLAMP, CUSHIONED, 0.688 IN. (17.48 MM) ID ADE AR
– 10 23039030–11 . CLAMP, CUSHIONED, 0.750 IN. (19.05 MM) ID ADE AR
– 11 MS9351–02 . CLAMP, 0.188 IN. (4.78 MM) ID ADE ALT
12 54701 . . CONNECTOR ASSY (V81482) ADE 4
13 51378 . . . WASHER (V81482) ADE 4
14 51377 . . . SOCKET (V81482) ADE 4
15 51376 . . . CONNECTOR (V81482) ADE 4
16 51682 . . . GROMMET (V81482) ADE 4
17 52895 . . . GROMMET (V81482) ADE 4
18 54728 . . . SPRING ASSY (V81482) ADE 4
–––*–––
19 6899084 . IGNITER ASSY, SPARK ADE 2
– 19 6899085 . IGNITER ASSY, SPARK ADE ALT
– 19 23006267 . IGNITER ASSY, SPARK ADE AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITER) (250–C30P)

74-20-00
FIGURE 2
PAGE 0
SEP 1/98

74-20-00
FIGURE 2
PAGE 1
SEP 1/98

74-20-00
FIGURE 2
PAGE 2
SEP 1/98

74-20-00
FIGURE 2
PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
2 IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITERS)

(250–C30P)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE B REF

(REF 73–21–00, FIG. 2)
1 6893283 . LEAD ASSY, IGNITER, SPARK, RH B 1
– 1 23060816 . LEAD ASSY, IGNITER, SPARK, RH B ALT
2 MS21043–3 . NUT, 0.190–32 B 8
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 5
(UIA 23004547)
– 5 23039030–10 . CLAMP, CUSHIONED, 0.688 IN. (17.48 MM) ID B AR
(UIA 23004547)
– 5 23039030–11 . CLAMP, CUSHIONED, 0.750 IN. (19.05 MM) ID B AR
(UIA 23004547)
6 MS21043–3 . NUT, 0.190–32 (UIA 23004547) B 1
7 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) (UIA 23004547) B 1
(UIA 23004547)
9 NAS509–7 . NUT, 0.438–20 B 1
10 6854056 . BRACKET, FLAT, 1.00 IN. (25.4 MM), 0.190 DIA B 1
X 0.438 DIA IN. (4.83 X 11.11 MM) HOLES
11 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.3 MM) B 1
12 23039786 . BRACKET, N2 OVERSPEED SOLENOID CONN B 1
13 AN101025 . BOLT, 0.190–32 X 1.625 IN. (41.3 MM) B 2
(S P/N AN101024)
14 M83723/61–28R . RECEPTACLE, DUMMY B 1
– 14 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID B ALT
– 14 MS28778–04 . PACKING, 0.351 IN. (8.92 MM) ID B ALT
15 MS21043–04 . NUT, 0.250–28 B 4
16 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) B 4
17 MS9551–020 . BRACKET, FLAT B 1
– 17 MS9551–021 . BRACKET, FLAT B ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
18 MS9592–137 . BRACKET, ANGLE, 90° B 1

– 18 MS9592–138 . BRACKET, ANGLE, 90° B ALT
–––*–––
19 54701 . . CONNECTOR ASSY (V81482) B 2
20 51378 . . . WASHER (V81482) B 2
21 51377 . . . SOCKET (V81482) B 2
22 51376 . . . CONNECTOR (V81482) B 2
23 51682 . . . GROMMET (V81482) B 2
24 52895 . . . GROMMET (V81482) B 2
25 54728 . . . SPRING ASSY (V81482) B 2
26 6899084 . IGNITER ASSY, SPARK (UIA 23004547) B 1
– 26 6899085 . IGNITER ASSY, SPARK (UIA 23004547) B ALT
– 26 23006267 . IGNITER ASSY, SPARK B AR
27 6899084 . IGNITER ASSY, SPARK (UIA 23062067) B 1
– 27 6899085 . IGNITER ASSY, SPARK (UIA 23062067) B ALT
28 23053286 . PLUG ASSY, DUMMY IGNITER, AIR SUPPLY B 1
WITH RESTRICTOR (UIA 23062066)
29 6896301 . PLUG, DUMMY IGNITER (UIA 23004547) B 1
R 30 FIG. REF . TUBE ASSY, DUMMY IGNITER TO BULKHEAD FITTING B REF
(UIA 23062066) (REF 73–20–00, FIG. 3)
R 31 FIG. REF . HOSE ASSY, FIRESHIELD TO FUEL NOZZLE, B REF
NO. 4 X 17.75 IN. (450.85 MM) (UIA 23062066)
(REF 73–20–00, FIG. 2)
NOTE: ITEMS 31 THRU 35 ARE THE CLAMPING

CONFIGURATION WITH THE FUEL CONTROL HEATER
KIT INSTALLED.
32 MS21043–3 . NUT, 0.190–32 B 1

33 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.3 MM) B 1
– 35 AN960–10L . WASHER, FLAT B 1
– 36 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITERS) (250–C30M)

FIGURE 3
74-20-00
FIGURE 3
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
3 IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITERS)

(250–C30M)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE C REF

(REF 73–21–00, FIG. 3)
1 6893282 . LEAD ASSY, IGNITER, SPARK, LH C 1
– 1 23060815 . LEAD ASSY, IGNITER, SPARK, LH C ALT
2 MS21043–3 . NUT, 0.190–32 C 8
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 6
5 NAS509–7 . NUT, 0.438–20 C 1
6 6854056 . BRACKET, FLAT, 1.00 IN. (25.4 MM), 0.190 DIA C 1
X 0.438 DIA IN. (4.83 X 11.11 MM) HOLES
7 23039786 . BRACKET, N2 OVERSPEED SOLENOID CONN C 1
8 AN101025 . BOLT, 0.190–32 X 1.625 IN. (41.28 MM) C 2
(S P/N AN101024)
9 M83723/61–28R . RECEPTACLE, DUMMY C 1
10 MS21043–04 . NUT, 0.250–28 C 4
11 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) C 4
12 MS9551–020 . BRACKET, FLAT C 1
– 12 MS9551–021 . BRACKET, FLAT C ALT
13 MS9552–022 . BRACKET, FLAT C ALT
– 13 MS9592–137 . BRACKET, ANGLE, 90° C 1
– 13 MS9592–138 . BRACKET, ANGLE, 90° C ALT
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
14 54701 . . CONNECTOR ASSY (V81482) C 2

15 51378 . . . WASHER (V81482) C 2
16 51377 . . . SOCKET (V81482) C 2
17 51376 . . . CONNECTOR (V81482) C 2
18 51682 . . . GROMMET (V81482) C 2
19 52895 . . . GROMMET (V81482) C 2
20 54728 . . . SPRING ASSY (V81482) C 2
21 6899084 . IGNITER ASSY, SPARK C 1
– 21 6899085 . IGNITER ASSY, SPARK C ALT
– 21 23006267 . IGNITER ASSY, SPARK C AR
22 6896301 . PLUG, DUMMY IGNITER C 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
74-20-00
FIGURE 3
PAGE 3
SEP 1/98
IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITERS) (250–C30 ENGINE ASSY 23009300)
FIGURE 4
74-20-00
FIGURE 4
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
4 IGNITION SYSTEM
(SPARK IGNITER LEADS & IGNITERS)
(250–C30 ENGINE ASSY 23009300)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE A REF

(REF 73–21–00, FIG. 4)
1 6893282 . LEAD ASSY, IGNITER, SPARK, LH A 1
– 1 23060815 . LEAD ASSY, IGNITER, SPARK, LH A ALT
2 6893283 . LEAD ASSY, IGNITER, SPARK, RH A 1
– 2 23060816 . LEAD ASSY, IGNITER, SPARK, RH A ALT
3 MS21043–3 . NUT, 0.190–32 A 11
4 MS9489–06 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) A 5
– 6 MS9351–02 . CLAMP, 0.188 IN. (4.78 MM) ID A ALT
7 NAS509–7 . NUT, 0.438–20 A 1
8 6854056 . BRACKET, FLAT, 1.00 IN. (25.4 MM) 0.190 DIA A 1
X 0.438 DIA IN. (4.83 X 11.11 MM) HOLES
– 9 23039030–10 . CLAMP, CUSHIONED, 0.688 IN. (17.48 MM) ID A AR
– 9 23039030–11 . CLAMP, CUSHIONED, 0.750 IN. (19.05 MM) ID A AR
10 MS9489–05 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 4
11 23039786 . BRACKET, N2 OVERSPEED SOL CONN A 1
12 AN101025 . BOLT, 0.190–32 X 1.625 IN. (41.28 MM) A 2
(S P/N MS9489–22)
(S P/N AN101024)
13 M83723/61–28R . RECEPTACLE, DUMMY A 1
14 MS21043–04 . NUT, 0.250–28 A 4
15 MS51957–15 . SCREW, 0.375 IN. (9.53 MM) A 4
16 MS9551–020 . BRACKET, FLAT A 1
– 16 MS9551–021 . BRACKET, FLAT A ALT
17 MS9592–137 . BRACKET, ANGLE, 90° A 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
18 54701 . . CONNECTOR ASSY (V81482) A 4

19 51378 . . . WASHER (V81482) A 4
20 51377 . . . SOCKET (V81482) A 4
21 51376 . . . CONNECTOR (V81482) A 4
22 51682 . . . GROMMET (V81482) A 4
23 52895 . . . GROMMET (V81482) A 4
24 54728 . . . SPRING ASSY (V81482) A 4
25 6899084 . IGNITER ASSY, SPARK A 2
– 25 6899085 . IGNITER ASSY, SPARK A ALT
– 25 23006267 . IGNITER ASSY, SPARK A AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
74-20-00
FIGURE 4
PAGE 3
SEP 1/98
IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITER) (250–C30G/2)

74-20-00
FIGURE 5
PAGE 0
SEP 1/98
IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITER) (250–C30G/2)

74-20-00
FIGURE 5
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
5 IGNITION SYSTEM (SPARK IGNITER LEAD & IGNITER)

(250–C30G/2)
– FIG. REF ELECTRICAL SYSTEM ASSY, ENGINE F REF

(REF 73–21–00, FIG. 1)
1 6893282 . LEAD ASSY, IGNITER, SPARK, LH F 1
– 1 23060815 . LEAD ASSY, IGNITER, SPARK, LH F ALT
2 MS21043–3 . NUT, 0.190–32 F 4
3 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) F 3
6 NAS509–7 . NUT, 0.438–20 F 1
7 6854056 . BRACKET, FLAT, 1.00 IN. (25.4 MM), 0.190 DIA F 1
X 0.438 DIA IN. (4.83 X 11.11 MM) HOLES
8 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.29 MM) F 1
9 AN960–10L . WASHER, 0.190 IN. (4.84 MM) ID F 1
– 10 MS9351–02 . CLAMP, CUSHIONED, 0.188 IN. (4.78 MM) ID F ALT
–––*–––
11 54701 . . CONNECTOR ASSY (V81482) F 2
12 51378 . . . WASHER (V81482) F 2
13 51377 . . . SOCKET (V81482) F 2
14 51376 . . . CONNECTOR (V81482) F 2
15 51682 . . . GROMMET (V81482) F 2
16 52895 . . . GROMMET (V81482) F 2
17 54728 . . . SPRING ASSY (V81482) F 2
18 6899084 . IGNITER ASSY, SPARK F 1
– 18 6899085 . IGNITER ASSY, SPARK F ALT
– 18 23006267 . IGNITER ASSY, SPARK F AR
NOTE: ITEMS 19 THRU 23 IS THE CLAMPING

CONFIGURATION WITH THE FUEL CONTROL HEATER
KIT INSTALLED.
19 MS21043–3 . NUT, 0.190–32 F 1

20 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.3 MM) F 1
– 22 AN960–10L . WASHER, FLAT F 1
– 23 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) F 1
–––*–––
24 23053286 . PLUG ASSY, DUMMY IGNITER, AIR SUPPLY F 1
WITH RESTRICTOR
A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
TABLE OF CONTENTS
CHAPTER 75
ENGINE AIR SYSTEM
ENGINE AIR SYSTEM 75–00

AIR SYSTEM (ANTI–ICING & BLEED VALVE):
(250–C30, –C30S, –C30G) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–10–00 1
(250–C30P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–10–00 2
(250–C30M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–10–00 3
(250–C30G/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–10–00 4
COMPRESSOR BLEED VALVE ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–10–00 5
SOLENOID VALVE ASSY ANTI–ICING & BLEED VALVE . . . . . . . . . . . . . . . . . . . . . . 75–10–00 6
75-CONTENTS
PAGE 1
SEP 1/98
75-CONTENTS
PAGE 2
SEP 1/98
ENGINE AIR SYSTEM
75-CHAPTER TITLE
PAGE 1
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30, –C30S, –C30G)

75-10-00
FIGURE 1
PAGE 0
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30, –C30S, –C30G)

75-10-00
FIGURE 1
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
1 AIR SYSTEM (ANTI–ICING & BLEED VALVE)

(250–C30, –C30S, –C30G)
– FIG. REF AIR SYSTEM (REF 72–00–00, FIG. 4) ADE REF

1 6898979 . TUBE ASSY, ANTI–ICING VALVE TO FRONT SUPPORT ADE 1
– 2 6898560 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID ADE 1
(SB 23064620, PER 250 CEB 72–3209)
2 23064620 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID ADE 1
3 AN919–2J . REDUCER, 0.438–20 X 0.375–24 ADE 1
– 3 AN919–2K . REDUCER, 0.438–20 X 0.375–24 ADE ALT
– 5 6898513 . VALVE ASSY, AIR (FRO 6899080) AD 1
5 6899080 . VALVE ASSY, AIR (REF 250 CEB 75–3008) ADE 1
6 MS9217–07 . BOLT, 0.190–32 X 0.562 IN. (14.28 MM) ADE 2
–––*–––
7 AN919–5J . . REDUCER, 0.563–18 TO 3.375–24 ADE 1
8 6784419–4 . . SEAL, 0.688 IN. (17.48 MM) OD ADE 1
– 8 MS9372–021 . . SEAL, 0.688 IN. (17.48 MM) OD ADE ALT
9 6894058 . . RETAINER, SPRING, AIR VALVE ADE 1
10 6895551 . . SPRING, AIR VALVE ADE 1
11 6894055 . . PISTON, AIR VALVE (UIA 6898513) AD 1
– 11 6899061 . . PISTON, AIR VALVE (UIA 6899080) ADE 1
(REF 250 CEB 75–3008)
12 6898512 . . BODY, AIR VALVE (UIA 6898513) AD 1
– 12 6899059 . . BODY, AIR VALVE (UIA 6899080) ADE 1
13 6784419–2 . SEAL, 0.562 IN. (14.28 MM) OD ADE 1
14 FIG. REF . VALVE ASSY, SOLENOID, ANTI–ICING, NORMALLY REF
OPEN (REF 75–10–00, FIG. 6, FOR DETAILS)
15 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 2
16 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) ADE 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
17 6899159 . TUBE ASSY, SOLENOID TO BLEED VALVE AD 1

(UW 23001761 & 23001762 BLEED VALVE)
– 18 6844316 . BRACKET, ANGLE, 90° AD 1
– 18 MS9165–13 . BRACKET AD ALT
– 18 MS21043–3 . NUT, SLFLKG, 0.190–32 AD 1
– 18 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) AD 1
– 18 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID AD 1
– 18 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID AD 1
– 18 6864061–04 . BUSHING, SPLIT, 0.188 IN. (4.78 MM) ID AD 1
–––*–––
R 19 23001822 . TUBE ASSY, AIR, BLEED VALVE TO SOLENOID ADE 1
(UW 23005366 BLEED VALVE)
(FRO 23065489 BOEING C30(HU) APPL ONLY)
19 23065489 . TUBE ASSY, ACCUMULATOR TO BLEED VALVE A REF
(UIA 23062098) (BOEING C30(HU) APPL ONLY)
(REF 73–20–00, FIG. 1)
R 20 23001804 . TUBE ASSY, AIR, SOLENOID TO BLEED VALVE ADE 1
(UW 23005366 BLEED VALVE)
21 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 3
22 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ADE 3
– 22 MS9489–05 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ADE ALT
(NOT USED IN BOEING C30(HU) APPL)
23 6864061–08 . BUSHING, SPLIT, 0.250 IN. (6.35 MM) ID ADE 1
23 6864045–02 . CLIP, INNER, 0.445 IN. (11.30 MM) ID ADE 1
23 6864046–02 . CLIP, OUTER, 0.475 IN. (12.07 MM) ID ADE 1
– 27 6844316 . BRACKET, ANGLE, 90° (FRO MS9165–14) ADE 1
– 27 MS9597–074 . BRACKET, ANGLE, 90° (FRO MS9165–14) ADE ALT
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
DEC 15/01
UNITS
1234567 CODE ASSY
28 AN804J4 . TEE, 0.438–20 ADE 1

– 28 AN804K4 . TEE, 0.438–20 ADE ALT
29 AN924–4J . NUT, 0.438–20 ADE 1
– 29 AN924–4K . NUT, 0.438–20 ADE ALT
31 AN929–4J . CAP, 0.250 IN. ADE 1
– 31 AN929–4K . CAP, 0.250 IN. ADE ALT
32 FIG. REF . VALVE ASSY, SOLENOID, BLEED VALVE REF
(REF 75–10–00, FIG. 6, FOR DETAIL PARTS)
33 MS21043–3 . NUT, SLFLKG, 0.190–32 ADE 2
34 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) ADE 2
–––*–––
35 AN919–2J . REDUCER, 0.438–20 X 0.375–24 ADE 1
– 35 AN919–2K . REDUCER, 0.438–20 X 0.375–24 ADE ALT
(UW 23001761 & 23001762 BLEED VALVE)
37 AN833–3J . ELBOW,0.375–24 ADE 1
(UW 23001761 & 23001762 BLEED VALVE)
(REF 75–10–00, FIG. 5, FOR NEW VENTED PLUG)
38 AN924–3J . NUT, 0.375–24 ADE 1
(UW 23001761 & 23001762 BLEED VALVE)
– 40 23003145 . ELBOW, 45°, 0.438–20 AD 1
(R&R 23005208, PER 250 CEB 75–3006)
(FRO 23005203)
40 23005203 . FITTING, 45°, SPECIAL ADE 1
– 40 23005208 . FITTING, 45°, SPECIAL (REF 250 CEB 75–3006) ADE ALT
41 AN924–4J . NUT, 0.438–20 (UW 23003106) ADE 1
– 41 AN924–4K . NUT, 0.438–20 ADE ALT
42 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID (UW 23003106) ADE 1
43 FIG. REF . VALVE ASSY, COMPRESSOR BLEED ADE REF
44 MS9217–12 . BOLT, 0.190–32 X 0.875 IN. (22.23 MM) ADE 3
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
– 45 6899151 . GASKET, COMPRESSOR SCROLL BLEED PAD AD 1

(FRO 23005247, PER 250 CEB 75–3006 & 75–3012)
– 45 23001978 . GASKET, COMPRESSOR SCROLL BLEED PAD AD 1
(FRO 23005247, PER 250 CEB 75–3006 & 75–3012)
– 45 23005247 . GASKET, COMPRESSOR BLEED, PAD AD 1
(REF 250 CEB 75–3015)
(FRO 23007167, PER 250 CEB 75–3006)
R – 45 23068249 . GASKET, COMPRESSOR BLEED CRES ADE 1
(FRO 23007167)
R 45 23007167 . GASKET, COMPRESSOR BLEED PAD ADE 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30P)

FIGURE 2
75-10-00
FIGURE 2
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30P)
– FIG. REF AIR SYSTEM (REF 72–00–00, FIG. 5) B REF

1 6898979 . TUBE ASSY, ANTI–ICING VALVE TO FRONT B 1
SUPPORT (R&R 23008036, PER 250 CEB 75–3016)
– 1 23008036 . TUBE ASSY, ANTI–ICING VALVE TO FRONT SUPPORT B 1
– 1 AN929–3J . CAP ASSY B 1
– 1 AN929–3K . CAP ASSY B ALT
– 1 MS9314–03 . CAP ASSY B ALT
2 6898560 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID B 1
(SB 23064620, PER 250 CEB 72–3209)
2 23064620 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID B 1
3 AN919–2J . REDUCER, 0.438–20 X 0.375–24 B 1
– 3 AN919–2K . REDUCER, 0.438–20 X 0.375–24 B ALT
5 6899080 . VALVE ASSY, AIR B 1
6 MS9217–07 . BOLT, 0.190–32 X 0.562 IN. (14.28 MM) B 2
–––*–––
7 AN919–5J . . REDUCER, 0.563–18 TO 3.38–24 B 1
8 6784419–4 . . SEAL, 0.688 IN. (17.48 MM) OD B 1
– 8 MS9372–021 . . GASKET, METAL, 0.688 IN. (17.48 MM) OD B ALT
9 6894058 . . RETAINER, SPRING, AIR VALVE B 1
10 6895551 . . SPRING, AIR VALVE B 1
11 6899061 . . PISTON, AIR VALVE B 1
12 6899059 . . BODY, AIR VALVE B 1
13 6784419–2 . SEAL, 0.562 IN. (14.28 MM) OD B 1
14 FIG. REF . VALVE ASSY, SOLENOID, ANTI–ICING, NORMALLY B REF
15 MS21043–3 . NUT, SLFLKG, 0.190–32 B 2
16 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) B 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
17 23001846 . TUBE ASSY, BLEED VALVE, JUMPER B 1

18 23005203 . FITTING, 45°, SPECIAL B 1
19 AN924–4J . NUT, 0.438–20 B 1
– 19 AN924–4K . NUT, 0.438–20 B ALT
21 FIG. REF . VALVE ASSY, COMPRESSOR BLEED B REF
22 MS9217–12 . BOLT, 0.190–32 X 0.875 IN. (22.23 MM) B 3
–––*–––
– 23 23001978 . GASKET, COMPRESSOR SCROLL BLEED PAD B 1
(SB 23005247, PER 250 CEB 75–3006 & 75–3012)
– 23 23005247 . GASKET, COMPRESSOR BLEED PAD B 1
(REF 250 CEB 75–3015) (FRO 23007167)
R – 23 23068249 . GASKET, COMPRESSOR BLEED CRES B 1
(FRO 23007167)
R 23 23007167 . GASKET, COMPRESSOR BLEED PAD B 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 2
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
75-10-00
FIGURE 2
PAGE 3
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30M)

75-10-00
FIGURE 3
PAGE 0
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30M)

75-10-00
FIGURE 3
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30M)
– FIG. REF AIR SYSTEM (REF 72–00–00, FIG. 6) C REF

1 6898979 . TUBE ASSY, ANTI–ICING VALVE TO FRONT SUPPORT C 1
2 6898560 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID C 1
(SB 23064620, PER 250 CEB 72–3209)
2 23064620 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID C 1
3 AN919–2J . REDUCER, 0.438–20 X 0.375–24 C 1
– 3 AN919–2K . REDUCER, 0.438–20 X 0.375–24 C ALT
5 6899080 . VALVE ASSY, AIR C 1
6 MS9217–07 . BOLT, 0.190–32 X 0.562 IN. (14.28 MM) C 2
7 AN919–5J . . REDUCER, 0.563–18 TO 3.375–24 C 1
–––*–––
8 6784419–4 . . SEAL, 0.688 IN. (17.48 MM) OD C 1
– 8 MS9372–021 . . SEAL, 0.688 IN. (17.48 MM) OD C ALT
9 6894058 . . RETAINER, SPRING, AIR VALVE C 1
10 6895551 . . SPRING, AIR VALVE C 1
11 6899061 . . PISTON, AIR VALVE C 1
12 6899059 . . BODY, AIR VALVE C 1
13 6784419–2 . SEAL, 0.562 IN. (14.28 MM) OD C 1
14 FIG. REF . VALVE ASSY, SOLENOID, ANTI–ICING, NORMALLY C REF
OPEN (REF 75–10–00, FIG. 6 FOR DETAILS)
15 MS21043–3 . NUT, SLFLKG, 0.190–32 C 2
16 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) C 2
–––*–––
17 23001822 . TUBE ASSY, AIR, BLEED VALVE TO SOLENOID C 1
18 23001804 . TUBE ASSY, AIR, SOLENOID TO BLEED VALVE C 1
19 MS21043–3 . NUT, SLFLKG, 0.190–32 C 3
– 20 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C 3
20 MS9489–05 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) C ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY

23 23001843 . BRACKET, ANGLE, 90° C 1
24 6844316 . BRACKET, ANGLE, 90° C 1
–––*–––
25 AN804J4 . TEE, 0.438–20 C 1
– 25 AN804K4 . TEE, 0.438–20 C ALT
26 AN924–4J . NUT, 0.438–20 C 1
– 26 AN924–4K . NUT, 0.438–20 C ALT
28 AN929–4J . CAP, 0.250 IN. C 1
– 28 AN919–4K . CAP, 0.250 IN. C ALT
29 FIG. REF . VALVE ASSY, SOLENOID, BLEED VALVE, NORMALLY C REF
OPEN (REF 75–10–00, FIG. 6 FOR DETAIL PARTS)
30 MS21043–3 . NUT, SLFLKG, 0.190–32 C 2
31 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) C 2
–––*–––
32 AN919–2J . REDUCER, 0.438–20 X 0.375–24 C 1
– 32 AN919–2K . REDUCER, 0.438–20 X 0.375–24 C ALT
34 FIG. REF . VALVE ASSY, COMPRESSOR BLEED C REF
35 MS9217–12 . BOLT, 0.190–32 X 0.875 IN. (22.23 MM) C 3
–––*–––
– 36 23005247 . GASKET, COMPRESSOR BLEED PAD C 1
(REF 250 CEB 75–3015) (FRO 23007167)
R – 36 23068249 . GASKET, COMPRESSOR BLEED PAD (FRO 23007167) C 1
R 36 23007167 . GASKET, COMPRESSOR BLEED PAD C 1
37 23005203 . FITTING, 45°, SPECIAL C 1
38 AN924–4J . NUT, 0.438–20 C 1
– 38 AN924–4K . NUT, 0.438–20 C ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 3
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30G/2)

75-10-00
FIGURE 4
PAGE 0
SEP 1/98
AIR SYSTEM (ANTI–ICING & BLEED VALVE) (250–C30G/2)

75-10-00
FIGURE 4
PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY

(250–C30G/2)
– FIG. REF AIR SYSTEM (REF 72–00–00, FIG. 4) F REF

1 6898979 . TUBE ASSY, ANTI–ICING VALVE TO FRONT SUPPORT F 1
2 6898560 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID F 1
(SB 23064620, PER 250 CEB 72–3209)
2 23064620 . TUBE ASSY, ANTI–ICING VALVE TO SOLENOID F 1
3 AN919–2J . REDUCER, 0.438–20 X 0.375–24 F 1
– 3 AN919–2K . REDUCER, 0.438–20 X 0.375–24 F ALT
– 5 6899080 . VALVE ASSY, AIR (REF 250 CEB 75–3008) F 1
6 MS9217–07 . BOLT, 0.190–32 X 0.562 IN. (14.28 MM) F 2
–––*–––
7 AN919–5J . . REDUCER, 0.563–18 TO 3.375–24 F 1
8 6784419–4 . . SEAL, 0.688 IN. (17.48 MM) OD F 1
– 8 MS9372–021 . . SEAL, 0.688 IN. (17.48 MM) OD F ALT
9 6894058 . . RETAINER, SPRING, AIR VALVE F 1
10 6895551 . . SPRING, AIR VALVE F 1
11 6899061 . . PISTON, AIR VALVE (UIA 6899080) F 1
(REF 250 CEB 75–3008)
12 6899059 . . BODY, AIR VALVE (UIA 6899080) F 1
13 6784419–2 . SEAL, 0.562 IN. (14.28 MM) OD F 1
– 13 MS9372–017 . SEAL, 0.562 IN. (14.28 MM) OD F ALT
14 FIG. REF . VALVE ASSY, SOLENOID, ANTI–ICING, NORMALLY F REF
15 MS21043–3 . NUT, SLFLKG, 0.190–32 F 2
16 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) F 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
17 23001846 . TUBE ASSY, BLEED VALVE, JUMPER F 1

18 23005203 . FITTING, 45°, SPECIAL F 1
19 AN924–4J . NUT, 0.438–20 (UW 23003106) F 1
– 19 AN924–4K . NUT, 0.438–20 F ALT
20 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID (UW 23003106) F 1
21 FIG. REF . VALVE ASSY, COMPRESSOR BLEED F REF
22 MS9217–12 . BOLT, 0.190–32 X 0.875 IN. (22.23 MM) F 3
–––*–––
R – 23 23068249 . GASKET, COMPRESSOR BLEED (FRO 23007167) F 1
R 23 23007167 . GASKET, COMPRESSOR BLEED PAD F 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 4
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
COMPRESSOR BLEED VALVE ASSY

FIGURE 5
75-10-00
FIGURE 5
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
5 COMPRESSOR BLEED VALVE ASSY
1 6899135 VALVE ASSY, COMPRESSOR BLEED (BAR STOCK) 1

(R&R 6899269 OR 23001761 OR 23003106, PER
250 CEB 75–3004 OR 75–3005 OR 75–3006)
– 1 6899269 VALVE ASSY, COMPRESSOR BLEED (BAR STOCK) 1
(R&R 23001761 OR 23003106, PER
250 CEB 75–3005 OR 75–3006)
– 1 6899136 VALVE ASSY, COMPRESSOR BLEED (CAST) 1
(R&R 23001762 OR 23003106, PER
250 CEB 75–3005 OR 75–3006)
– 1 23001761 VALVE ASSY, COMPRESSOR BLEED (BAR STOCK) 1
(R&R 23003106, PER 250 CEB 75–3006 & 75–3007)
– 1 23001762 VALVE ASSY, COMPRESSOR BLEED (CAST) 1
(R&R 23003106, PER 250 CEB 75–3006 & 75–3007)
– 1 23003106 VALVE ASSY, COMPRESSOR BLEED 1
(R&R 23004465, PER 250 CEB 75–3009)
(R&R 23003136, PER 250 CEB 75–3009)
– 1 23003136 VALVE ASSY, COMPRESSOR BLEED (FRO 23005456) 1
(R&R 23005366, PER 250 CEB 75–3011)
(REF 75–10–00, FIGS. 1, 2, 3 OR 4, FOR NHA)
– 1 23060205 VALVE ASSY, COMPRESSOR BLEED B 1
– 1 23064598 VALVE ASSY, COMPRESSOR BLEED A 1
(SERV REL TO BOEING C30(HU) APPL ONLY)
2 23001789 . BODY & COVER ASSY, BLEED VALVE (CAST) 1
(UIA 23003136 & 23005456) (REF 250 CEB 75–3007)
– 2 23001788 . BODY & COVER ASSY, BLEED VALVE (BAR STOCK) ALT
(UIA 23003136 & 23005456) (REF 250 CEB 75–3007)
– 2 23005371 . BODY & COVER ASSY, BLEED VALVE (CAST) 1
(UIA 23005366)
– 2 23005370 . BODY & COVER ASSY, BLEED VALVE (BAR STOCK) 1
(UIA 23005366)
– 3 6899088 . . BODY ASSY, INTERMEDIATE (CAST) (UIA 23001789, 1
6899136 & 23001762) (R&R 23005368,
PER 250 CEB 72–3011) (REF 250 CEB 75–3007)
– 3 6899096 . . BODY ASSY, INTERMEDIATE (BAR STOCK) ALT
(R&R 6899267, PER 250 CEB 75–3004)
(UIA 23001788, 6899269 & 23001761)
(R&R 23005369, PER 250 CEB 75–3011)
(REF 250 CEB 75–3007)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
– 3 23005368 . . BODY ASSY, INTERMEDIATE (CAST) (UIA 23005371) 1

(UIA 23005370)
4 6899049 . . . BUSHING 1
5 6899102 . . . COVER, COMPRESSOR BLEED (CAST) 1
(REF 250 CEB 75–3007)
– 5 6899130 . . . COVER, COMPRESSOR BLEED (CAST) ALT
(REF 250 CEB 75–3007)
– 5 6899076 . . . COVER, COMPRESSOR BLEED (BAR STOCK) ALT
(REF 250 CEB 75–3007)
6 AN73–17 . BOLT, 10–32 X 1.906 IN. (48.419 MM) 3
–––*–––
8 6818682–1032 . NUT, SLFLKG, 0.190–32 (FRO 23003113) 1
(REF 250 CEB 75–3007)
– 8 23003113 . NUT, SLFLKG, 0.190–32 (REF 250 CEB 75–3007) 1
9 MS16633–4015 . RING, RETAINING 1
10 6893481 . PLATE, RETAINER 1
11 6893480 . DIAPHRAGM (FRO 6899114) 1
– 11 6899114 . DIAPHRAGM 1
12 6893479 . PISTON, DIAPHRAGM 1
13 6899051 . VALVE 1
14 6893478 . SPRING 1
15 MS9015–04 . PLUG, 0.4375–20 (UIA 6899135, 2
6899269, 6899136, 23001761 & 23001762)
(2 REQD IN 6899135, 6899136, 6899269,
23001761 & 23001762 ASSYS)
17 23003101 . BOLT, AIR PASSAGE, COMPRESSOR BLEED VALVE 1
(REF 250 CEB 75–3007)
18 23001783 . ELBOW, UNIVERSAL, 90°, COMPR BLEED VALVE 1
(REF 250 CEB 75–3007)
(UIA 23003106) (REF 250 CEB 75–3007)
– 20 6893482–1 THRU 20 . ORIFICE, (SB 6899282, PER 250 CEB 75–3005) 2
21 6899282–1 . ORIFICE, BLANK (NO HOLE) (1 REQD 2
IN 23003106) (REF 250 CEB 75–3007)
– 21 6899282–2 . ORIFICE, 0.0265–0.0275 IN. (0.6731–0.6985 MM) AR
– 21 6899282–3 . ORIFICE, 0.0275–0.0285 IN. (0.6985–0.7239 MM) AR
– 21 6899282–4 . ORIFICE, 0.0285–0.0295 IN. (0.7239–0.7493 MM) AR
– 21 6899282–5 . ORIFICE, 0.0295–0.0305 IN. (0.7493–0.7747 MM) AR
– 21 6899282–6 . ORIFICE, 0.0305–0.0315 IN. (0.7747–0.8001 MM) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
– 21 6899282–7 . ORIFICE, 0.0315–0.0325 IN. (0.8001–0.8255 MM) AR

– 21 6899282–8 . ORIFICE, 0.0325–0.0335 IN. (0.8255–0.8509 MM) AR
– 21 6899282–9 . ORIFICE, 0.0335–0.0345 IN. (0.8509–0.8763 MM) AR
– 21 6899282–10 . ORIFICE, 0.0345–0.0355 IN. (0.8763–0.9017 MM). AR
– 21 6899282–11 . ORIFICE, 0.0355–0.0365 IN. (0.9017–0.9271 MM) AR
– 21 6899282–12 . ORIFICE, 0.0365–0.0375 IN. (0.9271–0.9525 MM) AR
– 21 6899282–13 . ORIFICE, 0.0375–0.0385 IN. (0.9525–0.9779 MM) AR
– 21 6899282–14 . ORIFICE, 0.0385–0.0395 IN. (0.9779–1.0033 MM) AR
– 21 6899282–15 . ORIFICE, 0.0395–0.0405 IN. (1.0033–1.0287 MM) AR
– 21 6899282–16 . ORIFICE, 0.0405–0.0415 IN. (1.0287–1.0541 MM) AR
– 21 6899282–17 . ORIFICE, 0.0415–0.0425 IN. (1.0541–1.0795 MM) AR
– 21 6899282–18 . ORIFICE, 0.0425–0.0435 IN. (1.0795–1.1049 MM) AR
– 21 6899282–19 . ORIFICE, 0.0435–0.0445 IN. (1.1049–1.1303 MM) AR
– 21 6899282–20 . ORIFICE, 0.0445–0.0455 IN. (1.1303–1.1557 MM) AR
– 21 6899282–21 . ORIFICE, 0.0455–0.0465 IN. (1.1557–1.1811 MM) AR
– 21 6899282–22 . ORIFICE, 0.0465–0.0475 IN. (1.1811–1.2065 MM) AR
– 21 6899282–23 . ORIFICE, 0.0475–0.0485 IN. (1.2065–1.2319 MM) AR
– 21 6899282–24 . ORIFICE, 0.0485–0.0495 IN. (1.2319–1.2573 MM) AR
– 21 6899282–25 . ORIFICE, 0.0495–0.0505 IN. (1.2573–1.2827 MM) AR
– 21 6899282–26 . ORIFICE, 0.0505–0.0515 IN. (1.2827–1.3081 MM) AR
– 21 6899282–27 . ORIFICE, 0.0515–0.0525 IN. (1.3081–1.3335 MM) AR
– 21 6899282–28 . ORIFICE, 0.0525–0.0535 IN. (1.3335–1.3589 MM) AR
– 21 6899282–29 . ORIFICE, 0.0535–0.0545 IN. (1.3589–1.3843 MM) AR
– 21 6899282–30 . ORIFICE, 0.0545–0.0555 IN. (1.3843–1.4097 MM) AR
– 21 6899282–31 . ORIFICE, 0.0555–0.0565 IN. (1.4097–1.4351 MM) AR
– 21 6899282–32 . ORIFICE, 0.0565–0.0575 IN. (1.4351–1.4605 MM) AR
– 21 6899282–33 . ORIFICE, 0.0575–0.0585 IN. (1.4605–1.4859 MM) AR
– 21 6899282–34 . ORIFICE, 0.0585–0.0595 IN. (1.4859–1.5113 MM) AR
– 21 6899282–35 . ORIFICE, 0.0595–0.0605 IN. (1.5113–1.5363 MM) AR
– 21 6899282–36 . ORIFICE, 0.0605–0.0615 IN. (1.5363–1.5621 MM) AR
– 21 6899282–37 . ORIFICE, 0.0615–0.0625 IN. (1.5621–1.5875 MM) AR
– 21 6899282–38 . ORIFICE, 0.0625–0.0635 IN. (1.5875–1.6129 MM) AR
– 21 6899282–39 . ORIFICE, 0.0635–0.0645 IN. (1.6129–1.6383 MM) AR
21 A 23003102–01 . ORIFICE, BLANK (NO HOLE) (REF 250 CEB 75–3007) AR
– 21 A 23003102–02 . ORIFICE, 0.0265–0.0275 IN. (0.6731–0.6985 MM) AR
– 21 A 23003102–03 . ORIFICE, 0.0275–0.0285 IN. (0.6985–0.7239 MM) AR
– 21 A 23003102–04 . ORIFICE, 0.0285–0.0295 IN. (0.7239–0.7493 MM) AR
– 21 A 23003102–05 . ORIFICE, 0.0295–0.0305 IN. (0.7493–0.7747 MM) AR
– 21 A 23003102–06 . ORIFICE, 0.0305–0.0315 IN. (0.7747–0.8001 MM) AR
– 21 A 23003102–07 . ORIFICE, 0.0315–0.0325 IN. (0.8001–0.8255 MM) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
SEP 1/98
UNITS
1234567 CODE ASSY
– 21 A 23003102–08 . ORIFICE, 0.0325–0.0335 IN. (0.8255–0.8509 MM) AR

– 21 A 23003102–09 . ORIFICE, 0.0335–0.0345 IN. (0.8509–0.8763 MM) AR
– 21 A 23003102–10 . ORIFICE, 0.0345–0.0355 IN. (0.8763–0.9017 MM) AR
– 21 A 23003102–11 . ORIFICE, 0.0355–0.0365 IN. (0.9017–0.9271 MM) AR
– 21 A 23003102–12 . ORIFICE, 0.0365–0.0375 IN. (0.9271–0.9525 MM) AR
– 21 A 23003102–13 . ORIFICE, 0.0375–0.0385 IN. (0.9525–0.9779 MM) AR
– 21 A 23003102–14 . ORIFICE, 0.0385–0.0395 IN. (0.977901.0033 MM) AR
– 21 A 23003102–15 . ORIFICE, 0.0395–0.0405 IN. (1.0033–1.0287 MM) AR
– 21 A 23003102–16 . ORIFICE, 0.0405–0.0415 IN. (1.0287–1.0541 MM) AR
– 21 A 23003102–17 . ORIFICE, 0.0415–0.0425 IN. (1.0541–1.0795 MM) AR
– 21 A 23003102–18 . ORIFICE, 0.0425–0.0435 IN. (1.0795–1.1049 MM) AR
– 21 A 23003102–19 . ORIFICE, 0.0435–0.0445 IN. (1.1049–1.1303 MM) AR
– 21 A 23003102–20 . ORIFICE, 0.0445–0.0455 IN. (1.1303–1.1557 MM) AR
– 21 A 23003102–21 . ORIFICE, 0.0455–0.0465 IN. (1.1557–1.1811 MM) AR
– 21 A 23003102–22 . ORIFICE, 0.0465–0.0475 IN. (1.1811–1.2065 MM) AR
– 21 A 23003102–23 . ORIFICE, 0.0475–0.0485 IN. (1.2065–1.2319 MM) AR
– 21 A 23003102–24 . ORIFICE, 0.0485–0.0495 IN. (1.2319–1.2573 MM) AR
– 21 A 23003102–25 . ORIFICE, 0.0495–0.0505 IN. (1.2573–1.2827 MM) AR
– 21 A 23003102–26 . ORIFICE, 0.0505–0.0515 IN. (1.2827–1.3081 MM) AR
– 21 A 23003102–27 . ORIFICE, 0.0515–0.0525 IN. (1.3081–1.3335 MM) AR
– 21 A 23003102–28 . ORIFICE, 0.0525–0.0535 IN. (1.3335–1.3589 MM) AR
– 21 A 23003102–29 . ORIFICE, 0.0535–0.0545 IN. (1.3689–1.3843 MM) AR
– 21 A 23003102–30 . ORIFICE, 0.0545–0.0555 IN. (1.3843–1.4097 MM) AR
– 21 A 23003102–31 . ORIFICE, 0.0555–0.0565 IN. (1.4097–1.4351 MM) AR
– 21 A 23003102–32 . ORIFICE, 0.0565–0.0575 IN. (1.4351–1.4605 MM) AR
– 21 A 23003102–33 . ORIFICE, 0.0575–0.0585 IN. (1.4605–1.4859 MM) AR
– 21 A 23003102–34 . ORIFICE, 0.0585–0.0595 IN. (1.4859–1.5113 MM) AR
– 21 A 23003102–35 . ORIFICE, 0.0595–0.0605 IN. (1.5113–1.5363 MM) AR
– 21 A 23003102–36 . ORIFICE, 0.0605–0.0615 IN. (1.5363–1.5621 MM) AR
– 21 A 23003102–37 . ORIFICE, 0.0615–0.0625 IN. (1.5621–1.5875 MM) AR
– 21 A 23003102–38 . ORIFICE, 0.0625–0.0635 IN. (1.5875–1.6129 MM) AR
– 21 A 23003102–39 . ORIFICE, 0.0635–0.0645 IN. (1.6129–1.6383 MM) AR
– 21 A 23003102–40 . ORIFICE, 0.0645–0.0655 IN. (1.6383–1.6637 MM) AR
– 21 A 23003102–41 . ORIFICE, 0.0655–0.0665 IN. (1.6637–1.6891 MM) AR
– 21 A 23003102–42 . ORIFICE, 0.0665–0.0675 IN. (1.6891–1.7145 MM) AR
– 21 A 23003102–43 . ORIFICE, 0.0675–0.0685 IN. (1.7145–1.7399 MM) AR
– 21 A 23003102–44 . ORIFICE, 0.0685–0.0695 IN. (1.7399–1.7653 MM) AR
– 21 A 23003102–45 . ORIFICE, 0.0695–0.0705 IN. (1.7653–1.7907 MM) AR
– 21 A 23003102–46 . ORIFICE, 0.0705–0.0715 IN. (1.7907–1.8161 MM) AR
– 21 A 23003102–47 . ORIFICE, 0.0715–0.0725 IN. (1.8161–1.8415 MM) AR

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
SEP 1/98
UNITS
1234567 CODE ASSY
– 21 A 23003102–48 . ORIFICE, 0.0725–0.0735 IN. (1.8415–1.8669 MM) AR

– 21 A 23003102–49 . ORIFICE, 0.0735–0.0745 IN. (1.8669–1.8923 MM) AR
– 21 A 23003102–50 . ORIFICE, 0.0745–0.0755 IN. (1.8923–1.9177 MM) AR
– 21 A 23003102–51 . ORIFICE, 0.0755–0.0765 IN. (1.9177–1.9431 MM) AR
– 21 A 23003102–52 . ORIFICE, 0.0765–0.0775 IN. (1.9431–1.9685 MM) AR
– 21 A 23003102–53 . ORIFICE, 0.0775–9.0785 IN. (1.9685–1.9939 MM) AR
– 21 A 23003102–54 . ORIFICE, 0.0785–0.0795 IN. (1.9939–2.0193 MM) AR
– 21 A 23003102–55 . ORIFICE, 0.0795–0.0805 IN. (2.0193–2.0447 MM) AR
22 6899079 . CLAMP, ADJUSTABLE SCREW 1
23 6899078 . PLATE ASSY, BELLOWS MOUNTING 1
24 AN503–10–10 . SCREW, 0.190–24 X 0.625 IN. (15.88 MM) 4
–––*–––
25 MS171468 . . PIN, SPRING, 0.078 OD X 0.625 (15.88 MM) LG 1
26 6893485 . SCREW, BELLOWS, ADJUSTING, 1
0.164–32 X 0.500 IN. (12.7 MM)
27 6899103 . BELLOWS ASSY (UIA 23003136, 23005456) 1
(SB 6893483, PER 250 CEB 75–3011)
– 27 6893483 . BELLOWS ASSY (UIA 23005366) 1
28 6893484 . SPRING, BELLOWS 1
29 6893488 . DAMPENER, BELLOWS 1
30 6899098 . SCREEN, FILTER 1
31 6818682–1032 . NUT, SLFLKG, 0.190–32 (FRO 23003113) 1
– 31 23003113 . NUT, SLFLKG, 0.190–32 1
32 6893481 . PLATE, RETAINER 1
33 6893480 . DIAPHRAGM (FRO 6899114) 1
– 33 6899114 . DIAPHRAGM 1
34 6893479 . PISTON, DIAPHRAGM 1
35 6899050 . VALVE, POPPET 1
36 6893478 . SPRING 1
37 6895183 . BODY ASSY, COMPRESSOR BLEED VALVE 1
38 6895180 . . BUSHING 1
39 6896194 . SEAT 1
40 193255 . SCREW, NO. 6 X 0.188 IN. (4.76 MM) (FRO 6816237–45) 2
– 40 6816237–45 . SCREW, NO. 6 X 0.188 IN. (4.76 MM) 2
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
SEP 1/98
UNITS
1234567 CODE ASSY
– 41 6872013 . PLATE, IDENT, BLEED CONTROL (SB 6899131) 1

(REF 250 CEB 75–3008)
R – 41 23064046 . PLATE, IDENT, BLEED CONTROL (SB 23073674) 1
R 41 23073674 . PLATE, IDENT, BLEED CONTROL 1
42 MS24621–7 . SCREW, NO. 7 X 0.188 IN. (4.775 MM) 2
–––*–––
43 23003144 . PLUG, NO. 3, VENTED (UIA 23003106 OR 23004465) 1
(R&R 23004826, PER 250 CEB 75–3009)
– 44 23004826 . PLUG, NO. 3 VENTED 1
45 AN924–3D . NUT, 0.375–24 (REF 250 CEB 75–3008) 1
– 45 AN924–3J . NUT, 0.375–24 (REF 250 CEB 75–3008) ALT
– 45 AN924–3K . NUT, 0.375–24 (REF 250 CEB 75–3008) ALT

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 5
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
75-10-00
FIGURE 5
PAGE 7
SEP 1/98
SOLENOID VALVE ASSY ANTI–ICING & BLEED VALVE

FIGURE 6
75-10-00
FIGURE 6
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
6 SOLENOID VALVE ASSY ANTI–ICING & BLEED VALVE
1 6894063 VALVE ASSY, SOLENOID, NORMALLY OPEN 1

(R&R 23007827, PER 250 CEB 75–3013)
R – 1 23007827 VALVE ASSY, SOLENOID, NORMALLY OPEN 1
(REF 75–10–00, FIG. 1 THRU 4, FOR NHA)
2 V105–22 . COIL ASSY (V96487) 1
3 S108A11 . SCREW, NO. 4–48 X 1.6 IN. (40.6 MM) (V96487) 2
–––*–––
4 V5013–172 . VALVE COVER, NAMEPLATE SIDE (V96487) 1
5 V5036–135 . CONNECTOR ASSY (V96487) 1
6 V8515 . SPRING (V96487) 1
7 V113–3 . PLATE (V96487) 1
8 V8503 . PLUNGER (V96487) 1
9 V5002 . DISC. SEAL (V96487) 1
10 V5023–401 . RING, BACKUP (V96487) 1
11 S101AC111 . O–RING (V96487) 1
12 S100–32 . LOCKPIN (V96487) 2
13 V5611 . SEAT (V96487) 2
14 S101AC9 . O–RING (V96487) 2
15 V3920 . BODY (V96487) 1
– 16 MS21043–4 . NUT, SLFLKG, 0.250–28 4
– 17 AN500D4–6 . SCREW, MACHINE 4
– 18 V111–14 . CONNECTOR, SIDE ASSY (V96487) 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 6
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
75-10-00
FIGURE 6
PAGE 2
SEP 1/98
TABLE OF CONTENTS
CHAPTER 77
ENGINE INDICATING SYSTEM
ENGINE INDICATING SYSTEM 77–00

ENGINE INDICATING (TEMPERATURE MEASUREMENT SYSTEM) . . . . . . . . . . . 77–20–00 1
77-CONTENTS
PAGE 1
SEP 1/98
77-CONTENTS
PAGE 2
SEP 1/98
ENGINE INDICATING SYSTEM
77-CHAPTER TITLE
PAGE 1
SEP 1/98
ENGINE INDICATING (TEMPERATURE MEASUREMENT SYSTEM)

FIGURE 1
77-20-00
FIGURE 1
PAGE 0
NOV 15/99
UNITS
1234567 CODE ASSY
1 ENGINE INDICATING
(TEMPERATURE MEASUREMENT SYSTEM)
– FIG. REF TURBINE ASSY, GAS PRODUCER & POWER REF

(REF 72–50–00, FIG 1 OR 2)
– 1 6893077 . THERMOCOUPLE ASSY, TURBINE OUTLET REF
R – 1 23063390 . THERMOCOUPLE ASSY, TURBINE OUTLET REF
R 1 23034927 . THERMOCOUPLE ASSY, TURBINE OUTLET REF
TEMPERATURE GAS PRODUCER
2 MS9060–05 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) REF
R – 3 6718476 . . TERMINAL, ALUMEL, 0.190–32 (DISC.) REF
R – 4 6718477 . . TERMINAL, CHROMEL, 0.164–33 (DISC.) REF
R – 5 6823201–17000 . . SLEEVING, FIBERGLASS BRAID (DISC.) REF
R – 6 6823224–16000 . . SLEEVING, FIBERGLASS BRAID (DISC.) REF
– 7 6874718 . GASKET, TURBINE THERMOCOUPLE (FRO 23053263) REF
7 23053263 . GASKET, THERMOCOUPLE REF
–––*–––
8 6855369 . TERMINAL ASSY, THERMOCOUPLE (SB 23009851) REF
– 8 23009851 . TERMINAL ASSY, THERMOCOUPLE REF
9 MS21043–3 . NUT, 0.190–32 REF
10 AN101006 . BOLT, 0.190–32 X 0.375 IN. (9.53 MM) REF
11 6746974 . . NUT, CHROMEL, 0.164–32 REF
12 6746975 . . NUT, ALUMEL, 0.190–32 REF
–––*–––

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
NOV 15/99
77-20-00
FIGURE 1
PAGE 2
SEP 1/98
TABLE OF CONTENTS
SPARE PARTS SECTION
SPARE PARTS
SPARE PARTS STOCK LEVEL RECOMMENDATIONS . . . . . . . . . . . . . . . . . . . . . . . SPARE PARTS
SPARE PARTS-CONTENTS
PAGE 1
SEP 1/98
SPARE PARTS-CONTENTS
FIGURE 1
PAGE 2
SEP 1/98
SPARE PARTS SECTION
SPARE PARTS-CHAPTER TITLE

PAGE 1
SEP 1/98
SPARE PARTS-CHAPTER TITLE

PAGE 2
SEP 1/98
RECOMMENDED SPARE PARTS – ALL OPERATORS (EXCEPT REMOTE AREAS)
Recommended Quantity For:

Qty/ 1 2–4 5–9 10–15 Effect
Part Number Part Name Eng Eng Engs Engs Engs For Use During Code
AS3084–03 Packing 17 17 17 34 40 Correction of leaks
AS3085–014 Packing 12 3 9 15 30 Oil filter installation
AS3085–126 Packing 1 3 9 15 30 Oil filter installation
MS29512–05 Packing 2 2 2 4 6 Correction of leaks
MS29513–012 Packing 1 2 4 9 15 Fuel filter installation
MS29513–232 Packing 1 2 4 9 15 Fuel filter installation
MS9020–05 Packing 2 2 2 4 6 Correction of leaks
23053993 Gasket 1 1 1 2 3 Correction of leaks
23053996 Gasket 1 1 1 2 3 Lube filter housing
23054602 Gasket 1 1 2 3 4 Correction of leaks
557S6 Packing 1 1 1 2 3 Fuel cont fuel strainer
6784419–2 Seal 1 1 1 2 3 Correction of leaks
MS9372–017 ALT
MS9372–019 ALT
MS9372–21 ALT
MS9372–029 ALT
6870032 Oil Filter Element 1 3 9 15 30 Replacement B
23068245 ALT
6840523 ALT B
6856089 ALT B
6896845 Fuel Filter Element 1 2 4 9 15 Replacement ACDEF
6898947 Oil Filter element 1 3 9 15 30 Replacement ACDEF
23030880 ALT ACDEF
23009677 ALT ACDEF
SPARE PARTS
EFFECT CODE: A = 250–C30 B = 250–C30P C = 250–C30M
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 1
SEP 1/98
RECOMMENDED SPARE PARTS – ALL OPERATORS (REMOTE AREAS)

Qty/ 1 2–4 5–9 10–15 Effect
Part Number Part Name Eng Eng Engs Engs Engs Code
AN101006 Bolt 4 Stock per Operator Discretion
AN804–4J Tee 1 Stock per Operator Discretion ADEF
AN804–4K ALT
AN804J4 Tee 1 Stock per Operator Discretion ACDE
AN804K4 ALT
AN804J5 Tee 1 Stock per Operator Discretion ACDEF
AN804K5 ALT
AN815–4J Union 6 Stock per Operator Discretion
AN815–4K ALT
AN815–5K ALT
AN815–8J Union 2 Stock per Operator Discretion EF
AN815–8K ALT
AN832–4K ALT
AN833–4J Elbow 5 Stock per Operator Discretion
AN833–4K ALT
AN833–8K ALT
AN837–5K ALT
AN837–8K ALT
AN919–2J Reducer 2 Stock per Operator Discretion
AN919–2K ALT
AN919–5J Reducer 1 Stock per Operator Discretion
AN919–5K ALT
AN924–4J Nut 8 Stock per Operator Discretion
AN924–4K ALT
AN924–5K ALT
AN924–6S Nut 1 Stock per Operator Discretion
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 2
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
AN924–8K ALT
AN939D4 Elbow 2 Stock per Operator Discretion
AN960–10L Washer 17 Stock per Operator Discretion
AN960–716 Washer 4 Stock per Operator Discretion
AN960C10L Washer 15 Stock per Operator Discretion
AN960C416L Washer 11 Stock per Operator Discretion
AS3068–14 Nut 1 1 2 3 4 F
AS3084–03 Packing 17 17 17 34 46
AS3084–04 Packing 17 17 17 34 46
AS3084–05 Packing 7 7 7 14 28
AS3084–08 Packing 4 3 3 6 9
AS3085–007 Packing 1 1 1 2 3
AS3085–008 Packing 1 1 1 2 3
AS3085–010 Packing 1 1 1 2 3
AS3085–011 Packing 3 3 3 6 8
AS3085–012 Packing 16 6 6 12 18
AS3085–013 Packing 2 2 4 6 8
AS3085–014 Packing 12 3 9 15 30
AS3085–015 Packing 6 1 1 2 3
AS3085–016 Packing 3 3 3 6 8
AS3085–017 Packing 1 1 1 2 3
AS3085–018 Packing 3 3 3 6 8
AS3085–019 Packing 3 3 3 6 8
AS3085–020 Packing 3 1 1 2 3
AS3085–024 Packing 2 2 4 6 8
AS3085–031 Packing 3 3 3 6 8
AS3085–041 Packing 1 1 1 2 3
AS3085–044 Packing, Front Mag 2 2 4 6 8 F
Seal Rtng Plate
AS3085–111 Packing 3 3 3 6 9
AS3085–113 Packing 2 2 2 4 6
AS3085–116 Packing 1 1 1 2 3
AS3085–123 Packing, 2 2 4 6 8 F
Output Shaft
AS3085–126 Packing 1 3 9 15 30
AS3085–129 Packing 2 2 2 4 6
AS3085–140 Packing 1 1 1 2 3
AS3085–158 Packing 1 1 1 2 3
AS3085–159 Packing 1 1 1 2 3
AS3085–227 Packing 1 1 1 2 3
AS3208–04 Packing 2 2 2 2 4 ABCD
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 3
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
MS122902 Clamp 1 Stock per Operator Discretion
MS21043–3 Nut 261 Stock per Operator Discretion
MS29512–05 Packing 2 2 2 4 6
MS29513–012 Packing 1 2 4 9 15 ACDEF
MS29513–232 Packing 1 2 4 9 15 ACDEF
MS83248/1–122 Packing Stock per Operator Discretion
MS9020–05 Packing 2 2 2 4 6
MS9060–05 Bolt 8 Stock per Operator Discretion
MS9134–01 Gasket 2 2 2 4 6
MS9135–01 Gasket 2 2 2 4 6
MS9193–03 Nipple 1 Stock per Operator Discretion
MS9320–09 Washer 50 Stock per Operator Discretion
MS9320–10 Washer 40 Stock per Operator Discretion
MS9432–05 Bolt, Turbine, S/L 20 Stock per Operator Discretion
MS9555–06 Screw 12 Stock per Operator Discretion
MS9555–07 Screw 12 Stock per Operator Discretion
NAS509–7 Nut 1 Stock per Operator Discretion
23001826 Tube Assy 1 1 1 1 1 AD
23001827 Screen 1 1 1 2 3
23001832 Nozzle Assy 1 1 1 1 2
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 4
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
23004212 Shim, Tabbed AR Stock per Operator Discretion
23005287 Magnetic Chip 2 1 1 1 2
Detector
23005366 Bleed Valve, 1 1 1 1 1
Compressor
23007167 Gasket 1 1 1 1 2
23007826 Valve Assy, N2 1 0 0 1 1
Overspeed
23007827 Valve Assy, Solenoid, 2 0 0 1 1
Normally Open
23007979 Pickup Assy 1 1 1 1 2 2 ACDEF
23007980 Pickup Assy 1 1 1 1 2 2 B
23007981 Pickup Assy 1 1 1 1 2 2 ACD
23008036 Tube Assy 1 1 1 1 1 B
23009568 Adapter 2 1 1 1 2 AD
23009851 Terminal 1 1 1 2 3
23031494 Gasket 1 1 1 1 2
23031507 Washer 6 Stock per Operator Discretion
23033862 Seal 1 0 0 0 1
23033400 PC Air Filter 1 Stock per Operator Discretion
23035128 Turbine Assy 1 0 0 1 1 ABCDE
23035178 Gearbox 1 0 0 1 1 B
23035181 Gearbox 1 0 0 1 1 C
23035275 Tube Assy 1 1 1 1 1
23039030–02 Clamp 2 Stock per Operator Discretion
23039030–10 Clamp AR Stock per Operator Discretion
23039782 Gearbox 1 0 0 1 1 E
23050886 Harness Assy 1 0 0 1 1 ADE
23050887 Harness Assy 1 0 0 1 1 C
23050888 Harness Assy 1 0 0 1 1 B
23051643 Compressor Assy 1 0 0 1 1 ABCD
23053263 Gasket,Thermocouple 4 4 4 8 8
23053333 Gearbox 1 0 0 1 1 AD
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 5
NOV 1/00

Qty/ 1 2–4 5–9 10–15 Effect
23053393 Gasket 1 1 1 2 3
23053960 Gearbox Assy 1 1 1 1 1 F
23053968 Magnetic Carbon Seal 2 2 4 6 8 F
23053993 Gasket 1 1 2 3 4
23053996 Gasket 1 1 1 2 3
23054053 Control, N2 Overspeed1 1 1 1 1 AD
23054602 Gasket, Fuel Pump 1 1 2 3 4
23056635 Compressor Assy 1 1 1 1 1 EF
23069706 Tube Assy 1 1 1 1 1 B
23058131 Bearing 1 0 0 0 0
23062032 Turbine Assy 1 0 0 1 1 F
23062087 Valve 1 0 0 1 1
23062752 Shield Assy 1 1 1 1 2
23063390 Thermocouple 1 1 1 1 2
23064612 Tube Assy 2 1 1 1 1
23064620 Tube Assy 1 1 1 1 1
23065126 Governor 1 0 0 1 1 C
23065127 Governor 1 0 0 1 1 E
23065128 Governor 1 1 1 1 1 F
23065147 Fuel Control Assy 1 1 1 1 1
23065569 Tube Assy 1 1 1 1 1 ADEF
23065813 Tube Assy 1 1 1 1 1 C
23065814 Tube Assy 1 1 1 1 1 B
23066675 Liner Assy 1 0 0 1 1
23068215 Reducer 1 Stock per Operator Discretion
54701 Connector 2 2 2 4 6
557S6 Packing 1 Stock per Operator Discretion
MS9351–02 ALT
MS9351–06 ALT
6746974 Nut, Chromel 1 1 1 2 3
6746975 Nut, Chromel 1 1 1 2 3
6871534 Magnetic Plug 2 0 0 1 1
6784419–2 Seal 1 1 1 2 3
MS9372–017 ALT
6784419–3 Seal 1 1 1 2 3
MS9372–019 ALT
6784419–4 Seal 1 1 1 1 3
MS9372–21 ALT
6784419–8 Seal 4 4 4 8 12
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 6
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
MS9372–029 ALT
6820055–7 Screw 7 Stock per Operator Discretion
6823260 Spacer 2 Stock per Operator Discretion
6848996–1 –2, –3 Washer AR 1 1 1 1
–4 or 5
6850314 Bolt 4 Stock per Operator Discretion
6851354 Accumulator 1 1 1 1 2 ACD
6854086 Seal 2 2 2 4 6 ABCDE
6854255 Drain Valve 2 1 1 1 2
6854424 Seal 8 4 4 8 12
6854521 Seal 2 1 1 2 3
6864045–02 Clip, Inner 11 Stock per Operator Discretion
6864046–02 Clip, Outer
6864045–06 Clip, Inner 3 Stock per Operator Discretion
6864046–06 Clip, Outer
6864061–04 Bushing 4 Stock per Operator Discretion
6866501 Damper 6 2 2 4 6
6870032 Oil Filter Element 1 3 9 15 30 B
23068245 ALT
6840523 ALT
6856089 ALT
6870885 Exciter Assy 2 0 0 1 1
6870891 ALT
6895573 ALT
6899093 ALT
6871162 Shim AR 10 10 20 30
23004212 ALT
23008001 ALT
23008002 ALT
6871937 Tube Assy 1 1 1 1 1
6875224 Accumulator 1 1 1 1 2 4 ABDEF
6889096 Piston Ring 1 1 1 1 2 4
6889347 Ring, Teflon 2 2 2 4 4
6890578 Tube Assy 1 1 1 1 1
6890580 Tube Assy 1 1 1 1 1
6890581 Tube Assy 1 1 1 1 1 B
6890583 Tube Assy 1 1 1 1 1 ABCD
6890584 Tube Assy 1 1 1 1 1 ABCD
6890586 Tube Assy 1 1 1 1 1
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 7
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
6891634 Tube Assy 1 1 1 1 1
6892826 Fitting 1 Stock per Operator Discretion
6892836 Tube Assy 1 1 1 1 1
6892846 Tube Assy 1 1 1 1 1
6893015–1 Orifice 1 1 1 1 2
6893072 Tube Assy 1 1 1 1 1
6893073 Tube Assy 1 1 1 1 1
6893282 Igniter Lead LH 1 0 1 1 1 ACDE
23060815 ALT
6893283 Igniter Lead LH 1 0 1 1 1 ABDE
23060816 ALT
6893647 Seal 1 0 0 1 1
6894080 Fuel Pump 1 0 0 1 1 B
23065133 ALT
23070460 ALT
6896822 ALT
6895090 Housing Assy 1 0 0 1 2
6895805 Washer 2 2 2 4 6
6895832 Tube Assy 1 1 1 1 1 AD
6896344 Fuel Pump 1 0 0 1 1 ACDEF
23065134 ALT
23070461 ALT
6896810 ALT
6896449 Tube Assy 1 1 1 1 1 ACDEF
6896451 Tube Assy 1 1 1 1 1
6896845 Fuel Filter Element 1 2 4 9 15 ACDEF
6898657 Ring 2 2 2 4 6
6898825 Tube Assy 1 1 1 1 1
6898840 Check Valve 1 0 1 1 1
6898930 Spacer AR Stock per Operator Discretion
6898947 Oil Filter 1 3 9 15 30 ACDEF
23030880 ALT
23009677 ALT
6898976 Tee 1 Stock per Operator Discretion
6898979 Tube Assy 1 1 1 1 1 ACDEF
6899001 Fuel Injector 1 1 1 2 3
6899080 Valve Assy 1 0 0 1 1
6899084 Igniter 2 0 0 1 1
6899085 ALT
6899191 Tube Assy 1 1 1 1 1 AD
6899208 Tube Assy 1 1 1 1 1
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 8
SEP 1/98

Qty/ 1 2–4 5–9 10–15 Effect
6899408 Washer AR Stock per Operator Discretion
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 9
SEP 1/98
SPARE PARTS
D = 250–C30S E = 250–C30G F = 250–C30G/2
PAGE 10
SEP 1/98
TABLE OF CONTENTS
KIT SECTION
KITS
KIT SECTION KITS

KITS – NOT ILLUSTRATED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KITS 1
KITS-CONTENTS
PAGE 1
SEP 1/98
KITS-CONTENTS
PAGE 2
SEP 1/98
KITS
KITS-CHAPTER TITLE
PAGE 1
SEP 1/98
KITS – NOT ILLUSTRATED

FIGURE 1
KITS
FIGURE 1
PAGE 0
SEP 1/98
UNITS
1234567 CODE ASSY
1 KITS – NOT ILLUSTRATED
– 1 23051142 KIT, ELECTRONIC N2 OVERSPEED CONTROL SYSTEM A 1

INSTALLATION (250–C30(HU))
(UIA 23009300 ENGINE ASSY)
– 1 23054053 . CONTROL ASSY, N2 OVERSPEED A 1
– 1 23031507 . WASHER, VIBRATION DAMPER A 6
– 1 6866501 . DAMPER, VIBRATION A 6
– 1 MS9489–20 . BOLT, 0.190–32 X 1.0625 IN. (26.988 MM) A 3
– 1 AN960–10L . WASHER, FLAT, 0.190 IN. (4.83 MM) ID A 3
– 1 MS35333–73 . LOCKWASHER A 1
– 1 23039043 . SPACER, 0.218 IN. ID X 0.0625 IN. OD A 3
X 0.250 IN. (5.54 X 15.88 X 6.35 MM)
– 1 23007826 . VALVE, SHUTOFF, NORMALLY CLOSED A 1
– 1 6890586 . TUBE ASSY, PY SOL. VALVE TEE TO PT GOV A 1
– 1 6891634 . TUBE ASSY, PY CONTROL TO SOL. VALVE A 1
– 1 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) A 2
– 1 MS21043–3 . NUT, 0.190–32 A 2
– 1 AN804–4J . TEE, 0.4375–20 A 1
– 1 AN804–4K . TEE, 0.4375–20 A ALT
– 1 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID A 1
– 1 AN924–4J . NUT, 0.4375–20 A 1
– 1 AN924–4K . NUT, 0.4375–20 A ALT
– 2 23051140 KIT, ELECTRONIC N2 OVERSPEED CONTROL SYSTEM B 1

INSTALLATION (250–C30P)
– 2 MS9320–09 . WASHER, FLAT, 0.190 IN. (4.83 MM) ID B 2
– 2 23007980 . PICKUP ASSY, N2 RPM B 1
– 2 23007826 . VALVE, SHUTOFF, NORMALLY CLOSED B 1
– 2 6890586 . TUBE ASSY, PY SOLENOID VALVE TEE TO PT GOV B 1
– 2 6891634 . TUBE ASSY, PY CONTROL TO SOLENOID VALVE B 1
– 2 AN804–4J . TEE, 0.4375–20 B 1
– 2 AN804–4K . TEE, 0.4375–20 B ALT

CODE EXPLANATION: KITS
A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 1
SEP 1/98
UNITS
1234567 CODE ASSY
– 2 AN924–4J . NUT, 0.4375–20 B 1

– 2 AN924–4K . NUT, 0.4375–20 B ALT
– 2 23054053 . CONTROL ASSY, N2 OVERSPEED B 1
– 2 23031507 . WASHER, VIBRATION DAMPER B 6
– 2 6866501 . DAMPER, VIBRATION B 6
– 2 AN960–10L . WASHER, FLAT, 0.190 IN. (4.83 MM) ID B 3
– 2 MS9489–20 . BOLT, HEX HD, 0.190–32 X 0.625 IN. (26.988 MM) B 3
– 2 MS35333–73 . WASHER, LOCK B 1
– 2 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) ID B 2
– 2 MS21043–3 . NUT, 0.190–32 B 2
– 2 23039043 . SPACER, 0.218 IN. ID X 0.0625 IN. OD B 3
X 0.250 IN. (5.54 X 15.88 X 6.35 MM)
– 3 23051145 KIT, ELECTRONIC N2 OVERSPEED CONTROL SYSTEM C 1

INSTALLATION (250–C30M)
– 3 23007826 . VALVE, SHUTOFF, NORMALLY CLOSED C 1
– 3 6890586 . TUBE ASSY, PY SOLENOID VALVE TEE TO PT GOV C 1
– 3 6891634 . TUBE ASSY, PY CONTROL TO SOLENOID VALVE C 1
– 3 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) C 2
– 3 MS21043–3 . NUT, 0.190–32 C 2
– 3 AN804–4J . TEE, 0.4375–20 C 1
– 3 AN804–4K . TEE, 0.4375–20 C ALT
– 3 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID C 1
– 3 AN924–4J . NUT, 0.4375–20 C 1
– 3 AN924–4K . NUT, 0.4375–20 C ALT
– 3 23054053 . CONTROL ASSY, N2 OVERSPEED C 1
– 3 23031507 . WASHER, VIBRATION DAMPER C 6
– 3 6866501 . DAMPER, VIBRATION C 6
– 3 AN960–10L . WASHER, FLAT, 0.190 IN. (4.83 MM) ID C 3
– 3 MS9489–20 . BOLT, 0.190–32 X 0.625 IN. (26.988 MM) C 3
– 3 MS35333–73 . WASHER, LOCK C 1
– 3 23039043 . SPACER, 0.218 IN. ID X 0.0625 IN. OD C 3
X 0.250 IN. (5.54 X 15.88 X 6.35 MM)

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 2
SEP 1/98
UNITS
1234567 CODE ASSY
– 4 23058108 KIT, HEATER, FUEL CONTROL BF AR

– 4 6875709 . VALVE ASSY, SHUTOFF BF 1
– 4 23053286 . PLUG, DUMMY IGNITER BF 1
– 4 23058112 . TUBE ASSY, DUMMY IGNITER PLUG TO BF 1
BULKHEAD FITTING
– 4 23057782 . TUBE ASSY, SHUTOFF VALVE TO FUEL BF 1
CONTROL Pc HEATER
– 4 23060409 . TUBE ASSY, AIR–FUEL CONTROL HEATER BF 1
– 4 23056649 . HOSE ASSY, FUEL BF 1
– 4 AN832–4J . UNION, 0.4375–20 BF 1
– 4 AN832–4K . UNION, 0.4375–20 BF ALT
– 4 AN924–4J . NUT, 0.4375–20 BF 1
– 4 AN924–4K . NUT, 0.4375–20 BF ALT
– 4 AN960–716 . WASHER, 0.4375 IN. (11.11 MM) ID BF 2
– 4 AN815–4J . UNION, 0.4375–20 BF 1
– 4 AN815–4K . UNION, 0.4375–20 BF ALT
– 4 AS3084–04 . PACKING, 0.351 IN. (8.92 MM) ID BF 1
– 4 AN101009 . BOLT, 0.190–32 X 0.562 IN. (14.28 MM) BF 1
– 4 23039030–03 . CLAMP, CUSHIONED, 0.250 IN. (6.35 MM) ID BF 1
– 4 23064625 . TUBE ASSY, FUEL CONTROL TO PUMP BYPASS BF 1
– 4 23058109 . BRACKET, 0.190 X 0.438 IN. (4.83 X 11.13 MM) BF 1
(CAN BE REWORKED FROM 6854056 BRACKET)
– 4 AN960C416L . WASHER, FLAT BF 2
R – 5 23053308 KIT, NO. 1 ROLLER BEARING AR

– 5 23066716 . BEARING, ROLLER, FRONT COMPRESSOR 1
– 5 23066715 . PIN, HEADED, 0.125 DIA X 0.200 IN. LG 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 3
NOV 15/99
UNITS
1234567 CODE ASSY
– 6 23006582 KIT, NO. 2–1/2 ROLLER BEARING ABCD AR

– 6 6726656–168 . RING, RETAINING ABCD 1
– 6 6726656–96 . RING, RETAINING ABCD 1
– 6 23007202 . BEARING, ROLLER ABCD 1
– 6 6871060 . BEARING, ROLLER ABCD ALT
– 6 23005271 . ADAPTER, SPLINED COUPLING ABCD 1
– 6 23005273 . SPACER ABCD 1
– 6 23005274 . RING, PISTON SEAL ABCD 1
– 6 23073520 . GEARSHAFT ASSY ABCD 1
– 6 AS3085–018 . PACKING ABCD 1
– 6 6823169 . NUT, HEX, 0.250–28 ABCD 1
– 6 23073667 . PLATE, IDENTIFICATION, GEARBOX ABCD 1
– 6 23073665 . PLATE, IDENTIFICATION, COMPRESSOR ABCD 1
R – 7 23008254 KIT, COMPRESSOR, NO. 2–1/2 ROLLER BEARING ABD AR

– 7 AS3085–018 . PACKING ABD 1
– 7 23005271 . ADAPTER, SPLINED COUPLING ABD 1
– 7 23005274 . RING, PISTON SEAL ABD 1
– 7 23073520 . GEARSHAFT ASSY, SPUR ADAPTER ABD 1
– 7 6726656–96 . RING, RETAINING ABD 1
– 7 6823169 . NUT, HEX, 0.250–28 ABD 1
– 7 23073665 . PLATE, COMPRESSOR, IDENTIFICATION ABD 1
R – 8 23008255 KIT, GEARBOX, NO. 2–1/2 ROLLER BEARING ABD AR

– 8 23005273 . SPACER ABD 1
– 8 6726656–168 . RING, RETAINING ABD 1
– 8 23007202 . BEARING, ROLLER ABD 1
– 8 6871062 . BEARING, ROLLER ABD ALT
– 8 23073667 . PLATE, IDENTIFICATION, GEARBOX ABD 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 4
DEC 15/01
UNITS
1234567 CODE ASSY
– 9 23062006 KIT, POWER TURBINE GOVERNOR LOCKOUT B AR

– 9 AN804–4J . TEE, FLARED TUBE, W/ BULKHEAD ON RUN B 1
– 9 AN804–4K . TEE, FLARED TUBE, W/ BULKHEAD ON RUN B ALT
– 9 AN833–4J . ELBOW, FLARED TUBE & BULKHEAD UNIV 90 B 1
– 9 AN833–4K . ELBOW, FLARED TUBE & BULKHEAD UNIV 90 B ALT
– 9 AN924–4J . NUT, 0.4375–20 B 2
– 9 AN924–4K . NUT, 0.4375–20 B ALT
9 6844317 . BRACKET, ANGLE, 90° B 1
– 9 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) B 1
– 9 MS21043–3 . NUT, SLFLKG, 0.190–32 B 3
– 9 23007826 . VALVE ASSY, SHUTOFF NORMALLY CLOSED B 1
– 9 AN101024 . BOLT, 0.190–32 X 1.500 IN. (38.1 MM) B 2
– 9 6886430E150C . HOSE ASSY, TEFLON – CODED CONFIGURATION B 1
NOTE: THE FOLLOWING KIT IS RELEASED FOR

250–C30(HU) ENGINES INSTALLED IN BOEING 530F
AIRCRAFT. ALSO SERV EVALUATION PER RFSE
250–96–10 FOR 250–C30M (AS350) ENGINES.
– 10 23066663 KIT, ACCUMULATOR, BLEED VALVE AC 1

(REF 250 CEB 72–3213 ON BOEING C30(HU))
– 10 23069705 . ACCUMULATOR, 6 CU IN. AC 1
– 10 23039030–27 . CLAMP, CUSHIONED, 0.500 IN. (12.7 MM) ID AC 1
R – 10 23065484 . TUBE ASSY, AIR, ACCUMULATOR TO BLEED VALVE AC 1
SOLENOID
R – 10 23065489 . TUBE ASSY, AIR, BLEED VALVE TO ACCUMULATOR AC 1
– 10 23065552 . BRACKET, ACCUMULATOR AC 1
– 10 AN815–4J . UNION, 0.4375–20 AC 2
– 10 AN815–4K . UNION, 0.4375–20 AC ALT
– 10 AN939D4 . ELBOW, 0.4375–20 AC 1
– 10 AN101008 . BOLT, 0.190–32 X 0.500 IN. (12.7 MM) AC 1
– 10 AS3084–04 . PACKING, 0.351 IN. (8.915 MM) ID AC 3
– 10 MS21043–3 . NUT, SLFLKG, 0.190–32 AC 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 5
DEC 15/01
UNITS
1234567 CODE ASSY
NOTE: THE FOLLOWING KIT IS RELEASED PER

250–C30 IB 3001, FUEL FLOWMETER KIT.
– 11 6899202 KIT, FUEL FLOWMETER INSTALLATION AD 1

– 11 6899238 . BRACKET, FLOWMETER SUPPORT AD 1
– 11 6879880E123C . HOSE ASSY, FUEL CONTROL TO FLOWMETER AD 1
– 11 6879880E167F270 . HOSE ASSY, FLOWMETER TO FUEL INJECTOR AD 1
– 11 MS9432–08 . BOLT, 0.190–32 X 0.625 IN. (15.85 MM) AD 2
– 11 MS9432–10 . BOLT, 0.190–32 X 0.750 IN. (19.05 MM) AD ALT
– 11 MS9432–11 . BOLT, 0.190–32 X 0.812 IN. (20.625 MM) AD ALT
NOTE: THE FOLLOWING KIT IS RELEASED FOR

BOEING 250–C30(HU).
– 12 23050844 KIT, Pc FILTER RELOCATION (BOEING 250–C30(HU)) A 1

– 12 AN101007 . BOLT, 0.190–32 X 0.438 IN. (11.13 MM) A 3
– 12 MS21043–3 . NUT, 0.190–32 A 3
– 12 MS9593–198 . BRACKET, ANGLE, 90° A 1
– 12 MS9593–074 . BRACKET, ANGLE, 90° A 1
– 12 23039030–03 . CLAMP, CUSHIONED, 0.250 IN. (6.35 MM) ID A 2
– 12 23007164 . BRACKET, Pc FILTER A 1
– 12 23033885 . TUBE ASSY, Pc FILTER TO GOVERNOR A 1
– 13 23004544 KIT, Pc FILTER ASSY (REF 250 CEB 73–3004) A 1

– 13 23065569 . TUBE ASSY, SCROLL TO GOVERNOR Pc TEE A 1
– 13 23001987 . TUBE ASSY, Pc FILTER TO GOVERNOR A 1
– 13 23033400 . FILTER ASSY, Pc A 1
– 13 23033422 . FILTER ASSY, Pc A ALT
13 MS9593–052 . BRACKET, ANGLE, 90° A 1
– 14 23069740 KIT, OIL CHECK VALVE 1

R – 14 23062087 . VALVE, CHECK, LUBE OIL 1
R – 14 23074872 . VALVE, CHECK, LUBE OIL ALT
R – 14 MS122911 . CLAMP, 0.812 IN. (20.62 MM) ID 1
(NOT USED IN C30 ENGINES)
R – 14 GT11768 . WARNING TAG 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 6
DEC 15/01
UNITS
1234567 CODE ASSY
– 15 23072620 KIT, TURBINE OVERHAUL, SERIES IV AR

– 15 6840407 . NUT, SPANNER 1
– 15 23001801 . NUT, COUPLING, POWER TURBINE, OUTER 1
– 15 23030982 . NUT, COUPLING, POWER TURBINE, INNER, LH 1
– 15 6898657 . RING, SEAL, COMPRESSOR DISCHARGE TUBE 2
– 15 6889096 . RING, PISTON, SPLIT SEAL 4
– 15 6889347 . RING, PISTON, SEAL 2
– 15 6784419–3 . SEAL, ,METALLIC O–RING 1
– 15 6784419–8 . SEAL, ,METALLIC O–RING 4
– 15 23053263 . GASKET, TURBINE THERMOCOUPLE 4
– 15 23009573 . PLUG, POSITIONING, TURBINE NOZZLE SHIELD 2
– 15 6841676 . GASKET, METALLIC RING 1
– 15 6896408 . NUT, SPLINE LOCK 1
– 15 23008030 . BOLT, TIE, TURBINE 1
– 15 6840406 . NUT, SPANNER, TURBINE TIE 1
– 15 23053299 . WHEEL, TURBINE, 1ST STAGE 1
– 15 23032280 . WHEEL, TURBINE, 2ND STAGE 1
– 15 6875350 . GASKET, METALLIC U–RING 1
– 15 6893603 . GASKET, METALLIC U–RING 1
– 16 23069756 KIT, COMPRESSOR MODULE INSTALLATION AR

R – 16 6851501–57 . PACKING, 3.176 IN. (80.67 MM) ID 1
– 16 6784419–2 . SEAL, 0.562 IN. (14.28 MM) OD 1
– 16 23007167 . GASKET, COMPRESSOR BLEED, PAD 1
– 16 23009312 . GASKET, VENT TUBE 2

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 7
DEC 15/01
UNITS
1234567 CODE ASSY
– 17 23069757 KIT, TURBINE MODULE INSTALLATION AR

– 17 6889347 . RING, PISTON SEAL 2
– 17 6898657 . RING, SEAL, COMPRESSOR DISCHARGE TUBE 2
R – 18 23069740 KIT, OIL CHECK VALVE 1

R – 18 23062087 . VALVE, CHECK, LUBE OIL 1
R – 18 23074872 . VALVE, CHECK, LUBE OIL ALT
R – 18 MS122911 . CLAMP, 0.812 IN. (20.62 MM) ID (NOT USED IN C28) 1
R – 18 GT11768 . WARNING TAG 1

A = 250–C30 B = 250–C30P C = 250–C30M FIGURE 1
D = 250–C30S E = 250–C30G F = 250–C30G/2 PAGE 8
DEC 15/01

14W4 Ipc Motor Rev 3 15dic2001

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

14W4 Ipc Motor Rev 3 15dic2001

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

14W4 Ipc Motor Rev 3 15dic2001

Uploaded by

Copyright:

Available Formats

Engine Illustrated Parts Catalog

Fourteenth Edition 1 September 1998 250–C30

Proprietary rights legend

E2000 Rolls–Royce Corporation

Revision Number Date

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

LIST OF EFFECTIVE PAGES 1 DEC 15/01 20 DEC 15/01

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

34 DEC 15/01 72–00–00, FIG. 2 0 NOV 15/99

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

2 DEC 15/01 72–60–00, FIG. 2 0 SEP 1/98

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

72–60–00, FIG. 10 0 NOV 15/99 73–10–00, FIG. 3 0 SEP 1/98

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

2 DEC 15/01 73–21–00, FIG. 6 0 SEP 1/98

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

CHAP–SECT–SUBJ PAGE DATE CHAP–SECT–SUBJ PAGE DATE

2 SEP 1/98 SPARE PARTS– 1 SEP 1/98

LIST OF EFFECTIVE PAGES

LIST OF EFFECTIVE PAGES

LIST OF COMMERCIAL ENGINE BULLETINS (CEB’S)

INTRODUCTION (EXPLANATION OF HOW TO USE THE CATALOG)

LIST OF VENDOR CODES, NAMES, AND ADDRESSES

LIST OF VENDOR COMPONENT MANUALS

DETAILED PARTS LISTS

THIS PAGE INTENTIONALLY LEFT BLANK

72–00–00 Engine Assembly

73 ENGINE FUEL SYSTEM

73–10–00 Engine Fuel System

74 ENGINE IGNITION SYSTEM

75 ENGINE AIR SYSTEM

75–10–00 Anti–Icing & Bleed Air

77 ENGINE INDICATING SYSTEM

77–20–00 Temperature Measurement System

SPARE PARTS SPARE PARTS

SPARE PARTS Recommended Spare Parts

KITS KIT SECTION

THIS PAGE INTENTIONALLY LEFT BLANK

F. UNITS PER ASSY COLUMN

E. Complete unit and model identification (from option plate).

F. TYPE rather than WRITE the required information.

H. To place an order, contact Aviall, Inc. via:

Fax: USA 1–800–329–2842

Phone: USA 1–800–284–2551

6. HOW TO USE THE ILLUSTRATED PARTS CATALOG (SEE FIGURE 1)

HOW TO USE THE ILLUSTRATED PARTS CATALOG

ORIENTATION VIEW OF ENGINE