e-ISSN: 2582-5208

International Research Journal of Modernization in Engineering Technology and Science

( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:05/Issue:12/December-2023 Impact Factor- 7.868 www.irjmets.com

EXPERIMENTAL DESIGN OF FREE ENERGY GENERATOR BY USING

NEODYMIUM MAGNETS
Lakshman Datta SN*1, Preetham GL*2
*1,2Lecturer, Dept Of Mechanical Engineering, Vidhyavardhaka Polytechnic, Mysuru, Karnataka, India.
ABSTRACT
In the modern world, energy is required for nearly everything. It's exceedingly difficult to envision existence
without electric lights, without TVs, cells, PC and PCs and then some. Energy is consumed by pretty much every
gadget that makes your life more straightforward and more agreeable. It is additionally required by lifesaving
gadgets, like heart defibrillators, nebulizers and an uncountable host of different things.
To put it plainly, without energy, current life would be incomprehensible. Nonetheless, all of that energy
includes some major disadvantages. Truth be told, the New World was investigated by man utilizing wind-
controlled ships as it were. The nonconventional sources are accessible at liberated from cost, contamination
free and unlimited. Man has involved these hotspots for a long time in moving boats, driving windmills for
crushing corn and siphoning water, and so on Due to the helpless innovations then, at that point, existing; the
expense of tackling energy from these sources was very high. Today we principally utilize petroleum products
to drive our homes. It's helpful to utilize coal, oil, and gaseous petrol for meeting our energy needs; however we
have a restricted inventory of these powers on the Earth. We're utilizing them significantly more quickly than
they are being made. In the end, they will run out. What's more a direct result of wellbeing concerns and
garbage removal issues, the United States will resign a lot of its atomic limit by 2020. Meanwhile, the country's
energy needs are relied upon to develop by 33% during the following 20 years. It utilizes the extremely durable
attractive field of the magnets to create the necessary power to move the engine. This idea of creating attractive
field from the super durable magnets became functional solely after presenting Neodymium magnets which are
a lot of force full than the past Ferrite magnets. The principal advantage is that it doesn't need consistent
electric stock. These attractive energy gadgets give contamination free energy and they won't drain our regular
assets.
Keywords:, Investigation, Research, Design, Meshing, Modeling, Analysis.
I. INTRODUCTION
In this project, the main purpose of this project is to carry out an investigation to prove the free energy magnet
motor by understanding new science doctrines of free energy theories. Permanent Magnets have continuous
power.

This should be obvious as one will support its own weight on the vertical face of a refrigerator, for years on end.
Conventional science says that permanent magnets can`t be used as a source of power. However, the reality is
that conventional science just doesn`t know the techniques necessary for extracting that power. The author
stated that permanent magnets has continuous power that were disclaimed by conventional science century
year ago as the energy (i.e. work) is only done when something actually moves against as a result of force. The
energy cannot be extracted without there is being motion. The Law of Conservative of Energy has also clearly
stated that the idea of no more energy coming out of a system than goes into it.

www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science

[3795]
 e-ISSN: 2582-5208
International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:05/Issue:12/December-2023 Impact Factor- 7.868 www.irjmets.com
II. METHODOLOGY
Gathering the source

Literature review

Developing the simple prototype

Testing the prototype

Outline Results

Conclusion
Figure as shown above is the process of planning for the project regarding free energy magnet generation.
Firstly wide variety of information has to be collected and filtered in literature survey. The gathered sources are
more related to the free energy generator. After literature review we justify the basic principles and theory of
free energy behind the properties of permanent magnet, on the other hand simple prototype can be developed
based on some study and theory of free energy. Further improvement and adjustment of prototype can be
applied before testing the prototype; simultaneously the testing of prototype is to be done. Eventually the test
result is outline and further to be studied. Lastly a conclusion will be presented to conclude the free energy
generator
III. MODELING AND ANALYSIS
The basic model of free energy generator consists of the following components:
Set of Neodyium Magnets
Small CPU Fan.
The basic invention involves the balancing of the magnetic forces of attraction and repulsion. This is achieved
by having a plurality of interconnected primary magnets with the polarities of the rotatory movable secondary
magnets so that the force of magnetic attraction in one direction parallel to the given path of rotatory
movement are substantially equal to the forces of magnetic repulsion in the opposite direction parallel to the
given path. This arrangement results in a minimization of the energy required to produce rotatory movement in
the given path between the primary and secondary magnets.

CPU Fan Rotor and Stator of CPU Fan

www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science

[3796]
 e-ISSN: 2582-5208
International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:05/Issue:12/December-2023 Impact Factor- 7.868 www.irjmets.com

Copper Windings of CPU Rotor

Considerable development effort has been expended over the years on the rotary version, but no tangible
evidence has been reported, and specifically on a cost/effective version of this rotary unit. The early reports of
high output yields and practical operation are believed to be public relations hype, and exaggerations of basic
performance data.
In this model, where there is a stationary “stator” and a rotating “rotor”. It should be realized that the
arrangement of magnets on the “stator” do not necessarily have to be stationary. Some motor designs do not
have a stator, but instead have two or more rotors. This allows the magnets which would have been on the
stator to be in position to provide thrust to the output rotor, and then move out of the way so as not to retard
the rotor movement.
In this model, where there is a stationary “stator” and a rotating “rotor”. It should be realized that the
arrangement of magnets on the “stator” do not necessarily have to be stationary. Some motor designs do not
have a stator, but instead have two or more rotors. This allows the magnets which would have been on the
stator to be in position to provide thrust to the output rotor, and then move out of the way so as not to retard
the rotor movement.

Neodymium Magnets
The magnet poles form a dipole which causes a continuous flow of energy drawn from the quantum foam of our
universe, and that flow continues until such time as the dipole is destroyed. The energy which powers any
permanent magnet motor comes directly from the zero-point energy field and not actually from the magnet
itself. A piece of iron can be converted into a magnet by a single nanosecond magnetic pulse. It makes no sense
that a pulse of that duration could provide months of continuous power from anything stored in the magnet
itself, but it makes perfect sense if that brief pulse created a magnetic dipole which acts as a gateway for the
inflow of zero-point energy from the environment.
 The magnets should get attached to the CPU fan and then the CPU fan should connect with a couple of wires.
 When a bunch of neodymium magnets gets closer to the CPU fan then rotational energy starts to increase its
energy.
 Which in turn a small amount of electricity will be produced and transfer to the Multimeter which amplifies
the signal.

www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science

[3797]
 e-ISSN: 2582-5208
International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:05/Issue:12/December-2023 Impact Factor- 7.868 www.irjmets.com
 As a result, small amount of electricity will produce and transfer to the Multimeter which amplifies the
signal.
 And the amplified voltage reached the end user which can be used as free power or free energy.
 Production of electricity is the most important factor now days because each and every application is based
on electricity only.
 Source production for free energy generation project can produce free electricity using different energy
system by using conversion process between them.
 This source can produce electricity in milivolts.
IV. RESULTS AND DISCUSSION
Finally, electricity is generated by combining two energies: rotational and magnetic energy. This is the use of
renewable energy sources and free energy. In comparison to other forms of energy, the cost will be quite low.
The cost of implementation and setup will be minimal, and the task will be pollution-free. As a result, no
attracting or repulsive force exists across the CPU fan. Finally, due to the lack of rotational energy, no electricity
will be produced.
Because of the existence of magnets on the CPU fan, there will be an attracted or repulsive force across the CPU
fan, resulting in the creation of electricity owing to rotational energy. This setup and implementation will be
very low-impact and pollution-free. Furthermore, electricity demand is expected to skyrocket in the future.
Tabulation
Serial No. Speed in Rpm Volts
01 500 1.002v
02 750 1.312v
V. CONCLUSION
Although the test findings were optimistic, the output is significant. Construction is extremely straightforward
and well within the reach of the typical handyman. It should be understood that an electromagnet shielded
magnet motor achieves continuous rotation. This break-free rotation results in the generation of continuous
electric power. This design has the potential to be a game-changer in the realm of free energy research. It is
now possible to generate free electricity using items from our own homes. Magnets and simple motors can be
used to demonstrate the concept of free energy. We've known how to generate electricity with magnets since
we first started generating electricity with traditional sources of energy.
VI. REFERENCES
[1] Patrick J. Kelly “A Practical Guide to Free-Energy Devices”.
[2] Adam “What is a Strong Magnet?” The Magnetic Matters Blog. Adams Magnetic Products. October 5,
2012.
[3] http://www.freemagneticenergy.info/
[4] http://free-energi.com
[5] Carl Nelson & Jim Williams “Boost Converter Operation” LT1070 Design Manual.
[6] Johnson, Howard R: US Patent # 4,151,431 (April 24, 1979), "Permanent Magnet Motor".
[7] J. Goldemberg The case for renewable energies. In International Conference on Control, Automation
and Systems, Oct. 2008, pp. 1220–1223.
[8] Marketou Pilarinou Maria, Lessons of General Physics, Issue I, Thermodynamics, Thessaloniki (1967).
[9] Ikomomou N., 4. Ioannou A., NtanosI.,Pittas A., Raptis S, Physics, Form B of the Senior High School,
Athens, (2000).
[10] Aleksopoulou K. D. &Marinou D. I. Physics, Issue I, Athens (1980).

www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science

[3798]