Scribd Logo
Upload

Welcome to Scribd!

  • 42 views

    MC012-010 and 012 - Data Sheet

    Uploaded by

    Romain CAFFO
    The document provides information about PLUS+1® Controllers MC012-010 and MC012-012. It summarizes that the controllers are general-purpose elements of the PLUS+1® family of mobile machine management products. They employ a DSP processor and are programmable using PLUS+1® GUIDE software. The MC012-012 has an application key that enables use of Danfoss machine control solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MC012-010 and 012 - Data Sheet

    Uploaded by

    Romain CAFFO
    42 views4 pages
    The document provides information about PLUS+1® Controllers MC012-010 and MC012-012. It summarizes that the controllers are general-purpose elements of the PLUS+1® family of mobile machine management products. They employ a DSP processor and are programmable using PLUS+1® GUIDE software. The MC012-012 has an application key that enables use of Danfoss machine control solutions.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about PLUS+1® Controllers MC012-010 and MC012-012. It summarizes that the controllers are general-purpose elements of the PLUS+1® family of mobile machine management products. They employ a DSP processor and are programmable using PLUS+1® GUIDE software. The MC012-012 has an application key that enables use of Danfoss machine control solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    42 views4 pages

    MC012-010 and 012 - Data Sheet

    Uploaded by

    Romain CAFFO
    The document provides information about PLUS+1® Controllers MC012-010 and MC012-012. It summarizes that the controllers are general-purpose elements of the PLUS+1® family of mobile machine management products. They employ a DSP processor and are programmable using PLUS+1® GUIDE software. The MC012-012 has an application key that enables use of Danfoss machine control solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Data Sheet

    PLUS+1® Controllers
    MC012-010 and 012

    Mobile machine management


    MC012-010 and 012 controllers are elements of the
    flexible, powerful, expandable, and affordable PLUS
    ®
    +1 family of mobile machine management products.
    These devices are general-purpose controllers that
    are equally suited for use as members of a distributed
    machine control system, with intelligence in every
    node, or as stand-alone controllers.

    Product highlights
    Both controllers employ a Digital Signal Processor
    (DSP), providing the controllers with extremely fast
    single cycle processing speed, and 128K internal flash.
    The MC012-012 controller has an application key that
    enables the use of Danfoss developed GUIDE machine
    control solutions. The same GUIDE HWD file is used
    with all four controllers.

    Application development
    Users develop MC012-010 and 012 applications with
    ® ® ®
    PLUS+1 GUIDE. This Microsoft Windows based
    development environment features a user-friendly,
    field proven, icon-based graphical programming tool,
    application downloader, and service/diagnostic tool.

    Features

    • User-programmable with PLUS+1® • Power supply for external sensors rated


    Comprehensive technical literature online
    GUIDE (Graphical User Integrated at 5 Vdc to 100 mA and regulated
    at powersolutions.danfoss.com
    Development Environment internally
    • 32 bit fixed-point DSP running at 150 • 2 LEDs under user control
    MHz • 3 mounting alternatives: stack, end , or
    ‒ 12 bit analog-to-digital converter side
    ‒ 16 bit timers/counters • The MC012-012 controller contains the
    • 12 pin DEUTSCH DTM connector application key required to run Danfoss
    • 9 to 36 Vdc power supply, monitored developed machine control application
    internally software
    • 1 CAN 2.0B port, the fixed range analog • CE compliant
    input can be configured as the shield
    pin

    © Danfoss | Sept 2016 AI00000018en-US1203 | 1


    Data Sheet
    MC012-010 and 012 Controller

    4 Inputs ‒ Digital: (3 A), configurable as source


    • (3) universal (DIN/AIN/FreqIN) that are or sink
    user-defined as either: ‒ PWM: (30 to 4000 Hz), configurable
    as open or closed loop with current
    ‒ Analog: with configurable ranges 0 to
    control
    5.25 Vdc (with over range protection)
    or 0 to 36 Vdc ‒ Analog voltage: open loop PWM at
    4000 Hz
    ‒ Digital: pull up (5 Vdc), pull down (0
    • Any PWMOUT/DOUT/PVGOUT can be
    Vdc) or pull to center (2.5 Vdc)
    used to provide reference power to one
    ‒ Frequency (timing): 1 Hz to 10 kHz
    PVG valve
    • (1) fixed range analog (AIN/CAN shield)
    0 to 5.25 Vdc or CAN shield pin

    2 Outputs
    • (2) universal (PWMOUT/DOUT/PVGOUT)
    that are user-defined as either:
    Specifications
    Product parameters

    Supply voltage 9 to 36 Vdc


    Operating temperature (ambient) -40°C to 70°C [-40°F to 158°F]
    Storage temperature -40°C to 85°C [-40°F to 185°F]
    Programming temperature 0°C to 70°C [32°F to 158°F]
    IP rating (with mating connector attached) IP 67
    EMI/RFI rating 100 V/M
    Weight 0.40 kg [0.88 lb]
    Vibration IEC 60068-2-64
    Shock IEC 60068-2-27 test Ea
    Maximum current, sourcing 8A
    Maximum current, sinking 8A

    2 | © Danfoss | Sept 2016 AI00000018en-US1203


    Data Sheet
    MC012-010 and 012 Controller

    Dimensions and pin assignments 12 Pin Connector

    114.4 [4.50]

    1 2 3 4 5 6
    35.3 [1.39]
    12 11 10 9 8 7
    2200B
    158.2 [6.23]

    144.5 [5.69]
    Pin Controller function
    C1-P1 Power ground -
    2 X 25.3 [1.0] C1-P2 Power ground +
    62.0 [2.44]
    C1-P3 CAN +
    107.0 [4.21] C1-P4 CAN -
    C1-P5 AIN/CAN shield
    C1-P6 5 Vdc sensor power +
    C1-P7 Sensor power ground -
    C1-P8 DIN/AIN/FreqIN
    C1-P9 DIN/AIN/FreqIN
    C1-P10 DIN/AIN/FreqIN
    C1-P11 PWMOUT/DOUT/PVGOUT
    51.6 [2.03] C1-P12 PWMOUT/DOUT/PVGOUT
    47.1 [1.85]

    Use care when wiring mating connector. Pinouts listed are for
    2199A
    device pins.
    C Caution

    This device is not field serviceable. Opening the device housing


    will void the warranty.

    © Danfoss | Sept 2016 AI00000018en-US1203 | 3


    Ordering information
    Product part number
    MC012-010 part number 10103773
    MC012-012 part number 11013721

    Related products part numbers


    CG150 CAN/USB Gateway 10104136
    DEUTSCH mating 10102025 (16 to 20 10100944 (20 to 24
    connector bag assembly AWG) AWG)
    ®
    PLUS+1 GUIDE single user 10101000
    license

    Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
    already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
    All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

    4 | © Danfoss | Sept 2016 AI00000018en-US1203

    You might also like