Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    TDS Turbonycoil TN160 1E9

    Uploaded by

    Himalaya
    Turbonycoil 160 is a synthetic aviation turbine oil made of neopolyol esters and additives. It is designed to withstand high temperatures in military fighter engines like the F-15 and F-16. It can also be used in civil helicopter gearboxes and aircraft auxiliary power units. The oil meets various military and industry specifications, including MIL-PRF-7808 Grade 3. It has properties like low acidity, foam resistance, and compatibility with common aircraft elastomers and metals under high stress conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS Turbonycoil TN160 1E9

    Uploaded by

    Himalaya
    25 views2 pages
    Turbonycoil 160 is a synthetic aviation turbine oil made of neopolyol esters and additives. It is designed to withstand high temperatures in military fighter engines like the F-15 and F-16. It can also be used in civil helicopter gearboxes and aircraft auxiliary power units. The oil meets various military and industry specifications, including MIL-PRF-7808 Grade 3. It has properties like low acidity, foam resistance, and compatibility with common aircraft elastomers and metals under high stress conditions.

    Original Description:

    TDS

    Original Title

    TDS_Turbonycoil_TN160_1E9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Turbonycoil 160 is a synthetic aviation turbine oil made of neopolyol esters and additives. It is designed to withstand high temperatures in military fighter engines like the F-15 and F-16. It can also be used in civil helicopter gearboxes and aircraft auxiliary power units. The oil meets various military and industry specifications, including MIL-PRF-7808 Grade 3. It has properties like low acidity, foam resistance, and compatibility with common aircraft elastomers and metals under high stress conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views2 pages

    TDS Turbonycoil TN160 1E9

    Uploaded by

    Himalaya
    Turbonycoil 160 is a synthetic aviation turbine oil made of neopolyol esters and additives. It is designed to withstand high temperatures in military fighter engines like the F-15 and F-16. It can also be used in civil helicopter gearboxes and aircraft auxiliary power units. The oil meets various military and industry specifications, including MIL-PRF-7808 Grade 3. It has properties like low acidity, foam resistance, and compatibility with common aircraft elastomers and metals under high stress conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TURBONYCOIL 160

    TECHNICAL DATA SHEET

    SYNTHETIC AVIATION TURBINE OIL NATO CODE O-148

    DESCRIPTION

    Turbonycoil 160 is a 3 cSt oil at 100°C and is made of neopolyol esters containing
    additives to improve its anti-oxidant, anti-corrosion and extreme-pressure properties.
    It is designed to withstand the high temperature experienced by the military engines.

    APPLICATIONS

    • Turbine oil of fighter engines


    (McDonnel Douglas F-15, Lockheed Martin F-16, etc.)
    • Turbine oil of civil engines below -40°C ambient temperature
    • Turbine and tail rotor gearbox of helicopter in cold weather
    • APU of civil aircraft for easy in-flight restart
    • Trimmable Horizontal Stabilizer (THS) of civil aircraft

    SPECIFICATIONS * / OEM’s & Airframers reference

    • Approved MIL-PRF-7808 L GRADE 3


    • Meets OX-9
    • Listed in Airbus CML 03ABB1
    • Listed in ATR CML 03-003
    • Listed in BOEING CML D00071 & CML D00109

    * Approved: The product has been approved by the relevant authority. The product is referenced on the applicable qualified product list.
    Meets: The product complies with all the requirements of the specification and has not been formally approved or approval is in progress or
    the specification is obsolete.

    TYPICAL
    CHARACTERISTIC UNIT MIL-PRF-7808 LIMIT TEST METHOD
    RESULT
    Appearance - conform limpid visual examination

    Density at 20°C kg/dm3 0.957 report ASTM D4052


    Kinematic Viscosity
    at 100°C 3.20 min. 3.00
    at 40°C mm²/s 12.8 min. 11.5 ASTM D445
    at -51°C after 35 min. 9600 max. 17000 ASTM D2532
    at -51°C after 3 h 9620 max. 17000
    Acid Number mg KOH/g 0.19 max. 0.30 ASTM D664

    Flash Point °C 228 min. 210 ASTM D92

    Evaporation Loss, 6 h 30 at 205°C %w 20.2 max. 30 ASTM D972


    Static Foam Test at 80°C
    FTM-S-791-3213
    Foam Volume / Collapse Time cm3 / s 20 / 0 max. 100 / max. 60
    Lead Corrosion, 1 h at 163°C g/m² - 0.8 max. +/- 9.3 FTM-S-791-5321
    TYPICAL
    CHARACTERISTIC UNIT MIL-PRF-7808 LIMIT TEST METHOD
    RESULT
    Oxidation & Corrosiveness Stability, 96 h at
    200°C
    Acid Number Increase mg KOH/g 2.0 max. 4.0
    Viscosity Change % + 14 - 5 to + 25
    Insoluble Matter mg/100ml None max. 4.0
    Metal Weight Change mg/cm²
    Aluminium 0.0 max. +/- 0.2 ASTM D4636
    Silver 0.0 max. +/- 0.2
    Steel M/50 0.0 max. +/- 0.2
    Iron 0.0 max. +/- 0.2
    Titanium 0.0 max. +/- 0.2
    Brass 0.0 max. +/- 0.4
    Magnesium 0.0 max.+/- 0.4
    Solid Particle Contamination mg/dm3 0.3 max. 5.0 FTM-S-791-3013
    ASTM D5185
    Trace Metal Content
    (Induction Coupled
    Ag, Al, Cr, Cu, Fe, Mg, Mo, Ni, Pb, Si, Sn, Ti, mg/kg
    0.0 max. 2.0 Plasma
    Zn,
    Spectroscopy)
    Compatibility with standard elastomer SAE-
    AMS 3217/1 (NBR), 168 h at 70°C % volume 28.0 12 to 35 FTM-S-791-3604
    Swelling

    Compatibility with standard elastomer SAE-


    AMS 3217/4 (FKM), 72 h at 175°C
    Swelling
    % volume 18.7 2 to 25 FTM-S-791-3432
    Tensile Strength Change
    % - 30 max. 50
    Elongation Change
    % + 12 max. 50
    Hardness Change
    % - 15 max. 20
    Compatibility with standard elastomer SAE-
    AMS 3217/5 (FS), 72 h at 150°C
    Swelling
    % volume 8.8 2 to 25 FTM-S-791-3432
    Tensile Strength Change
    % - 18 max. 50
    Elongation Change
    % - 14 max. 50
    Hardness Change
    % - 16 max. 20
    Corrosion Test, 50 h at 232°C
    Brass, weight change 0.0 max. 4.5 FTM-S-791-5305
    g/m²
    Silver, weight change 0.0 max. 4.5

    The values above are typical values. They do not constitute any contractual commitment.
    Sales specifications are available on request. The present technical data sheet replaces all the previous editions.

    NYCO, 66 avenue des Champs-Élysées BP 414 - 75366 Paris CEDEX 08 - France


    Tel : +33 1 45 61 50 00 - Fax : +33 1 45 61 50 13 - [email protected] - www.nyco-group.com TDS_TN160_1E9

    You might also like