# Other default tuning values

# MySQL Server Instance Configuration File

# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows, when MySQL has been installed using MySQL Installer you
# should keep this file in the ProgramData directory of your server
# (e.g. C:\ProgramData\MySQL\MySQL Server X.Y). To make sure the server
# reads the config file, use the startup option "--defaults-file".
#
# To run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server
X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guidelines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
# For advice on how to change settings please see
# https://dev.mysql.com/doc/refman/5.7/en/server-configuration-defaults.html
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

# pipe=
# socket=MYSQL

port=3306

[mysql]
no-beep

# default-character-set=

# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
# server_type=3
[mysqld]

# The next three options are mutually exclusive to SERVER_PORT below.

# skip-networking
# enable-named-pipe
# shared-memory

# shared-memory-base-name=MYSQL

# The Pipe the MySQL Server will use

# socket=MYSQL

# The access control granted to clients on the named pipe created by the MySQL
Server.
# named-pipe-full-access-group=

# The TCP/IP Port the MySQL Server will listen on

port=3306

# Path to installation directory. All paths are usually resolved relative to this.
# basedir="C:/Program Files/MySQL/MySQL Server 5.7/"

# Path to the database root

datadir=C:/ProgramData/MySQL/MySQL Server 5.7/Data

# The default character set that will be used when a new schema or table is
# created and no character set is defined
# character-set-server=

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# The current server SQL mode, which can be set dynamically.

# Modes affect the SQL syntax MySQL supports and the data validation checks it
performs. This
# makes it easier to use MySQL in different environments and to use MySQL together
with other
# database servers.
sql-
mode="ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR
_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
# General and Slow logging.
log-output=FILE

general-log=0

general_log_file="BR169.log"

slow-query-log=1

slow_query_log_file="BR169-slow.log"

long_query_time=10

# Error Logging.
log-error="BR169.err"

# ***** Group Replication Related *****

# Specifies the base name to use for binary log files. With binary logging
# enabled, the server logs all statements that change data to the binary
# log, which is used for backup and replication.
# log-bin

# ***** Group Replication Related *****

# Specifies the server ID. For servers that are used in a replication topology,
# you must specify a unique server ID for each replication server, in the
# range from 1 to 2^32 − 1. “Unique” means that each ID must be different
# from every other ID in use by any other replication source or replica.
server-id=1

# ***** Group Replication Related *****

# Indicates how table and database names are stored on disk and used in MySQL.
# Value 0 = Table and database names are stored on disk using the lettercase
specified in the CREATE
# TABLE or CREATE DATABASE statement. Name comparisons are case-
sensitive. You should not
# set this variable to 0 if you are running MySQL on a system that has
case-insensitive file
# names (such as Windows or macOS). If you force this variable to 0 with
# --lower-case-table-names=0 on a case-insensitive file system and access
MyISAM tablenames
# using different lettercases, index corruption may result.
# Value 1 = Table names are stored in lowercase on disk and name comparisons are
not case-sensitive.
# MySQL converts all table names to lowercase on storage and lookup. This
behavior also applies
# to database names and table aliases.
# Value 2 = Table and database names are stored on disk using the lettercase
specified in the CREATE TABLE
# or CREATE DATABASE statement, but MySQL converts them to lowercase on
lookup. Name comparisons
# are not case-sensitive. This works only on file systems that are not
case-sensitive! InnoDB
# table names and view names are stored in lowercase, as for
lower_case_table_names=1.
lower_case_table_names=1

# This variable is used to limit the effect of data import and export operations,
such as
# those performed by the LOAD DATA and SELECT ... INTO OUTFILE statements and the
# LOAD_FILE() function. These operations are permitted only to users who have the
FILE privilege.
secure-file-priv="C:/ProgramData/MySQL/MySQL Server 5.7/Uploads"

# The maximum amount of concurrent sessions the MySQL server will

# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=151

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_open_cache=2000

# Defines the maximum size of internal in-memory temporary tables created

# by the MEMORY storage engine and, as of MySQL 8.0.28, the TempTable storage
# engine. If an internal in-memory temporary table exceeds this size, it is
# automatically converted to an on-disk internal temporary table.
tmp_table_size=26M

#*** MyISAM Specific options

# The maximum size of the temporary file that MySQL is permitted to use while re-
creating a
# MyISAM index (during REPAIR TABLE, ALTER TABLE, or LOAD DATA). If the file size
would be
# larger than this value, the index is created using the key cache instead, which
is slower.
# The value is given in bytes.
myisam_max_sort_file_size=2146435072

# The size of the buffer that is allocated when sorting MyISAM indexes during a
REPAIR TABLE
# or when creating indexes with CREATE INDEX or ALTER TABLE.
myisam_sort_buffer_size=44M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=8M

# Each thread that does a sequential scan for a MyISAM table allocates a buffer
# of this size (in bytes) for each table it scans. If you do many sequential
# scans, you might want to increase this value, which defaults to 131072. The
# value of this variable should be a multiple of 4KB. If it is set to a value
# that is not a multiple of 4KB, its value is rounded down to the nearest multiple
# of 4KB.
read_buffer_size=88K

# This variable is used for reads from MyISAM tables, and, for any storage engine,
# for Multi-Range Read optimization.
read_rnd_buffer_size=256K

#*** INNODB Specific options ***

# innodb_data_home_dir=
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
# skip-innodb

# If set to 1, InnoDB will flush (fsync) the transaction logs to the

# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size in bytes of the buffer that InnoDB uses to write to the log files on
# disk. The default value changed from 8MB to 16MB with the introduction of 32KB
# and 64KB innodb_page_size values. A large log buffer enables large transactions
# to run without the need to write the log to disk before the transactions commit.
# Thus, if you have transactions that update, insert, or delete many rows, making
# the log buffer larger saves disk I/O.
innodb_log_buffer_size=16M

# The size in bytes of the buffer pool, the memory area where InnoDB caches table
# and index data. The default value is 134217728 bytes (128MB). The maximum value
# depends on the CPU architecture; the maximum is 4294967295 (232-1) on 32-bit
systems
# and 18446744073709551615 (264-1) on 64-bit systems. On 32-bit systems, the CPU
# architecture and operating system may impose a lower practical maximum size than
the
# stated maximum. When the size of the buffer pool is greater than 1GB, setting
# innodb_buffer_pool_instances to a value greater than 1 can improve the
scalability on
# a busy server.
innodb_buffer_pool_size=128M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=48M

# Defines the maximum number of threads permitted inside of InnoDB. A value

# of 0 (the default) is interpreted as infinite concurrency (no limit). This
# variable is intended for performance tuning on high concurrency systems.
# InnoDB tries to keep the number of threads inside InnoDB less than or equal to
# the innodb_thread_concurrency limit. Once the limit is reached, additional
threads
# are placed into a “First In, First Out” (FIFO) queue for waiting threads. Threads

# waiting for locks are not counted in the number of concurrently executing
threads.
innodb_thread_concurrency=25

# The increment size (in MB) for extending the size of an auto-extend InnoDB system
tablespace file when it becomes full.
innodb_autoextend_increment=64
# The number of regions that the InnoDB buffer pool is divided into.
# For systems with buffer pools in the multi-gigabyte range, dividing the buffer
pool into separate instances can improve concurrency,
# by reducing contention as different threads read and write to cached pages.
innodb_buffer_pool_instances=8

# Determines the number of threads that can enter InnoDB concurrently.

innodb_concurrency_tickets=5000

# Specifies how long in milliseconds (ms) a block inserted into the old sublist
must stay there after its first access before
# it can be moved to the new sublist.
innodb_old_blocks_time=1000

# When this variable is enabled, InnoDB updates statistics during metadata

statements.
innodb_stats_on_metadata=0

# When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB

stores the data and indexes for each newly created table
# in a separate .ibd file, rather than in the system tablespace.
innodb_file_per_table=1

# Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb,
3 for strict_innodb, 4 for none, 5 for strict_none.
innodb_checksum_algorithm=0

# If this is set to a nonzero value, all tables are closed every flush_time seconds
to free up resources and
# synchronize unflushed data to disk.
# This option is best used only on systems with minimal resources.
flush_time=0

# The minimum size of the buffer that is used for plain index scans, range index
scans, and joins that do not use
# indexes and thus perform full table scans.
join_buffer_size=256K

# The maximum size of one packet or any generated or intermediate string, or any
parameter sent by the
# mysql_stmt_send_long_data() C API function.
max_allowed_packet=4M

# If more than this many successive connection requests from a host are interrupted
without a successful connection,
# the server blocks that host from performing further connections.
max_connect_errors=100

# Changes the number of file descriptors available to mysqld.

# You should try increasing the value of this option if mysqld gives you the error
"Too many open files".
open_files_limit=4161

# If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you
can consider increasing the
# sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be
improved with query optimization
# or improved indexing.
sort_buffer_size=256K

# Specify the maximum size of a row-based binary log event, in bytes.

# Rows are grouped into events smaller than this size if possible. The value should
be a multiple of 256.
binlog_row_event_max_size=8K

# If the value of this variable is greater than 0, a replica synchronizes its

master.info file to disk.
# (using fdatasync()) after every sync_master_info events.
sync_master_info=10000

# If the value of this variable is greater than 0, the MySQL server synchronizes
its relay log to disk.
# (using fdatasync()) after every sync_relay_log writes to the relay log.
sync_relay_log=10000

# If the value of this variable is greater than 0, a replica synchronizes its

relay-log.info file to disk.
# (using fdatasync()) after every sync_relay_log_info transactions.
sync_relay_log_info=10000

# Load mysql plugins at start."plugin_x ; plugin_y".

# plugin_load

# The TCP/IP Port the MySQL Server X Protocol will listen on.
# loose_mysqlx_port=33060