Scribd
Upload
1K views1 page

Team Feasibility Commitment

The team feasibility commitment document considers whether a new product is feasible to manufacture based on 10 criteria such as whether specifications are defined, engineering requirements can be met, manufacturing tolerances can be achieved, and statistical process control is possible. The team answers yes, no, or not applicable for each criteria. They then conclude whether the product is feasible as-is, feasible with changes, or requires a design revision to meet requirements.

Uploaded by

murali4095
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views1 page

Team Feasibility Commitment

The team feasibility commitment document considers whether a new product is feasible to manufacture based on 10 criteria such as whether specifications are defined, engineering requirements can be met, manufacturing tolerances can be achieved, and statistical process control is possible. The team answers yes, no, or not applicable for each criteria. They then conclude whether the product is feasible as-is, feasible with changes, or requires a design revision to meet requirements.

Uploaded by

murali4095
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TEAM FEASIBILITY COMMITMENT

Customer: Date:

Part Number: Part Name:

Model
Feasibility Considerations
Our product quality planning team has considered the following questions, not intended to be all-inclusive in
performing a feasibility evaluation. The drawings and/or specifications provided have been used as a basis for
analyzing the ability to meet all specified requirements. All "no" answers are supported with attached comments
identifying our concerns and/or proposed changes to enable us to meet the specified requirements.

S.NO CONSIDERATION YES NO NA


Is product adequately defined (application requirements, etc. to enable
1
feasibility evaluation?
2 Can Engineering Performance Specifications be met as written?
3 Can product be manufactured to tolerances specified on drawing?
4 Can product be manufactured with Cpk's that meet requirements?
5 Is there adequate capacity to produce product?
6 Does the design allow the use of efficient material handling techniques?
7 Can the product be manufactured without incurring any unusual:
- Costs for capital equipment?
- Costs for tooling?
- Alternative manufacturing methods?
8 Is statistical process control required on the product?
9 Is statistical process control presently used on similar products?
10 Where statistical process control is used on similar products:
- Are the processes in control and stable?
- Are Cpk's greater than 1.33?

Conclusion

√ Feasible Product can be produced as specified with no revisions.


Feasible Changes recommended (see attached).
Not Feasible Design revision required to produce product within the specified requirements.

Sign-Off

Team Member/Title Team Member/Title

Team Member/Title Team Member/Title

Team Member/Title Team Member/Title

Team Member/Title Team Member/Title

You might also like