G-SERIES

EXCAVATORS
75G / 85G

BRIDGE
THE GAP
 +
RELIABLE PERFORMANCE

MIDSIZE
MIGHT.
 FIT IN MORE PRODUCTIVITY.
Neither too big nor too small, these right-size excavators are the perfect solution for a wide variety
of tasks. Their reduced-tail-swing configurations provide extra flexibility, enabling them to maneuver
nimbly and work efficiently in and around congested conditions. What’s more, the 85G comes equipped
with an independent-swing boom that enables work close to curbs, parallel to structures, or alongside
traffic. Their spacious, comfortable cabs feature easy-to-navigate enhanced LCD monitors that let
operators easily dial-in a wealth of machine info and functionality. See how the 75G and 85G can be
a perfect fit for your equipment fleet for years to come.

4
ALL IN THE FAMILY
SIZE THEM UP.
When we designed the 75G and 85G, we combined the agility and adaptability of our
smaller compact models with the power and wide-ranging capabilities of their large
excavator siblings — all with the flexibility of your fleet in mind.

Have it your way Blade runner Auxiliary forces

Undercarriage options include The standard blade enables the Factory-installed standard auxiliary
rubber tracks or sealed and 75G and 85G to capably backfill hydraulics with proportional
lubricated chain with rubber pads and clean up. It also increases control boost jobsite productivity.
or steel semi-grousers from 18- to agility and stability on slopes. High-pressure, high-flow auxiliary
24-inches wide. Numerous arm and hydraulic packages power the
bucket options let you spec the right At home in the cab addition of a hydraulic hammer
excavator for the way you work. Spacious operator stations with or a wide range of over 100
large entryways and expansive John Deere attachments.
Mass transit sight lines help redefine comfort
These go-to taskmasters transport and convenience.
easily between jobsites, making
them ideal for “dig-and-go” jobs.

YOUR CHOICE
OF UNDERCARRIAGE, ARM,
AND BUCKET OPTIONS
STANDOUT FEATURE

SMOOTH OPERATORS

FORM AND
FUNCTION.
YOU HAVE WORK TO DO
REMOVE OBSTACLES WITHOUT MOVING THEM.
Equipped with the same proven load-sensing open-center hydraulic system as our other
excavators, the pinpoint metering of the 75G and 85G delivers smooth-as-silk control.
Together with their reduced-tail-swing configurations, they provide the finesse and footwork
to keep jobsite obstacles from becoming barriers. Two power modes, plus an available
control-pattern selector, easily adapt to changing job demands and operator preferences.

6
Tighten up Precision matters Modes of operation
Why let obstacles dictate the way For work that requires extra finesse, Engine performance and hydraulic flow
you work? The 85G’s independent- short-throw low-effort controls, are optimally balanced for predictable
swing boom lets you get in tight exceptional metering, and smooth operation. Two productivity modes
and even dig parallel to structures. multifunction operation give the allow you to choose the digging style
precision you need. that fits the job. Power delivers a
When the rubber meets the road balance of speed and fuel economy for
Optional rubber track pads or Shift into gear normal operation. Economy reduces
heavy-duty rubber belts let these Two-speed propel with AutoShift top speed and helps save fuel.
excavators set up and work on helps speed machine moves and
paved surfaces and even cross maximize maneuverability.
curbs without doing damage.
 QUIET COMFORT
PUT MORE PRODUCTIVITY ON SPEED DIAL.
In the 75G and 85G, it’s easy for operators to “dial things up.” The refined monitor employs a
rotary control to quickly tap into an abundance of performance and convenience functions and
features. Operators will also appreciate the comfortable fabric-covered adjustable suspension
seat and ample legroom in the spacious, well-appointed cab. Expansive all-around visibility,
low-effort joysticks, a highly efficient HVAC system, and numerous other amenities offer
what your operators need to focus on their work.

8
 See clearly now In the know
Wide expanse of front and side glass, Multi-language LCD monitor and
narrow front cab posts, large tinted rotary dial provide intuitive access
overhead hatch, and numerous to a wealth of information and
mirrors enable all-around visibility. functions. Just turn and tap to
select work mode, access operating
Take control info, check maintenance intervals,
Standard lockable control-pattern source diagnostic codes, adjust cab
selector valve allows operators to temperature, and tune the radio.
switch from backhoe- to SAE-style
controls with just a twist of the wrist. Keep it down
Spacious cab is noticeably quiet.
At your fingertips Silicone-filled mounts effectively
Ergonomically correct short-throw isolate noise and vibration.
joysticks provide smooth, predictable
fingertip control with less movement Light things up
or effort. Standard boom/frame lights
illuminate the way, to extend
Whatever the weather your day beyond daylight hours.
Automatic, high-velocity bi-level
climate-control system with Have a seat
automotive-style adjustable We’ve got your back with sculpted
louvers helps keep the glass clear mechanical-suspension multi-position
and the cab comfortable. mid- and high-back seats.

AUTO
BI-LEVEL
CLIMATE-CONTROL
SYSTEM
 PROVEN PERFORMERS
TAKE IT ON.
Just like you, our 75G and 85G Excavators don’t quit. These
dependable workers deliver rugged reliability, with job-proven
digging structures and hydraulic, electrical, and undercarriage
components. Highly efficient cooling systems keep things running
cool, even in high altitudes or harsh environments. Other durability-
enhancing “extras” include tungsten-carbide-coated wear surfaces
and oil-impregnated bushings. When you know how they’re built,
you’ll see how tough they are.

Stress management Fan appeal

A John Deere feature, three welded Viscous fan continuously adjusts
bulkheads within the boom resist speed as necessary for effective
torsional stress. cooling. Helps reduce noise and
fuel consumption, too.
Rugged reinforcement
Rigid, reinforced D-channel side Wrap it up
frames resist impacts, maximizing Wear-resistant hoses are routed,
cab and component protection. secured, and guarded for exceptional
durability. Cordura® covering and
Coat of arms wire wrapping adds an extra degree
Tungsten-carbide coating creates of protection to exposed hoses.
an extremely wear-resistant surface O-ring face-seal couplers virtually
to protect the all-important bucket- eliminate leaks.
to-arm joint.
Underneath it all
Tough enough Large idlers, rollers, and strutted
Box-section track frames, thick-plate links in the sealed and lubricated
single-sheet mainframe, and large undercarriage deliver reliable
swing bearing deliver rock-solid performance. Optional heavy-
durability. Strong shields deflect duty rubber track pads provide
material and impacts, protecting the the long-term durability of a steel
blade cylinder and propel motors. undercarriage, yet are easy on hard
surfaces such as asphalt or concrete.

DURABLE
D-CHANNEL
SIDE FRAMES

10
 BUILT FOR WHAT YOU DO

AND THEN SOME.

 CUT MAINTENANCE TIME
AND OPERATING COSTS, TOO.
Go for a spin Extended intervals
Vertical spin-on fuel filter and water Large fuel tank and 500- and
separator are conveniently located in 5,000-hour engine and hydraulic
the right rear compartment for quick, oil-service intervals decrease
convenient ground-level service access. downtime for routine maintenance.
Oil-impregnated bushings enhance
It’s all right there durability and extend grease intervals
Large hinged doors enable easy to 500 hours for the arm-and-boom
access to service items. Left rear joint and 100 hours for the bucket joint.
compartment houses the battery,
engine air filter, fresh-air cab filter,
and side-by-side coolers.

Service simplified
Sight gauges and see-through
reservoirs allow hydraulic, coolant,
and window-washer fluid-level
checks at a glance. Lube banks,
filters, and service points are
grouped for added convenience.

12
Reliable engine technology
The EPA Final Tier 4 (FT4)/EU Stage IV technology in
these excavators is simple, fuel efficient, fully integrated,
and fully supported. It employs field-proven cooled
exhaust gas recirculation (EGR) for reducing NOX, and a
diesel particulate filter (DPF) and diesel oxidation catalyst
(DOC) to reduce particulate matter (PM). DPF cleaning
happens automatically without impacting machine
productivity. Minimum service interval is 3,000 hours
and can be done by your John Deere dealer.
 SPECIFICATIONS

Engine 75G
Manufacturer and Model Yanmar 4TNV98C
Non-Road Emission Standard EPA Final Tier 4/EU Stage IV
Net Power (ISO 9249) 42.4 kW (56.9 hp) at 2,000 rpm
Cylinders 4
Displacement 3.3 L (202 cu. in.)
Aspiration Natural
Off-Level Capacity 70% (35 deg.)
Cooling
Variable-speed fan; viscous clutch
Powertrain
2-speed propel with automatic shift
Maximum Travel Speed
Low 3.1 km/h (1.9 mph)
High 5.0 km/h (3.1 mph)
Drawbar Pull 6650 kgf (14,661 lb.)
Hydraulics
Open center, load sensing
Main Pumps 3 variable-displacement axial-piston pumps
Maximum Pump Flow 2 x 72 + 56 L/m (2 x 19 + 15 gpm)
Pilot Pump 1 gear
Maximum Rated Flow 20 L/m (5.3 gpm)
System Relief Pressure 3900 kPa (566 psi)
System Operating Pressure
Implement Circuits 26 000 kPa (3,771 psi)
Travel Circuits 31 400 kPa (4,554 psi)
Swing Circuits 25 200 kPa (3,655 psi)
Controls Pilot levers, short stroke, low effort; hydraulic pilot controls with shutoff lever
Cylinders
Heat-treated, chrome-plated, polished cylinder rods; hardened steel (replaceable bushings) pivot pins
Bore Rod Diameter Stroke
Boom (1) 115 mm (4.5 in.) 65 mm (2.6 in.) 885 mm (34.8 in.)
Arm (1) 95 mm (3.7 in.) 60 mm (2.4 in.) 900 mm (35.4 in.)
Bucket (1) 85 mm (3.3 in.) 55 mm (2.2 in.) 730 mm (28.7 in.)
Electrical
Batteries 2 x 12 volt
Battery Capacity 2 x 450 CCA
Alternator Rating 50 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame
Undercarriage
Rollers (each side)
Carrier 1
Track 5
Shoes (each side) 40
Track
Adjustment Hydraulic
Chain Sealed and lubricated
Swing Mechanism
Swing Speed 10.5 rpm
Swing Torque 16 600 Nm (12,244 lb.-ft.)

14
 SPECIFICATIONS

Ground Pressure 75G

450-mm (18 in.) Rubber Crawler Pads 39 kPa (5.6 psi)
450-mm (18 in.) Continuous Rubber Belt 39 kPa (5.6 psi)
450-mm (18 in.) Triple Semi-Grouser Shoes 38 kPa (5.4 psi)
600-mm (24 in.) Triple Semi-Grouser Shoes 27 kPa (3.9 psi)
Serviceability
Refill Capacities
Fuel Tank 135 L (35.7 gal.)
Cooling System 9.7 L (2.6 gal.)
Engine Oil with Filter 12.3 L (3.2 gal.)
Hydraulic Tank 56 L (15 gal.)
Hydraulic System 103 L (27 gal.)
Propel Gearbox (each) 1.2 L (1.3 qt.)
Operating Weights
With 0.31-m3 (0.41 cu. yd. ), 762-mm (30 in.), 313-kg
(691 lb.) Bucket; 2.12-m (6 ft. 11 in.) Arm; 1305-kg (2,877 lb.)
Counterweight; 2470-mm (8 ft. 1 in.) Blade; Full Fuel Tank;
and 75-kg (165 lb.) Operator
450-mm (18 in.) Rubber Crawler Pads 8143 kg (17,952 lb.)
450-mm (18 in.) Triple Semi-Grouser Shoes 7882 kg (17,377 lb.)
600-mm (24 in.) Triple Semi-Grouser Shoes 8265 kg (18,221 lb.)
450-mm (18 in.) Continuous Rubber Belt 7898 kg (17,412 lb.)
Optional Components
Undercarriage (with the following)
450-mm (18 in.) Rubber Crawler Pads 2903 kg (6,400 lb.)
450-mm (18 in.) Continuous Rubber Belt 2867 kg (6,321 lb.)
450-mm (18 in.) Triple Semi-Grouser Shoes 2851 kg (6,285 lb.)
600-mm (24 in.) Triple Semi-Grouser Shoes 3025 kg (6,669 lb.)
1-Piece Boom (with arm cylinder) 497 kg (1,096 lb.)
2.12-m (6 ft. 11 in.) Arm with Bucket Cylinder and Linkage 276 kg (608 lb.)
Boom Lift Cylinders (2), Total Weight 178 kg (392 lb.)
Counterweight, Standard 1305 kg (2,877 lb.)
Operating Dimensions
Arm Length 2.12 m (6 ft. 11 in.)

CENTERLINE OF SWING
Arm Digging Force (ISO) 30.7 kN (6,902 lb.) E
Bucket Digging Force (ISO) 46.6 kN (10,476 lb.)
A Maximum Reach 6.92 m (22 ft. 8 in.)
A| Maximum Reach at Ground Level 6.76 m (22 ft. 2 in.)
B Maximum Digging Depth 4.61 m (15 ft. 1 in.)
B| Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom 4.32 m (14 ft. 2 in.)
C Maximum Cutting Height 7.61 m (25 ft. 0 in.) C
D Maximum Dumping Height 5.51 m (18 ft. 1 in.)
E Minimum Swing Radius 2.17 m (7 ft. 1 in.) D
F Maximum Vertical Wall 4.22 m (13 ft. 10 in.)
G Tail Swing Radius 1.29 m (4 ft. 3 in.)
GROUND LINE

A'
B' F
B A
 75G

Machine Dimensions 75G

Arm Length 2.12 m (6 ft. 11 in.)
A Overall Length 6.37 m (20 ft. 11 in.)
B Overall Height 2.69 m (8 ft. 10 in.)
C Undercarriage Width J D
With 450-mm (18 in.) Shoes 2.32 m (7 ft. 7 in.)
With 600-mm (24 in.) Shoes 2.47 m (8 ft. 1 in.)
D Rear-End Length/Swing Radius 1.29 m (4 ft. 3 in.)
H B G
E Distance Between Idler/Sprocket Centerline 2.29 m (7 ft. 6 in.)
F Undercarriage Length 2.92 m (9 ft. 7 in.)
G Counterweight Clearance 0.73 m (29 in.)
H Cab Height 2.69 m (8 ft. 10 in.) I
I Ground Clearance 360 mm (14 in.) O E
K F
J Upperstructure Width 2.32 m (7 ft. 7 in.) A
C
K Gauge Width 1.87 m (6 ft. 2 in.)
L Blade Lift Height 360 mm (14 in.)
Blade Height 480 mm (19 in.)
Blade Width
With 450-mm (18 in.) Shoes 2320 mm (7 ft. 7 in.)
L
With 600-mm (24 in.) Shoes 2470 mm (8 ft. 1 in.)
M Blade Cut Below Grade 300 mm (12 in.)
N
N Blade Lift Angle 27 deg.
O Track Width
With 450-mm (18 in.) Shoes 0.45 m (18 in.) M
With 600-mm (24 in.) Shoes 0.60 m (24 in.)
Lift Capacities
Boldface type indicates hydraulically limited capacities; lightface type indicates stability-limited capacities, in kg (lb.). Ratings are at bucket lift hook, using standard
counterweight, situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87% of hydraulic capacity
or 75% of weight needed to tip machine. All lift capacities are based on ISO 10567.
HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION
1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.)
LOAD POINT HEIGHT Over Front Over Side Over Front Over Side Over Front Over Side
With 3.72-m (12 ft. 8 in.) boom, 2.12-m (6 ft. 11 in.) arm, 0.28-m3 (0.37 cu. yd.) bucket, 450-mm (18 in.) rubber pads, and 2320-mm (7 ft. 9 in.) blade
4.5 m (15 ft.) 1475 1475
(3,252) (3,252)
3.0 m (10 ft.) 1834 1834 1613 1613
(4,043) (4,043) (3,557) (3,557)
1.5 m (5 ft.) 2864 2797 1958 1541
(6,313) (6,167) (4,317) (3,397)
Ground Line 3508 2629 2248 1472
(7,734) (5,797) (4,956) (3,246)
–1.5 m (–5 ft.) 3544 3544 3514 2594 2252 1451
(7,813) (7,813) (7,746) (5,718) (4,964) (3,199)
–3.0 m (–10 ft.) 5020 5020 2742 2663
(11,068) (11,068) (6,044) (5,870)

16
 75G

Lift Capacities (continued) 75G

Boldface type indicates hydraulically limited capacities; lightface type indicates stability-limited capacities, in kg (lb.). Ratings are at bucket lift hook, using standard
counterweight, situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87% of hydraulic capacity or
75% of weight needed to tip machine. All lift capacities are based on ISO 10567.
HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION
1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.)
LOAD POINT HEIGHT Over Front Over Side Over Front Over Side Over Front Over Side
With 3.72-m (12 ft. 8 in.) boom, 2.12-m (6 ft. 11 in.) arm, 0.28-m3 (0.37 cu. yd.) bucket, 600-mm (24 in.) shoes, and 2470-mm (8 ft. 1 in.) blade
4.5 m (15 ft.) 1475 1475
(3,252) (3,252)
3.0 m (10 ft.) 1834 1834 1613 1613
(4,043) (4,043) (3,557) (3,557)
1.5 m (5 ft.) 2864 2841 1958 1566
(6,313) (6,263) (4,317) (3,452)
Ground Line 3508 2673 2248 1497
(7,734) (5,893) (4,956) (3,301)
–1.5 m (–5 ft.) 3544 3544 3514 2637 2252 1476
(7,813) (7,813) (7,746) (5,814) (4,964) (3,254)
–3.0 m (–10 ft.) 5020 5020 2742 2707
(11,068) (11,068) (6,044) (5,967)
Buckets
A full line of buckets is offered to meet a wide variety of applications. Replaceable cutting edges are available through John Deere Parts. Optional side cutters add
150 mm (6 in.) to bucket widths.
Bucket Dig Arm Dig Force (ISO) Number
Type Bucket Bucket Width Bucket Capacity Bucket Weight Force (ISO) 2.12 m (6 ft. 11 in.) Bucket Tip Radius of Teeth
mm in. m3 cu. yd. kg lb. kN lb. kN lb. mm in.
Heavy Duty 610 24 0.24 0.31 268 591 44 9,892 29 6,524 883 34.76 5
762 30 0.31 0.41 313 691 44 9,892 29 6,524 883 34.76 6
914 36 0.39 0.51 358 790 44 9,892 29 6,524 883 34.76 7
Ditching 1219 48 0.49 0.64 330 727 64 14,344 33 7,473 907 35.69 0
Bucket Selection Guide*

1.2
(1.50)
BUCKET SIZE m3 (cu. yd.)

1.0
(1.25)

0.8
(1.00)

0.6
(0.75)

0.4
(0.50) Deere 2.12-m (6 ft. 11 in.) Arm

0.2
(0.25)
lb./cu. yd. 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600 2,800 3,000 3,200 3,400 3,600
kg/m3 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
Wet Clay, Granite

Wet Sand, Gravel

Moist Sand
Limestone

Wet Earth

Wet Sand
Wet Peat

Dry Sand
Dry Clay
Topsoil

Caliche

Shale
Coal

*Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include
optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials,
and volume loading applications such as mass-excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level
applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.
 SPECIFICATIONS

Engine 85G
Manufacturer and Model Yanmar 4TNV98C-WHBW
Non-Road Emission Standard EPA Final Tier 4/EU Stage IV
Net Power (ISO 9249) 42.4 kW (56.9 hp) at 2,000 rpm
Cylinders 4
Displacement 3.3 L (202 cu. in.)
Aspiration Natural
Off-Level Capacity 70% (35 deg.)
Cooling
Variable-speed fan; viscous clutch
Powertrain
2-speed propel with automatic shift
Maximum Travel Speed
Low 3.1 km/h (1.9 mph)
High 5.0 km/h (3.1 mph)
Drawbar Pull 6650 kgf (14,661 lb.)
Hydraulics
Open center, load sensing
Main Pumps 3 variable-displacement axial-piston pumps
Maximum Pump Flow 2 x 72 + 56 L/m (2 x 19 + 15 gpm)
Pilot Pump 1 gear
Maximum Rated Flow 20 L/m (5.3 gpm)
System Relief Pressure 3900 kPa (566 psi)
System Operating Pressure
Implement Circuits 26 000 kPa (3,771 psi)
Travel Circuits 31 400 kPa (4,554 psi)
Swing Circuits 25 000 kPa (3,626 psi)
Controls Pilot levers, short stroke, low effort; hydraulic pilot controls with shutoff lever
Cylinders
Heat-treated, chrome-plated, polished cylinder rods; hardened steel (replaceable bushings) pivot pins
Bore Rod Diameter Stroke
Boom (1) 115 mm (4.5 in.) 65 mm (2.6 in.) 885 mm (34.8 in.)
Arm (1) 95 mm (3.7 in.) 60 mm (2.4 in.) 900 mm (35.4 in.)
Bucket (1) 85 mm (3.3 in.) 55 mm (2.2 in.) 730 mm (28.7 in.)
Electrical
Batteries 2 x 12 volt
Battery Capacity 2 x 450 CCA
Alternator Rating 50 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame
Undercarriage
Rollers (each side)
Carrier 1
Track 5
Shoes (each side) 40
Track
Adjustment Hydraulic
Chain Sealed and lubricated
Swing Mechanism
Swing Speed 10.5 rpm
Swing Torque 16 600 Nm (12,244 lb.-ft.)
Boom Swing
Left 60 deg.
Right 60 deg.

18
 SPECIFICATIONS
NS

Ground Pressure 85G

450-mm (18 in.) Rubber Crawler Pads 41.5 kPa (6.0 psi)
450-mm (18 in.) Continuous Rubber Belt 41.4 kPa (6.0 psi)
450-mm (18 in.) Triple Semi-Grouser Shoes 41.3 kPa (6.0 psi)
600-mm (24 in.) Triple Semi-Grouser Shoes 31.7 kPa (4.6 psi)
Serviceability
Refill Capacities
Fuel Tank 120 L (31.7 gal.)
Cooling System 9.7 L (2.6 gal.)
Engine Oil with Filter 12.3 L (3.2 gal.)
Hydraulic Tank 56 L (15 gal.)
Hydraulic System 103 L (27 gal.)
Propel Gearbox (each) 1.2 L (1.3 qt.)
Operating Weights
With 0.31-m3 (0.41 cu. yd. ), 762-mm (30 in.), 313-kg
(691 lb.) Bucket; 2.12-m (6 ft. 11 in.) Arm; 1408-kg (3,104 lb.)
Counterweight; Full Fuel Tank; and 75-kg (165 lb.) Operator
2220-mm (7 ft. 3 in.) Blade and 450-mm (18 in.) 8729 kg (19,244 lb.)
Rubber Crawler Pads
2220-mm (7 ft. 3 in.) Blade and 450-mm (18 in.) 8677 kg (19,130 lb.)
Triple Semi-Grouser Shoes
2470-mm (8 ft. 1 in.) blade and 600-mm (24 in.) 8874 kg (19,564 lb.)
Triple Semi-Grouser Shoes
2220-mm (7 ft. 3 in.) Blade and 450-mm (18 in.) 8701 kg (19,182 lb.)
Continuous Rubber Belt
Optional Components
Undercarriage (with the following)
450-mm (18 in.) Rubber Crawler Pads 2871 kg (6,329 lb.)
450-mm (18 in.) Continuous Rubber Belt 2843 kg (6,268 lb.)
450-mm (18 in.) Triple Semi-Grouser Shoes 2819 kg (6,215 lb.)
600-mm (24 in.) Triple Semi-Grouser Shoes 2970 kg (6,548 lb.)
1-Piece Boom (with arm cylinder) 491 kg (1,082 lb.)
2.12-m (6 ft. 11 in.) Arm with Bucket Cylinder and Linkage 275 kg (606 lb.)
Boom Lift Cylinder 89 kg (196 lb.)
0.49-m3 (0.64 cu. yd.), 1219-mm (48 in.) Ditching Bucket 330 kg (728 lb.)
Counterweight (standard) 1408 kg (3,104 lb.)
Operating Dimensions
Arm Length 2.12 m (6 ft. 11 in.)
Arm Digging Force (ISO) 30.7 kN (6,902 lb.) E
CENTERLINE OF SWING
Bucket Digging Force (ISO) 46.6 kN (10,476 lb.)
A Maximum Reach 7.70 m (25 ft. 3 in.)
A| Maximum Reach at Ground Level 7.55 m (24 ft. 9 in.)
B Maximum Digging Depth 4.51 m (14 ft. 10 in.)
B| Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom 4.20 m (13 ft. 9 in.)
C Maximum Cutting Height 7.14 m (23 ft. 5 in.) C
D Maximum Dumping Height 5.08 m (16 ft. 8 in.)
E Minimum Swing Radius 2.89 m (9 ft. 6 in.) D

F Maximum Vertical Wall 4.05 m (13 ft. 3 in.)

G Tail Swing Radius 1.49 m (4 ft. 11 in.)
GROUND LINE

A'
B' F
B A
 85G

Machine Dimensions 85G

Arm Length 2.12 m (6 ft. 11 in.)
A Overall Length 6.82 m (22 ft. 5 in.)
B Overall Height with 450-mm (18 in.) Rubber 2.61 m (8 ft. 7 in.)
Crawler Pads J D
C Undercarriage Width
With 450-mm (18 in.) Shoes 2.20 m (7 ft. 3 in.)
With 600-mm (24 in.) Shoes 2.35 m (7 ft. 9 in.)
D Rear-End Length/Swing Radius 1.49 m (4 ft. 11 in.) H G
B
E Distance Between Idler/Sprocket Centerline 2.29 m (7 ft. 6 in.)
F Undercarriage Length 2.92 m (9 ft. 7 in.)
G Counterweight Clearance 0.72 m (28 in.) I
H Cab Height 2.53 m (8 ft. 4 in.) O E
I Ground Clearance 360 mm (14 in.) K F
J Upperstructure Width 2.32 m (7 ft. 7 in.) C A
K Gauge Width 1.75 m (5 ft. 9 in.)
L Blade Lift Height 340 mm (13 in.)
Blade Height 460 mm (18 in.)
Blade Width
With 450-mm (18 in.) Shoes 2200 mm (7 ft. 3 in.) L
With 600-mm (24 in.) Shoes 2350 mm (7 ft. 9 in.)
M Blade Cut Below Grade 320 mm (13 in.)
N
N Blade Lift Angle 26 deg.
O Track Width
With 450-mm (18 in.) Shoes 0.45 m (18 in.) M
With 600-mm (24 in.) Shoes 0.60 m (24 in.)
Lift Capacities
Boldface type indicates hydraulically limited capacities; lightface type indicates stability-limited capacities, in kg (lb.). Ratings are at bucket lift hook, using standard
counterweight, situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87% of hydraulic capacity
or 75% of weight needed to tip machine. All lift capacities are based on ISO 10567.
HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION
1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.)
LOAD POINT HEIGHT Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
With 3.67-m (12 ft. 2 in.) boom, 2.12-m (6 ft. 11 in.) arm, 0.28-m3 (0.37 cu. yd.) bucket, 450-mm (18 in.) rubber pads, and 2200-mm (7 ft. 3 in.) blade
4.5 m (15 ft.) 1735 1656
(3,825) (3,651)
3.0 m (10 ft.) 2044 1597 1809 1022
(4,506) (3,521) (3,988) (2,253)
1.5 m (5 ft.) 2619 1488 1968 986
(5,773) (3,280) (4,339) (2,174)
Ground Line 2577 2445 2992 1403 2069 952
(5,682) (5,391) (6,597) (3,092) (4,561) (2,098)
–1.5 m (–5 ft.) 2683 2683 4770 2448 2868 1377
(5,914) (5,914) (10,516) (5,397) (6,322) (3,036)
–3.0 m (–10 ft.) 3130 3130
(7,012) (5,560)
With 3.67-m (12 ft. 2 in.) boom, 2.12-m (6 ft. 11 in.) arm, 0.28-m3 (0.37 cu. yd.) bucket, 600-mm (24 in.) shoes, and 2470-mm (8 ft. 1 in.) blade
4.5 m (15 ft.) 1735 1679
(3,825) (3,702)
3.0 m (10 ft.) 2044 1620 1809 1038
(4,506) (3,572) (3,988) (2,289)
1.5 m (5 ft.) 2619 1511 1968 1002
(5,773) (3,332) (4,339) (2,210)
Ground Line 2577 2485 2992 1426 2069 968
(5,682) (5,479) (6,597) (3,143) (4,561) (2,134)
–1.5 m (–5 ft.) 2683 2683 4770 2488 2868 1400
(5,914) (5,914) (10,516) (5,485) (6,322) (3,087)
–3.0 m (–10 ft.) 3130 3130
(7,012) (5,647)

20
 85G

Lift Capacities (continued) 85G

Boldface type indicates hydraulically limited capacities; lightface type indicates stability-limited capacities, in kg (lb.). Ratings are at bucket lift hook, using standard
counterweight, situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87% of hydraulic capacity or
75% of weight needed to tip machine. All lift capacities are based on ISO 10567.
HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION
1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.)
LOAD POINT HEIGHT Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
With 3.67-m (12 ft. 2 in.) boom, 2.12-m (6 ft. 11 in.) arm, less bucket, 450-mm (18 in.) continuous rubber belt, and 2200-mm (7 ft. 3 in.) blade
4.5 m (15 ft.) 1728 1579
(3,810) (3,480)
3.0 m (10 ft.) 2050 1520 1805 971
(4,520) (3,350) (3,980) (2,140)
1.5 m (5 ft.) 2626 1411 1969 934
(5,790) (3,110) (4,340) (2,060)
Ground Line 2595 2309 2994 1329 2068 903
(5,720) (5,090) (6,600) (2,930) (4,560) (1,990)
–1.5 m (–5 ft.) 2708 2708 4758 2309 2862 1306
(5,970) (5,970) (10,490) (5,090) (6,310) (2,880)
–3.0 m (–10 ft.) 3139 2386
(6,920) (5,260)
Buckets
A full line of buckets is offered to meet a wide variety of applications. Replaceable cutting edges are available through John Deere Parts. Optional side cutters add
150 mm (6 in.) to bucket widths.
Bucket Dig Arm Dig Force (ISO) Number
Type Bucket Bucket Width Bucket Capacity Bucket Weight Force (ISO) 2.12 m (6 ft. 11 in.) Bucket Tip Radius of Teeth
mm in. m3 cu. yd. kg lb. kN lb. kN lb. mm in.
Heavy Duty 610 24 0.31 0.40 287 633 54 12,061 32 7,162 1087 42.80 5
762 30 0.41 0.53 333 735 54 12,061 32 7,162 1087 42.80 6
914 36 0.50 0.66 380 837 54 12,061 32 7,162 1087 42.80 7
Ditching 1219 48 0.49 0.64 330 727 64 14,344 33 7,473 907 35.69 0
Bucket Selection Guide*

1.2
(1.50)
BUCKET SIZE m3 (cu. yd.)

1.0
(1.25)

0.8
(1.00)

0.6
(0.75)

0.4
(0.50) Deere 2.12-m (6 ft. 11 in.) Arm

0.2
(0.25)
lb./cu. yd. 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600 2,800 3,000 3,200 3,400 3,600
kg/m3 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
Wet Clay, Granite

Wet Sand, Gravel

Moist Sand
Limestone

Wet Earth

Wet Sand
Wet Peat

Dry Sand
Dry Clay
Topsoil

Caliche

Shale
Coal

*Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include
optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials,
and volume loading applications such as mass-excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level
applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.
Additional equipment
Key: l Standard s Optional or special See your John Deere dealer for further information.

75G 85G Engine 75G 85G Undercarriage (continued) 75G 85G Operator’s Station (continued)
l l Auto-idle system s s Rubber crawler pads, 450 mm (18 in.) l l Hydraulic warm-up control
l l Batteries (2 – 12 volt) s s Rubber belt, continuous, 450 mm (18 in.) l l Interior light
l l Coolant recovery tank Upperstructure l l Large cup holder
l l Single-element air filter l Counterweight, 1305 kg (2,877 lb.) l l Machine Information Center (MIC)
l l Electronic engine control l Counterweight, 1408 kg (3,104 lb.) l l Mode selectors (illuminated): Power
l l Enclosed fan guard (conforms to SAE l l Right- and left-hand mirrors modes (2) / Travel modes (2 with
J1308) l l Vandal locks with ignition key: Cab door / automatic shift) / Work mode (1)
l l Engine coolant to –37 deg. C (–34 deg. F) Engine hood / Fuel cap / Service doors l l Multifunction, color LCD monitor with:
l l Fuel filter with water separator l l Remote-mounted fuel filters Diagnostic capability / Multiple-language
l l Full-flow oil filter Front Attachments capabilities / Maintenance tracking /
l l Radiator and oil cooler with dust- l l Centralized lubrication system Clock / System monitoring with alarm
protective net l l Dirt seals on all bucket pins features: Auto-idle indicator, engine
air cleaner restriction indicator light,
l l Glow-plug start aid l l Oil-impregnated bushings
engine check, engine coolant temperature
l l 500-hour engine oil-change interval l l Reinforced resin thrust plates
indicator light with audible alarm, engine
l l 70% (35 deg.) off-level capacity l l Tungsten carbide thermal coating on
oil pressure indicator light with audible
l l Isolation mounted arm-to-bucket joint
alarm, low-alternator-charge indicator
Hydraulic System l l Arm, 2.12 m (6 ft. 11 in.)
light, low-fuel indicator light, fault-code
l l Reduced-drift valve for boom down, s s Attachment quick-couplers alert indicator, fuel-rate display, wiper-
arm in s s Buckets: Ditching / Heavy duty / mode indicator, work-lights-on indicator,
l l Auxiliary hydraulic valve section Heavy-duty high capacity / Side cutters and work-mode indicator
l l Spring-applied, hydraulically released and teeth
l l Motion alarm with cancel switch
automatic swing brake Operator’s Station (conforms to SAE J994)
l l Auxiliary hydraulic-flow adjustments l l Meets ISO 12117-2 for ROPS l l Auxiliary hydraulic control switches in
through monitor l l Adjustable independent control positions right console lever
l l 5,000-hour hydraulic oil-change interval (seat-to-pedals) l l SAE 2-lever control pattern
l l Auxiliary hydraulics l l AM/FM radio l l Seat belt, 51 mm (2 in.), retractable
l l Control pattern-change valve l l Auto climate control/air conditioner with l l Tinted glass
s s Hydraulic filter restriction indicator kit heater and pressurizer
l Transparent tinted overhead hatch
s s Load-lowering control device l l Built-in operator’s manual storage
l Transparent tinted overhead window
s s Single-pedal propel control compartment and manual
l l Hot/cold beverage compartment
Undercarriage l l Cell-phone power outlet, 12 volt, 60 watt,
5 amp s s Seat belt, 76 mm (3 in.), non-retractable
l l Planetary drive with axial piston motors s s Protection screens for cab front, rear,
l l Coat hook
l l Propel motor shields and side
l l Deluxe cloth suspension seat with
l l Spring-applied, hydraulically released s Window vandal-protection covers
adjustable armrests
automatic propel brake Electrical
l l Floor mat
l l 2-speed propel with automatic shift l l 50-amp alternator
l l Front windshield wiper with inter-
l l Upper carrier roller (1) l l Blade-type multi-fused circuits
mittent speeds
l l Sealed and lubricated track chain l l Positive-terminal battery covers
l l Gauges (illuminated): Engine coolant / Fuel
l l Undercarriage with blade Lights
l l Horn, electric
s s Triple semi-grouser shoes, 450 mm (18 in.) l l Work lights: Halogen / 1 mounted on
l l Hour meter, electric
s s Triple semi-grouser shoes, 600 mm (24 in.) boom / 1 mounted on frame
l l Hydraulic shutoff lever, all controls

Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions specified per ISO 9249.
No derating is required up to 3050-m (10,000 ft.) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications are
in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with standard equipment; 0.31-m3 (0.41 cu. yd.),
762-mm (30 in.), 313-kg (691 lb.) buckets; 450-mm (18 in.) rubber crawler pad shoes; 2.12-m (6 ft. 11 in.) arms; full fuel tanks; and 75-kg (165 lb.) operators;
a 75G unit with 1305-kg (2,877 lb.) counterweight; and an 85G unit with 1408-kg (3,104 lb.) counterweight. JohnDeere.com
08-08-19