IMC INSULATION

 Thermal and
 Acoustic Insulation
 Energy Conservation
 PAGE 2

IMC Blanket Insulation

IMC Glasswool blanket is a high resisting heat
resisting material, made of glass fibers
bonded with thermosetting resin into light-
weight, soft and resilient insulation with good
compression resistance thermal, acoustical
insulation and energy savings. It is light and
easy to install at office building, modern en-
tertainment , roof, HVAC system and also
other residential, industrial buildings.

Available Sizes
Density Thickness WxL
Kg/mᵌ mm mxm

12 50 1.2x30.0

12 100 1.2x15.0

16 25 1.2x30.0

16 50,75,100 1.2X15.0

24 25 1.2X30

24 50,75,100 1.2X15.0
32 25,50,75,100 1.2X15.0
Bare & with Aluminum Foil 48 25,50,75,100 1.2X7.5

APPLICATION
IMC Blanket & Board Insulation is designed for use in industrial and utility
application at operating temperature up to 230C (450F). Flexible blanket
insulation is suitable for use in panel system, flexible wrap, industrial ovens or
surface having irregularities. A semi-rigid blanket & board are suitable for
insulate equipment vessels and air-conditioning ductwork including other
industrial applications. A high strength rigid board is designed for use on
utility applications where high abuse resistance and good appearance is
required.

THERMAL INSULATION
IMC Microfiber Blanket and Board insulation provide low thermal conduc-
tivity, retard heat transfer, reduce operating cost, save energy and contrib-
ute to more comfortable working conditions around hot equipment and
utility applications.

ACOUSTIC INSULATION
The porous structure of fiberglass insulation helps reducing undesired noise
and sound transmission efficiently.

NON-COMBUSTIBLE SUBSTANCE
This is the benefit from fiber glass, so its non-combustible and fire retardant.

COMPRESSIVE STRENGTH
IMC Microfiber Blanket and Board insulation is flexible and resilient and
provides a good recovery after longtime compressive application.
SHOT FREE [VERY SHORT FIBER]
The virtual absence of shot and the consistent fibrous glass composition
enable IMC insulation to withstand the effects of sever temperature and
vibration without, slumping, clumping and breaking.
 PAGE 3

IMC Duct Board Insulation

IMC Glasswool board is semi-rigid and rigid insulation
board with high grade heat resisting material, made
of glass fibers bonded with thermosetting resin into
lightweight, soft and resilient insulation. Microfiber
board offers absorbing, spring, dissipating effects
and also noise control on acoustic absorption. Its is
available into various comprehensive density and
thickness ranges with a variety of facings to meet
our customer’s needs and expectations. Bare & with Aluminum Foil
Available Sizes
PRODUCT AVAILABLE
Density Thickness WxL
UBB: Unfaced Building Blanket
Kg/mᵌ mm mxm
UB: Unfaced Building Board
32 25,50,75*,100 1.2X 2.3
FSO: Foil Faced Blanket & Board (Foil Scrim Kraft
48 25,50,75* 1.2X2.3 one sided facing
64 25,50 1.2X2.3 *Other facings are available e.g. Double sided foil,
80 25,50 1.2X2.3 glass cloth, Perforated foil etc.

TECHNICAL DATA
Physical Properties Test Method Specifications
Maximum Service Tem- 232ᵒC (un faced)
perature
120ᵒC (foil faced)
Moisture Absorption ASTM C 1104 < 3% w/w at 40ᵒC
90%RH
Vapour Permeability of ASTM E 96 0.02 PER Maximum
Facing
Mold or Fungus Growth ASTM C 665 Will not support or
promote
Surface Burning Char- ASTM E 84
acteristics
Flame Spread Not exceed 25
Smoke Developed Not exceed 25

Fire Properties BS476 Part 6 Class “0” Fire rating

Fire Propagation
BS 476 Part 7:
Surface spread of flame

BOARD INSULATION (Lightweight & Semi-Rigid) BLANKET INSULATION (Lightweight & Semi-Rigid)

IMC Microfiber Density Thickness Width Length IMC Microfiber Density Thickness Width Length
Product Kg/mᶟ mm m m Product Kg/mᶟ mm m m
UBB 32 25 1.2 2.3
UBB 16 25 1.2 30
FSO 32 50 1.2 2.3
FSO 16 50 1.2 15
48 25 1.2 2.3
48 50 1.2 2.3 24 25 1.2 30
48 25 1.2 2.3 24 50 1.2 15
64 50 1.2 2.3 32 25 1.2 20
64 25 1.2 2.3
32 50 1.2 10
80 50 1.2 2.3
80 25 1.2 2.3 48 25 1.2 15
96 50 1.2 2.3 48 25 1.2 7.5
96 38 1.2 2.3
 PAGE 4

SOUND ABSORPTION COEFFICIENTS

Density Thickness Octave Band Center Frequencies, Hz

Kg/ mᶟ mm 125 250 500 100 2000 4000 NRC

0
16 50 0.24 0.54 0.81 0.87 0.91 0.92 0.78
24 25 0.17 0.33 0.64 0.83 0.90 0.92 0.70
50 0.22 0.87 0.98 1.02 0.98 1.00 0.90
48 25 0.11 0.28 0.68 0.90 0.93 0.96 0.70
50 0.17 0.86 1.14 1.07 1.02 1.98 1.00
96 25 0.02 0.27 0.63 0.85 0.93 0.95 0.65

Thermal Conductivity (k); W/m Thermal Resistance; m² K/W

At 24ᵒC Mean Temperature 25mm 50m 75mm 100m

m m
16 Kg / mᶟ 0.0380 0.668 1.337 2.005 2.674

24 Kg / mᶟ 0.0350 0.726 1.451 2.177 2.903

32 Kg / mᶟ 0.0330 0.770 1.539 2.309 3.079

48 Kg / mᶟ 0.0320 0.794 1.588 2.381 3.175

64 Kg / mᶟ 0.0310 0.819 1.639 2.458 3.277

80 Kg / mᶟ 0.0308 0.825 1.649

96 Kg / mᶟ 0.0308 0.825

Application Recommendation

IMC Microfiber blanket is lightweight and flexible insulation, applicable to use on vessels having
irregular surface where the high compressive strength is not a required performance.

IMC Microfiber Semi-rigid and high rigid board are usually installed on flat surface by impaling
over welded or fasten mechanical pins. They can be easily cut in segments and bended in
place of irregular surface.
Outer surface protection of unfaced insulation is required, applying with aluminum jacket,
metal cladding or water pool mastic.
Fasteners shall be located not less than 75mm(3”) from each edges or corners of the insulation.
Pin spacing along the equipment should be no longer than 300mm (12”) on centers. Additional
fasteners ma be required to hold the insulation tightly against the surface where cross breaking
is used for stiffening. Weld pin length must be selected to ensure tight fit but avoid “old-
canning”.

In multiple layers application, use faced material on outer layer only. Cover pins and clips with
vapor sealing pressure-sensitive patches matching insulation facing. Squeeze hardly with sealing
tool to ensure a tight bond and vapor seal. All insulation joints should be sealed with pressure-
sensitive joint sealing tape to match the insulation facing. Rub hard with a plastic sealing tool to
effect a tight bond. Recommended practice suggests 3” (76mm) wide tape on flat surfaces or
where edges are ship lapped and stapled. Use 5” (102mm) wide tape in lieu of ship lapping. If
insulation is being applied to sheet metal duct work, all sheet metal joints must be sealed prior
to insulating. Glass fabric and mastic may be used in lieu of pressure-sensitive tape.
 PAGE 5

IMC Duct Liner Board

Black Tissue
IMC Duct Liner
Board is a fiber glass
semi-rigid board
factory laminated
with a black glass
tissue on one side.
This fire retardant Fiber glass with Perforated Foil
mat is installed to-
ward the air steam. TECHNICAL DATA
Thermal Conductivity 32 Kg/mᶟ 48 Kg/mᶟ
PRODUCT AVAILABLE W/m.K 0.033 0.0320
Moisture Absorption <3% at 40ᵒC 90% RH
IMC Microfiber Density Thickness Size m Molds or fungus Growth Will not support pro-
mote
Product Kg/mᶟ mm Surface Burning characteris- ASTM E 84
BGT 32 25,50 1.2x2.3 tics
Flame Spread 25
48 25,50 1.2x2.3 Smoke Developed 50

TESTED VALUES—IMC DUCT LINER SOUND ABSORPTION COEFFICIENT

Product Coefficients at Octave Band Center Frequencies, Hz

Thickness 125 250 500 1000 2000 4000 NRC

25 mm 0.07 0.34 0.66 0.90 0.86 0.74 0.69

50 mm 0.12 0.65 0.91 0.98 0.94 0.59 0.85

DUCT LINER INSERTION LOSS, dB / Ft.

1 inch Liner 2 inch Liner
P / A Octave Band Center Frequencies, Hz Octave Band Center Frequencies, Hz
Thickness 125 250 500 1000 2000 4000 125 250 500 1000 2000 4000
2.2 3.3 6.2 7.6 7.5 4.0
8 1.2 1.6 3.0 7.6 7.5 4.0
6 0.9 1.3 2.6 6.2 5.9 3.5 1.6 2.6 5.4 6.2 5.9 3.5
4 0.6 1.0 2.1 4.7 4.3 2.9 1.0 1.9 4.4 4.7 4.3 2.9
2 0.3 0.6 1.5 2.9 2.5 2.1 0.5 1.1 3.1 2.9 2.5 2.1
1 0.2 0.3 1.0 1.8 1.4 1.5 0.2 0.6 2.2 1.8 1.4 1.5

TESTED VALUES—IMC DUCT LINER SOUND ABSORPTION COEFFICIENT

Product Coefficients at Octave Band Center Frequencies, Hz
Thickness 125 250 500 1000 2000 4000 NRC
25mm 0.07 0.34 0.66 0.90 0.86 0.74 0.69

50mm 0.12 0.65 0.91 0.98 0.94 0.59 0.85

 PAGE 6

Application:
IMC Duct Liner Board is designed for use as an acoustical and thermal insulation for sheet
metal heating, cooling air duct and plenums operating at velocities up to 2,000fpm (10/m/s)
and temperature up to120ᵒC.

Features & Benefits

•Acoustical Insulation IMC Duct Liner Board absorbs noise within duct, help creating quite
and comfortable environments.
•Thermal Performance IMC Duct Liner Board can reduce operating costs by lowering heat
gain through duct walls, conserving energy, eliminating or reducing the need for external

IMC Rigid Pipe Insulation

IMC Fiberglass Pipe Insulation is composed of glass fiber
molded into rigid, performed sections of specific diame-
ter and thickness. IMC Fiberglass Pipe Insulation is avail-
able in iron pipe size from ½ up to 18 inches, and wall
thickness range from 25-75 mm and also in both plain
and foil scrim Kraft jacket with an longitudinal over-
lapped flange.
Pipe Size

Inch mm 25 38 50 64 75

Application ½ 21.4 * * * * *

IMC Fiberglass Pipe Insulation is recommended for use on ¾ 27.0 * * * * *

all hot, cold concealed, and exposed piping operating
1 34.1 * * * * *
at temperature from -18C to 450C in residential, commer-
cial buildings and industrial facilities. Outdoor or direct 1¼ 42.9 * * * * *
bury applications are required additional waterproof
1½ 48.4 * * * * *
protection such as metal cladding or jacketing.
2 60.3 * * * * *
Features & Benefits
Thermal Performance: 2½ 73.0 * * * * *
IMC Fiberglass Pipe Insulation contributes to lower operat- 3 88.9 * * * * *
ing cost and increases efficiency of heating and cooling
3½ 101.6 * * * * *
equipment.
Condensation Control 4 114.3 * * * * *

Low permeance, abuse resistant jackets provide a posi- 5 141.3 * * * * *

tive vapor seal when properly installed. Condensation is 6 168.3 * * * * *
controlled, thereby maintaining thermal efficiency and
preventing dripping water. 7 193.7 * * * * *
Factory Applied Jackets 8 219.1 * * * * *
Greatly speed application, thereby reducing labor costs. 9 244.5 * * * * *
Factory rather than field application of jacketing ensures
a superior finished appearance and facilitates positive 10 273.1 * * * * *
closure of the vapor barrier. 12 323.9 * * * * *
Safe 14 355.6 * * * * *
IMC Fiberglass Pipe Insulation is non-combustible. Its low
16 381.0 * * * *
flame spread of both jacketed and unjacketed pipe insu-
lation ensure maximum safety in any type of construction. 18 406.4 * * * *
 PAGE 7

IMC Duct Liner Board

PHYSICAL PROPERTY
Property Test Method Specification

Operating Temperature range ASTM C411 18ᵒC to 450ᵒC (0 F to 850 F)

Facing Temperature Limitation ASTM C1136 -20C to 115ᵒC (-5 F to 240 F)

Moisture Sorption ASTM C1104 <1.5% by weight

Vapor Permeability ASTM E96 0.02 PERM maximum
Mold or Fungus Growth ASTM C665 Will not support or promote

Surface Burning ASTM E84* Flame Spread 25

Characteristic Smoke Developed 50

THERMAL PERFORMANCE
Insulation Pipe Operating Temperature, ᵒC (F)
NPS x Thickness 149 (300) 280 (500) 371 (700)
Inches HL ST HL ST HL ST
2 x ⅟₂ 74(77) 53(128)
Mean Temp. Thermal Conductivity
Btu-in/hr.ft²F 4x1 75(78) 43(109)
C F W / m.K
10 50 0.21 0.030 8x1 135(140) 44(112)
24 75 0.22 0.032
12 x 1 191(199) 45(113)
38 100 0.24 0.035
66 150 0.27 0.039 2 x 1 ⅟₂ 85(88) 47(116)
98 200 0.03 0.043 4 x 1 ⅟₂ 137(142) 51(123)
121 250 0.32 0.046
149 300 0.38 0.055 8 x 1 ⅟₂ 233(242) 53(128)
177 350 0.04 0.058 12 x 1 ⅟₂ 317(330) 54(129)
204 400 0.44 0.070
2x2 134(139) 53(137)
232 450 0.48 0.069
260 500 0.54 0.078 4 x 2 ⅟₂ 181(188) 52(125)

8 x 2 ⅟₂ 284(295) 54(129)

12 x 3 345(359) 52(125)

THICKNESS TO PREVENT SURFACE CONDESATION mm, (inch)

Ambient System Operating Temperatures
Temperature, Relative
ᵒC F Humidity 2ᵒC (35F) 7ᵒC (45F) 13ᵒC (55F)
43 (110) 50% - 70% 25 (1) 25 (1) 25 (1)
80% 38 (1⅟₂) 38 (1⅟₂) 25 (1)
90 % 89 (3⅟₂) 76 (3) 64 (1⅟₂)
38 (100) 50% - 70% 25 (1) 25 (1) 25 (1)
80% 38 (1⅟₂) 38 (1⅟₂) 25 (1)
90 % 76 (3⅟₂) 76 (3) 64 (1⅟₂)
32 (90) 50% - 70% 25 (1) 25 (1) 25 (1)
80% 38 (1⅟₂) 25 (1⅟₂) 25 (1)
90 % 76 (3) 64 (2⅟₂) 51 (2)
27 (80) 50% - 80% 25 (1) 25 (1) 25 (1)
90% 64 (2⅟₂) 51 (2) 38 (1⅟₂)
21 (70) 50% - 80% 25 (1) 25 (1) 25 (1)
90% 38 (1⅟₂) 38 (1⅟₂) 25 (1)
 IMC BUILDING#23 MANHATTAN ST., CUBAO, QUEZON CITY

WEBSITE: www.igros.asia
www.igrosmarketing.com
TEL NOS: (632) 410-3770 / 411-4883 / 410-2988
FAX NOS: (632) 414-8893/ 411-5870
EMAIL: [email protected]