This document summarizes an EOLS-GU-35-XX Series GPON ONU transceiver. It operates at 1.244Gbps upstream and 2.488Gbps downstream in an SFP package with an SC receptacle. Key features include a 1310nm burst mode transmitter and 1490nm continuous mode receiver using uncooled lasers and detectors. It complies with relevant ITU-T, IEEE, IEC and SFP MSA standards for GPON applications including fiber to the home, curb and office networks.
This document summarizes an EOLS-GU-35-XX Series GPON ONU transceiver. It operates at 1.244Gbps upstream and 2.488Gbps downstream in an SFP package with an SC receptacle. Key features include a 1310nm burst mode transmitter and 1490nm continuous mode receiver using uncooled lasers and detectors. It complies with relevant ITU-T, IEEE, IEC and SFP MSA standards for GPON applications including fiber to the home, curb and office networks.
This document summarizes an EOLS-GU-35-XX Series GPON ONU transceiver. It operates at 1.244Gbps upstream and 2.488Gbps downstream in an SFP package with an SC receptacle. Key features include a 1310nm burst mode transmitter and 1490nm continuous mode receiver using uncooled lasers and detectors. It complies with relevant ITU-T, IEEE, IEC and SFP MSA standards for GPON applications including fiber to the home, curb and office networks.
This document summarizes an EOLS-GU-35-XX Series GPON ONU transceiver. It operates at 1.244Gbps upstream and 2.488Gbps downstream in an SFP package with an SC receptacle. Key features include a 1310nm burst mode transmitter and 1490nm continuous mode receiver using uncooled lasers and detectors. It complies with relevant ITU-T, IEEE, IEC and SFP MSA standards for GPON applications including fiber to the home, curb and office networks.
EOLS-GU-35-XX Series Class C+ ONU for GPON Single Fiber Bi-Directional WDM Transceiver 1.244Gbps Upstream and 2.488Gbps Downstream RoHS6 Compliant
Features SFP Package With SC Receptacle
1.244Gbps, 1310nm Burst Mode Transmitter
2.488Gbps, 1490nm Continuous Mode
Receiver
Un-cooled DFB Laser and APD High
Sensitivity Detector
Class 1 FDA and IEC60825-1 Laser Safety
Compliant Applications Operating Case Temperature GPON System Standard: 0℃~+70℃ Fiber to the Home, Curb, Office (FTTx) Industry: -40℃~+85℃
Compliant with ITU-T G.984.2 and G.984.2
Amendent-2006
Compliant with SFP MSA Specification
Ordering Information Input/ Part No.*Note1 Burst-mode LOS/SD DDMI Interface Temp. Output EOLS-GU-35-D DC/AC LVTTL High Burst SD YES SC Standard EOLS-GU-35-DA DC/AC LVTTL Low Burst SD YES SC Standard EOLS-GU-35-DI DC/AC LVTTL High Burst SD YES SC Industry EOLS-GU-35-DIA DC/AC LVTTL Low Burst SD YES SC Industry EOLS-GU-35-DJ DC/AC LVTTL Low Burst LOS YES SC Standard EOLS-GU-35-DK DC/AC LVTTL High Burst LOS YES SC Standard EOLS-GU-35-DIJ DC/AC LVTTL Low Burst LOS YES SC Industry EOLS-GU-35-DIK DC/AC LVTTL High Burst LOS YES SC Industry Note1: Standard Version, For other ordering information in detail , please contact EOPTOLINK.
*The product image only for reference purpose.
Eoptolink Technology Inc., Ltd.
Page 1 of 8 V1.d GPON ONU Series Regulatory Compliance* Product Certificate Certificate Number Applicable Standard EN 60950-1:2006+A11+A1+A12+A2 TUV R50135086 EN 60825-1:2014 EN 60825-2:2004+A1+A2 UL 60950-1 UL E317337 CSA C22.2 No. 60950-1-07 EN 55022:2010 EMC CE AE 50285865 0001 EN 55024:2010 FCC WTF14F0514417E 47 CFR PART 15 OCT., 2013 FDA / CDRH 1040.10 ROHS / 2011/65/EU *The above certificate number updated to June 2014, because some certificate will be updated every year, such as FDA and ROHS. For the latest certification information, please check with Eoptolink.
Product Description Eoptolink’s high performance GPON ONU transceiver is designed for passive optical network application. It can fully support the Class C+ ODN application specified by the ITU-T G.984.2 standard and ITU-T G.984.2 Amendent1. It is fully compliant with IEEE 802.3ah-2004.
The GPON ONU transceiver is packaged of small form package with SC connector. The digital diagnostic monitoring function is fully compliant with SFP MSA.
The module consists of 1310nm un-cooled DFB Laser, InGaAs preamplifier and WDM filter in a high-integrated optical sub-assembly. It transmits 1.244Gbps at 1310nm in burst mode and receives 2.488Gbps at 1490nm in continuous mode.
Absolute Maximum Ratings*Note2
Parameter Symbol Min. Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 4.0 V Operating Relative Humidity - 95 % Wave Soldering Conditions Temp/Time - 260/10 °C/s *Note2: Exceeding any one of these values may destroy the device immediately.
Recommended Operating Conditions
Parameter Symbol Min. Typical Max. Unit Operating Case EOLS-GU-35-DX 0 - 70 Tc °C Temperature EOLS-GU-35-DIX -40 - 85 Power Supply Voltage VCC 3.15 3.3 3.45 V Power Supply Current ICC - - 300 mA Date Rate Upstream/Downstream - 1.244/2.488 - Gbps Eoptolink Technology Inc., Ltd. Page 2 of 8 V1.d GPON ONU Series Performance Specifications – Electrical Parameter Symbol Min. Typ. Max Unit Notes Transmitter LVPECL and CML Compatible Vin 300 - 1600 mVpp DC coupled inputs Inputs(Differential) Rin > 100 kohm @ Input Impedance (Differential) Zin 85 100 115 ohm DC Tx ON / Burst VIH 2 Vcc Enable EOLS-GU-XXDB/K Tx Off / Burst VIL 0 0.8 Burst Disable V Control Tx ON / Burst VIL 0 - 0.8 Enable EOLS-GU-XXDA/J Tx Off / Burst VIH 2 - Vcc Disable Receiver CML Outputs (Differential) Vout 600 - 1000 mVpp AC coupled outputs Output Impedance Zout 85 100 115 ohm (Differential) Normal 2 - Vcc+0.3 V RX_SD SD 0 - 0.8 V I2C Serial Logic SDA_H 2 - Vcc+0.3 V I2C Serial Data SDA_L 0 - 0.8 V SCL_H 2 - Vcc+0.3 V I2C Serial Clock SCL_L 0 - 0.8 V
Performance Specifications – Optical
Parameter Symbol Min. Typical Max. Unit Date Rate (Upstream/Downstream) R - 1.244/2488 - Gbps Transmitter Centre Wavelength λC 1280 1310 1360 nm -20dB Spectral Width Δλ - - 1 nm Side Mode Suppression Ratio SMSR 30 - - dB Average Output Power Pout 0.5 - 5 dBm Extinction Ratio*(Note4) ER 10 - - dB Rise/Fall Time (Optical, 10%~90%) tR,tF - 0.15 0.26 ns Output Optical Eye*(Note5) ITU-T G984.2 Compliant Optical Burst On/ Off Time t_on/t_off - - 12.8 ns Additive Jitter Generation JA - - 0.2 UI
Eoptolink Technology Inc., Ltd.
Page 3 of 8 V1.d GPON ONU Series Optical Output Power with TX OFF*(Note3) P_off - - -45 dBm Receiver Centre Wavelength λc 1480 1490 1500 nm Receiver Sensitivity*(Note6) Pmin - - -30 dBm Saturation Optical Power Pmax -8 - - dBm Damage Threshold PDT - - 4 dBm Receiver Reflectance CR - - -20 dB Polarization Dependent Loss PDL - - 0.5 dB LOS Assert LOSA -45 - dBm LOS De-Assert LOSD - -31 dBm LOS Hysteresis*(Note7) 0.5 2 6 dB. Note3: Measured with 9/125um G.652 SMF. Note4: Filtered, measured with PRBS223-1 test pattern @1.244Gbps. Note5: Eye Pattern Mask.
Note6: Measured with a PRBS 223 -1 test pattern @2.488Gbps and ER=10dB, BER 1X10-4. Note7: LOS Hysteresis(SD signal coincides with the LOS signal inversion)
Eoptolink Technology Inc., Ltd.
Page 4 of 8 V1.d GPON ONU Series Transmitter Burst Mode Timing Characteristics
Power Supply Burst control Data Input Optical Output
Power supply ＜ 3V X X OFF Disable X OFF Power supply ＞ 3.13V NO Other Enable Yes Laser bias and modulation signal output “X” means don’t care. “Other” means peak power less than +8dBm. “High/Low” means Logic high/low level. “No” means data not present, “Yes” means data present. “OFF” means the optical power less than -45dBm.
Burst transmitter timing
Enhanced Digital Diagnostic Interface
The memory map in the following describes an extension to the memory map defined in SFF-8472 MSA. The enhanced interface uses the two wire serial bus address 1010001X (A2H) to provide diagnostic information about the module’s present operating conditions.
Eoptolink Technology Inc., Ltd.
Page 5 of 8 V1.d GPON ONU Series
SFP Pin Function Definitions
Pin No. Pin Name Description 1 VeeT Tx Ground 2 Tx Fault Indicate the TX fail. LVTTL input. The default setting is that laser output is disable when this pin is asserted high and laser output is enabled when this pin is 3 Burst Control asserted low or laser output is disable when this pin is asserted low and laser output is enabled when this pin is asserted high.（BEN） 4 MOD_DEF(2) 2-Wire Serial Data I/O Pin.(SDA) 5 MOD_DEF(1) 2-Wire Serial Clock Input.(SCL) 6 MOD_DEF(0) Internally Grounded Tx Transmitter State Indication, Assert high when Transmitter ON. Or 7 TX_SD to the ground directly if not use. Set LOS is that active low when signal is detected. (LVTTL); While the setting is SD,it active high when signal is detected. 8 LOS/SD (LVTTL); Can be selected via specific part number. 9 NC Not Connect 10 VeeR Rx Ground 11 VeeR Rx Ground 12 RXD- Inverted Receiver Data Output (AC-Coupled internally) 13 RXD+ Non-Inverted Receiver Data Output (AC-Coupled internally) 14 VeeR Rx Ground 15 Vcc_RX Rx Vcc 16 Vcc_TX Tx Vcc 17 Veet Tx Ground 18 TXD+ Non-Inverted Transmitter Data Input (DC-Coupled) 19 TXD- Inverted Transmitter Data Input (DC-Coupled) 20 Veet Tx Ground F Mounting Studs
Eoptolink Technology Inc., Ltd.
Page 6 of 8 V1.d GPON ONU Series Recommend Circuit Schematic
Mechanical Specifications
SC Receptacle *This 2D drawing only for reference, please check with Eoptolink before ordering.
Eoptolink Technology Inc., Ltd.
Page 7 of 8 V1.d GPON ONU Series Laser Emission
Obtaining Document You can visit our website:http://www.eoptolink.com Or contact Eoptolink Technology Inc., Ltd. Listed at the end of the documentation to get the latest documents.
Revision History Revision Initiated Review Approve Description Release Date V1.a Oliver Lyn/Jason/Nygai Phlio Released Nov 19, 2015 Correct the pin7 definition and V1.b Angela Kelly/Vina/Dean Phlio update the July 21,2016 tolerance of 2D drawing. Change the BER V1.c Angela Phlio from 1x10-12 to July 28,2016 1x10-4 of note6. Update the V1.d Angela Kelly Phlio July 24,2017 LOSD.
Notice: Eoptolink reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
This Datasheet Is Presented by The Manufacturer Dieses Datenblatt Wird Vom Hersteller Bereitgestellt Cette Fiche Technique Est Présentée Par Le Fabricant
This Datasheet Is Presented by The Manufacturer Dieses Datenblatt Wird Vom Hersteller Bereitgestellt Cette Fiche Technique Est Présentée Par Le Fabricant
