Scribd
Upload
125 views3 pages

Earthing System Procedure

The document provides instructions for installing an effective earthing system in a house to prevent damage from fault currents. The key components of an earthing system include an earthing rod, earth wire, and earthing tools. The earthing rod should be buried in a pit filled with salt, sand and charcoal. An earth wire connects the earthing rod to the earthing bus in the main electrical box. Proper earthing helps ensure safety from electrical faults.

Uploaded by

alembrhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
125 views3 pages

Earthing System Procedure

The document provides instructions for installing an effective earthing system in a house to prevent damage from fault currents. The key components of an earthing system include an earthing rod, earth wire, and earthing tools. The earthing rod should be buried in a pit filled with salt, sand and charcoal. An earth wire connects the earthing rod to the earthing bus in the main electrical box. Proper earthing helps ensure safety from electrical faults.

Uploaded by

alembrhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

How to do Electrical Earthing in a house?

| Earthing System

Electrical Earthing should be done to prevent humans and other appliances from fault current and also
to prevent the damage caused by Fault current .

If you didn’t have an electrical earthing in your house, do it immediately as damage can occur at any
time.

Let us see how to do a perfect earthing system for a house.

Things needed:

1. Grounding Rod or Earthing Rod.


2. Earth Wire.
3. Earthing tools.
4. Earthing Salt, Charcoal.

1.Earthing Rod:

The Earthing Rod should possess the following specifications.

The diameter of an Earthing Rod should be 20mm.

The Length of an Earthing Rod should be 1500mm.

One end of the Rod should be conical structure.

The top of an Earthing Rod should have an adjustable clamp.


2. Earthing Wire:

The Earth Wire should be made of copper orGalvanised Iron.

Characteristics of an Earthing Wire:

 High Conductive Property.


 High Tensile Strength.
 Perfect Dimension.
 Resistant to corrosion.

3. Earthing Tools:

A tool is needed for adjusting the clamp. Example: The Spanner and the Cutting Pliers.

To check the continuity, A continuity tester can be used.

To make a pit, Shovel or Land Drilling Machine can be used. The earthing pit should be in the dimension
of 150cm x 15o cm x 300 cm.

4. Earthing Salt, Charcoal:

Both of them are good conductors of an electricity, in order to enhance the conductivity salt and
charcoal should be added.

(Charcoal contains carbon, salt contain ions)

Procedure to Electrical Earthing in a house:

Step 1 :

The first step involved in installing the Electrical Earthing in a house is to excavate a pit for burying an
Earthing rod or Earthing Electrode. The pit should be excavated near the house and the precautions
should be made in this. Before excavating, check whether any pipes are already placed underground.

The Pit should be 3 meters deep.

The shovel can be used on soft places and on rocky places, a land driller can be used but avoid using
rocky places, if there are no other ways means use rocky places.

Step 2 :

Put a layer of Salt , Sand, and Charcoal and then place an Earthing Electrode vertically inside the pit.
Cover the remaining Portions of the pit with a Salt, Sand and Charcoal combination.

If you are going to use construct a border using cement then don’t do that task now.
Step 3 :

Now, Connect the Earthing bus and an Earthing Rod with the help of Earth Wire. Earthing tools can be
used for adjusting the clamp.

Once done, use the Continuity tester and check the continuity.

Step 4:

Now it’s time for you to Construct a Concrete or cement border around the Pit.

Caution:

 While opening the main box be careful, as it deals with electricity.


 Follow the electrical Safety Rules without fail.
 If you are unfamiliar with technical terms, better contact a technician to do this task.

You might also like