MODEL 2100

Air & Vessel Traffic Management Systems

INSTRUMENT LANDING SYSTEM

Developed in cooperation with the FAA and certified for The 2100 combines ease-ofoperation and maintenance
Category I, II and III operation, the Series 2100 with increased performance and significantly reduced
Instrument Landing System (ILS) exceeds industry installation, maintenance and logistics costs, with
standards for reliability and performance, and is the ILS software designed and qualified to rigorous RTCA
of choice of the United States Air Force. DO-178 Level B/278 standards.

Additional features include:

PRODUCT OVERVIEW •• Dual and single equipment configurations
•• Dual and single frequency configurations
The Series 2100 Instrument Landing System (ILS) •• 8, 14, 16, and 20 element LPD antenna arrays
provides Category I, II and III performance in the most •• Null reference, capture effect, sideband reference
versatile and technically advanced system in the and end-fire glide slope configurations
industry today. Available in multiple configurations and •• Comprehensive RMM and PMDT (Portable
with a wide variety of antenna arrays, the 2100 is field Maintenance Data Terminal)
upgradeable from Category I to Categories II and III to -- Remote certification/control
meet changing operating conditions. -- Automatic fault diagnostics
-- Monitoring and recording
The 2100 provides user-friendly Windows™ based •• Seamless Category I - III upgradeability
interface, integrates the latest technical features and •• ILS equipment is U.S. Federal Aviation Administration
reduces system component content. certified, meets or exceeds ICAO Annex 10
recommendations and has been commissioned in
hundreds of locations worldwide.
MODEL 2100

LOCALIZER SPECIFICATION
Electrical
Primary power 90-264V AC ±15%, 47-63Hz, single phase
Standby power 24V DC no-break battery back-up system,
Mechanical
minimum 6 hr. operation
Weight - cabinet 193lbs (87.5kg)
Frequency stability ±0.0005%
Dimensions - cabinet (W x D x H) 24” x 24” x 24”
Power output 5W maximum (adjustable)
61cm x 61cm x 61cm
Frequency range 328.6 - 335.4MHz
Frequency control Synthesizer
Environmental
Modulation tones 90/150Hz navigation
Temperature Indoor equipment: -10°C to +55°C
Glide angle 2 to 4 degrees
Outdoor: -50°C to +70°C
Coverage Per ICAO Annex 10
Relative humidity Indoor equipment up to 90% noncondensing.
Equipment BITE with fault diagnostics to LRU capable of
Outdoor equipment up to 100%
being performed from a remote location
Altitude 0 to 4573m (0 to 15,000 ft) MSL.
Monitors Dual parallel AND/OR configuration,
Duty cycle Continuous, unattended
monitors standby transmitter and builtin test
Wind Up to 100mph (161km/hr), with 0.5”
generator for monitor certification
(12.7mm) ice
RMM Comprehensive, includes alarms and
Electrical
maintenance alerts with automatic dial out
Primary power 90-264V AC ±15%, 47-63Hz single phase
to any telephone number
Standby power 24V DC no-break battery back-up system,
Antennas
minimum 6hr operation
Configurations Null-Reference, Side-Band Reference,
Frequency stability ±0.0005%
Capture-Effect (M-array), and Non-Imaging
Power output 20W maximum (adjustable)
(Watts End Fire)
Frequency range 108 - 111.975MHz
Frequency control Synthesizer
Modulation tones 90/150HZ navigation, 1020Hz identification
Coverage Per ICAO Annex 10
Monitors Dual Parallel AND/OR configuration, MARKER BEACON SPECIFICATION
monitors standby transmitter and built-in test
Mechanical
generator for monitor certification
Weight - cabinet 50lbs (22.7kg)
RMM Comprehensive; includes alarms and
Dimensions - cabinet (W x D x H) 21.25 x 10” x 28.25”
maintenance alerts with automatic call out to
54cm x 25.4cm x 71.8cm
any telephone number
Environmental
Antennas
Temperature -50°C to +70°C
Configurations 8, 14, 16 or 20 element antenna array with
Relative humidity 0 to 100%
integral monitoring and optional near and far
Altitude 0 to 4573m (0 to 15,000 ft) MSL.
field monitoring
Duty cycle Continuous, unattended
Wind Up to 100mph (161km/hr)
Electrical
Primary power 120-240V AC ±15%, 47-63Hz, single phase

GLIDESLOPE SPECIFICATION Standby power

Operating frequency
12V DC no-break battery back-up system
75MHz
Mechanical Frequency stability ±0.0005%
Weight - cabinet 193lbs (87.5kg) Power output 2.5W maximum (adjustable)
Dimensions - cabinet (W x D x H) 24” x 24” x 24” Built in measuring equipment Audio Frequency Counter, Digital Voltmeter,
61cm x 61cm x 61cm Transmitter power meter, VSWR meter
Environmental RMM Comprehensive data to include alarms.
Temperature Indoor equipment: -10°C to +55°C Modulation capability 0% to 97% adjustable
Outdoor: -50°C to +70°C Polarization Horizontal
Relative humidity Indoor equipment up to 95% noncondensing. Keying for Outer Marker
Outdoor equipment up to 100% Middle Marker
Altitude 0 to 4573m (0 to 15,000 ft) MSL. Inner Marker
Duty cycle Continuous, unattended Fan Marker
Wind Up to 100mph (161km/hr) Coverage Per ICAO Annex 10

Follow us on:

For more information please email [email protected]

Selex ES Inc. - A Finmeccanica Company
11300 W. 89th Street - Overland Park - Kansas - 66214 - USA - Tel: 1-913-495-2600
667 Malenfant Blvd, Dieppe, NB E1A 5T8
We reserve the right to modify or revise all or part of this document without notice.

2015 © Copyright Selex ES Inc. www.selex-es.com SIS MM08439 11-15