Scribd
Upload
56 views2 pages

Section Member Design - SC1

This document summarizes the structural design checks for a hot rolled RHS 250x150x10 steel section with a yield strength of 275 MPa. It provides the design loads, section properties, and checks shear capacity, moment capacity, buckling resistance, tension capacity, and combination effects. All checks show the section has sufficient capacity for the given loads and satisfies design requirements.

Uploaded by

kc chan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Section Member Design - SC1

This document summarizes the structural design checks for a hot rolled RHS 250x150x10 steel section with a yield strength of 275 MPa. It provides the design loads, section properties, and checks shear capacity, moment capacity, buckling resistance, tension capacity, and combination effects. All checks show the section has sufficient capacity for the given loads and satisfies design requirements.

Uploaded by

kc chan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project: By: Job Ref:

Subject: Rev: Date :


SC1 ---

Member Checking to Structural Use of Steel 2011 (For Hot Rolled Section)
1.0 Design Data Section Mark :
1.1 Design Load (All loadings to be factored load)
Fc = 0 kN (-ve for Tension) Vx = 60 kN
Mxx = 75 kNm Vy = 0 kN
Myy = 0 kNm

1.2 Effective Length


Lx = 2.5 m
Ly = 2.5 m

1.3 Stiffener Spacing


a= 0 mm

2.0 Section Properties RHS 250x150x10 (Grade S275 )

D= 250 mm Zx = 494 cm3


B= 150 mm Zy = 367 cm3
t= 10 mm Sx = 611 cm3
Ix = 6174 cm4 Sy = 426 cm3
Iy = 2755 cm4 J= 6090 cm4
rx = 9.08 cm C= 605 cm3
ry = 6.06 cm
A= 74.9 cm2
Mass = 58.8 kg/m

3.0 Classification
py = 275 MPa
1/2
e = (275/py) = 1
b/t = 12 d/t= 22 => Class = 1
(< 28e)

4.0 Check Shear Capacity


Vc = pyAv/30.5

Shear in x-dir Capacity, Vcx = 206.4 kN (> 60kN ) (O.K.)


Shear in y-dir Capacity, Vcy = 365.2 kN (> 0kN ) (O.K.)

5.0 Check Shear Buckling Resistance of Web


d/t= 22
< 70e (Shear Buckling need not be checked)

P.1 (Ver1.1)
Project: By: Job Ref:

Subject: Rev: Date :


SC1 ---

6.0 Check Moment Capacity


In y-direction :
Vy/Vcy = 0 <0.6 (Low shear condition)
Class = 1
pySx = 168 kNm 1.2pyZx = 163 kNm
=> Mcx = 163 kNm (>75kNm) (O.K.)
In x-direction :
Vx/Vcx = 0.291 <0.6 (Low shear condition)
Class = 1
pySy = 117.2 kNm 1.2pyZy = 121.1 kNm
=> Mcy = 117.2 kNm (>0kNm) (O.K.)

7.0 Check Resistance to Lateral Torsional Buckling


D/B= 1.67 LE/ry= 41.3
(<435e2 ) (Lateral Torsional Buckling need not be checked)

8.0 Check Tension


Pt= pyA= 2060 kN (>0kN) (O.K.)

9.0 Check Combination Effect


Ft/Pt= 0
Mxx/Mcx= 0.46
Myy/Mcy= 0
Total = 0.46 (<=1.0) (O.K.)

P.2 (Ver1.1)

You might also like