WS-6960

USER‘S MANUAL
 contents
1 GUIDE....................................................................................................1
1.1 Important Safety Instructions...........................................1
1.2 Unpacking.................................................................................2
1.3 PRODUCT OVERVIEW&ILLUSTRATION.......................3
1.4 INSTALLATION OFMETER..................................................5
2 OUTLINE..............................................................................................5
3. THE MENU OSD INSTRUCTION................................................6
3.1 Satellite Find...........................................................................7
3.1.1 Satellite.............................................................................8
3.1.2 Local Frequency...........................................................8
3.1.3 Transponder...................................................................9
3.1.4 Frequency........................................................................9
3.1.5 Symbrate..........................................................................9
3.1.6 Polarity.......................................................................... 10
3.1.7 TONE.............................................................................. 10
3.1.8 Beep Tone..................................................................... 10
3.1.9 DiSEqC Mode............................................................... 10
3.1.10 DisEqc type & Input.............................................. 10
3.1.0.1 Quick Search........................................................... 11
3.2 Program Info........................................................................ 13
3.3 Channel.................................................................................. 13
3.3.1 TV List & Radio List................................................. 13
3.3.1.1 Sort.............................................................................. 14
3.3.1.2 Lock............................................................................. 15
3.3.1.3 Del................................................................................ 15
3.3.1.4 Sat................................................................................ 16
3.3.2 EPG.................................................................................. 16
3.4 SAT/TP Manager................................................................ 17
 3.4.1 Satellite Setting........................................................... 17
3.4.2 Auto Scan....................................................................... 20
3.4.3 Transponder................................................................. 21
3.5 Multimedia............................................................................. 23
3.6 System Setting...................................................................... 24
4 Technical Specification............................................................... 28
5 Trouble Shooting........................................................................... 30
 Digital Satellite Finder

1 GUIDE
1.1 Important Safety Instructions
Thank you for choosing our product. Before installation, we
would like to remind you some notes, which is very important
for operating safely and properly, as follows:
g Be sure to read this user manual before starting your
operation.
g You must install the dish with correct direction and angle. If
the dish is not working properly, contact your local dealer.
g When the unit is suddenly moved to a hot area from a cold
area, it may cause some problems. In that case, turn off the
power, and turn on again after 1-2 hours.
g Keep meter placed in clean space with sufficient ventilation.
g Do not cover the meter with or place it on a unit that emits
heat.
g Clean the case by a soft cloth with a little washing liquid.
g Do not remove the cover.
g Do not let the unit exposed to extreme heat, cold or humid
conditions.
g No liquids or any other materials to come inside of the unit.

WARNING:All instructions are subject to the latest version of

software without prior notice if any new functions are added to
the equipment.

1
 Digital Satellite Finder

1.2 Unpacking
Open the package and make sure it includes all below items, if
any missing, please contact the reseller for replacement.
1.Digital Satellite Meter
2.User’s manual
3.AV cable
4.Car charger cable
5.Power Adaptor
6.F connector
7.Strap of carrying case

2
 Digital Satellite Finder

1.3 PRODUCT OVERVIEW& ILLUSTRATION

3
 Digital Satellite Finder

NO Description FUNCTION
1 LNB IN Connect to satellite antenna cable
2 AV OUT Connect to AV port for TV
3 AV IN Connect to AV port for meter
4 HDMI Use HDMI cable to connect for TV
5 Power witch Turn on/off meter
6 USB Port Connect to USB memory
7 DC Slot Connect to Adaptor Input
8 Torch LED Night lighting
9 Speaker Speaker Integrated
10 Power Power indicator light
11 22KHZ 22Khz indicator light
12 13V/18V Vertical /Horizontal polarization
voltage output light
13 LOCK Signal lock indicator ligh
14 Charger (Note1) Charger indicator light
15 Red & TTXT Red KEY &Teletextinterface
16 Green & SUBT Green key & Subtitle interface
17 Orange &TV/R Orange key & TV and radio switch
18 BLUE &AUDIO Blue key & Audio interface
19 AV-S(Note2) If we connect AV IN; switch AV in/out
for LCD and speaker
20 INFO To display channel status or various
program information of current
channel
21 MUTE MUTE
22 MENU Show the main menu on the screen or
jump back to previous menu in sub-
menu setting conditions

4
 Digital Satellite Finder

23 EXIT Escape from present menu and save

the settings
24 NEVIGATION Volume Control or move cursor,
KEY channel or change, confirm etc
25 0-9 Select channels or enter programming
26 SCAN ‘Quick Search’ menu shortcut key
27 F1 Auxiliary function key
28 F2 Auxiliary function key
29 F3 Auxiliary function key
30 F4 Auxiliary function key
31 LCD TFT LCD Screen
32 When power on the meter ,displays
the battery level

Note1:When the adapter insert dc slot, Charge indicator is

often bright, when the batteries charged sufficient, the charge
indicator is go out.
Note2: In the AV out mode, speaker is off.

5
 Digital Satellite Finder

1.4 INSTALLATION OFMETE

2.OUTLINE
g 4.3 Inch High Definition TFT LCD Screen
g Fully DVB-S/DVB-S2, MPEG-2/MPEG4 compliant
g MPEG-2 / H.264 Hardware decoding
g Digital meter for signal strength and quality
g Supports scan of Auto,Blind,Manual or NIT
g Sound and Light Alarm for Locking Signal
g Auto Calculate Angle of AZ ,EL
g Supports DISEQC 1.0/1.1/1.2 ,0/22khz Tone
g Speaker Integrated
g Support both AV out and AV in
g LNB short protect
g 7.4V/3000mAh Li-Ion Battery Included
g Software upgrade via USB port
g Easy to carry

6
 Digital Satellite Finder

3. THE MENU OSD INSTRUCTION

If you have installed and connected the cables of the meter,
pressing MENU key to display the Main Menu.
As shown in figure PIC<1>.

g Satellite Find
g Program Info
g Channel
g Sat/TP Manage
g Multimedia
g System Setting
Press the keys of ▲▼◄► to move the cursor up or down in
the menu interface, then use OK key to confirm a selection.
3.1 Satellite Find
As shown in figure PIC<2, 3>.

7
 Digital Satellite Finder

3.1.1 Satellite
As shown in figure PIC<4>.
Press ◄►key into the satellite list. Use ▲▼ key to move
the cursor, then press OK key to select the satellite of you
want.

3.1.2 Local Frequency

As shown in figure PIC<5>.
Press ◄► key into the LNB list. Use ▲▼ key to move the
cursor then pressOK key to select the LNB of you want.

8
 Digital Satellite Finder

3.1.3 Transponder
As shown in figure PIC<6>.
Press ◄► key into the TP list. Use ▲▼ key to move the cursor
then pressOK key to select the satellite of you want.

3.1.4 Frequency
Frequency of the current transport, Input the value by using
the numeric keys.
3.1.5 Symbrate
Symbol rate of the current transport, Input the value by using
the nu¬meric keys.

9
 Digital Satellite Finder

3.1.6 Polarity
Press ◄► key to changeVertical or horizontal of polarization.
3.1.7 TONE
Press ◄► key to on or off22kHz TONE Switch.
3.1.8 Beep Tone
Press ◄► key to Switch beep tone. If we open the beep tone;
when we into the search screen, the beep of lock alarm will
open.
3.1.9 DiSEqC Mode
Press ◄► key toset the port type diseqc1.0/1.1 or unicable
3.1.10DisEqc type & Input
As shown in figure PIC<7>.

If we select diseqc1.0/1.1; we can press ◄► key toset the port

number. If select unicable,we can press ◄►to select IF Channel;
and use number key to input center Frequency.

10
 Digital Satellite Finder

3.1.0.1 Quick Search

As shown in figure PIC<8>.
In the satellite Find interface,pressing OK key will into the
quick search.
If you set the local Longitude and Latitude Under the system
setting, the angle of LNB, theorientation and elevation of
antenna, all will be display on the screen.

TP Scan : Press the red key to search the current TP.As shown
in figure PIC<9>.
Auto :Press the green key to auto blind search the current
satellite.As shown in figure PIC<10>.

11
 Digital Satellite Finder

S/Q: Press the orange key to enlarge showing of thesignal

strength and quality. As shown in figure PIC<11>.
Constellation: Press blue key into the constellation.As shown
in figure PIC<12>.

12
 Digital Satellite Finder

3.2 Program Info

As shown in figure PIC<13>.
In the Program Info we can check the info of the current TV.

3.3 Channel
As shown in figure PIC<14>.

g TV List
g Radio List
g EPG

3.3.1 TV List & Radio List

In the TV mode into the CH List is edit TV program, in the
radio mode is processing radio program.As shown in figure
PIC<15, 16>.

13
 Digital Satellite Finder

3.3.1.1Sort
As shown in figure PIC<17>.
Press red key into the sort list. Use ▲▼ key to move the cursor,
then press OK key to select the sort type of we want; then press
ok key to confirm or move the cursor to “x” press ok key to
cancel.

14
 Digital Satellite Finder

3.3.1.2 Lock
As shown in figure PIC<18>.
Press ▲▼ key to the program that we want lock or unlock,
then press green key to lock or unlock the program. When we
deal with all the program need to be processed, press menu
key to then press ok key to confirm the operation or select “x”;
press ok key to cancel.

3.3.1.3 Del
As shown in figure PIC<19>.
Press orange key to select“Delete Select” or “Delete ALL”.Press
▲▼ key to select the program that we wantto delete, then
press orange key to label. When we deal with all the program
need to be processed, press menu key to then press ok key to
confirm the operation or select “x”; press ok key to cancel.

15
 Digital Satellite Finder

3.3.1.4 Sat
As shown in figure PIC<20>.
Press blue key then press ◄► key to select program list of
the single satellite, or all satellite.

3.3.2 EPG
As shown in figure PIC<21>.
Press ▲▼ key to change program. If the current program
has EPG info, it will appear on the right side of the
window.Press ◄► key to change the day of the EPG info.

16
 Digital Satellite Finder

3.4 SAT/TP Manager

As shown in figure PIC<22>.

∙Satellite Setting
∙Auto Scan
∙Transponder

3.4.1 Satellite Setting

In the all Satellites Setting:
As shown in figure PIC<23>.
Press blue key to clear all selecte of satellite.
Press orange key to selecte all satellites.
Press green key into auto scan interface.
Press red key into the Transponder interface.

17
 Digital Satellite Finder

Press ▲▼ key to move the cursor, then press ok key to

change the satellite select or unselect.

Press ◄► to set the single satellite setting:

As shown in figure PIC<24>.
In the setting interface:
1, TP Manage: press red key into TP manager.
2, Auto Scan: press green key into auto scan..
3, LNB: Press ◄► key then change the LNB frequency.
4, Transponder: Press ◄► key then change the current TP.
5, DiSEqc1.0: Press ◄► key to change the DiSEqC port.
6,DiSEqc1.1: Press ◄► key to change the DiSEqC port.
7, Motor: Press ◄► key to change the DiSEqC port.

18
 Digital Satellite Finder

If we select DiSEqC1.2/USALS, press ok into the motor

interface.As shown in figure PIC<25>.
○ Transponder: Press ok key to change the current TP.
○ Mode: A, Position
A1 Direction:Press ◄► key to move direction to west or east.
A2 Position: set the satellite save position.
A3 Store: save the satellite position to set of A2.
○ Mode: B, Drive to Zero; move the cursor to GO, then press
OK key, the motor will go to zero.
○ Mode: C,Drive to stored position; move the cursor to GO,
then press OK key, the motor will go to position of we saving
in mode A Position.
○ Mode: D, Drive to Satellite move the cursor to GO, then
press OK key, the motor will go to position of auto calculate.
D1 Direction:Press ◄► key to move direction to west or east.
○ Mode: E, Set East Limit or Set west Limit, limit the motor
move to east or to west.
E1 Direction:Press ◄► key to move direction to west or east.
E2 Store: save the satellite position of A2
○ Mode: F, Set Limit enable or disable, set the limit enable or
disable,

19
 Digital Satellite Finder

8, Unicable: Press ◄► key to select unicalbe then press OK

key into the unicable setting.As shown in figure PIC<26>.
Transponder: press ◄► key to change the current TP.
IF Channel: press ◄► key to change changer SCR channel.
Center Frequency: use value key to input number.
Store: store the setting.

3.4.2 Auto Scan

As shown in figure PIC<27>.
○ Satellite：Press ◄►key into the satellite list. Use ▲▼ key
to move the cursor, then press OK key to select the satellite of
you want.
○ Transponder: press ◄► key into the TP list. Use ▲▼ key
to move the cursor then pressOK key to select the satellite of
you want.
○ NIT: press ◄► key to switch network searcher on/off
○ Program: TV search type ALL/FTA
○ Scan Mode: scan mode select, we can select Default TP /
One TP/Blind.
○ Scan Select: scan all satellites of selected or the current
satellite.

20
 Digital Satellite Finder

3.4.3 Transponder
As shown in figure PIC<28>.
Press ▲▼ key to select the current satellite.
Press red key to edit satellite,as shown in figure PIC<29>.
W-E: switch the satellite longitude west or east.
Longitude; use number key input value.
Satellite Name: press ok will open the keyboard; use the
direction key input satellite name.
○ Press green key to delete satellite, then press ok key to
confirm or press menu key to cancel.
○ Press orange key to add a satellite。

21
 Digital Satellite Finder

As shown in figure PIC<30>.

NO.: Satellite number.
W-E: switch the satellite longitude west or east.
Longitude; use number key input value.
Satellite Name: press ok will open the keyboard; use the
direction key input satellite name.
○ Press blue key into auto scan interface.

Press ◄►key to TP manager,as shown in figure PIC<31>.

○ Press red key to edit TP
NO.: TP number.
Frequency: use number key input value.

22
 Digital Satellite Finder

Symbol Rate: use number key input value.

Polarity: Press ◄► to change polarity
○ Press green key to delete TP, then press ok key to confirm
or press menu key to cancel.
○ Press orange key to add a TP；Please refer to TP edit
operations.
○ Press blue key into TP scan interface.

3.5 Multimedia
Will need to play the files in the USB stick and insert it into
the machine.As shown in figure PIC<32>.

23
 Digital Satellite Finder

○ Movie
As shown in figure PIC<33>.
Press red key to option the mode of play files and text encode;
then press menu key return.
Press green key to Change the folder File view to detailed list.
Press orange key to change mode to big Icon browsing.
Press the arrow keys to move the cursor, then press ok key to
enter the file.
In the pay interface:
F1 Key: normal play.
F2 Key: pause.
F3 Key: fast backward; press F1 key to return normal play.
F4 Key: fast forward; press F1 key to returnnormal play.
○ Music &Photo
Please refer to the Movie operating.
3.6 System Setting
As shown in figure PIC<34>.
○ Country Setting
Press ◄► key to change the country.

24
 Digital Satellite Finder

○ OSD Language
Press ◄► key to change the OSD Language.
○ TV Format
Press ◄► key to change the TV Format.
○ Video Output
If we connect HDMI interface, we can press ◄► key.
○ TV Resolution
On the basis of the Video Output choice, we can press ◄►
key to change the TV resolution.
○ Digital Audio Output
Press ◄► key to change the LPCM or RAW format.
○ Time Zone
Press ◄► key to change the Time Zone.
○ PWR Unit
Press ◄► key to change the PWR unit.
○ Flashlight
Press ◄► key to switch Flashlight on/off.

25
 Digital Satellite Finder

○ KB-BackLight
Press ◄► key to switch delay time of back light.
○ Set Location
As shown in figure PIC<35>.
Press ◄► or ok key to set location longitude or latitude
Location: we can press ◄► to change the city, then auto
select longitude and latitude.
Longitude: we can use number key input value then select
west or east.
Latitude: we can use number key input value then select south
or north.

○Upgrade
As shown in figure PIC<36>.
Will update the file into the U disk; then insert the machine;
press ok key to update interface, use the direction key to
select update file. Press ok key to update.
Warning: During the upgrade processing, do not power off
or pull out the U disk;otherwise it will damage the machine
software, cannot boot.

26
 Digital Satellite Finder

○ Factory Setting
Press ◄► key, then press ok key to confirm factory.
NOTE: if you set factory, all the user settings and the database
will be reset.

27
 Digital Satellite Finder

4.Technical Specification
TRANSMISSION STANDARDS
DVB-S2/S, MPEG-2,MPEG-4,H.264
SATELLITE INPUT/DEMODULATION
Connector Type F Type
Input Frequency 950 to 2150 MHz
Signal Input Level - 65 to -25 dBm
Band Switch Control 22KHz
LNB Supply 13V/18V, IMax 400mA
Demodulation Type QPSK,8PSK
Symbol Rate 2<Rs<45Mband(SCPC/MCPC)
LCD FEATURES
LCD Type TFT TRANSMISSIVE
Number of Dots 480(RGB) x272
Active area (WxH) 95.04x53.86 mm2
AV output interface
Connector Type 3.5 mm jack
Video Output CVBS
Audio output Stereo Audio L/R output
HDMI output connecter
Format HDMI 1.3
AV input interface
Connector Type 3.5 mm jack
Video input CVBS,
Audio input Stereo Audio L/R input
AUDIO/VIDEO PROCESSING
Video decompression MPEG-2 MP@HL, MPEG-1
Decoding,MPEG-4 ASP@L5 HD
resolution,H.264 MP&HP@L4,HW JPEG
decoding

28
 Digital Satellite Finder

Resolving rate PAL-25 frame@720*576,NTSC-30

frame@720*480,
Signal compatibility Support conversion for different video
formats
Video Format 4:3,16:9,By Pan & Scan and Letter Box
conversion
Audio decompression MPEG-1 Layer I/II ，MPEG-2 Layer I/II,
Audio output mode Stereo, Mono,R/L
DATA SERVICE PORT
Connector USB
Data protocol USB2.0 interface
File management system NTFS,FAT32,FAT16
file format wma,mp3,mp4,avi,jpg,jpeg,bmp,img
MICROPROCESSOR
Microprocessor 78326SZ
Clock Frequency 550MHz
SDRAM Memory DDR2 512Mbit
Power SUPPLY
Li-Ion Battery 7.4V/3000mAh
Adapter OUTPUT :DC12V/1.5A,
INTUPT :100-240VAC 50/60Hz
Power consumption Max. 10W
PHYSICAL CHARACERSTICS
Size (W x D x H) 125x205x4.5(cm3)
Net Weight 0.66kg

29
 Digital Satellite Finder

5 .Trouble Shooting
Problem Possible Causes What To Do
No display light Power switch is Check to make sure power on.
up not onRun out of Even on adapter
batteries

No sound or AV IN jack insert, Pull out AV IN cable

picture, but the but no
front panel power video input
light is ON.

No sound or The satellite dish Adjust the dish. Check the

picture is not pointing at Signal Level in the Antenna
the satellite. Setup Menu

Bad picture/ No signal or weak Check the cable connections.

Blocking Error signal LNB and other equipment
connected between the LNB and
the meter and adjust the dish.
The satellite dish Adjust the dish.
in not pointing at
the satellite
Signal is too Connect a signal attenuator to
strong the LNB input
Satellite dish is Change to a larger dish
too small
LNB noise factor Change to an LNB with lower
too high. noise factor
The LNB is faulty. Change the LNB

30
 Digital Satellite Finder

AV out No The system is Check the UHF channel fixed in

picture(Video) connected by your system and tune the UHF
SCART cable and properly.
TV is not in AV
mode.
The key is not Out of battery Even on adapter
working. Key blocks make sure no blocks between
the front panel

Note: If you still cannot resolve the problem with above

reference. Please contact the local dealer or their after-sales
service center.

31
USER‘S MANUAL