FS22DI. FiberSensing

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

FS22DI

Industrial BraggMETER DI

Special features

- Up to 8 optical connectors with parallel


acquisition

Data sheet
- Dynamic selectable acquisition rates up
to 1000 S/s
- NTP synchronization
- Catman® compatibility

Description
FS22DI Industrial BraggMETER Interrogators are specifically designed to interrogate Fiber Bragg Grating (FBG)
sensors. Based on continuous swept laser scanning technology, these Interrogators include a traceable wave­
length reference that provides continuous calibration and ensures system accuracy over long term operation. The
combination of high dynamic range and high output power allow high resolution to be attained even for long fiber
leads and/or lossy connections.
HBK FiberSensing Industrial BraggMETER interrogators run on a real-time operating system for consistent and
deterministic acquisition of a large number of sensors provided by the combination of a broadband tuning range
and the simultaneous and parallel acquisition over 1, 4 or 8 optical connectors.

Benefits and applications Fiber Bragg grating technology


S Laboratory and field deployment in Civil, Aeronau­ S Absolute reference measurement
tics, Energy and R&D applications S Insensitive to EM/RF interferences
S Full control through SCPI Commands for integration S Passive (can be used in Ex-areas)
in user’s own software
S Intrinsic multiplexing capability reducing cabling
S Multiple device or hybrid (electrical+optical) mea­ requirements
surements possible by combining and synchronizing
multiple interrogators and other HBK data acquisition S Long distances between sensors and the inter­
devices rogators possible
S Combination of different sensor measurands

OPTO-ELECTRONIC FPGA POWER

LASER

TUNABLE
FILTER

FC/APC LAN
A/D
PHOTODIODE

FC/APC
A/D
PHOTODIODE
...

B04202_05_E00_00 12.11.2021
Specifications
General
Measurement range nm 100 [1500 … 1600]
Resolution/Repeatability1) pm <1.5
Stability/Reproducibility1) pm 5
Optical connectors (simultaneous acquisition) n.a. 1, 4 or 8; FC/APC or SC/APC
Sample rate2) S/s 1000 500 200 100 50
Max. # sensors/OC n.a. 31 63 127 127 127
Max # sensors total n.a. 803) 96 200 400 600
Optical detection method n.a. Linear (selectable gain steps)
Dynamic range4) dB > 25
OSA5) n.a. Yes
Max. Optical Output Power dBm One connector: 3; Four connectors: -1; Eight connectors: -4.5
Power supply VDC Standard: 11 … 36; Rack-Mountable: 100 … 240 (50 … 60Hz)
Power connector n.a. Standard: ODU Medi‐Snap S11M08-P04MJGO-52807);
Rack-Mountable: C14 (IEC/EN 60320-1)8)
Consumption6) W Nominal: 22.5; Stand by: 2
Communication n.a. Ethernet (RJ45); SCPI9) (ASCII textual strings) over TCP/IP
Synchronization n.a. NTP
Environmental and mechanical
Operation and storage temperature ºC 0 … 50; -20 … 70
Operation and storage humidity % < 90% (at 40 ºC); < 95% (non-condensing)
Shock resistance10) (EN60068-2-27) n.a. 20 g (in each axis); 11 ms pulse
Sinusoidal vibration resistance10) n.a. 2.5 g (5 Hz … 65 Hz); 30 min/axis
(EN60068-2-6)
Random vibration resistance10) n.a. 9 g (10 Hz … 500 Hz); Power Spectral Density=1g2/Hz
(EN60068-2-64)
Dimensions (W x H x D) mm Standard: 155 x 125 x 275; Rack-Mountable: 483 x 88 x 400
Weight kg Standard (w/o mounting brackets): 4.5; Rack-Mountable: 7
Enclosure Material n.a. Aluminum
Degree of protection (EN60529; IEC529) Standard: IP40; Rack-Mountable: IP20
EMC requirements n.a. Per EN 61326
1) Measurements carried out using calibrated instrument against a NIST traceable gas cell. Accuracy as per NIST Technical Note 1297. Further
details on HBK FiberSensing technical notes.
2) All available, user selectable.
3) When operating the device with catman or SCPI commands with binary reply. The maximum number of sensors at 1000 S/s acquisition rate
is limited to 48 when operating the device with BraggMONITOR DI or SCPI commands with ASCII reply.
4) Considered as the ratio between the optical power emitted at an optical connector and the minimum detectable optical power reflected by a
fiber Bragg grating.
5) Optical Spectral Analysis (1S/s refresh rate; 7050 points per sample, ~15 pm resolution)
6) Typical values. Peak consumption may reach 50 W (during start up).
7) Supplied with 100 … 240 V power adapter with international AC plugs and 1.5 m cable length. For additional orders use 1-NTX001 material
number.
8) Supplied with Type F plug cable. Different plug format can be added upon request.
9) Standard Commands for Programmable Instruments.
10) During tests the interrogator is powered off. The correct functioning of the equipment is confirmed after the test (transport simulation).

2 B04202_05_E00_00 12.11.2021
Ordering information
Configurable Item Standard item11)
K-FS22 – 1 - 2 - 3
Options 1-FS22DI-ST/4CH
1 01 - Standard (ST) - FC/APC; 03 - Standard (ST) - SC/APC; 11 - 19" rack (RM) - FC/ 1-FS22DI-ST/8CH
APC; 13 - 19" rack (RM) - SC/APC
2 500 - Dynamic (up to 1000S/s)
3 120 - 1 optical connector; 420 - 4 optical connectors; 820 - 8 optical connectors
11) Standard Items correspond to a configuration: Standard format and FC/APC connectors. With 4 or 8 optical connectors.

B04202_05_E00_00 12.11.2021

Subject to modifications.
All product descriptions are for general information
only. They are not to be understood as a guarantee
of quality or durability.

HBK FiberSensing S.A.


Rua Vasconcelos Costa 277 · 4470-640 Maia · Portugal
B04202_05_E00_00 12.11.2021
Tel. +351229613010 · Email: 3
info.fs@hbkworld.com · www.hbm.com/fs

You might also like