Maker Tauro en
Maker Tauro en
Maker Tauro en
Description
Tauro range of products have been developed for applications in industrial gear assemblies with high
load requirements and harsh environments. Its careful formulation incorporates the highest quality
bases and additives, improving its extreme pressure and anti-rust performance, its anti-foaming
capacity and its resistance to oxidation.
It is suitable for all kinds of industrial gearboxes, bearings and multipliers, using splash or circulating
lubrication.
Properties
Properties
- Reduce wear under boundary lubrication conditions and extreme pressure
- Excellent thermal stability
- Very good protection against rust, preventing steel corrosion
- High de-emulsifying capacity (quick separation from water)
- Good antifoaming characteristics.
- Resistance to the rupture of the lubricant film.
Quality levels, approvals and recommendations
Technical specifications
UNIT METHOD VALUE
Viscosity at 40 ºC cSt ASTM D 445 68 100 150 220 320 460 680
Flash point ºC ASTM D 92 230 245 260 260 260 260 260
Resistance to rust, A ASTM D 665 Pass Pass Pass Pass Pass Pass Pass
and B
TAN (mg KOH/g) ASTM D 664 0.20 0.20 0.20 0.20 0.20 0.20 0.20
Water separability mín ASTM D <30 <30 <30 <30 <30 <30 <60
1401
FZG, Step 12 DIN 51354 Pass Pass Pass Pass Pass Pass Pass
Timkem load lbs ASTM D 60 min. 60 min. 60 min. 60 min. 60 min. 60 min. 60 min.
2782
The above mentioned characteristics are typical values and should not be considered product specifications.