Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Measurement Protocol/ Quality Control Report Required: Date - 15.01.2024 Ver. - 01 Xometry Europe

    Uploaded by

    mucahitkaraball
    1. This is a measurement protocol and quality control report from Xometry Europe dated January 15, 2024. 2. It provides specifications for a part called PTK1350-LS-P7 made of aluminum alloy to be manufactured, including general tolerances, deburring requirements, and standards for corrosion, scratches and dents. 3. Any discrepancies between the drawing, model or purchase order should be brought to the attention of Xometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Measurement Protocol/ Quality Control Report Required: Date - 15.01.2024 Ver. - 01 Xometry Europe

    Uploaded by

    mucahitkaraball
    12 views1 page
    1. This is a measurement protocol and quality control report from Xometry Europe dated January 15, 2024. 2. It provides specifications for a part called PTK1350-LS-P7 made of aluminum alloy to be manufactured, including general tolerances, deburring requirements, and standards for corrosion, scratches and dents. 3. Any discrepancies between the drawing, model or purchase order should be brought to the attention of Xometry.

    Original Title

    a0b6f743b8b774c2810f62c4e2cfe8e7

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This is a measurement protocol and quality control report from Xometry Europe dated January 15, 2024. 2. It provides specifications for a part called PTK1350-LS-P7 made of aluminum alloy to be manufactured, including general tolerances, deburring requirements, and standards for corrosion, scratches and dents. 3. Any discrepancies between the drawing, model or purchase order should be brought to the attention of Xometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views1 page

    Measurement Protocol/ Quality Control Report Required: Date - 15.01.2024 Ver. - 01 Xometry Europe

    Uploaded by

    mucahitkaraball
    1. This is a measurement protocol and quality control report from Xometry Europe dated January 15, 2024. 2. It provides specifications for a part called PTK1350-LS-P7 made of aluminum alloy to be manufactured, including general tolerances, deburring requirements, and standards for corrosion, scratches and dents. 3. Any discrepancies between the drawing, model or purchase order should be brought to the attention of Xometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    1 2 3 4 5 6 7 8 9 10 11

    MEASUREMENT PROTOCOL/ Xometry Europe


    QUALITY CONTROL REPORT REQUIRED date_15.01.2024
    A

    ver._01
    6
    120

    3.2
    105

    15

    13,5
    4x 11

    48,5
    4

    62
    5
    C

    4x 18

    E
    58

    80
    2
    F

    Material:Aluminium EN AW-6082 / 3.2315 / Al-Si1Mg


    General tolerance DIN ISO 2768 - fine. Parça/Montaj:

    Deburr and break sharp edges.


    Corrosion, scratches and dents are not acceptable. PTK1350-LS-P7
    H If in doubt, ask Xometry (in case of discrepancies between the
    Adet: İsim Tarih
    drawing, the model or PO) Malzeme: Çizim A3
    Onay Ölçek
    PLEASE SEE 3D MODEL FOR UNSPECIFIED DIMENSIONS Kütle: 1st Angle Projection SAYFA 1 / 1

    You might also like