Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    TDS Byk-P 4100 en

    Uploaded by

    Leo Guerrero
    BYK-P 4100 is a processing additive used in filled thermoplastics, PVC plastisols, and PVC calender applications. It reduces torque during compounding of thermoplastics, increases output capacity and melt volume rate. For thermoplastics it also increases tensile strength, modulus, and impact strength. For PVC plastisols it improves release properties and influences cell structure of foams. For PVC calender applications it improves release properties during processing and printability of the final product. It is recommended at levels of 0.25-2% for thermoplastics and 0.1-3% for PVC, with the optimal level determined by testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS Byk-P 4100 en

    Uploaded by

    Leo Guerrero
    15 views2 pages
    BYK-P 4100 is a processing additive used in filled thermoplastics, PVC plastisols, and PVC calender applications. It reduces torque during compounding of thermoplastics, increases output capacity and melt volume rate. For thermoplastics it also increases tensile strength, modulus, and impact strength. For PVC plastisols it improves release properties and influences cell structure of foams. For PVC calender applications it improves release properties during processing and printability of the final product. It is recommended at levels of 0.25-2% for thermoplastics and 0.1-3% for PVC, with the optimal level determined by testing.

    Original Title

    TDS_BYK-P_4100_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    BYK-P 4100 is a processing additive used in filled thermoplastics, PVC plastisols, and PVC calender applications. It reduces torque during compounding of thermoplastics, increases output capacity and melt volume rate. For thermoplastics it also increases tensile strength, modulus, and impact strength. For PVC plastisols it improves release properties and influences cell structure of foams. For PVC calender applications it improves release properties during processing and printability of the final product. It is recommended at levels of 0.25-2% for thermoplastics and 0.1-3% for PVC, with the optimal level determined by testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views2 pages

    TDS Byk-P 4100 en

    Uploaded by

    Leo Guerrero
    BYK-P 4100 is a processing additive used in filled thermoplastics, PVC plastisols, and PVC calender applications. It reduces torque during compounding of thermoplastics, increases output capacity and melt volume rate. For thermoplastics it also increases tensile strength, modulus, and impact strength. For PVC plastisols it improves release properties and influences cell structure of foams. For PVC calender applications it improves release properties during processing and printability of the final product. It is recommended at levels of 0.25-2% for thermoplastics and 0.1-3% for PVC, with the optimal level determined by testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    BYK-P 4100

    Data Sheet
    Issue 10/2020

    BYK-P 4100
    Processing additive for filled, thermoplastic compounds as well as for PVC plastisols
    and PVC calender applications.

    Product Data

    Composition
    Copolymer with acidic groups

    Typical Properties
    The values indicated in this data sheet describe typical properties and do not constitute specification limits.

    Acid value: 14 mg KOH/g


    Density (20 °C): 0.99 g/ml

    Applications

    Thermoplastics

    Special Features and Benefits


    BYK-P 4100 is a surface-active processing additive for use in filled, thermoplastic compounds. During compounding,
    the additive reduces the required torque. The output capacity and the melt volume rate (MVR) are increased.
    The tensile strength, E-modulus and notch impact strength are increased in the finished part. The printability is
    improved.

    Recommended Use

    Mineral fillers X
    Flame retardants X
    Wood plastic composites (WPC) X
    Glass fibers HMC Y
    X especially recommended     Y recommended

    Recommended Levels
    0.25-2% additive (as supplied) based upon the filler.

    The above recommended levels can be used for orientation. Optimal levels are determined through
    a series of laboratory tests.

    Incorporation and Processing Instructions


    Ideally, the additive is added at the same time as the liquids, and then the solids are incorporated.
    Post addition is also possible.
    BYK-P 4100

    Data Sheet
    Issue 10/2020

    PVC applications

    Special Features and Benefits


    BYK-P 4100 is a surface-active processing additive for use in PVC plastisols and PVC calender applications.

    PVC plastisols:
    In PVC plastisols, the additive has very good release properties from gelling drums, release papers,
    flat screens and molds.

    It also influences the cell structure of chemically blown foams and improves the resilience and increases
    the air permeability.

    Only specific PVC types are suitable for open cell foams. An open cell structure can only be achieved
    if the formulation components and process parameters are coordinated to one another. The use of
    BYK-P 4100 can bring about an increased water uptake.

    PVC calender applications:


    In PVC calendar applications, the additive has very good release properties during the processing of soft,
    semi-rigid and rigid PVCs. The printability of the end product is also improved.

    Recommended Levels
    0.1-3 % additive (as supplied) based on the total formulation, depending on the desired effect.

    The above recommended levels can be used for orientation. Optimal levels are determined through
    a series of laboratory tests.

    Incorporation and Processing Instructions


    Ideally, the additive is added at the same time as the liquids, and then the solids are incorporated.
    Post addition is also possible.

    BYK-Chemie GmbH ACTAL®, ADD-MAX®, ADD-VANCE®, ADJUST®, ADVITROL®, ANTI-TERRA®, AQUACER®, AQUAMAT®, AQUATIX®, BENTOLITE®, BYK®, BYK®-DYNWET®,
    P.O. Box 10 02 45 BYK®-MAX®, BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®, BYKO2BLOCK®, BYKOPLAST®, BYKUMEN®, CARBOBYK®, CERACOL®, CERAFAK®,
    46462 Wesel CERAFLOUR®, CERAMAT®, CERATIX®, CLAYTONE®, CLOISITE®, DISPERBYK®, DISPERPLAST®, FULACOLOR®, FULCAT®, GARAMITE®, GELWHITE®, HORDAMER®,
    Germany LACTIMON®, LAPONITE®, MINERAL COLLOID®, MINERPOL®, NANOBYK®, OPTIBENT®, OPTIFLO®, OPTIGEL®, PAPERBYK®, PERMONT®, POLYAD®, PRIEX®,
    Tel +49 281 670-0 PURE THIX®, RECYCLOBLEND®, RECYCLOBYK®, RECYCLOSSORB®, RECYCLOSTAB®, RHEOBYK®, RHEOCIN®, RHEOTIX®, SCONA®, SILBYK®, TIXOGEL®,
    Fax +49 281 65735 VISCOBYK® and Y 25® are registered trademarks of the BYK group.

    [email protected] The information herein is based on our present knowledge and experience. The information merely describes the properties of our products but no
    www.byk.com guarantee of properties in the legal sense shall be implied. We recommend testing our products as to their suitability for your envisaged purpose prior to use.
    No warranties of any kind, either express or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding any products
    mentioned herein and data or information set forth, or that such products, data or information may be used without infringing intellectual property rights
    of third parties. We reserve the right to make any changes according to technological progress or further developments.

    This issue replaces all previous versions – Printed in Germany

    You might also like