0 ratings 0% found this document useful (0 votes) 40 views 2 pages Facts Syllabus
FLEXIBLE AC TRANSMISSION SYSTEMS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here .
Available Formats
Download as PDF or read online on Scribd
Carousel Previous Carousel Next
Save facts syllabus For Later [R-19 Syllabus for EEE - INTUK w. e. £ 2019-20
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA - 533 003, Andhra Pradesh, India
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEER
COURSE STRUCTURE-R19
_ a a
SEMESTER 3 3
FLEXIBLE ALTERNATING CURRENT TRANSMISSION SYSTEMS
(ELECTIVE)
Preamble:
Flexible Alternating Current Transmission System controllers have become a part of modern
power system, It is important for the student to understand the principle of operation of series
and shunt compensators by using power electronics, As the heart of many power electronic
controllers is a voltage source converter (VSC), the student should be acquainted with the
operation and control of VSC. Two modem power electronic controllers are also introduced.
Learning Objectives:
* To learn the basics of power flow control in transmission lines using FACTS controllers
+ To explain operation and control of voltage source converter.
© To understand compensation methods to improve stability and reduce power oscillations
of'a power system.
+ To learn the method of shunt compensation using static VAR compensators.
* To learn the methods of compensation using series compensators
+ To explain operation of Unified Power Flow Controller (UPFC).
Unit:
Introduction to FACTS
Power flow in an AC System — Loading capability limits - Dynamic stability considerations —
Importance of controllable parameters — Basic types of FACTS controllers — Benefits from
FACTS controllers ~ Requirements and characteristics of high power devices — Voltage and
current rating — Losses and speed of switching — Parameter trade-off devices.
Unit:
Voltage source and Current source converters
Concept of voltage source converter (VSC) — Single phase full wave bridge converter — Square
wave voltage harmonics for a single-phase bridge converter — Three-phase full wave bridge
converter — Transformer connections for 12, 24 and 48 pulse operation, concept of Current
Source Converter (CSC), Three-phase current source converter — Comparison of current source
converter with voltage source converter.[R-19 Syllabus for EEE - INTUK w. . £ 2019-20
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA - 533 003, Andhra Pradesh, India
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
COURSE STRUCTURE-R19
Unit:
Shunt Compensators
Objectives of shunt compensation — Midpoint voltage regulation for line segmentation — End of
line voltage support to prevent voltage instability — Improvement of transient stability — Power
oscillation damping — variable Impedance type VAR generator - Thytistor Switched/Controlled
Reactor (TSR/TCR) — Thyristor Switched Capacitor(TSC) — Fixed Capacitor—Thyristor
Controlled Reactor (FC-TCR), Thyristor Switched Capacitor and Thyristor Controlled Reactor
(TSC-TCR), Switching Converter type VAR generator — principle of operation - Comparison of
SVC and STATCOM,
Unit IV:
Series Compensators
Static series compensators: Concept of series capacitive compensation — Improvement of
transient stability — Power oscillation damping — Functional requirements. GTO thyristor
controlled Series Capacitor (GSC) — Thyristor Switched Series Capacitor (TSSC) and Thyristor
Controlled Series Capacitor (TCSC) - Switching Converter type Series Compensation,
Unit_v
Combined Controllers
Voltage and Phase Angle Regulator - TCVR and TCPAR — Switched Converter Based Voltage-
Phase Angle Regulator - Schematic and basic operating principles of Unified Power Flow
Controller (UPFC), Interline Power Flow Controller (IPFC) - Application on transmission lines.
Learning Outcomes:
After the completion of the course the student should be able to:
* understand power flow control in transmission lines using FACTS controllers,
‘* explain operation and control of voltage source converter.
‘* analyze compensation methods to improve stability and reduce power oscillations in the
transmission lines.
‘* explain the method of shunt compensation using static VAR compensators.
‘* understand the methods of compensations using series compensators.
‘+ explain operation of Unified Power Flow Controller (UPFC).
‘Text Books:
1. “Understanding FACTS” N.G.Hingorani and L.Guygi, IEEE Press.Indian Edition is
available:-—Standard Publications, 2001
Reference Books:
1, “Flexible ac transmission system (FACTS)” Edited by Yong Hue Song and Allan T
Johns, Institution of Electrical Engineers, London.
2. Thyristor-based FACTS Controllers for Electrical Transmission Systems, by
R.MohanMathur and Rajiv k. Varma, Wiley.