Nominal Dimension: General Notes When Not Specified

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

NOMINAL DIAMETERS (mm) ISO 261

NOMINAL DIMENSION UNDERSIZE


External Diameter Pitch Diameter
max min max min
M90X4 6h 90 89,52 87,4 87,17
FILETTATURA AL TORNIO
NOMINAL DIAMETERS (mm) ISO 261
NOMINAL DIMENSION UNDERSIZE
External Diameter Pitch Diameter
max min max min
M80X4 6h 80 79,52 77,4 77,17
GENERAL NOTES WHEN NOT SPECIFIED DWG made by:
- Smussare o raccordare spigoli vivi, dove non indicato a 0,5x45° o R0,6 Wrench Toll Hex/Sqr (W):
- Smussi di imbocco e scarico filettatura, dove non indicato = 1,5*P X 30° max W ≤ 30 = h13 | W > 30 = h14
- ø Inizio Smusso = øIniziale-2*Tan(Angolo)*Smusso K.K

- Rugosità generale = Ra 3,2 Hex Corner (emin) = 1,13 Wmin


Square Corner (emin) = 1,3 Wmin DATE REV
TOLLERANCE FOR DIMENSIONS WITHOUT INDICATION ACCORDING TO DIN ISO 2768 (mm) 14/02/2024 0
MATERIAL
0,5-3 3-6 6-30 30-120 120-400 400-1000 1000-2000 2000-4000 COATING
A/SA 320 L43
+/- 0,1 +/- 0,1 +/- 0,2 +/- 0,3 +/- 0,5 +/- 0,8 +/- 1,2 +/- 2 153

PRIG SPEC L43 M90X4X0607 ZNG12 IR SOS8621111 WP080 0430 M90_4X0607 153 00 W29822 DWG N°
W29822

You might also like