The LLC-E-BA Batch Controller is a programmable batch controller mounted in a NEMA 12 industrial enclosure. It is designed for small to medium sized fluid batching systems. The controller allows for programming of nine different batch amounts and monitoring of batch progress via a 4-20 mA indicator. It has relays for valve control and batch counting up or down. The unit compensates for variations in the actual batch amount.
The LLC-E-BA Batch Controller is a programmable batch controller mounted in a NEMA 12 industrial enclosure. It is designed for small to medium sized fluid batching systems. The controller allows for programming of nine different batch amounts and monitoring of batch progress via a 4-20 mA indicator. It has relays for valve control and batch counting up or down. The unit compensates for variations in the actual batch amount.
The LLC-E-BA Batch Controller is a programmable batch controller mounted in a NEMA 12 industrial enclosure. It is designed for small to medium sized fluid batching systems. The controller allows for programming of nine different batch amounts and monitoring of batch progress via a 4-20 mA indicator. It has relays for valve control and batch counting up or down. The unit compensates for variations in the actual batch amount.
The LLC-E-BA Batch Controller is a programmable batch controller mounted in a NEMA 12 industrial enclosure. It is designed for small to medium sized fluid batching systems. The controller allows for programming of nine different batch amounts and monitoring of batch progress via a 4-20 mA indicator. It has relays for valve control and batch counting up or down. The unit compensates for variations in the actual batch amount.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
Rev.
05/04
AW Company
LLC-E-BA Batch Controller in an Industrial Enclosure
Technical Specifications: Nine programmable batch amounts 4-20 mA batch fill indicator NEMA 12 & 13 enclosure Ability to count up or to count down Batch counter & totalizer Two relays for solenoid valve control Batch error compensator Good for small to medium sized systems
What is a LLC-E-BA Batch Controller?
Mounted in a prewired NEMA 12 industrial enclosure, the LLC-E-BA is an easy to use batch controller designed as a central controller for small to medium sized fluid batching systems. Nine different batch amounts can be pre-programmed into long term memory and selected by the operator. Two relays provide control for either single or dual stage valve operation. Two totalizers are provided, one acts as the batch totalizer and the other totalizes continuously with reset protection. The batch counter has a user selectable option to either count up from zero or count down from the batch amount. The units smart programming automatically compensates for variations from the selected batch amount. Inputs provide operator remote control for batch selection, start, stop and reset. 8809 Industrial Drive, Franksville, WI 53126 Phone: (262) 884-9800 Fax: (262) 884-9810 Email: [email protected] www.awcompany.com
Rev. 05/04
AW Company
LLC-E-BA Batch Controller in an Industrial Enclosure
Controller Technical Data Power Supply: 110 VAC Sensor Input: Voltage triggered, 2.00 Vp-p min. 0-4 KHz, 10 Kohm imp. Main Board: 87C51FB processor, EEPROM memory Sensor Supply Output: Approx. 20 mA at 15 VDC Display: LCD, 16 Character alpha-numeric 0.35 inch character height Enclosure: NEMA 12 & 13
Two Form C Relay Outputs:
Relay Contact Ratings: Maximum Switch Voltage: 220V DC, 250 VAC Maximum Switch Current: 2A Maximum Switched Power Resistive Load: DC 60W / AC 125 VA Inductive Load: DC 30W / AC 60 VA Rated Load Resistive Load: DC 30V, 2A / AC 110V 0.5A Inductive Load: DC 30V, 1A / AC 110V 0.3A
BATCH RESET START STOP START
BATCH RESET MODE
LLC BATCH CONTROL
POWER Flow Tot-1 Tot-2 RESET DN MODE UP BATCH PROG SEL ENT
START
START/ STOP LOW FLOW LOW FLOW
ON OFF
Programming Flow
RELAY1
BATCH DONE
START/ STOP
SELECT
RESET
PROG
BATCH HIGH FLOW HIGH FLOW
BATCH
BATCH
R U N
DELAY RELAY2
DELAY PRECUT
AW COMPANY Franksville, WI
FLOWMETER INPUT
BATCH TOTAL
SLOW START
SLOW START
SLOW STOP
BATCH PROGRESS 0 20 mA
ANALOG OUTPUT 4 mA (typ.)
Products may be subject to change without notice - Contact factory for current information
