Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    Rescocast 7

    Uploaded by

    jhunkujha11
    RESCOCAST 7 is a refractory material used to line FCC regenerator and reactor vessels. It has good strength and insulating qualities at an economical cost. It can be applied by gunning, casting, or troweling. RESCOCAST 7 has a maximum service temperature of 2400°F and is composed primarily of alumina, silica, lime, and iron oxide. It has moderate density, strength, and thermal conductivity properties suitable for high temperature applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rescocast 7

    Uploaded by

    jhunkujha11
    94 views1 page
    RESCOCAST 7 is a refractory material used to line FCC regenerator and reactor vessels. It has good strength and insulating qualities at an economical cost. It can be applied by gunning, casting, or troweling. RESCOCAST 7 has a maximum service temperature of 2400°F and is composed primarily of alumina, silica, lime, and iron oxide. It has moderate density, strength, and thermal conductivity properties suitable for high temperature applications.

    Original Title

    rescocast-7

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    RESCOCAST 7 is a refractory material used to line FCC regenerator and reactor vessels. It has good strength and insulating qualities at an economical cost. It can be applied by gunning, casting, or troweling. RESCOCAST 7 has a maximum service temperature of 2400°F and is composed primarily of alumina, silica, lime, and iron oxide. It has moderate density, strength, and thermal conductivity properties suitable for high temperature applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views1 page

    Rescocast 7

    Uploaded by

    jhunkujha11
    RESCOCAST 7 is a refractory material used to line FCC regenerator and reactor vessels. It has good strength and insulating qualities at an economical cost. It can be applied by gunning, casting, or troweling. RESCOCAST 7 has a maximum service temperature of 2400°F and is composed primarily of alumina, silica, lime, and iron oxide. It has moderate density, strength, and thermal conductivity properties suitable for high temperature applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRODUCT DATA

    Brand Name: RESCOCAST 7


    Description: RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength
    combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications.
    Although primarily used as a gunning material, it can also be cast or troweled into place.

    Physical properties shown are average values of samples taken under controlled conditions
    ASTM test methods used where applicable

    Maximum Service Temperature: 2400°F (1316°C)


    Typical Water Required for Mixing (by weight) :
    Cast ……...…. 27.0%
    Predampening for Gunning ……...…. 8.3 - 10.4%
    Casting Data Gunning Data
    Bulk Density (pcf)
    After 1500°F (815°C) 78 (1.25 g/cm3) 90 (1.44 g/cm3)

    Cold Crushing Strength (psi)


    After 1500°F (815°C) 1950 (137 kg/cm2) 2500 (175 kg/cm2)

    Modulus of Rupture (psi)


    After 1500°F (815°C) 250 (18 kg/cm2) 600 (42 kg/cm2)

    Thermal Conductivity (K Factor)


    Mean Temperature BTU/ft2/hr./°F/inch W/mK BTU/ft2/hr./°F/inch W/mK
    500°F (260°C) 3.1 0.39 3.7 0.54
    1000°F (540°C) 2.6 0.33 3.2 0.46
    1500°F (815°C) 2.9 0.39 3.5 0.51

    Permanent Linear Change (%)


    Green to 1500°F (815°C) -0.4 to 0.0 -0.4 to 0.0
    230°F (110°C) to 2400°F (1316°C) -0.3 to 0.0 -0.3 to 0.0

    Typical Chemical Analysis (%)


    (Calcined Basis)
    Alumina (Al2O3) ……………….. 32.4
    Silica (SiO2) ……………….. 45.5
    Lime (CaO) ……………….. 12.8
    Iron Oxide (Fe2O3) ……………….. 4.3
    Titania (TiO2) ……………….. 1.4
    Magnesia (MgO) ……………….. 1.4
    Alkalies (Na2O+K2O) ……………….. 2.2

    Standard Packaging: 50 lb bag. 50 bags per pallet. Bulk packaging available.

    Brand Code: 0334


    The properties shown on this data sheet represent typical average results using standard ASTM test methods (unless otherwise noted) conducted under controlled condition (using
    standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and
    Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice.

    RESCO PRODUCTS disclaims any express or implied warranties based on this sheet.

    03/21/17 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet.

    One Robinson Plaza - Suite 300, 6600 Steubenville Pike, Pittsburgh, PA, 15205 Phone: 888-283-5505

    You might also like